Pl2016 general c

Page 1

GENERAL PRICE LIST PL2016-GENERAL-C Effective February 1, 2016


Table of Contents Table of contents

No. No. No. No. No. No. No.

W12 – AGS 22Z\x°. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-26 W13 – AGS 11Z\v°. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-26 100 and No. 110 1Z\x D Long Radius Elbows. . . . . . . . 1-27 W100 and W110 1Z\x D AGS Long Radius Elbow. . . . . 1-27 890 and 890H – Long Radius 90° . . . . . . . . . . . . . . 1-28 811 and 811H – 45°. . . . . . . . . . . . . . . . . . . . . . . . . 1-28 R-10G and No. R-10F Reducing Base Support Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-28 No. 10-DR Drain Elbow. . . . . . . . . . . . . . . . . . . . . . . . . . 1-29 No. 20 Tee. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-29 No. 29M Tee with Threaded Branch. . . . . . . . . . . . . . . . . . . 1-29 No. W20 AGS Tee. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-30 No. 820 and No. 820H Tee . . . . . . . . . . . . . . . . . . . . . . . . . 1-30 No. 35 Cross. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-31 No. 33 True Y. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-31 No. W35 AGS Cross. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-31 No. W33 AGS True Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-31 No(s). 40, 42, and 43 Adapter Nipples. . . . . . . . . . . . . . . . . 1-32 No(s). W42, W43 and W49 AGS Adapter Nipples . . . . . . . . . 1-32 No. 80 Female Threaded Adapter. . . . . . . . . . . . . . . . . . . . . 1-33 No(s). 18 and 19 Adapter Elbows . . . . . . . . . . . . . . . . . . . . . 1-33 No. 25 Grooved Reducing Tee . . . . . . . . . . . . . . . . . . . . . . . 1-34 No. W25 AGS Grooved Reducing Tee. . . . . . . . . . . . . . . . . . 1-36 No. 825 and No. 825H Reducing Tee. . . . . . . . . . . . . . . . . . 1-39 No. 29T Threaded Reducing Tee . . . . . . . . . . . . . . . . . . . . . 1-40 No. 50 Concentric Reducer . . . . . . . . . . . . . . . . . . . . . . . . . 1-42 No. 51 Eccentric Reducer. . . . . . . . . . . . . . . . . . . . . . . . . . . 1-42 No. W50 AGS Concentric Reducer. . . . . . . . . . . . . . . . . . . . 1-44 No. W51 AGS Eccentric Reducer . . . . . . . . . . . . . . . . . . . . . 1-44 No. 850 and No. 850H Concentric Reducer. . . . . . . . . . . . . 1-47 No. 851 and No. 851H Eccentric Reducer . . . . . . . . . . . . . . 1-47 No.(s) 53, 54 and 55 Swaged Nipples. . . . . . . . . . . . . . . . . . 1-48 No. 52 Reducer Threaded Small End . . . . . . . . . . . . . . . . . . 1-49 No. 30 Lateral. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-50 No. W30 AGS Lateral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-50 No. 60 Cap. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-51 No. W60 AGS Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-51 No. 860 and No. 860H Cap. . . . . . . . . . . . . . . . . . . . . . . . . 1-52 No. 61 Bull Plug. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-52 No. 30R Reducing Lateral. . . . . . . . . . . . . . . . . . . . . . . . . . . 1-53 No. W30R AGS Reducing Lateral . . . . . . . . . . . . . . . . . . . . . 1-54 No. 32 Tee Wyes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-55 No. 36B VicBlast™ Nozzle. . . . . . . . . . . . . . . . . . . . . . . . . . 1-55 No. 48 Hose Nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-56 No(s). 45 and 46 Flanged Adapter Nipples. . . . . . . . . . . . . . 1-56 No. W45R AGS Flanged Adapter Nipple . . . . . . . . . . . . . . . . 1-57 No(s). 845F and 846F Flat Face Flange Adapter Nipple . . . . 1-57 No(s). 845R and 846R Raised Face Flange Adapter Nipple. 1-57 3D Cast Bends for Abrasive Services. . . . . . . . . . . . . . . . . . 1-58 Long Radius Bends – 3D . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-59 Long Radius Bends – 5D . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-60 Long Radius Bends – 6D . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-61

VICTAULIC.COM PL2016-GENERAL-C

TABLE OF CONTENTS

Gasket Selection Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V SECTION 1 – Couplings and Fittings Style 107H QuickVic™ Rigid Coupling for Steel. . . . . . . . . . . . 1-2 Style 107N QuickVic™ Rigid Coupling. . . . . . . . . . . . . . . . . . . 1-2 Style 07 Zero-Flex™ Rigid Coupling . . . . . . . . . . . . . . . . . . . . 1-3 Style 07 Zero-Flex™ Rigid Coupling with Silicone Grade “L” Gasket or Fluoroelastomer Grade “O” Gasket. . . . . . . . . . . . . . . . . . 1-3 Style W07 AGS Rigid Coupling with Grade “E” Flush-Seal™ Gasket . . . . . . . . . . . . . . . . . . . . 1-4 Style W07 AGS Rigid Coupling with Grade “T” or Silicone Gasket. . . . . . . . . . . . . . . . . . . . . 1-5 Style 177 QuickVic™ Flexible Coupling for Steel . . . . . . . . . . . 1-5 Style 177N QuickVic™ Flexible Coupling for Steel. . . . . . . . . . 1-6 Style 77 Standard Flexible Coupling . . . . . . . . . . . . . . . . . . . . 1-7 Style 77 Standard Flexible Coupling with Silicone Grade “L” Gasket or Fluoroelastomer Grade “O” Gasket. . . . . . . . . . . . . . . . . 1-8 Style W77 AGS Flexible Coupling with Grade “E” Flush-Seal™ Gasket. . . . . . . . . . . . . . . . . . . . 1-9 Style W77 AGS Flexible Coupling with Grade “T” or “L” Flush-Seal™ Gasket. . . . . . . . . . . . . . 1-10 Style 75 Flexible Coupling. . . . . . . . . . . . . . . . . . . . . . . . . . . 1-11 Style 75 Flexible Coupling with Silicone Gasket. . . . . . . . . . . 1-11 Style 750 Reducing Coupling . . . . . . . . . . . . . . . . . . . . . . . . 1-12 Style 741 Vic-Flange Adapter. . . . . . . . . . . . . . . . . . . . . . . . . 1-12 Style W741 AGS Vic-Flange Adapter . . . . . . . . . . . . . . . . . . . 1-13 Style 743 Vic-Flange Adapter . . . . . . . . . . . . . . . . . . . . . . . . 1-13 Flange Washers – Styles 741, W741, 743 . . . . . . . . . . . . . . . 1-14 Style 72 Outlet Coupling. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-15 Style 791 and 792 Vic-Boltless Coupling. . . . . . . . . . . . . . . . 1-16 Style 791 Locking Pins. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-16 Style 78 Snap-Joint™ Coupling. . . . . . . . . . . . . . . . . . . . . . . 1-17 Style HP-70 Rigid Coupling. . . . . . . . . . . . . . . . . . . . . . . . . . 1-17 Style HP-70ES Coupling with “ES” Gasket. . . . . . . . . . . . . . . 1-18 Style 307 Transition Coupling . . . . . . . . . . . . . . . . . . . . . . . . 1-18 Style 171 Composite Flexible Coupling . . . . . . . . . . . . . . . . . 1-19 Style 808 Coupling for Double Groove Pipe. . . . . . . . . . . . . . 1-19 Style 870 Rigid Coupling. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-19 Gaskets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-20 Victaulic Lubricant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-23 Flange Gaskets – Styles 741, W741, 743. . . . . . . . . . . . . . . . 1-23 Swing Handle Wrench. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-23 Plated Trackhead Bolts and Nuts . . . . . . . . . . . . . . . . . . . . . 1-24 Installation Ready™ Bolts and Nuts . . . . . . . . . . . . . . . . . . . 1-24 Go-No-Go Tape. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-24 Elbows – No. 10 – 90°. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-25 No. 11 - 45° . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-25 No. W10 – 90° . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-25 No. W11 – 45°. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-25 No. 12 – 22Z\x°. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-26 No. 13 – 11Z\v° . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-26

I


Table of Contents

TABLE OF CONTENTS

XL Fittings and Couplings Style XL100/XL77/XL79 90° – 1Z\x D Elbows and Couplings. . . . . . . . . . . . . . . . . . . . . . . . 1-62 Style XL110/XL77/XL79 45° – 1Z\x D Elbows and Couplings. . . . . . . . . . . . . . . . . . . . . . . . 1-62 Style XL100/XL77/XL79 90° – 3D Elbows and Couplings. . . . . . . . . . . . . . . . . . . . . . . . 1-62 Style XL110/XL77/XL79 45° – 3D Elbows and Couplings. . . . . . . . . . . . . . . . . . . . . . . . 1-63 Style XL100/XL110 90° and 45° 1Z\x D Elbows. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-63 Style XL100/XL110 90° and 45° 3D Elbows. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-63 Style XLXL77/XL79 Couplings . . . . . . . . . . . . . . . . . . . . . 1-64 No. 62 90° Extra Heavy “ES” EndSeal Elbow . . . . . . . . . . . . 1-64 No. 63 45° Extra Heavy “ES” EndSeal Elbow . . . . . . . . . . . . 1-64 No. 64 Extra Heavy “ES” EndSeal Tee . . . . . . . . . . . . . . . . . 1-64 SECTION 2 – Cut Grooved Fittings for Rubber No. 12 – 22Z\x°. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 No. 13 – 11Z\v°. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 No. 20 Tee, No. 29M Tee with Threaded Branch . . . . . . . . . . 2-2 No. 35 Cross. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3 No. 33 True Y. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3 No. 25 Grooved Reducing Tee . . . . . . . . . . . . . . . . . . . . . . . . 2-4 No. 29T Threaded Reducing Tee . . . . . . . . . . . . . . . . . . . . . . 2-6 No. 30 Lateral. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7 No. 30R Reducing Lateral. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7 No. 32 Tee Wyes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8 No(s). 45 and 46 Flanged Adapter Nipples. . . . . . . . . . . . . . . 2-8 SECTION 3 – Hole Cut Products Styles 920/920N Female Threaded Mechanical-T Outlet. . . . . 3-2 Styles 920/920N Grooved Mechanical-T Outlet . . . . . . . . . . . 3-3 Styles 920/920N Mechanical-T Cross . . . . . . . . . . . . . . . . . . 3-4 Style 923 Strapless Outlet. . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7 Style 924 Thermometer Outlet . . . . . . . . . . . . . . . . . . . . . . . . 3-7 Style 931 Vic-Tap II. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8 SECTION 4 – Valves and Specialties Series 761 Vic-300 MasterSeal™ Butterfly Valve. . . . . . . . . . . 4-2 Series W761 Vic-300 AGS (14 – 24”) 300 psi Butterfly Valve. . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5 Series W709 AGS Butterfly Valve . . . . . . . . . . . . . . . . . . . . . . 4-6 Series 706 (14 – 24”) 300-psi Butterfly Valve. . . . . . . . . . . . . 4-6 Series 700 Butterfly Valve. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7 Series 7B2 Butterfly Valve. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7 Series 726 Grooved End Ball Valve. . . . . . . . . . . . . . . . . . . . . 4-8 Series 721 Grooved End Ball Valve. . . . . . . . . . . . . . . . . . . . . 4-8 Series 727 Ball Valve. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9 Series 722 Threaded Brass Ball Valve. . . . . . . . . . . . . . . . . . . 4-9 Series 712 Swing Check Valve. . . . . . . . . . . . . . . . . . . . . . . . 4-10 Series 713 High Pressure Check Valve . . . . . . . . . . . . . . . . . 4-10 Series 377 Valve. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-11 Series 716H/716 Vic-Check Valve. . . . . . . . . . . . . . . . . . . . . 4-11 Series W715 AGS Vic-Check Valve . . . . . . . . . . . . . . . . . . . . 4-12

II

Series 779 Venturi Check Valve. . . . . . . . . . . . . . . . . . . . . . . 4-12 Triple Service BFV/Check Valve Combination. . . . . . . . . . . . . 4-13 AGS Triple Service BFV/Check Valve Combination. . . . . . . . . 4-14 Triple Service BFV/Check Valve Combination with Venturi Flow Measurement Ports. . . . . . . . . . . . . . . . . . 4-15 Series 725 Diverter Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-16 Series 731-D Suction Diffuser. . . . . . . . . . . . . . . . . . . . . . . . 4-17 Series W731-D AGS Suction Diffuser. . . . . . . . . . . . . . . . . . . 4-17 Series 730 Vic-Strainer Tee-Type Strainer . . . . . . . . . . . . . . . 4-18 Series W730 AGS Vic-Strainer Tee Type Strainer. . . . . . . . . . 4-18 Series 732 Vic-Strainer Wye Type Strainer. . . . . . . . . . . . . . . 4-19 Series W732 Vic-Strainer Wye Type Strainer . . . . . . . . . . . . . 4-19 Style 150 Mover Expansion Joint. . . . . . . . . . . . . . . . . . . . . . 4-19 Style 156 Assembly Header . . . . . . . . . . . . . . . . . . . . . . . . . 4-20 SECTION 5 – Hydronic Balancing Products Manual Balancing Valves TA Series 786 STAS – Solder End . . . . . . . . . . . . . . . . . . . 5-2 TA Series 787 STAD – NPT (Fem.) End – (300 psi). . . . . . 5-2 Series 78K STADK. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2 TA Series 788 STAF – Flanged End. . . . . . . . . . . . . . . . . . 5-3 TA Series 789 STAG – Grooved End. . . . . . . . . . . . . . . . . . 5-3 TA Series 786 and 787 Insulation Kits. . . . . . . . . . . . . . . . 5-3 TA Series 788 and 789 Insulation Kits. . . . . . . . . . . . . . . . 5-4 TA Series 786 Drain Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4 Spare Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4 Automatic Balancing Valves Series 76T – Female x Female Threaded. . . . . . . . . . . . . . 5-5 Series 76B – Female x Female Threaded with a Ball Valve Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5 Series 76K – Male x Female Threaded. . . . . . . . . . . . . . . . 5-5 Series 76V – Male x Female Threaded with a Ball Valve Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6 Series 76G – Grooved . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6 Automatic Balancing Valve Cartridges . . . . . . . . . . . . . . . . 5-7 Balancing Control Valves TA Series TC – On/Off Control. . . . . . . . . . . . . . . . . . . . . . 5-8 TA Series TCM – Modulating Control . . . . . . . . . . . . . . . . . 5-8 TA Series TCP – Pressure Independent. . . . . . . . . . . . . . . 5-9 TA Series 7CP Compact Pressure Independent Balancing and Control Valve. . . . . . . . . . . . . . . . . . . 5-10 TA Series 7CP Accessories . . . . . . . . . . . . . . . . . . . . . . . 5-12 TA Series 7CT Control and Balancing Valve . . . . . . . . . . . 5-13 TA Series 7CT Accessories . . . . . . . . . . . . . . . . . . . . . . . 5-14 Series 76X ICSS – Low Lead Balancing Valve. . . . . . . . . . 5-15 Combined Balancing and Control Valves TA Series 7FC (FUS1ON C) . . . . . . . . . . . . . . . . . . . . . . . 5-16 TA Series 7FP (FUS1ON P). . . . . . . . . . . . . . . . . . . . . . . 5-18 KOIL-KIT™ Coil Packages. . . . . . . . . . . . . . . . . . . . . . . . . . . 5-20 Series 793 Differential Pressure Controller – Threaded . . . . . 5-21 TA Series 794 Differential Pressure Controller – Flanged. . . . 5-21 TA Series 793 Insulation Kits. . . . . . . . . . . . . . . . . . . . . . . . . 5-21 TA Differential Pressure Controller Accessories. . . . . . . . . . . 5-22 Series 736 TA Link Differential Pressure Sensor . . . . . . . . . . 5-23

VICTAULIC.COM PL2016-GENERAL-C


Table of Contents SECTION 11 – Pipe Preparation Tools Vic-Easy Roll Grooving Tools – Field Portable VE12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-2 VE26 S/C/SS/P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-3 VE26/VE46 Power Drive Kit. . . . . . . . . . . . . . . . . . . . . . . 11-3 VE46. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-3 VE226 B/S/M/C/BSS/MSS/P . . . . . . . . . . . . . . . . . . . . . . 11-4 VE226 Power Drive Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . 11-4 Vic-Easy Roll Grooving Tools – Field Fabrication VE106. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-5 VE206 Portable Roll Grooving Tool. . . . . . . . . . . . . . . . . . 11-6 VE272SFS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-7 VE270FSD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-9 VE416FS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-11 VE416FSD/417FSD . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-13 VE450FSD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-15 Vic-Easy Roll Grooving Tools – Shop Fabrication VE268. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-16 VE414MC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-18 VE460. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-20 VE872. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-22 Victaulic Fabrication Cell . . . . . . . . . . . . . . . . . . . . . . . . 11-23 Vic-Easy Tool Accessories VPD752. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-24 VAPS112 Pipe Stand. . . . . . . . . . . . . . . . . . . . . . . . . . . 11-24 VAPS224 Pipe Stand. . . . . . . . . . . . . . . . . . . . . . . . . . . 11-25 VAPS236 Pipe Stand. . . . . . . . . . . . . . . . . . . . . . . . . . . 11-25 VAPS1672 Pipe Stand. . . . . . . . . . . . . . . . . . . . . . . . . . 11-26 VE436MC Slide Conversion Kit . . . . . . . . . . . . . . . . . . . 11-26 Cut Grooving Tools VG28GD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-27 VG28GD-ABR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-28 VDG26GD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-28 VG824. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-29 VG824-ABR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-30 VG824DG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-31 VG828. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-32 VG412. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-33 Vic-Groover. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-34 Pipe Preparation Tool Accessories Power Mule. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-36 PT-100-A Go/No-Go Pipe Tape . . . . . . . . . . . . . . . . . . . 11-36 PT-102 AGS Go/No-Go Pipe Tape . . . . . . . . . . . . . . . . . 11-37 Swing Handle Wrench. . . . . . . . . . . . . . . . . . . . . . . . . . 11-37 Vic-Adjustable Cut Grooving Tools for PVC Plastic Pipe VPG26. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-38 VPG824. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-38 Hole Cutting Tools VHCT900 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-39 HCT908 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-39 Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-39 Vic-Tap II Hot Tap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-40

VICTAULIC.COM PL2016-GENERAL-C

TABLE OF CONTENTS

Universal Gauge Meter Conversion Kit. . . . . . . . . . . . . . . . . . 5-23 TA Series 734 SCOPEScope Balancing Instrument . . . . . . . . 5-24 SECTION 6 – Plain End Couplings and Fittings Style 99 Roust-A-Bout Coupling . . . . . . . . . . . . . . . . . . . . . . . 6-2 Gaskets for Style 99 Couplings . . . . . . . . . . . . . . . . . . . . . . . . 6-2 Plated Trackhead Bolts and Nuts . . . . . . . . . . . . . . . . . . . . . . 6-3 No(s). 40-P, 42-P and 43-P Adapter Nipples. . . . . . . . . . . . . . 6-3 Plain End Fittings – No. 10-P – 90° Elbow. . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4 No. 11-P – 45° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4 No. 20-P – Tee, No. 61-P Bull Plug. . . . . . . . . . . . . . . . . . 6-4 No. 33-P – Wye. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-5 No. 30-P – Lateral. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-5 No. 35-P – Cross. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-5 No. 53-P – Swaged Nipples. . . . . . . . . . . . . . . . . . . . . . . . 6-6 No. 25-P – Reducing Tee . . . . . . . . . . . . . . . . . . . . . . . . . 6-7 SECTION 7 – HDPE Products Style 995N HDPE Coupling. . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2 Style 905 Coupling for HDPE Pipe . . . . . . . . . . . . . . . . . . . . . 7-3 Style 907 Coupling for HDPE to Steel Pipe . . . . . . . . . . . . . . . 7-3 Style 994 HDPE Flange Adapter. . . . . . . . . . . . . . . . . . . . . . . 7-3 Style 997 HDPE-to-Steel Transition Coupl. . . . . . . . . . . . . . . . 7-4 SECTION 8 – Copper Connection Products Style 607 QuickVic™ Rigid Coupling for Copper. . . . . . . . . . . 8-2 No. 670 Installation-Ready 90° Elbow. . . . . . . . . . . . . . . . . . . 8-2 No. 610 90° Elbow. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2 No. 611 45° Elbow. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2 No. 620 Tee. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-3 No. 660 Cap. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-3 Reducers – No. 650 Concentric Reducer Groove x Groove. . . . . . . . . . 8-3 No. 652 Concentric Reducer Groove x Cup. . . . . . . . . . . . 8-3 No. 625 Reducing Tee Groove x Groove. . . . . . . . . . . . . . . 8-4 No. 626 Reducing Tee Groove x Cup. . . . . . . . . . . . . . . . . 8-4 Style 641 Vic-Flange Adapter . . . . . . . . . . . . . . . . . . . . . . . . . 8-5 Style 622 Copper Mechanical-T Bolted Branch Outlet. . . . . . . 8-6 Style 622 Copper Mechanical-T Cross. . . . . . . . . . . . . . . . . . . 8-6 Series 608N Copper Connection Butterfly Valve. . . . . . . . . . . 8-7 Carbon Steel or Stainless Steel (IPS) to Copper (CTS) Dielectric Transition Fittings Style 647-GT – Grooved x Threaded . . . . . . . . . . . . . . . . . 8-7 Style 647-TT – Threaded x Threaded. . . . . . . . . . . . . . . . . 8-7 Style 647-GG Grooved x Grooved. . . . . . . . . . . . . . . . . . . . 8-8 SECTION 9 – Aluminum Products Style 77A Aluminum Coupling. . . . . . . . . . . . . . . . . . . . . . . . . 9-2 Style 78A Aluminum Snap-Joint Coupling. . . . . . . . . . . . . . . . 9-2 Aluminum Fittings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-2 SECTION 10 – Large Diameter AGS Vic-Ring Products Large Diameter Piping Solutions. . . . . . . . . . . . . . . . . . . . . . 10-2 Vic-Ring Check Sheet for W07/W77/W89 AGS Couplings. . . 10-3 Style W07 AGS Rigid Coupling for AGS Vic-Ring System. . . . 10-4 Style W77 AGS Flexible Coupling for AGS Vic-Ring System. . 10-5

III


Table of Contents

TABLE OF CONTENTS

Pipe Cut-Off Tools VCT1 - Manual. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-41 VCT2 - Automatic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-41 Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-41 How to Order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-42 Terms and Conditions of Tool Rental. . . . . . . . . . . . . . . . . . 11-43 Terms and Conditions of Sale . . . . . . . . . . . . . . Inside Back Cover Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inside Back Cover Victaulic Sales and Service Centers. . . . . . . . . . . . . . . Back Cover

IV

VICTAULIC.COM PL2016-GENERAL-C


Gaskets Gasket Selection Guide

Gasket Selection Guide

Standard Gaskets

TEMP. RANGE*

GRADE

COMPOUND

IPS

E

–30°F to +230°F –34°C to +110°C

EPDM

–30°F to +250°F ‡ –34°C to +120°C

EPDM

T

–20°F to +180°F –29°C to +82°C

Nitrile

E2

Ambient

EPDM

EHP

Gasket Selection Guide

IMPORTANT PLEASE READ BEFORE ORDERING. Gasket selection must always be specified on your order.

COLOR CODE

GENERAL SERVICE GUIDELINES May be specified for hot water service within the specified temperature range plus a variety of dilute acids, oil-free air and many chemical Green services. UL Classified in accordance with ANSI/ Stripe NSF 61 for cold +73°F | +23°C and hot +180°F | +82°C potable water service and ANSI/NSF 372. NOT COMPATIBLE FOR USE WITH PETROLEUM SERVICES. May be specified for hot water service within the specified temperature range. UL Classified Red and in accordance with ANSI/NSF 61 for cold +73°F Green | +23°C and hot +180°F | +82°C potable water Stripes service and ANSI/NSF 372. NOT COMPATIBLE FOR USE WITH PETROLEUM SERVICES. May be specified for petroleum products, hydrocarbons, air with oil vapors, vegetable and mineral oils within the specified temperature Orange range. Stripe Not compatible for use with hot, dry air over +140°F | +60°C and water over +150°F | +66°C. NOT COMPATIBLE FOR USE WITH HOT WATER SERVICES. UL Classified in accordance with ANSI/NSF 61 Double for cold +73°F | +23°C and hot +180°F | +82°C Green potable water service and ANSI/NSF 72. Stripe NOT COMPATIBLE FOR USE WITH PETROLEUM SERVICES.

* For specific chemical and temperature compatibility, refer to the Gasket Selection Guide (05.01) which includes the Gasket Chemical Services Short Report or refer to the Gasket Chemical Services Guide Long Report (GSG-100) located on victaulic.com. The information shown defines general ranges for all compatible fluids. ‡ The Grade EHP gasket is only available on Style 107, 607 and 177 couplings

VICTAULIC.COM PL2016-GENERAL-C

V


Gaskets Special Gaskets

Gasket Selection Guide

IPS

TEMP. RANGE*

COMPOUND

–40°F to +160°F –40°C to +71°C

Epichlorohydrin

–30°F to +180°F –34°C to +82°C

Neoprene

O

+20°F to +300°F –7°C to +149°C

Fluoroelastomer

L

–30°F to +350°F –34°C to +177°C

Silicone

A

+20°F to +180°F –7°C to +82°C

White Nitrile

–20°F to +150°F –29°C to +66°C

Nitrile

EF

– 30°F to + 230°F –34°C to +110°C

EPDM

EW

– 30°F to + 230°F –34°C to +110°C

EPDM

GRADE

M2 V

HMT (T EndSeal™)

COLOR CODE

GENERAL SERVICE GUIDELINES Specially compounded to provide superior White service for common aromatic fuels at low Stripe temperatures. Also suitable for certain ambient temperature water services. May be specified for hot lubricating oils and Yellow certain chemicals. Good oxidation resistance. Will Stripe not support combustion. May be specified for many oxidizing acids, petroleum oils, halogenated hydrocarbons, Blue lubricants, hydraulic fluids, organic liquids and Stripe air with hydrocarbons. NOT COMPATIBLE FOR USE WITH HOT WATER SERVICES. May be specified for dry heat, air without Red hydrocarbons to +350°F | +177°C and certain Gasket chemical services. No carbon black content. May be used for food. Meets FDA requirements. Conforms to CFR Title 21 Part 177.2600. White Not compatible for use with hot, dry air over Gasket +140°F | +60°C and water over +150°F | +66°C. NOT COMPATIBLE FOR USE WITH HOT WATER SERVICES. Specially compounded with excellent oil resistance and a high modulus for resistance to extrusion. May be specified for petroleum products, air with oil vapors, vegetable and Orange mineral oils within the specified temperature and range. For maximum gasket life under pressure Silver extremes, the temperature should be limited to Stripes +120°F | +49°C. NOT COMPATIBLE FOR USE WITH hot water services over +150°F | +66°C or for hot, dry air over +140°F | +60°C. May be specified for hot and cold water service within the specified temperature range plus a variety of dilute acids, oil-free air and many chemical services. Also meets hot and cold potable water requirements per DVGW, Green KTW, ÖVGW, SVGW and French ACS (Crecep), “X” approved for W534, approved for EN681-1 Type WA cold potable and Type WB hot potable water service. NOT COMPATIBLE FOR USE WITH PETROLEUM SERVICES. May be specified for hot water service within the specified temperature range plus a variety of dilute acids, oil-free air and many chemical services. WRAS approved material to BS 6920 for Green cold and hot potable water service up to +149°F “W” | +65°C. UL Classified in accordance with ANSI/ NSF 61 for cold +73°F | +23°C and hot +180°F | +82°C potable water service and ANSI/NSF 372. NOT COMPATIBLE FOR USE WITH PETROLEUM SERVICES.

* For specific chemical and temperature compatibility, refer to the Gasket Selection Guide (05.01) which includes the Gasket Chemical Services Short Report or refer to the Gasket Chemical Services Guide Long Report (GSG-100) located on victaulic.com. The information shown defines general ranges for all compatible fluids.

VI

VICTAULIC.COM PL2016-GENERAL-C


Gaskets Special Gaskets

GRADE

TEMP. RANGE*

COMPOUND

COLOR CODE

AWWA COUPLING

–20°F to +180°F –29°C to +82°C

Nitrile

Orange Stripe

M

–20°F to +200°F –29°C to +93°C

Halogenated Butyl

Brown Stripe

Gasket Selection Guide

S

GENERAL SERVICE GUIDELINES Specially compounded to conform to ductile pipe surfaces. May be specified for petroleum products, air with oil vapors, vegetable and mineral oils within the specified temperature range. Not compatible for use with hot, dry air over +140°F | +60°C and water over +150°F | +66°C. NOT COMPATIBLE FOR USE WITH HOT WATER SERVICES. May be specified for water service within the specified temperature range plus a variety of dilute acids, oil-free air and many chemical services. Readily conforms to ductile iron pipe surfaces. UL Classified in accordance with ANSI/ NSF 61 for cold +86°F | +30°C potable water service and ANSI/NSF 372. NOT COMPATIBLE FOR USE WITH PETROLEUM SERVICES.

* For specific chemical and temperature compatibility, refer to the Gasket Selection Guide (05.01) which includes the Gasket Chemical Services Short Report or refer to the Gasket Chemical Services Guide Long Report (GSG-100) located on victaulic.com. The information shown defines general ranges for all compatible fluids.

Price List Request Form

VICTAULIC.COM PL2016-GENERAL-C

VII


SECTION 1 – Couplings and Fittings

Couplings and Fittings

VICTAULIC.COM PL2016-GENERAL-C

1-1


Grooved IPS Pipe Couplings Style 107H QuickVic™ Rigid Coupling for Steel

Grooved IPS Pipe Couplings QuickVic™ Rigid Coupling for Steel STYLE 107H

Refer to publication 06.21

SECTION 1 GROOVED IPS PIPE COUPLINGS

2 – 8” Style 107H

STYLE 107H – GRADE “EHP” OR “T” GASKET

PIPE Inches Nom. Size 2 2Z\x 3 4 5 6 8

Aprx. Wgt. Ea. Outside Dia. 2.375 2.875 3.500 4.500 5.563 6.625 8.625

Lbs 2.1 2.5 3.1 3.9 5.1 6.8 10.5

COUPLING COMPLETE † With Grade “EHP” or “T” Gasket Price Each Painted $88.00 123.50 132.00 167.00 238.00 284.50 427.50

Galv. $128.50 173.50 187.00 244.50 355.00 422.00 656.50

SPARE PARTS Grade “EHP” or “T” Gasket $69.50 72.00 90.00 114.00 134.50 141.00 203.50

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. † Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.

Style 107N QuickVic™ Rigid Coupling

QuickVic™ Rigid Coupling STYLE 107N

Refer to publication 06.23

2 – 8”

STYLE 107N – GRADE “EHP” OR “T” GASKET

Aprx. Wgt. Ea.

PIPE Inches Nom. Size 2 2Z\x 3 4 5 6 8 10 12

Outside Dia. 2.375 2.875 3.500 4.500 5.563 6.625 8.625 10.750 12.750

Lbs 2.7 3.0 3.7 5.1 7.0 8.2 15.1 23.6 27.2

COUPLING COMPLETE † With Grade “EHP” or “T” Gasket Price Each Price Each Painted $88.00 123.50 132.00 167.00 238.00 284.50 427.50 660.00 909.00

Galv. $128.50 173.50 187.00 244.50 355.00 422.00 656.50 1046.00 1373.50

SPARE PARTS Grade “EHP” or “T” Gasket $69.50 72.00 90.00 114.00 134.50 141.00 203.50 211.50 225.00

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. † Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.

10 – 12”

1-2

VICTAULIC.COM PL2016-GENERAL-C


Grooved IPS Pipe Couplings Style 07 Zero-Flex™ Rigid Coupling

Zero-Flex™ Rigid Coupling STYLE 07

(with Style 77 gasket) Refer to publication 06.02

STYLE 07 – GRADE “E” OR “T” GASKET OR FLUSH-SEAL™ GASKET

PIPE Inches Nom. Outside Size Dia. 1 1.315 1.660 1Z\v 1.900 1Z\x 2 2.375 2.875 2Z\x 3 3.500 4 4.500 5 5.563 6 6.625 8 8.625 10 10.750 12 12.750

Aprx. Wgt. Ea.

Lbs. 1.6 1.7 1.9 2.2 2.6 3.0 4.8 6.7 8.3 15.1 23.5 28.2

COUPLING COMPLETE † With Grade “E” or “T” Gasket Price Each Painted $80.50 80.50 85.50 107.00 151.50 158.50 205.50 289.50 348.00 525.00 852.50 1175.50

Galv. $109.50 113.50 113.50 158.50 213.50 227.50 300.00 428.50 516.00 744.50 1335.50 1753.50

COUPLING COMPLETE † with Flush-Seal “E” or “T” Gasket Price Each Painted $103.50 104.00 119.00 147.00 227.50 231.00 269.50 548.00 522.50 786.50 1296.00 1647.00

Galv. $135.00 140.50 154.00 197.50 299.50 314.50 373.00 728.00 716.00 1095.50 1871.50 2306.00

SPARE PARTS Plated Bolt & Nut Size § No. * Inches 2 2 C\, x 2 2 C\, x 2 2 C\, x 2 Z\x x 2Z\x 2 Z\x x 2C\v 2 Z\x x 2Z\x 2 Z\x x 2C\v 2 B\, x 3Z\v 2 B\, x 3Z\v 2 C\v x 4Z\v 2 M\, x 6Z\x 2 M\, x 6Z\x

* Number of bolts equals number of segments supplied. NOTE: Items listed in shaded areas are non-cancellable and non-returnable. † Surcharge for couplings supplied without gasket. Contact Victaulic for pricing. § Metric thread size bolts available. Contact Victaulic.

Style 07 Zero-Flex Rigid Coupling with Silicone Grade “L” Gasket or Fluoroelastomer Grade “O” Gasket

Zero-Flex™ Rigid Coupling STYLE 07

(with Style 77 gasket) Refer to publication 06.02

STYLE 07 – SILICONE GRADE “L” GASKET OR FLUOROELASTOMER GRADE “O” GASKET

PIPE Inches Nom. Outside Size Dia. 1 1.315 1.660 1Z\v 1.900 1Z\x 2 2.375 2.875 2Z\x 3 3.500 4 4.500 5 5.563 6 6.625 8 8.625 10 10.750 12 12.750

Aprx. Wgt. Ea.

Lbs. 1.6 1.7 1.9 2.2 2.6 3.0 5.3 6.7 8.3 15.1 23.5 28.2

COUPLING COMPLETE † With Silicone Grade “L” Gasket Price Each Painted $302.50 453.00 345.00 414.50 463.00 487.50 562.00 593.00 668.50 782.50 851.00 1070.00

Galv. $332.00 485.50 373.50 498.00 558.00 592.00 694.00 720.50 826.00 1038.00 1241.50 1531.50

COUPLING COMPLETE † With Fluoroelastomer Grade “O” Gasket Price Each Painted $359.00 535.00 421.00 562.00 684.00 820.50 1131.00 1402.50 1630.50 2702.50 3197.00 4423.50

Galv. $387.00 573.50 548.00 661.00 806.00 965.00 1470.00 1532.00 2042.50 4514.00 3587.50 4885.00

SPARE PARTS Plated Bolt & Nut Size § No. * Inches 2 2 C\, x 2 2 C\, x 2 2 C\, x 2 Z\x x 2Z\x 2 Z\x x 2C\v 2 Z\x x 2Z\x 2 Z\x x 2C\v 2 B\, x 3Z\v 2 B\, x 3Z\v 2 C\v x 4Z\v 2 M\, x 6Z\x 2 M\, x 6Z\x

SECTION 1 GROOVED IPS PIPE COUPLINGS

NOTE: See Spare Parts Section for spare part prices.

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. † Surcharge for couplings supplied without gasket. Contact Victaulic for pricing. § Metric thread size bolts available. Contact Victaulic. NOTE: See Spare Parts Section for spare part prices.

VICTAULIC.COM PL2016-GENERAL-C

1-3


Grooved IPS Pipe Couplings Style W07 AGS Rigid Coupling with Grade “E” Flush-Seal™ Gasket

Rigid Coupling

AGS STYLE W07 – GRADE “E” FLUSH-SEAL™ GASKET

AGS STYLE W07

PIPE Inches

Refer to publication 20.02

SECTION 1 GROOVED IPS PIPE COUPLINGS

14 – 24”

1-4

26 – 48”

Aprx. Wgt. Ea

Nom. Size 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48

Outside Dia. 14.000 16.000 18.000 20.000 22.000 24.000 26.000 28.000 30.000 32.000 34.000 36.000 38.000 40.000 42.000 44.000 46.000 48.000

Lbs. 48.9 60.8 71.2 81.7 116.0 116.2 205.0 220.0 227.0 242.0 255.0 268.0 340.0 340.0 360.0 390.0 415.0 425.0

COUPLING COMPLETE † With Flush-Seal Grade “E” Gasket Price Each Painted $859.00 1249.00 1392.50 1944.50 + 2126.50 + + + + + + + + + + + +

Galv. $1313.00 1836.00 2073.50 2765.50 + 3219.50 + + + + + + + + + + + +

SPARE PARTS Plated Bolt & Nut Size § No. Inches 2 1 x 5Z\x 2 1 x 5Z\x 2 1 x 5Z\x 2 1Z\, x 5Z\x 2 1Z\, x 5Z\x 2 1Z\, x 5Z\x 4 6 1C\, x 4 6 1C\, x 4 7 1Z\v x 4 7 1Z\v x 4 7 1Z\v x 4 7 1Z\v x 4 7 1Z\x x 4 7 1Z\x x 4 7 1Z\x x 4 7 1Z\x x 4 7 1Z\x x 4 7 1Z\x x

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability. † Surcharge for couplings supplied without gasket. Contact Victaulic for pricing. § Metric thread size bolts available. Contact Victaulic. NOTE: See Spare Parts Section for spare part prices.

VICTAULIC.COM PL2016-GENERAL-C


Grooved IPS Pipe Couplings Style W07 AGS Rigid Coupling with Grade “T” or Silicone Gasket

Rigid Coupling

AGS STYLE W07 – GRADE “T” OR “L” FLUSH-SEAL™ GASKET

AGS STYLE W07

PIPE Inches

Refer to publication 20.02

14 – 24”

Outside Dia. 14.000 16.000 18.000 20.000 22.000 24.000 26.000 28.000 30.000 32.000 34.000 36.000 38.000 40.000 42.000 44.000 46.000 48.000

Lbs 48.9 60.8 71.2 81.7 116.0 116.2 205.0 220.0 227.0 242.0 255.0 268.0 340.0 340.0 360.0 390.0 415.0 425.0

Painted $1015.50 1439.50 1782.00 2177.00 + 2374.50 + + + + + + + + + + + +

Galv. $1470.50 2028.00 2268.50 2274.00 + 3467.00 + + + + + + + + + + + +

SPARE PARTS Plated Bolt & Nut Size § No. Inches 2 1 x 5Z\x 2 1 x 5Z\x 2 1 x 5Z\x 2 1Z\, x 5Z\x 2 1Z\, x 5Z\x 2 1Z\, x 5Z\x 4 6 1C\, x 4 6 1C\, x 4 7 1Z\v x 4 7 1Z\v x 4 7 1Z\v x 4 7 1Z\v x 4 7 1Z\x x 4 7 1Z\x x 4 7 1Z\x x 4 7 1Z\x x 4 7 1Z\x x 4 7 1Z\x x

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability. † Surcharge for couplings supplied without gasket. Contact Victaulic for pricing. § Metric thread size bolts available. Contact Victaulic. NOTE: See Spare Parts Section for spare part prices.

Style 177 QuickVic Flexible Coupling for Steel

QuickVic™ Flexible Coupling for Steel STYLE 177

Refer to publication 06.20

STYLE 177 – GRADE “EHP” OR “T” GASKET

Aprx. Wgt. Ea.

PIPE Inches Nom. Size 2 2Z\x 3 4 5 6 8

Outside Dia. 2.375 2.875 3.500 4.500 5.563 6.625 8.625

Lbs 2.0 2.4 3.1 3.7 4.8 6.3 10.5

COUPLING COMPLETE † With Grade “EHP” or “T” Gasket Price Each Painted $89.00 116.50 124.50 205.00 345.50 350.50 519.00

Galv. $128.00 164.00 178.50 300.50 502.00 519.00 793.00

SPARE PARTS

SECTION 1 GROOVED IPS PIPE COUPLINGS

26 – 48”

Nom. Size 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48

COUPLING COMPLETE † With Flush-Seal Silicone Grade “T” or “L” Gasket Price Each

Aprx. Wgt. Ea.

Grade “EHP” or “T” Gasket $69.50 72.00 90.00 114.00 134.50 141.00 203.50

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. † Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.

VICTAULIC.COM PL2016-GENERAL-C

1-5


Grooved IPS Pipe Couplings Style 177N QuickVic Flexible Coupling for Steel

QuickVic™ Flexible Coupling for Steel STYLE 177N

Refer to publication 06.24

STYLE 177N – GRADE “EHP” OR “T” GASKET

Aprx. Wgt. Ea.

PIPE Inches Nom. Size 2 2Z\x 3 4 5 6 8

Outside Dia. 2.375 2.875 3.500 4.500 5.563 6.625 8.625

Lbs 3.3 3.8 4.3 7.4 4.8 12.8 15.5

COUPLING COMPLETE † With Grade “EHP” or “T” Gasket Price Each Painted $89.00 116.50 124.50 205.00 345.50 350.50 519.00

Galv. $128.00 164.00 178.50 300.50 502.00 519.00 793.00

SPARE PARTS Grade “EHP” or “T” Gasket $69.50 72.00 90.00 114.00 134.50 141.00 203.50

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. † Surcharge for couplings supplied without gasket. Contact Victaulic for pricing. NOTE: Available with stainless steel bolts and nuts. Contact Victaulic for pricing. NOTE: 5 and 8” are Style 177 coupling

SECTION 1 GROOVED IPS PIPE COUPLINGS

Style 77 Standard Flexible Coupling

1-6

VICTAULIC.COM PL2016-GENERAL-C


Grooved IPS Pipe Couplings Standard Coupling

STYLE 77 – GRADE “E” OR “T” GASKET OR FLUSH-SEAL™ GASKET

STYLE 77

Refer to publication 06.04

C\v – 12”

PIPE Inches Nom. Outside Size Dia. 1.050 C\v 1 1.315 1.660 1Z\v 1.900 1Z\x 2 2.375 2.875 2Z\x 3 3.500 4.000 3Z\x 4 4.500 5 5.563 6 8 10 12 28 I.D.** 30 I.D.**

6.625 8.625 10.750 12.750 35.500 37.880

Aprx. Wgt. Ea.

COUPLING COMPLETE † With Grade “E” or “T” Gasket Price Each

COUPLING COMPLETE † With Flush-Seal “E” or “T” Gasket Price Each

Lbs 1.1 1.2 2.0 2.1 2.6 3.1 3.7 5.6 6.7 10.5

Painted $63.50 65.50 80.50 89.50 89.00 116.50 124.50 201.00 205.00 345.50

Galv. $83.50 88.00 113.00 124.50 128.00 164.00 178.50 289.00 300.50 502.00

Painted $83.50 87.00 104.50 122.00 132.00 196.50 202.50 277.50 342.50 611.00

Galv. $108.00 113.00 139.00 162.00 180.00 255.00 269.50 365.00 396.50 814.00

12.0 20.8 31.1 27.8 95.0 127.2

350.50 519.00 709.50 956.00 + +

519.00 793.00 1101.50 1443.50 + +

543.50 805.50 1010.50 1231.50 + +

750.50 1136.50 1450.00 1803.00 + +

SPARE PARTS Plated Bolt & Nut Size § No.* Inches 2 2 C\, x 2 2 C\, x 2 Z\x x 2Z\x 2 Z\x x 2Z\x 2 Z\x x 2Z\x 2 Z\x x 2C\v 2 Z\x x 2C\v 2 B\, x 3Z\v 2 B\, x 3Z\v 2 C\v x 4Z\v 2 2 2 2 4 4

C\v M\, 1 1 1 1

x x x x x x

4Z\v 5 6 6Z\x 5Z\x 5Z\x SECTION 1 GROOVED IPS PIPE COUPLINGS

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. * Number of bolts equals number of segments supplied.

14 – 24”

+ Quoted on application. Contact Victaulic for pricing and availability. † Surcharge for couplings supplied without gasket. Contact Victaulic for pricing. § Metric thread size bolts available. Contact Victaulic. NOTE: See Spare Parts Section for spare part prices. NOTE: 14 – 72” standard for this size range is the W77 AGS flexible coupling. ** Requires Vic-Ring for assembly.

Standard Coupling STYLE 77 FOR CUT GROOVE SYSTEMS ONLY

Refer to publication 06.04

STYLE 77 – GRADE “E” GASKET OR FLUSH-SEAL™ GASKET

PIPE Inches Nom. Outside Size Dia. 14 ‡ 14.000 16 ‡ 16.000 18 ‡ 18.000 20 ‡ 20.000 22 ‡ 22.000 24 ‡ 24.000

Aprx. Wgt. Ea.

Lbs 39.2 45.0 64.1 74.8 82.6 89.6

COUPLING COMPLETE † With Grade “E” Price Each Painted 1385.50 1738.50 2097.00 2811.50 2893.00 2948.50

Galv. 1756.00 2270.00 2766.50 3761.50 3957.50 3926.00

COUPLING COMPLETE † With Flush-Seal “E” Price Each Painted 1751.50 2132.00 2572.00 3392.50 – 3593.50

Galv. 2121.00 2664.00 3242.00 4340.00 – 4570.50

SPARE PARTS Plated Bolt & Nut Size § No.* Inches 2 1 x 3Z\x 2 1 x 3Z\x 2 1Z\, x 4 2 1Z\, x 4 2 1Z\, x 4 2 1Z\, x 4

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. * Number of bolts equals number of segments supplied. § Metric thread size bolts available. Contact Victaulic. † Surcharge for couplings supplied without gasket. Contact Victaulic for pricing. NOTE: See Spare Parts Section for spare part prices. NOTE: 14 – 72” standard for this size range is the W77 AGS flexible coupling. For roll groove systems please see AGS Style W77. NOTE: Prices shown for 14 – 24” are for couplings with grade E gasket. For couplings with grade T gaskets contact Victaulic for pricing.

VICTAULIC.COM PL2016-GENERAL-C

1-7


Grooved IPS Pipe Couplings Style 77 Standard Flexible Coupling with Silicone Grade “L” Gasket or Fluoroelastomer Grade “O” Gasket

Standard Coupling

STYLE 77 – SILICONE GRADE “L” GASKET OR FLUOROELASTOMER GRADE “O” GASKET

STYLE 77

Refer to publication 06.04

PIPE Inches Nom. Outside Size Dia. 1.050 C\v 1 1.315 1.660 1Z\v 1.900 1Z\x 2 2.375 2.875 2Z\x 3 3.500 4.000 3Z\x 4 4.500 5 5.563 6 6.625 8 8.625 10 10.750 12 12.750

Aprx. Wgt. Ea.

Lbs 1.1 1.2 2.0 2.1 2.6 3.1 3.7 5.6 6.7 10.5 12.0 20.8 31.1 27.8

COUPLING COMPLETE † With Silicone Grade “L” Gasket Price Each Painted $272.00 272.00 314.50 333.50 359.00 393.50 417.50 521.50 529.50 643.00 663.50 798.50 911.00 1139.50

Galv. $293.00 294.00 346.00 368.00 432.50 444.50 510.00 607.00 667.00 809.00 874.00 1090.50 1301.50 1626.00

COUPLING COMPLETE † With Fluoroelastomer Grade “O” Gasket Price Each Painted $333.50 333.50 393.00 412.00 482.50 580.00 698.00 1039.50 1011.00 1329.00 1475.00 2419.00 3070.50 4226.50

Galv. $354.50 387.00 425.00 446.50 569.50 630.50 823.00 1128.00 1208.50 1495.50 1786.50 2933.50 3463.00 4714.50

SPARE PARTS Plated Bolt & Nut Size § No.* Inches 2 2 C\, x 2 2 C\, x 2 2 C\, x 2 Z\x x 2Z\x 2 Z\x x 2Z\x 2 Z\x x 2C\v 2 Z\x x 2C\v 2 B\, x 3Z\v 2 B\, x 3Z\v 2 C\v x 4Z\v 2 C\v x 4Z\v 2 5 M\, x 2 1 x 6 2 1 x 6Z\x

* Number of bolts equals number of segments supplied.

SECTION 1 GROOVED IPS PIPE COUPLINGS

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

1-8

† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing. § Metric thread size bolts available. Contact Victaulic. NOTE: See Spare Parts Section for spare part prices.

VICTAULIC.COM PL2016-GENERAL-C


Grooved IPS Pipe Couplings Style W77 AGS Flexible Coupling with Grade “E” Flush-Seal™ Gasket

Flexible Coupling

AGS STYLE W77 – GRADE “E” FLUSH-SEAL™ GASKET

AGS STYLE W77

PIPE Inches

Refer to publication 20.03

14 – 24”

Nom. Size 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 54 56 60 62 72

Outside Dia. 14.000 16.000 18.000 20.000 22.000 24.000 26.000 28.000 30.000 32.000 34.000 36.000 38.000 40.000 42.000 44.000 46.000 48.000 54.000 56.000 60.000 62.000 72.000

Lbs 47.5 57.8 65.0 82.3 107.0 106.8 205.0 220.0 227.0 242.0 255.0 268.0 340.0 340.0 360.0 390.0 415.0 425.0 648.0 676.0 720.0 956.0 1140.0

COUPLING COMPLETE † With Flush-Seal Grade “E” Gasket Price Each Painted $1007.00 1312.50 1461.50 2042.00 + 2232.50 + + + + + + + + + + + + + + + + +

Galv. $1470.00 1887.50 2106.00 2880.50 + 3270.50 + + + + + + + + + + + + + + + + +

SPARE PARTS Plated Bolt & Nut Size § No. * Inches 2 1 x 5Z\x 2 1 x 5Z\x 2 1 x 5Z\x 2 1Z\, x 5Z\x 2 1Z\, x 5Z\x 2 1Z\, x 5Z\x 4 6 1Z\, x 4 6 1Z\, x 4 7 1Z\v x 4 7 1Z\v x 4 7 1Z\v x 4 7 1Z\v x 4 7 1Z\x x 4 7 1Z\x x 4 7 1Z\x x 4 7 1Z\x x 4 7 1Z\x x 4 7 1Z\x x 4 7 1Z\x x 4 7 1Z\x x 4 7 1Z\x x 4 7 1Z\x x 4 1Z\x x 7Z\x

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability. † Surcharge for couplings supplied without gasket. Contact Victaulic for pricing. § Metric thread size bolts available. Contact Victaulic. NOTE: See Spare Parts Section for spare part prices.

VICTAULIC.COM PL2016-GENERAL-C

SECTION 1 GROOVED IPS PIPE COUPLINGS

26 – 60”

Aprx. Wgt. Ea.

1-9


Grooved IPS Pipe Couplings Style W77 AGS Flexible Coupling with Grade “T” or “L” Flush-Seal™ Gasket

Flexible Coupling

AGS STYLE W77 – GRADE “T” OR “L” FLUSH-SEAL™ GASKET

AGS STYLE W77

PIPE Inches

Refer to publication 20.03

SECTION 1 GROOVED IPS PIPE COUPLINGS

14 – 24”

1-10

26 – 60”

Aprx. Wgt. Ea.

Nom. Size 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 54 56 60 62 72

Outside Dia. 14.000 16.000 18.000 20.000 22.000 24.000 26.000 28.000 30.000 32.000 34.000 36.000 38.000 40.000 42.000 44.000 46.000 48.000 54.000 56.000 60.000 62.000 72.000

Lbs 47.5 57.8 65.0 82.3 107.0 106.8 205.0 220.0 227.0 242.0 255.0 268.0 340.0 340.0 360.0 390.0 415.0 425.0 648.0 676.0 720.0 956.0 1140.0

COUPLING COMPLETE † With Flush-Seal Silicone Grade “T” or “L” Gasket Price Each Painted $1163.50 1503.50 1656.00 2275.50 + 2482.50 + + + + + + + + + + + + + + + + +

Galv. $1699.50 2170.50 2403.00 3253.50 + 3678.50 + + + + + + + + + + + + + + + + +

SPARE PARTS Plated Bolt & Nut Size § No. Inches 2 1 x 5Z\x 2 1 x 5Z\x 2 1 x 5Z\x 2 1Z\, x 5Z\x 2 1Z\, x 5Z\x 2 1Z\, x 5Z\x 4 6 1Z\, x 4 6 1Z\, x 4 7 1Z\v x 4 7 1Z\v x 4 7 1Z\v x 4 7 1Z\v x 4 7 1Z\x x 4 7 1Z\x x 4 7 1Z\x x 4 7 1Z\x x 4 7 1Z\x x 4 7 1Z\x x 4 7 1Z\x x 4 7 1Z\x x 4 7 1Z\x x 4 7 1Z\x x 4 1Z\x x 7Z\x

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability. † Surcharge for couplings supplied without gasket. Contact Victaulic for pricing. § Metric thread size bolts available. Contact Victaulic. NOTE: See Spare Parts Section for spare part prices.

VICTAULIC.COM PL2016-GENERAL-C


Grooved IPS Pipe Couplings Style 75 Flexible Coupling

Flexible Coupling

STYLE 75 – GRADE “E” OR “T” GASKET OR FLUSH-SEAL™ GASKET

STYLE 75

Refer to publication 06.05

Aprx. Wgt. Ea.

PIPE

Nom. Size 1 1Z\v 1Z\x 2 2Z\x 3 3Z\x 4 5 6 8

Inches Outside Dia. 1.315 1.660 1.900 2.375 2.875 3.500 4.000 4.500 5.563 6.625 8.625

Lbs 1.3 1.4 1.5 1.8 1.9 2.9 2.9 4.1 5.8 7.0 12.9

COUPLING COMPLETE † With Grade “E” or “T” Gasket

COUPLING COMPLETE † With Flush-Seal “E” or “T” Gasket

Price Each

Price Each

Painted $54.50 56.50 71.50 90.00 117.50 125.50 180.00 209.00 350.50 355.50 526.50

Galv. $79.50 80.50 95.00 129.50 166.50 180.50 239.00 304.50 509.00 526.50 804.00

Painted $125.50 129.50 157.00 173.50 225.00 180.50 254.50 281.00 426.00 410.00 615.50

Galv. $158.00 161.50 189.00 205.00 268.50 228.00 313.00 426.50 533.00 528.00 809.50

SPARE PARTS Plated Bolt & Nut Size § Inches 2 C\, x 2 C\, x 2 C\, x 2 C\, x 2 C\, x Z\x x 2C\v Z\x x 2C\v Z\x x 2C\v B\, x 3Z\v B\, x 3Z\v C\v x 4Z\v

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability. † Surcharge for couplings supplied without gasket. Contact Victaulic for pricing. § Metric thread size bolts available. Contact Victaulic. NOTE: See Spare Parts Section for spare part prices.

Flexible Coupling

STYLE 75 – SILICONE GRADE “L” GASKET

Aprx. Wgt. Ea.

PIPE

STYLE 75

Refer to publication 06.05

COUPLING COMPLETE † With Silicone Grade “L” Gasket

Inches Nom. Size 1 1Z\v 1Z\x 2 2Z\x 3 3Z\x 4 5 6 8

Price Each Outside Dia. 1.315 1.660 1.900 2.375 2.875 3.500 4.000 4.500 5.563 6.625 8.625

Lbs 1.3 1.4 1.5 1.7 1.9 2.9 2.9 4.1 5.8 7.0 12.9

Painted $266.00 305.50 319.00 341.50 379.00 399.00 + 459.50 471.50 535.00 614.50

Galv. $292.00 327.00 340.50 399.50 438.50 473.50 + 556.50 547.50 628.50 775.50

SPARE PARTS Plated Bolt & Nut Size § Inches 2 C\, x 2 C\, x 2 C\, x 2 C\, x 2 C\, x Z\x x 2C\v Z\x x 2C\v Z\x x 2C\v B\, x 3Z\v B\, x 3Z\v C\v x 4Z\v

SECTION 1 GROOVED IPS PIPE COUPLINGS

Style 75 Flexible Coupling with Silicone Gasket

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability. † Surcharge for couplings supplied without gasket. Contact Victaulic for pricing. § Metric thread size bolts available. Contact Victaulic. NOTE: See Spare Parts Section for spare part prices.

VICTAULIC.COM PL2016-GENERAL-C

1-11


Grooved IPS Pipe Couplings Style 750 Reducing Coupling

Reducing Coupling

STYLE 750 – GRADE “E” OR “T” GASKET

Refer to publication 06.08

Aprx Wgt. Ea.

PIPE

STYLE 750

COUPLING COMPLETE † With Grade “E” or “T” Gasket

Nominal Size

2

Price Each

Inches x 1

2Z\x 3

x x

1Z\x 2 2

4

x

2Z\x 2

5 6

x x

8 10

x x

Lbs 2.0 2.0 2.9 4.6 4.1 8.8 8.3 6.4 10.8 16.1 12.6 22.3 32.0

2Z\x 3 4 4 5 6 8

Painted $132.50 141.00 179.50 211.50 205.00 317.50 303.50 255.00 369.50 501.50 471.50 710.00 868.50

Galv. $170.50 182.50 235.00 291.50 279.00 443.00 432.50 355.50 527.00 739.00 663.00 1026.00 1508.00

SPARE PARTS Plated Bolt & Nut Size § Inches 2 C\, x x 2 C\, 2 C\, x Z\x x 2C\v Z\x x 2C\v B\, x 3Z\v B\, x 3Z\v B\, x 3Z\v C\v x 4Z\v C\v x 4Z\v C\v x 4Z\v 5 M\, x 1 x 6

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. † Surcharge for couplings supplied without gasket. Contact Victaulic for pricing. § Metric thread size bolts available. Contact Victaulic.

SECTION 1 GROOVED IPS PIPE COUPLINGS

Support rings required on vertical installations. Please specify on order.

1-12

A steel assembly washer is optionally available to prevent pipe from telescoping on vertical installations. No extra charge when specified on order with coupling. NOTE: See Spare Parts Section for spare part prices.

Style 741 Vic-Flange® Adapter

Vic-Flange Adapters

STYLE 741 – GRADE “E” OR “T” GASKET

STYLE 741

Grooved Pipe Adapters to ANSI Class 125 and 150 Flanges. Refer to publication 06.06

Aprx. Wgt. Ea.

PIPE Inches Nom. Size

Outside Dia.

2 2Z\x 3 4 5 6 8 10 12

2.375 2.875 3.500 4.500 5.563 6.625 8.625 10.750 12.750

Lbs STYLE 741 – Hinged 3.1 4.8 5.3 7.4 8.6 9.9 16.2 24.2 46.8

COUPLING COMPLETE † With Grade “E” or “T” Gasket Price Each Painted Galv. $301.00 356.00 384.00 537.50 631.00 753.00 864.50 1282.00 1744.50

$368.00 447.00 483.50 679.50 799.50 954.00 1132.50 1671.50 2405.50

VICTAULIC.COM PL2016-GENERAL-C


Grooved IPS Pipe Couplings Style W741 AGS Vic-Flange Adapter

Vic-Flange Adapters STYLE W741

Grooved Pipe Adapters to ANSI Class 125 and 150 Flanges. Refer to publication 20.04

STYLE W741 – GRADE “E”, “T” OR “L” GASKET

PIPE Inches Nom. Size Outside Dia. 14 14.000 16 16.000 18 18.000 20 20.000 24 24.000

Aprx. Wgt. Ea. Lbs 70.0 88.0 101.0 115.0 160.0

COUPLING COMPLETE † With Grade “E” or “T” Gasket Price Each Painted Galv. $3453.50 $4353.00 4006.00 5448.50 4931.00 5836.00 5933.50 6580.50 7592.00 9793.00

COUPLING COMPLETE † With Grade “L” Gasket Price Each Painted Galv. $3769.50 $4668.50 4345.50 5789.00 5268.50 6171.50 6227.50 6875.00 7869.50 10071.50

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. † Surcharge for couplings supplied without gasket. Contact Victaulic for pricing. The AGS Vic-Flange adapters utilize standard ANSI 125/150 flange bolts (supplied by installer). Bolt hole pattern is standard for ANSI CL. 150 and 125 CL. flanges.

Style 743 Vic-Flange Adapter

Vic-Flange Grooved Flange Adapters § STYLE 743

PIPE Inches Nominal Size Outside Diameter 2 2.375 2.875 2Z\x 3 3.500 4 4.500 5 5.563 6 6.625 8 8.625 10 10.750 12 12.750

Aprx. Wgt. Ea. Lbs 4.8 7.4 9.1 15.3 17.7 23.4 34.3 48.3 70.5

COUPLING COMPLETE † With Grade “E” or “T” Gasket Price Each Painted Galv. $517.50 $640.50 522.50 661.00 587.00 753.50 733.00 998.50 895.00 1205.50 1059.00 1431.00 1401.00 1955.50 2116.00 2925.00 3148.50 4406.50

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. § Utilizes standard ANSI 300 flange bolts (supplied by installer). Bolt hole pattern is standard for ANSI class 300 flanges.

SECTION 1 GROOVED IPS PIPE COUPLINGS

Grooved Pipe Adapters to ANSI Class 300 Flanges (with Style 741 gasket) Refer to publication 06.06

STYLE 743 – GRADE “E” OR “T” GASKET

† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing. NOTE: See Spare Parts Section for spare part prices.

VICTAULIC.COM PL2016-GENERAL-C

1-13


Grooved IPS Pipe Couplings Vic-Flange Adapter Notes

Victaulic flange adapters require a smooth, hard surface at the mating flange face for effective sealing. Some applications, for which the Victaulic flange adapter is otherwise well suited, do not provide an adequate mating surface. In such cases, it is recommended that a metal flange washer be inserted between the Victaulic flange adapter and the mating flange to provide the necessary sealing surface. See Spare Parts Section for flange washer prices. Typical applications where a Victaulic flange washer should be used are: 1.When mating to a serrated flange: a flange gasket should be used adjacent to the serrated flange. The flange washer is then inserted between the Victaulic flange adapter and the flange gasket. 2.When mating to a wafer valve: where typical valves are rubber lined and partially rubber faced (smooth or not), the flange washer is placed between the valve and the Victaulic flange adapter.

SECTION 1 GROOVED IPS PIPE COUPLINGS

3.When mating to a rubber faced flange: the flange washer is placed between the Victaulic flange adapters and the rubber faced flange. 4.When mating C.I. flanges to IPS flanges: the flange washer is placed between two Victaulic flange adapters. If one flange is not a Victaulic flange adapter (e.g., a flanged valve), then a flanged gasket must be placed adjacent to that flange and the flange washer must be inserted between the flange gasket and the Victaulic flange adapter. 5.When mating to components (valves, strainers, etc.) where the component flange face has an insert: follow the same arrangement as in # 1 above. Flange Washers – Styles 741, W741, 743

Flange Washers FOR STYLES 741, W741, 743 VIC-FLANGE ADAPTERS

FOR STYLES 741, W741, 743 VIC-FLANGE WASHERS

Flange Size Inches 2 2Z\x 3 4 5 6 8 10 12 14 * 16 * 18 * 20 * 24 *

FLANGE WASHERS Style 741 ANSI Plated $278.50 295.00 310.50 331.50 349.00 364.50 388.00 458.00 552.50 626.00 709.50 795.50 + +

Style 743 + + + + + + + + + – – – – –

* Flange gaskets supplied for Style W741 AGS Flange NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability.

1-14

VICTAULIC.COM PL2016-GENERAL-C


Grooved IPS Pipe Couplings Style 72 Outlet Coupling

Outlet Coupling STYLE 72

STYLE 72 – GRADE “E” OR “T” GASKET

Nominal Size

Refer to publication 06.10 Inches Run x Branch 1Z\x x Z\x C\v 1 2

x

Z\x C\v 1

2Z\x

x

Z\x C\v 1

3

4

x

x

1Z\v 1Z\x C\v 1 1Z\x 2 1 1Z\x 2

SPARE PARTS Plated Bolt & Nut Size § Inches 2 C\, x 2 C\, x 2 C\, x 2 C\, x 2 C\, x 2 C\, x Z\x x 2C\v Z\x x 2C\v Z\x x 2C\v B\, x 3Z\v B\, x 3Z\v Z\x x 2C\v B\, x 3Z\v B\, x 3Z\v B\, x 3Z\v Z\x x 2C\v Z\x x 2C\v B\, x 3Z\v B\, x 3Z\v C\v x 4Z\v C\v x 4Z\v C\v x 4Z\v

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. † Surcharge for couplings supplied without gasket. Contact Victaulic for pricing. § Metric thread size bolts available. Contact Victaulic. NOTE: See Spare Parts Section for spare part prices. Style 72 Outlet Couplings supplied with painted housing, Grade “E” or “T” gasket with plated neck insert and plated bolts and nuts.

SECTION 1 GROOVED IPS PIPE COUPLINGS

6

x

1Z\v 1Z\x C\v 1

OUTLET COUPLING COMPLETE † with Grade “E” or “T” Gasket NPT Female Thd. Branch Price Each Aprx Wgt. Ea. Lbs Painted Galv. 1.4 $251.00 $294.50 2.8 251.00 308.00 2.8 251.00 308.00 3.5 339.00 415.50 2.5 339.00 404.50 3.2 339.00 409.50 4.5 353.00 440.50 4.6 353.00 442.50 6.0 353.00 456.00 5.0 526.50 639.50 5.0 526.50 639.50 4.5 335.50 419.50 8.9 335.50 464.00 8.5 559.00 712.00 8.5 559.00 712.00 6.3 510.50 635.00 6.5 510.50 635.00 11.6 611.00 798.00 14.6 611.00 828.50 19.3 928.50 1231.50 19.3 928.50 1231.50 19.5 928.50 1234.50

When used on 2 – 3Z\x”/60.3 – 88.9 mm Victaulic cast fittings, contact Victaulic for recommendations. # Sizes noted above are suitable for assembly onto grooved pipe only. For assembly onto Victaulic cast fittings, specially machined Style 72 couplings must be ordered.

VICTAULIC.COM PL2016-GENERAL-C

1-15


Grooved IPS Pipe Couplings Style 791 and 792 Vic-Boltless® Coupling

Vic-Boltless Coupling * STYLES 791 COUPLING AND 792 ASSEMBLY TOOL

Refer to publication 06.11

STYLE 791 COUPLING – GRADE “E” OR “T” GASKET OR FLUSH-SEAL™ GASKET

Aprx. Wgt. Ea.

PIPE Inches Nom. Size Outside Dia. 2 2.375 2.875 2Z\x 3 3.500 4 4.500 6 6.625 8 8.625

Lbs 1.8 2.7 2.6 4.8 6.3 12.0

COUPLING COMPLETE † With Grade “E” or “T” Gasket Price Each Painted Galv. + + + + + + + + + + + +

COUPLING COMPLETE † With Flush-Seal “E” or “T” Gasket Price Each Painted Galv. + + + + + + + + + + + +

Extra Locking Pins available in color coded strips of 10 pins (see below). NOTE: Items listed in shaded areas are non-cancellable and non-returnable. * Coupling complete includes one-piece hinged housing, gasket (specify choice on order) and locking pin only. Assembly Tool required for assembly (purchased separately). + Quoted on application. Contact Victaulic for pricing and availability. † Surcharge for couplings supplied without gasket. Contact Victaulic for pricing. NOTE: See Spare Parts Section for spare part prices. STYLE 791 COUPLING – SILICONE GRADE “L” GASKET OR FLUOROELASTOMER GRADE “O” GASKET

Aprx. Wgt. Ea.

SECTION 1 GROOVED IPS PIPE COUPLINGS

PIPE Inches Nom. Size Outside Dia. 2 2.375 2.875 2Z\x 3 3.500 4 4.500 6 6.625 8 8.625

Lbs 1.8 2.7 2.6 4.8 6.3 12.0

COUPLING COMPLETE † With Silicone Grade “L” Gasket Price Each Painted Galv. + + + + + + + + + + + +

COUPLING COMPLETE † With Fluoroelastomer “O” or “T” Gasket Price Each Painted Galv. + + + + + + + + + + + +

Extra Locking Pins available in color coded strips of 10 pins (see below). NOTE: Items listed in shaded areas are non-cancellable and non-returnable. * Coupling complete includes one-piece hinged housing, gasket (specify choice on order) and locking pin only. Assembly Tool required for assembly (purchased separately). + Quoted on application. Contact Victaulic for pricing and availability. † Surcharge for couplings supplied without gasket. Contact Victaulic for pricing. NOTE: See Spare Parts Section for spare part prices. STYLE 792 REMOVABLE ASSEMBLY TOOL

Size One size fits all sizes Style 791 Couplings

Price Each +

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability.

Style 791 Locking Pins

Locking Pins STYLE 791

Victaulic locking pins must be used to assemble Style 791 couplings. Use of other objects are strictly prohibited.

STYLE 791

Nom. Pipe Size 2 2Z\x 3 4 6 8

B\zn C\, C\, M\zn Z\x Z\x

x x x x x x

SPARE PARTS Locking Pin 2 + 2 + 2 + 2Z\, + 2C\zn + 2M\zn +

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability.

1-16

VICTAULIC.COM PL2016-GENERAL-C


Grooved IPS Pipe Couplings Style 78 Snap-Joint™ Coupling

Snap-Joint™ Coupling STYLE 78

(with Style 77 gasket) Refer to publication 06.09

STYLE 78 – GRADE “E” OR “T” GASKET OR FLUSH-SEAL™ GASKET

PIPE Inches Nom. Size Outside Dia. 1 (a) 1.315 1Z\v (a) 1.660 1Z\x (a) 1.900 2 (c) 2.375 2Z\x (c) 2.875 3 (c) 3.500 4 (c) 4.500 5 (c) 5.563 6 (c) 6.625 8 (c) 8.625

COUPLING COMPLETE † With Grade “E” or “T” Gasket Price Each Painted Galv. $164.50 $192.00 210.50 251.00 201.50 246.00 203.00 245.50 254.50 316.50 244.50 316.50 355.00 451.00 704.50 905.50 755.00 982.50 1146.00 1466.00

Aprx. Wgt. Ea. Lbs 0.8 1.1 1.7 1.7 2.5 2.8 5.5 9.8 10.7 15.3

COUPLING COMPLETE With Flush-Seal Grade “E” or “T” Gasket † Price Each Painted Galv. $187.00 $212.50 245.50 285.00 234.00 276.50 241.00 292.00 330.00 389.00 316.50 378.00 419.50 515.00 938.00 1145.50 919.50 1125.50 1390.00 1466.00

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. † Surcharge for couplings supplied without gasket. Contact Victaulic for pricing. (a) Available with steel toggle locking assembly only. (c) Available with cast handle only. NOTE: See Spare Parts Section for spare part prices.

Style HP-70 Rigid Coupling

Rigid Coupling

STYLE HP-70 – GRADE “E” OR “T” GASKET

COUPLING COMPLETE † with “E” or “T” Gasket

Inches Nom. Size 2 2Z\x 3 4 6 8 10 12 14 16

Price Each Outside Dia. 2.375 2.875 3.500 4.500 6.625 8.625 10.750 12.750 14.000 16.000

Lbs 3.2 4.0 4.4 7.5 16.0 26.3 32.8 42.1 64.0 72.0

Painted $173.50 197.50 198.50 307.50 603.00 888.00 1481.00 1733.50 2299.00 2691.50

Galv. $232.50 310.00 276.00 430.50 808.00 1356.00 2786.00 3311.50 4618.50 5299.00

SPARE PARTS Plated Bolt & Nut Size § Inches B\, x 2C\v B\, x 3Z\x B\, x 3Z\x C\v x 4Z\v M\, x 5Z\x 1 x 5Z\x 1 x 6Z\x 1 x 6Z\x 1Z\v x 4Z\x 1Z\v x 4Z\x

SECTION 1 GROOVED IPS PIPE COUPLINGS

(with Style 77 Gasket) Refer to publication 06.12

Aprx. Wgt. Ea.

PIPE

STYLE HP-70

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. † Surcharge for couplings supplied without gasket. Contact Victaulic for pricing. § Metric thread size bolts available. Contact Victaulic. NOTE: See Spare Parts Section for spare part prices.

VICTAULIC.COM PL2016-GENERAL-C

1-17


Grooved IPS Pipe Couplings Style HP-70ES Coupling with “ES” Gasket

EndSeal™ Coupling STYLE HP-70ES

With “ES” Gasket Refer to publication 06.13

STYLE HP-70ES – “ES” GASKET

PIPE Inches Nom. Size Outside Dia. 2 2.375 2Z\x 2.875 3 3.500 4 4.500 6 6.625 8 8.625 10 10.750 12 12.750

Aprx. Wgt. Ea.

COUPLING COMPLETE † With “ES” Gasket Price Each Painted Galv. $229.00 $284.50 244.50 310.00 255.00 327.00 372.00 458.00 653.50 808.00 998.50 1356.00 1818.00 2786.00 2355.50 3311.50

Lbs 3.2 4.0 4.6 8.2 16.4 26.0 37.2 42.0

“ES” Gasket Only

Plated Bolt & Nut

Price Each $116.00 117.50 132.00 164.00 182.00 305.50 645.50 1088.00

Size § Inches B\, x 2C\v B\, x 3Z\x B\, x 3Z\x C\v x 4Z\v M\, x 5Z\x 1 x 5Z\x 1 x 6Z\x 1 x 6Z\x

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. † Surcharge for couplings supplied without gasket. Contact Victaulic for pricing. § Metric thread size bolts available. Contact Victaulic. NOTE: See Spare Parts Section for spare part prices. For use with cement-lined and plastic-coated pipe where protection at pipe ends is desired. When EndSeal Couplings (Style HP-70ES) are used, special pipe grooving dimensions are required. See publication 25.02 for details. Fittings for use with EndSeal Couplings are of special dimensions and should be specified as “EndSeal Fittings” when ordering.

SECTION 1 GROOVED IPS PIPE COUPLINGS

Style 307 Transition Coupling

Transition Coupling (AWWA to IPS)

STYLE 307 – GRADE “M” OR “S” FLUSH-SEAL™ GASKET

PIPE Inches Mating Pipe O.D.

STYLE 307

Refer to publication 23.03

Nom. Size 3 4 6 8 10 12

IPS Steel 3.500 4.500 6.625 8.625 10.750 12.750

Aprx. Wgt. Ea.

AWWA Ductile 3.960 4.800 6.900 9.050 11.100 13.200

Lbs 6.0 8.0 9.0 18.0 22.0 31.1

COUPLING COMPLETE † With Grade “M” or “S” Flush-Seal Gasket Price Each

Painted $479.00 551.00 669.00 836.00 1072.00 1428.50

Galv. $605.50 707.00 851.50 1136.00 1447.00 1945.50

SPARE Grade “M” or “S” Flush-Seal Gasket Only Price Ea. $349.00 311.50 331.00 376.50 654.00 681.00

PARTS

Bolt Z\x Z\x B\, C\v M\, M\,

& x x x x x x

Nut 2C\v 3Z\v 3Z\v 5 6Z\x 6Z\x

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. † Surcharge for couplings supplied without gasket. Contact Victaulic for pricing. NOTE: See Spare Parts Section for spare part prices.

1-18

VICTAULIC.COM PL2016-GENERAL-C


Grooved IPS Pipe Couplings Style 171 Composite Flexible Coupling

Composite Flexible Coupling

STYLE 171 – GRADE “E2” EPDM GASKET

PIPE

STYLE 171

Refer to publication 06.22.

Nom. Size 1Z\x 2 2Z\x 3 4

Aprx. Wgt. Ea.

COUPLING COMPLETE † With Grade “E2” EPDM Gasket

SPARE PARTS

Lbs 0.8 0.9 1.0 1.6 1.6

Price Each + + + + +

“E2” EPDM Gasket + + + + +

Outside Dia. 1.900 2.375 2.875 3.500 4.500

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. † Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.

Style 808 Coupling for Double Groove Pipe

Coupling for Double Groove Pipe

STYLE 808 – GRADE “T” GASKET

PIPE Inches

STYLE 808

Refer to publication 15.01

Lbs 36.0 70.0 85.0 105.0

Painted $1988.00 4034.00 6128.50 +

Outside Dia. 6.625 8.625 10.750 12.750

SPARE PARTS Plated Bolt Grade “E” or & Nut Size § “T” Gasket Only Inches + 1 x 5 $523.50 1Z\, x 6 566.50 1Z\, x 6 + 1Z\v x 6

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. † Surcharge for couplings supplied without gasket. Contact Victaulic for pricing. § Metric thread size bolts available. Contact Victaulic. NOTE: See Spare Parts Section for spare part prices. Style 808 couplings for double grooved pipe require special pipe double groove dimensions. Contact Victaulic for details.

SECTION 1 GROOVED IPS PIPE COUPLINGS

Nom. Size 6 8 10 12

Aprx. Wgt. Ea.

COUPLING COMPLETE † with Grade “HMT” Gasket Price Each

Style 870 Rigid Coupling

Rigid Coupling

STYLE 870 – PTFE SEAL

Aprx. Wgt. Ea.

COUPLING COMPLETE With PTFE Seal Assembly

SPARE PARTS

Lbs 8.4 9.5 10.6 16.1 25.6 43.2

Price Each $277.00 322.00 366.50 420.00 546.50 797.00

PTFE Seal Assembly $222.50 256.50 293.00 336.00 436.50 637.50

STYLE 870

Refer to publication 100.02.

PIPE Inches Nom. Size 2 2Z\x 3 4 6 8

Outside Dia. 2.375 2.875 3.500 4.500 6.625 8.625

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

VICTAULIC.COM PL2016-GENERAL-C

1-19


Grooved IPS Pipe Couplings Gaskets

Gaskets

For pricing couplings complete with any special gaskets – take the standard coupling price with Grade “E” or “T” gasket complete (PL2014 General Price List), subtract the standard gasket price, then add on the price of the special gasket. Gasket guidelines can be found in the latest Victaulic Gasket Selection Guide (publication 05.01). This information is general in scope and Victaulic should be consulted for guidelines when a question arises.

GASKETS FOR STYLES 07, HP-70, 75, 77, 78, 791, AND 997 COUPLINGS

SECTION 1 GROOVED IPS PIPE COUPLINGS

Nom. Size Inches C\v 1 1Z\v 1Z\x 2 2Z\x 3 3Z\x 4 4Z\x 5 6 8 10 12 13Z\x 14 OGS 15 OGS 16 OGS 18 OGS 20 OGS 22 OGS 24 OGS

Standard Gaskets Grade “E” EPDM $48.00 48.00 56.00 58.50 49.00 58.50 65.00 74.50 85.00 195.00 130.00 117.50 171.00 220.00 306.50 + 458.00 495.00 495.00 596.00 724.00 752.00 810.00

Grade “T” Nitrile $48.00 48.00 56.00 58.50 49.00 58.50 65.00 74.50 85.00 195.00 130.00 117.50 171.00 220.00 306.50 + 869.50 904.50 939.00 1132.00 1374.00 1425.50 1538.00

Flush-Seal Grade “E” $74.50 74.50 83.00 96.50 94.50 143.50 145.00 159.00 162.50 – 415.00 315.50 464.50 580.50 691.00 – 843.50 + 912.50 1099.00 1987.00 1987.00 1492.00

Flush-Seal Grade “T” $74.50 74.50 83.00 96.50 94.50 143.50 145.00 159.00 162.50 – 415.00 315.50 464.50 580.50 691.00 – 1255.00 + 1356.00 1634.00 1987.00 2088.50 2219.00

Grade “EW” EPDM – $57.50 65.50 72.00 59.50 71.50 78.50 – 103.00 – – 141.00 207.50 265.00 366.50 – – – – – – – –

Grade “O” Fluoroelastomer $305.00 368.50 432.00 360.50 366.00 593.50 728.00 + 1011.50 – 1255.00 1405.50 2351.50 3068.00 4254.50 – 5526.50 – 6242.50 7139.50 8301.00 + 13844.00

Special Gaskets Grade “V” Flush-Seal Black Grade “A” Neoprene White Nitrile + $179.50 + 129.00 + 295.00 + 295.00 + 162.50 + 155.50 + 190.50 – – + 260.50 – – + 526.00 + 620.50 + 778.50 + 789.00 + 795.50 – – + 3458.00 – – + + + + + + + + + +

Flush-Seal Grade “O” Fluoroelastomer $450.50 590.50 653.00 536.00 667.50 1029.00 869.00 – 1209.50 – 2067.00 1680.00 3884.00 6125.00 6254.50 – + – + + + + +

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability.

1-20

VICTAULIC.COM PL2016-GENERAL-C


Grooved IPS Pipe Couplings FOR STYLE W07/W77 AGS GASKETS

Nom. Size Inches 14 16 18 20 24 26 28 30 32 36 40 42 46 48 54 56 60

Grade “E” $528.50 568.50 686.00 831.50 932.00 + + + + + + + + + + + +

AGS Gasket Flush-Seal Grade “T” or “L” $745.50 802.50 959.00 1112.50 1228.00 + + + + + + + + + + + +

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability.

Nom. Size Inches C\v 1 1Z\v 1Z\x 2 2Z\x 3 3Z\x 4 4Z\x 5 6 8 10 12 14 15 16 18 20 22 24

Grade “L” Silicone $290.50 290.50 328.00 344.00 351.00 366.00 388.50 429.50 439.50 + 446.00 449.00 455.00 459.50 526.50 536.00 + 592.00 979.50 1048.00 1084.50 1084.50

Flush-Seal Grade “L” Silicone + $510.50 510.50 510.50 518.00 532.50 539.00 – 548.50 + 557.50 559.50 567.50 593.50 655.00 667.00 – 740.50 1222.00 1309.00 – 1355.00

SECTION 1 GROOVED IPS PIPE COUPLINGS

SILICONE GASKETS FOR STYLES 07, HP-70, 75, 77, 78, 791 AND 997 COUPLINGS

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability.

VICTAULIC.COM PL2016-GENERAL-C

1-21


Grooved IPS Pipe Couplings Gaskets

STANDARD “E” OR “T” GASKETS FOR STYLE 750

Nom. Size Inches Run x Brch. 2 x 1 1Z\x x 2 2Z\x 3 x 2 2Z\x 4 x 2 2Z\x 3 5 x 4 6 x 4 5 8 x 6 10 x 8

Price Each Grade “E” or “T” $78.50 87.00 68.00 87.00 87.00 104.00 102.00 102.00 121.00 149.00 136.00 183.00 227.00

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

M-2 GASKETS FOR STYLES 07, HP-70, 77 AND 997 COUPLINGS

SECTION 1 GROOVED IPS PIPE COUPLINGS

Nominal Size Inches 1 1Z\v 1Z\x 2 2Z\x 3 4 5 6 8

Grade “M-2” Gaskets + + + + + + + + + +

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability.

Gaskets NOTE: For pricing couplings complete with any special gaskets, contact Victaulic. Gasket guidelines can be found in the latest Victaulic Gasket Selection Guide (publication 05.01). This information is general in scope and Victaulic should be consulted for guidelines when a question arises.

STANDARD “E” OR “T” GASKET FOR STYLE 72

Nom. Size Inches Run x Brch. 1Z\x x Z\x C\v 2

2Z\x

x

1 Z\x C\v

x

1 Z\x C\v 1 1Z\v 1Z\x

Price Each Style 72 $119.50 119.50 119.50 121.00 121.00 121.00 195.00 195.00 195.00 195.00 195.00

Nom. Size Inches Run x Brch. 3 x C\v

4

6

x

x

1 1Z\v 1Z\x C\v 1 1Z\x 2 1 1Z\x 2

Price Each Style 72 $201.50 201.50 201.50 201.50 235.50 235.50 540.50 540.50 738.50 738.50 738.50

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

1-22

VICTAULIC.COM PL2016-GENERAL-C


Grooved IPS Pipe Couplings Victaulic Lubricant

Victaulic Lubricant

LUBRICANT PACK With 12 Tubes – 4 Fluid Ounces Each CONTAINER One Quart (32 Fluid Ounces) – Container

Price Each $450.50 160.50

To ensure easy assembly and service of all your Victaulic installations, be sure to include plenty of Victaulic Lubricant with every order. The following chart provides a rough gauge of quantities recommended, based on the number of units sold. NOTE: Items listed in shaded areas are non-cancellable and non-returnable. NOTE: Victaulic lubricant is not recommended for use with HDPE pipe.

Size of Gasket Inches 2 3 4 6

Number of Gaskets Per Tube 55 36 26 17

Per Quart 400 270 200 125

LUBRICANT USAGE GUIDE Size of Number of Gaskets Gasket Inches Per Tube Per Quart 8 13 100 10 11 80 12 8 60 14 7 50

Size of Gasket Inches 16 18 20 24

Number of Gaskets Per Tube 6 5 4 3

Per Quart 45 35 30 20

Flange Gaskets – Styles 741, W741, 743

Flange Gaskets

FOR STYLE 741, W741 AND 743 VIC-FLANGE ADAPTERS

Flange Size

FOR STYLE 741, W741 AND 743 VIC-FLANGE ADAPTERS

Special Gaskets Price Each

Style 741/743 Grade “E” or “T” Gasket Only $49.00 53.00 58.00 75.00 91.00 117.50 147.00 182.50 210.00 386.00 404.00 458.00 580.50 704.00

Style 741 Grade “O” Fluoroelastomer $651.50 721.00 818.50 884.00 988.00 1102.50 1237.50 2435.50 2967.00 3156.50 3852.00 – 4895.50 –

Style 741/743 Grade “L” Silicone $200.50 266.00 338.50 409.00 580.50 587.00 611.00 626.00 659.50 829.50 880.50 932.50 992.50 1095.00

Style 741/743 Grade “A” White Nitrile Gasket Only $309.00 309.00 617.50 926.00 1234.50 1541.50 1849.50 2157.50 + + + + + +

SECTION 1 GROOVED IPS PIPE COUPLINGS

Inches 2 2Z\x 3 4 5 6 8 10 12 14 * 16 * 18 * 20 * 24 *

Standard Gaskets Price Each

* Flange gaskets supplied for Style W741 AGS Flange NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability.

Swing Handle Wrench

Swing Handle Wrench

SWING HANDLE WRENCH

Size ZZ\zn” and M\,” Sockets for C\,” and Z\x” Hvy Hex Nuts M\,” and 1Z\zn” Sockets for Z\x” and B\,” Hvy Hex Nuts

Part Number P000000001 P000000002

Purchase List Price Each $91.50 96.50

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. # Tool discount applies.

VICTAULIC.COM PL2016-GENERAL-C

1-23


Grooved IPS Pipe Couplings Plated Trackhead Bolts and Nuts

Plated Trackhead Bolts and Nuts

PLATED TRACKHEAD BOLTS AND NUTS

Bolt and Nut Size Inches 2 C\, x Z\x x 2Z\x

B\,

x

C\v

x

M\,

x

2C\v 3 3Z\v 2C\v 3Z\v 3Z\x 4 4Z\v 4Z\v 5 5C\v 5 5Z\x 6Z\x

Price Each $15.00 18.00 18.50 20.00 20.00 18.50 25.00 25.00 28.50 36.50 54.50 756.50 48.00 51.00 79.00

Bolt and Nut Size Inches 1 x 3Z\x 5 5Z\x 6 6Z\x 4 1Z\, x 5Z\x 1Z\v x 3Z\x 5Z\x 1C\, x 5C\v 1Z\x x 4Z\x 5C\v 6 1C\v x 6 1M\, x

Price Each $58.50 102.00 87.00 75.00 71.50 164.00 164.00 178.00 194.00 230.00 321.00 243.00 569.00 778.00

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability.

SECTION 1 GROOVED IPS PIPE COUPLINGS

Installation Ready™ Bolts and Nuts

Installation-Ready™ Bolts and Nuts

NYLON COATED BOLTS AND NUTS FOR STYLES 107H, 177 AND 607 INSTALLATION-READY COUPLINGS

Bolt and Nut Size Inches C\, x 2Z\x Z\x x 3 Z\x x 3Z\v B\, x 3Z\v 4 C\v x 5

Price Each $35.50 34.00 + 36.00 41.50 +

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability.

Go-No-Go Tape

Go-No-Go Tape

Tool Model PT-100-A Go/No-Go Grooved Pipe Diameter Tape Each Box of 6

Part Number RW75-100-MCH RW75-100-KIT

Purchase Price $74.50 433.50

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. # Tool discount applies.

Elbows – No. 10 – 90°, No. 11 - 45°

1-24

VICTAULIC.COM PL2016-GENERAL-C


Grooved IPS Pipe Couplings Grooved IPS Pipe Fittings When ordering ALWAYS verify with Victaulic Customer Service that fitting dimensions meet installation requirements.

Elbows 1D Refer to publication 07.01

ELBOWS – 90° ELBOW OR 45° ELBOW

Nom. Size Inches C\v

No. 10

No. 11

1 1Z\v 1Z\x 2 2Z\x 3 3Z\x 4 5 6 8 10 12

Aprx. Wgt. Ea. Lbs. 0.5 0.6 1.0 1.2 1.8 3.2 4.5 5.6 7.1 11.7 17.2 29.9 63.3 74.0

90° Elbow No. 10 Price Each C-E Inches Painted Galv. 2.25 $128.50 $166.00 2.25 128.50 166.00 2.75 128.50 166.00 2.75 128.50 166.00 3.25 128.50 166.00 3.75 128.50 172.50 4.25 169.50 235.00 4.50 241.00 323.00 5.00 262.00 366.50 5.50 493.00 660.00 6.50 639.00 890.00 7.75 1090.00 1553.50 9.00 1694.00 2414.00 10.00 2590.50 4070.00

Aprx. Wgt. Ea. Lbs. 0.5 0.6 0.9 0.9 1.3 2.2 3.1 4.3 5.6 8.3 10.8 20.4 37.5 66.7

45° Elbow No. 11 Price Each C-E Inches Painted Galv. 1.50 $128.50 $166.00 1.75 128.50 166.00 1.75 128.50 166.00 1.75 128.50 166.00 2.00 128.50 166.00 2.25 128.50 166.00 2.50 169.50 220.00 2.75 241.00 323.00 3.00 262.00 341.00 3.25 493.00 633.00 3.50 639.00 829.00 4.25 1011.50 1270.00 4.75 1363.00 1821.50 5.25 1936.00 2521.50

Cut grooved fittings are non-cancellable and non-returnable.

No. W10 – 90°, No. W11 – 45°

AGS Elbows

N

VIC T o.W AU 10 LIC

Refer to publication 20.05

VICT No. AULIC W11

No. W10

No. W11

AGS ELBOWS – 90° ELBOW OR 45° ELBOW

Nom. Size Inches 14 16 18 20 24 26 28 30 32 36 40 42 46 48 54 56 60

Aprx. Wgt. Ea. Lbs 150.8 184.3 272.3 312.0 559.8 586.0 680.0 887.0 1012.0 1283.0 1907.0 2169.0 1527.0 (sw) 1661.0 (sw) 2094.0 (sw) 2252.0 (sw) 2583.0 (sw)

90° Elbow No. W10 Price C-E Inches Painted 14.00 $2248.50 16.00 3063.50 18.00 4258.00 20.00 5581.00 24.00 8677.00 26.00 + 28.00 + 30.00 + 32.00 + 36.00 + 40.00 + 42.00 + 46.00 + 48.00 + 54.00 + 56.00 + 60.00 +

Each Galv. $3224.00 4543.00 6458.00 8187.50 12907.00 + + + + + + + + + + + +

Aprx. Wgt. Ea. Lbs 63.0 93.8 129.0 165.3 246.0 278.0 325.0 420.0 483.0 617.0 915.0 1042.0 761.0 (sw) 828.0 (sw) 1042.0 (sw) 1120.0 (sw) 1285.0 (sw)

45° Elbow No. W11 Price C-E Inches Painted 5.80 $1222.50 6.63 1809.00 7.46 2528.00 8.28 3172.50 9.94 4884.50 10.80 + 11.60 + 12.40 + 13.25 + 14.91 + 16.57 + 17.93 + 19.10 + 19.90 + 22.40 + 23.20 + 24.90 +

Each Galv. $1658.50 2533.50 3583.00 4590.00 7155.50 + + + + + + + + + + + +

SECTION 1 GROOVED IPS PIPE COUPLINGS

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. NOTE: AGS products must NOT be used on pipe that has been grooved using Original Groove System (OGS) roll sets. These fittings are roll grooved to AGS dimensions for use with AGS couplings Styles W77 and W07. They cannot be used with original grooved pipe or couplings. Contact Victaulic for original cut grooved fittings 14 to 24” to be used with non-AGS Style 77 couplings. + Quoted on application. Contact Victaulic for pricing and availability.

VICTAULIC.COM PL2016-GENERAL-C

1-25


Grooved IPS Pipe Couplings No. 12 – 22Z\x°, No. 13 – 11Z\v°

Elbows Refer to publication 07.01

No. 12

No. 13

ELBOWS – 22Z\x° ELBOW OR 11Z\v° ELBOW

Nom. Size Inches 1 1Z\v 1Z\x 2 2Z\x 3 3Z\x 4 5 6 8 10 12

Aprx. Wgt. Ea. Lbs 0.6 ‡ 0.8 0.8 1.4 ‡ 2.3 ‡ 3.1 ‡ 4.0 (sw) 5.6 7.8 (sw) 12.2 ‡ 20.0 ‡ 30.0 (sw) 40.0 (sw)

22Z\x° Elbow No. 12 Price C-E Inches Painted 3.25 $142.00 1.75 149.50 1.75 149.50 3.75 151.00 4.00 149.50 4.50 159.00 2.50 + 2.88 295.50 2.88 616.00 6.25 730.00 7.75 1492.50 4.38 2013.00 4.88 2150.50

Each Galv. $172.00 183.50 183.50 183.50 183.50 210.50 + 387.50 773.50 941.50 1877.50 2551.50 2801.00

Aprx. Wgt. Ea. Lbs 0.3 (sw) 0.5 (sw) 0.5 (sw) 1.0 1.5 2.1 2.7 (sw) 3.6 5.0 (sw) 7.0 10.1 11.8 29.3

11Z\v° Elbow No. 13 Price C-E Inches Painted 1.38 $142.00 1.38 149.50 1.38 149.50 1.38 149.50 1.50 149.50 1.50 159.00 1.75 + 1.75 292.00 2.00 601.00 2.00 706.50 2.00 1306.50 2.13 1541.50 2.25 1778.50

Each Galv. + $183.50 183.50 183.50 183.50 200.00 + 363.50 727.50 864.50 1576.50 1851.00 2281.00

Cut grooved fittings are non-cancellable and non-returnable. NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability. (sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.

SECTION 1 GROOVED IPS PIPE COUPLINGS

‡ Gooseneck design.

No. W12 – AGS 22Z\x°, No. W13 – AGS 11Z\v°

AGS Elbows Refer to publication 20.05

No. W12

No. W13

AGS ELBOWS – 22Z\x° ELBOW OR 11Z\v° ELBOW

Nom. Size Inches 14 16 18 20 24 26 28 30 32 36 40 42 46 48 54 56 60

Aprx. Wgt. Ea. Lbs 46.0 58.0 65.0 78.6 140.0 122.0 136.0 151.0 167.0 194.0 322.0 348.0 392.0 420.0 592.0 627.0 698.0

22Z\x° Elbow No. W12 Price Each C-E Inches Painted Galv. 5.00 $1847.50 $2336.50 5.00 2286.00 2898.00 5.50 2605.50 3297.50 6.00 2916.00 3724.00 7.00 4426.00 5772.00 6.80 + + 7.00 + + 7.30 + + 7.50 + + 7.80 + + 8.80 + + 9.00 + + 9.30 + + 9.50 + + 12.00 + + 12.30 + + 12.80 + +

Aprx. Wgt. Ea. Lbs 32.0 42.0 53.2 65.0 60.0 92.0 104.0 112.0 124.0 140.0 234.0 246.0 280.0 303.0 437.0 465.0 512.0

11Z\v° Elbow No. W13 Price Each C-E Inches Painted Galv. 3.50 $1872.50 $2297.00 4.00 2317.50 2857.50 4.50 2651.00 3299.50 5.00 2957.00 3716.00 6.00 4633.50 5910.00 5.00 + + 5.30 + + 5.30 + + 5.50 + + 5.50 + + 6.30 + + 6.30 + + 6.50 + + 6.80 + + 8.80 + + 9.00 + + 9.30 + +

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. NOTE: AGS products must NOT be used on pipe that has been grooved using Original Groove System (OGS) roll sets. + Quoted on application. Contact Victaulic for pricing and availability.

1-26

VICTAULIC.COM PL2016-GENERAL-C


Grooved IPS Pipe Couplings No. 100 and No. 110 1Z\x D Long Radius Elbows

Long Radius – 1Z\x D Elbows

LONG RADIUS – 90° LONG RADIUS ELBOW OR 45° LONG RADIUS ELBOW

Nom. Size

Refer to publication 07.01

No. 100

No. 110

Inches 2 2Z\x 3 4 5 6 8 10 12 14 16 18 20 24

90° Long Rad. Elbow No. 100 * Aprx. Price Each Wgt. Ea. C-E Lbs Inches Painted Galv. 2.5 4.38 $186.00 $232.50 3.4 5.13 271.00 331.50 6.0 5.88 271.00 357.50 12.3 7.50 418.50 578.50 18.0 (sw) 9.25 1405.50 1725.00 30.4 10.75 1043.50 1439.00 66.0 14.25 2112.50 2943.50 107.0 15.00 2883.50 3933.50 156.0 18.00 4219.50 6006.50 164.0 21.00 7392.00 9552.50 210.0 24.00 7880.50 10508.50 273.0 27.00 10542.00 15574.50 343.0 30.00 13824.50 22346.50 516.0 36.00 23393.50 30339.50

45° Long Rad. Elbow No. 110 * Aprx. Price Each Wgt. Ea. C-E Lbs Inches Painted Galv. 1.8 2.75 $187.00 $225.50 2.8 3.00 540.00 649.50 4.9 3.38 254.50 333.50 7.3 4.00 319.50 429.00 14.8 (sw) 4.88 1328.50 1690.50 17.4 5.50 702.00 953.00 36.0 7.25 2031.00 2592.50 57.0 6.25 2620.00 3364.50 90.0 7.50 3120.00 4086.00 82.0 8.75 4921.00 6353.50 100.0 10.00 6209.00 7686.50 135.0 11.25 7999.50 10043.50 174.0 12.50 9029.00 11811.00 251.0 15.00 14158.50 17694.00

Cut grooved fittings are non-cancellable and non-returnable. NOTE: Items listed in shaded areas are non-cancellable and non-returnable. * See pages 58 – 61 for long radius 3-D, 5-D and 6-D bends. (sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.

AGS Long Radius – 1Z\x D Elbows

N

VIC T o.W AU 10 LIC 0

Refer to publication 20.05

VICT No. AULIC W11 0

No. W100

No. W110

AGS LONG RADIUS – 90° LONG RADIUS ELBOW OR 45° LONG RADIUS ELBOW

Nom. Size Inches 14 16 18 20 24 26 28 30 32 36 40 42 46 48 54 56 60

90° Long Rad. Elbow No. W100 Aprx. Price Each Wgt. Ea. C-E Lbs Inches Painted Galv. 210.4 21.00 $5370.50 $6942.00 274.8 24.00 5726.50 7637.00 383.9 27.00 7660.50 11318.00 474.3 30.00 10046.00 16239.50 746.6 36.00 17000.50 22048.50 877.0 39.00 + + 1019.0 42.00 + + 1268.0 45.00 + + 1517.0 48.00 + + 1925.0 54.00 + + 2883.0 60.00 + + 3260.0 63.00 + + 3260.0 (sw) 69.00 + + 2471.0 (sw) 72.00 + + 3120.0 (sw) 81.00 + + 3355.0 (sw) 84.00 + + 3850.0 (sw) 90.00 + +

45° Long Rad. Elbow No. W110 Aprx. Price Each Wgt. Ea. C-E Lbs Inches Painted Galv. 105.9 8.75 $3575.50 $4616.00 137,4 10.00 4512.00 5585.00 191.6 11.25 5812.50 7297.50 237.1 12.50 6561.00 8583.00 373.3 15.00 10289.00 12858.00 421.0 16.00 + + 491.0 17.30 + + 612.0 18.50 + + 733.0 19.80 + + 935.0 22.30 + + 1397.0 24.90 + + 1583.0 26.00 + + 1210.0 (sw) 286.00 + + 1314.0 (sw) 296.00 + + 1648.0 (sw) 336.00 + + 1769.0 (sw) 346.00 + + 2023.0 (sw) 376.00 + +

SECTION 1 GROOVED IPS PIPE COUPLINGS

No. W100 and W110 1Z\x D AGS Long Radius Elbow

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. NOTE: AGS products must NOT be used on pipe that has been grooved using Original Groove System (OGS) roll sets. + Quoted on application. Contact Victaulic for pricing and availability.

VICTAULIC.COM PL2016-GENERAL-C

1-27


Grooved IPS Pipe Couplings No. 890 and 890H – Long Radius 90°, No. 811 and 811H – 45°

Long Radius Elbows Refer to publication 100.01

No. 890 and No. 890H

ELBOWS – LONG RADIUS 90° ELBOW OR 45° ELBOW

Nom. Size

Inches 2 2Z\x 3 4 6 8

Long Radius 90° Elbow No. 890 No. 890H Sch. 40 Sch. 80 Aprx. Aprx. Wgt. Ea. Price Wgt. Ea. Price Lbs Each Lbs Each 3.2 $342.00 4.5 $445.00 5.7 342.00 7.8 445.00 8.1 342.00 11.3 445.00 13.8 508.00 19.7 660.00 32.7 1442.50 50.4 1802.50 62.1 3471.00 96.4 4306.00

45° Elbow No. 811 No. 811H Sch. 40 Sch. 80 Aprx. Aprx. Wgt. Ea. Price Wgt. Ea. Price Lbs Each Lbs Each 2.4 $297.00 3.5 $386.50 4.2 297.00 5.8 386.50 5.8 297.00 8.1 386.50 9.4 361.00 13.4 469.50 20.4 1035.00 31.5 1293.50 37.6 1798.50 58.3 2247.00

SECTION 1 GROOVED IPS PIPE COUPLINGS

No. 811 and No. 811H

No. R-10G and No. R-10F Reducing Base Support Elbow

Reducing Base Support Elbows Refer to publication 07.01

No. R-10G Grooved x Grooved

REDUCING BASE SUPPORT ELBOWS – GROOVED X GROOVED OR GROOVED X FLANGED

Nom. Size Inches Inlet x Outlet 6 x 4 6 x 5 8 x 6 10 x 8

Grooved x Grooved No. R-10G Aprx. Price Each Wgt. Each Lbs Painted Galv. 19.0 $1295.00 $1637.00 23.0 1334.00 1716.50 33.0 2231.50 2823.50 61.0 3990.50 5046.50

Grooved x Flanged No. R-10F Aprx. Price Each Wgt. Each Lbs Painted Galv. 33.0 $1763.00 $2291.50 38.0 1841.00 2451.00 52.0 2857.00 3691.50 88.0 4705.50 6254.50

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

No. R-10F Grooved x Flanged

1-28

VICTAULIC.COM PL2016-GENERAL-C


Grooved IPS Pipe Couplings No. 10-DR Drain Elbow

Drain Elbow NO. 10-DR

Refer to publication 10.05 USA

DRAIN ELBOW

Aprx Wgt. Ea. Lbs 5.2 5.3 8.8 18.7

Nom. Size Inches 2Z\x 3 4 6

Price Each Painted $297.00 332.50 410.50 736.50

Galv. $372.00 413.50 528.00 969.50

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

No. 20 Tee, No. 29M Tee with Threaded Branch

Tees

TEES – TEE OR TEE WITH THREADED BRANCH

Refer to publication 07.01 Nom. Size Inches C\v No. 20

Lbs 0.6 1.0 1.5 2.0 3.0 4.3 6.8 7.9 (sw) 11.3 15.0 (sw) 17.8 25.7 47.6 99.0 133.0

Tee No. 20 Price Each Painted Galv. $241.00 $316.50 241.00 316.50 241.00 316.50 241.00 316.50 241.00 316.50 241.00 316.50 293.00 386.50 402.50 511.50 408.00 577.50 + + 785.00 1045.50 1082.00 1470.50 1812.00 2477.50 1810.50 2931.00 2461.00 4189.50

Tee with Male Threaded Branch No. 29M Price Each Painted Galv. + + – – $313.00 $396.00 313.00 396.00 313.00 348.00 – – – – + + 1688.50 2016.50 – – 3037.00 + 2970.00 3363.50 + + + + + +

SECTION 1 GROOVED IPS PIPE COUPLINGS

No. 29M

1 1Z\v 1Z\x 2 2Z\x 3 3Z\x 4 4Z\x 5 6 8 10 12

Aprx. Wgt. Ea.

Cut grooved fittings are non-cancellable and non-returnable. NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability. (sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.

VICTAULIC.COM PL2016-GENERAL-C

1-29


Grooved IPS Pipe Couplings No. W20 AGS Tee

AGS Tees Refer to publication 20.05 VICTAULIC No.W20

No. W20

AGS STANDARD TEE

Nom. Size

Aprx Wgt. Ea.

Inches 14 16 18 20 24 26 28 30 32 36 38 40 42 46 48 54 56 60

Lbs 102.0 123.5 281.0 350.0 503.7 634.0 741.0 855.0 1190.0 1608.0 1496.0 1968.0 2891.0 2620.0 3805.0 3656.0 3961.0 4325.0

Tee - No. W20 Price Each Painted $2235.00 2752.50 4397.50 5787.50 8554.50 + + + + + + + + + + + + +

Galv. $3473.50 4309.50 7144.50 8521.00 10626.00 + + + + + + + + + + + + +

SECTION 1 GROOVED IPS PIPE COUPLINGS

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. NOTE: AGS products must NOT be used on pipe that has been grooved using Original Groove System (OGS) roll sets. + Quoted on application. Contact Victaulic for pricing and availability.

No. 820 and No. 820H Tee

Tee Refer to publication 100.01

No. 820 and No. 820H

1-30

NO. 820 STANDARD TEE

No. 820 Sch. 40

Nominal Inches 2 2Z\x 3 4 6 8

Aprx. Wgt. Ea. Lbs 5.6 9.6 12.2 20.1 46.1 77.9

No. 820H Sch. 80 Price Each $235.00 235.00 320.50 487.50 1281.50 2806.50

Aprx. Wgt. Ea. Lbs 7.9 13.1 16.9 28.6 71.3 121.0

Price Each $305.00 305.00 416.50 633.00 1601.50 3506.50

VICTAULIC.COM PL2016-GENERAL-C


Grooved IPS Pipe Couplings No. 35 Cross, No. 33 True Y

Cross and Wye Refer to publication 07.01

CROSS AND WYE – STEEL CROSS OR STEEL 90 TRUE Y

Nom. Size Inches C\v 1 1Z\v 1Z\x 2 2Z\x 3 3Z\x 4 5 6 8 10 12

No. 35

No. 33

Aprx Wgt. Ea. Lbs 0.9 1.3 2.1 2.5 3.8 6.1 10.5 11.5 15.8 20.0 28.0 48.0 121.5 110.0

Steel Cross (sw) No. 35 Price Each Painted $652.50 652.50 652.50 1019.50 212.50 605.00 468.50 1803.50 725.50 1773.00 2176.50 3785.50 4740.50 6933.00

Galv. $681.00 681.00 771.50 1213.00 275.00 737.50 625.00 2111.50 962.50 1951.50 2705.50 4697.50 6578.00 8213.00

Steel 90 True Wye (sw) No. 33 Aprx Price Each Wgt. Ea. Lbs Painted Galv. 0.7 + + 1.1 $359.00 $415.50 1.5 366.00 481.50 1.8 426.00 503.00 2.5 426.00 503.00 4.3 575.00 689.50 6.1 731.50 883.50 9.6 + + 9.8 1057.00 1289.50 15.0 1637.00 1988.50 22.3 1975.50 2445.00 36.0 2594.50 3278.50 69.9 3405.50 4512.00 80.0 4312.00 5578.00

Cut grooved fittings are non-cancellable and non-returnable. NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability.

AGS Cross and Wye

AGS CROSS AND WYE – STEEL CROSS OR STEEL 90 TRUE Y

Nom. Size

Refer to publication 20.05 VICTAULIC No.W35

No. W35

Inches 14 16 18 20 24

Aprx. Wgt. Ea. Lbs 168.0 216.0 278.0 348.0 488.0

Steel Cross (sw) No. W35 Price Each Painted $5032.00 7218.00 9412.00 11138.00 16654.50

Galv. $6297.00 8844.00 11505.50 13758.00 20327.50

Steel 90 True Wye (sw) No. W33 Aprx. Price Each Wgt. Ea. Lbs Painted Galv. 114.0 $3561.50 $4420.00 144.0 4772.00 5856.50 185.0 6246.00 7638.50 216.0 8154.50 9780.50 343.0 15092.50 17675.50

SECTION 1 GROOVED IPS PIPE COUPLINGS

No. W35 AGS Cross, No. W33 AGS True Y

VIC N TA o.W U L 33 IC

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. NOTE: AGS products must NOT be used on pipe that has been grooved using Original Groove System (OGS) roll sets.

No. W33

VICTAULIC.COM PL2016-GENERAL-C

1-31


Grooved IPS Pipe Couplings No(s). 40, 42, and 43 Adapter Nipples

Roll Grooved Adapter Nipples † Same prices apply for: No. 40 Grooved x Threaded No. 42 Grooved x Beveled No. 43 Grooved x Grooved Refer to publication 07.01

No. 40

No. 42

ADAPTER NIPPLES – GROOVED X THREADED, GROOVED X BEVELED, OR GROOVED X GROOVED

Nom. Size

Aprx. Wgt. Ea. 3

Inches Lbs C\v 0.1 1 0.1 1Z\v 0.2 1Z\x 0.2 2 0.3 2Z\x 0.5 3 0.6 3Z\x 0.8 4 0.9 5 1.2 6 1.6 8 2.5 10 3.4 12 * 4.1

Black $23.00 22.00 +* +* 38.00* +* +* +* +* +* +* +* +* +*

Price Per Length Inches 5 6 Black Galv. Black Galv. Black Galv. $27.00* $37.00* +* +* $35.00* +* 26.00* 30.50* +* +* 32.50* $40.00* 38.00 47.00 +* +* 41.00* +* 38.00 47.00 $44.00* $50.50* 49.00* 60.50* 41.00 50.50 56.50* 64.00* 50.00* 65.00* 64.00 83.00 131.50* +* 78.50* 104.00* 74.00 96.00 154.00* +* 86.00* 118.00* 145.00* 217.00* +* +* +* +* 96.00* 126.50* 136.00* 177.00* 125.00 170.50 +* +* 418.00* +* 397.00 475.50 +* +* 446.00* +* 451.00 550.00 +* +* +* +* 611.50 + +* +* +* +* 877.50* +* +* +* +* +* 1004.00* +* 4

Galv. $32.50 26.00 +* +* 50.00* +* +* +* +* +* +* +* +* +*

8 Black +* $49.50* +* 74.00* 97.50* 104.00* 161.50* +* 198.50* 403.50* 529.50* 666.00* 930.00 1012.50

Galv. +* +* +* $89.00* +* +* 206.00* +* 260.50* 492.00* 656.50* +* + 1351.00

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

SECTION 1 GROOVED IPS PIPE COUPLINGS

No. 43

Other sizes available upon request. Contact Victaulic for details. + Quoted on application. Contact Victaulic for pricing and availability. Unless otherwise specified, Adapter Nipples for nominal pipe sizes 6” and smaller are made from Schedule 40 pipe; for nominal sizes 8” and larger, from Schedule 30 pipe. Special lengths not shown, heavier wall thickness are priced on application. * These sizes available only in No. 42 grooved x beveled and No. 43 grooved x grooved. † For cut groove adapter nipples contact Victaulic for pricing and availability.

No(s). W42, W43 and W49 AGS Adapter Nipples

AGS Adapter Nipples Same prices apply for: No. W42 AGS Grooved x Beveled No. W43 AGS Grooved x AGS Grooved No. W49 AGS Grooved x Grooved Refer to publication 20.05

No. W42

No. W43

AGS ADAPTER NIPPLES – NO. W42 AGS GROOVED X BEVELED, NO. W43 AGS GROOVED X AGS GROOVED, OR NO. W49 AGS GROOVED X ORIGINAL GROOVED

Nom. Size Inches 14 16 18 20 24 26 28 30 32 36 40 42 46 48

Length Inches * 8 8 8 8 8 12 12 12 12 12 12 12 12 12

Aprx. Wgt. Ea. Lbs 36.0 42.0 47.0 52.0 63.0 104.0 112.0 120.0 128.0 190.0 211.0 222.0 243.0 254.0

Price Each $860.50 1223.50 1309.50 1452.00 2139.00 + + + + + + + + +

NOTE: Items listed in shaded areas are special order, non-cancellable and non-returnable items.

No. W49

NOTE: AGS products must NOT be used on pipe that has been grooved using Original Groove System (OGS) roll sets. Please specify nipple style number when ordering. Unless otherwise specified, Adapter Nipples are constructed using standard wall pipe. * Other lengths available. Contact Victaulic for details. NOTE: For original roll grooved 14 – 24” adapters please contact your local Victaulic sales representative. + Quoted on application. Contact Victaulic for pricing and availability.

1-32

VICTAULIC.COM PL2016-GENERAL-C


Grooved IPS Pipe Couplings No. 80 Female Threaded Adapter

Female Threaded Adapter Refer to publication 07.01

FEMALE THREADED ADAPTER

Nom. Size Inches C\v 1 1Z\v 1Z\x 2 2Z\x 3 4

No. 80

Aprx. Wgt. Each Lbs 1.0 1.0 1.5 (sw) 1.5 (sw) 1.4 1.5 2.9 4.5

No. 80 Price Each Painted $243.00 243.00 243.00 243.00 243.00 243.00 243.00 291.50

Galv. $285.50 285.50 285.50 285.50 285.50 285.50 285.50 363.50

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. (sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.

No(s). 18 and 19 Adapter Elbows

Adapter Elbows Refer to publication 07.01

Nom. Size Inches C\v 1 1Z\v 1Z\x 2 2Z\x 3

90° Adapter Elbow No. 18 Aprx. Price Each Wgt. Ea. Lbs Painted Galv. 0.5 $194.00 $227.00 0.5 194.00 227.00 0.9 203.00 239.00 1.1 247.50 293.00 2.5 269.50 318.00 3.0 287.50 354.00 5.8 419.50 517.50

45° Adapter Elbow No. 19 Aprx. Price Each Wgt. Ea. Lbs Painted Galv. 0.5 $123.50 $161.50 0.6 – – 0.6 – – 0.9 305.00 354.50 1.9 – – 2.3 361.00 430.00 5.0 519.50 602.00

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

No. 19

VICTAULIC.COM PL2016-GENERAL-C

SECTION 1 GROOVED IPS PIPE COUPLINGS

No. 18

ADAPTER ELBOWS – 90° ADAPTER ELBOW OR 45° ADAPTER ELBOW

1-33


Grooved IPS Pipe Couplings No. 25 Grooved Reducing Tee

Reducing Tee

REDUCING TEE

Size Inches

Refer to publication 07.01

No. 25

1 1Z\v 1Z\x

2

2Z\x

SECTION 1 GROOVED IPS PIPE COUPLINGS

3

4

5

6

8

Run x Branch x 1 x C\v (sw) x 1Z\v x 1 (sw) x 1Z\x x C\v (sw) 1 (sw) 1Z\v (sw) C\v x 2 x 1 1Z\v (sw) 1Z\x x 2Z\x x C\v (sw) 1 1Z\v 1Z\x 2 x 3 x C\v (sw) 1 1Z\v 1Z\x 2 2Z\x x 4 x C\v (sw) 1 1Z\v (sw) 1Z\x 2 2Z\x 3 x 5 x 1 (sw) 1Z\x (sw) 2 (sw) 2Z\x 3 4 x 6 x 1 (sw) 1Z\x (sw) 2 2Z\x 3 4 5 x 8 x 1Z\x (sw) 2 (sw) 2Z\x (sw) 3 (sw)

Aprx. Wgt. Each Lbs 1.0 1.3 1.5 1.5 1.7 2.5 2.7 1.8 3.0 3.9 3.8 4.2 3.9 4.5 5.7 6.1 8.0 6.5 6.2 6.4 8.0 7.8 9.6 10.2 11.2 11.4 11.6 14.0 14.3 14.5 15.2 16.6 16.7 23.0 24.0 21.6 21.4 26.5 25.0 23.2 33.0 33.5 39.0 33.6

Reducing Tee No. 25 Price Each Painted $310.00 310.00 310.00 310.00 310.00 314.00 314.00 314.00 314.00 512.00 316.50 512.00 512.00 521.50 288.50 341.00 826.50 346.50 341.00 346.50 998.50 363.50 998.00 393.00 393.00 488.50 513.00 763.00 763.00 800.00 763.00 800.00 817.00 1070.00 1070.00 1028.00 1028.00 1028.00 1049.00 1049.00 1485.50 1742.50 1742.50 1742.50

Galv. $372.50 372.50 372.50 372.50 372.50 383.50 383.50 386.50 386.50 630.00 389.00 625.00 620.50 624.50 376.50 446.50 964.00 450.00 448.00 446.00 1308.00 476.00 1374.00 540.00 540.00 650.50 678.50 987.50 987.50 1034.50 1003.50 1053.50 1066.50 1402.50 1402.50 1346.50 1342.00 1388.50 1398.50 1381.50 1800.50 2305.00 2306.00 2306.00

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. (sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.

1-34

VICTAULIC.COM PL2016-GENERAL-C


Grooved IPS Pipe Couplings Reducing Tee

Size Inches

Refer to publication 07.01

No. 25

8

Run x Branch x 8 x

10

x

10

12

x

12

4 5 (sw) 6 x 1Z\x 2 (sw) 2Z\x (sw) 3 (sw) 4 (sw) 5 (sw) 6 (sw) 8 (sw) x 1 (sw) 2 (sw) 2Z\x (sw) 3 (sw) 4 (sw) 5 (sw) 6 (sw) 8 (sw) 10 (sw)

Aprx. Wgt. Each Lbs 41.8 34.0 42.3 62.0 62.0 62.4 60.0 61.0 52.0 59.0 64.7 77.0 80.0 78.0 82.0 80.0 75.0 75.0 80.0 84.0

Reducing Tee No. 25 Price Each Painted $2077.00 2087.50 2077.00 2211.50 2786.50 2786.50 2786.50 2697.50 2468.00 2786.50 2786.50 2476.00 2476.00 2476.00 3446.00 3446.00 2638.00 3446.00 3446.00 3445.00

Galv. $2702.00 2645.50 2705.50 3030.50 3819.50 3819.50 3928.00 3760.00 3229.00 3689.00 3712.00 3622.00 3488.00 3622.00 4853.00 4849.00 3492.00 4534.00 4718.50 4700.00

(sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.

VICTAULIC.COM PL2016-GENERAL-C

SECTION 1 GROOVED IPS PIPE COUPLINGS

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

1-35


Grooved IPS Pipe Couplings No. W25 AGS Grooved Reducing Tee

AGS Reducing Tee

AGS REDUCING TEE *

Size Inches

Refer to publication 20.05 VICTAULIC No.W25

14 No. W25 16

18

SECTION 1 GROOVED IPS PIPE COUPLINGS

20

24

26

28

30

Run x Branch x 14 x 6 8 10 12 x 16 x 6 8 10 12 14 x 18 x 8 10 12 14 16 x 20 x 8 10 12 14 16 18 x 24 x 8 10 12 14 16 18 20 x 26 x 14 16 18 20 22 24 x 28 x 14 16 18 20 22 24 26 x 30 x 14 16 18 20 22 24 26 28

Aprx. Wgt. Each Lbs 142.0 143.0 144.0 147.0 176.0 185.0 195.0 204.0 210.0 231.0 244.0 254.0 262.0 269.0 282.0 295.0 308.0 316.0 329.0 342.0 381.0 394.0 409.0 419.0 433.0 453.0 473.0 536.0 545.0 562.0 582.0 600.0 617.0 605.0 624.0 644.0 665.0 685.0 705.0 717.0 689.0 707.0 728.0 750.0 774.0 796.0 820.0 838.0

AGS Reducing Tee No. W25 Price Each Painted $2655.50 2655.50 2693.50 3107.50 2901.00 2901.00 3167.00 3204.00 3759.00 4892.50 4892.50 5143.50 5456.00 5666.50 5444.00 5444.00 5729.00 5737.50 5745.50 6728.50 8395.50 8395.50 8577.00 8502.50 8856.00 9209.00 10137.50 + + + + + + + + + + + + + + + + + + + + +

Galv. $3257.00 3713.50 3775.00 4340.50 3954.00 4185.50 4479.50 4486.00 5339.50 6610.50 6117.00 7315.00 7746.00 7975.50 7453.00 7550.00 8222.00 7793.00 8222.50 8502.00 11722.50 12051.00 12317.50 10476.00 10904.50 11516.00 14298.00 + + + + + + + + + + + + + + + + + + + + +

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. NOTE: AGS products must NOT be used on pipe that has been grooved using Original Groove System (OGS) roll sets. * Victaulic fittings listed are made of segmentally welded steel. + Quoted on application. Contact Victaulic for pricing and availability.

1-36

VICTAULIC.COM PL2016-GENERAL-C


Grooved IPS Pipe Couplings AGS Reducing Tee

AGS REDUCING TEE *

Size Inches

Refer to publication 20.05 VICTAULIC No.W25

32 No. W25

36

38

42

AGS Reducing Tee No. W25 Price Each Painted + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +

Galv. + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +

SECTION 1 GROOVED IPS PIPE COUPLINGS

40

Run x Branch x 32 x 16 18 20 22 24 26 28 30 x 36 x 18 20 22 24 26 28 30 32 x 38 x 18 20 22 24 26 28 30 32 36 x 40 x 20 22 24 26 28 30 32 36 38 x 42 x 20 22 24 26 28 30 32 36 38 40

Aprx. Wgt. Each Lbs 1183.0 1209.0 1239.0 1272.0 1303.0 1334.0 1358.0 1385.0 1360.0 1369.0 1371.0 1418.0 1442.0 1477.0 1510.0 1543.0 1262.0 1278.0 1292.0 1314.0 1340.0 1367.0 1393.0 1420.0 1473.0 1475.0 1505.0 1543.0 1594.0 1631.0 1682.0 1768.0 1852.0 1929.0 1875.0 1940.0 2017.0 2105.0 2105.0 2202.0 2202.0 2304.0 1375.0 1761.0

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. NOTE: AGS products must NOT be used on pipe that has been grooved using Original Groove System (OGS) roll sets. * Victaulic fittings listed are made of segmentally welded steel. + Quoted on application. Contact Victaulic for pricing and availability.

VICTAULIC.COM PL2016-GENERAL-C

1-37


Grooved IPS Pipe Couplings AGS Reducing Tee

AGS REDUCING TEE *

Size Inches

Refer to publication 20.05 VICTAULIC No.W25

46 No. W25

SECTION 1 GROOVED IPS PIPE COUPLINGS

48

54

56

60

Run x Branch x 46 x 22 24 26 28 30 32 36 38 40 42 x 48 x 24 26 28 30 32 36 38 40 42 46 x 54 x 26 28 30 32 36 38 40 42 46 48 x 56 x 28 30 32 36 38 40 42 46 48 54 x 60 x 30 32 36 38 40 42 46 48 54 56

Aprx. Wgt. Each Lbs 1843.0 1865.0 1880.0 1900.0 1927.0 1953.0 2006.0 2033.0 2059.0 2086.0 2503.0 2525.0 2540.0 2579.0 2579.0 2652.0 2729.0 2804.0 2804.0 2881.0 2805.0 2805.0 2821.0 2835.0 2853.0 2879.0 2906.0 2932.0 2985.0 3012.0 3059.0 3075.0 3087.0 3111.0 3137.0 3164.0 3190.0 3243.0 3269.0 3349.0 3269.0 3380.0 3345.0 3386.0 3420.0 3459.0 3512.0 3538.0 3618.0 3644.0

AGS Reducing Tee No. W25 Price Each Painted + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +

Galv. + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. NOTE: AGS products must NOT be used on pipe that has been grooved using Original Groove System (OGS) roll sets. * Victaulic fittings listed are made of segmentally welded steel. + Quoted on application. Contact Victaulic for pricing and availability.

1-38

VICTAULIC.COM PL2016-GENERAL-C


Grooved IPS Pipe Couplings No. 825 and No. 825H Reducing Tee

Reducing Tee

NO. 825 REDUCING TEE

Refer to publication 100.01

Nom. Size Inches Run x Branch x 2Z\x x 2 x 3 x 2 2Z\x 4 x 4 x 2 2Z\x 3 6 x 6 x 2Z\x 3 4 8 x 8 x 4 6

2Z\x 3

No. 825 and No. 825H

No. 825 Sch. 40 Aprx. Wgt. Each Lbs 8.7 11.1 11.8 16.9 17.6 18.2 39.7 40.4 41.7 69.9 75.1

No. 825H Sch. 80 Price Each $478.00 426.00 426.00 574.00 574.00 574.00 1347.50 1347.50 1347.50 2806.50 2806.50

Aprx. Wgt. Each Lbs 11.9 15.4 16.4 24.1 25.0 25.9 61.2 62.3 74.3 108.6 116.6

Price Each $602.50 532.50 532.50 717.00 717.00 717.00 1684.50 1684.50 1684.50 3506.50 3506.50

SECTION 1 GROOVED IPS PIPE COUPLINGS

VICTAULIC.COM PL2016-GENERAL-C

1-39


Grooved IPS Pipe Couplings No. 29T Threaded Reducing Tee

Reducing Tee with Threaded Branch

REDUCING TEE WITH THREADED BRANCH

Refer to publication 07.01 1 1Z\v 1Z\x No. 29T

SECTION 1 GROOVED IPS PIPE COUPLINGS

2

Size Inches Run x Branch x 1 x C\v (sw) x 1Z\v x 1 (sw) x 1Z\x x C\v (sw) 1 (sw) 1Z\v (sw) C\v x 2 x

2Z\x

x

2Z\x

x

3

x

3

x

4

x

4

x

5

x

5

x

6

x

6

x

8

x

8

x

10

x

10

x

1 1Z\v (sw) 1Z\x C\v (sw) 1 (sw) 1Z\v 1Z\x 2 (sw) C\v (sw) 1 (d) 1Z\v 1Z\x (sw) 2 (sw) 2Z\x (sw) C\v (sw) 1 1Z\v (sw) 1Z\x 2 2Z\x 3 2 (sw) 2Z\x (sw) 3 (sw) 4 (sw) 1 (sw) 1Z\x (sw) 2 2Z\x 3 4 5 2 (sw) 3 (sw) 4 5 (sw) 6 2 (sw) 3 (sw) 4 (sw) 5 (sw) 6 (sw) 8 (sw)

Reducing Tee No. 29T with Threaded Branch Price Each Aprx. Wgt. Each Lbs Painted Galv. 1.0 + + 1.3 + + 1.5 + + 1.5 + + 1.7 + + 2.5 $313.00 $388.50 2.7 313.00 396.00 2.9 313.00 396.00 3.0 313.00 396.00 3.5 377.00 429.50 3.8 377.00 470.50 3.8 383.50 427.50 3.9 397.50 482.50 4.5 556.00 661.00 5.9 601.00 638.50 6.1 321.00 415.50 6.3 500.50 620.00 6.5 500.50 620.00 6.2 500.50 614.00 6.4 500.50 620.00 7.2 797.50 838.00 7.8 475.00 600.00 8.5 475.00 1410.50 9.2 475.00 633.00 11.2 475.00 633.00 11.4 550.00 720.00 11.6 550.00 723.50 14.5 1105.50 1002.00 15.2 777.00 1021.50 16.6 1105.50 1021.50 16.7 1105.50 1081.00 23.0 1086.00 1412.50 25.0 1086.00 1412.50 21.6 1086.00 1412.50 21.4 1086.00 1410.50 26.5 1086.00 1456.00 25.0 1105.50 1464.50 23.2 1105.50 1450.00 33.5 1505.00 1990.00 33.6 1505.00 1990.00 41.8 2106.00 2737.50 34.0 2106.00 2668.50 42.3 2106.00 2743.50 62.0 2171.50 2971.50 60.0 2442.50 3058.00 61.0 2513.00 3146.00 52.0 2974.00 3547.50 59.0 2974.00 3359.50 64.7 + +

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. Available with British Standard Pipe Threads (BSPT). Contact Victaulic for details. (sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel. + Quoted on application. Contact Victaulic for pricing and availability.

1-40

VICTAULIC.COM PL2016-GENERAL-C


Grooved IPS Pipe Couplings No. 29T Threaded Reducing Tee

Reducing Tee with Threaded Branch Refer to publication 07.01

No. 29T

12

Size Inches Run x Branch x 12 x

3 (sw) 4 (sw) 5 (sw) 6 (sw) 8 (sw) 10 (sw)

Reducing Tee No. 29T with Threaded Branch Price Each Painted Galv. $2742.00 $3882.00 2532.00 3701.50 + + 2742.00 3882.00 + + + +

Aprx. Wgt. Each Lbs 80.0 82.0 75.0 75.0 80.0 84.0

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. Available with British Standard Pipe Threads (BSPT). Contact Victaulic for details. (sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.

SECTION 1 GROOVED IPS PIPE COUPLINGS

VICTAULIC.COM PL2016-GENERAL-C

1-41


Grooved IPS Pipe Couplings No. 50 Concentric Reducer, No. 51 Eccentric Reducer

Reducers

REDUCERS – CONCENTRIC OR ECCENTRIC *

Size

Refer to publication 07.01

Inches C\v x 1 C\v 1Z\x x 1 1Z\v C\v 2 x 1 1Z\v 1Z\x C\v 2Z\x x 1 1Z\v 1Z\x 2 C\v 3 x 1Z\v

No. 50

SECTION 1 GROOVED IPS PIPE COUPLINGS

No. 51

3Z\x 4

x x

5

x

1 1Z\v 1Z\x 2 2Z\x 3 1 1Z\v 1Z\x 2 2Z\x 3 3Z\x 2 2Z\x 3 4

Concentric Reducer No. 50 Aprx. Price Each Wgt. Ea. Lbs Painted Galv. 1.9 $505.50 $529.50 1.9 505.50 579.50 1.4 505.50 579.50 0.8 83.00 105.00 1.0 83.00 105.00 0.9 149.50 189.50 0.7 83.00 105.00 1.2 83.00 105.00 1.0 83.00 105.00 1.3 551.00 641.50 1.1 127.50 157.50 3.3 95.50 125.00 3.6 83.00 104.50 3.9 83.00 105.00 1.5 + + 1.3 128.00 157.50 1.4 129.50 155.50 5.1 117.00 196.50 1.6 117.00 143.50 1.8 117.00 147.00 2.0 122.00 155.50 3.0 225.00 277.50 4.6 1272.50 1367.00 2.6 (sw) 187.00 231.00 2.4 187.00 231.00 2.7 187.00 231.00 3.2 187.00 232.50 2.9 187.00 234.00 9.0 (sw) 2012.50 2118.00 4.3 301.50 383.00 5.0 301.50 383.00 4.3 301.50 377.50

Eccentric Reducer No. 51 Aprx. Price Each Wgt. Ea. Lbs Painted Galv. 3.2 + + 3.2 + + 4.5 + + 4.5 (sw) $1010.50 $1065.00 4.5 973.50 1145.00 2.0 (sw) 993.00 1123.50 2.3 (sw) 954.00 1090.50 4.6 (sw) + + 1.1 123.50 145.00 3.3 + + 3.5 2218.00 2528.50 1.4 175.50 218.50 3.7 (sw) 861.00 1001.00 4.3 175.50 218.50 4.5 + + 4.8 (sw) 1681.50 + 4.8 1681.50 1788.50 5.1 (sw) 1011.50 1121.50 6.0 212.50 266.00 7.0 212.50 267.00 7.0 (sw) + + 6.5 (sw) + + – – – 8.1 (sw) 2580.50 3040.00 3.3 314.00 394.00 3.4 314.00 394.00 3.5 307.50 399.00 8.0 (sw) + + 5.2 (sw) + + 10.8 (sw) + + 11.1 (sw) 1897.00 2245.50 12.0 445.50 578.50

‡ Concentric and eccentric reducers 14 - 24” are steel and supplied with roll grooves Steel Reducers eccentric and concentric available through 30”. Contact Victaulic for details. Cut grooved fittings are non-cancellable and non-returnable. NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability. (sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.

1-42

VICTAULIC.COM PL2016-GENERAL-C


Grooved IPS Pipe Couplings Reducers

Size

Refer to publication 07.01 6 No. 50

No. 51 8

10

12

14

18

20

24

Eccentric Reducer No. 51 Aprx. Price Each Wgt. Ea. Lbs Painted Galv. 14.5 (sw) + + + + + 14.5 (sw) $4338.00 $5172.00 14.2 (sw) 3228.50 3877.50 15.0 477.00 667.00 17.0 477.00 641.00 17.0 461.50 625.00 22.0 (sw) 5163.50 6043.50 23.0 (sw) 3015.00 3734.50 23.0 (sw) 2800.50 3467.50 24.0 801.50 1072.00 32.0 (sw) 6896.50 8524.50 34.6 0.00 0.00 36.9 (sw) 5769.00 7259.00 21.6 1638.50 2085.00 48.0 (sw) + + 50.0 (sw) 7392.00 9210.50 53.5 (sw) 7228.50 9090.50 57.0 (sw) 5366.50 6798.00 60.0 + + 60.0 + – 65.0 + – 66.0 + – 73.0 + – 73.0 + – 73.0 + – 73.0 + + 91.0 + + 91.0 + + 91.0 + + 91.0 + – 177.0 + + 120.0 + + 149.0 + + 120.0 + + 136.0 + + 142.0 + + 150.0 + + 162.0 + + 162.0 + + 162.0 + +

SECTION 1 GROOVED IPS PIPE COUPLINGS

16

Inches x 1 1Z\x 2 2Z\x 3 4 5 x 3 4 5 6 x 4 5 6 8 x 4 6 8 10 x 6 8 10 12 x 8 10 12 14 x 10 12 14 16 x 10 12 14 16 18 x 10 12 14 16 18

Concentric Reducer No. 50 Aprx. Price Each Wgt. Ea. Lbs Painted Galv. 5.0 $393.00 $501.00 5.5 1561.50 1767.00 6.6 314.00 399.50 6.4 314.00 400.00 6.4 314.00 400.00 6.5 314.00 413.50 6.4 314.00 417.00 9.3 557.00 705.50 10.4 540.00 703.00 11.6 557.00 728.00 11.9 540.00 717.00 19.7 1103.00 1390.50 33.0 5480.00 5853.00 20.0 1103.00 1434.00 22.0 1103.00 1520.50 44.0 + + 24.6 1357.50 1733.50 52.0 1357.50 1826.50 39.0 1357.50 1846.00 65.0 3290.50 + 65.0 3618.50 + 66.0 4299.50 6236.50 68.0 4299.50 6262.00 73.0 4832.00 6620.50 73.0 4659.00 + 73.0 4988.50 6688.50 73.0 4933.00 6710.00 91.0 5591.50 6679.50 91.0 6140.50 7334.50 91.0 6084.50 7633.00 91.0 6303.50 7814.50 110.0 8386.00 10020.50 120.0 8084.50 9660.00 149.0 8824.00 10543.00 120.0 8787.00 10479.50 136.0 9177.50 12181.00 142.0 11070.50 13229.00 150.0 10413.00 12442.00 162.0 10632.00 + 162.0 10730.50 + 162.0 11399.00 13623.00

‡ Concentric and eccentric reducers 14 - 24” are steel and supplied with roll grooves Steel Reducers eccentric and concentric available through 30”. Contact Victaulic for details. Cut grooved fittings are non-cancellable and non-returnable. NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability. (sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.

VICTAULIC.COM PL2016-GENERAL-C

1-43


Grooved IPS Pipe Couplings No. W50 AGS Concentric Reducer, No. W51 AGS Eccentric Reducer

AGS Reducers

AGS REDUCERS – CONCENTRIC OR ECCENTRIC *

Size

Refer to publication 20.05 VICTAULIC No.W50

Inches x 6 8 10 * 12 * 16 x 8 10 12 * 14 * 18 x 10 12 14 * 16 * 20 x 12 14 16 * 18 * 24 x 16 18 * 20 * 26 x 14 16 18 20 22 24 28 x 14 16 18 20 22 24 26 30 x 14 16 18 20 22 24 26 28 14

No. W50

VICTAULIC No.W51

SECTION 1 GROOVED IPS PIPE COUPLINGS

No. W51

AGS Concentric Reducer No. W50 Aprx. Price Each Wgt. Ea. Lbs Painted Galv. 56.0 $7442.00 $8057.50 58.6 4233.00 4865.50 60.4 3123.50 3940.00 63.4 3123.50 5377.00 71.6 6506.00 7519.00 73.8 5631.00 6675.50 75.6 3297.50 4225.50 77.5 3297.50 4239.50 85.0 9316.50 10672.50 88.1 8536.50 9402.50 90.9 4338.50 5546.50 94.0 4338.50 5678.00 130.0 8526.00 9972.00 134.0 7594.50 9076.00 138.0 5552.50 7275.00 142.0 5552.50 7300.50 159.0 13532.50 16708.50 163.0 11277.00 13923.50 167.0 11277.00 14072.50 167.0 + + 173.0 + + 179.0 + + 185.0 + + 192.0 + + 199.0 + + 180.0 + + 185.0 + + 190.0 + + 196.0 + + 202.0 + + 208.0 + + 216.0 + + 192.0 + + 197.0 + + 202.0 + + 207.0 + + 213.0 + + 218.0 + + 225.0 + + 232.0 + +

AGS Eccentric Reducer No. W51 Aprx. Price Each Wgt. Ea. Lbs Painted Galv. 60.0 $8447.50 $8959.50 60.0 6028.50 6571.00 60.4 3610.00 4502.50 63.4 3610.00 4513.50 73.0 9023.00 + 73.0 6855.00 + 75.6 3835.00 4825.00 77.5 3835.00 4868.50 91.0 + + 91.0 9572.00 10859.50 90.9 5188.00 6498.50 94.0 5188.00 6614.50 130.0 12683.50 + 134.0 10674.00 + 138.0 6767.50 8600.00 142.0 6767.50 8739.50 159.0 + + 163.0 11502.50 14227.00 167.0 11502.50 14227.00 159.0 + + 167.0 + + 175.0 + + 183.0 + + 191.0 + + 199.0 + + 167.0 + + 175.0 + + 183.0 + + 191.0 + + 199.0 + + 207.0 + + 215.0 + + 175.0 + + 183.0 + + 191.0 + + 199.0 + + 207.0 + + 215.0 + + 223.0 + + 232.0 + +

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability. NOTE: AGS products must NOT be used on pipe that has been grooved using Original Groove System (OGS) roll sets. * Single and double reduction concentric and eccentric reducers 14 - 24” are cast ductile iron and supplied with AGS roll grooves, all others made of segmentally welded steel supplied with AGS roll grooves. Steel reducers with the same E to E dimensions may be substituted to meet delivery requirements.

1-44

VICTAULIC.COM PL2016-GENERAL-C


Grooved IPS Pipe Couplings AGS Reducers

Size

Refer to publication 20.05 VICTAULIC No.W50

No. W50

VICTAULIC No.W51

No. W51

AGS Eccentric Reducer No. W51 Aprx. Price Each Wgt. Ea. Lbs Painted Galv. 282.0 + + 292.0 + + 303.0 + + 314.0 + + 324.0 + + 335.0 + + 346.0 + + 356.0 + + 316.0 + + 326.0 + + 337.0 + + 346.0 + + 357.0 + + 367.0 + + 378.0 + + 399.0 + + 327.0 + + 337.0 + + 348.0 + + 359.0 + + 369.0 + + 378.0 + + 389.0 + + 410.0 + + 432.0 + + 419.0 + + 431.0 + + 444.0 + + 456.0 + + 469.0 + + 481.0 + + 504.0 + + 516.0 + + 529.0 + + 542.0 + +

SECTION 1 GROOVED IPS PIPE COUPLINGS

Inches x 16 18 20 22 24 26 28 30 40 x 20 22 24 26 28 30 32 36 42 x 20 22 24 26 28 30 32 36 40 46 x 22 24 26 28 30 32 36 38 40 42 32

AGS Concentric Reducer No. W50 Aprx. Price Each Wgt. Ea. Lbs Painted Galv. 320.0 + + 325.0 + + 330.0 + + 336.0 + + 342.0 + + 348.0 + + 355.0 + + 363.0 + + 365.0 + + 369.0 + + 373.0 + + 377.0 + + 382.0 + + 387.0 + + 393.0 + + 407.0 + + 386.0 + + 390.0 + + 393.0 + + 397.0 + + 401.0 + + 405.0 + + 409.0 + + 421.0 + + 438.0 + + 479.0 + + 485.0 + + 490.0 + + 496.0 + + 502.0 + + 508.0 + + 523.0 + + 531.0 + + 540.0 + + 550.0 + +

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability. NOTE: AGS products must NOT be used on pipe that has been grooved using Original Groove System (OGS) roll sets. * Single and double reduction concentric and eccentric reducers 14 - 24� are cast ductile iron and supplied with AGS roll grooves, all others made of segmentally welded steel supplied with AGS roll grooves. Steel reducers with the same E to E dimensions may be substituted to meet delivery requirements.

VICTAULIC.COM PL2016-GENERAL-C

1-45


Grooved IPS Pipe Couplings AGS Reducers

Size

Refer to publication 20.05 VICTAULIC No.W50

No. W50

VICTAULIC No.W51

SECTION 1 GROOVED IPS PIPE COUPLINGS

No. W51

Inches x 24 26 28 30 32 36 38 40 42 46 54 x 28 30 32 36 38 40 42 46 48 56 x 28 30 32 36 38 40 42 46 48 54 60 x 30 32 36 38 40 42 46 48 54 56 48

AGS Concentric Reducer No. W50 Aprx. Price Each Wgt. Ea. Lbs Painted Galv. 507.0 + + 513.0 + + 518.0 + + 523.0 + + 529.0 + + 541.0 + + 548.0 + + 557.0 + + 565.0 + + 586.0 + + 1015.0 + + 1035.0 + + 1054.0 + + 1095.0 + + 1116.0 + + 1138.0 + + 1158.0 + + 1202.0 + + 1224.0 + + 1081.0 + + 1101.0 + + 1122.0 + + 1164.0 + + 1185.0 + + 1207.0 + + 1228.0 + + 1273.0 + + 1296.0 + + 1368.0 + + 1241.0 + + 1263.0 + + 1307.0 + + 1330.0 + + 1353.0 + + 1376.0 + + 1423.0 + + 1447.0 + + 1521.0 + + 1547.0 + +

AGS Eccentric Reducer No. W51 Aprx. Price Each Wgt. Ea. Lbs Painted Galv. 444.0 + + 456.0 + + 467.0 + + 481.0 + + 494.0 + + 516.0 + + 529.0 + + 542.0 + + 554.0 + + 579.0 + + 974.0 + + 998.0 + + 1022.0 + + 1070.0 + + 1095.0 + + 1119.0 + + 1143.0 + + 1191.0 + + 1215.0 + + 1035.0 + + 1060.0 + + 1085.0 + + 1135.0 + + 1160.0 + + 1186.0 + + 1211.0 + + 1261.0 + + 1286.0 + + 1361.0 + + 1190.0 + + 1217.0 + + 1270.0 + + 1297.0 + + 1324.0 + + 1351.0 + + 1404.0 + + 1431.0 + + 1512.0 + + 1538.0 + +

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability. NOTE: AGS products must NOT be used on pipe that has been grooved using Original Groove System (OGS) roll sets. * Single and double reduction concentric and eccentric reducers 14 - 24� are cast ductile iron and supplied with AGS roll grooves, all others made of segmentally welded steel supplied with AGS roll grooves. Steel reducers with the same E to E dimensions may be substituted to meet delivery requirements.

1-46

VICTAULIC.COM PL2016-GENERAL-C


Grooved IPS Pipe Couplings No. 850 and No. 850H Concentric Reducer

Concentric Reducer Refer to publication 100.01

No. 850 and No. 850H

NO. 850 CONCENTRIC REDUCER

No. 850 Sch. 40

Nom. Size Inches 2Z\x x 2 3 x 2 2Z\x 4 x 2 2Z\x 3 6 x 2Z\x 3 4 8 x 4 6

Aprx. Wgt. Each Lbs 3.7 4.5 5.1 6.4 6.9 7.4 12.2 12.9 14.2 20.4 23.8

No. 850H Sch. 80 Price Each $174.00 176.50 208.50 203.00 251.00 251.00 538.50 489.00 691.00 814.00 1034.50

Aprx. Wgt. Each Lbs 5.0 6.2 7.1 9.1 9.9 10.6 18.8 19.9 21.9 31.7 36.9

Price Each $217.50 219.50 261.50 254.50 313.00 313.00 672.50 610.50 864.50 1019.00 1293.00

No. 851 and No. 851H Eccentric Reducer

Eccentric Reducer Refer to publication 100.01

No. 851 Sch. 40

Nom. Size Inches 2Z\x x 2 3 x 2 2Z\x 4 x 2 2Z\x 3 6 x 2Z\x 3 4 8 x 4 6

Aprx. Wgt. Each Lbs 3.7 4.5 5.1 6.4 6.9 7.4 12.2 12.9 14.2 20.4 23.8

No. 851H Sch. 80 Price Each $360.50 410.00 410.00 500.50 500.50 500.50 1193.00 1094.50 1266.50 1954.00 2046.00

Aprx. Wgt. Each Lbs 5.0 6.2 7.1 9.1 9.9 10.6 18.8 19.9 21.9 31.7 36.9

Price Each $450.50 513.00 513.00 625.50 625.50 625.50 1490.00 1367.50 1581.00 2442.00 2558.00

VICTAULIC.COM PL2016-GENERAL-C

SECTION 1 GROOVED IPS PIPE COUPLINGS

No. 851 and No. 851H

NO. 851 ECCENTRIC REDUCER

1-47


Grooved IPS Pipe Couplings No.(s) 53, 54 and 55 Swaged Nipples

Swaged Nipples

SWAGED NIPPLES

Refer to publication 07.01

No. 53 Grooved x Grooved

No. 54 Grooved x Threaded

No. 55 Threaded x Grooved

Nominal Size Inches 2 x 1 1Z\v 1Z\x 2Z\x x 1 1Z\v 1Z\x 2 3 x 1 1Z\v 1Z\x 2 2Z\x 3Z\x x 3 4 x 1 1Z\v 1Z\x 2

Aprx. Wgt. Ea. Lbs 2.0 2.0 2.0 3.0 3.0 3.0 3.0 4.5 4.5 4.5 4.5 4.6 6.8 7.5 7.5 7.5 7.5

Steel Swaged Nipples No. 53, 54, 55 Plated Price Each $656.50 656.50 554.00 797.50 797.50 797.50 654.00 1155.50 1155.50 1070.00 747.00 747.00 + 1608.00 1543.50 1543.50 1278.00

Nominal Size Inches 4 x 2Z\x 3 3Z\x 5 x 2 3 4 6 x 1 1Z\v 1Z\x 2 2Z\x 3 3Z\x 4 4Z\x 5 8 x 6

Aprx. Wgt. Ea. Lbs 7.5 7.5 7.5 11.5 11.5 11.5 17.0 17.0 17.2 17.4 17.4 17.4 17.4 17.5 17.5 17.5 20.0

Steel Swaged Nipples No. 53, 54, 55 Plated Price Each $1278.00 1087.00 + 4268.50 3135.00 2976.50 7355.50 7355.50 5732.00 5732.00 5732.00 4083.50 + 3373.50 + 3373.50 4698.00

SECTION 1 GROOVED IPS PIPE COUPLINGS

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

1-48

+ Quoted on application. Contact Victaulic for pricing and availability.

No. 52 – Reducer Threaded Small End

VICTAULIC.COM PL2016-GENERAL-C


Grooved IPS Pipe Couplings Reducer Threaded Small End Refer to publication 07.01

No. 52

REDUCER THREADED SMALL END

Nominal Size Inches Inlet x Outlet 1Z\x x 1 1Z\v C\v 2 x 1 1Z\v 1Z\x 2Z\x x 1 1Z\v 1Z\x 2 C\v 3 x

x

5 6

x x

Lbs 0.8 0.9 0.9 0.7 1.2 1.0 1.1 1.2 (sw) 1.3 (sw) 1.4 1.5 (sw) 1.3 1.5 1.5 1.5 2.4 (sw) 2.3 2.7 2.6 2.6 2.5 4.5 5.5 5.7 5.8 5.8 6.5 (sw) 2.0 (sw)

Price Each Painted $157.50 86.00 173.50 173.50 173.50 173.50 230.00 203.00 203.00 203.00 + 234.00 259.50 259.50 259.50 286.50 242.50 273.50 273.50 305.00 305.00 1695.50 475.00 475.00 333.50 592.50 1803.00 1943.50

Galv. $182.50 112.00 201.50 202.00 203.50 202.00 279.50 241.50 241.50 241.50 + 273.50 301.00 305.00 305.00 337.50 294.50 326.50 330.00 364.00 363.50 1840.50 582.50 584.50 424.00 714.50 2074.50 +

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability.

SECTION 1 GROOVED IPS PIPE COUPLINGS

4

1 1Z\v 1Z\x 2 2Z\x 1 1Z\x 2 2Z\x 3 4 1 2 2Z\x 3 4 5

Aprx. Wgt. Ea.

Available with British Standard Pipe Threads (BSPT). Contact Victaulic for details. (sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.

VICTAULIC.COM PL2016-GENERAL-C

1-49


Grooved IPS Pipe Couplings No. 30 Lateral

Lateral Refer to publication 07.01

LATERAL

Nom. Size Inches C\v 1 1Z\v 1Z\x 2 2Z\x 3 3Z\x 4 5 6 8 10 12

No. 30

Aprx. Wgt. Ea. Lbs 1.0 (sw) 1.7 (sw) 2.5 3.5 (sw) 4.6 (sw) 9.0 (sw) 11.7 17.8 (sw) 17.9 21.8 (sw) 43.6 (sw) 72.0 (sw) 105.0 (sw) 165.0 (sw)

45째 Lateral No. 30 Price Each Painted $238.00 + 259.50 301.00 392.50 468.00 646.50 + 700.50 1492.00 1784.50 2811.50 3940.00 5259.50

Galv. $269.50 + 340.50 415.00 481.00 609.50 834.00 + 989.50 1875.50 2403.50 3816.50 5351.50 7366.00

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability. (sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.

AGS Lateral Refer to publication 20.05

VICTAULIC No.W30

SECTION 1 GROOVED IPS PIPE COUPLINGS

No. W30 AGS Lateral

No. W30

AGS LATERAL

Nom. Size Inches 14 16 18 20 24

Aprx. Wgt. Ea. Lbs 276.0 344.2 429.0 500.0 715.0

AGS 45째 Lateral No. W30 Price Each Painted $5707.00 7148.00 10916.00 13052.50 19989.00

Galv. $11918.50 14888.00 20570.00 24304.00 36077.50

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. NOTE: AGS products must NOT be used on pipe that has been grooved using Original Groove System (OGS) roll sets. * Victaulic fittings listed are made of segmentally welded steel.

1-50

VICTAULIC.COM PL2016-GENERAL-C


Grooved IPS Pipe Couplings No. 60 Cap

Cap

CAP

Nom. Size

Refer to publication 07.01

Inches C\v No. 60

1 1Z\v 1Z\x 2 2Z\x 3 3Z\x 4 5 6 8 10 12

Cap No. 60 Aprx. Wgt. Ea. Lbs 0.2 0.3 0.3 0.5 0.6 1.0 1.4 2.5 2.5 4.6 6.0 13.1 21.0 35.6

Price Each Painted $73.50 73.50 73.50 73.50 73.50 73.50 90.50 143.00 108.00 214.00 232.50 366.00 600.00 1510.00

Galv. $95.00 95.00 95.00 95.00 95.00 95.00 117.00 181.00 146.50 297.00 339.00 543.50 875.00 1968.00

Caps can be tapped Z\x or C\v -inch. Contact Victaulic. NOTE: Items listed in shaded areas are non-cancellable and non-returnable. Caps are malleable/ductile iron.

No. W60 AGS Cap

VICTAULIC No.W60

Refer to publication 20.05

No. W60

AGS CAP

Nom. Size Inches 14 16 18 20 24 26 28 30 32 36 40 42 46 48 54 56 60

Aprx. Wgt. Ea. Lbs 33.2 41.2 54.6 67.5 96.0 144.0 166.0 187.0 209.0 253.0 391.0 420.0 532.0 613.0 785.0 875.0 977.0

AGS Cap No. W60 Price Each Painted $2656.00 3506.50 4403.00 6214.50 7186.00 + + + + + + + + + + + +

Galv. $3219.00 4198.50 5303.50 7529.50 8699.00 + + + + + + + + + + + +

SECTION 1 GROOVED IPS PIPE COUPLINGS

AGS Cap

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. NOTE: AGS products must NOT be used on pipe that has been grooved using Original Groove System (OGS) roll sets. + Quoted on application. Contact Victaulic for pricing and availability.

VICTAULIC.COM PL2016-GENERAL-C

1-51


Grooved IPS Pipe Couplings No. 860 and No. 860H Cap

Cap Refer to publication 100.01

NO. 860 CAP

No. 860 Sch. 40

Nominal Aprx. Wgt. Ea. Lbs. 1.6 2.3 3.4 5.3 11.2 18.9

Inches 2 2Z\x 3 4 6 8

No. 860H Sch. 80 Aprx. Wgt. Ea. Lbs. 2.3 3.1 4.7 7.5 17.4 29.4

Price Each $126.50 126.50 126.50 135.00 313.00 595.50

Price Each $159.50 159.50 159.50 168.00 391.50 742.00

No. 860 and No. 860H

No. 61 Bull Plug

Bull Plugs Refer to publication 07.01

SECTION 1 GROOVED IPS PIPE COUPLINGS

No. 61

1-52

ELECTROPLATED STEEL BULL PLUGS

Electroplated Steel Bull Plug No. 61

Nom. Size Inches 2 2Z\x 3 4 5 6

Aprx. Wgt. Ea. Lbs 2.0 3.0 4.5 7.5 12.0 17.0

Price Each $388.50 533.00 764.00 962.50 1566.00 3182.50

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. Other sizes available upon request. Contact Victaulic for details.

VICTAULIC.COM PL2016-GENERAL-C


Grooved IPS Pipe Couplings No. 30R Reducing Lateral

Reducing Laterals

REDUCING LATERALS

Nominal Size

Refer to publication 07.01

Inches 3 x

3

x

4

x

4

x

5

x

5

x

6

x

6

x

8

x

8

x

10

x

10

x

12

x

12

x

No. 30R

Reducing Laterals No. 30R † Price Each Painted $720.00 720.00 812.50 917.00 1018.00 1003.50 1249.00 1403.00 1411.00 1568.00 1755.00 2222.50 2439.00 2593.00 2844.00 + 3222.00 3395.00 3892.50 + 4029.00 4363.50 4996.50

Galv. $839.00 901.00 1007.50 1126.00 1316.00 1443.00 1663.50 1829.50 1939.00 2111.00 2399.50 3089.50 3465.00 3698.50 4163.00 4361.00 4599.50 5188.50 5604.50 5628.50 5791.50 6262.50 7156.50

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability. † All No. 30R fittings are segmentally welded steel.

VICTAULIC.COM PL2016-GENERAL-C

SECTION 1 GROOVED IPS PIPE COUPLINGS

2 2Z\x 2 2Z\x 3 2 3 4 3 4 5 4 5 6 4 5 6 8 4 5 6 8 10

Aprx. Wgt. Each Lbs 9.8 9.8 10.0 10.0 18.3 24.0 27.0 26.5 37.0 36.5 44.7 62.0 75.5 82.0 104.8 99.0 105.8 118.0 135.0 122.0 137.0 147.0 167.0

1-53


Grooved IPS Pipe Couplings No. W30R AGS Reducing Lateral

AGS Reducing Laterals

AGS REDUCING LATERALS

Nominal Size

Refer to publication 20.05

SECTION 1 GROOVED IPS PIPE COUPLINGS

No. W30R

1-54

Inches 14 x

14

x

16

x

16

x

18

x

18

x

20

x

20

x

24

x

24

x

4 6 8 10 12 6 8 10 12 14 6 8 10 12 14 16 12 14 16 16 18 20

Aprx. Wgt. Each Lbs 162.4 167.6 173.5 181.0 189.2 206.7 213.1 221.1 229.9 230.9 253.1 259.9 285.0 277.6 278.7 284.3 330.0 331.2 337.2 448.5 515.0 461.8

AGS Reducing Lateral No. W30R † Price Each Painted + $3682.00 4585.50 4411.00 4333.50 + + 7248.00 7599.00 7614.00 + + + 5519.50 6709.00 6794.50 + + + + + +

Galv. + $5292.50 6274.50 6177.00 6180.50 + + 9379.00 9807.50 9872.00 + 7780.00 8001.50 8169.50 9413.00 9585.50 + + + + + +

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability. NOTE: AGS products must NOT be used on pipe that has been grooved using Original Groove System (OGS) roll sets. † All No. W30R fittings are segmentally welded steel.

VICTAULIC.COM PL2016-GENERAL-C


Grooved IPS Pipe Couplings No. 32 Tee Wyes

Tee Wyes

TEE WYES

Nominal Size

Refer to publication 07.01

No. 32

x x x x x

Inches 2 2Z\x 3 3Z\x 4

x x x x x

5

x

5

x

6

x

6

x

8

x

8

x

10

x

10

x

12

x

12

x

2 2Z\x 3 3Z\x 3 4 3 4 5 3 4 5 6 3 4 5 6 8 3 4 5 6 8 10 12

Tee Wye No. 32 † Price Each Painted $804.50 1025.50 1314.50 + 1390.00 1760.50 1609.00 1973.50 2656.00 1762.50 2133.50 2841.00 2952.50 + 2755.00 3491.50 3640.50 4613.50 2961.00 3414.50 4247.50 4197.50 5146.50 6836.00 9436.50

Galv. $960.50 1256.00 1626.50 + 1768.50 2304.50 2031.00 2504.00 3350.50 2343.50 2806.00 3684.50 3864.00 + 3788.50 4697.00 4189.00 6338.50 4110.50 4581.50 5547.50 5883.50 7149.50 9242.00 12530.50

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability. † All No. 32 fittings are segmentally welded steel.

SECTION 1 GROOVED IPS PIPE COUPLINGS

2 2Z\x 3 3Z\x 4

Aprx. Wgt. Each Lbs 6.4 11.5 14.3 22.9 23.0 26.0 29.0 36.7 48.0 37.3 46.3 55.0 60.5 76.0 76.4 85.6 112.0 127.1 96.0 97.4 115.1 133.1 156.0 190.0 240.0

No. 36B VicBlast™ Nozzle

VicBlast™ Nozzle

VICBLAST NOZZLE

Nominal Size Inches Air 1

Water C\, FPT

Aprx. Wgt. Each Lbs 1.60

Price Each Endurion Coated $142.00

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

No. 36B

VICTAULIC.COM PL2016-GENERAL-C

1-55


Grooved IPS Pipe Couplings No. 48 Hose Nipples

Hose Nipples Refer to publication 07.01

STEEL HOSE NIPPLES

Inches C\v

No. 48

2 2

4

SECTION 1 GROOVED IPS PIPE COUPLINGS

Length Inches

Nom. Size

1 1Z\v 1Z\x 2 x 1Z\x x Z\x 2 2Z\x 3 4 x 3 4 5 6 8 10 12

End to End 3.25 3.25 3.63 4.00 4.63 4.63 6.00 6.00 5.50 6.00 7.25 7.25 17.38 9.75 11.00 12.50 14.00 16.00

Barb 1.625 1.625 1.859 2.125 2.500 3.750 3.500 1.875 2.875 3.250 3.875 3.250 14.000 5.375 6.500 7.750 8.500 10.125

Steel Hose Nipple No. 48 Aprx. Wgt. Ea. Price Each Lbs Plated 0.3 $130.00 0.4 130.00 0.6 162.00 0.8 173.00 1.1 208.00 0.9 274.00 1.2 338.00 1.4 287.00 2.0 310.00 3.2 371.00 4.9 637.50 4.1 2456.00 5.7 1163.50 8.0 896.50 14.3 1459.00 24.7 3193.00 40.1 4813.00 62.0 +

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability.

No(s). 45 and 46 Flanged Adapter Nipples

Flanged Adapter Nipples Refer to publication 07.01

Nos. 45 & 46

FLANGED ADAPTER NIPPLES – NO. 45 – 150 LB AND NO. 46 – 300 LB

Size x Length Inches C\v x 3 1 x 3 1 x 4 1Z\v x 4 1Z\x x 4 2 x 4 2Z\x x 4 3 x 4 3Z\x x 4 4 x 6 5 x 6 6 x 6 8 x 6 10 x 8 12 x 8

No. 45 – 150 lb Black Galv. + + $533.00 $624.50 + + 556.00 654.00 557.00 656.50 567.00 694.00 765.50 941.50 777.00 969.50 952.00 + 1123.00 1432.50 1616.50 2014.50 1641.50 2103.50 2172.00 2852.50 2884.00 4017.00 4027.00 7587.50

No. 46 – 300 lb Black Galv. + + + + + + + + $1199.50 + 675.00 $837.00 932.50 1162.50 948.50 1218.00 + + 1409.50 2633.50 2119.00 + 2168.00 2907.50 3018.00 4067.50 4254.50 + 9445.00 10510.00

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability.

1-56

VICTAULIC.COM PL2016-GENERAL-C


Grooved IPS Pipe Couplings No. W45R AGS Flanged Adapter Nipple

AGS Flanged Adapter Nipple

AGS FLANGED ADAPTER NIPPLES – ANSI 150

Size x Length

Aprx. Wgt. Ea.

Refer to publication 20.05

No. W45R

14 16 18 20 24 26 28 30 32 36 40 42 46 48 54 56 60

Inches x 8 x 8 x 8 x 8 x 8 x 12 x 12 x 12 x 12 x 12 x 12 x 12 x 12 x 12 x 16 x 16 x 16

Lbs 122.0 136.0 168.0 208.0 274.0 254.0 262.0 270.0 278.0 340.0 361.0 372.0 393.0 404.0 372.0 393.0 404.0

AGS Flanged Adapter Nipple – No. W45R * Price Each Painted Galv. $3969.00 $5179.50 4527.50 5887.50 5796.50 7523.00 7314.00 9456.00 9296.00 12060.50 + + + + + + + + + + + + + + + + + + + + + + + +

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. NOTE: AGS products must NOT be used on pipe that has been grooved using Original Groove System (OGS) roll sets. + Quoted on application. Contact Victaulic for pricing and availability.

No(s). 845F Flat Face and 845R Raised Face ANSI Class 150 Flanged Adapter Nipples

Flanged Adapter Nipples

FLANGED ADAPTER NIPPLES – ANSI CLASS 150 AND CLASS 300

Nom. Size

Refer to publication 100.01 Inches 2 2Z\x 3 4 6 8

ANSI Class 150 Flange Adapter Nipple Aprx. Wgt. Ea. Price Each No. 845F No. 845R Lbs Flat Face Raised Face 6.8 + $621.50 9.3 + 1240.00 11.7 + 1270.50 17.5 + 1447.50 28.3 + 2039.00 46.1 + 2524.00

ANSI Class 300 Flange Adapter Nipple Aprx. Wgt. Ea. Price Each No. 846F No. 846R Lbs Flat Face Raised Face 9.6 + $763.50 12.6 + 905.50 16.2 + 1059.00 24.8 + 1991.00 43.7 + 2187.00 71.6 + 4168.50

SECTION 1 GROOVED IPS PIPE COUPLINGS

* Raised face flanges are standard; flat flanges are quoted on application.

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability.

No. 845

* Raised face flanges are standard; flat flanges are quoted on application.

No. 846

VICTAULIC.COM PL2016-GENERAL-C

1-57


Grooved IPS Pipe Couplings 3D Cast Bends for Abrasive Services

3D Cast Bend

3D CAST BENDS – 90° BEND OR 45° BEND

Fitting Size

FOR ABRASIVE SERVICES

Refer to publication 07.01

90° Cast Bend No. 100 – 3D

Inches 2 3 4 6

Aprx. Wgt. Ea. Lbs 5.0 16.0 22.5 70.0

90° Bend Center to End Inches 10.00 13.00 16.00 24.00

Price Each $805.50 1291.00 2963.50 5609.50

Aprx. Wgt. Ea. Lbs 4.7 10.4 17.2 45.0

45° Bend Center to End Inches 6.50 7.75 9.00 13.50

Price Each $779.50 1158.50 1477.50 3136.50

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

SECTION 1 GROOVED IPS PIPE COUPLINGS

45° Cast Bend No. 110 – 3D

1-58

VICTAULIC.COM PL2016-GENERAL-C


Grooved IPS Pipe Couplings Long Radius Bends – 3D

3D Long Radius Steel Bends

3D LONG RADIUS BENDS – 90° BEND, 60° BEND, OR 45° BEND

Nom. Size

Refer to publication 07.02

No. 100-3D 90° Bend

No. 14-3D 60° Bend

No. 110-3D 45° Bend

Inches 2 2Z\x 3 3Z\x 4 4Z\x 5 6 8 10 12 14 † 15 † 16 † 18 † 20 † 22 † 24 †

90° Bend No. 100-3D Aprx. Wgt. Ea. Lbs Price Each 5.3 + 9.5 + 14.0 + 18.6 + 24.1 + 31.6 + 40.9 + 63.7 + 127.8 + 226.4 + 332.7 + 427.3 + – + 560.1 + 710.7 + 879.3 + – + 1270.3 +

60° Bend No. 14-3D Aprx. Wgt. Ea. Lbs Price Each 4.3 + 7.7 + 11.0 + 14.4 + 18.5 + 24.2 + 31.3 + 48.8 + 97.9 + 173.4 + 254.8 + 327.3 + – + 429.0 + 544.4 + 673.5 + – + 973.0 +

45° Bend No. 110-3D Aprx. Wgt. Ea. Lbs Price Each 3.9 + 6.7 + 9.5 + 12.3 + 15.7 + 20.5 + 26.5 + 41.3 + 82.9 + 146.9 + 215.9 + 277.3 + – + 363.5 + 461.3 + 570.7 + – + 824.4 +

Also available 76.1 mm and 165.1 mm sizes. Contact Victaulic. † For cut groove systems only. Cut groove systems require the use of Original Groove System (OGS) Style 77 couplings. For roll groove systems, Victaulic offers Advanced Groove System (AGS) elbows. Please contact Victaulic for pricing and availability. + Quoted on application. Contact Victaulic for pricing and availability.

3D LONG RADIUS BENDS – 30° BEND, 22Z\x° BEND, OR 11Z\v° BEND

Nom. Size

No. 15-3D 30° Bend

No. 12-3D 22Z\x° Bend

No. 13-3D 11Z\v° Bend

Inches 2 2Z\x 3 3Z\x 4 4Z\x 5 6 8 10 12 14 † 16 † 18 † 20 † 22 † 24 †

30° Bend No. 15-3D Aprx. Wgt. Ea. Lbs Price Each 3.4 + 5.8 + 7.3 + 10.2 + 12.8 + 16.8 + 21.8 + 33.9 + 68.0 + 120.5 + 177.0 + 227.3 + 297.9 + 378.1 + 467.8 + – + 675.7 +

22Z\x° Bend No. 12-3D Aprx. Wgt. Ea. Lbs Price Each 3.2 + 5.3 + 7.3 + 9.2 + 11.4 + 14.9 + 19.4 + 30.1 + 60.5 + 107.2 + 157.5 + 202.3 + 265.2 + 336.5 + 416.3 + – + 601.4 +

11Z\v° Bend No. 13-3D Aprx. Wgt. Ea. Lbs Price Each 2.8 + 4.6 + 6.2 + 7.6 + 9.3 + 12.2 + 15.8 + 24.6 + 49.3 + 87.3 + 128.3 + 164.8 + 216.0 + 274.1 + 339.2 + – + 490.0 +

SECTION 1 GROOVED IPS PIPE COUPLINGS

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. Also available 76.1 mm and 165.1 mm sizes. Contact Victaulic. † For cut groove systems only. Cut groove systems require the use of Original Groove System (OGS) Style 77 couplings. For roll groove systems, Victaulic offers Advanced Groove System (AGS) elbows. Please contact Victaulic for pricing and availability. + Quoted on application. Contact Victaulic for pricing and availability.

VICTAULIC.COM PL2016-GENERAL-C

1-59


Grooved IPS Pipe Couplings Long Radius Bends – 5D

5D Long Radius Steel Bends

5D LONG RADIUS BENDS – 90° BEND, 60° BEND, OR 45° BEND

Nom. Size

Refer to publication 07.02

No. 100-5D 90° Bend

No. 14-5D 60° Bend

No. 110-5D 45° Bend

Inches 2 2Z\x 3 3Z\x 4 4Z\x 5 6 8 10 12 14 † 15 † 16 † 18 † 20 † 22 † 24 †

90° Bend No. 100-5D Aprx. Wgt. Ea. Lbs Price Each 7.2 + 13.3 + 19.9 + 26.9 + 35.4 + 46.3 + 60.0 + 93.5 + 187.6 + 332.4 + 488.4 + 627.4 + – + 822.2 + 1043.4 + 1290.9 + – + 1864.8 +

60° Bend No. 14-5D Aprx. Wgt. Ea. Lbs Price Each 5.6 + 10.2 + 15.0 + 20.0 + 26.0 + 34.0 + 44.1 + 68.6 + 137.7 + 244.1 + 358.6 + 460.7 + – + 603.8 + 766.2 + 947.9 + – + 1369.3 +

45° Bend No. 110-5D Aprx. Wgt. Ea. Lbs Price Each 4.8 + 8.6 + 12.5 + 16.5 + 21.3 + 27.9 + 36.1 + 56.2 + 112.8 + 199.9 + 293.7 + 377.3 + – + 494.5 + 627.6 + 776.4 + – + 1121.6 +

SECTION 1 GROOVED IPS PIPE COUPLINGS

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. † For cut groove systems only. Cut groove systems require the use of Original Groove System (OGS) Style 77 couplings. For roll groove systems, Victaulic offers Advanced Groove System (AGS) elbows. Please contact Victaulic for pricing and availability. + Quoted on application. Contact Victaulic for pricing and availability.

5D LONG RADIUS BENDS – 30° BEND, 22Z\x° BEND, OR 11Z\v° BEND

Nom. Size

No. 15-5D 30° Bend

No. 12-5D 22Z\x° Bend

No. 13-5D 11Z\v° Bend

Inches 2 2Z\x 3 3Z\x 4 4Z\x 5 6 8 10 12 14 † 16 † 18 † 20 † 24 †

30° Bend No. 15-5D Aprx. Wgt. Ea. Lbs Price Each 4.0 + 7.0 + 10.0 + 13.0 + 16.6 + 21.7 + 28.1 + 43.8 + 87.9 + 155.8 + 228.9 + 627.0 + 385.3 + 489.0 + 605.0 + 873.9 +

22Z\x° Bend No. 12-5D Aprx. Wgt. Ea. Lbs Price Each 3.6 + 6.2 + 8.8 + 11.3 + 14.3 + 18.6 + 24.1 + 37.6 + 75.4 + 133.7 + 196.4 + 252.3 + 330.7 + 419.7 + 519.2 + 750.1 +

11Z\v° Bend No. 13-5D Aprx. Wgt. Ea. Lbs Price Each 3.0 + 5.0 + 6.9 + 8.7 + 10.7 + 14.0 + 18.2 + 28.3 + 56.8 + 100.6 + 147.8 + 189.8 + 248.8 + 315.7 + 390.6 + 564.3 +

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. † For cut groove systems only. Cut groove systems require the use of Original Groove System (OGS) Style 77 couplings. For roll groove systems, Victaulic offers Advanced Groove System (AGS) elbows. Please contact Victaulic for pricing and availability. + Quoted on application. Contact Victaulic for pricing and availability.

1-60

VICTAULIC.COM PL2016-GENERAL-C


Grooved IPS Pipe Couplings Long Radius Bends – 6D

6D Long Radius Steel Bends

6D LONG RADIUS BENDS – 90° BEND, 60° BEND, OR 45° BEND

Nom. Size

Refer to publication 07.02

No. 100-6D 90° Bend

No. 14-6D 60° Bend

No. 110-6D 45° Bend

Inches 2 2Z\x 3 3Z\x 4 4Z\x 5 6 8 10 12 14 † 15 † 16 † 18 † 20 † 22 † 24 †

90° Bend No. 100-6D Aprx. Wgt. Ea. Lbs Price Each 8.2 + 15.2 + 22.9 + 31.1 + 41.1 + 53.7 + 69.6 + 108.4 + 217.5 + 385.4 + 566.2 + 727.4 + – + 953.3 + 1209.7 + 1496.6 + – + 2162.0 +

60° Bend No. 14-6D Aprx. Wgt. Ea. Lbs Price Each 6.3 + 11.4 + 17.0 + 22.8 + 29.8 + 39.0 + 50.5 + 78.6 + 157.7 + 279.4 + 410.5 + 527.4 + – + 691.1 + 877.1 + 1085.1 + – + 1567.5 +

45° Bend No. 110-6D Aprx. Wgt. Ea. Lbs Price Each 5.3 + 9.5 + 14.0 + 18.6 + 24.1 + 31.6 + 40.9 + 63.7 + 127.8 + 226.4 + 332.7 + 427.3 + – + 560.1 + 710.1 + 879.3 + – + 1270.3 +

+ Quoted on application. Contact Victaulic for pricing and availability. † For cut groove systems only. Cut groove systems require the use of Original Groove System (OGS) Style 77 couplings. For roll groove systems, Victaulic offers Advanced Groove System (AGS) elbows. Please contact Victaulic for pricing and availability.

6D LONG RADIUS BENDS – 30° BEND, 22Z\x° BEND, OR 11Z\v° BEND

Nom. Size

No. 15-6D 30° Bend

No. 12-6D 22Z\x° Bend

No. 13-6D 11Z\v° Bend

Inches 2 2Z\x 3 3Z\x 4 4Z\x 5 6 8 10 12 14 † 16 † 18 † 20 † 24 †

30° Bend No. 15-6D Aprx. Wgt. Ea. Lbs Price Each 4.3 + 7.7 + 11.0 + 14.4 + 18.5 + 24.2 + 31.3 + 48.8 + 97.9 + 173.4 + 254.8 + 327.3 + 429.0 + 544.4 + 673.5 + 973.0 +

22Z\x° Bend No. 12-6D Aprx. Wgt. Ea. Lbs Price Each 3.9 + 6.7 + 9.5 + 12.3 + 15.7 + 20.5 + 26.5 + 41.3 + 82.9 + 146.9 + 215.9 + 277.3 + 363.5 + 461.3 + 570.7 + 824.4 +

11Z\v° Bend No. 13-6D Aprx. Wgt. Ea. Lbs Price Each 3.2 + 5.3 + 7.3 + 9.2 + 11.4 + 14.9 + 19.4 + 30.1 + 60.5 + 107.2 + 157.5 + 202.3 + 265.2 + 336.5 + 416.3 + 601.4 +

SECTION 1 GROOVED IPS PIPE COUPLINGS

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability. † For cut groove systems only. Cut groove systems require the use of Original Groove System (OGS) Style 77 couplings. For roll groove systems, Victaulic offers Advanced Groove System (AGS) elbows. Please contact Victaulic for pricing and availability.

VICTAULIC.COM PL2016-GENERAL-C

1-61


Grooved IPS Pipe Couplings XL Fittings and Couplings Style XL100/XL77/XL79 90° – 1Z\x D Elbows and Couplings

90° – 1Z\xD Elbows and Couplings STYLE XL100/XL77/XL79

90° – 1Z\x D ELBOWS AND COUPLINGS

Nom. Size

Refer to publication 07.07

Style XL77 Coupling and XL Fitting

Inches 3 4 5 6 8 10 12

XL100/XL77 System 1 Fitting and 2 Complete Couplings With Grade “E” or “T” Gasket Aprx. Wgt. Ea. Lbs 23.7 37.9 55.5 70.7 93.6 133.2 171.2

Price Each $324.50 472.50 940.00 1064.50 2164.50 4047.00 4346.50

XL100/XL79 System 2 Fittings and 1 Complete Coupling With Grade “E” or “T” Gasket Aprx. Wgt. Ea. Lbs 32.0 50.7 74.5 101.9 189.2 268.3 375.3

Price Each $361.00 531.50 1255.00 1388.50 3127.00 6136.00 6467.00

SPARE PARTS Plated Bolt and Nut Size Inches Z\x x 2C\v B\, x 3Z\v C\v x 4Z\v C\v x 4Z\v M\, x 5 1 x 6 1 x 6Z\x

NOTE: See the Spare Parts section for pricing and availability.

Style XL79 Coupling and XL Fitting NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

Style XL110/XL77/XL79 45° – 1Z\x D Elbows and Couplings

45° – 1Z\xD Elbows and Couplings SECTION 1 GROOVED IPS PIPE COUPLINGS

STYLE XL110/XL77/XL79

45° – 1Z\x D ELBOWS AND COUPLINGS

Nom. Size

Refer to publication 07.07

Style XL77 Coupling and XL Fitting

Inches 3 4 5 6 8 10 12

XL110/XL77 System 1 Fitting and 2 Complete Couplings With Grade “E” or “T” Gasket Aprx. Wgt. Ea. Lbs 19.4 29.8 44.4 61.4 93.6 133.2 171.2

Price Each $307.00 415.00 794.00 903.50 1512.50 3344.00 3845.00

XL110/XL79 System 2 Fittings and 1 Complete Coupling With Grade “E” or “T” Gasket Aprx. Wgt. Ea. Lbs 23.4 34.5 52.3 83.3 116.6 161.9 221.7

Price Each $326.00 416.50 962.00 1065.50 1823.00 4730.00 5464.00

SPARE PARTS Plated Bolt and Nut Size Inches Z\x x 2C\v B\, x 3Z\v C\v x 4Z\v C\v x 4Z\v M\, x 5 1 x 6 1 x 6Z\x

NOTE: See the Spare Parts section for pricing and availability.

Style XL79 Coupling and XL Fitting

Style XL100/XL77/XL79 90° – 3D Elbows and Couplings

90° – 3D Elbows and Couplings STYLE XL100/XL77/XL79

90° – 3D ELBOWS AND COUPLINGS

Nom. Size

Refer to publication 07.07

Style XL77 Coupling and XL Fitting

Inches 3 4 5 6 8 10 12

XL100/XL77 System 1 Fitting and 2 Complete Couplings With Grade “E” or “T” Gasket Aprx. Wgt. Ea. Lbs 35.4 47.8 89.0 122.4 192.6 336.1 526.2

Price Each $693.50 1189.50 1595.50 1952.50 2748.00 3963.00 5431.50

XL100/XL79 System 2 Fittings and 1 Complete Coupling With Grade “E” or “T” Gasket Aprx. Wgt. Ea. Lbs 55.4 70.5 141.5 205.3 314.6 637.9 911.7

Price Each $1099.00 1965.50 2565.50 3165.00 4293.50 5967.50 8636.50

SPARE PARTS Plated Bolt and Nut Size Inches Z\x x 2C\v B\, x 3Z\v C\v x 4Z\v C\v x 4Z\v M\, x 5 1 x 6 1 x 6Z\x

NOTE: See the Spare Parts section for pricing and availability.

Style XL79 Coupling and XL Fitting

1-62

VICTAULIC.COM PL2016-GENERAL-C


Grooved IPS Pipe Couplings Style XL110/XL77/XL79 45° – 3D Elbows and Couplings

45° – 3D Elbows and Couplings

45° – 3D ELBOWS AND COUPLINGS

Nom. Size

STYLE XL110/XL77/XL79

XL110/XL77 System 1 Fitting and 2 Complete Couplings With Grade “E” or “T” Gasket

Refer to publication 07.07

Style XL77 Coupling and XL Fitting

Inches 3 4 5 6 8 10 12

Aprx. Wgt. Ea. Lbs 28.4 44.8 68.4 109.4 158.6 288.2 395.2

Price Each $681.50 1144.00 1550.00 1649.50 2387.50 3754.00 4503.00

XL110/XL79 System 2 Fittings and 1 Complete Coupling With Grade “E” or “T” Gasket Aprx. Wgt. Ea. Lbs 41.4 64.5 100.3 179.3 246.6 471.9 669.7

Price Each $1075.00 1875.00 2475.00 2558.50 3573.00 5550.00 6779.00

SPARE PARTS Plated Bolt and Nut Size Inches Z\x x 2C\v B\, x 3Z\v C\v x 4Z\v C\v x 4Z\v M\, x 5 1 x 6 1 x 6Z\x

NOTE: See the Spare Parts section for pricing and availability.

Style XL79 Coupling and XL Fitting

Style XL100/XL110 90° and 45° 1Z\x D Elbows

90° and 45° 1Z\xD Elbows

90° AND 45° 1Z\x D ELBOWS

Nom. Size

STYLE XL100/XL110 Inches 3 4 5 6 8 10 12

1Z\x D XL110 45° Elbow Aprx. Wgt. Ea. Lbs Price Each 9.0 $115.50 13.0 140.00 20.0 377.50 35.0 409.50 46.0 712.00 63.0 2039.00 90.0 2361.00

3D XL100 90° Elbow Aprx. Wgt. Ea. Lbs Price Each 25.0 $502.00 31.0 914.00 64.6 1179.00 96.0 1459.00 145.0 1946.50 301.0 2658.00 435.0 3947.50

3D XL110 45° Elbow Aprx. Wgt. Ea. Lbs Price Each 18.0 $490.00 28.0 869.00 44.0 1133.50 83.0 1156.50 111.0 1586.50 218.0 2449.00 314.0 3018.50

SECTION 1 GROOVED IPS PIPE COUPLINGS

Refer to publication 07.07

1Z\x D XL100 90° Elbow Aprx. Wgt. Ea. Lbs Price Each 13.3 $133.00 21.1 197.00 31.1 523.50 44.3 571.00 82.3 1363.50 116.2 2742.00 166.8 2863.00

Style XL100/XL110 90° and 45° 3D Elbows

90° and 45° 3D Elbows

90° AND 45° 3D ELBOWS

Nom. Size

STYLE XL100/XL110

Refer to publication 07.07

Inches 3 4 5 6 8 10 12

VICTAULIC.COM PL2016-GENERAL-C

1-63


Grooved IPS Pipe Couplings Style XLXL77/XL79 Couplings

Couplings

XL COUPLINGS

STYLE XL77/XL79

Refer to publication 07.07

Style XL77 Coupling

Nom. Size

Inches 3 4 5 6 8 10 12

XL77 Fitting-to-Pipe Coupling Complete With Grade “E” or “T” Gasket Aprx. Wgt. Ea. Lbs 5.2 8.4 12.2 13.2 23.8 35.1 40.6

XL79 Fitting-to-Fitting Coupling Complete With Grade “E” or “T” Gasket

Price Each $96.50 138.50 209.00 247.50 401.00 653.00 742.50

Aprx. Wgt. Ea. Lbs 5.4 8.5 12.3 13.3 24.6 35.9 41.7

Price Each $96.50 138.50 209.00 247.50 401.00 653.00 742.50

SPARE PARTS Plated Bolt and Nut Size Inches Z\x x 2C\v B\, x 3Z\v C\v x 4Z\v C\v x 4Z\v M\, x 5 1 x 6 1 x 6Z\x

NOTE: See the Spare Parts section for pricing and availability. NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

SECTION 1 GROOVED IPS PIPE COUPLINGS

Style XL79 Coupling

No. 62 90° Extra Heavy “ES” EndSeal Elbow, No. 63 45° Extra Heavy “ES” EndSeal Elbow, No. 64 Extra Heavy “ES” EndSeal Tee

Extra Heavy “ES” Endseal® Fittings Elbows and Tees

ELBOWS AND TEES – 90° ELBOW, 45° ELBOW, OR TEE

Pipe Inches

Refer to publication 07.03

No. 62

Nominal Size 2 (d) 2Z\x 3 4 6

90° Elbow No. 62 Actual Size 2.375 2.875 3.500 4.500 6.625

Painted + + + + +

45° Elbow No. 63 Price Each Painted + + + + +

Tee No. 64 Painted + + + + +

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability.

No. 63

For sizes to 12”, contact Victaulic. Steel Full Flow Elbows available with longer center to end dimensions. Contact Victaulic for details.

No. 64

1-64

VICTAULIC.COM PL2016-GENERAL-C


SECTION 1 GROOVED IPS PIPE COUPLINGS

Grooved IPS Pipe Couplings

1-65

VICTAULIC.COM PL2016-GENERAL-C


SECTION 2 – Cut Grooved Fittings for Rubber

Cut Grooved Fittings for Rubber

VICTAULIC.COM PL2016-GENERAL-C

2-1


Cut Grooved Fittings for Rubber No. 12 – 22Z\x°, No. 13 – 11Z\v°

Cut Grooved Fittings for Rubber Elbows Refer to publication 07.01

No. 12

No. 13

ELBOWS – 22Z\x° ELBOW OR 11Z\v° ELBOW

Nom. Size Inches 1 1Z\v 1Z\x 2 2Z\x 3 3Z\x 4 5 6 8 10 12

Aprx. Wgt. Ea. Lbs 0.6 ‡ 0.8 0.8 1.4 ‡ 2.3 ‡ 3.1 ‡ 4.0 (sw) 5.6 7.8 (sw) 12.2 ‡ 20.0 ‡ 30.0 (sw) 40.0 (sw)

22Z\x° Elbow No. 12 Price Each C-E Inches Painted Galv. 3.25 $170.50 $207.50 1.75 1.75 3.75 181.50 221.00 4.00 4.50 191.00 253.00 2.50 2.88 2.88 740.00 928.00 6.25 875.50 1130.00 7.75 1791.00 2253.50 4.38 2416.00 3062.00 4.88 2580.50 3361.50

Aprx. Wgt. Ea. Lbs 0.3 (sw) 0.5 (sw) 0.5 (sw) 1.0 1.5 2.1 2.7 (sw) 3.6 5.0 (sw) 7.0 10.1 11.8 29.3

11Z\v° Elbow No. 13 Price Each C-E Inches Painted Galv. 1.38 1.38 1.38 1.38 1.50 1.50 1.75 1.75 2.00 $721.50 $872.50 2.00 2.00 2.13 1849.50 2221.50 2.25 2133.50 2737.00

Cut grooved fittings are non-cancellable and non-returnable. NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability. (sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel. ‡ Gooseneck design.

No. 20 Tee, No. 29M Tee with Threaded Branch

Tees

TEES – TEE OR TEE WITH THREADED BRANCH

Refer to publication 07.01

No. 20

SECTION 2 CUT GROOVED FITTINGS FOR RUBBER

No. 29M

2-2

Nom. Size

Aprx. Wgt. Ea.

Inches C\v 1 1Z\v 1Z\x 2 2Z\x 3 3Z\x 4 4Z\x 5 6 8 10 12

Lbs 0.6 1.0 1.5 2.0 3.0 4.3 6.8 7.9 (sw) 11.9 15.0 (sw) 17.8 25.7 47.6 99.0 133.0

Tee No. 20 Price Each Painted Galv. $483.00 $614.00 2953.00 5027.50

Tee with Male Threaded Branch No. 29M Price Each Painted Galv. $3644.50 3564.50 $4036.50 -

Cut grooved fittings are non-cancellable and non-returnable. NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability. (sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.

VICTAULIC.COM PL2016-GENERAL-C


Cut Grooved Fittings for Rubber No. 35 Cross, No. 33 True Y

Cross and Wye Refer to publication 07.01

No. 35

No. 33

CROSS AND WYE – STEEL CROSS OR STEEL 90 TRUE Y

Nom. Size Inches C\v 1 1Z\v 1Z\x 2 2Z\x 3 3Z\x 4 5 6 8 10 12

Aprx Wgt. Ea. Lbs 0.9 1.3 2.1 2.5 3.8 6.1 10.5 11.5 15.8 20.0 28.0 48.0 121.5 110.0

Steel Cross (sw) No. 35 Price Each Painted $783.00 783.00 783.00 1224.00 2164.50 2128.50 2612.00 4543.00 5689.00 8319.50

Galv. $817.00 817.00 926.00 1456.00 2533.50 2341.50 3247.00 5637.50 7894.50 9856.00

Aprx Wgt. Ea. Lbs 0.7 1.1 1.5 1.8 2.5 4.3 6.1 9.6 9.8 15.0 22.3 36.0 69.9 80.0

Steel 90 True Y (sw) No. 33 Price Each Painted $431.00 439.50 511.00 511.00 690.00 877.50 1268.50 1964.00 2371.00 3114.00 4087.00 5173.50

Galv. $498.50 578.50 603.50 603.50 827.50 1060.00 1547.00 2386.50 2933.50 3934.50 5415.00 6694.00

Cut grooved fittings are non-cancellable and non-returnable. NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability.

SECTION 2 CUT GROOVED FITTINGS FOR RUBBER

VICTAULIC.COM PL2016-GENERAL-C

2-3


Cut Grooved Fittings for Rubber No. 25 Grooved Reducing Tee

Reducing Tee

REDUCING TEE

Size Inches

Refer to publication 07.01

No. 25

1 1Z\v 1Z\x

2

2Z\x

3

4

5

SECTION 2 CUT GROOVED FITTINGS FOR RUBBER

6

2-4

8

Run x Branch x 1 x C\v (sw) x x 1 (sw) 1Z\v x x C\v (sw) 1Z\x 1 (sw) 1Z\v (sw) x 2 x C\v 1 1Z\v (sw) 1Z\x x x C\v (sw) 2Z\x 1 1Z\v (sw) 1Z\x 2 x 3 x C\v (sw) 1 1Z\v (sw) 1Z\x 2 2Z\x x 4 x C\v (sw) 1 1Z\v (sw) 1Z\x 2 2Z\x 3 x 5 x 1 (sw) 1Z\x (sw) 2 (sw) 2Z\x 3 4 x 6 x 1 (sw) 1Z\x (sw) 2 2Z\x 3 4 5 x 8 x 1Z\x (sw) 2 (sw) 2Z\x (sw) 3 (sw)

Aprx. Wgt. Each Lbs 1.0 1.3 1.5 1.5 1.7 2.5 2.7 1.8 3.0 3.9 3.8 4.2 3.9 4.5 5.7 6.1 8.0 6.5 6.2 6.4 8.0 7.8 9.6 10.2 11.2 11.4 11.6 14.0 14.3 14.5 15.2 16.6 16.7 23.0 24.0 21.6 21.4 26.5 25.0 23.2 33.0 33.5 39.0 33.6

Reducing Tee No. 25 Price Each Painted $372.00 372.00 372.00 372.00 372.00 377.00 614.50 991.50 1197.00 915.50 915.50 960.50 1285.00 1285.00 1782.50 2092.00 2092.00 2092.00

Galv. $447.00 447.00 447.00 447.00 447.00 464.00 755.50 1157.00 1649.50 1184.50 1184.50 1241.50 1683.00 1683.00 2160.50 2766.00 2768.00 2768.00

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. (sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.

VICTAULIC.COM PL2016-GENERAL-C


Cut Grooved Fittings for Rubber Reducing Tee

Size Inches

Refer to publication 07.01

No. 25

8

Run x Branch x 8 x

10

x

10

12

x

12

4 5 (sw) 6 x 1Z\x 2 (sw) 2Z\x (sw) 3 (sw) 4 (sw) 5 (sw) 6 (sw) 8 (sw) x 1 (sw) 2 (sw) 2Z\x (sw) 3 (sw) 4 (sw) 5 (sw) 6 (sw) 8 (sw) 10 (sw)

Aprx. Wgt. Each Lbs 41.8 34.0 42.3 62.0 62.0 62.4 60.0 61.0 52.0 59.0 64.7 77.0 80.0 78.0 82.0 80.0 75.0 75.0 80.0 84.0

Reducing Tee No. 25 Price Each Painted $2654.00 3343.50 3343.50 3343.50 3237.00 2962.00 3343.50 3343.50 2971.50 2971.50 2971.50 4135.50 4135.50 3166.00 4135.50 4135.50 4133.50

Galv. $3636.50 4583.50 4583.50 4714.50 4512.00 3874.50 4427.00 4455.00 4347.00 4185.50 4347.00 5823.50 5819.00 4190.50 5441.00 5662.00 5640.00

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. (sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.

SECTION 2 CUT GROOVED FITTINGS FOR RUBBER

VICTAULIC.COM PL2016-GENERAL-C

2-5


Cut Grooved Fittings for Rubber No. 29T Threaded Reducing Tee

Reducing Tee with Threaded Branch

REDUCING TEE WITH THREADED BRANCH

Refer to publication 07.01 2

SECTION 2 CUT GROOVED FITTINGS FOR RUBBER

No. 29T

Size Inches Run x Branch x 2 x

2Z\x

x

2Z\x

x

3

x

3

x

4

x

4

x

5

x

5

x

6

x

6

x

8

x

8

x

10

x

10

x

12

x

12

x

C\v 1 1Z\v (sw) 1Z\x (sw) C\v (sw) 1 (sw) 1Z\v 1Z\x 2 (sw) C\v (sw) 1 1Z\v 1Z\x (sw) 2 (sw) 2Z\x (sw) C\v (sw) 1 1Z\v (sw) 1Z\x 2 2Z\x 3 2 (sw) 2Z\x (sw) 3 (sw) 4 (sw) 1 (sw) 1Z\x (sw) 2 2Z\x 3 4 5 2 (sw) 3 (sw) 4 5 (sw) 6 2 (sw) 3 (sw) 4 (sw) 5 (sw) 6 (sw) 8 (sw) 3 (sw) 4 (sw) 5 (sw) 6 (sw) 8 (sw) 10 (sw)

Reducing Tee No. 29T with Threaded Branch Price Each Aprx. Wgt. Each Lbs Painted Galv. 2.5 2.7 2.9 $376.00 $475.50 3.0 3.5 453.00 515.50 3.8 3.8 460.00 513.50 3.9 4.5 5.9 721.50 766.50 6.1 6.3 600.50 743.50 6.5 6.2 6.4 7.2 957.50 1005.50 7.8 8.5 570.00 1692.50 9.2 11.2 11.4 11.6 14.5 1326.50 1202.50 15.2 16.6 1326.50 1226.00 16.7 1326.50 1297.00 23.0 1303.00 1695.50 25.0 1303.00 1695.50 21.6 21.4 26.5 25.0 23.2 1326.50 1740.00 33.5 1806.50 2388.50 33.6 1806.50 2388.50 41.8 34.0 2527.00 3201.50 42.3 62.0 2605.00 3566.00 60.0 2931.50 3669.50 61.0 3015.50 3775.00 52.0 3568.50 4257.00 59.0 4031.00 64.7 80.0 3290.00 4658.50 82.0 3039.00 4442.00 75.0 75.0 3290.00 4658.50 80.0 84.0 -

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. Available with British Standard Pipe Threads (BSPT). Contact Victaulic for details. (sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.

2-6

VICTAULIC.COM PL2016-GENERAL-C


Cut Grooved Fittings for Rubber No. 30 Lateral

Lateral

LATERAL

Nom. Size

Refer to publication 07.01

Aprx. Wgt. Ea. Lbs 1.0 (sw) 1.7 (sw) 2.5 3.5 (sw) 4.6 (sw) 9.0 (sw) 11.7 17.8 (sw) 17.9 21.8 (sw) 43.6 (sw) 72.0 (sw) 105.0 (sw) 165.0 (sw)

Inches C\v 1 1Z\v 1Z\x 2 2Z\x 3 3Z\x 4 5 6 8 10 12

No. 30

45° Lateral No. 30 Price Each Painted $285.50 311.50 361.50 561.00 1790.50 3374.50 4728.50 6311.00

Galv. $323.50 408.00 497.50 731.50 2250.50 4580.00 6421.00 8839.50

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability. (sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.

No. 30R Reducing Lateral

Reducing Laterals

REDUCING LATERALS

Nominal Size

Refer to publication 07.01

Inches 3 x

x

4

x

4

x

5

x

5

x

6

x

6

x

8

x

8

x

10

x

10

x

12

x

12

x

No. 30R

2 2Z\x 2 2Z\x 3 2 3 4 3 4 5 4 5 6 4 5 6 8 4 5 6 8 10

Reducing Laterals No. 30R † Price Each Painted $863.50 863.50 974.50 1100.50 1221.00 1204.50 1499.50 1683.50 1693.00 1882.00 2106.50 2667.00 2926.50 3112.00 3412.50 3866.50 4073.50 4671.00 4834.50 5237.00 5996.00

Galv. $1007.00 1081.50 1209.50 1351.00 1578.50 1731.50 1996.50 2195.50 2326.50 2533.00 2879.50 3708.00 4158.50 4438.00 4995.50 5233.50 5519.50 6226.50 6725.00 6754.50 6950.00 7514.50 8588.00

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability. † All No. 30R fittings are segmentally welded steel.

VICTAULIC.COM PL2016-GENERAL-C

SECTION 2 CUT GROOVED FITTINGS FOR RUBBER

3

Aprx. Wgt. Each Lbs 9.8 9.8 10.0 10.0 18.3 24.0 27.0 26.5 37.0 36.5 44.7 62.0 75.5 82.0 104.8 99.0 105.8 118.0 135.0 122.0 137.0 147.0 167.0

2-7


Cut Grooved Fittings for Rubber No. 32 Tee Wyes

Tee Wyes

TEE WYES

Nominal Size

Refer to publication 07.01

No. 32

2 2Z\x 3 3Z\x 4

x x x x x

Inches 2 2Z\x 3 3Z\x 4

x x x x x

5

x

5

x

6

x

6

x

8

x

8

x

10

x

10

x

12

x

12

x

2 2Z\x 3 3Z\x 3 4 3 4 5 3 4 5 6 3 4 5 6 8 3 4 5 6 8 10 12

Aprx. Wgt. Each Lbs 6.4 11.5 14.3 22.9 23.0 26.0 29.0 36.7 48.0 37.3 46.3 55.0 60.5 76.0 76.4 85.6 112.0 127.1 96.0 97.4 115.1 133.1 156.0 190.0 240.0

Tee Wye No. 32 † Price Each Painted $965.00 1230.50 1577.50 1668.00 2112.50 1931.50 2367.50 3187.00 2115.50 2561.00 3409.50 3543.50 3306.00 4190.00 4368.50 5536.50 3553.50 4098.00 5097.00 5037.50 6175.50 8203.00 11324.00

Galv. $1153.00 1507.50 1952.00 2121.50 2765.50 2437.50 3005.00 4020.00 2811.50 3366.00 4421.50 4637.00 4546.00 5637.00 5026.50 7606.50 4933.00 5497.50 6656.50 7060.00 8579.00 11090.50 15037.00

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability. † All No. 32 fittings are segmentally welded steel.

No(s). 45 and 46 Flanged Adapter Nipples

Flanged Adapter Nipples

SECTION 2 CUT GROOVED FITTINGS FOR RUBBER

Refer to publication 07.01

2-8

Nos. 45 & 46

FLANGED ADAPTER NIPPLES – NO. 45 – 150 LB AND NO. 46 – 300 LB

Size x Length Inches x 3 C\v 1 x 3 1 x 4 x 4 1Z\v x 4 1Z\x 2 x 4 x 4 2Z\x 3 x 4 x 4 3Z\x 4 x 6 5 x 6 6 x 6 8 x 6 10 x 8 12 x 8

No. 45 – 150 lb Black Galv. $639.50 $750.50 667.00 785.00 668.50 788.50 679.50 832.50 918.50 1130.00 933.00 1164.00 1143.00 1348.00 1718.50 1939.50 2418.00 1970.00 2524.50 2606.00 3423.00 3461.00 4820.50 4833.00 9105.50

No. 46 – 300 lb Black Galv. -

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability.

VICTAULIC.COM PL2016-GENERAL-C


SECTION 3 – Hole Cut Products

Hole Cut Products

VICTAULIC.COM PL2016-GENERAL-C

3-1


IPS Hole Cut Products Styles 920/920N Female Threaded Mechanical-T Outlet

Mechanical-T Outlet

STYLE 920 – FEMALE THREADED BRANCH

Size

STYLES 920/920N

Style

Refer to publication 11.02 SECTION 3 IPS HOLE CUT PRODUCTS

Inches Run x Brch. 2 x Z\x C\v 1

2Z\x

x

1Z\v 1Z\x Z\x C\v 1

x

1Z\v 1Z\x Z\x C\v 1

Style 920 Female

3

1Z\v § 1Z\x § 2§ 4

x

Z\x C\v 1 1Z\v 1Z\x 2 2Z\x 3

5

x

1Z\x 2 2Z\x 3

6

8

x

x

1Z\v 1Z\x 2 2Z\x 3 4 2 2Z\x 3 4

Number 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920 920 920 920 920 920 920N 920N 920N 920 920 920 920 920 920 920

COMPLETE MECHANICAL-T Female Threaded Branch † Price Each Aprx. Wgt. Ea. Lbs Painted Galv. 3.1 $117.50 $157.50 3.1 117.50 157.50 3.0 117.50 157.00 3.5 139.00 182.50 3.6 139.00 190.50 3.0 132.00 172.00 3.0 132.00 172.00 2.9 132.00 171.00 3.5 180.00 233.50 3.6 180.00 233.00 3.4 147.50 189.00 3.4 152.50 192.00 3.3 152.50 187.50 3.8 205.00 280.50 4.1 205.00 277.50 4.9 240.00 319.00 3.7 180.00 231.50 3.7 180.00 229.00 3.6 180.00 229.00 4.0 244.50 327.50 4.2 244.50 327.50 5.0 244.50 331.50 5.8 256.50 349.00 8.4 277.00 393.00 7.7 303.50 420.00 8.2 314.50 432.50 8.3 335.50 461.00 8.4 360.50 491.00 – – – 5.1 302.50 418.50 5.6 334.00 418.00 7.6 323.00 446.50 8.4 334.00 459.50 10.1 366.50 513.00 11.6 469.00 644.00 11.6 469.00 644.00 12.6 469.00 653.50 15.3 579.50 805.00

Spare Parts Standard Bolts & Nuts Grade “E” Size or “T” Inches Gaskets x 2C\v $26.50 Z\x x 2C\v 26.50 Z\x x 2C\v 26.50 Z\x x 2C\v 43.00 Z\x x 2C\v 43.00 Z\x x 2C\v 26.50 Z\x x 2C\v 26.50 Z\x x 2C\v 26.50 Z\x x 3Z\v 43.00 Z\x x 3 43.00 Z\x x 2C\v 26.50 Z\x x 2C\v 26.50 Z\x x 2C\v 26.50 Z\x x 2C\v 43.00 Z\x x 2C\v 43.00 Z\x x 3Z\v 45.50 Z\x x 2C\v 26.50 Z\x x 2C\v 26.50 Z\x x 2C\v 26.50 Z\x x 2C\v 43.00 Z\x x 2C\v 43.00 Z\x x 45.50 Z\x 2C\v 1 x 2C\v 48.00 1 x 3Z\v 48.50 x 4C\v 43.00 B\, x 4C\v 45.50 B\, x 4C\v 48.00 B\, x 4C\v 48.50 B\, x 2C\v 43.00 Z\x x 2C\v 43.00 Z\x x 2C\v 45.50 Z\x x 4C\v 48.00 B\, x 4C\v 48.50 B\, x 4C\v 64.50 B\, x 4Z\v 48.00 C\v x 4Z\v 48.00 C\v x 4Z\v 48.50 C\v x 4Z\v 64.50 C\v

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. Victaulic Hole Cutting Tool available, designed specifically for cutting holes to receive Mechanical-T outlet. See Pipe Preparation Tool Section for information. † Some size Mechanical-T outlets are available with British Standard Pipe Threads (BSPT) female threaded outlets. Contact Victaulic for details. * Supplied with British Standard Threads only, unless ordered otherwise. § Requires Z\x x 3Z\v” bolts when used in cross configuration.

3-2

VICTAULIC.COM PL2016-GENERAL-C


IPS Hole Cut Products Styles 920/920N Grooved Mechanical-T Outlet

Mechanical-T Outlet

STYLE 920 – GROOVED BRANCH

Size

STYLES 920/920N

Style

Refer to publication 11.02

2Z\x 3 5

x

1Z\x 2 2Z\x 3

6

8

x

x

1Z\v 1Z\x 2 2Z\x 3 4 2 2Z\x 3 4

Number 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920 920 920 920 920 920 920N 920N 920N 920 920 920 920 920 920 920

Spare Parts Standard Bolts & Nuts Grade “E” Size or “T” Inches Gaskets – $26.50 43.00 Z\x x 2C\v 43.00 Z\x x 2C\v – 26.50 43.00 Z\x x 3Z\v 3 43.00 Z\x x – 26.50 43.00 Z\x x 2C\v 43.00 Z\x x 2C\v 45.50 Z\x x 3Z\v 45.50 Z\x x 2C\v – 26.50 43.00 Z\x x 2C\v 43.00 Z\x x 2C\v 45.50 Z\x x 2C\v 48.00 Z\x x 2C\v 48.50 Z\x x 3Z\v 43.00 B\, x 4C\v 45.50 B\, x 4C\v 48.00 B\, x 4C\v 48.50 B\, x 4C\v 43.00 Z\x x 2C\v 43.00 Z\x x 2C\v 45.50 Z\x x 2C\v 48.00 B\, x 4C\v 48.50 B\, x 4C\v 64.50 B\, x 4C\v + C\v x 4Z\v 48.00 C\v x 4Z\v 48.50 C\v x 4Z\v 64.50 C\v x 4Z\v

SECTION 3 IPS HOLE CUT PRODUCTS

Style 920 Grooved

Inches Run x Brch. 2 x 1 1Z\v 1Z\x 1 2Z\x x 1Z\v 1Z\x 3 x 1 1Z\v § 1Z\x § 2§ 2 3Z\x x 4 x 1 1Z\v 1Z\x 2

COMPLETE MECHANICAL-T Grooved Branch Price Each Aprx. Wgt. Ea. Lbs Painted Galv. – – – 3.5 $139.00 $182.50 3.2 139.00 190.50 – – – 3.2 180.00 233.50 3.3 180.00 233.00 – – – 3.7 205.00 279.00 3.8 205.00 277.50 3.5 240.00 326.50 5.0 343.50 476.00 – – – 3.6 244.50 326.50 3.9 244.50 327.50 4.6 244.50 331.50 5.0 256.50 349.00 6.4 277.00 393.00 7.6 303.50 420.00 8.0 314.50 432.50 7.9 335.50 461.00 8.8 360.50 491.00 4.8 302.50 418.50 5.1 302.50 418.50 5.6 334.00 418.00 8.3 323.00 446.50 9.9 334.00 459.50 10.1 366.50 513.00 11.4 469.00 + 11.6 469.00 644.00 11.6 469.00 653.50 12.5 579.50 805.00

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. Victaulic Hole Cutting Tool available, designed specifically for cutting holes to receive Mechanical-T outlet. See Pipe Preparation Tool Section for information. + Quoted on application. Contact Victaulic for pricing and availability. † Some size Mechanical-T outlets are available with British Standard Pipe Threads (BSPT) female threaded outlets. Contact Victaulic for details. § Requires Z\x x 3Z\v” bolts when used in cross configuration.

VICTAULIC.COM PL2016-GENERAL-C

3-3


IPS Hole Cut Products Styles 920/920N Mechanical-T Cross

Mechanical-T Cross STYLE 920/920N * SECTION 3 IPS HOLE CUT PRODUCTS

Refer to publication 11.03

The following combinations of Mechanical-T Crosses can be achieved with the use of two Mechanical-T Upper Housings of the same run size and the same or different outlet size. Most sizes of Mechanical-T outlets are available with either grooved or female threaded outlets. Your choice must be specified on each order. STYLES 920/920N – MECHANICAL-T CROSS

2

2Z\x

3

Nominal Size Inches Run x Branch A x 2 x Z\x Z\x Z\x Z\x Z\x C\v C\v C\v C\v 1 1 1

x

x

2Z\x

3

x

x

1Z\v 1Z\x 1Z\x Z\x Z\x Z\x Z\x Z\x C\v C\v C\v C\v 1 1 1 1Z\v 1Z\x 1Z\x Z\x Z\x Z\x Z\x Z\x Z\x

Style B x Z\x x C\v x 1 x 1Z\v x 1Z\x x C\v x 1 x 1Z\v x 1Z\x x 1 x 1Z\v x 1Z\x x 1Z\v x 1Z\v x 1Z\x x Z\x x C\v x 1 x 1Z\v x 1Z\x x C\v x 1 x 1Z\v x 1Z\x x 1 x 1Z\v x 1Z\x x 1Z\v x 1Z\v x 1Z\x x Z\x x C\v x 1 x 1Z\v § x 1Z\x § x 2§

Number 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N

COMPLETE MECHANICAL-T Cross with “E” or “T” Gasket † Painted $173.00 173.00 173.00 207.50 207.50 173.00 173.00 307.50 265.50 173.00 207.50 207.50 207.50 207.50 207.50 194.00 194.00 194.00 265.50 265.50 194.00 194.00 265.50 265.50 194.00 265.50 265.50 265.50 265.50 265.50 219.00 227.00 307.50 307.50 307.50 356.50

Galv. $232.50 232.50 232.50 283.50 283.50 232.50 207.50 372.50 311.50 232.50 254.00 283.50 283.50 283.50 283.50 194.00 227.00 227.00 311.50 283.50 227.00 227.00 311.50 283.50 227.00 311.50 254.00 311.50 311.50 283.50 254.50 254.50 368.50 372.50 368.50 424.50

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. * Style 920 and Style 920N housings cannot be mated to achieve cross connections. Refer to publication 21.03, or contact Victaulic for details. ‡ Available grooved only.

3-4

VICTAULIC.COM PL2016-GENERAL-C


IPS Hole Cut Products

4

Style

x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x

B C\v 1 1Z\v 1Z\x 2 1 1Z\v 1Z\x 2 1Z\v § 1Z\v § 1Z\x § 1Z\v § 1Z\x 2§ Z\x C\v 1 1Z\v 1Z\x 2 C\v 1 1Z\v 1Z\x 2 1 1Z\v 1Z\x 2 1Z\v 1Z\v 1Z\x 1Z\v 1Z\x 2 2Z\x 2Z\x 3

Number 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920N 920 920 920

COMPLETE MECHANICAL-T Cross with “E” or “T” Gasket † Painted $227.00 307.50 307.50 307.50 356.50 227.00 307.50 307.50 356.50 307.50 307.50 307.50 356.50 356.50 356.50 265.50 265.50 265.50 364.00 364.00 364.00 265.50 265.50 364.00 364.00 364.00 265.50 364.00 364.00 364.00 364.00 364.00 364.00 364.00 364.00 364.00 383.50 412.00 412.00

Galv. $254.50 368.50 372.50 368.50 424.50 254.50 307.50 372.50 424.50 372.50 372.50 368.50 424.50 424.50 424.50 307.50 307.50 307.50 436.50 436.50 436.50 307.50 307.50 436.50 436.50 436.50 307.50 436.50 436.50 436.50 436.50 436.50 436.50 436.50 436.50 436.50 521.50 525.00 525.00

SECTION 3 IPS HOLE CUT PRODUCTS

3

Nominal Size Inches Run x Branch A x 3 x C\v C\v C\v C\v C\v 1 1 1 1 1Z\v 1Z\x 1Z\x 2 2 2 x 4 x Z\x Z\x Z\x Z\x Z\x Z\x C\v C\v C\v C\v C\v 1 1 1 1 1Z\v 1Z\x 1Z\x 2 2 2 2Z\x 3 3

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. * Style 920 and Style 920N housings cannot be mated to achieve cross connections. Refer to publication 21.03, or contact Victaulic for details. ‡ Available grooved only.

VICTAULIC.COM PL2016-GENERAL-C

3-5


SECTION 3 IPS HOLE CUT PRODUCTS

IPS Hole Cut Products

5

6

8

Nominal Size Inches Run x Branch A x 5 x 1Z\x 2 2 2Z\x 2Z\x 2Z\x 3 3 3 3 x 6 x 1Z\v ‡ 1Z\x 1Z\x 2 2 2Z\x 3 3 4 4 4 x 8 x 2 2Z\x 2Z\x 3 3 4 4

Style B x 1Z\x x 1Z\x x 2 x 1Z\x x 2 x 2Z\x x 1Z\x x 2 x 2Z\x x 3 x 1Z\v ‡ x 1Z\v ‡ x 1Z\x x 1Z\x x 2 x 2Z\x x 2Z\x x 3 x 2Z\x x 3 x 4 x 2 x 2 x 2Z\x x 2Z\x x 3 x 2Z\x x 3

Number 920 920 920 920 920 920 920 920 920 920 920N 920N 920N 920N 920N 920 920 920 920 920 920 920 920 920 920 920 920 920

COMPLETE MECHANICAL-T Cross with “E” or “T” Gasket † Painted $536.00 469.00 469.00 538.50 538.50 538.50 537.00 537.00 537.00 537.00 452.00 452.00 452.00 496.00 496.00 481.50 496.00 496.00 546.50 546.50 546.50 700.00 700.00 700.00 700.00 700.00 866.00 866.00

Galv. $640.50 641.00 577.00 641.00 641.00 641.00 641.00 641.00 641.00 641.00 560.50 560.50 560.50 606.00 606.00 577.50 606.00 606.00 685.00 685.00 685.00 861.50 861.50 861.50 861.50 861.50 1042.00 1042.00

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. * Style 920 and Style 920N housings cannot be mated to achieve cross connections. Refer to publication 21.03, or contact Victaulic for details. ‡ Available grooved only.

3-6

VICTAULIC.COM PL2016-GENERAL-C


IPS Hole Cut Products Style 923 Strapless Outlet

Strapless Outlet

STRAPLESS OUTLET – WITH GRADE “E” OR “T” GASKET

Nominal Size

STYLE 923

Refer to publication 11.05

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

4 – 8”

SECTION 3 IPS HOLE CUT PRODUCTS

Inches 4 – 8 x Z\x NPT IPS 4 – 8 x C\v NPT IPS 10 and larger x Z\x NPT IPS 10 and larger x C\v NPT IPS

COMPLETE STRAPLESS OUTLET With “E” or “T” Gasket * Aprx. Wgt. Per Unit Price Lbs Per Unit 2.28 $310.00 2.28 310.00 2.16 310.00 2.16 310.00

10” – Up

Style 924 Thermometer Outlet

Thermometer Outlet

THERMOMETER OUTLET – WITH GRADE “E” GASKET

Nominal Size

STYLE 924

Refer to publication 11.06 Inches 4 – 8 for 6 Stem # 10 Flat for 6 Stem #

COMPLETE THERMOMETER OUTLET With “E” or “T” Gasket Aprx. Wgt. Per Unit Price Lbs Per Unit 3.78 $491.50 3.78 491.50

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. # Thermometer Outlet is internally threaded to 1Z\v - 18 NEF 2B.

4 – 8”

10” – up

VICTAULIC.COM PL2016-GENERAL-C

3-7


IPS Hole Cut Products Style 931 Vic-Tap II

Vic-Tap II

SECTION 3 IPS HOLE CUT PRODUCTS

STYLE 931 MECHANICAL-T AND BALL VALVE

for use with the Vic-Tap II Hole Cutting Tool

Vic-Tap II Style 931 is a bolted branch connection with a full port ball valve permitting tapping pressurized systems up to 500 psi. The ductile iron housing has hardened steel teeth set into the housing which grip the pipe as bolts are tightened. Two standard gaskets are available: Grade “E” EPDM or Grade “T” nitrile. Specify choice on order. Various outlet sizes can be obtained from the standard 2Z\x” size down using reducers. See Section 12 – Pipe Preparation Tools for compatible Vic-Tap Hole Cutting Tool information. Size Run 4 5 6 8

x Branch x 2Z\x x 2Z\x x 2Z\x x 2Z\x

Complete Vic-Tap II Assembly with Complete Mechanical-T Grade “E” or “T” Gasket and Ball Valve Aprx. Wgt. Lbs List Price 12.0 $5895.00 13.0 5895.00 14.0 5895.00 15.0 5895.00

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

3-8

VICTAULIC.COM PL2016-GENERAL-C


SECTION 4 – Valves and Specialties

Valves and Specialties

VICTAULIC.COM PL2016-GENERAL-C

4-1


Grooved IPS Pipe Valves Series 761 Vic-300 MasterSeal™ Butterfly Valve

Grooved IPS Valves Vic-300 MasterSeal™ Butterfly Valve SERIES 761

300 psi WP EPDM “E”, Nitrile “T”, or Viton Fluoroelastomer “O” Seat Ductile Iron Nickel Coated, Aluminum Bronze or Stainless Steel Disc Refer to publication 08.20. Specify seat material, disc/stem material and operator when ordering. For power actuation, contact Victaulic for your nearest authorized valve actuation centre. FIGURE NO. CONFIGURATION: V - XXX - 76 - 1 - S - E - ZZ

Gear Operator

10-Position Handle

PRODUCT

SIZE CODE

SERIES

BODY

Valve

See Below

761

Ductile Iron

V

XXX

76

1

DISC/STEM D.I./SS, Al Brz/SS, or SS/SS S, B or X

SEAT

OPERATOR

“E”, “T”, or “O”

See Below

E, T, or O

ZZ

SECTION 4 GROOVED IPS PIPE VALVES

Example: V-040-76-1-S-E-3 is a 4-inch with “E” EPDM Seat and Aluminum Gear Operator

Nominal Size Inches 2” 2Z\x” 3” Size Code XXX 020 024 030 BARE VALVES ZZ EPDM “E” Seat 00 $812.00 $1060.50 $1118.50 V - XXX - 76 - 1 - S - E - 00 Nitrile “T” Seat 00 812.00 1060.50 1118.50 V - XXX - 76 - 1 - S - T - 00 Viton “O” Seat 00 966.00 1229.50 1320.50 V - XXX - 76 - 1 - S - O - 00 Approx. Weight Each Lbs 3.5 5.0 6.0 Valves Complete With Operator - “E” EPDM or With 10-Position Handle ZZ 10-Position handle with Memory 2 $1076.50 $1324.00 $1382.50 Stop 10-Position handle Tamperproof 4 1224.50 1473.00 1531.50 Approx. Weight Each Lbs 6.0 7.5 8.5 With Gear Operator (Alum. Hsg.) ZZ Gear Operator 3 $2252.50 $2536.50 $2602.50 Approx. Weight Each Lbs 5 6.0 7.5 8.5 Gear Operator with Memory Stop 5 $2460.00 $2745.50 $2811.00 Gear Operator with Chain Wheel 6 2917.50 3201.50 3267.00 Gear Operator with Mem. and Chain 7 3125.50 3409.50 3474.00 Wheel AWWA Gear Operator with 2” Sq. 8 + + + AWWA Nut

4” 040

5” 6” 050 060 Bare - Price Each

8” 080

10” 100

12” 120

$1695.00

$2449.00

$2539.00

$3291.50

$4775.00

$6164.50

1695.00

2449.00

2539.00

3291.50

4775.00

6164.50

1959.00

2732.00

2989.00

3905.00

5417.50

6958.00

72.0

88.0

$6263.50

$7006.00

9.3 16.8 20.0 34.3 “T” Nitrile Seat - D.I. Nickel Coated Disc Complete Valve - Price Each $1906.00 $2712.50 $2924.50 $3671.00 2054.00 2862.00 3073.50 11.8 20.0 23.2 Complete Valve - Price Each $2940.00 $3742.00 $4264.00 11.8 20.8 24.0 $3147.00 $3950.00 $4524.50 3603.50 4405.50 5588.00

3821.50 37.5

N/A 84.0

N/A 100.0

$4707.00 38.3 $5012.00 6031.00

$6263.50 81.5 $6439.50 8031.50

$7713.50 97.5 $7996.50 9591.00

3811.50

4614.50

5848.50

6335.50

8315.00

9872.50

+

+

+

+

+

+

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. N/A - Not available. Specify seat material, disc/stem material and operator when ordering. + Quoted on application. Contact Victaulic for pricing and availability.

4-2

VICTAULIC.COM PL2016-GENERAL-C


Grooved IPS Pipe Valves 10” 100

12” 120

N/A

N/A

N/A 84.0

N/A 100.0

+ 81.5

+ 97.5

$11432.00 $13678.00 N/A 84.0

N/A 100.0

$11432.00 $14385.50 81.5 97.5

$6924.50

+

N/A 84.0

N/A 100.0

$6924.50 81.5 $7287.50 8944.50

$8526.00 97.5 $9042.00 10699.00

9237.50

10992.50

+

+

N/A

N/A

N/A 84.0

N/A 100.0

+ 81.5

+ 97.5

SECTION 4 GROOVED IPS PIPE VALVES

Nominal Size Inches 2” 2Z\x” 3” 4” 5” 6” 8” Size Code XXX 020 024 030 040 050 060 080 Valves Complete With Operator - “E” EPDM or “T” Nitrile Seat - Aluminum Bronze Disc/SS Stems With 10-Position Handle ZZ Complete Valve - Price Each 10-Position handle with Memory 2 $1279.00 $1628.50 $1889.50 $2586.50 $3873.00 $4688.00 N/A Stop 10-Position handle Tamperproof 4 1428.00 1778.50 2039.00 2735.50 4021.50 4836.00 N/A Approx. Weight Each Lbs 6.0 7.5 8.5 11.8 20.0 23.2 37.5 With Gear Operator (Alum. Hsg.) ZZ Complete Valve - Price Each Gear Operator 3 $2493.00 $2841.50 $3110.50 $3265.50 $4895.50 $5723.50 + Approx. Weight Each Lbs 6.0 7.5 8.5 11.8 20.8 24.0 38.3 Valves Complete With Operator - “E” EPDM or “T” Nitrile Seat - Stainless Steel Disc/Stems With 10-Position Handle ZZ Complete Valve - Price Each 10-Position handle with Memory 2 $1807.50 $2200.50 $2266.50 $2820.00 $4174.00 $4771.50 $7224.00 Stop 10-Position handle Tamperproof 4 1957.00 2350.00 2414.50 2967.50 4323.00 4921.00 7372.00 Approx. Weight Each Lbs 6.0 7.5 8.5 11.8 20.0 23.2 37.5 With Gear Operator (Alum. Hsg.) ZZ Complete Valve - Price Each Gear Operator 3 $2982.50 $3414.50 $3486.00 $3852.50 $5203.50 $6111.00 $8259.50 Approx. Weight Each Lbs 6 7.5 8.5 11.8 20.8 24.0 38.3 Valves Complete With Operator - “O” Viton Fluoroelastomer Seat - D.I. Nickel Coated Disc. With 10-Position Handle ZZ Complete Valve - Price Each 10-Position handle with Memory 2 $1234.00 $1496.50 $1587.00 $2172.50 $4025.00 $3380.50 $4289.00 Stop 10-Position handle Tamperproof 4 1364.50 1624.50 1714.00 2291.00 4119.00 3482.50 4379.50 Approx. Weight Each Lbs 6.0 7.5 8.5 11.8 20.0 23.2 37.5 With Gear Operator (Alum. Hsg.) ZZ Complete Valve - Price Each Gear Operator 3 $2426.00 $2725.50 $2825.00 $3219.50 $4469.50 $4738.00 $5339.00 Approx. Weight Each Lbs 6.0 7.5 8.5 11.8 20.8 24.0 38.3 Gear Operator with Memory Stop 5 $2600.50 $2897.00 $2994.00 $3383.00 $4407.00 $4934.00 $5571.00 Gear Operator with Chain Wheel 6 3058.00 3352.00 3451.00 3839.50 4862.00 5997.00 6590.50 Gear Operator with Mem. and Chain 7 3230.50 3560.00 3657.00 4047.50 5070.50 6257.50 6895.00 Wheel AWWA Gear Operator with 2” Sq. 8 + + + + + + + AWWA Nut Valves Complete With Operator - “O” Viton Fluoroelastomer Seat -Aluminum Bronze Disc/SS Stems With 10-Position ZZ Complete Valve - Price Each 10-Position handle with Memory 2 $1419.00 $1780.00 $2073.00 $2822.50 + $5096.50 N/A Stop 10-Position handle Tamperproff 4 1567.50 1929.00 2185.50 2973.50 + 5245.50 N/A Approx. Weight Each Lbs 6.0 7.5 8.5 11.8 20.0 23.2 37.5 With Gear Operator (Alum. Hsg.) ZZ Complete Valve - Price Each Gear Operator 3 + + + $3910.50 + $6525.50 + Approx. Weight Each Lbs 6.0 7.5 8.5 11.8 20.8 24.0 38.3 NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability. N/A - Not available. Specify seat material, disc/stem material and operator when ordering.

VICTAULIC.COM PL2016-GENERAL-C

4-3


Grooved IPS Pipe Valves Nominal Size Inches 2” 2Z\x” 3” 4” 5” 6” 8” 10” 12” Size Code XXX 020 024 030 040 050 060 080 100 120 Valves Complete With Operator - “O” Viton Fluoroelastomer Seat - Stainless Steel Disc/Stems With 10-Position Handle ZZ Complete Valve - Price Each 10-Position handle with Memory 2 $1974.50 $2385.00 $2481.50 $3099.00 $5106.00 $5252.50 $7890.00 + + Stop 10-Position handle Tamperproof 4 2095.50 2500.50 2597.50 3189.00 4945.00 5329.50 7932.00 N/A N/A Approx. Weight Each Lbs 6.0 7.5 8.5 11.8 20.0 23.2 37.5 84.0 100.0 With Gear Operators (Alum. Hsg.) ZZ Complete Valve - Price Each Gear Operator 3 $3377.00 $3614.00 $3720.50 $3910.50 $5990.00 $6525.50 $8940.50 $12164.50 $15291.00 Approx. Weight Each Lbs 6.0 7.5 8.5 11.8 20.8 24.0 38.3 81.5 97.5 Kits Kits - Price Each Spare Handwheel $95.00 $95.00 $95.00 $95.00 $213.50 $213.50 $213.50 $220.00 $220.00 Chain Wheel 729.00 729.00 729.00 729.00 1447.00 1447.00 1447.00 1447.00 1447.00 Memory Stop for Gear Operator 720.50 720.50 720.50 720.50 744.00 744.00 744.00 744.00 744.00 Gear Operator 1705.50 1705.50 1705.50 2076.50 2076.50 2076.50 2248.00 2585.50 2585.50 10-Position handle with Memory Stop 973.00 973.00 973.00 973.00 1144.00 1144.00 1144.00 + + 10-Position handle Tamperproof 1709.00 1709.00 1709.00 1709.00 1831.00 1831.00 1831.00 + + NOTE: Items listed in shaded areas are non-cancellable and non-returnable. N/A - Not available. Specify seat material, disc/stem material and operator when ordering.

SECTION 4 GROOVED IPS PIPE VALVES

+ Quoted on application. Contact Victaulic for pricing and availability.

V - 040 - 76 1

Type

In./mm

V

2/50 2½/65 76.1 mm 3/80 4/100 108.0 mm 5/125 133.0 mm 139.7 mm 6/150 159.0 mm 165.1 mm 8/200 10/250 12/300

Size Code

Series

Body Material

020 76 -Iron/IPS 1 - Ductile Iron 024 761 030 040 108 050 133 139 060 159 165 080 100 120

Disc/Stem

S

E -0

Seat

S - Ductile Iron/416SS E - EPDM B - Aluminum Bronze/ T - Lubricated 416SS Nitrile V - Thermal Barrier O - FluoroX - CF8M/416SS elastomer 9 - Special *

9 - Special*

Operator

0 - Bare 2 - 10-Position handle with memory stop 3 - Gear operator 4 - Lever lock with tamper resistant device (8"/200 mm) 5 - Gear operator with memory stop 6 - Gear operator with chain wheel 7 - Gear operator with memory stop and chain wheel 8 - Gear operator with AWWA 2" square oper. nut 9 - Special*

NOTES: * Details required with order

4-4

VICTAULIC.COM PL2016-GENERAL-C


Grooved IPS Pipe Valves Series W761 Vic-300 AGS (14 – 24”) 300 psi Butterfly Valve

AGS Vic-300 300 psi Butterfly Valve

AGS SERIES VIC-300 300-PSI BUTTERFLY VALVES

AGS Series Vic-300 Bare Valve ‡ With “E” or “T” Aprx. Weight Each Price Each Lbs 1182-00 125.0 $10308.50 153.0 12034.00 199.0 14295.00 285.0 16685.00 451.0 20140.50

Size Actual Inches 14 16 18 20 24

SERIES W761

Refer to publication 20.06

Size Code 140 160 180 200 240 Size

Actual Inches 14 16 18 20 24

Series Vic-300 300 psi

AGS Series Vic-300 With Gear Operator ‡ With “E” or “T” Aprx. Weight Each Price Each Lbs 1182-20 156.0 $10561.50 201.0 12256.00 217.7 15455.50 384.2 21257.50 605.0 24646.00

Gear Operator Options † Series Vic-300 With Series Vic-300 With Gear Oper. ‡ and Gear Oper. ‡ and Memory Stop † with “E” Chainwheel with “E” or “T” or “T” 1582-21 1582-22 $11395.00 $12410.00 13082.00 14018.00 16283.50 17211.50 22091.00 22597.00 25470.00 25815.50

Size Code 140 160 180 200 240

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. ‡ 2” nut, in lieu of handwheel, available at no additional charge. Specify clearly on order. Gear Operators available with both memory stop and chain wheel - add both adders (1 _ _ _ - 24). NOTE: When ordered separately, chain wheels and memory stops are non-cancellable and non-returnable.

V - 180 - 1 5 8 2 - 20

Act. Type In./mm

V

14/350 16/400 18/450 20/500 24/600

Size Code

Pressure Rating

Body

140 3 - 300 psi (3) 5 - PPS Coated Iron 160 180 9 - Special* 200 240

Closure Coupling Gasket Grade

3 - Iron disc w/fluoroelastomer Seat/ Stainless Steel stems - "O" 7 - Iron disc w/Nitrile Seat/Stainless Steel stems - “T" 8 - Iron disc w/EPDM Seat/Stainless Steel stems - "E" 9 - Special*

Bracket

0 - No Bracket 2 - Standard 9 - Special*

Accessories*

SECTION 4 GROOVED IPS PIPE VALVES

† Must be ordered at time of purchase. This option is not designed for field installation.

00 - Bare 20 - Gear operator 21 - Gear operator with memory stop 22 - Gear operator with chain wheel 23 - Gear operator with AWWA square operating nut 24 - Gear operator with memory stop and chain wheel 29 - Non-std. gear operator* 9 - Special*

*Details required

VICTAULIC.COM PL2016-GENERAL-C

4-5


Grooved IPS Pipe Valves Series W709 AGS Butterfly Valve

AGS Butterfly Valve

SERIES W709 – 150 PSI

Size Actual Inches 26 28 30 32 36 40 42 46 48

SERIES W709

Refer to publication 20.07

Aprx. Weight Each

Series W709 with Gear Operator

Lbs 859.8 1024.9 1300.4 1608.9 2159.9 3151.7 3438.2 4430.0 4749.6

Price Each + + + + + + + + +

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability.

Series 706 (14 – 24”) 300-psi Butterfly Valve

300-psi Butterfly Valve

SERIES 706 300-PSI BUTTERFLY VALVES

SECTION 4 GROOVED IPS PIPE VALVES

SERIES 706 Aprx. Weight Each

Size Actual Inches 14 16 18 20 24

Size Code 140 160 180 200 240

Lbs 125.0 153.0 199.0 285.0 451.0

Series 706 Bare Valve Series 706 ‡ Bare Valve With “E” or ‡ “T” With “O” 3182-00 $12654.00 14772.00 17546.00 20480.50 24721.00

3132-00 $15338.50 21514.00 22823.50 26781.50 35115.50

Size

Series 706 300 psi

Actual Inches 14 16 18 20 24

Aprx. Weight Each Lbs 152.0 187.0 257.0 355.0 522.0

Series 706 With Series 706 Gear With Operator ‡ Gear With “E” or Operator ‡ “T” With “O” 3182-20 $21260.50 26448.50 33141.00 40955.50 57365.50

3132-20 $22066.00 33192.00 38417.50 47257.00 67758.50

Gear Operator Options ‡ Size Code 140 160 180 200 240

Memory Stop † + + + + +

Chain Wheel $4473.00 4473.00 4473.00 4473.00 4473.00

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability. ‡ 2” nut, in lieu of handwheel, available at no additional charge. Specify clearly on order. Important: Series 706 valves must not be used with AGS products. Series W761 Vic-300 AGS butterfly valves and Series W709 butterfly valves must be used on Advanced Groove System (AGS) piping systems. Gear Operators available with both memory stop and chain wheel - add both adders (1 _ _ _ - 24). NOTE: When ordered separately, chain wheels and memory stops are non-cancellable and non-returnable.

See AGS Vic-300/Series 706 Valve Figure Numbering Chart on previous page. Series 700 Butterfly Valve

4-6

VICTAULIC.COM PL2016-GENERAL-C


Grooved IPS Pipe Valves Butterfly Valve

SERIES 700 – 200 PSI

Nominal Size

SERIES 700

Refer to publication 08.05

Valve with Two Position Padlockable Handle Aprx. Wgt. Stainless Steel Each Standard Trim Trim Lbs Price Each Price Each 2.8 $909.00 $1628.50 3.3 968.00 1628.50 6.4 1225.00 1664.50 6.8 1385.00 1725.00 12.1 1923.50 2376.50 26.1 2777.50 – 32.5 3023.50 3653.50

Size Code 014 020 024 030 040 050 060

Inches 1Z\x 2 2Z\x 3 4 5 6

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. Series 700 are available with chainwheels. Contact Victaulic for details. ‡ 2” nut, in lieu of handwheel, available at no additional charge. Specifiy clearly on order (2 _ _ _ -DD) - see Valve Numbering System on next page.

V - 020 - 2 A A A - 1O

Nom. Size Type In./mm Code

V

Seat/Liner

Disc & Trim

Body Style

014 2 - 200 psi A - Grade “E” (EPDM) A - Al-Bronze rubber-lined steel B - Stainless steel 020 B - Grade “T” (Nitrile) C - Chrome plated 024 rubber-lined steel Al-Bronze 030 040 9 - Special* 050 060

A - Standard

Operator

10 - Two Position Lever Handle

SECTION 4 GROOVED IPS PIPE VALVES

1½/40 2/50 2½/65 3/80 4/100 5/125 6/150

Pressure Rating

NOTE: * Details required

Series 7A2 Butterfly Valve Series 7B2 Butterfly Valve

Butterfly Valve

SERIES 7B2

Nominal Size

SERIES 7B2

Refer to publication 10.12

Inches 2Z\x 3 4 6 8 10

With Gear Operator Aprx. Wgt. Each Lbs 9.8 10.5 16.5 25.2 59.0 96.0

Price Each Without Tap $2662.50 2731.00 3084.50 4940.00 7098.50

With Tap $2662.50 2731.00 3084.50 4474.50 4940.00 7098.50

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability.

VICTAULIC.COM PL2016-GENERAL-C

4-7


Grooved IPS Pipe Valves Series 726 Grooved End Ball Valve

Grooved End Ball Valve

SERIES 726 – PLATED STEEL OR STAINLESS STEEL TRIM

Nominal Size Inches

SERIES 726

Refer to publication 08.23 1000 psi 1Z\x 2 2Z\x 3 800 psi 4 6

1Z\x – 3”

1000 psi 1Z\x 2 2Z\x 3 800 psi 4 6 4 – 6”

Valve Complete Aprx. With Handle & Weight Each Tamper Resistant Lbs Lock/Seal Option WITH CARBON STEEL CHROME PLATED TRIM 1166-15 4.4 $668.50 6.5 786.00 10.4 1973.50 14.9 2841.00 8166-15 41.5 $4084.50 78.5 15614.00 WITH STAINLESS STEEL TRIM 1126-15 4.8 $982.00 7.5 1141.00 11.6 2465.00 17.2 3403.00 8126-15 45.0 $4913.50 82.0 16857.50

Valve * Complete With Gear Operator 1166-20 + $7325.50 + 4839.00 8166-20 $6082.00 17741.00 1126-20 + + + $5400.00 8126-20 $6912.50 18987.00

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

SECTION 4 GROOVED IPS PIPE VALVES

Series 726 valves are available with electric, pneumatic, and hydraulic actuators or chain wheels. Contact Victaulic for details. + Quoted on application. Contact Victaulic for pricing and availability.

Series 721 Grooved End Ball Valve

Grooved End Ball Valve

SERIES 721 GROOVED END BALL VALVE

Aprx. Weight Each Lbs 32.4 75.0

Nominal Size Inches 4 6

SERIES 721

Refer to publication 08.14

Valve Complete With 2-Position Handle Price Each $5108.00 19529.00

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

B - 040 - 8

Act. Size Type In./mm Code

B

4-8

Pressure Rating

4/100 040 8 - 800 psi/ 1 - Iron 5515 kPa 6/150 060

Body

Ball & Stem

6 - Carbon steel, chrome plate

6 6 6 - 15

Seat

6 - Reinforced TFE

Operator

15 - 2 Position handle

VICTAULIC.COM PL2016-GENERAL-C


Grooved IPS Pipe Valves Series 727 Ball Valve

Ball Valve 1500 psi

SERIES 727 – BARE VALVE WITH CARBON STEEL OR STAINLESS STEEL TRIM

Nominal Size

Aprx. Wgt. Each

Inches

Lbs

2 2Z\x 3 4 6

7.2 11.2 16.8 36.3 86.5

3 4

17.6 37.4

SERIES 727

Refer to publication 08.42

Bare Valve Groove x Groove

Price Each Bare Valve with Bare Valve with Bare Valve with Carbon Steel Bare Valve with Stainless Steel Carbon Steel Trim and Freeze Stainless Steel Trim and Freeze Trim Port Option Trim Port Option Grooved x Grooved $1929.00 $2064.50 $2025.00 $2167.50 5005.50 – 5256.50 – 3416.00 3656.00 3587.50 3838.50 5638.50 6033.50 6134.00 6335.50 14682.00 – 16885.00 – Grooved x Threaded $3587.50 $3800.00 $3897.50 $4030.50 5920.50 6105.50 6325.00 6652.50

SERIES 727 – LEVER HANDLE WITH CARBON STEEL OR STAINLESS STEEL TRIM

Aprx. Wgt. Each

Nominal Size

Lbs

2 2Z\x 3 4 6

8.4 12.4 18.0 37.5 87.7

3 4

18.8 38.5

Lever Handle with Stainless Steel Trim and Freeze Port Option $2191.50 – 3866.50 6362.50 – $4058.00 6679.00

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. When ordered separately, handles and locking device kits are non-cancellable and non-returnable.

SECTION 4 GROOVED IPS PIPE VALVES

With Lever Handle

Inches

Price Each Lever Handle with Carbon Lever Handle Steel Trim and Lever Handle with Carbon Freeze Port with Stainless Steel Trim Option Steel Trim Grooved x Grooved $1953.50 $2088.00 $2050.00 5030.50 – 5280.00 3444.50 3683.50 3615.00 5667.00 6061.50 5949.00 14738.50 – 16940.00 Grooved x Threaded $3615.00 $3866.50 $3794.50 5949.00 6362.50 6245.00

Series 722 Threaded Brass Ball Valve

Ball Valve SERIES 722

(Threaded) 600 psi (WOG) Refer to publication 08.15

SERIES 722 – BALL VALVE

Nominal Size Inches Z\v C\, Z\x C\v 1 1Z\v 1Z\x 2

Aprx. Wgt. Each Lbs 0.2 0.3 0.4 0.7 1.0 1.5 2.1 2.4

Price Each $59.00 63.00 76.00 105.50 155.50 250.50 322.00 409.50

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. UL Listed, FM Approved in Z\x” and larger sizes.

VICTAULIC.COM PL2016-GENERAL-C

4-9


Grooved IPS Pipe Valves Series 712 Swing Check Valve

Check Valve

Series 712 Swing check valve is available with Grade “E”, “T” or “O” seat, bumper and bonnet closure gasket. Specify choice on order. Contact Victaulic for details.

SERIES 712

Swinger check valves are supplied with bonnet cap drilled and tapped with Z\x” NPT pipe plug for chemical injection or other auxillary connections.

Refer to publication 08.11

SERIES 712 – GRADE “E” OR “T” OR GRADE “O” WITH DUCTILE IRON BODY

Size Inches 2 2Z\x 3 4

Aprx. Wgt. Ea. Lbs 11.6 18.0 22.5 38.0

Grade “E” or “T” Price Each $1126.50 1431.50 1647.50 2328.00

Grade “O” Fluoroelastomer Price Each $1942.50 2446.50 2602.50 3798.50

Series 712 Swinger check valve is available with “E”, “T” or Grade “O” Fluoroelastomer set, bumper and bonnet closure gasket. Specify choice on order. Contact Victaulic for details. NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability. SERIES 712 DISC KIT

Size Inches 2 2Z\x 3 4

Disc Kit Grade “E” or “T” $489.00 619.00 712.50 1006.00

Grade “O” $839.50 1055.50 1123.00 1403.50

SECTION 4 GROOVED IPS PIPE VALVES

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

4-10

Series 713 High Pressure Check Valve

High Pressure Check Valve SERIES 713

Refer to publication 08.11

SERIES 713 – GRADE “E” OR “T” WITH DUCTILE IRON BODY

Size Inches 2

Aprx. Weight Each Lbs 11.6

Grade “E” or “T” Price Each $1448.50

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

VICTAULIC.COM PL2016-GENERAL-C


Grooved IPS Pipe Valves Series 377 Valve

Balancing Plug Valve SERIES 377

(AWWA Dimensions) Use with Style 307 Transition coupling for IPS pipe. Refer to publication 08.12

SERIES 377 – BALANCING PLUG VALVE

Nominal Size Inches 3 4 6 8 (100 – 175 psi) 10 12

With Lever Operator Aprx. Wgt. Each Lbs 47.0 54.0 89.0 – – –

Price Each $4990.50 5171.50 6203.00 – – –

With Gear Operator Aprx. Gear Operator Wgt. Each Style Lbs MX 39.0 MX 46.0 MZ 90.0 MZ 140.0 MV 218.0 MA 308.0

Price Each $7840.50 8198.00 9219.00 14295.00 17283.00 25956.50

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. Series 377 Plug Valve offers throttling function and does not include flow measurement. # AWWA sized grooved ends. For use in NPS systems, use Style 307 transition couplings. Available standard with EPDM (Grade “E”) or Nitrile (Grade “T”). Specify choice on order. Coated plug, welded nickel seat and lever or gear operator complete with memory stop.

Series 716H/716 Vic-Check® Valve

Vic-Check Check Valve SERIES 716H/716

Refer to publication 08.08

Nominal Size Inches 2 2Z\x 3 4 5 6 8 10 12

Size Code 020 024 030 040 050 060 080 100 120

Aprx. Weight Each Lbs 10.7 3.6 4.5 16.0 20.0 28.0 40.0 100.0 140.0

“E” or “T” Price Each $1291.00 1294.50 1413.50 1936.00 2539.00 2992.00 4271.00 10275.50 12177.50

“O” Price Each $1369.00 + + 2263.00 + + + + +

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. For Series 716 sizes 4 –12” only – Drilling, tapping and plugs are available. Contact Victaulic for pricing and delivery. Valves come standard untapped – optional two Z\x” NPT drain holes. One hole on each side of seat also available as an option.

SECTION 4 GROOVED IPS PIPE VALVES

Series 716H 2 – 3”

SERIES 716H/716 – VIC-CHECK CHECK VALVE

+ Quoted on application. Contact Victaulic for pricing and availability.

Series 716 4 – 12”

VICTAULIC.COM PL2016-GENERAL-C

4-11


Grooved IPS Pipe Valves Series W715 AGS Vic-Check Valve

Dual Disc Vic-Check Valve

AGS SERIES W715 – VIC-CHECK CHECK VALVE

Aprx. Weight Each Lbs 140.0 160.0 180.0 200.0 240.0

Nominal Size Inches 14 16 18 20 24

AGS SERIES W715

Refer to publication 20.08

Grade “E” Price Each $9993.50 13532.00 15787.00 21268.50 31051.00

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

Series 779 Venturi Check Valve

Venturi Check Valve SERIES 779

SECTION 4 GROOVED IPS PIPE VALVES

Refer to publication 08.10

SERIES 779 – VENTURI CHECK VALVE

Nominal Size Inches 4 5 6 8 10 12

Aprx. Weight Each Lbs 16.0 20.0 28.0 40.0 100.0 140.0

Size Code 040 050 060 080 100 120

Valve * Complete Price Each $3007.00 3888.50 4063.00 5342.00 11168.00 13070.00

Flow Measuring Kit ONLY Price Each $861.00 861.00 861.00 861.00 861.00 861.00

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. * Valve complete includes Venturi Check valve, drilled, tapped and plugged with Flow Measuring Kit enclosed (field assembly required). Flow Measuring Kit includes extension nipples, bronze access valves, quick disconnect for meter connection and flow chart tag to affix to the valve. NOTE: Valve comes with two Z\,” NPT drain holes and plug, one hole on each side of valve.

C - 040 - 1 4

Act. Type In./mm

C

2½/657 76.1 mm 3/807 4/100 5/125 139.7 mm 6/150 165.1 mm 8/200 10/250 12/300

Size Code

Body Material

024 1 - D.I. 076 3 - Coated D.I.* 030 040 050 9 - Special* 139 060 165 080 100 120

Disc

1 - All-Bronze with EPDM¹ 2 - All-Bronze with Nitrile1 3 - All-Bronze with Viton1 4 - D.I. with EPDM Encapsulation3 5 - D.I. with Nitrile Encapsulation3 6 - D.I. with Fluoroelastomer Encapsulation3

1 0 - 02

Seat

Agency

Accessories

1 - Nickel ** 0 - None 00 - None 2 - PPS coated D.I.1 02 - Flow Measuring Kit (Series 779)4,5 05 - ½" Taps with Plugs for Drains5,6 06 - 2" Drain Tap with ¼" Taps on Bottom of Valve 25 - Flow Measuring Kit with Drains

9 - Special*

NOTES: * Details must be provided with order 1 - 2½"/65 mm, 76.1 mm and 3"/80 mm sizes only 3 - Sizes 4 – 12"/100 – 300 mm only 4 - This code is for Series 779 valves only (Example: C-060-1410-02) 5 - Sizes 4 – 12"/100 – 300 mm only 6 - Includes two ½" taps on bottom of valve – one each upstream and downstream of disc 7 - Size Limitations: 76.1 mm and 3"/80 mm sizes are not available in Series 779 configurations ** - 4"/100 mm and larger are always nickel

4-12

VICTAULIC.COM PL2016-GENERAL-C


Grooved IPS Pipe Valves Triple Service BFV/Check Valve Combination

Triple Service BFV/Check Valve Combination WITHOUT VENTURI FLOW MEASUREMENT PORTS 300 PSI & 230°F

Refer to publication 08.09 for Triple Service Assemblies.

TRIPLE SERVICE BFV/CHECK VALVES (WITHOUT VENTURI FLOW MEASUREMENT PORTS)

Pump Discharge Line Nominal Size Inches

2Z\x

3

4

† 5

8

10

12

SECTION 4 GROOVED IPS PIPE VALVES

6

Aprx. Aprx. Combination with Triple Service Combination Wgt. Combination with Wgt. Gear Valve Components Each Lever Handle & Each Operator & Valve/Coupling/Check Lbs Memory Stop Lbs Memory Stop Without Venturi Flow Measurement Ports Vic-300 MasterSeal™ Std Trm 7.5 7.5 S/107H QuickVic Rigid Cplg Ptd 2.6 2.6 w/”EHP” Gskt S/716 Vic-Check Valve Ptd “E” Disc 3.6 3.6 Total BFV/Check Combination 13.7 $2782.00 13.7 $4065.50 Vic-300 MasterSeal™ Std Trm 8.5 8.5 S/107H QuickVic Rigid Cplg Ptd 3.0 3.0 w/”EHP” Gskt S/716 Vic-Check Valve Ptd “E” Disc 4.5 4.5 Total BFV/Check Combination 16.0 $2969.00 16.0 $4261.50 Vic-300 MasterSeal™ Std Trm 11.8 11.8 S/107H QuickVic Rigid Cplg Ptd 5.3 5.3 w/”EHP” Gskt S/716 Vic-Check Valve Ptd “E” Disc 16.0 16.0 Total BFV/Check Combination 33.1 $4068.50 33.1 $5162.00 Vic-300 MasterSeal™ Std Trm 20.0 20.8 S/107H QuickVic Rigid Cplg Ptd 6.7 6.7 w/”EHP” Gskt S/716 Vic-Check Valve Ptd “E” Disc 20.0 20.0 Total BFV/Check Combination 46.7 $5578.00 47.5 $7107.50 Vic-300 MasterSeal™ Std Trm 23.2 24.0 S/107H QuickVic Rigid Cplg Ptd 8.3 8.3 w/”EHP” Gskt S/716 Vic-Check Valve Ptd “E” Disc 28.0 28.0 Total BFV/Check Combination 59.5 $6292.00 60.3 $7710.00 Vic-300 MasterSeal™ Std Trm 37.5 38.3 S/107H QuickVic Rigid Cplg Ptd 15.1 15.1 w/”EHP” Gskt S/716 Vic-Check Valve Ptd “E” Disc 40.0 40.0 Total BFV/Check Combination 92.6 $8470.50 93.4 $9567.50 Vic-300 MasterSeal™ Std Trm 84.0 81.5 S/07 Zero-Flex Rigid Cplg Ptd w/”E” 23.5 23.5 Gskt S/716 Vic-Check Valve Ptd “E” Disc 100.0 100.0 Total BFV/Check Combination 207.5 $18321.00 205.0 $18321.00 Vic-300 MasterSeal™ Std Trm 100.0 97.5 S/07 Zero-Flex Rigid Cplg Ptd w/”E” 28.2 28.2 Gskt S/716 Vic-Check Valve Ptd “E” Disc 140.0 140.0 Total BFV/Check Combination 268.2 $21371.00 265.7 $22121.00

† Victaulic Series 377 Plug and Series 716 Check Valve Triple Service Combinations are available as well as the Butterfly & Check Valve Combination shown above.

VICTAULIC.COM PL2016-GENERAL-C

4-13


Grooved IPS Pipe Valves AGS Triple Service BFV/Check Valve Combination

AGS Triple Service BFV/Check Valve Combination WITHOUT VENTURI FLOW MEASUREMENT PORTS 300 PSI & 230°F

Refer to publication 20.18 for Triple Service Assemblies.

AGS TRIPLE SERVICE BFV/CHECK VALVES (WITHOUT VENTURI FLOW MEASUREMENT PORTS)

Pump Discharge Line Nominal Size (Inches) 14

16

18

SECTION 4 GROOVED IPS PIPE VALVES

20

4-14

24

Aprx. Combination Triple Service Combination Wgt. with Gear Valve Components Each Operator & Valve/Coupling/Check Lbs Memory Stop Without Venturi Flow Measurement Ports Vic-300 MasterSeal™ AGS Std Trm 143.7 S/W07 AGS Rigid Cplg Ptd w “E” Gskt 48.9 S/W715 AGS Vic-Check Valve Ptd 140.0 “E” Disc Total BFV/Check Combination 332.6 $21249.00 Vic-300 MasterSeal™ AGS Std Trm 171.7 S/W07 AGS Rigid Cplg Ptd w “E” Gskt 60.8 S/W715 AGS Vic-Check Valve Ptd 160.0 “E” Disc Total BFV/Check Combination 392.5 $26797.00 Vic-300 MasterSeal™ AGS Std Trm 217.7 S/W07 AGS Rigid Cplg Ptd w “E” Gskt 71.2 S/W71 AGS Vic-Check Valve Ptd “E” 180.0 Disc Total BFV/Check Combination 468.9 $32367.00 Vic-300 MasterSeal™ AGS Std Trm 333.0 S/W07 AGS Rigid Cplg Ptd w “E” Gskt 81.7 S/W715 AGS Vic-Check Valve Ptd 200.0 “E” Disc Total BFV/Check Combination 614.7 $44097.00 Vic-300 MasterSeal™ AGS Std Trm 521.5 S/W07 AGS Rigid Cplg Ptd w “E” Gskt 116.2 S/W715 Vic-Check Valve Ptd “E” Disc 240.0 Total BFV/Check Combination 877.7 $57415.50

VICTAULIC.COM PL2016-GENERAL-C


Grooved IPS Pipe Valves Triple Service BFV/Check Valve Combination with Venturi Flow Measurement Ports

Triple Service BFV/Check Valve Combination WITH VENTURI FLOW MEASUREMENT PORTS 300 PSI & 230°F

TRIPLE SERVICE BFV/CHECK VALVES WITH VENTURI FLOW MEASUREMENT PORTS AND KIT

Pump Discharge Line Nominal Size Inches

Refer to publication 08.09 for Triple Service Assemblies. 4

5

6 †

10

12

Aprx. Wgt. Combination with Each Lever Handle & Lbs Memory Stop Measurement Ports 11.8 5.3 16.0 33.1

$5114.00

20.0 6.7 20.0 46.7

$6896.50

$7338.00

$8798.50

$6207.50

20.0 47.5

$7985.50

28.0 60.3

$8755.50

40.0 93.4

$10614.00

81.5 23.5

$19290.50

100.0 28.2 140.0 268.2

16.0 33.1

38.3 15.1

84.0 23.5 100.0 207.5

11.8 5.3

24.0 8.3

37.5 15.1 40.0 92.6

Combination with Gear Valve Operator & Memory Stop

20.8 6.7

23.2 8.3 28.0 59.5

Aprx. Wgt. Each Lbs

100.0 205.0

$19290.50

SECTION 4 GROOVED IPS PIPE VALVES

8

Triple Service Combination Components Valve/Coupling/Check With Venturi Flow Vic-300 MasterSeal™ Std Trm S/107H QuickVic Rigid Cplg Ptd w/”EHP” Gskt S/779 Venturi Check Valve Ptd “E” Disc Total BFV/Venturi/Check Combination Vic-300 MasterSeal™ Std Trm S/107H QuickVic Rigid Cplg Ptd w/”EHP” Gskt S/779 Venturi Check Valve Ptd “E” Disc Total BFV/Venturi/Check Combination Vic-300 MasterSeal™ Std Trm S/107H QuickVic Rigid Cplg Ptd w/”EHP” Gskt S/779 Venturi Check Valve Ptd “E” Disc Total BFV/Venturi/Check Combination Vic-300 MasterSeal™ Std Trm S/107H QuickVic Rigid Cplg Ptd w/”EHP” Gskt S/779 Venturi Check Valve Ptd “E” Disc Total BFV/Venturi/Check Combination Vic-300 MasterSeal™ Std Trm S/07 Zero-Flex Rigid Cplg Ptd w/”E” Gskt S/779 Venturi Check Valve Ptd “E” Disc Total BFV/Venturi/Check Combination Vic-300 MasterSeal™ Std Trm S/07 Zero-Flex Rigid Cplg Ptd w/”E” Gskt S/779 Venturi Check Valve Ptd “E” Disc Total BFV/Venturi/Check Combination

97.5 28.2

$22341.50

140.0 265.7

$23091.00

‡ Flow Measuring Kit includes extension nipples, bronze access valves, quick disconnects for meter connection (ISO 7241-1 Series B), flow chart tag to affix to the valve and instructions. † Victaulic Series 377 Plug & Series 779 Venturi Check Valve Triple Service Combination also available as well as the Butterfly & Check Valve Combination shown above.

VICTAULIC.COM PL2016-GENERAL-C

4-15


Grooved IPS Pipe Valves Series 725 Diverter Valve

Diverter Valve SERIES 725

SERIES 725 – DIVERTER VALVE

Nominal Size

Refer to publication 08.40

Inches 6

Series 725 with Electric Actuator Aprx. Weight Each Lbs Price Each 1250.0 $93250.50

Series 725 with Gear Operator Aprx. Weight Each Lbs Price Each 980.0 $64311.00

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

V 060 725 M 1 G

Class Size

V

SECTION 4 GROOVED IPS PIPE VALVES

with Electric Actuator

4-16

060

Style

725

Operator

Operator Options

M – Manual Gear M – Hand Wheel E – Electric Actuator N – Chain Wheel O – Other E – Electrical Phases

End Prep

1 – Grooved (OGS) 2 – ES EndSeal™ 3 – Other Specify

1 – 480V, 60Hz, 3 phase 2 – 575V, 60 Hz, 3 phase 3 – 380V, 50 Hz, 3 phase 4 – 380V, 60 Hz, 3 phase 5 – 220V, 60 Hz, 3 phase 6 – 400V, 50 Hz, 3 phase 7 – 415V, 50 Hz, 3 phase

with Gear Operator

Series 731-D Suction Diffuser

VICTAULIC.COM PL2016-GENERAL-C


Grooved IPS Pipe Valves Suction Diffusers SERIES 731-D

Refer to publication 09.20

SERIES 731-D – SUCTION DIFFUSERS

Aprx. Wgt Each Lbs 20.1 26.0 27.7 29.7 31.6 34.6 46.2 46.2 49.4 52.3 64.0 67.3 70.3 98.5 102.1 110.7 150.6 159.9 172,0 245.4 260.3 273.2

Centerline of Inlet Pipe to Flange Face Inches 6.30 6.30 6.30 7.40 7.40 7.40 8.40 8.40 8.40 8.40 9.00 9.00 9.00 10.20 10.20 10.20 12.40 12.40 12.40 15.43 15.43 15.43

Price Each $2990.50 3002.50 3238.50 3609.00 3568.00 3790.50 3211.00 5001.50 4942.50 4994.00 4697.50 4825.50 5817.50 7212.00 8050.50 9929.00 14458.50 14515.50 14967.00 18673.00 19029.50 20815.50

Start up baskets are available – for pricing contact Victaulic. NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

Series W731-D AGS Suction Diffuser

Suction Diffuser AGS SERIES W731-D

Refer to publication 20.20

AGS SERIES W731-D – SUCTION DIFFUSER

Grvd. End Inlet x Vic-Flange Adapter Outlet Nominal Size Inches 14 x 10 12 14 16 x 12 14 16 18 x 14 16 18 20 x 16 18 20 24 x 18 20 24

Aprx. Wgt Each Lbs 328.9 345.8 367.6 464.5 489.9 514.2 788.6 812.9 828.3 955.0 970.5 1019.0 1255.8 1337.4 1401.3

Centerline of Inlet Pipe to Flange Face Inches 16.1 16.1 16.1 19.6 19.6 19.6 21.7 21.7 21.7 24.4 24.4 24.4 26.4 26.4 26.4

SECTION 4 GROOVED IPS PIPE VALVES

Grvd. End Inlet x Vic-Flange Adapter Outlet Nominal Size Inches 3 x 2 2Z\x 3 4 x 2Z\x 3 4 5 x 2Z\x 3 4 5 6 x 4 5 6 8 x 5 6 8 10 x 6 8 10 12 x 8 10 12

ANSI Class 150 $19252.00 20980.50 21766.00 27488.00 28561.00 29627.50 38255.00 39333.00 40806.50 50438.00 50907.50 52898.50 70965.00 72835.00 75409.00

Start up baskets are available – for pricing contact Victaulic. NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

VICTAULIC.COM PL2016-GENERAL-C

4-17


Grooved IPS Pipe Valves Series 730 Vic-Strainer Tee-Type Strainer

Tee-Type Strainer SERIES 730

Refer to publication 09.02

SERIES 730 – TEE-TYPE STRAINER

Nominal Size Inches 1Z\x 2 2Z\x 3 4 5 6 8 10 12 14 ‡ 16 ‡ 18 ‡ 20 ‡ 24 ‡ 30 ‡

Aprx. Weight Each Lbs 7.0 8.0 9.0 21.0 20.5 31.0 44.0 90.6 136.0 197.0 300.0 350.0 400.0 565.0 830.0 1273.0

Standard Basket Only Price Each + $1046.00 1167.50 1167.50 1517.50 + 2190.00 2764.00 4049.50 3221.50 + + + + + +

Price Each Standard * Galvanized $1976.00 $2548.50 2457.50 2819.50 2917.50 3349.00 3159.50 3723.50 3773.00 4406.50 4117.00 4886.00 4994.50 5985.50 8039.50 11451.50 10908.00 + 12314.50 + 65105.00 + 82827.00 + 86554.00 + + + + + + +

Fine Mesh Basket Only † Price Each + + + + + + + + + + + + + + + +

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability.

SECTION 4 GROOVED IPS PIPE VALVES

* Vic-Strainer Series 730 standard components include ductile iron body, access cap and coupling (with Grade “E” EPDM gasket, plated bolts and nuts) and Type 304 stainless steel basket. Contact Victaulic for details. Series 730 supplied with an NPT tap and plug to accommodate a drain or blow-down valve. NOTE: Series 730 Vic-Strainers in sizes 14 – 24” have a standard groove for retrofit only and must not be used with Advanced Groove System (AGS) products. Contact Victaulic for pricing and availability.

Series W730 AGS Vic-Strainer Tee Type Strainer

Tee-Type Strainer AGS SERIES W730

Refer to publication 20.11

AGS SERIES W730 – TEE-TYPE STRAINER

Nominal Size Inches 14 16 18 20 24

Aprx. Weight Each Lbs 300.0 350.0 400.0 565.0 830.0

Price Each Standard * $47254.00 58142.50 60759.00 78298.50 96060.50

Standard Basket Only Price Each + + + + +

Fine Mesh † Basket Only Price Each + + + + +

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability. * Vic-Strainer Series W730 AGS standard components include ductile iron body, access cap and coupling (with Grade “E” EPDM gasket, plated bolts and nuts) and Type 304 stainless steel basket. Contact Victaulic for details. Series W730 supplied with an NPT tap and plug to accommodate a drain or blow-down valve. † Contact Victaulic for application and pricing information. 6 mesh screens standard for 14 – 16”, and 4 mesh for 18 – 24”.

4-18

VICTAULIC.COM PL2016-GENERAL-C


Grooved IPS Pipe Valves Series 732 Vic-Strainer Wye Type Strainer

Grooved End Vic-Strainer SERIES 732

Refer to publication 09.03

SERIES 732 – GROOVED END VIC-STRAINER

Nominal Size Inches 2 2Z\x 3 4 5 6 8 10 12

Aprx. Weight Each Lbs 10.0 14.0 20.0 32.0 50.0 72.0 125.0 205.0 280.0

Standard Fine Perforated Basket Only Basket Only Price Each $283.50 + 301.00 + 360.50 + 461.00 + 873.50 + 1167.50 + 1936.00 + 2437.50 + 2840.50 +

Price Each Standard * Galvanized $1323.50 $1567.50 1398.00 1682.50 1688.50 2110.50 2167.00 2776.50 4113.50 5022.00 5510.50 6957.00 9169.00 11636.00 23093.50 27563.00 26912.50 32461.00

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability. * Vic-Strainer Series 732 standard components include ductile iron body, access cap and coupling (with Grade “E” EPDM or Nitrile Grade “T” gasket, plated bolts and nuts) and Type 304 stainless steel basket. Contact Victaulic for details. Series 732 supplied with an NPT tap and plug to accommodate a drain or blow-down valve.

Series W732 Vic-Strainer Wye Type Strainer

Wye Type Vic-Strainer Refer to publication 20.19

Nominal Size

Aprx. Weight Each

Inches 14 16 18

Lbs 425.0 600.0 800.0

Standard * $46309.00 56979.50 59544.00

Price Each Standard Basket Only $18258.50 22467.00 23263.50

Fine Perforated Basket Only † + + +

* Vic-Strainer Series W732 standard components include ductile iron body, access cap and coupling (with Grade “E” EPDM gasket, plated bolts and nuts) and Type 304 stainless steel basket. Contact Victaulic for details. Series W732 supplied with an NPT tap and plug to accommodate a drain or blow-down valve. † Contact Victaulic for application and pricing information. Standard stainless steel baskets are offered for the following sizes: 0.156”/4 mm diameter for holes 14 – 18”/350 – 450 mm sizes. NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

SECTION 4 GROOVED IPS PIPE VALVES

SERIES W732

SERIES W732 – WYE TYPE VIC-STRAINER

+ Quoted on application. Contact Victaulic for pricing and availability.

Style 150 Mover Expansion Joint

Mover Expansion Joint STYLE 150

Refer to publication 09.04

STYLE 150 – MOVER EXPANSION JOINT

Size Inches 2 3 4 5 6

Aprx. Weight Each Lbs 15.9 25.6 39.6 55.0 75.0

Maximum Available Expansion Inches 3 3 3 3 3

Grooved and Plain End “E” or “T” Price Each Painted Galv. $3184.50 + 3765.50 + 4712.50 + 8567.00 + 9863.50 +

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. Victaulic Style 150 Expansion Joints are supplied fully assembled, with a Grade “E” gasket for water services up to +230°F. For other gaskets and services consult Victaulic. Style 150 Expansion Joints are supplied with plain ends for installation using two Roust-A-Bout Style 99 couplings, or with grooved ends for installation using Victaulic Coupling Style 77, 75, HP-70 or 07 ZeroFlex™ couplings. NOTE: Style 155 Expansion Joints in sizes C\v – 24” are available. Style 155 Expansion Joints are non-cancellable and non-returnable. Contact Victaulic for details. + Quoted on application. Contact Victaulic for pricing and availability.

VICTAULIC.COM PL2016-GENERAL-C

4-19


Grooved IPS Pipe Valves Style 156 Assembly Header

Assembly Header STYLE 156

2"

2 x 1" R R

Style 730

Vic-Header - Style 156

R

2"

R

R

2 x 1"

2 x 1"

R

R R

Style 730

SECTION 4 GROOVED IPS PIPE VALVES

R

4-20

2 2 3 3

Vic-Header - Style 156

Vic-Header - Style 156

R

R

R

R

R

Complete VicHeader with Vic-Header with Strainer and Isolation BF Vic-Header with Ball Isolation Valve Valve Strainer Vic-Header Only Nominal Size Valves & Grade “E” or “T” Grade “E” or “T” Grade “E” or “T” Grade “E” or “T” Main x Outlet Outlets Gasket Gasket Gasket Gakset Aprx. Aprx. Aprx. Aprx. Wgt. Wgt. Wgt. Wgt. Ea. Price Ea. Price Ea. Price Ea. Price Inches Quantity Lbs Each Lbs Each Lbs Each Lbs Each x 1 3 32 $5317.50 32 + 26 $4867.50 16 $1843.50 x 1 x 1Z\x 3 32 + 32 + 26 + 16 2271.00 x 1 x 1Z\x 3 32 + 32 + 26 + 16 2355.50 x 1 x 2 3 32 + 32 $2685.00 26 + 16 +

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. Victaulic Style 150 Expansion Joints are supplied fully assembled, with a Grade “E” gasket for water services up to +230°F. For other gaskets and services consult Victaulic. Style 150 Expansion Joints are supplied with plain ends for installation using two Roust-A-Bout Style 99 couplings, or with grooved ends for installation using Victaulic Coupling Style 77, 75, HP-70 or 07 ZeroFlex™ couplings. NOTE: Style 155 Expansion Joints in sizes C\v – 24” are available. Style 155 Expansion Joints are non-cancellable and non-returnable. Contact Victaulic for details. + Quoted on application. Contact Victaulic for pricing and availability.

VICTAULIC.COM PL2016-GENERAL-C


Grooved IPS Pipe Valves

SECTION 4 GROOVED IPS PIPE VALVES

VICTAULIC.COM PL2016-GENERAL-C

4-21


4-22

VICTAULIC.COM PL2016-GENERAL-C


SECTION 5 – Hydronic Balancing Products

Hydronic Balancing Products

VICTAULIC.COM PL2016-GENERAL-C

5-1


Hydronic Balancing Products Manual Balancing Valves TA Series 786 STAS – Solder End

Manual Balancing Valves TA Series 786 STAS

Solder End (300 psi) Refer to publication 08.16

TA SERIES 786 – STAS

Nominal Size Inches Z\x C\v 1 1Z\v 1Z\x 2

Approx. Wgt. Ea. Lbs 1.4 1.4 1.9 2.4 3.1 4.5

Victaulic Part Code V-004-786-CBV V-006-786-CBV V-010-786-CBV V-012-786-CBV V-014-786-CBV V-020-786-CBV

IMI TA Code 52-167-914 52-167-920 52-167-925 52-167-932 52-167-940 52-167-950

List Price $209.00 226.00 270.50 340.00 419.50 558.50

Approx. Wgt. Ea. Lbs 1.5 1.6 2.0 2.6 3.3 5.0

Victaulic Part Code V-004-787-CBV V-006-787-CBV V-010-787-CBV V-012-787-CBV V-014-787-CBV V-020-787-CBV

IMI TA Code 52-167-514 52-167-520 52-167-525 52-167-532 52-167-540 52-167-550

List Price $209.00 226.00 270.50 340.00 419.50 558.50

TA Series 787 STAD – NPT (Fem.) End – (300 psi)

TA Series 787 STAD

NPT (Fem.) End (300 psi) Refer to publication 08.16

TA SERIES 787 – STAD

Nominal Size Inches Z\x C\v 1 1Z\v 1Z\x 2

Series 78K STADK

Series 78K

SECTION 5 HYDRONIC BALANCING PRODUCTS

FPT End x MPT Union (400 psi) Refer to publication 08.16

SERIES 78K – STADK WITH UNION CONNECTION

Nominal Size Inches MPT Union x FPT Valve Z\x x Z\x C\v C\v x C\v 1 1 x 1 1Z\v 1Z\v x 1Z\v 1Z\x 1Z\x x 1Z\x 2 2 x 2

Victaulic Part Code V-004-78K-CBV V-X87-78K-CBV V-006-78K-CBV V-A61-78K-CBV V-010-78K-CBV V-Z90-78K-CBV V-012-78K-CBV V-Z91-78K-CBV V-014-78K-CBV V-J86-78K-CBV V-020-78K-CBV

Price Each $250.00 271.50 271.50 311.50 311.50 391.00 391.00 483.00 483.00 794.00 787.00

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. Optional tailpieces must be ordered for double or triple reductions. If needed, specify tailpiece option when ordering.

5-2

VICTAULIC.COM PL2016-GENERAL-C


Hydronic Balancing Products TA Series 788 STAF – Flanged End

TA Series 788 STAF

Flanged End (250 psi) Refer to publication 08.16

TA SERIES 788 – STAF

Nominal Size Inches 2Z\x 3 4 5 6 8 10 12 14 16

Approx. Wgt. Ea. Lbs 24.0 31.0 43.0 62.0 82.0 168.0 270.0 360.0 655.0 895.0

Victaulic Part Code V-024-788-CBV V-030-788-CBV V-040-788-CBV V-050-788-CBV V-060-788-CBV V-080-788-CBV V-100-788-CBV V-120-788-CBV V-140-788-CBV V-160-788-CBV

IMI TA Code 52-167-965 52-167-980 52-167-990 52-167-991 52-167-992 52-167-993 52-167-994 52-167-995 52-182-996 52-182-997

List Price $1640.50 2680.50 4621.50 6892.50 9110.50 15137.50 22736.50 47524.00 63617.00 69620.00

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

TA Series 789 STAG – Grooved End

TA Series 789 STAG

Grooved End (350 psi) Refer to publication 08.16

TA SERIES 789 – STAG

Nominal Size Inches 2Z\x 3 4 5 6 8 10 12

Approx. Wgt. Ea. Lbs 14.0 20.0 31.0 50.0 69.0 140.0 202.0 280.0

Victaulic Part Code V-024-789-CBV V-030-789-CBV V-040-789-CBV V-050-789-CBV V-060-789-CBV V-080-789-CBV V-100-789-CBV V-120-789-CBV

IMI TA Code 52-167-073 52-167-089 52-167-114 52-167-141 52-167-168 52-167-219 52-167-273 52-167-324

List Price $1388.00 2286.00 3919.50 5899.00 7819.50 15137.50 22736.50 47524.00

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

TA Series 786 and 787 Insulation Kits

TA Series 786 and 787 INSULATION KITS

TA SERIES 786 AND 787 – INSULATION KITS

Nominal Size Inches Z\x, C\v 1 1Z\v 1Z\x 2

Approx. Wgt. Ea. Lbs 0.5 0.5 0.5 0.5 0.5

Victaulic Part Code K-004-784-INS K-010-784-INS K-012-784-INS K-014-784-INS K-020-784-INS

List Price $75.50 80.50 91.00 97.50 108.00

VICTAULIC.COM PL2016-GENERAL-C

SECTION 5 HYDRONIC BALANCING PRODUCTS

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

5-3


Hydronic Balancing Products TA Series 788 and 789 Insulation Kits

TA Series 788 and 789 INSULATION KITS

TA SERIES 788 AND 789 – INSULATION KITS

Nominal Size Inches 2Z\x 3 4 5 6

Approx. Wgt. Ea. Lbs 0.8 2.0 2.0 2.0 2.0

Victaulic Part Code K-024-784-INS K-030-784-INS K-040-784-INS K-050-784-INS K-060-784-INS

IMI TA Code 52-189-865 52-189-880 52-189-890 52-189-891 52-189-892

List Price $1041.50 1147.00 1250.50 1516.00 1458.00

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

TA Series 786 Drain Kit

Kit 786-DK

TA SERIES 786 DRAIN KIT

DRAIN KIT FOR USE WITH TA SERIES 786 AND 787

Approx. Wgt. Ea. Lbs 2.0

Victaulic Part Code K-000-786-CBV

IMI TA Code 52-167-997

List Price $59.50

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

Spare Parts

Spare Parts

Nominal Size Inches Z\x – C\v * Z\x – 2 2Z\x – 12 2Z\x – 12 Z\x – 2 2Z\x – 6

Probe Port

Extended Probe Port

8 – 12

0

0

STAD

Z\x – 12

Without Valve

SECTION 5 HYDRONIC BALANCING PRODUCTS

Plastic Handwheel

5-4

Aluminum Handwheel

Victaulic IMI TA Part Code Code Replacement Probe Port Set K-000-785-012 52-167-813 K-000-740-003 52-179-810 K-000-740-002 52-179-811 Extended (2C\,”) Port Set K-000-740-001 52-179-812 Handwheel - Plastic P-004-784-001 52-186-009 P-024-784-001 52-186-098 Handwheel - Aluminum P-080-784-001 52-186-098 Measuring Probes P-000-738-100 307-635-62 Probes for Series 738 Differential Gauge Meter K-000-740-005 52-179-006

List Price $92.50 74.50 74.50 $128.50 $100.50 303.50 $2604.00 $394.00 $202.00

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

Automatic Balancing Valves Series 76T – Female x Female Threaded

VICTAULIC.COM PL2016-GENERAL-C


Hydronic Balancing Products Automatic Balancing Valves Victaulic automatic balancing valves are available as an alternative to manual balancing valves when ordering a Victaulic Koil-Kit™ Coil Pack. Contact Victaulic for details.

Series 76T FEMALE X FEMALE THREADED

Refer to publication 08.34

SERIES 76T

Nominal Size Inches Z\x C\v 1 1* 1Z\v 1Z\x 2

Aprox. Wgt. Ea. Lbs 1.3 1.3 1.5 3.4 3.4 3.4 3.7

Victaulic Part Code V-004-76T-0_ _ V-006-76T-0_ _ V-010-76T-0_ _ V-010-76T-H_ _ V-012-76T-0_ _ V-014-76T-0_ _ V-020-76T-0_ _

List Price $344.00 349.00 385.50 741.00 741.00 741.00 805.50

* Prices shown reflect an automatic balancing valve body with either high or low flow cartridge.

Series 76B – Female x Female Threaded with a Ball Valve Kit

Series 76B FEMALE X FEMALE THREADED WITH A BALL VALVE KIT

Refer to publication 08.34

SERIES 76B

Nominal Size Inches Z\x C\v 1 1* 1Z\v 1Z\x 2

Aprox. Wgt. Ea. Lbs 1.7 2.1 2.6 4.6 5.1 2.8 6.6

Victaulic Part Code V-004-76B-0_ _ V-006-76B-0_ _ V-010-76B-0_ _ V-010-76B-H_ _ V-012-76B-0_ _ V-014-76B-0_ _ V-020-76B-0_ _

List Price $559.50 568.50 661.00 1016.50 1147.00 1230.50 1441.00

* Prices shown reflect an automatic balancing valve body with either high or low flow cartridge.

Series 76K – Male x Female Threaded

Series 76K MALE X FEMALE THREADED

Refer to publication 08.34

SERIES 76K

Nominal Size Inches Z\x C\v 1 1* 1Z\v 1Z\x 2

Aprox. Wgt. Ea. Lbs 1.5 2.0 3.5 5.4 5.4 5.5 5.9

Victaulic Part Code V-004-76K-0_ _ V-006-76K-0_ _ V-010-76K-0_ _ V-010-76K-H_ _ V-012-76K-0_ _ V-014-76K-0_ _ V-020-76K-0_ _

List Price $473.00 537.00 537.00 889.50 870.00 1016.50 1024.00

VICTAULIC.COM PL2016-GENERAL-C

SECTION 5 HYDRONIC BALANCING PRODUCTS

* Prices shown reflect an automatic balancing valve body with either high or low flow cartridge.

5-5


Hydronic Balancing Products Series 76V – Male x Female Threaded with a Ball Valve Kit

Series 76V MALE X FEMALE THREADED WITH A BALL VALVE KIT

Refer to publication 08.34

SERIES 76V

Aprox. Wgt. Ea. Lbs 1.9 2.8 4.7 6.6 7.2 7.9 8.8

Nominal Size Inches Z\x C\v 1 1* 1Z\v 1Z\x 2

Victaulic Part Code V-004-76V-0_ _ V-006-76V-0_ _ V-010-76V-0_ _ V-010-76V-H_ _ V-012-76V-0_ _ V-014-76V-0_ _ V-020-76V-0_ _

List Price $689.00 701.50 812.50 1140.00 1276.00 1505.50 1660.00

* Prices shown reflect an automatic balancing valve body with either high or low flow cartridge.

Series 76G – Grooved

Series 76G GROOVED

Refer to publication 08.34

SERIES 76G

Aprox. Wgt. Ea. Lbs 17.0 18.0 33.0 52.0

Nominal Size Inches 2Z\x 3 4 6

Victaulic Part Code V-024-76G-_ _ _ * V-030-76G-_ _ _ * V-040-76G-H _ _ * V-060-76G-H _ _ *

List Price $3702.50 3826.50 5923.50 11598.50

* Last two part code numbers are based on cartridge codes found in publication 08.34. Prices shown reflect an automatic balancing valve body with either high or low flow cartridge(s).

Series 76 with Sweat Adapter Refer to publication 08.34

SERIES 76 WITH SWEAT ADAPTER

Nominal Size Inches Z\x C\v 1 1* 1Z\v 1Z\x 2

Valve List Price $402.00 406.00 443.00 800.50 800.50 800.50 865.00

* Prices shown reflect an automatic balancing valve body with either high or low flow cartridge.

Accessories SECTION 5 HYDRONIC BALANCING PRODUCTS

Refer to publication 08.34

5-6

SERIES 76 ACCESSORIES – PT PORTS

Length Inches 4 – Red 4 – Blue

Victaulic Part Code P-000-76T-4XR P-000-76T-4XB

Price Each $101.00 114.00

2” PT Port

VICTAULIC.COM PL2016-GENERAL-C


Hydronic Balancing Products Automatic Balancing Valve Cartridges

Automatic Balancing Valve Cartridges Refer to publication 08.34

min ∆P

gpm

psi

0.11 0.15 0.20 0.24 0.33 0.39 0.46 0.50 0.57 0.68 0.77 0.90 1.06 1.23 1.41 1.54 1.76 2.10 2.40

1.02 1.02 1.02 1.02 1.16 1.31 1.45 1.45 1.60 1.60 1.74 1.74 1.74 1.74 1.89 1.89 1.89 2.03 2.03

2.71 2.95 3.24 3.52 3.83 4.12

2.03 2.03 2.03 2.32 2.76 3.05

4.49 4.76 5.26 5.88 6.53 6.96 7.81 8.07 9.16 9.91 10.21 10.78

3.19 3.19 3.19 3.34 3.34 3.34 3.48 3.48 3.63 3.77 3.92 4.06

Flow

min ∆P

gpm

psi

2.97 3.79 4.49 5.00 5.24 5.60 5.94 6.54 6.90 7.18 7.99 8.81 9.00 9.56 10.00 10.48 11.00 11.62 12.64 14.05 15.00 15.35

1.74 1.74 1.74 1.74 1.74 1.89 1.89 1.89 2.03 2.03 2.03 2.18 2.32 2.32 2.47 2.47 2.61 2.61 2.76 3.05 3.19 3.19

16.00 16.20 18.00 19.00 20.00 21.00 22.00 24.00 26.00 28.00 30.00 32.00 34.00 36.00 38.00 40.00 42.00 44.00 46.00 48.00 50.00

2.90 3.05 3.05 3.05 3.19 3.19 3.34 3.48 3.63 3.77 3.92 4.06 4.35 4.50 4.79 4.93 5.11 5.51 5.80 6.09 6.38

Low Pressure No. High Pressure Max ∆P 43.5 psi No. Figure String Max ∆P 87 psi Position 23 & 34 Position 23 & 34 Victaulic Price Victaulic Price Code Each Code Each Cartridge Type 30 3A $289.50 CA $401.50 3B 289.50 CB 401.50 3C 289.50 CC 401.50 3D 289.50 CD 401.50 3E 289.50 CE 401.50 3F 289.50 CF 401.50 3G 289.50 CG 401.50 3H 289.50 CH 401.50 3I 289.50 CI 401.50 3J 289.50 CJ 401.50 3K 289.50 CK 401.50 3L 289.50 CL 401.50 3M 289.50 CM 401.50 3N 289.50 CN 401.50 3O 289.50 CO 401.50 3P 289.50 CP 401.50 3Q 289.50 CQ 401.50 3R 289.50 CR 401.50 3S 289.50 CS 401.50 3T 289.50 CT 401.50 3U 289.50 CU 401.50 3V 289.50 CV 401.50 Cartridge Type 40 4A $289.50 4B 289.50 4C 289.50 4D 289.50 4E 289.50 4F 289.50 4G 289.50 4H 289.50 4I 289.50 4J 289.50 4K 289.50 4L 289.50 4M 289.50 4N 289.50 4O 289.50 4P 289.50 4Q 289.50 4R 289.50 4S 289.50 4T 289.50 4U 289.50

DA DB DC DD DE DF DG DH DI DJ DK DL DM DN DO DP DQ DR DS DT DU

$401.50 401.50 401.50 401.50 401.50 401.50 401.50 401.50 401.50 401.50 401.50 401.50 401.50 401.50 401.50 401.50 401.50 401.50 401.50 401.50 401.50

TA Series TC – On/Off Control

VICTAULIC.COM PL2016-GENERAL-C

SECTION 5 HYDRONIC BALANCING PRODUCTS

Flow

Low Pressure No. Max ∆P 43.5 psi High Pressure No. Figure String Max ∆P 87 psi Position 23 & 34 Position 23 & 34 Victaulic Price Victaulic Price Code Each Code Each Cartridge Type 10 1A $130.50 – $187.00 1B 130.50 – 187.00 1C 130.50 – 187.00 1D 130.50 AD 187.00 1E 130.50 AE 187.00 1F 130.50 AF 187.00 1G 130.50 AG 187.00 1H 130.50 AH 187.00 1I 130.50 AI 187.00 1J 130.50 AJ 187.00 1K 130.50 AK 187.00 1L 130.50 AL 187.00 1M 130.50 AM 187.00 1N 130.50 AN 187.00 1O 130.50 AO 187.00 1P 130.50 AP 187.00 1Q 130.50 AQ 187.00 1R 130.50 AR 187.00 1S 130.50 AS 187.00 Cartridge Type 11 1T $130.50 AT $187.00 1U 130.50 AU 187.00 1V 130.50 AV 187.00 1W 130.50 AW 187.00 1X 130.50 AX 187.00 1Y 130.50 AY 187.00 Cartridge Type 20 2A $130.50 BA $187.00 2B 130.50 BB 187.00 2C 130.50 BC 187.00 2D 130.50 BD 187.00 2E 130.50 BE 187.00 2F 130.50 BF 187.00 2G 130.50 BG 187.00 2H 130.50 BH 187.00 2I 130.50 BI 187.00 2J 130.50 BJ 187.00 2K 130.50 BK 187.00 2L 130.50 BL 187.00

5-7


Hydronic Balancing Products Balancing Control Valves Series TC – On/Off Control TBV TERMINAL BALANCING AND CONTROL VALVE

Refer to publication 08.38

SERIES TC – ON/OFF CONTROL

Nominal Size Inches Z\x – Low Flow – NP Z\x – Nominal Flow – NP Z\x – Low Flow – NO Z\x – Low Flow – NC Z\x – Nominal Flow – NC Z\x – Nominal Flow – NO C\v – Nominal Flow – NP C\v – Nominal Flow – NC C\v – Nominal Flow – NO 1 – Nominal Flow – NP 1 – Nominal Flow – NC 1 – Nominal Flow – NO

Aprox. Wgt. Ea. Lbs 0.7 0.7 0.7 0.7 0.7 0.7 0.9 0.9 0.9 1.5 1.5 1.5

Victaulic Part Code V-004-0TC-LNP V-004-0TC-NNP V-004-0TC-L00 V-004-0TC-LNC V-004-0TC-NNC V-004-0TC-N00 V-006-0TC-NNP V-006-0TC-NNC V-006-0TC-N00 V-010-0TC-NNP V-010-0TC-NNC V-010-0TC-N00

KOIL-KIT™ Coil Pack Figure String Positions 18 – 23 FAFAF-L FAFAF-0 EAFAF-L GAFAF-L GAFAF-0 EAFAF-0 FBFBF-0 GBFBF-0 EBFBF-0 FCFCF-0 GCFCF-0 ECFCF-0

List Price $691.50 691.50 389.50 691.50 691.50 389.50 854.00 854.00 587.50 1004.00 1004.00 781.00

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. NP – Normally Open Actuator NC – Normally Closed Actuator NO – No Actuator

TA Series TCM – Modulating Control

Series TCM – Modulating Control TBV TERMINAL BALANCING AND CONTROL VALVE

Refer to publication 08.38

SERIES TCM – MODULATING CONTROL

Nominal Size Inches Z\x – Low Flow – NC

Z\x – Nominal Flow – NC

C\v – Nominal Flow – NC

1 – Nominal Flow – NC

Aprox. Wgt. Ea. Lbs 1.6 1.6 1.6 1.6 1.6 1.6 1.9 1.9 1.9 2.6 2.6 2.6

Actuator TM EMO 1 EMO 3 TM EMO 1 EMO 3 TM EMO 1 EMO 3 TM EMO 1 EMO 3

KOIL-KIT™ Coil Pack Figure Victaulic String Part Code Positions 18 – 23 V-004-TCM-LNC IAFAF-L V-004-TCM-LE1 1AFAF-L V-004-TCM-LE3 2AFAF-L V-004-TCM-NNC IAFAF-0 V-004-TCM-NE1 1AFAF-0 V-004-TCM-NE3 2AFAF-0 V-006-TCM-NNC IBFBF-0 V-006-TCM-NE1 1BFBF-0 V-006-TCM-NE3 2BFBF-0 V-010-TCM-NNC ICFCF-0 V-010-TCM-NE1 1CFCF-0 V-010-TCM-NE3 2CFCF-0

List Price $854.00 895.50 1015.50 854.00 895.50 1015.50 1038.50 1064.00 1181.00 1190.50 1253.50 1335.50

SECTION 5 HYDRONIC BALANCING PRODUCTS

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

5-8

NP – Normally Open Actuator NC – Normally Closed Actuator

VICTAULIC.COM PL2016-GENERAL-C


Hydronic Balancing Products Balancing Control Valves TA Series TCP – Pressure Independent

TA Series TCP – Pressure Independent

TA SERIES TCP

TERMINAL BALANCING CONTROL VALVE

Refer to publication 08.39

Nominal Size Inches Z\x – Low Flow

Z\x – Normal Flow

Z\x – High Flow

C\v – Normal Flow

C\v – High Flow

1 – Normal Flow

Aprox. Wgt. Ea. Lbs 2.2 2.2 2.2 2.2 2.2 2.2 3.3 3.3 3.3 2.5 2.5 2.5 3.3 3.3 3.3 3.3 3.3 3.3

Actuator TM EMO 1 EMO 3 TM EMO 1 EMO 3 TM EMO 1 EMO 3 TM EMO 1 EMO 3 TM EMO 1 EMO 3 TM EMO 1 EMO 3

KOIL-KIT™ Coil Victaulic Pack Figure String Part Code Positions 18 – 23 V-004-TCP-LNC KAFAF-L V-004-TCP-LE1 3AFAF-L V-004-TCP-LE3 4AFAF-L V-004-TCP-NNC KAFAF-0 V-004-TCP-NE1 3AFAF-0 V-004-TCP-NE3 4AFAF-0 V-004-TCP-HNC KAFAF-H V-004-TCP-HE1 3AFAF-H V-004-TCP-HE3 4AFAF-H V-006-TCP-NNC KBFBF-0 V-006-TCP-NE1 3BFBF-0 V-006-TCP-NE3 4BFBF-0 V-006-TCP-HNC KBFBF-H V-006-TCP-HE1 3BFBF-H V-006-TCP-HE3 4BFBF-H V-010-TCP-NNC KCFCF-0 V-010-TCP-NE1 3CFCF-0 V-010-TCP-NE3 4CFCF-0

List Price $1645.00 1645.00 1645.00 1645.00 1645.00 1645.00 1645.00 1645.00 1645.00 1729.50 1729.50 1729.50 1729.50 1729.50 1729.50 1890.50 1890.50 1890.50

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

SECTION 5 HYDRONIC BALANCING PRODUCTS

VICTAULIC.COM PL2016-GENERAL-C

5-9


Hydronic Balancing Products TA Series 7CP Compact Pressure Independent Balancing and Control Valve

TA Series 7CP COMPACT PRESSURE INDEPENDENT BALANCING AND CONTROL VALVE

Refer to publication 08.37

TA SERIES 7CP

Nominal Size Inches

Z\x

C\v

Actuator EMO 1 EMO 3 TM T NC T NO EMO 1 EMO 3 TM T NC T NO EMO 1 EMO 3 TM T NC T NO EMO 1 EMO 3 TM T NC T NO EMO 1 EMO 3 TM T NC T NO

End Connection Size Inches Vale Body Inlet Outlet Connection Connection

Z\x – Female

Z\x – Female

Z\x – Male

Z\x – Female

Z\x – Female

C\v – Female

C\v – Female

C\v – Female

C\v – Male

C\v – Female

Koil-Kit™ Coil Pack Figure String Victaulic Positions 18 Part Code – 22 V0047CP1FF 5AFAF V0047CP3FF SAFAF V0047CPMFF PAFAF V0047CPCFF RAFAF V0047CPPFF QAFAF V0047CP1MF 5AMAF V0047CP3MF SAMAF V0047CPMMF PAMAF V0047CPCMF RAMAF V0047CPPMF QAMAF VA597CP1FF 5AFBF VA597CP3FF SAFBF VA597CPMFF PAFBF VA597CPCFF RAFBF VA597CPPFF QAFBF V0067CP1FF 5BFBF V0067CP3FF SBFBF V0067CPMFF PBFBF V0067CPCFF RBFBF V0067CPPFF QBFBF V0067CP1MF 5BMBF V0067CP3MF SBMBF V0067CPMMF PBMBF V0067CPCMF RBMBF V0067CPPMF QBMBF

List Price $1507.50 1507.50 1507.50 1129.00 1129.00 1507.50 1507.50 1507.50 1129.00 1129.00 1659.00 1659.00 1659.00 1283.00 1283.00 1659.00 1659.00 1659.00 1283.00 1283.00 1659.00 1659.00 1659.00 1283.00 1283.00

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. Additional end configurations available. Contact Victaulic for details.

SECTION 5 HYDRONIC BALANCING PRODUCTS

EMO 1 – Modulating Mechanical Actuator EMO 3 – 3 Point Mechanical Actuator TM – Modulating Actuator T NC – Normally Closed Actuator T NO – Normally Open Actuator

5-10

VICTAULIC.COM PL2016-GENERAL-C


Hydronic Balancing Products TA Series 7CP Compact Pressure Independent Balancing and Control Valve

TA Series 7CP COMPACT PRESSURE INDEPENDENT BALANCING AND CONTROL VALVE

Refer to publication 08.37

TA SERIES 7CP

Nominal Size Inches

1

1Z\v

Actuator EMO 1 EMO 3 TM T NC T NO EMO 1 EMO 3 TM T NC T NO EMO 1 EMO 3 TM T NC T NO EMO 1 EMO 3 TM T NC T NO EMO 1 EMO 3 TM T NC T NO

End Connection Size Inches Vale Body Inlet Outlet Connection Connection

C\v – Female

1 – Female

1 – Female

1 – Female

1 – Female 1 – Male

1 – Female

1Z\v – Female

1Z\v – Female

1Z\v – Female

Koil-Kit™ Coil Pack Figure String Victaulic Positions 18 Part Code – 22 VA617CP1FF 5BFCF VA617CP3FF SBFCF VA617CPMFF PBFCF VA617CPCFF RBFCF VA617CPPFF QBFCF V0107CP1FF 5CFCF V0107CP3FF SCFCF V0107CPMFF PCFCF V0107CPCFF RCFCF V0107CPPFF QCFCF V0107CP1MF 5CMCF V0107CP3MF SCMCF V0107CPMMF PCMCF V0107CPCMF RCMCF V0107CPPMF QCMCF VZ907CP1FF 5CFDF VZ907CP3FF SCFDF VZ907CPMFF PCFDF VZ907CPCFF RCFDF VZ907CPPFF QCFDF V0127CP1FF 5DFDF V0127CP3FF SDFDF V0127CPMFF PDFDF V0127CPCFF RDFDF V0127CPPFF QDFDF

List Price $1919.00 1919.00 1919.00 1541.00 1541.00 1919.00 1919.00 1919.00 1541.00 1541.00 1919.00 1919.00 1919.00 1541.00 1541.00 2301.00 2301.00 2301.00 1925.50 1925.50 2301.00 2301.00 2301.00 1925.50 1925.50

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. Additional end configurations available. Contact Victaulic for details. EMO 1 – Modulating Mechanical Actuator EMO 3 – 3 Point Mechanical Actuator TM – Modulating Actuator T NC – Normally Closed Actuator T NO – Normally Open Actuator

SECTION 5 HYDRONIC BALANCING PRODUCTS

VICTAULIC.COM PL2016-GENERAL-C

5-11


Hydronic Balancing Products TA Series 7CP Accessories

TA Series 7CP Accessories

TA SERIES 7CP FEMALE AND SWEAT TAILPIECE ACCESSORIES

Nominal Size Inches Z\x C\v 1 1Z\v Z\x C\v 1 1Z\v Valve Size Inches C\v 1 1Z\v

Connection Size Inches Z\x C\v 1

Assembled Female Victaulic Part Code List Price P0047CPF04 + P0067CPF06 + P0107CPF10 + P0127CPF12 + Female Tailpiece Gasket P0047CPGSK + P0067CPGSK + P0107CPGSK + P0127CPGSK + Female Tailpiece Reducer Victaulic Part Code List Price P0067CPF04 + P0107CPF06 + P0127CPF10 +

Tailpiece Sweat Victaulic Part Code List Price P0047CPS04 + P0067CPS06 + P0107CPS10 + P0127CPS12 + Sweat Tailpiece Gasket P0047CPGSK + P0067CPGSK + P0107CPGSK + P0127CPGSK + Sweat Tailpiece Reducer Victaulic Part Code List Price – – – – – –

TA SERIES 7CP MALE TAILPIECE ACCESSORIES

Nominal Size Inches Z\x C\v 1

Nipple Victaulic Part Code List Price P0047CTNPL + P0067CTNPL + P0107CTNPL +

Gasket Victaulic Part Code List Price P0047CTGSK + P0067CTGSK + P0107CTGSK +

Nut Victaulic Part Code List Price P0047CTNUT + P0067CTNUT + P0107CTNUT +

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability. NOTE: Male tailpieces require all three components for each joint. Female and Sweat tailpieces are one-piece union assemblies with gasket.

SECTION 5 HYDRONIC BALANCING PRODUCTS

TA Series 7CT Control and Balancing Valve

5-12

VICTAULIC.COM PL2016-GENERAL-C


Hydronic Balancing Products TA Series 7CT COMPACT TERMINAL CONTROL AND BALANCING VALVE

Refer to publication 08.36

TA SERIES 7CT CONTROL AND BALANCING VALVE

Nominal Size Inches

Z\x

C\v

1

EMO Actuator T NC T NO T NC T NO T NC T NO T NC T NO T NC T NO T NC T NO T NC T NO T NC T NO T NC T NO T NC T NO T NC T NO

End Connection Size Inches Vale Body Inlet Outlet Connection Connection Z\x – Female

Z\x – Female

Z\x – Male

Z\x – Female

Z\x – Sweat

Z\x – Female

Z\x – Female

C\v – Female

C\v – Female

C\v – Female

C\v – Male

C\v – Female

C\v – Sweat

C\v – Female

C\v – Female

1 – Female

1 – Female

1 – Female

1 – Male

1 – Female

1 – Sweat

1 – Female

Victaulic Part Code V0047CTCFF V0047CTPFF V0047CTCMF V0047CTPMF V0047CTCSF V0047CTPSF VA597CTCFF VA597CTPFF V0067CTCFF V0067CTPFF V0067CTCMF V0067CTPMF V0067CTCSF V0067CTPSF VA617CTCFF VA617CTPFF V0107CTCFF V0107CTPFF V0107CTCMF V0107CTPMF V0107CTCSF V0107CTPSF

KOIL-KIT™ Coil Pack Figure String Positions 18 – 22 7AFAF 6AFAF 7AMAF 6AMAF 7ASAF 6ASAF 7AFBF 6AFBF 7BFBF 6BFBF 7BMBF 6BMBF 7BSBF 6BSBF 7BFCF 6BFCF 7CFCF 6CFCF 7CMCF 6CMCF 7CSCF 6CSCF

List Price $1231.00 1231.00 1170.00 1170.00 1231.00 1231.00 1332.00 1332.00 1332.00 1332.00 1245.00 1245.00 1332.00 1332.00 1469.50 1469.50 1469.50 1469.50 1335.50 1335.50 1469.50 1469.50

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. Additional end configurations available. Contact Victaulic for details. T NC – Normally Closed Actuator T NO – Normally Open Actuator

SECTION 5 HYDRONIC BALANCING PRODUCTS

VICTAULIC.COM PL2016-GENERAL-C

5-13


Hydronic Balancing Products TA Series 7CT Accessories

TA Series 7CT Accessories

TA SERIES 7CT FEMALE AND SWEAT TAILPIECE ACCESSORIES

Nominal Size Inches Z\x C\v 1 1Z\v Z\x C\v 1 1Z\v Valve Size Inches C\v 1 1Z\v

Connection Size Inches Z\x C\v 1

Assembled Female Victaulic Part Code List Price P0047CPF04 + P0067CPF06 + P0107CPF10 + P0127CPF12 + Female Tailpiece Gasket P0047CPGSK $6.00 P0067CPGSK 6.00 P0107CPGSK 9.00 P0127CPGSK + Female Tailpiece Reducer Victaulic Part Code List Price P0067CPF04 + P0107CPF06 + P0127CPF10 +

Tailpiece Sweat Victaulic Part Code List Price P0047CPS04 + P0067CPS06 + P0107CPS10 + P0127CPS12 + Sweat Tailpiece Gasket P0047CPGSK $6.00 P0067CPGSK 6.00 P0107CPGSK 9.00 P0127CPGSK + Sweat Tailpiece Reducer Victaulic Part Code List Price – – – – – –

TA SERIES 7CT MALE TAILPIECE ACCESSORIES

Nominal Size Inches Z\x C\v 1 Nominal Size Inches Z\x C\v 1

Male Assembled Tailpiece Victaulic Part Code List Price P0047CTM04 + P0067CTM06 + P0107CTM10 + Nipple Victaulic Part Code List Price P0047CTNPL + P0067CTNPL + P0107CTNPL +

Gasket Victaulic Part Code List Price P0047CTGSK $6.00 P0067CTGSK 6.00 P0107CTGSK 9.00

Nut Victaulic Part Code List Price P0047CTNUT + P0067CTNUT + P0107CTNUT +

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability.

SECTION 5 HYDRONIC BALANCING PRODUCTS

NOTE: Male tailpieces require all three components for each joint. Female and Sweat tailpieces are one-piece union assemblies with gasket.

5-14

VICTAULIC.COM PL2016-GENERAL-C


Hydronic Balancing Products Series 76X ICSS – Low Lead Balancing Valve

Series 76X ICSS – LOW LEAD BALANCING VALVE

Refer to publication 08.51

SERIES 76X

Flow Victaulic GPM Part Code List Price Z\x” – Low Differential 2 – 32 psid 0.33 F-004-76X-L0A $365.00 0.50 F-004-76X-L0B 365.00 0.67 F-004-76X-L0C 365.00 0.75 F-004-76X-L0D 365.00 0.88 F-004-76X-L0E 365.00 1.00 F-004-76X-L0F 365.00 1.10 F-004-76X-L0G 365.00 1.25 F-004-76X-L0H 365.00 1.50 F-004-76X-L0I 365.00 1.75 F-004-76X-L0J 365.00 2.00 F-004-76X-L0K 365.00 2.25 F-004-76X-L0L 365.00 3.00 F-004-76X-L0M 365.00 Z\x” – High Differential 5 – 60 psid 1.00 F-004-76X-H0F $365.00 1.50 F-004-76X-H0I 365.00 2.00 F-004-76X-H0K 365.00 2.50 F-004-76X-H0Y 365.00 3.00 F-004-76X-H0M 365.00 4.00 F-004-76X-H0O 365.00 5.00 F-004-76X-H0Q 365.00

Flow Victaulic GPM Part Code List Price C\v” – Low Differential 2 – 32 psid 0.33 F-006-76X-L0A $446.00 0.50 F-006-76X-L0B 446.00 0.67 F-006-76X-L0C 446.00 0.75 F-006-76X-L0D 446.00 0.88 F-006-76X-L0E 446.00 1.00 F-006-76X-L0F 446.00 1.10 F-006-76X-L0G 446.00 1.25 F-006-76X-L0H 446.00 1.50 F-006-76X-L0I 446.00 1.75 F-006-76X-L0J 446.00 2.00 F-006-76X-L0K 446.00 2.25 F-006-76X-L0L 446.00 3.00 F-006-76X-L0M 446.00 3.50 F-006-76X-L0N 446.00 4.00 F-006-76X-L0O 446.00 4.50 F-006-76X-L0P 446.00 5.00 F-006-76X-L0Q 446.00 6.00 F-006-76X-L0R 446.00 7.00 F-006-76X-L0S 446.00 8.00 F-006-76X-L0T 446.00 C\v” – High Differential 5 – 60 psid 1.00 F-006-76X-H0F $446.00 1.50 F-006-76X-H0I 446.00 2.00 F-006-76X-H0K 446.00 2.50 F-006-76X-H0Y 446.00 3.00 F-006-76X-H0M 446.00 4.00 F-006-76X-H0O 446.00 5.00 F-006-76X-H0Q 446.00 6.00 F-006-76X-H0R 446.00 7.00 F-006-76X-H0S 446.00 8.00 F-006-76X-H0T 446.00 9.00 F-006-76X-H0U 446.00 10.00 F-006-76X-H0V 446.00 11.00 F-006-76X-H0W 446.00 12.00 F-006-76X-H0X 446.00

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

TA Series 7FC (FUS1ON C)

SECTION 5 HYDRONIC BALANCING PRODUCTS

VICTAULIC.COM PL2016-GENERAL-C

5-15


Hydronic Balancing Products TA Series 7FC (FUS1ON C) BALANCING AND CONTROL VALVE WITH INDEPENDENT EQM CHARACTERISTICS

Refer to publication 08.52

TA SERIES 7FC – STANDARD RECOMMENDED VALVE AND ACTUATOR

Nominal Size Inches

1Z\v

1Z\x

2

2Z\x

SECTION 5 HYDRONIC BALANCING PRODUCTS

3

5-16

4 5 6

Actuator M N P Q R M N P Q R M N P Q R M N P Q R M N P Q R Q R Q R U V

Supply Voltage 24V AC/DC 115V AC 24V AC/DC 24V AC/DC 115V AC 24V AC/DC 115V AC 24V AC/DC 24V AC/DC 115V AC 24V AC/DC 115V AC 24V AC/DC 24V AC/DC 115V AC 24V AC/DC 115V AC 24V AC/DC 24V AC/DC 115V AC 24V AC/DC 115V AC 24V AC/DC 24V AC/DC 115V AC 24V AC/DC 115V AC 24V AC/DC 115V AC 24V AC/DC 115V AC

Input Signal Options * 3 point or on/off 3 point or on/off 0-10V; 4-20mA 0-10V; 4-20mA; 3 point or on/off 0-10V; 4-20mA; 3 point or on/off 3 point or on/off 3 point or on/off 0-10V; 4-20mA 0-10V; 4-20mA; 3 point or on/off 0-10V; 4-20mA; 3 point or on/off 3 point or on/off 3 point or on/off 0-10V; 4-20mA 0-10V; 4-20mA; 3 point or on/off 0-10V; 4-20mA; 3 point or on/off 3 point or on/off 3 point or on/off 0-10V; 4-20mA 0-10V; 4-20mA; 3 point or on/off 0-10V; 4-20mA; 3 point or on/off 3 point or on/off 3 point or on/off 0-10V; 4-20mA 0-10V; 4-20mA; 3 point or on/off 0-10V; 4-20mA; 3 point or on/off 0-10V; 4-20mA; 3 point or on/off 0-10V; 4-20mA; 3 point or on/off 0-10V; 4-20mA; 3 point or on/off 0-10V; 4-20mA; 3 point or on/off 0-10V; 4-20mA; 3 point or on/off 0-10V; 4-20mA; 3 point or on/off

KOIL-KIT™ Coil Pack Figure String Positions 18 – 23 IDFDFM IDFDFN IDFDFP IDFDFQ IDFDFR IEFEFM IEFEFN IEFEFP IEFEFQ IEFEFR IFFFFM IFFFFN IFFFFP IFFFFQ IFFFFR – – – – – – – – – – – – – – – –

Victaulic Part Code V0127FC00M V0127FC00N V0127FC00P V0127FC00Q V0127FC00R V0147FC00M V0147FC00N V0147FC00P V0147FC00Q V0147FC00R V0207FC00M V0207FC00N V0207FC00P V0207FC00Q V0207FC00R V0247FC00M V0247FC00N V0247FC00P V0247FC00Q V0247FC00R V0307FC00M V0307FC00N V0307FC00P V0307FC00Q V0307FC00R V0407FC00Q V0407FC00R V0507FC00Q V0507FC00R V0607FC00U V0607FC00V

Price Each $5391.50 5895.50 5391.50 7538.50 8035.50 6132.50 6636.50 6132.50 8279.00 8776.00 8584.50 9088.50 8584.50 10731.00 11228.00 11503.50 12007.00 11503.50 13673.50 14176.00 12059.00 12562.00 12059.00 14229.00 14732.00 17303.50 17806.50 22146.00 22648.50 28093.00 28595.50

* Choice of Input Signals done by adjusting jumpers when installing. NOTE: For an actuator code description, reference the Actuator Only chart on the next page.

VICTAULIC.COM PL2016-GENERAL-C


Hydronic Balancing Products TA SERIES 7FC – VALVE AND FAIL SAFE FUNCTION ACTUATOR

Nominal Size Inches 1Z\v 1Z\x 2 2Z\x 3 4 5

Actuator S T S T S T S T S T S T S T

Supply Voltage 24V AC/DC 115V AC 24V AC/DC 115V AC 24V AC/DC 115V AC 24V AC/DC 115V AC 24V AC/DC 115V AC 24V AC/DC 115V AC 24V AC/DC 115V AC

Input Signal Options 0-10V; 4-20mA; 3 point or on/off 0-10V; 4-20mA; 3 point or on/off 0-10V; 4-20mA; 3 point or on/off 0-10V; 4-20mA; 3 point or on/off 0-10V; 4-20mA; 3 point or on/off 0-10V; 4-20mA; 3 point or on/off 0-10V; 4-20mA; 3 point or on/off 0-10V; 4-20mA; 3 point or on/off 0-10V; 4-20mA; 3 point or on/off 0-10V; 4-20mA; 3 point or on/off 0-10V; 4-20mA; 3 point or on/off 0-10V; 4-20mA; 3 point or on/off 0-10V; 4-20mA; 3 point or on/off 0-10V; 4-20mA; 3 point or on/off

KOIL-KIT™ Coil Pack Figure String Positions 18 – 23 IDFDFS IDFDFT IEFEFS IEFEFT IFFFFS IFFFFT – – – – – – – –

Victaulic Part Code V0127FC00S V0127FC00T V0147FC00S V0147FC00T V0207FC00S V0207FC00T V0247FC00S V0247FC00T V0307FC00S V0307FC00T V0407FC00S V0407FC00T V0507FC00S V0507FC00T

Price Each $8329.50 8329.50 9070.50 9070.50 11522.50 11522.50 14470.50 14470.50 15024.00 15024.00 18098.50 18098.50 22941.00 22941.00

* “S” Actuator is an FSE Fail Close Valve (No Flow); “T” Actuator is an FSR Fail Open Valve (Full Flow). TA SERIES 7FC – VALVE ONLY

Nominal Size Inches 1Z\v 1Z\x 2 2Z\x 3 4 5 6

Victaulic Part Code V0127FC000 V0147FC000 V0207FC000 V0247FC000 V0307FC000 V0407FC000 V0507FC000 V0607FC000

KOIL-KIT™ Coil Pack Figure String Positions 18 – 23 IDFDF0 IEFEF0 IFFFF0 – – – – –

Price Each $3775.50 4542.50 7081.50 9664.00 10230.50 13382.50 18340.00 23509.00

TA SERIES 7FC – ACTUATOR ONLY

Actuator *

IMI TA Actuator Nomenclature

Supply Voltage

M

TA-MC55/24

24V AC/DC

N

TA-MC55/115

115V AC

P

TA-MC55/Y

24V AC/DC

Q

TA-MC100/24

24V AC/DC

R

TA-MC100/115

115V AC

S

TA-MC100FSE/24

24V AC/DC

T

TA-MC100FSR/24

24V AC/DC

U V

TA-MC160/24 TA-MC160/115

24V AC/DC 115V AC

Input Signal Options 3 point or on/off Inpt: 3 point or on/off with Adapter 3 point or on/off 3 point or on/off with Adapter 0-10V; 4-20mA 0-10V; 4-20mA with Adapter 0-10V; 4-20mA; 3 point or on/off 0-10V; 4-20mA; 3 point or on/off with Adapter 0-10V; 4-20mA; 3 point or on/off 0-10V; 4-20mA; 3 point or on/off with Adapter 0-10V; 4-20mA; 3 point or on/off 0-10V; 4-20mA; 3 point or on/off with Adapter 0-10V; 4-20mA; 3 point or on/off 0-10V; 4-20mA; 3 point or on/off with Adapter 0-10V; 4-20mA; 3 point or on/off with Adapter 0-10V; 4-20mA; 3 point or on/off with Adapter

Victaulic Part Code P0127FC00M P0247FC00M P0127FC00N P0247FC00N P0127FC00P P0247FC00P P0127FC00Q P0247FC00Q P0127FC00R P0247FC00R P0127FC00S P0247FC00S P0127FC00T P0247FC00T P0607FC00U P0607FC00V

Price Each $1843.50 + 2375.50 + 1843.50 + 4108.50 + 4633.50 + 4943.50 + 4943.50 + + +

* “S” Actuator is an FSE Fail Close Valve (No Flow); “T” Actuator is an FSR Fail Open Valve (Full Flow). NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

VICTAULIC.COM PL2016-GENERAL-C

SECTION 5 HYDRONIC BALANCING PRODUCTS

Nominal Size Inches 1Z\v – 2 2Z\x – 3 1Z\v – 2 2Z\x – 3 1Z\v – 2 2Z\x – 3 1Z\v – 2 2Z\x – 5 1Z\v – 2 2Z\x – 5 1Z\v – 2 2Z\x – 5 1Z\v – 2 2Z\x – 5 6 6

5-17


Hydronic Balancing Products Combined Balancing and Control Valves TA Series 7FP (FUS1ON P)

TA Series 7FP (FUS1ON P) PRESSURE INDEPENDENT COMBINED BALANCING AND CONTROL VALVE WITH INDEPENDENT EQM CHARACTERISTICS

Refer to publication 08.53

TA SERIES 7FP – STANDARD RECOMMENDED VALVE AND ACTUATOR

Nominal Size Inches

1Z\v

1Z\x

2

2Z\x

SECTION 5 HYDRONIC BALANCING PRODUCTS

3

5-18

4 5 6

Actuator M N P Q R M N P Q R M N P Q R M N P Q R M N P Q R Q R Q R U V

Supply Voltage 24V AC/DC 115V AC 24V AC/DC 24V AC/DC 115V AC 24V AC/DC 115V AC 24V AC/DC 24V AC/DC 115V AC 24V AC/DC 115V AC 24V AC/DC 24V AC/DC 115V AC 24V AC/DC 115V AC 24V AC/DC 24V AC/DC 115V AC 24V AC/DC 115V AC 24V AC/DC 24V AC/DC 115V AC 24V AC/DC 115V AC 24V AC/DC 115V AC 24V AC/DC 115V AC

Input Signal Options * 3 point or on/off 3 point or on/off 0-10V; 4-20mA 0-10V; 4-20mA; 3 point or on/off 0-10V; 4-20mA; 3 point or on/off 3 point or on/off 3 point or on/off 0-10V; 4-20mA 0-10V; 4-20mA; 3 point or on/off 0-10V; 4-20mA; 3 point or on/off 3 point or on/off 3 point or on/off 0-10V; 4-20mA 0-10V; 4-20mA; 3 point or on/off 0-10V; 4-20mA; 3 point or on/off 3 point or on/off 3 point or on/off 0-10V; 4-20mA 0-10V; 4-20mA; 3 point or on/off 0-10V; 4-20mA; 3 point or on/off 3 point or on/off 3 point or on/off 0-10V; 4-20mA 0-10V; 4-20mA; 3 point or on/off 0-10V; 4-20mA; 3 point or on/off 0-10V; 4-20mA; 3 point or on/off 0-10V; 4-20mA; 3 point or on/off 0-10V; 4-20mA; 3 point or on/off 0-10V; 4-20mA; 3 point or on/off 0-10V; 4-20mA; 3 point or on/off 0-10V; 4-20mA; 3 point or on/off

KOIL-KIT™ Coil Pack Figure String Positions 18 – 23 KDFDFM KDFDFN KDFDFP KDFDFQ KDFDFR KEFEFM KEFEFN KEFEFP KEFEFQ KEFEFR KFFFFM KFFFFN KFFFFP KFFFFQ KFFFFR – – – – – – – – – – – – – – – –

Victaulic Part Code V0127FP00M V0127FP00N V0127FP00P V0127FP00Q V0127FP00R V0147FP00M V0147FP00N V0147FP00P V0147FP00Q V0147FP00R V0207FP00M V0207FP00N V0207FP00P V0207FP00Q V0207FP00R V0247FP00M V0247FP00N V0247FP00P V0247FP00Q V0247FP00R V0307FP00M V0307FP00N V0307FP00P V0307FP00Q V0307FP00R V0407FP00Q V0407FP00R V0507FP00Q V0507FP00R V0607FP00U V0607FP00V

Price Each $6269.00 6801.50 6269.50 8534.50 9059.00 6469.50 7001.50 6469.50 8734.50 9259.50 11521.50 12053.50 11521.50 13786.50 14311.00 19940.50 20465.00 19940.50 22205.00 22730.50 21582.50 22108.00 21582.50 23848.00 24372.50 30869.50 31394.00 47118.50 47643.50 55342.50 55868.00

* Choice of Input Signals done by adjusting jumpers when installing. NOTE: For an actuator code description, reference the Actuator Only chart on the next page. NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

VICTAULIC.COM PL2016-GENERAL-C


Hydronic Balancing Products TA SERIES 7FP/7FC – VALVE AND FAIL SAFE FUNCTION ACTUATOR

Nominal Size Inches 1Z\v 1Z\x 2 2Z\x 3 4 5

Actuator * S T S T S T S T S T S T S T

Supply Voltage 24V AC/DC 115V AC 24V AC/DC 115V AC 24V AC/DC 115V AC 24V AC/DC 115V AC 24V AC/DC 115V AC 24V AC/DC 115V AC 24V AC/DC 115V AC

Input Signal Options 0-10V; 4-20mA; 3 point or on/off 0-10V; 4-20mA; 3 point or on/off 0-10V; 4-20mA; 3 point or on/off 0-10V; 4-20mA; 3 point or on/off 0-10V; 4-20mA; 3 point or on/off 0-10V; 4-20mA; 3 point or on/off 0-10V; 4-20mA; 3 point or on/off 0-10V; 4-20mA; 3 point or on/off 0-10V; 4-20mA; 3 point or on/off 0-10V; 4-20mA; 3 point or on/off 0-10V; 4-20mA; 3 point or on/off 0-10V; 4-20mA; 3 point or on/off 0-10V; 4-20mA; 3 point or on/off 0-10V; 4-20mA; 3 point or on/off

KOIL-KIT™ Coil Pack Figure String Positions 18 – 23 KDFDFS KDFDFT KEFEFS KEFEFT KFFFFS KFFFFT – – – – – – – –

Victaulic Part Code V0127FP00S V0127FP00T V0147FP00S V0147FP00T V0207FP00S V0207FP00T V0247FP00S V0247FP00T V0307FP00S V0307FP00T V0407FP00S V0407FP00T V0507FP00S V0507FP00T

Price Each $9369.50 9369.50 9569.50 9569.50 14621.50 14621.50 23034.50 23034.50 24677.00 24677.00 31699.00 31699.00 47948.00 47948.00

* “S” Actuator is an FSE Fail Close Valve (No Flow); “T” Actuator is an FSR Fail Open Valve (Full Flow). NOTE: Items listed in shaded areas are non-cancellable and non-returnable. TA SERIES 7FP – VALVE ONLY

Nominal Size Inches 1Z\v 1Z\x 2 2Z\x 3 4 5 6

Victaulic Part Code V0127FP000 V0147FP000 V0207FP000 V0247FP000 V0307FP000 V0407FP000 V0507FP000 V0607FP000

Price Each $4426.00 4626.00 9678.00 17780.00 19423.00 26444.50 42693.50 49979.00

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. TA SERIES 7FP – ACTUATOR ONLY

Actuator *

IMI TA Actuator Nomenclature

Supply Voltage

M

TA-MC55/24

24V AC/DC

N

TA-MC55/115

115V AC

P

TA-MC55/Y

24V AC/DC

Q

TA-MC100/24

24V AC/DC

R

TA-MC100/115

115V AC

S

TA-MC100FSE/24

24V AC/DC

T

TA-MC100FSR/24

24V AC/DC

U V

TA-MC160/24 TA-MC160/115

24V AC/DC 115V AC

Input Signal Options 3 point or on/off Inpt: 3 point or on/off with Adapter 3 point or on/off 3 point or on/off with Adapter 0-10V; 4-20mA 0-10V; 4-20mA with Adapter 0-10V; 4-20mA; 3 point or on/off 0-10V; 4-20mA; 3 point or on/off with Adapter 0-10V; 4-20mA; 3 point or on/off 0-10V; 4-20mA; 3 point or on/off with Adapter 0-10V; 4-20mA; 3 point or on/off 0-10V; 4-20mA; 3 point or on/off with Adapter 0-10V; 4-20mA; 3 point or on/off 0-10V; 4-20mA; 3 point or on/off with Adapter 0-10V; 4-20mA; 3 point or on/off with Adapter 0-10V; 4-20mA; 3 point or on/off with Adapter

Victaulic Part Code P0127FC00M P0247FC00M P0127FC00N P0247FC00N P0127FC00P P0247FC00P P0127FC00Q P0247FC00Q P0127FC00R P0247FC00R P0127FC00S P0247FC00S P0127FC00T P0247FC00T P0607FC00U P0607FC00V

Price Each $1843.50 + 2375.50 + 1843.50 + 4108.50 + 4633.50 + 4943.50 + 4943.50 + + +

* “S” Actuator is an FSE Fail Close Valve (No Flow); “T” Actuator is an FSR Fail Open Valve (Full Flow).

SECTION 5 HYDRONIC BALANCING PRODUCTS

Nominal Size Inches 1Z\v – 2 2Z\x – 3 1Z\v – 2 2Z\x – 3 1Z\v – 2 2Z\x – 3 1Z\v – 2 2Z\x – 5 1Z\v – 2 2Z\x – 5 1Z\v – 2 2Z\x – 5 1Z\v – 2 2Z\x – 5 6 6

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

VICTAULIC.COM PL2016-GENERAL-C

5-19


Hydronic Balancing Products KOIL-KIT™ Coil Packages

Series 799/79V KOIL-KIT™ Coil Pack

Series 799/79V KOIL-KIT™ Coil Pack The Victaulic KOIL-KIT™ Coil Pack is a custom packaged kit that can include Series 78Y Y-Strainer/Ball Valve or Series 78T Ball Valve Union Combination, two Coil Hoses, a Series 78U Union Port Fitting, and a balancing valve Series 78K, 787 or 786. There are two kits available: Series 799 KOIL-KIT™ Coil Pack or Series 79V KOIL-KIT™ Coil Pack assembled with your ATC Valve (not manufactured by Victaulic). Please contact your local Victaulic representative to discuss options and ordering to project specifications. ATC TA Series 786/787

Series 78K

RETURN

OR Coil Hose (2)

Series 78U

COIL

OR Coil Hose (1)

SUPPLY

Series 78Y

Series 78T

Below is a list of available components and end connection options to choose from. For any additional requirements please call your local Victaulic Sales representative.

Series 78T Inlet

½

or

Outlet

½

¾

¾

1

1

❏ 1¼

❏ 1¼

❏ 1½

❏ 1½

2

2

❑ Coil Hose (1)

Series 78Y

swt x swt union swt x fem union swt x male union fem x swt union fem x fem union fem x male union Plynx x swt union Plynx x fem union Plynx x male union Plynx x Plynx

Double reduction available

SECTION 5 HYDRONIC BALANCING PRODUCTS

Length

End Config.

❏ ❏ ❏ ❏ ❏ ❏ ❏ ❏ ❏ ❏

Select port fitting size and end config.

Select coil hose option.

Select one drain valve option from below. ❑

Series 78U Inlet

End Config.

Outlet

12"

male x fem swivel

½

½

24"

male x male swivel

¾

¾

36"

male x fem w/adapt.

1

1

Coil Hose (2)

Length

End Config.

12"

male x fem swivel

24"

male x male swivel

36"

male x fem w/adapt.

❏ 1¼

❏ 1¼

❏ 1½

❏ 1½

2

2

End Config.

❏ ❏ ❏ ❏ ❏ ❏ ❏ ❏ ❏

swt x swt union swt x fem union swt x male union fem x swt union fem x fem union fem x male union Plynx x swt union Plynx x fem union Plynx x male union

Triple reduction available

Connect hoses

Select one balancing valve option from below. ❑

Series 78K

Inlet

Outlet

End Config.

TA Series 786

Inlet x Outlet

End Config.

TA Series 787 Inlet x Outlet

½

½

male union x swt

½

½

¾

¾

male union x fem

¾

¾

1

1

male union x Plynx ❏

1

1

swt x swt

❏ 1¼

❏ 1¼

fem union x swt

❏ 1¼

❏ 1¼

❏ 1½

❏ 1½

fem union x fem

❏ 1½

❏ 1½

fem union x Plynx

2

2

2

End Config.

fem x fem

2

Triple reduction inlet available

5-20

VICTAULIC.COM PL2016-GENERAL-C


Hydronic Balancing Products Series 793 Differential Pressure Controller – Threaded

Differential Pressure Controllers TA Series 793

TA SERIES 793 DIFFERENTIAL PRESSURE CONTROLLER

Aprox. Wgt. Ea.

Size

STAP DIFFERENTIAL PRESSURE CONTROLLER THREADED END

Nominal Size Inches Z\x C\v

Refer to publication 08.29

1 1Z\v 1Z\x 2

Actual Outside Diameter Inches 0.840 1.050 1.315 1.660 1.900 2.375

Lbs. 2.4 2.6 2.9 5.7 6.4 7.7

Series 793 (Threaded) Differential Pressure Range psi 1.45 – 8.70 1.45 – 8.70 1.45 – 8.70 2.90 – 11.6 2.90 – 11.6 2.90 – 11.6

Victaulic Part Number IMI TA Code V-004-793-CBV 52 266-015 V-006-793-CBV 52 266-020 V-010-793-CBV 52 266-025 V-012-793-CBV 52 266-032 V-014-793-CBV 52 266-040 V-020-793-CBV 52 266-050

Price Each $979.00 991.50 1007.00 1306.00 1508.50 1795.00

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

TA Series 794 Differential Pressure Controller – Flanged

TA Series 794

TA SERIES 794 DIFFERENTIAL PRESSURE CONTROLLER – (2.9 – 11.6 PSI) DIFFERENTIAL PRESSURE RANGE

STAP DIFFERENTIAL PRESSURE CONTROLLER – FLANGED END (CLASS 150, ASME/ANSI B16.42)

Refer to publication 08.29

Aprox. Wgt. Ea.

Size Nominal Size Inches 2Z\x 3 4

Actual Outside Diameter Inches 2.875 3.500 4.500

Lbs. 46.3 52.9 72.8

Series 794 (Flanged) Differential Pressure Range psi 2.9 – 11.6 2.9 – 11.6 2.9 – 11.6

Victaulic Part Number V-024-794-116 V-030-794-116 V-040-794-116

IMI TA Code 52 266-065 52 266-080 52 266-090

Price Each $6862.50 7343.00 8957.00

TA SERIES 794 DIFFERENTIAL PRESSURE CONTROLLER – (5.8 – 23.2) PSI DIFFERENTIAL PRESSURE RANGE

Aprox. Wgt. Ea.

Size Nominal Size Inches 2Z\x 3 4

Actual Outside Diameter Inches 2.875 3.500 4.500

Lbs. 46.3 52.9 72.8

Series 794 (Flanged) Differential Pressure Range psi 5.8 – 23.2 5.8 – 23.2 5.8 – 23.2

Victaulic Part Number V-024-794-223 V-030-794-223 V-040-794-223

IMI TA Code 52-266-165 52-266-180 52-266-190

Price Each $6862.50 7343.00 8957.00

TA Series 793 Insulation Kits

TA Series 793 INSULATION KITS

Refer to publication 08.29

TA SERIES 793 – INSULATION KITS

Size Nominal Size Inches Z\x – 1 1Z\v – 2

Series 793 Insulation Kit Victaulic Part Number P-006-793-INS P-012-793-INS

IMI TA Code 52 265-225 52 265-250

Price Each $248.00 292.50

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

VICTAULIC.COM PL2016-GENERAL-C

SECTION 5 HYDRONIC BALANCING PRODUCTS

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

5-21


Hydronic Balancing Products TA Differential Pressure Controller Accessories

Accessories

TA DIFFERENTIAL PRESSURE CONTROLLER ACCESSORIES

Refer to publication 08.29

Nominal Size Inches – –

Capillary Tube

Capillary Extension Kit

3 5 Z\x – 1 1Z\v – 2

Victaulic Description Part Code Capillary Pipe and Extension Kit Capillary Tube P-000-793-001 Capillary Extension Kit K-002-793-001 Setting Tool TA Series 793 P-004-793-KEY TA Series 794 P-030-794-KEY Handwheels TA Series 793 P-004-793-HDW TA Series 794 P-012-793-HDW

IMI TA Code

List Price

– –

$159.00 1937.00

52-265-305 52-265-304

$1158.00 1158.00

– –

$311.50 311.50

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

Setting Tool

TA Series 794 Plastic 1Z\v – 2”

SECTION 5 HYDRONIC BALANCING PRODUCTS

TA Series 793 Plastic Z\x – 1”

5-22

VICTAULIC.COM PL2016-GENERAL-C


Hydronic Balancing Products Series 736 TA Link Differential Pressure Sensor

Balancing Instruments Series 736

SERIES 736 – TA LINK DIFFERENTIAL PRESSURE SENSOR

Range kPa 0 – 40 0 – 100

TA LINK DIFFERENTIAL PRESSURE SENSOR

0 – 10 V Output Refer to publication 08.16

Victaulic Part Code V-000-736-000 V-000-736-001

IMI TA Code 52-010-004 52-010-010

List Price $7431.00 7431.00

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

Universal Gauge Meter Conversion Kit

Universal Gauge Meter Conversion Kit

UNIVERSAL GAUGE METER CONVERSION KIT †

Victaulic Part Code K-000-738-100

IMI TA Code –

List Price $1033.50

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. † The kit includes 2 probes, necessary fittings, flow wheel and instruction sheet.

TA Series 73M CMI

SECTION 5 HYDRONIC BALANCING PRODUCTS

VICTAULIC.COM PL2016-GENERAL-C

5-23


Hydronic Balancing Products TA Series 734 SCOPE Premium/Scope Balancing Instrument

TA Series 734 SCOPE PREMIUM/SCOPE BALANCING INSTRUMENT

Refer to publication 08.16

TA SERIES 734 SCOPE PREMIUM/SCOPE BALANCING INSTRUMENT

Description TA Series 734 SCOPE Premium TA Series 734 SCOPE

Victaulic Part Code V-000-734-000 V-000-734-002

IMI TA Code 52-199-014 52-199-214

List Price $46008.00 32204.00

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

TA Series 734 SCOPE

SECTION 5 HYDRONIC BALANCING PRODUCTS

TA Series 734 SCOPE Premium

5-24

VICTAULIC.COM PL2016-GENERAL-C


SECTION 6 – Plain End Couplings and Fittings

Plain End Couplings and Fittings

VICTAULIC.COM PL2016-GENERAL-C

6-1


Products for Plain End IPS Steel Pipe Style 99 Roust-A-Bout Coupling

SECTION 6 PRODUCTS FOR PLAIN END STEEL PIPE

Products for Plain End Steel Pipe Roust-A-Bout Coupling

STYLE 99 – GRADE “E” OR “T” GASKET

PIPE Inches

STYLE 99

Refer to publication 14.02

Nominal Size 1 1Z\x 2 2Z\x 3 3Z\x 4 5 6 8 10 12 14 16 18

Aprx. Wgt. Ea. Outside Diameter 1.315 1.900 2.375 2.875 3.500 4.000 4.500 5.563 6.625 8.625 10.750 12.750 14.000 16.000 18.000

Lbs. 1.7 3.6 5.3 5.7 8.7 10.6 12.8 17.3 23.2 37.2 48.2 60.0 89.0 105.0 122.4

COUPLING COMPLETE † With Grade “E” or “T” Gasket Price Each Painted Galv. $225.50 $275.00 225.50 297.00 266.00 357.50 295.50 399.50 402.50 549.50 488.50 668.50 543.50 756.50 712.50 990.50 899.00 1264.50 1427.50 1987.00 1790.00 2538.50 2284.50 3225.00 3792.50 4130.00 5554.00 6744.50 8325.50 9712.00

Plated Bolt & Nut Size Inches 2 C\, x Z\x x 2Z\x B\, x 3Z\v B\, x 3Z\v C\v x 4Z\v C\v x 4Z\v C\v x 4Z\v 5 M\, x 1 x 6 5 M\, x 5 M\, x 1 x 6Z\x 1 x 6Z\x 1 x 6Z\x 1 x 6Z\x

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. † Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.

Gaskets for Style 99 Couplings

Gaskets for Style 99 Couplings

Nominal Size Inches 1* 1Z\x * 2 2Z\x 3 3Z\x 4 5 6 8 10 12 14 16 18

Standard Gaskets Standard Grade “E” or “T” $48.00 58.50 49.00 58.50 65.00 74.50 85.00 130.00 117.50 171.00 220.00 306.50 459.50 495.00 495.00

Grade “L” Silicone $290.50 344.00 346.00 408.50 591.50 + 1120.00 1153.50 1338.50 1372.00 1502.50 1847.50 – – –

Special Gaskets Grade “A” White Nitrile $129.00 295.00 + + + + + + + + + + – – –

Grade “O” Fluoroelastomer – $360.50 659.00 1130.00 877.50 + 1254.50 1904.50 2581.50 3861.00 + 4857.00 – – –

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. * Style 77 gasket.

6-2

VICTAULIC.COM PL2016-GENERAL-C


Products for Plain End IPS Steel Pipe Plated Trackhead Bolts and Nuts

PLATED TRACKHEAD BOLTS AND NUTS

Bolt and Nut Size Inches 2 C\, x Z\x x 2Z\x

B\,

x

C\v

x

M\,

x

Bolt and Nut Size Inches 1 x 3Z\x 5 5Z\x 6 6Z\x 4 1Z\, x 5Z\x 1Z\v x 3Z\x 5Z\x 1C\, x 5C\v 1Z\x x 4Z\x 5C\v 6 1C\v x 6 1M\, x

Price Each $15.00 18.00 18.50 20.00 20.00 18.50 25.00 25.00 28.50 32.00 36.50 54.50 756.50 48.00 51.00 79.00

2C\v 3 3Z\v 2C\v 3Z\v 3Z\x 4 4Z\v 4Z\v 5 5C\v 5 5Z\x 6Z\x

Price Each $58.50 102.00 87.00 75.00 71.50 164.00 164.00 178.00 194.00 230.00 321.00 243.00 569.00 778.00

SECTION 6 PRODUCTS FOR PLAIN END STEEL PIPE

Plated Trackhead Bolts and Nuts

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability.

No(s). 40-P, 42-P and 43-P Adapter Nipples

Adapter Nipples

ADAPTER NIPPLES – PLAIN TO THREADED, PLAIN TO BEVELED, OR PLAIN TO GROOVED

PIPE Inches No. 40-P

No. 42-P

No. 43-P

Size 1 1Z\x 2 2Z\x 3 4 6*

End to End 3 4 4 4 4 6 6

No. 40-P Plain to Threaded Steel No. 42-P Plain to Beveled Steel No. 43-P Plain to Grooved Steel Aprx. Price Each Wgt. Each Lbs Black Galvanized 0.9 $22.00 + 0.9 45.50 + 1.2 43.00 + 1.9 64.00 + 2.5 74.00 + 5.4 125.00 $323.50 9.5 451.00 +

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability.

VICTAULIC.COM PL2016-GENERAL-C

6-3


Products for Plain End IPS Steel Pipe Plain End Fittings – No. 10-P – 90° Elbow, No. 11-P – 45° Elbow

SECTION 6 PRODUCTS FOR PLAIN END STEEL PIPE

Plain End Fittings Refer to publication 14.04

No. 10-P

No. 11-P

PLAIN END FITTINGS – 90° ELBOW OR 45° ELBOW

Nominal Size Inches 1 1Z\x 2 2Z\x 3 3Z\x 4 5 6 8 10 12

Aprx. Weight Each Lbs 0.6 1.4 (sw) 2.9 (sw) 3.9 (sw) 6.2 (sw) 7.0 (sw) 9.9 (sw) 20.4 20.4 42.0 (sw) 50.0 (sw) 156.0 (sw)

90° Elbow No. 10-P Price Each Painted $244.50 244.50 244.50 244.50 323.00 + 432.50 1341.00 1076.00 1766.50 + +

Aprx. Weight Each Lbs 0.6 1.0 (sw) 1.4 (sw) 2.3 (sw) 4.3 (sw) 5.5 (sw) 7.0 (sw) 18.0 (sw) 11.9 28.5 (sw) 41.0 (sw) 57.8 (sw)

Galv. $271.00 271.00 271.00 303.50 408.00 + 524.50 1463.00 + + + +

45° Elbow No. 11-P Price Each Painted + $203.00 203.00 203.00 295.50 + 419.50 + 993.50 + + +

Galv. + $220.00 220.00 246.00 372.50 + 538.00 + 1238.00 + + +

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability. (sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.

No. 20-P – Tee, No. 61-P Bull Plug

PLAIN END FITTINGS – TEE OR BULL PLUG

Nominal Size No. 20-P

No. 61-P

Inches 1 1Z\x 2 2Z\x 3 3Z\x 4 5 6 8 10 12

Aprx. Weight Each Lbs 1.0 (sw) 1.7 (sw) 3.0 (sw) 6.8 (sw) 9.0 (sw) 12.5 (sw) 11.9 17.1 (sw) 29.5 71.5 (sw) 116.0 (sw) 120.0 (sw)

Tee No. 20-P Price Each Painted + $320.00 320.00 320.00 349.00 + 490.50 826.50 1115.00 2269.00 + +

Galv. + $357.00 357.00 357.00 418.50 + 591.50 + 1367.50 + + +

Bull Plug No. 61-P Aprx. Price Each Weight Each Lbs Electroplated 0.7 + 1.2 $836.00 2.0 + 3.0 + 4.5 1401.00 6.0 + 7.5 + 11.5 + 17.0 8786.00 29.0 + 48.0 + 60.0 +

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability. * Galvanized quoted on application. (sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.

6-4

VICTAULIC.COM PL2016-GENERAL-C


Products for Plain End IPS Steel Pipe No. 33-P – Wye, No. 30-P – Lateral

Plain End Fittings

No. 33-P

No. 30-P

Nominal Size Inches 1 1Z\x 2 2Z\x 3 3Z\x 4 5 6 8 10 12

Aprx. Weight Each Lbs 1.1 1.8 2.9 9.0 8.5 10.0 14.0 21.6 31.2 36.0 52.0 81.2

Wye No. 33-P Price Each Painted + + + + + + + + + + + +

Galv. + + + + + + + + + + + +

Aprx. Weight Each Lbs 3.5 3.5 5.1 9.3 12.8 20.0 19.0 30.0 43.3 92.0 106.0 167.0

Lateral No. 30-P Price Each Painted + + $513.50 + 752.50 + 1053.00 + 1676.00 + 2960.00 +

Galv. + $513.50 + + + + 1386.50 + 2377.00 + + +

SECTION 6 PRODUCTS FOR PLAIN END STEEL PIPE

Refer to publication 14.04

PLAIN END FITTINGS – WYE OR LATERAL

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application, other sizes available. Reducing Tees, True Ys, Crosses and Laterals are segmentally welded steel.

No. 35-P – Cross

PLAIN END FITTINGS – CROSS

Nominal Size

No. 35-P

Inches 1 1Z\x 2 2Z\x 3 3Z\x 4 5 6 8 10 12

Cross No. 35-P Aprx. Weight Each Lbs 1.7 3.5 5.2 5.4 8.5 9.0 10.8 20.0 30.0 66.4 103.0 158.0

Price Each Painted + + + + + + + + + + + +

Galv. + + + + + + + + + + + +

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application, other sizes available. Reducing Tees, True Ys, Crosses and Laterals are segmentally welded steel.

VICTAULIC.COM PL2016-GENERAL-C

6-5


Products for Plain End IPS Steel Pipe No. 53-P – Swaged Nipples

SECTION 6 PRODUCTS FOR PLAIN END STEEL PIPE

Swaged Nipples NO. 53-P

Refer to publication 14.04

NO. 53-P – SWAGED NIPPLES *

Nominal Size Inches 1Z\x x 1 2 x 1 1Z\x 2Z\x x 1 1Z\x 2 3 x 1 1Z\x 2 2Z\x 3Z\x x 3 4 x 1 1Z\x 2 2Z\x 3 3Z\x 5 x 2 3 4

Aprx. Wgt. Each Lbs 1.2 2.0 2.0 3.0 3.0 3.0 4.5 4.5 4.5 4.5 6.8 7.5 7.5 7.5 7.5 7.5 7.5 11.5 11.5 11.5

Price Each Electroplated + + + + + + + + + + + + + + + + + + + +

Nominal Size Inches 6 x 1 1Z\x 2 2Z\x 3 3Z\x 4 5 8 x 3 4 5 6 10 x 3 4 6 8 12 x 6 8 10

Aprx. Wgt. Each Lbs 17.0 16.0 16.0 17.0 17.0 17.0 17.0 17.5 29.0 29.0 29.0 29.0 1.2 2.0 2.0 3.0 3.0 3.0 4.5

Price Each Electroplated + + + + + + + + + + + + + + + + + + +

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application, other sizes available. All weights are approximate and subject to change.

No. 25-P – Reducing Tee

6-6

VICTAULIC.COM PL2016-GENERAL-C


Products for Plain End IPS Steel Pipe Reducing Tees Refer to publication 14.04

Reducing Tee No. 25-P

Nominal Size Inches Run x Branch 1Z\x x 1Z\x x 1 2 x 2 x 1 1Z\x 3 x 3 x 1 1Z\x 2 4 x 4 x 1 1Z\x 2 2Z\x 3 6 x 6 x 2 3 4 8 x 8 x 2 3 4 5 6 10 x 10 x 4 6 8 12 x 12 x 6 8 10

Aprx. Wgt. Each Lbs 2.2 2.9 3.1 6.7 6.9 7.1 10.9 11.1 11.3 11.6 11.9 24.7 25.4 26.2 42.0 44.0 46.0 48.0 50.0 74.0 78.0 86.0 112.0 118.0 130.0

Price Each Painted + + + + $330.00 + + + 426.00 494.00 506.50 + + + + + + + 1512.00 + + + + + +

Galv. + + + + $433.00 439.00 + + + + + + + 1213.00 + + + + + + + + + + +

SECTION 6 PRODUCTS FOR PLAIN END STEEL PIPE

NO. 25-P

NO. 25-P – REDUCING TEE

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability. Reducing Tees, True Ys, Crosses and Laterals are segmentally welded steel.

VICTAULIC.COM PL2016-GENERAL-C

6-7


6-8

VICTAULIC.COM PL2016-GENERAL-C


SECTION 7 – HDPE Products

HDPE Products

VICTAULIC.COM PL2016-GENERAL-C

7-1


Products for Plain End HDPE Plastic Pipe Style 995N HDPE Coupling

Products for Plain End HDPE Plastic Pipe See Section 2 – for Style 920/920N Mechanical-T Outlets.

HDPE Coupling

STYLE 995N – GRADE “E” OR “T” GASKET

PIPE Inches

STYLE 995N

SECTION 7 PRODUCTS FOR PLAIN END HDPE PLASTIC PIPE

Refer to publication 19.02

Nominal Size 2 3 4 5 6 8 10 12 14 16 18 20

Outside Diameter 2.375 3.500 4.500 5.563 6.625 8.625 10.750 12.750 14.000 16.000 18.000 20.000

Aprx. Weight Each Lbs 3.5 7.7 11.6 15.0 16.4 24.9 37.4 47.8 81.0 100.0 127.0 142.0

COUPLING COMPLETE † With Grade “E” or “T” Gasket Price Each Painted Plated $509.00 $564.00 801.00 921.50 1103.50 + 1197.50 1698.00 1439.00 2246.50 1653.50 2804.50 1974.50 3326.50 2276.00 + 5377.50 + 9111.50 + 11146.50 + 15162.50 +

Grade “E” or “T”

Plated Bolt & Nut

Gasket Only $49.00 65.00 85.00 130.00 117.50 171.00 220.00 306.50 459.50 928.50 972.00 1035.50

Size Inches 3 Z\x x Z\x x 3Z\v Z\x x 3Z\v 4 B\, x 4 B\, x B\, x 4Z\v C\v x 6Z\v M\, x 6Z\x 1 x 7# 1 x 7# 1 x 7# 1 x 7#

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability. † Surcharge for couplings supplied without gasket. Contact Victaulic for pricing. * Coupling for High Density Polyethylene Pipe. Style 99 gaskets fit Style 995N couplings up to 12”. # Supplied with T-bolts and rocker washer. NOTE: See Spare Parts Section for spare part prices.

STYLE 995N – HDPE COUPLING KITS INCLUDES PLATED BOLT AND NUT, HARDENED WASHER AND INSTRUCTION SHEET

Size Inches 2 3 4 5 6 8 10 12

Price Each $110.00 125.50 125.50 154.50 154.50 154.50 284.50 295.00

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability.

7-2

VICTAULIC.COM PL2016-GENERAL-C


Products for Plain End HDPE Plastic Pipe Style 905 Coupling for HDPE Pipe

Coupling for HDPE Pipe STYLE 905

Refer to publication 19.07

STYLE 905 – GRADE “S” GASKET

Aprx. Weight Each

PIPE Inches Nominal Size 2 3 4 6

Outside Diameter 2.375 3.500 4.500 6.625

Lbs 5.5 8.5 13.1 19.4

COUPLING COMPLETE With Grade “E” or “T” Gasket Price Each Painted Coated * $267.50 + 327.50 + 419.50 + 569.50 +

Grade “E” or “T” Gasket Only

Fluoropolymer Bolt/Nut/Washer Set

Stainless Steel Retaining Ring †

Price Each + + + +

Size Inches Z\x x 3Z\v B\, x 3Z\x B\, x 4Z\v C\v x 5Z\v

Price Each + + + +

Price Each + + + +

+ Quoted on application. Contact Victaulic for pricing and availability. NOTE: Items listed in shaded areas are non-cancellable and non-returnable. † Set of two required for Style 905 coupling * Fusion bonded epoxy and galvanized finishes available. Contact Victaulic for pricing. NOTE: Available with stainless steel bolts and nuts. Contact Victaulic for pricing.

Coupling for HDPE-toSteel Pipe Refer to publication 19.10

PIPE Inches Nominal Size 2 3 4 6

COUPLING COMPLETE With Grade “E” or “T” Gasket Price Each

Aprx. Weight Each

Outside Diameter 2.375 3.500 4.500 6.625

Lbs 4.7 6.6 9.4 13.8

Painted $371.50 534.50 616.00 901.00

Coated * + + + +

Grade “E” or “T” Gasket Only

Fluoropolymer Bolt/Nut/Washer Set

Price Each + + + +

Size Inches Z\x x 3Z\v B\, x 3Z\x B\, x 4Z\v C\v x 5

Price Each + + + +

Stainless Steel Retaining Ring Price Each + + + +

+ Quoted on application. Contact Victaulic for pricing and availability. NOTE: Items listed in shaded areas are non-cancellable and non-returnable. * Fusion bonded epoxy and galvanized finishes available. Contact Victaulic for pricing. NOTE: Available with stainless steel bolts and nuts. Contact Victaulic for pricing.

Style 908 Coupling for Double Grooved HDPE Pipe Style 994 HDPE Flange Adapter

Style 994 HDPE Flange Adapter

Flange Adapter for HDPE Pipe STYLE 994

Refer to publication 19.04

STYLE 994 – GRADE “E” OR “T” GASKET

PIPE Inches Nominal Size 4 6 8

Outside Diameter 4.500 6.625 8.625

HDPE FLANGE COMPLETE † With Grade “E” or “T” Gasket Aprx. Weight Each Lbs Price Each 12.5 $1182.50 17.3 1534.50 30.8 2042.00

SECTION 7 PRODUCTS FOR PLAIN END HDPE PLASTIC PIPE

STYLE 907

STYLE 907 – GRADE “E” OR “T” GASKET

Grade “E” or “T” Gasket Price Each $101.50 160.50 173.50

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. † Surcharge for couplings supplied without gasket. Contact Victaulic for pricing. HDPE Flange has ductile iron housing. Standard flange bolts, for ANSI Class 125 or 150 mating flanges must be supplied by the installer.

VICTAULIC.COM PL2016-GENERAL-C

7-3


Products for Plain End HDPE Plastic Pipe Style 997 HDPE-to-Steel Transition Coupl

Transition Coupling

STYLE 997 – GRADE “E” OR “T” GASKET

PIPE Inches

STYLE 997 (HDPE TO STEEL)

Refer to publication 19.03

Nominal Size 2 3 4 5 6 8 10 12

Aprx. Weight Each Outside Diameter 2.375 3.500 4.500 5.563 6.625 8.625 10.750 12.750

Lbs 2.8 6.6 8.7 11.5 14.8 21.7 34.3 37.5

COUPLING COMPLETE † With Grade “E” or “T” Gasket Price Each Painted Plated $498.50 $526.00 786.00 855.00 1090.00 1199.00 1251.00 + 1411.50 1580.50 1818.50 2068.00 2172.00 + 2501.00 +

Plated Bolt & Nut Size Inches 2 C\, x Z\x x 2C\v Z\x x 2C\v B\, x 3Z\v B\, x 3Z\v B\, x 3Z\v C\v x 5Z\x M\, x 5Z\x

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability. † Surcharge for couplings supplied without gasket. Contact Victaulic for pricing. NOTE: See Spare Parts Section for spare part prices. Style 77 gaskets fit Style 997 couplings.

SECTION 7 PRODUCTS FOR PLAIN END HDPE PLASTIC PIPE

The HDPE Transition coupling is supplied with painted or plated ductile iron housing. Grade “E” gaskets (Grade “T” available) and plated trackhead bolts and nuts.

7-4

VICTAULIC.COM PL2016-GENERAL-C


SECTION 7 PRODUCTS FOR PLAIN END HDPE PLASTIC PIPE

7-5

VICTAULIC.COM PL2016-GENERAL-C


7-6

VICTAULIC.COM PL2016-GENERAL-C


SECTION 8 – Copper Connection Products

Copper Products

VICTAULIC.COM PL2016-GENERAL-C

8-1


Copper Connection for Grooved Copper Tubing Style 607 QuickVic™ Rigid Coupling for Copper

The Copper Connection Grooved Piping System QuickVic™ Rigid Coupling for Copper STYLE 607

Refer to publication 22.13

STYLE 607 – GRADE “EHP” GASKET

PIPE Inches

Approximate Weight Each

COUPLING COMPLETE With “EHP” Gasket

Nominal Size 2 2Z\x 3 4 5 6 8

Lbs 1.9 2.1 3.0 3.3 5.5 5.8 7.7

Price Each $119.50 135.00 145.00 186.00 304.50 406.50 649.00

SPARE PARTS “EHP” Gasket $86.00 86.50 96.00 142.50 193.00 251.50 345.00

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

No. 670 Installation-Ready 90° Elbow

Installation-Ready™ Fitting for Grooved Copper Tube

NSTALLATION-READY™ FITTING FOR COPPER – 90° ELBOW

Apprx. Wgt. Ea.

PIPE

NO. 670

Refer to publication 22.15

FITTING COMPLETE † With Grade “EHP” or “T” Gasket

Inches Nom. Size 2 2Z\x 3 4

Outside Dia. 2.125 2.625 3.125 4.125

Lbs. 3.6 4.7 10.7 14.5

Price Each $440.00 486.50 601.50 1044.50

SPARE PARTS Plated Bolt & Nut Size No. Inches C\, x 3 C\, x 3 Z\x 3 x Z\x x 3

Grade EHP or "T" Gasket Price Each $86.00 86.50 96.00 142.50

2 2 3 3

† Surcharge for fittings supplied without gasket. Contact Victaulic for pricing. NOTE: Available with stainless steel bolts and nuts. Contact Victaulic for pricing. NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

SECTION 8 COPPER CONNECTION FOR GROOVED COPPER TUBING

No. 670

8-2

No. 610 90° Elbow, No. 611 45° Elbow

Copper Connection Fittings

COPPER FITTINGS – 90° ELBOW OR 45° ELBOW

Nominal Size

Refer to publication 22.04

No. 610

No. 611

Inches 2 2Z\x 3 4 5 6 8

90° ELBOW No. 610 Aprx. Weight Each Lbs 0.9 1.3 4.1 6.7 15.0 20.0 26.0

Price Each $226.00 244.50 346.00 732.00 2682.50 4298.00 6255.50

45° ELBOW No. 611 Aprx. Weight Each Lbs 0.8 1.1 1.6 3.4 10.0 13.0 15.6

Price Each $197.50 215.00 292.50 669.00 2348.50 3641.00 4585.50

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

VICTAULIC.COM PL2016-GENERAL-C


Copper Connection for Grooved Copper Tubing No. 620 Tee, No. 660 Cap

Copper Connection Fittings

COPPER FITTINGS – TEE OR CAP

Nominal Size

TEE No. 620

Refer to publication 22.04

No. 620

No. 660

Aprx. Weight Each Lbs 1.1 1.8 3.2 6.1 18.5 25.5 45.0

Inches 2 2Z\x 3 4 5 6 8

CAP No. 660 Price Each $379.00 400.00 603.00 1323.50 4498.00 4918.00 8310.50

Aprx. Weight Each Lbs 1.2 1.4 1.4 2.4 3.5 4.2 –

Price Each $187.50 209.00 276.00 438.00 1966.00 3740.00 –

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

Reducers – No. 650 Concentric Reducer Groove x Groove

Copper Connection Concentric Reducer NO. 650

Refer to publication 22.04

NO. 650 GROOVED X GROOVE

Nominal Size Inches 2 2Z\x x 3 x 2 2Z\x 4 x 2 2Z\x 3 5 x 3 4 6 x 3 4 5 8 x 6

Aprx. Weight Each Lbs 1.00 0.95 1.03 1.65 1.95 2.02 6.30 6.30 6.40 6.50 6.70 10.00

End to End Inches 3.13 3.38 3.13 3.88 3.63 3.38 3.88 3.38 4.38 3.88 3.38 5.00

No. 650 Grooved x Grooved Price Each $333.50 333.50 333.50 645.00 645.00 645.00 1695.50 1695.50 2233.50 2233.50 2233.50 3083.50

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

No. 652 Concentric Reducer Groove x Cup

Copper Connection Concentric Reducer NO. 652

Nominal Size Inches 2 x 1 1Z\v 1Z\x 1 2Z\x x 1Z\v 1Z\x 2 3 x 1Z\x 2 4 x 2

Aprx. Weight Each Lbs 0.50 0.45 0.45 0.78 0.60 0.65 0.65 1.06 0.99 1.95

End to End Inches 2.70 3.00 2.94 3.25 3.52 3.45 3.30 3.68 4.10 4.75

Cup Inches 0.91 0.97 1.09 0.91 0.97 1.09 1.34 1.09 1.34 1.34

No. 652 Grooved x Cup Price Each $248.50 248.50 248.50 301.00 301.00 301.00 301.00 374.50 374.50 725.00

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

VICTAULIC.COM PL2016-GENERAL-C

SECTION 8 COPPER CONNECTION FOR GROOVED COPPER TUBING

Refer to publication 22.04

NO. 652 GROOVED X CUP

8-3


Copper Connection for Grooved Copper Tubing No. 625 Reducing Tee Groove x Groove

Copper Connection Reducing Tee NO. 625

Refer to publication 22.04

NO. 625 GROOVED X GROOVED

Nominal Size Inches 2 2Z\x x 3 x 2 2Z\x 4 x 2 2Z\x 3 5 x 3 4 6 x 2Z\x 3 4 5

Aprx. Weight Each Lbs 1.58 2.14 2.43 5.25 5.75 6.25 5.41 8.75 6.66 8.12 9.75 11.25

No.625 Grooved x Grooved Price Each $619.00 694.50 662.00 1435.50 1466.00 1541.00 4233.50 4233.50 6616.50 6310.00 6310.00 6616.50

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

Dielectric Waterway Transition Fittings

For CTS to IPS Connections. See pages 8-7 through 8-8.

No. 626 Reducing Tee Groove x Cup

Copper Connection Reducing Tee NO. 626

SECTION 8 COPPER CONNECTION FOR GROOVED COPPER TUBING

Refer to publication 22.04

8-4

NO. 626 GROOVED X CUP

Nominal Size Inches 2 x C\v 1 1Z\v 1Z\x 2Z\x x C\v 1 1Z\v 1Z\x 3 x C\v 1 1Z\v 1Z\x 4 x C\v 1 1Z\v 1Z\x

Weight Each Lbs 0.75 0.81 0.85 0.87 1.00 1.17 1.23 1.32 1.40 1.45 1.74 1.74 2.75 2.86 3.03 3.16

No. 626 Grooved x Grooved x Cup Price Each $280.50 280.50 280.50 270.50 783.50 783.50 783.50 783.50 823.00 823.00 823.00 823.00 1577.50 1577.50 1577.50 1443.50

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

VICTAULIC.COM PL2016-GENERAL-C


Copper Connection for Grooved Copper Tubing Style 641 Vic-Flange Adapter

Copper Connection Vic-Flange Adapter

STYLE 641 – GRADE “E” GASKET

PIPE Inches

STYLE 641

To connect grooved copper to flanged equipment Refer to publication 22.03

Nominal Size 2 2Z\x 3 4 5 6

Outside Diameter 2.125 2.625 3.125 4.125 5.125 6.125

VIC-FLANGE ADAPTER COMPLETE † With Grade “E” Gasket Aprx. Weight Each Price Each Lbs Painted 3.8 $623.50 4.7 649.50 5.4 695.00 7.7 952.00 9.3 1210.00 10.3 1305.00

SPARE PARTS Gasket Price Each $60.00 60.00 74.00 98.50 181.50 186.50

Vic-Flange Washers $171.00 171.00 188.00 255.50 279.50 330.00

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. † Surcharge for couplings supplied without gasket. Contact Victaulic for pricing. NOTE: See Spare Parts Section for spare part prices.

Victaulic flange adapters require a smooth, hard surface at the mating flange face for effective sealing. Some applications, for which the Victaulic flange adapter is otherwise well suited, do not provide an adequate mating surface. In such cases, it is recommended that a metal flange washer be inserted between the Victaulic flange adapter and the mating flange to provide the necessary sealing surface. See Spare Parts Section for flange washer prices. Typical applications where a Victaulic flange washer should be used are: 1. When mating to a serrated flange: a flange gasket should be used adjacent to the serrated flange. The flange washer is then inserted between the Victaulic flange adapter and the flange gasket. 2. When mating to a wafer valve: where typical valves are rubber lined and partially rubber faced (smooth or not), the flange washer is placed between the valve and the Victaulic flange adapter. 3. When mating to a rubber faced flange: the flange washer is placed between the Victaulic flange adapters and the rubber faced flange. 4. When mating C.I. flanges to IPS flanges: the flange washer is placed between two Victaulic flange adapters. If one flange is not a Victaulic flange adapter (e.g., a flanged valve), then a flanged gasket must be placed adjacent to that flange and the flange washer must be inserted between the flange gasket and the Victaulic flange adapter.

Style 622 Copper Mechanical-T Bolted Branch Outlet

VICTAULIC.COM PL2016-GENERAL-C

SECTION 8 COPPER CONNECTION FOR GROOVED COPPER TUBING

5. When mating to components (valves, strainers, etc.) where the component flange face has an insert: follow the same arrangement as in # 1 above.

8-5


Copper Connection for Grooved Copper Tubing Copper Mechanical-T Bolted Branch Outlet STYLE 622

Refer to publication 22.12

STYLE 622 – GRADE “E” EPDM GASKET

Run x Branch Nominal Size Inches 2Z\x x C\v

3

4

x

1 1Z\x C\v

x

1 1Z\x C\v 1 1Z\x

Approximate Weight Each

COMPLETE MECHANICAL-T With Grade “E” Gasket

Lbs 3.1 3.2 4.1 3.4 3.6 4.5 3.3 4.0 5.0

Price Each $650.50 724.50 900.00 675.00 724.50 902.50 704.50 848.00 1026.50

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

Style 622 Copper Mechanical-T Cross

Copper Mechanical-T Cross STYLE 622

Refer to publication 22.12

The following combinations of Mechanical-T Crosses can be achieved with the use of two Mechanical-T Upper Housings of the same run size and the same or different outlet size. Most sizes of Mechanical-T outlets are available with either grooved or female threaded outlets. Your choice must be specified on each order. STYLE 622 – GRADE “E” EPDM GASKET

Run x Branch Nominal Size Inches 2Z\x x C\v

3

4

x

1 1Z\x C\v

x

1 1Z\x C\v 1 1Z\x

Approximate Weight Each

COMPLETE MECHANICAL-T Cross With Grade “E” Gasket

Lbs 4.2 4.4 6.2 4.4 4.8 6.6 4.5 5.4 7.4

Price Each $973.50 1085.00 1344.50 1012.00 1085.00 1351.50 1054.00 1270.00 1539.00

SECTION 8 COPPER CONNECTION FOR GROOVED COPPER TUBING

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

8-6

VICTAULIC.COM PL2016-GENERAL-C


Copper Connection for Grooved Copper Tubing Series 608N Copper Connection Butterfly Valve

Copper Connection Butterfly Valve SERIES 608N

Refer to publication 22.14

SERIES 608N – BARE VALVE, TWO POSITION DETENT, LEVER OPERATOR, OR GEAR OPERATOR

Copper Size Inches 2Z\x 3 4 6

Bare Valve $1688.50 2267.50 3267.00 4702.00

Lever Operator Price Each $2058.50 2639.50 3564.00 5242.50

Gear Operator $3762.00 4354.00 5014.50 7126.50

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

Carbon Steel or Stainless Steel (IPS) to Copper (CTS) Dielectric Transition Fittings Style 647-GT – Grooved x Threaded

Carbon Steel or Stainless Steel (IPS) to Copper (CTS) Dielectric Transition Fitting STYLE 647-GT

Refer to publication 22.21

Grooved x Threaded

STYLE 647-GT – GROOVED X THREADED

PIPE Inches Nominal Size 1 1Z\v 1Z\x 2 2Z\x 3 4

Outside Diameter 1.315 1.660 1.900 2.375 2.875 3.500 4.500

End to End

Price

Number of Pieces

Aprx. Wgt. Each

Inches 4.10 4.10 4.10 4.10 6.10 6.10 6.10

Per Unit $132.00 175.50 203.50 209.00 284.00 510.00 681.50

Per Box 25 10 10 10 6 6 6

Lbs 0.7 1.0 1.1 1.5 3.3 4.3 6.2

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

Style 647-TT – Threaded x Threaded

STYLE 647-TT – THREADED X THREADED

STYLE 647-TT

Refer to publication 22.21

Nominal Size Z\x C\v 1 1Z\v 1Z\x 2 2Z\x 3 4

Outside Diameter 0.840 1.050 1.315 1.660 1.900 2.375 2.875 3.500 4.500

End to End

Price

Number of Pieces

Aprx. Wgt. Each

Inches 3.00 3.00 4.00 4.00 4.00 4.00 6.00 6.00 6.00

Per Unit $67.00 67.00 105.00 150.00 184.50 209.00 284.00 510.00 681.50

Per Box 25 25 25 10 10 10 6 6 6

Lbs 0.2 0.3 0.6 0.8 0.9 1.2 2.9 3.7 5.3

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

VICTAULIC.COM PL2016-GENERAL-C

SECTION 8 COPPER CONNECTION FOR GROOVED COPPER TUBING

Threaded x Threaded

PIPE Inches

8-7


Copper Connection for Grooved Copper Tubing Style 647-GG Grooved x Grooved

STYLE 647-GG – GROOVED X GROOVED

STYLE 647-GG

Refer to publication 22.21

Grooved x Grooved

PIPE Inches Outside Diameter Carbon Steel/ Stainless Nominal Size Steel (IPS) Copper (CTS) 2 2.375 2.125 2Z\x 2.875 2.625 3 3.500 3.125 4 4.500 4.125

End to End

Aprx. Wgt. Each

Price

Number of Pieces

Inches 4.19 6.19 6.19 6.19

Lbs 1.3 3.0 3.9 5.6

Per Unit $320.00 379.00 625.00 1145.50

per Box 10 6 6 6

SECTION 8 COPPER CONNECTION FOR GROOVED COPPER TUBING

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

8-8

VICTAULIC.COM PL2016-GENERAL-C


SECTION 9 – Aluminum Products

Aluminum Products

VICTAULIC.COM PL2016-GENERAL-C

9-1


Products for Grooved Aluminum Pipe SECTION 9 PRODUCTS FOR GROOVED ALUMINIUM PIPE

Style 77A Aluminum Coupling, Style 78A Aluminum Snap-Joint Coupling

Products for Grooved Aluminum Pipe Aluminum Coupling

STYLE 77A WITH GRADE “E” OR “T” GASKET

STYLES 77A AND 78A

PIPE Inches

Style 77A Refer to publication 21.01.

Aprx. Wgt. Ea.

Nominal Size

Outside Diameter

1

2Z\x 3 4 5 6 8 12

1.315 1.900 2.375 2.875 3.500 4.500 5.563 6.625 8.625 12.000

2

2.375

1Z\x 2

COUPLING COMPLETE † Grade “E” or “T” Gasket

Lbs STYLE 77A 0.8 1.2 1.2 1.6 1.8 3.8 5.3 5.7 9.6 17.5 STYLE 78A 1.2

SPARE PARTS Plated Bolt & Nut Size Inches

Price Each $141.00 143.50 240.00 276.00 453.50 634.00 953.00 954.00 1273.50 1924.50

C\, Z\x Z\x Z\x Z\x B\, C\v C\v M\, 1

x x x x x x x x x x

2 2Z\x 2Z\x 2C\v 2C\v 3Z\v 4Z\v 4Z\v 5 6Z\x

$262.00

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability. † Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.

Style 78A Refer to publication 21.02.

Style 77A couplings consist of aluminum (356T6 alloy) housings, Grade “T” or “E” synthetic gasket and plated steel bolts and nuts. Style 78A couplings consist of aluminum (Tenzalloy) housings, Grade “T” or “E” synthetic gasket. Additional gasket compounds and coupling sizes priced on application. ALWAYS SPECIFY GASKET GRADE WHEN ORDERING. NOTE: See Spare Parts Section for spare part prices.

Aluminum Fittings

Aluminum Fittings Refer to publication 21.03

No. 10A

No. 11A

ALUMINUM FITTINGS – 90° ELBOW OR 45° ELBOW

Nominal Size Inches 1 1Z\x 2 2Z\x 3 4 5 6 8

90° ELBOW No.10A Aprx. Weight Each Lbs 0.2 0.5 0.7 1.0 1.7 2.6 5.2 6.5 15.2

Price Each + + + + + + + + +

45° ELBOW No.11A Aprx. Weight Each Lbs 0.2 0.4 0.6 0.7 1.2 2.0 4.7 (sw) 6.5 14.0

Price Each + + + + + + + + +

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability. Fittings made of aluminum (356T6 alloy). Additional sizes and items priced on application. Other fittings available. Contact Victaulic for price and delivery. (sw) Segmentally welded.

9-2

VICTAULIC.COM PL2016-GENERAL-C


Products for Grooved Aluminum Pipe ALUMINUM FITTINGS – TEE OR CAP

No. 20A

No. 60A

Inches 1 1Z\x 2 2Z\x 3 4 5 6 8

Aprx. Weight Each Lbs 0.4 0.7 1.0 1.5 2.5 4.6 8.0 9.1 18.4

CAP No. 60A Price Each + + + + + + + + +

Aprx. Weight Each Lbs 0.1 0.2 0.3 0.3 0.5 1.0 2.1 3.0 6.0

Price Each + + + + + + + + +

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

SECTION 9 PRODUCTS FOR GROOVED ALUMINIUM PIPE

TEE No. 20A

Nominal Size

+ Quoted on application. Contact Victaulic for pricing and availability. Fittings made of aluminum (356T6 alloy). Additional sizes and items priced on application. Other fittings available. Contact Victaulic for price and delivery.

VICTAULIC.COM PL2016-GENERAL-C

9-3


9-4

VICTAULIC.COM PL2016-GENERAL-C


SECTION 10 – Large Diameter AGS Vic-Ring Products

Large Diameter AGS Vic-Ring Products

VICTAULIC.COM PL2016-GENERAL-C

10-1


Large Diameter Piping Products Large Diameter Piping Solutions

Large Diameter Piping Products Bolted Split-Sleeve Couplings

• Provides a reliable, economical alternative to traditional bolted sleeve-type couplings. • Available in a variety of styles to meet specific application requirements, including:

• Bolted Split-Sleeve Flexible Coupling Unrestrained, flexible bottle-tight joints (E x E) • Bolted Split-Sleeve Restrained Flexible Coupling Fully restrained pipe joints without external harnessing (F x F) • Bolted Split-Sleeve Expansion Couplings Pipe joints that provide for thermal expansion and contraction (F x E)

SECTION 10 LARGE DIAMETER PIPING PRODUCTS

• D-O-L couplings meet or exceed the design, material and performance standards set forth in AWWA C-219.

Master Series Fluid/ AirMaster

• Designed to provide fully restrained joints for air and fluid-conveying pipelines. • Shouldered couplings that are designed to operate at design pressures of the system. • Meet or exceed the performance standards set forth in AWWA C-606.

Expansion Joint

• Complete line of expansion joints. • Offers solutions for accommodating thermal expansion and contraction of pipelines. • Products include:

• OmniFlex Stainless Steel Bellows-Type Expansion Joints (can also accommodate lateral movement) • D-O-L Bolted Split-Sleeve Expansion Coupling (accommodates expansion/contraction up to 6Z\x”) • Paragon Expansion Joints Fabricated Mechanical Expansion Joints For more information on the above products, contact your local sales representative or call 905/884-7444 Vic-Ring Check Sheet for W07/W77/W89 AGS Couplings

10-2

VICTAULIC.COM PL2016-GENERAL-C


Large Diameter Piping Products Vic-Ring Check Sheet for W07/W77/W89 AGS Couplings Send US, Asia, and Europe inquiries to: ep@victaulic.com or fax to: 610-923-3010 To speak with a Customer Service representative in the US, please call 1-800-PICK-VIC In Canada, please e-mail viccanada@victaulic.com or fax 905-884-7446 The joining of pipe with a suitable Victaulic Vic-Ring coupling presents individual considerations that require review by a Victaulic Piping System expert who is experienced in special pipe joining applications. For more information please contact Victaulic, or refer to Victaulic Company’s Vic-Ring submittals available at www.victaulic.com. TO OBTAIN A QUOTE, PLEASE PROVIDE THE INFORMATION REQUESTED BELOW.

CUSTOMER INFORMATION: DISTRIBUTOR:

DISTRIBUTOR CONTACT NAME:

DISTRIBUTOR PHONE/FAX:

DISTRIBUTOR E-MAIL:

PHONE:

FAX:

CONTRACTOR:

CONTRACTOR CONTACT NAME:

CONTRACTOR PHONE/FAX:

CONTRACTOR E-MAIL:

PHONE:

FAX:

PROJECT NAME:

PROJECT LOCATION:

SECTION 10 LARGE DIAMETER PIPING PRODUCTS

PROJECT BID DATE:

APPLICATION DATA: NOMINAL PIPE SIZE:

ACTUAL PIPE OD:

WALL THICKNESS:

PIPE MATERIAL: Carbon Steel: Grade __________

Schedule __________

Class __________

Schedule __________

Stainless Steel - Type: Ductile Iron: Pressure __________

Class __________

System Working Pressure (psi): __________

Test/Proof Pressure (psi): __________

Temperature (Deg. F): __________ Media/Service: ____________________________

CONFIGURATION INFORMATION: COUPLING: RINGS:

STYLE: SIZE (= PIPE O.D.):

QTY:

(per Joint – pipe to pipe connections require two rings)

LINING OPTION: UNLINED

ABRASION

FLUSH

OVERHUNG

RUBBER LINED FLUSH

RUBBER LINED OVERHUNG

ABRASION AND CORROSION RUBBER LINED WITH PROTECTIVE BUMPER – FLUSH RUBBER LINED – FLUSH

RUBBER LINED WITH PROTECTIVE BUMPER – OVERHUNG

RUBBER LINED – OVERHUNG CHROMIUM CARBIDE OVERLAY (CCO)

6287 Rev.A

VICTAULIC.COM PL2016-GENERAL-C

10-3


Large Diameter Piping Products Style W07 AGS Rigid Coupling for AGS Vic-Ring System

Vic-Ring Couplings and Adapter Rings Rigid Coupling For AGS Vic-Ring System AGS STYLE W07

Refer to publication 16.11

SECTION 10 LARGE DIAMETER PIPING PRODUCTS

14 – 24”

10-4

26 – 48”

AGS STYLE W07 – FOR AGS VIC-RING SYSTEM

PIPE Inches Nom. Outside Size Dia. 14 14.000 16 16.000 18 18.000 20 20.000 22 22.000 24 24.000 26 26.00 28 28.000 30 30.000 32 32.000 34 34.000 36 36.000 38 38.000 40 40.000 42 42.000 44 44.000 46 46.000 48 48.000

Aprx. Wgt. Ea

COUPLING COMPLETE † With Flush-Seal Grade “E” Gasket

COUPLING COMPLETE † With Flush-Seal Silicone Grade “T” or “L” Gasket

Price Each Lbs. 48.9 60.8 71.2 81.7 116.0 116.2 205.0 220.0 227.0 242.0 255.0 268.0 340.0 340.0 360.0 390.0 415.0 425.0

Painted $859.00 1249.00 1392.50 1944.50 + 2126.50 + + + + + + + + + + + +

Galv. $1313.00 1836.00 2073.50 2765.50 + 3219.50 + + + + + + + + + + + +

Price Painted $1015.50 1439.50 1782.00 2177.00 + 2374.50 + + + + + + + + + + + +

SPARE PARTS AGS Each Vic-Ring Plated Bolt & Nut Price Size § Galv. Each No. Inches $1470.50 + 2 1 x 5Z\x 2028.00 + 2 1 x 5Z\x 2268.50 + 2 1 x 5Z\x 2274.00 + 2 1Z\, x 5Z\x + + 2 1Z\, x 5Z\x 3467.00 + 2 1Z\, x 5Z\x + + 4 1C\, x 6 + + 4 1C\, x 6 + + 4 1Z\v x 7 + + 4 1Z\v x 7 + + 4 1Z\v x 7 + + 4 1Z\v x 7 + + 4 1Z\x x 7 + + 4 1Z\x x 7 + + 4 1Z\x x 7 + + 4 1Z\x x 7 + + 4 1Z\x x 7 + + 4 1Z\x x 7

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability. † Surcharge for couplings supplied without gasket. Contact Victaulic for pricing. § Metric thread size bolts available. Contact Victaulic. NOTE: See Spare Parts Section for spare part prices.

VICTAULIC.COM PL2016-GENERAL-C


Large Diameter Piping Products Style W77 AGS Flexible Coupling for AGS Vic-Ring System

Flexible Coupling for AGS Vic-Ring System AGS STYLE W77

Refer to publication 16.12

14 – 24”

26 – 60”

AGS STYLE W77 – FOR AGS VIC-RING SYSTEM

PIPE

COUPLING COMPLETE † With Flush-Seal Silicone Grade “T” or “L” Gasket

Price Each Lbs 47.5 57.8 65.0 82.3 107.0 106.8 205.0 220.0 227.0 242.0 255.0 268.0 340.0 340.0 360.0 390.0 415.0 425.0 648.0 676.0 720.0

Painted $1007.00 1312.50 1461.50 2042.00 + 2232.50 + + + + + + + + + + + + + + +

Galv. $1470.00 1887.50 2106.00 2880.50 + 3270.50 + + + + + + + + + + + + + + +

Price Painted $1163.50 1503.50 1656.00 2275.50 + 2482.50 + + + + + + + + + + + + + + +

SPARE PARTS AGS Each Vic-Ring Plated Bolt & Nut Price Size § Galv. Each No. Inches $1699.50 + 2 1 x 5Z\x 2170.50 + 2 1 x 5Z\x 2403.00 + 2 1 x 5Z\x 3253.50 + 2 1Z\, x 5Z\x + + 2 1Z\, x 5Z\x 3678.50 + 2 1Z\, x 5Z\x + + 4 1Z\, x 6 + + 4 1Z\, x 6 + + 4 1Z\v x 7 + + 4 1Z\v x 7 + + 4 1Z\v x 7 + + 4 1Z\v x 7 + + 4 1Z\x x 7 + + 4 1Z\x x 7 + + 4 1Z\x x 7 + + 4 1Z\x x 7 + + 4 1Z\x x 7 + + 4 1Z\x x 7 + + 4 1Z\x x 7 + + 4 1Z\x x 7 + + 4 1Z\x x 7

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability. † Surcharge for couplings supplied without gasket. Contact Victaulic for pricing. § Metric thread size bolts available. Contact Victaulic. NOTE: See Spare Parts Section for spare part prices. NOTE: 14 – 72” standard for this size range is the W77 AGS flexible coupling.

VICTAULIC.COM PL2016-GENERAL-C

SECTION 10 LARGE DIAMETER PIPING PRODUCTS

Inches Nom. Outside Size Dia. 14 14.000 16 16.000 18 18.000 20 20.000 22 22.000 24 24.000 26 26.000 28 28.000 30 30.000 32 32.000 34 34.000 36 36.000 38 38.000 40 40.000 42 42.000 44 44.000 46 46.000 48 48.000 54 54.000 56 56.000 60 60.000

Aprx. Wgt. Ea.

COUPLING COMPLETE † With Flush-Seal Grade “E” Gasket

10-5


10-6

VICTAULIC.COM PL2016-GENERAL-C


SECTION 11 – Pipe Preparation Tools

Pipe Preparation Tools

LEASE PURCHASE AGREEMENT Some tools manufactured by Victaulic are available through a lease purchase agreement. Contact Victaulic for details.

VICTAULIC.COM PL2016-GENERAL-C

11-1


Pipe Preparation Tools Victaulic® Roll Grooving For proper selection of grooving rolls for different alloys, please use the following selection guide. Also note all tools are equipped with carbon steel rolls only. All other types of grooving rolls are optional. Groove Type OGS AGS Stainless Steel – OGS Stainless Steel – AGS ES Copper PVC/Aluminum

Color Code Black Black/Yellow Band Black Silver Black/Yellow Band Silver/Black Band Black Copper Gold

Alloy Carbon Steel Carbon Steel Stainless Steel (Standard Wall Only) Stainless Steel (Light Wall Only) Stainless Steel (Standard Wall Only) Stainless Steel (Light Wall Only) Carbon Steel Copper PVC/Aluminum

Part Number Indentification R RW R RX RW RWX RZ RR RP

Vic-Easy ® Roll Grooving Tools – Field Portable VE12

Vic-Easy Roll Grooving Tools – Field Portable VE12

VE12 is designed for manual grooving of C\v – 2” steel, stainless steel, aluminum and PVC pipe.

Tool Model

Part Number R000012VE0 R200012VE0

VE12 VE12SS Tool Ratings — Maximum Pipe Size Capacity Model VE12 VE12SS

Tool List Price $2903.00 2903.00

Pipe Size (in | mm) / Schedule

Pipe Material Notes Steel Stainless Aluminum PVC Plastic Lt. Wall SS

Tool Weight/ Shipping Weight Lbs 17/20 17/20

1

¾ 20 5 – 10 5 – 10

1 25

1¼ 1½ 32 40 5 – 40 40S 5 – 40 40 5S – 10S

2 50

SECTION 10 PIPE PREPARATION TOOLS

1. 6061-T4 or 6063-T4 Alloy must be used.

Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.

11-2

VICTAULIC.COM PL2016-GENERAL-C


Pipe Preparation Tools VE26 S/C/SS/P

VE26

VE26 is designed for manual grooving of 2 – 6” steel, stainless steel, aluminum, PVC, and copper tube.

Tool Model VE26S – Steel, Stainless Steel VE26C – Copper Tube VE26SS – Lightwall Stainless Steel VE26P – Aluminum and PVC Pipe

Tool Weight/ Shipping Weight Lbs 22/25 22/25 22/25 22/25

Part Number R100026VE0 R200026VE0 R700026VE0 R750026VE0

Tool List Price $2903.00 2903.00 2903.00 2903.00

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

Tool Ratings — Maximum Pipe Size Capacity Model VE26S VE26C VE26AC VE26P VE26SS

Pipe Size (in | mm) / Schedule

Pipe Material Notes Steel Stainless Copper Australia Copper Aluminum PVC Plastic Lt. Wall SS

2 50

2½ 3 4 5 6 60 80 100 125 150 5 – 40 5 – 10 40S Only K, L, M and DWV A, B and D

1

5 – 40

5 – 10 40 5S – 10S

1. 6061-T4 or 6063-T4 Alloy must be used.

VE26/VE46 Power Drive Kit

VE26/VE46 Power Drive Kit

Power Drive Kit for the updated VE26 and VE46 In-Place Roll Grooving Tools allows for the new and improved VE26/VE46 to alternately groove pipe using stationary power drive.

Tool Model VE26/VE46 Power Drive Kit

Tool Weight/ Shipping Weight Lbs 7/9

Part Number R075-026-KIT

Tool List Price $568.50

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

VE46/P

VE46

VE46 is designed for manual grooving of 3Z\x – 6” steel, stainless steel, aluminum and PVC.

Tool Model

Tool Weight/ Shipping Weight Lbs 28/31 28/31 28/31 28/31

Part Number R000046VE0 R000046VE0 R200046VE0 R200046VE0

VE46 – Steel VE46 – Stainless Steel VE46P – Aluminum and PVC Plastic VE46P – PVC Plastic

Tool List Price $3312.00 3312.00 3312.00 3312.00

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

Model VE46S VE46P

Pipe Size (in | mm) / Schedule

Pipe Material Notes Steel Stainless Aluminum PVC Plastic

3½ 90

1 40

4 100

4½ 5 120 125 5 – 40 40S Only 5 – 40 40 – 80

6 150

1. 6061-T4 or 6063-T4 Alloy must be used.

SECTION 10 PIPE PREPARATION TOOLS

Tool Ratings — Maximum Pipe Size Capacity

Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.

VICTAULIC.COM PL2016-GENERAL-C

11-3


Pipe Preparation Tools VE226 B/S/M/C/BSS/MSS/P

VE226 B/S/M/C/BSS/ MSS/P †

VE226 is designed for use with a standard C\,” square drive for roll feed with operator supplied ratchet wrench to roll groove C\v – 6” steel, stainless steel, aluminum, PVC and copper tube. Included are feeler gauges and allen wrench for depth stop setting. Built-on mount fits Victaulic VPD752 and Ridgid 300® power drives (other drive mounts available, including Oster 310, Ridgid 535, Ridgid 1224 and Ridgid 1822).

Tool Model VE226B – C\v – 1Z\x”/20 – 40 mm VE226S – 1Z\v – 6”/32 – 150 mm VE226M – 2 – 6”/50 – 150 mm VE226C – 2 – 6”/50 – 150 mm VE226BSS – C\v – 1Z\x”/20 – 40 mm VE226MSS – 2 – 6”/50 – 150 mm VE226P – 2 – 6”/50 – 150 mm Aluminum and PVC Plastic

Part Number R2022260FS R2002260FS R3002260FS R1002260FS R00X2260FS RXM02260FS

Tool Weight/ Shipping Weight Lbs 27/42 27/42 27/42 27/42 27/42 27/42

Tool List Price ^ $3258.50 3258.50 3258.50 3258.50 3258.50 3258.50

R6002260FS

27/42

3258.50

† NOTE: When ordering tools that require a power drive, you must determine the type of drive to be used. ^ For proper operation, a power drive and pipe stand are required. See Accessories for details. NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

Tool Ratings — Maximum Pipe Size Capacity ¾ Pipe Material Notes 20 Steel VE226S Stainless Steel Stainless VE226B 1 Aluminum PVC Plastic 40 Steel VE226M Stainless VE226C Copper VE226BSS Lt. Wall SS VE226MSS Lt. Wall SS 1 Aluminum VE226P PVC Plastic Model

Pipe Size (in | mm) / Schedule 1 25

1¼ 32

1½ 2 40 50 5 – 40 40S Only

2½ 60

3 80

3½ 90

4 4½ 100 120 5 – 10

5 125

6 150

5 – 40 40S Only 5 – 40 40 – 80 5 – 40 40S Only K, L, M and DWV

5 – 10

5S – 10S 5S – 10S 5 – 40 40 – 80

5 – 10 40

1. 6061-T4 or 6063-T4 Alloy must be used.

VE226 Power Drive Kit

VE226 Power Drive Kit

Kit for connecting a VE226 Roll Grooving Tool to a Ridgid * 700 Power Drive. * Ridgid is a registered trademark of the Ridge Tool Company.

Tool Model VE226 Power Drive Kit †

Part Number R700-226-KIT

Tool Weight/ Shipping Weight Lbs 75/115

Tool List Price $4195.00

† Drive unit not included.

SECTION 10 PIPE PREPARATION TOOLS

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.

11-4

VICTAULIC.COM PL2016-GENERAL-C


Pipe Preparation Tools Vic-Easy Roll Grooving Tools – Field Fabrication VE106

Vic-Easy Roll Grooving Tools – Field Fabrication VE106 Groove-N-Go

VE106 portable roll grooving tool with a self-contained power drive provides capability of grooving 1Z\v – 6”/32 – 150 mm pipe, up to and including Schedule 40. The tool requires 110V, 15-amp power source. Tool is supplied complete with 1Z\v – 3”/25 – 80 mm carbon steel roll sets; 4 – 6”/100 – 150 mm carbon steel rolls are installed.

Tool Model VE106 Groove-N-Go 110V

Part Number R000106110

Tool Ratings — Maximum Pipe Size Capacity Model VE106

Tool List Price $7552.50

Pipe Size (in | mm) / Schedule

Pipe Material Notes Steel Stainless Lt. Wall SS Copper

Tool Weight/ Shipping Weight Lbs. 140/200

1¼ 32

1½ 40

2, 3 2 4 5

2 50

2½ 60

3 3½ 4 80 90 100 5 – 40 40S 5S – 10S K, L, M and DWV

5 125

6 150

2. Use standard grooving rolls marked with the prefix R. 3. EndSeal™ grooving rolls marked with the prefix RZ are available. Contact Victaulic® for details. 4. Use grooving rolls marked with the prefix RX. 5. Use grooving rolls marked with the prefix RR. VE106 GROOVING ROLLS *

Pipe Material Standard – Carbon Steel and Sch. 40 Stainless Copper Stainless RX EndSeal

Part Number R912106UA6 R912106L03 R904106L06 RR02106006 RX12106L06 RZ02106003 RZ04106006

Pipe Size Range inches | mm 1Z\v – 6/32 – 150 Upper 1Z\v – 3/32 – 80 Lower 4 – 6/100 – 150 Lower 2 – 6/50 – 150 1Z\v – 6/32 – 150 Lower 1Z\v – 3/32 – 80 4 – 6/100 – 150

Purchase List Price Each Set † $301.50 848.00 848.00 1155.00 959.00 1782.00 2006.50

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. § ROLLS CAN ONLY BE RENTED WITH A TOOL RENTAL. Any rental tool requiring extra rolls, in addition to standard rolls supplied, such as RR (Copper), RX (Stainless Steel), RP (Plastic), RZ (EndSeal) will incur an additional rental charge per roll set. † Upper and lower rolls (1 of each per set) can be sold separately. Contact Victaulic. * Refer to How to Order at the end of this section.

SECTION 10 PIPE PREPARATION TOOLS

Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.

VICTAULIC.COM PL2016-GENERAL-C

11-5


Pipe Preparation Tools VE206 Portable Roll Grooving Tool

VE206 Portable Roll Grooving Tool

VE206 portable roll grooving tool with a self-contained power drive provides capability of grooving 1Z\v – 6”/32 – 150 mm pipe, up to and including Schedule 40. The tool requires 110V, 15-amp power source. Tool is supplied complete with standard roll sets for steel 1Z\v” – 6”/32 – 150 mm (4 – 6”/100 – 150 mm rolls are installed). Tool Model VE206 – 110V with Ridgid* 700 Power Drive VE206 – 110V without power drive unit

Part Number R000206MAS R000206MA1

Tool Weight Lbs 165 220

Tool List Price $10724.50 7620.00

* Ridgid is a registered trademark of the Ridge Tool Company. Other compatible power drive units are available upon request.

Tool Ratings — Maximum Pipe Size Capacity Model VE206

Pipe Size (in | mm) / Schedule

Pipe Material Notes Steel Stainless Lt. Wall SS Copper

1¼ 32

1½ 40

2, 3 2 4 5

2 50

2½ 60

3 3½ 4 80 90 100 5 – 40 40S 5S – 10S K, L, M and DWV

5 125

6 150

2. Use standard grooving rolls marked with the prefix R. 3. EndSeal™ grooving rolls marked with the prefix RZ are available. Contact Victaulic® for details. 4. Use grooving rolls marked with the prefix RX. 5. Use grooving rolls marked with the prefix RR. VE206 GROOVING ROLLS *

Pipe Material Standard – Carbon Steel and Sch. 40 Stainless Copper Stainless RX EndSeal

Part Number R912106UA6 R912106L03 R904106L06 RR02106006 RX12106L06 RZ02106003 RZ04106006

Pipe Size Range inches | mm 1Z\v – 6/32 – 150 Upper 1Z\v – 3/32 – 80 Lower 4 – 6/100 – 150 Lower 2 – 6/50 – 150 1Z\v – 6/32 – 150 Lower 1Z\v – 3/32 – 80 4 – 6/100 – 150

Purchase List Price Each Set † $301.50 848.00 848.00 1155.00 959.00 1782.00 2006.50

§ ROLLS CAN ONLY BE RENTED WITH A TOOL RENTAL. Any rental tool requiring extra rolls, in addition to standard rolls supplied, such as RR (Copper), RX (Stainless Steel), RP (Plastic), RZ (EndSeal) will incur an additional rental charge per roll set. † Upper and lower rolls (1 of each per set) can be sold separately. Contact Victaulic. * Refer to How to Order at the end of this section.

SECTION 10 PIPE PREPARATION TOOLS

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.

11-6

VICTAULIC.COM PL2016-GENERAL-C


Pipe Preparation Tools VE272SFS

VE272SFS

The VE272SFS portable roll groover mounts easily to the Victaulic VPD752 or Ridgid 300® Power Drive. The VE272SFS is operated using a hand pump. A unique pivot arm design reduces handle effort. Roll changes are quick and easy. The VE272SFS is also equipped with Victaulic Company’s patented, Enhanced-Tracking grooving rolls. The tool is supplied complete with 2 – 12” roll sets; 8 – 12” rolls are installed. NOTE: Optional C\v and 1 – 1Z\x” grooving rolls available. Requires a VPD752 or Ridgid 300 power drive. Tool Weight/ Shipping Weight Tool Model Part Number Lbs VE272SFS R000272SFS 184/250 Optional Stabilizer (8 – 12”/200 – 300 mm only) R4002720FS –

Rental Per Month $1603.50 386.50

Tool List Price $12584.50^ 2892.50

^ For proper operation, a power drive and pipe stand are required. See Accessories for details. NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

Tool Ratings — Maximum Pipe Size Capacity ¾ Pipe Material Notes 20 Steel 2, 3 Stainless 2 Lt. Wall SS 4, 13 VE272SFS Aluminum 1 PVC Plastic 6, 14 Copper 5, 13 Model

Pipe Size (in | mm) / Schedule 1 25

1¼ 1½ 32 40

2 50

40

2½ 3 3½ 4 5 6 8 10 12 60 80 90 100 125 150 200 250 300 5 – 40 5 – 20 40S .250 5S – 10S 5 – 40 5 – 20 40 – 80 40 K, L, M and DWV

1. 6061-T4 or 6063-T4 Alloy must be used. 2. Use standard grooving rolls marked with the prefix R. 3. EndSeal™ grooving rolls marked with the prefix RZ are available. Contact Victaulic® for details. 4. Use grooving rolls marked with the prefix RX. 5. Use grooving rolls marked with the prefix RR. 6. Use grooving rolls marked with the prefix RP. 13. Use sway brace for 8”/200 mm copper and 8”-12”/200 – 300 mm lightwall stainless steel.

SECTION 10 PIPE PREPARATION TOOLS

Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.

VICTAULIC.COM PL2016-GENERAL-C

11-7


Pipe Preparation Tools VE272SFS GROOVING ROLLS *

Pipe Material

Standard

OGS-200 Groove Profile Copper

Stainless RX

EndSeal

PVC/Aluminum

Part Number R900268001 R900268002 R902272003 R904272006 R908272012 R9S2268003 R9S4268006 RR02272006 RR08272008 RX75268001 RX01268002 RX02272003 RX04272006 RX08272012 RZ02272003 RZ04272006 RZ08272012 RP02272003 RP04272L06 RP08272012

Pipe Size Range inches|mm C\v/20 1 – 1Z\x/25 – 40 2 – 3Z\x/50 – 90 4 – 6/100 – 150 8 – 12/200 – 300 2 – 3/50 – 80 4 – 6/100 – 150 2 – 6/50 – 150 8/200 C\v/20 1 – 1Z\x/25 – 40 2 – 3Z\x/50 – 90 4 – 6/100 – 150 8 – 12/200 – 300 2 – 3Z\x/50 – 90 4 – 6/100 – 150 8 – 12/200 – 300 2 – 3Z\x/50 – 90 4 – 6/100 – 150 8/200

Rental Per Month §

$166.50 (per set)*

Purchase List Price Each Set † $3222.00 2831.50 1915.00 1915.00 2072.00 2121.50 2267.50 2595.50 2855.50 4629.00 4207.50 2960.50 3197.00 3197.00 3453.00 3537.00 3668.00 1943.00 + +

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability.

SECTION 10 PIPE PREPARATION TOOLS

§ ROLLS CAN ONLY BE RENTED WITH A TOOL RENTAL. Any rental tool requiring extra rolls, in addition to standard rolls supplied, such as RR (Copper), RX (Stainless Steel), RP (Plastic), RZ (EndSeal) will incur an additional rental charge per roll set. † Upper and lower rolls (1 of each per set) can be sold separately. Contact Victaulic. * Refer to How to Order at the end of this section.

Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.

11-8

VICTAULIC.COM PL2016-GENERAL-C


Pipe Preparation Tools VE270FSD

VE270FSD

Completely self-contained unit with integral gear motor, safety guards, safety foot switch and power cord/plug. The VE270FSD uses a 110 power source, with a 220V model optional upon request. The tool is supplied complete with 2 – 12” roll sets; 8 – 12” rolls are installed. NOTE: Optional C\v and 1 – 1Z\x” grooving rolls available.

Tool Model VE270FSD – 110V Optional stabilizer (8 – 12”/200 – 300 mm only)

Tool Weight/ Shipping Weight Part Number Lbs R000270FSD 340/410 R400276FSD –

Rental Per Month $2696.50 386.50

Tool List Price $21180.00^ 2892.50

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. ^ For proper operation, a pipe stand is required. See Accessories for details.

Tool Ratings — Maximum Pipe Size Capacity ¾ Pipe Material Notes 20 Steel 2, 3 Stainless 2 4, 13 VE270FSD/ Lt. Wall SS VE271FSD Aluminum 1 PVC Plastic 6, 14 Copper 5, 13 Model

Pipe Size (in | mm) / Schedule 1 25

1¼ 1½ 32 40

2 50

40

2½ 3 3½ 4 5 6 8 10 12 60 80 90 100 125 150 200 250 300 5 – 40 5 – 20 40S .250 5S – 10S 5 – 40 5 – 20 40 – 80 40 K, L, M and DWV

1. 6061-T4 or 6063-T4 Alloy must be used. 2. Use standard grooving rolls marked with the prefix R. 3. EndSeal™ grooving rolls marked with the prefix RZ are available. Contact Victaulic® for details. 4. Use grooving rolls marked with the prefix RX. 5. Use grooving rolls marked with the prefix RR. 6. Use grooving rolls marked with the prefix RP. 13. Use sway brace for 8”/200 mm copper and 8”-12”/200 – 300 mm lightwall stainless steel.

SECTION 10 PIPE PREPARATION TOOLS

Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.

VICTAULIC.COM PL2016-GENERAL-C

11-9


Pipe Preparation Tools VE270FSD GROOVING ROLLS *

Pipe Material

Standard

Copper

Stainless RX

EndSeal

PVC/Aluminum

Part Number R900268001 R900268002 R902272003 R904272006 R908272012 RR02272006 RR08272008 RX75268001 RX01268002 RX02272003 RX04272006 RX08272012 RZ02272003 RZ04272006 RZ08272012 RP02272003 RP04272L06 RP08272012

Pipe Size Range inches | mm C\v/20 1 – 1Z\x/25 – 40 2 – 3Z\x/50 – 90 4 – 6/100 – 150 8 – 12/200 – 300 2 – 6/50 – 150 8/200 C\v/20 1 – 1Z\x/25 – 40 2 – 3Z\x/50 – 90 4 – 6/100 – 150 8 – 12/200 – 300 2 – 3Z\x50 – 90 4 – 6/100 – 150 8 – 12/200 – 300 2 – 3Z\x/50 – 90 4 – 6/100 – 150 8/200

Rental Per Month §

$166.50 (per set)*

Purchase List Price Each Set † $3222.00 2831.50 1915.00 1915.00 2072.00 2595.50 2855.50 4629.00 4207.50 2960.50 3197.00 3197.00 3453.00 3537.00 3668.00 1943.00 + +

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability.

SECTION 10 PIPE PREPARATION TOOLS

§ ROLLS CAN ONLY BE RENTED WITH A TOOL RENTAL. Any rental tool requiring extra rolls, in addition to standard rolls supplied, such as RR (Copper), RX (Stainless Steel), RP (Plastic), RZ (EndSeal) will incur an additional rental charge per roll set. † Upper and lower rolls (1 of each per set) can be sold separately. Contact Victaulic. * Refer to How to Order at the end of this section.

Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.

11-10

VICTAULIC.COM PL2016-GENERAL-C


Pipe Preparation Tools VE416FS

VE416FS

VE416FS is provided with a mounting stand for field or shop assembly and set up. The stand and tool must be mounted to a VPD752 or Ridgid 300® 38 rpm power drive before grooving. VE416FS is supplied complete with 2 – 16” roll sets* (8 – 12” rolls are installed, unless otherwise specified). It is equipped with a pipe stabilizer for 6 – 16” nominal pipe sizes to prevent pipe sway. VE416FS is designed for occasional field grooving of AGS pipe. 2 – 12” Original Groove Rolls and 14 – 16” AGS Groove Rolls

Tool Model VE416FS

Part Number R0004160FS

Tool Weight/ Shipping Weight Lbs 240/400

Rental Per Month $3721.00

Tool List Price $30524.00^

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. ^ For proper operation, a pipe stand is required. See Accessories for details.

Optional Rolls: Optional rolls are available for Schedule 5S and 10S stainless steel pipe, PVC and aluminum pipe, and type K, L, M and DWV copper tubing. Pipe Size (in | mm) / Schedule Tool Ratings — Maximum Pipe Size Capacity Model

VE416FS

2 Pipe Material Notes 50 Steel 2, 3 Stainless 2 Lt. Wall SS 4 Aluminum 1, 6 PVC Plastic 6 40 Copper 5

OGS 2½ 60

AGS

3 80

4 5 6 8 10 12 14 16 100 125 150 200 250 300 350 400 5 – 40 10 – STD STD Wall AGS 40S STD STD Wall RW AGS 5S – 10S 10S RWX 5 – 40 5 – STD 40 – 80 40 K, L, M and DWV

1. 6061-T4 or 6063-T4 Alloy must be used. 2. Use standard grooving rolls marked with the prefix R. 3. EndSeal™ grooving rolls marked with the prefix RZ are available. Contact Victaulic® for details. 4. Use grooving rolls marked with the prefix RX. 5. Use grooving rolls marked with the prefix RR. 6. Use grooving rolls marked with the prefix RP.

SECTION 10 PIPE PREPARATION TOOLS

Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.

VICTAULIC.COM PL2016-GENERAL-C

11-11


Pipe Preparation Tools VE416FS GROOVING ROLLS *

Pipe Material Standard AGS Standard RW Copper Endseal

Lt. Wall Stainless Steel RX Lt. Wall Stainless Steel RWX AGS PVC/Aluminum

Part Number R902414003 R904416006 R908416012 RW01416016 RR02414006 RR08416008 RZ02414003 RZ04416006 RZ08416012 RX02414003 RX04416006 RX08416012 RWX1416016

Pipe Size Range inches | mm 2 – 3Z\x/50 – 90 4 – 6/100 – 150 8 – 12/200 – 300 14 – 16/350 – 400 2 – 6/50 – 150 8/200 2 – 3Z\x/50 – 90 4 – 6/100 – 150 8 – 12/200 – 300 2 – 3Z\x/50 – 90 4 – 6/100 – 150 8 – 12/200 – 300 14 – 16/350 – 400

RP02414003 RP04416006 RP08416012

2 – 3Z\x/50 – 90 4 – 6/100 – 150 8/200

Rental Per Month §

$166.50 (per set)*

Purchase List Price Each Set † $3440.50 2569.50 2569.50 3456.50 4744.50 4054.00 4054.00 2853.00 4054.00 3629.50 3629.50 3629.50 4592.50 3629.50 3629.50 3629.50

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability.

SECTION 10 PIPE PREPARATION TOOLS

§ ROLLS CAN ONLY BE RENTED WITH A TOOL RENTAL. Any rental tool requiring extra rolls, in addition to standard rolls supplied, such as RR (Copper), RX (Stainless Steel), RP (Plastic), RZ (EndSeal) will incur an additional rental charge per roll set. † Upper and lower rolls (1 of each per set) can be sold separately. Contact Victaulic. * Refer to How to Order at the end of this section.

Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.

11-12

VICTAULIC.COM PL2016-GENERAL-C


Pipe Preparation Tools VE416FSD/417FSD

VE416FSD/417FSD

VE416FSD/417FSD tools are completely self-contained units with integral gear motor, safety foot switch and power cord/plug. VE416FSD uses 110V power, while the VE417FSD has a 220V power source. VE416FSD/VE417FSD is supplied complete with 2 – 16” roll sets * (8 – 12” rolls are installed). It is equipped with a pipe stabilizer for 6 – 16” nominal pipe sizes to prevent pipe sway. VE416FSD is designed for occasional field grooving of AGS pipe. 2 – 12” Original Groove Rolls and 14 – 16” AGS Groove Rolls * For additional standard rolls and special rolls, see next page.

Tool Model VE416FSD – 110V

Part Number R000417FSD

Tool Weigth/ Shipping Weight Lbs 340/450

Rental Per Month $4207.00

Tool List Price $39122.00^

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. ^ For proper operation, a pipe stand is required. See Accessories for details.

Optional Rolls: Optional rolls are available for Schedule 5S and 10S stainless steel pipe, PVC and aluminum pipe, and type K, L, M and DWV copper tubing. Pipe Size (in | mm) / Schedule Tool Ratings — Maximum Pipe Size Capacity 2 Pipe Material Notes 50 Steel 2, 3 Stainless 2 4 VE416FSD/ Lt. Wall SS VE417FSD Aluminum 1, 6 PVC Plastic 6 40 Copper 5 Model

OGS 2½ 60

AGS

3 80

4 5 6 8 10 12 14 16 100 125 150 200 250 300 350 400 5 – 40 10 – STD STD Wall AGS 40S STD STD Wall RW AGS 5S – 10S 10S RWX 5 – 40 5 – STD 40 – 80 40 K, L, M and DWV

1. 6061-T4 or 6063-T4 Alloy must be used. 2. Use standard grooving rolls marked with the prefix R. 3. EndSeal™ grooving rolls marked with the prefix RZ are available. Contact Victaulic® for details. 4. Use grooving rolls marked with the prefix RX. 5. Use grooving rolls marked with the prefix RR. 6. Use grooving rolls marked with the prefix RP.

SECTION 10 PIPE PREPARATION TOOLS

Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.

VICTAULIC.COM PL2016-GENERAL-C

11-13


Pipe Preparation Tools VE416FSD/VE417FSD GROOVING ROLLS *

Pipe Material Standard OGS-200 Groove Profile AGS Standard RW Copper Endseal

Lt. Wall Stainless Steel RX Lt. Wall Stainless Steel RWX PVC/Aluminum

Part Number R902414003 R904416006 R908416012 R9S4416006

Pipe Size Range Inches | mm 2 – 3Z\x/50 – 90 4 – 6/100 – 150 8 – 12/200 – 300 4 – 6/100 – 150

RW01416016 RR02414006 RR08416008 RZ02414003 RZ04416006 RZ08416012 RX02414003 RX04416006 RX08416012 RWX1416016

14 – 16 2 – 6/50 – 150 8/200 2 – 3Z\x/50 – 90 4 – 6/100 – 150 8 – 12/200 – 300 2 – 3Z\x/50 – 90 4 – 6/100 – 150 8 – 12/200 – 300 14 – 16/350 - 400

RP02414003 RP04416006 RP08416012

2 – 3Z\x/50 – 90 4 – 6/100 – 150 8/200

Rental Per Month §

$166.50 (per set)*

Purchase List Price Each Set † $3440.50 2569.50 2569.50 1762.50 3456.50 4744.50 4054.00 4054.00 2853.00 4054.00 3629.50 3629.50 3629.50 4592.50 3629.50 3629.50 3629.50

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability.

SECTION 10 PIPE PREPARATION TOOLS

§ ROLLS CAN ONLY BE RENTED WITH A TOOL RENTAL. Any rental tool requiring extra rolls, in addition to standard rolls supplied, such as RR (Copper), RX (Stainless Steel), RP (Plastic), RZ (EndSeal) will incur an additional rental charge per roll set. † Upper and lower rolls (1 of each per set) can be sold separately. Contact Victaulic. * Refer to How to Order at the end of this section.

Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.

11-14

VICTAULIC.COM PL2016-GENERAL-C


Pipe Preparation Tools VE450FSD

VE450FSD

VE450FSD is a self-contained unit with two 220 volt, single phase 50/60 hz, 20 amp integral gear motors to handle heavier loads, safety foot switch and power cord/plug. VE450FSD is supplied complete with 4 – 12”/100 – 300 mm original groove roll sets and 14 – 24”/350 – 600 mm AGS groove roll sets.

Tool Model VE450FSD VE450FSD with VAPS 224 Pipe Stand (Save 10%)

Part Number R000450FSD R000450FSD & R000224PSO

Tool Weight/ Shipping Weight Lbs 825

Rental Per Month $4288.50

Tool List Price $60361.00

825

4872.50

62433.00

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

Optional Rolls: Optional rolls are available for 4 – 18”/100 – 450 mm lightwall stainless steel original groove; 14 – 24”/350 – 600 mm lightwall stainless steel AGS groove; and 4 – 12”/100 – 300 mm EndSeal (ES) groove. RP roll sets are also available for roll grooving aluminum and plastic. Note: Tool not available for rent. For Lease Purchase Pricing contact Victaulic. Pipe Size (in | mm) / Schedule

Tool Ratings — Maximum Pipe Size Capacity

OGS

AGS

4 5 6 8 10 12 14 16 18 14 16 18 20 22 24 Notes 100 125 150 200 250 300 350 400 450 350 400 450 500 550 600 5– Steel 3, 7 5 – 40 5 – STD STD Stainless 8 40S STD STD VE450FSD Lt. Wall SS 9 5S – 10S 10S RWX Aluminum 1, 6 5 – 40 STD PVC Plastic 6 40 – 80 40 Model

Pipe Material

1. 6061-T4 or 6063-T4 Alloy must be used. 3. EndSeal™ grooving rolls marked with the prefix RZ are available. Contact Victaulic® for details. 6. Use grooving rolls marked with the prefix RP. 7. Use standard grooving rolls marked with the prefix R for both OGS and AGS. 8. Use standard grooving rolls marked with the prefix R for OGS and RW for AGS. 9. Use grooving rolls marked with the prefix RX for OGS and RWX for AGS. (Special RWX Rolls are available for grooving true Sch. 10 (0.250 | 6.4 mm). VE450FSD GROOVING ROLLS *

Pipe Size Range inches | mm 4 – 6/100 – 150 8 – 12/200 – 300 14 – 24/350 – 600 4 – 6/100 – 150 8 – 12/200 – 300 14 – 16/350 – 400 18/450

Lt. Wall Stainless Steel RWX AGS

RWQX448024

14 – 24/350 – 600

PVC/Aluminum

RPQ1448006 RPQ1448012

4 – 6/100 – 150 8/200

Standard AGS Standard RW Lt. Wall Stainless Steel RX

Rental Per Month §

$166.50 (per set)*

Purchase List Price Each Set † $4534.50 5880.50 5909.00 10644.00 8618.50 8589.50 8723.00 11762.00 + +

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. § ROLLS CAN ONLY BE RENTED WITH A TOOL RENTAL. Any rental tool requiring extra rolls, in addition to standard rolls supplied, such as RR (Copper), RX (Stainless Steel), RP (Plastic), RZ (EndSeal) will incur an additional rental charge per roll set. † Upper and lower rolls (1 of each per set) can be sold separately. Contact Victaulic. * Refer to How to Order at the end of this section.

SECTION 10 PIPE PREPARATION TOOLS

Part Number R9Q1448006 R9Q1448012 RWQ2448024 RXQ1448006 RXQ1448012 RXQ1448016 RXQ1448020

Pipe Material

Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.

VICTAULIC.COM PL2016-GENERAL-C

11-15


Pipe Preparation Tools Vic-Easy Roll Grooving Tools – Shop Fabrication VE268

Vic-Easy Roll Grooving Tools – Shop Fabrication VE268 †

NOTE: All shop models shipped set for 220 power, unless specified otherwise. 3 phase power requires tool to be hard wired by a local certified electrician. Fully-motorized, semi-automatic, electro-hydraulic tool complete with safety guards, safety foot switch and power cord. The VE268 requires a 220/440V, 3 phase, 60 hertz power supply for operation and is equipped with a pipe stabilizer for 8 – 12” nominal pipe sizes to prevent pipe sway. The tool is shipped fully assembled for standard grooving (2 – 12” pipe) * (8 – 12” rolls are installed, unless otherwise specified). NOTE: Optional C\v and 1 – 1Z\x” grooving rolls available. Request RP-268 for power requirements or visit the Victaulic web site. † These tools are rated for 220 volt service. They cannot be used with 208 volt service. For individual amperage power requirements, refer to RP sheet supplied with tool. Each model may require different incoming power requirements. (If your service is 208 volts, a “Boost & Buck Transformer” may be required.)

Tool Model VE268 – 220V

Tool Weight/ Shipping Weight Lbs 735/766

Part Number R000268VE0

Rental Per Month $3526.50

Tool List Price $40224.00^

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. ^ For proper operation, a pipe stand is required. See Accessories for details.

Tool Ratings — Maximum Pipe Size Capacity Model

VE268

¾ Pipe Material Notes 20 Steel 2, 3 Stainless 2 Lt. Wall SS 4 Aluminum 1, 6 PVC Plastic 6, 14 Copper 5

Pipe Size (in | mm) / Schedule 1 25

1¼ 1½ 32 40

2 50

40

2½ 3 3½ 4 5 6 8 10 12 60 80 90 100 125 150 200 250 300 5 – 40 5 – 20 40S 5S – 10S 5 – 40 5 – 20 40 – 80 40 K, L, M and DWV

1. 6061-T4 or 6063-T4 Alloy must be used. 2. Use standard grooving rolls marked with the prefix R. 3. EndSeal™ grooving rolls marked with the prefix RZ are available. Contact Victaulic® for details. 4. Use grooving rolls marked with the prefix RX. 5. Use grooving rolls marked with the prefix RR.

SECTION 10 PIPE PREPARATION TOOLS

6. Use grooving rolls marked with the prefix RP.

Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.

11-16

VICTAULIC.COM PL2016-GENERAL-C


Pipe Preparation Tools VE268 GROOVING ROLLS *

Pipe Material

Standard

Copper Endseal

Stainless RX

PVC/Aluminum

Part Number R900268001 R900268002 R902272003 R904272006 R908272012 RR02272006 RR08272008 RZ02272003 RZ04272006 RZ08272012 RX75268001 RX01268002 RX02272003 RX04272006 RX08272012 RP02272003 RP04272L06 RP08272012

Pipe Size Range inches | mm C\v/20 1 – 1Z\x/25 – 40 2 – 3Z\x/50 – 80 4 – 6/100 – 150 8 – 12/200 – 300 2 – 6/50 – 150 8/200 2 – 3Z\x/50 – 90 4 – 6/100 – 150 8 – 12/200 – 300 C\v/20 1 – 1Z\x/25 – 40 2 – 3Z\x/50 – 80 4 – 6/100 – 150 8 – 12/200 – 300 2 – 3Z\x/5- – 90 4 – 6/100 – 150 8/200

Rental Per Month §

$166.50 (per set)*

Purchase List Price Each Set † $3222.00 2831.50 1915.00 1915.00 2072.00 2595.50 2855.50 3453.00 3537.00 3668.00 4629.00 4207.50 2960.50 3197.00 3197.00 1943.00 + +

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability. § ROLLS CAN ONLY BE RENTED WITH A TOOL RENTAL. Any rental tool requiring extra rolls, in addition to standard rolls supplied, such as RR (Copper), RX (Stainless Steel), RP (Plastic), RZ (EndSeal) will incur an additional rental charge per roll set. † Upper and lower rolls (1 of each per set) can be sold separately. Contact Victaulic. * Refer to How to Order at the end of this section.

SECTION 10 PIPE PREPARATION TOOLS

Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.

VICTAULIC.COM PL2016-GENERAL-C

11-17


Pipe Preparation Tools VE414MC

VE414MC †

NOTE: All shop models shipped set for 220 power, unless specified otherwise. 3 phase power requires tool to be hard wired by a local certified electrician. Fully-motorized, semi-automatic, hydraulic tool is shipped fully assembled with rolls for standard grooving (2 – 16” pipe *). Requires 220/440V, 3 phase, 60 Hz power supply. Safety guard, safety foot switch and instructions are included. Pipe stabilizer for pipe 8” and larger is included, to prevent pipe sway. 2 – 12” Original Groove Rolls 14 – 16” AGS Groove Rolls NOTE: New tools supplied with AGS rolls when 14 – 16” roll sets are specified. Request RP-414MC for power requirements or visit the Victaulic web site. † These tools are rated for 220 volt service. They cannot be used with 208 volt service. For individual amperage power requirements, refer to RP sheet supplied with tool. Each model may require different incoming power requirements. (If your service is 208 volts, a “Boost & Buck Transformer” may be required.) * For additional standard rolls and special rolls, see next page.

Tool Model VE414MC 220V

Part Number R000414MC1

Tool Weight/ Shipping Weight Lbs 735/830

Rental Per Month $4796.50

Tool List Price $62346.00^

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. ^ For proper operation, a pipe stand is required. See Accessories for details.

Optional Rolls: Optional rolls are available for Schedule 5S and 10S stainless steel pipe, PVC and aluminum pipe, and type K, L, M and DWV copper tubing. AGS roll sets for 14 – 16”/350 – 400 mm std. wall carbon steel pipe are now standard. Tools sold prior to October, 2005, are equipped with the original groove rolls that cannot be used to groove AGS profile. AGS roll sets can be ordered separately. Contact Victaulic for pricing and availability.

SECTION 10 PIPE PREPARATION TOOLS

For product applications requiring the original groove roll sets, please contact Victaulic for ordering information.

Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.

11-18

VICTAULIC.COM PL2016-GENERAL-C


Pipe Preparation Tools Pipe Size (in | mm) / Schedule Tool Ratings — Maximum Pipe Size Capacity Model

VE414MC

OGS

Pipe Material Notes Steel Stainless Lt. Wall SS Aluminum PVC Plastic Copper

3, 7 8 9 1, 6 6 5

2 50

40

2½ 60

AGS

3 80

4 5 6 100 125 150 5 – 40 40S 5S – 10S 5 – 40 40 – 80 K, L, M and DWV

8 200

10 250

12 300 10 – STD

14 16 350 400 STD Wall AGS STD Wall RW AGS 10S RWX

5 – STD 40

1. 6061-T4 or 6063-T4 Alloy must be used. 3. EndSeal™ grooving rolls marked with the prefix RZ are available. Contact Victaulic® for details. 5. Use grooving rolls marked with the prefix RR. 6. Use grooving rolls marked with the prefix RP. 7. Use standard grooving rolls marked with the prefix R for both OGS and AGS. 8. Use standard grooving rolls marked with the prefix R for OGS and RW for AGS. 9. Use grooving rolls marked with the prefix RX for OGS and RWX for AGS. (Special RWX Rolls are available for grooving true Sch. 10 (0.250 | 6.4 mm). VE414MC GROOVING ROLLS *

Pipe Material Standard AGS Standard RW Copper Endseal PVC Lt. Wall Stainless Steel RX Lt. Wall Stainless Steel RWX AGS PVC/Aluminum

Part Number R902414003 R904416006 R908416012 RW01416016 RR02414006 RR08416008 RZ02414003 RZ04416006 RZ08416012 RP02416003 RX02414003 RX04416006 RX08416012 RWX1416016

Pipe Size Range inches | mm 2 – 3Z\x/50 – 90 4 – 6/100 – 150 8 – 12/200 – 300 14 – 16/350 – 400 2 – 6/50 – 150 8/200 2 – 3Z\x/50 – 90 4 – 6/100 – 150 8 – 12/200 – 300 2 – 3Z\x/50 – 90 2 – 3Z\x/50 – 90 4 – 6/50 – 90 8 – 12/200 – 300 14 – 16/350 – 400

RP02414003 RP04416006 RP08416012

2 – 3Z\x/50 – 90 4 – 6/50 – 90 8/200

Rental Per Month §

$166.50 (per set)*

Purchase List Price Each Set † $3440.50 2569.50 2569.50 3456.50 4744.50 4054.00 4054.00 2853.00 4054.00 3629.50 3629.50 3629.50 3629.50 4592.50 3629.50 3629.50 3629.50

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability. § ROLLS CAN ONLY BE RENTED WITH A TOOL RENTAL. Any rental tool requiring extra rolls, in addition to standard rolls supplied, such as RR (Copper), RX (Stainless Steel), RP (Plastic), RZ (EndSeal) will incur an additional rental charge per roll set. † Upper and lower rolls (1 of each per set) can be sold separately. Contact Victaulic. * Refer to How to Order at the end of this section.

SECTION 10 PIPE PREPARATION TOOLS

VE460

Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.

VICTAULIC.COM PL2016-GENERAL-C

11-19


Pipe Preparation Tools VE460 †

NOTE: All shop models shipped set for 220 power, unless specified otherwise. 3 phase power requires tool to be hard wired by a local certified electrician. Base Tool – Fully-motorized, semi-automatic, hydraulic shop tool is shipped fully assembled with rolls for standard grooving (4 – 24”) .500 wall maximum. 8 – 12” rolls are installed. 4 – 12” Original Groove System Groove Rolls 14 – 24” AGS Groove Rolls Requires 220/440/3/60 power supply. All tools are shipped 220 as a standard. Operating instructions included. Request RP-460 for power requirements or visit the Victaulic web site. † These tools are rated for 220 volt service. They cannot be used with 208 volt service. For individual amperage power requirements, refer to RP sheet supplied with tool. Each model may require different incoming power requirements. (If your service is 208 volts, a “Boost and Buck Transformer” may be required.)

See kits below for components required to groove above 24”.

Tool Model

Roll Sets Included 4 – 6”/100 – 150 mm (R9Q1460006), 8 – 12”/200 – 300 mm R000460VE0 N/A N/A (R9Q1460012), 14 – 24”/350 – 600 mm (RWQ2460024) AGS Optional Kits for Grooving Above 24” ‡

TOOL ONLY

VE460

KIT 1

26 – 36”/ 650 – 900 mm

Railing and Platfrom Kit Quantity

Part Number

LIFTING POINT

LIFTING POINT

1500/1750

Call

List Price

$121663.50

VAPS224 (R000224PS0) OR VAPS1672 (R0001672PS)

N/A

Call

16476.00

R400460KIT

40 – 48”/1000 – 1200 mm 1* 2 ** (RWQ3460048) AGS (R550460KIT) (R551460PNT)

N/A

Call

18903.50

VAPS1672 (R0001672PS)

R500460KIT

50 – 60”/1250 – 1500 mm 1* 3 ** (RWQ3460060) AGS (R550460KIT) (R551460PNT)

N/A

Call

22373.50

VAPS1672 (R0001672PS)

FRONT

LIFTING POINT

Recommended Pipe Stand ^

VAPS236 (R000236PS0) OR VAPS1672 (R0001672PS)

LIFTING POINT

FRONT

KIT 3

50 – 60”/ 1250 – 1500 mm

Tool Weight/ Shipping Weight Rental Lbs Per Month

26 – 36”/650 – 900 mm 1 1 R260460KIT (RWQ3460038) AGS (R550460KIT) (R551460PNT)

KIT 2

40 – 48”/ 1000 – 1200 mm

Support Base (Quantity/ Part Number)

LIFTING POINT

LIFTING POINT

FRONT LIFTING POINT

LIFTING POINT

FRONT LIFTING POINT

LIFTING POINT

FRONT

Optional Rolls: Optional rolls are available for Schedule 5S and 10S stainless steel pipe, PVC, and aluminum pipe. NOTE: Items listed in shaded areas are non-cancellable and non-returnable. ^ For proper operation, a pipe stand is required. See Accessories for details. ‡ Optional Accessory Kits list REQUIRED COMPONENTS to groove up to the specified size. Kit components can be ordered individually or as a kit. * Railing and Platform Kit is required only if preceding kit has not been ordered.

SECTION 10 PIPE PREPARATION TOOLS

** Only one (1) Support Base is required if preceding kit has been ordered.

Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.

11-20

VICTAULIC.COM PL2016-GENERAL-C


Pipe Preparation Tools Pipe Size (in | mm) / Schedule Tool Ratings — Maximum Pipe Size Capacity Model

VE460

OGS

4 5 6 8 Pipe Material Notes 100 125 150 200 Steel 3, 8 5 – 80 Stainless 8 40S Lt. Wall SS 9 5S – 10S Aluminum 1, 6 5 – 40 PVC Plastic 6 40 – 80 40

10 12 250 300 5 – XS

14 350

16 400

18 450

20 500

22 550

24 600

STD 5S – 10S, TRUE 10

Pipe Size (in | mm) / Schedule Tool Ratings — Maximum Pipe Size Capacity Model VE460

AGS

14 16 18 20 Pipe Material Notes 350 400 450 500 Steel 3, 8 10 – XS Stainless 8 STD Lt. Wall SS 9 5S – 10S, TRUE 10

22 550

24 600

26 650

28 700

30 750

32 800

34 850

36 38 900 950 .375 – .500

40 42 48 50 60 1000 1050 1200 1250 1500

1. 6061-T4 or 6063-T4 Alloy must be used. 3. EndSeal™ grooving rolls marked with the prefix RZ are available. Contact Victaulic® for details. 6. Use grooving rolls marked with the prefix RP. 8. Use standard grooving rolls marked with the prefix R for OGS and RW for AGS. 9. Use grooving rolls marked with the prefix RX for OGS and RWX for AGS. (Special RWX Rolls are available for grooving true Sch. 10 (0.250 | 6.4 mm). NOTE: Maximum ratings are limited to pipe that does not exceed the yield strength of API-5L Grade “B”, ASTM Grade “B”, 150 Brinell Hardness Number (BHN) maximum. PIPE PREPARATION TOOLS VE460 GROOVING ROLLS *

Pipe Material Carbon Steel Standard Wall and Stainless Lt. Wall Stainless Steel RX OGS-200 Groove Profile Lt. Wall Stainless Steel RWX AGS PVC/Aluminum EndSeal Lt. Wall Stainless Steel RX OGS

Pipe Size Range inches | mm 4 – 6/100 – 150 8 – 12/200 – 300 14 – 24/350 – 600 AGS 4 – 6/100 – 150 8 – 12/200 – 300 8/200 14 – 18/350 – 450 AGS

Purchase List Price Each Set $4727.50 4562.00 4377.50 10204.50 9045.00 5554.00 9197.50

RPQ1460006 RPQ1460012 RZQ1460006 RZQ1460012 RXQ1460016 RXQ1460020 RXQ1460024

4 – 6/100 – 150 8 – 12/200 – 300 4 – 6/100 – 150 8 – 12/200 – 300 14 – 16/350 – 400 18/450 22 – 24/550 – 600

10457.00 9931.00 9259.00 7801.00 7032.50 10876.50 9130.50

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. NOTE: ROLLS CAN ONLY BE RENTED WITH A TOOL RENTAL. Contact Victaulic for details. Any rental tool requiring extra rolls, in addition to standard rolls supplied, such as RR (Copper), RX (Stainless Steel), RP (Plastic), RZ (EndSeal) will incur an additional rental charge per roll set. † Upper and lower rolls (1 of each per set) can be sold separately. Contact Victaulic. * Refer to How to Order at the end of this section.

SECTION 10 PIPE PREPARATION TOOLS

Part Number R9Q1460006 R9Q1460012 RWQ2460024 RXQ1460006 RXQ1460012 R9QS460008 RWQX460018

Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.

VICTAULIC.COM PL2016-GENERAL-C

11-21


Pipe Preparation Tools VE872

VE872

NOTE: All shop models shipped set for 220 power, unless specified otherwise. 3 phase power requires tool to be hard wired by a local certified electrician. Base Tool – Fully-motorized, semi-automatic, electrohydraulic tool is shipped complete with safety guards and safety foot switch. Support bases are required for roll grooving 26”/650 mm and larger pipe sizes. Each support is 16”/400 mm in height and corresponds with a range of allowable pipe sizes it can groove. Requires 220/440/3/60 power supply. Tool can also be supplied in various voltages. Contact Victaulic for details.

Tool Model VE872

Part Number R000872VE0

Tool Weight/ Shipping Weight Lbs 1900/2150

Rental Per Month +

^ For proper operation, a pipe stand is required. See Accessories for details. NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability.

Tool Ratings — Maximum Pipe Size Capacity Model

Pipe Size (in | mm) † / Schedule

8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 48 50 54 56 60 62 72 Pipe Material Note 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 950 1000 1050 1200 1250 1350 1400 1500 1550 1800 Carbon Steel

VE872 Carbon Steel

11

Sch. 40 .500

.375/9.5 mm to .500/12.7 mm .562/.625 wall Grade B Only

11. Physical properties shall be in accordance with API specification 5L, Grades B, X42, X46, X52, X56 or X60, download publication 25.09.For physical properties not listed contact Victaulic® for details.

SECTION 10 PIPE PREPARATION TOOLS

NOTE: Maximum ratings are limited to pipe that does not exceed the yield strength of API-5L Grade “B”, ASTM Grade “B”, 150 Brinell Hardness Number (BHN) maximum.

Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.

11-22

VICTAULIC.COM PL2016-GENERAL-C


Pipe Preparation Tools Victaulic Fabrication Cell

Victaulic Fabrication Cell

Includes hydraulic adjustable pipe stand and tracks, tool support, two adjustable positioner tables, and an assembly table. Also includes caster wheels and ball transfers. Grooving tools are offered with the package, but are not included in the price of the base package.

VICTAULIC FABRICATION CELL

Description Victaulic Fabrication Cell without Grooving Tool – Base Package

Part Number R001131KIT

List Price $64289.50

Part Number R000131414 R000131460

List Price $126634.00 185951.50

Part Number R101131ASY R200131ASY R102131ASY

List Price $18151.50 11578.00 13081.50

VICTAULIC FABRICATION CELL WITH GROOVING TOOL

Description Victaulic Fabrication Cell with VE414MC Roll Grooving Tool Victaulic Fabrication Cell with VE460 Roll Grooving Tool Description VAP131R – Pipe Stand with V Track VAP131T – Assembly Table VAP131F – Positioner

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

SECTION 10 PIPE PREPARATION TOOLS

VICTAULIC FABRICATION COMPONENTS SOLD SEPARATELY

Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.

VICTAULIC.COM PL2016-GENERAL-C

11-23


Pipe Preparation Tools Victaulic Fabrication Cell Accessories

Description V-Track Wheels V-Track 6-ft. Sections Ball Transfers Ball Transfer Support Friction Slide Friction Brake

Part Number NM05000010 R400131PNT NM28000002 R301131PNT R208131PNT R210131ASY

List Price $150.00 574.00 328.00 297.00 68.00 172.50

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

Vic-Easy Tool Accessories VAPS112 Pipe Stand

Vic-Easy Tool Accessories Victaulic Power Drive – VPD752

Power drive features safety foot switch and bi-directional speed chuck. Z\x horsepower, 15 amp motor operates on standard 120V power source. VPD753 for single phase, 220V power source also available. Contact Victaulic for pricing. Capacities: See appropriate tool. † Optional: Universal Drive Shaft.

Tool Model Victaulic Power Drive – VPD752 – 110V Victaulic Power Drive – VPD753 – 220V

Part Number R000752110 R000753220

Tool Weight/ Shipping Weight Lbs 140/165 140/165

Rental Per Month Call Call

Tool List Price $10561.00 10561.00

† Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Vic-Easy Tool Rating Data in publication 24.01.

VAPS112

Vic-Easy Adjustable Pipe Stands are portable and self-standing units. Turnstile design allows pipe to be spun around for grooving of both pipe ends without dismounting pipe from stand. Unique trough design allows for rotational and forward/traverse movement. They are designed for direct use with Vic-Easy roll grooving tools: VE272SFS, VE268, VE270FSD. Capacities: 1 – 12” IPS pipe † Load Rating: 1075 lbs Vertical Stroke: 14Z\x” for adjusting rod; 8Z\x” leg adjustment; 23” total Min. Pipe Height from Floor: 23” on 12” pipe; 21” on 1” pipe Handle Effort Required to Raise 1800 lbs Load: 50 lbs Max.

Tool Model VAPS 112

Part Number R000112PS0

Tool Weight/ Shipping Weight Lbs 190/220

Rental Per Month $932.50

Tool List Price $7620.00

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

SECTION 10 PIPE PREPARATION TOOLS

† Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Vic-Easy Tool Rating Data in publication 24.01.

Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.

11-24

VICTAULIC.COM PL2016-GENERAL-C


Pipe Preparation Tools VAPS224 Pipe Stand

VAPS224

Vic-Easy Adjustable Pipe Stands are portable and self-standing units that permit free pipe rotation and traversing on ball transfers. Turnstile design allows pipe to be spun around for grooving of both pipe ends without dismounting pipe from stand. They are designed for direct use with Vic-Easy roll grooving tools: VE416/FSD, VE414MC, VE436MC, VE460. Capacities: 2 – 24” IPS pipe † Load Rating: 1800 lbs Vertical Stroke: 21” Min. Pipe Height from Floor: 14” on 24” IPS pipe Max. Pipe Height from Floor: 39” on 2” IPS pipe Handle Effort Required to Raise 1800 lbs Load: 50 lbs Max.

Tool Model VAPS 224

Part Number R000224PS0

Tool Weight/ Shipping Weight Lbs 260/315

Rental Per Month $1086.00

Tool List Price $9965.50

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. † Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Vic-Easy Tool Rating Data in publication 24.01.

VAPS236 Pipe Stand

VAPS236

Vic-Easy Adjustable Pipe Stands are portable and self-standing units that permit free pipe rotation and traversing on ball transfers. They are designed for direct use with Vic-Easy roll grooving tools: VE436MC and VE460. Capacities: 26 – 36” pipe † Load Rating: 4200 lbs Vertical Stroke: 18” Min. Pipe Height from Floor: 12” on 36” pipe Max. Pipe Height from Floor: 28” on 26” pipe

Tool Model VAPS236

Part Number R000236PS0

Tool Weight/ Shipping Weight Lbs. 480

Rental Per Month Call

Tool List Price $51772.00

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. † Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Vic-Easy Tool Rating Data in publication 24.01.

SECTION 10 PIPE PREPARATION TOOLS

Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.

VICTAULIC.COM PL2016-GENERAL-C

11-25


Pipe Preparation Tools VAPS1672 Pipe Stand

VAPS1672

Vic-Easy Adjustable Pipe Stands are portable and self-standing units that permit free pipe rotation and traversing on ball transfers. They are designed for direct use with Vic-Easy roll grooving tools: VE436MC and VE460. Capacities: 16 – 72” pipe † Load Rating: 10000 lbs Vertical Stroke: 17” Min. Pipe Height from Floor: 16” on 72” pipe Max. Pipe Height from Floor: 28” on 16” pipe

Tool Model VAPS1672

Part Number R0001672PS

Tool Weight/ Shipping Weight Lbs 480

Rental Per Month Call

Tool List Price $52515.00

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. † Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Vic-Easy Tool Rating Data in publication 24.01.

VE436MC Slide Conversion Kit

VE436MC Quick Change Slide Conversion KIt

The VE436MC Quick Change Slide Conversion Kit includes an upper shaft and slide held in place by a detent pin for improved efficiency. The kit also includes 4 – 12”/100 – 300 mm standard groove upper rolls, 14 – 24”/350 – 600 mm AGS groove upper rolls, pipe size, pipe rotation, guard setting labels, and guard setting pads (standard and AGS). NOTE: Upper rolls only are included with the kit. Lower rolls can be purchased separately. Retain original slide, shaft, set screws and roll grooving assembly for future use. Conversion Kit VE436MC Quick Change Slide Conversion Kit

Part Number

Kit Weight Lbs

Kit List Price

R150436KIT

106

$16674.00

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

SECTION 10 PIPE PREPARATION TOOLS

NOTE: The VE436MC tool has a maximum wall thickness range of up to .375”/9.5 mm

Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.

11-26

VICTAULIC.COM PL2016-GENERAL-C


Pipe Preparation Tools Cut Grooving Tools VG28GD

Cut Grooving Tools Notice: When ordering a cut grooving tool, please specify standard steel or ductile iron (rigid or flexible).

VG28GD (Gear Drive) *

Includes tool set for grooving 4 – 6” standard steel pipe, crate, operating instructions, tool bit removal kit, 10” extension bar, depth stop adjustment tools, and one extra 2 – 3Z\x” and 8” standard groove steel pipe tool bits. Capacities: 2 – 8” steel (and other IPS) and 3 – 6” cast and ductile pipe (Additional bits required)

Tool Model VG28GD (Gear Drive)

Part Number R000281AVG

Tool Weight/ Shipping Weight Lbs 37/56

Rental Per Month $1054.50

Tool List Price $18605.00

* NOTE: Victaulic Cut Grooving Tools require an external power source (see Power Mule in Pipe Preparation Tool Accessories). NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

Tool Ratings — Maximum Pipe Size Capacity Model VG28GD

Pipe Size (in | mm) / Schedule

Note Pipe Material 15, 16 15 15 15

2 50

2½ 65

Steel Stainless Aluminum Ductile Iron

3 80

3½ 4 5 90 100 125 40 – 80 40 – 80 40 – 80 Class 53 Min.

6 150

8 200 40

15. Special knives and stops may be required. 16. Maximum steel pipe wall thickness up to 0.437”/11.1 mm. VG28GD PARTS

Type Pipe

Steel (Aluminum Stainless and other IPS Metallic)

AWWA # Cast and Ductile Iron Stainless Steel

Type Groove Standard

EndSeal Standard (Rigid) Flexible SS

Pipe Size/ Tool Bit Marking inches | mm 2 – 3Z\x/50 – 90 Std. 4 – 6/100 – 150 Std. 8/200 Std. 2 – 3Z\x/50 – 90 ES 4 – 6/100 – 150 ES 8/200 ES 3 – 6/80 – 150 CIR * 3 – 6/80 – 150 CIF 2 – 3Z\x/50 – 90 4 – 6/100 – 150 8/200

Part Numbers RK02280003 RK04280006 RK08280008 RK02280Z03 RK04280Z06 RK08280Z08 RK03280G06 RK03280E06 RK02280S03 RK04280S06 RK08280S08

Purchase Price Each $363.00 363.00 363.00 363.00 363.00 363.00 518.00 462.00 363.00 363.00 363.00

# Carbide Tipped Tool Bits supplied for grooving cast and ductile pipe have one edge not suitable for resharpening. NOTE: Items listed in shaded areas are non-cancellable and non-returnable. * Requires Special Cast Iron Rigid Pipe Stops (Part No. R-016-280-AVG [2 required]). NOTE: Special urethane covered Idler Roll (Part No. R-033-281-AVG) recommended for grooving glass lined pipe.

SECTION 10 PIPE PREPARATION TOOLS

Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.

VICTAULIC.COM PL2016-GENERAL-C

11-27


Pipe Preparation Tools VG28GD-ABR

VG28GD-ABR for lined piping systems

The standard VG28GD tool can be equipped to provide grooving for abrasion. Parts for cut grooving for abrasive services are found in the parts required for abrasive systems table. For details for abrasion grooving please refer to publication 25.03. The VG28GD tool is required for use with VG28GD-ABR spare parts. These parts must be ordered separately for abrasive grooving services. Capacities: 2 – 8”/50 – 200 mm carbon steel. Tool Ratings — Maximum Pipe Size Capacity Pipe Model Material Note VG824-ABR 15 Steel

Pipe Size (in | mm) / Schedule 8 200

10 250

12 300

14 350

16 18 400 450 40 – XS

20 500

22 550

24 600

15. Special knives and stops may be required. PARTS REQUIRED FOR ABRASIVE SYSTEMS

Type Pipe

Part Knives/Tool Bit

Steel Pipe

Rubber Lining

Stop Spacers †

Pipe Size/ Tool Bit Marking inches | mm 2 – 3Z\x/50 – 90 4 – 6/100 – 150 8/200 2 – 8/50 – 200

Part Number RK02280M03 RK04285M06 RK08285M08 R001285MCH

Price Each $404.00 610.00 560.00 562.50

† Two Required

Tool Bit Arm Pipe Stop

VDG26GD

VDG26GD (Gear Drive)* for double groove systems

Includes tool set for grooving 6” double groove standard carbon steel pipe. Also includes crate, operation instructions, tool bits, tool bit removal kit, 10” extension bar and depth stop adjusting tools. Capacities: 6” carbon steel NOTE: For details on grooving the Style 808 Double Groove Coupling, please refer to publication 25.04.

Tool Model

Part Number R000284AVG

VDG26GD **

Tool Weight/ Shipping Weight Lbs 37/56

Rental Per Month $2685.00

Tool List Price $21072.00

* NOTE: Victaulic Cut Grooving Tools require an external power source (see Power Mule in Pipe Preparation Tool Accessories). ** The VDG26GD is used to prepare pipe ends for Victaulic Style 808 Double Groove Couplings only.

Tool Ratings — Maximum Pipe Size Capacity Model VDG26GD

Note 15

Pipe Material Steel

Pipe Size (in | mm) / Schedule 2 50

2½ 65

3 80

3½ 90

4 100

5 125

6 150 40 – 80

8 200

SECTION 10 PIPE PREPARATION TOOLS

15. Special knives and stops may be required. VDG26GD PARTS

Type Pipe Carbon Steel

Knife/Bit A B

Pipe Size/ Tool Bit Marking inches | mm 6/150 6/150

Part Number RK04284A06 RK04284B06

Price Each $608.50 608.50

Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.

11-28

VICTAULIC.COM PL2016-GENERAL-C


Pipe Preparation Tools VG824

VG824 *

Includes tool set for grooving 8 – 12” standard steel pipe, crate, operating instructions, tool bit removal kit, wrench and one extra 8 – 24” standard groove steel pipe tool bit. Capacities: 8 – 24” steel (and other IPS) and 8 – 24” cast and ductile pipe (Additional bits required) Note: Tools bits and stops for D.I. are optional. See below.

Tool Model

Part Number R000824AVG

VG824

Tool Weight/ Shipping Weight Lbs 82/126

Rental Per Month $2425.00

Tool List Price $31551.00

* NOTE: Victaulic Cut Grooving Tools require an external power source (see Power Mule in Pipe Preparation Tool Accessories). NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

Tool Ratings — Maximum Pipe Size Capacity Pipe Model Material Note Steel Stainless VG824 15 Aluminum Ductile Iron

Pipe Size (in | mm) / Schedule 8 200

10 12 14 16 18 20 22 250 300 350 400 450 500 550 40 – 80 30 – STD 30 – STD 30 – STD Class 53 Min.

24 600

15. Special knives and stops may be required. VG824 PARTS

Type Pipe

Type Groove

Tool Bit Pipe/Size Marking inches | mm

Steel (and other IPS Metallic)

Std.

EndSeal

Std. (Rigid) AWWA # Cast and Ductile Iron

Flexible

Stainless Steel

SS

Part Numbers

8 – 24/ RK08824024 200 – 600 Std. 8 – 12/ 200 – 300 ES 8/200 CIR

RK08824Z12 RK08824G08

Pipe Stop Pipe/Size Marking Purchase inches | Price Each mm 8 – 12” Std. $334.50 14 – 24” Std. 8 – 12” 386.00 Std. 468.00 8/200 CI 10 – 468.00 12/250 – 300 CI 468.00 14/350 CI 16 – 468.00 24/400 – 600 CI

Part Numbers

Purchase Price Each

R424824AVG

$891.00

R024824AVG

891.00

R424824AVG

891.00

R524824AVG

891.00

R024824AVG

891.00

R224824AVG

933.50

R324824AVG

785.50

10 – 12/ 250 – 300 CIR

RK10824G12

14/350 CIR

RK14824G14

16 – 24/ 400 – 600 CIR

RK16824G24

8 – 12/ 200 – 300 CIF

RK08824E12

468.00

8/200 CI

R524824AVG

891.00

14 – 24/ 250 – 600 CIF

RK14824E24

468.00

10 – 12/250 – 300 CI

R024824AVG

891.00

8 – 24/ 200 – 600

RK08824X24

972.00

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. NOTE: Special urethane covered Idler Roll (Part No. R-201-824-AVG) recommended for grooving glass lined pipe. Center adjustable stop (Part. No. R-025-824-AVG) available.

SECTION 10 PIPE PREPARATION TOOLS

# Carbide Tipped Tool Bits supplied for grooving cast and ductile pipe have one edge not suitable for resharpening.

Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.

VICTAULIC.COM PL2016-GENERAL-C

11-29


Pipe Preparation Tools VG824-A30

VG824-ABR (Abrasion Only) for lined piping systems

The standard VG824 tool can be equipped to groove ABR (machined for rubber lining – abrasion only) pipe. Special knives (tool bits), pipe end stop spacers, stop guide and pipe stop screw must be purchased separately. For details for abrasion grooving refer to publication 25.03. Required to convert a VG824 to groove abrasion only machined rubber lined pipe special parts. The VG824 tool is required for use with VG824-ABR spare parts. These parts must be ordered separately for abrasive grooving services. Tool Ratings — Maximum Pipe Size Capacity Pipe Model Material Note VG824-ABR 15 Steel

Pipe Size (in | mm) / Schedule 8 200

10 250

12 300

14 350

16 18 400 450 40 – XS

20 500

22 550

24 600

15. Special knives and stops may be required. Pipe

VG824ABR PARTS

Item #

8 – 12" Tool Bit

14 – 16" Tool Bit

18-24 AB R AS .

B 8-12 MR L

8-24 S T D

Rubber Lining

18 – 24" Tool Bit

1 2 3 4 5 6 7

Description 8 – 12”/ 200 – 300 mm Tool Bit 14 – 16”/ 350 – 400 mm Tool Bit 18 – 24”/ 450 – 600 mm Tool Bit 8 – 12”/ 200 – 300 mm Spacer † 14 – 24”/ 350 – 600 mm Spacer † Stop Guide Guide Screw

Part Number

No. Required

Price Each

RK08825M12

1

Call

RK08824024

1

$334.50

RK18825M24

1

305.50

R024825MCH

2

328.00

R025825MCH

2

264.00

R026825MCH R226824AVG

1 1

1905.50 1905.50

† Two Required

SECTION 10 PIPE PREPARATION TOOLS

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.

11-30

VICTAULIC.COM PL2016-GENERAL-C


Pipe Preparation Tools VG824DG

VG824DG for double groove systems

Includes tool set to groove 8 – 12” double groove on carbon steel pipe. Also includes crate, operating instructions, tool bits, tool bit removal kit and depth stop adjusting tools. Note: The VG824DG tool is used to fabricate pipe for the Victaulic Style 808 Double Groove Coupling. Refer to publication 25.04 for grooving specifications. Capacities: 8 – 12” carbon steel

Tool Model

Part Number R000827AVG

VG824DG

Tool Weight/ Shipping Weight Lbs 82/126

Rental Per Month $6663.00

Tool List Price $52301.00

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

Pipe

Pipe Stop

Tool Ratings — Maximum Pipe Size Capacity Pipe Model Material Note VG824DG 15 Steel

Pipe Size (in | mm) / Schedule 8 200

10 12 250 300 40 – 80

14 350

16 400

18 450

20 500

22 550

24 600

15. Special knives and stops may be required. Tool Bit Arm

VG824DG PARTS

Description

Type Groove

Knives/Tool Bits

Double Groove

Pipe Size/ Tool Bit Marking inches | mm 8 – 12/ 200 – 300 mm A 8 – 12/ 200 – 300 mm B

Part Number

Price Each

RK08824024

$334.50

RK08824024

334.50

Part Number

Price Per Set of 2

R076827HTR

Call

R074827HTR

Call

VG824DG PARTS REQUIRED FOR ES GROOVES

Description

Type Groove

Center Stop

Double Groove

Stops †

Double Groove

Pipe Size/ Tool Bit Marking inches | mm 8 – 12/ 200 – 300 mm 8 – 12/ 200 – 300 mm

† Two Required

SECTION 10 PIPE PREPARATION TOOLS

Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.

VICTAULIC.COM PL2016-GENERAL-C

11-31


Pipe Preparation Tools VG828

VG828

Includes tool set for grooving 14”/350mm standard carbon steel pipe, shipping crate, operating instructions, tool bit removal kit, depth adjusting tools and one extra tool bit. Note: The VG828 tool has been designed for cut grooving .500”/12.7 mm or heavier carbon steel pipe 14 – 24”/350 – 600 mm. Designed for AGS systems only.

Tool Model

Part Number R000828AVG

VG828 Tool Ratings — Maximum Pipe Size Capacity Pipe

Center Stop

Model VG828

Note 15

Tool Weight/ Shipping Weight Lbs 82/126

Pipe Material Steel

Rental Per Month $4833.50

Tool List Price $37941.00

Pipe Size (in | mm) / Schedule 14 350

16 400

18 20 450 500 .500-.750

22 550

24 600

15. Special knives and stops may be required. Tool Bit Arm

VG828 PARTS

Tool Bit/Knife Pipe/Size Marking inches | mm

Pipe Stop

Part Number

Purchase Price Each

Type Pipe

Type Groove

Steel

AGS

14 – 24/ 350 – 600

RK14828W24

$894.00

Steel

AGS

Pipe/Size Marking inches | mm 14 – 24/ 350 – 600 Front † 8 – 24/ 200 – 600 Center

Part Number

Purchase Price Each

R024824AVG

$891.00

R025824AVG

1813.50

SECTION 10 PIPE PREPARATION TOOLS

† Two Required

Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.

11-32

VICTAULIC.COM PL2016-GENERAL-C


Pipe Preparation Tools VG412

VG412 Orbital Grooving Tool

Includes riser blocks and grooving heads for cut grooving 4 – 12” ductile iron rigid groove. Power drive supplied requires 120 volt, 11.5 amp electrical supply. Stand included at no extra charge. Capacities: 4 – 12” ductile iron pipe NOTE: Specifically designed for field closure pieces. Not suitable for production grooving. Note: Tools bits and stops for D.I. are optional. See below.

Tool Model VG412 Orbital Grooving Tool Optional flexible spacer blocks: 4 – 6” /100 – 150 mm 8” /200 mm 10 – 12” /250 – 300 mm

Part Number R000412AVG

Tool Weight/ Shipping Weight Lbs 270/365

Rental Per Month $2684.00

List Price $52426.50

N220412667

351.00

N220412668 N220412669

– –

– –

375.50 402.00

Part Numbers N220412680 N220412568 N220412679 N220412569 N275412055

Purchase Price Each $378.50 378.50 378.50 378.50 203.50

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

Tool Ratings — Maximum Pipe Size Capacity Pipe Material Steel Ductile Iron

Model VG412

Pipe Size (in | mm) / Schedule 4 100

4½ 120

5 125

6 8 150 200 40 – 80 Class 53 Min.

10 250

12 300

VG412 PARTS

Type Pipe

AWWA Cast and Ductile Iron #

Pipe Size Knife Tool Bit Marking Style inches | mm Straight 4 – 6/100 – 150 Angled 4 – 6/100 – 150 Straight 8 – 12/200 – 300 Angled 8 – 12/200 – 300 Solid Cut-Off Blade

# Carbide Tipped Tool Bits supplied for grooving cast and ductile pipe have one edge not suitable for resharpening.

SECTION 10 PIPE PREPARATION TOOLS

Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.

VICTAULIC.COM PL2016-GENERAL-C

11-33


Pipe Preparation Tools VG

Vic-Groovers are designed for cut grooving a single size on standard size steel pipe. Vic-Groovers are supplied with an extra tool bit and ratchet handle. 2” and larger tools include a power yoke. NOTE: Vic-Groovers not recommended for use with a hand-held power drive. Pipe Size inches | mm C\v/20 1/25 1Z\v/32 1Z\x/40 2/50 2Z\x/65 3/80 3Z\x/90 4/100 5/125 6/150 8/200

Outside Diameter inches 1.050 1.315 1.660 1.900 2.375 2.875 3.500 4.000 4.500 5.563 6.625 8.625

Standard or “ES” Tool Complete w/Yoke and Extra Tool Bit * VG Tool Part Number Weight Each Lbs Standard * ES Each 11.0 R0000030VG – $1612.00 11.0 R0000040VG – 1612.00 12.0 R0000050VG – 1612.00 12.0 R0000060VG – 2236.50 12.0 R0000080VG R00E0080VG 2236.50 16.0 R0000100VG R00E0100VG 2104.00 16.0 R0000120VG R00E0120VG 2104.00 18.0 R0000140VG – 2422.00 18.0 R0000160VG R00E0160VG 2422.00 25.0 R0000200VG – 2768.00 25.0 R0000240VG R00E0240VG 2768.00 45.0 R0000320VG R00E0320VG 4004.50

* Tools for PVC and Stainless Steel add $721.00 to the standard tool price.

Size inches | mm C\v/20 1/25 1Z\v/32 1Z\x/40 2/50 2Z\x/65 3/80 3Z\x/90 4/100 5/125 6/150 8/200

Standard Part Number Part Number R0080030VG – R0080030VG – R0080030VG – R0080030VG – R0080030VG R0640080VG R0080030VG R0640080VG R0080030VG R0640080VG R0080140VG – R0080140VG R0640160VG R0080200VG – R0080200VG R0640240VG R0300320VG R0640320VG

Standard Price Each $212.50 212.50 212.50 212.50 212.50 212.50 212.50 212.50 212.50 263.00 263.00 90.00

Price Each – – – – $270.50 270.50 270.50 + 258.00 + 331.50 266.50

SECTION 10 PIPE PREPARATION TOOLS

* Tool bits for PVC and Stainless Steel add $721.00 to the standard tool bit price.

Size inches | mm 3/80 3/80 4/100 4/100 6/150 6/150 8/200 8/200 Size inches | mm 3/80 4/100 6/150 8/200

Style Rigid Flexible Rigid Flexible Rigid Flexible Rigid Flexible

VG Tool for Cast Pipe (Gray and Ductile) OD Weight Part Number 3.960 20.0 R00R015CVG 3.960 20.0 R00F015CVG 4.800 26.0 R00R019CVG 4.800 26.0 R00F019CVG 6.900 27.0 R00R027CVG 6.900 27.0 R00F027CVG 9.050 40.0 R00R036CVG 9.050 40.0 R00F036CVG

Style Rigid/Flexible Rigid/Flexible Rigid/Flexible Rigid/Flexible

Extra Knife for CI Part Number R008015CVG R008015CVG R008015CVG R030036CVG

Price $2768.00 2768.00 2768.00 2768.00 2848.50 2848.50 5740.50 5740.50

Price $792.00 792.00 792.00 792.00

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.

11-34

VICTAULIC.COM PL2016-GENERAL-C


Pipe Preparation Tools Tool Ratings — Maximum Pipe Size Capacity Model

VG

Pipe Material Steel Stainless Aluminum1 PVC Plastic Ductile Iron

Pipe Size (in | mm) / Schedule ¾ 20

1 25

1¼ 32

1½ 40

2 50

2½ 3 60 80 40 – 80 40 – 80 40 – 80 40 – 80

3½ 4 5 90 100 125

Cl. 53

6 150

8 200

Class 53 Min.

Pipe Preparation Tool Accessories Power Mule

SECTION 10 PIPE PREPARATION TOOLS

Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.

VICTAULIC.COM PL2016-GENERAL-C

11-35


Pipe Preparation Tools Pipe Preparation Tool Accessories Power Mule (External Power Source)

Electrical motor, gear driven, 2 hp power source for all Victaulic cut grooving tools with 1” drive connection, integral safety foot switch and reversible motor (requires 115/1/60-20 amp circuit*). Capacities: Victaulic grooving tools as noted. * 220V optional

Tool Model Power Mule (External Power Source)

Part Number R200700MUL

Tool Weight/ Shipping Weight Lbs 190/205

Rental Per Month $1151.00

Tool List Price $16077.50

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

PT-100-A Go/No-Go Pipe Tape PT-102 AGS Go/No-Go Pipe Tape

PT-100-A Go/ No-Go Grooved Pipe Diameter Tape

Pocket-sized steel tapes are available for taking circumferential measurements on pipe sizes C\v – 24”. This diameter tape contains Go/No-Go markings on one side for use with ANSI B36.19 and many ISO-4200 pipe sizes, and diameter markings to 100th of an inch on the other side. Tapes are notched on the lead end to allow proper overlap within the groove for more accurate measurement. Tool Model PT-100-A/PT-101 Go/No-Go Grooved Pipe Diameter Tape Each Box of 6

Part Number RW75-100-MCH RW75-100-KIT

Purchase Price $74.50 433.50

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

NOTICE • Tape contains Go/No-Go markings on one side for use with C\v – 24” pipe in ANSI B36.19 and many ISO-4200 sizes and is marked in 1/100th of an inch increments on the other side. • The Go/No-Go side can be used to check cut or roll grooved pipe conformance to Victaulic original and Machined for Rubber Lining (MRL) (C\v – 12”) and Advanced Groove System (AGS) (14 – 24”) groove diameter specifications. • Tapes are notched on the lead end to allow proper overlap within the groove for more accurate measurement. • The Go/No-Go side of the tape is not intended for use on sizes 76.1; 139.7; 165.1; 165.2; 216.3; 267.4; and 318.5 mm steel or stainless steel pipe sizes. For cast or ductile iron pipe sizes (up to 20”), copper tube sizes, and the steel and stainless steel pipe sizes listed above, use the side of the tape marked in 0.01” increments.

SECTION 10 PIPE PREPARATION TOOLS

• The Go/No-Go pipe tape is a quick reference guide only. To ensure proper grooving dimensions, always refer to the I-100 Victaulic Field Installation Handbook or to the latest groove specifications ­publications located on victaulic.com.

Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.

11-36

VICTAULIC.COM PL2016-GENERAL-C


Pipe Preparation Tools PT-102 AGS Go/ No-Go Grooved Pipe Diameter Tape

Go/No-Go pocket-sized steel tapes are available for taking circumferential measurements on pipe sizes 8 – 72”/200 – 1800 mm. Tool Model PT-102 AGS Go/No-Go Grooved Pipe Diameter Tape

Part Number RW00102ASY

Purchase Price $114.00

NOTICE • Tape contains Go/No-Go markings on one side for use with Original Groove System sizes 8 – 12”/200 – 300 mm pipe and Advanced Groove System sizes 14 – 72”/300 – 1800 mm pipe in ANSI B36.10/B36.19 and many ISO-4200 sizes. In addition, the PT102 contains markings in 0.02”/0.5 mm increments on the opposite side. • The opposite side of the diameter tape can be used to check Victaulic original groove specifications in 14 – 42”/200 – 1050 mm pipe sized, including China pipe sizes and JIS specifications 8 – 12”/200 – 300 mm pipe sizes. • The Go/No-Go pipe tape is a quick reference guide only, it is not a replacement for a calibrated diameter measuring instrument. To ensure proper grooving dimensions, always refer to the I-PT102 Victaulic Go/No-Go Pipe Diameter Tape Instructions Manual or to the latest groove specifications publications located on victaulic.com.

Tool Carry Bag

Heavy duty tool carry bag for transporting Vic-Easy Roll Grooving Tools, grooving rolls, and other tools. Carry bag can accommodate up to 50 lbs.

Tool Model Tool Carry Bag

Part Number NM15000002

Tool Weight/ Shipping Weight Lbs 4/6

Tool List Price $96.50

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

Swing Handle Wrench

Swing Handle Wrench

SWING HANDLE WRENCH

Size ZZ\zn” and M\,” Sockets for C\,” and Z\x” Hvy Hex Nuts M\,” and 1Z\zn” Sockets for Z\x” and B\,” Hvy Hex Nuts

Part Number

Purchase List Price Each $91.50 96.50

P000000001 P000000002

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. # Tool discount applies.

Size Reference Chart Coupling Size Inches

1 - 1Z\zn

Hex Nut Size C\, Std. Z\x Std. C\, Hvy. Z\x Hvy. B\, Hvy.

Style 72 – – 1Z\x – 2 2Z\x – 4 2Z\x – 4

Style 75 – – 1Z\x – 2 3–4 5–6

Style 77 – – C\v – 1 1Z\v – 3 3Z\x – 4

Style 005 FireLock † 1Z\v – 4 5–6 – – –

† Size 8” Style 005 FireLock coupling requires a standard ZB\zn” socket wrench with handle of sufficient length for correct installation. See installation instructions. IMPORTANT: These Swing Handle Wrench handle lengths are not sufficient for installating Style 07 Zero-Flex couplings.

Vic-Adjustable Cut Grooving Tools for PVC Plastic Pipe VPG26

SECTION 10 PIPE PREPARATION TOOLS

Socket Size >\zn C\v ZZ\zn M\.

Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.

VICTAULIC.COM PL2016-GENERAL-C

11-37


Pipe Preparation Tools Vic-Adjustable Cut Grooving Tools for PVC Plastic Pipe VPG26

Includes Tool with self-contained grooving motor (115/60) and tool bit for Schedule 40 – 80 PVC, crate, operating instructions and tool bit chuck wrench. Capacities: 2 – 6” Schedule 40 – 80 PVC and similar plastic pipe only.

Tool Model VPG26 Cut Grooving Tool Extra tool bits for 2 – 3Z\x” / 50 – 90 mm standard radius cut grooving Extra tool bits for 4 – 6” / 100 – 150 mm standard radius cut grooving

Part Number R000283VPG

Tool Weight/ Shipping Weight Lbs 41/46

Rental Per Month $1383.00

List Price $20091.50

R045283VPG

405.00

R019283MAC

412.00

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

Tool Ratings — Maximum Pipe Size Capacity Model

Pipe Material

VPG26

PVC Plastic

Pipe Size (in | mm) / Schedule 2 50

2½ 60

3 80

3½ 4 90 100 40 – 80

5 125

6 150

VPG824

VPG824

Includes Tool with self-contained grooving motor (115/50) and tool bit for Schedule 40 – 80 PVC, crate, operating instructions, and tool bit chuck wrench. Capacities: 8 – 16” Schedule 40 – 80 PVC and similar plastic pipe only

Tool Model VPG824 Cut Grooving Tool Extra tool bits for 8”/200 mm standard plastic radius cut grooving Extra tool bits for 10 – 16”/250 – 400 mm standard plastic radius cut grooving

Part Number R000826VPG

Tool Weight/ Shipping Weight Lbs 47/53

Rental Per Month $1907.50

List Price $28578.00

R025826MAC

755.50

R023826MAC

488.00

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

Tool Ratings — Maximum Pipe Size Capacity Model

Pipe Material

VPG824

PVC Plastic

Pipe Size (in | mm) / Schedule 8 200

10 250

12 14 300 350 40 – 80

16 400

SECTION 10 PIPE PREPARATION TOOLS

Hole Cutting Tools VHCT900

Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.

11-38

VICTAULIC.COM PL2016-GENERAL-C


Pipe Preparation Tools Hole Cutting Tools VHCT900

Includes three-piece hole cutting tool (Base, drill motor and feed assembly), arbor assembly, coupon remover, 2 pilot drills with coupon retaining springs and operating instructions. Requires grounded 120/1/60 – 10 amp electrical supply. (220/1/60 – 10 amp no cost option) Capacities: 1 – 3Z\x” holes for Z\x – 3” Mechanical-T, Strapless Outlet connections.

Tool Model VHCT900 – 110V

Part Number R000900HCT

Tool Weight/ Shipping Weight Lbs 36/61

Rental Per Month $948.50

Tool List Price $10771.00

The 1” Arbor is optional. Hole saw blades available from Victaulic. See accessories below. NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

HCT908

HCT908

The HCT908 Hole Cutting Tool is a one-piece tool designed to cut holes up to 4Z\x” carbon and stainless steel pipe. This allows for use of Mechanical-T, Strapless Outlet, Thermometer Outlet, and Style 922 Outlet Tee. The speed is variable and requires 110 volt power supply to operate. Capacities: 1 – 4Z\x” holes for Z\x – 4” Mechanical-T, Strapless Outlet connections.

Tool Model HCT908

Part Number R000908HCT

Tool Weight/ Shipping Weight Lbs 35/48

Rental Per Month $802.50

Tool List Price $4804.50

The 1” Arbor is optional. Hole saw blades available from Victaulic. See accessories below. NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

Accessories

Accessories

Part Number N-M18-000-011 N-M18-000-016 N-M18-000-021 N-M18-000-026 N-M18-000-031 N-M18-000-036 N-M18-000-037 N-M18-000-040 N-M18-000-047 N-M18-000-050

Purchase List Price Each $123.50 123.50 123.50 123.50 167.50 167.50 167.50 167.50 167.50 351.00

Part Name Arbor (Mandrel) Arbor (1”/ 25.4 mm saw only) Coupon Retaining Pilot Drill Chuck Key Assembly Levels Coupon Remover Assembly Long Chain – For Strapless Outlet *

Part Number R-400-900-HCT R-450-900-HCT R-402-900-HCT R-314-900-HCT N-M14-000-006 R-050-900-HCT R-170-900-HCT

Purchase List Price $238.00 238.00 97.50 126.00 26.50 42.50 1527.50

* For use with VHCT900 to accommodate pipe sizes greater than 610.0 mm. NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

SECTION 10 PIPE PREPARATION TOOLS

Saw Diameter inches | mm 1/25.4 1Z\v/31.8 1Z\x/38.1 1C\v/44.5 2/50.8 2C\,/60.33 2Z\x/63.5 2C\v/69.9 3Z\x/88.9 4Z\x/114.3

Vic-Tap II Hot Tap

Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.

VICTAULIC.COM PL2016-GENERAL-C

11-39


Pipe Preparation Tools Vic-Tap II

* Parts A and B are designed for use with Vic-Tap II Mechanical-T units; (Part C) for tapping into systems under pressure up to 500 psi. Part “A” Includes drill guide base with extended shaft, arbor, pilot drill, 2C\,” hole saw, packing gland and HP-70 Rigid Coupling for connection to Vic-Tap II. Part “B” Includes drill motor with ground fault interrupt and clip-on feed wheel assembly. Part “C” Vic-Tap II with 2Z\x” full port ball valve factory mounted. Available in sizes 4 x 2Z\x”, 5 x 2Z\x”, 6x 2Z\x”, and 8 x 2Z\x”. Available for purchase only (parts not sold separately). * Parts A & B can be purchased separately.

Tool Model Vic-Tap II - Parts A and B only Part A only Part B only Part C 4 x 2Z\x”/100 – 65 mm 5 x 2Z\x”/125 – 65 mm 6 x 2Z\x”/150 – 65 mm 8 x 2Z\x” /200 – 65 mm

Part Number R-000-902-VT2 R-100-902-VT2 R-300-901-VT1 R-016-931-010 R-020-931-010 R-024-931-010 R-032-931-010

Shipping Weight Lbs 70 – – – – – –

Rental Per Month $880.00 – – – – – –

List Price $14978.00 7202.00 + 5895.00 5895.00 5895.00 5895.00

NOTE: Items listed in shaded areas are non-cancellable and non-returnable. + Quoted on application. Contact Victaulic for pricing and availability. NOTE: For this application, a ground fault interrupt MUST be used. Available for purchase at $951.00. Part. No. N-E15-000-004.

NOTE: 40”/1016 mm minimum clearance is required for the Vic-Tap II.

SECTION 10 PIPE PREPARATION TOOLS

Pipe Cut-Off Tools VCT1 - Manual

Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.

11-40

VICTAULIC.COM PL2016-GENERAL-C


Pipe Preparation Tools Pipe Cut-Off Tools VCT1

VCT1 Manual handles 4 – 24” pipe up to 0.500” thick. A worm gear drive crank handle provides smooth, manual travel, easy control and accurate cutting. Tools are supplied with one each #00, #0, and #1 acetylene tip. Other tips are available for propane, MAPP and other gases. Tools are supplied with tip cleaner and lighter. Capacities: 4 – 24” pipe * Wall Thickness: 0.065” – 0.0500” (with tips supplied)

Tool Model

Part Number R000911VCT

VCT1

Tool Weight/ Shipping Weight Lbs 22/29

Tool List Price $7597.00

* To increase capacity, a 40-inch chain is available for $916.00 (Part No. N-C00-002-VCT). NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

VCT2 - Automatic

VCT2

VCT2 Automatic is powered by a 120 VAC motor with SCR remote control. A steel guide rail is recommended for cuts on vertical pipe (over 12” diameter). Tools are supplied with one each #00, #0, and #1 acetylene tips. Other tips are available for propane, MAPP and other gases. Tools are supplied with tip cleaner and lighter. Capacities: 6” – 24” pipe * Wall Thickness: 0.065” – 0.0500” (with tips supplied) Speed Control: SCR Power Required: 120 VAC Motor Rating: 15 W 10,000 rpm NOTE: Guide rail is sold separately. Recommended for pipe 14” and above.

Tool Model VCT2 Guide Rail D-600 for up to 24”/600 mm pipe

Part Number R000912VCT

Tool Weight/ Shipping Weight Lbs 33/39

List Price $20863.00

NC00170VC2

4438.00

* To increase capacity, a 40-inch chain is available for $916.00 (Part No. N-C00-002-VCT). NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

Accessories

Accessories

VCT1 & VCT2 STANDARD TIP FOR ACETYLENE (102)

Size 00 0 1

Part Number N-C00-102-T00 N-C00-102-0T0 N-C00-102-0T1

Price Each $120.00 120.00 120.00

Size Fuel Assy. – ZOSP – 2A Oxy. Assy. – ZOSP – 1A Fuel Plug – ZOP – 2A Oxy. Plug. – ZOP – 1A

Part Number N-CZS-000-P2A N-CZS-000-P1A N-CZ0-000-P2A N-CZ0-000-P1A

Price Each $320.50 320.50 215.50 215.50

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

SECTION 10 PIPE PREPARATION TOOLS

FLASHBACK ARRESTOR QUICK DISCONNECT

How to Order

Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.

VICTAULIC.COM PL2016-GENERAL-C

11-41


Pipe Preparation Tools WARNING

Always read and understand all operating and maintenance instructions before attempting to use any Victaulic pipe preparation tools.Victaulic tool operating and maintenance manuals can also be located at www.victaulic.com Any Victaulic pipe preparation tools must be used by trained operators ONLY. Operators that use Victaulic Pipe Cut-Off Tools must be knowledgeable in sound welding and safety procedures. Misuse of any equipment and lack of adherance to proper safety procedures may result in serious personal injury, property damage, and/or product damage.

When ordering tools or tool parts, please include the following information: A. PARTS ORDERS 1. Tool Model Number. Example: VE272SFS. 2. Tool Serial Number. The serial number can be found on the tool name plate. 3. Part Number and Description. Example: Part #09, R-201-261-0FS, Pump. 4. Where to send the part(s). Company Name, Address and Telephone Number 5. Attention: Person’s Name 6. Purchase Order Number. Order parts from the nearest Victaulic Sales Office. Consult back cover of this Price List for locations. B. TOOL ORDERS 1. Tool Model Number. Example: VE416FSD. 2. Tool Description. Example: Vic-Easy VE416FSD Roll Grooving Tool. 3. Where to send the tool. Company Name, Address and Telephone Number 4. Attention: Person’s Name 5.Purchase Order Number. Order tool from the nearest Victaulic Sales Office. Consult back cover of this Price List for locations. C. TOOL RENTAL ORDER 1. A completed and signed tool rental agreement. 2. Purchase Order Number. 3. Tool Model Number. Example: VE272SFS 4. Tool Description. Example: Vic-Easy VE272SFS Roll Grooving Tool. 5. Where to send the tool. Company Name, Address and Telephone 6. Attention: Person’s Name. Order tool from the nearest Victaulic Sales Office. Consult back cover of this Price List for locations. NOTES: Aluminum pipe must consist of 6061-T4 or 6063-T4 alloys for roll grooving. PVC grades that can be grooved – PVC Type I Grade I – PVC 1120; PVC Type I Grade II – PVC 1220; PVC Type II Grade I – PVC 2116. Copper/nickel pipe - contact Victaulic for details. Light weight stainless steel pipe (Sch. 10S and Sch. 5S) must be grooved using stainless Rx and RWX roll sets. Note: Vic-Easy tools and rolls shown on this chart will produce grooves in accordance with Victaulic Roll Groove Dimension charts and to ANSI/AWWA C-606 standards. SPECIAL NOTE: All roll grooving tools will be stocked with standard rolls only. No substitution will be done. Optional rolls are available at an additional cost.

SECTION 10 PIPE PREPARATION TOOLS

How to Order

Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.

11-42

VICTAULIC.COM PL2016-GENERAL-C


Pipe Preparation Tools Terms and Conditions of Tool Rental

TERMS AND CONDITIONS OF TOOL RENTAL 1. AGREEMENT. Lessor rents to Lessee and Lessee leases from Lessor the grooving tools and accessories listed on a Grooving Tool Rental Agreement, hereinafter leased property, for the term specified, commencing when the leased property is delivered to carrier for delivery to Lessee. 2.

RENTAL RATE. Lessee agrees to pay rent at the monthly rates in effect at the time the rental order is placed, and at the time of invoicing for subsequent months as specified in the current tool published price list. If the lease is terminated any time during a month, rental charges will be prorated on a daily basis, with a minimum of one week charge or $50 whichever is greater. Payment of invoices that will be issued at the end of each billing month is due in 30 days from date of invoice.

3.

ON-ACCOUNT PREPAYMENT. At the Lessor’s option, an on-account prepayment may be required of the Lessee to establish credit. When required, the cheque of the amount specified by the Lessor must be given to the Lessor to execute the agreement. Upon termination of the lease the amount, less any open invoices or payment for damages by reason of other than normal recommended use, shall be returned.

4. FREIGHT. To Lessee: F.O.B. Shipping point (lessors option), freight charges collect Lessee shall pay shipping charges for return of leased property. 5. USE. All leased property is for the exclusive use of Lessee only, and may not be sublet or loaned to or used by any other party without the prior written consent of the Lessor. 6. OWNERSHIP. Lessee acknowledges that title to the leased property is and shall remain in Lessor at all times. 7. TAXES. Lessee shall pay all taxes, assessments, license and registration fees levied on or in respect of the leased property, or the rental thereof, during currency of this lease. Lessee shall pay all sales taxes invoiced by Lessor unless the Lessor provides a valid tax exemption certificate. 8. ACCESS. Lessor shall at all times have free access to the leased property and to the premises on which it is located for the purpose of examining the property. 9.

RETURN OF PROPERTY. Lessee shall return all leased property to Lessor in good order and condition, reasonable wear and tear expected, upon termination of the lease, and shall return the leased property, properly crated, freight prepaid and insured for its full market value to Lessor at main or branch warehouse. If Lessee fails to return the leased property upon lease termination, Lessee shall continue to be liable to pay rent until so returned, and Lessor shall also have the complete unrestricted right to remove the leased property from Lessee’s premises, without recourse to any legal proceedings.

10. REPAIRS AND SERVICING. If leased property, excluding Tool Bits, becomes worn or unserviceable from normal recommended use, Lessor will supply tools and/or parts, without additional cost, upon return of the leased property to Lessor, freight prepaid in accordance with item #9. 11. DAMAGE OR LOSS. If leased property is damaged by reason of other than normal recommended use, or damaged by fire, loss or theft, Lessee shall indemnify Lessor for the cost of repairs or replacement. If leased property Is not returned to Lessor in accordance with the terms of this agreement, Lessee shall pay to the Lessor as liquidated damages an amount equal to the published net user price of the leased property. If leased property is returned less the container wrench set or other accessories supplied with the leased tool, Lessee shall pay to the Lessor the cost of replacement by the Lessor. 12. LIABILITY. Lessee assumes full responsibility for the operation of the leased property and agrees to hold Lessor harmless from any and all claims for injuries or damages arising out of the use of the leased property except those occasioned by Lessor’s negligence. Lessor makes no representation or warranty is no condition expressed or implied, statutory or otherwise, concerning the leased property, its quality, fitness for particular purpose or merchantability except as herein otherwise expressly provided Lessor shall under no circumstances have any liability, including without limitation, liability for consequential damages occasioned by the use or operation or leasing of the leased property hereunder. 13. REMEDIES ON DEFAULT. If the Lessee fails to pay any rent or other amount herein provided and such failure continues for a period of 15 days after the due date for such payment, the Lessor may by notice in writing at its option declare the term of this lease to be terminated (whereupon all future payments shall become immediately due and payable hereunder as liquidated damages for loss of a bargain and not as a penalty) whereupon the Lessee shall forthwith redeliver the leased property to the Lessor at the Lessee’s sole cost and expense and otherwise in accordance with the provisions of paragraph #9 hereof.

EFFECTIVE OCTOBER 1, 2008

Warranty Standard product warranty applies. See inside back cover page.

SECTION 10 PIPE PREPARATION TOOLS

Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.

VICTAULIC.COM PL2016-GENERAL-C

11-43


Terms and Conditions of Sale

Terms and Conditions of Sale Terms and Conditions of Sale to Victaulic Distributors 1. SALES TAX is extra where applicable.. 2. TERMS OF PAYMENT are net 30 days. 3. MINIMUM INVOICE CHARGE is $100.00 net for any single order. 4. SHIPPING TERMS F.O.B. Shipping Point (our option), Freight prepaid and allowed on single orders having a net price value of $8,500 and over, for shipment at one time to distributor’s warehouse excluding the Northwest Territories, the Yukon and Nunavut. Freight Collect on s­ ingle orders less than $8,500 net. Special shipping methods or packaging are available at the distributor’s expense. Additional freight charges may be incurred for specific product lines (i.e. large diameter couplings, fittings, valves and expansion compensators. 5. ROUTING The most economical routing to recognized delivery points will be used at our discretion. If special routing is desired, order should so state. 6. SHIPMENT DATE We accept your order subject to the approval of our Credit Department and contingent upon strikes, accidents and causes beyond our control and to the conditions hereafter set out. Victaulic will endeavour to ship by the scheduled delivery date, but reserves the right to ship within a reasonable period thereafter. Under no circumstances shall Victaulic be liable for damages of any kind, including but not limited to incidental or consequential damages for lost profits or lost sales or liquidated damages, directly or indirectly arising from delays or failure to meet shipping dates. 7. SHORTAGES All material is carefully examined, counted and packed by experienced employees. Claims for corrections must be made within 10 days of receipt of goods. We prove our count by weight. Claims for shortages are subject to that test. 8. SHIPPING LOSS, DAMAGE OR DELAY All shipped material become the property of the buyer when the freight company takes delivery of the products even if prices quoted includes freight charges. The freight company is responsible to the buyer for complete and safe delivery of the goods. It is the buyer’s responsibility to file claim with the freight company of any loss, damage of incomplete delivery of goods purchased. For your own protection, have the transportation company’s agent verify damages, shortages or transport delays and note them on freight bill over his signature. Victaulic’s responsibility ceases when goods are delivered to the carrier in good condition and its receipt obtained. 9. CANCELLATIONS Orders accepted cannot be countermanded without our written consent. Orders for all non-standard (non-cancellable and non-returnable) items whether in the price list and indicated by prices in shaded areas, or made to order, cannot be cancelled. 10. MATERIAL RETURNS Sale is final of all non-standard (non-cancellable and non-returnable) items, whether in the price list and indicated by prices in shaded areas, or made to order. Victaulic reserves the right to change the standard/non-standard item designation without notice. Return will be authorized for such material only in the case of Victaulic shipping or order processing error that is reported in no more than 10 days of shipment. Surplus Victaulic products that are accepted for return will be authorized with a Return Material Authorization (RMA) number and an estimate of credit that is based on original invoice amounts. Any material returned to Victaulic will be accepted only if clearly marked with an RMA number and received in one shipment. Credit will be offered only for standard price list items (indicated by prices not shaded) that can be made resalable. Valves must be resalable and packaged as originally shipped. Valves will not be refurbished. Sprinkler heads must be returned in unopened original factory standard lot packaging and in resalable condition without evidence of tampering or damage. No credit will be given for gaskets whether loose or in couplings. Final credit will be less a 35% restocking charge, refurbishing costs and original freight paid. On amounts returned with a net value totaling under $500, the restocking fee will be $175 minimum. Further conditions may apply on return of certain materials. Contact Victaulic for details when considering a return. 11. CHANGES TO TERMS No alteration, modification or waiver of these terms and conditions whether on customer’s purchase order or otherwise shall be valid unless the change is specifically accepted in writing by an authorized representative of Victaulic. Victaulic Company of Canada maintains a continual policy of product improvement and, therefore, reserves the right to change prices, terms and conditions of sale, product specifications, designs, and standard equipment without notice and without incurring obligation. Warranty, Victaulic Sales and Service Centers

Warranty We warrant all products to be free from defects in materials and workmanship under normal conditions of use and service. Our obligation under this warranty is limited to repairing or replacing at our option at our factory any product which shall within one year after delivery to original buyer be returned with transportation charges prepaid, and which our examination shall show to our satisfaction to have been defective. THIS WARRANTY IS MADE EXPRESSLY IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THE BUYER’S SOLE AND EXLUSIVE REMEDY SHALL BE FOR THE REPAIR OR REPLACEMENT OF DEFECTIVE PRODUCTS AS PROVIDED HEREIN. THE BUYER AGREES THAT NO OTHER REMEDY (INCLUDING, BUT NOT LIMITED TO, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR LOST PROFITS, LOST SALES, INJURY TO PERSON OR PROPERTY OR ANY OTHER INCIDENTAL OR CONSEQUENTIAL LOSS) SHALL BE AVAILABLE TO HIM. Victaulic neither assumes nor authorizes any person to assume for it any other liability in connection with the sale of such products. This warranty shall not apply to any product which has been subject to misuse, negligence or accident, which has been repaired or altered in any manner outside of Victaulic’s factory or which has been used in a manner contrary to Victaulic’s instructions or recommendations. Victaulic shall not be responsible for design errors due to inaccurate or incomplete ­information supplied by the Buyer or its representatives.­ Items purchased by Victaulic and resold will have the original equipment manufacturer’s warranty extended to Victaulic customers. EFFECTIVE APRIL 7, 2014


GENERAL PRICE LIST VICTAULIC® LOCATIONS IN CANADA RICHMOND HILL 123 Newkirk Road Richmond Hill, ON L4C 3G5 905 884 7444 905 884 9774 (fax)

VANCOUVER 8129 River Way Delta, BC V4G 1L2 604 940 3301 604 940 3360 (fax)

SUDBURY 1070 Elisabella Street Sudbury, ON P3A 5K2 705 560 9595 705 560 9490 (fax)

viccanada@victaulic.com

EDMONTON 17329 111th Avenue NW Edmonton, AB T5S 0J5 780 452 0680 780 452 2430 (fax)

MONTREAL 5895 rue Kieran Saint Laurent, QC H4S 0A3 514 337 3500 514 337 1949 (fax)

victaulic.com

victaulic.com PL2016-GENERAL-C 9218 REV A 02/2016 VICTAULIC AND ALL OTHER VICTAULIC MARKS ARE THE TRADEMARKS OR REGISTERED TRADEMARKS OF VICTAULIC COMPANY, AND/OR ITS AFFILIATED ENTITIES, IN THE U.S. AND/OR OTHER COUNTRIES. © 2016 VICTAULIC COMPANY. ALL RIGHTS RESERVED.


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.