SPONSORED: Trim-Lok Inc. Trims and Seals

75350_TrimLok_r8.qxp_TrimLok 1/26/16 10:36 AM Page 1

®

TRIMS AND SEALS

75350_TrimLok_r8.qxp_TrimLok 1/26/16 10:36 AM Page 2

URED T A E F INCHES

DECIMALS MILLIMETERS 1/64

1/32

Trim Seal Pages 18-20

3/64 1/16 5/64 3/32 7/64 1/8 9/64 5/32 11/64 3/16 13/64 7/32 15/64 1/4 17/64

Co-Extruded Trim Seal Page 21

9/32 19/64 5/16 21/64 11/32 23/64 3/8 25/64 13/32 27/64 7/16 29/64 15/32 31/64 1/2 33/64 17/32 35/64 9/16

Rubber Seal Pages 30-36

37/64 19/32 39/64 5/8 41/64 21/32 43/64 11/16 45/64 23/32 47/64 3/4 49/64 25/32 51/64

Custom Rubber Extrusion Capabilities Page 43

13/16 53/64 27/32 55/64 7/8 57/64 29/32 59/64 15/16

Attachment Tapes

61/64 31/32 63/64 1

2

®

INC.

.01562 .03125 .04687 .0625 .07812 .09375 .10937 .125 .14062 .15625 .17187 .1875 .20312 .21875 .23437 .250 .2656 .2812 .2968 .3125 .3281 .3437 .3593 .375 .3906 .4062 .4220 .4375 .4531 .4687 .4843 .500 .5156 .5312 .5468 .5625 .5781 .5937 .6093 .625 .6406 .6562 .6718 .6875 .7031 .7187 .7343 .750 .7656 .7812 .7968 .8125 .8281 .8437 .8593 .875 .8906 .9062 .9218 .9375 .9531 .9687 .9843 1.000

0.3968 0.7937 1.19062 1.5875 1.98437 2.38125 2.77812 3.1780 3.57187 3.96875 4.36562 4.76250 5.15937 5.55625 5.95312 6.3499 6.7467 7.1436 7.5405 7.9374 8.3342 8.7311 9.1280 9.5249 9.9217 10.7154 10.3186 11.1124 11.5092 11.9061 12.3029 12.6998 13.0967 13.4936 13.8904 14.2873 14.6841 15.0811 15.4779 15.8748 16.2716 16.6685 17.0654 17.4623 17.8591 18.2560 18.6528 19.0498 19.4466 19.8435 20.2403 20.6373 21.0341 21.4310 21.8278 22.2247 22.6215 23.0185 23.4153 23.8122 24.2090 24.6060 25.0028 25.3997

75350_TrimLok_r8.qxp_TrimLok 1/26/16 10:36 AM Page 3

TABLE OF CONTENTS EDGE TRIMS

PLASTIC PROFILES

EDGE TRIM . . . . . . . . . . . . . 4-9

LIP GUARD . . . . . . . . . . . . . 24

FIRE RETARDANT TRIM . . . 10

DRIP RAIL . . . . . . . . . . . . . . 25

RUBBER-LOK. . . . . . . . . . . . 11

CARPET TRIM . . . . . . . . . . . 25

EDGE-GUARD . . . . . . . . . . . 12

REDI-STIK . . . . . . . . . . . . . . 26

DECORATIVE TRIM . . . . . . . 13

RV SNAP-IN SEAL . . . . . . . . 27

RUBBER EDGE TRIM . . . . 14-15

RV APPLICATIONS. . . . . . 28-29

SEWABLE UPHOLSTERY TRIM. . . . . . . 16

SEALS

J-CLIPS. . . . . . . . . . . . . . . 16-17

RUBBER-SEAL . . . . . . . . . 30-36 FENDER FLARE TRIM . . . . . 34

TRIM SEALS

TUBING AND CORD . . . . . . 36

TRIM-SEAL . . . . . . . . . . . 18-20

LOCKING GASKET. . . . . . 38-39

CO-EXTRUDED TRIM-SEAL.. 21 HATCH SEAL . . . . . . . . . . . . 22

TOOLS AND DESIGN ASSISTANCE PACKAGING OPTIONS . . . . . . . . . . . . . 37

FLAP SEAL. . . . . . . . . . . . . . 23

DESIGN ASSISTANCE UTILIZING THE RIGHT MATERIAL. . . . . 42

TOOLS AND ACCESSORIES . . . . . . . 40-41 ADHESIVE OPTIONS . . . . . . . . . . . . . . . 42 ADDITIONAL CAPABILITIES . . . . . . . . . 43

®

INC.

3

75350_TrimLok_r8.qxp_TrimLok 1/26/16 10:36 AM Page 4

Edge Trim is a flexible PVC trim with individual internal metal clips and gripping tongues to provide a stronger grip.

Truck Cabs Fiberglass Computer Cabinets Tractor Cabs Riding Mowers

OVER 40

YE

A

• • • • •

• Machinery Guards • Sheet Metal • Playground Equipment • And Many More CE

Check out our How to Install video at: www.edge-trim-install.info

4

®

INC.

EN

Sharp Edges Boats Forklifts Golf Carts Helmets

EX

• • • • •

QUAL I TY &

Many Applications

RI

Strong Gripping Tongue

R

OF

PE

Individual Metal Clips Retain a Permanent Grip

S

75350_TrimLok_r8.qxp_TrimLok 1/26/16 10:36 AM Page 5

1 TRIM EDGE THICKNESS 1/64" 0.016"

1/32" 0.031"

1/16" 0.063"

3/32" 0.094"

1/64"

1/8" 0.125"

Trim Trim Series Color

3/32"

1/16"

1/32"

62-1/64

Coarse=1 Sand=7

Black

Pebble=3 Sand=7

White

Coarse=1 Sand=7

Black

Pebble=3 Sand=7

Light Grey

Coarse=1

Black

Leather=2

62

3/8"

3/8"

62-1/32

3/8"

62-1/16

1/32"

See page 7 7/16" 7/16" 5,000 ft minimum order75-1/16 may apply for 75-1/32 “How to .357 .353 Order” 1/32" Instructions 7/16"

750-1/32

.349

.357

7/16"

750-1/16

3/32"

1/16"

1/8"

75 Series 7/16"

7/16"

75-3/32

75-1/8

.345

Clip

Alum.

62-3/32

.372

.375

Texture

White Series

3/8"

4

3

.285

.295

.297

.306

2

Alum.

.341 1/8"

3/32"

1/16"

750 Series 7/16"

750-3/32

7/16"

750-1/8

Product Specifications: Recommended temperature rating for general applications: -20˚F. through +158˚F.

Outer Coating Material: Vinyl (PVC), Hardness: 85 Durometer (Shore A)

Internal Clip Material: Aluminum or Steel

Flammability & Code Compliance: Vinyl: FMVSS 302 FAA/FAR 23.853 UL 50 UL 844

FILE# MH49032

®

INC.

5

Alum.

75350_TrimLok_r8.qxp_TrimLok 1/26/16 10:36 AM Page 6

1 TRIM EDGE THICKNESS 1/16" 0.063"

3/32" 0.094"

.492

1/8" 0.125"

9/16"

9/16"

100-1/16

100-1/8

100-3/32

.493

.479

9/16"

150-1/16

9/16"

9/16"

9/16"

150-1/8

150-5/32

1/16"

19/32"

19/32"

200-1/16

200-3/32

11/16"

3/4"

6

3/16"

23/32"

3/4"

1/4"

11/16"

1375-1/4

.615 .651 1/4"

3/16"

5/32"

1350-5/32

.598

1375-3/16

.665

1/8"

5/8"

1200-1/4

.650

3/4"

1/4"

3/16"

21/32"

1375-5/32

.670

.542

5/32"

1/8"

3/4"

200-1/4

1200-3/16

.658

1375-1/8

17/32"

.567

1200-5/32

.667

1350-1/8

9/16"

11/16"

1200-1/8

1/4"

3/16"

5/32"

1/8"

.445

200-3/16

.599

.608

1/2"

150-1/4

.460

200-5/32

1/4"

3/16"

17/32"

9/16"

9/16"

200-1/8

.395

5/32"

1/8"

3/32"

100-1/4

150-3/16

.470

.480

.515

.515

1/2"

.445 5/32"

150-3/32

1/4"

3/16"

100-3/16

.466 1/8"

3/32"

1/16"

100-5/32

.465

.408

17/32"

9/16"

9/16"

1/4" 0.250"

.432

5/32"

1/8"

3/32"

3/16" 0.188"

.468

.477

.486 1/16"

5/32" 0.156"

23/32"

1350-3/16

®

INC.

11/16"

1350-1/4

75350_TrimLok_r8.qxp_TrimLok 1/26/16 10:37 AM Page 7

2 5/16" 0.313"

3/8" 0.375"

1/2" 0.500"

Trim Trim Series Color Black

1

Determine edge THICKNESS of your material.

Use column 1.

Grey

100

Measure thickness

Series

Select TRIM SERIES Determine how far trim is to be inserted. Use column 2.

Leg Length

2

Measure distance

Select available COLOR. Use column 3.

3

4

3

White

Texture

Coarse=1 Leather=2 Pebble=3 Basketweave=5 Sand=7 Alum.

Sand=7 Coarse=1 Basketweave=5 Sand=7

Tan

Coarse=1 Sand=7

Light Beige Light Grey Silver

Coarse=1 Pebble=3 Coarse=1 Coarse=1

Black

W

LG

B = Black

W = White

LG = Light Grey

Steel (S)

Leather=2 Basketweave=5 Sand=7

150

B

Clip

Series Light Grey Leather=2 Silver Coarse=1

Alum.

White

Leather=2

Black

Pebble=3 Sand=7

Alum.

Black

Pebble=3 Sand=7

Steel (S)

Black

Pebble=3 Sand=7

Grey

Sand=7

Light Beige

Pebble=3

Select type of TEXTURE. Use column 4.

4

200 1

2

3

5

7

Coarse

Leather

Pebble

Basketweave

Sand

Series

Determine ORDER QUANTITY in 250 foot increments.

5,000 feet minimum for custom colors.

2

3

4

1

1200

Part Number Example 750 B 2 X1/32

Series

.484 .546

.563

1/2" 3/8"

5/16"

1375 Series 21/32"

5/8"

1375-5/16

1375-3/8

19/32"

1375-1/2

1/2" 3/8"

5/16"

Tan

Pebble=3

White

Pebble=3 Sand=7

Black

Leather=2

.495

.555

.575

1350

Alum.

Series 21/32"

1350-5/16

5/8"

1350-3/8

Alum.

Light Grey Pebble=3

White

19/32"

Leather=2

1350-1/2

®

INC.

7

75350_TrimLok_r8.qxp_TrimLok 1/26/16 10:37 AM Page 8

1 TRIM EDGE THICKNESS 1/2" 0.500"

2

5/8" 0.625"

3/4" 0.750"

Trim Trim Series Color

.875

5

Texture

Clip

Jumbo Trim

.750

.813

4

3

3/4" 5/8"

Black Black

1/2"

Pebble=3 Pebble=3

2000

Steel

Series White 1"

2000S-1/2

15/16"

7/8"

2000S-5/8

2000S-3/4

Pebble=3

Jumbo Trim is a flexible PVC trim with individual internal metal clips and gripping tongue to provide a stronger grip.

1

Determine edge THICKNESS of your material.

Use column 1.

Measure thickness

Select TRIM SERIES Determine how far trim is to be inserted. Use column 2.

Leg Length

Measure distance

2 Select available COLOR. Use column 3.

3

B

W

B=Black

W=White

Available TEXTURE is PEBBLE. Use column 4.

4

3 3 = Pebble

5

Available CLIP MATERIAL is STEEL. Use column 5.

Part Number Example

2

5

3

4

1

2000 S B 3 X1/2 See pages 40-41 Part# GSS851 Cuts in seconds.

8

®

INC.

75350_TrimLok_r8.qxp_TrimLok 1/26/16 10:37 AM Page 9

DESIGNED TO FIT A RANGE OF SIZES

Trim Series Thickness between:

.010"-.030" .230"

SIZE RANGE

COLOR

TEXTURE

CLIP

PART NO.

Black Black

Pebble Pebble

Steel

1630SB3-1581

FITS MATERIAL THICKNESSES FROM

Black Black

Pebble Pebble

Steel

1620SB3-341

0.010" TO 0.050"

White

Pebble

Steel

1620SW3-342

Black Black

Basket Basket W Weave Weave

Steel

1600SB5-315

Black Black

Pebble Pebble

Steel

1600SB3-317

Aluminum

1600B3-317

FITS MATERIAL THICKNESSES FROM

0.010" TO 0.030"

.367" Thickness between:

.010"-.050" .280" .450" Thickness between:

.032"-.125"

FITS MATERIAL THICKNESSES FROM

.390"

0.032" TO 0.125" .520" Thickness between:

.085"-.210"

.390"

FITS MATERIAL THICKNESSES FROM

White

Pebble

Steel

1600SW3-1007

Black Black

Basket Basket Weave W Weave

Steel

1645SB5-336

White

Pebble

Steel

1645SW3-337

Black Black

Pebble Pebble

Steel

1645SB3-338

White

Pebble

Steel

1640SW3-331

Black Black

Pebble Pebble

Steel

1640SB3-708

Steel

1650SB3-339

Aluminum

1650B3-339

Steel

1610SB3-343

Aluminum

1610B3-343

0.085" TO 0.210" .518" Thickness between:

.090"-.190"

FITS MATERIAL THICKNESSES FROM

.390"

0.090" TO 0.190" .520" Thickness between:

.090"-.190"

FITS MATERIAL THICKNESSES FROM

.375"

Black Black

Pebble Pebble

0.090" TO 0.190" .650" Thickness between:

.135"-.250"

FITS MATERIAL THICKNESSES FROM

.500"

Black Black

Pebble Pebble

0.135" TO 0.250" .660"

White

Pebble

Steel

1610SW3-344

Black Black

Pebble Pebble

Steel

1660SB3-349

White

Pebble

Steel

1660SW3-1628

Thickness between:

.250"-.500"

FITS MATERIAL THICKNESSES FROM

.723"

0.250" TO 0.500" .640"

®

INC.

9

75350_TrimLok_r8.qxp_TrimLok 1/26/16 10:37 AM Page 10

Fire Retardant Trim is a flexible trim with metal clips to provide a permanent grip. It is manufactured out of a Thermoplastic Elastomer (TPE) material formulated to pass the National Fire Protection Agency (NFPA) standards.

1 TRIM EDGE THICKNESS 1/8" 0.125"

3/16" 0.188"

5/32" 0.156"

Trim Trim Series Color 1/4"

3/16"

5/32"

1/8"

1/4" 0.250"

4

3

2

Texture

Black Black

Pebble=3 Pebble=3

100

Alum.

Series 17/32"

9/16"

9/16"

100-1/8

100-5/32

1/2"

White

Pebble=3

Black Black

Pebble=3 Pebble=3

100-1/4

100-3/16

1/4"

3/16"

5/32"

1/8"

1375

Alum.

Series 3/4"

1375-1/8

3/4"

1375-5/32

Clip

23/32"

1375-3/16

White

11/16"

Pebble=3

1375-1/4 • UL94VO compliant vinyl available by special request only (reference Trim-Lok Material #VY0117)

Product Specifications:

Recommended temperature rating for general applications: -20˚F. through +158˚F.

1 2

Internal Clip Material: Aluminum

Flammability and Code Compliance:

Measure thickness

Select TRIM SERIES Determine how far trim is to be inserted. Use column 2.

Base Material:

(TPE) Thermoplastic Elastomer, Hardness: 80 Durometer (Shore A)

Determine edge THICKNESS of your material.

Use column 1.

Leg Length

Measure distance

Select available COLOR. Using column 3.

3

B

W

B=Black W=White

UL 94 HB NF PA 1971

Select type of TEXTURE. Use column 4.

4

3 3 = Pebble

2

3

4

1

Part Number Example 100 B 3 TPRFR X1/4 10

®

INC.

75350_TrimLok_r8.qxp_TrimLok 1/26/16 10:37 AM Page 11

Rubber-Lok simulates rubber and individual internal metal clips provide a secure grip.

Many Applications • • • •

Boat Consoles ATV’s Helmets Utility Trailers

• • • •

Truck Bodies Automobiles Sheet Metal Products And Many More

Individual Metal Clips Retain a Permanent Grip Black PVC Plastic that Offers a ‘Rubber’ Look and Feel

RUBBER-LOK SERIES-THICKNESS 1/16" 0.063

1/8" 0.125

3/32" 0.13

3/16" 0.188

1/4" 0.250

1100 Series 1/4"

3/16"

1/8"

3/32"

1/16"

Alum.

9/16"

19/32"

19/32"

1100B7X1/16

1100B7X3/32

9/16"

1100B7X1/8

17/32"

1100B7X3/16

1100B7X1/4

2200 Series 1/4"

3/16" 1/8"

3/32"

1/16"

Steel 23/32"

2200SB7X1/16

23/32"

2200SB7X3/32

Custom Materials: Rubber-Lok can be ordered in special compounds based upon your specific application requirements.

Custom Colors: Rubber-Lok can be ordered in custom colors to match your special needs. You can also highlight your trim with special decorative finishes.

Custom Profiles:

23/32"

2200SB7X1/8

21/32"

11/16"

2200SB7X3/16

2200SB7X1/4

Recommended temperature rating for general applications: -20˚F. through +158˚F.

Product Specifications:

Base Material:

Vinyl (PVC), Hardness: 85 Durometer (Shore A)

Internal Clip Material: Aluminum or Steel

Special shapes or modifications to Rubber-Lok can be developed in order to meet your needs.

Custom Length: Rubber-Lok can be ordered in specific cut lengths.

Minimum quantities apply.

®

INC.

11

75350_TrimLok_r8.qxp_TrimLok 1/26/16 10:37 AM Page 12

Clear Plastic

Hot Melt Adhesive

Decorative Mylar

Edge-Guard

is a pre-glued, flexible plastic trim with a mylar or clear cover. It gives a beautiful, finished appearance.

Many Applications • • • • •

Car Door Edges Furniture Vending Machines Running Boards Fender Flares

Product Specifications: Recommended temperature rating for general applications: -20˚F. through +158˚F.

Base Material: Vinyl (PVC), Hardness: 97 Durometer A Decorative Finish: Mylar Overlay White, Hardness: 88A Durometer

Adhesive: Hot Melt Adhesive Optional Butyl Adhesive Sealant

Edge-Guard®

5/16"

Fits over edges up to 1/8"

7/16"

Part No.

Size

Color

EGC

5/16"

Chrome

EGB

5/16"

Black

EGCL

5/16"

Clear

EGW

5/16"

White

EGC7/16

7/16"

Chrome

EGB7/16

7/16"

Black

Fits over edges up to 3/16"

12

®

INC.

75350_TrimLok_r8.qxp_TrimLok 1/26/16 10:37 AM Page 13

Decorative Trim is a flexible PVC trim with chrome and finishes.

1 Finish

2 Trim Series

3 Trim Color

4 Texture 1=Coarse Pebble 7=Sand

White 8=Chrome

100

3=Pebble 7=Sand

Black

Series

Profile

(Approx. full size)

Edge Thickness

1=Coarse Pebble 7=Sand

Leg Length

Decorative Trim-Seal is a flexible PVC trim with decorative finishes. It can be supplied with or without an EPDM sponge rubber bulb to provide a secure seal for a variety of applications.

1 2 3 4 Finish Trim Trim Series Color

100 Series

Black

Tan

375 Series

Black

Tan

1/16"

9/16"

3/32"

9/16"

1/8"

9/16"

5/32"

9/16"

3/16"

17/32"

1/4"

1/2"

Internal Clip

Part Number Example

Alum.

8100B3X1/8

Internal Clip Material:

Recommended temperature rating for general applications: -20˚F. through +158˚F.

Aluminum

Flammability & Code Compliance: Vinyl: FMVSS 302 FAA/FAR 23.853 UL 50E UL 94HB

Outer Coating Material: Vinyl (PVC), Hardness: 85 Durometer (Shore A)

5 Texture

6 7 Edge Leg Bulb Internal Thickness Length Location Clip

Profile

Part Number Example 1

Typical Application 3=Pebble 7=Sand

C E

1=Coarse Pebble 7=Sand

Edge Thickness

1/16"

9/16"

3/32"

9/16"

1/8"

9/16"

5/32"

9/16"

3/16"

17/32"

1/4"

1/2"

3=Pebble 7=Sand

Bulb Size

3 C

Alum.

Trim Series

8 3 100 B 3 X1/8 C

E Trim 4 Color Texture

5

Edge Thickness

6

Bulb Location

C

Edge Thickness

E

3=Pebble 7=Sand

Finish

2

Leg Length

White 3=Pebble 7=Sand

8=Chrome

Leg Length

Product Specifications:

White 1=Coarse Pebble 7=Sand 8=Chrome

5 Edge Thickness

1/8"

3/4"

5/32"

3/4"

3/16"

3/4"

1/4"

11/16"

5/16"

21/32"

3/8"

5/8"

1/2"

19/32"

C

Alum.

E

7

See page 18 for “How to Order” Instructions.

Leg Length

2 Bulb Sizes Available

.200

.236"

.276"

.375"

.437"

.625"

.750"

1.00"

These parts may require minimum orders and longer lead times.

®

INC.

13

75350_TrimLok_r8.qxp_TrimLok 1/26/16 10:37 AM Page 14

RUBBER EDGE TRIM-THICKNESS

Very Flexible to Fit Tight Radius

Pre-Applied Butyl Sealant or Hot-Melt Adhesive

Rubber Edge Trims are available in either EPDM or Neoprene, these two different materials are designed to fit your application perfectly.

Neoprene is a well proven proprietary blend that weathers well, has very good resistance to abrasion, flex cracking, alkalis, and acids and is best used in applications where flame resistance is a requirement. This material has moderate resistance to oils and gasoline. Neoprene is generally considered an excellent all-purpose material with a solid balance of properties and few limitations.

However, expect poor resistance to aromatic and oxygenated solvents and limited flexibility at low temperatures. Hardness:70 Durometer (Shore A) Service temperature ranges from -40°F. to 225°F. EPDM has excellent performance characteristics.

EPDM (Ethylene-Propylene-Diene-Monomer) is best known for its excellent ozone, weathering, and aging resistance. It also has excellent water and steam resistance, maintains its flexibility at low temperatures, features excellent resistance to alkalis, acids, and oxygenated solvents, and is very color stable. It is not recommended for resistance to oil, gasoline, and hydrocarbon solvents. EPDM is found in a wide range of applications and is excellent for use outdoors.

Hardness: 70 Durometer (Shore A) Service temperature range per spec and per vendor from -40°F. to 212°F. for EPDM and Neoprene.

Short term is -40°F. to 225°F. Butyl Sealant can be ordered pre-applied and provides excellent sealing characteristic with good heat performance.

Service temperature ranges from -20°F. to 158°F. Hot Melt Adhesive can be ordered pre-applied and to provide a stronger grip with good heat performance.

Recommended temperature rating from -20°F. to 158°F. FMVSS 302

1/32" 0.032 No glue available in this column

1/16" 0.063

1/16" 0.063

1/16"

1/32"

1/4"

15/64"

11/64"

17/64"

5/32"

7/32"

11/64"

1/8" 0.125

19/64" 1/16"

X1001

3/8"

1/4"

5/16"

1/4"

X1002

X2017

X1003

15/32" 3/8"

9/32"

23/64"

1/4"

3/16" 1/32"

X1010

1/16"

1/2"

3/8"

X1011

X1012

5/32" 7/16"

1/32"

X2001

1/4"

1/16"

1/16"

5/16"

1/4"

X2073

X2002

1/4"

5/16"

5/32" 1/32" 3/16"

X2012

3/8"

1/16"

5/16"

1/8"

1/16"

5/16"

X2008

X2013 9/32"

1/4"

3/16"

1/8"

X2014

1/4"

9/32"

7/16"

3/16" 1/32" 3/8"

1/8"

X2003 1/4"

1/8"

X2059

1/4"

1/4"

3/16" 1/2"

1/4"

1/8"

11/64"

1/8"

5/8"

1/4" 9/16"

1/16"

X2010

X2102

1/8"

1/2"

3/4" 1/2"

1/2"

3/16" 9/16"

1/8"

1/16"

X2009

14

1/8"

X2006

®

INC.

1"

75350_TrimLok_r8.qxp_TrimLok 1/26/16 10:37 AM Page 15

3/16" 0.188

1/4" 0.250

5/16" 0.313

3/8" 0.375 29/64"

7/16" 11/32" 21/64"

15/32"

5/16"

1/4"

3/16"

X1004

11/16"

19/32"

1/2"

13/32"

1/2"

3/8"

5/8"

X1005

5/8"

X1006

X1007 25/32" 3/4"

37/64" 9/16"

37/64"

15/32"

1/4"

3/16" 3/4"

X1014

3/8"

5/16"

15/16"

13/16"

X1013

43/64"

19/32"

X1015

1.00"

X1016

1/8

1/2"

3/4"

0.125

0.500

0.750

5/16" 5/8" 31/32"

23/32" 5/16" 3/16" 3/8"

X2004

9/16"

1"

57/64” 1/8" 1/2"

1.00"

5/8"

X2060

X1018

1 1/4"

X2007

3/4" 3/4"

7/16" 3/16"

X2015

3/4" 3/8"

Neoprene Part# Example

X1001 WG

3/8"

X2011

9/16"

3/16"

EPDM Part# Example

X1001 E WG WG= with glue WB= with pre-applied butyl sealant

Rubber Edge Trim profile

WG= with glue WB= with pre-applied butyl sealant E=EPDM Rubber Edge Trim profile

/8"

®

INC.

15

75350_TrimLok_r8.qxp_TrimLok 1/26/16 10:37 AM Page 16

UPHOLSTERY TRIM Upholstery Trims and J-Clips are manufactured out of a sewable non-break material.

Fabric can be sewn to these parts and used to keep the material tight to the seat frame once in place.

Product Specifications:

Profile

Part No.

Recommended temperature rating for general applications: -20˚F. through +158˚F.

Color

529B3X1/8

Black Black

529CC036-3X1/8

Gray Gray

529CC037-3X1/8

T Taupe Taupe

Outer Coating Material: Vinyl (PVC), Non-break. Hardness: 85 Durometer (Shore A) Internal Clip Material: Aluminum

63/64"

1/8"

Custom colors available. Minimums apply.

Upholstery Trim is sewn to leather seat cover to attach to seat frame

J-CLIPS I11043

Matching Sewable Insert

1.150 1.051 1.1

.571

.380 .530

.433

.300

.337

I11026

I11023

I11038

.264

.045

1.000 .750

.620 .441

.480

.210

I11053

.420

I11109

I11102

Product Specifications: Recommended temperature rating for general applications: -20˚F. through +158˚F.

Material: Polypropylene, Non-break. Hardness: 90 Durometer (Shore A)

16

®

INC.

75350_TrimLok_r8.qxp_TrimLok 1/26/16 10:37 AM Page 17

J-CLIPS

1.180 1.010 .738

.765 .375

.660 .375

.355 .280

.285

.265

I11114

.140

I11107

I11099

I11039

I11059

I11071

Matching Sewable Insert

.310

Matching Sewable Insert

1.290 1.145

1.135 .945 .715 .525

.680

.410

.314

.560

.360 .185

I11108

I11103

I11060

I11072

.562

1.452 .462

.595

I11105

1.102 .614

.260

I11024

®

INC.

17

75350_TrimLok_r8.qxp_TrimLok 1/26/16 10:37 AM Page 18

Strong Gripping Tongue Individual Metal Clips retain a permanant Grip

Seals and Protects against Weather Optional Butyl or Hot Melt Damage!

Adhesive Sealant for a Stronger EPDM Sponge Rubber Bulb

Durable PVC Plastic Trim

OW Off White

Grip and to Prevent Seepage

Trim Seal is a flexible PVC Trim with a sponge rubber bulb seal attached to provide a secure seal for a variety of applications.

Check out our How to Install video at: www.trim-seal-install.info

Determine BULB COLOR

Product Specifications: Recommended temperature rating for general applications: -20˚F. through +158˚F.

Outer Coating Material:

B

Black = No callout neccessary

Determine BULB SIZE based on closed distance between door and jam.

1.5 x Closed dimension = BULB SIZE needed.

(Example: Closed dimension is .50 then 1.50 x .50 = .75 Bulb Dia.) For Location “A”

1

For Location “C” Closed Dimension

Closed Dimension

Vinyl (PVC), Hardness: 85 Durometer (Shore A) Select TRIM SERIES Determine how far trim is to be inserted .

Internal Clip Material: Aluminum or Steel

Flammability & Code Compliance: Vinyl: FMVSS 302 FAA/FAR 23.853 UL 50E UL 94HB

Leg Length

2

Measure distance

Determine TRIM COLOR to best suit application

3

B

W

T

LB

B = Black

W = White

T = Tan

LG

LB = LG = Light Biege Light Grey

Determine TEXTURE to best suit application

FILE# MH49032

4

1

2

Coarse=1

5

3

7

Leather=2 Pebble=3 Basket Weave=5

Sand=7

Determine edge THICKNESS Select BULB LOCATION best to suit .

6

5

A-B*

Typical Applications

A

C

D-E*

Many Applications

E

* A-B or D- E non-standard location, special order, non-returnable

Part Number Example

• • • • • •

Boat Hatch Seals RV Compartments Door Seals Tonneau Cover Seals Tool Box Seals Many More 18

1

2

3

4

5

6

OW 3 100 B 3 X1/8 A ®

INC.

75350_TrimLok_r8.qxp_TrimLok 1/26/16 10:37 AM Page 19

1 Bulb Sizes Available

2 3 Trim Trim Series Color

4 Texture

5 Edge Leg Thickness Length

Profile

(Approx. full size)

6 Bulb Internal Location Clip

Part Number Example

Reference only

.200"

1/64"

2

3/8"

1/32"

3/8"

1/16"

3/8"

3/32"

3/8"

C

Series 3=Pebble 7=Sand

C

Edge Thickness

E

Trim Series

3

A

O62 Black

Bulb Size

1

A

White 1=Coarse Pebble 7=Sand

Alum.

Trim Color

7m 062 B 3 X1/64 A Texture

E

4

Edge Thickness

5 6

Bulb Location Leg Length

A

White 1=Coarse Pebble 7=Sand

7/16"

1/16"

7/16"

3/32"

7/16"

1/8"

7/16"

1/32"

7/16"

1/16"

7/16"

A

3/32"

7/16"

C

1/8"

7/16"

1/32"

37/62"

1/16"

9/16"

3/32"

9/16"

1/8"

9/16"

A

O75 .276"

1/32"

C

Series Black

3=Pebble 7=Sand

Edge Thickness

C

E

Alum.

4075B3X1/32A

Alum.

3750B2X1/16A

E

Leg Length

Black

.375"

A

2=Leather

750 Series White

Black .437"

Tan

100 Series

White Light Biege Light Grey

.625"

Black

150

1=Coarse Pebble 7=Sand

C

Edge Thickness

Leg Length

3=Pebble 7=Sand A

1=Coarse Pebble 7=Sand 2=Leather 3=Pebble

Edge Thickness

C

1=Coarse Pebble

E Leg Length

2=Leather 7=Sand

A

Series White

2=Leather C

Black

.750"

1375 Series

Tan

Edge Thickness

Leg Length

3=Pebble 7=Sand

A

3=Pebble

5/32"

9/16"

3/16"

17/32"

1/4"

1/2"

1/32"

37/62"

1/16"

9/16"

3/32"

9/16"

1/8"

9/16"

5/32"

9/16"

3/16"

17/32"

1/4"

1/2"

1/16"

3/4"

1/8"

3/4"

5/32"

3/4"

3/16"

3/4"

1/4"

11/16"

5/16"

21/32"

3/8"

5/8"

1/2"

19/32"

1/16"

3/4"

1/8"

3/4"

5/32"

3/4"

1350

3/16"

3/4"

Series

1/4"

11/16"

5/16"

21/32"

C White

E

3=Pebble 7=Sand

Edge Thickness

A

Alum.

6100B3X1/8EWB

C E

Steel

A Alum.

7150B2X5/32A

C

4375B3X3/8C

1

Bulb Size

2

A

Trim Series

3 C

Alum.

E

Trim Color

4 375 B 3 X3/8 C WB Texture

Butyl Adhesive

4

Edge Thickness 5 Bulb Location

6

Leg Length

White

Black 1.00"

2=Leather

A

2=Leather

Edge Thickness

C Leg Length

3/8"

5/8"

1/2"

19/32"

®

INC.

A Alum.

C

4350B2X1/2A

19

75350_TrimLok_r8.qxp_TrimLok 1/26/16 10:37 AM Page 20

1 2 3 4 Bulb Trim Trim Texture Size Series Color

Jumbo Trim-Seal Profile

(Approx. full size)

White

#6m

3=Pebble

2000

A

Series

1/2"

1"

A

5/8"

15/16"

C

3/4"

7/8"

E

Bulb Size

2

Trim Series

3

Steel

Trim Color

7 2000 SB 3 X3/4 A Texture

4

Edge Thickness

3=Pebble

Black

5

Bulb Location

Edge Thickness

3=Pebble

Tan

6

See page 19 for bulb size illustrations

C

#6 #7

Part Number Example 1

#7m

#4

Leg (Fixed size)

6 Bulb Internal Location Clip

Reference only

#5m

#3

5 Edge Thickness

E

#100 Leg Length

Additional Trim-Seal Combine any of our stock Rubber Seals with our standard Edge Trim to achieve the perfect Trim-Seal combination for your application. Longer lead times and minimums may apply.

3/16"

1/8"

1/8"

1/8"

5/8" 3/8"

3/8"

7/32"

7/32" 9/32"

103B375B3X3/16E

113B100B3X1/8E

1333B100B3X1/8E

1/8"

3B150B2X1/8A

3/16" 1/8" 1/8"

9/32" 7/16"

1B150B2X1/8C

105B100B3X1/8A

3/8"

1/2"

109B375B3X3/16E

202B100B3X1/8E

See page 18 for “How to Order” Instructions.

3/16"

Check with your Trim-Lok sales representative for additional bulb size options.

9/16"

135B375B3X3/16E

20

®

INC.

75350_TrimLok_r8.qxp_TrimLok 1/26/16 10:38 AM Page 22

EPDM Sponge Rubber Bulb

Resists kinks in a radiused

cor

Tear Resistant

ne

r

1 Bulb Size

2 3 Trim Trim Series Color

4 Texture

formulated compound rubber that provides a watertight seal and prevents leaks.

Recommended temperature rating for general applications: -20˚F. through +158˚F.

Individual Metal Clips Retain a Permanent Grip

Durable PVC Plastic Trim

Hatch Seal is a specially

5 Edge Leg Thickness Length

Profile (Approx. full size)

6 Bulb Location

3/8"

A 11B

100 15/32"

Series

Black

9/16"

3/32"

9/16"

1/8"

9/16"

3/16"

17/32

1/4"

1/2"

1 Bulb Size 2 Trim Series A

3=Pebble

3 Trim C olor

E

12B 100 B 7 X3/16 A

7=Sand Edge Thickness

C E Leg Length

12B

1/16"

Example Part Number

Texture 4 3/16"

17/32"

1/4"

1/2"

C

Edge Thickness 5 Bulb Location 6

Not to scale

FOR A WATER TIGHT SEAL!

• Greater tear strength • Protects against weathering • Wide range of sizes to fit precisely • Reduces noise and vibrations • Optional butyl adhesive sealant for a stronger grip and to prevent seepage into storage compartment

Typical Application

22

®

INC.

75350_TrimLok_r8.qxp_TrimLok 1/26/16 10:38 AM Page 23

EPDM Sponge Rubber Flap

Durable PVC Plastic Trim Strong Gripping Tongue Seals tight to protect against weather damage

Individual Metal Clips retain a Permanent Grip

Flap Seal is a flexible PVC trim with a EPDM sponge rubber flap attached to provide a secure seal in a variety of dynamic applications.

Exceptional Bond Surface

Recommended temperature rating for general applications: -20˚F. through +158˚F.

1 2 3 Flap Trim Trim Length Series Color

4 Texture

5 Edge Leg Thickness Length

Profile (Approx. full size)

6 Flap Internal Location Clip

Reference only

5B=1"

100 6B=1.75"

Series

Pebble White 1=Coarse 7=Sand Flap Length

7B=3" 8B=1.75"

C Location fits 1/4" Trim only

150 Series

3=Pebble 7=Sand

5B=1" White 3=Pebble 7=Sand

Series 7B=3" Flap Length

8B=1.75"

Edge Thickness

Black

3=Pebble 7=Sand

5B=1" C Location fits 1/4" and above Trim only

HOW TO ORDER 1 2 3 4 5 6

9/16"

1/8"

9/16"

5/32"

9/16"

3/16"

17/32"

1/4"

1/2"

1/4"

1/2"

1/8"

3/4"

5/32"

3/4"

3/16"

23/32"

1/4"

11/16"

5/16"

21/32"

3/8"

5/8"

1/2"

19/32"

1/4"

11/16"

5/16"

21/32"

3/8"

5/8"

1/2"

19/32"

1

Flap Length

2

Trim Series

3

A Alum.

Steel

E

Trim C olor

6B 100 B 3 X1/8 A 4

Edge Thickness5

C

Flap Location 6

A E Alum.

7B

1375 Series

3/32"

Edge Thickness

Leg Length

1350

9/16"

Example Part Number

Texture

Black

5B=1"

6B=1.75"

1/16"

EPDM Sponge Rubber Flap

Determine the FLAP LENGTH using column. . . . . 1 Determine the TRIM SERIES # using column. . . . 2 Determine the TRIM COLOR using column. . . . . . 3 Determine the TRIM TEXTURE using column. . . . 4 Determine the EDGE THICKNESS using column. 5 Determine the FLAP LOCATION using column. . 6

Leg Length

C

Typical Applications

3"

6B Flap Location

A Example of flap location A

1.75"

1"

Example of flap location C

5B 1"

To order flaps separately see page 35

Flap Location

5B

E

Flap Location C

8B

Flap Location

1.75"

Flap Length

Flap configuration for 8B ®

INC.

Flap configuration options for 5B, 6B, 7B

E (Lengths not shown)

23

75350_TrimLok_r8.qxp_TrimLok 1/26/16 10:38 AM Page 24

Durable PVC Plastic

Chrome

™

Black

Acrylic Foam Tape

Decorative Mylar Special "L" Shape Design

Lip Guard is a plastic trim with a mylar cover and peel-off tape. This pliable trim comes in chrome and black and has the durability to meet interior or exterior design requirements. Paintable Lip-Guard can be painted to specific color using vinyl base paint.

Many Applications • • • •

Running Boards • Spas Unfinished Edges • Camper Shells Truck Bed Covers • Fender Flares Car Fenders

Product Specifications: Recommended temperature rating for general applications: -20˚F. through +158˚F.

Base Material:

Lip Guard®

Part No.

Roll Size

Size

Color

Hardness

LGC

500 ft

7/16"

Chrome

67D

LGB

500 ft

7/16"

Black

97A

LGB3/4

500 ft

3/4"

Black

97A

Part No.

Roll Size

Size

Color

PLGB

500 ft

9/16"

Black

67D

JLGB

250 ft

1 1/16"

Black

67D

Vinyl (PVC)

Decorative Finish: Mylar Overlay

Adhesive: ™

Acrylic Foam Tape with peel-off liner

7/16" .749

.124

Paintable Lip Guard is...

• Designed to replace the aluminum trim on fiberglass shells • Can be painted with vinyl based paint • Designed for camper shells and running boards • Pliable and durable to meet exterior design requirements

.035

Paintable Lip Guard

9/16"

1-1/16"

24

®

75350_TrimLok_r8.qxp_TrimLok 1/26/16 10:38 AM Page 25

Drip Rail is a flexible plastic peel ’n stick rain gutter that eliminates time consuming installation of aluminum rain gutters. ™ • Easy to install with Acrylic Automotive Grade Foam Tape.

• Bonds above windows on your truck, car, RV or boat to channel off water.

• Eliminate streaks from dew and drizzle.

• Control water runoff.

Durable PVC Plastic

E-Z Peel ’n Stick Rain Gutter with ™ Acrylic Foam Tape Special ‘J’ design to Channel away water

Product Specifications: Recommended temperature rating for general applications: -20˚F. through +158˚F.

Profile

Part No.

Color

DRB

Black

Adhesive: 3M™ Acrylic Foam Tape with peel-off liner

Check out our How to Install video at: www.drip-rail-install.info

29/32"

Base Material:

DRW

Vinyl (PVC), Hardness: 85 Durometer (Shore A)

White

Custom sizes and colors are available on request.

Minimums apply.

1/2"

Sold in 50 or 250 foot increments

Carpet Trim is a flexible PVC trim with a peel and stick carpet edge to prevent carpet frays while providing a finished look.

Product Specifications: Recommended temperature rating for general applications: -20˚F. through +158˚F.

Base Material: Vinyl (PVC)

Carpet Trim

Finish:

Part No.

Size

Color

Hardness

CP1043

.70

Black

93A

I11134

.620

Black

85A

Gloss Black

Adhesive:

.270"

Acrylic Automotive Grade Foam Tape with peel-off liner ™

.700"

.210" .450"

.620"

®

25

75350_TrimLok_r8.qxp_TrimLok 1/26/16 10:38 AM Page 26

Decorative Mylar

Redi-Stik is a flexible plastic trim with a decorative mylar cover. This versatile trim gives an elegant, polished appearance. It comes in two sizes and various colors.

Durable PVC Plastic ™

Acrylic Foam Tape Peel-off Liner

Redi-Stik®

Part No. RSC5/16

3/16"

Size

5/16"

RSB5/16

Color

Hardness

Chrome

96A

Black

96A

Chrome

96A

Black

96A

Black

67D

5/16"

Product Specifications:

RSC7/16

Recommended temperature rating for general applications: -20˚F. through +158˚F.

7/32"

7/16"

RSB7/16 7/16"

Base Material: Vinyl (PVC)

Decorative Finish:

CP1155

1 1/4"

Mylar Overlay

Adhesive: ™

26

1-1/4"

Minimums may apply.

Acrylic Foam Tape with peel-off liner

®

INC.

75350_TrimLok_r8.qxp_TrimLok 1/26/16 10:38 AM Page 27

TED PATEN !

DESIGN TM

Our patented “all-in-one” living hinge Snap-In Slide Out Seal System combines a 3-ribbed bulb seal and flap into one design.

Acrylic Plus pressure sensitive adhesive is utilized as an installation aid and water barrier.

Installation is quick and easy – Stick, Staple & Snap-In to close!

A

SNAP-IN SINGLE FLAP Part Number

Flap Length (A)

I11213-1.320 I11213-1.750 I11213-2.000 I11213-2.125 I11213-2.375 I11213-2.500 I11213-2.875

1.320” 1.750" 2.000" 2.125" 2.375” 2.500” 2.875”

Suggested Locations A B C

B 1.367

C

.700

A

Living Hinge

TM

(A)

Universal Corners Available Upon Request

SNAP-IN DUAL FLAP Part Number I11233-1.750 I11233-2.000 I11233-2.375 I11233-2.500

ADJUSTABLE SNAP-IN DUAL FLAP

1.675

Flap Wall Length (A) Width (B) 1.750” 2.000” 1.875” 2.375” 2.500”

I11282-2.375

2.375”

2.000”

I11281-1.750 I11281-2.375

1.750” 2.375”

2.250”

Part Number I11285-1.750 I11285-2.375 I11285-2.875

(A)

Flap Min.Wall Max. Wall Length (A) Width Width 1.750" 2.375" 2.875”

1.25” 1.25” 1.25”

2.25” 2.25” 2.25”

Living Hinge

Living Hinge (A)

BLE ADJUSTA (B)

Living Hinge

Living Hinge .700

B

TM

SNAP-IN BOTTOM PAN WITH WEAR BAR Part Number

SNAP-IN BOTTOM PAN SEAL

Part Number

Flap Length

I11286-2.00

Flap Length

I11242-2.00

2.00"

.700

2.930" 2.930

2.00 1.150

.710 .350 2.947

.240

Living Hinge

BOTTOM FLAP Part Number

Flap Length (A)

I11136-3 I11136-3.5 I11136-4

3.00" 3.50" 4.00” TM

TM TM

Living Hinge

1.00

C

.700 .700

Patent #’s: 8,701,351; 8,875,443; 8,910,422

(A) ®

INC.

27

75350_TrimLok_r8.qxp_TrimLok 1/26/16 10:38 AM Page 28

VENT SEALS .477

9/16"

1/8"

RV PARTS Trim-Lok has been

15/32"

serving the RV industry at the OEM level as well as the replacement part level for over 40 years.

3/16" 9/16" 3/4"

100-1/8

X1013

This page has been created to quickly and easily identify some of the most frequently used parts and some of their applications.

Each part has minimum quantities required at time of order.

Revolutionary Patented Snap-In Seal System!

ENTRY DOOR SEALS .375

.305

See Page 27

FENDER TRIM

.400 .275

.280 .379

.610

I11097

X2507

I11080 .125 .360

.400

.227 .700

.640

X2468

X2575

X1663BT

Actual size

SLIDE OUT FLAPS FLAP LENGTH

3.00” 3.50” 4.00”

PART NO. I11136-3 I11136-3.50 I11136-4 .500 .125 1.250

3.0 3.5 4.0

Rigid base with flexible wiper

I11136

X2199

4.0 1.040

I11163

.885

I11162

28

3.0

X2828 ®

INC.

75350_TrimLok_r8.qxp_TrimLok 1/26/16 10:38 AM Page 29

DRIP RAIL Profile

Part No.

Color

SCREW CAP COVERS 29/32"

DRB

Black

DRW

White

.95" .77"

1/2"

.52"

.42"

.54"

I10979

.980" .810"

.435"

.585"

I11021

WINDOW SEALS .136

.187

.375

.375

X113

X2421

.400

.300

RV APPLICA CATIO T NS NS

.500

.625

X2897

X1705

BAGGAGE DOOR TRIM SEALS .375

.433

.375

.374 .197 .421

.620 .531

.512 .187

.426 .158

.855

.5625 .125

DD6123

DDA2513

DD6126

3100B3X1/8A ®

INC.

29

75350_TrimLok_r8.qxp_TrimLok 1/26/16 10:38 AM Page 30

Rubber Seals come in a variety of specially designed shapes, made from custom formulated EPDM closed cellular sponge.

Ozone Resistant EPDM Rubber Pressure Sensitive Adhesive (PSA) Tape with Peel-Off Liner For the Best Tape Fit See Page 42

RUBBER SEAL DISCLAIMER: Due to a constant effort to update our Rubber Seal products, specifications are subject to change without notice and without incurring obligation. Because we cannot anticipate or control the many different conditions which this information and our products may be used, Trim-Lok does not guarantee the applicability, accuracy or the suitability of a product in any given situation. Users should conduct their own tests to determine the suitability of each product for a particular application. The products described here are sold without warranty either expressed or implied and the buyer assumes all responsibility for loss or damage arising from the handling and use of our products.

CLEANING AND APPLICATION INSTRUCTIONS

FOR A WATER TIGHT SEAL!

Regardless of bonding surface, it must be clean and free of surface contaminants such as oil, grease, mold release and dirt.

Most bonding failures are due to improperly cleaned surfaces.

Prior to applying any adhesive, clean surface with 50/50 isopropyl alcohol and water solution.

Product Specifications: Recommended temperature rating for general applications: -20˚F. through +158˚F. (EPDM)

Application: For optimum performance use 25% - 40% maximum compression with 25% being optimum.

Resistance Ratings: Excellent resistance to water absorption, ozone, sunlight aging, low temperature, and compression set.

Flammability and Code Compliance: FMVSS 302 UL 50E UL 94HB

30

® ®

INC.

75350_TrimLok_r8.qxp_TrimLok 1/26/16 10:38 AM Page 31

Part Number Example Color

Tape Option

1

3

4

SINGLE

DUAL

Single and Dual Option X=BLACK OW=WHITE Tape Options: (If Applicable) NT = No Tape 2 HT = General Acrylic PSA Rubber Seal Profile BT = Bonded Tape System

X 105 BT SINGLE

“D” SECTIONS

.215

.215

.150

.375

.375 .200

X2476

OW1333

X1333

.360

.360 .610

.375

.500

.468

X1153

X1543

X110

.400

.750

.610

OW109

.530

.375

.610

X109

.312

.190

.250

X2507

X119

.530

.750

.750

X125

OW125

.760

.630

X2373

.562

.562

.497

.312

.750

.750

X135

OW135

.375

.500

.500

X105

X202

OW202

.312

X1750

.500

.500

.437

.825

X2576

.625

.500

.500

X101

.500

X2338

See page 42 for tape options

®®

INC.

31

75350_TrimLok_r8.qxp_TrimLok 1/26/16 10:38 AM Page 32

Part Number Example Color

Tape Option

1

3

4

SINGLE

DUAL

Single and Dual Option X=BLACK OW=WHITE Tape Options: (If Applicable) NT = No Tape 2 HT = General Acrylic PSA Rubber Seal Profile BT = Bonded Tape System

X 105 BT SINGLE

“D” SECTIONS

.750 .562

.625

.360

.360 .500

.625

.500

X108

.625

X2012HT

OW108

.750

X5381

X1458

1.250 1.00 1.040

1.040

.660

1.00 1.125

.945

X2492

X1613

.885

.885

X5272

X2828

OW2828

.380

.500

.380

.375

.500

.630

.625

X1689

X2471

.630

X1712

X1524

.875

.750

.660

X2463

32

.650 .500

.420

.875

X1921

.695

.700

X5036

X2354

® ®

INC.

75350_TrimLok_r8.qxp_TrimLok 1/26/16 10:39 AM Page 33

TRIANGLE SECTIONS 1.00

.625

.625 1.00

X2123 X1678

.500

X2532

60 .380 1.250

X1655

Choose the tape that fits your needs ”HT” GENERAL PURPOSE PRESSURE SENSITIVE ADHESIVE

This acrylic based adhesive is best used to hold the rubber seal in place while installed in a static application or compressed between two stationary objects. May be used in some light duty dynamic applications against a variety of substrates. Good heat performance -20˚F. to +158˚F. Please Note: During application ambient temperature must be above 60˚ F. “BT”

.500

1.500

Adhesive Options –

.630

X2025

™

HIGH STRENGTH TAPE SYSTEM

The ultimate bond between the rubber and substrate. Creates a moisture barrier and air tight seal between rubber and substrate. Highest peel and shear resistance, can be used under high loads of stress and force. Has low initial tack for easy re-positioning during installation and requires 72 hours of cure time for full bond strength. Good heat performance -20˚F. to +158˚F. See our How to Install video at:

.390

www.rubber-seal-install.info .562 .625

2495 .662

PEDESTAL SEALS

X1711 .588

.638

.433

.197

.395 .438

.370

.230 .591

.500

X2337

.188

.340

X2529

.492

X1923

DD6109

.354

DD1604

See page 42 for tape options

® ®

INC.

33

75350_TrimLok_r8.qxp_TrimLok 1/26/16 10:39 AM Page 34

”P” SEALS

LID SEALS

.625

X2452 OW2452 1.00

.500

.850 .875

1.500

1/8" .611

2.625

X402

.884

.25

.550

3MM VENT HOLE EVERY 12 INCHES

.500 .125

.015 .40

.125

.180

1.500

1.250

X2575

DD1612

X2199

X1145

ADDITIONAL PROFILES

FENDER FLARE TRIMS .289

.750

.790

.379

.688

.590

.125 .090 .273 .227

.560

.600

X1058 X1643BT Roll size 500ft.

Dense

Actual size

X1663BT Roll size 500ft.

Dense

X1899 .501

Actual size

Fender Flare Trim is an ozone resistant EPDM rubber that mounts between the flare and ™ the body. automotive grade tape creates a solid bond between both surfaces.

.396

.374

.437 .090 .172

.410 .690

X2048

X2298

1.125

Easily installed before fender flare is installed against body to isolate vibration and provide an attractive finish.

34

.100

X2730

2.00

See page 42 for tape options

®

INC.

75350_TrimLok_r8.qxp_TrimLok 1/26/16 10:39 AM Page 35

Part Number Example Color

Tape Option

1

3

4

SINGLE

DUAL

Single and Dual Option X=BLACK OW=WHITE Tape Options: (If Applicable) NT = No Tape 2 HT = General Acrylic PSA Rubber Seal Profile BT = Bonded Tape System

X 105 BT SINGLE

RIBBED SECTIONS

.315 .200 .594

.375

X2421

X1568

.375

.350

.375

.375

X2266

X113

OW113

.500

.625

X2897

X1621

.500

.500

X114

.589

X112

.450

.625

.660

X1705

OW114

.500

X376

.400

.250

.250

.125

.123

.100

X103

.435

X1698

.187

.300

.625

.187

.187

.125

.105

X2469

FLAP SECTIONS X2248

X2877

EPDM Dense

.125

.090

.250

.500 1.255

2.750

8B

.466

X2045

EPDM Dense

.010

.125 .125 3.00

1.75

5B

X2064

1.00

EPDM Dense

.063

.010 .40 .125 4.00

6B

7B 3.00 1.750

.010

.010 .40

.40

See page# 42 for tape options ®

INC.

35

75350_TrimLok_r8.qxp_TrimLok 1/26/16 10:39 AM Page 36

CORNER GUARD TAPE OPTIONS

.530

D C

A

.690

.500

B

.500

X2389

X2254

See page 42 for tape options

SPLICE CORD & WELTING

TUBING AND CORD

Diameter

.153

SOLID RECTANGLE

TUBING

SOLID ROUND

'A' Dimension

Diameter

Wall Thickness

'B' Dimension .045

I11090

Part#

Diameter

Part#

Diameter

X301

.25"

X310

.236"

X303

.168

.38"

X305

.50"

X307

.625”

X311

Part#

'A' Dim.

'B' Dim.

X272

.25"

.50"

.035"

X273

.38"

.50"

.25"

.75"

.206“

X313

.38"

.028”

.050"

X315

.437"

.364“

.058"

X275

.50"

.75"

.078"

X1449

.75"

.375"

.093"

X1450

.75"

.125"

.125"

X268

.25"

.25"

X319 .050

Wall Thickness .031”

X274

X317

I11091

.276"

Inside Dim. .174”

*X321

.63" .75" 1.0"

.474” .564“ .075”

* These parts sold in 500 foot increments except X321 (125ft.)

Profiles shown not to scale

FOR A WATER TIGHT SEAL!

Part Number Example Color

Tape Option

1

3

4

SINGLE

DUAL

Single and Dual Option X=BLACK OW=WHITE Tape Options: (If Applicable) NT = No Tape 2 HT = General Acrylic PSA Rubber Seal Profile BT = Bonded Tape System

X 105 BT SINGLE

36

®

INC.

75350_TrimLok_r8.qxp_TrimLok 1/26/16 10:39 AM Page 37

1/8"

1/8"

.187 .375 9/16"

9/16"

100-1/8

X113HT

100-1/8

Dual 500 ft.

.563

.500

.218 .375 .500

X1333HT

These boxes are designed to allow the customer to feel the part while still preserving the integrity of the packaging. This option also has a foldable tab allowing them to be hung on a peg or stacked on a shelf.

AM100B3X1/8-25 AM100W3X1/8-25 AMX113HT-50 AMX202HT-25 AMX1333HT-50 AMX135HT-10

X202HT

.750

X135HT

25 packs of black 100-1/8 25 packs of white 100-1/8 25 packs of black X-113HT 25 packs of black X-202HT 25 packs of black X-1333HT 25 packs of black X-135HT

(25 ft.)

(25 ft.)

(50 ft.)

(25 ft.)

(50 ft.)

(10 ft.)

3/16"

1/16"

9/16"

This packaging option is a hangable poly bag that captures and protects the parts.

This option is also available in for those customers that need a private label attached.

17/32"

AMHC-100B3X1/16-25 (See page 6)

AMHC-100B3X3/16-25 (See page 6)

Hanging Polybag Option Edge Thickness

9/16"

AMHC-12B100B7X3/16C-25 (See page 22)

1/16" 9/16"

AMHC-4100B3X1/16C-25 (See page 19)

Minimums and lead times may apply.

®

INC.

37

75350_TrimLok_r8.qxp_TrimLok 1/26/16 10:39 AM Page 38

Locking Key (Part 2)

Locking Gasket is an EPDM dense rubber extrusion One-Piece Locking Gasket

Two-Piece Locking Gasket (Part 1) Dense EPDM Rubber

One-Piece Installation Tool Item #365-0003

ONE-PIECE LOCKING GASKETS LK1522

LK1663

LK987

LK1536

1/4" Glass

1/4" Glass

1/4" Glass

1/4" Glass

1/16" Edge

1/8" Edge

1/8" Edge

1/4" Edge

LK2015

1/4" Glass

** Minimum Recommended Clearance

1/16" Edge

LK1660 1/4" Glass

1/8" Glass

1/16" Edge

1/8" Edge

Glass Panel Thickness

Body panel thickness

**Minimum recommended clearance between glass and edge

LK1522 LK1663

0.1875" -- 0.250" 0.1875" -- 0.250"

0.035" -- 0.067" 0.09" -- 0.14"

0.301" 0.220"

1.07" 0.90"

2.50" 1.50"

0.275 lbs.

0.196 lbs.

LK987 LK1536 LK2022 LK2015 LK1615

0.1875" -0.1875" -0.250” -0.200” -0.1875" --

0.09" -0.1875" -0.04” -0.075” -0.06" --

0.14" 0.25" 0.08” 0.095” 0.09"

0.265" 0.406" 0.280” 0.260” 0.300"

1.07" 1.09" 0.970” 0.95” 0.906"

2.50" 3.50" 2.50" 2.50" 2.50"

0.246 lbs.

0.225 lbs.

0.323 lbs.

0.236 lbs.

0.275 lbs.

LK2001 LK1621

0.120” -- 0.140” 0.1875" -- 0.250"

0.030” -- 0.060” 0.046" -- 0.075"

*0.160” *0.140"

1.00” 0.937"

2.50" 2.00"

0.286 lbs.

0.26 lbs.

LK1660

0.1875" -- 0.250"

0.075" -- 0.140"

*0.140"

1.00"

2.00"

0.293 lbs.

Part Number

Installed Profile Example

1/4" Glass

1/4" Glass

1/32" Edge

1/16" Edge

3/32" Edge

LK2022

LK1621

LK2001

LK1615

1/4" Glass

38

designed to lock in the installation of stationary windows or windshields. Locking Gaskets provide a secure seal between a metal or fiberglass body panel and a glass or plexiglas window.

Available in one-piece and two-piece styles with a locking key, and are highly resistant to numerous environmental conditions.

Slip coating available upon request.

• Resistance to Ozone — Excellent • Water Absorption — Excellent • Sunlight Aging — Excellent • Low Temperature — Excellent • General Temperature Rating -40˚F. to + 212˚F. • Flammability and Code Compliance — FMVSS 302

0.250" 0.250" 0.313” 0.250” 0.250"

®

Overall Height

INC.

Minimum recommended radius of panel opening

Weight per foot

75350_TrimLok_r8.qxp_TrimLok 1/26/16 10:39 AM Page 39

INSTALLATION

1. Secure Locking Gasket to body panel.

2. Lubricate Locking Gasket. Then slide glass in bottom first.

Part 1

TWO-PIECE LOCKING GASKETS LK1179

LK1035

LK1488

3. Finish working rubber around glass with tools found on pages 40-41.

See our How to Install video at:

www.locking-gasket-install.info LK1696

LK1456

1/4" Glass

1/4" Glass

1/4" Glass

3/16" Edge

3/16" Edge

1/4" Glass

1/4" Glass

1/16" Edge

Part 2

1/8" Edge

LOCKING KEY OPTION

1/4" Edge

LK1573

LK2016

LK2004

Installed Profile Example

Two Piece Locking Gasket Part 1

5/32" Glass

1/4" Glass

3/16" Glass

Locking Key Part 2 ** Minimum Recommended Clearance

Black Locking Key

Chrome Mylar Locking Key .220"

.320"

LK937

.400"

LK723C

1/8" Edge

.400"

*

Part Number panel thickness panel thickness Part Number Glass panelGlass thickness Body panelBody thickness

L

See page 40-41 for more information on Locking Gasket installation tools.

LK1035 LK1179 LK1488 LK1456 LK1696 LK1573 LK2016 LK2004

--0.1875" .250" ---0.1875" .250" ---0.1875" .250" ---0.1875" .250" ---0.1375" .250" -- 0.125” .187” --

.250" 0.050" -- . 0.050" -- .095" .250" 0.093" -- . 0.093" -- .140" 0.1875" - .0.1875" -- .250" .250" 0.175" -- . 0.175" -- .188" .250" 0.175" -- . 0.175" -- .188" .250" 0.100” -- . 0.100” -- .140” .187” - 0.180” .220” -- .220” 0.100” -- . 0.100” -- .130” - 0.180” .220” -- .220” 0.09” -- . 0.09” -- .125”

**Minimum recommended clearance between glass and edge

0.23" 0.30" 0.30" 0.30" 0.260" 0.246” 0.265” 0.35”

3/16" Edge

7/64" Edge

Overall Height

Minimum recommended radius of panel opening

Weight per foot

2.25" 2.5" 3.5" 2.0" 2.0" 4.0” 4.0” 2.5”

0.155 lbs.

0.277 lbs.

0.202 lbs.

0.198 lbs.

0.193 lbs.

0.289 lbs.

0.358 lbs.

0.241 lbs.

0.85" 1.10" 1.00" 0.95" 0.95" 0.961” 1.29” 1.07”

®

INC.

Matching black locking key part number (part 2)

LK937 LK937 LK937 LK937 LK937 LK937 LK937 LK937

Matching chrome locking key part number (part 2)

LK723C LK723C LK723C LK723C LK723C LK723C LK723C LK723C

39

75350_TrimLok_r8.qxp_TrimLok 1/26/16 10:39 AM Page 40

A Instant Adhesive

A superior adhesive bond on “hard to glue” surfaces that creates a secure seal on corners and joints. It protects TRIM-LOK products against harsh conditions by bonding ends securely.

This product bonds rubber, plastic, fiberglass, metal, wood, paper, leather, and foam. It cures in 0 – .25 seconds with a temperature rating of 20°F. to +150°F., with full cure in 24 hours.

1.2 oz (34g a bottle) STOCK #4401TL

A B

B Straight Edge Clipper

C

A compact hand-held tool that creates a professional appearance on most applications. Product comes with 2 replacement blades.

(2 blades/pkg.)

STOCK #WCSC1 Replacement Blades #RBA

C EC-1 Tool

General purpose cutter.

STOCK #EC-1

D Handheld Roller

A handheld roller to assist with the correct application pressure needed for all Rubber Seal adhesives.

STOCK #HR-1

D

E Ball End for 1-piece Locking Gasket This tool has a small, round steel ball on the end. Once the steel ball is inserted down into the rubber gasket, it is very difficult for it to come out. If it should slip out of the gasket, there is less of a chance you will scratch the paint of the vehicle you are working on.

J

E

STOCK #365-0007

F Lock Strip Insertion Features off-set handle to keep hands away from glass and two double end tips that will fit most applications. The unique design allows the tip to swivel 90 Degrees.

Intended for 2-piece locking gaskets.

F

STOCK #365-0008

G Plastic Installation Tool

Specifically designed to ensure a safe, easy, and efficient installation of one piece Locking Gaskets for stationary windows and other glass applications.

STOCK #365-0003

40

G

®

INC.

75350_TrimLok_r8.qxp_TrimLok 1/26/16 10:39 AM Page 41

H Rubber Seal 90˚ Miter Tool Heavy-duty construction provides clean, 90˚ miter cuts with minimal effort.

Blade opens .50". Larger rubber seal parts may be cut by compressing the overall height.

STOCK# GS849RS Blade Replacement #GS848RS

H

I 90˚ Miter Tool A perfect miter with the close of your hand! This tool is designed to miter, notch or trim a variety of materials, including metals, plastics, and mitering metal core trim. Blade opens .25".

STOCK #GSS851 Blade Replacement #GS850

I .875

J Locking Gasket Tool Kit BITE HEIGHT .50

Specifically designed to ensure a safe, easy and efficient installation of Locking Gaskets for stationary windows and other glass applications.

STOCK #365-0000

.875

K Pneumatic Hammer

BITE HEIGHT .25

This palm size pneumatic hammer applies trims and seals where speed and high volume installations are essential. This product eliminates the need for a variety of cumbersome hammers and mallets.

STOCK #AH-1 O-Ring Replacement Kit #AS-OK-151 Tip #AH-T-15-SS

L M

L Gasket Rope Insert This handy gasket rope insert tool is designed to ease the rope under the lip and seat it in the groove of the gasket.

It comes with a sturdy 20 foot rope.

STOCK #365-0005

K

M Pigtail for 1-piece Locking Gasket It can be difficult to fold the selflocking rubber into the locking part.

This tool solves this problem by rolling the locking lip into the body easily.

STOCK #365-0006

®

INC.

41

75350_TrimLok_r8.qxp_TrimLok 1/26/16 10:39 AM Page 42

Utilizing the Right Material EPDM (Ethylene-Propylene-Diene-Monomer) is well known for its excellent ozone, weathering and aging resistance. It also has excellent water and steam resistance, maintains its flexibility at low temperatures, features excellent resistance to alkalis, acids and oxygenated solvents, and is very color stable. It is not recommended for resistance to oil, gasoline and hydrocarbon solvents. EPDM is found in a wide range of applications and is excellent for outdoor use.

Neoprene (Polychloroprene) has moderate resistance to oils and gasoline. It features good flame resistance, weathers well and has very good resistance to abrasion, flex cracking, alkalis and acids.

However, expect poor resistance to aromatic and oxygenated solvents and limited flexibility at low temperatures. Neoprene is generally considered an excellent all-purpose elastomer with a solid balance of properties and few limitations.

Nitrile (Acrylonitrile-Butadiene) has very good oil and abrasion resistance to alkalis and acids. Nitrile must be specially compounded for resistance to ozone, sunlight and natural aging. It has poor resistance to oxygenated solvents. Nitrile is superior to neoprene in oil and solvent resistance, but is not recommended for applications where it is exposed to severe weathering.

CLEANING AND APPLICATION INSTRUCTIONS

Nitrile PVC provides premium performance and long-term reliability in very harsh and corrosive environments. Has exceptional resistance to heat aging and a broad range of fuels, solvents and chemicals makes it ideal for many demanding aerospace, automotive and industrial applications. Fluoroelastomers also offer excellent resistance to weather, ozone, oxygen and sunlight, and are inherently more flame retardant than hydrocarbon rubbers.

Fluoroelastomers have poor resistance to ketones, ester, ethers, amines and aqueous bases (e.g., ammonia and sodium hydroxide).

TPE (Thermoplastic Elastomers) are materials that have the properties and performance of rubber, but are processed like thermoplastics.

Performance properties are similar to conventional thermosets such as EPDM or neoprene. TPE has good direct flame resistance as well as aliphatic and aromatic hydrocarbon solvents, oil and gasoline.

PVC has excellent impact strength, good resilience, tensile strength, abrasion resistance and maintains flexibility at lower temperatures. It is not the polymer of choice when resistance to oil, gasoline and hydrocarbon solvents is required.

Silicone Rubber offers good resistance to extreme temperature, being able to operate normally from -50°F. to 500°F.+ while retaining flexibility. And, at extreme temperatures, silicone's tensile strength, elongation, tear strength and compression set can be far superior to conventional rubbers.

Regardless of what bonding surface you apply the gasket to, it must be clean and free of surface contaminants such as oils, greases, mold releases and dirt in general. Most bonding failures are not due to the adhesive failing but, instead the failure to properly clean the surfaces. Prior to applying any of these adhesives, clean surface with 50% denatured alcohol and 50% water solution.

Choosing the Right Adhesive ADHESIVE OPTIONS ADHESIVE CROSS SECTION

BT 3M™ BONDED TAPE SYSTEM The ultimate bond to the rubber and the ultimate bond to the substrate.

Specifically designed to perform in dynamic applications ,this engineered tape system creates a moisture barrier and air tight seal between rubber and substrate. Highest peel and shear resistance, low initial tack for easy repositioning during installation and needs 72 hours of cure time to come to full bond strength. Good heat performance -20˚F to +158˚F.

Sponge Rubber Seal

.045

BT

Heat Activated Adhesive Acrylic Foam Acrylic Adhesive

HT

Release Liner

HT STANDARD PRESSURE SENSITIVE ADHESIVE This acrylic based adhesive is best when used to hold the rubber seal in place in a static application or compressed between two stationary objects. May be used in some light duty dynamic applications against a variety of substrates. Good heat performance -20˚F to +158˚F.

Sponge Rubber Seal .010

Acrylic Based Adhesive Release Liner

HTR

HTR

HIGH TACK PRESSURE SENSITIVE ADHESIVE

This rubber based adhesive is best when used to hold the rubber seal in place while installing in static applications or compressed between two stationary objects. HTR has better initial tack as well as adhering to some difficult bond surfaces such as polypropylene and polyethylene. Heat limitations -20˚F to +130˚F.

42

Sponge Rubber Seal .010

Rubber Based Adhesive Release Liner

®

INC.

75350_TrimLok_r8.qxp_TrimLok 1/26/16 10:39 AM Page 43

Trim-Lok’s Quality is First!

Since 1971 customer satisfaction has been our number one priority. Our objective is to ship quality and reliable products to all of our valued customers. Our goal is to maintain a Quality Management System that meets or exceeds the requirements of ISO/TS 16949 and ISO 9001.

Trim-Lok’s Service Trim-Lok’s Mission is: “To be the leader and trusted supplier of choice for innovative Trim and Seal solutions.”

With over 40 years of consistent growth Trim-Lok has proven to its customers that premier customer service and quality is the priority. Trim-Lok has provided support to their customers by shipping on time for both off-the-shelf and custom extruded parts.

Trim-Lok Custom Fabricated Solutions Trim-Lok brings the most experienced team in the industry toward the development of custom fabricated solutions across all of the industries it serves. Trim-Lok’s product development assistance unifies industrial design, engineering rigid prototyping and manufacturing to serve their customers. Trim-Lok’s product development team brings high caliber mechanical design, excellent materials knowledge, and strong manufacturing expertise. All of our processes involve continuous improvement and our employees are recognized for their contributions to this end. All aspects of Trim-Lok from custom design to engineered solutions to on-time deliveries are centered around our highest priority – Keeping our customers satisfied.

MATERIALS Rubber • EPDM (Ethylene-Propylene-Diene Monomer) - Sponge and various durometers of Dense • Nitrile (BUNA-N) - Dense • Nitrile PVC (N/PVC) - Sponge • Neoprene (CR, Chloroprene) - Sponge and various durometers of Dense • Silicone (SI) - Sponge and various durometers of Dense Plastic • TPE, TPO, TPR, TPU, TPV • PVC - Flame Resistant • PVC - Flexible and Rigid • Polyethylene (HDPE, LDPE, LLDPE) • Acrylonitrile-Butadiene-Styrene (ABS) • Polypropylene

ADDITIONAL CAPABILITIES

TRIM-LOK’S CAPABILITIES & DELIVERABLES • Single and Co-Extrusions • High Tolerance Splicing • Plastic Welding • Pressure Sensitive Adhesives • Continuous or Cut to Length • Custom Design/Profile • Custom Kit Assemblies • Private Label Packaging • Custom Color Matching • Notching • In-line Printing • Mitered Corners and Frame Assemblies • Hot Bonded Corners • Cold Bonded Corners • Injection Molded Corners • Film Splicing • Drilling / Punching • Decorative Mylar Application • Slip Coating

®

INC.

43

75350_TrimLok_r8.qxp_TrimLok 1/26/16 10:39 AM Page 44

TRIM-LOK, INCORPORATED LIMITED WARRANTY

Trim-Lok®, Inc. warrants all applicable products to be free from defects in material and workmanship for a period of ninety (90) days from date of purchase. This warranty does not include damage to products resulting from accident, misuse, improper installation or storage, and unauthorized alterations.

Trim-Lok’s warranty obligation shall be limited to furnishing substitute products for original products, which in Trim-Lok’s sole judgement, have proven defective in material or workmanship within the ninety (90) day warranty period.

Any implied warranties of merchantability or propriety for any particular purpose, shall be strictly limited in duration to that of the express warranty set forth above. In no event shall Trim-Lok be liable for any special, incidental or consequential damages resulting from the manufacture, sale, or use of these products under any legal theory. Said damages shall include, but not be limited to, lost profits, damage to property, or damages for personal injury. Trim-Lok’s liability shall in no case exceed the price paid for the product claimed to be defective.

RETURNS:

Trim-Lok will not accept returns without prior authorization and an RMA number issued and marked on the return merchandise.

Returns may be subject to shipping and restocking charges.

Trim-Lok reserves the right to ship and bill up to 10% over and under quantity ordered on all parts.

NOTE:

Some ingredients used in these products, or their component materials, may not be compatible with certain surfaces.

These ingredients may cause staining and or other consequential damages.

CATALOG INFORMATION: The information contained in this catalog is based upon data believed to be accurate. Specifications and products are based upon information at the time of printing and are subject to change without notice and without incurring liability.

No guarantee or warranty is made of the catalogs accuracy.

Trim-Lok assumes no liability for product failure unless specifically stated in writing by an authorized representative of Trim-Lok. No warranties, expressed or implied, other than Trim-Lok’s written limited warranty, will be honored.

®

Made In USA

2002/95/EC

TRIM-LOK California • 6855 Hermosa Circle • Buena Park, CA • 90622-6180 TRIM-LOK Midwest •1642 Gateway Ct. • Elkhart, IN • 46514

Toll Free: 1-888-TRIM-LOK (874-6565) (714) 562-0500 • FAX: (714) 562-0600 • E-Mail: info@trimlok.com • Website: www.trimlok.com ©2016 Trim-Lok, Inc. All rights reserved.