2
BACKGROUND OF DEVELOPMENT Conventional Chemical Antimicrobial: o Toxic to human & nature o Sensitive Results on Body o Many negative effects
o Limited Application Cannot produce safe & high-end products. Requirement of revolutionary antimicrobial !!
Conventional Natural Antimicrobial: o Weaker effect on microbial o Poor durability to washing o Limited application o Higher Cost
SaniTtal G‌ Series 100% Natural Antimicrobial: free from other chemicals Wide application: suitable for most of substrates Excellent effect even after frequent washing The safest to human body and nature Maximum satisfaction & efficiency The best choice for top quality 100% Eco-friendly!!
Revolutionary!!
3
WHY WEAR CHEMICALS? Chemical-based Antimicrobial: Many people use chemical-based antimicrobial to eliminate microbial. But why wear chemicals? They bring negative effects on human body. What’s the use of such antimicrobials if they are not safe to our body?
Why use less-effective & non-durable antimicrobial? Other Natural Antimicrobial Conventional natural antimicrobial show much weaker & limited effects. They are not 100% natural (contains chemical additive, binder etc.) Their treated effects are non-durable under frequent laundering. Particulars Safety to human body (skin, oral, breathing etc. Skin sensitivity Mutagenic problem Application field Effect on many microbial (bacteria, fungi etc. Antimicrobial effect Deodorant effect Anti-oxidation effect Durability to laundering Cost economy vs. effect Bio-degradability Eco-friendly
Other chemical Antimicrobial Not safe, hazardous, some are even toxic Sensitive Brings mutation
SaniTtal G.. The safest to all; superior safety Not sensitive No mutation
Limited Generally good
Too many Excellent
Generally good Depends on No Generally good Generally good but hazardous Poor No
Excellent Very good Excellent Very good Good & perfectly safe 100% degradable 100% safe
Other natural Antimicrobial Not that safe if it contain chemicals Some sensitive Brings mutation if contain chemicals Limited Limited Weak Very weak Weak Poor Costly Generally good Generally, yes
SaniTtal G‌ series
SaniTtal G-01
:
For all textile goods, papers & some hygienic products
SaniTtal G-400
:
400% form, for textile, ink & other hygienic products
SaniTtal G-EX
:
Extract, for premium detergent, cosmetic goods etc.
4
BIO-ELIMINATION RATIO OF SaniTtal G-01, G-400, G-EX Microbial (Bacteria, fungi etc.) Staphylococcous aureus (ATCC 6538) MRSA, ATCC 33592 (Methicillin-resistant S. aureus Escherichia coli (ATCC 25922) O-157 (Escherichia coli ATCC 43895) Salmonella typhimurium Klebsiella pnemoniae (ATCC 4352) Pseudomonas aeruginosa (ATCC 27853) Bacillus subtilis (ATCC 6633) Enterobacter cloaceae (ATCC 11438) Candida albicans (ATCC 14053)
Shigella flexneri (ATCC 9199) Trichophyton rubrum (ATCC 28188) *
Cellulosics, cellulosics blends Other substrates
Main Symptoms Bacterial food poisoning : impetigo etc. Amoebic colitis, shock Bacterial food poisoning Hemorrhagic diarrhoea etc. Bacterial food poisoning Bronchopneumonia Dermatitis, tissue infections, sepsis etc. Conjunctivitis, iritis etc. Bacterial food poisoning Fungus; trouble/disease to skin, genital &oral oragans, diaper rash, candidasis etc. Dysentery etc Athlete’s foot, rash
*Bioelimination 99.9% 99.9% 99.9% 99.9% 99.9% 99.9% 99.9% 99.9% 99.9% 99.9%
99.9% 99.9%
: effect after 20 times laundering : effect after 10 times laundering
Bio-elimination : Biostatic reduction ratio o By AATCC 30, AATCC 147, AATCC 100, ASTM G-21 etc. Material: on cellulosic goods (Cotton, Rayon etc.), with 40 g/l of SaniTtal G-01 o Exception : Klebsiella pneumoniae = 70 g/l, Trichophyton rubrum = 90 g/l o On other substrates, higher quantity of SaniTtal G-01 gives the similar effect Main Symptoms : o We mentioned main symptoms only. Each bacteria, fungus above bring forth more kinds of symptoms & disease. Effect on other microbial, microoganism ect.: o Dust mites: 90 g/l of SaniTtal G-01 on Dermatophagoides farinae, Dermatophagoides pteronyssinus. Avoidance rate = approx. 90% (after 50 times washing)
Here we have mentioned the effect on the most widely-known microbial only. However, SaniTtal G‌. series are very effective in eliminating many other bacteria, fungi etc.
5
DUSTMITES
ARE YOU SLEEPING WITH THE ENEMY? If you or anyone in your family identifies with any of the following allergy related maladies such as Asthma, Eczema, Hay Fever, Bronchitus, Inflammation of the Mucous Membranes, Itchy Red Eyes, Headaches, Sinus Pain, Fatigue, early morning fits of excessive Sneezing, even a feeling of Depression when you wake up, you may well be sleeping with the enemy.
Who is this enemy? It is called a dust mite and we'll spare you trying to remember or even pronounce the scientific name.
6
What Are Dust Mites? Dust mites are tiny animals you cannot see. Mites are members of the eight legged- Arachnid family and are distantly related to spiders, fleas and ticks. Like the germs on your door knob, they can’t be seen without a microscope. They thrive in warm, humid conditions. They’re hardy, surviving and multiplying best when the relative humidity is at 75-80% and the temperatures is around 25º. Mites cannot survive when humidity falls below 4050%. They are very rare in dry, high altitude areas. Because they feed on skin scales, they love bedding, carpeting, upholstered furniture, clothing, cupboards, stuffed toys and car upholstery. Every home has dust mites. They survive vacuuming because they burrow deep in carpet fibres and are equipped with sucking sticking pads on the ends of their legs. They don’t bite of transmit diseases – they are harmful only to people who become allergic to them. People become allergic to proteins in mites and mite feces. The fecal pellets are so tiny and light that they float easily into the air when carpet is walked upon or bedding is shaken, or when the vacuum cleaner is run. Exposure to dust mite allergen can cause asthma in susceptible children.
Facts: We shed 10,000 million scales of bacteria laden skin each day, most end up in our mattresses. Dust mites produce 200 times it’s body weight in excrement during their normal life span. Dust mites feast for up to 170 days on our shed skin. Dust mites spread rapidly. A female dust mite lays 300 eggs. They can live without food for up to a year.
7
Dust Mite Prevention: If you suffer from mite-induced asthma, reducing the number of mites and level of mite faeces, and therefore allergen in the house can make an immeasurable improvement to your quality of life. By reducing the allergen levels in the home (either directly or by removing the dust mites) the trigger that starts inflammation, which leads to the asthma attack are also removed. In reality effective removal takes time, but the likelihood of an asthma attack being provoked decreases. However, there may be no noticeable improvement in health for several months, so do not assume that the changes are ineffective because the asthma does not disappear overnight. Several simple measures can do this:
Actions You Can Take Wash bedding (such as sheets, bedcovers, and blankets) once a week in hot water. Choose washable stuffed toys, wash them often in hot water, and dry thoroughly. Keep stuffed toys off beds. Cover mattresses and pillows in dust-proof (allergen-impermeable) zippered covers. Maintain low indoor humidity ideally between 30-50% relative humidity. Humidity levels can be measured by hygrometers which are available at local hardware stores. Dust Mites cannot stand hot water and the allergens are very water soluble. Washing pillows is also advisable, but this would require synthetic pillows. If hot washing is not possible, 24 hours in the freezer will kill all the dust mites in a pillow. This will not remove the allergens, so should be followed by a cold wash.
The ultimate solution to prevent dustmite is “SaniTtal�
8
SaniTtal G-01 Anti-bacteria & antimicrobial aftercare
Properties: Appearance Chemical nature Ionic nature pH (1% soln) Solubility
: : : : :
Field of application : Substrate : Aggregate Operation Compatibility
: : :
Influence on handle : Influence on shade :
Absorbency Biodegradation
: :
Yellow to brownish opaque liquid Natural organic emulsion Nonionic 6.9 Âą 0.5 Easily soluble at cold or warm water
Goods of most of natural & synthetic fibres, especially cellulosics Padding, spray, exhaust machine High-graded and elegant finishing Highly compatible with almost all finishing agents & additives Gives softener handle on the treated goods Doesn’t normally impair the shade of treated goods. However, applying higher quantity can bring forth alight yellowing Provides better absorbency 100% bio-degradable
Features: 100% natural Antimicrobial: o It is completely free from other chemicals. So it is safer than any other existing antimicrobial in the world. Wonderful antimicrobial effect: o Shows excellent antimicrobial effect. It stops microbial & fungal growth. SaniTtal G-01 shows strong antimicrobial effect on many kinds of bacteria, fungi & many harmful viruses. Maintain hygienic freshness: o Prevent microbial staining & deterioration of the product: Eliminates broad spectrum of bacteria & many kinds of microorganisms. Prevents microbial staining by efficient blocking of microbial & fungal growth. Thus it maintains hygienic freshness & prevents the deterioration of the product.
9 Excellent dust-mite repellent: o Is very effective in repelling & inhibiting the growth of dust-mites that feeds on human skins and bring about allergy, asthma & other negative effects. ** Avoidance rate: approx. 90% (under frequent laundering) Deodorant effect: o Conventional chemical-based deodorants shows negative effect to our body if inhaled. Other perfume-based deodorant brings negative odor as the treated goods wet by perspiration etc. o Is an effective deodorant : i.e. 70% deodorant effect at 40 g/l on cellulosics o Eliminates unpleasant odors by blocking microbial & fungal growth. o If applying higher quantity (i.e. more than 70 g/l), it shows deodorant effect. o Keeps excellent deodorant effect even after frequent laundering. Excellent anti-oxidation & ideal skin care: o Is an ideal skin-care solution. o Shows powerful anti-oxidation effect owing to its premium ingredients; so it protects skin from the ageing & other negative effects. Utmost safe to human body: o Other chemical-based antimicrobial are sensitive to human body (skin etc.); some are even toxic. And most of other natural antimicrobial are not perfectly safe to human body as they contain chemical additives such as binder etc. o SaniTtal G-01 is different !! Being a 100% natural antimicrobial o Is non-allergenic, non-toxic, non-irritant and non-sensitive to human body Mutation Problem: o Chemical-based antimicrobial brings mutation problem at next generation. o And other so-called natural antimicrobials that contains chemicals (chitosan etc.) brings mutation. o SaniTtal G-01 is free from mutation problem o SaniTtal G-01 is the safest antimicrobial that have ever developed in the world. High durability to frequent laundering: o Almost all other natural antimicrobial that show poor effect under frequent laundering. o Their antimicrobial effect is almost exhausted only after a few times washing. o However, SaniTtal G-01 provides semi-permanent antimicrobial effect. o SaniTtal G-01 still keeps excellent effect even after frequent laundering. o Its effect is superior to all other natural antimicrobial in the world. Suitable for almost all application: o As SaniTtal G-01 is perfectly safe to human body, it is suitable for almost all application including sensitive textiles goods (baby & children wear, mask, hospital goods, underwear, lingerie, hosiery etc.) as well as all other textile goods covering sportswear, protective workwear, towel, disposable wipes, carpet, home furnishing and other sanitary & well-being articles.
10 100% Eco-friendly, the real “LOHAS” product: o Being a vegetable extract, SaniTtal G-01 is completely bio-degradable. o So it is perfectly safe to eco-system & it fully meets Oekotex standard requirements. o Is the real & most ideal ”LOHAS” product. Well-being & revolutionary !! o SaniTtal G-01 is the real “well-being” antimicrobial that is free from chemicals. o SaniTtal G-01 is a world only one & revolutionary antmicrobial.
Application: Textile Goods: SaniTtal G-01 provides wonderful effect in all textile applications including followings: o All wears: underwear, outwear, sportswear, apparels o Baby & children clothing, protective workwear (military, laboratory, hospital etc.) o Hospital
&
medical
goods:
linen,
gauze
sponge,
bandage,
wear
for
patient/doctor/nurse etc. o Hosiery (socks, panty hose), lingerie o Mask (general mouthwear & surgical Mask). o Towels (terry towel, sports towel etc.) o Blanket, bedding (bed sheet, bed spread, mattress etc.), sleeping bag o Disposal wipes for cosmetic grade (cleaning pad/wipes/ball etc.) o Tablecloth, sanitary napkin for restaurant. Other disposable wipes o Carpet & special rug, other home furnishing (curtain, sofa etc.) o All other “well-being” articles & sanitary textile goods Other Hygienic Goods: SaniTtal G-01, SaniTtal G-400 are very suitable for wide range of other hygienic products that require 100% safe antimicrobial aftercare. o Disposable kitchen towel (SaniTtal kitchen towel) & other disposable wipes o Diaper, hygienic band & other sanitary tissues. Special ink & paper o Cosmetic tissues e.g. Kleenex (both dry and wet type) o Raw material for shampoo, premium detergent (for lingerie etc.) o Skin & body care products. Many other hygienic products
11
TEXTILE GOODS Dilution: Being a 100% natural product, SaniTtal G-01 settle down during storage. So it is requested to shake the container before opening the lid or stir it briefly before use. Then put SaniTtal G-01 directly into bath. Applying Quantity & Condition: The application quantity largely depends on the various factors including fabrics applied, type of machine, type of processes, working condition etc. However, following quantity of SaniTtal G-01 is suitable in general:
Padding General Finish: On 100% cellulosic goods 40~50 g/l On blends with cellulosics 50~70 g/l On other substrates * 60~80 g/L Special Finish (for superior effect): On all substrates** 80~100 g/l PH pH 4~9 (best=5~7) Pick-up 80% above Immersion time ----Drying temperature 120 ~ 200ºC Drying time 3 min.~30 sec.
Exhaust 4.5~6.0% (o.w.f.) 6.0~7.5% (o.w.f.) 6.0~9.0% (o.w.f.) 7.0~12.0% (o.w.f.) pH 4~9 (best=5~7) 50~80ºC x 15~20 min. Above 100ºC As usual
SaniTtal G-01 shows the best and maximum effect on 100% cellulosic goods. It shows 2nd best effect on blends with cellulosic goods (PES/CEL, PA/Co etc.). The 3rd best effect is expected on acetate and fine micro fibre Other substrates*: o If applying higher quantity, SaniTtal G-01 also shows good effect on other substrates such as acetate, polyester, polyamide, wool, silk, acryl goods etc. Microfibre (PES,PA.): o Very good effect on the goods of fine microfibre (less than 0.1 denier). o The finer the constitution of substrates, the better effect can be obtained. Thickness of substrate: o Good effect on the substrate with general thickness or thick fabrics. On very thin fabrics, applying quantity should be increased by 15~20% (against the quantity shown in “general finish”). Maximum applicable quantity**: o If applying maximum quantity (on pale shades =max. upto 80 g/l or 8%, on other colors = up to 100 g/l or 12%), SaniTtal G-01 shows maximum antimicrobial + deodorant + dustmite – repellent + anti-oxidation effect + many other good effects.
12
NOTE AND PRECAUTION Applying at padding process is much better in effect & more economical than exhaust. Pick-up above 80% is very important- from the beginning till the end of padding system. o The higher the pick-up ratio (up to 100%), the better antimicrobial effect is expected. If the pick-up ratio is less than 80%, it brings less antimicrobial & deodorant effect. If the pick-up ratio is less than 80%, they are requested to reduce the stenter speed to provide sufficient pick-up and the applying quantity of SaniTtal G-01 should be increased proportionately (maximum, as the quantity given in “special finish” above.) Sufficient dehydration is necessary before SaniTtal G-01 finish. o The drier the substrates, the better SaniTtal G-01 finish can be obtained. o If the equipment to apply do not allow sufficient dehydration (e.g. file goods, terry towel.), o The applying quantity of SaniTtal G-01 should be increased by 1.5~2 times higher. In exhaust process, sufficient immersion time & drying (above 100ºC) is required. o The longer the immersion time, the better SaniTtal G finish is expected o E.g. 50~80ºC x 15~20 min If other finishing agents & additive are to be put into bath at the same time, o Please firstly put those additives & auxiliaries before adding SaniTtal G Excellent compatibility with other finishing agents: o SaniTtal G-01 shows excellent compatibility with almost all additive and finishing agents. o **Exception : some very strong cationic products that are in unstable formulation may be less compatible; pretrial is advisable in that case. SaniTtal G-01 can bring about slight yellowing if applying higher quantity: o On very white goods generally : not above 40 g/l; o use with 2~3 g/l of SaniTtal S-10L if there’s no significant yellowing, try to use maximum quantity. Also try to select other FWAs (in different shades) to apply more quantity o on pale shaded good: do not use it more than 80 g/l. High durability to laundering: o SaniTtal G-01 forms very effective antimicrobial film after thermo-fixation. This film is highly resistant under frequent laundering. Based on quantity by “General Finish” 100% Cellulosics: above 90% (up to 99%) effect after 20 times washing Cellulosic blends (where cellulosics part is higher): above 90% effect after 20 times washing Cellulosic blends (where cellulosic part is less): above 90% effect after 15 times washing Other substrates : above 90% effect after 10 times washing
13 Additive - SaniTtal S-10L: o For the goods of non-cellulosic fibre especially when ideal antimicrobial effect at more than 20 times washing is required, use with 2.0~3.0 g/l of SaniTtal S-10L. o If SaniTtal S-10L is used at the same time, set pH 5~7 (optimum = pH 7) Example - on 100% cellulosic goods: After dyeing & sufficient dehydration (80~100% is recommended for maximum pick-up, do not pre-set the material for its dehydration as it will bring less effective finish) Put into SaniTtal G-01 at room temperature, and then x g/l 40~80 g/l pH
other resins & agents if required SaniTtal G-01 5~7
Padding 1 dip - 1 nip
Pick-up 80% above
Pre-drying 100ยบC x 3min
Curing 150~160ยบC x 90~120 sec.
The bath temperature should be under 35ยบC. Thermal stability: SaniTtal G-01 is stable up to 200ยบC. If pre-drying & curing unit is not possible, simple drying at 120~200ยบC at 3 min.~30 sec. also gives good result. Biostatic reduction ratio: 99.9% even after 20 times laundry washing
All outwear & Underwear SaniTtal G-01 is suitable for all outwears & under wears including following: o Underwear, baby & children clothing, sportswear, lingerie, all outwear o Protective work wear (military, laboratory, hospital etc.) Underwear & Outwears SaniTtal G-01 gives wonderful antimicrobial effect as well as maximum absorbency. It also eliminates unpleasant odors & provides powerful anti-oxidation effect. Baby & children wear SaniTtal G-01 is the safest antimicrobial. It is non-toxic, non sensitive to human body. It is free from any chemicals. Protect them from choronic skin troubles (Atopi etc.) Protective work wear (military, laboratory, hospital etc.) Military wear: they got easily hurt during their operation & drill. SaniTtal G-01 is the safest way to protect them from microbial attack. Hospital & Medical Goods Wear for patient /doctor/nurse etc. surgical wear (mask, gown etc.), Linen for bedding, gauze sponge, bandage & all other textile material All products treated by SaniTtal G-01 are non-toxic, non-irritant, non-allergenic. Surgical mask, gauze sponge, bandage are the most important items because such items should be protected from microbial attack and should be free from chemical- based antimicrobial, FWA etc.
14 Surgical mask: The ideal surgical mask should be completely free from chemicals such as bleaching agent, FWA, dyestuffs, chemical-based antimicrobial etc. to protect the people from breathing chemicals. o Ideal substrates: cellulosics goods (cotton, rayon, Tencell etc.) o Treatment : pretreat the goods without any chemicals then finish with 4.0~6.0% o.w.f. of SaniTtal G-01 Socks & Hosiery: For general antimicrobial + mild deodorant effect: 4.5~6.0% o.w.f. SaniTtal G-01 For superior antimicrobial + excellent deodorant effect + preventing athlet’s foot: 7.0~9.0% o.w.f. (maximum effect at up to 10%) of SaniTtal G-01 SaniTtal G-01 prevents athlete’s foot by blocking the growth Trichophyton rubrum ATCC 28188 SaniTtal G-01 shows better effect than other antimicrobial in preventing athlet’s foot. It also shows the perfect antimicrobial effect at most-widely known microbial listed in this literature. It is perfectly safe to human skin. Fibre dyeing of socks-Hank or cheese machine: After dyeing washing and drain put SaniTtal G-01 and other agents. Then treat it under 50~80ºC x 15~20 min. drying (above 100ºC, time : as usual) rewinding Finish for knitted socks: After dyeing & sufficient dehydration, o Put SaniTtal G-01 & treat it under 50~80ºC x 15~20 min. o Pre-drying (above 100ºC, temp. x time = as usual) dry-setting Test condition: Culture Trichophyton rubrum ATCC 28188 – for 21 days under. Temperature: 28~35ºC Humidity : 85% and test it on Material: socks treated by 8.0% of SaniTtal G-01 Test results: Grade 0 (no growth of bacteria), ASTM G 21-1996 (AATCC TM 30) Bedding (bed sheet, bed spreads, mattress) In addition to its wonderful antimicrobial effects on countless microbial, SaniTtal G-01 also provides powerful repellent effect on dust-mite. o Ideal substrates: cellulosic goods, cellulose/synthetic blends, microfibre etc. o Treatment and applying quantity : as usual Test condition for dust-mite: Culture Dermatophagoides farinae, Dermatophagoides pteronyssinus – for 48 hours under. Temperature: 21~25ºC Humidity: 50% 30,000 dust-mite/gm and test it on. Material: cellulosic goods treated by 90 g/l of SaniTtal G-01 Washing condition: normal cycle, 40 ± 3ºC, line dry, 50 times wash Test result: avoidance rate = approx. 90% (after 50 times washing)
15 ** To check maximum avoidance rate at maximum washing (50 times), we applied excessive quantity of SaniTtal G-01 in this test. For normal effect (i.e. 20 times washing), general applying quantity will be sufficient. Towel (terry towel, sports towel etc.) SantiTtal G-01 is the safest to human body and gives maximum absorbency. It also reduces and minimizes unpleasant odors from microbial/fungal growth. o Idea substrates : Cellulosic goods, microfibre o Treatment : as usual Carpet and special rugs The carpets and special rugs (e.g. Persian rug) made of wool, acryl are especially suitable. Both padding and spray method is suitable. Spray method can be more economical. On very thick material, co-use with SantiTtal G-01 & SantiTtal S-10L brings better result. If oil-based chemical (e.g. in back-coating) is to be applied at the same time, SantiTtal G-01 is not compatible. SantiTtal S-10L is more suitable. If the carpet and rug is made polypropylene or synthetic yarn Applying SantiTtal SM- series (antimicrobial masterbatch additive) is more suitable. Other Textile Goods: Disposable wipes for cosmetic grade (cleaning pad/wipes/ball etc.) Table cloth, sanitary napkin for restaurant. Other disposable wipes All other “well-being� articles and sanitary textile goods.
SantiTtal G-EX is suitable for: Raw material for cosmetics and special soap (cosmetic grade) Raw material for other special products Skin & body care products Owing to its excellent antimicrobial + deodarant + anti-oxidation + skin protection effects, SantiTtal G-400 itself can be used as an excellent skin and body care application as under: o Excellent antimicrobial & deodorant effect; eliminates harmful bacteria and fungi on skin o Anti-oxidation and skin protection effect: remove harmful substances which cause ageing o Thus used as skin and body care products (for face, hands, hair, feet, body) o During washing, cleansing, shower, massage, bath etc. Disposable Kitchen Towel (SaniTtal kitchen towel) SaniTtal G-400 can product premium disposable wipes and towel. SaniTtal kitchen Towel/ SaniTtal Multi-use wipe: Eliminates major food bacteria and many other microbial Stops unpleasant odors from bacteria and fungal growth Chemical free; the perfect safety to human body Maximum absorbency, no need to sterlize, easy to use.
16 Diaper, Hygienic band etc. The ideal antimicrobial should have following properties: o Free from any chemicals (for that it can be safe to human body) o No skin sensitization, non-negative influence on genital organs o Excellent elimination of Candidasis (from candida albicans etc.) o Reduce unpleasant odors and keep freshness of the products. o SantiTtal-G-01 is the only antimicrobial that can meet all such important conditions. o So, SantiTtal G-01 can produce premium diaper and hygienic band.
Cosmetic Tissues (both dry and wet type) Conventional wet tissues contain chemicals (alcohol etc.) that may bring skin senstization. Conventional dry tissues contain chemicals or cannot control microbial growth. SantiTtal G-01 can produce ideal cosmetic tissue. If such tissue is not available, using SantiTtal Multi-use wipe under wet condition is the safest way to cleanse your skin.
Special soap, Detergent and Cosmetics SantiTtal G-400, SantiTtal G-EX are suitable for: o Raw material for shampoo, premium detergent (for lingerie etc.) o Raw material for cosmetics and premium soap (cosmetic grade)
17
SaniTtal G-400 Anti-bacteria and antimicrobial aftercare Description: Concentrated form (400% form) of SantiTtal G-01 100% natural component Higher economy: designed for diluters and dealers Can be applied directly as well (without dilution) Properties: Appearance Chemical nature Ionic nature pH (1% soln) Solubility Field of application Substrate
: : : : : : :
Aggregate Operation Influence on handle Biodegradation Storage stability
: : : : :
Storage condition
:
Shipping
:
Brownish or bluish*1 opaque liquid Vegetable organic extract Nonionic 6.8 ± 0.5 Easily soluble at cold or warm water goods of most of natural & synthetic fibres, especially cellulosics padding, spray, exhaust machine high-graded and elegant finishing Gives softener handle on the treated goods 100% bio-degradable 6 months at 5 ~ 300C *2 under sealed containers & proper condition. The product may settle down under prolonged storage. But if can be used again after simple stirring. Please store it under cool place without direct sunlight. Non-red lable. Non-hazardous material
*1 Being a natural component, the color of the product can be different from brownish to bluish. *2 Storing at high temperatures (above 35º) can shorten the storage life of the product. Ideal storage temperatures = 5 ~ 15ºC, but avoid freezing) Dilution For producing 1000 ml of SaniTtal G-01: SaniTtal G-400 250 ml Dimineralized water (at room temp.) 750 ml Mix the above under slow stirring till fine solution Application: Refer literature of SaniTtal G-01. You can use the above diluted form or you can directly apply ¼ quantity of SaniTtal G-400 without dilution.