Wynnstay Iodine Pre-post RTU PI

Page 1

WYNNSAN IODINE PRE/POST RTU  Teats can be sprayed or immersed  Contains the power of Iodophor & Lactic Acid  Contains Glycerine for superior teat condition  Low pH level without causing irritation  Easy to apply with low wastage

Pack Size [Product Code] 25L [55645], 200L [55646] & 1000L IBC [55647]

Application PRE-MILKING Clean teats pre-milking routine: 1. The product should be used directly from the container without dilution. 2. Dry wipe udders with a paper towel. Use one disposable towel per cow. 3. Forestrip each teat. 4. Fill teat cup 2/3 full of product and immerse each teat ensuring that the entire surface of the teat is covered OR Spray the full length of each teat. Allow a minimum contact time of 30 seconds. 6. Refill the teat cup as necessary. Teat cups should be emptied after use and washed before re-use. 7. Dry teats thoroughly with a paper towel to remove iodine residue. Use one towel per cow. POST-MILKING 1. The product should be used directly from the container without dilution. 2. Fill teat cup 2/3 full of product and immerse each teat ensuring that the entire surface of the teat is covered OR Spray the full length of each teat. Allow a minimum contact time of 30 seconds. 3. Refill the teat cup as necessary. Teat cups should be emptied after use and washed before re-use. 4. Wash and dry udder and teats before the next milking.

Storage Store in a dry area away from sources of heat or ignition and above freezing

Shelf Life 2 years from date of manufacture

FOR HEALTH & SAFETY INFORMATION, REFER TO THE SAFETY DATA SHEET Wynnstay Group PLC. Eagle House, Llansantffraid, Powys, SY22 6AQ TEL: 01691 828512 Fax: 01691 828690 Company no 2704051 Registered in England and Wales

VAT no 159 1866 30


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.