The Petersen Multi-Flex ÂŽ
TM
Annular Seal
The sure way to by-pass a manhole for repairs Main Pipeline to be by-passed Multi-FlexTM Annular Seal
Internal By-pass Pipe
Solutions Solutions Solutions Solutions Solutions Solutions Solutions Solutions Solutions
Multi-FlexTM Annular Seal 421 Wheeler Avenue, P.O. Box 340 Fredonia, Wisconsin 53021-0340, U.S.A. Phone: 1-262-692-2416 or 1-800-926-1926 Fax: 1-262-692-2418 or 1-800-669-1434
Solutions INNOVATION QUALITY SOLUTIONS RESULTS
When size matters! For our complete product line of plumbing solutions please visit our website.
PetersenÂŽ Annular Seals can accommodate almost any size, pressure, chemical, and temperature requirement. Annular seals are very flexible and easy to install.
www.PetersenProducts.com
www.PetersenProducts.com
We are a high-response manufacturer of quality pipeline and plumbing equipment.
At Petersen, the highest quality products, engineering experience, and unmatched service are offered along with the pride of serving the industry since 1916.
E-mail: sales@petersenproducts.com
Pipe Plugging Solutions: Thank you for the training I received on Inflatable Bags. It has been both rewarding and a pleasure working with you since our first meeting at the Offshore Technology Conference in May of 1999. The successes we both have had in designing and building equipment to meet the special requirements of our customers has been very rewarding. I appreciate everything you have done to make this possible. I have very high regard for your analytical and problem solving ability in achieving an objective and creating solutions to problems. Tom Bowling, Team Industrial Services Just to let you know we have completed the work in Bangladesh using the Petersen Plug and it was a great success. Whenever we need or hear of anyone doing this kind of work we will gladly recommend Petersen. Victor Lane, Chevron
Cameco Cigar Lake Uranium Mine is the largest uranium mine in the world. Flooding via a fissure occurred in August 2008 at the 420-meter level and completely stopped work. To stop the flooding, Cameco had to create a barrier in that level that would completely seal off the area of inflow. Cameco Project Engineer Brian Dixon, decided to use an inflatable tunnel seal (ITS) from Petersen Products Company. The ITS, which is a cylindrical plug designed to expand to approximately seven meters when inflated, had to be positioned and oriented precisely by an ROV, and then filled from the surface not once, but twice: once with water to check position, and then with a custom formulated grout to form a permanent seal. In October 2009, after all grout was set, Cameco reported that the water inflow had “been remediated,” and in February 2010, dewatering crews reentered the working level of the mine, 480 meters (1,575 feet) beneath the surface and 60 meters (197 feet) below the previously flooded 420m level.
261 Series Tapper
Muni Style Inflatable Plugs
1/4” to 3” steel 1/4” to 6” plastic
Small and large by-pass for testing most pipeline sizes.
Duke Power needed to plug a 42-inch line located 12 feet under the basement of a nuclear power plant. The piping for fuel, chemical transport, water supply, and cooling needs is typically very complex and subject to high temperatures and pressures. Shutting down entire lines is not practical as realities dictate that plants must be kept running more or less continuously. Downtime is simply unacceptable so it is necessary to plug a pressurized pipeline. Plugging the nuclear power plant line went smoothly and the Petersen Plug was kept in place for a week before being removed. Southern Louisiana Refinery had two banks of exchangers operating, but one was contaminated by leaking gas. To fix the leak and keep at least one exchanger bank working, they would have to plug a 16 inch inlet under 180 psi, with temperatures up to 230ºF. A Petersen® Inflatable Line Stop Plug “bag” was inflated with diesel fuel, “that way, if there was a leak, there wouldn’t be contamination. The bag was in for six months and didn’t fail.”
Grace-Titan 60” Water Pipeline: When Brian Simon, a project manager at Grace-Titan DVBE (based in Redding, CA) first looked at the Potter Valley By-pass job it looked difficult. GraceTitan was being asked to remove a section of the 100-year-old five-foot diameter penstock that supplies Pacific Gas & Electric’s (PGE) Potter Valley hydroelectric plant and install a Y-branch. Grace-Titan was told to expect flow leakage as high as 1,200 gpm. A physical block was needed and an existing 18-inch manway presented the best opportunity. “We hadn’t done anything like this before, so we did some research,” says Simon, “and it seemed like an inflatable plug was the way to go.”
Inflatable Line Stops
Petersen Products fabricated a plug that could be folded for insertion through the manway, then inflated with water to fill and block the penstock. “We opened up the manway and inserted the plug. Once in place, the plug was tethered with dual aircraft cables. The plug sealed well, and held for the entire seven weeks of the project.”
Plumber Style Rubber Test Plugs Popular with plumbers for all types of low pressure blocks and tests.
129 Series Tee Plug (For high pressure line stop) Inflated HOT TAP SLEEVE INFLATED PLUG
Deflated 118 & 119-Series Multi-Flex™ Packers W & W/O By-Pass Allows smooth sectional repair even with broken pipe.
150-Series Completion Plug The Completion Plug is installed between the tapping sleeve or nozzle flange and a valve. This allows the valve to be removed or replaced without depressurizing the pipeline.
262-2040 Pneumatic Tapping Machine
114 & 124-Series Multi-Flex™ Plugs Very flexible. Inflates up to 8x for multi-size use. Durable, longer-lasting than rubber molded plugs.
129-Series Multi-Flex™ High Pressure Hot Tap Insertion Line Stop Plugs The 129-Series LS Plugs may be customized for most size, pressure, chemical, and temperature requirements.
CENTERING GUIDE INFLATED PLUG
129 Series Dual Plug (For block and bleed and redundancy)
1/4” to 6”
High Pressure Mechanical Plugs
262-0312 Hydraulic Tapping Machine
128 Series Plug (For By-Pass through tap)
3” to 12”
Available for most size, chemical, pressure, and temperature requirements.
Top Illustration: Line Stop Plug directly below the tap. It is generally Install a simpler to install and has a shorter launch system but a large tap hole. Petersen®
Medium Pressure Mechanical Plugs W & W/O By-Pass Customized for almost any blocking or testing requirement.
Petersen Products Company • P hone 1-262-692-2416 or 1-800-926-1926 •
129-Series Line Stop Plugs This high pressure plug may be used as a line stop, but is also used as a lift cylinder for lifting cylindrical objects.
See our full line of products and services at our website: www.PetersenProducts.com
Middle Illustration: Install a Petersen® Dual Plug downstream redundancy of the tap. This system also allows by-pass through the tapping valve if desired. Bottom Illustration: Install a Petersen® Line Stop Plug downstream of the tap. This system also allows by-pass through the tapping valve if desired.