Chemline
Valves Piping Flow Meters & Controls
Corrosion Resistance Solid Thermoplastics Your Pipeline To Quality
www.chemline.com
Industrial Municipal Environmental
Supplying innovative long term solutions for the Industrial, Municipal and Environmental Sectors since 1968
55 Guardsman Rd Thornhill, ON Canada, L3T 6L2 Tel: 905.889.7890 Fax: 905.889.8553 request@chemline.com
Chemline Product Lines
Manual Thermoplastic Valves • • • • • • • • • • •
Ball Valves Butterfly Valves Diaphragm Valves Check Valves Ball Float Valves Gate Valves Globe Valves Lab Cocks Needle Valves Strainers Flange Gaskets
Type 21 True Union Ball Valves 3/8" – 4"
ChemFlareTM Connections for True Union Valves
Compact Ball Valves
Type 23 Multi Port Ball Valves
1/2" – 3"
High Capacity Ball Valves 4" & 6"
1/2" – 4"
3/8" – 1"
Size Range Chemline valves are available in a large size range: 1/4" to 96"
Materials PVC valves are least expensive. Other materials offer higher pressure/temperature ratings, chemical and abrasion resistance. For high purity liquids, PP is preferred over PVC. PVDF is used on the highest purity applications. • PVC: 0 - 60oC (30 -140oF) • PP: –20 - 90oC (–5 - 195oF) • CPVC: 0 - 95oC (–30 - 203oF) • PVDF: –40 -120oC (–40 - 250oF) • PDCPD: –20 - 90oC (–5 - 195oF) • FRP: –40 - 120oC (–40 - 250oF)
Cavity Free Ball Valves
Metering & Proportional Ball Valves
Elastomer Seated Butterfly Valves
ChemValve Teflon Lined Butterfly Valves
1/2" – 2"
1-1/2" – 24"
2" – 12"
Giant Butterfly Valves
FRP Damper Butterfly Valves
28" – 48"
12" – 96"
Manual Diaphragm Valves
Pneumatic Diaphragm Valves
1/2" – 6"
1/2" – 2"
PW Series Wafer Check Valves
WP Series Wafer Check Valves
3" – 12"
2" – 40"
Y-Sediment Strainers
Low Torque Flange Gaskets
1/2" – 4"
1/2" – 12"
1/2" – 6"
PVDF Damper Butterfly Valves 1-1/2" – 24"
Ball Float Valves 1/2" – 1-1/2"
Ends • True Union valves are available with Socket, Threaded, Butt (PP & PVDF only), ChemFlareTM (for flared Teflon® tubing) or Flanged connections • Flanged or wafer body valves fit between flanges, require bolts and usually flange gaskets
Ball Check & Foot Valves
Swing Check Valves
1/2" – 4"
3/4" – 8"
Gate Valves 1-1/2" – 14"
Seals • EPDM is the standard seal material • FPM/FKM (Viton®) is selected when better chemical resistance is required • Other elastomers are available depending on application • Diaphragm valves are available with Teflon® diaphragms offering the highest chemical resistance
Globe Valves
Lab Cocks
Needle Valves
1/2" – 4"
1/4"
1/4" – 1/2"
Your Pipeline To Quality Valves, Piping, Flow Meters and Controls
Tel: 905.889.7890 • www.chemline.com
Chemline Product Lines
Actuation & Actuated Valves Electric Actuators • Four different series provide a range of control features and output torques up to 2,655 in.-lb. These will power all Chemline ball and butterfly valves up to 18".
Electromni® Electric
Q Series Electric
V Series Electric
A Series Electric
E Series Electric
PA Series Aluminum Pneumatic
PP Series Plastic Pneumatic
P3 Series Stainless Steel Pneumatic
PH Series High Temperature Pneumatic
PG Series 180o Rotation Pneumatic
Type 730 NC Pneumatic Diaphragm Valves
Type 750 Pneumatic Diaphragm Valves
Type 710 Pneumatic Diaphragm Valves
Type 760 Manual Diaphragm Valves
Type 720 Manual Diaphgram Valves
1/2" – 4"
1/2" – 2"
3/8" & 1/2"
1/2" – 4"
3/8" & 1/2"
SG Series Gauge Isolators
AR Series Air Release Valves
AA Series Air & Vacuum Release Valves
SB17 Mini Back Pressure/Relief Valves
Back Pressure/ Relief & Pressure Reducing Valves
1/2" – 3"
1-1/4" & 3"
1/4" – 3/8"
3/8" – 4"
EK Series Pneumatic Characterized Control Valves
EHK Series Pneumatic High Pressure Characterized Control Valves
EE Series Electric Characterized Control Valves
Variable Area Flow Meters
Pneumatic Actuators • P Series is a premium quality line designed for long cycling life in demanding industrial applications. Output torques are up to 31,300 in.-lb. spring return (SR) and 40,660 in.-lb. double acting (DA) with 80 psi air. They will power all Chemline ball and butterfly valves up to 24" DA and 20" SR
Actuation Service • Chemline supplies actuators separately and actuation service for any metal valves.
700 Series Diaphragm Valves • Modular line of pneumatically actuated and manual weir diaphragm valves up to 4". They share common bodies and diaphragms. Only five different actuators sizes power nine valve sizes (730 Series).
Controls & Flow Meters Gauge Isolators • For any pressure instrument Air Release Valves • Both economical and performance models
Back Pressure/Relief Valves Pressure Regulating/ Reducing Valves Characterized Control Valves • Single seat globe type with
1/4" & 1/2"
a PTFE bellow stem seal, available with a selection of Cv’s characterized either linear or equal percentage.
Variable Area Flow Meters • For water, chemicals or air, maximum 220 USGPM (water)
Stainless Steel Back Pressure/ Relief Valves 1/2" – 1"
1/2" – 4"
3/8" – 2-1/2"
1/2" – 4"
1/2" – 4"
Your Pipeline To Quality Valves, Piping, Flow Meters and Controls
Tel: 905.889.7890 • www.chemline.com
Paddle Wheel Flow Meters & Instrumentation
Flow Sensors • Available in CPVC, PVDF, 316L Stainless Steel or Brass • NEMA 6,6P (IP68) sensors are available for outdoor/ submersible applications • High Accuracy: ± 0.75% of full scale with standard K factor
Direct Mount Flow Sensors
Remote Flow Sensors
Mini Flow Sensors
Ultra Low Flow Sensors
Oval Gear Flow Sensors
No-Flow Switches
Adjustable Flow Switches
Adjustable Ultra Low Flow Switches
Blind Transmitters
Ultra Low Flow Blind Transmitters
Hot-Tap Flow Sensors
Electromagnetic Flow Monitor/ Transmitters
Electromagnetic Hot-Tap Flow Transmitters Electromagnetic Flow Transmitters
Flow Monitor/ Transmitters
Battery Powered Flow Monitor
Batch Controllers
• Excellent low flow measurement. Accurately measures flow velocities down to 0.15 m/s (0.5 to 25 ft./sec.) • ECTFE (Halar®) rotor, ceramic shaft and bearings: Offers long service life on corrosive industrial services
Instruments • Modular Design: 1/4" DIN size instruments can be mounted 3 ways: directly to sensor, remotely to panel or wall mounted
Installation Fittings • Sensor installation fittings are available for all sizes and types of pipes
Direct Mount
Panel Mount
Wall Mount
Tees: 1/2" to 1-1/2" Bolt-On Saddles: 2" to 12" Metal Strap-On Saddles: 3" to 18" Wafer Fittings: 10" and 12" Weld-On Adaptors: 1-1/2" to 24"
Your Pipeline To Quality Valves, Piping, Flow Meters and Controls
Tel: 905.889.7890 • www.chemline.com
Other Chemline Product Lines Digiflow UltraSonics Technology: Complete line of ultrasonic flow measurement equipment, including portable and fixed position transit time flow meters. These meters are ideal for full pipe, liquid flow applications; they are non-invasive and provide a high degree of accuracy. Suited for a wide range of pipe materials, in pipe diameters from 1/4" (6.35 mm) to over 120" (3,048 mm), these meters are designed for long service life and low maintenance cost.
UltraSonics • A complete line of ultrasonic flow measuring equipment, including portable and fixed position transit time flow meters • Ideal for full pipe, liquid flow applications
• Vortex shedding flow meters provide extremely accurate and repeatable flow measurements
Type RVL In-Line
Type RVL In-Line Flare
Type RVL Wafer Style
Vortex Shedding Technology: As a fluid moves aross the internal strut ‘bluff body’, alternating vortices are created causing pressure fluctuations. These fluctuations are detected and converted to an analog signal or pulse output. The frequency of the vostices is directly proportional to the flow. ChemX3 Technology: ph/ORP and conductivity monitors and controllers complete with a variety of sensors, probes and installation fittings.
• pH/ORP and Conductivity sensors and instruments Type C5.02 Conductivity
Type P6.02 pH/ORP
Level Controls • Non-contact ultrasonic level measurement • Ideal for chemicals, oil, water, wastewater • Advanced thermoplastics for the highest corrosion resistance. Designed to withstand harsh environments • Low maintenance • Provides better reliability and accuracy than contact level devices
Your Pipeline To Quality Valves, Piping, Flow Meters and Controls
FlowLine Technology: Sensors emit 4 high frequency sound pulses per second from the base of the transducer. Each pulse travels through the air gap, reflects off the liquid surface and returns to the transducer where its received. The temperature compensated sensor calculates the time interval from pulse transmission to receipt, and translates this into a distance measurement based upon the speed of sound. Flowline sensors feature the patented, auto-adaptive Digital Signal Processing technology that delivers accurate and reliable ultrasonic level measurement from 1m-10m.
Tel: 905.889.7890 • www.chemline.com
Thermoplastic Manifolds Materials/Dimensions: • PVC, CPVC, PP, PE, PVDF, Halar (ECTFE) • 3" to 10" and larger
Applications: • • • • • •
Waste Water Treatment Systems Waste Treatment Systems Ice Rinks Soil Remediation Mixing Tanks in Fish Farms Solar Water Heating
Features & Benefits: Chemline thermoplastic manifolds are fabricated using butt fusion, not hot air hand welding or socket fusion. Saddles are welded by a CNC machine. The resulting product is stronger, more reliable and cost effective. Dimensional tolerances are tighter also. CNC Welding Technology offers: Exact Weld Temperatures, Pressures and Time are Controlled • Better weld quality and resulting reliability Dimensions are Controlled Exactly • Precise dimensional tolerances for spigot
spacing, orientation and offsets Welding Parameters are Recorded and Downloadable (heat, pressure, operation times for heat soak, cooling, etc.) • Manufacturing traceability and quality
assurance Repeatable Manufacturing Process • An identical replacement manifold of the
same quality can be made years later
Other Features: Pressure Tested • For quality assurance Unlimited Branch Options • Spigot, threaded, flanged, hosebarbs, ends for
valves, installation adaptors for flow meters, multiple branch rows and different port sizes.
Approvals: • Available in NSF-61 approved material for
water purification equipment or NSF-pw approved material for potable water use. • Canadian Food Inspection Agency approved
for use with food products (PVDF only). Your Pipeline To Quality Valves, Piping, Flow Meters and Controls
Tel: 905.889.7890 • www.chemline.com
•
No threads
•
No cementing
•
No leaks
•
A superior connection method for dosing system components
•
Designed for sodium hypochlorite and other aggressive services
•
Flare connections are easy and quick to install, are easily disassembled and add no dead volume
•
PVC, CPVC or PVDF
•
1/2", 3/4" and 1"
Electromagnetic Flow Transmitters Less costly and easier to install & remove compared to full-port magmeters • Local LCD display is now available • Hot-Tap version is available • Installation fittings are available for all types and sizes of pipe •
Type F9.60/F9.63
Mini Flow Sensors & Tee Fittings •
Low cost
•
Compact size
•
Designed for water treatment equipment
•
Rugged and reliable
•
PVC Tee fittings available 1/2" to 1-1/2"
Type F3.10 & Tee Fitting
Your Pipeline to Quality Valves, Piping, Flow Meters and Controls
Tel: 905.889.7890 • www.chemline.com
Other Chemline Product Lines
Teflon Tube, Fittings, Valves & Piping ®
• PFA Tube, ChemFlareTM Fittings, Valves & Tools 1/8" to 1" • ChemBondTM PFA Butt Weld Pipe & Fittings 1/2" to 2" and Butt Weld Tube Fittings 1/4" to 1"
Piping Systems • Polypropylene (PP) Pipe & Fittings 1/2" to 56" • PolyPure® Unpigmented PP Piping System 1/2" to 4" • PVDF Pipe & Fittings to 12” • ECTFE (Halar®) Pipe & Fittings 1" to 4" • AirPro® Polyethylene Piping System 1/2" to 4" • Sani-Tech® PP & PVDF Piping Systems 1/2" to 4" • Dual Containment Pipe & Fittings • Custom Fabrication • Manifold Fabrication
Polypropylene butt welded piping installation
PE manifold produced on Chemline’s CNC saddle welding machine
Pipe Welding Machines • For PP, PE, PVDF, PFA or ECTFE pipe, fittings and valve ends • Butt or socket fusion models available for rent or purchase • Butt welding machines types are heating element or non-contact infra red (IR) • Field or shop fabrication machines available for all pipe size ranges
Maxiplast Heating Element Butt Welder for Field or Shop
Your Pipeline To Quality Valves, Piping, Flow Meters and Controls
55 Guardsman Road Thornhill, Ontario Canada, L3T 6L2 Tel: 905.889.7890 Fax: 905.889.8553 www.chemline.com
4001 Heating Element Butt Welding Shop Machine
Debeaders, Pipe Saws & Other Fabrication Tools
CPCB 3-11 ©Chemline Plastics Limited 2011