L S E R I E S | PR E- CHARGED (A SME ) E XPANSIO N TAN K
|
File No: 37.52 Date: april 21, 2016 Supersedes: 37.52 Date: november 24, 2016
S U B M I T TA L
Contractor:
Date:
Submitted by:
Date:
Approved by:
Date:
data
m aterial s o f co n struc tio n
Model no. ordered: Tag no.:
Qty: Charge pressure:
Shell: Carbon steel psi/kPa
Optional California sight-glass and seismic clips: Yes No
o per atin g co n ditio n s
Temperature Range: 40°f - 240°f (4.4°c - 115.5°c)
ba s.
Standard factory charge is 12 psi (83 kPa) unless otherwise specified.
Bladder: Heavy Duty Butyl
Maximum Pressure: 125 psi (862 kPa)
n ote s • Not for Domestic Potable Water Systems.
ht
tp
://
xb
om
• Designed and constructed per asme, Section viii, Division 1. • California code sight-glass and seismic clips available as an option. • Allow a minimum of 18" (457 mm) clearance for system piping.
t y pic al s pecific atio n Furnish and install, as shown on the plans, Armstrong Model ______-l asme pre-charged bladder Expansion Tank, stamped for 125 psi (862 kPa) workingpressure. Each tank will be supplied with a heavy duty butyl replaceable bladder. Tank shall be supplied with a ring base, lifting rings, and npt system connection.An air charging valve connection (standard tire valve) shall be provided tofacilitate adjusting pre-charge pressure to meet actual system conditions.
http://xbombas.com
Order no.:
6731-0616
Engineer:
5378-7190
Representative:
5305-9179
(55) 5370-9692
co m
Job: