YOU WILL GET ALL TUBES AND PIPES UNDER ONE ROOF Pipes are used mainly for transportation of fluids and gases like water, oil, gas, propane, etc. Casing pipes are used to stabilize the wellbore. They are major structural components of the well, by being cemented with the walls. Production tubing pipes are wellbore tubes through which oil or gas is produced to the pipelines. The finest quality steel is used for processing of Casing & each step of the process is performed with the highest degree of accuracy to meet or exceed API Specifications as well as the Industry Standards. The WEATHEROCK GROUP is known as the best Premium Connection Casing Pipe Manufacturers Supplier.
The process of threading on the Pipe and the Couplings is done on machines. The finished couplings are given anti-galling treatment prior to Buck-on operation. All Casing are subjected to Hydrostatic Testing as required by API Specifications. The finished Casing is externally coated with rust preventive varnish, attached with thread protectors prior to shipment. In the process of piping, a connection nipple is a fitting, consisting of a short piece of pipe, usually provided with a male pipe thread at each end, for connecting two other fittings. It is one of the most popular categories of pipe fittings. It is a connector or a coupling threaded on both ends. They are used to fit straight end hose or pipe. If you need connection nipples for industrial and commercial use then follow the same