Pass4Sure MSC-241 exam questions

"

Exam Code: MSC­241 Vendor: IBM Exam Name: Design and Deploy for MOTOTRBO Solutions EMEA Cert Name: Motorola Radio Solutions/

Get 30% Discount on MSC­241 Economy Pack Economy Pack Includes: 1. MSC­241 Economy Pack Comes with 30% Discount 2. MSC­241 Practice Test Software And PDF 3. MSC­241 Verified Answers And MSC­241 Free Updates 4. Instantly Available to Start MSC­241 Exam Preparation 5. MSC­241 Multiple Learning Modes 6. 24/7 Support on Email and Live Chat Only $111 $99

MSC­241 PDF (Questions And Answers)

Format: MSC­241 PDF Available for All Devices MSC­241 Verified Questions 100% passing guarantee

Only $79 $69

Certification exams in general Giving a certification exam is no mean feat; on it rests the establishment of one’s future career and reputation; thus one must firstly know that according to whichever career they have chosen, they can give a certification exam accordingly. Keeping this mind, one must also think very cleverly of which preparatory material to use.

IBM MSC­241 Exam product features Our IBM MSC­241 exam products bear features such as giving you access to a PDF which has all of the same questions and answers to the ones in the Motorola Radio Solutions/ certification exam followed by Pass4sureit’s practice test software on which you could test the skills you have recently acquired.

There are many sites that provide preparation material for IBM Motorola Radio Solutions/ MSC­ 241 exam. Keep your eyes open and make a gentle decision while purchasing IBM MSC­241 Design and Deploy for MOTOTRBO Solutions EMEA exam product. I am going to tell you the most authentic source for IBM MSC­241 exam preparation.

Reliability of MSC­241 exam product Pass4sureit Our IBM MSC­241 Design and Deploy for MOTOTRBO Solutions EMEA exam products are highly reliable as they provide you with updated material all the time and they do not ask for or abuse your personal information

Free Updates of MSC­241 exam We also provide free updates of Motorola Radio Solutions/ MSC­241 exam that we send straight to your inbox, free of charge till your success.

Refund policy for Design and Deploy for MOTOTRBO Solutions EMEA exam We provide refunds in a little over seven days if you are dissatisfied with the quality of our MSC­241 Design and Deploy for MOTOTRBO Solutions EMEA exam product or feel that it can not really help you out. Once your purchase our product; your success will become our responsibility.

Security and Privacy ­ Pass4sureit We will also ensure that all of your private data remains secure due to Pass4sureit’s high security protocols such as McAfee, Norton antivirus or even SSL­64.We will also ensure that your personal data fed online remains private as we will ascertain that it is not made use of by viruses or stolen by hackers.

Self­assessment feature of IBM MSC­241 Practice Software Our IBM MSC­241 Design and Deploy for MOTOTRBO Solutions EMEA exam product will also surely make you realize how well you are improving over time as you continue to practice and use our Motorola Radio Solutions/ certification exam product. You can assess and improve yourself with the help of self­assessment feature.

User friendly interface of IBM MSC­241 exam product Our MSC­241 Motorola Radio Solutions/ certification exam products have a highly user friendly interface that will make working with it via clients and customers much easier.

Customizable learning experience We also offer a highly customizable learning experience as you can set your exam preferences according to your preparation objective. We would recommend you to try our free demo and if it fulfills your expectations then you ought to buy the entire MSC­241 certification exam

"

Motorola MSC-241

Exam Name: Design and Deploy for MOTOTRBO Solutions EMEA

http://www.pass4sureit.com/MSC-241-practicetest.html

Product: Demo

We also offer PRACTICE TEST SOFTWARE with Actual Exam Questions - Try free demo from our Website

Question: 1 A MOTOTRBO repeater is installed on top of a tall building located in a downtown area. The repeater provides excellent coverage to a large area. This is a single repeater, connected to a four-stack dipole antenna via a duplexer and low loss cable. Unfortunately, some of the users are complaining that the radio signal is very poor in the downtown area, and in some places, close to the repeater, they get no signal at all. What is the MOST likely explanation for this?

A. The antenna is faulty or repeater is faulty.

B. A duplexer should not be used on a tall building.

C. The radiation pattern of the antenna and its HAAT (Height Above Average Terrain) is resulting in overshoot.

D. Any one of these could explain what the users are experiencing.

Answer: C Question: 2 When a Master Repeater in an IP Site Connect system is behind a NAT firewall router, what IP address is used in all peer repeaters for the Master Repeater?

A. The LAN address of the master repeater B. The Limited Broadcast IP address of the LAN subnet C. The WAN address of the router D. The DHCP address assigned by the router

Answer: C Question: 3 A two-way radio site with flat terrain and very little ground clutter has a unity gain transmit antenna with a measured Effective Radiated Power (ERP) at 40 Watts. What can be expected if the antenna is changed to a 6 dB gain omnidirectional antenna (select TWO)?

A. Radio receive signal strength closer to the horizon decreases.

B. Radio receive strength closer to the horizon increases.

C. Radio receive signal strength directly below the site increases.

D. Radio receive signal strength directly below the site decreases.

Answer: B, D Question: 4 Page |2 Page |2

We also offer PRACTICE TEST SOFTWARE with Actual Exam Questions - Try free demo from our Website

A Capacity Plus system is operating at a remote site with a WAN connection to a local service shop for monitoring with RDAC. An IP networking failure caused an outage to the remote site. How will this impact the Capacity Plus system’s performance?

A. Repeaters will not be able to assign the next Rest Slot.

B. The increased end-to-end IP Latency will result in garbled voice audio.

C. The IP network failure will prevent voice calls from being assigned across all repeaters.

D. RDAC will not be able to monitor system, but no impact to Capacity Plus system performance.

Answer: D Question: 5 When a Master Repeater is behind a NAT firewall router what must be configured in the router to ensure that all traffic destined to the Master Repeater is routed correctly?

A. DHCP server - The master repeater uses a DHCP address assigned by the router.

B. Enable Port forwarding - All traffic targeted to the master repeaters source port must be port forwarded to the master repeater’s IP address.

C. Route table - All WAN traffic targeted to the router’s WAN address must be routed to the master repeater’s LAN address.

D. Disable Port forwarding

Answer: B Question: 6 How does a radio obtain its Air IP Address? It is: A. Provided by DHCP. B. Received during ARS registration.

C. Provided by the repeater.

D. Derived by DMR ID of the radio.

E. Provided by the presence notifier during registration.

Answer: E Question: 7 What is the purpose of RF antenna isolation?

A. Reduce the antenna wind load on the tower.

B. Protect the RF equipment from lightning strikes.

Page |3 Page |3

We also offer PRACTICE TEST SOFTWARE with Actual Exam Questions - Try free demo from our Website

C. Reduce the harmful effects of external transmit carriers.

D. Electrically insulate the antenna from the mounting structure.

Answer: C Question: 8 Services and/or applications such as Text Messaging, Telemetry, and GPS, which are loaded in the radio, are uniquely identified by which of the following?

A. TCP port B. UDP port C. IP address of the application D. Application ID

Answer: B Question: 9 MOTOTRBO IP Site Connect uses which of the following Internet Protocol packets for communication between repeaters?

A. TCP B. UDP C. SNMP D. SIP

Answer: B Question: 10 You are in the process of staging a Capacity Plus system for a new client. Your project manager has asked you to perform in-house testing of the repeaters without RF networking equipment by terminating the output of the PA . Given this request, which of the following statements is TRUE? A. The RF output can be unterminated.

B. This can be done with a Network Analyzer.

C. This can be done with a 50 Ohm RF “dummy� load.

D. This can be done with a wattmeter with a capacity of 100 watts or more.

Answer: C

Page |4 Page |4

We also offer PRACTICE TEST SOFTWARE with Actual Exam Questions - Try free demo from our Website

Page |5 Page |5

We also offer PRACTICE TEST SOFTWARE with Actual Exam Questions - Try free demo from our Website

THANKS FOR TRYING THE DEMO OF OUR PRODUCT

Visit Our Site to Purchase the Full Set of Actual MSC-241 Exam Questions with Answers.

http://www.pass4sureit.com/MSC-241-practice-test.html

We Also Provide Practice Exam Software That Simulates Real Exam Environment And Has Many Self-Assessment Features. Download Free Product Demo From Our Web Site:

Money Back Guarantee

http://www.pass4sureit.com/MSC-241-practice-test.html

Page |6 Page |6