Catalogue EN 2008 Automotive tools
EUROPEAN MANUFACTURER OF HAND TOOLS SINCE 1919 www.uniortools.com
Maintenance
3 -21
Lubrification and filtration
22-24
Bodywork
25 -35
Wheels, steering and hubs
36 - 4 0
Suspension and transmision
41- 42
Ignition and carburation
43 - 4 4
EAN-13
check-digit designating the product designating the manufacturer, supplier country of origin of the EAN-code – not of the product
2
EAN-code In the catalogue In the catalogue, only the last six figures are indicated under the EAN-code, the first seven being identical for all products.
2008
MAINTENANCE
Pliers for ‌. are used for opening the tube clamps, enabling quick and safe removal of tubes from tube prolongations. They are also used for closing the tube clamps when tubes are attached to tube prolongations to prevent tubes from falling off the prolongations and thus ensuring safe movement of fluids. The pliers have been designed in such a way so that only a minimum force is sufficient to create large pressure upon the clamp, ensuring safe and durable connection of the tube to the tube prolongation. The pliers have been shaped in such a way so that they can be efficiently used at places which are difficult to access, thus enabling quick and easy handling. Firm and safe grip is ensured by the ergonomic shape of the handles.
2077
SPRING CLIP PLIERS
Use for : Alfa Romeo, Audi, Citroen, Fiat, Ford, Hyundai, Lancia, MAN, Mercedes, Opel/Vauxhall, Peugeot, Porsche, Renault, Seat, Toyota, VW, Volvo, itd.
Material: carbon tool steel materia pivoting tip: special carbon tool steel fits most standard size clamps For hose clips on cooling, heating, fuel or screen-washer systems position lock makes it easy to replace hose clamps surface finish: crome plated tips burnished heavy duty double - component handles jet stamp UNIOR Code
EAN
L
619250
192505
235
280
3
MAINTENANCE
Pliers for …. are used for opening the tube clamps, enabling quick and safe removal of tubes from tube prolongations. They are also used for closing the tube clamps when tubes are attached to tube prolongations to prevent tubes from falling off the prolongations and thus ensuring safe movement of fluids. The pliers have been designed in such a way so that only a minimum force is sufficient to create large pressure upon the clamp, ensuring safe and durable connection of the tube to the tube prolongation. The pliers have been shaped in such a way so that they can be efficiently used at places which are difficult to access, thus enabling quick and easy handling.
2078
SLOTHOLDER PLIERS FOR OETIKER® COLLARS
Material: carbon tool steel for automotive pressed axlecuffs OETIKER® exact deformation of the axlecuff ear longer, for easy deformation of axlecuff ears for almost all passanger cars surface finish: crome plated heavy duty double - component handles jet stamp UNIOR Code 619251
4
EAN 192512
Firm and safe grip is ensured by the ergonomic shape of the handles. Use for: Audi, BMW, Chrysler, Ford, GM, Honda, Mazda, Mercedes, Nissan, Opel/Vauxhall, VW
L 230
280
2008
MAINTENANCE
This tool is used for the removal of the quick couplers that connect fuel lines. The tool has two forged pins in the jaws that compress the couplers during removal or repair (the hose can then be removed). The jaw is dimensioned and adjusted to enable safe and easy work with great force in a limited space. Use for: Opel/Vauxhall, Fiat, GM, VW, Renault itd.
2079
QUICK COUPLER PLIERS FOR FUEL PIPES
Material: carbon tool steel for disconnecting fuel pipes with spring for reopenning surface finish: crome plated tips burnished heavy duty double - component handles jet stamp UNIOR
Code 619252
EAN 192529
L 206
223
5
MAINTENANCE
Pliers for …. are used for opening the tube clamps, enabling quick and safe removal of tubes from tube prolongations. They are also used for closing the tube clamps when tubes are attached to tube prolongations to prevent tubes from falling off the prolongations and thus ensuring safe movement of fluids. The pliers have been designed in such a way so that only a minimum force is sufficient to create large pressure upon the clamp, ensuring safe and durable connection of the tube to the tube prolongation. The pliers have been shaped in such a way so that they can be efficiently used at places which are difficult to access, thus enabling quick and easy handling.
2080
Firm and safe grip is ensured by the ergonomic shape of the handles.
CLIC® COLLAR PLIERS
Material: carbon tool steel to remove and reassemble CLIC spring-clips separating and closing with 180° invert of the pliers surface finish: crome plated heavy duty double - component handles jet stamp UNIOR
Code 619253
6
EAN 192536
Use for: Audi, Citroen, Fiat, Mercedes, Opel/Vauxhall, Peugeot, Renault, VW,...
L 190
190
2008
MAINTENANCE
The tool for stopping the flow of fluids is an indispensible tool when changing various automotive parts connected with liquid-bearing hoses. The tool’s main function is the stoppage of the flow of various fluids in soft hoses so that a mechanic can replace a certain car part without interruptions or worrying over a potential spillage. The tool can be used on soft hoses in cars, trucks, farming machines as well as various nautical vessels, however, the hose diameter may not exceed 55 mm at any time, as in that case the stoppage of the flow is not guaranteed. GRIP HOSE CLAMP PLIERS FOR STOPPING THE FLOW OF FLUIDS Material: jaws – special carbon steel. Material: sheet metal handle. used for the stopping of the flow of oil, gasoline... jaws are free of sharp edges, so that sensitive hoses do not sustain damage. plastic moulded T handle enables improved grip for the user. universal locking mechanism. fast and simple stoppage of the flow of fuel and other liquids.
2081
Code
EAN
619254
192543
L 55
285
580
7
MAINTENANCE
This tool is primarily intended for cutting exhaust pipes but, due to the design of its cutting chain and blades, it can also be used for copper pipe, plastic pipe and various other pipes with diameters between 25 and 85 mm. The tool is safe and easy to use due to accessories such as: – a longer cutting chain enabling you to cut pipes with diameters of up to 85 mm; –larger cutting blades, enabling you to cut steel tube up to 3 mm thick, brass tube up to 4 mm thick, PVC tube up to 5 mm thick – a plastic-coated T–handle that decreases the amount of force necessary
2082
to use the tool, enhances grip and prevents slipping;
GRIP PLIERS FOR CUTTING EXHAUST PIPES
– a universal locking mechanism that keeps the tool in position until you
Material: jaws – special carbon steel. Material: handles made from sheet steel. Used for cutting exhaust pipes in partial replacements of exhaust systems. Cutting capacity: 25–85 mm. The plastic-coated T-handle provides better grip for the user. Universal locking mechanism. Very long cutting chain. Code 619255
2082.1
EAN 192550
release the locking mechanism and stop cutting. The cutting chain is subject to wear, which is why we are offering it as a spare part (art. 2082.1).
Ø min
Ø max
L
25
85
330
740
SPARE CHAIN FOR ITEM 2082
Material cutters: alloy steel Code 619256
8
EAN 192567
L 305
200
2008
MAINTENANCE
Studs are screws without a surface that can be gripped, which prevents their removal without damaging them. This tool is intended to do exactly that – removing studs without damaging the threads. The tool works through a system of three rollers that grip the stud at three points during removal, removing the stud without damaging it. The three rollers have no sharp edges, enabling removal without causing damage as they . Despite this, the tool can work in both directions. Tightening with the tool is
2076
not recommended though as the increased force in tightening could damage
ROLLER-TYPE STUD EXTRACTOR
the system of rollers, which are dimensioned solely for loosening.
Material: chrome vanadium roller system grips on to stud, in both directions easy extraction of studs
Code 619238 619239 619240 619241 619242 619243 619244 619245 619246 619247 619248 619249
EAN 192383 192390 192406 192413 192420 192437 192444 192451 192468 192475 192482 192499
M5 M6 M7 M8 M 10 M 12 M 14 R 1/4’’ R5/16’’ R 3/8’’ R 7/16’’ R1/2’’
D
L
21,5 23,5 23,5 23,5 27,5 27,5 34,3 23,5 23,5 27,5 27,5 34,3
60 60 60 60 69 69 72 60 60 69 69 72
19 21 21 21 21 21 21 21 21 21 21 21
3/8’’ 1/2’’ 1/2’’ 1/2’’ 1/2’’ 1/2’’ 1/2’’ 1/2’’ 1/2’’ 1/2’’
Ø16
Ø16
130 130 130 130 180 185 265 130 130 185 185 255
Usage: 1. Position roller-type stud extractor on stud 2. START turning stud extractor COUNTER CLOCK wise 3. When stud removed, simply pull down stud extractor Important: Do not use roller-type stud extractor for tightening!
9
MAINTENANCE
Modular work bench The modular work bench is an indispensible piece of equipment in both professional and home workshops. It is used as a work surface and for safely storing tools large and small, as well as for temporarily laying aside tools and various materials. It is comprised of various modules that enable the composition of various forms of work bench, giving each user the possibility of creating an ideal layout with regard to both your needs and the instalment possibilities. Assembly is fast, simple and safe. A template is included to allow the precise drilling of holes. The components of the modular work bench are made of quality sheet metal up to 3 mm thick. The surface of the work bench’s supporting structure is protected by powder paint, protecting the surface from both mechanical and atmospheric damage, as well as influences from the chemical environment. The counter is made of a massive composite panel allowing for rough work on its surface while, at the same time, it is protected with an environmentally-friendly coating. The counter is robust and hard-wearing and designed to take a heavy surface load
942A10
942A1
942A13
944A1
944A13
10
944A10
944A15
944A21
942A3
942A2
944A19
944A34
944A35 2008
MAINTENANCE
Art. 942A1 942A2 942A3 942A4 942A5 942A6 942A7 942A8 942A9 942A10 942A11 942A12 942A13 942A14 942A15 942A16 942A17 942A18 942A19 942A20 942A21 942A22 942A23 942A24 944A1 944A2 944A3 944A4 944A5 944A6 944A7 944A8 944A9 944A10 944A11 944A12 944A13 944A14 944A15 944A16 944A17 944A18 944A19 944A20 944A21 944A22 944A23 944A24 944A25 944A26 944A27 944A28 944A29 944A30 944A31 944A32 944A33 944A34 944A35
Code 619030 619031 619032 619033 619034 619035 619036 619037 619038 619039 619040 619041 619042 619043 619044 619045 619046 619047 619048 619049 619050 619051 619052 619053 619054 619055 619056 619057 619058 619059 619060 619061 619062 619063 619064 619065 619066 619067 619068 619069 619070 619071 619072 619073 619074 619075 619076 619077 619078 619079 619080 619081 619082 619083 619084 619085 619086 619149 619484
EAN 190303 190310 190327 190334 190341 190358 190365 190372 190389 190396 190402 190419 190426 190433 190440 190457 190464 190471 190488 190495 190501 190518 190525 190532 190549 190556 190563 190570 190587 190594 190600 190617 190624 190631 190648 190655 190662 190679 190686 190693 190709 190716 190723 190730 190747 190754 190761 190778 190785 190792 190808 190815 190822 190839 190846 190853 190860 191492 194844
943P1 943P2 943P3 943P4 943P5 943P6 943P7 943P8 943P9 943P10 943P11 943P12
2 943P1
943P2
943P3
943P4
2
943P5
943P6
943P7
943P8
2 2
2 2
2
2 2 2
2 2
943P9
943P10
2 2
943P11 943P12
11
MAINTENANCE
943P1
943P2
TOOL CHEST BIG - 7 DRAWERS
locking system drawers with ball-bearing slides the syntetic covering protect drawers and tools from damage ecological lacquered with cadmium and lead free colour 7 drawers (five dimensions 585x615x75mm, two dimensions 585x615x155mm) capacity of small drawers: 30kg capacity of large drawers: 42kg possible use of SOS tool tray system in drawers
locking system drawers with ball-bearing slides the syntetic covering protect drawers and tools from damage ecological lacquered with cadmium and lead free colour 8 drawers (seven dimensions 585x615x75mm, one dimension 585x615x155mm) capacity of small drawers: 30kg capacity of large drawers: 42kg possible use of SOS tool tray system in drawers
Code
EAN
A
B
H
618466
184661
665
650
870
943P3
70600
Code
EAN
A
B
H
618467
184678
665
650
870
943P4
TOOL CHEST SMALL - 7 DRAWERS
locking system drawers with ball-bearing slides the syntetic covering protect drawers and tools from damage ecological lacquered with cadmium and lead free colour 7 drawers (five dimensions 415x615x75mm, two dimensions 415x615x155mm) capacity of small drawers: 30kg capacity of large drawers: 42kg possible use of SOS tool tray system in drawers
74000
TOOL CHEST SMALL - 8 DRAWERS
locking system drawers with ball-bearing slides the syntetic covering protect drawers and tools from damage ecological lacquered with cadmium and lead free colour 8 drawers (seven dimensions 415x615x75mm, one dimension 415x615x155mm) capacity of small drawers: 30kg capacity of large drawers: 42kg possible use of SOS tool tray system in drawers
Code
EAN
A
B
H
618468
184685
495
650
870
12
TOOL CHEST BIG - 8 DRAWERS
59400
Code
EAN
A
B
H
618469
184692
495
650
870
63000
2008
MAINTENANCE
943P5
943P6
TOOL CHEST - 2 DRAWERS AND DOOR
locking system drawers with ball-bearing slides the syntetic covering protect drawers and tools from damage ecological lacquered with cadmium and lead free colour 2 drawers dimensions 415x615x75mm with door capacity of small drawers: 30kg possible use of SOS tool tray system in drawers
locking system drawers with ball-bearing slides the syntetic covering protect drawers and tools from damage ecological lacquered with cadmium and lead free colour 4 drawers dimensions 415x615x75mm capacity of small drawers: 30kg possible use of SOS tool tray system in drawers
Code
EAN
A
B
H
618470
184708
495
650
870
943P7
TOOL CHEST - 4 DRAWERS
35200
Code
EAN
A
B
H
618471
184715
495
650
390
943P8
CABINET FOR MODULAR WORK BENCH
31800
SUPPORT FOR MODULAR WORK BENCH
ecological lacquered with cadmium and lead free colour
locking system ecological lacquered with cadmium and lead free colour with door
Code
EAN
A
B
H
618472
184722
495
650
390
9400
Code
EAN
A
B
H
618473
184739
100
650
870
9400
13
MAINTENANCE
LONG WOODEN WORKING PLATE FOR MODULAR WORK BENCH plywood – beech wood protected with environmentally friendly coating
SHORT WOODEN WORKING PLATE FOR MODULAR WORK BENCH plywood – beech wood protected with environmentally friendly coating
943P10
943P9
Code
EAN
A
B
H
618474
184746
1650
750
40
943P11
37400
LONG CONNECTOR FOR MODULAR WORK BENCH
ecological lacquered with cadmium and lead free colour
EAN
A
B
H
184753
2050
750
40
943P12
47200
SHORT CONNECTOR FOR MODULAR WORK BENCH
ecological lacquered with cadmium and lead free colour
Code
EAN
A
B
H
618476
184760
1920
70
50
14
Code 618475
7000
Code
EAN
A
B
H
618477
184777
1520
70
50
5400
2008
MAINTENANCE
These tool trays of polyethylene foam are used for clearer and better organised tool storage in tool boxes, tool cases, the drawers of tool carriages and tool cabinets. This storage is known as the SOS SYSTEM. These tool trays can be used in a wide range of temperatures, do not absorb dampness and, with normal use, have a long lifespan. They protect the tools by holding them in their own specifically designed place, thus preventing them from moving uncontrollably around in the storage area. As the positions in the tray are precisely defined and designed for each specific tool, it is also easy to establish which tools are missing.
SOS System S- Safety O - Order S - Survey System Material: Low density polyethilene foam Operating temperature range: -70°C till +95°C
SOS inserts – advantages: The SOS inserts are made from dual-layered foamed polyethylene, which is resistant to grease, petrol, oil, nitro diluents, adhesives and motor oil – all of which can easily be removed without leaving any visible residue (stains). Adhesives and motor oil need to be removed immediately by cleaning with petrol in order to avoid permanent staining. The inserts remain un-deformed up to a temperature of 80 ºC.
964/1 SOS
SET OF OPEN END WRENCHES IN SOS TOOL TRAY
Code
EAN
Set
619427
194271
6-32
12
2100
Art.
Dim.
110/1
6x7+8x9+10x11+12x13+ 14x15+16x17+18x19+ 20x22+21x23+24x26+ 25x28+27x32
982/1
190 x 370 x 30
964/1A SOS
SET OF OPEN END WRENCHES IN SOS TOOL TRAY
Code
EAN
Set
619428
194288
6-32
Art. 110/1 982/1
12
2400
Dim. 6x7+8x9+10x11+12x13+ 14x15+16x17+18x19+ 20x22+21x23+ 24x27+25x28+30x32 190 x 370 x 30
964/2 SOS
SET OF COMBINATIONS WRENCHES IN SOS TOOL TRAY
Code
EAN
Set
619429
194295
8-24
12
1460
Art.
Dim.
125/1
8+9+10+12+13+ 14+17+19+20+ 21+22+24
982/2
190 x 370 x 30
964/2A SOS
SET OF COMBINATIONS WRENCHES, LONG IN SOS TOOL TRAY
Code
EAN
Set
619430
194301
8-24
12
1710
Art.
Dim.
120/1
8+9+10+12+13+ 14+17+19+20+ 21+22+24
982/2A
190 x 370 x 30
964/2B SOS
SET OF COMBINATIONS WRENCHES IBEX IN SOS TOOL TRAY
Code
EAN
Set
619431
194318
8-24
12
1430
Art.
Dim.
129
8+10+11+12+13+14+15+16+ 17+19+22+24
982/2B
190 x 370 x 30
15
MAINTENANCE
964/3 SOS
SET OF OFFSET RING WRENCHES IN SOS TOOL TRAY
Code
EAN
Set
619432
194325
6-22
8
1190
Art.
Dim. 6x7+8x9+10x11+ 12x13+14x15+ 16x17+18x19+ 20x22 190 x 370 x 30
180/1 982/3
964/4 SOS
SET OF OFFSET RING WRENCHES IN SOS TOOL TRAY
Code
EAN
Set
619433
194332
21-32
4
1970
964/5 SOS
SET OF 1/4” SOCKET WRENCHES WITH ACCESSORIES IN SOS TOOL TRAY
Code
EAN
619434
194349
45
990
Art.
Dim.
188
4+4.5+5+ 5.5+6+7+8+9+ 10+11+13
188.1A BI
157
188.2 BI
150
188.3
120
188.4
150
188.5
50
188.6
41
188.7
1/4”-3/8”
188.8
150
187 HX
3+4+5+6+7 TX8+10+ 15+20+25+ 27+30+40 0.8x4.0+ 1.0x5,5+ 1.2x7.0
187 TX 187 SL
Art.
Dim. 21x23 + 24x26+ 25x28 + 27x32 190 x 370 x 30
180/1 982/4
964/6 SOS
EAN
619435
194356
16
3
PH1+2+3
189
E4+5+ 6+7+8+ 9+10+11
982/5
190 x 370 x 30
964/7 SOS
SET OF BI PLIERS IN SOS TOOL TRAY
Code
187 PH
665
Art.
Dim.
406 BI
180
508 BI
170
461 BI
160
982/6
190 x 370 x 30
SET OF BI AND GRIP PLIERS IN SOS TOOL TRAY
Code
EAN
619436
194363
2
975
Art.
Dim.
445 BI
240
430
250
982/7
190 x 370 x 30
2008
MAINTENANCE
964/8 SOS
SET OF LOCK RING PLIERS IN SOS TOOL TRAY
Code
EAN
619437
194370
4
710
964/10 SOS
SET OF HAMMER AND PUNCHES IN SOS TOOL TRAY
Code
EAN
619439
194394
5
1065
Art.
Dim.
Art.
Dim.
532/4
180
812
300
534/4
180
820
32
536/4
180
640
5
538/4
180
660
150
982/8
190 x 370 x 30
642
5
982/10
190 x 370 x 30
964/9 SOS
SET OF TBI SCREWDRIVERS IN SOS TOOL TRAY
Code
EAN
619438
194387
8
520
Art.
Dim.
605 TBI
0.5x3.0x80, 0.8x4.0x100, 1.0x5.5x125, 1.2x6.5x150
615 TBI
PH0, PH1, PH2
625 TBI
PZ2
982/9
190 x 370 x 30
964/13 SOS
SET OF BALL-END HEXAGON SCREWDRIVER WITH T HANDLE IN SOS
Code
EAN
Set
619440
194400
3-10
6
590
Art.
Dim.
193 HXS
3, 4, 5, 6, 8, 10
982/13
190 x 370 x 30
17
MAINTENANCE
964/15 SOS
964/19 SOS
SET OF VDE BI TOOLS IN SOS TOOL TRAY
Code
EAN
619441
194417
9
960
Art.
Dim.
613 VDE TBI
PH1x80, PH2x100 1.0x5.5x125, 0.4x2.5x75, 0.6x3.5x100
603 VDE TBI 461 VDE BI
EAN 194424
406 VDE BI
180
630 VDE 982/14
29
4370
Art. 190
160
18
Code 619442
160
478 VDE BI
SET OF 1/2” SOCKET WRENCHES WITH ACCESSORIES IN SOS TOOL TRAY
Dim. 10, 14, 18, 22,
11, 12, 15, 16, 19, 20, 23, 24, 30, 32
13, 17, 21, 27,
190.1A BI
260
190.2 BI
380
140
190.3
300
190 x 370 x 30
190.4
240
190.5
125
190.6
75
192 HX
5, 6, 8, 10, 12
982/18
360 x 374 x 40
2008
MAINTENANCE
964/22 SOS
964/25 SOS
TOOL SET IN SOS TOOL TRAY
Code
EAN
619451
194516
60
4400
Art. 190
Dim. 10, 14, 18, 22,
11, 12, 15, 16, 19, 20, 23, 24, 30, 32
13, 17, 21, 27,
SET OF 3/8” SOCKET WRENCHES WITH ACCESSORIES IN SOS TOOL TRAY
Code
EAN
619443
194431
23
1580
Art.
Dim.
238
6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22
238.3
165
238.4
250
238.5
125
190.1A BI
260
238.6
54
190.3
300
238.7
3/8” - 1/2”
190.4
250
238.1A BI
200
190.5
125
982/22
190 x 370 x 30
190.6
23
220
TX20, TX25, TX27, TX30, TX40, TX45, TX50, TX55, TX60 5, 6, 7, 8, 9, 10, 12, 14, 17 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10
641
2, 3, 4, 5, 6, 8
642
4
660
150
670
150
982/11
560 X 374 X 40
192 TX 192 HX
19
MAINTENANCE
468 PBI
HEAVY DUTY DIAGONAL CUTTING NIPPERS SHARK
special joint finishing close to cutting edges 3x higher cutting capacity as the traditional cutting nippers for cutting of wire, nails, rivets, screws, pins to dim. 6mm Material: special composition for hardening and tempering entirely hardened and tempered cutting edges induction hardened head ground surface finish: phosphated heavy duty double - component handles jet stamp UNIOR
C B L
A
Code
EAN
L
B
A
C
617778
177786
200
30
18
18
320
Cut ti ng ca pac it y (10 N = 1kg) Dim 200
Ø mm soft wire 6
Ø mm med. hard wire 5
Ø mm hard wire 4
Ø mm piano wire 3.2
”SHARK nippers” 3x higher cutting capacity as the traditional cutting nippers by same hand power
cutting capacity (10N = 1kg)
75
50
25
0
traditional
20
Shark
2008
MAINTENANCE
192 HXSL
BALL END SCREWDRIVER SOCKET, LONG TYPE
Material: socket: chrome molybdenum Chrome plated Polished bit: special tool steel
D L2
Code
EAN
618704 618705 618706 618707
187044 187051 187068 187075
5 6 8 10
D
L1
L2
22,9 22,9 22,9 22,9
203 243 243 243
180 220 220 220
L1
1392 80 110 160 210
CORDLESS IMPACT WRENCH
free speed max. 1600 revolution per minutes max. torque 350 Nm voltaage 19,2V battery 3.0Ah Ni-Mh with fast battery charger charging time 60 minutes in plastic case
Code
EAN
619205
192055
1/2�
A
L
285
273
torqueNm 350
3518
21
LUBRIFICATION AND FILTRATION
As car repair shops usually need to replace various types of oil filters, we have developed a tool that can be used on the majority of standard ones. When used, the tool conforms to the filter as tightening it makes it grip the filter. The tool can be used on all filters with diameters ranging from 60 to 120 mm. Because of the limited space during changing, the tool is sized and adjusted to require as little space as possible. The hooks are ribbed to make them suitable for filters without an edge to allow gripping and which would be difficult to replace with conventional methods.
1976
ADJUSTABLE OIL-FILTER WRENCH
The tool works in both directions and thus allows both the tightening
material gripping arms: carbon tool steel removes all type of oil filters from 60 to 120 mm diameter arms are ribbed, for better griping oil filter for assembeling or dissasembeling oil filters used with ratchet 3/8« and proper extension bar
Code
EAN
Φ min
619257
192574
60
22
Φ max 120
and loosening of oil filters, as it adjusts and utilises the effort invested optimally in both cases.
H 3/8’’
62
600
2008
LUBRIFICATION AND FILTRATION
This tool comes in as many as 8 sizes, which can be used on the majority of standard car oil filters on the market. Using it is simple as all that is needed is to place the appropriate tool on the filter and rotate it with ease. The tool can also be used when fitting oil filters as the design and material have been carefully selected so that the tool can withstand the maximum force applied to it. Because of the surface protection, the tool is highly resistant to scratches and damage as well as to atmospheric and chemical effects.
1977
OIL-FILTER WRENCH
use 3/8« square drive tool for oil filters in restricted access area coated with electro-black oxide finish for rust protection for assembeling or dissasembeling oil filters Ribs Code
EAN
D
360°/n
D1
H
619258 619259 619260 619261
192581 192598 192604 192611
66 65 74 75-77
6P 14P 15P 15P
73 70,7 81 81,4
37 36,8 36 41,8
ribs flat flat ribs
114 120 134 150
Fiat (Punto 1.2), Renault (Clio 1.2 Express, Kangoo, Twingo) … Daihatsu, Toyota, … Ford, Opel, … VW, Audi, Isuzu, Mercedes, Opel …
619262
192628
76
12P
82
35
ribs
126
Fiat (Ducato, Scudo, Ulysee), Renault (Megane, Laguna, Espace III, Trafic 1,9diesel, Master 1,9diesel), Peugeot (307), Honda, Opel (Vivaro), Mercedes (vsi modeli z Purflux filtrom), …
619263
192635
86
16P
96
47,2
flat
188
619264
192642
86
18P
92
39,5
ribs
156
619265
192659
96
18P
102
36,8
ribs
172
Flat
Model
Volvo (S40, S60, S70, S80) , BMW (316i,318i `01-letnik dalje), … VW(Golf III/Passat 96-letnik in novejši), Audi A6-96letnik z TDI motorjem 115KM, Renault (Clio, Rapid 1,9D, Laguna, Safrane, Espace III 2,1D, … Audi (A4, A6 Tdi), VW (Passat 97-letnik daljeTDI, Touareg V10TDI), Renault (laguna 2.2D, Safrane 2.2D, Espace 2.2D, Megane 1.9/2.1D Tdi)
23
LUBRIFICATION AND FILTRATION
This tool has three removable hooks that grip the gas tank cap firmly so it does not move. As access to this cap is usually difficult when making replacements, the tool is constructed so that it requires minimum space. Simply place the tool on the cap and rotate in the appropriate direction. The tool adapts to the cap itself and the cap can then be removed very quickly. The replacement of the cap is also straightforward. This tool ensures safe work and a long service life.
1978
WRENCH FOR RESERVOIR
Material arms: carbon tool steel for removing plastic fuel tank nut quick griping of fuel tank nut use with socket or wrench dimension 22 for assembeling or dissasembeling
Code
EAN
D min
619266
192666
120
205
D max 155
H 22
73
STRAP WRENCH
Material: chrome vanadium chrome plated
L
Code
EAN
L
Φ min
Φ max
601024
010243
220
60
140
206
606
221
175
CHAIN WRENCH
L
Material: chrome vanadium chrome plated
WRENCH FOR OIL DRAIN PLUGS
Material: chrome vanadium chrome plated
L1
L2
D
Code
EAN
L
Φ min
Φ max
601025
010250
220
60
140
24
374
Code
EAN
605112
051123
8 x10
L1
L2
D
203
169
10
298 2008
BODYWORK
This tool for the removal of the front windscreen wiper arms has a robust construction and enables the application of greater forces when removing front windscreen wiper arms that have become “glued� to the drive shaft as well as extending the service life of the tool. They are used for removing wipers that are elevated above the surface of the car body. Working with this tool is straightforward and quick.
1941
FRONT WIND-SHIELD WIPER ARM REMOVER
material housing and spindle: carbon tool steel for removing front wind shield wiper arms for almost all types of cars protects plastic on housing off wiper arms use with wrench dimension 17
Code 619270
EAN 192703
L max
D max
32
18
260
This tool for the removal of rear windscreen wipers is designed to enable the simple removal of all types of rear wipers. The adapter on the remover spindle is protected during work by the hose that supplies the cleaner fluid. The dorn included in the set makes it possible to turn the spindle faster and, if greater removal force is required, to use a 13 mm wrench. The construction of the tool ensures its long service life.
1942
REAR WIND-SHIELD WIPER ARM REMOVER
Material jaws: chrome vanadium for removing rear wind-shield wiper arms special adoptor, for protecting wiper arm hose use with wrench dimension 13 supplied with dorn
Code 619271
EAN 192710
L max
D
25
22-53
265
25
BODYWORK
A set of tools for the removal of glued windscreen glass with the aid of a wire. Using the longer tool, make an opening between the car body and the glass, through which you run the wire that is then attached to both tools. Using the »T« shaped tool, pull the wire between the car body and the glass, thus separating them. The tool is made to allow fast and safe work, while its shape ensures that the work is performed without expending excessive energy.
1943
WINDSCREEN REMOVAL SET
Material: special carbon steel. for removing front and rear windscreen extra long nose of the lever, for better accessibility when removing windscreens
Code 619272
EAN
L1
L2
192727
354
78
1943.1SQ Code 619611
Code 619612
26
SQUARE STEEL WIRE FOR WINDSCREEN REMOVAL SET
EAN 196114
1943.1R
274
L (m) 22
85
ROUND STEEL WIRE FOR WINDSCREEN REMOVAL SET
EAN 196121
L (m) 22
80
2008
BODYWORK
This tool is used for extracting fastening pins, removing trim and for various upholsteries. Their ergonomic design allows easy and safe work in various positions and in difficult to reach places without damage to the items being extracted or removed.
1940
TRIM PIN REMOVER
Material: carbon tool steel for removing trim pin till 8mm tip angled ground heavy duty double - component handles
Code
EAN
L
B2
B1
A
619267
192673
230
28
8,5
2,5
1940.1
134
1940.2
TRIM PIN REMOVER
TRIM PIN REMOVER
Material: carbon tool steel for removing trim pin till 4,5mm heavy duty double - component handles
Material: carbon tool steel for removing trim pin from 2mm till 15mm heavy duty double - component handles
Code
EAN
L
B2
B1
A
619268
192680
230
28
16,3
2,5
139
Code
EAN
L
B2
B1
A
619269
192697
230
10
5
2,5
112
27
BODYWORK
182 TX
Code
EAN
612030 612031 612032 612033
120300 120317 120324 120331
182B TX
6762.1
FLAT RING WRENCHES WITH TX PROFILE
Material: chrome vanadium chrome plated jaw opening DIN 475 ISO 691 hardness DIN 899 rust prevention DIN EN 12540
B1 A
6x8 10 x 12 14 x 18 20 x 24
B2
L
L
B1
B2
A
97 112 157 174
10 12,7 16,5 23
11,3 14 21 27,3
4,6 5,6 6,6 8,6
IMPACT SCREWDRIVER
18 29 57 150
L
Code
EAN
605062
050621
L 1/2”
144
6762
IMPACT SCREWDRIVER SET
Code
EAN
605061
050614
14
660
1160
FLAT RING WRENCHES WITH OFFSET HEAD TX PROFILE
Material: chrome vanadium chrome plated jaw opening DIN 475 ISO 691 hardness DIN 899 rust prevention DIN EN 12540 15° angle assure to screw the nut on difficult of acces places Code
EAN
612892 612893 612894 612895
128924 128931 128948 128955
6x8 10 x 12 14 x 18 20 x 24
B1
B2
L
15˚
A
L
B1
B2
A
97 112 137 174
10 12,7 16,5 23
11,3 14 21 27,3
4,6 5,6 6,6 8,6
18 29 57 150
ART.
Dim.
6762.1 6762.2 6480 6483 6484 6489 6492
6762.2
1.2x6.5+1.6x8.0+2.0x12.0 PH 2,3 PH 4 5.6 TX 20,25,30,40
ADAPTOR 1/2” - 5/16”
L
28
Code
EAN
605063
050638
L 1/2” - 5/16”
37
60
2008
BODYWORK
433 A
WELDERS` GRIP PLIERS
Material: jaws - chrome molybdenum, handles from sheet steel parellel clamping is achieved by straight line motion of the flexible jaw one handed operation small size and parallel clamping action for easy access into difficult and confined areas wide flat jaws, for spot welding Code
EAN
612887 128870
433 B
A D
L
D max
C
A
B
200
12
30
50
70
WELDERS` GRIP PLIERS
Material: jaws - chrome molybdenum, handles from sheet steel parellel clamping is achieved by straight line motion of the flexible jaw one handed operation small size and parallel clamping action for easy access into difficult and confined areas straight jaws, for assembling flat sheet material
L
555
A D B
EAN
612888 128887
Code
EAN
L
D max
B
A
612890
128900
200
19
25
15
L 220
C
D B
L
D max
C
A
B
7
20
15
45
510
433 E
Code
WELDERS` GRIP PLIERS
EAN
612891 128917
A C
D
L
B
L
D max
B
C
A
210
14
25
14
15
470
WELDERS` GRIP PLIERS
Material: jaws - chrome molybdenum, handles from sheet steel parellel clamping is achieved by straight line motion of the flexible jaw one handed operation small size and parallel clamping action for easy access into difficult and confined areas wide curved jaws, for spot welding, and assembling angular shapes
Code
455
A
Material: jaws - chrome molybdenum, handles from sheet steel parellel clamping is achieved by straight line motion of the flexible jaw one handed operation small size and parallel clamping action for easy access into difficult and confined areas curved jaws, for spot welding, and assembling angular shapes
433 C
L
WELDERS` GRIP PLIERS
Material: jaws - chrome molybdenum, handles from sheet steel parellel clamping is achieved by straight line motion of the flexible jaw one handed operation small size and parallel clamping action for easy access into difficult and confined areas wide curved jaws, for spot welding, and assembling angular shapes Code
433 D
C
B
EAN
612889 128894
A C
C
D
B
L
L
D max
C
A
B
230
10
12
25
45
555
29
BODYWORK
434 A
434 D
WHEEL AND RACK GRIP PLIERS
jaws droped forged from special tool steel handles made from sheet steel surface finish: nickel plated screw chrome plated
WHEEL AND RACK GRIP PLIERS
jaws droped forged from special tool steel handles made from sheet steel surface finish: nickel plated screw chrome plated
A
A
L
L
max
Code 616721
434 B
EAN
L
A
167213
270
16
max
Code 120
690
616724
EAN
L
A
167244
250
16
100
620
WHEEL AND RACK GRIP PLIERS
jaws droped forged from special tool steel handles made from sheet steel surface finish: nickel plated screw chrome plated
A
L max
Code
EAN
L
A
616722
167220
220
16
434 C
50
500
WHEEL AND RACK GRIP PLIERS
jaws droped forged from special tool steel handles made from sheet steel surface finish: nickel plated screw chrome plated
A
L max
Code
EAN
L
A
616723
167237
250
16
30
80
640
2008
BODYWORK
1900 Code
EAN
619226
192260
1910
6
7500
Article
Artikel 1923 1925 1927 1929 1934 1936
1901
AUTO BODY REPAIR TOOL SET
1 1 1 1 1 1
Code
EAN
619227
192277
1932 1934 1936 1924 1925 1926 1927
Double end hand dolly Curved dolly Toe dolly Drip moulding spoon Pick & finishing hammer Shrinking hammer
1911
CURVED DOLLY
7
7500
Article
Artikel
Material: carbon tool steel head polished: mirror polished
1 1 1 1 1 1 1
Standard bumping hammer Pick & finishing hammer Shrinking hammer Utility dolly Curved dolly Heel dolly Toe dolly
ANVIL DOLLY
Material: carbon tool steel head polished: mirror polished
Code
EAN
A1
A2
B
H
619206
192062
80
74
58
70
1912
AUTO BODY REPAIR TOOL SET
1500
Code
EAN
A
B
H
619207
192079
102
72
62
1913
ROUND PEEN END DOLLY
Material: carbon tool steel head polished: mirror polished
1400
LIGHT DINGING SPOON
Material: carbon tool steel head polished: mirror polished
Code
EAN
D
B
H
619208
192086
54
44
425
700
Code
EAN
L
619209
192093
250
D
B
H
110
48
51.5
290
31
BODYWORK
1914
1917
DOUBLE END ROUND DOLLY
Material: carbon tool steel head polished: mirror polished
Code
EAN
D1
D2
H
619210
192109
56
56
58
1915
757
EAN
619211 192116
1916
EAN
A
192130
171
B
H
58.5
401
1700
1918
DOUBLE BLADE SPOON
Material: carbon tool steel head polished: mirror polished
A1
B1
A2
B2
90
70
39.9
38.2
H 125 1300
Code
EAN
A
B
H
619214
192147
179
59
510
1919
FLAT SPOON
Material: carbon tool steel head polished: mirror polished
2200
FLAT SPOON
Material: carbon tool steel head polished: mirror polished
Code
EAN
L
B
619212
192123
250
29.5
32
Code 619213
LARGE END DOLLY
Material: carbon tool steel head polished: mirror polished
Code
DOUBLE BLADE SPOON
Material: carbon tool steel head polished: mirror polished
C
H
4
99
1300
Code
EAN
L
B
H
619215
192154
266
51
68.5
2200
2008
BODYWORK
1920
1923
ANGLE DOLLY
Material: carbon tool steel head polished: mirror polished
Code
EAN
A
B
H
619216
192161
109
59
17
1921
670
THIN DOE DOLLY
Code
EAN
619219 192192
1924
Material: carbon tool steel head polished: mirror polished
A1
B1
86
61
A2
B2
61
H
61.5
74.5 1375
UTILITY DOLLY
Material: carbon tool steel head polished: mirror polished
Code
EAN
A
B
H
619217
192178
118
55
24
1922
DOUBLE END HAND DOLLY
Material: carbon tool steel head polished: mirror polished
960
Code
EAN
A
B1
B2
H
619220
192208
76
73
48
66
1925
GRID DOLLY
Material: carbon tool steel head polished: mirror polished
1375
CURVED DOLLY
Material: carbon tool steel head polished: mirror polished
Code
EAN
A
619218
192185
122
B
H
59.5
30
1125
Code
EAN
A
619221
192215
133
B
H
58.5
45
1625
33
BODYWORK
1926
1929
HEEL DOLLY
Material: carbon tool steel head polished: mirror polished
Material: carbon tool steel head polished: mirror polished
Code
EAN
A
B
H
619222
192222
79
30
61
1927
1125
EAN
L
B
H
192253
236
49
70
1313
REVERSE CURVE HAMMER
Material: carbon tool steel head polished: mirror polished handle: octagonal shape, hickory wood
Code
EAN
A
619223
192239
121
B
H
58.5
29
1396
Code
EAN
L
A
619228
192284
325
27
1931
SHRINKING DOLLY
Material: carbon tool steel head polished: mirror polished
D
H
29.6
106
390
CURVED PEIN & FINISHING HAMMER
Material: carbon tool steel head polished: mirror polished handle: octagonal shape, hickory wood striking face: round 40mm
Code
EAN
A
619224
192246
122
34
Code 619225
1930
TOE DOLLY
Material: carbon tool steel head polished: mirror polished
1928
DRIP MOULDING SPOON
B
H
59.5
25.5
Code 1375
EAN
619229 192291
L
A
B
D
H
325
8
19.6
40
140
460
2008
BODYWORK
1932
1935
STANDARD BUMPING HAMMER
Material: carbon tool steel head polished: mirror polished handle: octagonal shape, hickory wood striking face round: 40mm, square: 38mm
Material: carbon tool steel head polished: mirror polished handle: octagonal shape, hickory wood striking face: round 40mm and 32mm
Code
EAN
L
A
D
H
619230
192307
325
38
40
100
1933
390
EAN
619231 192314
1934
Code
EAN
L
D1
D2
H
619233
192338
326
40
32
155
1936
STRAIGHT PEIN & FINISHING HAMMER
Material: carbon tool steel head polished: mirror polished handle: octagonal shape, hickory wood striking face: round 40mm
Code
FENDER & PANEL DINGING HAMMER
473
SHRINKING HAMMER
Material: carbon tool steel head polished: mirror polished handle: octagonal shape, hickory wood striking face round: 40mm, square: 38mm serrated square stricking fase
L
A
B
D
H
325
8
19.6
40
140
460
Code
EAN
L
A
D
H
619234
192345
325
38x38
40
100
490
PICK & FINISHING HAMMER
Material: carbon tool steel head polished: mirror polished handle: octagonal shape, hickory wood striking face: round 40mm
Code
EAN
L
D1
D2
H
619232
192345
325
40
12
138
460
35
WHEELS, STEERING AND HUBS
This tool is intended for the disassembly of various wheel hubs. It is designed for simple and flexible use. With the extractor hooks supplied, the hubs can be removed with three, four or even five hooks, depending on the type of hub. Because its use is extremely flexible due to the five extractor hooks, the tool is useful for the majority of hub types up to a diameter of 250 mm. The tool consists of a spindle, five extractor hooks and forged hook handle. The handle also has an additional notch that prevents the extractor hooks from sliding off the tool during the assembly or disassembly of the hub. The strong construction allows safe and longterm use with high loads. We recommend that you do not use pneumatic hammers!
2027
HUB AND WHEEL DRUM PULLER
Material hook cups: krom molybdenium with five extractor hooks for extracting wheel hubs, up to a hole diameter of 250 mm;
D2 D1 max max 619278 192789 250 18,5 Code
36
EAN
n 24
3-5
4640
2008
WHEELS, STEERING AND HUBS
2029
SOCKET 1/2’’ FOR PULLING DOWN THE BRAKE DRUM
Material: socket chrome molybdenum screw special carbon tool steel for removing brake drum two pieces in set
Code
EAN
D
L
619148
191485
22,9
64
2028
L1 M8
28
84
WHEEL BALANCING PLIERS
Material: chrome vanadium surface finish: crome plated handles plastic dipped
Code
EAN
L
619288
192888
250
390
37
WHEELS, STEERING AND HUBS
231P CB
SET OF1/2” IMPACT SOCKETS FOR ALLOY WHEELS
Code
EAN
Set
616770
167701
17-21
3
750
212
WHEEL NUT WRENCHES
Material: chrome vanadium chrome plated forged and oil hadened
D1
L2 D2 L1
Art.
Dim.
231P
17,19,21
231P
1/2” IMPACT SOCKETS FOR ALLOY WHEELS
Material: chrom molybdenum black finish with plastic protection
Code
EAN
616762 616763 616764 616765
167626 167633 167640 167657
231P L
15 17 19 21
D2
D2
L
T
24 27 29 31
30 30 30 30
80 85 85 85
14 14 15 17
38
175 218 214 239
EAN 17 19 21
D1
L2
D2
26 28,5 32 33,5 38,5 42,5 48 48
300 300 300 400 400 400 400 400
12 12 12 14 20 20 20 20
720 806 850 1300 2250 2560 2780 2780
WHEEL NUT WRENCHES
Material: chrome vanadium chrome plated forged and oil hadened
Code
EAN
600782 600783
007823 007830
213
D1
D2 T
Code
L1 260 280 300 315 355 425 430 430
L2
100
O
L1
1/2” IMPACT SOCKETS FOR ALLOY WHEELS
619015 190150 619016 190167 619017 190174
17 19 22 24 27 30 32 33
L
D1
Material: chrom molybdenum black finish with plastic protection
EAN 007854 007861 007878 007885 007892 007908 007915 098159
210
D1 T
Code 600785 600786 600787 600788 600789 600790 600791 609815
17 19
L1
L2
255 285
27 29,5
399 551
FOUR WAY RIM WRENCHES
Material: chrome vanadium forged and oil hardened lacquered
L
L
D1
D2
L
T
27 29 31
25 30 30
130 130 130
24 24 24
268 344 383
L
DIN 3319, ISO 6788
Code
EAN
600810 600811 600809 600812 600813 600814
008103 008110 008097 008127 008134 008141
L 17 17 17 17 24 24
19 19 19 19 27 27
11/16” 22 21 22 30 30
1/2” 1/2” 23 24 3/4” 32
370 370 370 370 700 700
1245 1268 1306 1311 3874 3900 2008
WHEELS, STEERING AND HUBS
300 C
TYRE LEVERS
Material: chrome vanadium chrome plated ergonomic heavy duty double component handle
a L
b
Code
EAN
L
axb
613103 613104 613105
131030 131047 131054
320 410 610
1,1 x 13 1,5 x 15 1,5 x 21
300C CB
235 500 800
431
Code
EAN 131061
3
Art.
L
Code
EAN
L
A
ÎŚD
601554
015545
330
53
25
405
1700 Dim.
300 C
320,410,610
686
PROFESSIONAL BALL JOINT PULLER
Material: carbon tool steel surface finish burnished screw entirely hardened tempered jaws induction - hardened for cars
TYRE LEVERS
D L
Material: chrome vanadium forged hardened and tempered surface finish: zinc plated
L
Code
EAN
L
617661 601755 601756 601757
176611 017556 017563 017570
200 300 400 500
300 A
A D
SET OF TYRE LEVERS WITH HANDLE
613106
300
BRAKE SPRING PLIERS
Material: special composition for hardening and tempering entirely hardened and tempered loose oil hardened head, phosphated suface finish: chrome plated
Code
EAN
D
L
601772
017723
16
260
107 275 338 524
686/1
TYRE LEVERS
Material: chrome vanadium forged hardened and tempered surface finish: zinc plated
L
Code
EAN
L
601758
017587
537
940
1030
PROFESSIONAL BALL JOINT PULLER
Material: housing and nut from cast iron claws drop forged , hardened and tempered jaws induction-hardened screw entirely hardened tempered for removing separate bearing inner races in engines, dynamos etc
D L
Code
EAN
D
L
602369
023694
18
260
1080
39
WHEELS, STEERING AND HUBS Use: Fixed torque wrenches are mainly used in the automotive industry, namely when changing tyres or when the preset torque is sufficient for the required torque.
How to apply the torque:
* Select the right torque wrench for the required level of torque. * Apply the socket with the required size on the base. * Apply the socket precisely on the wheel lug nut. * Turn the torque wrench handle until you hear a CLICK. * When you hear the CLICK, the desired torque has been reached and the lug nut is properly fastened. * Stop fastening.
Advantages: Its advantage compared to adjustable and other torque wrenches is that it requires no time-consuming setting of the torque amount because several different torque amounts have already been preset. Fixed torque wrenches are colour-coded and differ in the preset torque amounts - different colours of the plastic strip on the handle mean different torque amounts. Due to these clear markings you will be able to find the desired wrench quickly and easily and save even more time. When the desired torque is reached, the wrench emits a characteristic noise so that the user immediately knows when to stop fastening. When released, the wrench resets itself to the starting position and can be used again to apply the torque. All fixed torque wrenches are in line with standards such as ISO 6789, ANSI 107.14M, U.S. Fed GGG-W-686D, which stipulate precisely the calibration quality and accuracy, giving you a guarantee of quality. As this wrench features a fixed torque amount, its internal structure differs from the Unior standard and adjustable wrenches in that it is more durable, less prone to wear and tear and consequently requires less servicing due to incorrect use.
267A
267B
PRE-SET TORQUE WRENCHES FOR CARS
Code
EAN
Nm
lbf.ft
618915 618916 618917 618918 618919
189154 189161 189178 189185 189192
90 100 110 120 130
66.4 73.7 81.1 88.5 95.9
40
PRE-SET TORQUE WRENCHES FOR TRUCKS
* Material: material: chrome vanadium guaranteed to meet ISO 6789, ANSI 107.14M and U.S. Fed GGG-W-686D torque is preset easy to use and calibrate factory calibrated for accuracy to within +/-4%
* Material: chrome vanadium guaranteed to meet ISO 6789, ANSI 107.14M and U.S. Fed GGG-W-686D torque is preset easy to use and calibrate factory calibrated for accuracy to within +/-4%
black yellow gray red blue
L
Code
EAN
Nm
lbf.ft
400 400 400 400 400
618920 618921 618922 618923 618924
189208 189215 189222 189239 189246
400 450 500 550 600
295 332 369 406 442
L green purple khaki/sand light blue orange
950 950 950 950 950
2008
SUSPENSION AND TRANSMISION
This Unior professional tool, under article number 2051, is intended for the removal of car shock absorbers and is mainly used to compress the springs in MacPherson struts. Since the number of versions of the MacPherson strut is always increasing, the tool set contains three different pairs of grippers that almost completely cover the range of different MacPherson struts. The tool set also includes a spacer bar for conical springs, which increases the usefulness of the Shock Absorber Remover. Development of this tool took safety into account as the large forces involved in removing shock absorbers may present a risk of injury to the user. For this reason, all grippers in the set feature enlarged grip edges to firmly grip the spring in the tool thus preventing any possibility of slipping, which could injure the tool user. The maximum load for the tool is up to 6000 N. SUSPENSION COMPRESSOR FOR SHOCK ABSORBER SPRINGS How it works: 1. Select the appropriate cup for your spring. 2. Place the remover on the spring. 3. START compressing the shock absorber spring.
2051
Code
EAN
L max
619279
192796
300
The tool is supplied in a durable PVC case that enables easier and safer transportation.
D 21
80 - 195
7500
D Cup 1 Cup 2 Cup 3
80 - 115 110 - 150 140 - 195
2 2 2
41
SUSPENSION AND TRANSMISION
176
177
DOUBLE ENDED OFFSET SOCKET WRENCHES
Material: chrome vanadium chrome plated
D2
L3
D1
L2
95
O
L1
ISO 2236
Code
EAN
609102 609103 609104 609105 609106 609107 609108 609109 609110 609111 609112 609113 609114 609115 609116 609117 609118 609119 609120 609121 609122 609123 609124 609125 609126 609127 609128 609129
091020 091037 091044 091051 091068 091075 091082 091099 091105 091112 091129 091136 091143 091150 091167 091174 091181 091198 091204 091211 091228 091235 091242 091259 091266 091273 091280 091297
6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 32 35 36
L1
L2
C
D1
T
L3
D2
105 105 126 126 134 135 143 150 170 171 197 197 209 209 220 220 241 241 242 242 278 278 294 300 316 305 385 395
22 22 25 25 30 30 34 34 40 40 45 45 52 52 54 54 60 60 63 63 67 67 71 73 75 79 93 94
21 21 24 25 30 30 34 34 40 40 46 46 49 49 55 55 61 61 65 65 70 70 70 85 85 85 88 88
10 11 12 13 15 16 17 20 21 22 24 25,3 28,5 28,5 29,5 30 32 33 34,5 35 36 36,5 38,5 40 42 44 48,5 49,5
7 8 9 9 12 13 13 13 14 15 17 18 18 19 21 22 22 24 25 26 27 28 29 30 31 32 35 36
27 27 30 30 36 36 43,5 43,5 48 48 57 57 61 61 63,5 63,5 68 74 77,5 77,5 81 81 84 90 96,5 97,5 100 101
6 6 7 7 8 8 8 12 12 14 15 15 15 15 15 15 16 20 20 20 22 22 23 24 25 25 27 27
DOUBLE ENDED OFFSET SOCKET WRENCHES
Material: chrome vanadium chrome plated
L3
D1
L2
T C
95
O
L1
ISO 2236
37 38 68 68 120 123 168 190 220 225 320 360 380 430 488 500 683 750 683 717 800 875 1050 1100 1367 1467 1560 1700
Code
EAN
609083 609084 609085 609086 609087 609088 609089 609090 609091 609092 609093 609094 609095 609096 609097 609098 609099
090832 090849 090856 090863 090870 090887 090894 090900 090917 090924 090931 090948 090955 090962 090979 090986 090993
177 CB
176 CB
D2
SET OF DOUBLE ENDED OFFSET SOCKET WRENCHES IN CARTON BOX
8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
L1
L2
C
D1
T
L3
D2
126 126 134 135 143 150 170 171 197 197 209 209 220 220 241 241 242
25 25 30 30 34 34 40 40 45 45 52 52 54 54 60 60 63
24 25 30 30 34 34 40 40 46 46 49 49 55 55 61 61 65
12 13 15 16 17 20 21 22 24 25,3 28,5 28,5 29,5 30 32 33 34,5
9 9 12 13 13 13 14 15 17 18 18 19 21 22 22 24 25
30 30 36 36 43,5 43,5 48 48 57 57 61 61 63,5 63,5 68 74 77,5
7 7 8 8 8 12 12 14 15 15 15 15 15 15 16 20 20
T C
68 68 120 123 168 190 220 225 320 360 380 430 488 500 683 750 683
SET OF DOUBLE ENDED OFFSET SOCKET WRENCHES IN CARTON BOX
Code
EAN
Set
609100
091006
8-24
16
5590
8+9+10+11+12+13+14+15+16+17+18+19+21+22+23+24
Code
EAN
Set
609130
8-24 16 5590 091303 8+9+10+11+12+13+14+15+16+17+18+19+21+22+23+24 609131 091310 8-32 22 13000 8+9+10+11+12+13+14+15+16+17+18+19+21+22+23+24+26+27+ 28+29+30+32
42
2008
IGNITION AND CARBURATION
186 SET
SET OF SPARK PLUG SOCKETS WITH ACCESSORIES 3/8”
Code
EAN
Set
600779
007793
21
4
710
Art.
Dim.
186 BI
SET OF SPARK PLUG SOCKETS WITH ACCESSORIES 3/8”
186.1
290
Code
EAN
Set
186.2 186.3 186.4
45 75 21
619401
194011
21
186.4
4
710
Art.
Dim.
238.1F
290
186.2 186.3 186.4
45 75 21
3/8” SPARK PLUG SOCKETS
Material: chrom molybdenum chrome plated
D L
Code
EAN
600776 603192 603193
007762 031927 031934
21 19 16
D
L
27 26 22
66 63 63
125 120 90
194 D1
T - HANDLE SPARK PLUG WRENCHES SWIVELING SOCKET
Material: chrome vanadium chrome plated
D
B L
185
Code
EAN
608111 608112
081113 081120
16 20,8
D
B
L
21 27
250 250
300 300
630 668
SPARK PLUG WRENCHES
Material: carbon tool steel chrome plated
B
D
L
Code
EAN
600771 607956 600772 600773
007717 079561 007724 007731
16 19 21 21
D
L
B
19 22 24 24
145 115 115 180
120 120 120 120
160 150 160 240
43
IGNITION AND CARBURATION
194 D1 L
KLJUČ T, ZGLOBNI, ZA SVEČKE, DOLG
Material: krom vanadi, kovan kromiran
D
B L
Code
EAN
608115 608116
081151 081168
200
16 20,8
D
B
L
21 27
250 250
500 500
936 974
200 CB
STARTER AND BLOCK WRENCHES
Material: chrome vanadium chrome plated jaw opening DIN 475 ISO 691 hardness DIN 899 rust prevention DIN EN 12540
Code
EAN
600671 600672 600673 600674 600675 600676
006710 006727 006734 006741 006758 006765
11 x 13 13 x 17 14 x 17 15 x 16 15 x 17 19 x 22
B1
B2
L
A1 L
B1
B2
A1
A2
150 185 185 185 185 230
16,5 19,2 20,5 21,6 21,6 27,2
19 24,2 24,2 23,6 24,2 31,8
7 8,7 8,7 8,7 8,7 10
8,5 10,3 10,3 10,3 10,3 11,5
SET OF STARTER AND BLOCK WRENCHES IN CARTON BOX
A2
58 104 110 106 106 175
Code 200 CB 600677
701
EAN 006772
Set 11-22 5 11x13,13x17,14x17,15x16,19x22
615
FEELER GAUGES
certificate of conformity; stainless steels
44
Code
EAN
diameter
Pcs/Set
601896 601897 601898
018966 018973 018980
0,05 - 0,5 0,05 - 1 0,05 - 1
8 13 20
2008
Design: Iztok Skok
DIN 862