WHS Securistyle Range by Window Hardware Supply

CI/SfB Reference (31.49)

April 2008

STORM BALANCED Unrivalled weather sealing

STORM BALANCED HEAVY DUTY FRICTION HINGES FOR COMMERCIAL APPLICATIONS Self balancing hinge range Unrivalled weather sealing Capable of achieving high gust loading Low inventory non balancing range option Austenitic 304* stainless steel throughout Superior carrying capacity 12 year guarantee (details available upon request) HEAVY DUTY FRICTION SLIDERS Stainless steel composite sliders to give maximum strength yet perform with the smoothest of action

The Storm hinge range has been designed to exceed the requirements of AAMA 101/I.S.2 - 97, specifically high gust load rating. In addition to exceeding this high performance standard, Storm also benefits from excellent weathersealing from its unique asymmetric metal point and cap as well as smooth reliable operation. Full technical and sales support which will cover consultancy per project basis and on-site advice when necessary.

OPTIONAL ADJUSTMENT Slide-on end block for simple, accurate cam adjustment STEEL END LOCATOR A stainless steel end cap automatically directs the end point smoothly and firmly towards the closed position PULL IN BLOCK Maintains effective weather seal and reduces bowing on large vents.

* Austenitic (was 304) stainless steel to BS EN ISO 10088/2 Grade 1.4301 for enhanced corrosion resistance.

Securistyle Ltd. Kingsmead Industrial Estate, Princess Elizabeth Way, Cheltenham, Glos. GL51 7RE, UK. Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 228194/520828 E-mail: info@securistyle.co.uk Website: www.securistyle.co.uk

STORM BALANCED VENT/SASH

VENT ARM

Complies to the requirements of AAMA 904.1 - 87, 910 - 93 and 101/I.S.2 - 97)

0.236" (6mm) MAX RECESS DEPTH

Storm Egress variant available, allowing casement windows to open to a full 90º for emergency exit OUTER/FIXED FRAME TRACK 0.913" (23.2mm) MIN RECESS WIDTH

Available in 10”, 12”, 16”, 22” and 26” projecting and 10” and 16” casement

0.708" (18.0mm) CAVITY 0.629" (16.0mm)

PRODUCT SPECIFICATION

0.751" (19.1mm) MIN RECESS WIDTH

AS SMALL AS POSSIBLE FOR OPTIMUM PERFORMANCE 0.629" (16mm) NOM

Suitable for vents 11” to 7’2” high Standard, offset and highline and variants available

0.708" (18.0mm) CAVITY 0.629" (16.0mm)

0.098" (2.5mm) MAX RECESS DEPTH

Product Specification

Composite slider Storm BS10 and BS16 available as loose rivet variants NOTE ADDITIONAL LINK FORM ON STORMB26 HINGES ONLY.

OPTIONAL FEATURES Add on adjustment device Note: Pivot design provides additional friction at angles of 10º or less. However, it may be necessary to fit additional separate device(s) on top hung vents to enable them to remain in a selected ventilation position.

STORM BALANCED Hinge Code Hinge Length Top Hung STORM BALANCED (in/mm)

Max Vent Weight (lb/Kg)

Top Hung Length STORMB10 10/262 (in/mm) STORMB12 12/313 STORMB10 10/262 STORMB16 16/415 STORMB12 12/313 STORMB16 16/415 22/567 STORMB22 STORMB22 22/567 STORMB26* 26/680

Weight 81/37 (lb/Kg) 99/45 81/37 121/55 99/45 121/55 165/75 165/75 264/120

Hinge Code

STORMB26

Hinge

220/100

Min Vent Height (in/mm)

Opening Angle (+/- 2.5º)

Max Vent Height 25.0/635 (in/mm)

Min Vent Opening Height Angle 10.5/267 (in/mm) (+/- 2.5º)

30.9/787 25/635 42.9/1090 31/787 43/1090 59.0/1500 59/1500 87.0/2200

25.0/635 50º 11/267 30.9/787 50º 25/635 31/787 42.9/109050º 43/1090 50.0/127045º

79/2000

50/1270

Max Vent Width Width

Min Vent WidthWidth

Number

cycles 50ºof(’000’s) 50º 30 50º 30 45º 30 20º 30

Number of cycles (’000’s)

10 10 10 10 10

20º

83/38 83/38 103/47 103/47

26/660 12/300 26.0/665 11.0/280 85º 33/838 18/450 90º 33.0/838 18.0/457

80º 30 30 90º

Max Vent Weight (lb/Kg)

Max Vent Width (in/mm)

Max Vent Height (in/mm)

Hinge Length (in/mm)

Opening Angle (+/- 2.5º)

Number of cycles (’000’s)

103/47

33/838

18.0/450

16.3/415

90º

Side Hung

26/680

Max Vent

Max Vent Height (in/mm)

Side Hung

STORM10 10/262 STORMBS10 10/262 STORM16 16/415 STORMBS16 16/415

Max Vent

Min Vent

10 10

STORM EGRESS Hinge Code

STORME16 Due to our policy of continual improvement we reserve the right to alter specifications without notice. It is the responsibility of the window manufacturer to ensure that the finished window meets the required performance and safety specification. All transactions are subject to our standard conditions of supply, which are available on request.

*Vents of 100kg must be fitted with S7280 cam adjustment devices, which are optional on lighter vents. Separate restrictors (SR8 or SR16BAC pair), vent holding devices or an operating mechanism may be required to hold large vents in a selected ventilation position against variable wind pressure.

HINGES Sterling STORM® HINGES

ISSUE: March, 2006

STORM HINGES Heavy Duty Friction Hinges for Commercial Applications The Storm hinge range has been designed to exceed the requirements of AAMA 101.1, specifically gust loading to AW90 rating. In addition to exceeding this high performance standard, Storm also benefits from excellent weather sealing from its unique asymmetric metal point and cap as well as smooth reliable operation.

•

Easy to fit with adjustable friction mechanism

•

Asymmetric stainless steel cap and point for reliable, accurate closure

•

Composite Austenitic stainless steel/plastic slider for strength, durability and smooth operation

•

Tested to AAMA 904.1, 910 and 101.1

•

Tested to forces of 135 PSF (AW90) with no loss of weather seal

•

Manufactured from high grade Austenitic stainless steel

•

Available in 10", 12”, 16", 22" and 26" projecting, 10" and 16" casement

•

16” Egress 90° version for fire escape

•

Suitable for vents from 1’ (0.3m) to 7’ 2" (2.2m) high

•

10" and 16" casement open up to 90° for easy cleaning of windows

•

Standard, offset, highline and loose rivet variants available

•

26" top hung available with a carrying capacity of 264 lb (120kg)

•

Optional Austenitic Drop in limit stops for restricting the opening to 20/30/45 degrees on casement

•

Optional hinge position adjustment device available separately

•

Hinge handing is indicated by colour coding of the end caps

It is the responsibility of the user to ensure that this document is at the latest issue. Due to our policy of continual product improvement we reserve the right to alter specifications without notice. It is the responsibility of the window manufacturer to ensure that the finished window meets the required performance and safety specification. © SECURISTYLE LTD 2006

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

HINGES Sterling STORM® HINGES

ISSUE: March, 2006

CONTENTS - STORM Hinges SECTION

SHEET

7.1

STORMB10 Top Hung Hinge

7.2

STORMB12 Top Hung Hinge

7.2

STORMB16 Top Hung Hinge

7.2

STORMB22 Top Hung Hinge

7.2

STORMB26 Top Hung Hinge

7.2

STORM10 Side Hung Hinge

7.2

STORM16 Side Hung Hinge

7.2

STORME16 Side Hung Hinge

7.2

IMPERIAL VENT SIZE AND WEIGHT CHART STORM Hinges

METRIC VENT SIZE AND WEIGHT CHART STORM Hinges

FITTING INSTRUCTIONS: Fixing Hole References STORM Hinges

ASSEMBLY SHEETS

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

HINGES Sterling STORM® HINGES

SECTION 7.1

SHEET 1 of 3

ISSUE: September, 2007

IMPERIAL VENT SIZE AND WEIGHT CHART - STORM Hinges

Max. Vent Weight (lb)

Min. Vent Height (in)

Max. Vent Height (in)

Max. Vent Width (in)

Opening Angle (+/2.5º)

STORMB10

10.5

50º

STORMB12

50º

STORMB16

121

30.9

42.9

50º

STORMB22

165

42.9

45º

STORMB26

264

20º

Hinge Code Awning/Projecting

Min. Vent Width (in)

Hinge Code Casement STORMBS10

83.6

80º

STORMBS16

103

90º

STORME16

103

90º

Note: Vent height/width is measured from rebate to rebate (not overall size or outer frame size) on conventional windows or glass size on structurally glazed windows e.g. curtain wall panels whichever is the greater dimension. For maximum vent height and widths not stated, consult profile manufacturers for recommendations on requirements of system strength and sealing. Note: *Vents of 220 lb or higher, must be fitted with S7280 Cam adjustment devices, which are optional on lighter vents. Note: Separate restrictors (SR8 or SR16 pair), vent holding devices or an operating mechanism maybe required to hold large vents in a selected ventilation position against variable wind pressure. Note: Pivot design provides additional friction at angles of 10° or less. However, it may be necessary to fit additional separate device(s) on top hung vents to enable them to remain in a selected ventilation position. Note: Above sizes/weights also apply to BX (STERLING® Offset Series). Note: For loose rivet versions, used with opening devices, please contact Securistyle for advice on maximum sizes and weights.

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

HINGES Sterling STORM® HINGES

SECTION 7.1

SHEET 2 of 3

ISSUE: September, 2007

METRIC SIZE AND WEIGHT CHART - STORM Hinges

Max. Vent Weight (kg)

Min. Vent Height (mm)

Max. Vent Height (mm)

Max. Vent Width (mm)

Opening Angle (+/2.5º)

STORMB10

267

635

50º

STORMB12

635

787

50º

STORMB16

787

1090

50º

STORMB22

1090

1500

45º

STORMB26

120

1270

2200

20º

Hinge Code Awning/Projecting

Min. Vent Width (mm)

Hinge Code Casement STORMBS10

280

665

80º

STORMBS16

457

838

90º

STORME16

457

838

90º

Note: Vent height/width is measured from rebate to rebate (not overall size or outer frame size) on conventional windows or glass size on structurally glazed windows e.g. curtain wall panels whichever is the greater dimension. For maximum vent height and widths not stated, consult profile manufacturers for recommendations on requirements of system strength and sealing. Note: *Vents of 100 Kg or higher, must be fitted with S7280 Cam adjustment devices, which are optional on lighter vents. Note: Separate restrictors (SR8 or SR16 pair), vent holding devices or an operating mechanism maybe required to hold large vents in a selected ventilation position against variable wind pressure. Note: Pivot design provides additional friction at angles of 10° or less. However, it may be necessary to fit additional separate device(s) on top hung vents to enable them to remain in a selected ventilation position. Note: Above sizes/weights also apply to BX (STERLING® Offset Series). Note: For loose rivet versions, used with opening devices, please contact Securistyle for advice on maximum sizes and weights.

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

HINGES Sterling STORM® HINGES

SECTION 7.1

SHEET 3 of 3

ISSUE: September, 2007

FITTING INSTRUCTIONS: Fixing Hole Reference Fixing Hole Centre Reference Chart - STORM Hinges STORMB

- Storm Balanced Top Hung

STORMBS - Storm Balanced Side Hung STORME

- Storm Egress Side Hung

Dimensions Description STORMB10 STORMB12 STORMB16 STORMB22 STORMB26 STORMBS10 STORMBS16 STORME16

A 1.55 (39.4)

2.48 (63.1)

4.61 (117.0)

B -

6.44

7.00

(163.7)

(177.8)

7.43

8.37

(188.7)

(212.7)

9.44

11.97

(239.8)

(304.0)

2.50

7.94

12.44

16.47

(63.6)

(201.8)

(316.0)

(418.3)

8.59

10.10

(218.2)

(256.5)

10.59

12.10

(269.0)

(307.3)

14.59

16.10

(370.6)

(408.9)

20.59

22.10

(523.0)

(561.3)

2.50

11.68

14.36

12.55

23.01

25.06

26.57

(63.6)

(296.8)

(364.8)

(318.7)

(584.5)

(636.5)

(674.8)

1.28 (32.6)

2.50 (63.6)

6.44

4.79

7.00

8.59

(163.7)

(121.7)

(177.8)

(218.2)

9.44

7.15

11.97

14.59

(239.8)

(181.5)

(304.0)

(370.6)

9.44

4.98

(239.8)

(126.5)

14.59 (370.6)

Dimensions out of Brackets = Inches Dimensions in Brackets = Millimetres Note: Above hole fixings also apply for BX (Offset) variants.

Not to Scale, All dimensions in inches (mm)

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

HINGES Sterling STORM® HINGES

SECTION 7.2

SHEET 1 of 8

ISSUE: September, 2007

ASSEMBLY SHEET - STORMB10 Top Hung Hinge

Hinge Code

Max. Vent Weight lb - (Kg)

Min. Vent Height in - (mm)

Max. Vent Height in - (mm)

STORMB10

81 (37)

10.5 (267)

25 (635)

Max. Vent Width in - (mm) See profile manufacturers recommendations

Hardware Cavity in - (mm) 0.629-0.708 (16-18)

Not to Scale, All dimensions in inches (mm)

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

HINGES Sterling STORM® HINGES

SECTION 7.2

SHEET 2 of 8

ISSUE: September, 2007

ASSEMBLY SHEET - STORMB12 Top Hung Hinge

Hinge Code

Max. Vent Weight lb - (Kg)

Min. Vent Height in - (mm)

Max. Vent Height in - (mm)

STORMB12

99 (45)

25 (635)

31 (787)

Max. Vent Width in - (mm) See profile manufacturers recommendations

Hardware Cavity in - (mm) 0.629-0.708 (16-18)

Not to Scale, All dimensions in inches (mm)

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

HINGES Sterling STORM® HINGES

SECTION 7.2

SHEET 3 of 8

ISSUE: September, 2007

ASSEMBLY SHEET - STORMB16 Top Hung Hinge

Hinge Code

Max. Vent Weight lb - (Kg)

Min. Vent Height in - (mm)

Max. Vent Height in - (mm)

STORMB16

121 (55)

30.9 (787)

42.9 (1090)

Max. Vent Width in - (mm) See profile manufacturers recommendations

Hardware Cavity in - (mm) 0.629-0.708 (16-18)

Not to Scale, All dimensions in inches (mm)

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

HINGES Sterling STORM® HINGES

SECTION 7.2

SHEET 4 of 8

ISSUE: September, 2007

ASSEMBLY SHEET - STORMB22 Top Hung Hinge

Hinge Code

Max. Vent Weight lb - (Kg)

Min. Vent Height in - (mm)

Max. Vent Height in - (mm)

STORMB22

165 (75)

42.9 (1090)

59 (1500)

Max. Vent Width in - (mm) See profile manufacturers recommendations

Hardware Cavity in - (mm) 0.629-0.708 (16-18)

Not to Scale, All dimensions in inches (mm)

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

HINGES Sterling STORM® HINGES

SECTION 7.2

SHEET 5 of 8

ISSUE: September, 2007

ASSEMBLY SHEET - STORMB26 Top Hung Hinge

Hinge Code

Max. Vent Weight lb - (Kg)

Min. Vent Height in - (mm)

Max. Vent Height in - (mm)

STORMB26

264 (120)

50 (1270)

87.0 (2200)

Max. Vent Width in - (mm) See profile manufacturers recommendations

Hardware Cavity in - (mm) 0.629-0.708 (16-18)

Not to Scale, All dimensions in inches (mm)

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

HINGES Sterling STORM® HINGES

SECTION 7.2

SHEET 6 of 8

ISSUE: September, 2007

ASSEMBLY SHEET - STORMBS10 Side Hung Hinge

Hinge Code

Max. Vent Weight lb - (Kg)

Min. Vent Width in - (mm)

Max. Vent Width in - (mm)

STORMBS10

83.6 (38.0)

11 (280)

26 (665)

Max. Vent Height in - (mm) See profile manufacturers recommendations

Hardware Cavity in - (mm) 0.629-0.708 (16-18)

Not to Scale, All dimensions in inches (mm)

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

HINGES Sterling STORM® HINGES

SECTION 7.2

SHEET 7 of 8

ISSUE: September, 2007

ASSEMBLY SHEET - STORMBS16 Side Hung Hinge

Hinge Code

Max. Vent Weight lb - (Kg)

Min. Vent Width in - (mm)

Max. Vent Width in - (mm)

STORMBS16

103 (47)

18 (457)

33 (838)

Max. Vent Height in - (mm) See profile manufacturers recommendations

Hardware Cavity in - (mm) 0.629-0.708 (16-18)

Not to Scale, All dimensions in inches (mm)

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

HINGES Sterling STORM® HINGES

SECTION 7.2

SHEET 8 of 8

ISSUE: September, 2007

ASSEMBLY SHEET - STORME16 Side Hung Hinge

Hinge Code

Max. Vent Weight lb - (Kg)

Min. Vent Width in - (mm)

Max. Vent Width in - (mm)

STORME16

103 (47)

18 (457)

33 (838)

Max. Vent Height in - (mm) See profile manufacturers recommendations

Hardware Cavity in - (mm) 0.629-0.708 (16-18)

Not to Scale, All dimensions in inches (mm)

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

PARALLEL PLUS TYPE HEAVY DUTY PARALLEL HINGE SYSTEM BENEFIT Aesthetically pleasing sightlines, maintaining the reflective qualities, with builtbuilt-in safety features Parallel Plus - A Natural Ventilation Break Through

Unique features of the Parallel Plus Operating system:

The increasing demand for balanced and effective natural ventilation, whilst maintaining a safe and secure environment requires a highly innovative solution.

•

Vents weighing up to 180kg can be manually operated.

•

Significant cost saving on motor operators.

•

Parallel Plus vents can be restricted to 40mm openings and still provide whole perimeter ventilation and effective air exchange. (Tested and proven at the BRE)

•

Provides a safe, secure and well ventilated environment.

•

Air exchange equivalent to conventional window operating systems open to 100mm or more.

•

Adjustable parallelism.

•

Compensates for building and façade tolerances.

•

High resistance to corrosion.

•

Manufactured from 304 grade austenitic stainless steel.

Securistyle Limited, the World’s leading provider of parallel opening solutions in curtain walls (such as Federation Tower in Moscow shown below) launched the definitive solution to this problem in October 2007.

R ev 5 M a r 20 0 8

HINGES PARALLEL PLUS HINGES

ISSUE: May, 2009

PARALLEL PLUS Parallel Opening Hinge Securistyle parallel hinges provide natural ventilation whilst maintaining aesthetically pleasing sightlines for modern façade design. 

Parallel opening windows provide ultimate natural ventilation by allowing a balanced air flow around the entire opening



Capable of achieving the requirements of EN 12101-2:2003 Smoke and heat control systems. Specification for natural smoke and heat exhaust ventilators



Can be connected to a building management system as part of an automated solution for climate control



Utilises Securistyle’s patented control stay technology



Can be operated manually or using electric actuators



Unique patented parallelism adjustment facility



Patented synchronisation method on larger hinge sizes



Sash adjustment feature for use with heavier vents



Hinge mechanism is fully concealed when the sash is closed



Tested to operate for 20,000 cycles



Manufactured from high grade Austenitic stainless steel for maximum performance even in the most corrosive environment



12 year guarantee

Applications 

A high performance parallel opening hinge range for curtain walled and structurally glazed buildings

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

HINGES PARALLEL PLUS HINGES

ISSUE: May, 2009

CONTENTS - Parallel Plus Hinges SECTION

SHEET

9.1

Position and Clearances

9.1

Hardware Layout

9.1

Installation

9.1

Environmental Constraints

9.2

Heat and Smoke Ventilation

9.2

Maintenance and Lubrication

9.2

Hinge Operating Life

9.2

Corrosion Resistance

9.2

Product and Materials Specification

9.3

Standards Applicable for Parallel Hinges

9.3

VENT SIZE AND WEIGHT CHART Parallel Hinges

FITTING INSTRUCTIONS

PERFORMANCE AND MAINTENANCE

PRODUCT SPECIFICATION

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

HINGES PARALLEL PLUS HINGES

ISSUE: May, 2009

CONTENTS - Parallel Hinges SECTION

SHEET

PX350 Parallel Opening Hinge

9.4

PX0450 Parallel Opening Hinge

9.4

PX0670 Parallel Opening Hinge

9.4

PX0950 Parallel Opening Hinge

9.4

ASSEMBLY SHEETS

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

HINGES PARALLEL PLUS HINGES

SECTION 9.1

SHEET 1 of 6

ISSUE: May, 2009

VENT SIZE AND WEIGHT CHART - Parallel Hinges RECOMMENDATIONS FOR A MANUALLY OPERATED VENT FITTED WITH A SINGLE HINGE MOUNTED EACH SIDE Hinge Code

Max. Vent Weight (Kg)

Min. Vent Height (mm)

Max. Vent Height (mm)

PX0350

100

400

750

PX0450

100

750

970

PX0670

200

970

1250

PX0950

200

1250

2000

Note: Vent height and width is measured from rebate to rebate (not overall size or outer frame size), on conventionally glazed systems, for structurally glazed systems this is the minimum distance required to fit the hinge. Note: The above table is for guidance only; please contact Securistyle Technical Department for advice regarding project specific hardware specifications. Note: Two operating handles to be positioned centrally, one on each vertical side unless otherwise agreed with and specified by Securistyle Technical Department. MAXIMUM OPENING DISTANCES FOR MANUAL AND MOTORISED VENTS Hinge

Max. Manual Opening Motion (mm)

Max. Motorised Opening Motion (mm)

Manual Limit Stop Required

PX0350

150

180

PX0450

150

250

C8571

PX0670

150

C8627

PX0950

150

250

C8571

Note: Opening Motion is the movement measured from the closed position to the recommended open position for the type of operation stated. Note: The above table is for guidance only; please contact Securistyle Technical Department for advice regarding project specific opening distances. Note: For larger motorised vents please contact Securistyle Technical Department for advice regarding project specific hardware specifications. Note: Operating motors must have synchronised movement. Note: The motor operating devices must arrest the opening motion of the vent at the maximum specified opening distance.

Please contact Securistyle Technical Department for full hardware specification for any project involving Parallel Plus hinges.

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

HINGES PARALLEL PLUS HINGES

SECTION 9.1

SHEET 2 of 6

ISSUE: May, 2009

FITTING INSTRUCTIONS: Position and Clearances Parallel Hinges 9.1.1

The hinges are designed to be fitted between two flat and parallel rigid faces that conform to the measurements shown below.

9.1.2

Each hinge should be fitted with the vent track parallel to the vent profile and the frame track parallel to the frame profile.

9.1.3

Any sash and frame up stands must be within the maximum dimensions shown below.

Fig. 1

Not to Scale, All dimensions in mm

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

HINGES PARALLEL PLUS HINGES

SECTION 9.1

SHEET 3 of 6

ISSUE: May, 2009

FITTING INSTRUCTIONS: Hardware Layout Parallel Hinges 9.1.4

The side mounted hinges should be fitted with the fixed pivots to the bottom. Note: Securistyle recommends that the track incorporating the tie bar is fitted to the frame profile.

9.1.5

The control stays should be fitted to the top rail of the window, if only one control stay is required or top and bottom if two are required. Note: An example of the configuration for 3 x PX0670 is shown below. (See Fig. 2)

9.1.6

If two chain drive motors are used they must be fitted centrally on the shortest sides of the vent opposite each other. If four chain drive motors are used they must be positioned close to each vent corner (unless otherwise specified).

9.1.7

On manually operated vents use two operating handles mounted centrally on the vertical sides of the vent if the vent does not exceed 1500mm wide. Otherwise contact Securistyle Technical Department).

9.1.8

Parallel hinges do not provide weather sealing; if the window is manually operated this should be provided by a separate perimeter lock. If the window is motor operated this can be provided by either the motors or a synchronised motor operated separate perimeter lock.

Fig. 2 Note: For other hinge configurations, e.g. multiple side mounted hinges or non rectangular vents, please contact Securistyle Technical Department. Not to Scale, All dimensions in mm

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

HINGES PARALLEL PLUS HINGES

SECTION 9.1

SHEET 4 of 6

ISSUE: May, 2009

FITTING INSTRUCTIONS: Installation Parallel Hinges 9.1.9

All frame fixing holes should be pre drilled, referring to the screw hole position drawings in section 9.4. Where adjustment of the vent is required, only the vent fixings corresponding to the slotted screw holes should be pre drilled. Otherwise all vent fixings should be pre drilled.

9.1.10 Offer the hinges, including the control stay, up to the frame and fit all fixing screws. On the side mounted hinges the fixed pivots must be to the bottom of the hinge and the sliding pivots to the top of the hinge. 9.1.11 If the vent requires adjustment loosen the fixing screws on the vent and/or frame and reposition the vent as required. When the position of the vent is correct spot through the final fixing hole and fit remaining fixing screws, if not previously pre-drilled.

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

HINGES PARALLEL PLUS HINGES

SECTION 9.1

SHEET 5 of 6

ISSUE: May, 2009

FITTING INSTRUCTIONS: Installation Fixing Screws 9.1.12 Use M5 pan head screws for fixing vent track and frame track on all Parallel hinges. Refer to Figure 3 below for dimensional constraints.

Fig. 3 9.1.13 When installing hinges the following points should be adhered to:9.1.13.1

All hinge fixings should go through sufficient profile thickness or into screw channels. If this cannot be achieved Rivnuts or similar should be used.

9.1.13.2

Screw manufacturerâ&#x20AC;&#x2122;s recommendations must be adhered to at all times and if any instructions are supplied by window system manufacturers/suppliers, it is important they are followed.

9.1.13.3

Extreme care must be taken not to strip the thread as deterioration in performance will result.

9.1.13.4

Austenitic and certain types of modified Martensitic fixings provide superior corrosion resistance when subject to BS 7479.

Note: It is the responsibility of the window manufacturer to ensure that all fixing screws have adequate strength to support the weight of the sash and the forces exerted upon it over the full life of the window.

Not to Scale, All dimensions in mm

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

HINGES PARALLEL PLUS HINGES

SECTION 9.1

SHEET 6 of 6

ISSUE: May, 2009

FITTING INSTRUCTIONS: Installation Adjustment 9.1.14 All Parallel Plus hinges feature adjustable pivots at the top and bottom of each track (see Fig. 4) which can be used to help maintain parallelism between the vent and frame. Adjustment is achieved as follows:

Fig. 4 

Open parallel vent to specified maximum opening position.



Insert a 4mm hexagon (Allen) key into the top pivot on the frame track side and rotate to move the vent in or out relative to the frame.



If further adjustment is required repeat process on the bottom pivot on the frame track and the top/bottom pivots on the vent track.

Not to Scale, All dimensions in mm

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

HINGES PARALLEL PLUS HINGES

SECTION 9.2

SHEET 1 of 2

ISSUE: May, 2009

PERFORMANCE AND MAINTENANCE Environmental Constraints 9.2.1

9.2.2

Normal operating conditions for all hinges are: 9.2.1.1.

Operating temperature range -20°C to +60°C

9.2.1.2.

Operating humidity range 10% Relative Humidity to 95% Relative Humidity

The materials used will not degrade due to ultra violet light, or when using neutral acidity non solvent cleaning chemicals, at a rate faster than other parts of the window assembly.

Heat and Smoke Ventilation 9.2.3

Operating temperature range -20°C to +300°C. The product will resist the maximum temperature for 5 minutes and will operate once to fully opened position when maximum temperature is achieved in accordance with EN 12101-2.

Maintenance and Lubrication 9.2.4

As with most mechanical devices, hinges require periodic maintenance and lubrication. The hinge in general and particularly the pivots, sliding parts and track must be kept free from dirt, debris and any obstructions at all times. 9.2.4.1

At Time of Installation - lubricate all pivot points with general light engineering oil and wipe away excess. One drop per pivot is sufficient.

9.2.4.2

Every Five Years - carry out the following checks: a.

Clean any dirt or debris from the hinge and clear any obstructions from the pivots, sliding parts and track.

Apply lubrication as detailed in 9.2.3.1 above.

Check the tightness and security of all fixing screws and rivets.

Hinge Operating Life 9.2.5

To attain optimum operating life all criteria listed above under environmental constraints, vent sizes weights, opening distances and maintenance and lubrication must be adhered to.

9.2.6

Parallel hinges will function for at least 20,000 cycles under normal conditions of use. This performance is subject to compliance with SECURISTYLE® installation and maintenance instructions.

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

HINGES PARALLEL PLUS HINGES

SECTION 9.2

SHEET 2 of 2

ISSUE: May, 2009

PERFORMANCE AND MAINTENANCE Corrosion Resistance 9.2.6

When subjected to a 500 hour neutral salt spray test to EN ISO 9227: 2006 the hinge remains functional. There is no significant surface pitting caused by corrosion. Some surface discolouration is to be expected.

9.2.7

If a hinge is fitted in an area where it is exposed to a corrosive atmosphere, e.g. salt laden sea air in coastal locations, we recommend that in addition to the general maintenance and lubrication: 9.2.7.1

All metal surfaces are lightly coated with lubrication oil or sprayed with a proprietary anticorrosion spray. It is important to follow the manufacturerâ&#x20AC;&#x2122;s instructions for any products used.

9.2.7.2

Maintenance operations may need to be carried out more frequently. This is dependent on the severity of the prevailing conditions.

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

HINGES PARALLEL PLUS HINGES

SECTION 9.3

SHEET 1 of 1

ISSUE: May, 2009

PRODUCT SPECIFICATION Product and Materials Specification 9.3.1

The following is a guide to the materials used for Parallel hinges. 9.3.1.1

Surface Finish - All surface finishes are of good commercial quality. •

Stainless steel links are of cold rolled finish and are edge dressed to remove any sharp edges as far as practical.

•

Stainless steel track is of bright cold rolled finish.

•

Stainless steel components will not display surface blemishes, pits or scratches of greater than 20 sq. mm or 0.25mm maximum depth.

•

Plastic components are of uniform finish and colour. Visible surfaces will not display blemishes, pits or scratches of greater than 15 sq. mm or 0.2mm maximum depth.

•

Die cast components are finished with copper nickel chrome plating

Standards Applicable for Parallel Hinges 9.3.2

The relevant standards applicable are: Links

Stainless steel to BS EN ISO 10088-2 GRADE 1.4301: 2005

Track

Stainless steel to BS EN ISO 10088-2 GRADE 1.4301: 2005

Pivots

Stainless steel to BS EN ISO 10263-5 GRADE 1.4567: 2001

Slider Inner

Stainless Steel to BS EN ISO 10088-2 GRADE 1.4301: 2005

Slider Outer

Black Acetal Homopolymer or Acetal Copolymer

Pivot Washer

Natural (Translucent) Nylon

Pivot Blocks

Zinc Alloy ZA5 plated with Copper Nickel Chrome

Bush

Phosphor Bronze PB102

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

HINGES PARALLEL PLUS HINGES

SECTION 9.4

SHEET 1 of 4

ISSUE: May, 2009

ASSEMBLY SHEETS – PX0350 Parallel Plus Opening Hinge

Not to Scale, All dimensions in mm

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

HINGES PARALLEL PLUS HINGES

SECTION 9.4

SHEET 2 of 4

ISSUE: May, 2009

ASSEMBLY SHEETS – PX0450 Parallel Plus Opening Hinge

Not to Scale, All dimensions in mm

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

HINGES PARALLEL PLUS HINGES

SECTION 9.4

SHEET 3 of 4

ISSUE: May, 2009

ASSEMBLY SHEETS – PX0670 Parallel Plus Opening Hinge

Not to Scale, All dimensions in mm

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

HINGES PARALLEL PLUS HINGES

SECTION 9.4

SHEET 4 of 4

ISSUE: May, 2009

ASSEMBLY SHEETS – PX0950 Parallel Plus Opening Hinge

Not to Scale, All dimensions in mm

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

6509 Virage Datasheet.QXD

9/6/05

1:13 pm

Page 1

CI/SfB Reference

June 2005

(31.49)

INLINE

OFFSET

VIRAGE A new direction in window handles VIRAGE

Ergonomic design for comfort n Positive stop on offset espagnolette and cockspur to ensure accurate in-line closure n In-line espagnolette version for slimline profiles and non-handed applications n Push to unlatch mechanism n Key dead locking for added security n Non locking push button version for emergency escape n Green button Egress version available in in-line and offset espagnolette n Suited look for espagnolette and cockspur mixed applications n 10 year guarantee for Virage Espagnolette (details available upon request)

COCKSPUR

AVAILABLE IN OFFSET AND IN-LINE ESPAGNOLETTE AND COCKSPUR, THE VIRAGE HANDLE RANGE OFFERS: n

COLOUR RANGE

Silver

Black

Brass

White

Satin Chrome

Chrome

Black

Egress

Brass

White

VIRAGE COCKSPUR

Satin Chrome

Chrome

Black

Egress

Brass

White

VIRAGE ESPAGNOLETTE

6509 Virage Datasheet.QXD

9/6/05

1:13 pm

Page 2

VIRAGE Product Specification PRODUCT SPECIFICATION

KEY 16.9

KEY

16.8

16.9

KEY

7 A/F SQUARE DRIVE

VIRAGE COCKSPUR

VIRAGE ESPAGNOLETTE INLINE

7 A/F SQUARE DRIVE

VIRAGE ESPAGNOLETTE OFFSET

9 OR 21 AVAILABLE

9.5 TYP 2 SQUARE DRIVE LENGTH

SQUARE DRIVE LENGTH

5.2 TYP

167

162

9.5 TYP

11 21.5

PUSH FIT SCREW COVER PUSH FIT SCREW COVER

PUSH FIT SCREW COVER

LEFT HAND COCKSPUR VIRAGE SHOWN

LEFT HAND OFFSET ESPAGNOLETTE VIRAGE SHOWN

VIRAGE ESPAGNOLETTE

OFFSET

INLINE

VIRAGE COCKSPUR

Part Code

Espagnolette Locking

EBC

EBI

Cockspur Locking

Egress

EEC*

EEI*

Non Locking

Base Height (mm)

09,21

Square Drive Length (mm)

09,12,15,20,25, 30,40

09,12,15,20,25,30,40

Colour

WH (White) BS (Brass)

BK (Black) CH (Chrome)

WH (White) BS (Brass) BK (Black) SL (Silver)

Hand

R (Right) L (Left)

Colour Hand

BK (Black) CH (Chrome)

R (Right) L (Left)

*Available with green button in white only.

Due to our policy of continual improvement we reserve the right to alter specifications without notice. It is the responsibility of the window manufacturer to ensure that the finished window meets the required performance and safety specification. All transactions are subject to our standard conditions of supply, which are available on request.

Part Code

WH (White) BS (Brass)

CI/SfB Reference (31.49)

December 2004

DETACHABLE RESTRICTOR DETACHABLE RESTRICTOR KEY RELEASE RESTRICTOR STAY FOR USE WITH STERLING AND STORM COMMERCIAL HINGES Tested to BS 6375 Part 2 to withstand a force of 600N when opened at the restricted position n Austenitic 304* stainless steel for enhanced corrosion resistance n Compatible with all Securistyle commercial hinges including the Storm hinge n 10 year guarantee (details available upon request) n

t RELEASE KEY

Dedicated release key allowing the restrictor stay to be detached.

LOCKING PIN Unique locking pin design allowing simple detachment/ engagement of the restrictor stay.

HEAVY DUTY FRICTION SLIDER Stainless steel composite slider to give maximum strength yet perform with the smoothest of action.

* Austenitic (was 304) stainless steel to BS EN ISO 10088/2 Grade 1.4301 for enhanced corrosion resistance.

DETACHABLE RESTRICTOR 'DIM 'B'

PRODUCT SPECIFICATION

Suitable for 16mm to 18mm cavity heights

Non handed product

Keys available separately

R7437 RELEASE KEY

CAVITY

0.72" (18.0mm) MIN RECESS WIDTH VENT/SASH

TRACK

OUTER/FIXED FRAME FRAME BRACKET

0.638" (16.2mm) MIN RECESS WIDTH

0.708" (18.0mm) 0.629" (16.0mm)

Can be used on windows without reinforcement

' 'A

0.236" (6mm) MAX RECESS DEPTH

Easy to fit no routing required

0.098" (2.5mm) MAX RECESS DEPTH

IM 'D

AS SMALL AS POSSIBLE FOR OPTIMUM PERFORMANCE

DETACHABLE RESTRICTER STAY

Part Number SDR4 SDR6 SDR8 SDR10 R7437

Description

Dim ‘A’ (in/mm)

Dim ‘B’ (in/mm)

Boxed Qty.

4” Detachable Restrictor Assembly 6” Detachable Restrictor Assembly 8” Detachable Restrictor Assembly 10” Detachable Restrictor Assembly Release Key

4/101.6 6/152.4 8/203.2 10/254

5.9/150 7.87/200 7.87/200 9.84/250

50 50 50 50 10

ANCILLARY DEVICES RESTRICTOR STAYS

ISSUE: September, 2008

RESTRICTOR STAYS Designed for use with all Securistyle Domestic/Commercial hinges Separate Restrictors can be used to provide permanent/key releasable openings.

Applications •

Windows where a fixed opening is required

•

Suitable for use with all Securistyle Domestic/Commercial hinges

•

Domestic and commercial windows

•

Detachable Restrictor is suitable for windows which may require periodic cleaning/maintenance

Product features •

Options for Domestic and Commercial profiles

•

Key operated detachable version for Commercial windows

•

Austenitic stainless as standard on Commercial Restrictor

Customer benefits •

Fixed restriction to a wide range of opening angles

•

Key releasable restriction for cleaning/maintenance

•

Securistyle quality and guaranteed performance

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

ANCILLARY DEVICES RESTRICTOR STAYS

ISSUE: September, 2008

CONTENTS - RESTRICTOR STAYS SECTION

SHEET

Application

2.1

Selection

2.1

Domestic Restrictor Stays

2.1

Commercial Restrictor Stays

2.1

Commercial Detachable Restrictor Stays

2.1

Application and Selection

FITTING INSTRUCTIONS: Position and Clearances

FITTING INSTRUCTIONS: Vent and Frame Preparation and Fitting Vent preparation and Fitting of Restrictor Stays

2.1

Frame preparation and Fitting of Restrictor Stays

2.1

Vent preparation and Fitting of Detachable Restrictor Stays

2.1

Frame preparation and Fitting of Detachable Restrictor Stays

2.1

Fixing Screws

2.1

Fixing Rivets

2.1

FITTING INSTRUCTIONS: Detachable Restrictor Stays Detachable Restrictor Key Release

FITTING INSTRUCTIONS: Screws

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

ANCILLARY DEVICES RESTRICTOR STAYS

ISSUE: September, 2008

CONTENTS - RESTRICTOR STAYS SECTION

SHEET

Environmental Constraints

2.2

Maintenance

2.2

Operating Life

2.2

Corrosion Resistance

2.2

Product and Materials Specification

2.3

Standard Applicable to Restrictor Stays

2.3

RS4 Restrictor Stay

2.4

RS6 Restrictor Stay

2.4

RS9 Restrictor Stay

2.4

SR4 Restrictor Stay

2.4

SR8 Restrictor Stay

2.4

SR16E Restrictor Stay

2.4

SR16BAC Restrictor Stay

2.4

SDR4 Detachable Restrictor Stay

2.4

SDR6 Detachable Restrictor Stay

2.4

PERFORMANCE AND MAINTENANCE

PRODUCT SPECIFICATION

ASSEMBLY SHEETS

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

ANCILLARY DEVICES RESTRICTOR STAYS

ISSUE: September, 2008

CONTENTS - RESTRICTOR STAYS SECTION

SHEET

SDR8 Restrictor Stay

2.4

SDR10 Restrictor Stay

2.4

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

ANCILLARY DEVICES RESTRICTOR STAYS

SECTION 2.1

SHEET 1 of 12

ISSUE: September, 2008

Application and Selection - RESTRICTOR STAYS Application General: 2.1.1

The Domestic and Commercial Restrictor Stays/Detachable Restrictor Stays* give an opportunity to permanently restrict opening vents, particularly useful in applications where child safety is required or where windows open out onto corridors or gangways. *Key operated version available for cleaning/maintenance requirements of commercial windows.

Operation: 2.1.2

In normal operation the restrictor stay allows the vent to open until the slider engages against the crack stop of the track.

2.1.3

In normal operation the detachable restrictor stay allows the vent to open until the slider engages against the crack stop of the track, the user can then detach the restrictor through the use of a release key.

Selection General: 2.1.4

Designed to be fitted to the same part of the profile as the vent arm and track will suit virtually any profile that can use Securistyle Hinges.

2.1.5

For fixed permanent restriction: Domestic Windows

- RS4 - RS6 - RS9

Commercial Windows - SR4 - SR8 - SR16 2.1.6 For key releasable restriction of Commercial Windows

- SDR4 - SDR6 - SDR8 - SDR10

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

ANCILLARY DEVICES RESTRICTOR STAYS

SECTION 2.1

SHEET 2 of 12

ISSUE: September, 2008

FITTING INSTRUCTIONS: Position and Clearances Domestic Restrictor Stays 2.1.7

The Domestic Restrictor Stays are designed to be fitted between two flat and parallel rigid faces that conform to the measurements shown below.

2.1.8

The vent and outer frame location recess or up stand, if any, must be as shown in Fig. 1.

Fig. 1

Not to Scale, All dimensions in mm

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

ANCILLARY DEVICES RESTRICTOR STAYS

SECTION 2.1

SHEET 3 of 12

ISSUE: September, 2008

FITTING INSTRUCTIONS: Position and Clearances Commercial Restrictor Stays 2.1.9

The Commercial Restrictor Stays are designed to be fitted between two flat and parallel rigid faces that conform to the measurements shown below.

2.1.10 The vent and outer frame location recess or up stand, if any, must be as shown in Fig. 2.

Fig. 2

Not to Scale, All dimensions in mm

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

ANCILLARY DEVICES RESTRICTOR STAYS

SECTION 2.1

SHEET 4 of 12

ISSUE: September, 2008

FITTING INSTRUCTIONS: Position and Clearances Commercial Detachable Restrictor Stays 2.1.11 The Commercial Restrictor Stays are designed to be fitted between two flat and parallel rigid faces that conform to the measurements shown below. 2.1.12 The vent and outer frame location recess or up stand, if any, must be as shown in Fig. 3.

Fig. 3

Not to Scale, All dimensions in mm

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

ANCILLARY DEVICES RESTRICTOR STAYS

SECTION 2.1

SHEET 5 of 12

ISSUE: September, 2008

FITTING INSTRUCTIONS: Vent and Frame Preparation and Fitting Vent Preparation and Fitting of Restrictor Stays Preparation: 2.1.13 No routing of the profile is required unless the profile silhouette does not conform to the clearances requirements (see Figs 1 and 2).

Fitting: 2.1.14 Position the Restrictor Stay Vent Bracket against any sideways hinge location features or in the hinge location channel on the vent. If the vent does not have hinge location features, determine the correct position by referring to the profile manufacturers fabrication manual and measuring/marking, (‘Fitting Instructions: Positions and Clearances’ will help). Note: The closer the Restrictor Stay is positioned to the hinge the greater the opening angle of the vent will be, subsequently the further away the Vent Bracket is positioned from the hinge the smaller the opening angle of the vent will be. See Fig. 4

Fig. 4 Fixing: 2.1.15 Insert fixings through the holes in the Vent Bracket once you are satisfied with its position. If possible pick up on any screw location ports* and/or reinforcement.

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

ANCILLARY DEVICES RESTRICTOR STAYS

SECTION 2.1

SHEET 6 of 12

ISSUE: September, 2008

FITTING INSTRUCTIONS: Vent and Frame Preparation and Fitting Frame Preparation and Fitting of Restrictor Stays Preparation: 2.1.16 No routing of the profile is required unless the profile silhouette does not conform to the clearances requirements (See Figs. 1 and 2).

Fitting: 2.1.17 Position the Restrictor Stay track with the stay in its open position against any sideways hinge location features or in the hinge location channel on the frame, commonly the glazing bar clip channel. See Fig. 5

Fig. 5 Fixing: 2.1.18 Insert fixings through the slot/slots in the track in the track once you are satisfied with its position, insert the final fixing into the fixing hole/holes. If possible pick up on any screw location ports* and/or reinforcement. *Certain profiles incorporate a groove to assist with screw positioning/insertion. For screw specification refer to subsequent section.

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

ANCILLARY DEVICES RESTRICTOR STAYS

SECTION 2.1

SHEET 7 of 12

ISSUE: September, 2008

FITTING INSTRUCTIONS: Vent and Frame Preparation and Fitting Vent Preparation and Fitting of Detachable Restrictor Stays Preparation: 2.1.19 No routing of the profile is required unless the profile silhouette does not conform to the clearances requirements (see Fig. 3).

Fitting: 2.1.20 Position the Restrictor Stay track inline with the hinge vent arm, parallel with any sideways hinge location features or in the hinge location channel on the frame, commonly the glazing bar clip channel.

Fixing: 2.1.21 Insert fixings through the slot/slots in the track in the track once you are satisfied with its position then insert the final fixing into the fixing hole/holes. If possible pick up on any screw location ports* and/or reinforcement.

Frame Preparation and Fitting of Restrictor Stays Preparation: 2.1.22 No routing of the profile is required unless the profile silhouette does not conform to the clearances requirements. See Fig. 3.

Fitting: 2.1.23 Position the Restrictor Stay Frame Bracket inline with the track of the hinge, parallel with any sideways hinge location features or in the hinge location channel on the vent ensuring that the Vent Bracket is orientated so that the keyway is pointing away from the hinge. See Fig. 6. If the vent does not have hinge location features, determine the correct position by referring to the profile manufacturers fabrication manual and measuring/marking, (‘Fitting Instructions: Positions and Clearances’ will help). Note: The closer the Detachable Restrictor Stay is positioned to the hinge the greater the opening angle of the vent will be, subsequently the further away the Vent Bracket is positioned from the hinge the smaller the opening angle of the vent will be. (As Fig. 4 but with the Vent Bracket attached to the Frame and the Track attached to the Vent).

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

ANCILLARY DEVICES RESTRICTOR STAYS

SECTION 2.1

SHEET 8 of 12

ISSUE: September, 2008

FITTING INSTRUCTIONS: Vent and Frame Preparation and Fitting

Fig. 6

Fixing: 2.1.24 Insert fixings through the holes in the Frame Bracket once you are satisfied with its position. If possible pick up on any screw location ports* and/or reinforcement. *Certain profiles incorporate a groove to assist with screw positioning/insertion. For screw specification refer to subsequent section.

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

ANCILLARY DEVICES RESTRICTOR STAYS

SECTION 2.1

SHEET 9 of 12

ISSUE: September, 2008

FITTING INSTRUCTIONS: Detachable Restrictor Stays Detachable Restrictor Key Release Operation 2.1.25 In order to release the Detachable Restrictor Pivot Arm from the Frame Bracket the user must insert the Release Key into the Key Way of the Frame Bracket and rotate it in a clockwise direction through 90°. See Fig. 7.

Fig. 7

2.1.26 The user then detaches the Pivot Arm clear from the Frame Bracket. See Fig. 8.

Fig. 8

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

ANCILLARY DEVICES RESTRICTOR STAYS

SECTION 2.1

SHEET 10 of 12

ISSUE: September, 2008

FITTING INSTRUCTIONS: Screws and Rivets Fixing Screws 2.1.27 On the following Restrictor Stays the fixings specified should be used: 2.1.27.1

Domestic Restrictor Stays - Use No. 8 fixing screws or specialist equivalent e.g. special threads for PVCu.

2.1.28 The following constraints should be strictly adhered to:2.1.28.1

Pan or mushroom head screws are the preferred option. See Fig. 5

2.1.28.2

Countersunk heads are acceptable but will not produce a neat appearance. See Fig. 5

2.1.28.3

Screws with countersunk/pan heads are also an acceptable head format. See Fig. 5

2.1.28.4

Screw manufacturers recommended pilot hole sizes must be adhered to at all times and if any instructions are supplied by window system manufacturers/suppliers, such as “screw into reinforcement”, it is important that they are followed.

2.1.28.5

When fitting Restrictor Stays extreme care must be taken not to strip the thread as deterioration in performance will result.

2.1.28.6

It is has been shown that Austenitic fixings provide superior corrosion resistance when subject to BS 7479.

Fig. 6 Note: It is the responsibility of the window manufacturer to ensure that all fixing screws and rivets have adequate strength to support the weight of the window vent and the forces exerted upon it over the full life of the window.

Not to Scale, All dimensions in mm

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

ANCILLARY DEVICES RESTRICTOR STAYS

SECTION 2.1

SHEET 11 of 12

ISSUE: September, 2008

FITTING INSTRUCTIONS: Screws and Rivets Fixing Screws 2.1.29 On the following Restrictor Stays the fixings specified should be used: 2.1.29.1

Commercial Restrictor Stays/Commercial Detachable Restrictor Stays - Use No.10 self tapping screws or M5 screws and M5 Rivnuts or a specialist equivalent i.e. with special threads for PVCu.

2.1.30 The following constraints should be strictly adhered to:2.1.30.1

Pan, mushroom or standard dome head screws are the preferred option.

2.1.30.2

Countersunk heads are acceptable but will not produce a neat appearance.

2.1.30.3

Screws with special combination countersunk/pan heads are also an acceptable head format. See Fig. 6 below.

2.1.30.4

2.1.30.5

When fitting Restrictor Stays extreme care must be taken not to strip the thread as deterioration in performance will result.

2.1.30.6

It is has been shown that Austenitic and certain types of Modified Martensitic fixings provide superior corrosion resistance when subject to BS 7479.

Fig. 7

Note: It is the responsibility of the window manufacturer to ensure that all fixing screws and rivets have adequate strength to support the weight of the window vent and the forces exerted upon it over the full life of the window.

Not to Scale, All dimensions in inches & mm

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

ANCILLARY DEVICES RESTRICTOR STAYS

SECTION 2.1

SHEET 12 of 12

ISSUE: September, 2008

FITTING INSTRUCTIONS: Screws and Rivets Fixing Rivets 2.1.31 Fixing rivets (pop and peel blind rivets) should be 5mm or 3/16 inch diameter and of a length to suit the total riveting thickness as recommended by the rivet manufacturer. The following additional constraints must be adhered to:2.1.31.1

Head maximum sizes must not exceed those shown below.

2.1.31.2

All rivet manufacturers recommendations must be observed.

2.1.31.3

Only stainless steel rivets are recommended for use by SECURISTYLEÂŽ Ltd.

Fig. 8 Note: It is the responsibility of the window manufacturer to ensure that all fixing screws and rivets have adequate strength to support the weight of the window vent and the forces exerted upon it over the full life of the window.

Not to Scale, All dimensions in inches & mm

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

ANCILLARY DEVICES RESTRICTOR STAYS

SECTION 2.2

SHEET 1 of 2

ISSUE: September, 2008

PERFORMANCE AND MAINTENANCE Environmental Constraints 2.2.1

2.2.2

Normal operating conditions for all hinges are: 2.2.1.1

Operating temperature range -20°C to +60°C

2.2.1.2

Operating humidity range 10% Relative Humidity to 95% Relative Humidity

The materials used will not degrade due to ultra violet light, or when using neutral acidity non solvent cleaning chemicals, at a rate faster than other parts of the window assembly. However, the practice of cleaning brickwork with acidic based products will have serious effects if allowed to come into contact with hardware. Corrosion or failure of hardware as a result of this practice will not be covered by the warranty issued on such products. For further advice on procedures for protecting the window during this operation, please contact the window manufacturer or hardware supplier.

Maintenance and Lubrication 2.2.3

As with most mechanical devices, Restrictor Stays require periodic maintenance and lubrication. The hinge in general and particularly the pivots, sliding shoe and track must be kept free from dirt, debris and any obstructions at all times. 2.2.3.1

At Time of Installation - Lubricate all pivot points with light machine oil and wipe away excess, one drop per pivot is sufficient. We suggest one of the following lubricants or equivalent: a.

General light engineering oil with corrosion inhibitors such as Castrol Everyman or 3 in 1 oil (available in aerosol can for convenience).

Note: Solvent based aerosol sprays e.g. WD40 are not suitable for this application. 2.2.3.2

Every Five Years - Carry out the following checks every five years: a.

Clean any dirt or debris from the hinge and clear any obstructions from the pivots, sliding shoe and track.

Apply lubrication as detailed in 2.2.4.1 above.

Check the tightness and security of all fixing screws and rivets.

Operating Life 2.2.4

To attain optimum operating life all criteria listed above under; environmental constraints, and maintenance and lubrication must be adhered to.

2.2.5

All Restrictor Stays will function normally for up to 30,000 cycles under normal conditions of use. This performance is subject to compliance with SECURISTYLE® installation and maintenance instructions.

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

ANCILLARY DEVICES RESTRICTOR STAYS

SECTION 2.2

SHEET 2 of 2

ISSUE: September, 2008

PERFORMANCE AND MAINTENANCE Corrosion Resistance 2.2.6

When subjected to neutral salt spray test to BS 7479: 1991 / ISO 9227: 1990 the hinge remains functional. There is no significant surface pitting caused by corrosion. Some surface discolouration is to be expected.

2.2.7

If a hinge is fitted in an area where it is exposed to a corrosive atmosphere, e.g. salt laden sea air in coastal locations, we recommended that in addition to the general maintenance and lubrication: 2.2.7.1

2.2.7.2

Maintenance operations may need to be carried out more frequently. This is dependent on the severity of the prevailing conditions.

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

ANCILLARY DEVICES RESTRICTOR STAYS

SECTION 2.3

SHEET 1 of 3

ISSUE: September, 2008

PRODUCT SPECIFICATION Product and Materials Specification 2.3.1

The following is a guide to the materials used for Domestic and Commercial Restrictor Stays. 2.3.1.1

Surface Finish - All surface finishes are of good commercial quality. •

2mm & 2.5mm stainless steel components (links) are of cold rolled finish and are edge dressed to remove the sharp edges as far as is practical.

•

0.9mm stainless steel components (track) are of bright cold rolled finish.

•

1.22mm stainless steel components (track) are of bright cold rolled finish.

•

Stainless steel components will not display surface blemishes, pits or scratches of greater than 20 sq. mm or 0.25mm maximum depth.

•

Plastic components are of uniform finish and colour. Visible surfaces will not display blemishes, pits or scratches of greater than 15 sq. mm or 0.2mm maximum depth.

•

Die cast components are of uniform finish. Visible surfaces will not display blemishes, pits or scratches of greater than 15 sq. mm or 0.2mm maximum depth.

Standards Applicable for Restrictor Stays 2.3.2

The relevant standards applicable are: 2.3.2.1

2.3.2.2

Ferritic Stainless Steel Links

Stainless steel to BS EN ISO 10088/2 GRADE 1.4016: 1995

Track

Stainless steel to BS EN ISO 10088/2 GRADE 1.4016: 1995

Austenitic Stainless Steel Links

Stainless steel to BS EN ISO 10088/2 GRADE 1.4301: 1995

Track

Stainless steel to BS EN ISO 10088/2 GRADE 1.4301: 1995

Pivot Rivets

Stainless steel to BS EN ISO 10263/5 GRADE 1.4567: 2001

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

ANCILLARY DEVICES RESTRICTOR STAYS

SECTION 2.3

SHEET 2 of 3

ISSUE: September, 2008

PRODUCT SPECIFICATION 2.3.3

Other Materials for Domestic and Sterling Commercial Restrictor Stays. Slider

Grey Acetal Homopolymer or Acetal Copolymer

Stainless Steel to BS EN ISO 10088/2 GRADE 1.4301: 1995

Black Acetal Homopolymer or Acetal Copolymer

13% Glass Filled Nylon

Zinc Alloy plated with Zinc and Gold Passivate

Austenitic Stainless steel to BS 6105 Grade A1-50

Natural (Translucent) Nylon

1.96mm to 2.1mm

2.39mm to 2.61mm

15.9mm to 16.1mm

18.85mm to 19.05mm

4.79mm to 5.23mm

5.80mm to 6.00mm

18.02mm to 18.36mm

22.9mm to 23.2mm

(DEFENDER® Restrictor Stays only)

Slider Inner (STERLING®, Sterling STORM® Restrictor Stays only)

Slider Outer (STERLING® Restrictor Stays only)

Slider Outer (Sterling STORM® Restrictor Stays only)

Friction Cam (DEFENDER® Restrictor Stays only)

Friction Screw (STERLING®, Sterling STORM® Restrictor Stays only)

Pivot Washer

2.3.4

Link and Track Dimensions Link thickness

Link width

Track rolled section height

Track rolled section width

Note: Component descriptions which have ( ) under them, indicate that the component is only used on the stated hinge range/assembly. Those which do not indicate that the component is used on Domestic and Commercial restrictor stays.

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

ANCILLARY DEVICES RESTRICTOR STAYS

SECTION 2.3

SHEET 3 of 3

ISSUE: September, 2008

PRODUCT SPECIFICATION 2.3.5

Testing Standards 2.3.5.1

BS 6375 : Part 2 : 1987. Section 5 Testing. Ref. appendix A (A.7 Test 6).

2.3.5.2

BS 8213 : Part 1 : 1991. Section 2. Safety in use. Point 5.1.2.

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

ANCILLARY DEVICES RESTRICTOR STAYS

SECTION 2.4

SHEET 1 of 11

ISSUE: September, 2008

ASSEMBLY SHEET - RS4 Restrictor Stay

Not to Scale, All dimensions in mm

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

ANCILLARY DEVICES RESTRICTOR STAYS

SECTION 2.4

SHEET 2 of 11

ISSUE: September, 2008

ASSEMBLY SHEET - RS6 Restrictor Stay

Not to Scale, All dimensions in mm

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

ANCILLARY DEVICES RESTRICTOR STAYS

SECTION 2.4

SHEET 3 of 11

ISSUE: September, 2008

ASSEMBLY SHEET - RS9 Restrictor Stay

Not to Scale, All dimensions in mm

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

ANCILLARY DEVICES RESTRICTOR STAYS

SECTION 2.4

SHEET 4 of 11

ISSUE: September, 2008

ASSEMBLY SHEET - SR4 Restrictor Stay

Not to Scale, All dimensions in inches & mm

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

ANCILLARY DEVICES RESTRICTOR STAYS

SECTION 2.4

SHEET 5 of 11

ISSUE: September, 2008

ASSEMBLY SHEET - SR8 Restrictor Stay

Not to Scale, All dimensions in inches & mm

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

ANCILLARY DEVICES RESTRICTOR STAYS

SECTION 2.4

SHEET 6 of 11

ISSUE: September, 2008

ASSEMBLY SHEET - SR16E Restrictor Stay

Not to Scale, All dimensions in inches & mm

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

ANCILLARY DEVICES RESTRICTOR STAYS

SECTION 2.4

SHEET 7 of 11

ISSUE: September, 2008

ASSEMBLY SHEET - SR16BAC Restrictor Stays

Not to Scale, All dimensions in inches & mm

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

ANCILLARY DEVICES RESTRICTOR STAYS

SECTION 2.4

SHEET 8 of 11

ISSUE: September, 2008

ASSEMBLY SHEET - SDR4 Detachable Restrictor Stay

Not to Scale, All dimensions in inches & mm

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

ANCILLARY DEVICES RESTRICTOR STAYS

SECTION 2.4

SHEET 9 of 11

ISSUE: September, 2008

ASSEMBLY SHEET - SDR6 Detachable Restrictor Stay

Not to Scale, All dimensions in inches & mm

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

ANCILLARY DEVICES RESTRICTOR STAYS

SECTION 2.4

SHEET 10 of 11

ISSUE: September, 2008

ASSEMBLY SHEET - SDR8 Detachable Restrictor Stay

Not to Scale, All dimensions in inches & mm

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

ANCILLARY DEVICES RESTRICTOR STAYS

SECTION 2.4

SHEET 11 of 11

ISSUE: September, 2008

ASSEMBLY SHEET - SDR10 Detachable Restrictor Stay

Not to Scale, All dimensions in inches & mm

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

ANCILLARY DEVICES COMMERCIAL PULL-IN BLOCKS

ISSUE: March 2008

COMMERCIAL PULL IN BLOCKS Ancillary weather seal device. Purpose designed for large commercial top-hung windows using Securistyle Ltd. Sterling and Storm Balanced Hinges. Designed for ease of use, consistent performance and made adjustable to suit the application. The commercial pull in block will prevent bowing of large commercial top hung windows thus relieving additional stresses on the hinges and increasing weather seal of the window. Applications •

Maintains effective weather seal and reduces bowing on large top hung windows

•

Suitable for use with Sterling and Storm Balance commercial top hung windows

Product Features •

No routing or drilling of profile required

•

Retro-fittable design allows upgrade of existing windows

•

Adjustable design allows the product to suit application and profile

Customer Benefits •

Give attractive ‘optional extra’ feature

•

Securistyle quality and guaranteed performance

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

ANCILLARY DEVICES COMMERCIAL PULL-IN BLOCKS

ISSUE: March 2008

CONTENTS – COMMERCIAL PULL-IN BLOCKS SECTION

SHEET

APPLICATION Application

1.1

2.1

FITTING INSTRUCTIONS: Position and Clearances Commercial Pull-In Block

FITTING INSTRUCTIONS: Vent and Frame Preparation and Fitting Vent and Frame Preparation and Fitting

2.2

2.3

2.4

Environmental Constraints

3.1

Performance

3.1

Maintenance

3.1

Operating Life

3.1

Corrosion Resistance

3.1

Product and Materials Specification

4.1

Standard Applicable to Commercial Pull-In Block

4.1

FITTING INSTRUCTIONS: Screws Fixing Screws

FITTING INSTRUCTIONS: Fixing Hole Reference Fixing Holes References

PERFORMANCE AND MAINTENANCE

PRODUCT SPECIFICATION

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

ANCILLARY DEVICES COMMERCIAL PULL-IN BLOCKS

SHEET 1 of 5

ISSUE: March 2008

APPLICATION

Application

General: 1.1

On large Commercial Top hung windows, due to large gust/shock loads and large heavy windows, weather seal can be lost due to bowing of the actual window. The commercial pull in block assembly is a recent development from Securistyle Ltd to help ensure an effective weather seal is kept and maintained by preventing bowing. The reduction of bow in the window will also help to reduce the additional stress caused to the hinges.

1. 2

The Commercial pull in blocks have been specifically designed to work well and successfully with both the Sterling and Storm Balanced hinge range. The pull in blocks, are designed to be fitted to a window at any time throughout its life due to them being a retro-fit design. The adjustability of the pull in block assembly exists to suit the application.

Operation: 1. 3

When fitted to a new window that hasnâ&#x20AC;&#x2122;t had any wind deformation or bowing, then the pull in blocks are to be set to a position where the fixed and adjustable parts are just clear of each other. See Fig. 1.

Fig. 1 1.4

When fitting to a window that is older and/or has slight bowing, the pull in blocks should be fitted so that during the opening and closing operation of the window there is definite contact between the fixed and adjustable parts. See Fig. 2.

Fig. 2

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

ANCILLARY DEVICES COMMERCIAL PULL-IN BLOCKS

SHEET 2 of 5

ISSUE: March 2008

FITTING INSTRUCTIONS: Position and Clearances

FITTING INSTRUCTIONS

2.1

Position and Clearances:

2.1.1

The commercial pull in blocks, are designed to be used on large commercial top hung profiles that are suitable for use with Sterling and Storm Balanced hinges. The adjustable and fixed parts are to be fitted between two flat and parallel rigid faces that conform to the measurements represented below in Fig. 3.

2.1.2

The vent and outer frame location recess or up stand, if any, must be as shown in Fig. 3.

Fig. 3 â&#x20AC;&#x201C; Top Hung Window Layout.

2.1.3

The commercial pull in blocks, are to be fitted at the hinged edge of the window, positioned at 100mm to 200mm from each corner and then across at 1000mm spacing to aid weather sealing.

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

ANCILLARY DEVICES COMMERCIAL PULL-IN BLOCKS

SHEET 3 of 5

ISSUE: March 2008

FITTING INSTRUCTIONS: Vent and Frame Preparation and Fitting 2.2

Vent and Frame Preparation and Fitting

Preparation: 2.2.1

No Routing or boring of the profile is required unless the profile silhouette does not conform to the clearances requirements, (please see section 2.1, Fig. 3).

Fitting: 2.2.2

Position the two commercial pull in block parts on the profile inline with the hinge track and hinge vent arm, ensuring the two components are in line with each other length wise. Correct alignment will be determined by measurement.

Fixing: 2.2.3

Fixed part (R8304) – The fixed part is to be positioned on the vent/sash, and fixings are to be inserted through the holes and tightened.

2.2.4

Adjustable part (S8305) – The adjustable part is to be positioned on the frame, and the fixings are to be inserted through the slots. Once the correct adjustment has been determined, screws can then be tightened.

Adjustment: 2.2.5

Once the commercial pull-in blocks have been installed on a complete window assembly, correct adjustment of the device must be determined.

2.2.6

Fixing screws are to be loosened to allow ease of adjustment of adjustable part S8305. Correct positioning of component is to be found with aid of serrations.

2.2.7

Once the correct adjustment has been determined, screws can then be tightened.

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

ANCILLARY DEVICES COMMERCIAL PULL-IN BLOCKS

SHEET 4 of 5

ISSUE: March 2008

FITTING INSTRUCTIONS: Screws 2.3

Screws

Fixing Screws: 2.3.1

Use minimum No. 8 (Ø4.3mm) fixing screws for PVC-u or minimum Ø3.9mm reinforcing screw and maximum No. 10 (Ø4.8mm) fixing screws. Depending on the profile, will determine which size screw is required. The screw and profile suppliers should also be consulted for specific requirements; SECURISTYLE® can assist with testing and validation of the Commercial Pull in Blocks®

Recommendations:2.3.2

Countersunk head screws are the preferred option. (Please see fig. 4)

2.3.3

Pan or mushroom head screws are acceptable, but will not produce a neat appearance.

2.3.4

Screws with friction stay countersunk/pan heads are also acceptable.

2.3.5

Screw manufacturers’ recommend pilot hole sizes must be adhered to at all times and if any instructions are supplied by the window system manufacturers/suppliers, such as “screw into reinforcement”, it is important that they are followed.

2.3.6

When fitting, extreme care must be taken not to strip the thread as deterioration in performance will result.

2.3.7

It has been shown that Austenitic and certain types of modified Martensitic fixings provide superior corrosion resistance when subject to BS 7479.

Fig. 4

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

ANCILLARY DEVICES COMMERCIAL PULL-IN BLOCKS

SHEET 5 of 5

ISSUE: March 2008

FITTING INSTRUCTIONS: Fixing Hole Reference 2.4

Fixing Holes References

2.4.1

Dimensions of Commercial Pull-In Block. Please see below, Fig. 5.

Fig. 5

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

ANCILLARY DEVICES COMMERCIAL PULL-IN BLOCKS

SHEET 1 of 1

ISSUE: March 2008

PERFORMANCE AND MAINTENANCE

Performance and Maintenance

Environmental Constraints: 3.1

3.2

Normal operating conditions are: 3.1.1

Operating temperature range, - 20°C to + 60°C.

3.1.2

Operating humidity range 10% Relative Humidity to 95% Relative Humidity.

The materials used will not degrade due to ultra violet light, or when using neutral acidity non solvent cleaning chemicals, at a rate faster than other parts of the window assembly.

Performance: 3.3

The commercial pull in blocks are a specially designed hardware product to help maintain effective weather seal on large commercial top hung windows.

3.4

The commercial pull in blocks are designed specifically for use with Sterling and Storm Balanced hinges, ensuring compatibility and performance is met.

3.5

Use of the commercial pull in blocks with other manufacturer’s hinges is not recommended; furthermore such use will invalidate the guarantee.

Maintenance: 3.6

Other than periodic visual inspection for loose fixings and degradation, no specific maintenance is required.

3.7

If cleaning is required, use a mild detergent or a damp cloth, do not use acid, alkaline, solvent or abrasive cleaning agents or materials.

Operating Life: 3.8

To attain the optimum operating life of the commercial pull in blocks, all of the criteria listed above under; environment constraints, maintenance and lubrication must be adhered to.

3.9

Securistyle commercial pull in blocks will function for about 50,000 cycles under normal conditions of use. This performance is also subject to compliance with Securistyle installation and maintenance instructions.

Corrosion Resistance: 3.10

When subjected to a 480 hour neutral salt spray test to BS 7479:1991 the commercial pull in blocks show slight degradation of plated surface, but will remain functional and pass all stated criteria.

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk

ANCILLARY DEVICES COMMERCIAL PULL-IN BLOCKS

SHEET 1 of 1

ISSUE: March 2008

PRODUCT SPECIFICATION

Product Specification

Product and Materials Specification: 4.1

All versions: Zinc Alloy to ASTM A41A, Zinc plated and passivated. 4.1.1

Surface Finish – Die cast components of uniform finish. Visible surfaces will not display blemishes, pits or scratches of greater than 15 sq. mm or 0.2mm maximum depth.

Standards Applicable to Commercial Pull in Blocks: 4.2

The relevant standards applicable are: 4.2.1

BS 7479:1991 / ISO 9227:1990(E) Corrosion tests in artificial atmospheres – Salt spray tests.

Securistyle Ltd. Kingsmead Industrial Estate Princess Elizabeth Way, Cheltenham, Gloucestershire, GL51 7RE Tel: +44 (0) 1242 221200 Fax: +44 (0) 1242 520828 Web: www.securistyle.co.uk