Product Guide
MAS CA 08/05
www.mastewart.com
Contents B series ball valves
B-1F: full/large port, 2 piece, NPT B-2F: full port, 2 piece, solder end B-3: full port, 2 piece, NPT B-4: full port, 2 piece, solder end B-5C: full port, compression ends B-3D: full port, 2 piece, NPT, drain B-4D: full port, 2 piece, solder end, drain B-1 PEX: full port, 2 piece, PEX end B-1D PEX: full port, 2 piece, PEX end, drain B3-L: 3-way reduced L-port, 2 piece BZ-3SS: full port, 2 piece bronze B-520: full port, brass & bronze, EzPress female B-523: full port, brass, EzPress male
700 check valve
700: forged brass, spring loaded check
1.1 1.1 1.2 1.3 1.3 1.4 1.4 1.5 1.5 1.6 1.6 1.7 1.7
1.8
B series bronze gate valve B-GL: bronze, quick opening
A series gas ball valves
327: NPT x flare, 2 piece 325 SH: square head, NPT x NPT, 2 piece 326: NPT x NPT, 1 piece 315 SH: square head, NPT x NPT, 2 piece
C series carbon steel ball valves CSSDR-1: reduced port, 1 piece, NPT CSCR-2: large port, 2 piece, NPT CSS-F-2: full port, 2 piece, NPT CSS-F-3N: full port, 3 piece, NPT CSS-F-3N-SW: full port, 3 piece, SW & BW CSS-F-3-HD-FS: full port, 3 piece, NPT
G series stainless steel ball valves G1: reduced port, 1 piece, NPT G2E: full port, 2 piece, NPT G2: full port, 2 piece, NPT G2-ED: full port, 2 piece, NPT G3-ED: full port, 3 piece, NPT G3/G3-7: full port, 3 piece, NPT G3SW: full port, 3 piece, socket weld G-3-HD-FS: full port, 3 piece, NPT G4: reduced, 3 way, L port, NPT
F series flanged ball valves Product order code information F-150-CS-R F-150-CS-F F-300-CS-R F-300-CS-F F-600-CS-R F-600-CS-F F-150-SS-R F-150-SS-F F-300-SS-R F-300-SS-F F-600-SS-R F-600-SS-F
Additional products & services
JMC, Red-White/Toyo, Kitz, Apollo, Bonney Forge Moygro, Flow Control, American, Demco, Mueller, W-K-M, Max-Air/MAS, automation, fittings
1.8
2.1 2.1 2.2 2.2
3.1 3.2 3.3 3.4 3.5 3.6
4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9
5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 5.9 5.10 5.11 5.12 5.13
6.1
Technical data, dimensions, materials & specifications are subject to change without notice. Please refer to our web site for current product specs.
MASCA CA16/08/05 08/05 MAS
Product Catalogues M.A. Stewart has a wide selection of products available. Ask us about other valves, fittings and automation, or check on line at: www.mastewart.com
B Series Forged Brass Ball Valves
B-2F
B-1F Full port (1/2" to 2")
Full port
Large port (2 /2", 3" & 4")
Two piece body
NPT threads to manufacturer’s standard
Blowout-proof stem
Two piece body
Adjustable packing gland
Blowout-proof stem
Class 150 WSP, 400 WOG
Adjustable packing gland
ANSI B16.22 solder ends (CXC)
Class 150 WSP
Markings to MSS-SP25
1
1.1
/2" to 2": 600 WOG
1
21/2" to 4": 400 WOG Markings to MSS-SP25 A
A
B
D
C
m
D
size (in.) A mm/in B mm/in C mm/in D mm/in CV Weight lb/kg
S
PSIG 600
I
M
/2 91.5 3.60 53.7 2.11 48.8 1.92 15.0 0.59 15 0.50 0.20
E
/4 91.5 3.60 57.5 2.26 56.0 2.20 20.0 0.79 30 0.7 0.30
1
1 126.5 4.98 66.0 2.60 65.4 2.57 25.1 0.99 60 1.0 0.45
3
E
A
B
N A M E / M AT E R I A L 1. Lever / Steel ASTM A36 Zinc Platedi 2. Screw / Steel ASTM A36 Zinc Platedi 3. Gland Nut / Brass ASTM B124-C37700 4. Packing / Teflon PTFEi 5. Stem / Brass ASTM B124-C37700i 6. Cap / Brass B283-C37700 7. Seats / Teflon PTFE 8. Body / Brass B283-C37700 9. Ball / Chrome Plated B124-C37700i
N
S
11/4 126.5 4.98 72.5 2.85 78.0 3.07 32.0 1.26 110 1.9 0.85
11/2 142 5.59 82 3.23 91.2 3.59 40.0 1.57 130 2.7 1.25
T
R
I
O
2 142 5.59 89.5 3.52 107.3 4.22 50.0 1.96 360 4.1 1.85
A
N
S
21/2 143 5.63 90 3.54 118 4.64 50 1.96
3 200 7.87 118 4.65 141 5.55 65 2.55
10.427 4.73
T
D
C
m
m
N
D
I
size (in.) A mm/in B mm/in C mm/in D mm/in CV Weight lb/kg
4 281 11.06 132 5.20 163 6.41 80 3.14
17.460 26.212 7.92 11.89
I
N A M E / M AT E R I A L 1. Lever / Steel ASTM A36 Zinc Platedi 2. Screw / Steel ASTM A36 Zinc Platedi 3. Gland / Brass ASTM B124-C37700i 4. Stem / Brass ASTM B124-C37700i 5. Packing / Teflon PTFEi 6. Body / Brass B283-C37700i 7. Ball /Chrome Plated B124-C37700ii 8. Cap / Brass B283-C37700i 9. Seats / Teflon PTFEi
G
S
KPAG PSIG 4136 400
M
/2 91.5 3.60 53.7 2.11 54.0 2.13 15.0 0.59 15 0.4 0.20
E
E
N
/4 91.5 3.60 57.5 2.26 73.0 2.87 20.0 0.79 30 0.6 0.25
1
A
S
I
1 126.5 4.98 66.0 2.60 86.0 3.39 25.0 0.98 60 1.2 0.55
3
T
R
A 1
500 1/2"
N
S
11/2 142.0 5.59 82.0 2.23 115.0 4.53 40.0 1.57 130 2.3 1.05
T
I
m
2 142.0 5.59 89.5 3.52 140.0 5.51 50.0 1.97 360 4.1 1.85
N
G
KPAG 2758
/2"- 2"
3447 300
2068
2758 200
1379
2068 100
689
- 2"
400 300
21/2"- 4"
200
O
11/4 126.5 4.98 72.5 2.85 99.0 3.90 32.0 1.23 110 1.4 0.60
1379 689
100 -20
0
50
100
150
200
250
300
350
400
(°F)
-29
-18
10
38
66
93
121
149
177
204
(°C)
0
-20
0
50
100
150
200
250
300
350
400
0 (°F)
-29
-18
10
38
66
93
121
149
177
204
(°C)
Solder ends subject to limits as specified by ANSI B16.22
MAS MASCA CA 11/08/05 0304 MAS CA 08/05
B Series Forged Brass Ball Valves
B-3 Full port / Two piece body Blowout-proof stem
1.2
Adjustable packing gland Chrome plated ball Class 150 WSP, 600 WOG ANSI B1.20.1 NPT B3SH (square head) also available (1" - 2")m
CRN number available on request Markings to MSS-SP25
A
CAN / CGA 3.16, 9.1-M97, CR91-002 ANSI / ASME Z21.15, 16.33, US REQ 3-88 B
N A M E / M AT E R I A L 1. Lever / Steel ASTM A36 2. Lever Retaining Nut / Steel ASTM A36 3. Gland / Brass ASTM B124-C37700 4. Packing / Teflon PTFE 5. Stem / Brass ASTM B124-C37700 (316 SS on model B-3SS) 6. Cap / Brass B283-C37700 7. Seats / Teflon PTFE 8. Body / Brass B283-C37700 9. Ball / Chrome Plated Brass Alloy (316 SS on model B-3SS) 10. Wing Handle / Zinc Plated Steel (1/4" -2")
D
C
(1/4" to 2")
B3W (wing handle)
B3LL (Optional latch lock: 1/4" - 2")
m
D
I
size (in.) A mm/in B mm/in C mm/in D mm/in CV Weight lb/kg
/4 83 3.27 39.4 1.55 39 1.53 10 0.39 8 0.573 0.26
/8 83 3.27 39 1.54 39 1.53 10 0.39 8 0.529 0.24
1
S
PSIG 600
M 3
E
/2 91.5 3.60 54 2.12 54 2.12 15 0.59 15 1.212 0.55 1
A
E
S
m
/4 1 11/4 11/2 2 21/2 3 91.5 126.5 126.5 141.5 141.5 200 281 3.60 4.98 4.98 5.57 5.57 7.87 11.06 57.5 65.3 70 83.3 91 118 132 2.26 2.57 2.76 3.28 3.58 4.65 5.20 64 74 86 99 113 141 163 2.52 2.91 3.38 3.89 4.44 5.55 6.41 20 25 32 40 50 65 80 0.78 0.98 1.25 1.57 1.96 2.55 3.14 30 60 110 130 360 450 620 1.367 2.403 3.483 5.577 8.774 16.203 25.704 0.62 1.09 1.58 2.53 3.98 7.35 11.66
N
S
I
O
N
4 281 11.06 144.5 5.69 188 7.4 100 3.93 1200 42.767 19.4
3
T
R 1/4"
3"- 4"
A
T
I
N
G
KPAG 4136
- 11/2"
500
3447
400
2758
2"- 21/2"
300
2068
200
1379
100
689 -20
0
50
100
150
200
250
300
366
392
(F)
-29
-18
10
38
66
93
121
149
185
200
(C)
MAS MASCA CA26/07/05 08/05
B Series Forged Brass Ball Valves
B-4
B-5C
Full port
Full port, Two piece body
Two piece body
Blowout-proof stem
Blowout-proof stem
Chrome plated ball
Adjustable packing gland
Compression ends for use with type K L & M copper tube
Chrome plated ball
1.3
Class 150 WSP, 600 WOG
Class 150 WSP, 600 WOG
(1" 500 WOG)
ANSI B16.22 solder ends (CXC)
markings to MSS-SP25
CRN number available on request
CRN number available on request
markings to MSS-SP25
L A
N A M E / M AT E R I A L 1. Lever / Steel ASTM A36 2. Lever Retaining Nut / Steel ASTM A36 3. Gland / Brass ASTM B124-C37700 4. Stem / Brass ASTM B124-C37700 5. Packing / Teflon PTFE 6. Cap / Brass B283-C37700 7. Ball / Chrome Plated Brass Alloy 8. Body / Brass B283-C37700 9. Seats / Teflon PTFE 10. Wing Handle / Zinc Plated Steel
B
D
C
N A M E / M AT E R I A L 1. Handle / Steel ASTM A362. Screw / Steel ASTM A363. Stem / Brass ASTM B124-C377004. O Ring / NBR ME09955. Ball / Chrome Plated Brass Alloy6. Cap / Brass ASTM B283-C377007. Nut / Brass ASTM B283-C377008. Ferrule / Brass ASTM C272009. Body / Brass ASTM B283-C3770010. Seats / PTFE 11. Wing Handle / Zinc Plated Steel
H
AP
C B
B4W (wing handle for 1/2" - 2" only) B-5CW (wing handle) m
D size (in.) A mm/in B mm/in C mm/in D mm/in CV Weight lb/kg
S
PSIG 600
M
E
N
/2 92.5 3.64 54 2.12 54 2.12 15 0.59 15 1.212 0.55
I
/4 92.5 3.64 57.5 2.26 73 2.87 20 0.78 30 1.455 0.66
1 128 5.04 66.5 2.62 86 3.38 25 0.98 60 2.557 1.16
11/4 128 5.04 72 2.83 99 3.89 32 1.25 110 3.615 1.64
E
A
1
3
T
S
I
11/2 143 5.63 82 3.23 116 4.57 40 1.57 130 5.974 2.71
2 143 5.63 90 3.54 140 5.51 50 1.96 360 9.457 4.29
R 1/4"
3"- 4"
A
O
N
S
21/2 280 11.02 119 4.69 169 6.65 65 2.56 450 7.5 3.40
3 280 11.02 130 5.12 196 7.72 78 3.07 620 10.9 4.90
I
N
T
m 4 281 11.06 143 5.63 237 9.33 100 3.94 1200 17.2 7.80
m /2
1
/4
3
1
G
KPAG PSIG 4136 600
S
I
M
A 15.97 0.65 22.32 0.91 28.7 1.17
E
E
B 57 2.33 69 2.82 78 3.18
A
N C 12.7 0.52 14 0.57 16 0.65
T
S
I
H 45 1.77 48.5 1.98 52.5 2.07
L 91.5 3.60 91.5 3.60 126.5 4.98
R
A
O
N
P 15 0.61 20 0.79 25 0.98
T
S CV 15 30 60
I
m Weight 0.55 250 0.79 360 1.28 580
N
G
KPAG 4136
- 11/2"
500
3447
400
D
mm/inches
2758
2"- 21/2"
500
3447 1/2" - 3/4"
400
2758
1"
300
2068
300
200
1379
200
1379
100
689
100
689
2068
-20
0
50
100
150
200
250
300
366
392
(F)
-20
0
50
100
150
200
250
300
366
392
(F)
-29
-18
10
38
66
93
121
149
185
200
(C)
-29
-18
10
38
66
93
121
149
185
200
(C)
Solder ends subject to limits as specified by ANSI B16.22
MAS MASCA CA22/08/05 08/05
B Series Forged Brass Ball Valves with Drain
B-4D
B-3D Full port
Full port
Two piece body
Two piece body Blowout-proof stem
1.4 Blowout-proof stem Adjustable packing gland
Adjustable packing gland
600 WOG, ANSI B1.20.1 NPT
600 WOG
Markings to MSS - SP25
Markings to MSS - SP25
NPT threads to manufacturer’s standard
ANSI B16.22 solder ends (CXC)
CRN number available upon request
CRN number available upon request A
A
B
B
N A M E / M AT E R I A L 1. Lever / Steel ASTM A36 2. Retaining Screw / Steel ASTM A36 3. Gland Nut / Brass ASTM B124-C37700 4. Packing Ring / Teflon PTFE 5. Stem / Brass ASTM B124-C37700 6. Body / Brass B-283-C37700 7. Seat / Teflon PTFE 8. Body / Brass B-283-C37700 9. Ball / Brass B283-C37700 10. Cap Washer / EPDM 50/60 SH 11. Plug / Brass B124-C37700
D
C
m
D
I
size (in.) A mm/in B mm/in C mm/in D mm/in CV Weight lb/kg
S
M
E
N
S
/2 91.5 3.60 54.4 2.14 53.0 2.08 15.0 0.59 15 0.56 0.254
E
A
I
O
N
/4 91.5 3.60 57.8 2.28 62.0 2.44 20.0 0.78 30 0.78 0.353
1
T
R
A
S
D
C
m
m
1 126.5 4.98 66.3 2.61 71.0 2.80 25.0 0.98 60 1.25 0.567
3
T
I
N
N A M E / M AT E R I A L 1. Lever / Steel ASTM A36 2. Retaining Screw / Steel ASTM A36 3. Gland Nut / Brass ASTM B124-C37700 4. Gasket / Teflon PTFE 5. Seats / Teflon PTFE 6. Stem / Brass ASTM B124-C37700 7. Body / Brass B-283-C37700 8. Body / Brass B-283-C37700 9. Ball / Brass B283-C37700 10. Cap Washer / EPDM 50/60 SH 11. Plug / Brass B124-C37700
D
I
M
size (in.) A mm/in B mm/in C mm/in D mm/in CV Weight lb/kg
G
S
E
N
S
/2 91.5 3.60 54.4 2.14 56.5 2.22 15.0 0.59 15 0.59 0.267
E
A
I
O
N
/4 91.5 3.60 57.8 2.28 75.0 2.95 20.0 0.78 30 0.78 0.353
1
T
R
S
m
1 126.5 4.98 66.3 2.61 87.0 3.43 25.0 0.98 60 1.25 0.567
3
A
T
I
N
G
KPAG 4136
PSIG 600
500
3447
500
3447
400
2758
400
2758
300
2068
300
2068
200
1379
200
1379
100
689
100
689
PSIG 600
KPAG 4136
-20
0
50
100
150
200
250
300
366
392
(°F)
-20
0
50
100
150
200
250
300
366
392
(°F)
-29
-18
10
38
66
93
121
149
185
200
(°C)
-29
-18
10
38
66
93
121
149
185
200
(°C)
Solder ends subject to limits as specified by ANSI B16.22
MAS MAS MASCA CA CA 22/08/05 08/05 0404
B Series Forged Brass PEX Valve
B-1PEX
B-1D PEX
Mini Ball valve for PEX tubing
Mini Ball valve with drain for PEX tubing
CSA B-137.5
CSA B-137.5
Large port
Large port
Two piece body
Two piece body
Blowout-proof stem
Blowout-proof stem
Chrome plated ball
Chrome plated ball
Class 150 WSP, 400 WOG
Class 150 WSP, 400 WOG
1.5
L L
H
N A M E / M AT E R I A L 1. Handle / Steel ASTM A36. 2. Handle Screw / Steel ASTM A36. 3. Stem / Brass ASTM B124-C37700. 4. O Ring / NBR 70 SH Rubber. 5. Ball / Chrome Plated Brass Alloy. 6. Cap / Brass B283-C37700. 7. Body / Brass B283-C37700. 8. Seat / PTFE.
H
P
A
C B
m
D size (in.) /2
1
/4
3
1
PSIG
S
I A mm/in 12.0 0.47 16.9 0.67 21.7 0.85
E
M
E
B mm/in 60.0 2.36 64.0 2.52 80.0 3.15
A
N
C mm/in 16.0 0.63 16.0 0.63 21.0 0.83
S H mm/in 40.0 1.57 41.8 1.65 47.0 1.85
T
R
I
O
L mm/in 26.0 1.02 26.0 1.02 31.0 1.22
A
N
P mm/in 10.0 0.39 12.7 0.50 18.0 0.71
T
S CV 7 13 27
I
P
A
C
B
m
m
G
D size (in.)
Weight lb/kg 0.55 0.250 0.79 0.360 1.28 0.580
N
N A M E / M AT E R I A L 1. Handle / Steel ASTM A36. 2. Lever Screw / Steel ASTM A36. 3. Stem / Brass ASTM B124-C37700. 4. O Ring / NBR 70 SH Rubber. 5. Ball / Chrome Plated Brass Alloy. 6. Cap / Brass B283-C37700. 7. Body / Brass B283-C37700. 8. Seat / PTFE. 9. Plug / Brass ASTM B124-C37700. 10. Cap Washer / NBR NSF Approved.
/2
1
/4
3
1
KPAG PSIG
S
I A mm/in 12.0 0.47 16.9 0.67 21.7 0.85
E
M
E
B mm/in 68.0 2.78 71.0 2.80 87.5 3.44
A
N
C mm/in 16.0 0.63 16.0 0.63 21.0 0.83
S H mm/in 40.0 1.57 41.8 1.65 47.0 1.85
T
R
I
O
L mm/in 26.0 1.02 26.0 1.02 31.0 1.22
A
N
P mm/in 10.0 0.39 12.7 0.50 18.0 0.71
T
S CV 7 13 27
I
m Weight lb/kg 0.55 0.250 0.79 0.360 1.28 0.580
N
G
KPAG
400
2758
400
2758
300
2068
300
2068
200
1379
200
1379
100
689
100
689
0 -20
0
50
100
150
200
250
300
366
392
0 (째F)
0 -20
0
50
100
150
200
250
300
366
392
0 (째F)
-29
-18
10
38
66
93
121
149
185
200
(째C)
-29
-18
10
38
66
93
121
149
185
200
(째C)
MAS MAS CA CA 08/05 0304
B Series Forged Brass & Cast Bronze Ball Valves
B3-L
BZ-3SS
Three -Way L-Port
Full Port / Two Piece Bronze Body
Reduced Port
Blowout-Proof Stem
1.6 Two Piece Body Blowout-Proof Stem
Adjustable Packing Gland 316SS Ball & Stem
Chrome Plated Ball
Locking Handle
Class 150 WSP, 400 WOG
Class 150 WSP, 600 WOG
Panel Mounting Holes
ANSI B1.20.1 NPT
Markings to MSS-SP25
Markings to MSS-SP25
CRN Number Available On Request
CRN Number Available on Request A
E
N A M E / M AT E R I A L 1. Handle / Steel ASTM A36. 2. Handle Screw / Steel ASTM A36. 3. O Ring 2031 / NBR 70 SH Rubber. 4. O Ring / Viton. 5. Stem / Brass ASTM B124-C37700. 6. Ball / Brass ASTM B124-C37700.. 7. Cap / Brass B283-C37700. 8. Seat / PTFE. 9. Body / Brass B283-C37700.
D
A
B
C
m
D size mm/in A mm/in B mm/in C mm/in D mm/in E mm/in CV Weight lb/kg
PSIG
S
M
E
10 3 /8 10.0 0.39 28.5 0.96 49.0 1.93 34.5 1.36 81.0 3.19 1.2 0.08 0.167
I
15 1 /2 10.0 0.39 28.5 0.96 56.0 2.20 34.5 1.36 81.0 3.19 3 0.09 0.205
20 3 /4 15.2 0.59 34.0 1.34 68.0 2.68 47.5 1.87 91.5 3.60 5.5 0.17 0.384
N
E
A
S
25 1 20.2 0.80 40.0 1.57 80.0 3.15 50.5 1.99 91.5 3.60 12 0.25 0.551
T
I
32 11/4 25.0 0.98 45.5 1.79 91.0 3.58 54.0 2.13 126.5 4.98 18 0.41 0.896
R
A
O 40 11/2 32.0 1.26 51.0 2.01 102.0 4.02 59.5 2.34 126.5 4.98 30 0.60 1.315
T
N
S
50 2 40.0 1.57 60.0 2.36 120.0 4.72 73.4 2.89 141.5 5.57 39 1.01 2.215
65 21/2 50.0 1.97 71.0 2.80 142.0 5.59 81.5 3.21 141.5 5.57 65 1.70 3.750
I
N
D
C
m
m
80 3 65.0 2.56 84.5 3.33 169.0 6.65 103.3 4.07 281.3 11.07 115 2.66 5.851
G
N A M E / M AT E R I A L 1. Handle / SS AISI type 430. 2. Lever Screw / SS AISI type 430. 3. Packing Nut / Br ASTM B124-C37700 4. Packing Ring / PTFE. 5. Stem / SS ASTM A276 type 316.. 6. Cap / Bronze ASTM B-62. 7. Seat / PTFE 8. Body / Bronze ASTM B-62.. 9. Ball / SS ASTM A276 type 316..
B
D
I
size mm/in A mm/in B mm/in C mm/in D mm/in CV weights lb/kg
10 3 /8 81.0 3.19 39.4 1.55 46.0 1.81 10.0 0.39 8 0.06 0.133
S
E
M
E
15 1 /2 91.5 3.60 54.0 2.13 57.0 2.24 15.0 0.59 15 0.12 0.273
20 3 /4 91.5 3.60 57.5 2.26 67.0 2.64 20.0 0.79 30 0.17 0.372
A
T
N
S
25 1 126.5 4.98 65.3 2.57 77.0 3.03 25.0 0.98 60 0.26 0.584
R
I
32 11/4 126.5 4.98 70.8 2.79 91.0 3.58 32.0 1.26 110 0.43 0.938
A
T
O 40 11/2 141.5 5.57 83.3 3.28 103.0 4.06 40.0 1.57 130 0.73 1.617
I
N 50 2 141.5 5.57 91.0 3.58 122.0 4.80 50.0 1.97 360 1.15 2.540
N
S 65 21/2 281.3 11.07 119.3 4.70 153.0 6.02 65.0 2.56 450 2.32 5.123
G
m 80 3 281.3 11.07 130.8 5.15 179.2 7.06 80.0 3.15 620 3.74 8.241
KPAG
PSIG
400
2758
800
5516
300
2068
600
4137
200
1379
400
100
689
200
KPAG
3/8" - 2"
2758 1379
21/2 - 3"
0 -20
0
50
100
150
200
250
300
366
392
0 (째F)
0
0
50
100
150
200
250
300
350
400
0 (째F)
-29
-18
10
38
66
93
121
149
185
200
(째C)
18
28
38
65
93
121
149
177
204
(째C)
MAS MASCA CA22/07/05 08/05
B Series /EzPress Ball Valves
B-520
B-523
600# WOG full port brass & bronze construction
600# WOG full port brass construction Chrome plated ball
Chrome plated ball
PTFE seats: drip-tight positive shut-off
photo to come
PTFE seats: drip-tight positive shut-off Double EzPress female ends
Male ends compatible with press-style fittings
Compatible with most tool systems
Compatible with most tool systems
Blow-out proof stem
Blow-out proof stem
Heavy duty stem nut
Heavy duty stem nut
MSS-SP-110
MSS-SP-110
Part of the EzFit family of problem-solving products
Part of the EzFit family of problem-solving products
L
L
H
A
P
C B
m
D size (in.) A mm/in B mm/in C mm/in H mm/in L mm/in P mm/in CV Weight lb/kg
I
M
/2 16.2 0.638 83.1 3.27 20.1 0.79 54.1 2.13 91.4 3.60 15.2 0.60 15 0.55 0.25 1
E /4 22.4 0.882 100.1 3.94 23.1 0.91 57.4 2.26 91.4 3.60 19.8 0.78 30 0.80 0.36 3
1.7
photo to come
N A M E / M AT E R I A L 1. Handle / ASTM A36 Dacromet plated 2. Nut / ASTM A36 Zinc plated 3. Packing Nut/Brass ASTM B124-C37700 4. Packing Ring / PTFE 5. Stem / Brass ASTM B124-C37700 6. Body Cap / Bronze ASTM B62-C83600 7. Body / Bronze ASTM B62-C83600 8. Seat / PTFE 9. Ball / Cr. Pl. Brass ASTM B124-C37700 10. O-Ring / EPDM Perox
N
S 1 28.9 1.138 116.1 4.57 24.1 0.95 65.5 2.58 126.5 4.98 25.4 1.00 60 1.32 0.60
I 11/4 35.4 1.394 128.0 5.04 25.9 1.02 71.1 2.80 126.5 4.98 32.0 1.26 110 2.00 0.91
O
N 11/2 41.7 1.642 151.9 5.98 36.1 1.42 83.6 3.29 141.5 5.57 39.9 1.57 130 3.08 1.40
S
m
H
A
P
C B
m
2 54.4 2.142 177.0 6.97 40.1 1.58 90.9 3.58 141.5 5.57 50.8 2.00 360 4.54 2.06
• Maximum operating temperature is 130°C (266°F) • Maximum operating pressure at 93°C (200°F) is 4137 KPAG (600 PSI) • Maximum connection pressure is 1379 KPAG (200 PSI)
D size (in.) A mm/in B mm/in C mm/in H mm/in L mm/in P mm/in CV Weight lb/kg
I
M
/2 15.7-15.8 0.62-0.623 84.1 3.31 24.9 0.98 54.1 2.13 91.4 3.60 15.0 0.59 15 0.46 0.21 1
E /4 22.1-22.4 0.87-0.88 96.5 3.80 27.9 1.10 56.9 2.24 91.4 3.60 20.0 0.79 30 0.64 0.29 3
N
N A M E / M AT E R I A L 1. Handle / ASTM A36 Dacromet plated 2. Nut / ASTM A36 Zinc plated 3. Packing Nut/Brass ASTM B124-C37700 4. Packing Ring / PTFE 5. Stem / Brass ASTM B124-C37700 6. Body Cap / Brass UNS C35330 (DZR) 7. Body / Brass UNS C35330 (DZR) 8. Seat / PTFE 9. Ball / Cr. Pl. Brass ASTM B283-C37700
S
1 28.4-28.7 1.12-1.13 102.1 4.02 27.9 1.10 65.0 2.56 127.0 5.00 25.0 0.98 60 1.00 0.45
I 11/4 34.8-35.1 1.37-1.38 122.9 4.84 33.0 1.30 70.6 2.78 127.0 5.00 32.0 1.26 110 1.55 0.70
O
N 11/2 41.1-41.4 1.62-1.63 157.0 6.18 43.9 1.73 83.1 3.27 142.0 5.59 40.1 1.58 130 2.37 1.08
S
• Maximum operating temperature is 149°C (300°F) • Maximum operating pressure at 93°C (200°F) is 4137 KPAG (600 PSI) • Maximum connection pressure is dependent on the pipe fittings and O-Ring material types.
MAS MASCA CA04/08/05 08/05
m
2 53.8-54.1 2.12-2.13 179.1 7.05 49.0 1.93 90.4 3.56 142.0 5.59 50.0 1.97 360 3.56 1.62
Forged Brass Spring Loaded Check & Lever Operated Gate Valves
700
B-GL
Threaded ends to ANSI B1.20.1
Large port
Each valve individually tested
Quick opening Lever operated
1.8 Deeper threads – improved connections
NPT ends ANSI ASME B1.20.1
200 PSI non-shock cold water, oil, gas
Class 125 WSP, 200 WOG
May be installed horizontally or vertically
A
A
C
1. 2. 3. 4. 5. 6.
H
C
P Ø
N A M E / M AT E R I A L Body / Forged Brass ASTM B283; C37700 Stem / Hostaform (POM) Spring / 316 Stainless Steel Disc / Rubber – NBR 70SH Connector/Forged Brass ASTM B283; C37700 Sealant / Loctite
1. 2. 3. 4. 5. 6. 7. 8. 9. 10.
B
C
D
WARNING: Do not use for reciprocating air compressor service.
D
size (in) A mm/in C mm/in H mm/in P mm/in Cv(G/M) pc/case net/pc(lb) net/ctn(lb)
S
I /4 27 1.06 10 0.39 45 1.77 8 0.31
M
E
N
S
1 3 /8 /2 /4 1 27 30 37 45 1.06 1.18 1.46 1.77 10 11 12 13 0.39 0.43 0.47 0.51 45 48 53 59 1.77 1.89 2.09 2.32 10 15 20 25 0.39 0.59 0.79 0.98 3.2 4.5 8 12 80 180 90 72 0.22 0.24 0.35 0.70 19.32 44.00 33.79 52.58
1
3
E
A
T
I
O
N
S
11/4 11/2 2 21/2 3 56 63 79 103 120 2.20 2.48 3.11 4.06 4.72 14 15 16 18 20 0.55 0.59 0.63 0.71 0.79 67 70 80 93 102 2.64 2.76 3.15 3.66 4.02 32 40 50 65 80 1.26 1.57 1.97 2.56 3.15 21 28 47 70 105 48 48 12 4 4 1.06 1.06 1.63 4.14 4.40 52.80 52.80 21.34 18.26 19.32
R
A
T
I
N
m
m
G
D
size mm/in A mm/in B mm/in C mm/in D mm/in CV Weights lb/ kg
4 155 6.10 22 0.87 119 4.69 100 3.94 185 4 7.41 31.37
200
KPAG PSIG 200 1379
100
689
PSIG
*
*
• optional: also available with solder ends (CXC)
m
N A M E / M AT E R I A L Lever / Cast Aluminum ASTM B85-A03840. Cap / Brass ASTM B283-C37700. Cap Gasket / Saltal K (asbestos free). Screw / UNI 5739 Gal. Steel ASTM A563 Gland Nut / <3" Brass ASTM B124-C37700† GlandStem / <2.5" Brass ASTM B124-C37700 Gland / AF/15/MA (asbestos free). Stem / Brass ASTM B283-C37700. Disks / <1" Brass ASTM B124-C37700†† Body / Bronze ASTM B62-C83600. † 4" Forged Brass ASTM B283-C37700. 2.5" & over: Forged Brass ASTM B283-C37700. †† 1" & over: Forged Brass ASTM B283-C37700.
0 -20
0
50
100
150
200
250
300
366
392
0 (°F)
-29
-18
10
38
66
93
121
149
185
200
(°C)
I 10 3 /8 80 3.15 40 1.57 15 0.59 44 1.73 5.5 0.82 0.37
S
M 15 1 /2 80 3.15 40 1.57 15 0.59 48 1.89 10.6 0.82 0.37
E
E 20 3 /4 100 3.94 48 1.89 20 0.79 51 2.01 17 1.50 0.68
A
N 25 1 100 3.94 55 2.17 25 0.98 57 2.24 28 1.70 0.77
S
I
32 11/4 120 4.72 62 2.44 37 1.46 61 2.40 69 2.20 1.00
40 11/2 136 5.35 68 2.68 40 1.57 67 2.64 118 3.13 1.42
R
A
T
O
N
50 2 165 6.50 81 3.19 47 1.85 77 3.03 185 4.19 1.90
65 21/2 205 8.07 108 4.25 58 2.28 93 3.66 330 7.50 3.40
T
I
S
100 4 255 10.04 148 5.83 82 3.23 115 4.53 770 16.84 7.64
N
G
KPAG 1379 689
100 0
m
80 3 205 8.07 121 4.76 72 2.80 101 3.98 485 9.48 4.30
-20
0
50
100
150
200
250
300
366
392
0 (°F)
-29
-18
10
38
66
93
121
149
185
200
(°C)
MAS MAS CA CA 08/05 0304
A Series Gas Ball Valves
2.1
327
325/SH
Operating temp 32° to 125°F
Operating temp -40° to 125°F
May be used with water 400 W
May be used with water 400 W
Forged construction for greater strength
Forged construction for greater strength
For use with natural, manufactured, mixed, liquified petroleum & LP gas-air mixtures
For use with natural, manufactured, mixed, liquified petroleum & LP gas-air mixtures
Smooth, quarter turn operation
Smooth, quarter turn operation
Seals at high and low pressure ideal for testing installations
Seals at high and low pressure ideal for testing installations
Threaded NPT Fxflare
Threaded NPT FxF
CAN / CGA 9.1-M97, CR91-002
CAN / CGA 9.1-M97, CR91-002
ANSI / ASME Z21.15, US REQ 3-88
ANSI / ASME Z21.15, US REQ 3-88
A
C
N A M E / M AT E R I A L 1. Handle / Aluminum ASTM B85-A03840 2. Screw / Steel ASTM 36 Zinc Plated 3. O-Ring / NBR 70SH 4. O-Ring / Viton 5. Stem / Brass ASTM B124-C37700 6. Seats / PTFE 7. Body-Cap / Brass ASTM B283-C37700 8. Ball / Chromium Plated Brass 9. Body / Brass ASTM B283-C37700
B
D
C
N A M E / M AT E R I A L 1. Handle / Aluminum ASTM B85-A03840 2. Screw / Steel ASTM 36 Zinc Plated 3. O-Ring / NBR 70SH 4. O-Ring / Viton 5. Stem / Brass ASTM B124-C37700 6. Ball / Chromium Plated Brass 7. Body end / Brass ASTM B283-C37700 8. Body / Brass ASTM B283-C37700 9. Seats / PTFE 10. Square Nut / Al. ASTM B85-A03840
D
B
A
• optional: square head nut handle available (model 325SH) D
I
M
mm/in 15 x 16fl. / 1/2 x 5/8 fl. 15 x 20fl. / 1/2 x 3/4fl. 15 x 25fl. / 3/4 x 15/16fl.
m
P
325/SH 327
E A 37.8 / 1.47 37.8 / 1.47 37.8 / 1.47
A
N
S
I
B 32.3 / 1.26 32.3 / 1.26 36.9 / 1.43
C Size pcs/case net/pc (lb) net/carton (lb) pcs/case net/pc (lb) net/carton (lb)
O
N
C 57.7 / 2.27 61.0 / 2.38 70.8 / 2.77
S
m
D 7.14 / 0.28 10.3 / 0.41 12.7 / 0.50
K
I /2" 120 0.3 36 – – – 1
D
I
M
mm/in 15 / 1/2 15 / 1/2 SH 20 / 3/4 20 / 3/4 SH 25 / 1 25 / 1 SH
N
G /4" 120 0.5 60 – – – 3
MAS MASCA CA16/08/05 08/05
E
A 52.0 / 2.03 52.0 / 2.03 58.0 / 2.26 58.0 / 2.26 73.3 / 2.86 73.3 / 2.86
m
D 1
/2 x 1/2 – – – 120 0.4 48
N
S
B 10.0 / 0.39 10.0 / 0.39 15.0 / 0.59 15.0 / 0.59 20.0 / 0.78 20.0 / 0.78
A
I
O
T 1
/2 x 3/8 – – – 120 0.3 36
N
S
C 37.8 / 1.47 37.8 / 1.47 37.8 / 1.47 -
m
D 32.3 / 1.26 36.3 / 1.42 36.9 / 1.44 40.9 / 1.61 39.7 / 1.55 43.7 / 1.70
A 3
/4 x 5/8 – – – 120 0.5 60
m
A Series Gas Ball Valves
326
315/SH
Operating temp 32° to 125°F
Operating temp -40° to 125°F
May be used with water 400 W
May be used with water 400 W
Forged construction for greater strength
Forged unibody for greater strength
For use with natural, manufactured, mixed, liquified petroleum & LP gas-air mixtures
For use with natural, manufactured, mixed, liquified petroleum & LP gas-air mixtures
Smooth, quarter turn operation
Smooth, quarter turn operation
Seals at high and low pressure ideal for testing installations
Seals at high and low pressure ideal for testing installations
Flare x flare
Threaded NPT FxF
CAN / CGA 9.1-M97, CR91-002
CAN / CGA 9.1-M97, CR91-002
ANSI / ASME Z21.15, US REQ 3-88
ANSI / ASME Z21.15, US REQ 3-88
2.2
B E
N A M E / M AT E R I A L 1. Handle / Aluminum ASTM B85-A03840 2. Screw / Steel ASTM 36 Zinc Plated 3. O-Ring / NBR 70SH 4. O-Ring / Viton 5. Stem / Brass ASTM B124-C37700 6. Seats / PTFE 7. Body / Brass ASTM B283-C37700 8. Ball / Chromium Plated Brass 9. Body-Cap / Brass ASTM B283-C37700
F
D C
B
B
A
N A M E / M AT E R I A L 1. Handle / Aluminum ASTM B85-A03840 2. Screw / Steel ASTM 36 Zinc Plated 3. O-Ring / NBR 70SH 4. O-Ring / Viton 5. Stem / Brass ASTM B124-C37700 6. Ball / Chromium Plated Brass 7. Seeger / Steel DIN17222 8. Seat Washer / Brass ASTM B124-C37700 9. O-Ring / NBR 70SH 10. Body / Brass ASTM B283-C37700 11. Square Nut / Al. ASTM B85-A03840
C
D
A
• optional: square head nut handle available (model 315SH)
m
D size (in.) A mm/in B mm/in C mm/in D size E mm/in F mm/in Weight lb/kg
I
M
E
N
S
/8 59.9 2.34 15.7 0.61 7.14 0.28 /8 x 18UNF
5
37.8 1.47 32.3 1.26 0.3 0.40
I
O
N
/2 66.5 2.59 19.0 0.74 10.3 0.40
3
/4 x 16UNF
3
37.8 1.47 32.3 1.26 0.3 0.40
S
m
m
/8 79.4 3.10 22.4 0.87 12.7 0.49
1
D size (in.) A mm/in B mm/in C mm/in D mm/in Weight lb/kg
5
/8 x 14UNF
7
37.8 1.47 36.8 1.44 0.5 0.62
MAS MASCA CA11/08/05 08/05
I
M /2 54.0 2.13 38.0 1.48 32.0 1.24 10.0 0.39 0.4 0.50 1
E
N /4 57.5 2.24 37.8 1.47 34.5 1.35 14.0 0.55 0.5 0.62 3
S
I
O /2 SH 54.0 2.13 36.0 1.40 10.0 0.39 0.4 0.50
1
N
S /4 SH 57.5 2.24 38.5 1.50 14.0 0.55 0.5 0.62
3
m
C Series Carbon Steel Ball Valves
CSSDR-1
• Lockout hole diameter is 7mm
Reduced port
NPT ends to ANSI B1.20.1 One piece body Blowout-proof stem 2000 p.s.i., WOG 1/4" to 2" Valves comply to NACE MR-01-75
3.1 A
D N A M E / M AT E R I A L 1. Handle Grip / Vinyl 2. Handle / Carbon Steel Plated 3. Handle Nut / Carbon Steel Plated 4. Packing Bushing / Stainless Steel 304 ASTM A276 5. Packing / PTFE 6. Stem / Stainless Steel 316 ASTM A276 7. Thrust Washer / Reinforced Teflon 15% GFT 8. Seat / Reinforced Teflon 15% GFT 9. Seat Retainer / Carbon Steel A108 GR 1020 10. Gasket / PTFE 11. Ball / Stainless Steel 316 ASTM A276 (A351-CF8M 1/2" to 2") 12. Body / Carbon Steel A108 GR.1020 13. Stem Washer / Stainless Steel 304 A276 14. Belleville Washer / Stainless Steel 301 15. Spring Washer / Stainless Steel 304 A276
E
B C
1/4" & 3/8" only • Markings are to MSS-SP-25 • Oval handles optionally available • 22 HRC max. material hardness to comply with NACE STD MR0175 • A108 GR.1020 meets physical characteristics of A105 • Material test results & inspection certificates available upon request • CRN numbers available upon request
m
D
size mm/in A mm/in B mm/in C mm/in D mm/in E mm/in CV weights kg/lb
I 8 1 /4 66.30 2.61 23.90 0.94 43.10 1.70 29.1 1.15 4.60 0.18 1.5 0.078 0.172
M
E
10 3 /8 80.00 3.15 26.05 1.03 47.35 1.86 33.35 1.31 6.80 0.27 3.5 0.120 0.264
15 1 /2 109.47 4.31 32.95 1.30 61.72 2.43 54.41 2.14 9.20 0.36 5.7 0.315 0.693
N
S 20 3 /4 109.47 4.31 37.25 1.47 69.85 2.75 59.15 2.33 12.50 0.49 10 0.460 1.012
I 25 1 122.00 4.80 44.50 1.75 85.73 3.38 62.15 2.45 16.00 0.63 16 0.690 1.518
O
N
32 11/4 147.50 5.81 48.60 1.91 93.67 3.69 68.00 2.68 20.00 0.79 25 1.360 2.992
40 11/2 147.50 5.81 52.55 2.07 101.60 4.00 69.00 2.72 24.70 0.97 40 1.590 3.498
S
m 50 2 154.00 6.06 57.70 2.27 114.30 4.50 81.90 3.22 32.00 1.26 62 2.700 5.940
P R E S S U R E
PSIG
T E M P E R AT U R E
R AT I N G
KPAG
1/4" - 2" 100°F (38°C)
2000
13789
1500
10342
1000
6894
800
5515
600
4136
400
2757
300
2068
200
1378
150
1034
100
689
50
344
0
-20
0
50
100
150
200
250
300
350
400
450
500
(°F)
-29
-18
10
38
66
93
121
149
177
214
232
260
(°C)
MAS CA 08/05 MAS MASCA CA 16/08/05 0304
0
C Series Carbon Steel Ball Valves
CSCR-2 Large port NPT ends to ANSI B1.20.1
H
Two piece body Blowout-proof stem
2000 WOG A-216 WCB NACE MR-0175 0097
CSCR-2 3/4"
Adjustable packing gland Actuator mounting pad
3.2
2000 p.s.i., WOG 1/4" to 2" Valves comply to NACE MR-01-75
B
*LCC body optional (LSS/R-2) -50°F/-46°C
D
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14.
A
C (1/4" to 1")
(11/4" to 2")
J
G
I
F
m
D
size mm/in A mm/in B mm/in C mm/in D mm/in E mm/in F mm/in ISO Flange G mm/in H mm/in I mm/in J mm/in CV weights kg/lb
I 8 1 /4 11.0 0.433 103.5 4.075 58.5 2.303 54.0 2.130 M6 M6 12.7 0.5 28.45 1.12 24.5 0.965 5.50 0.217 7.70 0.303 8 0.347 0.763
J
I
E
E
M 10 3 /8 12.5 0.492 103.5 4.075 58.5 2.303 54.0 2.130 M6 M6 12.7 0.5 28.45 1.12 24.5 0.965 5.50 0.217 7.70 0.303 10 0.331 0.728
E 15 1 /2 12.5 0.492 103.5 4.075 61.5 2.421 57.0 2.240 M6 M6 12.7 0.5 28.45 1.12 24.5 0.965 5.50 0.217 7.70 0.303 15 0.314 0.691
N
S 20 3 /4 17.5 0.689 125.0 4.921 79.5 3.130 65.5 2.580 M6 M6 22.1 0.87 34.8 1.37 33.0 1.299 6.50 0.256 9.30 0.367 30 0.602 1.324
I 25 1 20.6 0.866 125.0 4.921 88.5 3.484 69.5 2.740 M6 M6 22.1 0.87 34.8 1.37 33.0 1.299 6.50 0.256 9.30 0.367 40 0.781 1.718
ØF
O 32 11/4 25.0 0.964 193.0 7.598 102 4.016 88.5 3.484 M8 M8 50.0 1.968 F05
29.50 1.161 8.00 0.315 12.50 0.462 48 1.477 3.249
N 40 11/2 31.8 1.252 193.0 7.598 111 4.370 94.5 3.720 M8 M8 50.0 1.968 F05
29.50 1.161 8.00 0.315 12.50 0.492 80 1.987 4.371
S
m 50 2 38.0 1.496 193.0 7.598 137 5.394 107.0 4.213 M8 M8 50.0 1.968 F05
29.50 1.161 10.00 0.394 15.60 0.614 108 2.633 5.793
N A M E / M AT E R I A L Handle Grip / Vinyl Handle / Stainless Steel 304-A276 Locking Device / Stainless Steel 304-A276 Handle Nut / Stainless Steel 304-A276 Stem Washer / Stainless Steel 304-A276 Gland Nut / Carbon Steel A108 Packing / PTFE Stem / Stainless Steel 316-A276 Thrust Washer / Reinforced Teflon 15% GFT Gasket / PTFE Ball / Stainless Steel 316-A351 Body / Cast Steel A216 WCB *(A352 LCC) Seat / Reinforced Teflon 15% GFT Cap / Cast Steel A216 WCB *(A352 LCC)
• Markings are to MSS-SP-25 • 22 HRC max. material hardness to comply with NACE STD MR0175 • All mounting pads are not tapped, but have reserve holes cast in (except 3/4" and 1" which are dimpled). Recommended tapping sizes are listed for reference only. • Material test results & inspection certificates available upon request • CRN numbers available upon request
P R E S S U R E
PSIG
T E M P E R AT U R E
R AT I N G
KPAG
1/4" - 2" 100°F (38°C)
2000
13789
1500
10342
1000
6894
800
5515
600
4136
400
2757
300
2068
200
1378
150
1034
100
689
50
344
0
-20
0
50
100
150
200
250
300
350
400
450
500
(°F)
-29
-18
10
38
66
93
121
149
177
214
232
260
(°C)
MAS MASCA CA03/08/05 08/05
0
C Series Carbon Steel Ball Valves BALL SEAT
MAX. TEMP 214°C 400°F
R-PTFE
SEATS RATING(1) 20682 KPA 3000PSIG (2)
CSS-F-2
MARKING / NAME PLATE
(1) AT -29°C (-20°F) TO 38°C (100°F) (2) 3000 PSIG FOR 1/4" – 2" 2000 PSIG FOR 2-1/2" – 4"
FIG CSS-F-2 WOG 2000 STEM 316 SIZE 4 BALL 316 BODY WCB SEAT RPTFE
FIG CSS-F-2 WOG 3000 STEM 316 SIZE 1 BALL 316 BODY WCB SEAT RPTFE NACE
NACE
TAIWAN
Full port Screwed ends NPT to ANSI B1.20.1 Two piece body Blowout-proof stem Anti-static device Locking device Actuator mounting pad 3000 PSI, WOG 1/4" to 2" @100°F 2000 PSI, WOG 21/2" to 4"" @100°F Valves comply to NACE MR-01-75
0704 L
TAIWAN
SIZE 2-1/2" - 4"
SIZE 1/4" - 2"
E
3.3 H
D
A
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14.
B C
Spot Weld
anti-static design
(1/4" & 3/8")
(1/2" to 4")
I
G
I
m
J
J
Tapping: Note #1
F
• Markings to MSS-SP25. • mounting pads on 2" are tapped. All others have reserve holes. Recommended tapping sizes listed for reference only (1/4" & 3/8" not provided with mounting pads). • Material test results & inspection certificates available upon request. • CRN numbers available upon request.
P R E S S U R E
PSIG 2500 2000
T E M P E R AT U R E
R AT I N G
KPAG
1/4" - 2" 100°F (38°C)
3000
20682 17225
21/2" - 4" 100°F (38°C)
13789
1000
6894
800
5515
600
4136
400
2757
200
1378
150
1034
100
689
50
344
0
N A M E / M AT E R I A L Handle / A536 Grade 65-45-12 Ductile Iron Retainer Spring / Carbon Steel Lockable Stop Plate / Carbon Steel Plated Stem Bearing / Nylon Packing / Viton O-Rings (2) Thrust Washer / Reinforced Teflon 15% GFT Stem / A276 Stainless Steel 316 Gasket / Viton O-Ring (1) Cap / Cast Steel A216 WCB Seat / Reinforced Teflon 15% GFT Ball / A351 Stainless Steel 316 Body / Cast Steel A216 WCB Spring & Pin / A276 Stainless Steel 304 Screw / A307 Carbon Steel
-20
0
50
100
150
200
250
300
350
400
450
500
(°F)
-29
-18
10
38
66
93
121
149
177
214
232
260
(°C)
0
D
size 8 mm/in 1/4 A 9.50 mm/in 0.374 B 30.30 mm/in 1.193 C 62.00 mm/in 2.441 D 43.10 mm/in 1.697 E 127.00 mm/in 5.000 F mm/in G mm/in H mm/in I 5.90 mm/in 0.232 J 9.70 mm/in 0.382 Note #1 CV 11 Weights 0.354 kg / lb 0.779
MAS MASCA CA11/08/05 08/05
I
M
E
10 15 20 3 1 3 /8 /2 /4 9.50 12.70 20.00 0.374 0.500 0.787 30.30 35.00 45.00 1.193 1.378 1.772 62.00 69.00 85.00 2.441 2.717 3.346 43.10 45.90 62.25 1.697 1.807 2.451 127.00 127.00 158.80 5.000 5.000 6.250 25.40 44.20 1.000 1.740 35.00 41.00 1.378 1.614 20.70 26.10 0.815 1.028 5.90 5.90 8.00 0.232 0.232 0.315 9.70 9.70 11.70 0.382 0.382 0.461 M6 M6 11 15 45 0.346 0.530 0.940 0.761 1.166 2.068
N 25 1 24.00 0.945 48.00 1.890 93.00 3.661 65.35 2.573 158.80 6.250 44.20 1.740 44.00 1.732 24.70 0.972 8.00 0.315 11.70 0.461 M6 65 1.350 2.970
S 32 11/4 31.80 1.252 54.10 2.130 105.0 4.134 86.10 3.390 215.90 8.500 47.20 1.858 54.00 2.126 34.50 1.358 12.00 0.472 16.90 0.665 M8 125 2.390 5.258
I 40 11/2 38.10 1.500 58.00 2.283 116.0 4.567 92.00 3.622 215.90 8.500 47.20 1.858 60.00 2.362 34.80 1.370 12.00 0.472 16.90 0.665 M8 175 2.980 6.556
O 50 2 50.80 2.000 67.45 2.655 134.0 5.276 102.80 4.047 215.90 8.500 47.20 1.858 74.00 2.913 33.80 1.331 12.00 0.472 16.90 0.665 M8 380 4.520 9.944
N 65 21/2 65.00 2.559 81.90 3.224 164.0 6.457 125.75 4.951 381.00 15.000 70.00 2.750 81.00 3.189 39.70 1.563 14.00 0.551 20.90 0.823 M8 500 8.960 19.712
S
m
80 3 78.00 3.071 89.95 3.541 180.0 7.086 135.75 5.344 381.00 15.000 70.00 2.750 92.00 3.622 39.20 1.543 14.00 0.551 20.90 0.823 M8 900 12.650 27.830
100 4 100 3.937 105.5 4.154 211.0 8.307 141.0 5.551 460 18.11 88.40 3.480 125.0 4.921 57.00 2.244 17.00 0.669 28.90 1.138 M8 1250 21.310 46.882
C Series Carbon Steel Ball Valves
CSS-F-3N Full port NPT threads to ANSI B1.20.1 Three piece body Blowout-proof stem Adjustable packing nut Locking lever handle ISO 5211 mounting pad Floating ball Complies to NACE MR-01-75 2000 PSI, WOG 1/4" to 1" @100°F 1500 PSI, WOG 11/4" to 3" @100°F
/4" to 11/4"
1
D
3" 1000WOG 0696
1 /2" to 3" 1
H
B
N A M E / M AT E R I A L 1. Handle Grip/ Vinyl 2. Handle / Stainless Steel 304 - A276 3. Locking Device / Stainless Steel 304 - A276 4. Handle Nut /Stainless Steel 304 - A 276 5. Stem Washer / Stainless Steel 304 - A276 6. Gland Nut / Carbon Steel A108 7. Packing / PTFE 8. Stem / Stainless Steel 316 - A276m 9. Thrust Washer / Reinforced Teflon 15% GFT 10. Gasket / PTFE 11. Hex Nut / Carbon Steel A194 Grade 2HM 12. Bolt / Carbon Steel A193 Grade B7M 13. Ball / Stainless Steel 316 - A351m 14. Body / Cast Steel A216 - WCB 15. Seat / Reinforced Teflon 15% GFT 16. Cap / Cast Steel A216 - WCB
A
C J
I
ØE
F
• Markings to MSS-SP25. • Material test results & inspection certificates available upon request. • CRN numbers available upon request.
P R E S S U R E
PSIG 2000 1500
T E M P E R AT U R E
R AT I N G
KPAG
1/4" - 1" 100°F (38°C)
13789
11/4" - 3" 100°F (38°C)
10342
1000
6894
800
5515
600
4136
400
2757
300
2068
200
1378
150
1034
100
689
50
344
0
3.4
-20
0
50
100
150
200
250
300
350
400
450
500
(°F)
-29
-18
10
38
66
93
121
149
177
214
232
260
(°C)
0
m
D
N
S
size mm/in A mm/in B mm/in C mm/in D mm/in E mm/in F ISO Flg H mm/in I mm/in J mm/in CV Weights kg / lb
8 10 15 20 25 32 40 50 1 3 1 3 /4 /8 /2 /4 1 11/4 11/2 2 9.50 9.50 15.00 20.00 25.00 32.00 38.00 50.50 0.374 0.374 0.591 0.787 0.984 1.260 1.496 1.988 67.00 67.00 68.50 75.00 79.00 88.50 94.50 107.00 2.638 2.638 2.697 2.953 3.110 3.484 3.720 4.213 60.00 60.00 70.00 76.00 92.00 105.0 120.0 138.0 2.362 2.362 2.756 2.922 3.622 4.134 4.724 5.433 120.00 120.00 120.00 139.00 139.00 193.00 193.00 193.00 4.724 4.724 4.724 5.472 5.472 7.598 7.598 7.598 36.00 36.00 36.00 42.00 42.00 50.00 70.00 70.00 1.417 1.417 1.417 1.653 1.653 1.968 2.756 2.756 M6 M6 M6 M6 M6 M8 M8 M8 F03 F03 F03 F04 F04 F05 F07 F07 11.30 11.30 15.30 19.50 19.50 23.80 22.50 29.00 0.445 0.445 0.602 0.768 0.768 0.937 0.886 1.142 5.50 5.50 5.50 6.50 6.50 8.00 8.00 10.00 0.217 0.217 0.217 0.256 0.256 0.315 0.315 0.394 7.70 7.70 7.70 9.30 9.30 12.50 12.50 15.60 0.303 0.303 0.303 0.367 0.367 0.492 0.492 0.614 10 10 26 50 68 120 170 360 0.434 0.420 0.620 0.910 1.190 1.930 2.780 4.750 0.955 0.924 1.364 2.002 2.618 4.246 6.116 10.450
65 21/2 65.00 2.559 129.50 5.098 170.5 6.713 244.00 9.606 102.00 4.016 M8 F10 33.00 1.299 12.00 0.472 18.80 0.740 510 8.630 18.986
MAS 04/08/05 MASCA CA 08/05
I
M
E
N
S
I
O
m 80 3 78.00 3.071 139.50 5.492 191.0 7.520 244.00 9.606 102.00 4.016 M8 F10 33.00 1.299 12.00 0.472 18.80 0.740 900 13.460 29.612
C Series Carbon Steel Ball Valves
CSS-F-3N-SW
J
Full port Socket Weld ends to ANSI B16.11 Three Piece body Blowout-proof stem Adjustable packing nut Locking lever handle ISO 5211 mounting pad Complies to NACE MR-01-75 Floating ball 2000 PSI, WOG 1/4" to 1" @100°F 1500 PSI, WOG 11/4" to 3" @100°F
I
/4" to 11/4"
1
ØE
F
3.5 3" 1000WOG 0696
D
11/2" to 3"
H
N A M E / M AT E R I A L 1. Handle Grip/ Vinyl 2. Handle / Stainless Steel 304 - A276 3. Locking Device / Stainless Steel 304 - A276 4. Handle Nut /Stainless Steel 304 - A 276 5. Stem Washer / Stainless Steel 304 - A276 6. Gland Nut / Carbon Steel A108 7. Packing / PTFE 8. Stem / Stainless Steel 316 - A276m 9. Thrust Washer / Reinforced Teflon 15% GFT 10. Gasket / PTFE 11. Hex Nut / Carbon Steel A194 Grade 2HM 12. Bolt / Carbon Steel A193 Grade B7M 13. Ball / Stainless Steel 316 - A351m 14. Body / Cast Steel A216 - WCB 15. Seat / Reinforced Teflon 15% GFT 16. Cap / Cast Steel A216 - WCB
B
G A
C Butt-Weld ends are available on request
m
D
N
S
size mm/in A mm/in B mm/in C mm/in D mm/in E mm/in F ISO Flg G mm/in H mm/in I mm/in J mm/in Weights kg / lb CV
8 10 15 20 25 32 40 50 3 1 3 /4 /8 /2 /4 1 11/4 11/2 2 9.50 9.50 15.00 20.00 25.00 32.00 38.00 50.50 0.374 0.374 0.591 0.787 0.984 1.260 1.496 1.988 67.00 67.00 68.50 75.00 79.00 88.50 94.50 107.00 2.638 2.638 2.697 2.953 3.110 3.484 3.720 4.213 60.00 60.00 70.00 76.00 92.00 105.0 120.0 138.0 2.362 2.362 2.756 2.922 3.622 4.134 4.724 5.433 120.00 120.00 120.00 139.00 139.00 193.00 193.00 193.00 4.724 4.724 4.724 5.472 5.472 7.598 7.598 7.598 36.00 36.00 36.00 42.00 42.00 50.00 70.00 70.00 1.417 1.417 1.417 1.653 1.653 1.968 2.756 2.756 M6 M6 M6 M6 M6 M8 M8 M8 F03 F03 F03 F04 F04 F05 F07 F07 14.20 17.60 21.70 27.10 33.80 42.60 48.70 61.00 0.559 0.693 0.854 1.067 1.330 1.677 1.917 2.402 11.30 11.30 15.30 19.50 19.50 23.80 22.50 29.00 0.445 0.445 0.602 0.768 0.768 0.937 0.886 1.142 5.50 5.50 5.50 6.50 6.50 8.00 8.00 10.00 0.217 0.217 0.217 0.256 0.256 0.315 0.315 0.394 7.70 7.70 7.70 9.30 9.30 12.50 12.50 15.60 0.303 0.303 0.303 0.367 0.3.67 0.492 0.492 0.614 0.415 0.400 0.600 0.880 1.150 1.870 2.670 4.620 0.913 0.880 1.320 1.936 2.530 4.114 5.874 10.164 10 10 26 50 68 120 170 360
I
65 21/2 65.00 2.559 129.50 5.098 170.5 6.713 244.00 9.606 102.00 4.016 M8 F10 73.80 2.906 33.00 1.299 12.00 0.472 18.80 0.740 8.250 18.150 510
1
M
E
N
S
I
O
m 80 3 78.00 3.071 139.50 5.492 191.0 7.520 244.00 9.606 102.00 4.016 M8 F10 90.00 3.543 33.00 1.299 12.00 0.472 18.80 0.740 13.000 28.600 900
• Markings to MSS-SP25. • Material test results & inspection certificates available upon request. • CRN numbers available upon request.
P R E S S U R E
PSIG
T E M P E R AT U R E
R AT I N G
KPAG
1/4" - 1" 100°F (38°C)
2000
13789
11/4" - 3" 100°F (38°C)
1500
10342
1000
6894
800
5515
600
4136
400
2757
300
2068
200
1378
150
1034
100
689
50
344
0
-20
0
50
100
150
200
250
300
350
400
450
500
(°F)
-29
-18
10
38
66
93
121
149
177
214
232
260
(°C)
MAS MASCA CA04/08/05 08/05
0
C Series Carbon Steel Ball Valves
CSS-F-3-HD-FS
Fire-safe to API-607 4th edition CSS-F-3-HD-FS WOG 3000 SIZE 1 BODY WCB
CSS-F-3-HD-FS
STEM 316 BALL 316 SEAT R-PTFE
NACE
WOG 1000 SIZE 3 BODY WCB
TAIWAN
NACE
SIZE 1/2" - 2"
STEM 316 BALL 316 SEAT R-PTFE TAIWAN
SIZE 2-1/2" - 3"
D
H
A
C J
I
F
m
• Markings to MSS-SP25. • Material test results & inspection certificates available upon request. • CRN numbers available upon request.
P R E S S U R E
PSIG
T E M P E R AT U R E
R AT I N G
KPAG
1/2" - 2" 100F (38°C)
3000 1500
20684 10342
21/2" - 3" 100F (38°C)
1000
6894
800
5515
600
4136
400
2757
300
2068
200
1378
150
1034
100
689
50
344
0
3.6
N A M E / M AT E R I A L 1. Handle Grip/ Vinyl 2. Handle / Stainless Steel 304 - A 276 3. Locking Device / Stainless Steel 304 - A 276 4. Stem Washer / Stainless Steel 304 - A 276 5. Handle Nuts / Stainless Steel 304 - A 276 6. Lock Washer / Stainless Steel 304 - A 276 7. Belleville Washer / Stainless Steel 301 8. Gland / Stainless Steel 316 - A 276 9. Packing / Graphite 10. Stem / Stainless Steel 316 - A 276m 11. Thrust Washer / R-PTFE (TFM4215) 12. Gasket / Graphite + Stainless Steel 316 13. Hex Nut / Carbon Steel A 194 grade 2HM 14. Stud Bolt / Carbon Steel A 193 grade B7M 15. Ball / 316 - A 351 - CF8Mm 16. Body / Carbon Steel A 216 - WCB 17. Seat / R-PTFE (TFM4215) 18. Cap / Carbon Steel A 216 - WCB 19. Spring & Pin / Stainless Steel 316- A 276
B
ØE
Full port NPT threads to ANSI B1.20.1 Encapsulated bolt design 3 piece body with blowout-proof stem Adjustable packing nut Complies to NACE MR-01-75 Anti-static design Floating ball Locking lever handle ISO 5211 mounting pad 3000 PSI, WOG 1/2" to 2" 1000 PSI, WOG 21/2" to 3"
-20
0
50
100
150
200
250
300
350
400
450
500
(F)
-29
-18
10
38
66
93
121
149
177
214
232
260
(C)
0
size mm/in A mm/in B mm/in C mm/in D mm/in E mm/in F ISO Flg H mm/in I mm/in J mm/in CV Weights kg / lb
MASCA CA11/08/05 08/05 MAS
D 15 1 /2 15.00 0.591 68.50 2.697 68.5 2.697 120.00 4.724 36.00 1.417 M6 F03 15.50 0.610 5.50 0.217 7.70 0.303 26 0.700 1.540
I
M 20 3 /4 20.00 0.787 75.00 2.953 80.5 3.169 139.00 5.472 42.00 1.653 M6 F04 18.50 0.728 6.50 0.256 9.30 0.367 50 1.200 2.640
E 25 1 25.00 0.984 79.00 3.110 91.5 3.602 139.00 5.472 42.00 1.653 M6 F04 18.50 0.728 6.50 0.256 9.30 0.367 68 1.660 3.652
N 32 11/4 32.00 1.260 88.50 3.484 100.5 3.957 193.00 7.598 50.00 1.968 M8 F05 23.50 0.925 8.00 0.315 12.50 0.492 120 2.470 5.434
S
I 40 11/2 38.00 1.496 94.50 3.720 117.0 4.606 193.00 7.598 70.00 2.756 M8 F07 23.50 0.925 8.00 0.315 12.50 0.492 170 3.870 8.514
O 50 2 50.50 1.988 107.00 4.213 133.5 5.256 193.00 7.598 70.00 2.756 M8 F07 27.00 1.063 10.00 0.394 15.60 0.614 360 6.800 14.960
N 65 21/2 65.00 2.559 129.50 5.098 157.8 6.213 244.00 9.606 102.00 4.016 M8 F10 30.00 1.181 12.00 0.472 18.80 0.740 510 10.250 22.550
S
m 80 3 78.00 3.071 139.50 5.492 178.0 7.008 244.00 9.606 102.00 4.016 M8 F10 30.00 1.181 12.00 0.472 18.80 0.740 900 15.580 34.276
G Series Investment Cast Stainless Steel Ball Valves
G1 Reduced port NPT ends to ANSI B1.20.1 One piece body Blowout-proof stem Locking lever handle (Ring lock with 1/4" to 3/8", Latch lock with 1/2" to 2")
4.1
1000 PSI, WOG 1/4" to 2"
E
D
N A M E / M AT E R I A L 1. Handle Grip / Vinyl 2. Handle / Stainless Steel 304-A276 3. Locking Device / Stainless Steel 304-A276 4. Handle Nut / Stainless Steel 304-A276 5. Stem Washer / Stainless Steel 304-A276 6. Belleville Washer / Stainless Steel 301 7. Packing / PTFE 8. Spring Washer / Stainless Steel 304-A276 9. Thrust Washer / Reinforced Teflon 15% GFT 10. Stem / Stainless Steel 316-A276 11. Seat Retainer / Stainless Steel 316-A276 12. Seat / Reinforced Teflon 15% GFT 13. Gasket / PTFE 14. Ball / Stainless Steel 316-A276 (A351-CF8M 1/2" to 2") 15. Body / Stainless Steel 316-CF8M
B A
C
• Markings to MSS-SP25 • Available with Oval handle • Material test results & inspection certificates available upon request • CRN numbers available upon request m
D
size mm/in A mm/in B mm/in C mm/in D mm/in E mm/in CV weights kg/lb
I 8 1 /4 4.60 0.181 17.00 0.669 40.50 1.594 34.00 1.336 77.00 3.031 1.5 0.072 0.158
M 10 3 /8 6.80 0.268 21.50 0.846 48.00 1.890 35.50 1.398 85.00 3.346 3.5 0.112 0.246
E 15 1 /2 9.20 0.362 26.00 1.024 57.00 2.244 43.00 1.693 98.00 3.858 5.7 0.208 0.458
N
S 20 3 /4 12.50 0.492 32.00 1.260 59.00 2.323 48.50 1.909 98.00 3.858 10.0 0.271 0.596
I 25 1 16.00 0.630 38.00 1.496 70.54 2.777 60.00 2.362 107.00 4.212 16.0 0.428 0.942
O
N
32 11/4 20.00 0.787 49.00 1.929 77.50 3.051 61.50 2.421 107.00 4.212 25.0 0.705 1.551
40 11/2 24.50 0.965 52.50 2.067 82.50 3.248 70.50 2.776 135.00 5.315 40.0 0.826 1.817
S
m 50 2 32.00 1.260 66.00 2.598 99.30 3.909 83.00 3.268 143.00 5.630 62.0 1.380 3.036
P R E S S U R E
PSIG
T E M P E R AT U R E
R AT I N G
KPAG
2000
13789
1500
1/4"
1000
10342
- 2" 100°F (38°C)
6894
800
5515
600
4136
400
2757
300
2068
200
1378
150
1034
100
689
50
344
0
-20
0
50
100
150
200
250
300
350
400
450
500
(°F)
-29
-18
10
38
66
93
121
149
177
214
232
260
(°C)
MASCA CA16/08/05 08/05 MAS
0
G Series Investment Cast Stainless Steel Ball Valves
G2E Full port NPT ends to ANSI B1.20.1 Two piece body Blowout-proof stem Adjustable packing nut Locking lever handle Sizes 1/4" to 2"
Sizes 21/2" & 3"
Actuator mounting pad
4.2
Floating ball 1000 PSI, WOG /4" to 3" 1
P-T 450°F @ 100 PSI
D
F
F
N A M E / M AT E R I A L 1. Handle Grip / Vinyl 2. Handle / Stainless Steel 304 - A276 3. Locking Device / Stainless Steel 304 - A276 4. Handle Nut / Stainless Steel 304 - A 276 5. Stem Washer / Stainless Steel 304 - A276 6. Gland Nut / Stainless Steel 304 - A276 7. Packing / Reinforced Teflon 15% GFT 8. Stem / Stainless Steel 316 / A276 9. Thrust Washer / Reinforced Teflon 15% GFT 10. Gasket / Reinforced Teflon 15% GFT 11. Cap / Stainless Steel 316 - A351 - CF8M 12. Seat / Reinforced Teflon 15% GFT 13. Ball / Stainless Steel 316 - A 351 - CF8M 14. Body / Stainless Steel 316 - A 351 - CF8M
B
A
C • Markings to MSS-SP25 • Material test results & inspection certificates available upon request • CRN numbers available upon request • Mounting pads are dimpled at drilling locations
m size mm/in A mm/in B mm/in C mm/in D mm/in F mm/in CV weights kg/lb
D 8 1 /4 9.6 0.378 54.0 2.126 49.4 1.945 98.0 3.858 12.7 0.500 7.0 0.20 0.440
I
M 10 3 /8 9.6 0.378 54.0 2.126 49.4 1.945 98.0 3.858 12.7 0.500 7.0 0.21 0.462
15 1 /2 12.7 0.500 54.6 2.150 56.0 2.205 98.0 3.858 12.7 0.500 15.0 0.235 0.517
E
N 20 3 /4 20.0 0.787 64.8 2.551 66.0 2.598 122.0 4.803 14.9 0.587 45.0 0.43 0.946
S 25 1 24.0 0.945 67.8 2.669 77.7 3.059 122.0 4.803 14.9 0.587 65.0 0.63 1.386
I 32 11/4 31.8 1.252 79.4 3.126 90.4 3.559 152.0 5.984 17.7 0.697 125.0 1.11 2.442
O 40 11/2 38.1 1.50 84.4 3.323 102.4 4.031 152.0 5.984 17.7 0.697 175.0 1.49 3.278
N 50 2 50.0 1.968 100.7 3.965 119.0 4.685 178.0 7.008 23.6 0.929 380.0 2.60 5.720
S 65 21/2 65.0 2.559 135.0 5.315 151.4 5.961 247.0 9.724 72.1 2.839 500.0 5.42 11.924
m 80 3 78.0 3.071 145.00 5.709 171.4 6.748 247.0 9.724 72.1 2.839 900.0 8.38 18.436
P R E S S U R E
PSIG
T E M P E R AT U R E
R AT I N G
KPAG
2000
13789
1500
1/4"
1000
10342
- 3" 100°F (38°C)
6894
800
5515
600
4136
400
2757
300
2068
200
1378
150
1034
100
689
50
344
0
-20
0
50
100
150
200
250
300
350
400
450
500
(°F)
-29
-18
10
38
66
93
121
149
177
214
232
260
(°C)
MAS MASCA CA03/08/05 08/05
0
G Series Investment Cast Stainless Steel Ball Valves
G2 Full port NPT ends to ANSI B1.20.1 Two piece body Blowout-proof stem Adjustable packing gland
J
J
Locking lever handle I
G
4.3
F
Actuator mounting pad
G
I
2000 PSI, WOG 1/4" to 2"
F
E
Sizes 1/4" to 2"
Sizes 21/2" to 3"
1500 PSI, WOG 21/2" to 3"
D
H
N A M E / M AT E R I A L 1. Handle Grip / Vinyl 2. Handle / Stainless Steel 304 - A276 3. Locking Device / Stainless Steel 304 - A276 4. Handle Nut / Stainless Steel 304 - A 276 5. Stem Washer / Stainless Steel 304 - A276 6. Gland Nut / Stainless Steel 304 - A276 7. Packing / PTFE 8. Stem / Stainless Steel 316 / A276 9. Thrust Washer / Reinforced Teflon 15% GFT 10. Gasket / PTFE 11. Cap / Stainless Steel 316 - A 351 CF8M 12. Seat / Reinforced Teflon 15% GFT 13. Ball / Stainless Steel 316 - A 351 CF8M 14. Body / Stainless Steel 316 - A 351 CF8M
B
A
C • Markings to MSS-SP25 • Available with Oval handle for size range: 1/4"-2" • Material test results & inspection certificates available upon request • CRN numbers available upon request • 1/2" to 2" mounting pads are tapped, 1/4" and 3/8" have reserve holes cast in, 21/2" and 3" are dimpled. m size mm/in A mm/in B mm/in C mm/in D mm/in E F mm/in G mm/in H mm/in I mm/in J mm/in CV weights kg/lb
D 8 1 /4 9.60 0.374 54.00 2.130 57.60 2.264 103.50 4.075
I
M
* * 12.73 0.501 25.45 1.002 22.50 0.886 5.50 0.217 7.70 0.303 7.0 0.260 0.572
E
N
S
I
O
N
S
10 15 20 25 32 40 50 65 3 1 3 /8 /2 /4 1 11/4 11/2 2 21/2 9.60 12.70 20.00 25.00 32.00 38.00 50.80 65.00 0.374 0.500 0.787 0.984 1.260 1.496 2.000 2.559 54.00 57.00 65.50 69.50 82.50 88.00 105.00 138.00 2.130 2.240 2.580 2.740 3.250 3.460 4.130 5.430 57.60 62.00 72.50 86.00 94.00 116.00 134.00 164.00 2.264 2.441 2.854 3.386 3.700 4.567 5.276 6.457 103.50 103.50 125.00 125.00 158.00 158.00 181.00 252.00 4.075 4.075 4.921 4.921 6.220 6.220 7.126 9.921 M6 M6 M6 M8 M8 M8 † 12.73 12.73 14.85 14.85 17.68 24.75 24.75 72.10 0.501 0.501 0.585 0.585 0.696 0.974 0.974 2.839 25.45 25.45 29.70 29.70 35.35 49.50 49.50 72.10 1.002 1.002 1.169 1.169 1.392 1.949 1.949 2.839 22.50 23.10 28.00 29.00 38.20 38.20 40.00 47.50 0.886 0.909 1.102 1.142 1.504 1.504 1.575 1.870 5.50 5.50 6.50 6.50 8.00 8.00 10.00 12.00 0.217 0.217 0.256 0.256 0.315 0.315 0.394 0.472 7.70 7.70 9.30 9.30 12.50 12.50 15.60 18.80 0.303 0.303 0.367 0.367 0.492 0.492 0.614 0.740 7.0 15.0 45.0 65.0 125.0 175.0 380.0 500.0 0.250 0.313 0.555 0.795 1.330 2.013 3.550 6.250 0.550 0.689 1.221 1.749 2.926 4.429 7.810 13.750
m 80 3 78.00 3.071 148.00 5.830 180.00 7.086 252.00 9.921 † 72.10 2.839 72.10 2.839 47.50 1.870 12.00 0.472 18.80 0.740 900.0 9.370 20.614
P R E S S U R E
PSIG
1/4"
2000
T E M P E R AT U R E
R AT I N G
KPAG
- 2" 100F (38C)
13789
21/2" - 3" 100F (38C)
1500
10342
1000
6894
800
5515
600
4136
400
2757
300
2068
200
1378
150
1034
100
689
50
344
0
-20
0
50
100
150
200
250
300
350
400
450
500
(F)
-29
-18
10
38
66
93
121
149
177
214
232
260
(C)
Untapped *† dimpled at drilling location MASCA CA03/08/05 08/05 MAS
0
G Series Investment Cast Stainless Steel Ball Valves
E
ØF
G2-ED
ØG
Full port NPT threads to ANSI B1.20.1 Two piece body Blowout-proof stem ISO 5211 Direct Mounting Pad Compatible with Max-Air/MAS Adjustable Live-loaded Packing
4.4
Anti-static Device Floating Ball 1000 PSI, WOG 1/2" to 2"
B N A M E / M AT E R I A L 1. Packing Nut / Stainless Steel 304 - A276m 2. Lock Washer / Stainless Steel 304 - A276m 3. Belleville Washer / Stainless Steel 304 - A276m 4. Packing Gland / Stainless Steel 304 - A 276m 5. Packing / PTFE 6. Stem / Stainless Steel 316 / A276m 7. Stem Seal / VITON O-ringm 8. Thrust Washer / RPTFE (MG1241)m 9. Gasket / PTFEm 10. Cap / Stainless Steel 316 - CF8M 11. Seat / Reinforced Teflon 15% GFT 12. Body / Stainless Steel 316 - CF8M 13. Ball / SS 316 - A 351 - CF8Mm 14. Spring & Pin Anti-static Device / Stainless Steel 304 - A 276m
D
A
C • Markings to MSS-SP25 • Material test results & inspection certificates available upon request. • CRN numbers available upon request
m size mm/in A mm/in B mm/in C mm/in D mm/in E mm/in F mm/in G mm/in CV weights kg/lb
D
I 15 1 /2 15.0 0.590 10.0 0.394 58.2 2.291 36.3 1.429 9.0 0.354 42.0 1.653 36.0 1.417 15.0 0.206 0.458
M
E 20 3 /4 20.0 0.787 10.0 0.394 66.0 2.598 39.5 1.555 9.0 0.354 42.0 1.653 36.0 1.417 45.0 0.396 0.876
N 25 1 24.0 0.945 11.0 0.433 77.7 3.059 50.5 1.988 11.0 0.433 50.0 1.968 42.0 1.653 65.0 0.703 1.547
S
I 32 11/4 31.8 1.252 11.0 0.433 90.4 3.559 56.0 2.205 11.0 0.433 50.0 1.968 42.0 1.653 125.0 1.040 2.288
O
N 40 11/2 38.1 1.500 17.0 0.669 102.4 4.031 70.6 2.779 14.0 0.551 70.0 2.756 50.00 1.968 175.0 1.690 3.718
S 50 2 50.0 1.968 17.0 0.669 119.0 4.685 79.0 3.110 14.0 0.551 70.0 2.756 50.00 1.968 380.0 2.700 5.940
m
P R E S S U R E
PSIG
T E M P E R AT U R E
R AT I N G
KPAG
2000
13789
1500
1/2"
1000
10342
- 2" 100°F (38°C)
6894
800
5515
600
4136
400
2757
300
2068
200
1378
150
1034
100
689
50
344
0
-20
0
50
100
150
200
250
300
350
400
450
500
(°F)
-29
-18
10
38
66
93
121
149
177
214
232
260
(°C)
MASCA CA11/08/05 08/05 MAS
0
G Series Investment Cast Stainless Steel Ball Valves
E
ØF
G3-ED
ØG
Full port NPT Threads to ANSI B1.20.1 Three piece body Blowout-proof stem Adjustable live-loaded packing Anti-static device Floating Ball ISO 5211 direct mounting pad Compatible with Max-Air/MAS 1000 PSI, WOG 1/2" to 2"
4.5 B
N A M E / M AT E R I A L 1. Stem / Stainless Steel 316 - A276 2. Packing Nut / Stainless Steel 304 - A276 3. Lock Washer / Stainless Steel 304 - A276 4. Belleville Washer / Stainless Steel 304 - A276 5. Packing Gland / Stainless Steel 304 - A276 6. Packing / PTFE 7. Stem Seal / VITON O-Ring 8. Thrust Washer / RPTFE (MG1241) 9. Bolt Washer / Stainless Steel 304 - A276 10. Hex Nut / Stainless Steel 304 - A276 11. Bolt / Stainless Steel 304 - A276 12. Ball / Stainless Steel 316 - A 351 - CF8M 13. Body / A351 - CF8M 14. Seat / Reinforced Teflon 15% GFT 15. Gasket / PTFE 16. Cap / A351 - CF8M 17. Spring & Pin Anti-static Device / Stainless Steel 304 - A276
D
G A
C
• Markings to MSS-SP25 • Material test results & inspection certificates available upon request. • CRN numbers available upon request
m size mm/in A mm/in B mm/in C mm/in D mm/in E mm/in F mm/in G mm/in CV weights kg/lb
D
I 15 1 /2 15.0 0.590 10.0 0.394 67.3 2.650 36.3 1.429 9.0 0.354 42.0 1.653 36.0 1.417 26.0 0.530 1.166
M
E 20 3 /4 20.0 0.787 10.0 0.394 72.6 2.858 39.5 1.555 9.0 0.354 42.0 1.653 36.0 1.417 50.0 0.680 1.496
N 25 1 24.0 0.945 11.0 0.433 87.75 3.455 50.5 1.988 11.0 0.433 50.0 1.968 42.0 1.653 68.0 1.030 2.266
S
I 32 11/4 31.8 1.252 11.0 0.433 104.4 4.110 56.0 2.205 11.0 0.433 50.0 1.968 42.0 1.653 120.0 1.720 3.784
O
N 40 11/2 38.1 1.500 17.0 0.669 116.35 4.581 70.6 2.779 14.0 0.551 70.0 2.756 50.00 1.968 170.0 2.490 5.478
S 50 2 50.0 1.968 17.0 0.669 131.9 5.193 79.00 3.110 14.0 0.551 70.0 2.756 50.00 1.968 360.0 3.800 8.360
m
P R E S S U R E
PSIG
T E M P E R AT U R E
R AT I N G
KPAG
2000
13789
1500
1/2"
1000
10342
- 2" 100°F (38°C)
6894
800
5515
600
4136
400
2757
300
2068
200
1378
150
1034
100
689
50
344
0
-20
0
50
100
150
200
250
300
350
400
450
500
(°F)
-29
-18
10
38
66
93
121
149
177
214
232
260
(°C)
MAS MASCA CA11/08/05 08/05
0
G Series Investment Cast Stainless Steel Ball Valves
G3/G3-7
J
Full port NPT ends to ANSI B1.20.1 Three piece body Blowout-proof stem Adjustable packing gland Locking lever handle ISO 5211 mounting pad 2000 PSI, WOG 1/4" to 1" 1500 PSI, WOG 11/4" to 3"
I
/4" to 1"
1
ØE
F
3" 1000WOG 0696
11/4" to 3"
4.6
D • Optional: 317 S/S body/cap model MAS G3-7 • Markings to MSS-SP25 • Material test results & inspection certificates available upon request. • CRN numbers available upon request
N A M E / M AT E R I A L 1. Handle Grip/ Vinyl 2. Handle / Stainless Steel 304 - A276 3. Locking Device / Stainless Steel 304 - A276 4. Handle Nut /Stainless Steel 304 - A276 5. Stem Washer / Stainless Steel 304 - A276 6. Gland Nut / Stainless Steel 304 - A276 7. Packing / PTFE 8. Stem / Stainless Steel 316 - A276 (A351-CG8M-317 for model G3-7) 9. Thrust Washer / Reinforced Teflon 15% GFT 10. Gasket / PTFE 11. Hex Nut / Stainless Steel A194 Grade 8 12. Bolt / Stainless Steel A193 Grade 8 13. Ball / Stainless Steel 316 - A351 - CF8M (A351-CG8M-317 for model G3-7) 14. Body / Stainless Steel 316 - A351 - CF8M (A351-CG8M-317 for model G3-7) 15. Seat / Reinforced Teflon 15% GFT 16. Cap / Stainless Steel 316 - A351 - CF8M (A351-CG8M-317 for model G3-7) 17. Bolt Washer / Stainless Steel 304 - A276
H B
G3-LL: Live Loaded Design Optional Packing & Thrust Washer Seals special factory order only
A
PEEK
C
Body 50% SS Filled PTFE PEEK 50% SS Filled PTFE RPTFE (MG1241) 50% SS Filled PTFE PEEK
Stem
m size mm/in A mm/in B mm/in C mm/in D mm/in E mm/in F ISO Flg H mm/in I mm/in J mm/in CV weights kg/lb
D 8 1 /4 9.50 0.374 67.00 2.638 60.00 2.362 120.00 4.724 36.00 1.417 M6 F03 11.30 0.445 5.50 0.217 7.70 0.303 10.0 0.434 0.955
I
N
S
10 15 20 25 32 40 50 3 1 3 /8 /2 /4 1 11/4 11/2 2 9.50 15.00 20.00 25.00 32.00 38.00 50.50 0.374 0.591 0.787 0.984 1.260 1.496 1.988 67.00 68.50 75.00 79.00 88.50 94.50 107.00 2.638 2.697 2.953 3.110 3.484 3.720 4.213 60.00 70.00 76.00 92.00 105.00 120.00 138.00 2.362 2.756 2.992 3.622 4.134 4.724 5.433 120.00 120.00 139.00 139.00 193.00 193.00 193.00 4.724 4.724 5.472 5.472 7.598 7.598 7.598 36.00 36.00 42.00 42.00 50.00 70.00 70.00 1.417 1.417 1.653 1.653 1.968 2.756 2.756 M6 M6 M6 M6 M8 M8 M8 F03 F03 F04 F04 F05 F07 F07 11.30 15.30 19.50 19.50 23.80 22.50 29.00 0.445 0.602 0.768 0.768 0.937 0.886 1.142 5.50 5.50 6.50 6.50 8.00 8.00 10.00 0.217 0.217 0.256 0.256 0.315 0.315 0.394 7.70 7.70 9.30 9.30 12.50 12.50 15.60 0.303 0.303 0.367 0.367 0.492 0.492 0.614 10.0 26.0 50.0 68.0 120.0 170.0 360.0 0.420 0.620 0.910 1.190 1.930 2.780 4.750 0.924 1.364 2.002 2.618 4.246 6.116 10.450
M
E
N
S
I
O
65 21/2 65.00 2.559 129.50 5.098 170.50 6.713 244.00 9.606 102.00 4.016 M8 F10 33.00 1.299 12.00 0.472 18.80 0.740 510.0 8.630 18.986
m 80 3 78.00 3.071 139.50 5.492 191.00 7.520 244.00 9.606 102.00 4.016 M8 F10 33.00 1.299 12.00 0.472 18.80 0.740 900.0 13.460 29.612
P R E S S U R E
PSIG
1/4"
2000
T E M P E R AT U R E
R AT I N G
KPAG
- 1" 100°F (38°C)
13789
11/4" - 3" 100°F (38°C)
1500
10342
1000
6894
800
5515
600
4136
400
2757
300
2068
200
1378
150
1034
100
689
50
344
0
-20
0
50
100
150
200
250
300
350
400
450
500
(°F)
-29
-18
10
38
66
93
121
149
177
214
232
260
(°C)
MASCA CA11/08/05 08/05 MAS
0
G Series Investment Cast Stainless Steel Ball Valves
G3SW
J
Full port Socket Weld ends to ANSI B16.11 Three piece body Blowout-proof stem Adjustable packing gland Locking lever handle ISO 5211 mounting pad 2000 PSI, WOG 1/4" to 1" 1500 PSI, WOG 11/4" to 3"
I
/4" to 11/4"
1
ØE
F
3" 1000WOG 0696
4.7
11/2" to 3"
D
Butt-Weld end available on request
N A M E / M AT E R I A L 1. Handle Grip/ Vinyl 2. Handle / Stainless Steel 304 - A276 3. Locking Device / Stainless Steel 304 - A276 4. Handle Nut /Stainless Steel 304 - A276 5. Stem Washer / Stainless Steel 304 - A276 6. Gland Nut / Stainless Steel 304 - A276 7. Packing / PTFE 8. Stem / Stainless Steel 316 - A276 9. Thrust Washer / Reinforced Teflon 15% GFT 10. Gasket / PTFE 11. Hex Nut / Stainless Steel A194 Grade 8 12. Bolt / Stainless Steel A193 Grade 8 13. Ball / Stainless Steel 316 - A351 - CF8M 14. Body / Stainless Steel 316 - A351 - CF8M 15. Seat / Reinforced Teflon 15% GFT 16. Cap / Stainless Steel 316L - A351 - CF3M 17. Bolt Washer / Stainless Steel 304 - A276
H B
G A
• Markings to MSS-SP25 • Material test results & inspection certificates available upon request. • CRN numbers available upon request
m
D
I
M
E
N
S
I
O
C
N
S
size 8 10 15 20 25 32 40 50 1 3 1 3 mm/in /4 /8 /2 /4 1 11/4 11/2 2 A 9.50 9.50 15.00 20.00 25.00 32.00 38.00 50.50 mm/in 0.374 0.374 0.591 0.787 0.984 1.260 1.496 1.988 B 67.00 67.00 68.50 75.00 79.00 88.50 94.50 107.00 mm/in 2.638 2.638 2.697 2.953 3.110 3.484 3.720 4.213 C 60.00 60.00 70.00 76.00 92.00 105.00 120.00 138.00 mm/in 2.362 2.362 2.756 2.992 3.622 4.134 4.724 5.433 D 120.00 120.00 120.00 139.00 139.00 193.00 193.00 193.00 mm/in 4.724 4.724 4.724 5.472 5.472 7.598 7.598 7.598 E 36.00 36.00 36.00 42.00 42.00 50.00 70.00 70.00 mm/in 1.417 1.417 1.417 1.653 1.653 1.968 2.756 2.756 F M6 M6 M6 M6 M6 M8 M8 M8 ISO Flg F03 F03 F03 F04 F04 F05 F07 F07 G 14.20 17.60 21.70 27.10 33.80 42.60 48.70 61.00 mm/in 0.559 0.693 0.854 1.067 1.330 1.677 1.917 2.402 H 11.30 11.30 15.30 19.50 19.50 23.80 22.50 29.00 mm/in 0.445 0.445 0.602 0.768 0.768 0.937 0.886 1.142 I 5.50 5.50 5.50 6.50 6.50 8.00 8.00 10.00 mm/in 0.217 0.217 0.217 0.256 0.256 0.315 0.315 0.394 J 7.70 7.70 7.70 9.30 9.30 12.50 12.50 15.60 mm/in 0.303 0.303 0.303 0.367 0.367 0.492 0.492 0.614 CV 10.0 10.0 26.0 50.0 68.0 120.0 170.0 360.0 wt. 0.415 0.400 0.600 0.880 1.150 1.870 2.670 4.620 kg/lb 0.913 0.880 1.320 1.936 2.530 4.114 5.874 10.164
65 21/2 65.00 2.559 129.50 5.098 170.50 6.713 244.00 9.606 102.00 4.016 M8 F10 73.80 2.906 33.00 1.299 12.00 0.472 18.80 0.740 510.0 8.250 18.150
m 80 3 78.00 3.071 139.50 5.492 191.00 7.520 244.00 9.606 102.00 4.016 M8 F10 90.00 3.543 33.00 1.299 12.00 0.472 18.80 0.740 900.0 13.000 28.600
P R E S S U R E
PSIG
1/4"
2000
T E M P E R AT U R E
R AT I N G
KPAG
- 1" 100°F (38°C)
13789
11/4" - 3" 100°F (38°C)
1500
10342
1000
6894
800
5515
600
4136
400
2757
300
2068
200
1378
150
1034
100
689
50
344
0
-20
0
50
100
150
200
250
300
350
400
450
500
(°F)
-29
-18
10
38
66
93
121
149
177
214
232
260
(°C)
MAS MASCA CA11/08/05 08/05
0
G Series Investment Cast Stainless Steel Ball Valves
G-3-HD-FS
Fire-safe to API-607 4th edition
WOG SIZE
G-3-HD-FS 3000 STEM 316 1 BALL 316
BODY CF8M SEAT NACE
WOG SIZE
R-PTFE
G-3-HD-FS 1000 STEM 316 3 BALL 316
BODY CF8M SEAT
TAIWAN
NACE
SIZE 1/2" - 2"
R-PTFE
TAIWAN
SIZE 2-1/2" - 3"
D
H
A
C J
I
F
m
• Markings to MSS-SP25. • Material test results & inspection certificates available upon request. • CRN numbers available upon request.
P R E S S U R E
PSIG
T E M P E R AT U R E
R AT I N G
KPAG
1/2" - 2" 100F (38°C)
3000 1500
20684 10342
21/2" - 3" 100F (38°C)
1000
6894
800
5515
600
4136
400
2757
300
2068
200
1378
150
1034
100
689
50
344
0
photo to come
4.8
N A M E / M AT E R I A L 1. Handle Grip/ Vinyl 2. Handle / Stainless Steel 304 - A276 3. Locking Device / Stainless Steel 304 - A276 4. Stem Washer / Stainless Steel 304 - A276 5. Handle Nuts / Stainless Steel 304 - A 276 6. Lock Washer / Stainless Steel 304 - A 276 7. Belleville Washer / Stainless Steel 301 8. Gland / Stainless Steel 316 - A 276 9. Packing / Graphite 10. Stem / Stainless Steel 316 - A276m 11. Thrust Washer / R-PTFE (TFM4215) 12. Gasket / Graphite + Stainless Steel 316 13. Hex Nut / Stainless Steel A194 grade 8MA 14. Stud Bolt / Stainless Steel A193 grade B8MA 15. Ball / Stainless Steel 316 - A351 - CF8Mm 16. Body / Stainless Steel 316 - A351 - CF8M 17. Seat / R-PTFE (TFM4215) 18. Cap / Stainless Steel 316 - A351 - CF8M 19. Spring & Pin / Stainless Steel 316 - A276
B
ØE
Full port NPT threads to ANSI B1.20.1 Encapsulated bolt design Adjustable packing nut 3 piece body with blowout-proof stem NACE MR-01-75 Anti-static design Floating ball Locking lever handle ISO 5211 mounting pad 3000 PSI, WOG 1/2" to 2" 1000 PSI, WOG 21/2" to 3"
-20
0
50
100
150
200
250
300
350
400
450
500
(F)
-29
-18
10
38
66
93
121
149
177
214
232
260
(C)
0
size mm/in A mm/in B mm/in C mm/in D mm/in E mm/in F H mm/in I mm/in J mm/in Flange CV Weights kg / lb
MAS MASCA CA11/08/05 08/05
D 15 1 /2 15.00 0.591 68.50 2.697 68.5 2.697 120.00 4.724 36.00 1.417 M6 15.50 0.610 5.50 0.217 7.70 0.303 F03 26 0.700 1.540
I
M 20 3 /4 20.00 0.787 75.00 2.953 80.5 3.169 139.00 5.472 42.00 1.653 M6 18.50 0.728 6.50 0.256 9.30 0.367 F04 50 1.200 2.640
E 25 1 25.00 0.984 79.00 3.110 91.5 3.602 139.00 5.472 42.00 1.653 M6 18.50 0.728 6.50 0.256 9.30 0.367 F04 68 1.660 3.652
N 32 11/4 32.00 1.260 88.50 3.484 100.5 3.957 193.00 7.598 50.00 1.968 M8 23.50 0.925 8.00 0.315 12.50 0.492 F05 120 2.470 5.434
S
I 40 11/2 38.00 1.496 94.50 3.720 117.0 4.606 193.00 7.598 70.00 2.756 M8 23.50 0.925 8.00 0.315 12.50 0.492 F07 170 3.870 8.514
O 50 2 50.50 1.988 107.00 4.213 133.5 5.256 193.00 7.598 70.00 2.756 M8 27.00 1.063 10.00 0.394 15.60 0.614 F07 360 6.800 14.960
N 65 21/2 65.00 2.559 129.50 5.098 157.8 6.213 244.00 9.606 102.00 4.016 M8 30.00 1.181 12.00 0.472 18.80 0.740 F10 510 10.250 22.550
S
m 80 3 78.00 3.071 139.50 5.492 178.0 7.008 244.00 9.606 102.00 4.016 M8 30.00 1.181 12.00 0.472 18.80 0.740 F10 900 15.580 34.276
G Series Investment Cast Stainless Steel Ball Valves
G4
G
Three way L-port O W
F
Reduced port
G-4
FL
I
NPT ends to ANSI B1.20.1 Two piece body with floating ball
K
J
Blowout-proof stem
E
Adjustable packing gland Locking lever handle
4.9
ISO 5211 mounting pad
D
H
1000 PSI, WOG 1/4" to 2" Optional 3-way T-port available
N A M E / M AT E R I A L 1. Handle Grip / Vinyl 2. Locking Device / Stainless Steel 304 - A276 3. Handle Nut / Stainless Steel 304 - A 276 4. Stem Washer / Stainless Steel 304 - A 276 5. Handle / Stainless Steel 304 - A276 6. Gland Nut / Stainless Steel 304 - A276 7. Stem Packing / PTFE 8. Gasket / PTFE 9. Thrust Washer / Reinforced Teflon 15% GFT 10. Stem / Stainless Steel 316 - A276 11. Seat / Reinforced Teflon 15% GFT 12. Ball / Stainless Steel 316 - A 351 - CF8M 13. Cap / Stainless Steel 316 - A 351 - CF8M 14. Body / Stainless Steel 316 - A 351 - CF8M
A
B C Flow Pattern From Top View Rotation 0°
90°
45°
m • Open port pressure must exceed closed port pressure, diverter service • Application in the 45° position may degrade performance of seat at the 0° & 90° positions • Material test results & inspection certificates available upon request. • CRN numbers available upon request • Markings to MSS-SP-25 P R E S S U R E
PSIG
T E M P E R AT U R E
R AT I N G
KPAG 13789
2000 1500
1/4"
1000
10342
- 2" 100°F (38°C)
6894
800
5515
600
4136
400
2757
300
2068
200
1378
150
1034
100
689
50
344
0
-20
0
50
100
150
200
250
300
350
400
450
500
(°F)
-29
-18
10
38
66
93
121
149
177
214
232
260
(°C)
0
MASCA CA03/08/05 08/05 MAS
D
size mm/in A mm/in B mm/in C mm/in D mm/in E mm/in F mm/in G mm/in H mm/in I mm/in J mm/in K CV weights kg/lb
I
M
E
N
S
I
O
N
S
m
8 10 15 20 25 32 40 50 1 3 1 3 /4 /8 /2 /4 1 11/4 11/2 2 11.10 12.70 12.70 17.30 20.60 25.40 31.80 38.10 0.44 0.50 0.50 0.68 0.81 1.00 1.25 1.50 29.35 29.35 29.35 38.10 40.75 51.00 55.50 68.50 1.16 1.16 1.16 1.50 1.60 2.01 2.19 2.70 58.70 58.70 58.70 76.20 82.00 102.00 111.00 137.00 2.31 2.31 2.31 3.00 3.23 4.02 4.37 5.39 50.80 50.80 50.80 58.50 62.35 74.10 78.85 94.20 2.00 2.00 2.00 2.29 2.46 2.92 3.10 3.71 100.00 100.00 100.00 130.00 130.00 155.00 155.00 175.00 3.94 3.94 3.94 5.12 5.12 6.10 6.10 6.89 30.00 30.00 30.00 38.10 42.67 51.00 61.00 71.37 1.18 1.18 1.18 1.50 1.68 2.01 2.40 2.81 36.00 36.00 36.00 36.00 42.00 50.00 50.00 50.00 1.42 1.42 1.42 1.42 1.65 1.97 1.97 1.97 15.30 15.30 15.30 17.00 18.40 23.00 23.00 25.40 0.60 0.60 0.60 0.67 0.72 0.91 0.91 1.00 5.45 5.45 5.45 6.45 6.45 8.00 8.00 10.00 0.22 0.22 0.22 0.25 0.25 0.32 0.32 0.39 7.70 7.70 7.70 9.30 9.30 12.50 12.50 15.50 0.30 0.30 0.30 0.37 0.37 0.49 0.49 0.61 M6 x 1.0 M6 x 1.0 M6 x 1.0 M6 x 1.0 M6 x 1.0 M8 x 1.25 M8 x 1.25 M8 x 1.25 4 5.4 5.4 12 15 21 34 47 0.390 0.360 0.330 0.660 0.850 1.490 2.040 3.160 0.858 0.792 0.726 1.452 1.870 3.278 4.488 6.952
F Series Flanged Ball Valves
Order code information 5.1
Body Rating 150 Class 150 300 Class 300 600 Class 600
Shell Material CS WCB LC LCC SS CF8M
Valve Design
Trim Material For WCB/LCC
R Reduced bore, Uni-body for Class 150 & 300
SS 316 Stainless Steel
Fire-Safe (Optional) FS Fire-Safe
Other N Nace
(No symbol is suffixed if CF8M shell material)
R Reduced bore, Split-body for Class 600 F Full bore, Split -body
The order code system lets you specify your pressure class, material, design (reduced or full port), trim materials and whether or not you require Fire-Safe materials to API 607 4th edition.
Please contact us for more information on: • • • • •
So for instance, a 150 pressure class in carbon steel with reduced port and stainless trims with fire-safe seals would be indicated as: F-150-CS-R-SS-FS-N Refer to the chart above for feature designations.
MAS CA 08/05
Special Trims Manual Operators Pneumatic Operators Electric Operators Control Packages
F Series Flanged Carbon Steel Ball Valves
F-150-CS-R-SS-N
J
Reduced port, One piece body ANSI B16.34 Class 150 I
Blowout-proof stem ISO 5211 Mounting pad Floating Ball, Anti-static device
P (Ø)
M (4 typical)
Fire-safe design
E
Valves comply to NACE MR-01-75 N A M E / M AT E R I A L
K
R
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21.
A
DCG B
H-N
F-150-CS-R-SS-FS-N CLASS 150 SIZE 2 B16.34 PTFE BODY WCB TRIM 316 NACE
RATING
285 PSIG AT 100°F/200 PSIG AT 400° MAX
P R E S S U R E
TAIWAN
PSIG
F-150-LC-R-SS-N CLASS 150 SIZE 2 B16.34 PTFE BODY LCC TRIM 316 NACE 290 PSIG AT 100°F/200 PSIG AT 400° MAX
(FS*: Graphite)
FS* only: Body Seal / Graphite (LC: A352 LCC) (LC: A352 LCC) *Fire Safe Certified to API-607 4th Ed.
CS – IDENTIFICATION PLATE (1) FIG. SEAT RATING
5.2
OPTIONAL
TAIWAN
FIG. SEAT
F
T
L
STANDARD Lock Plate / Stainless Steel 304 - A276. Retaining Ring / Carbon Steel. Handle / Ductile Iron Stopper Plate / Stainless Steel 304 - A276 Lock Washer / Stainless Steel 304 - A276 Gland Nut / Carbon Steel. Stopper Pin / Stainless Steel 304 - A276 Lock Washer / Stainless Steel 304 - A276 Belleville Washer / Stainless Steel 301. Gland / Stainless Steel 304 - A276. Packing / PTFE. Thrust Washer / Reinforced Teflon 15% GFT Stem / Stainless Steel 316 - A276 Anti-Static Device / Stainless Steel 304 - A276 Identification Plate / Stainless Steel 304 - A276 Ball / A351 - CF8M N/A Body Seal / PTFE (TFM-1600). Body Insert / A216-WCB. Body / A216-WCB. Seat / PTFE (TFM-1600).
290
300
T E M P E R AT U R E
R AT I N G
kg/cm2
Class 150 Body Rating: (WCB) (LCC)*
21.0
285
14.0
200
LC – IDENTIFICATION PLATE (1)
150
TEST PRESSURE SHELL SEAT API-598 HYDROSTATIC 450 PSIG AIR 80 PSIG END TO END ANSI B16.10 CLASS 150 DIM. OF FLANGE ANSI B16.5 CLASS 150 WALL THICKNESS ANSI B16.34 CLASS 150
4" - 6"
100
10.5
1/2" - 3"
7.0
50
3.5
0
-20
0
50
100
150
200
250
300
350
400
450
0 500 (F)
-29
-18
10
38
66
93
121
149
177
214
232
260 (C)
*LCC body rated to -50F/-46C m
D size 2" 3" 4" 6"
A mm/in 38 1.50 58 2.28 76 3.00 114 4.49
I B mm/in 50 1.97 76 3.00 102 4.02 152 5.98
C mm/in 120.5 4.75 152.5 6.00 190.5 7.50 241.5 9.50
M D mm/in 152 5.98 190 7.48 229 9.02 279 10.98
E mm/in 230 9.06 400 15.75 400 15.75 750 29.53
E F mm/in 1.6 0.06 1.6 0.06 1.6 0.06 1.6 0.06
G mm/in 92 3.62 127 5.00 157 6.18 216 8.50
N H mm/in 19 0.75 19 0.75 19 0.75 22 0.88
I mm/in 14 0.55 17 0.67 17 0.67 23 0.91
S J mm/in 20 0.79 25 0.98 25 0.98 34 1.34
K mm/in 125 4.92 168 6.61 183 7.20 245 9.65
MAS CA 08/05
I L mm/in 178 7.00 203 8.00 229 9.02 267 10.51
O
M mm/in 0.3125
N mm/in 4
0.3125
4
0.3125
8
0.5000
8
P mm/in 70 2.76 70 2.76 70 2.76 125 4.92
N T mm/in 15.9 0.63 19.1 0.75 23.9 0.94 25.4 1.00
R mm/in 49 1.93 59 2.32 59 2.32 73 2.87
S ISO 5211 flange type F07 F07 F07 F12
m Weight (kg/lb) 8.00 17.60 15.70 34.54 24.60 54.12 49.50 108.90
F Series Flanged Carbon Steel Ball Valves
F-150-CS-F-SS-N
J
I
Full port, Two piece body ANSI B16.34 Class 150 Blowout-proof stem ISO 5211 Mounting pad Floating Ball, Anti-static device Fire-safe design Valves comply to NACE MR-01-75
P (Ø)
M (4 typical)
E
R
K
N A M E / M AT E R I A L 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22.
5.3
DCG B
H-N
T
F-150-CS-F-SS-N CLASS 150 SIZE 2 B16.34 PTFE-S BODY WCB TRIM 316 NACE 285 PSIG AT 100°F/200 PSIG AT 400° MAX
TAIWAN
L FIG. SEAT RATING
F
P R E S S U R E
SEAT RATING
150
SIZE
2
B16.34
PTFE-S BODY LCC TRIM 316 NACE 290 PSIG AT 100°F/200 PSIG AT 400° MAX
TAIWAN
PSIG F-150-LC-F-SS-N CLASS
OPTIONAL
(FS*: Graphite)
(LC: A352 LCC) (LC: A352 LCC) (FS*: Graphite) (LC: A194 7M) (LC FS: A320 Grade L7M) *Fire Safe Certified to API-607 4th Ed.
CS – IDENTIFICATION PLATE (1) FIG.
STANDARD Lock Plate / Stainless Steel 304 - A276. Retaining Ring / Carbon Steel. Handle / Ductile Iron Stopper Plate / Stainless Steel 304 - A276. Lock Washer / Stainless Steel 304 - A276. Gland Nut / Carbon Steel. Stopper Pin / Stainless Steel 304 - A276. Lock Washer / Stainless Steel 304 - A276. Belleville Washer / Stainless Steel 301. Gland / Stainless Steel 304 - A276. Packing / PTFE. Thrust Washer / RPTFE 15% GFT Stem / Stainless Steel 316 - A276 Anti-Static Device / Stainless Steel 304 - A276. Identification Plate / Stainless Steel 304 - A276 Ball / A351 - CF8M Seat / PTFE (TFM-1600). Body / A216-WCB. Cap / A216-WCB. Body Seal / PTFE. Bolt Nut / A194 Grade 2HM. Stud Bolt / A193 Grade B7M.
300 200
LC – IDENTIFICATION PLATE (1)
290
T E M P E R AT U R E
kg/cm2 21.0
285
14.0
150
TEST PRESSURE SHELL SEAT API-598 HYDROSTATIC 450 PSIG AIR 80 PSIG END TO END ANSI B16.10 CLASS 150 DIM. OF FLANGE ANSI B16.5 CLASS 150 WALL THICKNESS ANSI B16.34 CLASS 150
R AT I N G
Class 150 Body Rating: (WCB) (LCC)*
10.5
1/2" - 4"
6"
7.0
100
Body Marking
50
3.5
0
-20
0
50
100
150
200
250
300
350
400
450
0 500 (F)
-29
-18
10
38
66
93
121
149
177
214
232
260 (C)
*LCC body rated to -50F/-46C m
D size (mm/in) /2"
1
/4"
3
1" 11/2" 2" 21/2" 3" 4" 6"
I B 15 0.59 19 0.75 24 0.95 38 1.50 50 1.97 65 2.56 76 3.00 100 3.94 150 5.91
C 60.5 2.38 70.0 2.75 79.0 3.12 98.5 3.88 120.5 4.75 139.7 5.50 152.5 6.00 190.5 7.50 241.5 9.50
M D 89 3.50 98.5 3.88 108 4.25 127 5.00 152 5.98 178 7.00 190 7.48 229 9.02 279 10.98
E 130 5.12 130 5.12 160 6.30 230 9.06 230 9.06 400 15.75 400 15.75 460 18.11 1000 39.37
E F 1.6 0.06 1.6 0.06 1.6 0.06 1.6 0.06 1.6 0.06 1.6 0.06 1.6 0.06 1.6 0.06 1.6 0.06
G 35 1.38 43 1.69 51 2.00 73 2.88 92 3.62 104.6 4.12 127 5.00 157 6.18 216 8.50
N H 16 0.62 16 0.62 16 0.62 16 0.62 19 0.75 19 0.75 19 0.75 19 0.75 22 0.88
I 8 0.31 8 0.31 10 0.39 14 0.55 14 0.55 17 0.67 17 0.67 23 0.91 27 1.06
S J 11 0.43 11 0.43 14 0.55 20 0.79 20 0.79 25 0.98 25 0.98 34 1.34 40 1.57
K 83 3.27 86 3.39 104 4.09 125 4.92 134.5 5.30 170.5 6.71 181.5 7.15 205.5 8.09 289.5 11.40
MAS MASCA CA02/08/05 08/05
I L 108 4.25 117 4.62 127 5.00 165 6.50 178 7.00 190.5 7.50 203 8.00 229 9.02 394 15.51
O
M 0.25
N 4
0.25
4
0.25
4
0.3125
4
0.3125
4
0.3750
4
0.3750
4
0.5000
8
0.6250
8
P 36 1.42 36 1.42 50 1.97 70 2.76 70 2.76 102 4.02 102 4.02 125 4.92 140 5.51
T 11.2 0.44 11.2 0.44 11.2 0.44 14.3 0.56 15.9 0.63 17.5 0.69 19.1 0.75 23.9 0.94 25.4 1.00
N
S
R 27 1.06 27 1.06 35.5 1.40 49 1.93 49 1.93 61 2.40 61 2.40 73 2.87 90 3.54
ISO 5211 flange F03 F03 F05 F07 F07 F10 F10 F12 F14
m kg/lb 1.64 3.60 2.00 4.40 3.15 6.93 6.26 13.77 9.30 20.46 16.82 37.00 22.00 48.40 37.00 81.40 85.3 187.66
F Series Flanged Carbon Steel Ball Valves
F-300-CS-R-SS-N
J
I
Reduced port, One piece body ANSI B16.34 Class 300 Blowout-proof stem ISO 5211 Mounting pad Floating Ball, Anti-static device Fire-safe design Valves comply to NACE MR-01-75
P (Ø)
M (4 typical)
E
N A M E / M AT E R I A L
K
R
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21.
A
DCG B
H-N F
T
L
STANDARD Lock Plate / Stainless Steel 304 - A276. Retaining Ring / Carbon Steel. Handle / Ductile Iron Stopper Plate / Stainless Steel 304 - A276 Lock Washer / Stainless Steel 304 - A276 Gland Nut / Carbon Steel. Stopper Pin / Stainless Steel 304 - A276 Lock Washer / Stainless Steel 304 - A276 Belleville Washer / Stainless Steel 301. Gland / Stainless Steel 304 - A276. Packing / PTFE. Thrust Washer / Reinforced Teflon 15% GFT Stem / Stainless Steel 316 - A276 Anti-Static Device / Stainless Steel 304 - A276 Identification Plate / Stainless Steel 304 - A276 Ball / A351 - CF8M N/A Body Seal / PTFE (TFM-1600). Body Insert / A216-WCB. Body / A216-WCB. Seat / PTFE.(TFM-1600)
OPTIONAL
5.4
(FS*: Graphite)
FS* only: Body Seal / Graphite (LC: A352 LCC) (LC: A352 LCC)
F-300-CS-R-SS-N PTFE
RATING
CLASS 300 SIZE 2 B16.34 BODY WCB TRIM 316 NACE
740 PSIG AT 100°F/200 PSIG AT 400° MAX
TAIWAN
*Fire Safe Certified to API-607 4th Ed. FIG. SEAT
PSIG kg/cm2 P R E S S U R E T E M P E R AT U R E R AT I N G 800 750 56.0 700 740 49.0 600 42.0 Class 300 Body Rating: (WCB) (LCC)* 35.0 500 11/2" - 3" 4" - 6" 400 28.0 1/2" - 1" 300 21.0 200 14.0 150 10.5 100 7.0 50 3.5 0 0 -20 0 50 100 150 200 250 300 350 400 450 500 (F)
FIG. SEAT RATING
F-300-LC-R-SS-N CLASS
300
SIZE
2
B16.34
PTFE BODY LCC TRIM 316 NACE 750 PSIG AT 100°F/200 PSIG AT 400° MAX
TAIWAN
CS – IDENTIFICATION PLATE (1)
LC – IDENTIFICATION PLATE (1) TEST PRESSURE SHELL SEAT API-598 HYDROSTATIC 1125 PSIG AIR 80 PSIG END TO END ANSI B16.10 CLASS 300 DIM. OF FLANGE ANSI B16.5 CLASS 300 WALL THICKNESS ANSI B16.34 CLASS 300
-29
Body Marking
-18
10
38
66
93
121
149
177
214
232
260 (C)
*LCC body rated to -50F/-46C m
D size 2" 3" 4" 6"
A mm/in 38 1.50 58 2.28 76 3.00 114 4.49
I B mm/in 50 1.97 76 3.00 102 4.02 152 5.98
C mm/in 127 5.00 168 6.61 200 7.87 270 10.63
M D mm/in 165 6.50 210 8.27 254 10.00 318 12.52
E mm/in 230 9.06 400 15.75 400 15.75 750 29.53
E F mm/in 1.6 0.06 1.6 0.06 1.6 0.06 1.6 0.06
G mm/in 92 3.62 127 5.00 157 6.18 216 8.50
N H mm/in 19 0.75 22 0.88 22 0.88 22 0.88
I mm/in 14 0.55 17 0.67 17 0.67 23 0.91
S J mm/in 20 0.79 25 0.98 25 0.98 34 1.34
K mm/in 125 4.92 168 6.61 183 7.20 245 9.65
MASCA CA02/08/05 08/05 MAS
I L mm/in 216 8.50 283 11.14 305 12.00 403 15.87
O
M mm/in 0.3125
N mm/in 8
0.3125
8
0.3125
8
0.5000
12
P mm/in 70 2.76 70 2.76 70 2.76 125 4.92
N T mm/in 22.3 0.88 28.5 1.12 31.8 1.25 36.6 1.44
R mm/in 49 1.93 59 2.32 59 2.32 73 2.87
S ISO 5211 flange type F07 F07 F07 F12
m Weight (kg/lb) 11.19 24.62 23.47 51.63 35.72 78.58 79.21 174.26
F Series Flanged Carbon Steel Ball Valves
F-300-CS-F-SS-N
J
I
Full port, Two piece body ANSI B16.34 Class 300 Blowout-proof stem ISO 5211 Mounting pad Floating Ball, Anti-static device Fire-safe design Valves comply to NACE MR-01-75
P (Ø)
M (4 typical)
E
R
K
N A M E / M AT E R I A L
5.5
DCG B
H-N
T
F-300-CS-F-SS-N CLASS 300 SIZE 2 B16.34 PTFE BODY WCB TRIM 316 NACE 740 PSIG AT 100°F/200 PSIG AT 400° MAX
TAIWAN
L FIG. SEAT RATING
F
F-300-LC-F-SS-N CLASS
300
SIZE
2
B16.34
PTFE BODY LCC TRIM 316 NACE 750 PSIG AT 100°F/200 PSIG AT 400° MAX
(FS*: Graphite)
(LC: A352 LCC) (LC: A352 LCC) (FS*: Graphite) (LC: A194 Grade 7M) (LC: A320 Grade L7M) *Fire Safe Certified to API-607 4th Ed.
TAIWAN
FIG.
OPTIONAL
PSIG kg/cm2 P R E S S U R E T E M P E R AT U R E R AT I N G 800 750 56.0 700 740 49.0 600 570 42.0 3" - 4" Class 300 Body Rating: (WCB) (LCC)* 35.0 500 6" 400 28.0 1/2" - 2" 300 21.0 200 14.0 150 10.5 100 7.0 50 3.5 0 0 -20 0 50 100 150 200 250 300 350 400 450 500 (F)
CS – IDENTIFICATION PLATE (1)
SEAT RATING
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22.
STANDARD Lock Plate / Stainless Steel 304 - A276. Retaining Ring / Carbon Steel. Handle / Ductile Iron Stopper Plate / Stainless Steel 304 - A276. Lock Washer / Stainless Steel 304 - A276. Gland Nut / Carbon Steel. Stopper Pin / Stainless Steel 304 - A276. Lock Washer / Stainless Steel 304 - A276. Belleville Washer / Stainless Steel 301. Gland / Stainless Steel 304 - A276. Packing / PTFE. Thrust Washer / RPTFE 15% GFT Stem / Stainless Steel 316 - A276 Anti-Static Device / Stainless Steel 304 - A276. Identification Plate / Stainless Steel 304 - A276 Ball / A351 - CF8M Seat / PTFE (TFM-1600). Body / A216-WCB. Cap / A216-WCB. Body Seal / PTFE. Bolt Nut / A194 Grade 2HM. Stud Bolt / A193 Grade B7M.
LC – IDENTIFICATION PLATE (1) TEST PRESSURE SHELL SEAT API-598 HYDROSTATIC 1125 PSIG AIR 80 PSIG END TO END ANSI B16.10 CLASS 300 DIM. OF FLANGE ANSI B16.5 CLASS 300 WALL THICKNESS ANSI B16.34 CLASS 300
Body Marking
-29
-18
10
38
66
93
121
149
177
214
232
260 (C)
*LCC body rated to -50F/-46C m
D size (mm/in) /2"
1
/4"
3
1" 11/2" 2" 21/2" 3" 4" 6"
I B 15 0.59 19 0.75 24 0.95 38 1.50 50 1.97 65 2.56 76 3.00 100 3.94 150 5.91
C 66.5 2.62 82.5 3.25 89.0 3.50 114.5 4.50 127.0 5.00 149.4 5.88 168 6.62 200 7.87 270 10.63
M D 95 3.75 117 4.62 124 4.88 156 6.14 165 6.50 190.5 7.50 210 8.27 254 10.00 318 12.52
E 130 5.12 130 5.12 160 6.30 230 9.06 230 9.06 400 15.75 400 15.75 750 29.53 1000 39.37
E F 1.6 0.06 1.6 0.06 1.6 0.06 1.6 0.06 1.6 0.06 1.6 0.06 1.6 0.06 1.6 0.06 1.6 0.06
G 35 1.38 43 1.69 51 2.00 73 2.88 92 3.62 104.6 4.12 127 5.00 157 6.18 216 8.50
N H 16 0.62 19 0.75 19 0.75 22 0.88 19 0.75 22 0.88 22 0.88 22 0.88 22 0.88
I 8 0.31 8 0.31 10 0.39 14 0.55 14 0.55 17 0.67 17 0.67 23 0.91 27 1.06
S J 11 0.43 11 0.43 14 0.55 20 0.79 20 0.79 25 0.98 25 0.98 34 1.34 40 1.57
K 83 3.27 86 3.39 104 4.09 125 4.92 134.5 5.30 170.5 6.71 181.5 7.15 205.5 8.09 289.5 11.40
MAS MASCA CA02/08/05 08/05
I L 140 5.50 152.5 6.00 165 6.50 190.5 7.50 216 8.50 241.3 9.50 283 11.14 305 12.00 403 15.87
O
M 0.25
N 4
0.25
4
0.25
4
0.3125
4
0.3125
8
0.3750
8
0.3750
8
0.5000
8
0.6250
12
P 36 1.42 36 1.42 50 1.97 70 2.76 70 2.76 102 4.02 102 4.02 125 4.92 140 5.51
T 14.2 0.56 15.8 0.62 17.5 0.69 20.6 0.81 22.3 0.88 25.4 1.00 28.5 1.12 31.8 1.25 36.6 1.44
N
S
R 27 1.06 27 1.06 35.5 1.40 49 1.93 49 1.93 61 2.40 61 2.40 73 2.87 90 3.54
ISO 5211 flange F03 F03 F05 F07 F07 F10 F10 F12 F14
m kg/lb 2.20 4.84 3.29 7.23 4.76 10.47 9.14 20.10 12.80 28.16 22.73 50.00 29.60 65.12 50.40 110.88 107.3 236.06
F Series Flanged Carbon Steel Ball Valves
F-600-CS-R-SS-N
J
I
Reduced port, Two piece body ANSI B16.34 Class 600 ISO 5211 Mounting pad Floating Ball Anti-static device Fire-safe design Valves comply to NACE MR-01-75
P (Ø)
M (4 typical)
E
K
R
N A M E / M AT E R I A L
A
DCG B
H-N
F-600-CS-R-SS-N
CLASS
C-PTFE
BODY
RATING
600
SIZE
2
B16.34
WCB TRIM 316 NACE
1480 PSIG AT 100°F/200 PSIG AT 400° MAX
600 SIZE 2 B16.34 LCC TRIM 316 NACE
750 PSIG AT 100°F/200 PSIG AT 400° MAX
TAIWAN
RATING
F-600-LC-R-SS-N CLASS C-PTFE BODY
5.6
(FS*: Graphite) (LC: A352 LCC)
(LC: A352 LCC)
(LC: A194 Grade 7M) (LC: A320 Grade L7M)
PSIG kg/cm2 P R E S S U R E T E M P E R AT U R E R AT I N G 1600 1500 112.0 1400 1480 1440 98.0 1200 84.0 3" 4" Class 600 Body Rating: (WCB) (LCC)* 70.0 1000 800 56.0 2" 6" 600 740 42.0 400 28.0 200 14.0 150 10.5 100 7.0 50 3.5 0 480 0 -20 0 50 100 150 200 250 300 350 400 450 500 (F)
CS – IDENTIFICATION PLATE (1) FIG. SEAT
OPTIONAL
*Fire Safe Certified to API-607 4th Ed.
TAIWAN
FIG. SEAT
F
T
L
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22.
STANDARD Lock Plate / SS 304 - A276. Retaining Ring / Carbon Steel. Handle / Ductile Iron Stopper Plate / SS 304 - A276. Lock Washer / SS 304 - A276. Gland Nut / Carbon Steel. Stopper Pin / SS 304 - A276. Lock Washer / SS 304 - A276. Belleville Washer / SS 301. Gland / Stainless Steel 304 - A276. Packing / PTFE Cap / A216 WCB Thrust Washer / RPTFE 15% GFT Stem / Stainless Steel 316 - A276 Anti-Static Device / SS 304 - A276. Ball / A351 - CF8M Body / A216 WCB Identification Plate / SS 304 - A276 Seat / PTFE +25% Carbon. Body Seal / 304 + Graphite Bolt Nut / A194 Grade 2HM. Stud Bolt / A193 Grade B7M.
LC – IDENTIFICATION PLATE (1) TEST PRESSURE SHELL SEAT API-598 HYDROSTATIC 2225 PSIG AIR 80 PSIG END TO END ANSI B16.10 CLASS 600 DIM. OF FLANGE ANSI B16.5 CLASS 600 WALL THICKNESS ANSI B16.34 CLASS 600
Body Marking
-29
-18
10
38
66
93
121
149
177
214
232
249
260 (C)
*LCC body rated to -50F/-46C m
D size 2" 3" 4" 6"
A mm/in 38 1.50 58 2.28 76 3.00 114 4.49
I B mm/in 50 1.97 76 3.00 102 4.02 152 5.98
C mm/in 127 5.00 168 6.61 216 8.50 292 11.50
M D mm/in 165 6.50 210 8.27 273 10.75 356 14.02
E mm/in 230 9.06 400 15.75 400 15.75 750 29.53
E F mm/in 6.35 0.25 6.35 0.25 6.35 0.25 6.35 0.25
G mm/in 92 3.62 127 5.00 157 6.18 216 8.50
N H mm/in 19 0.75 22.3 0.88 25.4 1.00 28.5 1.12
I mm/in 14 0.55 17 0.67 17 0.67 23 0.91
S J mm/in 20 0.79 25 0.98 25 0.98 34 1.34
K mm/in 144.5 5.69 180 7.09 194 7.64 256 10.08
MAS MASCA CA02/08/05 08/05
I L mm/in 292 11.50 356 14.02 432 17.00 559 22.00
O
M mm/in 0.3125
N mm/in 8
0.3125
8
0.3125
8
0.5000
12
P mm/in 70 2.76 70 2.76 70 2.76 125 4.92
N T mm/in 31.8 1.25 38.1 1.5 44.5 1.75 54.1 2.13
R mm/in 49 1.93 59 2.32 59 2.32 73 2.87
S ISO 5211 flange type F07 F07 F07 F12
m Weight (kg/lb) 15.72 34.58 33.05 72.71 61.64 135.61 131.83 290.03
F Series Flanged Carbon Steel Ball Valves
F-600-CS-F-SS-N
J
I
Full port, Two piece body ANSI B16.34 Class 600 P (Ø)
M (4 typical)
ISO 5211 Mounting pad E
Floating Ball Anti-static device Fire-safe design
R
Valves comply to NACE MR-01-75
K
N A M E / M AT E R I A L
5.7
DCG B
H-N
F-600-CS-F-SS-N
CLASS
SEAT
C-PTFE-S
BODY
RATING
600
SIZE
2
B16.34
WCB TRIM 316 NACE
1450 PSIG AT 100°F/200 PSIG AT 400° MAX
SEAT
C-PTFE-S
RATING
BODY
600
SIZE
2
B16.34
LCC TRIM 316 NACE
1450 PSIG AT 100°F/200 PSIG AT 400° MAX
TAIWAN
F-600-LC-F-SS-N CLASS
(FS*: Graphite)
(LC: A352 LCC) (LC: A352 LCC) (LC: A194 Grade 7M) (LC: A320 Grade L7M)
PSIG kg/cm2 P R E S S U R E T E M P E R AT U R E R AT I N G 1600 1500 112.0 1400 1480 1450 98.0 1200 84.0 Class 600 Body Rating: (WCB) (LCC)* 70.0 2" 1000 3"- 4" 800 56.0 6" 600 740 42.0 400 28.0 200 14.0 150 10.5 100 7.0 50 3.5 0 480 0 -20 0 50 100 150 200 250 300 350 400 450 500 (F)
CS – IDENTIFICATION PLATE (1) FIG.
OPTIONAL
*Fire Safe Certified to API-607 4th Ed.
TAIWAN
FIG.
F
T
L
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22.
STANDARD Lock Plate / SS 304 - A276. Retaining Ring / Carbon Steel. Handle / Ductile Iron Stopper Plate / SS 304 - A276. Lock Washer / SS 304 - A276. Gland Nut / Carbon Steel. Stopper Pin / SS 304 - A276. Lock Washer / SS 304 - A276. Belleville Washer / Stainless Steel 301. Gland / Stainless Steel 304 - A276. Packing / PTFE. Body Seal / 304 + Graphite. Thrust Washer / RPTFE 15% GFT Stem / Stainless Steel 316 - A276 Anti-Static Device / SS 304 - A276. Ball / A351 - CF8M Body / A216 WCB. Identification Plate / SS 304 - A276 Cap / A216 WCB. Seat / PTFE +25% Carbon. Bolt Nut / A194 Grade 2HM. Stud Bolt / A193 Grade B7M.
LC – IDENTIFICATION PLATE (1) TEST PRESSURE SHELL SEAT API-598 HYDROSTATIC 2225 PSIG AIR 80 PSIG END TO END ANSI B16.10 CLASS 600 DIM. OF FLANGE ANSI B16.5 CLASS 600 WALL THICKNESS ANSI B16.34 CLASS 600
Body Marking
-29
-18
10
38
66
93
121
149
177
214
232
249
260 (C)
*LCC body rated to -50F/-46C m
D size 2" 3" 4" 6"
I B mm/in 50 1.97 76 3.00 100 3.94 150 5.91
C mm/in 127 5.00 168 6.61 216 8.50 292 11.50
M D mm/in 165 6.50 210 8.27 273 10.75 356 14.02
E mm/in 230 9.06 400 15.75 460 18.11 1000 39.37
E F mm/in 6.35 0.25 6.35 0.25 6.35 0.25 6.35 0.25
G mm/in 92 3.62 127 5.00 157 6.18 216 8.50
N H mm/in 19 0.75 22.3 0.88 25.4 1.00 28.5 1.12
I mm/in 14 0.55 17 0.67 23 0.91 27 1.06
S J mm/in 20 0.79 25 0.98 34 1.34 40 1.57
K mm/in 158 6.22 194 7.64 215.5 8.48 301.5 11.87
MASCA CA02/08/05 08/05 MAS
I L mm/in 292 11.50 356 14.02 432 17.00 559 22.00
O
M mm/in 0.3125
N mm/in 8
0.3750
8
0.5000
8
0.6250
12
P mm/in 70 2.76 102 4.02 125 4.92 140 5.51
N T mm/in 31.8 1.25 38.1 1.50 44.5 1.75 54.1 2.13
R mm/in 49 1.93 61 2.40 73 2.87 90 3.54
S ISO 5211 flange type F07 F10 F12 F14
m Weight (kg/lb) 17.26 37.97 39.25 86.35 71.74 157.83 161.62 355.56
F Series Flanged Stainless Steel Ball Valves
F-150-SS-R-N
J
Reduced port, One piece body I
ANSI B16.34 Class 150 Blowout-proof stem ISO 5211 Mounting pad
P (Ø)
M (4 typical)
Floating Ball, Anti-static device
E
Fire-safe design N A M E / M AT E R I A L
K
R
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21.
A
DCG B
H-N
F-150-SS-R-N CLASS 150 SIZE 2 B16.34 PTFE BODY CF8M TRIM 316 NACE 275 PSIG AT 100°F/195 PSIG AT 400° MAX
D size 2" 3" 4" 6"
I B mm/in 50 1.97 76 3.00 102 4.02 152 5.98
C mm/in 120.5 4.75 152.5 6.00 190.5 7.50 241.5 9.50
(LC: A352 LCC) (LC: A352 LCC)
TAIWAN
T E M P E R AT U R E
R AT I N G
kg/cm2 21.0
275
14.0
150
4" - 6"
100
10.5
1/2" - 3"
7.0 3.5
50 0
Body Marking
M D mm/in 152 5.98 190 7.48 229 9.02 279 10.98
FS* only: Body Seal / Graphite
200
TEST PRESSURE SHELL SEAT API-598 HYDROSTATIC 425 PSIG AIR 80 PSIG END TO END ANSI B16.10 CLASS 150 DIM. OF FLANGE ANSI B16.5 CLASS 150 WALL THICKNESS ANSI B16.34 CLASS 150
A mm/in 38 1.50 58 2.28 76 3.00 114 4.49
(FS*: Graphite)
Class 150 Body Rating: (CF8M)
300
SS-FS – IDENTIFICATION PLATE (1)
m
P R E S S U R E
PSIG
F-150-SS-R-FS-N CLASS 150 SIZE 2 B16.34 PTFE BODY CF8M TRIM 316 NACE 275 PSIG AT 100°F/195 PSIG AT 400° MAX
5.8
*Fire Safe Certified to API-607 4th Ed.
SS – IDENTIFICATION PLATE (1) FIG. SEAT RATING
OPTIONAL
TAIWAN
FIG. SEAT RATING
F
T
L
STANDARD Lock Plate / Stainless Steel 304 - A276. Retaining Ring / Carbon Steel. Handle / Ductile Iron Stopper Plate / Stainless Steel 304 - A276. Lock Washer / Stainless Steel 304 - A276. Gland Nut / Stainless Steel 304 - A276. Stopper Pin / Stainless Steel 304 - A276. Lock Washer / Stainless Steel 304 - A276. Belleville Washer / Stainless Steel 301. Gland / Stainless Steel 304 - A276. Packing / PTFE. Thrust Washer / RPTFE 15% GFT. Stem / Stainless Steel 316 - A276. Anti-Static Device / Stainless Steel 304 - A276. Identification Plate / Stainless Steel 304 - A276. Ball / A351 - CF8M N/A Body Seal / PTFE Body Insert / A351 - CF8M Body / A351 - CF8M. Seat / PTFE (TFM-1600).
E mm/in 230 9.06 400 15.75 400 15.75 750 29.53
E F mm/in 1.6 0.06 1.6 0.06 1.6 0.06 1.6 0.06
G mm/in 92 3.62 127 5.00 157 6.18 216 8.50
-20
0
50
100
150
200
250
300
350
400
450
0 500 (°F)
-29
-18
10
38
66
93
121
149
177
214
232
260 (°C)
L mm/in 178 7.00 203 8.00 229 9.02 267 10.51
M mm/in 0.3125
N mm/in 4
0.3125
4
0.3125
8
0.5000
8
N H mm/in 19 0.75 19 0.75 19 0.75 22 0.88
I mm/in 14 0.55 17 0.67 17 0.67 23 0.91
S J mm/in 20 0.79 25 0.98 25 0.98 34 1.34
K mm/in 125 4.92 168 6.61 183 7.20 245 9.65
MAS CA 08/05
I
O P mm/in 70 2.76 70 2.76 70 2.76 125 4.92
N T mm/in 15.9 0.63 19.1 0.75 23.9 0.94 25.4 1.00
R mm/in 49 1.93 59 2.32 59 2.32 73 2.87
S ISO 5211 flange type F07 F07 F07 F12
m Weight (kg/lb) 8.00 17.60 15.70 34.54 24.60 54.12 49.50 108.90
F Series Flanged Stainless Steel Ball Valves
F-150-SS-F-N
J
I
Full port, Two piece body ANSI B16.34 Class 150 Blowout-proof stem ISO 5211 Mounting pad Floating Ball, Anti-static device Fire-safe design
P (Ø)
M (4 typical)
E
R
K
N A M E / M AT E R I A L 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22.
5.9
DCG B
H-N
F-150-SS-F-N PTFE
RATING
CLASS
150
SIZE
2
B16.34
BODY CF8M TRIM 316 NACE
275 PSIG AT 100°F/195 PSIG AT 400° MAX
TAIWAN
FIG. SEAT
F
T
L
P R E S S U R E
SEAT RATING
150
SIZE
2
B16.34
PTFE BODY CF8M TRIM 316 NACE 275 PSIG AT 100°F/195 PSIG AT 400° MAX
TAIWAN
PSIG F-150-SS-F-FS-N CLASS
200
D /2"
1
/4"
3
1" 11/2" 2" 21/2" 3" 4" 6"
C 60.5 2.38 70.0 2.75 79.0 3.12 98.5 3.88 120.5 4.75 139.7 5.50 152.5 6.00 190.5 7.50 241.5 9.50
E 130 5.12 130 5.12 160 6.30 230 9.06 230 9.06 400 15.75 400 15.75 460 18.11 1000 39.37
E F 1.6 0.06 1.6 0.06 1.6 0.06 1.6 0.06 1.6 0.06 1.6 0.06 1.6 0.06 1.6 0.06 1.6 0.06
G 35 1.38 43 1.69 51 2.00 73 2.88 92 3.62 104.6 4.12 127 5.00 157 6.18 216 8.50
I 8 0.31 8 0.31 10 0.39 14 0.55 14 0.55 17 0.67 17 0.67 23 0.91 27 1.06
21.0
275
14.0 10.5
1/2" - 4"
6"
7.0
-20
0
50
100
150
200
250
300
350
400
450
0 500 (°F)
-29
-18
10
38
66
93
121
149
177
214
232
260 (°C)
S J 11 0.43 11 0.43 14 0.55 20 0.79 20 0.79 25 0.98 25 0.98 34 1.34 40 1.57
kg/cm2
3.5
N H 16 0.62 16 0.62 16 0.62 16 0.62 19 0.75 19 0.75 19 0.75 19 0.75 22 0.88
R AT I N G
50
Body Marking
M D 89 3.50 98.5 3.88 108 4.25 127 5.00 152 5.98 178 7.00 190 7.48 229 9.02 279 10.98
T E M P E R AT U R E
100 0
I B 15 0.59 19 0.75 24 0.95 38 1.50 50 1.97 65 2.56 76 3.00 100 3.94 150 5.91
(FS*: Graphite)
150
TEST PRESSURE SHELL SEAT API-598 HYDROSTATIC 425 PSIG AIR 80 PSIG END TO END ANSI B16.10 CLASS 150 DIM. OF FLANGE ANSI B16.5 CLASS 150 WALL THICKNESS ANSI B16.34 CLASS 150
size (mm/in)
(FS*: Graphite)
Class 150 Body Rating: (CF8M)
300
SS-FS – IDENTIFICATION PLATE (1)
m
OPTIONAL
*Fire Safe Certified to API-607 4th Ed.
SS – IDENTIFICATION PLATE (1)
FIG.
STANDARD Lock Plate / Stainless Steel 304 - A276. Retaining Ring / Carbon Steel. Handle / Ductile Iron Stopper Plate / Stainless Steel 304 - A276. Lock Washer / Stainless Steel 304 - A276. Gland Nut / Stainless Steel 304 - A276. Stopper Pin / Stainless Steel 304 - A276. Lock Washer / Stainless Steel 304 - A276. Belleville Washer / Stainless Steel 301. Gland / Stainless Steel 304 - A276. Packing / PTFE. Thrust Washer / RPTFE 15% GFT Stem / Stainless Steel 316 - A276 Anti-Static Device / Stainless Steel 304 - A276. Identification Plate / Stainless Steel 304 - A276 Ball / A351 - CF8M Seat / PTFE (TFM-1600). Body / A351 - CF8M Cap / A351 - CF8M Body Seal / PTFE. Bolt Nut / A194 Grade 8MA. Stud Bolt / A193 Grade B8M.
K 83 3.27 86 3.39 104 4.09 125 4.92 134.5 5.30 170.5 6.71 181.5 7.15 205.5 8.09 289.5 11.40
MAS CA CA 08/05 0304 MAS
I L 108 4.25 117 4.62 127 5.00 165 6.50 178 7.00 190.5 7.50 203 8.00 229 9.02 394 15.51
O
M 0.25
N 4
0.25
4
0.25
4
0.3125
4
0.3125
4
0.3750
4
0.3750
4
0.5000
8
0.6250
8
P 36 1.42 36 1.42 50 1.97 70 2.76 70 2.76 102 4.02 102 4.02 125 4.92 140 5.51
T 11.2 0.44 11.2 0.44 11.2 0.44 14.3 0.56 15.9 0.63 17.5 0.69 19.1 0.75 23.9 0.94 25.4 1.00
N
S
R 27 1.06 27 1.06 35.5 1.40 49 1.93 49 1.93 61 2.40 61 2.40 73 2.87 90 3.54
ISO 5211 flange F03 F03 F05 F07 F07 F10 F10 F12 F14
m kg/lb 1.64 3.60 2.00 4.40 3.15 6.93 6.26 13.77 9.30 20.46 16.82 37.00 22.00 48.40 37.00 81.40 85.3 187.66
F Series Flanged Stainless Steel Ball Valves
F-300-SS-R-N
J
Reduced port, One piece body I
ANSI B16.34 Class 300 Blowout-proof stem ISO 5211 Mounting pad
P (Ø)
M (4 typical)
Floating Ball, Anti-static device
E
Fire-safe design N A M E / M AT E R I A L
K
R
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21.
A
DCG B
H-N F
T
L
STANDARD Lock Plate / Stainless Steel 304 - A276. Retaining Ring / Carbon Steel. Handle / Ductile Iron Stopper Plate / Stainless Steel 304 - A276. Lock Washer / Stainless Steel 304 - A276. Gland Nut / Stainless Steel 304 - A276. Stopper Pin / Stainless Steel 304 - A276. Lock Washer / Stainless Steel 304 - A276. Belleville Washer / Stainless Steel 301. Gland / Stainless Steel 304 - A276. Packing / PTFE. Thrust Washer / RPTFE 15% GFT Stem / Stainless Steel 316 - A276. Anti-Static Device / Stainless Steel 304 - A276. Identification Plate / Stainless Steel 304 - A276. Ball / A351 - CF8M. N/A Body Seal / PTFE . Body Insert / A351 - CF8M. Body / A351 - CF8M. Seat / PTFE (TFM-1600).
OPTIONAL
5.10
(FS*: Graphite)
FS* only: Body Seal / Graphite (LC: A352 LCC) (LC: A352 LCC)
SEAT RATING
F-300-SS-R-N
CLASS
300
SIZE
2
B16.34
PTFE BODY CF8M TRIM 316 NACE 720 PSIG AT 100°F/195 PSIG AT 400° MAX
TAIWAN
*Fire Safe Certified to API-607 4th Ed. FIG.
PSIG P R E S S U R E T E M P E R AT U R E R AT I N G 800 700 720 Class 300 Body Rating: (CF8M) 600 500 11/2" - 3" 400 1/2" - 1" 300 4" - 6" 200 150 100 50 0 -20 0 50 100 150 200 250 300 350 400 450
FIG.
F-300-SS-R-FS-N
SEAT
PTFE
RATING
CLASS
300
SIZE
2
B16.34
BODY CF8M TRIM 316 NACE
720 PSIG AT 100°F/195 PSIG AT 400° MAX
TAIWAN
SS – IDENTIFICATION PLATE (1)
SS-FS – IDENTIFICATION PLATE (1)
TEST PRESSURE SHELL SEAT API-598 HYDROSTATIC 1100 PSIG AIR 80 PSIG END TO END ANSI B16.10 CLASS 300 DIM. OF FLANGE ANSI B16.5 CLASS 300 WALL THICKNESS ANSI B16.34 CLASS 300
m
D size 2" 3" 4" 6"
A mm/in 38 1.50 58 2.28 76 3.00 114 4.49
I B mm/in 50 1.97 76 3.00 102 4.02 152 5.98
C mm/in 127 5.00 168 6.61 200 7.87 270 10.63
M D mm/in 165 6.50 210 8.27 254 10.00 318 12.52
-29
Body Marking
E mm/in 230 9.06 400 15.75 400 15.75 750 29.53
E F mm/in 1.6 0.06 1.6 0.06 1.6 0.06 1.6 0.06
G mm/in 92 3.62 127 5.00 157 6.18 216 8.50
N H mm/in 19 0.75 22 0.88 22 0.88 22 0.88
I mm/in 14 0.55 17 0.67 17 0.67 23 0.91
-18
10
L mm/in 216 8.50 283 11.14 305 12.00 403 15.87
M mm/in 0.3125
N mm/in 8
0.3125
8
0.3125
8
0.5000
12
S J mm/in 20 0.79 25 0.98 25 0.98 34 1.34
K mm/in 125 4.92 168 6.61 183 7.20 245 9.65
MAS CA 08/05
38
66
I
93
121
O P mm/in 70 2.76 70 2.76 70 2.76 125 4.92
149
177
N T mm/in 22.3 0.88 28.5 1.12 31.8 1.25 36.6 1.44
R mm/in 49 1.93 59 2.32 59 2.32 73 2.87
214
232
S ISO 5211 flange type F07 F07 F07 F12
kg/cm2 56.0 49.0 42.0 35.0 28.0 21.0 14.0 10.5 7.0 3.5 0 500 (°F) 260 (°C)
m Weight (kg/lb) 11.19 24.62 23.47 51.63 35.72 78.58 79.21 174.26
F Series Flanged Stainless Steel Ball Valves
F-300-SS-F-N
J
I
Full port, Two piece body ANSI B16.34 Class 300 Blowout-proof stem ISO 5211 Mounting pad Floating Ball, Anti-static device Fire-safe design
P (Ø)
M (4 typical)
E
R
K
N A M E / M AT E R I A L
5.11
DCG B
H-N
F-300-SS-F-N
CLASS
300
SIZE
2
B16.34
PTFE BODY CF8M TRIM 316 NACE 720 PSIG AT 100°F/195 PSIG AT 400° MAX
TAIWAN
F-300-SS-F-FS-N CLASS 300 SIZE 2 B16.34 PTFE BODY CF8M TRIM 316 NACE 720 PSIG AT 100°F/195 PSIG AT 400° MAX SS-FS – IDENTIFICATION PLATE (1)
TEST PRESSURE SHELL SEAT API-598 HYDROSTATIC 1100 PSIG AIR 80 PSIG END TO END ANSI B16.10 CLASS 300 DIM. OF FLANGE ANSI B16.5 CLASS 300 WALL THICKNESS ANSI B16.34 CLASS 300
m
D size (mm/in) /2"
1
/4"
3
1" 11/2" 2" 21/2" 3" 4" 6"
Body Marking
-29
I B 15 0.59 19 0.75 24 0.95 38 1.50 50 1.97 65 2.56 76 3.00 100 3.94 150 5.91
C 66.5 2.62 82.5 3.25 89.0 3.50 114.5 4.50 127.0 5.00 149.4 5.88 168 6.62 200 7.87 270 10.63
M D 95 3.75 117 4.62 124 4.88 156 6.14 165 6.50 190.5 7.50 210 8.27 254 10.00 318 12.52
E 130 5.12 130 5.12 160 6.30 230 9.06 230 9.06 400 15.75 400 15.75 750 29.53 1000 39.37
(FS*: Graphite)
(FS*: Graphite)
PSIG P R E S S U R E T E M P E R AT U R E R AT I N G 800 700720 Class 300 Body Rating (CF8M) 600550 3" 4" 500 6" 400 1/2" - 2" 300 200 150 100 50 0 -20 0 50 100 150 200 250 300 350 400 450
SS – IDENTIFICATION PLATE (1) FIG. SEAT RATING
OPTIONAL
*Fire Safe Certified to API-607 4th Ed.
TAIWAN
FIG. SEAT RATING
F
T
L
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22.
STANDARD Lock Plate / Stainless Steel 304 - A276. Retaining Ring / Carbon Steel. Handle / Ductile Iron Stopper Plate / Stainless Steel 304 - A276. Lock Washer / Stainless Steel 304 - A276. Gland Nut / Stainless Steel 304 - A276. Stopper Pin / Stainless Steel 304 - A276. Lock Washer / Stainless Steel 304 - A276. Belleville Washer / Stainless Steel 301. Gland / Stainless Steel 304 - A276. Packing / PTFE. Thrust Washer / RPTFE 15% GFT Stem / Stainless Steel 316 - A276 Anti-Static Device / Stainless Steel 304 - A276. Identification Plate / Stainless Steel 304 - A276 Ball / A351 - CF8M Seat / PTFE (TFM-1600). Body / A351 - CF8M Cap / A351 - CF8M Body Seal / PTFE. Bolt Nut / A194 Grade 8MA. Stud Bolt / A193 Grade B8M.
E F 1.6 0.06 1.6 0.06 1.6 0.06 1.6 0.06 1.6 0.06 1.6 0.06 1.6 0.06 1.6 0.06 1.6 0.06
G 35 1.38 43 1.69 51 2.00 73 2.88 92 3.62 104.6 4.12 127 5.00 157 6.18 216 8.50
N H 16 0.62 19 0.75 19 0.75 22 0.88 19 0.75 22 0.88 22 0.88 22 0.88 22 0.88
I 8 0.31 8 0.31 10 0.39 14 0.55 14 0.55 17 0.67 17 0.67 23 0.91 27 1.06
-18
S J 11 0.43 11 0.43 14 0.55 20 0.79 20 0.79 25 0.98 25 0.98 34 1.34 40 1.57
K 83 3.27 86 3.39 104 4.09 125 4.92 134.5 5.30 170.5 6.71 181.5 7.15 205.5 8.09 289.5 11.40
MAS MASCA CA11/08/05 08/05
10
38
66
I L 140 5.50 152.5 6.00 165 6.50 190.5 7.50 216 8.50 241.3 9.50 283 11.14 305 12.00 403 15.87
93
121
O
M 0.25
N 4
0.25
4
0.25
4
0.3125
4
0.3125
8
0.3750
8
0.3750
8
0.5000
8
0.6250
12
P 36 1.42 36 1.42 50 1.97 70 2.76 70 2.76 102 4.02 102 4.02 125 4.92 140 5.51
T 14.2 0.56 15.8 0.62 17.5 0.69 20.6 0.81 22.3 0.88 25.4 1.00 28.5 1.12 31.8 1.25 36.6 1.44
149
177
214
N
S
R 27 1.06 27 1.06 35.5 1.40 49 1.93 49 1.93 61 2.40 61 2.40 73 2.87 90 3.54
ISO 5211 flange F03 F03 F05 F07 F07 F10 F10 F12 F14
232
kg/cm2 56.0 49.0 42.0 35.0 28.0 21.0 14.0 10.5 7.0 3.5 0 500 (°F) 260 (°C)
m kg/lb 2.20 4.84 3.29 7.23 4.76 10.47 9.14 20.10 12.80 28.16 22.73 50.00 29.60 65.12 50.40 110.88 107.3 236.06
F Series Flanged Stainless Steel Ball Valves
F-600-SS-R-N
J
I
Reduced port, Two piece body ANSI B16.34 Class 600 ISO 5211 Mounting pad Blowout-proof stem Anti-static device Floating Ball Fire-safe design
P (Ø)
M (4 typical)
E
K
R
N A M E / M AT E R I A L
A
DCG B
H-N F
T
L
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22.
STANDARD Lock Plate / SS 304 - A276. Retaining Ring / Carbon Steel. Handle / Ductile Iron Stopper Plate / SS 304 - A276. Lock Washer / SS 304 - A276. Gland Nut / SS 304 - A276. Stopper Pin / SS 304 - A276. Lock Washer / SS 304 - A276. Belleville Washer / SS 301. Gland / SS 304 - A276. Packing / PTFE Cap / A351 - CF8M Thrust Washer / RPTFE 15% GFT Stem / SS 316 - A276 Anti-Static Device / SS 304 - A276. Ball / A351 - CF8M Body / A351 - CF8M Identification Plate / SS 304 - A276 Seat / PTFE +25% Carbon. Body Seal / 304 + Graphite Bolt Nut / A194 Grade 8MA. Stud Bolt / A193 Grade B8M.
OPTIONAL
5.12
(FS*: Graphite)
F-600-SS-R-N
SEAT
C-PTFE
RATING
CLASS
600
SIZE
2
B16.34
BODY CF8M TRIM 316 NACE
1440 PSIG AT 100°F/195 PSIG AT 400° MAX
TAIWAN
*Fire Safe Certified to API-607 4th Ed. FIG.
PSIG P R E S S U R E T E M P E R AT U R E R AT I N G 1600 1400 1440 Class 600 Body Rating: (CF8M) 1200 3" 1000 4" 800 740 2" 6" 600 400 200 150 100 50 0 -20 0 50 100 150 200 250 300 350 400 450
FIG. SEAT RATING
F-600-SS-R-FS-N CLASS 600 SIZE 2 B16.34 C-PTFE BODY CF8M TRIM 316 NACE 1440 PSIG AT 100°F/195 PSIG AT 400° MAX
TAIWAN
SS – IDENTIFICATION PLATE (1)
SS-FS – IDENTIFICATION PLATE (1) TEST PRESSURE SHELL SEAT API-598 HYDROSTATIC 2175 PSIG AIR 80 PSIG END TO END ANSI B16.10 CLASS 600 DIM. OF FLANGE ANSI B16.5 CLASS 600 WALL THICKNESS ANSI B16.34 CLASS 600
m
D size 2" 3" 4" 6"
A mm/in 38 1.50 58 2.28 76 3.00 114 4.49
I B mm/in 50 1.97 76 3.00 102 4.02 152 5.98
C mm/in 127 5.00 168 6.61 216 8.50 292 11.50
Body Marking
M D mm/in 165 6.50 210 8.27 273 10.75 356 14.02
E mm/in 230 9.06 400 15.75 400 15.75 750 29.53
E F mm/in 6.35 0.25 6.35 0.25 6.35 0.25 6.35 0.25
G mm/in 92 3.62 127 5.00 157 6.18 216 8.50
-29
N H mm/in 19 0.75 22.3 0.88 25.4 1.00 28.5 1.12
I mm/in 14 0.55 17 0.67 17 0.67 23 0.91
-18
10
L mm/in 292 11.50 356 14.02 432 17.00 559 22.00
M mm/in 0.3125
N mm/in 8
0.3125
8
0.3125
8
0.5000
12
S J mm/in 20 0.79 25 0.98 25 0.98 34 1.34
K mm/in 144.5 5.69 180 7.09 194 7.64 256 10.08
MAS MASCA CA22/08/05 08/05
38
66
I
93
121
O P mm/in 70 2.76 70 2.76 70 2.76 125 4.92
149
177
N T mm/in 31.8 1.25 38.1 1.5 44.5 1.75 54.1 2.13
R mm/in 49 1.93 59 2.32 59 2.32 73 2.87
214
232
S ISO 5211 flange type F07 F07 F07 F12
kg/cm2 112.0 98.0 84.0 70.0 56.0 42.0 28.0 14.0 10.5 7.0 3.5 480 0 500 (°F) 249
260 (°C)
m Weight (kg/lb) 15.72 34.58 33.05 72.71 61.64 135.61 131.83 290.03
F Series Flanged Stainless Steel Ball Valves
F-600-SS-F-N
J
I
Full port, Two piece body ANSI B16.34 Class 600 P (Ø)
M (4 typical)
ISO 5211 Mounting pad E
Blowout-proof stem Anti-static device Floating Ball
R
Fire-safe design
K
N A M E / M AT E R I A L
5.13
DCG B
H-N
F-600-CS-F-N
SEAT
C-PTFE
RATING
CLASS
600
SIZE
2
B16.34
BODY CF8M TRIM 316 NACE
1440 PSIG AT 100°F/195 PSIG AT 400° MAX
F-600-SS-F-SS-N CLASS C-PTFE-S
RATING
600
SIZE
2
B16.34
BODY CF8M TRIM 316 NACE
1440 PSIG AT 100°F/195 PSIG AT 400° MAX
TAIWAN
FIG.
SS-FS – IDENTIFICATION PLATE (1) TEST PRESSURE SHELL SEAT API-598 HYDROSTATIC 2175 PSIG AIR 80 PSIG END TO END ANSI B16.10 CLASS 600 DIM. OF FLANGE ANSI B16.5 CLASS 600 WALL THICKNESS ANSI B16.34 CLASS 600
m
D size 2" 3" 4" 6"
I B mm/in 50 1.97 76 3.00 100 3.94 150 5.91
C mm/in 127 5.00 168 6.61 216 8.50 292 11.50
Body Marking
-29
M D mm/in 165 6.50 210 8.27 273 10.75 356 14.02
E mm/in 230 9.06 400 15.75 460 18.11 1000 39.37
E F mm/in 6.35 0.25 6.35 0.25 6.35 0.25 6.35 0.25
(FS*: Graphite)
PSIG P R E S S U R E T E M P E R AT U R E R AT I N G 1600 Class 600 Body Rating (CF8M) 1400 1440 1200 2" 1000 3"- 4" 800 6" 600 740 400 200 150 100 50 0 -20 0 50 100 150 200 250 300 350 400 450
SS – IDENTIFICATION PLATE (1)
SEAT
OPTIONAL
*Fire Safe Certified to API-607 4th Ed.
TAIWAN
FIG.
F
T
L
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22.
STANDARD Lock Plate / SS 304 - A276. Retaining Ring / Carbon Steel. Handle / Ductile Iron Stopper Plate / SS 304 - A276. Lock Washer / SS 304 - A276. Gland Nut / SS 304 - A276. Stopper Pin / SS 304 - A276. Lock Washer / SS 304 - A276. Belleville Washer / SS 301. Gland / SS 304 - A276. Packing / PTFE. Body Seal / 304 + Graphite. Thrust Washer / RPTFE 15% GFT Stem / Stainless Steel 316 - A276 Anti-Static Device / SS 304 - A276. Ball / A351 - CF8M Body / A351 - CF8M Identification Plate / SS 304 - A276 Cap / A351 - CF8M. Seat / PTFE +25% Carbon. Bolt Nut / A194 Grade 8MA. Stud Bolt / A193 Grade B8M.
G mm/in 92 3.62 127 5.00 157 6.18 216 8.50
N H mm/in 19 0.75 22.3 0.88 25.4 1.00 28.5 1.12
I mm/in 14 0.55 17 0.67 23 0.91 27 1.06
-18
10
L mm/in 292 11.50 356 14.02 432 17.00 559 22.00
M mm/in 0.3125
N mm/in 8
0.3750
8
0.5000
8
0.6250
12
S J mm/in 20 0.79 25 0.98 34 1.34 40 1.57
K mm/in 158 6.22 194 7.64 215.5 8.48 301.5 11.87
MAS CA 08/05
38
66
I
93
121
O P mm/in 70 2.76 102 4.02 125 4.92 140 5.51
149
177
N T mm/in 31.8 1.25 38.1 1.50 44.5 1.75 54.1 2.13
R mm/in 49 1.93 61 2.40 73 2.87 90 3.54
214
232
S ISO 5211 flange type F07 F10 F12 F14
kg/cm2 112.0 98.0 84.0 70.0 56.0 42.0 28.0 14.0 10.5 7.0 3.5 480 0 500 (°F) 249
260 (°C)
m Weight (kg/lb) 17.26 37.97 39.25 86.35 71.74 157.83 161.62 355.56
We also supply these great brands of valves, fittings & automation services
Apollo Ball Valves: 150-600 ANSI Ball Valves, Bronze, Iron, Carbon, Stainless and Special Alloy. Top entry industrial maintenance valves. Pneumatic or Electrical operators.
Trunnion Ball Valves: Available in 2"-36", ANSI classes 150-2500; forged carbon and stainless steel; API 6D, API 6A, NACE MR01-75, API 6FA & API 607.
Carbon & Stainless Steel:
Cast Iron, Cast Steel &
Corrosion resistant: In SS,
Gate, Globe, Check & Ball valves – low emission.
Stainless Steel: Wafer &
Alloy 20 & SMO. Knife Gates; Tilting Disc Checks; Wedge Gates, Globe & Swing Checks; Sampling & Isolation.
Apollo: Butterfly valves
Bronze, Iron, Carbon, Stainless Steel & Specialty
Cast Iron, Ductile Iron &
American Valve: Cast Iron,
Max-Air/MAS brand
Alloy: Strainers, Butterfly
Carbon Steel: Wafer, tapped
lug and flanged bodies; Marine Design; 2 year factory warranty.
Ductile, Iron, Stainless Steel Flanged ball valves
pneumatic double acting & spring return 1/4 turn actuators. A great fit with our MAS “direct mount” G-series ball valves.
AUTOMATION
FITTINGS
Valves, Plug Valves & Check Valves.
Forged Steel: Gate, Globe,
Bronze & Brass: Gate,
Check & Trunnion Valves.
Globe, Check, Radiator, Y Strainers & Ball valves. Cast Iron: Gate, Globe, Check & Y Strainers.
Carbon & Stainless Steel:
Gate, Globe & Check Valves.
Checks.
Bronze, Brass, Cast Iron:
Gate, Globe, Check, Ball & Butterfly valves.
WKM Butterfly Valves and ‘E’ Series Rubber Seated Butterfly Valves Rugged,
economical multipurpose design.
MAS MASCA CA16/08/05 08/05
Pneumatic industrial and commercial designs. Electric operators for quarter, multiturn & linear applications.
150lb and 300lb Malleable Pipe Fittings.
6.1
www.mastewart.com
Head Office 12900–87th Avenue Surrey, British Columbia Canada V3W 3H9 mail to: P.O. 258, Surrey, BC, V3T 4W8 Phone: (604) 594-8431 Toll Free North America: (800) 594-8431 Fax: (604) 594-4335 e-mail: surrey@mastewart.com
Ontario Branch P.O. 308, Ajax, Ontario L1S 3C5 252 Hunt Street Ajax, Ontario L1S 1P7 Phone: (905) 683-7303 Fax: (905) 683-9108 e-mail: ajax@mastewart.com
Alberta Branch 6125 - 56th Avenue Edmonton, Alberta T6B 3E2 Phone: (780) 436-9051 Fax: (780) 435-0463 Toll Free in Alberta 1-800-232-7376 e-mail: edmonton@mastewart.com
Quebec Branch 79H Brunswick Blvd. Dollard-des-Ormeaux, Que. H9B 2J5 Phone: (514) 421-6311 Fax: (514) 421-6323 e-mail: montreal@mastewart.com
Sales Offices Calgary, Alberta Phone: (403) 252-7262 Fax: (403) 253-8455 Winnipeg , Manitoba Phone: (204) 837-5604 Fax: (204) 896-1992 Dartmouth, Nova Scotia Phone: (905) 683-7303 Fax: (905) 683-9108
USA Head Office Rubin Business Center II 801 Clanton Road, Suite C-108 Charlotte, North Carolina, 28217 Phone: (704) 527-0722 Toll Free: 866-582-5837 Fax: (704) 527-0791 Toll Free: 866-810-9287 E-mail: charlot@mastewart.com
Design improvements may subject materials & specifications to change without notice. Please refer to our web site for current products specs. MASCA CA16/08/05 08/05 MAS