CHASSIS REPAIRING EQUIPMENT BRAKE DISC ALIGNER
DUAL FUNCTION
DUAL FUNCTION CR0101 Functions
Multi-function disk brakelathe simultaneously equipped with vehiclemounted type and separated type. You can use separated type brake-lathe for the disk that is easy to detach, while vehicle-mounted type brake-lathe for the disk that is hard to detach.
CR0102
CR0103
CR0104
Features
-- Basing on the actual axis of rotation, completely solve the problem of brake pedal dithering, brake disc rust, brake deviation and brake noise; -- Eliminate the assembly error when disassembling and assembling the brake disc; -- Vehicle-mounted type avoiding the dissembling the disc to save time and labor; -- Convenient for the technicians to compare the run-out tolerance before and after cutting brake disc; -- Cost saving and time saving; -- Cut the brake disc when replacing the brake pads to assure the braking effect and prolong the life of brake disc and pads. -- CR0103/CR0104 could also be used to cutting brake disc off the car; Dualfunctions of the machine is definitely a money-making tools for workshops.
Specification Model
CR0101
CR0102
CR0103
CR0104
Drive Unit Working height min/max
100CM/125CM
50CM/70CM
100CM/125CM
50CM/70CM
55kg
53kg
78kg
75kg
Weight
CUTTER
98rpm
Electrical specifications
220v/50Hz 110V/60Hz
Ambient temperature range
-25to50°c
Noise
≤74dB
Cutter Max Thickness of Brake ≤40mm Disc Radius of Brake Disc
≤180mm
Feeding Speed
8.5mm/min
Power
12V DC
N.W.
7kg
Repair Principle
Precision Turning accuracy
≤0.0020.005mm
Brake disc runout
≤0.00-0.005mm
Brake disc thickness variation Brake disc surface roughness Ra
0.005-0.01mm
Provide universal clamp for meeting the demands of different types of cars
Ra 1.5-2.0µm
BEIJING SYLVAN AUTOMOTIVE EQUIPMENT CO.,LTD TEL: 86-10-56292661-10 86-10-56292661-16 ADD: Room 20C, Building A, Zhengdong International Plaza, Jia 2,Dongzhimen Waixiaojie, Dongcheng District, Beijing 100027, P. R. China WEB: WWW.SYLVAN.CO
CHASSIS REPAIRING EQUIPMENT
Drive speed
ON CAR BRAKE LATHE
CHASSIS REPAIRING EQUIPMENT
CR0105
Description
Specification
Provide variable speed and rotation torque during brake machining is a characteristic of this equipment The spindle rotation speed swivels within a certain range; this can eliminate the mechanical resonance and enable the machined surface to be smooth The 15-hp powerful motor can machine brakes for4-wheel drive automobiles, 1t trucks and even medium duty truck's rear wheels easily The micro-round cutter blade can undergo knock, it can be rotated by an angle after it has been worn to elongate its service life The brake lathe can be rotated180° To machine the automobile at its another side Lt is very convenient use because it is unnecessary to remove the bolts and move the arbor The unique twin-arbor design makes it be adjusted conveniently and the machining with high efficiency Semiautomatic operation system Automatic safety and shutdown system Fast connection system Intermittent feed mechanism makes the machined surface conform to be the demands of use
Max rotor turning diameter
Φ 360 mm
Max rotor thickness
51 mm
Max rotor friction surface area
76 mm
Feed distance
110 mm
Spindle revolutions
Variable speed 30-120 rpm
Motor power
3450rpm 1.1kW 1.5Hp
Electric power
AC220v 50/60Hz 15A
Overall dimensions (L × W × H)
787 × 457 × 381 mm
Packing dimensions (L × W × H)
1070 × 970 × 700 mm
NW / GW
144/194 kg
BEIJING SYLVAN AUTOMOTIVE EQUIPMENT CO.,LTD TEL: 86-10-56292661-10 86-10-56292661-16 ADD: Room 20C, Building A, Zhengdong International Plaza, Jia 2,Dongzhimen Waixiaojie, Dongcheng District, Beijing 100027, P. R. China WEB: WWW.SYLVAN.CO
BRAKE DRUM/DISC LATHE Developed and manufactured by us for maintenance of automobile brake drum/disc The machine is Polish in material use, with consummate process, advanced design, pretty appearance, high machining accuracy and efficiency, simple operation and maintenance, provided with perfect molds and clamps for car and light truck suitable for many types of cars Spindle feed adopts advanced infinitely variable speed design Feeding capacity can be adjustable within 005-05 at will, which brings very convenience for you Main castings of the machine is made of aluminum alloy material, whole machine weight is very light Variable speed gear adopts high quality alloy steel 38 CrMoAl and made of advanced process through nitrogenization, durability This machine can use single phase 220V civil electricity upon customer's request and 380V 3pH power electricity design, meanwhile, can design molds for special car type for user. Available to various types of cars including medium trucks
Quickly, accurately and efficiently to cutting rotor Fast and slow setting allow cutting rotor Quickly, accurately and efficiently to cutting drum Finitely adjustably setting allow cutting drum Three kinds of speed to choice for spindle speed A convenient design allows to quickly changing from rotor to drum Position of stop makes the lathe stop automatic after the cutting Fully equipped adapter package
CR0106
CR0108
CHASSIS REPAIRING EQUIPMENT
BEIJING SYLVAN AUTOMOTIVE EQUIPMENT CO.,LTD TEL: 86-10-56292661-10 86-10-56292661-16 ADD: Room 20C, Building A, Zhengdong International Plaza, Jia 2,Dongzhimen Waixiaojie, Dongcheng District, Beijing 100027, P. R. China WEB: WWW.SYLVAN.CO
BRAKE DRUM/DISC LATHE The lathe uses precision electric DC servo motors designed to meet the demanding requirement of industrial motion control The precision twin cutter tools and a quick drum to rotor changeover to help increase your service capability Infinitely variable spindle and cross feed speed settings allow for quick rough and precision finish cuts A convenient top storage tray means you can easy to take your favorite adapters and tools Separate motors on the drum and rotor feed help maximize the main motor's efficiency The variety of adapters enables you to machine all standard and composite rotors for foreign and domestic cars and light trucks Positive rake cutter tip angle provides for a one pass finish virtually every time, allowing you to complete your work fast
CR0107
CR0109
CHASSIS REPAIRING EQUIPMENT
Description Specification
CR0106
Spindle Travel
6-7/8” (175mm)
Spindle speed
70,88,118 rpm
Spindle feed speed
0.002"-0.02" (0.05-0.5mm)Rev
-
0.002"-0.02" (0.05-0.5mm)Rev
-
Cross feed speed
0.002"-0.02" (0.05-0.5mm)Rev
-
0.002"-0.01" (0.05-0.25mm)Rev
-
Hand wheel graduations
0.002"(0.05mm)
-
0.002"(0.05mm)
-
Rotor diameter
7" -15" (180mm-381mm)
7" -18" (180mm-457mm)
Rotor thickness
1-7/8” (48mm)
4" (102mm)
Drum diameter
6" -28" (152mm-711mm)
6" -28" (152mm-711mm)
Drum depth
6-7/8" (175mm)
9-7/8" (251mm)
Motor
CR0107
CR0108
CR0109
9-7/8" (251mm) 70,88,118 rpm
“Change Adapter " system eliminates the need for conventional bell clamps and cones and built-in springs ensure you don't lose them
1HP, OPTIONAL 220 – 240vac, 50-60HZ 1PH (0.75KW) 3HP, OPTIONAL 380 – 400vac, 50-60HZ 1PH (075KW)
Gross weight
290 kg
400 kg
Dimension (L×W×H)
970×920×1140mm
1100mm ×1070mm×1140mm
Accessories
BEIJING SYLVAN AUTOMOTIVE EQUIPMENT CO.,LTD TEL: 86-10-56292661-10 86-10-56292661-16 ADD: Room 20C, Building A, Zhengdong International Plaza, Jia 2,Dongzhimen Waixiaojie, Dongcheng District, Beijing 100027, P. R. China WEB: WWW.SYLVAN.CO
BRAKE DRUM/DISC LATHE Work Lamp---
Simple Convenience---
A work lamp can keep your work piece lighted even in dark area
A tool tray and tool board means you can easy to take tools and adapters
High Efficiency--A convenient design allows to quickly change from rotor to drum
Infinitely Speed---Variable spindle speed and cross feed speed provide a perfect finish
Perfect Finish---
Stop Switch----
The perfect finish meets or exceeds all OEM specifications
Two automatic shut-off switches make the motor of rotor and drum automatic stop after finishing
Safe Work Area--A chip bin can keeps your work area clean and safe
Single Pass----
Heavy Work Bench---
Positive rate tooling for optimum finish with a single pass
The heavy work bench can reduces vibration and chatter ensure the smooth finish
Low Tool Board----
CR0110
Function The fastest Brake drum/disc cutting machine in the world, machine is for repairing the brake drum or brake disc of automobile
Description Rotor diameter
4”-24”(102mm-610mm)
Maximum rotor thickness
285”(73mm)
Drum diameter
6”-28”(152mm-711mm)
Drum depth
9”(229mm)
Flywheel diameter
6”-24”(152mm-610mm)
Spindle weight capacity(standard 1” Arbor)
1501bs(68kg)
Spindle speed
70-320RPM
Feed rates-rotor and drum
0”-0026”(0mm-066mm)
Feed rate per minute
254”(645mm)
Motor
110V/220V 50/60HZ
Shipping weight
300kg
Dimension (L×W×H)
1130mm×1720mm×1750mm
BEIJING SYLVAN AUTOMOTIVE EQUIPMENT CO.,LTD TEL: 86-10-56292661-10 86-10-56292661-16 ADD: Room 20C, Building A, Zhengdong International Plaza, Jia 2,Dongzhimen Waixiaojie, Dongcheng District, Beijing 100027, P. R. China WEB: WWW.SYLVAN.CO
CHASSIS REPAIRING EQUIPMENT
A low board can put all adapters which you
MULTIFUNCTION PUNCH/ RIVETING MACHINE/RIVETER
This machine is used to disassemble, assemble, align, rivet and punch brake shoes in kinds of vehicles. It is also used to rivet friction discs Easy operation allows air-operation or foot drive to punch. This machine is used to punch copper or aluminum rivets in domestic/imported vehicles.
Item
Unit
Max diameter of rivet
mm
10
Max punching travel
mm
30 60000
Max output pressure
N
Max adjustment distance of punch
mm
30
Gas circuit working pressure
Mpa
0.4-1.2
CHASSIS REPAIRING EQUIPMENT
CR0401
CR0402
1.Max working height:210mm 2.Stroke:110mm 3. Span: 240mm
Specification
CR0403
BEIJING SYLVAN AUTOMOTIVE EQUIPMENT CO.,LTD TEL: 86-10-56292661-10 86-10-56292661-16 ADD: Room 20C, Building A, Zhengdong International Plaza, Jia 2,Dongzhimen Waixiaojie, Dongcheng District, Beijing 100027, P. R. China WEB: WWW.SYLVAN.CO
ELECTRIC HYDRAULIC PRESSURE RIVETING MACHINE This machine is applicable in a variety of sheet metal composite member cold riveting, especially suitable for trucks, tractors trailers, engineering and dump truck The riveting production and maintenance of beam reinforcement operations. The electrical control fluid pressure punching, riveting, to avoid the hot rivet in the steel plate between seam Gap, rivets produce the ills of the oxide layer and the cold shrink after loosening. The design of this machine is unique, versatile, depending on the desired purpose, the host Riveting bow with different specifications and other pressure equipment fuel tank connected to form a variety of different specifications riveting equipment and pressure equipment, by replacing Riveting head or mold, punching, riveting, knocking out old rivets and other operations. Maximum riveting force Ă˜18, motor transport dimension Repair industry to provide excellent riveting equipment. The series with models of single-bows and bow models, two bows of double-bow models can work simultaneously; differential work has a strong Convenience, in order to improve production efficiency.
CR0404
CR0405
Model
CR0404
CR0405
CR0406
Pressure (Mpa)
31.5
31.5
31.5
Range(mm)
160
150
140
Central Height(mm)
300
200
160
Diameter of Rivet (mm)
14-16-20
14-16
12-14
Span-diameter of nipper jaw (mm)
300
200
180
CR0406
CHASSIS REPAIRING EQUIPMENT
BEIJING SYLVAN AUTOMOTIVE EQUIPMENT CO.,LTD TEL: 86-10-56292661-10 86-10-56292661-16 ADD: Room 20C, Building A, Zhengdong International Plaza, Jia 2,Dongzhimen Waixiaojie, Dongcheng District, Beijing 100027, P. R. China WEB: WWW.SYLVAN.CO
HALF-AXLE SLEEVE PULLER AND PRESS
This machine is suitable for the 14 series 151,153 Red Rock, Steyr, SD, North Pennines, the first four after eight, Dongfeng king, Jiefang king Sleeve pipe without disassembly. Optional multiple pull Head. Applicable to a variety of add to the models of disassembly. Features: with high capacity(100-150-200tons), duplex pumps, high efficiency, wide application and good quality, this is a perfect equipment to dismount vehicle half axle sleeve.
150T
200T
CR0601
CR0602
CR0603
CHASSIS REPAIRING EQUIPMENT
100T
BEIJING SYLVAN AUTOMOTIVE EQUIPMENT CO.,LTD TEL: 86-10-56292661-10 86-10-56292661-16 ADD: Room 20C, Building A, Zhengdong International Plaza, Jia 2,Dongzhimen Waixiaojie, Dongcheng District, Beijing 100027, P. R. China WEB: WWW.SYLVAN.CO
STEERING COLUMN CHANGER
ELECTRIC 80T
CR0701
100T
CR0702
150T
CR0703
The machine uses manual hydraulic work is the establishment of various vehicles The pressure into the axial pressure. For liberation, Dongfeng, Steyr, Auman, Red Rock and other vehicle applications, but also as a small pressure Force machine to use, can be of various transmission gears, bearings, copper Set disassembly. Its main characteristics: high pressure, easy to use, saves time and effort.
MANUAL 80T
CR0704
100T
CR0705
150T
CR0706
100T
CR0707
150T
CR0708
The machine uses manual hydraulic work is the establishment of various vehicles The pressure into the axial pressure. For liberation, Dongfeng, Steyr, AumanďźŒRed Rock and other vehicle applications, but also as a small pressure Force machine to use, can be of various transmission gears, bearings, copper Set disassembly.
BEIJING SYLVAN AUTOMOTIVE EQUIPMENT CO.,LTD TEL: 86-10-56292661-10 86-10-56292661-16 ADD: Room 20C, Building A, Zhengdong International Plaza, Jia 2,Dongzhimen Waixiaojie, Dongcheng District, Beijing 100027, P. R. China WEB: WWW.SYLVAN.CO
CHASSIS REPAIRING EQUIPMENT
PNEUMATIC
STEERING COLUMN CHANGER Remarks This machine is used for extruding out and in the columns of automobile so as to solve fully the problem that disassembling and assembling column pins are difficult and reduce labor intensity of maintainers. Its features are that this machine can be adjusted at random during removing column pins.
Model
CR0709
Working stroke of oil cylinder
90mm
Maximum working pressure Maximum outer diameter of removing bearing Maximum rated pressure
40KN 180mm 40MPa
CR0709
Brake hub disassembly and assembly overturning stand
CHASSIS REPAIRING EQUIPMENT
1. Design is unique, appearance is neat and structure is reasonable 2. Operation is convenient, reducing labor intensity and improving efficiency 3. Foot-operated hydraulic drive, lifting is flexible Carrying weight(kg)
Jack range (mm)
Applicable hub diameter mm
External dimension mm
Machine weight
160
390-610
320-500
775x715x820
98
CR0801
BEIJING SYLVAN AUTOMOTIVE EQUIPMENT CO.,LTD TEL: 86-10-56292661-10 86-10-56292661-16 ADD: Room 20C, Building A, Zhengdong International Plaza, Jia 2,Dongzhimen Waixiaojie, Dongcheng District, Beijing 100027, P. R. China WEB: WWW.SYLVAN.CO
Horse nut disassembling and assembling machine
CR0901
Model
CR0901
CR0902
CR0903
Output Speed
14r/min
14r/min
23r/min
Motor Power
3kw
4kw
4kw
Rated Torque
400kg/m
450kg/m
500kg/m
Voltage
380V
380V
380V
Max.Torque
420Kg/m
470Kg/m
520Kg/m
CR0902
CR0903
T01 T02
T05
T03
T06
T04
T08 T07
Square head gimbal (360째) signal line
T18 T19
T09 T10
T14 T16
T05 T12
T13
T15
Head assembly 360째 spin &small Angle adjustable angle signal line
Head assembly Feature 1. Square head gimbal (360째) 2. Handpiece can be arbitrary adjustable angle 3. Handpiece small and low 4. Low maintenance cost
Transmission assembly feature: 1.Alloy steel transmission,compact structure,sealing well ,no engine oil. 2.Motor high efficient, large torque.
Transmission assembly feature: 1. All-steel transmission and use a long 2. External appearance is very large and steady &safety. 3. Motor high efficient, large torque. 4. Low maintenance cost
BEIJING SYLVAN AUTOMOTIVE EQUIPMENT CO.,LTD TEL: 86-10-56292661-10 86-10-56292661-16 ADD: Room 20C, Building A, Zhengdong International Plaza, Jia 2,Dongzhimen Waixiaojie, Dongcheng District, Beijing 100027, P. R. China WEB: WWW.SYLVAN.CO
CHASSIS REPAIRING EQUIPMENT
CR0903