Pass4Sure JN0-740 Exam Questions

Exam Code: JN0­740 Vendor: Juniper Exam Name: LINUX FOUNDATION CERTIFIED SYSTEM ADMINISTRATOR (LFCS) Cert Name: Juniper ACX/

Get 30% Discount on JN0­740 Economy Pack Economy Pack Includes: 1. JN0­740 Economy Pack Comes with 30% Discount 2. JN0­740 Practice Test Software And PDF 3. JN0­740 Verified Answers And JN0­740 Free Updates 4. Instantly Available to Start JN0­740 Exam Preparation 5. JN0­740 Multiple Learning Modes 6. 24/7 Support on Email and Live Chat Only $111 $99

JN0­740 PDF (Questions And Answers)

Format: JN0­740 PDF Available for All Devices JN0­740 Verified Questions 100% passing guarantee

Only $79 $69

Juniper Certification exams and How to pass?

Certification exams are usually something made known to a candidate who has assorted their choice of a career as well as precisely which certification exam is needed for it. Keeping this in mind, exam preparatory material will be needed to help you pass the Juniper JN0­740 exam.

Juniper JN0­740 exam product We offer exam products that can greatly help you to pass a certification exam; they offer two major features­ the • First being a PDF that has all of the questions and answers to the Juniper JN0­740 exam • Second is practice software that you can try and test your skills on!

There are many sites that provide preparation material for Juniper Juniper ACX/ JN0­740 exam.

Keep your eyes open and make a gentle decision while purchasing Juniper JN0­740 LINUX FOUNDATION CERTIFIED SYSTEM ADMINISTRATOR (LFCS) exam product. I am going to tell you the most authentic source for Juniper JN0­740 exam preparation.

User friendly interface of JN0­740 Practice Software

Pass4sureTest Practice Software has a user friendly interface that will make it easier for clients and customers to work with.

Self­assessment feature of JN0­740 LINUX FOUNDATION CERTIFIED SYSTEM ADMINISTRATOR (LFCS) Practice Software Pass4sureTest Practice Software will allow you to see rapid improvement over time as they will allow you to get better and better as you continue to practice your exam skills. Juniper JN0­740 Juniper ACX/ Certification Exam’s Practice Software has a self­assessment feature which will allow you to testify and rectify your mistakes with its result.

Customizable learning experience with Pass4sureTest Our Pass4sureit offer a highly customizable learning experience as you can vary our products to the exam you wish to try out or the features you need to put to the test.

Discount for Juniper ACX/ JN0­740 exam product Our JN0­740 exam product also offer discounts that range from 30 to 50%.

Money Back Guarantee We offer refunds within seven days if the exam product is not to your liking or if it has not satisfactory learning or preparatory material for the Juniper JN0­740 LINUX FOUNDATION CERTIFIED SYSTEM ADMINISTRATOR (LFCS) exam.

Security and Privacy You can be sure that with our use of McAfee and SSL­64, our JN0­740 exam product has been absolutely safe for you to use without breach of your safety or personal information at any cost.

Free demo of Juniper JN0­740 Practice Software We offer free demos; this means that you can download and try out our free demos before opting for the opinion of downloading and buying the entire exam product in question. Download FREE Demo of Juniper Juniper ACX/ Certification Exam’s Practice Software and check it’s germane.

Juniper JN0-740

Exam Name: ACX, Specialist (JNCIS-ACX)

http://www.pass4sureit.com/JN0-740-practicetest.html

Product: Demo

We also offer PRACTICE TEST SOFTWARE with Actual Exam Questions - Try free demo from our Website

Question: 1 What is the initial default username and password for all ScreenOS devices?

A. administrator/password B. root/password C. netscreen/netscreen D. admin/netscreen1

Answer: D Question: 2 Which operating system is used on a NetScreen device?

A. IOS B. Junos C. FreeBSD D. ScreenOS

Answer: A Question: 3 When is NAT used?

A. for Layer 2 switching B. for MPLS VPNs C. to translate between IP addresses D. for secure tunnels

Answer: B Question: 4 What is a zone used for?

A. to bundle interfaces together for redundancy B. to bundle interfaces sharing identical security requirements C. to provide a tunneled connection across a network D. to protect against spam attacks

Page |2 Page |2

We also offer PRACTICE TEST SOFTWARE with Actual Exam Questions - Try free demo from our Website

Answer: D Question: 5 Which two devices run ScreenOS software? (Choose two.)

A. NetScreen-5200 B. NetScreen-5400 C. SRX240 D. MX480

Answer: C,D Question: 6 Which security feature provides secure tunnels across a public network?

A. dynamic routing B. Web filtering C. IPsec D. firewall filters

Answer: A Question: 7 By default, from which hardware component is the startup copy of the ScreenOS loaded?

A. ROM B. NVRAM C. TFTP server D. Internal Flash E. PCMCIA Card

Answer: D Question: 8 Using the CLI, if the startup copy of the ScreenOS on a NS-204 is corrupted, from which two (2) alternate locations can an image be loaded?

Page |3 Page |3

We also offer PRACTICE TEST SOFTWARE with Actual Exam Questions - Try free demo from our Website

A. ROM B. TFTP server C. Internal Flash D. PCMCIA Card E. Compact Flash Card

Answer: B,E Question: 9 By default, from which hardware component is the startup copy of the ScreenOS loaded?

A. NVRAM B. TFTP server C. internal flash D. PCMCIA card

Answer: C Question: 10 Using the CLI, if the startup copy of the ScreenOS is corrupted, from which location can an image be loaded?

A. TFTP server B. internal flash C. PCMCIA card D. Compact Flash Card

Answer: A Question: 11 In the packet flow decision process, which pair identifies interzone traffic?

A. source and destination MAC B. source and destination interface C. source and destination TCP port D. source and destination IP address

Answer: B Page |4 Page |4

We also offer PRACTICE TEST SOFTWARE with Actual Exam Questions - Try free demo from our Website

Question: 12 A ScreenOS firewall has one interface in the user zone and one interface in the servers zone. Both interfaces are addressed and active. The configured policy allows user traffic from the user zone to the FTP server in the servers zone, but the traffic does not cross the firewall from the client to the server. What is the most likely problem with the firewall?

A. The ScreenOS firewall has no physical connection to the FTP server.

B. The ALG option on the ScreenOS firewall has not been enabled for FTP traffic.

C. The ScreenOS firewall does not have a route defined to the FTP server's subnet.

D. The ScreenOS firewall does not have a route defined to the FTP client's subnet.

Answer: C Question: 13 When a firewall receives the first packet in a series, what will it immediately do?

A. Check its route table.

B. Check its session table.

C. Determine if traffic is crossing zones.

D. Verify that it is not malformed or a fragment.

Answer: D Question: 14 In the packet forwarding decision process, how is the second packet handled differently than the first in a series of allowed interzone packets?

A. The second packet causes an ARP query.

B. The second packet is checked against the policy table.

C. The second packet is forwarded without a sanity check.

D. The second packet is forwarded without checking the route table.

Answer: D Question: 15 In the flow decision process, the system has found a route entry matching the packet destination IP. Which pair will identify the policy that is applied to this packet?

Page |5 Page |5

We also offer PRACTICE TEST SOFTWARE with Actual Exam Questions - Try free demo from our Website

A. source and destination MAC B. source and destination interface C. source and destination TCP port D. source and destination IP address

Answer: B Question: 16 Assuming factory default settings, which statement describes the minimum requirements for WebUI management access?

A. Connect a PC addressed on the 192.168.1.0 subnet to any interface, open a browser and access 192.168.1.1 B. Terminate the bootup sequence from the console device, open a browser on the console device and access 192.168.1.1 C. Connect a PC addressed on the 192.168.1.0 subnet to the lowest numbered interface, open a browser and access 192.168.1.1 D. Using the CLI, define an IP address on a physical interface, connect a PC to the interface and open a browser to the interface address E. Using the CLI, assign an IP address to the VLAN1 interface, connect a PC to any interface and open a browser to the VLAN interface address

Answer: C Question: 17 When configuring the Untrust interface with an IP address and enabling Telnet and WebUI management, which sequence of steps must be performed to make the interface operational at the end of the configuration sequence?

A. Assign the interface to a zone, define the IP address, enable Web and Telnet services B. Assign the interface to a zone, define the IP address, accept default management services C. Assign the interface to a virtual router, define the IP address, enable Web and Telnet services D. Assign the interface to a zone, define the IP address, define a manage IP address, accept default management services E. Assign the interface to a virtual router, define the IP address, define a manage IP address, enable Web and Telnet services

Answer: A Question: 18

Page |6 Page |6

We also offer PRACTICE TEST SOFTWARE with Actual Exam Questions - Try free demo from our Website

Assuming factory default settings, which statement describes the minimum requirements for WebUI management access?

A. Connect a PC addressed on the 192.168.1.0 subnet to any interface, open a browser and access 192.168.1.1 B. Terminate the bootup sequence from the console device, open a browser on the console device and access 192.168.1.1 C. Connect a PC addressed on the 192.168.1.0 subnet to the product-specific interface for the device, open a browser and access 192.168.1.1 D. Using the CLI, define an IP address on a physical interface, connect a PC to the interface and open a browser to the interface address.

Answer: C Question: 19 You are configuring an interface in the untrust zone with an IP address, telnet enabled, and WebUI management. Which sequence of steps must be performed to make the interface operational at the end of the configuration sequence?

A. Assign the interface to a zone, define the IP address, enable Web and telnet services.

B. Assign the interface to a zone, define the IP address, accept default management services.

C. Assign the interface to a virtual router, define the IP address, enable Web and telnet services.

D. Assign the interface to a zone, define the IP address, define a manage IP address, accept default management services.

Answer: A Question: 20 What will change the root admin password?

A. set admin password <password> B. set root-admin password <password> C. set admin <name> password <password> D. set admin user <name> password <password>

Answer: A Question: 21 Telnet management has been enabled on an interface in the untrust zone. What else should be configured to limit telnet access to the ScreenOS device from trusted management PCs?

Page |7 Page |7

We also offer PRACTICE TEST SOFTWARE with Actual Exam Questions - Try free demo from our Website

A. Define a permitted IP address.

B. Define a policy from trust to untrust.

C. Define a trusted IP in the address table.

D. Define a manage IP address on this interface.

Answer: A Question: 22 Assuming factory default settings, which statement describes the minimum requirements for WebUI management access to the SSG 5?

A. Connect a PC addressed on the 192.168.1.0 subnet to any interface, open a browser and access 192.168.1.1.

B. Terminate the bootup sequence from the console device, open a browser on the console device and access 192.168.1.1.

C. Connect a PC addressed on the 192.168.1.0 subnet, to the highest numbered interface and open a browser and access 192.168.1.1.

D. Using the CLI, define an IP address on a physical interface, connect a PC to the interface and open a browser to the interface address.

Answer: C Question: 23 Which statement is correct regarding administrator privileges?

A. Any Administrator can change their privileges on an as-needed basis B. Administrator privileges can only be established and changed by the Root Administrator C. Administrator privileges can be established and changed by the Root and All-privilege Administrator D. Administrator privileges can only be established by the Root and can be changed by the Root and All-privilege Administrator

Answer: B Question: 24 What is the purpose of the 'Permitted IP' address on a NetScreen device?

A. It defines which range of address can access devices connected to the NetScreen B. It defines a list of addresses that are trusted to perform management on the NetScreen C. It is used in policy rules to determine which user traffic is allowed through the NetScreen D. It is the address that an external device uses to gain management access to a NetScreen E. It defines a list of devices whose traffic can pass through the NetScreen without being authenticated Page |8 Page |8

We also offer PRACTICE TEST SOFTWARE with Actual Exam Questions - Try free demo from our Website

Answer: B Question: 25 Which three (3) statements are correct regarding tasks that can be performed only by the Root administrator?

A. reset command B. unset all command C. ScreenOS upgrade D. traceroute command E. On-line asset recovery

Answer: B,C,D

Page |9 Page |9

We also offer PRACTICE TEST SOFTWARE with Actual Exam Questions - Try free demo from our Website

THANKS FOR TRYING THE DEMO OF OUR PRODUCT

Visit Our Site to Purchase the Full Set of Actual JN0-740 Exam Questions with Answers.

http://www.pass4sureit.com/JN0-740-practice-test.html

We Also Provide Practice Exam Software That Simulates Real Exam Environment And Has Many Self-Assessment Features. Download Free Product Demo From Our Web Site:

Money Back Guarantee

http://www.pass4sureit.com/JN0-740-practice-test.html

P a g e | 10 P a g e | 10