STROMQUELLEN ANWENDUNGSBEISPIELE
Konverter & Zubehör S21 LED Netzteil - 24V / 60 Watt
Varianten !
Eingang !
Ausgang !
Art. Nr. !
60 Watt (fernsteuerbar)
120-277V
24V, 2,5A
82369
Stand 03-2013 Ansteuerbar mit Kontrollspannung 0...10VDC
DC 24V
S21 LED Netzteil - 24V / 100 Watt Varianten !
Eingang !
Ausgang !
Art. Nr. !
100 Watt (fernsteuerbar)
120-277V
24V, 4,2A
82370
Ansteuerbar mit Kontrollspannung 0...10VDC
Synergy 21 Netzteile -
DC 24V
Mögliche Anwendungsbeispiele
LED Netzteile für jeden Einsatzort und in verschiedenen Leistungsklassen finden Sie hier.
Unser umfangsreiches Portfolio bietet für vielfälltige Anwendungen die optimale Lösung. 98 Ob U STROMQUELLEN UÊ24Volt fernsteuerbar zum Einbau in der Decke bis hin zum IP67 geschützten
92 U STROMQUELLEN 104 U INFORMATIONEN U Anwendungsbeispiele
Netzteil für den Außenbereich.
12~35W Single Output LED Power Supply Features • Universal AC input / Full range • Fully isolated plastic case • Protections: Short circuit / Overload (APV only) / Over voltage • Constant voltage design (C.V. mode) for APV series • Constant current design (C.C. mode) for APC series • IP30 design • Withstand 300VAC surge input for 5 seconds (APV/C-25/35)
APV-12/16
• Class 2 power unit / Pass LPS • Isolation class II, no F.G. • Cooling by free air convection • 100% full load burn-in test • Low cost, high reliability • Suitable for LED lighting and moving sign applications • 2 years warranty
APC-12/16
APV-25/35
APC-25/35
NE W
INPUT O UTP U T
AC input voltage range
90~264VAC ; 127~370VDC
start, 70A at 230VAC 18~100WAPC/V-12: SingleCold Output LED Power Supply
AC inrush current (max.)
APC-16: Cold start, 45A at 230VAC APV-16: Cold start, 50A at 230VAC
Cold start, 45A at 230VAC
Features Range >105% rated output current Overload (APV only) protection Type / Full Hiccup up mode, auto-recovery• Isolation class II, no F.G. • LPV: Universal AC input range • Withstand 300VAC surge input for 5 seconds (except for LPH/LPL-18) LPH-18: 180~264VAC only Over voltage protection input110%~145% rated output voltage • Cooling by free air convection LPL - 18: 90~132VAC input only Withstand voltage I/P-O/P: 3.75kVAC • 100% full load burn-in test •Working Fully encapsulated level OC (refer to output derating temperaturewith IP67 -30~+70 curve) • Lowperiod cost, high reliability •Vibration Protections: Short circuit / 10~500Hz, Overload / Over / /1 cycle, 2G 10voltage minutes for 60 minutes each along X, Y, Z axes Suitable for LED-based decorative/architectural lighting, LED stage Over temperature (LPH-18/LPL-18 only) refer•to Safety standards UL8750 approved; Design TUV EN60950-1 Design refer to TUV EN60950-1, UL8750 and theater lighting, and LED electronic displays • Constant voltage design (C.V. mode) EN55015, EN61000-3-2 class A, EN61000-3-3, EN55022 class B, EN61000-3-2 class A, standards • 2 years warranty •EMC Class 2 power unit / Pass LPS (except for LPV-100) EN61000-4-2,3,4,5,6,8,11, EN61547 EN61000-3-3, EN61000-4-2,3,4,5,6,8,11 Input
Connection
UL rated, 18AWGx2C (15cm) LPL-18 LPH-18
LPV-20
Output UL rated, 20AWGx2C (15cm)
Dimension (LxWxH)(mm)
77x 40x 29
INPUT
APV-12 Series
84x 57x 29.5
APC-12 Series
(C.V. mode)
Model No.
LPV-100
ULLPV-35 rated, 18AWGx2C (15cm) LPV-60 UL rated, 18AWGx2C (15cm)
(C.C. mode)
Output OUTPUT APV-12-5 5V, 0~2.0A APV-12-12 12V, 0~1.0A APV-12-15 15V, 0~0.8A
Tol.
R&N
Effi.
Model No.
Output
Io Tol.
R&N
Effi.
±5% ±5% ±5%
100mV 120mV 120mV
76% 82% 82%
APC-12-350
9~36V, 350mA
±8%
300mV
82%
APC-12-700
9~18V, 700mA
±8%
250mV
80%
APV-12-24
±5%
150mV
84%
24V, 0~0.5A
AC input voltage range
APV-16 Series
90~132VAC
180~264VAC
(C.V. mode)Cold start,
90~264VAC
APC-16 Series
Cold start, Cold start, AC inrush current (max.) Model No. 18~60W Single Output LED Effi. Power Supply 115VAC 50A 70A at 230VAC Model No. Output 40A at Tol. R&N at 230VAC
APV-16-5 Overload APV-16-12 Protection Features APV-16-15
APC-16-350 5V, 0~2.60A>105% ±5% 100mV 76% 110%~150% Range APC-16-700 12V, 0~1.25A ±5% 120mV 80% Type Hiccup mode, auto-recovery 15V, 0~1.00A ±5% 120mV 81%
voltage protection output voltage •Over LPC: Universal AC input115%~135% / Full ±5% rangerated APV-16-24 24V, 0~0.67A 150mV 83% Withstand voltage I/P-O/P: 3kVAC LPHC-18: 180~264VAC input only
APV-25 (C.V. mode)-30~+70 O C Working Series temperature
(C.C. mode)
(for 350mA)
Cold start, Cold start, Output Io Tol. 55A at 230VAC 60A at 230VAC
(for 700mA)
Cold start, R&N Effi. 75A at 230VAC
12~48V, 350mA
±8%
300mV
84%
9~24V, 700mA
±8%
250mV
83%
• Class 2 power unit / Pass LPS
APC-25 Series
(C.C. mode)
• Isolation class II, no F.G. O O Model No. Output Io Tol. -30~+65 C -30~+70 C • Cooling by free air convection
O R&N -25~+70 C Effi. LPL C -18: 90~132VAC input only Model No. Output Tol. R&N Effi. APC-25-350 25~70V, 350mA ±8% 300mV 83% for full 60 minutes each along •Vibration Fully encapsulated with10~500Hz, IP67 level 2G 10 minutes /1 cycle, period • 100% load burn-in test X, Y, Z axes APV-25-5 5V, 0~3.5A ±5% 120mV 75.5% APC-25-500 15~50V, 500mA ±8% 300mV 83% TUV EN60950-1(LPV-20 only), • Protections: Short circuit / Over / • Low cost, high reliability APV-25-12 12V, 0~2.1A ±5%voltage 150mV 82.0% TUV EN60950-1, EN61347-1, APC-25-700 11~36V, 700mA ±8% 300mV 83% IEC61347-1, IEC61347-2-13 (LPV-35 only), APV-25-15 15V, 0~1.68A ±5% 150mV 83.0% Over temperature ( LPLC/LPHC-18 only ) • Suitable for LED-based decorative / architectural lighting, Safety standards EN61347-2-13 approved for UL1310 (except for LPV-60-5 & LPV-100), APV-25-24 current 24V, 0~1.05A 83.0% APC-25-1050 1050mA ±8% LED electronic 300mV 83% • Constant designLPH-18 (C.C.±5% mode) 150mV LED stage and9~24V, theater lighting, and displays APV-25-36 36V, 0~0.7A ±5% 150mV 84.0% UL879 (except for LPV-35/100 & LPV-60-5) approved • Withstand 300VAC surge input for 5 seconds • 2 years warranty EMC standards FCC part 15 class B EN55022 class B, EN61000-3-2 classSeries A, EN61000-3-3, EN61000-4-2,3,4,5,6,8,11 APC-35 (C.C. mode) APV-35 (C.V. mode) (exceptSeries for LPHC/LPLC-18) Input UL rated, 18AWGx2C 18AWGx2C (30cm) UL rated, Model No. Output Io(60cm) Tol. R&N Effi. Model No. Output Tol. R&N Effi.
Connection APV-35-5
2
(30cm) 76.5% 18AWGx2C rated,350mA 5V, 0~5.0A UL rated,18AWGx2C ±5% 120mV APC-35-350 UL 28~100V, ±8% Output LPHC-18 LPLC-18 LPC-20 LPC-35 16AWGx2C (60cm) APV-35-12 12V, 0~3.0A ±5% 150mV 83.0% (60cm) APC-35-500 25~70V, 500mA ±8% APV-35-15 (LxWxH)(mm) 15V, 0~2.4A 140x 30x ±5%22 150mV 84.0% 118x 35x 26 Dimension 148x 40x 30 162.5x 42.5x 32 APC-35-700 15~50V, 700mA ±8% APV-35-24 24V, 0~1.5A ±5% 180mV 84.0% IN PUT APC-35-1050 11~33V, 1050mA ±8% APV-35-36 ±5% 180mV 85.0% LPL-18 Series36V, (C.V.0~1.0A mode) LPV-35 Series (C.V. mode) (LVD) Model No. LPL-18-12
Output OUTPUT 12V, 0~1.5A
Tol.
R&N
Effi.
±3%
120mV
80%
LPL-18-24
24V, 0~0.75A
±3%
150mV
83%
LPL-18-36
36V, 0~0.5A
±3%
200mV
84%
AC input voltage range
LPH-18 Series
90~132VAC
(C.V. mode)
180~264VAC
Model No. LPV-35-5 LPV-35-12 LPV-35-15 LPV-35-24 LPV-35-36
90~264VAC
Output 5V, 0~5.0A (peak 6A) 12V, 0~3.0A 15V, 0~2.4A 24V, 0~1.5A 36V, 0~1.0A
LPV-60 Series
(C.V. mode)
Tol. ±6% ±5% ±5% ±5% ±5%
UL rated, 350mV 84% LPC-60 14AWGx2C (30cm) 350mV
84%
190x 52x 37 84% 350mV 350mV
84%
R&N 80mV 120mV 120mV 150mV 150mV
Effi. 77% 84% 84% 85% 85%
(for 48V only)
(for 12~36V)
30~60W Single Output LED Power Supply Features • Universal AC input / Full range
• Class 2 power unit / Pass LPS
• Fully isolated plastic case with IP64 level
• Isolation class II, no F.G.
• Built-in constant current limiting circuit with adjustable OCP level
• Cooling by free air convection
• Protections: Short circuit / Over current / Over voltage
• Suitable for economical LED indoor lighting and LED electronic
• Optional dimming function: 1.1~10VDC(D type) or PWM (P type) controlled
displays • 2 years warranty
ELN-30
ELN-60
INPUT O UTP U T (standard)
O UT P U T (Dimming Funct ion)
AC input voltage range
90~264VAC ; 127~370VDC
AC inrush current (max.)
Cold start, 55A at 230VAC
DC adjustment range
±10% rated output voltage
16~ 60W Current adjustment range Over current protection
Cold start, 60A at 230VAC
Single Ou t pu t AC Di m m abl e Pow e r Un i t 75%~103% 95%~110% constant current limiting, auto-recovery
Range
110%~150% rated output voltage Over voltage Features protection Type Shutwith down o/p voltage, re-power on to•recover IP30 design •AC phase-cut dimming, work leading edge and • Class 2 power unit / Pass LPS (PCD-16/25) trailing edge TRIAC dimmers Withstand voltage I/P-O/P: 3kVAC • Isolation class II, no F.G. •PCD-16/25: 115VAC or 230VAC input O Working temperature -20~+60 C (refer to output derating curve) • Protections: Short circuit / Over temperature PCD-40/60: 230VAC input only Vibration 10~500Hz, 2G 10 minutes /1 cycle, period for 60 minutes each along X, Y, Z axes • Cooling by free air convection • Built-in active PFC function Safety standards UL1310 approved; Design refer to TUV EN60950-1 • 3 years warranty • Fully isolated plastic case standards •EMC Constant current design EN55022 class B, EN61000-3-2 class A, EN61000-3-3, EN61000-4-2,3,4,5,6,8,11 Input UL rated, SVT 18AWGx2C (32cm) UL rated, SVT 18AWGx2C (30cm)
PCD-16/25 Without dimming: UL rated, SVT 18AWGx2C (32cm) With dimming(optional): UL2464 18AWGx4C (32cm)
Without dimming:PCD-40/60 UL rated, SVT 18AWGx2C (30cm) With dimming(optional): UL2464 18AWGx4C (30cm) N
Dimension (LxWxH)(mm)
145x 47x 30
181x 61.5x 35
Packing
0.26kg ; 60pcs / 16.6kg
0.4kg ; 24pcs / 11.0kg
Connection
Output
INPUT
(A t y p e )
INPUT
OUTPUT
(B t y p e ) ELN-30 Series
Model No. ELN-30-5
(for 48V only)
ELN-60 Series
(for 5~27V)
Output
Tol.
R&N
Effi.
Model No.
5V, 0~5.0A
±5%
80mV
75%
ELN-60-9
AC input voltage9V, range ELN-30-9 0~3.4A 115VAC ±5%(90~135VAC) 100mV or 230VAC 80% (180~295VAC) ELN-30-12
12V, 0~2.5A
±5%
120mV
ELN-30-24
ELN-60-12
82%
AC inrush current (max.) 230VAC ELN-30-15 15V, 0~2.0A Cold start, ±5% 10A at 120mV
ELN-60-15
82%
16~ 60W Single Ou150mV t pu t wit85% h PFC 24V, 0~1.25A ±5%
Withstand voltage I/P - O/P: 3.75kVAC ELN-30-27 27V, 0~1.12A ±5% 150mV
EW
ELN-60-24
Tol.
(for 9~27V)
R&N
Effi.
9V, 0~5.0A
±5%
120mV
82%
12V, 0~5.0A
±5%
120mV
85%
PCD-40: Cold start, 11A 15V, 0~4.0A ±5% at 230VAC 150mV PCD-60: Cold start, 13A at 230VAC
86%
230VAC (180~295VAC)
ELN-60-27
85%
(for 48V only)
Output
24V, 0~2.5A
±5%
150mV
87%
27V, 0~2.3A
±5%
200mV
87%
Working temperature to output derating curve) ELN-60-48 -30~+50ºC (refer to output derating ELN-30-48 48V, 0~0.63A -30~+60ºC ±5% (refer250mV 87% 48V, 0~1.3A ±5% 250mVcurve) 88% Features Safety standards UL8750 (PCD-16/25 ENEC EN61347-1,•EN61347-2-13, EN62384(B-Type only) approved (PCD-40/60 pending) Class 2 power unit / Pass LPS (PLD-16/25) •PLD-25: Universal AC input (up to 295VAC)only), / Full range (optional) Control ► ►Dimming D Type : P Type : A-Type: FCC part 18 non-consumer equipment • Isolation class II, no F.G. PLD-16: 115VAC or 230VAC input EMC standards 1.1~10Vdc external control signal PWM control signal B-Type: EN55015, EN61000-3-2 class C, EN61000-3-3, EN61000-4-2,3,4,5,6,8,11, EN61547 • Protections: Short circuit / Over temperature PLD-40/60: onlyoutput current of Through the230VAC dimminginput function, V
• Suitable indoor LED(7.5cm) lighting applications •Built-in active PFC function Input A-Type: UL1430 18AWGx2C (7.5cm); B-Type: NISPT-1 DIM+for 18AWGx2C ELN series can be adjusted to reduce the energy f: 100Hz ~ 3KHz Connection • Cooling by free air convection • Fully isolated plastic case Output UL1430 18AWGx2C (15cm) consumption or adjust the brightness of LEDs f ELN + • 3 years warranty •Dimension Constant current design 84x 57x 29.5 (LxWxH)(mm) 128x 60x 31.5 10V connecting to it. Two kinds of control signal are Control input Vdc • IP30 design accepted: 1.1~10VDC (D-type option) or PWM
PCD-16 Series
signal (P-type option).
Mod e l N o . INPUT PCD-16-350 (A-Type) PCD-16-700
(for 350mA) (for 700~1400mA)
(B Type)
PCD-60 Series
PLD-25
ENEC/CB/CE pending
t1
f PLD-60
t2
Io T ol.
R& N
E ffi.
24~48V, 350mA
±5%
4.6V
82.0%
16~24V, 700mA
±5%
2.7V
PCD-60-700B 81.0% Order No.: ELN- 30 - 5 D PCD-60-1050B
50~86V, 700mA ± 5% 5.6V Order No.: ELN- 30 - 5 P 34~57V, 1050mA ± 5% 3.8V
±5%
2.2V
80.5%
PCD-60-1400B
25~43V, 1400mA
±5%
3.4V
85%
80.0%
PCD-60-1750B
20~34V, 1750mA
±5%
3.3V
85%
INPUT 1050mA PCD-16-1050 O U T P U12~16V, T 8~12V, 1400mA
±5%
2.0V
AC input voltage range
115VAC (90~135VAC) or 90~295VAC 230VAC (180~295VAC)
(for 350/700mA) (for 1050/1400mA)
(B Type) (A Type)
Cold start, Io Tol . el No. AC Mod inrush current (max.) O ut put 20A at 230VAC
Model DIM- No.
Vdc 1.1~10V PCD-60-500B
= A o r B-T y p e ; A -T y pe: 90~135VAC , B-Type: 180~295V AC
PCD-25 Series
PLD-40
Io Tol .
O ut p ut
( B-Type & PLD-25)
PCD-16-1400
(B Type) (A Type)
PLD-16
(B Type)
start, R& NColdEffi.
15A at 230VAC
Ou tpu t
R&N t1 , 0~100% Low: 0V Duty= 65~115V, 500mA ±5% High:10.2V t1+t2 10V
E f f i.
N87% EW 86%
86%
PCD-60-2000B
18~30V, 2000mA
± 5%
2.4V
85%
PCD-60-2400B
15~25V, 2400mA
± 5%
2.4V
84%
230VAC (180~295VAC) ► ►Dimmer Compatibility Chart Ma n u fa c tuCold rer start,
25A at 230VAC
Dimmer Model
5
12~ 40 W Single O u t pu t wi t h PFC Features • Universal AC input (up to 295VAC) / Full range
• Isolation class II, no F.G.
• Built-in active PFC function
• Cooling by free air convection
• Protections: Short circuit / Over temperature(PLM-40)
• Low cost, high reliability
• Fully isolated plastic case
• Suitable for indoor LED lighting applications
• Constant current design
• 2 years warranty
• IP30 design
PLM-12
PLM-25
PLM-40
De U ve nd lop er me nt
AC input voltage range AC inrush current 16~ (max.) 90W
De U ve nd lop er me nt
90~295VAC; 127~417VDC Cold start, at 230VAC Single O 40A u t pu t wit h PFC
Setup time
2000ms at full load and 230VAC
1500ms at full load and 230VAC
Features
Short circuit protection Hiccup mode, auto-recovery • Universal AC input (up to 305VAC) / Full range • Built-in 3 in 1 dimming function •Over Protections: Short circuit /95ºC Over±10ºC current / Over voltage / voltage, (1~10VDC, or resistance) for D type temperature (PLM-40) (RTH1) shut down o/p re-powerPWM on tosignal recover Over temperature • Fully encapsulated with IP67 level [optional for LPF-16(D)] •Withstand Built-in active • Cooling by free air convection voltagePFC function I/P-O/P: 3.75kVAC • Fully isolated plastic case • Suitable for LED lighting and moving sign applications temperature to output derating curve) •Working Isolation class II, no F.G. -30~+45ºC (refer to output derating curve) • Suitable for dry,-30~+50ºC damp, and(refer wet location • Class 2 power unit / Pass LPS • 3 years warranty Safety standards Design refer to UL8750, ENEC EN61347-1, EN61347-2-13, EN62384
LPF-16(D)/25(D)
EMC standards
LPF-40(D)/60(D)
LPF-90(D)
Design refer to EN55015, EN61000-3-2 class C, EN61000-3-3, EN61000-4-2,3,4,5,6,8,11, EN61547
NE
INPUT
W Connection (Input / Output) 2+2P push terminal block O UT PU T
(Non-Dimming Dimension Function) (LxWxH)(mm)
145x 38x 22
175x 42x 24
O UT PU T (Dimming
PLM-12 Function)Series
UL/CUL/ENEC/CB/CE pending
Model No.
Io Tol.
Output
R&N
AC input voltage range
90~305VAC ; 127~431VDC
PLM-12-350
±5% LPF-16(D): Cold start,3.6V 45A LPF-25(D): Cold start, 50A
18~36V, 350mA
AC inrush current (max.) PLM-12-500
Effi.
PLM-40 Series
UL/CUL/ENEC/CB/CE pending
Model No.
Io Tol.
Output
R&N
Effi.
LPF-40(D): PLM-40-350 Cold start, 50A53~105V, 350mA ±5% 10V Cold start, 55A at 230VAC
88%
85%
LPF-60(D): Cold start, 55A 12~24V, Single 500mA 84% 30~ 96W O±5% u t pu t 2.4V wit h PFC
Over current protection
95% ~108% constant current, auto-recovery
Over voltage protection
110%~150% rated output voltage
PLM-12-700
9~18V, 700mA
±5%
1.8V
83%
PLM-40-500
40~80V, 500mA
±5%
8V
87%
Features PLM-12-1050 ±5% 1.2V 82% Withstand voltage 6~12V, 1050mA I/P - O/P: 3.75kVAC • Universal AC input / Full range • Isolation class II, no F.G. for PLC-30 ±5% 6V 86% Working temperature -35~+70ºC -40~+70ºCPLM-40-700 (refer to output 28~55V, derating700mA curve) Seriesplastic case with screw •PLM-25 Fully isolated terminal style of I/O • Cooling by free air convection UL/CUL/ENEC/CB/CE pending UL8750, ENEC EN61347-1, EN61347-2-13, EN62384, PSE J61347-1, J61347-2-13 approved for LPF-16(D)/25(D); •Safety Built-in constant current limiting circuit (C.V.+C.C. mode)Effi. •PSE Protections: Short circuit approved / Over current / Over voltage / Modelstandards No. Output Io Tol. R&N EN61347-2-13, UL8750, TUV EN61347-1, J61347-1, J61347-2-13 for±5% LPF-40(D)/60(D)/90(D) PLM-40-1050 19~38V, 1050mA 4V 86% •EMC Adjustable output voltage and current level Over temperature standards EN55015, EN61547, EN61000-3-2 PLM-25-350 36~72V, 350mA ±5% 7.2V 88%class C, EN61000-3-3, EN61000-4-2,3,4,5,6,8,11 • Built-in active PFC function, PF>0.9SJTW for 75% of load (30cm) or higher • 100% full load burn-in test Input UL rated, 18AWGx2C PLM-25-500 25~50V, 500mA ±5% 5.0V 87% PLM-40-1400 15~29V, 1400mA ±5% 3V 85% • High efficiency up to 89%LPF-16/25: LPF-40/60:• Suitable for LED lightingLPF-90: and moving sign applications UL rated, SVT ±5% 18AWGx2C (30cm) 86% UL rated, SVT 18AWGx2C (30cm) UL rated, SVT 18AWGx2C (30cm) PLM-25-700 18~36V, 700mA 3.6V •Connection Class 2 power unit / Pass LPS • 2 years warranty Output PLM-25-1050
LPF-16D/25D: UL rated, SJTW±5% 18AWGx4C (30cm) 12~24V, 1050mA 2.4V
Dimension (LxWxH)(mm)
8
LPF-16
Series
Mod e l N o . LPF-16 LPF-16 LPF-16 LPF-16 LPF-16 LPF-16
PLC-30
148x 40x 32
-12 -15 -20 -24 -30 -36
TUV Rheinland Product Safety
LPF-40D/60D: UL2464 LPF-90D: PLM-40-1750 12~23V, 1750mA ±5% 2.5V 18AWGx2C(30cm)+22AWGx2C (30cm) UL2464 18AWGx4C (30cm) 86%
Model No.
Ou tput
Tol .
R& N
E ffi.
12V, 0~1.34A 15V, 0~1.07A 20V, 0~0.80A 24V, 0~0.67A 30V, 0~0.54A 36V, 0~0.45A
±4.0% ±4.0% ±4.0% ±4.0% ±4.0% ±4.0%
150mV 150mV 150mV 150mV 200mV 250mV
83.0% 83.0% 84.5% 84.5% 84.5% 85.0%
AC input voltage range
90~264VAC ; 127~370VDC
PLC-60 161x 61x 36 PLC-100
162.5x PLC-45 43x 32
PS E
LPF-40 LPF-40 LPF-40 LPF-40 LPF-40 LPF-40
LPF-60
85%
-24 -30 -36 -42 -48 -54
Series
Ou tpu t
T ol.
R&N
E f f i.
24V, 0~1.67A 30V, 0~1.34A 36V, 0~1.12A 42V, 0~0.96A 48V, 0~0.84A 54V, 0~0.76A
±4.0% ±4.0% ±4.0% ±4.0% ±4.0% ±4.0%
150mV 200mV 250mV 250mV 250mV 350mV
87.0% 88.0% 88.0% 88.5% 89.0% 89.0%
(for 48~54V)
(for 12~42V)
TUV Rheinland Product Safety
PS E
20~96W Single Output with PFC Features • Isolation class II, no F.G. for PLN-20/30 • User adjustable output voltage (except for PLN-20) and current protection level • Cooling by free air convection • Suitable for LED lighting and moving sign applications • 2 years warranty
• Universal AC input (up to 295VAC) / Full range • Fully isolated plastic case with IP64 level • Built-in active PFC function, PF>0.9 for 75% of load or higher • Protections: Short circuit / Over current / Over voltage / Over temperature • Built-in constant current limiting circuit (C.V.+C.C. mode) • Class 2 power unit / Pass LPS
PLN-20
PLN-30
PLN-45/60
PLN- 100
INPUT PLN-20
PLN-30
PLN-45/60/100
O UT P U T PLN-20
PLN-30/45/60/100
90~277VAC; 127~392VDC 90~295VAC ; 127~417VDC AC input voltage range AC inrush current (max.) Cold 35A at with 230VACPFC 40~80W Singlestart, Output
DC adjustment range
None
Cold start, 40A at 230VAC 85%~100% rated output voltage
95%~108% rated output voltage
Current adjustment range Features
75%~100% 95%~110% constant • Universal AC input (up to 305VAC) / Full range Over current protection current limiting, • Fully isolated plastic case with IP64 level auto-recovery
75%~103% 100%~110% constant 95%~110% constant 95%~102% constant • Suitable for dry, damp location current limiting, current limiting, current limiting, • Suitable for auto-recovery LED lighting and movingauto-recovery sign applications auto-recovery • Multiple models for choice: • Built-in active PFC function, PF> 0.9 for 60% of load or higher 105%~142% 110%~155% 115%~140% 107%~135% Over voltage protection rated output voltage rated outputA-Type: voltageIP64 rated output voltage rated output current voltagelevel rated. Output voltage and constant • Protections: at temperature 2000ms(setup time) at time) atinternal potentiometer can1500ms(setup be adjusted through Short circuit / Over current2300ms(setup / Over voltagetime) / Over 1200ms, 80ms, 60ms Setup, rise, hold up time full load and 230VAC, full load and 230VAC, full load and 230VAC, B-Type: IP64 rated and built-in 3 in at 1 dimming • Built-in constant current limiting circuit (C.V.+C.C. mode) full load function and 230VAC no hold up time no hold up time no hold up time (1-10VDC, PWM signal, or resistance) • Class 2 power unit / Pass LPS Withstand voltage I/P-O/P: 3.75kVAC I/P-O/P: 3.75kVAC I/P-FG: 2kVAC O/P-FG: 0.5kVAC • 3 years warranty • High efficiency up to 91% Working temperature -30~+60 O C -30~+50 O C (refer to output derating curve) • Cooling by free air convection UL8750, TUV EN61347-1, EN61347-2-13, PSE J61347-1, J61347-2-13 approved for PLN-20 Safety standards EMC standards INPUT
Input Output Dimension (LxWxH) (mm) Connection
OUTPUT
UL879, UL1310, UL8750(PLN-45/60), TUV EN61347-1, EN61347-2-13,PSE J61347-1, J61347-2-13 approved for PLN-30/45/60 HLN-40H HLN-60H HLN-80H UL879, UL1310, UL8750, TUV EN61347-1, EN61347-2-13, EN60950-1, PSE J61347-1, J61347-2-13 approved for PLN-100
EN55015, EN55022 class B (PLN-60/100 only), EN61000-3-2 class C, EN61000-3-3, EN61000-4-2,3,4,5,6,8,11, EN61547 UL rated, UL1015 18AWGx2C (32cm)
UL rated, SVT 18AWGx2C B A (32cm)
UL rated, SVT 18AWGx3C (30cm) UL rated, SVT 18AWGx2C (30cm)
B UL rated, SVT A 18AWGx2C (31cm)
148.5x 38.5x 28
145x 47x 30
181x 61.5x 35
200x 70.5x 35
Model No. Output PLN-45-20 20V, 0~2.3A Model No. Output Tol. R&N Effi. PLN-45-24 24V, 0~1.9A 12V, 0~1.6A 90~305VAC; ±10% 2.5V 80.0% PLN-45-27 27V, 0~1.7A ACPLN-20-12 input voltage range 127~431VDC PLN-45-36 36V, 0~1.25A PLN-20-18 18V, 0~1.1A ±10% 3.0V 81.0% AC inrush current (max.) Multiple-Stage Cold start, 50A atOutput 230VAC Current Cold start,LED 55A Power at 230VAC 40~60W Supply PLN-45-48 48V, 0~0.95A PLN-20-24 24V, 0~0.8A ±10% 3.0V 82.0%
PLN-20 Series
TUV Rheinland Product Safety
PS E
DC adjustment range
±10% rated output voltage (A-Type only)
Current adjustment range
60%~100%
PLN-20-36
36V, 0~0.55A
PLN-20-48
48V, 0~0.42A
±10%
3.0V
±10%
3.8V
83.0%
PLN-60 Series
83.5%
Model No. Features
Tol. ±10% ±10% ±10% ±10% ±10%
(for 48V only)
Output
UL rated, SVT 18AWGx3C (31cm)
R&N 1.8V 2.7V 2.7V 3.6V 4.6V TUV Rheinland Product Safety
(for 12~36V)
Tol.
Effi. 86.5% 86.5% 86.5% 87.5% 87.5% PS E
R&N
Effi.
LCM-40(DA) / 60(DA) Over current protection 95%~108% constant current limiting, auto-recovery PLN-60-12 12V, 0~5.0A ±10% 2.0V 85.0% PLN-30 Series (for 48V only) (for 9~36V) • Output current15V, level0~4.0A selectable by DIP switch2.4V PLN-60-15 ±10% 86.0% Over voltage protection (for 9~36V) 109%~150% rated output voltage PLN-60-20 20V, 0~3.0A ±10% 1.8V 87.5% Model No. Output Tol. R&N Effi. • 180~295VAC input only Setup, rise, hold up time 1000ms, 80ms, 16ms at full load and 230VAC PLN-60-24 24V, 0~2.5A ±10% 2.7V 87.0% PLN-30-9 9V, 0~3.3A ±10% 2.6V 80.0% • Built-in active PFC Withstand 2kVAC, O/P-FG:0.5kVAC PLN-60-27 27V, function 0~2.3A ±10% 2.7V 88.0% PLN-30-12voltage 12V, 0~2.5A I/P-O/P: ±10%3.75kVAC, 2.0V I/P-FG:82.5% Protections: voltage / Over temperature PLN-60-36 Short 36V,circuit 0~1.7A/ Over ±10% 3.6V 89.0% Working temperature to output83.5% derating • curve) PLN-30-15 15V, 0~2.0A -40~+50 ±10%O C (refer 2.6V PLN-60-48 0~1.3A ±10% 4.6V 89.0% • Cooling by free48V, air convection PLN-30-20 20V, 0~1.5A ±10% 2.6V 84.0% UL8750, TUV EN61347-1, EN61347-2-13, PSE J61347-1, J61347-2-13 approved; Safety standards PLN-30-24 24V, 0~1.25A ±10% 2.6V 84.0% • Fully isolated plastic case PLN-100 Series (for 12~36V) Design refer to UL/EN60950-1, EN60335-1for HLN-40H/60H (for 48V only) PLN-30-27 27V, 0~1.12A ±10% 2.3V 84.5% • Class II power unit, no F.G. Model No.EN61000-4-2,3,4,5,6,8,11, Output Tol. R&N Effi. EMC standards EN55015, EN61000-3-2 class C, EN61000-3-3, EN61547 PLN-30-36 36V, 0~0.84A ±10% 4.5V 85.0% PLN-100-12 ±3% 150mV 83.0% • IP20 design 12V, 0~5.0A PLN-30-48 48V, 0~0.63A ±10% 3.7V 85.5% Input UL rated, SVT 18AWGx3C (30cm) PLN-100-15 15V, 0~5.0A 150mV (LCM-40/60) 85.0% • Built-in 0~10Vdc and PWM signal±3% dimming function Connection PLN-100-20 0~4.8A SVT 18AWGx4C ±3% 150mV 88.5% Output A-Type: UL rated, SVT 18AWGx2C (30cm) ; B-Type: 20V, UL rated, (30cm) • Built-in DALI interface and push dimming (LCM-40DA/60DA) PLN-45 Series (for 48V only) (for 12~36V) PLN-100-24 24V, 0~4.0A ±3% function 150mV 88.5% Dimension (LxWxH) (mm) 161x 61.5x 35 181x 61.5x 35 • Built-in 12V/50mA auxiliary output PLN-100-27 27V, 0~3.55A ±3% 150mV 88.0% Model No. Output Tol. R&N Effi. PLN-100-36 36V, 0~2.65A function ±2% by external 150mV PLN-45-12 12V, 0~3.8A ±10% 2.0V 83.5% • Temperature compensation NTC 88.0% PLN-100-48 48V, 0~2.0A ±2% 200mV 88.5% PLN-45-15Series 15V, 0~3.0A(for 48~54V) ±10%(for 12~42V) 2.4V 85.0% HLN-40H • NoModel load power consumption No. Output <1W (LCM-40/60) Tol. R&N Effi. Model No. Output Tol. R&N Effi. No load power <1.2W ±1.0% (LCM-40DA/60DA) HLN-60H-36 A consumption 36V, 0~1.70A 200mV 90.0% • Power supplies 10 units 90.0% HLN-40H-12 A 12V, 0~3.33A ±2.5% 150mV 86.5% HLN-60H-42 A synchronization 42V, 0~1.45A function ±1.0%up to300mV • Suitable for indoor LED lighting applications HLN-40H-15 A 15V, 0~2.67A ±2.0% 150mV 86.5% HLN-60H-48 A 48V, 0~1.30A ±1.0% 300mV 90.5% • 3 years warranty HLN-40H-20 A 20V, 0~2.00A ±1.0% 150mV 87.5% HLN-60H-54 A 54V, 0~1.15A ±1.0% 300mV 90.5% HLN-40H-24 A 24V, 0~1.67A ±1.0% 150mV 88.0% = A or B TUV Rheinland Product Safety
PS E
NE W
TUV Rheinland Product Safety
TUV Rheinland Product Safety
TUV Rheinland Product Safety
PS E
PS E
PS E
AC input voltage 180~295VAC; HLN-40H-30 A range 30V, 0~1.34A ±1.0%254~417VDC 200mV 88.5%
11
20~ 60W Single O u t pu t wit h PFC Features • Universal AC input / Full range
• Class 2 power unit / Pass LPS
• Protections: Short circuit / Over current / Over voltage /
• Isolation class II, no F.G. for PLP-20 • Built-in constant current limiting circuit (C.V.+C.C. mode)
Over temperature (PLP-20 only) • Built-in active PFC function, PF>0.9 for 75% of load or higher
• Suitable for building in LED lighting systems
• Cooling by free air convection
• 2 years warranty
PLP-30
PLP-20
AC input voltage range
90~277VAC; 127~392VDC
AC inrush current (max.)
Cold start, 25A at 230VAC
Current adjustable range
75%~100%
PLP-45/60
90~264VAC; 127~370VDC PLP-45: Cold start, 30A at 230VAC PLP-60: Cold start, 35A at 230VAC
40~ 80W Single O u t pu t wit h PFC
95%~110% 100%~110% Over current Range Features protection Type Constant current limiting, auto-recovery • Class 2 power unit / Pass LPS • Universal AC input (up to 305VAC) / Full range 2300ms, 200ms at full load 1200ms(setup time) full load 1000ms(setup time) at full load • Cooling byatfree air convection •Setup, Protections: rise, hold up time and 230VAC, no hold up time and 230VAC, no hold up time and 230VAC, no hold up time • Suitable for built-in LED lighting system Short circuit / Over current / Over voltage / Over temperature voltagePFC, PF>0.95 I/P-O/P: 3.75kVAC I/P-O/P:•3.75kVAC, 2kVAC, O/P-FG: 0.5kVAC Built-in 3I/P-FG: in 1 dimming function •Withstand Built-in active -30~+70OC (refer to output curve) (1~10VDC, PWM derating signal, or resistance)
C •Working Output temperature constant current-30~+60 level adjustable O
• 3 years warranty •Safety Built-in constant current limiting circuit (C.V.+C.C. mode) standards UL8750, TUV EN61347-1, EN61347-2-13 approved EMC standards
EN55015, EN61000-3-2 class C, EN61000-3-3, EN61000-4-2,3,4,5,6,8,11, EN61547
Connection
UL1015 18AWGx2C (30cm) HLP-40H
Dimension (LxWxH)(mm)
140x 32x 22
3+2P / 3.96mm pitch, JST P/N: B3P / B2P-VH HLP-60H HLP-80H 101.6x 50.8x 26.6
PLP-20 Series Mod el N o .
101.6x 50.8x 29.6
PLP-45 Series
(for 48V only)
(for 12/24V)
O u t put
Tol .
R& N
Effi.
Model No.
Ou tpu t
Tol.
R &N
E f f i.
PLP- 2 0 -1 2
1 2 V , 0~1. 6A
±10%
2. 5V
80.0 %
P LP - 4 5- 12
1 2V , 0~3.8 A
± 10%
4 .2 V
86%
PLP- 2 0 -1 8
1 8 V , 0 ~1. 1A
±10%
3. 0V
81.0 %
P LP - 45- 24
24V , 0~1.9 A
±10%
3.8 V
89%
PLP- 2 0 -2 4
2 4 V , 0 ~0. 8A
±10%
3. 0V
82.0 %
P LP - 4 5- 48
4 8V , 0~0.9 5A
±10%
4.8 V
89%
PLP2 0 -3voltage 6 3 6 V , 0~0. 90~305VAC 55A ±10%; 127~431VDC 3. 0V 83.0 % AC input range
Cold start, 4 8 V , 0 ~0. 42A ±10%
PLP- 2 0 -4 8
AC inrush current (max.)
50A at 230VAC
Cold start, 83.5 % 55A at 230VAC
3. 8V
60~96W Single Output with PFC
PLP-30 Seriesrange DC adjustment
(for 48V only) (for 12/24V) ±10% rated output voltage
Mod el adjustment No. O u t put 60%~100% Tol . Current range
R& N
E ffi.
PLP-60 Series
(for 48V only)
Model No. Ou tpu t 80%~100%
(for 12/24V)
T ol.
R&N
E f f i.
Features Over current constant limiting, auto-recovery PLP3 0 -1 2 protection 1 2 V , 0~2. 95%~108% 5A ±10% 2. current 0V 8 3.0 % P LP - 60- 12 12V , 0~5.0 A ± 10% 4 .5 V 84% • Class 2 power unit Pass ALPS •Over Universal AC input (up to 295VAC) / Full range voltage protection 109%~145% rated output voltage PLP- 3 0 -2 4 2 4 V , 0~1. 3A ±10% 2. 4V 8 5.5 % P LP - 6024 24V ,/0~2.5 ± 10% 4 .5 V 88% • Cooling by free air200ms, convection •Setup, Protections: rise, hold up time 1000ms, 80ms, 16ms at full load and 230VAC 1000ms, 16ms at full load and 230VAC PLP- 3 0 -4 8 4 8 V , 0 ~ 0. 63A ±10% 4. 8V 8 6.5 % P LP - 60- 48 4 8V , 0~1.3 A ± 10% 4 .8 V 89% • Suitable for dry, damp, and wet location Short circuit / Over current / Over voltage / Over temperature Withstand voltage I/P-O/P: 3.75kVAC, I/P-FG: 2kVAC, O/P-FG:0.5kVAC Symbols for EN61347-2-13 ► ►Special Suitable for LED lighting and moving sign applications •Working Built-in active PFC function, PF>0.9 O for 75% of load or higher temperature -40~+70 C (refer to output derating •curve) • 3 years warranty • IP66 design Protection against overheating to prevent the lamp controlgear case temperature under any conditions of use from UL8750, TUV EN61347-1, EN61347-2-13 approved; 110 standards •Safety Meet 4kV surge immunity level (IEC61000-4-5) exceeding the indicated value (110 C) Design refer to EN60335-1(HLP-40H/60H), UL60950-1, EN60950-1 O
EN55015, EN61000-3-2 class C, EN61000-3-3, Suitable for direct mounting on normally flammable surfaces, suchEN61000-4-2,3,4,5,6,8,11, as wood (>2mm) CEN-100EN61547 CEN-60/75 Input Connection JST P/N: B6P-VH Based on6+6P/3.96mm VDE0710-14, canpitch, be installed inside a wooden material like wooden cabinet. M Output M The minimum distance between the product enclosure to wooden material in each side is defined. INPU T Dimension (LxWxH) (mm) 147x 53x 27 167x 53x 29.5 Limited power source F EMC standards
LPS o
tc: 80 C o Full load operation up (for to12~42V) 40 C with surface temperature of case < 80 OC (for 48V/54V) HLP-40H Series C ta: 40 O
Model No.
SELV
HLP-40H-12 14
OUTPUT Output
Tol.
R&N
Effi.
Vo< 120VDC can have this mark on the unit 12V, 0~3.33A ±2.5% 150mV 87.0%
HLP-40H-15 15V, 0~2.67A ±2.0% 150mV AC input voltage range 90~295VAC ; 127~417VDC HLP-40H-20 20V, 0~2.00A ±1.0% 150mV AC inrush current (max.) Cold start, 45A at 230VAC HLP-40H-24 24V, 0~1.67A ±1.0% 150mV DC adjustment range ±10% rated output voltage HLP-40H-30 30V, 0~1.34A ±1.0% 200mV Current adjustment range 75%~100% HLP-40H-36 36V, 0~1.12A ±1.0% 200mV Over current protection 95%~110% constant current
Model No.
HLP-60H-36
Tol.
R&N
Effi.
36V, 0~1.70A
Output
±1.0%
200mV
90.0%
87.0%
HLP-60H-42
42V, 0~1.45A
±1.0%
300mV
90.0%
88.0%
HLP-60H-48
48V, 0~1.30A
±1.0%
300mV
90.5%
88.0%
HLP-60H-54
54V, 0~1.15A
±1.0%
300mV
90.5%
88.5%
65%~100% 89.0% HLP-80H Series limiting, auto-recovery
(for 48V/54V)
(for 12~42V)
60~150W Single Output with PFC Features
• Universal AC input (up to 295VAC) / Full range • Protections: Short circuit / Over current / Over voltage / Over temperature • Built-in active PFC function, PF>0.9 for 75% of load or higher • IP67/IP65 design for indoor or outdoor installations (except for C-Type) • Output current adjustable through output cable or internal potentiometer (CLG-150) • Class 2 power unit / Pass LPS (CLG-60&100) • Cooling by free air convection • Suitable for LED lighting, street lighting and moving sign applications
C LG - 6 0
• Built-in constant current limiting circuit (C.V.+C.C. mode) • Meet 4kV surge immunity level (IEC 61000-4-5) • Multiple models for CLG-150 : A-Type: IP65 rated. Output voltage and constant current level can be adjusted through internal potentiometer B-Type: IP67 rated. Constant current level adjustable through output cable C-Type: Non IP. Terminal block for I/O connection Blank-Type: IP67 rated. Cable for I/O connection • 3 years warranty
CL G-1 0 0
C L G-1 5 0
INPUT
B
A
C
Blank
OUTPUT Class 2
AC input voltage range 40~60W AC inrush current (max.)
Class 2
90~295VAC; 127~417VDC High Efficiency with PFC
Cold start, 35A at 230VAC Cold start, 40A at 230VAC Cold start, 65A at 230VAC Fixed. Can be modified between 90%~110% (CLG-60) Can be adjusted between 85%~110% by internal DC adjustment range potentiometer (A and C-Type) or 85%~100% (CLG-100) rated output voltage Features Fixed. Can be modified between 75%~103% Can be adjusted between 50%~100% by internal potentiometer • Meet 4kV surge immunity level (IEC61000-4-5) •Current Universal AC input (up to 305VAC) / Full range adjustment range rated output current (A and C-Type) or through output cable (B-Type) • Class 2 power unit • Protections: 95%~110% constant 95%~102% constant Over 95%~108% current limiting, auto-recovery • Multiple modelsconstant for choice: Shortcurrent circuitprotection / Over current / Overauto-recovery voltage / Overcurrent, temperature current, auto-recovery A-Type: IP65 rated. Output voltage and constant current level •Over Built-in active PFC, PF>0.9110%~140% for 60% of rated load or higher voltage protection output voltage 110%~145% rated output voltage 3000ms(setup time), 1200ms, 80ms, 60ms can be adjusted through internal potentiometer • High efficiency up to 90.5% 3000ms, 80ms, 50ms at full load and 230VAC Setup, rise, hold up time at full load and 230VACB-Type: IP67 rated and built-in 3 in 1 dimming function no hold up time installations • IP67 / IP65 design for indoor or outdoor voltage I/P-FG: 2kVAC, O/P-FG: 0.5kVAC(1~10VDC, PWM signal, or resistance) •Withstand Output current adjustableI/P-O/P: through3.75kVAC, output cable or internal Working temperature -30~+70OC (refer to output derating curve) Blank-Type: IP67 rated. Cable for I/O connection potentiometer UL1310, UL8750, UL879, TUV EN61347-1, UL60950-1, UL1012, UL8750, TUV EN60950-1, D-Type(option): IP67 rated. Timer dimming function, contact • Cooling by free air convection EN61347-2-13, PSE J61347-1, EN61347-1, EN61347-2-13, PSE J61347-1, MEAN WELL for details. •Safety Suitable for dry, damp, and wet location standards J61347-2-13(option) approved; J61347-2-13(option, except for CLG-150 C-Type) • 5 years warranty • Suitable for LED lighting and street lighting applications TUV EN60950-1 for CLG-100 only approved EMC standards EN55015, EN55022 class B, EN61000-3-2 class C, EN61000-3-3, EN61000-4-2,3,4,5,6,8,11, EN61547 HLG-40H HLG-60H UL rated, SJTW 18AWGx3C (30cm); Terminal block for C type Input UL rated, SJTW 18AWGx3C (30cm) A & Blank-Type : SJTW 14AWGx2C (30cm) Connection B A Blank/D INPUT Output UL rated, SVT 18AWGx2C (30cm) B-Type: SJTW 14AWGx2C (30cm)+18AWGx2C (30cm) C-Type: Terminal block Dimension (LxWxH)(mm) 195.6x 61.5x 38.8 222.2x 68x 38.8 A/B/Blank-Type: 222.2x 68x 38.8; C-Type: 229x 68x 38.8 Packing 0.86kg ; 16pcs / 14.8kg 1.0kg ; 12pcs / 13kg 1.0kg ; 12pcs / 13kg OUTPUT
CLG-60 Series
(option)
(for 48V only) (for 12~36V)
90~305VAC ; 127~431VDC Tol. R&N Effi. 80~120W High Efficiency with PFC CLG-60-12 12V, 0~5.0A Cold ±10% AC inrush current (max.) start, 50A at2.0V 230VAC 85.0% ACModel inputNo. voltage range Output
CLG-60-20
20V, 0~3.0A
CLG-60-24
24V, 0~2.5A
±10%
1.8V
87.5%
±10%
2.7V
87.0%
60%~100%
Dimension (LxWxH) (mm)
171x 61.5x 36.8
Output
Tol.
R&N
Effi.
27V, 0~3.55A
±3%
150mV
88.0%
36V, 0~2.65A
±2%
150mV
88.0%
48V, 0~2.00A
±2%
200mV
88.5%
CLG-100-36
CLG-60-15 15V, 0~4.0A ±10%±10% 2.4V 86.0% DC adjustment range rated output voltage (A-Type only)
Current adjustment range Features
Model No. CLG-100-27 CLG-100-48
Cold start, 55A at 230VAC
CLG-150 Series
(option)
current protection 95%~108% constant current limiting, auto-recovery Modelmodels No. Tol. R&N Effi. • Multiple for Output choice: •Over Universal to 305VAC) CLG-60-27AC input 27V, (up 0~2.3A ±10%/ Full range 2.7V 88.0% A-Type: IP65 Arated. Output voltage±2% and constant current level •Over Protections: voltage protection 109%~145% rated output voltage 12V, 0~11.0A 150mV 88% CLG-150-12 CLG-60-36 36V, 0~1.7A ±10% 89.0% can be adjusted through internal potentiometer Short circuit / Over current / Over voltage /3.6V Over temperature 15V, 0~9.50A ±2% 150mV 88% CLG-150-15 A Setup, rise, hold 48V, up time 80ms, 16ms at full load and 230VAC CLG-60-48 0~1.3A 1000ms, ±10%of 4.6V B-Type: IP67 rated and built-in 3 in 1 dimming function • Built-in active PFC, PF>0.9 for 60% load or higher 89.0% 20V, 0~7.50A ±2% 150mV 90% CLG-150-20 A Withstand voltage I/P-O/P: 3.75kVAC, I/P-FG: 2kVAC, O/P-FG:0.5kVAC (1~10VDC, PWM signal, or resistance) • High efficiency up to 93.5% 24V, 0~6.30A ±1% 150mV 90% CLG-150-24 A Blank-Type: IP67 rated. Cable for I/O connection •Working IP67 / IP65 design for indoor or outdoor installations O temperature C (refer to output derating curve) CLG-100 Seriesadjustable -40~+70 BL-Type(option): for HLG-80H "UL8750 listed" • Output current through output cable (option) or internal 12~36V) (for 48V only) (for 30V, 0~5.00A B-Type ±1% only, 150mV 91% CLG-150-30 A UL8750, EN61347-2-13, PSE J61347-1, safety J61347-2-13 approved;contact MEAN WELL for & IP66 approved, potentiometer Modelstandards No. Output Tol. TUV EN61347-1, R&N Effi. 36V, 0~4.20A ±1% 150mV 91% Safety CLG-150-36 A details • Cooling by free12V, air 0~5.00A convection Design refer to UL60950-1, EN60950-1, EN60335-1 CLG-100-12 ±3% 150mV 83.0% 48V, 0~3.20A ±1% 200mV 91% CLG-150-48 A D-Type(option): IP67 rated. Timer dimming function, contact • Suitable for dry, damp, and wet location standards EN55015, EN61000-3-2 class C, EN61000-3-3, EN61547 CLG-100-15 15V, 0~5.00A ±3% lighting 150mV 85.0% MEAN WELL for details •EMC Suitable for LED lighting and street applications C or blank □= A, B,EN61000-4-2,3,4,5,6,8,11, CLG-100-20 0~4.80Alevel ±3% SJTW 18AWGx3C 150mV 88.5% • Optional CQC models available (HLG-100H/120H-A/Blank type) • Meet 4kV surge20V, immunity (IEC61000-4-5) Input UL rated, (30cm) CLG-60-12/24/48, CLG-100-12/24/48 & CLG-150-12A/24A/36A/ • 5 years warranty •Connection Class 2 power unit / Pass LPS (except for HLG-120H) CLG-100-24 24V, 0~4.00A ±3% 150mV 88.5% 48A are our popular models. We will keep sufficient stock for Output A/D/Blank-Type: SVT 18AWGx2C (30cm); B-Type: SVT 18AWGx2C (30cm)+UL2517 18AWGx2C (30cm)
HLG-80H
INPUT
HLG-40H Series Model No.
(for 48V/54V)
Output
Tol.
HLG-100H / HLG-120H
Model No.
(for 12~42V)
R&N
150mV
Output
Tol.
R&N
17 Effi.
Effi.
HLG-60H-36 A
36V, 0~1.70A
A ±1.0%
B 200mV
Blank/D 90.0%
86.5%
HLG-60H-42 A
42V, 0~1.45A
±1.0%
300mV
90.0%
48V, 0~1.30A
±1.0%
300mV
90.5%
54V, 0~1.15A
±1.0%
300mV
90.5%
HLG-40H-12 AO U T P12V, U T 0~3.33A HLG-40H-15 A 15V, 0~2.67A
±2.0%
150mV
86.5%
HLG-60H-48 A
HLG-40H-20 A
±1.0%
150mV
88.0%
HLG-60H-54 A
20V, 0~2.00A
±2.5%
prompt delivery of high quantity orders.
= A, B, D or Blank
150~320W High Efficiency with PFC Features • Universal AC input (up to 305VAC) / Full range • Protections: Short circuit / Over current / Over voltage / Over temp. • Built-in active PFC, PF>0.9 for 60% of load or higher • High efficiency up to 95% • IP67 / IP65 design for indoor or outdoor installations (except for C-Type) • Output current adjustable • Cooling by free air convection • Suitable for LED lighting and street lighting applications • Meet 4kV surge immunity level (IEC61000-4-5)
• Multiple models for choice: A-Type: IP65 rated. Output voltage and constant current level can be adjusted through internal potentiometer B-Type: IP67 rated and built-in 3 in 1 dimming function (1~10VDC, PWM signal, or resistance) C-Type: Terminal block for I/O connection (HLG-240H/320H) Blank-Type: IP67 rated. Cable for I/O connection D-Type(option): IP67 rated. Timer dimming function, contact MEAN WELL for details • Optional CQC models available (HLG-150H/185H/240H-A/Blank-Type) • 5 years warranty
HLG-150H/185H
HL G-2 4 0 H
HL G-3 2 0 H
INPUT
A
B
C
Blank/D
OUTPUT (HLG-240H/320H)
AC input voltage range 90~305VAC; 127~431VDC 70~(max.) 200 WCold Co nst Cu rrent w i t75A h PF C start, 65Aant at 230VAC AC inrush current Cold start, at 230VAC Cold start, 70A at 230VAC ±10% rated output voltage ±6% rated output voltage DC adjustment range Current adjustment range HLG-150H: 60%~100% ; HLG-185H/240H/320H: 50%~100% Features Over current protection 95%~108% constant current limiting, auto-recovery voltage protection 110%~140% rated output voltage •Over Constant current output with high output voltage>60VDC • Suitable for LED lighting and street lighting applications 80ms, rise,AC hold up time 15ms at full loadfor and 230VAC •Setup, Universal input (up to 2500ms, 305VAC)/ Full16ms range 2500ms, 80ms, • Multiple models choice: Withstand voltage I/P-O/P: 3.75kVAC, I/P-FG: 2kVAC, O/P-FG: 0.5kVAC • Built-in active PFC function A-Type: IP65 rated. Constant current level can be adjusted Working temperature -40~+70 O C (refer to output derating curve) • High efficiency up to 94% through internal potentiometer UL8750, TUV EN61347-1, EN61347-2-13, PSE J61347-1, J61347-2-13 (except for C-Type) approved; standards •Safety Protections: Short circuit UL1012, / Over voltage / Over temperature B-Type: IP67 rated and UL60950-1, TUV EN60950-1 approved for HLG-240H onlybuilt-in 3 in 1 dimming function •EMC Cooling by free air convection (1~10VDC, PWM signal, or resistance) standards EN55015, EN55022 class B, EN61000-3-2 class C, EN61000-3-3, EN61000-4-2,3,4,5,6,8,11, EN61547 • Output current adjustableUL through cable or internal D-Type (option): IP67 rated. Timer dimmingonly) function, Input rated,output SJTW 18AWGx3C (30cm); Terminal block for C-Type (HLG-240H/320H Connection A & Blank-Type: SJTW 14AWGx2C (30cm) ; B-Type: SJTW 14AWGx2C (30cm)+SJTW 18AWGx2C (30cm); potentiometer contact MEAN WELL for details Output C-Type: Terminal block (HLG-240H/320H) • IP67 / IP65 design for indoor or outdoor installations • 5 years warranty A/B/D/Blank-Type: A/B/D/Blank-Type: 244.2x 68x 38.8 •Dimension Suitable for dry, damp, and wet location (LxWxH)(mm) 252x 90x 43.8 228x 68x 38.8 C-Type: 251x 68x 38.8
HLG-60H-C
HLG-150H Series Model No.
INPUT
Output
Tol.
HLG-80H-C
NE R&N W
HLG-120H-C
HLG-240H Series Effi.
HLG-150H-12 A 12V, 0~12.5A ±2.5% 150mV 91.5% HLG-150H-15 A 15V, 0~10.0A ±2.0% 150mV 92.0% OUTPUT HLG-150H-20 A 20V, 0~7.50A ±1.0% 150mV 93.0% HLG-150H-24 A 24V, 0~6.30A ±1.0% 150mV 93.0% HLG-150H-30 A 30V, 0~5.00A ±1.0% 200mV 93.5% HLG-150H-36 A range 36V, 0~4.20A ±1.0% 127VDC~431VDC 200mV 93.5% AC input voltage 90~305VAC; HLG-150H-42 A 42V, 0~3.60A ±1.0% 200mV 94.0% 96~150W Wide Input Range with AC inrush current Cold start, 60A at 230VAC 94.0% HLG-150H-48 A (Typ.) 48V, 0~3.20A ±1.0% 200mV HLG-150H-54 A 54V, ±1.0% 200mV 94.0% Current adjustment range0~2.80A 60%~100%
NE Model W No.
HLG-185H-C
De U ve nd lop er Tol. me nt
Output
HLG-240H-12 A 12V, 0~16.0A ±2.5% HLG-240H-15 A 15V, 0~15.0A ±2.0% HLG-240H-20 A 20V, 0~12.0A ±1.0% HLG-240H-24 A 24V, 0~10.0A ±1.0% HLG-240H-30 A 30V, 0~8.00A ±1.0% HLG-240H-36 A 36V, 0~6.70A ±1.0% PFCHLG-240H-42 A 42V, 0~5.72A ±1.0% Cold at 230VAC HLG-240H-48 A start, 48V,70A 0~5.00A ±1.0% HLG-240H-54 A 54V, 0~4.45A ±1.0% 50%~100%
R&N
150mV 150mV 150mV 150mV 200mV 250mV 250mV 250mV 350mV
De U ve nd lop er Effi. me nt
90.0% 90.0% 92.0% 93.0% 93.0% 93.0% 93.0% 93.5% 94.0%
Features = A , B , D or Blank = A, B , C , D or Blank Short circuit protection Hiccup mode, auto-recovery • Wide input range: 180~480VAC for HVG(C)-100 • Class 2 power unit / Pass LPS for HVG-100 O HLG-320H HLG-185H 180~528VAC for HVG(C)-150 • Suitable forSeries dry,on damp, and wet location C(RTH2), shut down o/p voltage, re-power to recover Over temp. Series protection 85 O C±10 Model No.LED lighting Output Tol. R&N Effi. Model No.Short circuit Output Tol. / OverR&N Effi. / • Protections: / Over voltage temperature • Suitable for and street lighting applications Withstand voltage I/P-O/P:3.75kVAC, I/P-FG:2kVAC, Over (HVG-100/150) • Multiple models choice: HLG-320H-12 A for12V, 0~22.0A ±3.0% 150mV 91.0% HLG-185H-12 A current 12V, 0~13.0A ±2.5% 150mV 91.5% O/P-FG:0.5kVAC • Built-in active A PFC 15V, 0~11.5A ±2.0% A-Type: IP65 rated. Output voltage and constant current92.5% level HLG-320H-15 A 15V, 0~19.0A ±2.0% 150mV HLG-185H-15 92.0% to output derating curve) Working temperature -40~+70 O C (refer150mV • High efficiency up to 91.5% can be adjusted through internal potentiometer HLG-320H-20 A 20V, 0~15.0A ±1.5% 150mV 93.5% HLG-185H-20 A 20V, 0~9.30A ±1.0% 150mV 93.0% •Safety IP67 / standards IP65 design B-Type: IP67 (HLG-120H-C/185H-C rated and built-in 3 in pending) 1 dimming function UL8750, TUV EN61347-1, EN61347-2-13 approved HLG-320H-24 A 24V, ±1.0% 150mV 94.0% HLG-185H-24 24V, 0~7.80A ±1.0% 150mV 93.5% • Cooling by freeA air convection (0~10VDC, PWM0~13.34A signal, or resistance) HLG-320H-30 A 30V, 0~10.7A ±1.0% 200mV HLG-185H-30 A 30V, 0~6.20A ±1.0% 200mV 93.5% EMC standards EN55015, EN61000-3-2 class C, EN61000-3-3, EN61000-4-2,3,4,5,6,8,11, EN61547 • C.V. +C.C. mode design (HVG-100/150) D-Type (option): IP67 rated. Timer dimming function, 94.0% • Constant currentAdesign (HVGC-100/150) MEAN WELL for details HLG-320H-36 A contact 36V, 0~8.90A ±1.0% 250mV 94.5% HLG-185H-36 36V, 0~5.20A ±1.0% 200mV 93.5% Input UL rated, SJTW 16AWGx3C(30cm) • Output currentAadjustable through output or internal • 5HLG-320H-42 years warranty A 42V, 0~7.65A ±1.0% 250mV 95.0% HLG-185H-42 42V, 0~4.40A ±1.0% cable 200mV 94.0% potentiometer HLG-320H-48 A 48V, 0~6.70A ±1.0% 250mV 95.0% HLG-185H-48 A 48V, 0~3.90A ±1.0% 200mV 94.0% A&D-Type: SJTW 16AWGx2C(30cm) A&D-Type: STW 16AWGx2C(30cm) Connection HVG/HVGC-150 B-Type: ±1.0% SJTW HVG/HVGC-100 16AWGx2C(30cm)+ B-Type: STW0~5.95A 16AWGx2C(30cm)+ HLG-320H-54 A 54V, ±1.0% 350mV 95.0% HLG-185H-54 A Output 54V, 0~3.45A 200mV 94.0% SJTW 16AWGx2C(30cm) = A , B , C , D or SJTW16AWGx2C(30cm) Blank = A , B , D or Blank 20
NE W
INPUT HLG-185H-12A/24A/48A & HLG-240H-12A/24A/48A are our popular models. We will keep sufficient stock for prompt delivery of high quantity orders.
Dimension (LxWxH)(mm)
171x 61.5x 36.8
195.6x 61.5x 38.8
220x 68x 38.8
228x 68x 38.8
OUTPUT
HLG-80H-C Series
HLG-60H-C Series Mod e l N o .
O ut p ut
I o Tol .
R& N
E ffi.
Model No.
Ou tpu t
Io Tol.
R&N
E f f i.
AC input voltage range 180~480VAC(single phase); 254~679VDC 180~528VAC (single phase); 254~747VDC HLG-60H-C350 A 100~200V,Cold 350mA HLG-80H-C350Cold A 167~257V, 350mA 1.0V 91.0% 1.0V 91.5% ±5% AC inrush current (max.) start,±5% 25A at 440VAC start, 35A at 480VAC
70W &150W Single Output with PFC / Surge Protection Device
7 0 W R e c t a n gu l a r Met a l C a se
1 5 0 W U-Bra c ket Single O ut put w ith PFC
•Universal AC input (up to 305VAC) • Protections: Short circuit / Over current / Over voltage / Over temperature • Built-in active PFC • Output current adjustable through internal potentiometer • IP65 design • Cooling by free air convection • Suitable for LED lighting and moving sign applications • 3 years warranty
127.2x 90x 38.8 mm
•Universal AC input (up to 295VAC) •Built-in active PFC function •High efficiency up to 93% • Protections: Short circuit / Overload / Over voltage / Over temperature •Constant voltage design •Cooling by free air convection •U-bracket low profile: 33mm •3 years warranty
215x 67.4x 33 mm
AC input voltage range AC inrush current (max.)
90~295VAC; 127~417VDC Cold start, 65A at 230VAC
Current adjustment range 60%~100%
Overload protection
Over current protection
95%~108% constant current limiting
130%~185% hiccup mode, auto-recovery
Over voltage protection
112%~140% rated output voltage
Over voltage protection
110%~135% rated output voltage
Setup, rise, hold up time
Withstand voltage
I/P-O/P: 3.75kVAC, I/P-FG: 1.88kVAC, O/P-FG: 0.5kVAC
2000ms, 100ms, 16ms at full load and 230VAC
Working temperature
-40~+70OC (refer to output derating curve)
Withstand voltage
I/P-O/P: 3.75kVAC, I/P-FG: 1.88kVAC, O/P-FG: 0.5kVAC
Safety standards
Design refer to EN61347-1, EN61347-2-13
Working temperature
EMC standards
EN55015, EN61000-3-2 class C, EN61000-3-3, EN61547, EN61000-4-2,3,4,5,6,8,11
O -30~+70 C (refer to output derating curve)
Safety standards
Design refer to UL8750, EN61347-1, EN61347-2-13
Input
H05RN-F 1.5mm2x2C (30cm)
EMC standards
Output
H05RN-F 1.0mm2x3C (30cm)
EN55015, EN61000-3-2 class C, EN61000-3-3, EN61547, EN61000-4-2,3,4,5,6,8,11
AC input voltage range
Connection
90~305VAC; 127~431VDC
Model No.
Output
Tol.
R&N
Effi.
Model No.
Output
Tol.
R&N
Effi.
HSG-70-12
12V, 0~5.0A
±2.5%
150mV
88%
ULP-150-12
12V, 0~12.5A
±2%
100mV
91.5%
HSG-70-18
18V, 0~4.0A
±2.0%
200mV
89%
ULP-150-15
15V, 0~10.0A
±2%
150mV
91.5%
HSG-70-24
24V, 0~3.0A
±1.0%
200mV
89%
ULP-150-24
24V, 0~6.30A
±2%
150mV
93.0%
ULP-150-36
36V, 0~4.20A
±2%
250mV
93.0%
ULP-150-48
48V, 0~3.20A
±2%
250mV
93.0%
HSG-70-36 DC -DC HSG-70-48
0~2.0A ±1.0% 90%i ve r C36V, onst ant Cu rrent200mV LED Dr 48V, 0~1.5A
±1.0%
Features
200mV
90%
2 0 k A S urge Pro t ec t io n D ev ic e
•Constant current LED driver •Compact size •Wide input and output voltage range •Operating temperature range: -40~+85 o C Features •High efficiency up to 97% •Cooling by free air convection •UL1449 3rd Edition, •IP67 design •Comply with EN55015 and FCC part 15 without additional •Fully enclosed plastic case (UL 94V-0) Type 2 component assemblies •Suitable for surge protection of input filter and capacitors •Low cost, high reliability • Line to Ground & Line to Line protected LED drivers •Built-in PWM dimming and remote ON/OFF control •3 years warranty • Parallel (3 wires) connection style •Protections: Short circuit / Over temperature 90x 70x 50 mm •LED status indicators
LDD - H / HW / HS
L D D -L / LW / L S
Model No.
SPD-20-240P
Operating voltage
240VAC, 50/60Hz
MCOV (Max. Continuous Operating Voltage)
300VAC
VPR (Voltage Protection Rating)
≤1200 (L-FG, N-FG, L-N)
IN (Nominal Discharge Current)
5kA
NEW
(SPD-20-240P)
SPD-20-277P 277VAC, 50/60Hz
NEW
320VAC
Max. Surge Current (8/20μs)
20kA ±3% at 24VDC input; SCCR (Short Circuit Current Rating) 5kA Output Current Accuracy ±4% at 48VDC input for LDD-H/HW; ±5% at 24VDC input Response time <25ns ±5% at 48VDC input for LDD-HS O Operating temperature -40~+70 C Leave open if not used rd Safety standard UL1449 3 Edition, TUV EN61643-11 approved UL1449 3rd Edition approved PWM Power ON with dimming: Power ON with dimming: Remote L (Black) Dimming ON/OFF DIM~-Vin>2.5~6VDC or open circuit DIM~-Vin>3.5~8VDC or open circuit & ON/OFF Connection NPower (White)OFF: DIM~-Vin FEP 10AWG (15cm) <0.8VDC or short Power OFF: DIM~-Vin <0.5VDC or short Control FG (Green) PWM Frequency 100~1KHz Short circuit Regulated at rated output current, can be continued, auto-recovery o
23
96~240W Circular Shape for High Bay Lighting Description HBG series are high performance LED power supplies specially designed for the high/low bay lighting and spot lighting applications. Featuring with circular shape, these new series are easy to be assembled and perfectly fit in with the mechanical structure of high/ low bay lighting fixtures. Fully potted by glue, their aluminum enclosure can be tightly assembled to the heat sink of lighting fixtures and provide excellent heat dissipation ability, which solve the mechanism limits of old style bay lighting systems using slim shape LED power supplies. As long as the temperature on the top of the enclosure can be controlled under 70 o C, the power supply service life could be guaranteed up to 40,000 hours. For more detail information, please visit our website: www.meanwell.com/product/HBG/HBG.html
H B G- 10 0
HBG-1 6 0
HBG-2 4 0
NE W
NE W
De U ve nd lop er me nt
DxH: 151.68x 66.5mm
DxH: 130x 66.5mm
DxH: 191.5x 69mm
Features •Universal AC input (90~305VAC) •Built-in active PFC function •High efficiency up to 93.5% •Protections: Short circuit / Over current / Over voltage / Over temperature •Output current adjustable through internal potentiometer •IP67 / IP65 design for indoor or outdoor installations •Suitable for dry, damp, and wet location
HBG-100 Series
UL/CUL/TUV/CB/CE pending
Model No.
Output
HBG-100-24 A 24V, HBG-100-36 A 36V, HBG-100-48 A 48V, HBG-100-60 A 60V, = A, B, E or Blank
0~4.0A 0~2.7A 0~2.0A 0~1.6A
HBG-160 Series
Tol.
Effi.
±1% ±1% ±1% ±1%
90.5% 91.0% 91.0% 91.5%
Model No.
Model No.
Output
Tol.
Effi.
24V, 0~6.5A 36V, 0~4.4A
±1% ±1%
92.0% 92.0%
HBG-240 Series
► ►Construction of High Bay Light HBG Series
+
Heat Sink
+
Light Source
+
Output
HBG-160-48 A 48V, 0~3.3A HBG-160-60 A 60V, 0~2.6A = A, B, E or Blank
UL/CUL/TUV/CB/CE pending
HBG-160-24 A HBG-160-36 A
Ring
•Multiple models for choice: A-Type: IP65 rated. Constant current level can be adjusted through internal potentiometer B-Type: IP67 rated and built-in 3 in 1 dimming function (1~10VDC, PWM signal, or resistance) Blank-Type: IP67 rated. Cable for I/O connection E-Type(option): IP67 rated. Can be mounted on metal frame, contact MEAN WELL for details •5 years warranty Tol.
Effi.
±1% ±1%
93.0% 93.5%
UL/CUL/TUV/CB/CE pending
Model No.
HBG-240-24 A HBG-240-36 A HBG-240-48 A HBG-240-60 A = A, B or Blank
Output
Tol.
Effi.
24V, 0~10A 36V, 0~6.7A 48V, 0~5.0A 60V, 0~4.0A
±1% ±1% ±1% ±1%
92.5% 92.5% 93.0% 93.5%
lampshade
High Bay Light
+
► ►Installations Spot Light
Stage Light
High Bay Light
Chain Type
Hanger Type 25
LDB60 60W Constant Current/ Constant Voltage 218 x 40 x 28mm
-30 to 50
-30 to 50
-30 to 50
-30 to 50
-30 to 50
-30 to 50
-30 to 50
LDV75 75W Constant Voltage 218 x 40 x 28mm
LDB75 75W Constant Voltage/ Constant Current 218 x 40 x 28mm
LDV100 100W Constant Voltage 218 x 40 x 28mm
-30 to 50
-30 to 50
LDB100 100W Constant Voltage/ Constant Current 218 x 40 x 28mm
-30 to 50
-30 to 50
-30 to 50
-30 to 50
-30 to 50
-30 to 50
-30 to 50
-30 to 50
-30 to 50
LDD100 100W Dimming 218 x 40 x 28mm
Refer to page 16 for additional information on Dimming Control
LDB150 150W Constant Voltage/ Constant Current 218 x 63 x 40mm
-30 to 50
-30 to 50
-30 to 50
-30 to 50
LDB200 200W Constant Voltage/ Constant Current 218 x 63 x 40mm
-30 to 50
-30 to 50
-30 to 50
-30 to 50
Refer to page 16 for additional information on Dimming Control
LXD35 35W Dimming
172 x 42.5 x 34.5mm 87K hour lifetime Temp range -35 to 55 Up to 88% efficient
LXD50 50W Dimming
172 x 42.5 x 34.5mm 66K hour lifetime Temp range -35 to 55 Up to 89% efficient
LXD75 75W Dimming
150 x 67.5 x 37mm 65K hour lifetime Temp range -35 to 70 Up to 92% efficient
Refer to page 16 for additional information on Dimming Control
LXD85 85W Dimming
150 x 67.5 x 37mm 63K hour lifetime Temp range -35 to 60 Up to 91% efficient
LXD96 96W Dimming
174 x 67.5 x 37mm 50K hour lifetime Temp range -35 to 70 Up to 92% efficient
LXD100 100W Dimming
194 x 67.5 x 37mm 100K hour lifetime Temp range -35 to 65 Up to 91% efficient
Refer to page 16 for additional information on Dimming Control
LXD120 120W Dimming
194 x 67.5 x 37mm 80K hour lifetime Temp range -35 to 65 Up to 91% efficient
LXD150 150W Dimming
235 x 79.5 x 46mm 70K hour lifetime Temp range -35 to 70 Up to 93.5% efficient
LXD200 200W Dimming
235 x 79.5 x 46mm 70K hour lifetime Temp range -35 to 70 Up to 93.5% efficient
LXC30 30W Constant Current
162 x 42.5 x 34.5mm 177K hour lifetime Temp range -35 to 60 Up to 87% efficient
LXC35 35W Constant Current
172 x 42.5 x 34.5mm 87K hour lifetime Temp range -35 to 55 Up to 88% efficient
LXC50 50W Constant Current
162 x 42.5x 34.5mm 107K hour lifetime Temp range -35 to 60 Up to 88% efficient
LXC30 does not meet EN61000-3-2 Class C limit
LXC50 does not meet EN61000-3-2 Class C limit
LXC50 SW 50W Constant Current
172 x 42.5 x 34.5mm 66K hour lifetime Temp range -35 to 55 Up to 89% efficient
LXC60 60W Constant Current
150 x 67.5 x 37mm 80K hour lifetime Temp range -35 to 70 Up to 91% efficient
LXC75 75W Constant Current
150 x 67.5 x 37mm 65K hour lifetime Temp range -35 to 70 Up to 92% efficient
LXC85 85W Constant Current
150 x 67.5 x 37mm 63K hour lifetime Temp range -35 to 60 Up to 91% efficient
LXC96 96W Constant Current
174 x 67.5 x 37mm 50K hour lifetime Temp range -35 to 70 Up to 92% efficient
LXC100 100W Constant Current
194 x 67.5 x 37mm 125K hour lifetime Temp range -35 to 70 Up to 91% efficient
LXC120 120W Constant Current
194 x 67.5 x 37mm 122K hour lifetime Temp range -35 to 70 Up to 91% efficient
LXC150 150W Constant Current
238 x 79.5 x 46mm 100K hour lifetime Temp range -35 to 70 Up to 92% efficient
LXC200 200W Constant Current
238 x 79.5 x 46mm 60K hour lifetime Temp range -35 to 70 Up to 92% efficient
LXV35 35W Constant Voltage
172 x 42.5 x 34.5mm 87K hour lifetime Temp range -35 to 55 Up to 86% efficient
LXV50 50W Constant Voltage
172 x 42.5 x 34.5mm 66K hour lifetime Temp range -35 to 55 Up to 87% efficient
LXV75 75W Constant Voltage
184 x 67.5 x 37mm 83K hour lifetime Temp range -35 to 70 Up to 93% efficient
90-264VAC models available. SW suffix for 90-305VAC input. S suffix for 90-264VAC input.
LXV76 76W Constant Voltage
150 x 67.5 x 37mm 65K hour lifetime Temp range -35 to 70 Up to 91% efficient
LXV96 96W Constant Voltage
174 x 67.5 x 37mm 50K hour lifetime Temp range -35 to 70 Up to 90% efficient
LXV100 100W Constant Voltage
184 x 67.5 x 37mm 96K hour lifetime Temp range -35 to 70 Up to 93% efficient
90-264VAC models available. SW suffix for 90-305VAC input. S suffix for 90-264VAC input.
LXV150 150W Constant Voltage
199 x 67.5 x 40mm 74K hour lifetime Temp range -35 to 70 Up to 94% efficient
90-264VAC models available. SW suffix for 90-305VAC input. S suffix for 90-264VAC input.
LXV200 200W Constant Voltage
199 x 67.5 x 40mm 55K hour lifetime Temp range -35 to 70 Up to 93% efficient
90-264VAC models available. SW suffix for 90-305VAC input. S suffix for 90-264VAC input.
LXV250 250W Constant Voltage
224 x 88 x 33mm 186K hour lifetime Temp range -35 to 70 Up to 94% efficient
LXV300 300W Constant Voltage
223 x 98 x 44.5mm 131K hour lifetime Temp range -35 to 70 Up to 94% efficient
LXC75-H 75W Constant Current
188 x 88 x 39mm 50K hour lifetime Temp range -35 to 70 Up to 89% efficient
LXC150-H 150W Constant Current
188 x 93.9 x 44.5mm 50K hour lifetime Temp range -35 to 70 Up to 92% efficient
LXV300-H 300W Constant Voltage
224 x 93.6 x 44.5mm 50K hour lifetime Temp range -35 to 70 Up to 89% efficient
Zusatzinformationen
Kabel, Sensoren & Zubehรถr
connector system
s t e cker s ys t eM Artikelbez. discription
Verbindungskabel 2 Adrig männchen/weibchen Plug to Outlet
Artikelbez. discription
Verbindungskabel 2 Adrig männchen Outlet to Pigtail
Artikelbez. discription
Verbindungskabel 2 Adrig weibchen Plug to Pigtail
e a sy con n ect
Art.-Nr. part.-no.
Länge length
Farbe color
400100
0,5m
black
400101
1m
black
400102
1,5m
black
400103
2m
black
400104
0,5m
white
400105
1m
white
400106
1,5m
white
400107
2m
white
Art.-Nr. part.-no.
Länge length
Farbe color
400108
0,5m
black
400109
1m
black
400110
1,5m
black
400111
2m
black
400112
0,5m
white
400113
1m
white
400114
1,5m
white
400115
2m
white
Art.-Nr. part.-no.
Länge length
Farbe color
400116
0,5m
black
400117
1m
black
400118
1,5m
black
400119
2m
black
400120
0,5m
white
400121
1m
white
400122
1,5m
white
400123
2m
white
Für Montage- und Sicherheitshinweise siehe www.ledxon.de/downloads / For assembly- and safety information see www.ledxon.com/downloads
connector system
s t e c k e rs ys teM Artikelbez. discription
Verbindungskabel 4 Adrig männchen/weibchen Plug to Outlet
Artikelbez. discription
Verbindungskabel 4 Adrig männchen Outlet to Pigtail
Artikelbez. discription
Verbindungskabel 4 Adrig weibchen Plug to Pigtail
e a sy con n ect
Art.-Nr. part.-no.
Länge length
Farbe color
400124
0,5m
black
400125
1m
black
400126
1,5m
black
400127
2m
black
400128
0,5m
white
400129
1m
white
400130
1,5m
white
400131
2m
white
Art.-Nr. part.-no.
Länge length
Farbe color
400132
0,5m
black
400133
1m
black
400134
1,5m
black
400135
2m
black
400136
0,5m
white
400137
1m
white
400138
1,5m
white
400139
2m
white
Art.-Nr. part.-no.
Länge length
Farbe color
400140
0,5m
black
400141
1m
black
400142
1,5m
black
400143
2m
black
400144
0,5m
white
400145
1m
white
400146
1,5m
white
400147
2m
white
Für Montage- und Sicherheitshinweise siehe www.ledxon.de/downloads / For assembly- and safety information see www.ledxon.com/downloads
connector system
s t e cker s ys t eM
easy conne c t
Artikelbez. discription
Art.-Nr. part.-no.
Länge length
Farbe color
6- fach Verteilerbox 6 Way Distributor Pigtail
400148
1m
black
400149
1m
white
Artikelbez. discription
Art.-Nr. part.-no.
Länge length
Farbe color
6- fach Verteilerbox mit Schaltfunktion 6 Way Distributor Pigtail (switchable)
400150
1m
black
400151
1m
white
Artikelbez. discription
Art.-Nr. part.-no.
Länge length
Farbe color
IP65 Schutztülle IP Boot
400152
-
transparent
Artikelbez. discription
Art.-Nr. part.-no.
Länge length
Farbe color
Parallel Splitter Splitter Parallel
400153
-
white
Für Montage- und Sicherheitshinweise siehe www.ledxon.de/downloads / For assembly- and safety information see www.ledxon.com/downloads
connector system
s t e ck e rs ys t eM
e a sy con n ect
Artikelbez. discription
Art.-Nr. part.-no.
L채nge length
Farbe color
Wandbuchse Chassis Mount Frame
400154
-
white
Artikelbez. discription
Art.-Nr. part.-no.
L채nge length
Farbe color
Bus Stecker mit Halterung Bus Bar With Fixing Hook
400155
-
white
Artikelbez. discription
Art.-Nr. part.-no.
L채nge length
Farbe color
2 poliger Quetschverbinder Splice Connector
400156
-
white
F체r Montage- und Sicherheitshinweise siehe www.ledxon.de/downloads / For assembly- and safety information see www.ledxon.com/downloads
Zubehör 10-fach Verteilerbox, parallel Eingangsspannung
6 - 24 V DC
Stromstärke
max. 9 A, 3 A pro Ausgang
Maße (L x B x H)
50 x 30 x 14 mm
Gewicht
27 g
Steckersystem
XHP-Stecksystem
Gehäuse
Kunststoff
Artikelnummer
0540GU0009
9-fach Verteilerbox, parallel Eingangsspannung
6 - 24 V DC
Stromstärke
max. 8 A, 1,5 A pro Ausgang
Maße (L x B x H)
100 x 55 x 8,8 mm
Gewicht
30 g
Steckersystem
LED-Stecker
Gehäuse
Kunststoff
Artikelnummer
0540GU0007 (schwarz) 0540GU0005 (weiß)
6-fach Verteilerbox, parallel Eingangsspannung
6 - 24 V DC
Stromstärke
max. 8 A, 1,5 A pro Ausgang
Maße (L x B x H)
55 x 38 x 8,8 mm
Gewicht
24 g
Steckersystem
LED-Stecker
Gehäuse
Kunststoff
Artikelnummer
0540GU0003 (schwarz) 0540GU0001 (weiß)
71
Zubehör 10-fach Verteilerbox, seriell Eingangsspannung
6 - 24 V DC
Stromstärke
max. 9 A, 3 A pro Ausgang
Maße (L x B x H)
50 x 30 x 14 mm
Gewicht
25 g
Steckersystem
XHP-Stecker
Gehäuse
Kunststoff
Artikelnummer
0540GU0010
9-fach Verteilerbox, seriell Eingangsspannung
6 - 24 V DC
Stromstärke
max. 8 A, 1,5 A pro Ausgang
Maße (L x B x H)
100 x 55 x 8,8 mm
Gewicht
34,5 g
Steckersystem
LED-Stecker
Gehäuse
Kunststoff
Artikelnummer
0540GU0008 (schwarz) 0540GU0006 (weiß)
6-fach Verteilerbox, seriell Eingangsspannung
6 - 24 V DC
Stromstärke
max. 8 A, 1,5 A pro Ausgang
Maße (L x B x H)
55 x 38 x 8,8 mm
Gewicht
29,5 g
Steckersystem
LED-Stecker
Gehäuse
Kunststoff
Artikelnummer
0540GU0004 (schwarz) 0540GU0002 (weiß)
72
Zubehör IP67-Kabelset für flexible LED-Streifen Kabelquerschnitt
AWG20
max. Stromstärke
3A
Länge
150 mm
Farbe
weiß
Artikelnummer
0570110002
IP67-Kabelset für flexible RGB LED-Streifen Kabelquerschnitt
AWG20
max. Stromstärke
3A
Länge
150 mm
Farbe
RGB
Artikelnummer
0570110001
73
Zubehör für flexible LED-Streifen Steckverbinder - 2-polig - 8 mm Material
Kunststoff
Maße (L x B x H)
15,4 x 12,2 x 4,6 mm
max. Stromstärke
6A
Farbe
weiß
Beschreibung
passend für LED-Streifen, 8 mm, bis 60 LED/m
Artikelnummer
0020380001
Steckverbinder - 2-polig - 10 mm Material
Kunststoff
Maße (L x B x H)
15,4 x 12,2 x 4,6 mm
max. Stromstärke
6A
Farbe
weiß
Beschreibung
passend für LED-Streifen, 10 mm, bis 60 LED/m
Artikelnummer
0020380003
Steckverbinder - 4-polig - 10 mm Material
Kunststoff
Maße (L x B x H)
15,4 x 12,2 x 4,6 mm
max. Stromstärke
6A
Farbe
weiß
Beschreibung Artikelnummer
74
passend für LED-Streifen, 10 mm, bis 60 LED/m 0020380004
Zubehör Anschlusskabel - 2-polig - 8 mm Material
Kunststoff
Maße (L x B x H)
15,4 x 12,2 x 4,6 mm
max. Stromstärke
6A
Kabellänge
160 mm
Farbe
rot-schwarz
Beschreibung
passend für LED-Streifen, 8 mm, 60 LED/m
Artikelnummer
0020380002
Verbinderkabel - 2-polig - 8 mm Material
Kunststoff
Maße (L x B x H)
15,4 x 12,2 x 4,6 mm
max. Stromstärke
6A
Kabellänge
150 mm
Farbe
weiß
Beschreibung
passend für LED-Streifen, 8 mm, 60 LED/m
Artikelnummer
0020380005
Verbinderkabel - 4-polig - 10 mm Material
Kunststoff
Maße (L x B x H)
15,4 x 12,2 x 4,6 mm
max. Stromstärke
6A
Kabellänge
150 mm
Farbe
RGB
Beschreibung
passend für LED-Streifen, 10 mm, 60 LED/m
Artikelnummer
0020380006
Befestigung für LED-Streifen Material
Kunststoff
Menge
10 Stück je Set
Artikelnummer
0020120067 (für 8 mm LED-Streifen) 0020120068 (für 10 mm LED-Streifen) 0020120070 (für 12 mm LED-Streifen)
75
LED-Sensoren Schalter mit Berührungssensor - 230 V Betriebsspannung
220 - 240 V AC, 50 Hz
Stromstärke
2,5 A
Leistungsaufnahme
550 W
Anschlüsse
Schraubklemme mit Zugentlastung
Gehäuse
Kunststoff
Maße (L x B x H)
95 x 55 x 18 mm
Beschreibung
inkl. 3 Sensoren
Artikelnummer
0670290001
Schalter mit Berührungssensor - 12 V Betriebsspannung
12 V DC
Stromstärke
2,5 A
Leistungsaufnahme
30 W
Anschlüsse
Schraubklemme mit Zugentlastung
Gehäuse
Kunststoff
Maße (L x B x H)
95 x 55 x 18 mm
Beschreibung
inkl. 3 Sensoren
Artikelnummer
0670290002
Optischer Näherungsschalter Betriebsspannung
12 V DC
Stromstärke
1,25 A
Leistungsaufnahme
15 W @ 12 V DC / 30 W @ 24 V DC
Gehäuse
Kunststoff
Maße (L x B x H)
63 x 10,8 x 11,8 mm
Beschreibung
Modus 1: monostabil Modus 2: bistabil umschaltbar
Artikelnummer
0650SE0001
58
LED-Sensoren Berührungssensor - 1,5 A - Schalter Betriebsspannung
24 V DC
Stromstärke
1,5 A
Leistungsaufnahme
36 W
Anschlüsse
offene Kabelenden
Gehäuse
Aluminium
Maße (L x B x H)
45 x 31 x 12 mm
Funktion
Ein/Aus
Artikelnummer
0640270001
Berührungssensor - 1,5 A - Dimmer Betriebsspannung
24 V DC
Stromstärke
1,5 A
Leistungsaufnahme
36 W
Anschlüsse
offene Kabelenden
Gehäuse
Aluminium
Maße (L x B x H)
45 x 31 x 12 mm
Funktion
Stufenlos dimmen (3-96%), Ein/Aus
Artikelnummer
0640270002
Berührungssensor - 10 A - Schalter Betriebsspannung
24 V DC
Stromstärke
10 A
Leistungsaufnahme
240 W
Anschlüsse
offene Kabelenden
Gehäuse
Kunststoff
Maße (L x B x H)
86 x 51 x 25 mm
Funktion
Ein/Aus
Artikelnummer
0640270005 (24 V DC)
Berührungssensor - 10 A - Dimmer Betriebsspannung
12 V / 24 V DC
Stromstärke
10 A
Leistungsaufnahme
120 W @ 12 V DC / 240 W @ 24 V DC
Anschlüsse
offene Kabelenden
Gehäuse
Kunststoff
Maße (L x B x H)
86 x 51 x 25 mm
Funktion
Stufenlos dimmen (3-96%), Ein/Aus
Artikelnummer
0640270007 (12 V DC) 0640270006 (24 V DC)
59
Leeren Teich 13 33154 Salzkotten Tel. +49 5258 / 93 51 343 Fax +49 5258 / 93 51 682 www.creative-led.com www.will-licht.de