Iiee 1q 2014 07242014

Page 1


VISION 2020: IIEE’s Roadmap Towards Excellence

The Institute of Integrated Electrical Engineers (IIEE) of the Philippines, Inc. focuses on Vision 2020, a sixyear elaborative initiative, to continuously instill the Institute’s core values, vision and mission. The Institute envisions an emphasized service for excellence, following the well-known equation, E=mc2. E stands for Excellence, m for Membership, and c2 for Community and Country. To be able to attain this objective, IIEE devised a medium-term strategic plan: VISION 2020. The five (5) strategic focuses for 2014 to 2020 are the following: 1) Chapter and Membership Development – IIEE is committed to retain the satisfaction of both the membership and chapters, to enhance membership competitiveness, to continuously promote IIEE programs, to utilize technology as enabler, to advocate members to become PEE, to harness chapter talents, and to elevate membership engagement and satisfaction. This development is measured through: 1) Percentage of updated contact details, 2) No. of ASEAN chartered members, 3) Rate of board passers, 4) No. of programs/courses launched, 5) Participation rate, and 6) Satisfaction Index. 2) Financial Growth and Sustainability – To optimize resources and to develop effective financial planning and control are the specific objectives with regards to the financial growth and sustainability of the Institute. IIEE shall sustain programs and projects by promoting financial accountability and stewardship. This is measured by: 1) Budget Utilization, 2) Surplus, 3) Annual Growth, 4) Cost containment Index and, 5) Cost to serve. 3) Corporate Image – As the only Accredited Professional Organization (APO) of electrical practitioners in the Philippines, IIEE aims to enhance regulatory influence, develop and sustain corporate branding, and develop pool of experts/resource

persons. By accomplishing these objectives, IIEE shall establish reputation and thought leadership, expand influence in the industry, and sustain advocacy on relevant national issues. Its measures include: 1) Top of mind survey, 2) Number of programs implemented, 3) Number of Memorandum of Understanding (MOU)/ Memorandum of Agreement (MOA), and 4) Number of public consultations/hearings. 4) Operational Excellence and Process Innovation – Professional quality membership services should be offered. With regards to this, the Secretariat will continue the enhancement of services to inspire the members to participate more on IIEE activities. The objectives for operational excellence and process innovation are: to enhance operational effectiveness, to establish people program, and to institute continuous process improvement. Its measures include turn around time and employee satisfaction index. 5) Program Management and Advocacy – IIEE must be in the forefront in the electrical and energy industry, strengthen network relations and build strategic partnerships and alliances, sustain advocacy on relevant national issues. Unity is the key to establish the Institute as experts in the industry. We have to ensure that members will be involved in every program and advocacy of IIEE. We also have to: ensure full implementation of RA 7920, enhance local and international linkages, enhance advocacy initiatives, and establish collective opinion process. Percentage of licence renewal, number of MOU/MOA, number of proposals/papers submitted, and number of public hearing/ consultations are the measures of the program management and advocacy.


MEMBERSHIP COMMUNITY

COUNTRY

SERVICE FOR EXCELLENCE

Integrity Innovation In order to succeed with these goals, we shall go back to the basics. In connection with this, our focal point is the basic unit of the Institute: the CHAPTER. Every member shall perceive the success and growth of IIEE, thus everyone should be involved in every program/ advocacy. For 2014, we abbreviated C.H.A.P.T.E.R to further expound plans for the year. • Communication – All channels of communication be open to all by using the present technology (social media) for the interest, information, and concerns of the members. • Harnessing Chapter Talents – Encouraging membership involvement in all levels while promoting succession based on leadership quality. • Alignment of Strategic Goals and Advocacy – Both top-down and bottom-up approaches supported by covenants. Open to strategic collaboration and alliances. • Participative Leadership – Everyone can freely express their thoughts and opinions, to take a more participative role in the decision-making process leads to higher productivity, better contributions from members, and increased group moral.

Excellence

Empowerment

• Training and Development – Continuing professional skills development including coaching and leadership development program for officers, as well as scholarship in post-graduate studies for members. • Employment, Livelihood and Entrepreneurship – The organization’s network creates opportunities for job placement and business for memberships. • Rewards and recognition program – Motivate the membership to continuously improve performances by recognizing their efforts and reward them for their prominence. IIEE envisions “to be the best and most prestigious technical professional organization in the Philippines”. With an aim “to deliver high quality products and services in order to instill excellence in the electrical practitioner, and to enhance the technical profession to enable it to make positive contributions to national development”, IIEE will strive in the growth and development of Filipino electrical practitioners with Integrity, Innovation, Excellence, and Empowerment.


TABLE OF CONTENTS

I - ntegrity I - nnovation E - mpowerment E - xcellence

6

From the Office of the National President

8

Under the IIEE Spotlight

Report for the 1st Quarter 2014

IIEE News and Activities

12

Cover Story

The extent of Philippine Electrical Engineers’ eligibility to be listed in the ASEAN Chartered Professional Engineers Register (ACPER): Basis for a Road Map Model

- Florigo C. Varona, P.E.E., Ph.D.

14

In Memoriam Of

16

Technical Feature

Fault Characterization and Performance of a Mesh Connected Distribution Network with High Penetration of Distributed

Generation (DG)

22

Trainings and Seminars

4

A Tribute to Engr. Jesus C. Santos

The Electrical Engineer 1st Quarter 2014

Mission “To deliver high-quality products and services in order to instill excellence in the Electrical Practitioner, and to enhance the technical profession to enable it to make positive contributions to national development.” Vision “To be the best and most prestigious professional technical organization in the Philippines.” 2014 IIEE Board of Governors and Officers National President VP-Internal Affairs VP-External Affairs VP-Technical Affairs National Secretary National Treasurer National Auditor Governor-Northern Luzon Governor-Central Luzon Governor-Metro Manila Governor-Southern Luzon Governor-Bicol Governor-Western Visayas Governor-Eastern/Central Visayas Governor-Northern Mindanao Governor-Southern Mindanao Governor-Western Mindanao Immediate Former President Executive Director

Alex C. Cabugao Ma. Sheila C. Cabaraban Larry C. Cruz Florigo C. Varona Angel V. De Vera Jr. William J. Juan Virgilio S. Luzares Juan R. Agtarap II Yolanda S. Posadas-Judan Ariel P. Duran Elmer O. Casao Amando D. Lanuza Rogen B. Delos Reyes Wilfredo P. Cañizares Ramil L. Ombina George R. Balili Alvin P. Miguel Gregorio R. Cayetano Sr. Ramon P. Ayaton

IIEE National Secretariat Department Heads Administrative Technical Marketing Membership Finance-OIC

Niellisa Joy B. Bandong Ma. Elena U. Liongson Allen M. Pido Marjorie Aguinaldo-Muñoz Emee F. Sulit


EDITORIAL

Filipino Electrical Practitioners Gearing up for Global Excellence As the country prepares for the ASEAN Economic Community (AEC) in 2015, Filipino electrical practitioners should continuously enhance their skills and knowledge to be globally competitive. Filipino practitioners are undeniably known for their contributions in the country, as well as in the international market. Practitioners should also be able to embrace more challenges to develop their competence. Thus, IIEE gives assistance to practitioners who continuously enhance their competitiveness. IIEE envisions an emphasized service for excellence, devising a medium-term strategic plan for the development of Filipino electrical practitioners, with Integrity, Innovation, Empowerment and Excellence.

Publications Committee Chairman: Vice Chairman: Members:

Rolito C. Gualvez Ronald Vincent M. Santiago Allan C. Nerves Cyrus V. Canto Erlindo C. Tacneng Jr. Kristian Carlo B. Victorio Marvin H. Caseda Florigo C. Varona

Overseer:

The ELECTRICAL ENGINEER The Electrical Engineer is published quarterly by the Institute of Integrated Electrical Engineers of the Philippines, Inc. (IIEE), with editorial and business offices at #41 Monte de Piedad St., Cubao, Quezon City, Philippines. Tel Nos. (632) 722-7383, 7273552, 412-5772, 414-5626, Fax Nos. (632) 721-6442 & 410-1899. Website: www.iiee.org.ph; E-mail: eemagazine@iiee.org.ph. The present circulation of the magazine is 35,000 copies per issue to members and industry stakeholders.

THE Electrical Engineer Editorial Board Chairman: Editor-in-Chief: Associate Editor: Technical Consultant: Administrative Officer:

Florigo C. Varona Rolito C. Gualvez Ronald Vincent M. Santiago Allan C. Nerves Ramon P. Ayaton

Editorial Staff Editorial Assistant

Ana Kristina Cezele B. Besa

Advertising and Marketing Account Executive

Mary Grazellen C. Jose 727-3552 loc. 100 721-6442 / 410-1899

- The Electrical Engineer Magazine Editorial Board About the Cover The cover for the 1st Quarter Issue is a globe and the silhouette of an electrical practitioner, depicting the theme for this year: “Continuously Enhancing Electrical Practitioners’ Competitiveness Towards Global Excellence”. The Electrical Engineer 1st Quarter 2014

5


President’s Report

From the Office of the National President Engr. Alex C. Cabugao 2014 IIEE National President

Heartfelt greetings to my fellow electrical practitioners! As the primary thrust of my administration, the core of my plans and programs is to look back at the basic unit of the Institute, the chapter, to encourage members’ participation and involvement to ensure the attainment of IIEE’s vision, mission and objectives. IIEE VISION 2020 This year we will follow the famous E=mc2 where m stands for membership, c2 for community and country. Therefore, both top-down and bottomup approaches will be applied to align goals and objectives following the five pillars of IIEE as follows: 1.) Chapter and Membership Development which aims to elevate membership engagement and satisfaction, advance membership competence and sustain chapter development. To measure the success or failure, key indicators would be membership growth rate of 15% for this year and additional 1% in the succeeding years and the number of course/ programs launch for the members’ professional development.

6

2.) Financial Growth and Sustainability aiming to sustain programs and projects by promoting financial accountability and stewardship. In a smaller perspective, it valued the optimization of resources and expansion of revenue opportunities as well as developing effective financial planning and control. The key indicators would be the amount of surplus, Php8M and expense/membership ratio of (P66), 53. 3.) Corporate Image which aims to establish reputation and thought leadership, expand influence in the industry and sustain advocacy on relevant national issues which could be measured through number of programs implemented, ten (10) memorandum of understanding/agreement and one representation, public consultation/hearing per quarter. 4.) Operational Excellence and Process Innovation aiming to have effective and efficient delivery of professional quality membership services and continuous learning and growth initiatives. This pillar can be measured through APT or response time at all level of inquiries and operations and to the number of Work Improvement Projects (WIP). 5.) Project Management and Advocacy which aims to strengthen network relations and build strategic partnership and alliances as well as

The Electrical Engineer 1st Quarter 2014


President’s Report

to sustain advocacy on relevant national issues which can be measured through number of proposals/papers submitted and number of membership hearings/consultations. Recognizing the exceptional contributions of chapters to the growth and success of the Institute, it is indeed the perfect time to hear their voices and therefore, letting them feel their importance as members of the Institute. Thus, we created the CHAPTER program to address the chapters’ concerns and necessities. Communication – utilizing all channels and means of communication to reach the membership both in local and international chapters. It also aims to maximize the use of latest information technology to determine the interest and concerns of the general public.

“This year we will follow

the famous E=mc2, where m stands for membership, c2 for community and country.” Harnessing Chapter Talents – encouraging the involvement of members in all levels while promoting succession based on leadership quality. The administration is making ways to encourage the participation of the general public and use their talents to achieve the Institute’s goals and objectives for this year.

Alignment of Strategic Goals and Advocacy – both top-down and bottom-up approaches supported by covenants. It aims to open collaboration and alliances to the local government units, private sectors and among our industry partners. Participative Leadership – encouraging participation among members of a chapter and give chance to hear their voices, taking a participative role in the decision-making process which will lead to higher productivity, better contributions to the members and increase group morale. Training and Development – it entails continuing professional skills development including coaching and leadership development programs for officers and scholarship grant for the members who wanted to pursue post graduate studies (masteral, doctoral). Employment, Livelihood and Entrepreneurship – IIEE will serve as network in providing better opportunities for job placement and business for members. Rewards and Recognition Program – entails as the membership’s motivational tool and encourage them to improve performance to contribute to both chapter and national growth. Regional Governors, on the other hand, are expected to present their programs for this year following the Vision 2020 for the alignment of chapter activities eyeing towards the Chapter Excellence Award. While the committees, both Standing and Ad-Hoc, shall also pattern their activities and programs to the Vision 2020.

The Electrical Engineer 1st Quarter 2014

7


Under the IIEE Spotlight

IIEE-Bataan Chapter Collaborated with UAP-Bataan Chapter in a Technical Seminar IIEE-Bataan Chapter has collaborated with United Architects of the Philippines-Bataan Chapter for a one-day Technical Seminar and Product Presentation last March 1, 2014 at the Leadership Hall of Penelco Main Office. More than one hundred fifty participants from both organizations came to the venue to learn the basics of electrical estimates and PEC. Attendees were counted to be 175 participants consisting of 1 PEE, 24 REE, 21 architects, 20 BS Architecture students and 107 BSEE students. EE NEEDS ARCHITECT: Engr. Cudia during his discussion on Material take off and Estimates (left). HAND IN HAND: Engr. Andres together with Arch. Aguilar (UAP-Bataan Chapter President) handed the certificate of recognition to Engr. Cudia (right).

circumstances. Instead he sent their token to IIEE and UAP Bataan chapters through Engr. Edwin Zaldivar, IIEE-Bataan Chapter VP Internal. REGISTRATION: The registration started at 12NN (Left). FIRST TOPIC: Invited Resource person was Engr. Federico V. Cudia, discussing, “Material take-off and Estimates of Residential and Commercial Electrical Systems”(Right).

The third part of the program was a technical seminar entitled, “Common Provisions of PEC for Residential and Commercial Designs” conveyed by Engr. Roberto C. Ocampo, the president of World ElectricalMech System Inc. (WESM). He discussed first the purpose of the PEC to EE and architects and then defined the common provisions of PEC regarding the planning, execution, violations and enforcement.

ATTENDEES: Attendees were REE’s, PEE’s, RME’s, Architects, BSEE Students and BSAr Students.

Engr. Nelson S. Andres, the chapter president of IIEE-Bataan, jump-started the program through his welcome address. He detailed the reason of coming up with a collaborative technical seminar for the two professions. He stressed that the activity was pursued to build bridges among electrical engineers and architects of Bataan in preparing safe and reliable electrical plans. The first technical seminar was entitled “Material take-off and Estimates of Residential and Commercial Electrical systems”. This was delivered by Engr. Federico V. Cudia, a professor from Mapua Institute of Technology and the president of Powerline Review Center. He started his presentation by acknowledging the commonalities between electrical engineers and architects with respect to the subject matter. He pointed out the importance of architects to electrical engineers in having possible projects. He then headed the discussion to the common materials used in electrical systems and cited different methods and examples of cost estimates. The second part of the program was supposedly a product presentation by AC Harris Wires and Cables. Unfortunately the representative from the company, Mr. Joey Valenzuela did not make it to the program because of unavoidable

8

FRIENDS: Engr. Bobby Ocampo while showing off friendly antics to architects (Left). SERIOUS: Engr. Bobby Ocampo was seriously discussing the faulty electrical wiring (right).

FUNNY: Funny speaker Engr. Bobby Ocampo as he received his Certificate of Recognition from Engr. Andres and Arch. Robert Aguilar. (Left) BATAAN CHAPTER: IIEE Bataan Chapter officers posed for a souvenir photo with Engr. Cudia (right).

As the presentation heated up, several questions were raised by the audience. One of them was from Arch. Ramon Lamira, who questioned about the standard compensation for electrical engineers. He also asked Engr Ocampo about

The Electrical Engineer 1st Quarter 2014


UNDER THE IIEE SPOTLIGHT the significance of Arc Flash Circuit Interrupter (AFCI) to residential buildings and its enforcement. Engr. Ocampo answered all the queries of the audience based on his experience and based on PEC. Wrapping up the seminar was Arch. Robert Aguilar who delivered his closing remarks. He jokingly stated that an architect should have an electrical engineer as a friend. He found it interesting throughout the seminar, after hearing the provisions presented by Engr. Ocampo, that they definitely need a licensed electrical engineer to correct and guide them for a well-planned, safe and reliable electrical plan of residential and commercial buildings.

FAMILY: UAP-Bataan Chapter family posed for a souvenir photo with Engr. Bobby Ocampo.

The attendees of this event mostly uttered that the seminar was over-all informative and interesting. Many of them, especially those in practice of building construction were thankful to our invited speakers for the enlightenment in many aspects of estimates and common violations to PEC. Photo opportunities with Engr. Ocampo were also conducted before the seminar ended. Socialization came afterwards before the egress. FAMILY: IIEE-BPSU Chapter family posed for a souvenir photo with Engr. Bobby Ocampo.

FAMILY: UPSA-BPSU Chapter family posed for a souvenir photo with Engr. Bobby Ocampo.

FAMILY: IIEE-Bataan Chapter family posed for a souvenir photo with Engr. Bobby Ocampo.

16th Northern Luzon Regional Conference

The 16th IIEE Northern Luzon Regional Conference at Bauang, La Union was held on February 28 to March 1, 2014. It was attended by delegates from IIEE Northern Luzon Region. There were activities such as product exhibits, 12 technical presentations were conducted during the event hosted by IIEE-La Union Chapter.

The Electrical Engineer 1st Quarter 2014

9


UNDER THE IIEE SPOTLIGHT

IIEE – CDO 1st Technical Seminar and Plant Tour 2014 The IIEE Cagayan de Oro Chapter conducted its 2014 1st Technical Seminar and Plant Tour with the Theme: “Continuously Enhancing Electrical Practitioners Competitiveness towards Global Excellence”.

The seminar has 2 technical sessions. First discussed was about “Analyzing Interim Mindanao Electricity Market (IMEM): Its Dynamics and Impact to Rates for Consumers of Electricity in the Island of Mindanao” by Atty. Dionel O. Albina, P.Eng’g, Director of the Center for Research in Engineering and Architecture (CREA) of Mindanao University of Science and Technology, and followed by Engr. Clark Darwin M. Gozon, Professor of Mindanao University of Science and Technology, with a topic on “Microcontroller- based Electronic Load Controller (ELC) for Pico Hydro Power Plant”. Part of the activity was the Plant Tour at MINERGY Diesel Power Plant, and was attended by 140 electrical practitioners representing different industries, local government units, academe, and private practitioners all over the city as well as from Bukidnon area.

IIEE-CDO conducted its 1st Technical Seminar and Plant Tour for 2014 on March 1 at Limketkai Center, Cagayan de Oro City,

The seminar was held last March 1, 2014 at Grand Caprice Convention Hall, Limketkai Center, Cagayan de Oro City.

This seminar was chaired by Engr. Rojien V. Morcilla, V.P.-Technical Affairs of IIEE CDO Chapter and was sponsored by GN POWER LTD. CO, MJ Consulting/MSRS Safety, Health & Environmental Training Services, FDC Utilities, FC 98, CEPALCO, and MINERGY Inc. which also held Technical Product Presentations. The IIEE CDO Chapter is very grateful for their support.

IIEE-SQC Conducts Orientation for PEE, REE & RME Aspirants for 2014 Special Professional Licensure Board Examination (SPLBE) in Qatar The IIEE-SQC conducted the orientation for PEE, REE and RME Aspirants for 2014 Special Professional Licensure Board Examination. The Orientation was attended by 25 PEE, 15 REE and 20 RME aspirants. The orientation also includes the presentation of the IIEE-SQC new set of officers and recognition of the 2013 SPLB passers. The activity was graced by Engr. Robert U. Mabulay, one of the Chapter’s Advisers who inspired the aspirants. Engr. Christopher N. requirements for the Engineer.

10

Pino presented the Registered Electrical

IIEE-SQC conducted orientation for the 2014 Special Licensure Board Exam

The Electrical Engineer 1st Quarter 2014


UNDER THE IIEE SPOTLIGHT

IIEE-Camarines joins Fire Prevention Month Celebration The IIEE-Camarines Chapter took part in the observance of the Fire Prevention Month of the Bureau of Fire Protection – Naga City Central Fire Station with its campaign theme: “Isulong ang Kaunlaran, Sunod ay Iwasan, Kaalaman at Pag-iingat ang Kailangan”. The chapter cooperated with the BFP-Naga in campaign for Fire Safety through dissemination safe use of electricity by means of distribution flyers and conduct of Electrical Safety Seminar

its of of to

446 business owners and students in Naga City last March 4, 2014 at the Event Center, SM City Naga. The seminar which was intended to increase the public awareness on electrical safety was handled by Engr. Jigger Bugtong. He discussed topics on safe use of electrical appliances, basic electrical safety practices, and pertinent provisions of Philippine Electrical Code. The activity served as the jump-start of forging close linkage between the IIEE-Camarines and BFP in the campaign on Electrical Safety. As a follow-up activity,, Engr. Analyn Madrid, Engr, Jigger Bugtong and other chapter officers had their dialogue with Insp. Peter Paul Mendoza, Chief of Fire Safety Enforcement Unit, to work on a collaborative effort in the implementation of electrical inspection and enforcement of RA 7920 and PEC.

IIEE-Camarines Chapter cooperated with BFP-Naga in celebrating Fire Prevention Month.

18th Northern Mindanao Regional Conference

The 18th IIEE Northern Mindanao Regional Conference was held at Limketkai Luxe Hotel, Cagayan de Oro on March 27-29, 2014 which was attended by more than 600 delegates: PEEs, REEs, RMEs and EE students from the IIEE Northern Mindanao Chapter. Product exhibits, technical sessions and technical presentations have been conducted during the three-day event. A total of 23 topics and presentations have been lectured by distinguished speakers. The conference was hosted by IIEE-Iligan Bay and IIEE-Cagayan De Oro Chapters.

The Electrical Engineer 1st Quarter 2014

11


COVER STORY

The extent of Philippine Electrical Engineers’ eligibility to be listed in the ASEAN Chartered Professional Engineers Register (ACPER): Basis for a Road Map Model Florigo C. Varona, P.E.E., Ph.D.

This research was conducted to determine the extent of Philippine Electrical Engineers’ eligibility to be listed in the ASEAN Chartered Professional Engineers Register (ACPER): Basis for a roadmap model. Specifically, this study sought answers to the following questions: 1. What is the profile of the electrical engineer respondents in terms of: (a) age; (b) gender; (c) educational attainment; (d) professional license; (e) years of experience as an electrical engineer; (f) job position; (g) field of specialty; (h) number of specialization; (i) work groups; and (j) stakeholder group? 2. How do the electrical engineer respondents assess the ACPER eligibility criteria in terms of: (a) a holder of engineering degree in an institute accredited by CHED; (b) a holder of valid license and professional certificate of registration; (c) an active and bona fide member of professional organization (included since RA7920 requires it for renewal of PRC License); (d) with experience of seven (7) years active practice; (e) able to gain at least two (2) years responsible charge of engineering work; and (f) able to undertake the total number of weighted CPE hours required? 3. How significant is the relationship in the assessment of the electrical engineer respondents

12

with regard to the ACPER criteria enumerated in problem no.2 when grouped according to their profile variables? 4. What is the level of preparedness of the electrical engineer respondents with regard to the ACPER criteria enumerated in problem no.2? 5. How significant is the relationship between the qualifications of the electrical engineer respondents to the ACPER criteria enumerated in problem no.2? 6. What are the problems encountered by the electrical engineer respondents in relation to the eligibility required in order to be listed in the ACPER? 7. What Road Map Model can be proposed to enhance the eligibility and have significant number of Philippine electrical engineers listed in the ACPER? In order to achieve the purpose of the study, the descriptive-normative survey method of research was utilized. The convenience sampling procedure was used in determining the 267 respondents. In cooperation with IIEE ACPER Committee and Membership Department, research questionnaires and membership profile form were utilized to draw out the assessments of the respondents. The IIEE Membership Online Registration and eCard (MORE) system database were utilized for gathering the muchneeded data. The research was conducted from May 24, 2013 up to September 20, 2013 during regional conferences.

The Electrical Engineer 1st Quarter 2014


COVER STORY

The following were significant findings: (a) Personal profile of the respondents – (a.1) 91% were above 27 years old; (a.2) Only 3.75% were female; (a.3) 94.38% were either BSEE, Masters, or Doctorate degree holders; (a.4) 87.26% were either REE or PEE license holders; (a.5) 53.18% with more than 6 years experience; (a.6) Only 33.71% were either supervisors, managers, or contractors; (a.7) 73% were either in the field of maintenance, operation, construction, or design while 27% were either in the field of project management, electrical appraisal, education, research and development, consultancy, or sales; (a.8) 92% have either 1, 2, or 3 specializations while 8% have more than 3 specializations; (a.9) 79% were working in the government; (a.10) 85% came from either regulators/planners, end-user, distribution, or supply sector while 15% came from either academe, transmission, or generation sector; (b) Assessment of the ACPER eligibility criteria – 88%, 91%, 88%, 87%, 86%, and 79% favorably responded to criteria 1, 2, 3, 4, 5, and 6 respectively; (c) Relationship in the assessment of ACPER criteria, when grouped by profile of the respondents, using chi-square analysis, (c.1) criteria 1 –there is a significant relationship when grouped according to educational attainment, professional license, job position, and number of specialization, however, further analysis using Cramer’s V formula resulted in a correlation value of 0.29 (low), 0.30 (low), 0.19 (negligible), and 0.17 (negligible) respectively; (c.2) criteria 2, 3, and 6 –there is no significant relationship; (c.3) criteria 4 –there is a significant relationship when grouped according to age range, years of experience as electrical engineer, and work group, however, further analysis using Cramer’s V formula resulted in a correlation value of 0.22 (low), 0.19 (negligible), and 0.17 (negligible) respectively; (c.4) criteria 5 –there is a significant relationship when grouped according to professional license, and work group, however, further analysis using Cramer’s V formula resulted in a correlation value of 0.18 (negligible), and 0.20 (negligible) respectively;

(d) The level of preparedness were 94%, 87%, 93%, 53%, 34%, and 40% with regard to the ACPER criteria 1, 2, 3, 4, 5, and 6 respectively. However, only 9% of the respondents were able to pass the entire ACPER criteria; (e) There is a significant relationship between the qualifications of the respondents to the ACPER criteria; (f) The following respondents failed in either ACPER eligibility criteria 4, 5, or 6: (f.1) 10 out of 10 female respondents; (f.2) 2 out of 2 doctorate degree holders; (f.3) 14 out of 14 PEE license holders; (f.4) 7 out of 7 contractor respondents; (f.5) 50 out of 53 government employee respondents; In order to enhance the eligibility of the respondents and the Philippine Electrical Engineer here and abroad, a road map model is proposed focusing on the following: a) Establishment of OASIS (Online ACPER Satellite Information System) to document and track qualifications and global mobility of electrical engineers, thereby addressing the discrepancies in ACPER criteria 4, 5, and 6; b) Online IEC (Information, Education, and Communication) campaign in order to encourage the electrical engineers in the Philippines, as well as in the ASEAN and APEC region to apply for ACPER, thus, expand the market share in the economic community and enhance the global competitiveness of the Filipino professionals; c) Implementation of global, national, and regional CPD (Continuing Professional Development) to address ACPER criteria 6; d) Institutionalizing CTD (Career Tracking and Development) of electrical engineers to address ACPER criteria 5; e) Instill global competitiveness to the young engineers by facilitating early preparations for the entire ACPER criteria.

The Electrical Engineer 1st Quarter 2014

13


In Memoriam of The Institute of the Integrated Electrical Engineers of the Philippines, Inc. would like to pay tribute to the late members who have contributed their knowledge and skills to the Institute and to the engineering industry.

Engr. Jesus C. Santos A Professional Electrical Engineer, and a Designer & Consultant, Engr. Jesus C. Santos was the President of the ScS Industrial Corporation. An active member of the Institute of Integrated Electrical Engineers of the Philippines, Inc. (IIEE), he handled committees including: Chairman of the Technical Information Committee; Vice Chairman of the Philippine Electrical Code-Part-1 Committee and; Vice Chairman of the Standards Committee. He was also a Former President of the Society of Philippine Electrical Contractors & Suppliers (SPECS). He was also the author of the book, Manual for LEED Compliant Lighting System Design. His legacy was the 400 Volts System. Engr. Santos conducted on-site seminars on the Institute and during conferences and conventions.



TECHNICAL FEATURE

16

The Electrical Engineer 1st Quarter 2014


TECHNICAL FEATURE

The Electrical Engineer 1st Quarter 2014

17


TECHNICAL FEATURE

18

The Electrical Engineer 1st Quarter 2014


TECHNICAL FEATURE

The Electrical Engineer 1st Quarter 2014

19


TECHNICAL FEATURE

20

The Electrical Engineer 1st Quarter 2014


TECHNICAL FEATURE

The Electrical Engineer 1st Quarter 2014

21


Trainings and Seminars

IIEE will conduct the following on-site trainings and seminars for 2014:

July 11 and 12

Electrical Grounding and Bonding Hon. Jaime V. Mendoza

July 18 and 19

Electrical Power System Design & Operation for Contestable Customers under Open Access

Engr. Florigo C. Varona

August 8 and 9

Project Estimating and Costing (2)

Engr. Florigo C. Varona

September 5 and 6

Advance Instrumentation Engineering

Engr. Marvin Philip Joven Engr. Gamaliel F. Itao

October 24 and 25

Construction Management

Engr. Florigo C. Varona

December 5 and 6 Power Quality

Engr. Marvin Bathan

NOTE: Schedule may change without prior notice. Kindly confirm schedule at the IIEE Secretariat at least one (1) week before the actual date of the seminar. Registration: * Registration is on-going on a first come first serve basis at the IIEE National Office, 41 Monte de Piedad St., Cubao Quezon City. For more information, please contact IIEE at tel nos. 727-3552, 4145626 loc 107; fax no. 410-1899; and e-mail address at trainings@iiee.org.ph * To cancel, you must inform us through letter addressed to the Chairman, Continuing Education Committee of the Institute of Integrated Electrcal Engineers of the Philippines, Inc. (IIEE) at least one week before the first day of the program. * Payments can be transferred to a particular seminar provided that the IIEE is advised at least two weeks before the seminar. Seminar Rates: Discounted Rate : Php2,550.00 Member Rate: Php 2,850.00 Non-Member Rate: Php 4,350.00

You may deposit payment at the following IIEE savings account: Metrobank 3-05651373-7 or 3-05650852-0 BDO 10167161 Allied Bank 3381-00120-3 Registration Fee Covers: Seminar Handout, Certificate of Participation, Lunch,AM and PM snacks. Venue: The program will be conducted at the 3rd Floor IIEE Office, #41 Monte de Piedad St., Cubao, Quezon City. Suggested Attire: Casual attire is appropriate. Please be prepared for a moderate temperature inside the seminar room.

Discounted rates maybe availed if payment is received at least two (2) weeks before the schedule of the the technical Seminar.

For an updated list of trainings and seminars, visit http://iiee.org.ph/trainings-and-seminars/

22

The Electrical Engineer 1st Quarter 2014


The Electrical Engineer 1st Quarter 2014

23



Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.