LOCAL RANGE 1/2020 SOUTH AFRICA
Spanners Metric Combination Spanners
Combination Spanners, Metric, DIN 3113A, Offset 15 degrees, Chrome vanadium. Satin Finish. Same dimension at both ends. The 12 point ring end is set at a 15° angle. Item ID.
600508 600509 600510 600511 600512 600513 600514 600515 600516 600517 600518 600519
Size mm
L mm
H1 mm
H2 mm
D1 mm
D2 mm
T mm
Weight g
8 9 10 11 12 13 14 15 16 17 18 19
120 130 140 150 160 170 180 190 200 210 220 230
5.5 5.9 6.5 6.9 7.3 7.8 8.3 8.6 8.9 9.3 9.9 10.5
4.5 4.5 5.0 5.4 5.5 5.9 6.2 6.4 6.7 6.9 7.2 7.4
12.8 14.2 15.6 16.9 18.3 19.7 21.2 22.5 24.0 25.3 26.8 28.1
19.2 21.2 23.2 25.3 27.2 29.4 31.5 33.2 34.7 36.5 38.7 40.7
3.0 3.3 3.5 3.7 3.9 4.1 4.4 4.6 4.8 5.0 5.2 5.4
25 28 38 47 60 68 84 98 104 124 141 158
Loose Tools
Metric Combination Spanners ➔
DO’S AND DON’TS OF SPANNERS
THE RIGHT SIZE SPANNER
Use the correct size spanner, the wrong size spanner will damage the fastening making it more difficult to tighten or loosen. It might also damage the spanner. THE RIGHT TYPE OF SPANNER
Use the spanner type that gives you the best access, the most secure hold on the fastener and best turns the fastener (e.g. ratcheting spanners are very good for turning quickly but fixed spanners can give much more torque). KEEP IT CLEAN AND DRY
After use always check the tools are clean and dry before putting them away, this will help to avoid problems such as corrosion and moving parts seizing or becoming tight. DO NOT USE SCAFFOLDING POLES OR SIMILAR
If the fastener will not turn with the tools you are using you need to use a more powerful tool such as a larger tool or even an impact power tool. Do not use bars to increase the leverage – it is dangerous and can break your tool. DO NOT USE A VEHICLE TO TURN THE NUT
Do not fix a spanner or wrench on to a fastening and then drive the vehicle to force it to turn – needless to say it is dangerous and can break the tools.
33 ®
