1000310000_CAT2_E_EN by Wexøe A/S

Contents

Signals & data 3.50 mm pitch

PCB plug-in connectors

Male connectors with THR solder connection

E.2

Male connectors with solder connection

E.16

Socket connectors with clamping yoke connection

E.28

Socket connectors with tension clamp connection

E.34

Socket connectors with IDC

E.36

Socket connectors with Push In connection for decentralised I/O electronics

E.38

E.1

Male connectors with THR solder connection

SL-SMT 3.5/90G

Derating curve

Signals & data 3.50 mm pitch

SL-SMT 3.5/90G Box

L1+P+1.4

Conductor current to EN 60947-7-1

min. No. of poles (2-pole)

10 20 30 40 50 60 70 80 90 100 110 Ambient temperature T [°C]

Technical data

SL-SMT3.5/90 / BL180 / H05V-K0.5

Rated data to IEC 60664-1 / IEC 61984 Clamping range, max. mm2 Solid H05(07) V-U mm2 Stranded H07 V-R mm2 Flexible H05(07) V-K mm2 Flexible with ferrule mm2 Ferrule with plastic collar mm2 Stripping length mm Screwdriver blade mm according to norm Tightening torque range Nm Rated current at ambient temperature

16 14 12 10 8 6 4 2 0

min. No. of poles (2-pole)

Ordering data Solder pin length Colour of plastic

1.5 mm black

3.2 mm black

Order No. 1761542001 1761552001 1761562001 1761572001 1761582001 1761592001 1761602001 1761612001 1761622001 1761632001 1761642001 1761652001 1761662001 1761672001 1761682001 1761692001 1761702001 1761712001 1761722001 1761732001 1761742001 1761752001 1761762001

Order No. 1841630000 1841640000 1841650000 1841660000 1841670000 1841680000 1841690000 1841700000 1841710000 1841720000 1841730000 1841740000 1841750000 1841760000 1841770000 1841780000 1841790000 1841800000 1841810000 1841820000 1841830000 1841840000 1841850000

Conductor current to EN 60947-7-1

max. No. of poles (24-pole)

10 20 30 40 50 60 70 80 90 100 110 Ambient temperature T [°C]

A Overvoltage category Pollution severity V kV

20°C 15

40°C 13

III 3

III 2

II 2

160 2.5

250 2.5

a UL 1059 rated data B C D Nominal voltage V 300 300 Rated current A 10 10 AWG conductor r CSA C22.2 rated data B C D Rated voltage V 300 300 Rated current A 10 10 AWG conductor Material data Type of insulating material LCP GF Flammability class acc. UL94 V-0 Contact base material CuSn Material of contact surface tinned Information • Additional colours on request • Gold-plated contact surfaces on request • Rated current related to rated cross-section and min. No. of poles. • Hole diameter D = 1.4+0.1mm • Hole diameter D = 1.5+0.1mm for 9 poles • P on drg. = pitch • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.

E.2

max. No. of poles (24-pole)

• 250 V (IEC) / 300 V (UL) • 15 A (IEC) / 10 A (UL)

Rated voltage Rated impulse voltage

10.2 0.402"

Load current I [A]

11.1 0.437"

L1+P+0.055" 7.5 0.293"

High-temperature-resistant, angled, closed male connector for all common soldering methods in 3.5 mm pitch. Optimised for automatic assembly. Packed in box or tape. 3.2 mm solder pin suitable for reflow and wave soldering. Stable up to 290°C (2 x 30 s), which exceeds the requirements of EN 61760-1. These male connectors can be labelled and coded.

Load current I [A]

SL-SMT3.5/90 / BL180 / H07V-K1.5 18 16 14 12 10 8 6 4 2 0

Pitch 3.50 mm PolesL1 mm 2 3.50 3 7.00 4 10.50 5 14.00 6 17.50 7 21.00 8 24.50 9 28.00 10 31.50 11 35.00 12 38.50 13 42.00 14 45.50 15 49.00 16 52.50 17 56.00 18 59.50 19 63.00 20 66.50 21 70.00 22 73.50 23 77.00 24 80.50

(inch) Qty. (0.138) 100 (0.276) 100 (0.413) 100 (0.551) 50 (0.689) 50 (0.827) 50 (0.965) 50 (1.102) 50 (1.240) 50 (1.378) 50 (1.516) 50 (1.654) 50 (1.791) 50 (1.929) 50 (2.067) 50 (2.205) 20 (2.343) 20 (2.480) 20 (2.618) 20 (2.756) 20 (2.894) 20 (3.031) 20 (3.169) 20

Male connectors with THR solder connection

Accessories Signals & data 3.50 mm pitch

SL-SMT 3.5/90G Tape

Possible colors Additional colours on request

Coding See chapter accessories

Ordering data Solder pin length Colour of plastic

1.5 mm black

Locking lever See chapter accessories

Marking strips See chapter accessories

Pitch 3.50 mm PolesL1 mm 2 3.50 3 7.00 4 10.50 5 14.00 6 17.50 7 21.00 8 24.50 9 28.00 10 31.50 11 35.00

(inch) Qty. (0.138) 385 (0.276) 385 (0.413) 385 (0.551) 385 (0.689) 385 (0.827) 385 (0.965) 385 (1.102) 385 (1.240) 385 (1.378) 385

Order No. 1761544002 1761554002 1761564002 1761574002 1761584001 1761594001 1761604001 1761614001 1761624001 1761634001

Order No.

Floodlight indicator See chapter accessories

Tape widths: 32, 44, 56, 72, 88

E.3

Male connectors with THR solder connection

SL-SMT 3.5/90F

Derating curve

Signals & data 3.50 mm pitch

SL-SMT 3.5/90F Box

11.1 0.437"

L1+3xP

min. No. of poles (2-pole)

10 20 30 40 50 60 70 80 90 100 110

SL-SMT3.5/90 / BL180 / H05V-K0.5

D Ø 2.3+0.1 0.091"

16 14 12 10 8 6 4 2 0

min. No. of poles (2-pole)

Ordering data Solder pin length Colour of plastic

3.2 mm black

Conductor current to EN 60947-7-1

max. No. of poles (24-pole)

10 20 30 40 50 60 70 80 90 100 110 Ambient temperature T [°C]

A Overvoltage category Pollution severity V kV

20°C 15

40°C 13

III 3

III 2

II 2

160 2.5

250 2.5

E.4

max. No. of poles (24-pole)

Ambient temperature T [°C]

Technical data

10.2 0.402"

L1+2xP

• 250 V (IEC) / 300 V (UL) • 15 A (IEC) / 10 A (UL)

Rated voltage Rated impulse voltage

7.5 0.293"

Conductor current to EN 60947-7-1

Load current I [A]

18 16 14 12 10 8 6 4 2 0

4.7 0.185"

High-temperature-resistant, angled, closed male connector with screw flange for all common soldering methods in 3.5 mm pitch. Optimised for automatic assembly. 3.2 mm solder pin suitable for reflow and wave soldering. Stable up to 290°C (2 x 30 s), which exceeds the requirements of EN 61760-1. These male connectors can be labelled and coded. Packaged in cardboard box.

Load current I [A]

SL-SMT3.5/90 / BL180 / H07V-K1.5

Order No.

Order No. 1842080000 1842090000 1842100000 1842110000 1842120000 1842130000 1842140000 1842150000 1842160000 1842170000 1842180000 1842190000 1842200000 1842210000 1842220000 1842230000 1842240000 1842250000 1842260000 1842270000 1842280000 1842290000 1842300000

Male connectors with THR solder connection

Signals & data 3.50 mm pitch

Accessories

Possible colors Additional colours on request

Coding See chapter accessories

Locking lever See chapter accessories

Marking strips See chapter accessories

Floodlight indicator See chapter accessories

E.5

Male connectors with THR solder connection

SL-SMT 3.5/90LF

Derating curve

Signals & data 3.50 mm pitch

SL-SMT 3.5/90LF Box

L1+3xP

min. No. of poles (2-pole)

L1 max. No. of poles (24-pole)

10 20 30 40 50 60 70 80 90 100 110

SL-SMT3.5/90 / BL180 / H05V-K0.5

16 14 12 10 8 6 4 2 0

min. No. of poles (2-pole)

Ordering data Solder pin length Colour of plastic

1.5 mm black

3.2 mm black

Order No. 1804940000 1804950000 1804960000 1804970000 1804980000 1804990000 1805000000 1805010000 1805020000 1805030000 1805040000 1805050000 1805060000 1805070000 1805080000 1805090000 1805100000 1805110000 1805120000 1805130000 1805140000 1805150000 1805160000

Order No. 1841860000 1841870000 1841880000 1841890000 1841900000 1841910000 1841920000 1841930000 1841940000 1841950000 1804340000 1841960000 1841970000 1841980000 1841990000 1842000000 1842010000 1842020000 1842030000 1842040000 1842050000 1842060000 1842070000

Conductor current to EN 60947-7-1

max. No. of poles (24-pole)

10 20 30 40 50 60 70 80 90 100 110 Ambient temperature T [°C]

A Overvoltage category Pollution severity V kV

20°C 15

40°C 13

III 3

III 2

II 2

160 2.5

250 2.5

E.6

Ambient temperature T [°C]

Technical data

10.2 0.402"

L1+2xP

• 250 V (IEC) / 300 V (UL) • 15 A (IEC) / 10 A (UL)

Rated voltage Rated impulse voltage

7.5 0.293"

Conductor current to EN 60947-7-1

Load current I [A]

18 16 14 12 10 8 6 4 2 0

11.1 0.437"

4.7 0.185"

High-temperature-resistant, angled, closed male connector with solder flange for all common soldering methods in 3.5 mm pitch. Optimised for automatic assembly. Packed in box or tape. 3.2 mm solder pin suitable for reflow and wave soldering. Stable up to 290°C (2 x 30 s), which exceeds the requirements of EN 61760-1. These male connectors can be labelled and coded.

Load current I [A]

SL-SMT3.5/90 / BL180 / H07V-K1.5

Male connectors with THR solder connection

Accessories Signals & data 3.50 mm pitch

SL-SMT 3.5/90LF Tape

Possible colors Additional colours on request

Coding See chapter accessories

Ordering data Solder pin length Colour of plastic

1.5 mm black

Locking lever See chapter accessories

Marking strips See chapter accessories

Pitch 3.50 mm PolesL1 mm 2 3.50 3 7.00 4 10.50 5 14.00 6 17.50 7 21.00 8 24.50 9 28.00 10 31.50

(inch) Qty. (0.138) 385 (0.276) 385 (0.413) 385 (0.551) 385 (0.689) 385 (0.827) 385 (0.965) 385 (1.102) 385 (1.240) 385

Order No. 1805310000 1805320000 1805330000 1805340000 1805350000 1805360000 1805370000 1805380000 1005180000

Order No.

Floodlight indicator See chapter accessories

Tape widths: 32, 44, 56, 72, 88

E.7

Male connectors with THR solder connection

SL-SMT 3.5/180G

Derating curve

Signals & data 3.50 mm pitch

SL-SMT 3.5/180G Box

L1+P+1,4

Conductor current to EN 60947-7-1

min. No. of poles (2-pole)

10 20 30 40 50 60 70 80 90 100 110 Ambient temperature T [°C]

Technical data

SL-SMT3.5/180 / BL180 / H05V-K0.5

16 14 12 10 8 6 4 2 0

min. No. of poles (2-pole)

Ordering data Solder pin length Colour of plastic

1.5 mm black

3.2 mm black

Order No. 1752982001 1752992001 1753002001 1753012001 1753022001 1753032001 1753042001 1753052001 1753062001 1753072001 1753082001 1753092001 1753102001 1753112001 1753122001 1753132001 1753142001 1753152001 1753162001 1753172001 1753182001 1753192001 1753202001

Order No. 1842320000 1842330000 1842340000 1842350000 1842360000 1842370000 1842380000 1842390000 1836990000 1842400000 1842410000 1842420000 1842430000 1842440000 1842450000 1842460000 1842470000 1842480000 1842490000 1842500000 1842510000 1842520000 1842530000

Conductor current to EN 60947-7-1

max. No. of poles (24-pole)

10 20 30 40 50 60 70 80 90 100 110 Ambient temperature T [°C]

A Overvoltage category Pollution severity V kV

20°C 15

40°C 13

III 3

III 2

II 2

160 2.5

250 2.5

E.8

3,5 0.138"

• 250 V (IEC) / 300 V (UL) • 15 A (IEC) / 10 A (UL)

Rated voltage Rated impulse voltage

7,5 0.293"

max. No. of poles (24-pole)

Load current I [A]

18 16 14 12 10 8 6 4 2 0

L1+P+0.055"

11,1 0.435"

High-temperature-resistant, straight, closed male connector for all common soldering methods in 3.5 mm pitch. Optimised for automatic assembly. Packed in box or tape. 3.2 mm solder pin suitable for reflow and wave soldering. Stable up to 290°C (2 x 30 s), which exceeds the requirements of EN 61760-1. These male connectors can be labelled and coded.

Load current I [A]

SL-SMT3.5/180 / BL180 / H07V-K1.5

Male connectors with THR solder connection

Accessories Signals & data 3.50 mm pitch

SL-SMT 3.5/180G Tape

Possible colors Additional colours on request

Coding See chapter accessories

Ordering data Solder pin length Colour of plastic

1.5 mm black

Locking lever See chapter accessories

Marking strips See chapter accessories

Pitch 3.50 mm PolesL1 mm 2 3.50 3 7.00 4 10.50 5 14.00 6 17.50 7 21.00 8 24.50 9 28.00 10 31.50 11 35.00

(inch) Qty. (0.138) 265 (0.276) 265 (0.413) 265 (0.551) 265 (0.689) 265 (0.827) 265 (0.965) 265 (1.102) 265 (1.240) 265 (1.378) 265

Order No. 1752984002 1752994002 1753004002 1753014002 1753024001 1753034001 1753044001 1753054001 1753064001 1753074001

Order No.

Tape widths: 32, 44, 56, 72, 88

E.9

Male connectors with THR solder connection

SL-SMT 3.5/180F

Derating curve

Signals & data 3.50 mm pitch

SL-SMT 3.5/180F Box

L1+3xP

7,5 0.293"

Conductor current to EN 60947-7-1

min. No. of poles (2-pole)

max. No. of poles (24-pole)

10 20 30 40 50 60 70 80 90 100 110

D 2,3+0,1 0.091"

Ambient temperature T [°C]

Technical data

SL-SMT3.5/180 / BL180 / H05V-K0.5

16 14 12 10 8 6 4 2 0

min. No. of poles (2-pole)

Ordering data Solder pin length Colour of plastic

3.2 mm black

Conductor current to EN 60947-7-1

max. No. of poles (24-pole)

10 20 30 40 50 60 70 80 90 100 110 Ambient temperature T [°C]

A Overvoltage category Pollution severity V kV

20°C 15

40°C 13

III 3

III 2

II 2

160 2.5

250 2.5

E.10

L1 P

• 250 V (IEC) / 300 V (UL) • 15 A (IEC) / 10 A (UL)

Rated voltage Rated impulse voltage

3,5 0.138"

L1+2xP

Load current I [A]

11,1 0.435"

High-temperature-resistant, straight, closed male connector with screw flange for all common soldering methods in 3.5 mm pitch. Optimised for automatic assembly. 3.2 mm solder pin suitable for reflow and wave soldering. Stable up to 290°C (2 x 30 s), which exceeds the requirements of EN 61760-1. These male connectors can be labelled and coded. Packaged in cardboard box.

Load current I [A]

SL-SMT3.5/180 / BL180 / H07V-K1.5 18 16 14 12 10 8 6 4 2 0

Order No.

Order No. 1842770000 1842780000 1842790000 1842800000 1842810000 1842820000 1842830000 1842840000 1842850000 1842860000 1842870000 1842880000 1842890000 1842900000 1842910000 1842920000 1842930000 1842940000 1842950000 1842960000 1842970000 1842980000 1842990000

Male connectors with THR solder connection

Signals & data 3.50 mm pitch

Accessories

Possible colors Additional colours on request

Coding See chapter accessories

Locking lever See chapter accessories

Marking strips See chapter accessories

E.11

Male connectors with THR solder connection

SL-SMT 3.5/180LF

Derating curve

Signals & data 3.50 mm pitch

SL-SMT 3.5/180LF Box

7,5 0.293"

L1+3xP

Conductor current to EN 60947-7-1

min. No. of poles (2-pole)

3,5 0.138" L1+2xP max. No. of poles (24-pole)

Technical data

SL-SMT3.5/180 / BL180 / H05V-K0.5

1,5+0,1 0.059"

16 14 12 10 8 6 4 2 0

min. No. of poles (2-pole)

Ordering data Solder pin length Colour of plastic

1.5 mm black

3.2 mm black

Order No. 1804700000 1804710000 1804720000 1804730000 1804740000 1804750000 1804760000 1804770000 1804780000 1804790000 1804800000 1804810000 1804820000 1804830000 1804840000 1804850000 1804860000 1804870000 1804890000 1804900000 1804910000 1804920000 1804930000

Order No. 1842540000 1842550000 1842560000 1842570000 1842580000 1842590000 1842600000 1842610000 1842620000 1842630000 1842640000 1842650000 1842660000 1842670000 1842680000 1842690000 1842700000 1842710000 1842720000 1842730000 1842740000 1842750000 1842760000

Conductor current to EN 60947-7-1

max. No. of poles (24-pole)

10 20 30 40 50 60 70 80 90 100 110 Ambient temperature T [°C]

A Overvoltage category Pollution severity V kV

20°C 15

40°C 13

III 3

III 2

II 2

160 2.5

250 2.5

E.12

10 20 30 40 50 60 70 80 90 100 110 Ambient temperature T [°C]

• 250 V (IEC) / 300 V (UL) • 15 A (IEC) / 10 A (UL)

Rated voltage Rated impulse voltage

L1 P

Load current I [A]

18 16 14 12 10 8 6 4 2 0

11,1 0.435"

High-temperature-resistant, straight, closed male connector with solder flange for all common soldering methods in 3.5 mm pitch. Optimised for automatic assembly. Packed in box or tape. 3.2 mm solder pin suitable for reflow and wave soldering. Stable up to 290°C (2 x 30 s), which exceeds the requirements of EN 61760-1. These male connectors can be labelled and coded.

Load current I [A]

SL-SMT3.5/180 / BL180 / H07V-K1.5

Male connectors with THR solder connection

Accessories Signals & data 3.50 mm pitch

SL-SMT 3.5/180LF Tape

Possible colors Additional colours on request

Coding See chapter accessories

Ordering data Solder pin length Colour of plastic

1.5 mm black

Locking lever See chapter accessories

Marking strips See chapter accessories

Pitch 3.50 mm PolesL1 mm 2 3.50 3 7.00 4 10.50 5 14.00 6 17.50 7 21.00 8 24.50 9 28.00

(inch) Qty. (0.138) 265 (0.276) 265 (0.413) 265 (0.551) 265 (0.689) 265 (0.827) 265 (0.965) 265 (1.102) 265

Order No. 1805210000 1805230000 1805240000 1805250000 1805270000 1805280000 1805290000 1805300000

Order No.

Tape widths: 32, 44, 56, 72, 88

E.13

Male connectors with THR solder connection

SL-THR 3.5/135

Derating curve

Signals & data 3.50 mm pitch

SL-THR 3.5/135 F Box

L1+3xP

Conductor current to EN 60947-7-1

min. No. of poles (2-pole)

1,3 +0,1 0.051"

10 20 30 40 50 60 70 80 90 100 110 Ambient temperature T [°C]

Technical data

SL-THR3.5/135 / BL180 / H05V-K0.5

16 14 12 10 8 6 4 2 0

min. No. of poles (2-pole)

Ordering data Solder pin length Colour of plastic

3.2 mm black

Conductor current to EN 60947-7-1

max. No. of poles (24-pole)

10 20 30 40 50 60 70 80 90 100 110 Ambient temperature T [°C]

A Overvoltage category Pollution severity V kV

20°C 15

40°C 13

III 3

III 2

II 2

160 2.5

250 2.5

E.14

6,8 0.268"

max. No. of poles (24-pole)

Rated voltage Rated impulse voltage

13 0.513"

18 16 14 12 10 8 6 4 2 0

• 250 V (IEC) / 300 V (UL) • 15 A (IEC) / 10 A (UL)

Load current I [A]

High-temperature-resistant, 135° angled, closed male connector with solder flange for all standard soldering techniques at 3.5 mm pitch. 3.2 mm pin length, suitable for reflow and wave soldering applications. Stable up to 290°C (2 x 30 s), which exceeds the requirements of EN 61760-1. These male connectors provide space for labelling and can be coded. Packed in cardboard box.

13,2 0.519"

SL-THR3.5/135 / BL180 / H07V-K1.5

(inch) Qty. (0.138) 100 (0.276) 100 (0.413) 100 (0.551) 100 (0.689) 50 (0.827) 50 (0.965) 50 (1.102) 50 (1.240) 50 (1.378) 50 (1.516) 50 (1.654) 50 (1.791) 50 (1.929) 50 (2.067) 50 (2.205) 20 (2.343) 20 (2.480) 20 (2.618) 20 (2.756) 20 (2.894) 20 (3.031) 20 (3.169) 20

Order No.

Order No. 1003510000 1003520000 1003530000 1003540000 1003550000 1003560000 1003570000 1003580000 1003590000 1003600000 1003620000 1003630000 1003640000 1003650000 1003660000 1003670000 1003680000 1003690000 1003700000 1003710000 1003720000 1003730000 1003740000

Male connectors with THR solder connection

Signals & data 3.50 mm pitch

Accessories

Possible colors Additional colours on request

Coding See chapter accessories

Locking lever See chapter accessories

Marking strips See chapter accessories

E.15

Male connectors with solder connection

SL 3.5/90

Derating curve

Signals & data 3.50 mm pitch

SL 3.5/90

L1+P

• 250 V (IEC) / 300 V (UL) • 17 A (IEC) / 10 A (UL)

Conductor current to EN 60947- 7-1

min. No. of poles (2-pole)

L1 P

10,2 0.402"

max. No. of poles (24-pole)

1,3+0,1 0.051"

10 20 30 40 50 60 70 80 90 100 110 Ambient temperature T [°C]

Technical data

SL3.5/90 / BL180 / H05V-K0.5

Rated current at ambient temperature

16 14 12 10 8 6 4 2 0

min. No. of poles (2-pole)

Solder pin length Colour of plastic

3.2 mm orange

Conductor current to EN 60947- 7-1

max. No. of poles (24-pole)

V kV

20°C 17

10 20 30 40 50 60 70 80 90 100 110

40°C 14.5

III 3

III 2

II 2

160 2.5

250 2.5

a UL 1059 rated data B C D Nominal voltage V 300 300 Rated current A 10 10 AWG conductor r CSA C22.2 rated data B C D Rated voltage V 300 300 Rated current A 10 10 AWG conductor Material data Type of insulating material PBT Flammability class acc. UL94 V-0 Contact base material CuSn Material of contact surface tinned Information • Additional colours on request • Gold-plated contact surfaces on request • Rated current related to rated cross-section and min. No. of poles. • P on drg. = pitch • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.

SL3.5/90 / BL270 / H07V-K1.5

Load current I [A]

Overvoltage category Pollution severity

18 16 14 12 10 8 6 4 2 0

Conductor current to EN 60947- 7-1

min. No. of poles (2-pole)

max. No. of poles (24-pole)

10 20 30 40 50 60 70 80 90 100 110 Ambient temperature T [°C]

SL3.5/90 / BL270 / H05V-K0.5 12 min. No. of poles (2-pole)

Conductor current to EN 60947-7-1

8 6 4 max. No. of poles (24-pole)

2 0 0

10 20 30 40 50 60 70 80 90 100 110 Ambient temperature T [°C]

E.16

Ordering data

Ambient temperature T [°C]

Rated voltage Rated impulse voltage

Load current I [A]

11,1 0.437"

7,5 0.295"

Angled male connector (90° outlet direction) for wave soldering method at 3.5 mm pitch. The male connector is available in an open, closed and flange version. The male connectors provide space for labelling and can be coded. Packaged in cardboard box.

Load current I [A]

SL3.5/90 / BL180 / H07V-K1.5 20 18 16 14 12 10 8 6 4 2 0

Order No. 1597210000 1597220000 1597230000 1597240000 1597250000 1597260000 1597270000 1597280000 1597290000 1597300000 1597310000 1597320000 1597330000 1597340000 1597350000 1618990000 1619000000 1619010000 1619020000 1619030000 1619040000 1619050000 1619060000

Order No.

Male connectors with solder connection

Accessories SL 3.5/90F

Signals & data 3.50 mm pitch

SL 3.5/90G

Possible colors Additional colours on request

L1+3xP

10.2 0.402"

L1+2xP L1 P

1.3+0.1 0.051"

2.3+0.1 0.091"

Ordering data Solder pin length Colour of plastic

11.1 0.437"

7.5 0.295"

11.1 0.402"

10.2 0.402"

4.7 0.185"

7.5 0.298"

L1+P+1.4 L1+P+0.055"

1.3+0.1 0.051"

Coding See chapter accessories

Ordering data 3.2 mm orange

Solder pin length Colour of plastic

3.2 mm orange

Locking lever See chapter accessories

Marking strips See chapter accessories

Pitch 3.50 mm Order No. 1605070000 1605080000 1605090000 1605100000 1605110000 1605120000 1605130000 1605140000 1605150000 1605160000 1605170000 1605180000 1605190000 1605200000 1605210000 1619380000 1619390000 1619400000 1619410000 1619420000 1619430000 1619440000 1619450000

Order No.

PolesL1 mm 2 3.50 3 7.00 4 10.50 5 14.00 6 17.50 7 21.00 8 24.50 9 28.00 10 31.50 11 35.00 12 38.50 13 42.00 14 45.50 15 49.00 16 52.50 17 56.00 18 59.50 19 63.00 20 66.50 21 70.00 22 73.50 23 77.00 24 80.50

Order No. 1607040000 1607050000 1607060000 1607070000 1607080000 1607090000 1607100000 1607110000 1607120000 1607130000 1607140000 1607150000 1607160000 1607170000 1607180000 1619770000 1619780000 1619790000 1619800000 1619810000 1619820000 1619830000 1619840000

Order No.

Floodlight indicator See chapter accessories

E.17

Male connectors with solder connection

SL 3.5/180

Derating curve

Signals & data 3.50 mm pitch

SL 3.5/180

L1+P

• 250 V (IEC) / 300 V (UL) • 17 A (IEC) / 10 A (UL)

Conductor current to EN 60947-7-1

min. No. of poles (2-pole)

L1 max. No. of poles (24-pole)

7,5 0.295" 11,1 0.437"

Straight male connector (180° outlet direction) for wave soldering method with 3.5 mm pitch. Available in open, closed and flange versions. These male connectors provide space for labelling and can be coded. Supplied in cardboard box.

Load current I [A]

SL3.5/180 / BL180 / H07V-K1.5 20 18 16 14 12 10 8 6 4 2 0

3,5 0.138" 1,3+0,1 0.051"

10 20 30 40 50 60 70 80 90 100 110 Ambient temperature T [°C]

Technical data

SL3.5/180 / BL180 / H05V-K0.5

Rated current at ambient temperature Overvoltage category Pollution severity

min. No. of poles (2-pole)

Ordering data Solder pin length Colour of plastic

3.2 mm orange

Conductor current to EN 60947-7-1

max. No. of poles (24-pole)

V kV

20°C 17

10 20 30 40 50 60 70 80 90 100 110

40°C 14.5

III 3

III 2

II 2

160 2.5

250 2.5

a UL 1059 rated data B C D Nominal voltage V 300 300 Rated current A 10 10 AWG conductor r CSA C22.2 rated data B C D Rated voltage V 300 300 Rated current A 10 10 AWG conductor Material data Type of insulating material PBT Flammability class acc. UL94 V-0 Contact base material CuSn Material of contact surface tinned Information • Additional colours on request • Gold-plated contact surfaces on request • Rated current related to rated cross-section and min. No. of poles. • P on drg. = pitch • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.

E.18

16 14 12 10 8 6 4 2 0

Ambient temperature T [°C]

Rated voltage Rated impulse voltage

Load current I [A]

Order No. 1604770000 1604780000 1604790000 1604800000 1604810000 1604820000 1604830000 1604840000 1604850000 1604860000 1604870000 1604880000 1604890000 1604900000 1604910000 1621400000 1621410000 1621420000 1621430000 1621440000 1621450000 1621460000 1621470000

Order No.

Male connectors with solder connection

Accessories SL 3.5/180F

Signals & data 3.50 mm pitch

SL 3.5/180G

Possible colors Additional colours on request L1+3xP

L1 P

7,5 0.295" 11,1 0.437"

7.5 0.295" 11.1 0.437"

L1+P+1.4 L1+P+0.055"

L1+2xP L1 P

3.5 0.138" 1.3+0.1 0.051"

3,5 0.138" 1,3+0,1 0.051" 2,3 0.091"

Ordering data Solder pin length Colour of plastic

Coding

L1+2xP

See chapter accessories

Ordering data 3.2 mm orange

Solder pin length Colour of plastic

3.2 mm orange

Locking lever See chapter accessories

Marking strips See chapter accessories

Pitch 3.50 mm Order No. 1604470000 1604480000 1604490000 1604500000 1604510000 1604520000 1604530000 1604540000 1604550000 1604560000 1604570000 1604580000 1604590000 1604600000 1604610000 1621790000 1621800000 1621810000 1621820000 1621830000 1621840000 1621850000 1621860000

Order No.

Order No. 1607500000 1607510000 1607520000 1607530000 1607540000 1607550000 1607560000 1607570000 1607580000 1607590000 1607600000 1607610000 1607620000 1607630000 1607640000 1622180000 1622190000 1622200000 1622210000 1622220000 1622230000 1622240000 1622250000

Order No.

E.19

Male connectors with solder connection

SL 3.5/135

Derating curve

Signals & data 3.50 mm pitch

SL 3.5/135F

L1+3xP

13,2 0.519"

• 250 V (IEC) / 300 V (UL) • 15 A (IEC) / 10 A (UL)

18 16 14 12 10 8 6 4 2 0

Conductor current to EN 60947-7-1

min. No. of poles (2-pole)

6,8 0.268"

max. No. of poles (24-pole)

1,3 +0,1 0.051" 0

13 0.513"

Angled male connector (135° outlet direction) for wave soldering method at 3.5 mm pitch. The male connector is available in a flange version. The male connectors provide space for labelling and can be coded. Packaged in cardboard box.

Load current I [A]

SL3.5/135 / BL180 / H07V-K1.5

10 20 30 40 50 60 70 80 90 100 110 Ambient temperature T [°C]

Technical data

SL3.5/135 / BL180 / H05V-K0.5

Rated current at ambient temperature Overvoltage category Pollution severity

min. No. of poles (2-pole)

Ordering data Solder pin length Colour of plastic

3.2 mm orange

Conductor current to EN 60947-7-1

max. No. of poles (24-pole)

V kV

20°C 15

10 20 30 40 50 60 70 80 90 100 110

40°C 13

III 3

III 2

II 2

160 2.5

250 2.5

a UL 1059 rated data B C D Nominal voltage V 300 300 Rated current A 10 10 AWG conductor r CSA C22.2 rated data B C D Rated voltage V 300 300 Rated current A 10 10 AWG conductor Material data Type of insulating material PBT Flammability class acc. UL94 V-0 Contact base material CuSn Material of contact surface tinned Information • Additional colours on request • Gold-plated contact surfaces on request • Rated current related to rated cross-section and min. No. of poles. • P on drg. = pitch • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.

E.20

16 14 12 10 8 6 4 2 0

Ambient temperature T [°C]

Rated voltage Rated impulse voltage

Load current I [A]

Order No. 1643330000 1643340000 1643350000 1643360000 1643370000 1643380000 1643390000 1643400000 1643410000 1643420000 1643430000 1643440000 1643450000 1643460000 1643470000 1643480000 1643490000 1643500000 1643510000 1643520000 1643530000 1643540000 1643550000

Order No.

Male connectors with solder connection

Signals & data 3.50 mm pitch

Accessories

Possible colors Additional colours on request

Coding See chapter accessories

Locking lever See chapter accessories

Marking strips See chapter accessories

E.21

Male connectors with solder connection

SLD 3.5/90

Derating curve

Signals & data 3.50 mm pitch

SLD 3.5/90G

L1+P+1.4 L1+P+0.059"

• 250 V (IEC) / 300 V (UL) • 10.5 A (IEC) / 8 A (UL)

Conductor current to EN 60947-7-1

min. No. of poles (4-pole)

max. No. of poles (48-pole)

Technical data

10 20 30 40 50 60 70 80 90 100 110

SLD3.5/90 / BL180 / H05V-K0.5 12

Rated current at ambient temperature

1.3+0.1 0.051"

Overvoltage category Pollution severity

Load current I [A]

Solder pin length Colour of plastic

3.2 mm orange

Conductor current to EN 60947-7-1

6 4 max. No. of poles (48-pole)

2 0 0

V kV

20°C 10.5

10 20 30 40 50 60 70 80 90 100 110

40°C 9

III 3

III 2

II 2

160 2.5

250 2.5

a UL 1059 rated data B C D Nominal voltage V 300 300 Rated current A 8 8 AWG conductor r CSA C22.2 rated data B C D Rated voltage V 300 300 Rated current A 8 8 AWG conductor Material data Type of insulating material PBT Flammability class acc. UL94 V-0 Contact base material CuSn Material of contact surface tinned Information • Additional colours on request • Gold-plated contact surfaces on request • Rated current related to rated cross-section and min. No. of poles. • P on drg. = pitch • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.

E.22

Ordering data

Ambient temperature T [°C]

Rated voltage Rated impulse voltage

min. No. of poles (4-pole)

7 0.276"

Ambient temperature T [°C]

10.2 0.402"

L1 P

23.3 0.917"

18 16 14 12 10 8 6 4 2 0

24.7 0.972"

5 0.197"

Double level angled male connector (90° outlet direction) for wave soldering with 3.5 mm pitch. Available in open, closed and flange versions. These male connectors provide space for labelling and can be coded. Supplied in cardboard box.

Load current I [A]

SLD3.5/90 / BL180 / H07V-K1.5

Pitch 3.50 mm PolesL1 mm 4 3.50 6 7.00 8 10.50 10 14.00 12 17.50 14 21.00 16 24.50 18 28.00 20 31.50 22 35.00 24 38.50 26 42.00 28 45.50 30 49.00 32 52.50 34 56.00 36 59.50 38 63.00 40 66.50 42 70.00 44 73.50 46 77.00 48 80.50

(inch) Qty. (0.138) 50 (0.276) 50 (0.413) 50 (0.551) 50 (0.689) 50 (0.827) 20 (0.965) 20 (1.102) 20 (1.240) 20 (1.378) 10 (1.516) 10 (1.654) 10 (1.791) 10 (1.929) 10 (2.067) 10 (2.205) 10 (2.343) 10 (2.480) 10 (2.618) 10 (2.756) 10 (2.894) 10 (3.031) 10 (3.169) 10

Order No. 1633580000 1633590000 1633600000 1633610000 1633620000 1633630000 1633640000 1633650000 1633660000 1633670000 1633680000 1633690000 1633700000 1633710000 1633720000 1633730000 1633740000 1633750000 1633760000 1633770000 1633780000 1633790000 1633800000

Order No.

Male connectors with solder connection

Accessories Signals & data 3.50 mm pitch

SLD 3.5/90F

Possible colors Additional colours on request

L1+3xP

23.3 0.917"

24.7 0.972"

10.2 0.402"

7 0.276" 5 0.197" 4.7 0.185"

L1 P

Coding 1.3+0.1 0.051"

See chapter accessories

2.3+0.1 0.091"

Ordering data Solder pin length Colour of plastic

3.2 mm orange

Marking strips See chapter accessories

Order No. 1633810000 1633820000 1633830000 1633840000 1633850000 1633860000 1633870000 1633880000 1633890000 1633900000 1633910000 1633920000 1633930000 1633940000 1633950000 1633960000 1633970000 1633980000 1633990000 1634000000 1634010000 1634020000 1634030000

Order No.

E.23

Male connectors with solder connection

SLD 3.5V 90

Derating curve

Signals & data 3.50 mm pitch

SLD 3.5V/90G

L1+P+1.4 L1+P+0.055"

• 250 V (IEC) / 300 V (UL) • 10.5 A (IEC) / 8 A (UL)

Conductor current to EN 60947-7-1

min. No. of poles (4-pole) 10.2 0.402"

L1 P

max. No. of poles (48-pole)

22 0.866"

18 16 14 12 10 8 6 4 2 0

24.2 0.953"

1.3+0.1 0.051" 11.5 0.453"

Double level angled, offset male connector (90° outlet direction) for wave soldering with 3.5 mm pitch. Available in closed and flange versions. These male connectors provide space for labelling and can be coded.

Load current I [A]

SLD3.5V90 / BL180 / H07V-K1.5

10 20 30 40 50 60 70 80 90 100 110 Ambient temperature T [°C]

Technical data

SLD3.5V90 / BL180 / H05V-K0.5 12

Load current I [A]

Overvoltage category Pollution severity

Solder pin length Colour of plastic

3.2 mm orange

Conductor current to EN 60947-7-1

6 4 max. No. of poles (48-pole)

2 0 0

V kV

20°C 10.5

10 20 30 40 50 60 70 80 90 100 110

40°C 9

III 3

III 2

II 2

160 2.5

250 2.5

a UL 1059 rated data B C D Nominal voltage V 300 300 Rated current A 8 8 AWG conductor r CSA C22.2 rated data B C D Rated voltage V 300 300 Rated current A 8 8 AWG conductor Material data Type of insulating material PBT Flammability class acc. UL94 V-0 Contact base material CuSn Material of contact surface tinned Information • Additional colours on request • Rated current related to rated cross-section and min. No. of poles. • Spacing between rows: see hole layout • P on drg. = pitch • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.

E.24

Ordering data

Ambient temperature T [°C]

Rated voltage Rated impulse voltage

min. No. of poles (4-pole)

Order No. 1642240000 1890600000 1642250000 1866770000 1642260000 1890610000 1642270000 1890620000 1642280000 1669650000 1642290000 1890630000 1642300000 1890640000 1642310000 1890650000 1642320000 1890660000 1642330000 1890670000 1642340000 1890680000 1642350000

Order No.

Male connectors with solder connection

Accessories Signals & data 3.50 mm pitch

SLD 3.5V/90F

Possible colors Additional colours on request

L1+3xP

22 0.866"

24,2 0.953"

10,2 0.402"

L1 1,3+0,1 0.051" 11,5 0.453" 4,7 0.185"

Coding 2,4+0,1 0.094"

See chapter accessories

Ordering data Solder pin length Colour of plastic

3.2 mm orange

Marking strips See chapter accessories

Pitch 3.50 mm PolesL1 mm 4 3.50 6 7.00 8 10.50 10 14.00 12 17.50 14 21.00 16 24.50 18 28.00 20 31.50 22 35.00 24 38.50 24 42.00 28 45.50 30 49.00 32 52.50 34 56.00 36 59.50 38 63.00 40 66.50 42 70.00 44 73.50 46 77.00 48 80.50

Order No. 1642370000 1890790000 1642380000 1890800000 1642390000 1890810000 1642400000 1890820000 1642410000 1669660000 1642420000 1890830000 1642430000 1890840000 1642440000 1890850000 1642450000 1890860000 1642460000 1890870000 1642470000 1890880000 1642480000

Order No.

E.25

Male connectors with solder connection

SLD 3.5V 180

Derating curve

Signals & data 3.50 mm pitch

SLD 3.5V/180G

L1+P+1,4 L1+P+0.055"

• 250 V (IEC) / 300 V (UL) • 10.5 A (IEC) / 8 A (UL)

18 16 14 12 10 8 6 4 2 0

min. No. of poles (4-pole) 5 0.197"

L1 P 2,3+0,1 0.091"

max. No. of poles (48-pole)

24,2 0.953"

Conductor current to EN 60947-7-1

22 0.866"

13,5 0.531"

Double level offset male connector (180° outlet direction) for wave soldering with 3.5 mm pitch. Available in closed and flange versions. These male connectors provide space for labelling and can be coded.

Load current I [A]

SLD3.5V180 / BL180 / H07V-K1.5

10 20 30 40 50 60 70 80 90 100 110

1,3+0,1 0.051"

Ambient temperature T [°C]

Technical data

SLD3.5V180 / BL180 / H05V-K0.5 12

Load current I [A]

Overvoltage category Pollution severity

Solder pin length Colour of plastic

3.2 mm orange

Conductor current to EN 60947-7-1

6 4 max. No. of poles (48-pole)

2 0 0

V kV

20°C 10.5

10 20 30 40 50 60 70 80 90 100 110

40°C 9

III 3

III 2

II 2

160 2.5

250 2.5

a UL 1059 rated data B C D Nominal voltage V 300 300 Rated current A 8 8 AWG conductor r CSA C22.2 rated data B C D Rated voltage V 300 300 Rated current A 8 8 AWG conductor Material data Type of insulating material PBT Flammability class acc. UL94 V-0 Contact base material CuSn Material of contact surface tinned Information • Additional colours on request • Rated current related to rated cross-section and min. No. of poles. • Spacing between rows: see hole layout • P on drg. = pitch • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.

E.26

Ordering data

Ambient temperature T [°C]

Rated voltage Rated impulse voltage

min. No. of poles (4-pole)

(inch) Qty. (0.138) 50 (0.276) 50 (0.413) 50 (0.551) 50 (0.689) 50 (0.827) 20 (0.965) 20 (1.102) 20 (1.240) 20 (1.378) 20 (1.516) 10 (1.654) 10 (1.791) 10 (1.929) 10 (2.067) 10 (2.205) 10 (2.343) 10 (2.480) 10 (2.618) 10 (2.756) 10 (2.894) 10 (3.031) 10 (3.169) 10

Order No. 1641110000 1891190000 1641120000 1891200000 1641130000 1891210000 1641140000 1891220000 1641150000 1891230000 1641160000 1891240000 1641170000 1891250000 1641180000 1891260000 1641190000 1891270000 1641200000 1891280000 1641210000 1891290000 1641220000

Order No.

Male connectors with solder connection

Accessories Signals & data 3.50 mm pitch

SLD 3.5V/180F

Possible colors L1+2xP

Additional colours on request

24,2 0.953"

22 0.866"

5 0.197"

L1+2xP L1 P

13,5 0.531"

2,3+0,1 0.091"

Coding See chapter accessories

1,3+0,1 0.051"

Ordering data Solder pin length Colour of plastic

3.2 mm orange

Marking strips See chapter accessories

Order No. 1641240000 1891060000 1641250000 1891070000 1641260000 1891080000 1641270000 1891090000 1641280000 1891100000 1641290000 1891110000 1641300000 1891120000 1641310000 1891130000 1641320000 1891140000 1641330000 1891150000 1641340000 1891160000 1641350000

Order No.

E.27

Socket connectors with clamping yoke connection

BL 3.5/180

Derating curve

Signals & data 3.50 mm pitch

BL 3.5/180

• 0.2 - 1.5 mm2 (IEC) / 28 - 14 AWG (UL) • 250 V (IEC) / 300 V (UL) • 17 A (IEC) / 10 A (UL)

20 18 16 14 12 10 8 6 4 2 0

L1+P

18,5 0.728"

Conductor current to EN 60947- 7-1

13 0.512"

min. No. of poles (2-pole)

max. No. of poles (24-pole)

L1 0

10,6 0.417"

10 20 30 40 50 60 70 80 90 100 110 Ambient temperature T [°C]

Technical data

SL3.5/90 / BL180 / H05V-K0.5

Load current I [A]

0.2…1.5 0.2…1.5 0.2…1.5 6 0.4 x 2.5 DIN 5264 0.2...0.25

min. No. of poles (2-pole)

Ordering data Solder pin length Colour of plastic

orange

black

Order No. 1597360000 1597370000 1597380000 1597390000 1597400000 1597410000 1597420000 1597430000 1597440000 1597450000 1597460000 1597470000 1597480000 1597490000 1597500000 1620290000 1620300000 1620310000 1620320000 1620330000 1620340000 1620350000 1620360000

Order No. 1615670000 1615680000 1615690000 1614090000 1610180000 1610190000 1615700000 1615710000 1610200000 1615720000 1615730000 1615740000 1615750000 1615760000 1615770000 1620370000 1620380000 1620390000 1620400000 1620410000 1620420000 1620430000 1620440000

Conductor current to EN 60947- 7-1

max. No. of poles (24-pole)

V kV

20°C 17

10 20 30 40 50 60 70 80 90 100 110

40°C 14.5

III 3

III 2

II 2

160 2.5

250 2.5

a UL 1059 rated data B C D Nominal voltage V 300 300 Rated current A 10 10 AWG conductor 28-14 r CSA C22.2 rated data B C D Rated voltage V 300 300 Rated current A 10 10 AWG conductor 28-14 Material data Type of insulating material PBT Flammability class acc. UL94 V-0 Contact base material Cu alloy Material of contact surface tinned Information • Additional colours on request • Gold-plated contact surfaces on request • Rated current related to rated cross-section and min. No. of poles. • Max. O.D. of conductor: 2.9 mm • Wire end ferrule without plastic collar to DIN 46228 pt 1 • Wire end ferrule with plastic collar to DIN 46228 pt 4 • P on drg. = pitch • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.

SL3.5/135 / BL180 / H07V-K1.5 Load current I [A]

Overvoltage category Pollution severity

E.28

16 14 12 10 8 6 4 2 0

Ambient temperature T [°C]

Rated voltage Rated impulse voltage

0.08…1.5 0.2…1.5

18 16 14 12 10 8 6 4 2 0

Conductor current to EN 60947-7-1

min. No. of poles (2-pole)

max. No. of poles (24-pole)

10 20 30 40 50 60 70 80 90 100 110 Ambient temperature T [°C]

SL3.5/135 / BL180 / H05V-K0.5 Load current I [A]

Load current I [A]

SL3.5/90 / BL180 / H07V-K1.5 Socket connectors with clamping yoke 180° screw connection for conductor connection with direction at 3.5 mm pitch. The socket connectors are also available with flange. They provide space for labelling and can be coded.

16 14 12 10 8 6 4 2 0

min. No. of poles (2-pole)

Conductor current to EN 60947-7-1

max. No. of poles (24-pole)

10 20 30 40 50 60 70 80 90 100 110 Ambient temperature T [°C]

Socket connectors with clamping yoke connection

Accessories BL 3.5/180LH

Signals & data 3.50 mm pitch

BL 3.5/180F

Possible colors Additional colours on request

L1+3xP

16,48 0.648"

13 0.512" P

10,6 0.417"

18,5 0.728"

L1+P+6, 5 L1+P+0.393 "

18,5 0.728"

10,6 0.417"

Coding See chapter accessories

Ordering data Solder pin length Colour of plastic

Ordering data orange

black

Solder pin length Colour of plastic

orange

black

Hood See chapter accessories

Cable grip See chapter accessories

Pitch 3.50 mm Order No. 1606640000 1606650000 1606660000 1606670000 1606680000 1606690000 1606700000 1606710000 1606720000 1606730000 1606740000 1606750000 1606760000 1606770000 1606780000 1620760000 1620770000 1620780000 1620790000 1620800000 1620810000 1620820000 1620830000

Order No. 1615780000 1615790000 1615800000 1615810000 1615820000 1615830000 1615840000 1615850000 1615860000 1615870000 1615880000 1615890000 1615900000 1615910000 1615920000 1620840000 1620850000 1620860000 1620870000 1620880000 1620890000 1620900000 1620910000

Order No. 1687650000 1687660000 1687670000 1687680000 1687690000 1687700000 1687710000 1687720000 1687730000 1687740000 1687750000 1687760000 1687770000 1687780000 1687790000 1687800000 1687810000 1687820000 1687830000 1687840000 1687850000 1687860000 1687870000

Order No. 1687880000 1687890000 1687900000 1687910000 1687920000 1687930000 1687940000 1687950000 1687960000 1687970000 1687980000 1687990000 1688000000 1688010000 1688020000 1688030000 1688040000 1688050000 1688060000 1688070000 1688080000 1688090000 1688100000

Marking strips See chapter accessories

E.29

Socket connectors with clamping yoke connection

BL 3.5/90

Derating curve

Signals & data 3.50 mm pitch

BL 3.5/90

12 0.472"

L1+P

min. No. of poles (2-pole)

max. No. of poles (24-pole)

10 20 30 40 50 60 70 80 90 100 110

P L1

Ambient temperature T [°C]

Technical data

SL3.5/90 / BL270 / H05V-K0.5 12

0.2…1.5 0.2…1.5 0.2…1.5 6 0.4 x 2.5 DIN 5264 0.2...0.25

Ordering data Solder pin length Colour of plastic

orange

black

Order No. 1638550000 1638560000 1638570000 1638580000 1638590000 1638600000 1638610000 1638620000 1638630000 1638640000 1638650000 1638660000 1638670000 1638680000 1638690000 1638700000 1638710000 1638720000 1638730000 1638740000 1638750000 1638760000 1638770000

Order No. 1638780000 1638790000 1638800000 1638810000 1638820000 1638830000 1638840000 1638850000 1638860000 1638870000 1638880000 1638890000 1638900000 1638910000 1638920000 1638930000 1638940000 1638950000 1638960000 1638970000 1638980000 1638990000 1639000000

Conductor current to EN 60947-7-1

8 6 4 max. No. of poles (24-pole)

2 0 0

V kV

20°C 12

10 20 30 40 50 60 70 80 90 100 110

40°C 10

III 3

III 2

II 2

160 2.5

250 2.5

a UL 1059 rated data B C D Nominal voltage V 300 300 Rated current A 8 8 AWG conductor 28-14 r CSA C22.2 rated data B C D Rated voltage V 300 300 Rated current A 10 10 AWG conductor 28-14 Material data Type of insulating material PBT Flammability class acc. UL94 V-0 Contact base material Cu alloy Material of contact surface tinned Information • Additional colours on request • Gold-plated contact surfaces on request • Rated current related to rated cross-section and min. No. of poles. • Max. O.D. of conductor: 2.9 mm • Wire end ferrule without plastic collar to DIN 46228 pt 1 • Wire end ferrule with plastic collar to DIN 46228 pt 4 • P on drg. = pitch • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.

E.30

min. No. of poles (2-pole)

Ambient temperature T [°C]

Rated voltage Rated impulse voltage

0.08…1.5 0.2…1.5

14.6 0.575"

Conductor current to EN 60947- 7-1

Load current I [A]

• 0.2 - 1.5 mm2 (IEC) / 28 - 14 AWG (UL) • 250 V (IEC) / 300 V (UL) • 12 A (IEC) / 8 A (UL)

18 16 14 12 10 8 6 4 2 0

22.45 0.884"

Socket connectors with clamping yoke screw connection for conductor connection with angled outlet direction (90°) at 3.5 mm pitch. The socket connectors are also available with flange. They provide space for labelling and can be coded.

Load current I [A]

SL3.5/90 / BL270 / H07V-K1.5

Socket connectors with clamping yoke connection

Accessories Signals & data 3.50 mm pitch

BL 3.5/90F

Possible colors Additional colours on request L1+3xP

14.6 0.575"

22.45 0.884"

12 0.472"

Coding

See chapter accessories

Ordering data Solder pin length Colour of plastic

orange

black

Marking strips See chapter accessories

Order No. 1639010000 1639020000 1639030000 1639040000 1639050000 1639060000 1639070000 1639080000 1639090000 1639100000 1639110000 1639120000 1639130000 1639140000 1639150000 1639160000 1639170000 1639180000 1639190000 1639200000 1639210000 1639220000 1639230000

Order No. 1639240000 1639250000 1639260000 1639270000 1639280000 1639290000 1639300000 1639310000 1639320000 1639330000 1639340000 1639350000 1639360000 1639370000 1639380000 1639390000 1639400000 1639410000 1639420000 1639430000 1639440000 1639450000 1639460000

E.31

Socket connectors with clamping yoke connection

BL 3.5/270

Derating curve

Signals & data 3.50 mm pitch

BL 3.5/270

L1+P

12 0.472"

min. No. of poles (2-pole)

max. No. of poles (24-pole)

10 20 30 40 50 60 70 80 90 100 110

Ambient temperature T [°C]

Technical data

SL3.5/90 / BL270 / H05V-K0.5 12

0.2…1.5 0.2…1.5 0.2…1.5 6 0.4 x 2.5 DIN 5264 0.2...0.25

Ordering data Solder pin length Colour of plastic

orange

black

Order No. 1639470000 1639480000 1639490000 1639500000 1639510000 1639520000 1639530000 1639540000 1639550000 1639560000 1639570000 1639580000 1639590000 1639600000 1639610000 1639620000 1639630000 1639640000 1639650000 1639660000 1639670000 1639680000 1639690000

Order No. 1639700000 1639710000 1639720000 1639730000 1639740000 1639750000 1639760000 1639770000 1639780000 1639790000 1639800000 1639810000 1639820000 1639830000 1639840000 1639850000 1639860000 1639870000 1639880000 1639890000 1639900000 1639910000 1639920000

Conductor current to EN 60947-7-1

8 6 4 max. No. of poles (24-pole)

2 0 0

V kV

20°C 12

10 20 30 40 50 60 70 80 90 100 110

40°C 10

III 3

III 2

II 2

160 2.5

250 2.5

E.32

min. No. of poles (2-pole)

Ambient temperature T [°C]

Rated voltage Rated impulse voltage

0.08…1.5 0.2…1.5

14.6 0.575"

Conductor current to EN 60947- 7-1

Load current I [A]

• 0.2 - 1.5 mm2 (IEC) / 28 - 14 AWG (UL) • 250 V (IEC) / 300 V (UL) • 12 A (IEC) / 8 A (UL)

18 16 14 12 10 8 6 4 2 0

22.55 0.888"

Socket connectors with clamping yoke screw connection for conductor connection with angled outlet direction (270°) at 3.5 mm ptich. The socket connectors are also available with flange. They provide space for labelling and can be coded.

Load current I [A]

SL3.5/90 / BL270 / H07V-K1.5

Socket connectors with clamping yoke connection

Accessories Signals & data 3.50 mm pitch

BL 3.5/270F

Possible colors Additional colours on request 12 0.472"

14.6 0.575"

22.55 0.888"

L1+3xP

P L1

Coding See chapter accessories

Ordering data Solder pin length Colour of plastic

orange

black

Marking strips See chapter accessories

Order No. 1639930000 1639940000 1639950000 1639960000 1639970000 1639980000 1639990000 1640000000 1640010000 1640020000 1640030000 1640040000 1640050000 1640060000 1640070000 1640080000 1640090000 1640100000 1640110000 1640120000 1640130000 1640140000 1640150000

Order No. 1640160000 1640170000 1640180000 1640190000 1640200000 1640210000 1640220000 1640230000 1640240000 1640250000 1640260000 1640270000 1640280000 1640290000 1640300000 1640310000 1640320000 1640330000 1640340000 1640350000 1640360000 1640370000 1640380000

E.33

Socket connectors with tension clamp connection

BLZF 3.5/180

Derating curve

Signals & data 3.50 mm pitch

BLZF 3.5/180

• 0.2 - 1.5 mm2 (IEC) / 26 - 14 AWG (UL) • 250 V (IEC) / 300 V (UL) • 14.5 A (IEC) / 10 A (UL)

18 16 14 12 10 8 6 4 2 0

L1+P

Conductor current to EN 60947-7-1

max. No. of poles (24-pole)

21,9 0.862" 13 0.512"

min. No. of poles (2-pole)

14 0.551"

L1 0

10 20 30 40 50 60 70 80 90 100 110 Ambient temperature T [°C]

Technical data

SL3.5/90 / BLZF180 / H05V-K0.5

0.13…1.5 0.2…1.5

Overvoltage category Pollution severity

0.2…1.5 0.2…1.5 0.2…1 10 0.4 x 2.5 DIN 5264-A

Solder pin length Colour of plastic

orange

black

Order No. 1690190000 1690200000 1690210000 1690220000 1690230000 1690240000 1690250000 1690260000 1690270000 1690280000 1690290000 1690300000 1690310000 1690320000 1690330000 1690340000 1690350000 1690360000 1690370000 1690380000 1690390000 1690400000 1690410000

Order No. 1690420000 1690430000 1690440000 1690450000 1690460000 1690470000 1690480000 1690490000 1690500000 1690510000 1690520000 1690530000 1690540000 1690550000 1690560000 1690570000 1690580000 1690590000 1690600000 1690610000 1690620000 1690630000 1690640000

10 Conductor current to EN 60947-7-1

8 6 4

max. No. of poles (24-pole)

2 0 0

V kV

20°C 14.5

10 20 30 40 50 60 70 80 90 100 110

40°C 12

III 3

III 2

II 2

160 2.5

250 2.5

a UL 1059 rated data B C D Nominal voltage V 300 300 Rated current A 10 10 AWG conductor 26-14 r CSA C22.2 rated data B C D Rated voltage V 300 300 Rated current A 10 10 AWG conductor 26-14 Material data Type of insulating material PBT Flammability class acc. UL94 V-0 Contact base material Cu alloy Material of contact surface tinned Information • Additional colours on request • Gold-plated contact surfaces on request • Rated current related to rated cross-section and min. No. of poles. • Max. O.D. of conductor: 2.9 mm • Wire end ferrule without plastic collar to DIN 46228 pt 1 • Wire end ferrule with plastic collar to DIN 46228 pt 4 • Crimp form A for wire end ferrules with PZ1.5 or PZ 6/5 crimping tool are recommended for the largest cable sizes. • P on drg. = pitch • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.

E.34

min. No. of poles (2-pole)

Ordering data

Ambient temperature T [°C]

Rated voltage Rated impulse voltage

14 Load current I [A]

Load current I [A]

SL3.5/90 / BLZF180 / H07V-K1.5 Socket connectors for conductor connection in tension clamp system with 180° outlet direction and 3.5 mm pitch. The socket connectors are also available with flange. They provide space for labelling and can be coded.

Socket connectors with tension clamp connection

Accessories BLZF 3.5/180LH

Signals & data 3.50 mm pitch

BLZF 3.5/180F

Possible colors Additional colours on request

21.9 0.862"

L1+P+6.5 L1+P+0.256" 16.4 0.646"

13 0.512"

21,9 0.862"

14 0.551"

13 0.512"

L1+3xP

14 0.551"

Coding See chapter accessories

Ordering data Solder pin length Colour of plastic

Ordering data orange

black

Solder pin length Colour of plastic

orange

black

Cable grip See chapter accessories

Marking strips See chapter accessories

Pitch 3.50 mm Order No. 1690880000 1690890000 1690900000 1690910000 1690920000 1690930000 1690940000 1690950000 1690960000 1690970000 1690980000 1690990000 1691000000 1691010000 1691020000 1691030000 1691040000 1691050000 1691060000 1691070000 1691080000 1691090000 1691100000

Order No. 1691110000 1691120000 1691130000 1691140000 1691150000 1691160000 1691170000 1691180000 1691190000 1691200000 1691210000 1691220000 1691230000 1691240000 1691250000 1691260000 1691270000 1691280000 1691290000 1691300000 1691310000 1691320000 1691330000

Order No. 1691570000 1691580000 1691590000 1691600000 1691610000 1691620000 1691630000 1691640000 1691650000 1691660000 1691670000 1691680000 1691690000 1691700000 1691710000 1691720000 1691730000 1691740000 1691750000 1691760000 1691770000 1691780000 1691790000

Order No. 1691800000 1691810000 1691820000 1691830000 1691840000 1691850000 1691860000 1691870000 1691880000 1691890000 1691900000 1691910000 1691920000 1691930000 1691940000 1691950000 1691960000 1691970000 1691980000 1691990000 1692000000 1692010000 1692020000

Screwdriver See chapter accessories Order No. 9009030000

E.35

Socket connectors with IDC

BLIDCB 3.5

Derating curve

Signals & data 3.50 mm pitch

BLIDCB 3.5 Bus version

SL 3.5/90 / BLIDCB / H05V-K0.5 12

L1+P

Conductor current to EN 60947-7-1

6 4

max. No. of poles (8-pole)

• 0.35 - 0.5 mm2 (IEC) / 22 - 20 AWG (UL) • 250 V (IEC) / 300 V (UL) • 6 A (IEC) / 7 A (UL)

21,2 0.835

min. No. of poles (2-pole)

12,5 0.492"

Load current I [A]

Socket connectors for fast wiring with IDC system for conductor connection at 3.5 mm pitch in bus applications. The socket connectors are also available with flange. They provide space for labelling and can be coded.

13,3 0.524"

0 0

Ambient temperature T [°C]

Technical data

Ordering data

V kV

Solder pin length Colour of plastic

0.32…0.5 0.35…0.5

black

Order No. 1751380000 1751390000 1751400000 1751410000 1751420000 1751430000 1751440000

Order No. 1770670000 1770680000 1770690000 1770700000 1770710000 1770720000 1770730000

0.35…0.5

0.4 x 2.5 DIN 5264-A

20°C 6

40°C 6

III 3

III 2

II 2

160 2.5

250 2.5

a UL 1059 rated data B C D Nominal voltage V 300 300 Rated current A 7 7 AWG conductor 22-20 r CSA C22.2 rated data B C D Rated voltage V 300 300 Rated current A 7 7 AWG conductor 22-20 Material data Type of insulating material PBT Flammability class acc. UL94 V-0 Contact base material CuSn Material of contact surface tinned Information • Additional colours on request • Rated current related to rated cross-section and min. No. of poles. • for IDC contact 0.5: conductor to DIN EN 60352 pt 4 • AWG conductor: solid, 7 or 19 strands only • Temperature range -20 to +80°C • BLIDC 3.5 and BLIDCB 3.5 conductors solid/flexible to DIN 47726 • P on drg. = pitch • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.

E.36

orange

Pitch 3.50 mm PolesL1 mm 2 3.50 3 7.00 4 10.50 5 14.00 6 17.50 7 21.00 8 24.50

(inch) Qty. (0.138) 10 (0.276) 10 (0.413) 10 (0.551) 10 (0.689) 10 (0.827) 10 (0.965) 10

Socket connectors with IDC

Accessories Signals & data 3.50 mm pitch

BLIDCB 3.5F Bus version

Possible colors Additional colours on request

L1+2xP+3, 2 L1+2xP+0.126" 12,5 0.492"

21,2 0.835"

13,3 0.524"

Coding See chapter accessories

Ordering data Solder pin length Colour of plastic

orange

black

Mounting block See chapter accessories

Marking strips See chapter accessories

Pitch 3.50 mm PolesL1 mm 2 3.50 3 7.00 4 10.50 5 14.00 6 17.50 7 21.00 8 24.50

(inch) Qty. (0.138) 10 (0.276) 10 (0.413) 10 (0.551) 10 (0.689) 10 (0.827) 10 (0.965) 10

Order No. 1751450000 1751460000 1751470000 1751480000 1751490000 1751500000 1751510000

Order No. 1770740000 1770750000 1770760000 1770770000 1770780000 1770790000 1770800000

Screwdriver See chapter accessories Order No. 9008370000

E.37

Socket connectors with Push In connection for decentralised I/O electronics

BL-I/O 3.5 F

Derating curve

Signals & data 3.50 mm pitch

BL-I/O 3.5/30F

5 4.5 4 3.5 3 2.5 2 1.5 1 0.5 0

No. of poles (10-pole)

42 1.654"

27 1.063" 18.4 0.724"

• 0.2 - 1.5 mm2 (IEC) / 22 - 16 AWG (UL) • 50 V (IEC) / 50 V (UL) • 2.2 A (IEC) / 5 A (UL)

Load current I [A]

BL-I/O / H07V-K1.5 Socket connector as plug-in connection level for decentralised I/O electronics; used in conjunction with male connectors with 3.5 mm pitch.

19.3 0.76"

10 20 30 40 50 60 70 80 90 100 110 Ambient temperature T [°C]

Technical data

BL-I/O / H07V-K1.5

Load current I [A]

0.2…1.5 0.2…1.5 0.2…1.5 8 0.4 x 2.5 DIN 5264

A Overvoltage category Pollution severity

V kV

20°C 2.2

Solder pin length Colour of plastic

grey

black

Order No. 1965910000

Order No. 1779920000

10 20 30 40 50 60 70 80 90 100 110

40°C 2.2

III 3

III 2

II 2

50 0.8

160 2.5

200 2.5

a UL 1059 rated data B C D Nominal voltage V 50 50 Rated current A 5 5 AWG conductor 22-16 r CSA C22.2 rated data B C D Rated voltage V 50 50 Rated current A 5 5 AWG conductor 22-16 Material data Type of insulating material PBT Flammability class acc. UL94 V-0 Contact base material Cu alloy Material of contact surface tinned Information • LED operating voltage 10 - 30 V • UL approval values for factory wiring • Crimp form A for wire end ferrules with PZ 6/5 crimping tool are recommended for the largest cable sizes. • Total current-carrying capacity of potential bridge max. 10 A when connected with 1.5mm2 flexible 17.5 A (results in a current-carrying capacity of 2.18 A for poles 2-9) • Wire end ferrule without plastic collar to DIN 46228 pt 1 • Wire end ferrule with plastic collar to DIN 46228 pt 4 • Conductor <0.2 mm2 tinned • Max. O.D. of conductor: 2.9 mm • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.

E.38

No. of poles (30-pole)

Ordering data

Ambient temperature T [°C]

Rated current at ambient temperature

Rated voltage Rated impulse voltage

0.2…1.5 0.2…1.5

5 4.5 4 3.5 3 2.5 2 1.5 1 0.5 0

Pitch 3.50 mm PolesL1 mm (inch) Qty. 30 31.50 (1.240) 20

Socket connectors with Push In connection for decentralised I/O electronics

BL I/O 3.5

BL I/O 3.5 30-pole • The plug-in connection level for decentralised I/O electronics • Directly from the controller or industrial PC etc. to the sensor/actuator level • Significantly less space plus a reduced design workload and less subsequent cabling work Possible colors Additional colours on request

27 1.063"

Wiring diagram for 30-pole BL I/O with 10-pole SL 3.5 • Direct connection options for sensors and actuators, including voltage supply • Can be used for internal or external supply options

10.3 0.406"

42 1.654"

Signals & data 3.50 mm pitch

Accessories BL-I/O 3.5/10F

19 0.748"

Coding See chapter accessories

Ordering data Solder pin length Colour of plastic

grey

black

blue

red

grey

Pitch 3.50 mm PolesL1 mm (inch) Qty. 10 31.50 (1.240) 20

Order No. 1871690000

Order No. 1779880000

E.39

Socket connectors with Push In connection for decentralised I/O electronics

BL-I/O 3.5 F PNP LED

Derating curve

Signals & data 3.50 mm pitch

BL-I/O 3.5/30F PNP LED

• 0.2 - 1.5 mm2 (IEC) / 22 - 16 AWG (UL) • 50 V (IEC) / 50 V (UL) • 2.2 A (IEC) / 5 A (UL)

5 4.5 4 3.5 3 2.5 2 1.5 1 0.5 0

42 1.654"

Base curve

Limit value of 17.5 at the outer poles corresponds to 2.18 A for poles 2-8.

27 1.063" 20.8 0.819"

Load current I [A]

BL-I/O / 10-pole 24 V Socket connector as plug-in connection level with common negative pole for decentralised I/O electronics with integral LED indicator; used in conjunction with male connectors with 3.5 mm pitch.

Derating curve

19.3 0.76"

10 20 30 40 50 60 70 80 90 100 110 Ambient temperature T [°C]

Technical data Load current I [A]

0.2…1.5 0.2…1.5 0.2…1.5 0.2…1.5 0.2…1.5 8 0.4 x 2.5 DIN 5264

A Overvoltage category Pollution severity

Solder pin length Colour of plastic

grey

black

Order No. 1965970000

Order No. 1789110000

Base curve Limit value 17.5 A at the outer poles of the male connector corresponds to 2.18 A for poles 2-8. The same applies to the voltage buses. Derating curve

0 20°C 2.2

10 20 30 40 50 60 70 80 90 100 110

III 3 V kV

40°C 2.2 III 2

II 2

50 0.8

E.40

5 4.5 4 3.5 3 2.5 2 1.5 1 0.5 0

Ambient temperature T [°C]

Rated current at ambient temperature

Rated voltage Rated impulse voltage

Ordering data

BL-I/O / 30-pole 24 V

Pitch 3.50 mm PolesL1 mm (inch) Qty. 30 31.50 (1.240) 20

Socket connectors with Push In connection for decentralised I/O electronics

BL I/O 3.5 LED PNP

Signals & data 3.50 mm pitch

Accessories BL-I/O 3.5/10F PNP LED

Possible colors Additional colours on request

27 1.063" 12.7 0.5"

42 1.654"

19 0.748"

Coding See chapter accessories

Ordering data Solder pin length Colour of plastic

grey

black

Integral LED version • Optimum availability for all BL I/Os • Testing of the sensor/actuator wiring prior to releasing the control into operation • No functional indications required in the housing Wiring diagram for 30-pole PNP BL I/O with 10-pole SL 3.5 • Direct connection options for sensors and actuators, including voltage supply • Can be used for internal or external supply options PNP

Pitch 3.50 mm PolesL1 mm (inch) Qty. 10 31.50 (1.240) 20

Order No. 1965940000

Order No. 1789090000

blue

red

grey

E.41

Socket connectors with Push In connection for decentralised I/O electronics

BL-I/O 3.5 F NPN LED

Derating curve

Signals & data 3.50 mm pitch

BL-I/O 3.5/30F NPN LED

• 0.2 - 1.5 mm2 (IEC) / 22 - 16 AWG (UL) • 50 V (IEC) / 50 V (UL) • 2.2 A (IEC) / 5 A (UL)

5 4.5 4 3.5 3 2.5 2 1.5 1 0.5 0

42 1.654"

Base curve

Limit value of 17.5 at the outer poles corresponds to 2.18 A for poles 2-8.

27 1.063" 20.8 0.819"

Load current I [A]

BL-I/O / 10-pole 24 V Socket connector as plug-in connection level with common positive pole for decentralised I/O electronics with integral LED indicator; used in conjunction with male connectors with 3.5 mm pitch.

Derating curve

19.3 0.76"

10 20 30 40 50 60 70 80 90 100 110 Ambient temperature T [°C]

Technical data Load current I [A]

0.2…1.5 0.2…1.5 0.2…1.5 0.2…1.5 0.2…1.5 8 0.4 x 2.5 DIN 5264

A Overvoltage category Pollution severity

Solder pin length Colour of plastic

grey

black

Order No. 1965980000

Order No. 1938020000

Base curve Limit value 17.5 A at the outer poles of the male connector corresponds to 2.18 A for poles 2-8. The same applies to the voltage buses. Derating curve

0 20°C 2.2

10 20 30 40 50 60 70 80 90 100 110

III 3 V kV

40°C 2.2 III 2

II 2

50 0.8

E.42

5 4.5 4 3.5 3 2.5 2 1.5 1 0.5 0

Ambient temperature T [°C]

Rated current at ambient temperature

Rated voltage Rated impulse voltage

Ordering data

BL-I/O / 30-pole 24 V

Pitch 3.50 mm PolesL1 mm (inch) Qty. 30 31.50 (1.240) 20

Socket connectors with Push In connection for decentralised I/O electronics

BL I/O 3.5 LED NPN

Signals & data 3.50 mm pitch

Accessories BL-I/O 3.5/10F NPN LED

Possible colors Additional colours on request

27 1.063" 12.7 0.5"

42 1.654"

19 0.748"

Coding See chapter accessories

Ordering data Solder pin length Colour of plastic

grey

black

Integral LED version • Optimum availability for all BL I/Os • Testing of the sensor/actuator wiring prior to releasing the control into operation • No functional indications required in the housing Wiring diagram for 30-pole NPN BL I/O with 10-pole SL 3.5 • Direct connection options for sensors and actuators, including voltage supply • Can be used for internal or external voltage supply options NPN

LED

SL 3.5/10

red

grey

blue

Pitch 3.50 mm PolesL1 mm (inch) Qty. 10 31.50 (1.240) 20

Order No. 1965950000

Order No. 1938010000

NPN

blue

red

E.43

E.44

Signals & data 3.50 mm pitch