Bosch Drilling & Fastening Catalogue [2018/2019] by Build It Wellington

DRILLING AND FASTENING

CORDED DRILLS

DRILLS AND DRILL/MIXER

3/8" CORDED DRILL 1006VSR

ERGONOMIC

DOUBLE INSULATION

ff One-Handed Keyless Chuck — For quick, easy and secure accessory changes ff Excellent Power-to-Weight Ratio — Maximum power at minimum weight ff Ergonomic Handle with Soft Grip — For increased comfort ff Two-Finger Trigger with Lock-On — For ease of operation

5/8" MIXER GBM9-16

VARIABLE SPEED

SPECIFICATIONS RATING AMPERAGE NO LOAD RPM TORQUE CHUCK LENGTH WEIGHT

120V 6.3 0–2,600 177 in.-lbs. 3/8" 10.1" 3.4 lbs.

SPECIFICATIONS RATING AMPERAGE NO LOAD RPM CHUCK SIZE STIRRER CAPACITY WEIGHT

120V 9.0 0–700 5/8" 5/8" 6.6 lbs.

DOUBLE INSULATION

ff Variable-speed Motor — Provides hightorque power to match speed to mixing application ff Powerful 9.0-Amp Motor — Generates outstanding torque for mixing materials such as cement plaster and epoxy resin ff Rotatable 360° D-Handle Design — Allows user to hold the mixer in the best position ff Heavy-duty Keyed Chuck — Supports a wide variety of accessories ff Variable-speed and Reversing Switch — For greater user control INCLUDES Auxiliary Handle 1619PA7850 Chuck Key 2610348635

146

BOSCHTOOLS.COM 877-BOSCH-99

2018/2019 POWER TOOLS & ACCESSORIES CATALOG

WOOD DRILLING ACCESSORIES WOOD DRILLING SELECTION GUIDE

DAREDEVIL® SPADE BITS

Fast drilling in wood

DAREDEVIL® HIGH-SPEED AUGER BITS

Fast drilling in wood and wood with nails

DAREDEVIL® AUGER BITS

Heavy-duty drilling in thick wood with nails

SELF-FEED BITS

Fast, large diameter rough-in for electrical and plumbing

BELLHANGER BITS

Low-voltage wiring installation. Use flute hole for wire pulling

BRAD POINT BITS

Precise, small diameter hole making

FORSTNER BITS

Precise flat-bottom holes

HINGE BORING BITS

Precise, flat bottom holes in hard wood

SCREW PILOT BITS

Precise, small diameter holes with counterside

= Recommended = Acceptable = Not Recommended

SPEED

HOLE QUALITY

DURABILITY (HITS NAILS)

WOOD DRILLING ACCESSORIES

APPLICATION

DRILLING AND FASTENING

BIT TYPE

147

WOOD DRILLING ACCESSORIES

DRILLING AND FASTENING

DARE TO BE…BEST IN CLASS Bosch Daredevil® power tool accessories are designed to answer the needs of electricians, plumbers and other professional tradesmen. Based on independent testing, Bosch ensures that each Daredevil accessory is market best in speed, ease of use and durability — or it’s not a Daredevil. The key to this best-in-class performance is found in a commitment to use premium materials and incorporate patented designs and advanced engineering. No power tool accessory manufacturer does more to ensure users experience the benefit of a superior power tool accessory: ff Saving up to 30-minutes a day on the job ff Better finish quality on every task ff Maximum sharpness for tips and cutting surfaces Bosch Daredevil is dedicated to saving time and money. Dare to put improved accessory performance in your tool box with Daredevil.

148

BOSCHTOOLS.COM 877-BOSCH-99

2018/2019 POWER TOOLS & ACCESSORIES CATALOG

DARE TO DRILL FASTER UP TO 10× FASTER IN WOOD

Daredevil® spade bits lead the industry in speed, ease of use and hole quality for good reason — because trade professionals demand it. While other bits may come with standard tip threads, Bosch has incorporated a full-cone threaded tip that increases both bit speed and drilling ease. Then there’s the Daredevil® Speedwave paddle. The wave shape improves chip removal to further increase bit speed. And a Bosch-exclusive spur and reamer design not only scores the wood for clean hole entry, but offers angled cutting edges for reduced blowout. Bosch Daredevil®. Dare to drill faster.

149

DARE TO DRILL FASTER Bosch Daredevil® spade bits offer superior performance versus any other spade bit

Inches per second

WOOD DRILLING ACCESSORIES

DRILLING AND FASTENING

1.0

Than standard spade bits

0.8

0.6

0.4

0.2

0.0

WHAT USERS SAY ABOUT DAREDEVIL SPADE BITS 80

Lbs. of force required to drill through a 2× 4 in 1.8 seconds

10× FASTER

1.2

70 60 50 40 30 20 10 0

Daredevil®

Competitor A

Competitor B Competitor C

Daredevil®

Competitor A

Competitor B

from boschtools.com

SPUR AND REAMER Provide cleaner holes

SELF-FEEDING FULLTHREAD TIP For fast and effortless drilling

SPEEDWAVE PADDLE For faster chip removal

HEX SHANK WITH POWER GROOVE Reduces slippage

Available in 4 In. stubby for tight spaces and 16 In. extra long for overhead work

* Based on independent testing vs. standard spade bit

150

BOSCHTOOLS.COM 877-BOSCH-99

2018/2019 POWER TOOLS & ACCESSORIES CATALOG

OVERALL DIAMETER LENGTH QTY. BULK ITEM #

BULK QTY.

DSBS1003

3/8"

DSBS1003B

DSBS1005

1/2"

DSBS1005B

DSBS1007

5/8"

DSBS1007B

DSBS1009

3/4"

DSBS1009B

DSBS1011

7/8"

DSBS1011B

DSBS1013

DSBS1013B

DSBS1015

1-1/8"

DSBS1015B

DSBS1017

1-1/4"

DSBS1017B

DSBS1021

1-1/2"

DSBS1021B

DSB1001

1/4"

DSB1001B

DSB1002

5/16"

DSB1002B

DSB1003

3/8"

DSB1003B

DSB1004

7/16"

DSB1004B

DSB1005

1/2"

DSB1005B

DSB1006

9/16"

DSB1006B

DSB1007

5/8"

DSB1007B

DSB1008

11/16"

DSB1008B

DSB1009

3/4"

DSB1009B

DSB1010

13/16"

DSB1010B

DSB1011

7/8"

DSB1011B

DSB1012

15/16"

DSB1012B

DSB1013

DSB1013B

DSB1015

1-1/8"

DSB1015B

DSB1017

1-1/4"

DSB1017B

DSB1019

1-3/8"

DSB1019B

DSB1021

1-1/2"

DSB1021B

DLSB1003

3/8"

16"

DLSB1003B

DLSB1005

1/2"

16"

DLSB1005B

DLSB1007

5/8"

16"

DLSB1007B

DLSB1009

3/4"

16"

DLSB1009B

DLSB1011

7/8"

16"

DLSB1011B

DLSB1013

16"

DLSB1013B

DRILLING AND FASTENING

ITEM #

WOOD DRILLING ACCESSORIES

DAREDEVIL® SPADE BITS

DAREDEVIL® QUICK CHANGE EXTENSIONS ITEM #

DESCRIPTION

QTY.

DQCE1006

6" extension

DQCE1012

12" extension

DAREDEVIL® SPADE BIT SETS ITEM #

# OF PIECES

INCLUDES

CASE TYPE

DSB5003

(1) 1/2" × 6", (1) 3/4" × 6", (1) 1" × 6"

—

DSB5005

(1) 3/8" × 6", (1) 1/2" × 6", (1) 5/8" × 6", (1) 3/4" × 6", (1) 7/8" × 6", (1) 1" × 6" plus 6" extension

—

DSB5006

(1) 3/8" × 6", (1) 1/2" × 6", (1) 5/8" × 6", (1) 3/4" × 6", (1) 7/8" × 6", (1) 1" × 6"

—

DSB5006P

Pouch

DSB5008P

DSB5010

DSB5013P

DSBS5003

(1) 3/8" × 6", (1) 1/2" × 6", (1) 5/8" × 6", (1) 3/4" × 6", (1) 7/8" × 6", (1) 1" × 6" (1) 3/8" × 6", (1) 1/2" × 6", (1) 5/8" × 6", (1) 3/4" × 6", (1) 7/8" × 6", (1) 1" × 6", (1) 1-1/8" × 6", (1) 1-1/4" × 6" (1) 1/4" × 6", (1) 3/8" × 6", (1) 1/2" × 6", (1) 9/16" × 6", (1) 5/8" × 6", (1) 3/4" × 6", (1) 7/8" × 6", (1) 1" × 6", (1) 1-1/8" × 6", (1) 1-1/4" × 6" (1) 1/4" × 6", (1) 3/8" × 6", (1) 1/2" × 6", (1) 9/16" × 6", (1) 5/8" × 6", (1) 11/16" × 6", (1) 3/4" × 6", (1) 7/8" × 6", (1) 1" × 6", (1) 1-1/8" × 6", (1) 1-1/4" × 6", (1) 1-3/8" × 6", (1) 1-1/2" × 6" (1) 1/2" × 4", (1) 3/4" × 4", (1) 1" × 4"

DSBS5007P

(1) 1/2" × 4", (1) 5/8" × 4", (1) 3/4" × 4", (1) 7/8" × 4", (1) 1" × 4", (1) 6" extension

Pouch

Pouch — Pouch —

NOTE: Spade bits (or extension + drill bit) in excess of 8" should never exceed 600 RPM. Not for use in drill press or hardwoods.

151

DRILLING AND FASTENING

WOOD DRILLING ACCESSORIES

DAREDEVIL® HIGH-SPEED AUGER BITS

UP TO

2×

MORE HOLES PER CHARGE

SPECIALLY DESIGNED Engineered to work in cordless high-speed mode

DECREASED PITCH TIPS Faster drilling and up to 2× more holes per charge

EFFECTIVE OVERALL LENGTH 6-1/2 In. long for use in-between studs and in tight areas

REINFORCED TIPS Up to 2× longer life in nails than standard auger bits

SELF-FEEDING TIP Like all Daredevil® bits, the self-feeding tip pulls the bit through the work requiring little effort from the user is needed

FORTIFIED BIT SPINE Provides additional strength during aggressive drilling and quicker material removal 5/16 IN.″ SHANK Fits 1/2 In. and 3/8 In. chuck drills

DAREDEVIL® HIGH-SPEED AUGER DRILL BITS ITEM #

DIAMETER

OVERALL LENGTH

FLUTE LENGTH

SHANK SIZE

QUANTITY

NKSC08

1/2"

6-1/2"

5/16"

NKSC10

5/8"

6-1/2"

5/16"

NKSC12

3/4"

6-1/2"

5/16"

NKSC14

7/8"

6-1/2"

5/16"

NKSC16

6-1/2"

5/16"

NKSC20

1-1/4"

6-1/2"

5/16"

NKSC22

1-3/8"

6-1/2"

5/16"

DAREDEVIL® HIGH-SPEED AUGER DRILL BIT SET

152

ITEM #

# OF PIECES

INCLUDES

CASE TYPE

NKSC5003

(1) 5/8", (1) 3/4", (1) 1"

—

BOSCHTOOLS.COM 877-BOSCH-99

2018/2019 POWER TOOLS & ACCESSORIES CATALOG

REAMER EDGE Improves entry- and exit-hole quality

DUAL CUTTING EDGES Provide easier nail cutting and balanced drilling

REINFORCED SPINE Adds strength for heavy-duty applications

3× LONGER LIFE

* Based on independent testing vs. standard auger bit

ITEM #

OVERALL FLUTE SHANK BULK DIAMETER LENGTH LENGTH SIZE QTY. ITEM #

NKST04

1/4"

7-1/2"

3/16"

NKSB04 5

NKST05

5/16"

7-1/2"

1/4"

NKSB05 5

NKST06

3/8"

7-1/2"

1/4"

NKSB06 5

NKST07

7/16"

7-1/2"

1/4"

NKSB07

NKST08

1/2"

7-1/2"

5/16"

NKSB08 5

NKST09

9/16"

7-1/2"

7/16"

NKSB09 5

NKST10

5/8"

7-1/2"

7/16"

NKSB10

NKST11

11/16"

7-1/2"

7/16"

NKSB11

NKST12

3/4"

7-1/2"

7/16"

NKSB12

NKST13

13/16"

7-1/2"

7/16"

NKSB13

NKST14

7/8"

7-1/2"

7/16"

NKSB14

NKST15

15/16"

7-1/2"

7/16"

NKSB15

NKST16

7-1/2"

7/16"

NKSB16

NKST18

1-1/8"

7-1/2"

7/16"

NKSB18

NKST20

1-1/4"

7-1/2"

7/16"

NKSB20

NKST22

1-3/8"

7-1/2"

7/16"

NKSB22

NKST24

1-1/2"

7-1/2"

7/16"

NKSB24

NKMT06 3/8"

13"

1/4"

—

NKMT07

13"

1/4"

—

NKMT08 1/2"

13"

5/16"

—

NKMT09 9/16"

13"

7/16"

—

NKMT10

5/8"

13"

7/16"

—

NKMT11

11/16"

13"

7/16"

—

NKMT12

3/4"

13"

7/16"

—

NKMT13

13/16"

13"

7/16"

—

NKMT14

7/8"

13"

7/16"

—

NKMT15

15/16"

13"

7/16"

—

NKMT16

13"

7/16"

—

NKMT18

1-1/8"

13"

7/16"

—

NKMT20 1-1/4"

13"

7/16"

—

NKMT22 1-3/8"

13"

7/16"

—

NKMT24 1-1/2"

13"

7/16"

—

NKLT06

3/8"

17-1/2"

13-1/2"

1/4"

NKLB06

NKLT07

7/16"

17-1/2"

13-1/2"

1/4"

NKLB07

NKLT08

1/2"

17-1/2"

13-1/2"

5/16"

NKLB08

NKLT09

9/16"

17-1/2"

13-1/2"

7/16"

NKLB09

NKLT10

5/8"

17-1/2"

13-1/2"

7/16"

NKLB10

NKLT11

11/16"

17-1/2"

13-1/2"

7/16"

NKLB11

NKLT12

3/4"

17-1/2"

13-1/2"

7/16"

NKLB12

NKLT13

13/16"

17-1/2"

13-1/2"

7/16"

NKLB13

NKLT14

7/8"

17-1/2"

13-1/2"

7/16"

NKLB14

NKLT15

15/16"

17-1/2"

13-1/2"

7/16"

NKLB15

NKLT16

17-1/2"

13-1/2"

7/16"

NKLB16

NKLT17

1-1/16"

17-1/2"

13-1/2"

7/16"

NKLB17

NKLT18

1-1/8"

17-1/2"

13-1/2"

7/16"

NKLB18

NKLT20

1-1/4"

17-1/2"

13-1/2"

7/16"

NKLB20

NKLT22

1-3/8"

17-1/2"

13-1/2"

7/16"

NKLB22

NKLT24

1-1/2"

17-1/2"

13-1/2"

7/16"

NKLB24

7/16"

BULK QTY.

WOOD DRILLING ACCESSORIES

REINFORCED TIP Withstands nail hits

DAREDEVIL® AUGER BITS

DRILLING AND FASTENING

DAREDEVIL® AUGER BITS

DAREDEVIL® AUGER BIT SET ITEM # NKST5003

# OF PIECES 3

INCLUDES (1) 5/8" × 7-1/2", (1) 3/4" × 7-1/2", (1) 1" × 7-1/2"

CASE TYPE —

NOTE: Auger bits (or extension + drill bit) in excess of 8" should never exceed 600 RPM

153

SELF-FEED BITS

SELF-FEED BIT EXTENSIONS

These Bosch bits are designed for the professional plumber and electrician who need to make large, rough holes in wood.

DRILLING AND FASTENING

WOOD DRILLING ACCESSORIES

Each bit features: ff 7/16 In. hex shank for reduced slippage (3 In. and larger three-flat shank) ff Chip lifters and spurs that can be resharpened to maximize bit life ff Deep cutter gullets prevent stalling and provide smoother drilling ff Replaceable threaded tip and hex key included

154

ITEM #

DIAMETER

REPLACEMENT KIT ITEM #

SF1001

SF5018

SF1121

1-1/8"

SF5018

SF1251

1-1/4"

SF5018

SF1371

1-3/8"

SF5018

SF1501

1-1/2"

SF5018

SF1751

1-3/4"

SF5018

SF2001

SF5018

SF2121

2-1/8"

SF5018

SF2251

2-1/4"

SF5018

SF2561

2-9/16"

SF5018

SF3001

SF5032

SF3621

3-5/8"

SF5032

SF4621

4-5/8"

SF5032

ITEM #

LENGTH

SHANK

EX1006

7/16"

EX1012

12"

7/16"

SELF-FEED BIT REPLACEMENT KITS

ITEM #

# OF PIECES

SF5018

SF5032

INCLUDES (1) screw tip, (1) set screw, (1) 1/8" hex wrench (1) screw tip, (1) set screw, (1) 5/32" hex wrench

CASE TYPE — —

BELL HANGER/ INSTALLER BITS Bosch Bell Hanger bits are made for the professional electrician or low-voltage cable installer. Each bit features: ff Hole-in-flute design for fishing cable through drilled holes ff Three-flat shank for reduced slippage ff E xtra length for deep drilling

ITEM #

DIAMETER

OVERALL LENGTH

BH1001T

1/4"

12"

BH1002T

5/16"

12"

BH1003T

3/8"

12"

BH1005T

1/2"

12"

BH2001T

1/4"

18"

BH2002T

5/16"

18"

BH2003T

3/8"

18"

BH2005T

1/2"

18"

BH3001T

1/4"

24"

BH3002T

5/16"

24"

BH3003T

3/8"

24"

BH3005T

1/2"

24"

BOSCHTOOLS.COM 877-BOSCH-99

2018/2019 POWER TOOLS & ACCESSORIES CATALOG

HINGE BORING BITS Hinge Boring bits from Bosch meet European-type hinge specifications.

DIAMETER

SHANK SIZE

1/4"

SP508

1/4"

SP510

#10

1/4"

SP512

#12

1/4"

SCREW PILOT BIT SET ITEM #

# OF PIECES

SP515

CASE TYPE

INCLUDES (1) #6, (1) #8, (1) #10, (1) #12, (1) Allen® wrench

—

BRAD POINT BITS Brad Point bits from Bosch are made to deliver accurate, clean holes every time. Each bit features: ff Easy tip positioning and accurate starts ff Design for both portable drills and drill presses ITEM # B14601 B14602 B14603 B14604 B14605 B14606 B14607 B14609

DIAMETER 1/8" 3/16" 1/4" 5/16" 3/8" 7/16" 1/2" 5/8"

SHANK 1/8" 3/16" 1/4" 5/16" 5/16" 5/16" 5/16" 3/8"

OVERALL LENGTH 2-3/4" 3-1/2" 3-5/16" 4-7/16" 5-3/16" 5-9/16" 5-15/16" 7"

USABLE LENGTH 1-5/8" 2-5/16" 2-1/4" 2-3/4" 3-1/4" 3-1/2" 3-1/2" 4-1/4"

ITEM # T15005 T15015 T15008 T15018 T15010 T15110 T15215 T15020 T15025 T15030 T15035 T15040

DIAMETER 5mm 5mm 8mm 8mm 10mm 10mm 15mm 20mm 25mm 30mm 35mm 40mm

DESCRIPTION Right twist Left twist Right twist Left twist Right twist Left twist For European-type For European-type For European-type For European-type For European-type For European-type

hinges hinges hinges hinges hinges hinges

DRILLING AND FASTENING

ITEM # SP506

WOOD DRILLING ACCESSORIES

Each bit features: ff Centering point and outside scoring tips ff 10mm shank with locking flat and adjustable screw top for automatic and semi-automatic boring machines ff Not for use with three-jaw chucks

SCREW PILOT BITS

BRAD POINT BIT SET ITEM #

# OF PIECES

B14616

INCLUDES (1) 1/4", (1) 5/16", (1) 3/8", (1) 7/16", (1) 1/2"

CASE TYPE —

155

WOOD DRILLING ACCESSORIES

DRILLING AND FASTENING

FORSTNER BITS The Bosch line of Forstner bits produces consistently smooth, flat-bottomed holes. ITEM # FB004 FB006 FB008 FB010 FB012 FB014 FB016 FB018

DIAMETER 1/4" 3/8" 1/2" 5/8" 3/4" 7/8" 1" 1-1/8"

ITEM # FB020 FB022 FB024 FB026 FB028 FB030 FB032 FB034

DIAMETER 1-1/4" 1-3/8" 1-1/2" 1-5/8" 1-3/4" 1-7/8" 2" 2-1/8"

FORSTNER BIT SETS

156

ITEM #

# OF PIECES

FB1600

FB700

INCLUDES (1) 1/4", (1) 3/8", (1) 1/2", (1) 5/8", (1) 3/4", (1) 7/8", (1) 1", (1) 1-1/8", (1) 1-1/4", (1) 1-3/8", (1) 1-1/2", (1) 1-5/8", (1) 1-3/4", (1) 1-7/8", (1) 2", (1) 2-1/8" (1) 1/4", (1) 3/8", (1) 1/2", (1) 5/8", (1) 3/4", (1) 7/8", (1) 1"

BOSCHTOOLS.COM 877-BOSCH-99

CASE TYPE Wood Wood

2018/2019 POWER TOOLS & ACCESSORIES CATALOG

Bosch provides more innovative features and advanced design in hole saws than any other brand. From the introduction of the first AutoStart pilot for diamond drilling to cups that cut more materials — from wood to hard tile — Bosch has the right hole saw solution for virtually any application.

DRILLING AND FASTENING

HOLE SAWS

STONE

PORCELAIN TILE PE5

CERAMIC TILE

MASONRY

STAINLESS STEEL

METAL

SHEET METAL

CEMENT BOARD

FIBER GLASS

PLASTIC

LAMINATE

DRYWALL

WOOD

HOLE SAW SELECTION CHART

HOLE SAWS DAREDEVIL® CARBIDE DAREDEVIL® RECESSED DAREDEVIL® WOOD DIAMOND EDGE™ IMPACT TOUGH™ BI-METAL = Recommended = Acceptable = Not Recommended

157

DARE TO DRILL FASTER UP TO 10× FASTER IN WOOD

Premium carbide teeth on the Bosch Daredevil® Carbide Hole Saw provide greater speed and better results on the job. These hole saws drill up to 10× faster in wood than bi-metal and deliver fast, clean holes in multiple materials, including vinyl, wood, drywall, tile, brick, block and cement.

158

BOSCHTOOLS.COM 877-BOSCH-99

2018/2019 POWER TOOLS & ACCESSORIES CATALOG

DAREDEVIL® HOLE SAWS

DAREDEVIL® CARBIDE HOLE SAWS MULTI-MATERIAL PILOT BIT Drills through multiple materials

50% DEEPER CUP Drills through thicker materials and makes the job easier

LARGE GULLETS Facilitates plug removal and quickly clears debris

DAREDEVIL® CARBIDE HOLE SAWS SPINLOCK UNIVERSAL ARBOR ITEM#

DIAMETER

CUT DEPTH

HMD100

2-3/8"

HMD112

1-1/8"

2-3/8"

HMD125

1-1/4"

2-3/8"

HMD137

1-3/8"

2-3/8"

HMD150

1-1/2"

2-3/8"

HMD175

1-3/4"

2-3/8"

HMD200

2-3/8"

HMD212

2-1/8"

2-3/8"

HMD225

2-1/4"

2-3/8"

HMD250

2-1/2"

2-3/8"

HMD256

2-9/16"

2-3/8"

HMD275

2-3/4"

2-3/8"

HMD300 HMD350 HMD363 HMD412 HMD450

3" 3-1/2" 3-5/8" 4-1/8" 4-1/2"

2-3/8" 2-3/8" 2-3/8" 2-3/8" 2-3/8"

TOOLLESS CHANGES

MANDREL

PILOT BIT HTCTCP-C

HSA-MD HSP-MD, HSP-HS

DRILLING AND FASTENING

DAREDEVIL® SPINLOCK ARBOR Fits Quick Change cups and 1/4 In. hex pilot bits

HOLE SAWS

PREMIUM CARBIDE TEETH Provide greater speed and longer life for increased productivity on the job

DAREDEVIL® SPINLOCK ARBOR

SpinLock

DAREDEVIL® ARBOR Fits all sizes and brands 1. ATTACH TOOLLESS CHANGE Means greater speed on the job

UNIVERSAL 1/4 IN. QUICK CHANGE Easily and quickly switch out pilot bits

2. SPIN

3. LOCK

ROBUST DESIGN For professional applications SMALL CUP ADAPTER For sizes 5/8 In. up to 1-3/16 In. 159

HOLE SAWS

DRILLING AND FASTENING

DAREDEVIL® RECESSED LIGHTING HOLE SAWS HMD636RL

COMPATIBLE WITH DAREDEVIL® SPINLOCK ARBOR Fits all sizes and brands

PREMIUM CARBIDE TEETH For long life and 10× faster performance

1-1/4 IN. SHALLOW DEPTH CUP Optimized for drilling recessed lighting in ceilings and concealed spaces

LARGE GULLETS Facilitates plug removal and quickly clears debris

DAREDEVIL® RECESSED LIGHTING HOLE SAWS SPINLOCK UNIVERSAL ARBOR

160

ITEM#

DIAMETER

CUT DEPTH

HMD436RL

4-3/8"

1-1/4"

HMD636RL

6-3/8"

1-1/4"

BOSCHTOOLS.COM 877-BOSCH-99

MANDREL

PILOT BIT

HSA-HS, HSA-MD

HSP-HS, HSP-MD

2018/2019 POWER TOOLS & ACCESSORIES CATALOG

DAREDEVIL® CARBON HOLE SAWS

EXTRA LARGE GULLETS Large clearance slots for fast drilling and easy plug removal

INTEGRATED ARBOR AND PILOT BIT One-piece design for ease of use

1/4 IN. HEX SHANK Use with 1/4 In. Quick Change chuck

DAREDEVIL® CARBON HOLE SAWS ITEM#

DIAMETER

CUT DEPTH

HCD100

1-7/8"

HCD125 HCD150 HCD175 HCD200 HCD212 HCD225

1-1/4" 1-1/2" 1-3/4" 2" 2-1/8" 2-1/4"

1-7/8" 1-7/8" 1-7/8" 1-7/8" 1-7/8" 1-7/8"

HCD250

2-1/2"

1-7/8"

DRILLING AND FASTENING

TURBO-TEETH DESIGN ff B osch-exclusive two-tooth design for high-speed performance and long life ff 5× faster performance than a standard wood hole saw

HOLE SAWS

DEEP CUP DESIGN Perfect for drilling through thick materials

DAREDEVIL® CARBON HOLE SAW SETS ITEM # HCD005 HCD007

# OF PIECES 5 7

INCLUDES Hole saws: (1) 1", (1) 1-1/2", (1) 2", (1) 2-1/2"; (1) arbor with pilot bit Hole saws: (1) 1", (1) 1-1/4", (1) 1-1/2", (1) 1-3/4", (1) 2", (1) 2-1/2"; (1) arbor with pilot bit

CASE TYPE — —

161

DARE TO DRILL FASTER

TURBO-TEETH TECHNOLOGY FOR 5× FASTER DRILLING AND LONGER LIFE

DAREDEVIL® CARBON HOLE SAWS Engineered to be 5× faster than standard wood hole saws, Daredevil® Carbon Hole Saws employ Bosch’s exclusive Turbo-Teeth design. This exclusive two-tooth pattern delivers faster drilling and longer life for best-in-class results in wood and plywood applications.

162

BOSCHTOOLS.COM 877-BOSCH-99

2018/2019 POWER TOOLS & ACCESSORIES CATALOG

BI-METAL HOLE SAWS

FASTER, LONGER LIFE 8% COBALT ALLOY For longer life and greater heat resistance

PROGRESSOR TOOTH DESIGN Cuts faster and lasts longer

REINFORCED SHOULDER For added strength and longer life

BI-METAL HOLE SAWS STANDARD ITEM#

DIAMETER

CUT DEPTH

HB062

9/16"

1-5/8"

HB063

5/8"

1-5/8"

HB069

11/16"

1-5/8"

HB075

3/4"

1-5/8"

HB081

13/16"

1-5/8"

HB087

7/8"

1-5/8"

HB094

15/16"

1-5/8"

HB100

1-5/8"

HB106

1-1/16"

1-5/8"

HB112

1-1/8"

1-5/8"

HB119

1-3/16"

1-5/8"

HB125

1-1/4"

1-5/8"

HB131 HB136 HB144 HB150

1-5/16" 1-3/8" 1-7/16" 1-1/2"

1-5/8" 1-5/8" 1-5/8" 1-5/8"

HB156

1-9/16"

1-5/8"

HB163

1-5/8"

HB169

1-11/16"

1-5/8"

HB175

1-3/4"

1-5/8"

HB181

1-13/16"

1-5/8"

HB187 HB200

1-7/8" 2"

1-5/8" 1-5/8"

HB206 HB212 HB225 HB231 HB236 HB250 HB256 HB263 HB269

2-1/16" 2-1/8" 2-1/4" 2-5/16" 2-3/8" 2-1/2" 2-9/16" 2-5/8" 2-11/16"

1-5/8" 1-5/8" 1-5/8" 1-5/8" 1-5/8" 1-5/8" 1-5/8" 1-5/8" 1-5/8"

MANDREL

SPINLOCK UNIVERSAL ARBOR PILOT BIT

MANDREL

PILOT BIT

HSPB

HSA-HS

HSP-HS

HSBAM

DRILLING AND FASTENING

HOLE SAWS

COMPATIBLE WITH STANDARD AND QUICK CHANGE ARBORS

HSBAM, HSBAL, HSBAMP

163

BI-METAL HOLE SAWS (CONTINUED)

DRILLING AND FASTENING

HOLE SAWS

STANDARD ITEM#

DIAMETER

CUT DEPTH

HB275

2-3/4"

1-5/8"

HB287

2-7/8"

1-5/8"

HB300

1-5/8"

HB312

3-1/8"

1-5/8"

HB325

3-1/4"

1-5/8"

HB338

3-3/8"

1-5/8"

HB350

3-1/2"

1-5/8"

HB363

3-5/8"

1-5/8"

HB375

3-3/4"

1-5/8"

HB387

3-7/8"

1-5/8"

HB400

1-5/8"

HB412

4-1/8"

1-5/8"

HB425

4-1/4"

1-5/8"

HB436

4-3/8"

1-5/8"

HB450

4-1/2"

1-5/8"

HB475

4-3/4"

1-5/8"

HB500

1-5/8"

HB550

5-1/2"

1-5/8"

HB575

5-3/4"

1-5/8"

HB600

1-5/8"

MANDREL

PILOT BIT

MANDREL

PILOT BIT

HSBAM, HSBAL, HSBAMP

HSPB

HSA-HS

HSP-HS

BI-METAL HOLE SAW SETS

HB17PL

164

SPINLOCK UNIVERSAL ARBOR

ITEM #

# OF PIECES

HB17PL

17 (plumber’s kit)

HB19EL

19 (electrician’s kit)

HB25M

25 (master kit)

HE1

HBUSKIT

BOSCHTOOLS.COM 877-BOSCH-99

HB19EL

HB25M

HE1

INCLUDES Hole saws: (1) 3/4", (1) 7/8", (1) 1-1/8", (1) 1-3/8", (1) 1-3/4", (1) 2-1/4", (1) 2-9/16"; (3) small adapters (AN01); (4) large adapters (AN02); (1) Quick Change mandrel (PCM38); (2) pilot bits (HB85PB) Hole saws: (1) 3/4", (1) 7/8", (1) 1-1/8", (1) 1-3/8", (1) 1-3/4", (1) 2", (1) 2-9/16", (1) 3"; (3) small adapters (AN01); (5) large adapters (AN02); (1) Quick Change mandrel (PCM38); (2) pilot bits (HB85PB) Hole saws: (1) 3/4", (1) 7/8", (1) 1", (1) 1-1/8", (1) 1-3/8", (1) 1-1/2", (1) 1-3/4", (1) 2", (1) 2-1/8", (1) 2-1/2", (1) 3"; (4) small adapters (AN01); (7) large adapters (AN02); (1) Quick Change mandrel (PCM38); (2) pilot bits (HB85PB) (1) PCM38 adapter for hole saws; (1) adapter for hole saw enlargement plus; (3) washers Hole saws: (1) 1", (1) 1-1/2", (1) 2-1/8", (1) 2-1/2"; (1) small adapter (AN01); (1) large adapter (AN02); (1) Quick Change mandrel (PCM38); (1) pilot bit (HB85PB)

HBUSKIT CASE TYPE Plastic Plastic Plastic — —

2018/2019 POWER TOOLS & ACCESSORIES CATALOG

HOLE SAWS

DRILLING AND FASTENING

EDGE™ IMPACT TOUGH™ HOLE SAWS DELIVERS 2× LIFE OVER STANDARD IMPACT-RATED HOLE SAWS BI-METAL 8-TPI TEETH Engineered for optimal cutting in sheet metal

DEPTH STOP Helps prevent breakthrough and provides accurate hole depth for more precise drilling

PILOT BIT SPRING Provides automatic plug ejection

1/4 IN. HEX SHANK Offers compatibility with most drills and 1/4 In. hex shank impactors

INTEGRATED ONE-PIECE DESIGN Presents convenience with no separate arbor or pilot bit required

EDGE™ IMPACT TOUGH™ HOLE SAWS ITEM #

DIAMETER

HTW34

3/4"

HTW78

7/8"

HTW1

HTW118

1-1/8"

HTW114

1-1/4"

HTW138

1-3/8"

HTW112

1-1/2"

HTW118

HTW138

EDGE™ IMPACT TOUGH™ HOLE SAW SET ITEM # HTWS

# OF PIECES 3

INCLUDES (1) 7/8", (1) 1-1/8", (1) 1-3/8"

CASE TYPE —

165

DIAMOND HOLE SAWS WITH AUTOSTART AUTOSTART PILOT BIT

FAST AND EASY STARTS, EVEN IN THE HARDEST TILE VACUUM-BRAZED DIAMOND GRIT Cuts faster and lasts longer

CARBIDE TIP Provides extended life in porcelain and granite

DRILLING AND FASTENING

HOLE SAWS

SEGMENTED TEETH Reduce debris and heat buildup SPRING-LOADED, RETRACTABLE SHAFT Allows walk-free cutting without a pilot hole

INTEGRAL QUICK CHANGE ADAPTER Changes hole saw sizes and types in seconds; easy plug removal

DIAMOND HOLE SAWS ITEM #

UNIQUE GRIND Starts holes accurately every time

DIAMOND HOLE SAW SETS

USE WITH PILOT DIAMETER* MANDREL BIT

HDG316 3/16" HDG14

1/4"

HDG516 5/16"

Not required

HDG38

3/8"

HDG12

1/2"

HDG58

5/8"

ITEM #

HDG34

3/4"

HDG138QA

HDG78

7/8"

HDG1

HDG138QA

HDG7

HDG118 1-1/8"

HDG11

HDG114 1-1/4"

HDGM

HDG138 1-3/8"

HDG7

HDG11

HDGM

# OF PIECES INCLUDES (1) mandrel; (1) AutoStart pilot bit; 3 (1) 1-3/8" hole saw (1) mandrel; (1) AutoStart pilot bit; hole saws: 7 (1) 5/8", (1) 1", (1) 1-3/8", (1) 2", (1) 2-1/4" (1) mandrel; (1) AutoStart pilot bit; hole saws: 11 (1) 1/4", (1) 5/16", (1) 3/8", (1) 5/8", (1) 1", (1) 1-3/8", (1) 2", (1) 2-1/4", (1) 2-1/2" 3 (1) 3/16", (1) 1/4", (1) 1/2"

CASE TYPE — Plastic Plastic —

** WARNING: Use only with machines designed for wet sawing and on a GFCI-protected circuit (if the machine is electrical)

HDG112 1-1/2" HDG158 1-5/8" HDG134 1-3/4" HDG2

HDG218 2-1/8" HDG214 2-1/4"

HDGQA

HDGPB6

HDG212 2-1/2" HDG234 2-3/4" HDG3

COMMON MATERIALS FOR DIAMOND GRIT HOLE SAWS

Use water for longer life

HDG318 3-1/8" HDG314 3-1/4" HDG312 3-1/2"

Porcelain Tile

Granite

Ceramic Tile

Limestone

Slate

Travertine

Marble

HDG358 3-5/8" HDG334 3-3/4" HDG4

HDG418 4-1/8" * = 1" maximum recommended cutting depth

166

BOSCHTOOLS.COM 877-BOSCH-99

2018/2019 POWER TOOLS & ACCESSORIES CATALOG

STANDARD ARBORS AND ACCESSORIES ARBORS HSBAL ITEM # HSBAL HSBAMP HSBAM

HSBAMP

HSBAM

DESCRIPTION Large two-pin mandrel for hole saws 1-1/4"–6" Large two-pin mandrel for hole saws 1-1/4"–6" Medium mandrel for hole saws 9/16"–6"

SHANK DIAMETER 7/16" 3/8" 3/8"

PILOT BIT USE WITH MANDREL HSBAM, HSBAMP, HSBAL

HOLE SAW SERIES Bi-metal, sheet metal

DIAMOND HOLE SAW ARBOR AND ACCESSORY ARBOR ITEM # HDGQA

SHANK DIAMETER FITS HOLE SAW SIZES 3/8" 3/4"–4-1/8"

PILOT BIT AutoStart carbide

ADAPTER Use with AN01 or AN02

PILOT BIT ITEM # HDGPB6

DESCRIPTION AutoStart (for diamond hole saws 3/4"–4-1/8")

USE WITH MANDREL HSA-HS, HSA-MD

HOLE SAW SERIES Diamond

SPINLOCK UNIVERSAL ARBORS AND ACCESSORIES ARBORS HSA-MD ITEM # HSA-MD HSA-HS

HOLE SAWS

DESCRIPTION 3-1/8" high-speed steel pilot bit

DRILLING AND FASTENING

ITEM # HSPB

HSA-HS

DESCRIPTION SpinLock arbor with Daredevil® multipurpose pilot bit SpinLock arbor with high-speed steel pilot bit

PILOT BITS

SHANK DIAMETER 3/8" 3/8"

EXTENSIONS

PCPD4 Cobalt pilot bit

HSP-HS High-speed steel pilot bit

HB85PB High-speed steel pilot bit

HSP-MD Daredevil® multipurpose carbide-tipped pilot bit

HTCTCP Carbide-tipped pilot bit ITEM#

DESCRIPTION 1/4" hex 100mm high-speed HSP-HS steel pilot bit 1/4" hex 100mm Daredevil® HSP-MD multipurpose pilot bit PCPD4

4-3/4" cobalt pilot bit

HTCTCP

4-3/4" carbide tipped pilot bit

HS85PB

3-3/8" high-speed steel pilot bit

USE WITH MANDREL

HSA-HS, HSA-MD, PCM38, PCM12

PCMEX38

PCMEX12 ITEM # PCMEX38 PCMEX12

SHANK LENGTH DIAMETER USE WITH MANDREL 12" 3/8" PCM38, HSBAMP, HSBAM 12" 1/2" PCM12, HSBAL

HOLE SAW SERIES Daredevil®, bi-metal Daredevil®, bi-metal Daredevil®, bi-metal Daredevil® Bi-metal, sheet metal

167

SCREWDRIVER BITS

DRILLING AND FASTENING

SCREWDRIVER BITS

BIT DESIGN

168

DRYWALL BIT

Reduced-diameter head is designed to limit cam out when used in a drywall gun.

DECKING BIT

Bits are designed for repetitive drives to minimize damage to the work surface or materials.

ROUND BODY

Allows screw to be set below the work surface without damaging the work as a full-hex body could.

HARDNESS Impact Tough™ bits are designed to withstand the high torque associated with today’s more powerful impact drivers. Machined tips create a stronger hold on the screw. The Xtended Torsion Zone helps to reduce breakage and to provide 10× bit life. EXTRA HARD

Fully hardened and tempered for extended bit life under constant heavy-duty use. The tip is precision formed for a proper fit.

GRIPPING POWER RIBBED TIP

Increases the gripping power between the bit and screw head, reducing the force to drive the screw.

BOSCHTOOLS.COM 877-BOSCH-99

2018/2019 POWER TOOLS & ACCESSORIES CATALOG

DUAL-TIP BIT FOR PHILLIPS® AND ROBERTSON SCREWS

2 in 1

BIT GEOMETRY Allows user to drive Phillips® (P2) and Robertson (square drive) (R2) screw heads

XTENDED TORSION ZONE Absorbs torque peaks reducing stress at the tip

—

ELECTRONICS HOBBY

—

HVAC

—

— —

—

RECREATION

—

— —

—

— —

—

DRILLING AND FASTENING

—

POZIDRIV®

—

MARINE

SUBFLOOR

—

FURNITURE

SECURITY

FREARSON®

—

DECKING DRYWALL

CLUTCH G

—

SPANNER

—

CONTROL PANELS

—

CABINETRY CONSTRUCTION

TRI-WING®

—

TORQ-SET®

AVIATION

ALLEN® SECURITY

—

MACHINE TOOLS / METAL MANUFACTURED HOUSING

TORX® ALIGN

—

AUTOMOTIVE

ALLEN®

APPLIANCE

TORX® SECURITY

TORX®

SLOTTED

SQUARE RECESS

PHILLIPS®

APPLICATION GUIDE

SCREWDRIVER BITS

DIN/ANSI ratings to meet U.S. and European standards

— —

—

169

IMPACT TOUGH™ IMPACT DRIVER BITS AND SOCKETS

DRILLING AND FASTENING

SCREWDRIVER BITS

Impact Tough™ driver bits and sockets are designed to withstand the high torque produced by today’s more powerful impact drivers. The screwdriver bits have an Xtended Torsion Zone to absorb torque peaks, extending bit life over standard screwdriving bits. They also feature machined tips for outstanding bit grip. Impact Tough™ sockets are engineered for high torque, with forged steel that reduces breakage and absorbs torque peaks to reduce stress.

TAKES THE IMPACT AND COMPLETES THE JOB

MACHINED TIP Reduces breakage and cam-out

Engineered for high torque

XTENDED TORSION ZONE Absorbs torque peaks reducing stress at the tip

Bosch has engineered a line of screwdriving bits, nutsetters and sockets that can handle torque generated from today’s high-powered impact drivers.

SCREWDRIVER BITS AVAILABLE IN

PHILLIPS®

INSERT BITS

SQUARE

HARDENED CORE Increases bit strength, reduces fracture

TORX®

PKG. ITEM#

POINT

LENGTH

SHANK

HARDNESS

PKG. QTY.

BULK ITEM#

ITPH1102

1/4"

Impact Tough™

ITPH11B

ITPH1105

1/4"

Impact Tough™

—

ITPH2102

1/4"

Impact Tough™

ITPH21B

ITPH2105

1/4"

Impact Tough™

—

ITPH2115

1/4"

Impact Tough™

—

ITPH2R102

P2R

1/4"

Impact Tough™

ITPH2R1B

ITPH3102

1/4"

Impact Tough™

ITPH31B

ITPH3105

1/4"

Impact Tough™

—

ITP2R2102

P2R2

1/4"

Impact Tough™

ITP2R21B

ITP2R2105

P2R2

1/4"

Impact Tough™

—

ITSQ1102

1/4"

Impact Tough™

ITSQ11B

ITSQ1105

1/4"

Impact Tough™

—

ITSQ2102

1/4"

Impact Tough™

ITSQ21B

ITSQ2105

1/4"

Impact Tough™

—

ITSQ2115

1/4"

Impact Tough™

—

ITSQ3102

1/4"

Impact Tough™

ITSQ31B

ITT15102

T15

1/4"

Impact Tough™

ITT151B

ITT20102

T20

1/4"

Impact Tough™

ITT201B

ITT25102

T25

1/4"

Impact Tough™

ITT251B

ITT30102

T30

1/4"

Impact Tough™

ITT301B

ITT40102

T40

1/4"

Impact Tough™

ITT401B

NOTE: Impact Tough™ bulk items can only be ordered in multiples of 5 or 10 depending on the item. Minimum quantities may apply.

170

BOSCHTOOLS.COM 877-BOSCH-99

2018/2019 POWER TOOLS & ACCESSORIES CATALOG

POINT

LENGTH

SHANK

HARDNESS

PKG. QTY.

BULK ITEM#

1/4"

Impact Tough™

ITPH12B

ITPH13501

3.5"

1/4"

Impact Tough™

ITPH135B

ITPH1601

1/4"

Impact Tough™

ITPH16B

ITPH2201

1/4"

Impact Tough™

ITPH22B

ITPH2205

1/4"

Impact Tough™

—

ITPH2215

1/4"

Impact Tough™

—

ITPH23501

3.5"

1/4"

Impact Tough™

ITPH235B

ITPH2601

1/4"

Impact Tough™

ITPH26B

ITPH3201

1/4"

Impact Tough™

ITPH32B

ITPH33501

3.5"

1/4"

Impact Tough™

ITPH335B

ITPH3601

1/4"

Impact Tough™

ITPH36B

ITP2R2201

P2R2

1/4"

Impact Tough™

ITP2R22B

ITP2R2205

P2R2

1/4"

Impact Tough™

—

ITSQ1201

1/4"

Impact Tough™

ITSQ12B

ITSQ13501

3.5"

1/4"

Impact Tough™

ITSQ135B

ITSQ1601

1/4"

Impact Tough™

ITSQ16B

ITSQ2201

1/4"

Impact Tough™

ITSQ22B

ITSQ2205

1/4"

Impact Tough™

—

ITSQ2215

1/4"

Impact Tough™

—

ITSQ23501

3.5"

1/4"

Impact Tough™

ITSQ235B

ITSQ2601

1/4"

Impact Tough™

ITSQ26B

ITSQ3201

1/4"

Impact Tough™

ITSQ32B

ITSQ33501

3.5"

1/4"

Impact Tough™

ITSQ335B

ITSQ3601

1/4"

Impact Tough™

ITSQ36B

ITT15201

T15

1/4"

Impact Tough™

ITT152B

ITT153501

T15

3.5"

1/4"

Impact Tough™

ITT1535B

ITT15601

T15

1/4"

Impact Tough™

ITT156B

ITT20201

T20

1/4"

Impact Tough™

ITT202B

ITT20205

T20

1/4"

Impact Tough™

—

ITT203501

T20

3.5"

1/4"

Impact Tough™

ITT2035B

ITT20601

T20

1/4"

Impact Tough™

ITT206B

ITT25201

T25

1/4"

Impact Tough™

ITT252B

ITT25205

T25

1/4"

Impact Tough™

—

ITT25215

T25

1/4"

Impact Tough™

—

ITT253501

T25

3.5"

1/4"

Impact Tough™

ITT2535B

ITT25601

T25

1/4"

Impact Tough™

ITT256B

ITT30201

T30

1/4"

Impact Tough™

ITT302B

ITT303501

T30

3.5"

1/4"

Impact Tough™

ITT3035B

ITT30601

T30

1/4"

Impact Tough™

ITT306B

ITT40201

T40

1/4"

Impact Tough™

ITT402B

ITT403501

T40

3.5"

1/4"

Impact Tough™

ITT4035B

ITT40601

T40

1/4"

Impact Tough™

ITT406B

SCREWDRIVER BITS

PKG. ITEM# ITPH1201

DRILLING AND FASTENING

POWER BITS

NOTE: Impact Tough™ bulk items can only be ordered in multiples of 5 or 10 depending on the item. Minimum quantities may apply.

CUSTOM CASE SYSTEM Custom is better. The Bosch Custom Case System for Impact Tough™ bits allows creation of a bit case that’s tailored to the requirements of the job. See pages 184–185 for more information about the Custom Case System.

171

DRILLING AND FASTENING

SCREWDRIVER BITS

DOUBLE-ENDED BITS

BIT HOLDERS

PKG. ITEM# ITDEPH12503 ITDEPH13501 ITDEPH1601 ITDEPH22503 ITDEPH23501 ITDEPH2601 ITDEPH32503 ITDEPH33501 ITDEPH3601

POINT P1/P1 P1/P1 P1/P1 P2/P2 P2/P2 P2/P2 P3/P3 P3/P3 P3/P3 P1/P2, P2/P2, ITDEPHV2503 P2/P3 ITDEP2R22503 P2R2/P2R2 ITDEP2R23501 P2R2/P2R2 ITDEP2R2601 P2R2/P2R2 ITDESQ12503 R1/R1 ITDESQ13501 R1/R1 ITDESQ1601 R1/R1 ITDESQ22503 R2/R2 ITDESQ23501 R2/R2 ITDESQ2601 R2/R2 ITDESQ32503 R3/R3 ITDESQ33501 R3/R3 ITDESQ3601 R3/R3 R1/R2, R2/R2, ITDESQV2503 R2/R3 ITDET152503 T15/T15 ITDET153501 T15/T15 ITDET15601 T15/T15 ITDET202503 T20/T20 ITDET203501 T20/T20 ITDET20601 T20/T20 ITDET252503 T25/T25 ITDET253501 T25/T25 ITDET25601 T25/T25 ITDET302503 T30/T30 ITDET303501 T30/T30 ITDET30601 T30/T30 T15/T20, T25/ ITDETV2503 T25, T25/T30 P2/P2, R2/R2, ITDEV2503 T25/T25

PKG. ITEM# ITBH201 ITBHQC201

NUTSETTERS

PKG. ITEM# ITNS14 ITNS516 ITNS38 ITNS716 ITNS12 ITNS2490 ITNS142 ITNS5162 ITNS382 ITNS7162 ITNS122 ITNS2492

LENGTH 2.5" 3.5" 6" 2.5" 3.5" 6" 2.5" 3.5" 6"

SHANK 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4"

HARDNESS Impact Tough™ Impact Tough™ Impact Tough™ Impact Tough™ Impact Tough™ Impact Tough™ Impact Tough™ Impact Tough™ Impact Tough™

PKG. QTY. 3 1 1 3 1 1 3 1 1

BULK ITEM# ITDEPH125B ITDEPH135B ITDEPH16B ITDEPH225B ITDEPH235B ITDEPH26B ITDEPH325B ITDEPH335B ITDEPH36B

2.5"

1/4"

Impact Tough™

—

2.5" 3.5" 6" 2.5" 3.5" 6" 2.5" 3.5" 6" 2.5" 3.5" 6"

1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4"

Impact Impact Impact Impact Impact Impact Impact Impact Impact Impact Impact Impact

Tough™ Tough™ Tough™ Tough™ Tough™ Tough™ Tough™ Tough™ Tough™ Tough™ Tough™ Tough™

3 1 1 3 1 1 3 1 1 3 1 1

ITDEP2R225B ITDEP2R235B ITDEP2R26B ITDESQ125B ITDESQ135B ITDESQ16B ITDESQ225B ITDESQ235B ITDESQ26B ITDESQ325B ITDESQ335B ITDESQ36B

2.5"

1/4"

Impact Tough™

—

2.5" 3.5" 6" 2.5" 3.5" 6" 2.5" 3.5" 6" 2.5" 3.5" 6"

1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4"

Impact Impact Impact Impact Impact Impact Impact Impact Impact Impact Impact Impact

Tough™ Tough™ Tough™ Tough™ Tough™ Tough™ Tough™ Tough™ Tough™ Tough™ Tough™ Tough™

3 1 1 3 1 1 3 1 1 3 1 1

ITDET1525B ITDET1535B ITDET156B ITDET2025B ITDET2035B ITDET206B ITDET2525B ITDET2535B ITDET256B ITDET3025B ITDET3035B ITDET306B

2.5"

1/4"

Impact Tough™

—

2.5"

1/4"

Impact Tough™

—

DESCRIPTION Impact Tough™ 2" Bit Holder 1pk Impact Tough™ 2" Quick Change Bit Holder 1pk

POINT 1/4" 5/16" 3/8" 7/16" 1/2" 1/4", 5/16", 3/8" 1/4" 5/16" 3/8" 7/16" 1/2" 1/4", 5/16", 3/8"

LENGTH

SHANK

HARDNESS

PKG. QTY.

BULK ITEM#

1/4"

Impact Tough™

ITBH201B

1/4"

Impact Tough™

ITBHQC201B

SHANK 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4"

PKG. QTY. 1 1 1 1 1 3 1 1 1 1 1 3

BULK ITEM# ITNS14B ITNS516B ITNS38B ITNS716B ITNS12B — ITNS142B ITNS5162B ITNS382B ITNS7162B ITNS122B —

LENGTH 1-7/8" 1-7/8" 1-7/8" 1-7/8" 1-7/8" 1-7/8" 2-9/16" 2-9/16" 2-9/16" 2-9/16" 2-9/16" 2-9/16"

NOTE: Impact Tough™ bulk items can only be ordered in multiples of 5 or 10 depending on the item. Minimum quantities may apply.

172

BOSCHTOOLS.COM 877-BOSCH-99

2018/2019 POWER TOOLS & ACCESSORIES CATALOG

ITEM# ITSA14 ITSA38 ITSA12

SOCKET SET

SET

SIZE 3/16" 1/4" 5/16" 3/8" 7/16" 1/2" 9/16" 5/16" 3/8" 7/16" 1/2" 9/16" 5/8" 11/16" 3/4" 13/16" 7/8" 15/16" 5/16" 3/8" 7/16" 1/2" 9/16" 5/8" 11/16" 3/4" 13/16" 7/8" 15/16"

SIZE 1/4" hex to 1/4" socket adapter 1/4" hex to 3/8" socket adapter 1/4" hex to 1/2" socket adapter

ITEM#

# OF PIECES

27285

27286

ITEM#

# OF PIECES

SBID32

WELL DEPTH — — — — — — — Deep well Deep well Deep well Deep well Deep well Deep well Deep well Deep well Deep well Deep well Deep well Deep well Deep well Deep well Deep well Deep well Deep well Deep well Deep well Deep well Deep well Deep well

SHANK 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2"

WELL DEPTH

SHANK

—

1/4"

—

1/4"

—

1/4"

HARDNESS Impact Tough™ Impact Tough™ Impact Tough™ Impact Tough™ Impact Tough™ Impact Tough™ Impact Tough™ Impact Tough™ Impact Tough™ Impact Tough™ Impact Tough™ Impact Tough™ Impact Tough™ Impact Tough™ Impact Tough™ Impact Tough™ Impact Tough™ Impact Tough™ Impact Tough™ Impact Tough™ Impact Tough™ Impact Tough™ Impact Tough™ Impact Tough™ Impact Tough™ Impact Tough™ Impact Tough™ Impact Tough™ Impact Tough™

HARDNESS Impact Tough™ Impact Tough™ Impact Tough™

PKG. QTY. 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

BULK ITEM# — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

PKG. QTY.

BULK ITEM#

ITSA14B

ITSA38B

ITSA12B

SCREWDRIVER BITS

SOCKET ADAPTERS

ITEM# ITSO14316 ITSO1414 ITSO14516 ITSO1438 ITSO14716 ITSO1412 ITSO14916 27251 27254 27258 27259 27260 27261 27262 27263 27264 27268 27269 27271 27273 27274 27275 27276 27279 27280 27281 27282 27283 27284

DRILLING AND FASTENING

SOCKETS

INCLUDES HARDNESS CASE TYPE 3/8" drive: (1) 5/16", (1) 3/8", (1) 7/16", Impact Tough™ Brute Tough (1) 1/2", (1) 9/16", (1) 5/8", (1) 11/16", (1) 3/4" (1) 7/16", (1) 1/2", (1) 9/16", (1) 5/8", (1) 11/16", (1) 3/4", (1) 13/16", (1) 7/8", Impact Tough™ Brute Tough (1) 15/16"

INCLUDES HARDNESS CASE TYPE Insert Bits: (2) P1, (5) P2, (1) P2R, (3) P3, (1) R1, (3) R2, (1) R3, (1) T15, (2) T20, (2) T25, (1) T30; Impact Tough™ Hard plastic 2" Power Bits: (3) P2, (1) P3, (2) R2, (2) T25; 3.5" Power Bits: (1) P2R2, (1) magnetic bit holder

NOTE: Impact Tough™ bulk items can only be ordered in multiples of 5 or 10 depending on the item. Minimum quantities may apply.

173

PHILLIPS®

DRILLING AND FASTENING

SCREWDRIVER BITS

INSERT BITS

POWER BITS

POWER BITS ROUND BODY

MULTI-PACKS

PKG. ITEM # P1102 — — — — — — —

POINT P1 ribbed P1 P2 ribbed P2 P2 ribbed P2 P2R reduced P3

LENGTH 1" 1" 1" 1" 1" 2" 1" 1"

SHANK 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4"

HARDNESS Extra Extra Extra Extra Extra Extra Extra Extra

PKG. QTY. 2 — — — — — — —

BULK ITEM # — 27020 46005 27021 45913 27024 27036 27022

PKG. ITEM # P1201 — CCP2201 CCP2205 CCP2301 CCP2601 CCP3201

POINT P1 P1 P2 P2 P2 P2 P3

LENGTH 1-15/16" 2" 2" 2" 3-1/2" 6" 2"

SHANK 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4"

HARDNESS Extra Extra Extra Extra Extra Extra Extra

PKG. QTY. 1 — 1 5 1 1 1

BULK ITEM # — 27360 27361 — — 27370 27362

PKG. ITEM # — — — — — — — — — —

POINT P1 P1 P2 P2 P2 P2 P2 P3 P3 P3

ITEM# P2115TCB BBT25P2

POINT P2 P2 P2R reduced diameter

LENGTH 1" 1"

SHANK 1/4" 1/4"

HARDNESS Extra Extra

QTY. 15 25

PKG. TYPE Tic-tac Big-tac

1/4"

Extra

Big-tac

POINT P2R2 P2R2 P2R2 P2R2 P2R2

LENGTH 1" 1" 2" 1" 2"

SHANK 1/4" 1/4" 1/4" 1/4" 1/4"

HARDNESS Extra Extra Extra Extra Extra

QTY. 15 250 100 — 5

PKG. TYPE Tic-tac Cookie jar Cookie jar 27026 —

BBT25P2R

LENGTH 3-1/2" 6" 2-3/4" 3" 3-1/2" 4" 6" 2-3/4" 3-1/2" 6"

SHANK 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4"

HARDNESS Extra Extra Extra Extra Extra Extra Extra Extra Extra Extra

PKG. QTY. — — — — — — — — — —

BULK ITEM # 27366 45794 27364 28311 27367 28314 45625 27365 27368 45626

P2 + R2 MULTI-PACKS

ITEM# P2R2115TCB 43074 43075 — P2R22205

NOTE: Bulk items can be ordered in multiples of one where quantity is not noted. Minimum quantities may apply.

174

BOSCHTOOLS.COM 877-BOSCH-99

2018/2019 POWER TOOLS & ACCESSORIES CATALOG

POWER BITS

PKG. ITEM # — — —

POINT R1 R2 R3

LENGTH 1" 1" 1"

SHANK 1/4" 1/4" 1/4"

HARDNESS Extra Extra Extra

PKG. QTY. — — —

BULK ITEM # 29049 29050 29051

PKG. ITEM # CCSQ1201 SQ1301 — CCSQ2201 CCSQ2205 — SQ2301 — — CCSQ2601 — SQ3601

POINT R1 R1 R1 R2 R2 R2 R2 R2 R2 R2 R3 R3

LENGTH 2" 3" 6" 2" 2" 2-3/4" 3" 3-1/2" 4" 6" 2" 6"

SHANK 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4"

HARDNESS Extra Extra Extra Extra Extra Extra Extra Extra Extra Extra Extra Extra

PKG. QTY. 1 1 — 1 5 — 1 — — 1 — 1

BULK ITEM # 29052 — 39957 29053 29053 29056 — 39947 39953 39959 29054 —

PKG. ITEM # — — — — — — — —

POINT 0–1 1–2 2–3 3–4 5–6 6–8 8–10 12–14

LENGTH 1" 1" 1" 1" 1" 1" 1" 1"

SHANK 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4"

HARDNESS Extra Extra Extra Extra Extra Extra Extra Extra

PKG. QTY. — — — — — — — —

BULK ITEM # 41175 41176 41177 41178 39535 39536 39537 39539

PKG. ITEM # — — —

POINT 4–5 6–8 6–8

LENGTH 1-15/16" 1-15/16" 3-1/2"

SHANK 1/4" 1/4" 1/4"

HARDNESS Extra Extra Extra

PKG. QTY. — — —

BULK ITEM # 27463 27465 27483

SLOTTED

INSERT BITS

POWER BIT

DRILLING AND FASTENING

INSERT BITS

SCREWDRIVER BITS

SQUARE AND SQUARE RECESS

NOTE: Bulk items can be ordered in multiples of one where quantity is not noted. Minimum quantities may apply.

175

TORX®

INSERT BITS

PKG. ITEM # — TX1015102 — — TX27102G — —

POINT T15 T10, T15 T20 T25 T27 T30 T40 T10, T15, T20, T25, T30, T40

LENGTH 1" 1" 1" 1" 1" 1" 1"

SHANK 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4"

HARDNESS Extra Extra Extra Extra Extra Extra Extra

PKG. QTY. — 2 — — 2 — —

BULK ITEM # 37159 — 37161 37163 37165 37167 37169

1/4"

Extra

6 (set)

—

PKG. ITEM # —

POINT T45

LENGTH 1-1/4"

SHANK 5/16"

HARDNESS Extra

PKG. QTY. —

BULK ITEM # 37175

PKG. ITEM # — — — — — TX25201M — — — — —

POINT T15 T20 T20 T20 T20 T25 T25 T25 T30 T30 T40

LENGTH 1-15/16" 1-15/16" 2-3/4" 3-1/2" 6" 1-15/16" 2-3/4" 6" 1-15/16" 6" 1-15/16"

SHANK 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4"

HARDNESS Extra Extra Extra Extra Extra Extra Extra Extra Extra Extra Extra

PKG. QTY. – – — — – 1 — — — — –

BULK ITEM # 37717 37719 37735 37751 37767 37721 37737 37769 37725 37773 37727

DRILLING AND FASTENING

SCREWDRIVER BITS

CC90396

INSERT BIT 5/16" SHANK POWER BITS

TORX® SECURITY

INSERT BITS

PKG. ITEM # — — — — — — — — — — CC60391

POINT T7H T8H T9H T10H T15H T20H T25H T27H T30H T40H T10H, T15H, T20H, T25H, T27H, T30H

LENGTH 1" 1" 1" 1" 1" 1" 1" 1" 1" 1"

SHANK 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4"

HARDNESS Extra Extra Extra Extra Extra Extra Extra Extra Extra Extra

PKG. QTY. — — — — — — — — — —

BULK ITEM # 38911 38338 38340 38342 38344 38346 38348 38350 38352 38354

1/4"

Extra

6 (set)

—

NOTE: Bulk items can be ordered in multiples of one where quantity is not noted. Minimum quantities may apply.

176

BOSCHTOOLS.COM 877-BOSCH-99

2018/2019 POWER TOOLS & ACCESSORIES CATALOG

PKG. ITEM # — — — —

POINT T15W T20W T25W T30W

LENGTH 1-15/16" 1-15/16" 1-15/16" 1-15/16"

SHANK 1/4" 1/4" 1/4" 1/4"

HARDNESS Extra Extra Extra Extra

PKG. QTY. — — — —

BULK ITEM # 38375 38377 38379 38383

SOCKET 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 3/8" 3/8" 3/8" 3/8" 3/8" 1/2"

HARDNESS Extra Extra Extra Extra Extra Extra Extra Extra Extra Extra Extra Extra

PKG. QTY. — — — — — — — — — — — —

BULK ITEM # 38689 38690 38691 38692 38693 38694 38695 38696 40651 38697 38860 44217

TORX® FEMALE SOCKET DRIVE

SOCKET DRIVE SCREW BITS

PKG. ITEM # — — — — — — — — — — — —

POINT T10 T15 T20 T25 T27 T30 T40 T45 T47 T50 T55 T60

LENGTH 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1"

DRILLING AND FASTENING

POWER BITS

SCREWDRIVER BITS

TORX® ALIGN (WEDGE)

NOTE: Bulk items can be ordered in multiples of one where quantity is not noted. Minimum quantities may apply.

177

ALLEN®

INSERT BITS

PKG. ITEM # — — — — — — — — —

DRILLING AND FASTENING

SCREWDRIVER BITS

CC60392

POWER BITS

POINT 5/64" 5/32"

LENGTH 1" 1" 1" 1" 1" 1" 1" 1" 1"

SHANK 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4"

HARDNESS Extra Extra Extra Extra Extra Extra Extra Extra Extra

PKG. QTY. — — — — — — — — —

BULK ITEM # 27096 27097 37475 37476 27099 27100 27101 27102 27103

1/4"

Extra

6 (set)

—

LENGTH 1-15/16" 1-15/16"

SHANK 1/4" 1/4"

HARDNESS Extra Extra

PKG. QTY. — —

BULK ITEM # 27421 27424

ALLEN® SECURITY

INSERT BITS

178

PKG. ITEM # — —

POINT 5/64" 3/32" 7/64" 9/64" 5/32" 3/16" 7/32" 1/4" 5/16" 5/64", 3/32", 1/8", 5/32", 3/16", 7/64"

BOSCHTOOLS.COM 877-BOSCH-99

PKG. ITEM # — — — — — — — —

POINT 1/8" 9/64" 5/32" 3/16" 7/32" 1/4" 5/16" 3/8"

LENGTH 1" 1" 1" 1" 1" 1" 1" 1"

SHANK 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4"

HARDNESS Extra Extra Extra Extra Extra Extra Extra Extra

PKG. QTY. — — — — — — — —

BULK ITEM # 35693 35694 35695 35696 35697 35698 35699 35701

2018/2019 POWER TOOLS & ACCESSORIES CATALOG

POWER BITS

PKG ITEM # — — —

POINT PZ1 PZ2 PZ3

LENGTH 1" 1" 1"

SHANK 1/4" 1/4" 1/4"

HARDNESS Extra Extra Extra

PKG. QTY. — — —

BULK ITEM # 27045 27046 27047

PKG ITEM # — — — —

POINT PZ2 PZ3 PZ1 PZ3

LENGTH 2" 2" 3-1/2" 6"

SHANK 1/4" 1/4" 1/4" 1/4"

HARDNESS Extra Extra Extra Extra

PKG. QTY. — — — —

BULK ITEM # 27381 27382 27386 27391

DRILLING AND FASTENING

INSERT BIT

SCREWDRIVER BITS

POZIDRIV®

179

TORQ-SET®

DRILLING AND FASTENING

SCREWDRIVER BITS

INSERT BITS

PKG. ITEM # — — — — — — — — —

POINT #0 #1 #2 #3 #4 #5 #6 #8 #10

LENGTH 1" 1" 1" 1" 1" 1" 1" 1" 1"

SHANK 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4"

HARDNESS Extra Extra Extra Extra Extra Extra Extra Extra Extra

PKG. QTY. — — — — — — — — —

BULK ITEM# 35395 35396 35397 35398 35399 35394 35401 35402 35403

PKG. ITEM # — — — — —

POINT #1 #2 #3 #4 #5

LENGTH 1" 1" 1" 1" 1"

SHANK 1/4" 1/4" 1/4" 1/4" 1/4"

HARDNESS Extra Extra Extra Extra Extra

PKG. QTY. — — — — —

BULK ITEM# 35410 35411 35412 35413 35414

PKG. QTY. — — —

BULK ITEM# 35422 35423 35424

TRI-WING®

INSERT BITS

SPANNER

INSERT BITS

PKG. ITEM # — — —

POINT #6 gold bit #8 gold bit #10 gold bit

LENGTH 1" 1" 1"

SHANK 1/4" 1/4" 1/4"

HARDNESS Extra Extra Extra

NOTE: Bulk items can be ordered in multiples of one where quantity is not noted. Minimum quantities may apply.

180

BOSCHTOOLS.COM 877-BOSCH-99

2018/2019 POWER TOOLS & ACCESSORIES CATALOG

CLUTCH G

INSERT BITS

PKG. ITEM# — — —

POINT C2 1/8" C3 5/32" C4 3/16"

LENGTH 1" 1" 1"

SHANK 1/4" 1/4" 1/4"

HARDNESS Extra Extra Extra

PKG. QTY. — — —

BULK ITEM# 27081 27082 27083

PKG. ITEM# FR2102

POINT F2

LENGTH 1"

SHANK 1/4"

HARDNESS Extra

PKG. QTY. 2

BULK ITEM# 37382

HARDNESS Extra Extra Extra Extra Extra Extra

PKG. QTY. 1 1 1 1 1 1

BULK ITEM # — — — — — —

DOUBLE ENDED DOUBLE END SCREW BITS

PKG. ITEM # DEBP28201 DEBP1P22501 DEBP222501 DEBR122501 DEBR232501 DEBT15202501

POINT P2–S8 P1–P2 P2–P2 R1–R2 R2–R3 T15–T20

LENGTH 1-7/8" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2"

SHANK 1/4" 1/4" 1/4" 1/4" 1/4" 1/4"

DRILLING AND FASTENING

INSERT BIT

SCREWDRIVER BITS

FREARSON®

NOTE: Bulk items can be ordered in multiples of one where quantity is not noted. Minimum quantities may apply.

181

NUTSETTERS HEX SHANK NUTSETTERS

DRILLING AND FASTENING

SCREWDRIVER BITS

QUICK-CHANGE NUTSETTERS

NO-ROUND NUTSETTERS

PKG. ITEM# NS141401U — — —

SIZE 1/4" 1/4" 5/16" 3/8"

LENGTH 1-7/16" 1-5/8" 1-5/8" 1-1/8"

MAGNETIC No No No Yes

HARDNESS Extra Extra Extra Extra

PKG. QTY. 1 — — —

BULK ITEM# — 24000 24001 38688

PKG. ITEM# — — — — — — — — — —

SIZE 8mm 1/4" 1/4" 5/16" 5/16" 5/16" 3/8" 3/8" 7/16" 7/16"

LENGTH 1-5/8" 1-5/8" 2-9/16" 1-5/8" 2-9/16" 6" 1-7/8" 2-9/16" 2" 2-9/16"

MAGNETIC Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes

HARDNESS Extra Extra Extra Extra Extra Extra Extra Extra Extra Extra

PKG. QTY. — — — — — — — — — —

BULK ITEM# 38328 31450 37582 31452 37583 38646 36165 37584 37893 38639

PKG. ITEM# NS11401 — NS51601 — NS3801

SIZE 1/4" 1/4" 5/16" 5/16" 3/8"

LENGTH 1-5/8" 2-9/16" 1-5/8" 2-9/16" 1-7/8"

MAGNETIC Yes Yes Yes Yes Yes

HARDNESS Extra Extra Extra Extra Extra

PKG. QTY. 1 — 1 — 1

BULK ITEM# — 61943 — 61944 —

NO-ROUND NUTSETTER SUPERIOR GRIP Contact point at middle of hex avoids stripping

NOTE: Bulk items can be ordered in multiples of one where quantity is not noted. Minimum quantities may apply.

SCREW SETTING ACCESSORIES Dimpler® for professional screw setting precision if a screw gun is not available. D60498

182

BOSCHTOOLS.COM 877-BOSCH-99

NOTE: For use with a drill only. Do not use with an impact driver.

ITEM # D60498 DWS2 DWS60497

DESCRIPTION Dimpler® drywall driver Drywall insert bit Drywall screw setter, #2 Phillips®

2018/2019 POWER TOOLS & ACCESSORIES CATALOG

PKG. ITEM # DESCRIPTION CC60491 Compact drive guide CC60493 Standard drive guide CC60482 2" magnetic bit tip holder CC60483 3" magnetic bit tip holder CC60486 6" magnetic bit tip holder — Standard with c-ring — Standard with c-ring — Standard with c-ring

LENGTH SHANK HARDNESS 3-1/4" 1/4" Extra 6" 1/4" Extra 2" 1/4" Extra 3-1/4" 1/4" Extra 6" 1/4" Extra 2-7/8" 1/4" Extra 4" 1/4" Extra 11" 1/4" Extra

PKG. QTY. 1 1 1 1 1 — — —

BULK ITEM # — — — — 27750 27690 27710 27792

PKG. ITEM # DESCRIPTION One-piece construction magnetic bit holder One-piece construction — magnetic bit holder One-piece construction CC60483 magnetic bit holder (without c-ring retainer)

LENGTH SHANK HARDNESS

PKG. QTY.

BULK ITEM #

2-1/8"

1/4"

Extra

—

40831

1/4"

Extra

—

40833

2-7/8"

1/4"

Extra

39972

HELIX INSERT BITS (SILICON BRONZE) BIT HOLDER

PKG. ITEM # DESCRIPTION Two-piece magnetic bit — holder with screw cap (silicon bronze)

LENGTH SHANK HARDNESS

PKG. QTY.

BULK ITEM #

—

38310

SCREW-CAP STYLE BIT HOLDER

PKG. ITEM # DESCRIPTION LENGTH SHANK HARDNESS Screw-cap style bit holder, 2-3/16" 1/4" Extra magnetic

PKG. QTY.

BULK ITEM #

—

26791

PKG. ITEM # DESCRIPTION 1/4" square drive socket — adapter × 1-1/8" 1/4" square drive socket — adapter × 2" 3/8" square drive socket — adapter × 2"

LENGTH SHANK HARDNESS

PKG. QTY.

BULK ITEM #

1-1/8"

1/4"

Extra

—

34609

1/4"

Extra

—

34610

3/8"

Extra

—

34611

PKG. ITEM # DESCRIPTION 1/4" square drive bit — holder × 1-1/8" for 1/4" hex bits 3/8" square drive bit — holder × 1-1/8" for 1/4" hex bits 3/8" square drive bit — holder × 1-3/8" for 5/16" hex bits 1/2" square drive bit — holder × 1-7/16" for 5/16" hex bits

LENGTH SHANK HARDNESS

PKG. QTY.

BULK ITEM #

1-1/8"

1/4"

Extra

—

31894

1-1/8"

3/8"

Extra

—

31895

1-3/8"

3/8"

Extra

—

31896

1-7/16"

1/2"

Extra

—

31897

ONE-PIECE CONSTRUCTION BIT HOLDERS

MALE SQUARE DRIVE FOR SOCKETS

FEMALE SQUARE DRIVE FOR SOCKETS

—

1/4"

Extra

DRILLING AND FASTENING

BIT HOLDERS

SCREWDRIVER BITS

BIT HOLDERS AND SCREWGUIDES

NOTE: Bulk items can be ordered in multiples of one where quantity is not noted. Minimum quantities may apply.

183

CUSTOM CASE SYSTEM

DRILLING AND FASTENING

SCREWDRIVER BITS

TOUGHEST BITS EASIEST SYSTEM

THE CASE FOR EFFICIENCY Out on the jobsite is no place to wrestle with a bit case. When you need a bit, you need it now. Right now. The Bosch Custom Case System for Impact Tough™ driver and black oxide bits allows you to take only the bits needed for the job at hand. The innovative bit management system offers tilt-in/tilt-out flexibility for greater efficiency and speed. And it’s built tough to withstand the drops and scrapes that happen on the jobsite every day. It’s time to manage your time better by managing your tools better. The Bosch Custom Case System for Impact Tough™ driver and black oxide drill bits can help.

IT’S ROBUST This is a tough case for tough bits. The Bosch Custom Case System for Impact Tough™ bits is built for real-world jobsite use. And that means it can stand up to drops, scratches and scrapes.

EASE TO USE The Bosch Custom Case System for Impact Tough™ bits makes access easy for you. Bits housed in convenient clips tilt in and out to make finding what you need fast.

184

BOSCHTOOLS.COM 877-BOSCH-99

2018/2019 POWER TOOLS & ACCESSORIES CATALOG

CUSTOMIZE YOUR OWN SYSTEM

Choose a case

Choose components

Insert selected components into desired case for the job at hand

# OF PIECES 8 8 8

ITEM # CCSPHV108 CCSPH2108 CCSSQV108

HARDNESS Impact Tough™ Impact Tough™ Impact Tough™

CCSTV108

Impact Tough™ 8

CCSV108 CCSPHV208 CCSPH2208 CCSSQV208

Impact Impact Impact Impact

CCSTV208

Impact Tough™ 8

CCSV208

Impact Tough™ 8

Tough™ Tough™ Tough™ Tough™

8 8 8 8

CCSDEPHV2504 Impact Tough™ 4 CCSDESQV2504 Impact Tough™ 4

CUSTOM CASES & STORAGE BOX SCREWDRIVING SETS

MIXED SETS

CCSDETV2504

Impact Tough™ 4

CCSDEV2504

Impact Tough™ 4

CCSNSV17804

Impact Tough™ 4

CCSDV08

Impact Tough™ 8

CCSDDV08

Impact Tough™ 8

ITEM # CCSCM CCSCL

CLIP LOCKS INCLUDES FILLED 1" Insert Bits: (2) PH1, (4) PH2, (2) PH3 1 1" Insert Bits: (8) PH2 1 1" Insert Bits: (2) R1, (4) R2, (2) R3 1 1" Insert Bits: (1) T15, (2) T20, (3) T25, (1) T30, 1 (1) T40 1" Insert Bits: (3) PH2, (2) R2, (3) T25 1 2" Power Bits: (2) PH1, (4) PH2, (2) PH3 2 2" Power Bits: (8) PH2 2 2" Power Bits: (2) R1, (4) R2, (2) R3 2 2" Power Bits: (1) T15, (2) T20, (3) T25, (1) T30, 2 (1) T40 2" Power Bits: (3) PH2, (2) R2, (3) T25 2 2.5" Double-Ended Bits: (1) PH1/PH1, (2) PH2/ 2 PH2, (1) PH3/PH3 2.5" Double-Ended Bits: (1) R1/R1, (2) R2/R2, 2 (1) R3/R3 2.5" Double-Ended Bits: (1) T15/T20, (2) T25/ 2 T25, (1) T25/T30 2.5" Double-Ended Bits: (1) PH2/PH2, (1) R2/ 2 R2, (1) T25/T25, (1) P2R2/P2R2 1-7/8" Magnetic Nutsetters: (1) 1/4", (1) 5/16", 2 (1) 3/8", (1) 7/16" Black Oxide Drill Bits: (2) 1/16", (2) 3/32", 3 (1) 1/8", (1) 5/32", (1) 3/16", (1) 1/4" 2" Power Bits: (2) PH2, (1) R2, (1) T20, (1) T25; 3 Black Oxide Drill Bits: (1) 1/8", (1) 3/16", (1) 1/4"

DESCRIPTION Single-sided case with clear front Double-sided case Clear storage box clips inside Custom Case System cases for safe storage CCSBOXX of loose items or can be used as a stand alone storage container

CLIP # OF LOCKS CLIP FILLED LOCKS ‒ 4 ‒ 8 1

‒

# OF HARDNESS PIECES INCLUDES 1" Insert Bits: (2) PH1, (3) PH2, (1) PH2R, (1) PH3, (1) P2R2, Impact SDMS24 24 (2) R1, (2) R2, (1) R3, (1) T15, (2) T20; 2" Power Bits: (2) PH2, Tough™ (2) R2, (2) T25, (1) T20; (1) standard bit holder 1" Insert Bits: (2) PH1, (5) PH2, (1) PH2R, (2) PH3, (2) P2R2, (2) R1, (3) R2, (2) R3, (2) T15, (1) T20, (2) T25, (2) T30, (2) T40; Impact SDMS44 44 2" Power Bits: (1) PH1, (2) PH2, (1) PH3, (2) R2, (1) R3, Tough™ (1) T15, (1) T20, (2) T25, (1) T30, (1) T40; 3.5" Power Bits: (1) PH2, (1) R2; (1) standard bit holder 1" Insert Bits: (2) PH1, (6) PH2, (2) PH2R, (2) PH3, (2) P2R2, (2) R1, (6) R2, (2) R3, (5) T15, (2) T20, (1) T25; 2" Power Impact SDMS48 48 Bits: (4) PH2, (1) PH3, (2) R2, (1) R3, (2) T20, (2) T25; 2.5" Tough™ Double-Ended Bits: (1) PH2/PH2, (1) R2/R2, (1) T25/T25; (1) standard bit holder

CASE TYPE

# OF HARDNESS PIECES INCLUDES 1" Insert Bits: (1) PH1, (2) PH2, (1) PH2R, (1) PH3, (1) P2R2, Impact (1) R1, (1) R2, (1) R3, (1) T20, (1) T20, (1) T25; 2" Power DDMS20 20 Tough™ Bits: (1) PH2, (1) R2, (1) T20, (1) T25; Black Oxide Drill Bits: (1) 1/8", (1) 3/16", (1) 1/4"; (1) standard bit holder 1" Insert Bits: (2) PH1, (4) PH2, (1) PH2R, (1) PH3, (2) P2R2, (1) R1, (4) R2, (1) R3, (1) T15, (2) T20, (3) T25, (1) T30, (1) T40; Impact DDMS40 40 2" Power Bits: (2) PH2, (1) PH3, (1) R2, (1) R3, (1) T25, Tough™ (1) T30; Black Oxide Drill Bits: (2) 1/16", (2) 3/32", (1) 1/8", (1) 5/32", (1) 3/16", (1) 1/4", (1) standard bit holder

CASE TYPE

ITEM #

DRILLING AND FASTENING

CLIPS AND COMPONENTS

SCREWDRIVER BITS

FAST. EFFICIENT. SIMPLE.

Hard plastic Hard plastic

Hard plastic

185

SETS

DRILLING AND FASTENING

SCREWDRIVER BITS

SBID32

186

CC2490

ITEM#

HARDNESS

SBID32L

Impact Tough™

T4021

Extra

T4030

Extra

48240

Extra

CC2100 CC2490 CC60467 CC90396 CC60392 T2442

Extra Extra Extra Extra Extra Extra

MS4034

6150

MS4041

Standard

MS4065

Standard

MS4091

Standard

BOSCHTOOLS.COM 877-BOSCH-99

T4021

# OF PIECES INCLUDES Insert Bits: (2) P1, (5) P2, (3) P3, (1) P2R, (1) R1, (3) R2, (1) R3, (1) T15, 32 (2) T20, (2) T25, (1) T30; 2" Power Bits: (3) P2, (1) P3, (2) R2, (2) T25; 3-1/2" Power Bit: (1) P2R2; Impact Tough™ Magnetic Nutsetter: (1) 1/4" (1) finder driver; Insert Bits: (7) P2, (4) R2, (1) SL6-8, (1) SL8-10, (1) SL10-12; 21 2" Power Bits: (3) P2- 2", (3) R2-2" 2" Power Bits: (2) P1, (6) P2, (3) P3, (5) R2, (3) R3, (2) T15, (2) T20, (2) T25, 30 (1) SL6-8, (1) SL8-10, (1) SL10-12; Magnetic Nutsetters: (1) 1/4", (1) 5/16" Insert Bits: (1) T9H, (1) T10H, (1) T15H, (1) T20H, (1) T25H, (1) T27H, (1) T30H, (1) T40H, (1) PZ2, (1) R1, (1) R2; Torq-Set®: (1) #5, (1) #8; Tri-Wing®: (1) #4, 29 (1) #5, (1) #6, (1) #8, (1) #10; Allen® Security: (1) 1/8", (1) 9/64", (1) 5/32", (1) 3/16", (1) 7/32", (1) 1/4", (1) 5/16", (1) 3/8"; (1) 7" magnetic screwdriver, (1) magnetic bit holder, (1) 1/4" socket adapter 5 (1) Click-Change chuck; Insert Bits: (1) P1, (2) P2, (1) R2 3 Magnetic Nutsetters: (1) 1/4", (1) 5/16", (1) 3/8" 2 Double-Ended Bits: (1) DEB P1/SL6-8, (1) DEB P2/SL8-10–3-1/2" length 6 Insert Bits: (1) T10, (1) T15, (1) T20, (1) T25, (1) T30, (1) T40 7 Insert Bits: (1) 9/64", (1) 5/64", (1) 3/32", (1) 1/8", (1) 5/32", (1) 3/16", (1) 7/64" 7 Nut Drivers: (1) 3/16", (1) 1/4", (1) 9/32", (1) 5/16", (1) 11/32", (1) 3/8", (1) 7/16" 1" Insert Bits: (1) P1, (1) P2, (1) P3, (1) PZ1, (1) PZ2, (1) PZ3, (1) SL4, (1) SL6, (1) SL7, (1) T15, (1) T20, (1) T25, (1) T30; (1) 2-1/2" bit holder; Sockets: (1) 3/16", 34 (1) 5/16", (1) 3/8"; (1) socket adapter; (1) countersink; Black Oxide Drill Bits: (2) 1/16", (1) 1/8", (1) 5/32", (1) 3/16"; Rotary Masonry Drill Bits: (1) 5/32", (2) 3/16", (1) 1/4", (1) 5/16"; Brad Point Bits: (1) 1/8", (2) 3/16", (1) 1/4", (1) 5/16" 1" Insert Screw Bits: (1) P1, (1) P2, (1) PZ1, (1) PZ2, (1) SL4, (1) SL5, (1) SL6, (1) T20, (1) H4, (1) H5, (1) H6; (1) bit holder; (1) double-ended screwdriver; Sockets: (1) 3/16", (1) 7/32", (1) 5/16", (1) 11/32", (1) 3/8", (1) 7/16"; (1) socket 41 adapter; (1) countersink; Black Oxide Drill Bits: (2) 1/16", (2) 1/8", (1) 5/32", (2) 3/16"; Rotary Masonry Drill Bits: (2) 5/32", (2) 3/16", (1) 1/4", (1) 5/16"; Brad Point Bits: (1) 1/8", (2) 3/16", (1) 1/4", (1) 5/16"; Spade Bits: (1) 5/8", (1) 3/4" 1" Insert Bits: (1) P0, (1) P1, (2) P2, (2) P3, (1) PZ0, (1) PZ1, (2) PZ2, (2) PZ3, (1) SL4, (1) SL6, (1) SL7, (1) T10, (1) T15, (1) T20, (1) T25, (1) T30, (1) T40, (1) H3, (1) H4, (1) H5, (1) H6; 2" Insert Bits: (1) P1, (1) P2, (1) P3, (1) PZ1, (2) PZ2, (1) PZ3, (1) SL4, (1) SL6, (1) T15, (1) T20, (1) T25, (1) T30; (1) socket adapter; 65 (1) 2-1/4" bit holder; Sockets: (1) 3/16", (1) 1/4", (1) 9/32", (1) 5/16", (1) 11/32", (1) 3/8", (1) 7/16", (1) 1/2"; Hex Shank Black Oxide Drill Bits: (1) 1/8", (2) 3/16", (2) 1/4", (2) 5/16", (1) 3/8"; Brad Point Bits: (1) 1/8", (2) 3/16", (2) 1/4", (2) 5/16", (1) 3/8"; (1) measuring tape 1" Insert Bits: (2) P0, (2) P1, (2) P2, (2) P3, (2) PZ0, (2) PZ1, (2) PZ2, (2) PZ3, (1) SL3, (2) SL5, (1) SL7, (2) T10, (2) T15, (2) T20, (2) T25, (1) T30, (1) T40, (1) H3, (2) H5, (1) H6; 2" Insert Bits: (1) P0, (1) P1, (1) P2, (1) P3, (1) PZ0, (1) PZ1, (1) PZ2, (1) PZ3, (1) SL6, (1) T10, (1) T15, (1) T20, (1) T25, (1) H5, (1) H6; Nut Setters: (1) 3/16", (2) 1/4", (1) 9/32", (1) 5/16", (1) 11/32", (1) 3/8", (1) 7/16"; 91 (1) countersink; (1) bit holder; (1) rachet screwdriver; (1) 25-1/2" magnetic extension pen; Titanium Drill Bits: (2) 1/16", (1) 7/64", (2) 1/8", (1) 9/64", (2) 5/32", (2) 3/16", (1) 1/4"; Rotary Masonry Drill Bits: (2) 1/8", (2) 5/32", (2) 3/16", (2) 1/4", (2) 5/16", (1) 3/8"; Brad Point Bits: (1) 1/8, (2) 3/16", (2) 1/4", (2) 5/16", (1) 3/8"

CASE TYPE Hard plastic Pouch Magnetic

Hard plastic — — — — — Hard plastic Hard plastic

Hard plastic

2018/2019 POWER TOOLS & ACCESSORIES CATALOG

HARDENED TO THE CORE ENGINEERED FOR HIGH TORQUE

Bosch Impact Tough™ screwdriver bits are engineered with an Xtended Torsion Zone, which helps absorb torque peaks and provides longer life versus standard impact bits. The proprietary Bosch manufacturing process incorporates heat-treated, high-quality materials to improve the bit strength and maximum torque. Bosch Impact Tough™ bits — enhanced to handle a new generation of higher-torque impact drivers.

187

METAL DRILL BITS The Bosch line of metal drill bits offers a solution for every professional application. Each bit is manufactured to exacting specifications and features split points that deliver fast, easy starts. Bosch metal drill bits also reduce bit walking and eliminate a center punch requirement.

DRILLING AND FASTENING

METAL DRILL BITS

BLACK OXIDE FOR GENERAL-PURPOSE DRILLING ff No-skate tip for fast, easy starts that reduce bit walking ff Available in jobber length, stubby length, extended length (aircraft) and 1/2 In. reduced shank (Silver and Deming)

TITANIUM FOR HEAVY-DUTY REPETITIVE DRILLING ff Lasts up to 2× longer than high-speed steel bits ff Surface hardened to penetrate tough materials ff Available in jobber length with 3/8 In. reduced shank

COBALT FOR HEAVY-DUTY DRILLING IN EXTREMELY HARD OR ABRASIVE MATERIALS ff Withstands high-temperature applications for extended periods of time (up to 1,100°F) ff Thick web design adds stability to bit in tough applications ff Surface hardened to penetrate tough abrasive materials ff Available in jobber length, full shank

MATERIAL CHART WOOD

PLASTIC

LIGHT GAUGE METAL

HIGH CARBON STEEL

ALUMINUM AND ALLOY STEEL

CAST IRON

STAINLESS STEEL

BLACK OXIDE

TITANIUM

COBALT

DAREDEVIL® MULTIPURPOSE*

= Recommended

= Acceptable = Not Recommended

* Daredevil® Multipurpose drill bits are available on page 8

188

BOSCHTOOLS.COM 877-BOSCH-99

2018/2019 POWER TOOLS & ACCESSORIES CATALOG

IMPACT TOUGH™ DRILL BITS LONG FLUTE For most effective removal and universal drilling

IMPACT TOUGH™ DRILL BITS ITEM# BL2131IM BL2132IM BL2133IM BL2134IM BL2135IM BL2136IM BL2137IM BL2138IM BL2139IM BL2140IM BL2141IM BL2143IM BL2147IM BL2151IM BL2155IM BL2159IM TI2131IM TI2132IM TI2133IM TI2134IM TI2135IM TI2136IM TI2137IM TI2138IM TI2139IM TI2140IM TI2141IM TI2143IM TI2147IM TI2151IM TI2155IM TI2159IM

COATING Black Oxide Black Oxide Black Oxide Black Oxide Black Oxide Black Oxide Black Oxide Black Oxide Black Oxide Black Oxide Black Oxide Black Oxide Black Oxide Black Oxide Black Oxide Black Oxide Titanium Titanium Titanium Titanium Titanium Titanium Titanium Titanium Titanium Titanium Titanium Titanium Titanium Titanium Titanium Titanium

QUANTITY 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

DIAMETER 1/16" 5/64" 3/32" 7/64" 1/8" 9/64" 5/32" 11/64" 3/16" 13/64" 7/32" 1/4" 5/16" 3/8" 7/16" 1/2" 1/16" 5/64" 3/32" 7/64" 1/8" 9/64" 5/32" 11/64" 3/16" 13/64" 7/32" 1/4" 5/16" 3/8" 7/16" 1/2"

OVERALL LENGTH 1-7/8" 2" 2-1/4" 2-5/8" 2-3/4" 2-7/8" 3-1/8" 3-1/4" 3-1/2" 3-5/8" 3-3/4" 4" 4-1/2" 5" 5-1/2" 6" 1-7/8" 2" 2-1/4" 2-5/8" 2-3/4" 2-7/8" 3-1/8" 3-1/4" 3-1/2" 3-5/8" 3-3/4" 4" 4-1/2" 5" 5-1/2" 6"

SHANK 1/4" hex 1/4" hex 1/4" hex 1/4" hex 1/4" hex 1/4" hex 1/4" hex 1/4" hex 1/4" hex 1/4" hex 1/4" hex 1/4" hex 1/4" hex 1/4" hex 1/4" hex 1/4" hex 1/4" hex 1/4" hex 1/4" hex 1/4" hex 1/4" hex 1/4" hex 1/4" hex 1/4" hex 1/4" hex 1/4" hex 1/4" hex 1/4" hex 1/4" hex 1/4" hex 1/4" hex 1/4" hex

BULK ITEM BL4131IM BL4132IM BL4133IM BL4134IM BL4135IM BL4136IM BL4137IM BL4138IM BL4139IM BL4140IM BL4141IM BL4143IM BL4147IM BL4151IM BL4155IM BL4159IM TI4131IM TI4132IM TI4133IM TI4134IM TI4135IM TI4136IM TI4137IM TI4138IM TI4139IM TI4140IM TI4141IM TI4143IM TI4147IM TI4151IM TI4155IM TI4159IM

BULK QTY. 12 12 12 12 12 12 12 12 12 12 12 12 6 6 6 6 12 12 12 12 12 12 12 12 12 12 12 12 6 6 6 6

METAL DRILL BITS

BLACK OXIDE AND TITANIUM COATINGS For longer life

DRILLING AND FASTENING

IMPACT-RATED SHANK For use in both drills and impact drivers

NO-SKATE TIP For fast, easy starts that reduce bit walking

NOTE: 1/16"–7/64": 118° point; 1/8" and larger: 135° point; all 1/4" hex shank

IMPACT TOUGH™ DRILL BIT SETS ITEM# BL5IM BL9IM TI5IM TI9IM

COATING Black Oxide Black Oxide Titanium Titanium

# OF PIECES 5 9 5 9

INCLUDES 3/32", 1/8", 5/32", 3/16", 1/16", 3/32", 1/8", 5/32", 3/32", 1/8", 5/32", 3/16", 1/16", 3/32", 1/8", 5/32",

1/4" 3/16", 7/32", 1/4", 5/16", 3/8" 1/4" 3/16", 7/32", 1/4", 5/16", 3/8"

CASE TYPE Plastic tube — Plastic tube —

189

BLACK OXIDE DRILL BITS

DRILLING AND FASTENING

METAL DRILL BITS

FRACTIONAL JOBBER LENGTH BLACK OXIDE DRILL BITS

ITEM# BL2131 BL2132 BL2133 BL2134 BL2135 BL2136 BL2137 BL2138 BL2139 BL2140 BL2141 BL2142 BL2143 BL2144 BL2145 BL2146 BL2147 BL2148 BL2149 BL2150 BL2151 BL2152 BL2153 BL2154 BL2155 BL2156 BL2157 BL2158 BL2159

QTY. 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

DIAMETER 1/16" 5/64" 3/32" 7/64" 1/8" 9/64" 5/32" 11/64" 3/16" 13/64" 7/32" 15/64" 1/4" 17/64" 9/32" 19/64" 5/16" 21/64" 11/32" 23/64" 3/8" 25/64" 13/32" 27/64" 7/16" 29/64" 15/32" 31/64" 1/2"

OVERALL LENGTH SHANK 1-7/8" 1/16" 2" 5/64" 2-1/4" 3/32" 2-5/8" 7/64" 2-3/4" 1/8" 2-7/8" 9/64" 3-1/8" 5/32" 3-1/4" 11/64" 3-1/2" 3/16" 3-5/8" 13/64" 3-3/4" 7/32" 3-7/8" 15/64" 4" 1/4" 4-1/8" 17/64" 4-1/4" 9/32" 4-3/8" 19/64" 4-1/2" 5/16" 4-5/8" 21/64" 4-3/4" 11/32" 4-7/8" 23/64" 5" 3/8" 5-1/8" 3/8" 5-1/4" 3/8" 5-3/8" 3/8" 5-1/2" 3/8" 5-5/8" 3/8" 5-3/4" 3/8" 5-7/8" 3/8" 6" 3/8"

EXTRA LENGTH (AIRCRAFT) BLACK OXIDE DRILL BITS (CONTINUED)

BULK ITEM# BL4131 BL4132 BL4133 BL4134 BL4135 BL4136 BL4137 BL4138 BL4139 BL4140 BL4141 BL4142 BL4143 BL4144 BL4145 BL4146 BL4147 BL4148 BL4149 BL4150 BL4151 BL4152 BL4153 BL4154 BL4155 BL4156 BL4157 BL4158 BL4159

BULK QTY. 12 12 12 12 12 12 12 12 12 12 12 12 12 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6

NOTE: 1/64"–7/64": 118° point; 1/8" and larger: 135° point; three flat shank 3/16" and larger

EXTRA LENGTH (AIRCRAFT) BLACK OXIDE DRILL BITS ITEM# BL2631 BL2731 BL2632 BL2633 BL2634 BL2635 BL2735 BL2636 BL2637 BL2638 BL2639 BL2739 BL2640 BL2641 BL2642 BL2643 BL2743

190

QUANTITY 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

BOSCHTOOLS.COM 877-BOSCH-99

DIAMETER 1/16" 1/16" 5/64" 3/32" 7/64" 1/8" 1/8" 9/64" 5/32" 11/64" 3/16" 3/16" 13/64" 7/32" 15/64" 1/4" 1/4"

OVERALL LENGTH 6" 12" 6" 6" 6" 6" 12" 6" 6" 6" 6" 12" 6" 6" 6" 6" 12"

SHANK 1/16" 1/16" 5/64" 3/32" 7/64" 1/8" 1/8" 9/64" 5/32" 11/64" 3/16" 3/16" 13/64" 7/32" 15/64" 1/4" 1/4"

ITEM# BL2647 BL2747 BL2651 BL2751 BL2655 BL2755 BL2759

QUANTITY 1 1 1 1 1 1 1

DIAMETER 5/16" 5/16" 3/8" 3/8" 7/16" 7/16" 1/2"

OVERALL LENGTH 6" 12" 6" 12" 6" 12" 12"

SHANK 5/16" 5/16" 3/8" 3/8" 7/16" 7/16" 1/2"

NOTE: 3/64"–7/64": 118° tip; 1/8" and larger: 135° point; all round shank

FRACTIONAL 1/2" REDUCED SHANK (SILVER & DEMING) BLACK OXIDE DRILL BITS

ITEM# BL2160 BL2161 BL2162 BL2163 BL2164 BL2165 BL2166 BL2167 BL2168 BL2169 BL2171 BL2172 BL2175 BL2176 BL2177 BL2179 BL2183 BL2187 BL2191 BL2195 BL2199 BL2203 BL2207 BL2215 BL2223

QUANTITY 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

DIAMETER 33/64" 17/32" 35/64" 9/16" 37/64" 19/32" 39/64" 5/8" 41/64" 21/32" 11/16" 45/64" 3/4" 49/64" 25/32" 13/16" 7/8" 15/16" 1" 1-1/16" 1-1/8" 1-3/16" 1-1/4" 1-3/8" 1-1/2"

OVERALL LENGTH 6" 6" 6" 6" 6" 6" 6" 6" 6" 6" 6" 6" 6" 6" 6" 6" 6" 6" 6" 6" 6" 6" 6" 6" 6"

SHANK 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2"

NOTE: 135° point; all round shank

2018/2019 POWER TOOLS & ACCESSORIES CATALOG

QUANTITY 12 12 12 12 12 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6

DIAMETER A B C D E H I J K L M N P Q R S T U V X Y Z

OVERALL LENGTH 3-7/8" 4" 4" 4" 4" 4-1/8" 4-1/8" 4-1/8" 4-1/4" 4-1/4" 4-3/8" 4-3/8" 4-5/8" 4-3/4" 4-3/4" 4-7/8" 4-7/8" 5" 5" 5-1/8" 5-1/4" 5-1/4"

SHANK 0.2340" 0.2380" 0.2420" 0.2460" 0.2500" 0.2660" 0.2720" 0.2770" 0.2810" 0.2900" 0.2950" 0.3020" 0.3230" 0.3320" 0.3390" 0.3480" 0.3580" 0.3680" 0.3770" 0.3970" 0.4040" 0.4130"

NOTE: All 135° points; all round shank

FRACTIONAL DOUBLE-END BLACK OXIDE DRILL BITS (BULK)

ITEM# BL6134 BL6135 BL6136 BL6137 BL6139 BL6141 BL6143

QUANTITY 12 12 12 12 12 12 12

DIAMETER 7/64" 1/8" 9/64" 5/32" 3/16" 7/32" 1/4"

OVERALL LENGTH 1-15/16" 2-1/8" 2-5/32" 2-5/32" 2-5/16" 2-5/16" 2-5/16"

SHANK 7/64" 1/8" 9/64" 5/32" 3/16" 7/32" 1/4"

NOTE: All 135° points

WIRE GAUGE DOUBLE-END BLACK OXIDE DRILL BITS (BULK) ITEM# BL6011 BL6020 BL6030

QUANTITY 12 12 12

NOTE: All 135° points

DIAMETER 11 20 30

OVERALL LENGTH 2-5/16" 2-5/32" 2-1/8"

SHANK 0.1910" 0.1610" 0.1285"

ITEM# BL4001 BL4002 BL4003 BL4004 BL4005 BL4006 BL4007 BL4008 BL4009 BL4010 BL4011 BL4012 BL4013 BL4014 BL4015 BL4016 BL4017 BL4018 BL4019 BL4020 BL4021 BL4022 BL4023 BL4025 BL4026 BL4027 BL4028 BL4029 BL4030 BL4031 BL4032 BL4033 BL4034 BL4035 BL4036 BL4037 BL4038 BL4039 BL4040 BL4041 BL4042 BL4043 BL4044 BL4046 BL4047 BL4048 BL4049 BL4050 BL4051 BL4052 BL4053 BL4054 BL4055 BL4056 BL4057 BL4058 BL4059 BL4060

QUANTITY 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12

DIAMETER 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

OVERALL LENGTH 3-7/8" 3-7/8" 3-3/4" 3-3/4" 3-3/4" 3-3/4" 3-5/8" 3-5/8" 3-5/8" 3-5/8" 3-1/2" 3-1/2" 3-1/2" 3-3/8" 3-3/8" 3-3/8" 3-3/8" 3-1/4" 3-1/4" 3-1/4" 3-1/4" 3-1/8" 3-1/8" 3" 3" 3" 2-7/8" 2-7/8" 2-3/4" 2-3/4" 2-3/4" 2-5/8" 2-5/8" 2-5/8" 2-1/2" 2-1/2" 2-1/2" 2-3/8" 2-3/8" 2-3/8" 2-1/4" 2-1/4" 2-1/8" 2-1/8" 2" 2" 2" 2" 2" 1-7/8" 1-7/8" 1-7/8" 1-7/8" 1-3/4" 1-3/4" 1-5/8" 1-5/8" 1-5/8"

SHANK 0.2280" 0.2210" 0.2130" 0.2090" 0.2055" 0.2040" 0.2010" 0.1990" 0.1960" 0.1935" 0.1910" 0.1890" 0.1850" 0.1820" 0.1800" 0.1770" 0.1730" 0.1695" 0.1660" 0.1610" 0.1590" 0.1570" 0.1540" 0.1495" 0.1470" 0.1440" 0.1405" 0.1360" 0.1285" 0.1200" 0.1160" 0.1130" 0.1110" 0.1100" 0.1065" 0.1040" 0.1015" 0.0995" 0.0980" 0.0960" 0.0935" 0.0890" 0.0860" 0.0810" 0.0785" 0.0760" 0.0730" 0.0700" 0.0670" 0.0635" 0.0595" 0.0550" 0.0520" 0.0465" 0.0430" 0.0420" 0.0410" 0.0400"

METAL DRILL BITS

ITEM# BL4201 BL4202 BL4203 BL4204 BL4205 BL4208 BL4209 BL4210 BL4211 BL4212 BL4213 BL4214 BL4216 BL4217 BL4218 BL4219 BL4220 BL4221 BL4222 BL4224 BL4225 BL4226

WIRE GAUGE BLACK OXIDE DRILL BITS (BULK)

DRILLING AND FASTENING

LETTER SIZE BLACK OXIDE DRILL BITS (BULK)

NOTE: 3 1–60: 118° point; 1–30: 135° point

191

BLACK OXIDE DRILL BIT SETS

DRILLING AND FASTENING

METAL DRILL BITS

BL14

192

BL21A

BL0026 ITEM# BL14

# OF PIECES 14

BL21A

BL29

BL0026 BL0060

26 60

BOSCHTOOLS.COM 877-BOSCH-99

BL29

BL0060

INCLUDES 1/16", 5/64", 3/32", 7/64", (2) 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8", 1/2" (2) 1/16", (2) 5/64", 3/32", 7/64", (2) 1/8", 9/64", 5/32", 11/64", (2) 3/16", 13/64", 7/32", 15/64", (2) 1/4", 5/16", 3/8", 1/2" 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 11/64", 3/16", 13/64", 7/32", 15/64", 1/4", 17/64", 9/32", 19/64", 5/16", 21/64", 11/32", 23/64", 3/8", 25/64", 13/32", 27/64", 7/16", 29/64", 15/32", 31/64", 1/2" Letter size jobber length A to Z Wire gauge jobber length sizes #1 to #60

CASE TYPE Clear front Clear front Clear front Metal index Metal index

2018/2019 POWER TOOLS & ACCESSORIES CATALOG

TITANIUM DRILL BITS TITANIUM-COATED DRILL BITS

DIAMETER 1/16" 5/64" 3/32" 7/64" 1/8" 9/64" 5/32" 11/64" 3/16" 13/64" 7/32" 15/64" 1/4" 17/64" 9/32" 19/64" 5/16" 21/64" 11/32" 23/64" 3/8" 25/64" 13/32" 27/64" 7/16" 29/64" 15/32" 31/64" 1/2"

OVERALL LENGTH SHANK 1-7/8" 1/16" 2" 5/64" 2-1/4" 3/32" 2-5/8" 7/64" 2-3/4" 1/8" 2-7/8" 9/64" 3-1/8" 5/32" 3-1/4" 11/64" 3-1/2" 3/16" 3-5/8" 13/64" 3-3/4" 7/32" 13-7/8" 15/64" 4" 1/4" 4-1/8" 17/64" 4-1/4" 9/32" 4-3/8" 19/64" 4-1/2" 5/16" 4-5/8" 21/64" 4-3/4" 11/32" 4-7/8" 23/64" 5" 3/8" 5-1/8" 3/8" 5-1/4" 3/8" 5-3/8" 3/8" 5-1/2" 3/8" 5-5/8" 3/8" 5-3/4" 3/8" 5-7/8" 3/8" 6" 3/8"

BULK ITEM# TI4131 TI4132 TI4133 TI4134 TI4135 TI4136 TI4137 TI4138 TI4139 TI4140 TI4141 TI4142 TI4143 TI4144 TI4145 TI4146 TI4147 TI4148 TI4149 TI4150 TI4151 TI4152 TI4153 TI4154 TI4155 TI4156 TI4157 TI4158 TI4159

BULK QTY. 12 12 12 12 12 12 12 12 12 12 12 12 12 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6

METAL DRILL BITS

QTY. 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

DRILLING AND FASTENING

ITEM# TI2131 TI2132 TI2133 TI2134 TI2135 TI2136 TI2137 TI2138 TI2139 TI2140 TI2141 TI2142 TI2143 TI2144 TI2145 TI2146 TI2147 TI2148 TI2149 TI2150 TI2151 TI2152 TI2153 TI2154 TI2155 TI2156 TI2157 TI2158 TI2159

NOTE: 1/16"–7/64": 118° point; 1/8" and larger: 135° point; three flat shank 3/16" and larger

TITANIUM-COATED DRILL BIT SETS

TI14 ITEM# TI14

# OF PIECES 14

TI21A

TI29

TI21

TI29

CASE TYPE Clear front Clear front Clear front

193

COBALT DRILL BITS

DRILLING AND FASTENING

METAL DRILL BITS

COBALT DRILL BITS

194

ITEM# QTY. DIAMETER — — 1/64" — — 1/32" — — 3/64" CO2131 1 1/16" CO2132 1 5/64" CO2133 1 3/32" CO2134 1 7/64" CO2135 1 1/8" CO2136 1 9/64" CO2137 1 5/32" CO2138 1 11/64" CO2139 1 3/16" CO2140 1 13/64" CO2141 1 7/32" CO2142 1 15/64" CO2143 1 1/4"

OVERALL LENGTH 3/4" 1-3/8" 1-3/4" 1-7/8" 2" 2-1/4" 2-5/8" 2-3/4" 2-7/8" 3-1/8" 3-1/4" 3-1/2" 3-5/8" 3-3/4" 3-7/8" 4"

SHANK 1/64" 1/32" 3/64" 1/16" 5/64" 3/32" 7/64" 1/8" 9/64" 5/32" 11/64" 3/16" 13/64" 7/32" 15/64" 1/4"

BULK ITEM# CO4128 CO4129 CO4130 CO4131 CO4132 CO4133 CO4134 CO4135 CO4136 CO4137 CO4138 CO4139 CO4140 CO4141 CO4142 CO4143

BULK QTY. 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12

ITEM# QTY. DIAMETER CO2144 1 17/64" CO2145 1 9/32" CO2146 1 19/64" CO2147 1 5/16" CO2148 1 21/64" CO2149 1 11/32" CO2150 1 23/64" CO2151 1 3/8" CO2152 1 25/64" CO2153 1 13/32" CO2154 1 27/64" CO2155 1 7/16" CO2156 1 29/64" CO2157 1 15/32" CO2158 1 31/64" CO2159 1 1/2"

OVERALL LENGTH 4-1/8" 4-1/4" 4-3/8" 4-1/2" 4-5/8" 4-3/4" 4-7/8" 5" 5-1/8" 5-1/4" 5-3/8" 5-1/2" 5-5/8" 5-3/4" 5-7/8" 6"

SHANK 17/64" 9/32" 19/64" 5/16" 21/64" 11/32" 23/64" 3/8" 25/64" 13/32" 27/64" 7/16" 29/64" 15/32" 31/64" 1/2"

BULK ITEM# CO4144 CO4145 CO4146 CO4147 CO4148 CO4149 CO4150 CO4151 CO4152 CO4153 CO4154 CO4155 CO4156 CO4157 CO4158 CO4159

BULK QTY. 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6

NOTE: 1/64"–7/64": 118° point; 1/8" and larger: 135° point; three flat shank 3/16" and larger

COBALT DRILL BIT SETS

CO14 ITEM# CO14

# OF PIECES 14

CO21

BOSCHTOOLS.COM 877-BOSCH-99

CO21 INCLUDES 1/16", 5/64", 3/32", 7/64", (2) 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8", 1/2" (2) 1/16", (2) 5/64", 3/32", 7/64", (2) 1/8", 9/64", 5/32", 11/64", (2) 3/16", 13/64", 7/32", 15/64", (2) 1/4", 5/16", 3/8", 1/2"

CASE TYPE Clear front Clear front

2018/2019 POWER TOOLS & ACCESSORIES CATALOG

COUNTERSINKS HIGH-SPEED STEEL COUNTERSINKS ITEM# CSH1C CSH2C CSH3C

DIAMETER 1/2" 5/8" 3/4"

CHAMFER ANGLE 82° 82° 82°

TITANIUM-COATED COUNTERSINKS NUMBER OF FLUTES 5 5 5

SHANK 1/4" 1/4" 1/4"

ITEM# CST1 CST2 CST3

DIAMETER 1/2" 5/8" 3/4"

CHAMFER ANGLE 82° 82° 82°

SHANK 1/4" 1/4" 1/4"

NUMBER OF FLUTES 5 5 5

NOTE: Drill bits (or extension + drill bit) in excess of 8" should never exceed 600 RPM

DRILLING AND FASTENING

The Bosch line of step drill bits offer the ability to drill multiple holes with a single bit. Cuts are clean and accurate even in the toughest material; ideal for electrical, plumbing and HVAC contractors.

METAL DRILL BITS

STEP DRILL BITS SELF-STARTING POINT Starts on contact BALANCE DOUBLE FLUTE Eliminates chatter and vibration RESHARPENABLE CUTTING EDGE Provides longer tool life

THREE-FLAT SHANK For reduced slippage

SUPER-HARD TITANIUM COATING Lasts up to 6× longer than high-speed steel

TITANIUM

HIGH-SPEED STEEL

IMPACT TOUGH™ STEP DRILL BITS

ITEM#

DIAMETER (INCREMENTS)

STEP DEPTH

NUMBER OF HOLE SIZES

IMSD46401

1/8"–1/2" (1/32")

1/8"

IMSD46403

1/4"–3/4" (1/16")

3/8"

IMSD46405

1/4"–7/8"–1-1/8"

5/32"

SHANK DIAMETER APPLICATION 1/4" hex with All common drilling needs power groove 1/4" hex with Ideal for cutting medium size holes power groove 1/4" hex with For 1/2" and 3/4" conduit power groove

POINT TYPE Self-starting Self-starting Self-starting

NOTE: Drill bits (or extension + drill bit) in excess of 8" should never exceed 600 RPM

195

HIGH-SPEED STEEL STEP DRILL BITS

ITEM# SDH1 SDH6 SDH2 SDH3 SDH4 SDH10 SDH8

DIAMETER (INCREMENTS) 1/8"–1/2" (1/32") 3/16"–1/2" (1/16") 3/16"–7/8" (1/16") 1/4"–3/4" (1/16") 1/4"–7/8"–1-1/8" 1/4"–1-3/8" (1/8") 1/2"

STEP DEPTH 1/8" 3/8" 1/8" 1/8" 5/32" 1/8" —

NUMBER OF HOLE SIZES 13 6 12 9 3 10 1

SHANK DIAMETER 1/4" 1/4" 3/8" 3/8" 3/8" 3/8" 1/4"

SDH7

9/16"–1" (1/16")

1/8"

3/8"

SDH9

13/16"–1-3/8" (1/16") 1/8"

1/2"

SDH5

7/8"

3/8"

—

APPLICATION All common drilling needs All common drilling needs All common drilling needs Ideal for cutting medium size holes For 1/2" and 3/4" conduit For 1" conduit and tubing Knockout Companion bit to SDH1 for diameter range 1/8" to 1" (requires 1/2" pilot hole) For 1" conduit and tubing (requires 3/4" pilot hole) Drill perfect size holes for conduit. Ideal for drawbolt and miniature pilot light holes

POINT TYPE Self-starting Self-starting Self-starting Self-starting Self-starting Self-starting Self-starting For hole enlarging For hole enlarging Self-starting

DRILLING AND FASTENING

METAL DRILL BITS

NOTE: Drill bits (or extension + drill bit) in excess of 8" should never exceed 600 RPM

TITANIUM-COATED STEP DRILL BITS

ITEM# SDT1 SDT6 SDT2 SDT3 SDT4 SDT10 SDT8

DIAMETER (INCREMENTS) 1/8"–1/2" (1/32") 3/16"–1/2" (1/16") 3/16"–7/8" (1/16") 1/4"–3/4" (1/16") 1/4"–7/8"–1-1/8" 1/4"–1-3/8" (1/8") 1/2"

STEP DEPTH 1/8" 3/8" 1/8" 1/8" 5/32" 1/8" —

NUMBER OF HOLE SIZES 13 6 12 9 3 10 1

SHANK DIAMETER 1/4" 1/4" 3/8" 3/8" 3/8" 3/8" 1/4"

SDT7

9/16"–1" (1/16")

1/8"

3/8"

SDT9

13/16"–1-3/8" (1/16") 1/8"

1/2"

SDT5

7/8"

3/8"

—

APPLICATION All common drilling needs All common drilling needs All common drilling needs Ideal for cutting medium size holes For 1/2" and 3/4" conduit For 1" conduit and tubing Knockout Companion bit to SDT1 for diameter range 1/8" to 1" (requires 1/2" pilot hole) For 1" conduit and tubing (requires 3/4" pilot hole) Drill perfect size holes for conduit. Ideal for drawbolt and miniature pilot light holes

POINT TYPE Self-starting Self-starting Self-starting Self-starting Self-starting Self-starting Self-starting For hole enlarging For hole enlarging Self-starting

NOTE: Drill bits (or extension + drill bit) in excess of 8" should never exceed 600 RPM

196

BOSCHTOOLS.COM 877-BOSCH-99

2018/2019 POWER TOOLS & ACCESSORIES CATALOG