4_5_5_1158070000_CAT4-3_E_EN

IP 65 switched-mode power supply / Electrical-cabinet socket outlet IP 65 switched-mode power supply / Electrical-cabinet socket outlet

IP 65 switched-mode power supply

E.2

Electrical-cabinet socket outlet

E.6

IP 65 switched-mode power supply / Electrical-cabinet socket outlet

Contents

E

E.1

IP 65 switched-mode power supply / Electrical-cabinet socket outlet

IP 65 switched-mode power supply – Overview

FieldPower® – decentralized switched-mode power supply

Close-to-load 24 V power generation and distribution for decentralized DC-systems Decentralized 24 VDC power systems are much more energy efficient with the new „PowerBox 10P SNT“ power supply unit.

E

Decentralized 24 VDC loads can cause voltage drops. The loads then experience voltage fluctuations and detrimental power loss can occur on the cables. This results in a less reliable DC power supply and reduced energy efficiency. Large copper crosssections (e.g. 16mm²) can be used to counteract these tendencies, but they require additional time and expenses.

E.2

The new „PowerBox 10P SNT“ power supply unit from Weidmüller‘s FieldPower® line offers a superior solution. Decentralized 24 VDC power systems that use this new power supply operate with significantly improved energy efficiency. The reduced voltage drop results in less transmission-related losses – even with copper-optimized installations. A constant voltage level throughout the system means that there will be fewer system outages.

FieldPower® is a comprehensive product line that provides decentralized power distribution for machines, industrial plants, automotive manufacturing, or wherever power must be distributed over long distances. FieldPower® products are simple and easy to install; this provides you with more flexible commissioning, easier maintenance and more rapid project scheduling.

IP 65 switched-mode power supply / Electrical-cabinet socket outlet

IP 65 switched-mode power supply – Overview

Reliable The three-phase power supply functions even when there is a loss of one phase.

The inrush-current limiting function prevents the group protective unit from being triggered.

High availability The Powerboost permits loading and starting currents. LEDs and a relay contact can warn of a load-related event.

E

Robust The power supply unit is resistant to vibrations. It features an impact-resistant housing with IP 65 protection.

Compatible with DC power systems These power supplies support good teamwork. Passive and active mechanisms take advantage of multiple feeds to provide load compensation.

24 V DC

400 V AC

Simple AC and DC are handled identically.

The wire is positioned and contact is established with a simple turning movement.

IP 65 switched-mode power supply

Electrical-cabinet socket outlet

E.3

IP 65 switched-mode power supply / Electrical-cabinet socket outlet

IP 65 switched-mode power supply

PowerBox with decentralized switched-mode power supply

PowerBox 10P SNT

PowerBox 10P SNT With 4 additional M20 cable glands

•P owerBox with three-phase 24 V / 5 A switched-mode power supply.

• Close-to-load 24 V power generation and distribution for decentralized DC-systems • Reduced voltage drops for copper-optimized installations • More reliable power supply with constant voltage • Improved energy efficiency with minimal transmission-related losses

L1 L2

+

AC

L3 PE

DC

–

Basic operation is possible with two phases*

E Technical data PowerBox Rated data Rated cross-section Rated voltage / Rated current Rated impulse voltage General data

6 mm²

6 mm²

800 V / 41 A

800 V / 41 A

8 kV

8 kV

UL 94 flammability rating Ingress protection class Assembly temperature range, min. – max.

Ambient temperature (operational) IDC connection clamping capacity - power cable

5VA

5VA

IP 65 10 °C … 40 °C

IP 65 10 °C … 40 °C

-25 °C …. +50 °C

-25 °C …. +50 °C

Clamping range, min.-max.

Blade size PUSH IN connection clamping capacity - distribution

2.5 mm² … 6 mm²

2.5 mm² … 6 mm²

0.6 x 3.5 mm

0.6 x 3.5 mm

Clamping range, min.-max.

Stripping length / Blade size

0.75 mm² … 6 mm²

0.75 mm² … 6 mm²

14 mm / 0.6 x 3.5 mm

14 mm / 0.6 x 3.5 mm

Note

Refer to PT6 DC 1126840000 for additional technical clamping specifications.

Refer to PT6 DC 1126840000 for additional technical clamping specifications.

400 V AC** (3~, PE)

400 V AC** (3~, PE)

Yes

Yes

24.25 V DC ± 50 mV (23.5…28.0 V DC)

24.25 V DC ± 50 mV (23.5…28.0 V DC)

5 A @ 24 V DC 10 A, t ≤ 300 ms Yes

5 A @ 24 V DC 10 A, t ≤ 300 ms Yes

Technical data power supply Input data Rated input voltage Input fuse (internal) Output data Rated output voltage Rated output current @ Urated Powerboost @ 24 V DC, 0..5 A, ED = 10%, three-phase short-circuit-proof output power @ 24 V DC Connection data type of connection Number of terminals conductor cross-section, min.-max.

Note

120 W Input Plug-in connector

Output Plug-in connector

120 W Input Plug-in connector

Output Plug-in connector

L1, L2, L3, PE

+, +, -, -, COM ,NO

L1, L2, L3, PE

+, +, -, -, COM ,NO

0.5 mm² … 4 mm²

0.5 mm² … 4 mm²

0.5 mm² … 4 mm²

0.5 mm² … 4 mm²

* No power boost in two-phase mode or in current-limiting mode. ** UL approval and 480 V are pending.

Refer to BG SNT PT6 1101940000 for additional technical specifications on the power supply.

* No power boost in two-phase mode or in current-limiting mode. ** UL approval and 480 V are pending.

Refer to BG SNT PT6 1101940000 for additional technical specifications on the power supply.

Type PowerBox 10P SNT

Type PowerBox 10P SNT 4XVG

Ordering data

Note

Qty. 1

Order No. 1132320000

Qty. 1

Enclosure seals can be ordered separately.

Enclosure seals (3xD0, 2xD11, 2xD13, 2xD15) and PTDS 4 connector are included in delivery.

PT6 DC 1126840000 contact block

PT6 DC 1126840000 contact block

Accessories Note

E.4

Order No. 1076510000

Switched-mode power supply 24 V / 5 A

BG SNT PT6

•T hree-phase built-in 24 V/5 A power supply with high degree of efficiency.

• External heat sink reduces warming within electrical cabinet.

• Resistant to vibration – in compliance with EN 61373 Cat. 1b for decentralized machine switchboxes.

L1 L2 L3 PE

IP 65 switched-mode power supply / Electrical-cabinet socket outlet

IP 65 switched-mode power supply

+

AC DC

–

Basic operation is possible with two phases*

E Technical data Input data Rated input voltage AC frequency range AC current consumption Start-up surge current / start-up time Input fuse (internal) Output data Rated output voltage Max. residual ripple, inrush peaks Output deviation Rated output current @ Urated Powerboost @ 24 V DC, 0..5 A, ED = 10%, three-phase Output characteristic curve / current limit short-circuit-proof output power @ 24 V DC Mains buffering @ Irated Efficiency Protection against reverse voltages from the load General data

400 V AC** (3~, PE) 47 Hz - 63 Hz ~ 0.4 A @ 400 V AC < 10A @ 400 V AC / < 2 s Yes 24.25 V DC ± 50 mV (23.5…28.0 V DC) < 50 mVss @ 24 V DC / 5 A 500 mV @ 0...5 A 5 A @ 24 V DC 10 A, t ≤ 300 ms IU, 5.3 A ± 0.2 A Yes 120 W 20 ms @ 400 V AC ~ 86 % @ 400 V AC ≤ 34 V

Ambient temperature (operational) Ingress protection class, with PE connection Surge category / Pollution severity MTBF according to IEC 1709 (SN29500) EMC / shock / vibration

-25 °C … +50 °C

Noise emission acc. to EN 55022 (class) Noise immunity tests Resistance against vibration and shock Electrical safety

A

Electrical machine equipment For use with electronic equipment Safety extra-low voltage Connection data

according to EN 60204

type of connection Number of terminals conductor cross-section, min.-max.

Note

I II / 2 > 500,000 h @ 25 °C

according to EN 61000-6-2 according to EN 61373 Cat. 1b

according to EN 50178 / VDE 0160 according to SELV: EN 60950 / PELV: EN 60204 Input Output Plug-in connector Plug-in connector L1, L2, L3, PE

+, +, -, -, COM ,NO

0.5 mm² … 4 mm²

0.5 mm² … 4 mm²

* No power boost in two-phase mode or in current-limiting mode. ** UL approval and 480 V are pending.

Ordering data Type BG SNT PT6 Note

Qty. 1

Order No. 1101940000

Assembly accessories are included in delivery.

Accessories Note

E.5

IP 65 Power Supplies / Electrical-cabinet socket outlet

Electrical-cabinet socket outlet

Electrical-cabinet socket outlet

Schuko TS35

• Simple installation in electrical cabinet • TS35 module can be mounted on rail • VDE mark of conformity • Two-pole with earthing contact

Technical data

E

Rated voltage Rated voltage, max.

Rated current Clamping range, nom.

Tightening torque Ambient temperature Overvoltage category Pollution severity Protection class Approvals

Dimensions Clamping range (nominal / min. / max.)

Length x width x height

230 V 250 V 16 A 1.5 mm² 1,3 Nm -20 °C...+40 °C II 2 IP 20 VDE; CE

mm² mm

1.5 / 1 / 1.5 60 / 76 / 45

Note

Ordering data Connection system

Type Schuko TS35

Note

Accessories

E.6

Qty.

Order No.

10

8734580000