AL HADAF
For Specialised Engineering Products
CO.
2
Always important to stand on solid ground ...
3
Al-Hadaf for Specialized Engineering Products was established in the year 2000 in Jordan as a company mainly specialized in executing a high quality work in the following fields:
- Waterproofing. - Thermal insulation. - Joints & covers. - Industrial floor toppings (epoxies & polyurethane). - Laying, spreading and finishing of concrete slabs. - Stamped concrete & Stucco. - Renovation work.
Al-Hadaffor
Specialized Engineering Products is the agent of many international companies in the field of construction chemicals, such as:
- CMCI construction material chemical industries, which was formed in The year 1983, locating in Saudi Arabia, working on manufacturing a high quality range of materials that includes Admixtures, Concrete sealers, Liquid applied waterproofing Membranes, Epoxies & Polyurethane flooring, Joint sealants, cementations and Epoxy mortars & repair materials. - APURVA India Limited which is well known as one of the biggest manufacturing Companies in India in terms of Electro static dissipative industrial flooring (epoxy & polyurethane) & other waterproof materials.
4
5
AL HADAF
For Specialised Engineering Products
6
CO.
- JP specialties Inc./ Earth Shield which is a USA company specialized in producing Rubber waterstop, Stainless Steel Waterstop & Hydrophilic waterstop. - ABC Polymer Industries-USA Co./ which is fully integrated manufactures of monofilament & fibrillated Polypropylene fibers that is used in the concrete industries to prevent thremal cracks.
Al-Hadaf For Specialised Eng.
Products has a sister company called Accomphishments Co. for construction chemical products which is a manufacturer & trading Co. with a trade mark (Mitco). It supplies the market many quality controled products like.
- Tile adhesives & grouts - Rubber, stainless steel & swellable waterstop - Impregnated fiber boards (12, 18 & 25 mm) - Bitumen based protective coatings & waterproof membranes - Repair products (cementitious and epoxy based products) - Stonewater repellent product (water base) - Stamped concrete products (coloured hardener, coloured release (powder) liquid release and sealer) - Coloured plastering Materials (Stucco) - Joint sealants & Aluminium covers.
7
LASER LEVELING MACHINE
Al-Hadaf Co. execute concrete floors using laser leveling technology to cut the concrete to a finished grade, screed it flat and vibrate it smooth in one pass. It is the right choice to get a better performance, when there are difficult application such as chaired rebar, low slump concrete or poor subgrades.
Laser Screed machine
How It Works ? The Laser Screed machine works by using the same basic laser control system as the “big” laser screeds. Some of the electronic components are different, but the key principle remains the same. The machine auto level system makes achieving great floors easy.
8
LASER GRADING MACHINE
PowerRake machine
How It Works ? The Power Rake machine is a concrete grading machine that makes your job easier by taking the back - breaking work out of raking concrete. Its uniqe design allows the operator to rake the dumped concrete down to grade with + or - 6mm accuracy.
9
STAMPED CONCRETE
Stamped Concrete is concrete that is patterned and/or textured to resemble brick, slate, agstone, stone, tile, wood and various other patterns and textures. Stamped Concrete is commonly used for patios, sidewalks, driveways, and oors. The ability of stamped concrete to resemble other building materials makes stamped concrete a less expensive alternative of using those other materials.
10
There are three procedures used in stamped concrete which separate it from other concrete procedures; The addition of a base color, the addition of an accent color, and stamping a pattern into the concrete. These three procedures provide stamped concrete with a color and shape similar to the natural building material.
Stamp : Stone Texture Skin
Stamp : Heavy texture skin
Stamp : Wood Plank
Stamp : Regal Ashlar
Stamp : Ashlar Cut Slate
Stamp : Stone Texture Skin
11
12
Stamp : Grand Ashlar
Stamp : Random Stone
Stamp : 10 x 10 Granite Set
Stamp : European Fan
Stamp : European Fan
Stamp : Cobblestone
Stamp : Random Stone
Stamp : 20x20
Stamp : 10 x 10 Granite Set
STAMPED CONCRETE Method of application The concrete surface should be floated using a wood or magnesium “Bull-float” prior to the application of the Mitcocolor Hardener. Spread two third of the required quantity onto the concrete surface and allow the material to absorb moisture from concrete. When the slab has an even, solid color appearance , the surface should be floated as above. Using a steel trowel, the surface should be trowelled well to eliminate any float marks and to achieve the final finish. Prior to imprinting, the trowelled slab should be covered with Micropowder Release agent at a rate of 120 gm/m². The crew should be equipped with a minimum of 6 or more mats and a floppy. Adequate and enough hand tools should be available to complete the whole area. Using a reference line, begin by placing the first mats using this line and move across the slab. When stamping, the mats should be tamped without delay. The finished slab should be left for a minimum of 2 days to set. All excess powder release agent should be brushed off and then cleaned using pressurized water. The slab must be completely dry before the sealer coat is applied. The surface must be sealed using Mitco seal at a rate of 6-8 m²/liter. Application rate Materials should be applied at the following rates: Mitcocolor Hardener: 3-5 kg/m², depending on color. Mitcopowder Release: 120 gm/m². Mitco Sealer: 6-8 m²/liter, depending on concrete porosity.
13
14
Don`t Call It Concret
It`s An Art concrete
15
STAMPED CONCRETE
reямВect the atmosphere ...
16
STAMPED CONCRETE
17
EPOXY & POLYURETHANE Your concrete oor needs coating because it should be: - Seamless and wear resistant. - Non dusting and easily cleanable. - Impermeable to oil, water and chemicals. - Hygienic. - Aesthetic for improved productivity.
18
COMPARISON BETWEEN EPOXY AND POLYURETHANE COATING : Sr. No.
Characteristics
Epoxy Coating
Polyurethane Coating
1
Nature of Coating
Solvent based for solvent free epoxy
Water based PU
2
Diluent Used
Thinner
Water
3
Non Yellowing Properties
Yellows within 6 months to 1 year
Absolutely non yellowing
4
Crack Bridging
Hard and brittle therefore opens the crack immediately on formation.
Elastomeric in nature therefore keeps the cracks in the wall covered.
5
VOC
Present in solvent based coating
Absent
6
Washability
Washable
Washable
7
Antifungal performance
Antifungal
Antifungal
8
Ease of Application
DifďŹ cult due to solvent vapours
Easy as water based
19
Executed projects
20
EPOXY & POLYURETHANE
21
Stucco - Mitcoplaster 600 Stucco, or portland cement plaster, is a versatile facing material that can be applied to flat or curved surfaces either inside or outside any building or structure. Stucco has great appeal as a surface finish because of its utility, low first cost, and minimum need for maintenance. In its hardened state, plaster is a desirable facing material: hard, strong, fire-resistant, and color-retentive. Because plaster is also breathable, or able to transmit moisture vapor, water that gets behind it does not become trapped. That makes it resistant to rot and fungus. Plaster has proved to be a durable wall cover in all climates, whether wet, dry, hot, or cold.
22
Stucco - Mitcoplaster 600 Stucco is a beautiful exterior ďŹ nish that has a Mediterranean style. The mixture for stucco is comprised of several base ingredients, as well as sand that are all mixed with water. Once applied, the stucco material hardens, giving the home a beautiful appearance and unique texture. For instance, it is common to ďŹ nd stucco used on Spanish style homes, making them distinctive over other homes. However, stucco can be applied to any style home, changing and updated the overall look.
23
Method of application
The national standard for traditional stucco application can be found in ASTM C 926. This standard defines the requirements for mix portions application and curing. In wood frame construction a typical application consists of three coats.,The first is a scratch coat followed by a brown coat and then a finish coat for a total thickness of 7/8-inch. It should be noted that the 2003 International Residential Code requires a minimum thickness of 3/4-inch..
The building code recognizes alternative methods and materials for various types of construction. Products that have received a numbered evaluation report from ICC Evaluation Service would fall under the category of “alternate materials”. There are several proprietary “one coat “ systems that have an ICC Evaluation Service listing. These products typically come premixed and may be applied in one coat with a second topcoat being applied at a later time. Always check the manufacturer’s installation instruction for proper application technique.
24
There are several types of acceptable top coats. Some are a portland based ďŹ nish while others are acrylic, elastomeric and even latex. The contractor should be aware of potential incompatibility between some of the ďŹ nishes and the base coat(s) due to alkalinity of the stucco.
25
Stucco - Mitcoplaster 600
26
Stamp : Spanish
Stamp : Texture skin
Stamp : Circular Roll
Stamp : Spanish
Stamp : English
Stamp : Spanish
Stamp : Smooth steel
Stamp : Spanish
Stamp : Finger swirl
AL HADAF
For Specialised Engineering Products
CO.
27
AL HADAF
For Specialised Engineering Products
28
CO.