Street Rod Life Spring 2015 by Xceleration Media

PREMIER ISSUE!

BACK TO LIFE!

McMullen’s A100

ODE TO THE

P-51 JOHN CALLIES’ ’40 CHE’PON

GNRS RECAP LOOKIN’ GOOD

AFTER 66 YEARS

PURE VISION’S

STEVE STROPE TALKS STREET RODS

36584 25557

SRL2015-1

HOT NEW PRODUCTS!

PUBLICATION OF XCELERATION MEDIA Vol. 1, No. 1

STREETRODLIFE.COM #StreetRodLife

CLUB SCENE RELAXED ATMOSPHERE

EVENT PREVIEW GOODGUYS 2015 SEASON

HIT THE ROAD! UPCOMING EVENTS

Todd Ryden

tryden@xcelerationmedia.com

Welcome to Street Rod Life

Thanks for picking up Volume One, Number One of Street Rod Life! We’re looking forward to bringing you the world of street rodding fun from the shows, races, local speed shops, and even your home garage. Street Rod Life is part of a family of automotive media properties from Xceleration Media, including four other publications, that are available online and in print. For Street Rod Life, we’ll be delivering four print issues in 2015 and you can check out our website, streetrodlife.com, for daily coverage of what’s new and happening in the rodding world along with feature stories, tech, and event coverage. One thing I would like to address right up front is the term “street rod.” Many enthusiasts used to place a year of manufacture as a designation on what defines a street rod. In this old-school way of thinking, a street rod was considered to be a vehicle manufactured in 1948 and prior. However, to the team at SRL, we feel the term ‘street rod’ has evolved to include newer cars as well. In fact, it seems that the term ‘street rod’ can be used to describe nearly any car or truck that has been modified to look or perform better than when it was new. If a ’59 Bonneville has a modified and detailed engine combined with a killer stance, isn’t it as much of a street rod as a ’39 two-door sedan? What about a ’69 Chevelle or a ’68 GTX? Sure they’re known as muscle cars, but what makes them any different in terms of pigeon holing them as only a muscle car? For instance, consider the term “hot rod.” Hot rods came about from the earliest days of our hobby as a term coined to explain taking an old jalopy and modifying it for speed and performance. Today the term hot rod is used widely from ’32 Fords to ’15 Mustangs. They’re all hot rods and you know what? They’re all street rods. As another example, think about what kind of music you listen to. Whether it’s punk, classic, metal, surf, oldies, or hip-hop — it is all still music. A street rod can be a muscle car, traditional hot rod, wild custom, or even a modern muscle car. Street rodding to us is how you build it and what you do with it. We’re all in this for the love of vehicles, to build them and to drive ’em. That is the street rod life. I like them all and no matter what you call them, we plan to bring you examples of some of the coolest cars we can find as our team travels across the country to cover shows, cruises, and events. Our coverage will be predominantly based on ’72 and older cars with a focus on pre’64, simply because that is where many shows and products fit, but you may see a few other surprises every now and then. Tech-wise, we plan to deliver a good mix of old and new, from the 331c.i. Hemi all the way up to the 6.2L version in the Hellcat. Thanks again for checking out the new magazine and be sure to check us out on the web at StreetRodLife.com. If there’s anything cool going on in your area or garage, drop me a note or like us on Facebook. I’m looking forward to hearing from you and will see you on the road. Todd Ryden tryden@xcelerationmedia.com

Staff Group Publisher Shawn Brereton Editorial Director

Todd Ryden

Senior Tech Editor

Jeff Smith

Tech Editor

Richard Holdener

Contributors Tommy Lee Byrd Brandon Flannery Louis Kimery Manufacturers Advertising Dave Ferrato

Ron Ceridono Dan Hodgdon Barry Kluczyk

Brett Underwood

For advertising inquiries call 901.260.5910.

Production

Hailey Douglas

Art

Jason Wommack Zach Tibbett

Street Rod Life is published quarterly to promote the growth of street rodding as well as recognize the parts and services from participating manufacturers. The magazine consists of dedicated information from partner companies with the mission of disseminating unfiltered editorial on companies, products and services directly to street rodders and fans. Editorial content and advertisements for each issue can originate from partner companies participating in the magazine. Street Rod Life is a hybrid of content that was originally published at StreetRodLife.com and original content that was created for this quarterly print magazine. Magazine distribution occurs through direct distribution from parent company Xceleration Media, its partner companies, and marquee events throughout the year. Street Rod Life is a property of Xceleration Media. No part of this magazine may be reproduced without written consent from Xceleration Media. All rights reserved. Printed in the USA.

Cover ON THE

PREMIER ISS

UE!

John Callies’ 1940 Che’Pon pays homage to the P-51 fighter and the Greatest Generation. The ’40 pickup and the ’64 GTO have both been modified with wheels, stance, paint, and under the hood. In our world, they’re both street rods.

BACK TO

McMullen’sLIFE! A100

P-51

ODE TO THE

JOHN CALL IES’ ’40 CHE’PON

GNRS RE CAP

LOOKIN’ GOOD AFTER 66 YEAR S

PURE VISION’S

STEVE STROPE TALKS STREE T RODS 0

36584 25557

SRL2015-1

STREETRODLIFE

.COM

SRL2015-1_

v2.indd 1

PUBLICATIO XCELERATI N OF ON MEDIA

HOT

Vol. 1, No. 1

#StreetRodLife

CLUB SCENE RELAXED ATMOSPHE RE

NEW PRODUCTS!

EVENT PREVIEW GOODGUYS 2015 SEASON

HIT THE UPCOMINGROAD! EVENTS

2/17/15 9:15 AM

INSIDE... STREET ROD LIFE Vol. 1, No. 1

COVER STORY

WHAT IS A CHE’PON?

A hybrid of power, style, and engineering

FEATURES

DEPARTMENTS

32 GOODGUYS GOODTIMES 38 MCMULLEN’S STEPCHILD 48 FUTURISTIC STREET ROD 66 IF THE SHOEBOX FITS 76 ENGINE BLING 90 A T-BUCKET LIST

01 FIRE IT UP 04 RPM REPORT

46 THE STREET ROD LIFE 70 CLUB SCENE

06 DIGITAL DETOUR

ROD LIFER 85 STREET OF THE MONTH

Preview of the Goodguys season ahead Restoring the A100 to ’70’s glory

An Ecoboosted 33 Ford Roadster

’56 Chevy saved from a Tennessee Barn Induction systems that will make you drool Detroit Speedcraft can check it off for you

Letter from the Editor News for the Street Rod World Street rodding sites, forums, and apps

David Sanchez is all smiles about cars

86 ROD SHOTS

10 VIDEO PLAYLIST

94 HIT THE ROAD 96 BEHIND THE DOOR

All the social media info in one place Cool videos you will want to check out

Ron Ceridono thinks about hot rod sounds

STREET ROD LIFE Vol. 1, No. 1

Kick back with Relaxed Atmosphere

07 SOCIAL BUZZ

THE 12 INPASSENGER SEAT

A little help from my friends

Moments that capture street rodding Upcoming events not to miss

A view into the garage of a true rodder

14 THE GRAND ONE SHINES

18 QUICK CRUISE

48 FUTURISTIC STREET ROD

80 PLANNING FOR EFI

TECH

Parts Store

After 66 years, GNRS is still looking good

An Ecoboosted ’33 Ford Roadster

20 INS AND OUTS OF FASTENERS 28 UNDERSTANDING SPARKS 42 GET THUMPED 54 STALLING OUT 72 SET IT RIGHT 88 OLD CAR = NEW OIL Everything you need to know about bolts Ignition history and how it has improved Making that street rod sound

Picking the right converter for your street rod How to set valve lash on any engine Your hot rod needs different oil

We chat with Prue Vision’s Steve Strope

Be prepared to take the plunge

Bootlegger Cams Lunati........................................................... 58 Direct Bolt-in Aluminum Radiator Flex-a-lite........................... 59 RS-1 Highback Sport Seat Jegs............................................... 59 Quick Cool Carb Insulator Kit Quick Fuel Tech......................... 59 EZ-EFI Fuel FAST...................................................................... 60 Rams Horn Exhaust Manifold Flowtech Exhaust....................... 60 American Classic Radials Coker.............................................. 60 Muscle Car 5 Trans McLeod..................................................... 61 EZ Rub Fortified Penetrating Oil Bed Wood and Parts............. 61 SBC LS Valve Cover Adapters RHS........................................... 61 LS EFI 8 Stack System Inglese................................................. 62 Universal Brake System Kit Speedway Motors......................... 62 Quadrajet Carbs Jet Performance Products............................... 62 Transmission Packages TCI...................................................... 63 HEI Distributor Crane Ignition.................................................. 63 Heavy Duty Alternator Kit Flaming River................................... 63 Replacement Floor Pan CARS inc............................................ 64 ’68-’72 F-100 Brakes Baer...................................................... 64 Carb Defender Driven Racing Oil.............................................. 64 ’68 Chevelle Wiring Harness Painless...................................... 65 Frame FX Kit Hellwig................................................................ 65 HE Die Cast Aluminum Rockers COMP Cams........................... 65 STREETRODLIFE.COM

NEWS HOT TOPICS INFO

RPM REPORT

Xceleration Media to sponsor giveaway MSD, Accel merger could at Street Machine National events Submit car images to Facebook to be eligible for Gearhead Powerpack Giveaway

Xceleration Media, parent company of Street Rod Life, has just announced the Gearhead Powerpack Giveaway, in conjunction with the Street Machine Nationals. Contestants can submit photos of their car on the Street Rod Life, Power and Performance News, or Gearheads4Life Facebook pages. Photos will be voted on using the Like button. From the top-three Like-getters, the editors for each site will then choose the car which they feel best represents their brand. Eligible contestants must be able to attend the event with their car, where they will get the VIP treatment: Free registration for the vehicle and one free passenger into the Street Machine National event. Free VIP parking in a designat-

ed area within the event signifying you are the Gearhead Powerpack Giveaway Winner. The winning car will be highlighted in the Xceleration Media print magazine correlating to the website from which it was chosen.

Winners will receive:

One gift certificate for $150 from COMP Cams One gift certificate for $100 from FAST One gift certificate for $100 from TCI One gift certificate for $100 from ZEX One gift certificate for $100 from RHS One free case of Driven Hot Rod Oil

RideTech introduces 48 Hour Corvette Transforming a car or truck, no matter what its shape, into something better is what hot rodding is all about. On May 16–18 of 2011, RideTech attempted to take hot rodding to a whole new level with the 48 Hour Camaro build. Did they succeed? Oh yes they did. That ’67 Camaro has been on the road competing in events across the country ever since. The time has come to introduce the 48 Hour Corvette. On March 10th, they will once again attempt what many believe to be an impossible build. A typical eBay purchased 1972 Corvette will roll into the 48 Hour build center to be transformed into a fully equipped track monster. The build will take place over three sixteen-hour 4

STREET ROD LIFE Vol. 1, No. 1

workdays. The entire build will be live streaming on YouTube, with manufacturer specific question and answer sessions, and interviews throughout. As the C3 is disassembled, the parts that are not being reused will be available for purchase on eBay.

How do they properly finish off a build of this nature? They take the car straight to the track after completion, that’s how. Full details about the build will be updated daily leading up to the build at 48hourcorvette.com.

create new technologies

For years, when it came to ignition coils and plug wires, there were two main colors — red and yellow. You either had MSD components or Accel parts creating the sparks. Sure there were, and still are, a few other options out there, but there is no denying the popularity and market share of these two long-time rivals competing in the performance ignition market. However, as of 2015, the red and yellow lines are blurring as the MSDP Group (a portfolio company of Z Capital Partners) acquired Accel Performance Group, which includes Accel, Mr. Gasket, Mallory, Lakewood Quicktime, and Hays brands. MSD and Accel, along with Mallory, all firing as one. Years ago, Vegas would have had some steep odds on that mix of brands coming together, but in the new world of big business and finance, along with the bundling of buying power, engineering resources, and distribution, it is not that big of a surprise. Hopefully this acquisition will produce some new products and technology that will help street rodders, especially as the worlds of ignition and fuel control technologies blend together.

NEWS HOT TOPICS INFO

RPM REPORT

Collector Car Appreciation Day is coming The SEMA Action Network (SAN) announced that this year’s National Collector Car Appreciation Day will be celebrated on July 10. The date will mark the sixth consecutive commemoration of what is now an annual event to raise awareness of the vital role automotive restoration and collection plays in American society. Plan to drive your rod to work, drop the kids off at sports, pick up groceries or just take it for a spin! “The passion for the collector car hobby that continues to be demonstrated by SAN members nationwide is most clearly evident in this special day,” says Steve McDonald, SEMA Vice President of Government Affairs. Intended to celebrate the classics of

the past and the future, the U.S. Senate helped launch Collector Car Appreciation Day by passing resolutions each year at SAN’s request. The Senators have been strong advocates for the automotive hobby in Washington, D.C., and recognize the integral role collector cars have played in fostering our nation’s appreciation for the automobile’s unique historical place in our history.

The states of California, Louisiana, Michigan, and New Mexico, along with the Canadian Provinces of British Columbia, Manitoba, and Nova Scotia, adopted their own resolution this year commemorating the day. Check out semasan.com for more information about how SEMA is working to help keep our hobby moving forward with legislative updates and concerns.

Flaming River receives ISO certifications

COMP Cams to present the Thumpr Award at NSRA Events COMP Cams has teamed up with the NSRA again in 2015 to award one diehard enthusiast at each of the NSRA events with the “Thumpr Award.” This award is presented to a vehicle and owner that stands out from the crowd and captures the true essence of American muscle and street rodding. Unusual and unique builds, and engine combinations that set a car apart

from the norm are what the Thumpr Award is all about. Each winner receives a custom trophy with the Thumpr rabbit. The first NSRA event where a Thumpr Award is up for grabs will be the Southwest Street Rod Nationals on April 10–12 at the State Fair Park in Oklahoma City, Oklahoma.

Congratulations to the team at Flaming River for receiving their ISO 9001:2008 Quality Management Systems standards. Receiving this documentation means that their manufacturing processes and products are certified to world-class specifications for quality, safety, and efficiency and they meet or exceed the needs of their customers and the standards of manufacturing excellence, as set forth by the guidelines of ISO 9000 and OEM standards per the regulatory authorities. The ISO 14001 Environmental Management System standards ensure that Flaming River minimizes its operational impact on the environment, continues to maintain and improve its environmental processes, and is in compliance with all applicable statutory and regulatory requirements. STREETRODLIFE.COM

SITES APPS FORUMS TRENDS

DIGITAL DETOUR With all of today’s technology, the digital world can be overwhelming. Let’s face it, with so many websites, forums, apps, social media, and everything else out there, it can be pretty tough to navigate through it all to find the information you need. Here at Street Rod Life, we’re constantly wading through all of that nonsense and have come up with some of the best sites, apps, and other resources to help you make it to the show.

Websites Muscle every week

If you love muscle cars, be prepared to spend a lot of time in front of the computer screen. This website has a massive video collection of incredible Mopar, Ford, Chevy, and B-O-P iron ranging from rare cars to one-off racers. You can search through a list for your favorites or just sit back and start watching them all. Do yourself a favor and sign up to get updates automatically. musclecaroftheweek.com

Forums Just for hot rodders

A continuous list of questions and answers about building a hot rod with threads based on suspension, engine, interior, tools, and the basics. Everyone is on the same page and wants to help each other out. We searched out information on Slim Jim transmissions, juice brake updates, Strombergs, and more with a great number of results. It’s all about hot rods and fun. hotrodders.com/forum

Pontiac/Oakland info

This is the home base for the Pontiac/Oakland Club (and GMC) with a wealth of information for members and friends. The site has a forum, classifieds, and plenty of data to connect owners and share their vehicles. Pontiac and Oakland owners have a deep appreciation for the history of their cars and will help you with your restoration project or fill in the blanks of your vehicle’s history.

STREET ROD LIFE Vol. 1, No. 1

If you dig Edsels, or maybe are curious to learn more about the short-lived Ford off-shoot brand, this site has it all. Do you know the key points to recognize a ’58 from a ’59? How about the difference between a Bermuda wagon and a Villager? You will, once you spend some time on this informative site. History, time lines, production, and resources for owners and enthusiasts.

poci.org

Chevy truck fans

If you’re into Chevy trucks, this forum has everything you’ll need. The forums are broken out in years ranging from ’47 through modern day rigs, but there’s an emphasis on the classics. Don’t let the domain name fool you, the site started with emphasis on ’67–’72 models, but has grown to include ’47–’59 pages, ’60– ’66, the square bodies and newer models. 67-72chevytrucks.com

Street rodding news at your fingertips Street Rod Life has made it as easy as possible for you to receive the information you are looking for in the format you feel most comfortable with. Whether you get your information on a laptop, tablet, or your phone,

All that is Edsel

we’ve got you covered so you can get the latest street rod information straight from the source. Our content is updated daily, so check often with Street Rod Life through any of the social media options on the right.

History lesson in Ypsi

In the historic town of Ypsilanti, Michigan, you’ll find the last operating Hudson dealer which now houses the town’s Automotive Heritage Museum. The museum has some very cool vehicles on display and they’re actually right down the street from the original Tucker household (which is under restoration). If you’re into Tuckers, Kaiser Frazer, or Apex Motors, check out this gem of history.

edsel.com

All about Flatheads

This forum has the answers and info for everything about the Ford Flathead. Interested in interacting with street rodders who cast their own Flathead parts? There’s a forum for that. If you’re simply looking to research a strange intake or want the latest racing updates for Flatties, look no further! flatheadsrus.com

ypsiautoheritage.org

Stude site

Not only is this forum chock full of Stude-specific speak, it’s loaded with over 10,000 members that are ready, willing, and able to share their tips on everything Studebaker. The backbone of the forum is the base for the Studebaker Drivers Club Inc., which has been around since 1962. Need info on a thermostat to fit a ’37 President? How about the timing tab of a 259c.i. engine? Serious site for serious studes. studebakerdriversclub.com

FACEBOOK

facebook.com/StreetRodLife TWITTER

@StreetRodLife YOUTUBE

youtube.com/StreetRodLife INSTAGRAM

instagram.com/StreetRodLife

APPs

OF OUR EYE

ROAD TRIP

Road Trip is the fastest and easiest app for tracking of your car’s fuel economy, maintenance history, and expenses. This app is great for keeping everything you need all in one place. It helps you keep track of expenses, maintenance schedules, and lets you log your tires to track winter and summer usage. It lets you know what kind of fuel economy you are getting, which helps with the trip cost calculator, as well as figuring distance-to-empty. The app takes all of that information and presents it to you in a comprehensive graph full of statistics — all on a single screen.

DigiHUD SPEEDOMETER

DigiHUD Speedometer is a free GPS-based digital head up display (HUD) for Android that shows useful speed and distance information for your journey. This app is ideal if your vehicle’s speedometer has died or you want to verify your vehicle’s speed. The display can be switched between normal viewing and HUD mode, which mirrors the display for viewing as a reflection in a vehicle windshield (most useful at night, depending on the device’s brightness). For more detailed information on these apps, including where to download them, head over to StreetRodLife.com.

FACEBOOK TWITTER MULTIMEDIA

SOCIAL SPIN We recently posed the question below to the 120,000+ fans of the Street Rod Life Facebook page. Passion runs deep in our hobby and we found responses that were, funny, poignant, or just downright crazy. Below is a hand-picked sampling of the best. Got an opinion on this matter? We want to hear it on Facebook.com/ StreetRodLife or via any of our other social media channels listed below.

What do you think of the decision of many street rod shows opening up to post-’49 vehicles? ERIC JEFFRIES

Whatever the reason for the change is not a concern, because these days people have different conditions on what they classify as a street rod. Its exact age is not an issue as is the way in which it is presented, or type of build. I grew up in the 70s and 80s and I have seen rods from the early 1900’s all the way up to present and have not had a problem considering them to be a street rod.

Contemporary Classic

POPULAR

Here are some addtional articles that didn’t make the print issue, but are worth checking out. Search for these titles at StreetRodLife.com.

VEHICLE SHOWCASE

DANIEL HEEMAN

I’m a bit younger, and I own a ’37 Plymouth. That being said, I have love for almost all cars. Exclusion shouldn’t happen. I would love a ’70 boss sitting next to mine. Two beautiful cars from two different eras. Both deserve attention.

Contemporary Classic World’s Wildest Willys Resurrected A Brand Spankin’ New ’55 Chevy Pickup

ED BALCOMB

The National Street Rod Association says a street rod....is to 1948. Probably because of the straight axle being used. ’49 didn’t use it. BUT. MANY shows wouldn’t know what a street rod is if you parked it on the mayor. Sad…or...they don’t care. I’ve seen a lot of street rod classes with newer than ’48 cars in it.

SCOTT MCGLATHERY

I think it is a good Idea to open up to at least to 1972. Anything more than 1972 is a waste. The Muscle Car Era is the Coolest to me!!

Creature Comforts Hidden within a ’54 Buick

TECH Installation of TCI 6X Six-Speed Transmission in Project “MaxStreet” Chevy Big Cam on the Street? How to Improve Driveability

DOUGLAS STORY

Why not? Time moves on, shouldn’t the date of acceptable street rods move as well?

JAY GOUDELOCK

I think it is a good idea to keep future generations involved.

GERALD BETTY THOMPSON

Great idea! It’s good to get a lot of young people like the NSRA was in the early ’60s and ’70s.

JOIN THE CONVERSATION Street Rod Life is active on all major social networks and digital content publishing platforms. Join us as we spread the word about street rods around the world.

FACEBOOK

YOUTUBE

TWITTER

facebook.com/StreetRodLife @StreetRodLife

youtube.com/StreetRodLife pinterest.com/Xceleration

#MUSTFOLLOW These are some of our favorite Twitter personalities. They’ll keep you entertained & informed about all things street rod.

@RRRawlings Richard

@Kindigitdesigns Kin-

Rawlings is the owner of Gas Monkey Garage and star of the Discovery channel show Fast N’ Loud, where Rawlings and crew track down cars to restore and resell.

dig-It Design based out of Salt Lake City, has been customizing and restoring hot rods for over 16 years. They can be see on Bitchin’ Rides on the Velocity channel. Follow these guys to see some cutting edge custom work.

@chipfoose Chip Foose is a hot rod shop owner, automotive designer, and fabricator, as well as the star of the television series Overhaulin’. Follow him if you’d like to see as he works on his latest projects and showcases his completed builds.

@royboyprods Here is a great follow if you like to see photography of custom cars and hot rods. Along with their photos they usually have links to their website where you can read more about the car featured in their tweet.

Record Runs at Sunrise

Witnessing sunrise over the Bonneville Salt Flats is truly a religious experience. For racers, it’s extra special to behold, because it means you’re in the impound lot preparing to parade down to the starting line for your backup run and a new record. Could it really get any better than that?

STREET ROD LIFE Vol. 1, No. 1

RACING PRODUCTS ENTERTAINMENT

VIDEO PLAYLIST Video Playlist consists of interesting videos we came across on the Internet. Whether historical, funny, dramatic, or technical, we thought they might be of interest to our street rod community.

Scan QR Code to watch now!

Behind the Scenes: Che’Pon

Want to see and hear more of the 1940 Chevy from our cover story? You’re in luck. We have video of the owner, John Callies, talking about the build process. Check out the parachute test on the interstate! For more on the Che’Pon see page 22. vimeo.com/104944316

The Race of Gentlemen

Here is a video for you race fans. Hold onto your seats while vintage motorcycles and automobiles battle it out on the beach against the rising tides for your viewing pleasure. The video captures all the fun that can be had during The Race of Gentlemen in Wildwood, New Jersey, on the first weekend of October. youtu.be/Qz8VNE7B_18

Subscribe to our YouTube channel to keep up with our original and curated video content that is updated frequently by the Street Rod Life editorial staff. youtube.com/StreetRodLife

STREET ROD LIFE Vol. 1, No. 1

Ron Berry’s Creations

Watch Ron Berry go for a spin in his cartoonish styled Volkswagen bus that you can see in this magazine on page 15. youtu.be/XcgPuj5jt4I

Art Morrison 1955 Bel Air

The Smoking Tire hits Supercar Sunday and the canyons with the Art Morrison 1955 Bel Air, one of the best-handling hot rods around. Watch as they toss this 60-year-old car through some of the tightest curves in California to find out if there really is such a thing as a hot rod for drivers. youtu.be/QEZpnBAilCY

RACING PRODUCTS ENTERTAINMENT

VIDEO PLAYLIST

1932 Ford Highboy Roadster

In this episode of Jay Leno’s Garage, Jay talks about one of the most iconic hot rods of all time, the Ford Highboy roadster. This particular car is owned by Bruce Meyer and was actually the first hot rod to grace the cover of Hot Rod magazine. youtu.be/_eqiSoO3zPI

Royals Hot Rod Club

Flame Show

This one is fun to watch multiple times. Wild Thang, is probably one of the wildest street-driven hot rods around because of its crazy powerful engine. The 10-liter Arias engine with a BDS Blower puts out around 3000 horsepower and is capable of putting on quite the show with flames. youtu.be/U2sxQTEKbyM

Here is great short film about the New Zealand hot rodding scene. In the video, we get to hear from members of the Royals hot rod club, and how they got into rodding. These guys love getting together to show off their rides with other fellow enthusiasts, but enjoy keeping their meets small so it doesn’t take away from the joy. youtu.be/6kwjsYjMt6w

Build Time Lapse

Check out this time lapse of the entire build process for a 1951 Ford, right up until the reveal of the car at the Chattanooga stop of the 2013 Hot Rod Power Tour. There are over 26,000 photos shown in this video. It’s long, at over 15 minutes, but a rare glimpse at the making of a custom street rod, up close and personal. youtu.be/xuhWtudk98k

Ricky Bobby’s Rod Shop

This video showcases a 1929 Ford Model A hot rod, shot Ricky Bobby’s Rod Shop, where they built the car in thirty-three days. The old 49 Mercury Flathead engine running isn’t the only cool feature. It’s all cool. youtu.be/hLBXCzqeo88

Satan’s Rat-Rod

Meet Gretchen, one of the coolest rat-rods we’ve ever seen and a ride that turns heads wherever it goes. The engine is out of a 1952 Diamond-Reo tractor and makes 1,640 lb.-ft. of torque. The chassis is pieced together from old light poles from the City of Hollywood. The body... that’s from a 1931 Ford. youtu.be/xxRp1zFxKBY

Gasser Out Of Its Element

A 1957 Chevrolet gasser-style drag car runs the autocross and gets a surprisingly not terrible time. Despite its stance, it never lifts a wheel off of the ground either. Of course, countless cones were run over due to visibility issues. youtu.be/WbpRkil_6kc

Rocketbird

We love finding videos of beautiful custom rides and this one is no exception. Take a look at this elegantly-built ’62 Ford Thunderbird out of New Zealand. youtu.be/xEk94oIb42Y STREETRODLIFE.COM

with Ron Ceridono

Sounds of Street Rod Life Editor’s Note: With every issue of Street Rod Life, we’re going to ask a friend within the street rod community to pen a column about their life in cars. We were excited when Ron Ceridono said he’d be happy to explain where his love of engine exhaust notes started. You’ll recognize Ron from his technical articles in Street Rodder magazine and several books such a, The Complete Chrysler Hemi Engine Manual, A Guide to Building a ’32 Hot Rod, and his work with Tex Smith’s hot rod titles.

ike many little kids growing up in the early ’50s, I cruised the sidewalks of my neighborhood in a pedal car. There were impromptu races with my buddies and Saturday mornings most of us washed our miniature cars, while our Dad’s did the same to their full size versions. Little did we know these were all signs of things to come. About the time that some of us began paying attention to real cars, an old married couple, probably in their mid-twenties, moved into the neighborhood. They drove a baby blue ’49 Chevy with a split manifold and dual exhausts that could be heard from miles away. To some on the block — namely most of the parents — that car just made noise. But to budding gearheads, it made music. Impressed not only by the sound, but the dual chrome tips that stuck out below the Chevy’s bumper, I asked Dad about putting dual pipes on my sidewalk rod and he obliged by hanging a pair of brass pipes on the tail end. By the time the pedal car ended up in the garage rafters, the staccato of the Chevy six was eclipsed in my mind by the sound of my older brother’s ’37 Ford with dual Smithy mufflers. Not long after installing the twin pipes, a neighbor showed us how to use pennies to block off the heat risers in the block, which was supposed to increase performance but also resulted in a much sharper exhaust note. He was the neighbor who had a Y-block powered ’54 Ford that rattled every window in town, thanks to an exhaust system made from a pair of early-Ford torque tubes without mufflers. That car was cool and I loved the sound, although the local constabulary did not share my appreciation. None-the-less, the die was cast and I was hooked on street rods and how they sounded. The ’60s were a great time for the sounds of muscle cars. The exhaust note of the 409-powered Chevy belonging to the rich kid a few blocks away was un12

STREET ROD LIFE Vol. 1, No. 1

mistakable, as was the rumble of the ’65 GTO a buddy got for a high school graduation present. There were Mopars with wedge and Hemi motors that made a strange sort of echo in the pipes and even the 440 California Highway Patrol cars sounded fierce. Big- and smallblock Corvettes with the mufflers at the very back of the car had a sound of their own, and when equipped with side pipes they really made their presence known. On the other hand, big-block Fords were surprisingly mellow sounding, although the three twos on a 406 made their own special noise at wide open throttle — sort of like a dozen shop vacs sucking through a hose at the same time. For those of us building cars on a kid’s budget back then, cheap glass packs were the mufflers of choice. Some guys chose to install them “backwards” or poured oil down through them so the packing would burn out making the mufflers into echo cans. When the inevitable fix-it ticket for loud pipes was issued, the normal procedure was to yank the mufflers and put window screen over the outlets. The next step was to grab all the scrubbing pads under the kitchen sink when your mother wasn’t looking and stuff them into the mufflers’ inlets. With any luck that quick fix would last long enough to get the ticket signed off before the screen failed and wads of steel wool started blowing out of the pipes. As rodders became more sophisticated sound control became more important, Corvair Turbo mufflers became popular, thanks to reports that they toned down the exhaust note with no horsepower penalty. Soon everyone was using “Turbo” mufflers of some sort but it wasn’t long before true high performance mufflers hit the market. Today, there are all sorts of performance mufflers and exhaust system components (including electrically operated cutouts) that allow us to tune the exhaust note to match our personal preferences. There is no question the sound of a street rod’s exhaust is important, and it’s probably a safe bet that the deep rumble a big V8 makes with modern mufflers will always be popular — it is with me. But then I’ll always have a soft spot for a 6-cylinder with a split manifold — they’re both a big part of street rod life. SRL Not sure of the year, but my pedal car was first on the block with twin pipes.

Distinctive Style

With Modern EFI Manners Sidedraft EFI System

The new Inglese™ Sidedraft EFI System combines distinctive styling with proven FAST™ EFI technology to create an induction that turns heads and provides refined driving manners. Available with the FAST™ EZ-EFI® for engines making up to 650 HP, or with the FAST™ XFI™ for more radical combos, this system is a value-priced alternative to full 8-stack induction since it utilizes your existing single- or dual-plane, 4150 flange, 4-barrel intake. Offered in polished or as cast, the Sidedraft EFI System includes all necessary components such as integrated sensors, fuel rails and linkage.

Distinctive styling with modern EFI Performance

Choose FAST™ EZ-EFI® or XFI™ fuel injection systems

Sensors, fuel rails and linkage included

Fits all 4150 flange, 4-barrel intake manifolds

8-Stack Induction Systems 9575k

Want that 8-stack retro induction look for your engine? Inglese™ has you covered with turnkey EFI induction systems, or we can help you build your own by providing the individual components.

FIGHT UNFAIR AUTOMOTIVE LAWS

FEES. SPAM. CATCH.

ENLIST TODAY: WWW.SEMASAN.COM

EVENT COVERAGE

GRAND NATIONAL ROADSTER SHOW

he Grand National Roadster show is an event that lives up to its name year after year by delivering prestige, history, new trends, and all that is street rodding in one weekend. The 66th consecutive running of the show, which started in Oakland, California, was held January 23–25, at the Los Angeles County Fairplex in Pomona, California, where the buildings and grounds were overrun with rods of all styles, forms, and designs. We’ll help you with the math, it was 1950 when a small group of like-minded hot rodders put their best work on display and vied for the title of America’s Most Beautiful Roadster. This award has continued through the years and still brings in the best of the best in roadster designs and execution. This year, Larry Olson and his ’33 Ford, built by Alloway’s Hot Rod Shop, was awarded the well-earned title. We were able to stroll through the numerous buildings within the Fairplex and take in miles of chrome, polish, and power. Between buildings there were even more cars on display in the southern California climate, which was especially enjoyable for those out-of-towners from the northern states and countries. The GNRS is a spectacular show that showcases the roots of street rods and how it continues to evolve with time. Check out more coverage at StreetRodLife.com and to start planning for 2016, go to rodshows.com. SRL 14

STREET ROD LIFE Vol. 1, No. 1

This ’31 Ford roadster pickup is simply called “Ted’s Red Wagon” after (you guessed it) its owner and builder, Ted Davis. Dig the detailed Donovan Model D aluminum 4-cylinder engine fit with a Pepco blower. The air charge is stuffed through an OHV head with two intake valves and a single exhaust valve. Cool details continue with the use of a Halibrand quick change rearend, 12-inch Lincoln brakes up front, Vertex magneto, and several body modifications.

Moster s ’ a c i r Ame iful Roadst Beaut

The 2015 title of America’s Most Beautiful Roadster went to Larry Olson and his ’33 Ford. The slick roadster was built by Alloway’s Hot Rod Shop and is loaded with subtle modifications that may very well go unnoticed by many. The front end has been stretched and the doors are actually from a sedan to provide a little more room. The list of metal work continues and under the hood is just as impressive, with a worked-over Red Ram Hemi, Stromberg’s, and a stealthy EFI system backed by a 5-speed Tremec. Congratulations to the crew at Alloway’s and to Larry.

Bob Pierson’s ’36 Ford was on the cover of Hot Rod magazine in August of 1948 while it was running Competition Coupe. That’s Volume 1, Issue 8, and now it was sitting in the 66th GNRS show, thanks to its owner Jim Bobowski and the team at South City Rod and Custom in Hayward, California, where the coupe was restored to its record-setting glory on the dry lakes. Jim was awarded the Bruce Meyer Hot Rod Preservation Perpetual Trophy for 2015.

“Psyco” is a fitting name for Mike Gordon’s 1,500-horsepower ’32 Roadster. The 428c.i. engine, assembled by Tom Nelson, huffs through two big turbos to create obscene power. JT Enterprise built the car with credit going to Jason Bryant for the fab and paint work to bring the car to life from a design by Mark Cerquone.

Urban Hirsch’s ’27 Ford features original sheet metal that has been smoothed and modified by Chopit Kustoms, including the hand-formed aluminum nose. The small-block Chevy was detailed and polished to the hilt. The yellow candy paint with contrasting red leather interior by Fat Lucky, just reaches out and grabs your attention.

Ron Berry’s ’65 VW Bus was placed in the Radical Van class and with good reason. This bus was more like a sculpture than an automobile, with radical custom work throughout, including a supercharged Volkswagen in the rear! STREETRODLIFE.COM

For the 5-6-7 crowd, feast your eyes on Dan Duffy’s 210 ’56 Chevy. Dan made the trek from Marietta, Georgia to take part in the show.

Meanwhile in the Gasser class, the ’50 Anglia of Dennis Brown had many people in agreement with the name of the blown sedan.

Smooth and sexy is only a start to describing Chris Jensen’s ’52 Bel Air.

Another amazing original survivor is the Woody Lee T. The car was built in 1949 and entered in the inaugural GNRS, then was raced (with a 296c.i. Merc, Navarro heads and Winfield cam) and shown throughout the late ’60s, where it fell into a long hibernation until being pulled out of storage in 2013.

Kev Elliot built the NotSo Special as a project car in Rod & Custom magazine (RIP) and ran it at El Mirage. With only five runs to its credit, the truck ran a best of 146.389 mph with a stock Ford 2.0L Zetec and Garret turbo. We’re anxious to see what Kevin and the rig have in store for this year.

This ’56 Chevy goes by the handle “Miss Taboo” and has had a little nip and tuck here and there. The old girl has a grille from a ’54 Chevy and bumpers from a ’59 along with the roof scoop from the same Impala. The headlamps are from a ’57 Chrysler, suicide doors, shortened trunk lid, and custom-made trim.

The World’s Wildest Willys was built by the Mura brothers and this very truck won the 1965 America’s Most Beautiful Competition Coupe at the GNRS! The truck is now owned by Kevin and Sheila Doolittle and was restored by Jesse Gonzalez at Street Toys in Juarez, Mexico. Go to StreetRodLife.com for a feature on this mysterious, cool piece of history.

STREET ROD LIFE Vol. 1, No. 1

You’re not seeing double. You’re seeing a Lincoln Zephyr with two grilles. This was a custom build for unknown reasons and the topic of much debate, including added cooling for the V-12 engine or simply aesthetics. Either or, it’s an amazing piece of history and innovation.

We caught Troy Ladd of Hollywood Hot Rods being interviewed about their hand made Mulholland Speedster project that was simply amazing to look over. The curves and details were all presented bare. Mmmm…curves.

Jim Ramirez has a perfect recipe going with a six pack of carbs atop a blower bolted to a Nailhead wedged into a ’36 Ford pickup.

If you’re a fan of the ’40 Ford, the GNRS was the place to be with a collection of tudors, coupes, and pickups to celebrate 75 years of the classic design.

The goal for the Mint T ’27 Roadster that Dawn and Dustin Smith of Spokane, Washington, built was to have a runabout style roadster that could have been built in the early ’40s. A four banger from a ’31 Model A is used for power.

Texans love their pickups and Jason McPike of Spring, Texas, brought his ’47 Hudson out to the GNRS to share with the left coast. Looking to start a new project? Brookville Roadster was on hand to answer questions and fill orders.

Don’t be surprised if you see and hear Randy Manning haul by you in his dual quad big block, transmission wrecking, straight axle ’55. The beautiful wagon sees regular duty on the California highways and stops at the Ontario airport.

Richard Zocchi’s ’57 Ford was in the Radical Hardtop class for good reason. An amazing custom.

For even more pictures from the 2015 Grand National Roadster show head over to StreetRodLife.com

Stuart Roch can haul hot rod parts around all day long in his sweet little ’35 Ford. STREETRODLIFE.COM

with STEVE If you read any car magazines or get out to many events, you’ve probably seen the rides of Pure Vision. Steve Strope is the proprietor, visionary, and man behind the builds that roll out of his Simi Valley, California, shop. This year, Pure Vision is celebrating 20 years of crafting ground-breaking automotive vehicles, while earning some incredible accolades and features, as well as setting some trends through the industry. Steve started building cars as a business after taking his ’66 Charger known as Skully on one of the first Power Tours. People, including staffers at Hot Rod, Mopar Muscle, and others, took note of the unique styling of the Charger and the car ended up being named one of Hot Rod’s top 10 cars of the year. That road trip was the beginning of Steve’s own road map into business. Hot Rod tapped him for a project El Camino with Gumout, then came Challenger X, which was also chosen as a Top Ten of the year in 2001 by Hot Rod (and driven on Power Tour), followed by Dust Ya, a ’71 Duster (another HR top 10 of the year), and a striking red ’72 Plymouth known as the GTX-R. The cars shared a common theme of simplicity, detailed engine compartments, and restraint. Nothing over the top — stylish and smooth, by doing more with less. By the turn of the century, Pure Vision was a name to be reckoned with as builders, fabricators, and designers. The Pure Vision team hasn’t slowed down. In fact, at the 2015 Grand National Roadster Show they were awarded the Best Street Machine of the Show for their amazing Black Ops ’67 Ford Fairlane. We were able to corner Steve to pick his brain about getting started in this business and what he thinks about the hot rod industry.

When did you know that designing and building cars was what you wanted to do for a living?

I never planned on doing this, but I’ve always been and will always be a car guy. My first goal was music and I did the recording, the touring, the playing for a few years, but when you’re in a band you have to rely on other people and their visions. That’s tough. I finally ended up going for a job in the hot rod world, packed up all of my belongings, and made the move from upstate New York to California. Problem is, when I got to California, the place I worked for closed their doors in just a couple months, leaving me with nearly nothing. Eventually I built a ’66 Charger, did some groundwork by marketing it to the magazines with a rendering and the goal of taking it on the Power Tour (this is in ’96 or ’97). Hot Rod ran the rendering, we took the car, it was a hit on the trip, and made the cover of Mopar Muscle plus it was one of Hot Rod’s top 10 cars of the year. That Power Tour was key as I met a lot of people on that trip that helped get me started. 18

STREET ROD LIFE Vol. 1, No. 1

The next thing I knew, I was building an El Camino for a Hot Rod project giveaway car and that’s when things started rolling.

Do you have any mentors or main influences that sent you down this career path? I’d have to say that my main influence is Scott Sullivan. He is the man. No one can make a car sit and look right like Scott can. Just look at his Cheeze Whiz ’55 Chevy. It’s just a big ball of taste. The way he approaches a car is just right. He pays attention to what he wants you to see and what he doesn’t want you to see. All of his cars are just right.

What do you think about the influx of car-building shows that are on these days?

As a business owner and builder, I don’t see much TV. However, what shows I have seen, several are passable. The rest seem scripted, fake, and phony. That said, I understand why they’re like that and why they’re on. I liked the show Rides when it was on years ago and how the show documented the entire build of a car. That was cool, which is why I agreed to

STROPE

film with them in the build of Hammer, a ’70 Road Runner.

What advice would you give a young designer or builder today?

To be successful at any job demands a lot of work and sacrifice. In the car world, you need to master two sides: You need to be an artist for the car, and you need to be a businessman for the company. It’s a never-ending battle on managing time and money with a build. Unless you have a partner that keeps up with the business side of things, be ready to wear a lot of hats other than just the builder. When I was shooting for success in the music business, my dad made me

take business management courses in college, which was a good thing to do. I highly recommend anyone learn the management side of things. It will help immensely with accounting, employees, shop insurance, and more. Another important aspect, and yet another hat to wear, is marketing yourself and the cars. Get professional renderings made with details about the build for the media — and follow through.

Do you have a favorite car that you’ve built — and a favorite one that you haven’t built yet? It would be hard to name a favorite build, how can you choose? It would be like saying which of your kids is your favorite. As for cars that I haven’t built yet, I have two in my head that I really want to build. They’re two “what ifs” and one is a bookend to the Martini Mustang. The other, you’ll just have to wait and see.

We haven’t seen your latest cars embracing modern engine architecture (the Fairlane, Martini, TT Camaro, 515 GTB all had vintage or traditional engines). What gives? When I design a car, each one has a theoretical back story. There’s a reason for every piece and part on these cars and newer engines just don’t fit the bill. Take the Martini Mustang for example: The back story is that Ford had recently had success at Indy and

during the Tour de France in the mid-’60s. What if some big-wigs at Ford wanted to get some endurance testing done with their new 4-cam Indy engine? We put together a vehicle designed with our vision of what Shelby and Ford may have developed as a race/development car to run across Europe. Would a Coyote or Mod Motor work with this vision? No. Look at the ’67 Fairlane as well. The concept is a covert R&D vehicle from ’67. It just had to be an SOHC engine. The engine MUST go with the theme of the car. Old engines are cool and have a heritage that is lasting.

Do you have any favorite builders these days? Who and why?

Dave Lane of FastLane Rod Shop is bad ass. That ’34 he did for Poteet is just how to do it. The execution, the restraint, and the Nailhead for the engine choice is just right on. That car is just a sweetheart.

Building a complete car for a customer can be a fairly personal experience. How do you go about coming up with a theme or design for a customer?

It depends entirely on the customer. I’ve gone through both directions. The Mustang I had planned in my head and explained it to a few guys, and out of the blue someone called and said let’s build it.

The other way is when a customer comes in with a car and knows the combination they want, then we work it from there. For the Fairlane, the owner wanted that car and an SOHC engine. We didn’t want to do another AFX car, and after sleepless nights the concept of the hidden R&D car just struck me.

Does anything surprise you in the world of street rods and muscle cars anymore?

There are certainly still things that raise my eyebrows in our industry, but mostly it has to do with the details and amazing fab work that go into a build more so than the complete car. I prefer restraint and knowing when to say when over some of the more overthe-top builds and details you see on some cars. I understand the place for it, but when I see subtle done right, it’s just right. One thing that is very important to me is to build cars that cannot be dated. I like to think than when you look at the Martini Mustang in 15 years, someone would have to guess at what year it was built. I don’t want them to be dated by the styles and popular looks of the day. That is very important.

If you could build a car for yourself, no holds barred or budget, what would it be and how would it be built? It’s in my head, but you’re going to have to wait for it. I’ll give you a hint, it’s a Buick and it’ll be built someday. SRL

purevisiondesign.com

101

FASTENERS Quick guide to choosing fasteners

ithout a variety of bolts, nuts, washers, and screws, we would all just have a big pile of parts lying on the floor of the garage. It’s the fasteners that hold all of these chunks of metal together that allow us to build, play, and drive our street rods. With that in mind, it is crucial to select the correct fastener for each application, from head bolts to wheel studs, and each one must be properly installed. To learn more about retainers, we turned to the experts at Automotive Racing Products, Inc. (ARP), for their input. ARP have been manufacturing high performance fasteners for nearly 50 years, and have a strong working relationship with leading car builders, race teams, and engine builders the world over. When you select a bolt, there are at least a dozen parameters that come into play: material, strength, pitch, number of threads per inch, grip diameter, thread diameter, underhead grip, thread 20

STREET ROD LIFE Vol. 1, No. 1

lengths, head design, wrenching size, head height, and collar diameter. The strength of a bolt obviously plays an important role in the selection process, as the stronger the bolt the more clamping force can be achieved. Most ordinary bolts are made of lowor medium-grade carbon alloy steel that’s been tempered to varying degrees. These are identified by markings on the head; plain indicates SAE Grade 1 or 2 (nominally rated at 60,000 psi tensile strength), three marks are used for SAE Grade 5 (120,000 psi), and six hash marks represent SAE Grade 8 (150,000 psi). ARP’s polished stainless steel or black oxide finished 8740 chrome moly accessory bolts are both nominally rated at 170,000 psi — substantially stronger than Grade 8. The added benefit of the stainless steel (which is a proprietary alloy) is that it won’t chip, peel, or rust as is often the case with ordinary steel bolts (especially chrome plated ones).

Most bolts are identified by markings on their head. Grade 8 is the strongest and has six hash marks, Grade 5 has three marks, and Grade 1 or 2 have none. Be sure to use a proper grade bolt when it comes to important suspension, brakes, safety harnesses, and of course the driveline.

SAE-2

From there, ARP offers bolts made of heat-treated 8740 chrome moly and more exotic alloys. These are nominally rated from 200,000 to 280,000 psi, depending upon the material, heat treatment, and application. These are the retainers that are typically used for the hardcore areas of an engine such as attaching cylinder heads, main caps, and connecting rods. For most automotive applications lock washers should not be used. Flat washers should be employed to prevent the bolt from “digging” into the item being secured, especially if it’s aluminum, and provide a known friction value for applying proper torque. Split washers are counterproductive and should be avoided when any degree of preload is being applied. It’s important to note that a fastener acts similar to a spring, as it must be stretched in order to exert tension. That is why you may hear of using a stretch gauge in certain extreme applications today. A bolt will stretch, which generates a certaing clamping load, and if you go beyond its limit, that load — and the bolt — will be compromised. As an example, a typical small-block Chevy rod bolt made of 8740 chromoly

APR offers six different sizes of stainless steel bolts ranging from a sturdy 1/2-inch diameter down to 10-32 sizes in a number of lengths.

SAE-5

SAE-8

must be stretched about .006 inches to achieve a 10,000-pound preload. When it comes to a bolt’s head there are pros and cons for both standard hex and 12-point designs. As a rule, 12-point heads, especially “reduced wrenching” models, are better suited for use in tight quarters. There is also the fact that torqueing force can be applied more efficiently with a 12-point. The primary consideration centers on what tools can be employed to apply the torque. A popular rule of thumb is “If you can’t get a socket wrench on it, use a hex.” This is especially true in tight quarters where limited vertical clearance prevents slipping a box end wrench over the head. There are numerous applications where studs can be used in lieu of bolts as well, such as the attachment of cylinder heads, main caps, headers, oil pans, valve covers, and the like. There are obviously pros and cons for both. For the most part, ARP’s tech reps recommend studs. One important reason is that studs are “easier” on threads, especially on aluminum, than bolts. Another is that studs serve to precisely guide and locate gaskets and components, making the assembly process that much quicker.

1. Underhead length 2. Thread length 3. Grip length 4. Thread diameter 5. Grip diameter 6. Wrenching (size wrench to use) 7. Head height 8. Collar diameter

ARP catalogs what is clearly the world’s largest selection of high performance fasteners in three basic formats: by engine, by application, and by size. To make it easy to dress up most any engine, ARP serves up an Engine & Accessory Fastener Kit that covers a dozen different functions (valve covers, oil pan, intake manifold, front cover, etc.) It’s amazing what a difference a set of good looking fasteners will do to your engine detailing, and they have them in a variety of coatings and styles of heads. If you’re working on some oddball engine application and can’t find a kit for it. ARP offers a wide listing of bolts in handy 5-packs by size. These range from hefty 1/2-inch diameter bolts that come in lengths up to 6-inches, down to a series of newly-introduced 10-32 stainless steel 12-point bolts that fit a variety of applications (from Edelbrock carb bowls to brake and fuel line clamps). It’s important to be mindful of properly torqueing each fastener, as the desired clamping force can only be achieved when sufficient preload is applied. Since all fasteners are subject to “preload scatter” (varying preloads caused by friction in the threads or lubricant), ARP developed Ultra-Torque — an ultra-consistent fastener lubricant that assures getting within 95–100 percent of the desired preload on the first (and any subsequent) pull of the torque wrench. It’s also important to have your torque wrench checked for accuracy. The bottom line, of course, is that selecting the right fastener for the right job, followed by accurate installation is key to long-term engine and component reliability. SRL Source: ARP, arp-bolts.com

STREETRODLIFE.COM

A 1940 Chevy that honors the

GREATEST GENERATION 22

STREET ROD LIFE Vol. 1, No. 1

Words/Photos Louis Kimery

hen an automotive engineer takes on a personal street rod project, you might expect some interesting details to emerge from the build, but John Callies’ Che’Pon takes detail to a whole new level. John has been involved with automobiles his entire life. His penchant for engineering and fabrication began at an early age when he started visiting the vocational school where his father taught future tradesmen. Soon after, a 7-year-old John wanted his own welding set. His father suggested he find a job first, so the budding craftsman became a paperboy. Before long, John was welding with his newly-acquired Victor welding kit, and has never looked back. A series of homebuilt hot rods coincided with a formal college education as an automotive engineer. John’s personal automotive projects have always been a bit different from the mainstream. For example, there was the ’48 Anglia that competed at the drags as a C/gasser and doubled as his daily driver. He drove that Anglia to a new job in Illinois, and Chicago’s street racing scene was forever altered. Later, after relocating to Los Angeles, he found a tiny 1937 Simca and converted it into a pocket road racer powered by a Pontiac 303c.i. Trans Am engine. Brutally fast with V8 power and an 80-inch wheelbase, the southern California sports car set is still trying to figure what hit them forty years later. John has an affinity for Pontiac motivation, which comes naturally after a 21year career with the Pontiac Motor Division of General Motors. During this

time, John served as the director of Pontiac Motorsports for 10 of those years. He worked closely with many of American auto racing’s brightest stars. Racing legends like Richard Petty, Dale Earnhardt, and Rusty Wallace brought victory to Pontiac on the NASCAR circuit, while Don Prudhomme and Butch Leal dominated the NHRA racing Pontiacs. Pontiac support also helped IMSA racers find their way to the winner’s circle with Fiero GTU/GTP race cars. When the Fiero was selected to serve as the pace car for the 1984 Indy 500, John was the development engineer, and was chosen to lead the pack at the Brickyard as its driver. When John left Pontiac, he began an engineering odyssey that brought his skills to some of the best-known names in the performance business. From his own crankshaft company,

to Lunati Cams and Morel Lifters, John is still embedded as a key player in the performance industry today. When John initially acquired the white 1940 Chevrolet Deluxe coupe — that would later become Che’Pon — it was intended to be a fun cruiser for he and his wife Rose, but then he decided to make a few improvements. Nine years and 8,000 hours of labor later, we can now see what all the effort brought, and how an engineer brings his ideas to fruition. The first thing to notice is the unusual name, coined by Rose, which is an amalgamation of Chevrolet (Che) and Pontiac (Pon). This particular Chevrolet coupe has received numerous modifications, and is now powered by an all-aluminum Pontiac race motor assembled from some of the treasures of John’s long association with the brand. So now you know you know why it’s a Che’Pon. The aviation-inspired theme of the car gives a nod to the venerable P-51 Mustang, and is intended as a tribute to America’s WWII veterans and the United States Army Air Corps.

The aluminum paneling, the bomber jacket leather seat upholstery, the noseart airbrushing and USAAC insignias, all contribute to the respectful salute that John is making to America’s Greatest Generation with his hot rod. Even an F-105 Thunderchief rear-view mirror made it’s way into the interior. The motor is one of the highlights of the car, and consists of a Keith Black aluminum block fitted with a set of aluminum cylinder heads that John spearheaded the development of during his tenure at Pontiac. These heads were originally intended for Pro Stock drag racing, and feature

Dale Eicke porting technology and specialized valvetrain components. The rotating assembly includes a Callies crank and rods, with a set of Wiseco 10:1 pistons. A COMP Cams bumpstick regulates valve action, and an MSD ignition (with a FAST controller) keeps the fire lit in each cylinder. The one-off fuel injection intake manifold is a Pontiac-Kinsler collaboration from the IMSA GTP program. The dry sump oiling system and handmade headers, coated with Caps Brite Hot, were all fabbed by John in his well-equipped home shop. The net result is a 557c.i. monstrosity with a 4.25-inch stroke and a 4.56-inch bore. An honest 750 horsepower is ready at 6200 rpm, with an additional 300 horses available via the trunk mounted nitrous oxide system. The visual impact of the big V8 is further aug-

mented by a beautiful set of CNC-machined valve covers that feature a Cloisonné emblem of the famed Pontiac Indian Chief on each cover. The transmission is a G-Force 6-speed coupled to the engine with a dual-disc Quarter Master clutch. The power is sent to a hand fabricated rear-end housing with Mark Williams axles. A Mark Williams-forged, 9-inch third member is equipped with an Eaton Tru-Trac, and a Richmond 4.77 ring and pinion. The chassis is another work of art that demands close inspection. Hand fabricated 4-inch boxed tubing with a 4-link rear suspension and Watts link, along with a custom front suspension of John’s own design, keeps Che’Pon pointed in the right direcSTREETRODLIFE.COM

tion and all that power firmly planted on the tarmac. Of particular note is the full 12-point roll cage that is fully integrated into the body and provides 120,000 pounds of torsional stiffness per degree of twist, as well as a substantial safety enhancement. Colorado Custom whittled up a Che’Pon-specific set of aluminum wheels with special offset to accommodate the tires within the widened rear fenders, which were widened by 1.5-inches, and another 1.5-inches were gained with a modest wheel tub. Further body modifications are plenty but require a second look to fully grasp. The rear fender openings are contoured for the lower profile tires, and new widened aluminum running boards were fabricated to bring the rear fenders to the front in an aesthetically pleasing manner. The entire front end tilts forward to reveal the big Poncho engine. All of the original steel body panels were used, making it appear as it did from the factory, but a tubular skeleton and 27 aluminum panels complete the front end from the inside. It fits like a glove, and its release is actuated by a pair of Honda 125 motorcycle struts, which makes for a very precision tilting mechanism. Newly-fashioned bullnose trim was diligently crafted for the tilt front. New stainless trim, hood grills, and custom Cloisonné emblems are installed throughout the car. Aluminum bumpers are used front and rear. One-piece door glass was used.

STREET ROD LIFE Vol. 1, No. 1

Electronic innovations are abundant on Che’Pon. An LCD video display panel is mounted in the trunk. A FAST EFI computer regulates the fuel injection system and traction control, while a second custom-built computer provides information and entertainment through the sound system and interior display. The car is a rolling Wi-Fi hub, and a full complement of LCD lighting is used inside and out.

A full brace of Classic Instruments gauges are installed in the original dash. A roof-mounted console provides controls for many of the cars specialized functions, while the NOS system and line-lock are both actuated through the hand fabricated aircraft style steering wheel. The Che’Pon made its public debut this past November at the 2014 SEMA show in Las Vegas.

John has been busy shaking down the new setup and intends to participate in several events throughout the coming year. “Every car I’ve ever owned gets driven,” Callies says. “The intent with this car is to be able to go to the drags, an autocross, or drive it across the country.” Keep your radar trained on this brilliant blue hot rod, and be prepared to spend considerable time examining its many details. SRL

STREETRODLIFE.COM

SPARK

Follow that

Technology has changed, but the premise still remains, a street rod needs a good spark Words Brandon Flannery/Photo Jason Graham

f there is one area of a street rod that remains shrouded in mystery for many owners, it’s the ignition system. “For some reason when ignition problems arise, even the most confident of builders get scared and run,” says Terry Johnson, Product Manager at Crane Cams. “Something goes wrong and out comes that deer in the headlights look.” Crane Cams followed their camshaft success with a series of industry breakthroughs, starting with the first digital aftermarket ignition in 1995. Consecutive innovations include the first drop-in digital points replacement, the first adjustable distributor with 27 advance curves, and they were the first to use fiber optic trigger signals. In short, they know a thing or two about lighting a spark plug, and Johnson was just the brain to pick for answers to our questions. However, regardless of how far technology has come, the basic principle of creating enough electricity to initiate combustion and push down a piston remains the same.

The Early Days

Though conceived in the mid-1600’s, forays into developing the internal combustion engine really began to rev up in the mid-to-late 1800s with the onset of electricity. Harnessing this powerful new technology was exciting, and soon found its way into the hands of those experimenting with methods of propulsion. Igniting a mixture inside a piston bore proved effective, and the need for a longer and hotter spark at the time of ignition was quickly realized. 28

STREET ROD LIFE Vol. 1, No. 1

Identifying a need in the absence of an established technology, the solution was very straightforward and came in the form of a magneto. A spinning magnet inside a tightly-wound coil of wires produces a current inside the wires that builds up within a circuit, and then escapes (or discharges) when that circuit is broken. This current was found to arc across a gap, causing a spark that lasted until the charge was depleted enough to not be able to power across that gap. Think of it as built-up water bursting across an open gap in a pipe. This happens very quickly, and the need for a longer spark duration led to a method of holding or reserving more electricity to send across the gap. Thus, the mysterious capacitor, or condenser, was born. We’ll get to that in a bit.

Revolution of the Distributor

While magnetos provided a solution, they had a few shortcomings. Foremost, they needed to turn to create energy, so starting was a problem. Magnetos were the earliest forms of ignition systems. They create their own spark energy by spinning a magnet inside a coil of wiring, but are dependent upon engine rpm to operate, so starting is a problem.

Capacitor basics Capacitors store a reserve of energy to release when the points contact breaks. This reserve of energy is included in the collapse of the magnetic field and increases the duration of the spark across the plug gap. It stores energy in a resonating cycle, similar to a tuning fork. Energy is stored in the capacitor’s electric field. This energy charges the field of coiled wires as current flows through the inductor portion of the circuit, creating magnetic energy. The electric current reaches the capacitor plates, which breaks the field. This reverses the polarity (and basically

direction), returning it back through the magnetic coil field, inducing magnetic energy again, until it reaches the other plate. At the other plate, the energy goes through the same process — reversing polarity, and traveling back towards the first plate. This happens again and again, tens of thousands to billions of times per second and stores enough energy to increase the spark duration Electrical once the points are broken. energy You can see that discharginduces ing a capacitor carries a risk magnetic of shock, and they should be energy handled carefully.

Model T ignitions solved this by using dry cells and an electric buzzer to provide enough electricity to start the engine and get the magneto up to a productive speed. Spark timing was delivered through a “timer” on the front of the engine, and was manually adjusted with a lever on the steering wheel. Timing was retarded for lower compression to aid in starting and then advanced for optimum performance. With the advent of car batteries, magnetos were replaced with systems that borrowed low-voltage energy from the battery and increased it enough for a usable spark through a transformer. This would be the coil. Inside the coil, two layers of wiring are wound around an iron core. The first layer magnetizes with battery current until it gathers enough energy for a spark and then a contact breaker opens. This breaks the circuit and the magnetic field collapses. The severe rate of discharge causes a change in the magnetic field of the iron core, inducing, or creating a higher voltage in the second layer of wiring. Now, prior to the contact breaker opening, some of that extra current gathering in the first layer was diverted into a capacitor. The capacitor and the second layer form a tuned circuit that can hold energy like a reservoir. This stored energy, from the breaker-induced collapse, oscillates back and forth in the circuit, inducing, or creating a much higher voltage. Now we have enough spark to fire the plug, a required range around 20,000 to 50,000 volts. (See the sidebar for a closer look at how a capacitor works, they’re pretty interesting, and you will finally understand why they can shock you. Literally.) For the record the first reliable system of this kind was developed by Charles Kettering of the Dayton Engineering Laboratories Co. (Delco) and debuted in the 1910 Cadillacs. With enough spark built up, the evolution of the contact breaker, or the points, and the means to get that spark to the right cylinder at the right time quickly followed.

Electrical Energy Field

Energy reverses polarity at the capacitor plates

HEI fans can upgrade their entire distributor with Crane’s new Performance HEI unit that drops right in. Features include a high performance coil, positive stop fly weights for accuracy, and a vacuum canister advance system that can be adjusted and limited. They’ve also taken great effort to minimize end play.

Distributors were refined, incorporating the ability to adjust the moment of spark automatically depending on conditions. One of the two methods of achieving this goal is mechanical advance, which uses centrifugal force to move weights on a spring to pull (or rotate) the points plate around the spinning distributor shaft thereby advancing the ignition timing. The second method used to alter the ignition timing was a vacuum signal from the manifold and a diaphragm to pull or rotate the points plate. Both were dependent upon operating conditions and had their unique weaknesses. Though these systems lasted well into the 1970s, they required maintenance, as voltage quality was dependent upon the effectiveness of the precise operation of the breaker points. Understandably under a lot of stress, contact points were subject to oxidization from the spark and mechanical wear of the nylon cam follower that slowly decreased the spark gap. Pontiac’s Delcotronic system made the leap to a breakerless Electronic Ignition in 1968, using a Hall Effect sensor that responded to rotating magnets on the distributor. Within a few years, electronic distributors were available as standard equipment in all domestic vehicles. Within another 10–15 years, distributors were replaced by crank angle sensors and coil packs.

The Modern World

Today’s modern engines are distributor-free and are controlled by an electronic Engine Management System that orchestrates fuel delivery and timing control through a number of sensors and information. These sophisticated systems can now account for a number of different factors or situations, and even tailor independent timing moments for individual cylinders. STREETRODLIFE.COM

of guys think they “Acanlotbuild a car, install

Spark plug wires are a common point of failure for ignition systems. High quality wires like Crane’s 8.0mm FireWire series use a reactive core rather than a suppression core and double silicone layers to transmit up to 50 percent more energy. More energy equals better spark and more power.

Crane was the first to bring a more accurate electronic replacement for traditional points systems. Their XR-i electronic conversion installs easily with only two wires and keeps an OE appearance. An adjustable rev limiter is a bonus.

For all-out ignition performance, Crane’s HI-6S ignition and coil kits deliver up to 70-percent more spark energy than stock systems and feature a built-in rev limiter that drops cylinders in a sequential order to prevent fuel loading.

STREET ROD LIFE Vol. 1, No. 1

the ignition system, and then walk away. That’s not the case.

”

A collection of sensors gather data which is then processed for the most optimum spark moment, greatly increasing fuel efficiency and performance. Calculating the ideal timing required is half the equation, but a high voltage is still required to ignite the fuel mixture in the combustion chamber and coils are still the source of the spark. Today’s coils are much smaller and remotely mounted, and many systems use one coil per cylinder. Innovation and the quest for efficiency has even eliminated the ubiquitous spark plug wires with the development of Coil-On Plug technology. It’s now a straight shot from the coil to the plug. These modern systems are increasingly found on engines used in street rods. Many of these modern engines serve as a base to be hopped up for more horsepower, bigger displacements, better intake systems, superchargers, turbos, and even nitrous. More fuel needs more spark and better control. As high tech as these systems have become, the aftermarket has quickly responded with bigger and better solutions. Additionally, as evolved as they are, they still require some timeless attention. “A lot of guys think they can build a car, install the ignition system, and then walk away,” says Johnson. “That’s not the case. While the life cycles have expanded with better technology, they still degrade. Plug wires in particular, still fatigue, sometimes with very little visual clues. “Like any system, if the parts are not optimized and dialed in to work in unison, it doesn’t matter if you throw money at it or not, it’s simply not going to perform well. Even something as simple as periodically checking the battery and chassis grounds — those are easy to overlook — can grossly affect the integrity of the electrical system.” So, as we head off into the unknown future of wireless tuning from iPhones and touchpad systems, street rodders can utilize some of these advanced technologies in their own cars. Modern crate engine swaps can benefit from upgraded aftermarket components like higher quality coils and high performance spark plug wires, such as Crane’s FireWire series for LS applications. Older cars can run a little stronger thanks to Crane’s new rane’s new XR-i digital points replacement which also has a built-in rev limiter. Crane’s vastly improved HEI distributors are made to exacting specifications that eliminate inaccuracies in advance-weight bounce and shaft end play. Street rodders can also benefit from standalone inductive ignitions that offer great low- to mid-range performance, rev limiters, and hotter spark ranges. Some ignitions even offer in-car adjustability, allowing the driver to retard the timing during starting in high performance applications, and advance under operating conditions. After all this time, the feature found on the Model T has come full circle, only this time, out of preference and not necessity. SRL Source: Crane Cams, cranecams.com

HARBOR FREIGHT QUALITY TOOLS AT RIDICULOUSLY LOW PRICES

How Does Harbor Freight Sell GREAT QUALITY Tools at the LOWEST Prices?

SUPER COUPON

FREE 20% OFF 14

We have invested millions of dollars in our own state-of-the-art quality test labs and millions more in our factories, so our tools will go toe-to-toe with the top professional brands. And we can sell them for a fraction of the price because we cut out the middle man and pass the savings on to you. It’s just that simple! Come visit one of our 550 Stores Nationwide. R ! PE ON SU UP CO

WITH ANY PURCHASE

7 FUNCTION DIGITAL MULTIMETER

ITEM 90899/98025/69096

! WPOOWDWER-FRSUEEPENITR CORILUPE GLON OVES OF 100 SAVE

• 5 mil. thickness

LOT NO. 69684 61776/61969/61970 Item 69684 shown

YOUR CHOICE!

134

$649

REG. PRICE $299.99

UPON! WOW SUPER CO P FLUX AM 90 RE WELDER $

• No Gas Required

R ! PE ON SU UP CO

LOT NO. 68887 61849

WE CARRY A FULL LINE OF WELDING WIRE

SAVE $90

Item 68887 shown

$9999 $

109

REG. PRICE $149.99

t be used with other discoun s last. calling 800-423-2567. Cannot or HarborFreight.com or bypurchase with original receipt. Offer good while supplie er per day. LIMIT 5 - Good at our stores es after 30 days from original Limit one coupon per custom or coupon or prior purchascoupon must be presented. Valid through 7/2/15. l Non-transferable. Origina

SAVE 62% Requires three AAA batteries (included).

SAVE $ $70

X-LARGE

LOT NO. 68498/61359

Item 61253 shown

Item 67227 shown

185

64 $116

REG. $ 99 PRICE

$ SAVE $50

LOT NO. 67287 61917/62234

5999

Item 61917 REG. PRICE $109.99 shown

LIMIT 3 - Good at our stores or HarborFreight.com or by calling 800-423-2567. Cannot be used with other discount or coupon or prior purchases after 30 days from original purchase with original receipt. Offer good while supplies last. Non-transferable. Original coupon must be presented. Valid through 7/2/15. Limit one coupon per customer per day.

12,000 LB. ELECTRIC WINCH WITH REMOTE CONTROL AND AUTOMATIC BRAKE

R ! PE ON SU UP CO

LOT NO. 68142/61256 60813/61889

SAVE $300

• Weighs 77 lbs.

30", 5 DRAWER TOOL CART

Item 68142 shown

29999

$7.99

18999

SAVE 37%

SAVE 61%

14999

REG. PRICE $219.99

HIGH SPEED METAL SAW LOT NO. 91753/60568/62541/113 Item 91753 shown

REG. PRICE $33.99 LIMIT 6 - Good at our stores or HarborFreight.com or by calling 800-423-2567. Cannot be used with other discount or coupon or prior purchases after 30 days from original purchase with original receipt. Offer good while supplies last. Non-transferable. Original coupon must be presented. Valid through 7/2/15. Limit one coupon per customer per day.

• 100% Satisfaction Guaranteed • Over 25 Million Satisfied Customers

Item 32916 shown

LOT NO. 32916 69886/69520

4999

REG. PRICE $79.99

R ! PE ON SU UP CO

1000 LB. CAPACITY ENGINE STAND

R ! PE ON SU UP CO

LOT NO. 95272 • 704 lb. Capacity 69397 61427 Item 95272 REG. PRICE shown $349.99

LOT NO. 67847 61454/61693

hft_streetrodlife_spring2015_M-REG56855.indd 1

• 1250 lb. Capacity

LIMIT 5 - Good at our stores or HarborFreight.com or by calling 800-423-2567. Cannot be used with other discount or coupon or prior purchases after 30 days from original purchase with original receipt. Offer good while supplies last. Non-transferable. Original coupon must be presented. Valid through 7/2/15. Limit one coupon per customer per day.

VEHICLE POSITIONING WHEEL DOLLY

R ! PE ON SU UP CO

LOT NO. 68049 62326/61253/61282

WOW SUPER COUPON!

SAVE

2.5 HP, 21 GALLON 125 PSI VERTICAL AIR COMPRESSOR Item 67847 shown

LOT NO. 68497/61360

REG. PRICE $11.99

RAPID PUMP® 3 TON LOW PROFILE HEAVY DUTY STEEL FLOOR JACK 20" REG. PRICE $169.99

VALUE

LIMIT 1 - Cannot be used with other discount, coupon or prior purchase. Coupon good at our stores, HarborFreight.com or by calling 800-423-2567. Offer good while supplies last. Shipping & Handling charges may apply if not picked up in-store. Non-transferable. Original coupon must be presented. Valid through 7/2/15. Limit one FREE GIFT coupon per customer per day.

LARGE

$ 99

REG. PRICE $599.99

LOT NO. 67227 69567/60566/62532

MEDIUM

Item 90899 shown

Item LOT NO. 68498 6/61363 shown 6849

LIMIT 4 - Good at our stores or HarborFreight.com or by calling 800-423-2567. Cannot be used with other discount or coupon or prior purchases after 30 days from original purchase with original receipt. Offer good while supplies last. Non-transferable. Original coupon must be presented. Valid through 7/2/15. Limit one coupon per customer per day.

LIMIT 7 - Good at our stores or HarborFreight.com or by calling 800-423-2567. Cannot be used with other discount or coupon or prior purchases after 30 days from original purchase with original receipt. Offer good while supplies last. Non-transferable. Original coupon must be presented. Valid through 7/2/15. Limit one coupon per customer per day.

R ! PE ON SU UP CO

27 LED PORTABLE WORKLIGHT/FLASHLIGHT

R ! PE ON SU UP CO

PACK

45%

t be used with other discoun s last. calling 800-423-2567. Cannot or HarborFreight.com or bypurchase with original receipt. Offer good while supplie er per day. LIMIT 7 - Good at our stores es after 30 days from original Limit one coupon per custom or coupon or prior purchascoupon must be presented. Valid through 7/2/15. Non-transferable. Original

SAVE

ANY SINGLE ITEM

LIMIT 1 - Save 20% on any one item purchased at our stores or HarborFreight.com or by calling 800-423-2567. *Cannot be used with other discount, coupon, gift cards, Inside Track Club membership, extended service plans or on any of the following: compressors, generators, tool storage or carts, welders, floor jacks, Towable Ride-On Trencher, Saw Mill (Item 61712/62366/67138), Predator Gas Power Items, open box items, in-store event or parking lot sale items. Not valid on prior purchases after 30 days from original purchase date with original receipt. Non-transferable. Original coupon must be presented. Valid through 7/2/15. Limit one coupon per customer per day.

12" SLIDING COMPOUND DOUBLE-BEVEL MITER SAW WITH LASER GUIDE

SAVE $165 $

SUPER COUPON

• No Hassle Return Policy • Lifetime Warranty On All Hand Tools

SAVE $

OVER

208

SUPER COUPON! OPEW W WATTS 4000 AK/3200 RUNNING SUPERT QUIE

6.5 HP (212 CC) NERATORS GAS GE 69676/6972968528

LOT NO. LOT NO. 69675/69728 CALIFORNIA ONLY

Item e 69676 • 70 dB Nois shown Level

$29178 $33999

REG. PRICE $499.99

• 550 Stores Nationwide • HarborFreight.com 800-423-2567

1/30/15 10:11 AM

EVENT PREVIEW

GOODGUYS 2015 Season

s winter winds down across the Midwest, street rodders are chomping at the bit to roll up the garage door, dust off their ride and pull it out into the warming sun. Meanwhile in the south and western regions, races including NASCAR and NHRA, and car shows are kicking off their 2015 seasons. For lucky street rodders in the southwest and west coast, the Goodguys Rod and Custom Association is preparing for another year of hot rod fun. Goodguys launches its 32nd season with the Spring Nationals on March 13–15 in Scottsdale, Arizona — the same place where they wrapped up their 2014 season in mid-November. The two Arizona events bookend the upcoming 21 stops across the USA and includes a number of different road trips and tours. The first three events all take place in March with stops in Ft. Worth, Texas, from March 20–22, and in Pleasanton, California, the home town headquarters for Goodguys, on March 28–29. Thirteen events welcome cars and trucks of ’72 and older vintage, while eight shows have an added All-American Sunday, which accept all years and makes of American made or powered cars and trucks. The 2015 schedule expands with an all new show in Raleigh, North Carolina, from April 17–19, and a return to Beech Bend Raceway in Bowling Green, Kentucky, on September 18–20 for an event that will include Vintage Drag Racing. If you’re not a vintage racer, don’t worry, because Goodguys also hosts an autocross track at 17 of its events and is open to any show participant, so you have no excuses not to give it a try. 32

STREET ROD LIFE Vol. 1, No. 1

We’ve been to a number of Goodguys events — including the 2014 season finale in Scottsdale — and thought we’d give you a taste of what the season kickoff event will look like with a few shots from that huge show. We’ll also have coverage and news from a number of Goodguys events this year, but you should definitely make plans to get out to a show in your region. Check out their entire 2015 schedule at good-guys.com. SRL

Who doesn’t like a casual walk through the swap meet on Saturday morning…only to go back later in the day to see if the prices have dropped on that intake setup or headers that you were eyeballing for the next project? Goodguys always has a swap meet to buy, sell, or simply window shop.

We thought this wild custom ’40 Ford pickup barn find was a pretty cool piece of history. The custom tilt front end, tri-power Nailhead, and crazy dash were all built in the mid ’60s. Asking price was $10,000, but it was still there on Sunday afternoon. What would you pay?

This ’51 Mercury sled has it all: chopped, smoothed, stretched, lake pipes, whites, and huge chrome up front. Owner Howard Blackburn of Peoria, Arizona, used a 440 power plant backed with a 727 trans to heave the screaming yellow mass down the road.

Tim Benedict’s ’49 Ford is highly-detailed and wrapped in silver splendor. A nice surprise under the hood is a clean 354 Hemi.

STREETRODLIFE.COM

Kaiser Darrin

When was the last time you saw a Kaiser Darrin at a car show? Better yet, what is a Kaiser Darrin? There were less than 450 produced between 1953 and ’54. Many consider this the first production fiberglass car in the U.S. — though we’re sure there’s a debate amongst Corvette aficionados. Notice anything else unique to these rare cars? How about the bizarre and quite efficient pocket doors? Another one-and-only. The two Darrin’s that were on display in Scottsdale were very cool to see, since one was a complete restoration, while the other one was a vintage drag car. The owner, Lee Abrahams, originally bought the yellow Kaiser in the early ’60s and built it into a serious drag machine. Eventually he moved to Tucson, Arizona, and later sold the Kaiser. Fast forward to 2007, when Lee found the car and built it back to its former racing glory, including the injected big block and sky-high stance. It’s rare to even see a Kaiser Darrin and was quite a treat to see a vintage race version sitting alongside a restored version.

Local Scottsdale rodder Jack Keldenich’s ’37 Ford sedan was built for the road with a smallblock Chevy and overdrive trans. The top has been chopped, louvers punched in the hood, and body-matched steel wheel treatment give it a classic hot rod stance.

Connie Wash of Gilbert, Arizona, had this ’52 Buick sitting just right, along with subtle striping on a satin body with a metallic hue on the big roof to add a little contrast to the unmistakable Buick chrome. Where else are you going to see two ’40 Chevy convertibles? Ted and Kathi Fuchs’ drop top sits on a Fatman chassis, with a fuel injected ZZ4 small block under the hood, while Wilwood disc brakes bring the fun to a safe stop. Pat and Ethyl Quinn cruised over in their home-built ’40 Chevy convertible. The Special Deluxe uses LS power for a smooth desert evening cruiser and we dig the Caddy hubcaps.

STREET ROD LIFE Vol. 1, No. 1

Not everything needs to be built or customized! Alan Barker’s ’53 Henry J looks great in all its original form including the 4-cylinder and 3-speed trans.

One thing we highly recommend is getting your car on the autocross track. If you’re showing your car at Goodguys event, you can run it on the autocross (as long as it passes tech). Don’t plan to go out there and set record laps, just enjoy the chance to toss your car around and see how it handles. Beware though — chances are you’ll be roaming through the manufacturer’s area looking for tires, shocks, and swaybars before you go home.

Mary Pozzi ranks as one of the best known drivers in autocrossing and can be found at a track or course most weekends. Here she’s getting ready to make a lap in her ’71 Camaro.

24/7

RS-1 HIGH BACK SPORT SEAT • Leg, Lumbar & Shoulder Support • Designed for Factory Belts or Aftermarket Harnesses • Mount with Aftermarket Seat Mounts (available separately)

179

555-702100

TECH SUPPORT

FROM

FREE SHIPPING & HANDLING!* ORDER BY 11PMEST FOR SAME DAY SHIPPING! 15026788 *VALID ON ORDERS $30 AND OVER SHIPPING VIA GROUND SOURCE CODE

CALL TODAY! 1-800-345-4545

SERVICE WITHIN THE CONTIGUOUS UNITED STATES ONLY. SOME EXCLUSIONS MAY APPLY. SEE JEGS.COM FOR DETAILS.

From classic cruisers to the hottest rods, JEGS has been your high-performance source for more than 55 years. With over a million parts online and same-day shipping of in-stock items, JEGS is dedicated to complete customer satisfaction. Our 24/7 technical support staff is available to share countless hours of combined experience to make sure your project gets done right with all the parts you need the first time… Guaranteed!

STREET DEMON CARB

CHEVY ZZ502 ENGINE

• 625 cfm • Vacuum Secondary • Electric Choke • Black Ceramic Coated Finish

• Fully Assembled 100’s of Engines in • 502HP/567TQ Stock

only

502-65670

from

257 99

746-PCE147.1034

140 99

$ 95

DUAL CIRCUIT COOLERS 259-15200

809-19201332

only

333-1901BK

only

366

8874 99

• Big & Small Block Chevy • Kits Include 18 Gauge Tubing, 5/16” Flanges, Collectors, Gaskets & Bolts.

• Big Block Chevy 454 • Height: 4.650” • Non-EGR • RPM Range: 1500-6500 • Satin Finish

WELD-UP KITS

ELIMINATOR INTAKE MANIFOLD

• Cools Two Systems with One Compact, Space-Saving Design • Reversible 10” Tornado Electric Fan m • Includes (2) -8AN x 3/8” & (2) -8AN $ fro x 1/2” Brass Hose Barb Fittings

188 99

MAGNUM DRAG • 786 Series Version 2.0 • SFI spec 15.1. Sizes 15 x 3-1/2 to 17 x 2-1/8 • 1-PC Forged Center • Anodized Gold or Polished

from

418 99

When was the last time you saw a restored ’48 Studebaker cab-over? Mark Novak made the trek from Ventura, California, to show his fine example of a rare truck.

Jack Brower’s ’40 Ford is celebrating its 75th birthday this year, though you couldn’t tell it from the bright yellow paint with contrasting orange wheels. The sedan looks better than when it was new and is more fun to drive too.

Gordon Apker is the lucky owner of this low mile ’52 Olds. We’re talking original with a capital “O” with less than 30,000 miles on the 303c.i. mill. It wouldn’t be a Goodguys show without a woody wagon or two. Ray Tognarelli kept his ’46 Ford all Ford, with a 351W/C4 combo, along with a surfboard that probably doesn’t see too much action in the Arizona desert.

We’re not sure how long this ’30 Tudor has been under the knife in Tim Tuley’s garage, but the time was well worth it. He chopped, channeled, and louvered it, then bolted in a big 468c.i. big-block Chevy backed up by a Muncie and a 9-inch Ford. The copper/bronze hue on this ’35 Ford sedan of Gord Evans was glowing in the Arizona sun, which really makes sense since he came from Kamloops, British Columbia.

STREET ROD LIFE Vol. 1, No. 1

When The Way Is The Right Way. They Say The Right Way Is Rarely The Easy Way, But Thanks To FAST™ That’s All Changed With EZ-EFI® Self Tuning Electronic Fuel Injection Systems. With two proven EZ-EFI® systems now available from FAST™, the conversion to self tuning electronic fuel injection has never been this attainable. Both systems are available for carb conversion and multi-port applications, as well as in multiple fuel system configurations to fit practically any engine/vehicle setup. Simply hook up the unit, answer the basic questions on the included hand-held and the system tunes itself – no laptop computer or tuning experience is needed. Designed by engineers with over thirty years of performance fuel injection know-how, these systems deliver highly refined EFI technology that does all the work for you. Easily, the right way.

LIMITED LIFETIME WARRANTY

FAST™ offers a limited lifetime warranty on all EZ-EFI® systems, along with the industry’s best technical support team should you need product advice.

PROVEN SELF TUNING TECHNOLOGY

Easy setup, compact hardware and refined tuning logic provide an incredible driving experience and combination flexibility.

DETAILS MAKE THE DIFFERENCE

Unlike other EFI systems, FAST™ includes every bolt and fitting needed for a hassle-free install that can be performed by the average enthusiast.

NEW

• 4 Injectors; Handles Up To 650 HP

• 8 Injectors; Handles Up To 1200 HP

• Multiple Kits Including Dual Quad

• Nitrous, E85 & CAN Compatibility

• Value Priced & Easy To Install

• Built-In Electronic Timing Control

The #1 Choice In Self Tuning EFI

Not Sure Which System Is The Right Fit?

1.877.334.8355 • WWW.FUELAIRSPARK.COM •

9543z

Scan this QR code to watch our video tutorial on selecting the right self tuning EFI system, or learn even more at our new website: www.ezefi.com.

#EZDOESIT

FLAMES of Flattery

This Dodge A100 Cabover is the stepchild of the famous McMullen Roadster 38

STREET ROD LIFE Vol. 1, No. 1

o the flames on this wild ’70 Dodge A100 look familiar? If you thought they were influenced by the famous ’32 McMullen highboy, you’re correct — kind of. This A100 cabover was built by the same Tom McMullen (yes, that McMullen who founded Street Rodder magazine).

The flames and black are about the only things that tie this McMullen built A100 to his famous roadster. McMullen wanted to build something wild to use on the street and strip and the blown big block mounted behind the driver certainly reached that goal, though we found no documentation about dragstrip testing.

It’s just that the poor ol’ Dodge didn’t quite get the attention that the roadster received. The story is that McMullen didn’t build many cars for quite a few years, but eventually decided to get back into the mechanical fray of hot rodding. He set about building a car that would be highly competitive on the

The removable rear section was easy to roll out from under the sheet metal for access to restore and set the blown big block in, as shown in this August ’74 cover of Street Rodder magazine.

The original interior was complete…as in completely disgusting with a film of grime and goo over the crushed velour gold and red fabrics. Note the chrome roll bar, column, and cast gas pedal.

Here’s the same rear assembly being restored at StreetToys.

The straight axle, leaf springs, and front end components were disassembled to receive fresh plating and paint before going back together, just as Tom did forty years ago.

STREET ROD LIFE Vol. 1, No. 1

strip, but could still be driven on the street — and he wanted it to look wild. Like many rodders, McMullen worked with what was available, which turned out to be a worn out shop truck from his motorcycle parts company. The first step to achieve the “wild” target was an 11-inch chop to the top, while the rear wheels were moved 7-inches towards the rear. A big-block Chevy topped with a 6-71 blower was positioned behind the driver and integral to a trick chassis setup that could easily be disconnected and rolled out from the body by removing a couple of well-placed pin assemblies. The engine arrangement and body modifications weren’t the only things to get wild. The interior was flooded with crushed gold velvet and maroon shag throughout. There was also a chrome rollbar and a chute release at the ready (McMullen planned to run the truck). The truck was featured on the cover of the December 1974 issue of Street Rodder, along with a cover shot of the removable driveline assembly on the August issue earlier in the year. A side note is that rival magazine Popular Hot Rodding was building a lowbuck ’33 Ford pickup at the same time, which escalated into a drag strip challenge. The match-race was documented in the March, 1975 issue of PHR but the cabover experienced a blower drive failure and flat tire. After that, we have no notes or history of how the Dodge spent the next three decades. Speculation is that the truck went to Michigan, where some guys pulled the engine and transmission then basically pushed the Dodge into a warehouse. Somehow it ended up in Oklaho-

Since the interior was pretty much complete when the truck went to Street Toys, there wasn’t a lot of guess work to be made during the restoration. However, we’re not sure where they found the shag and yellowish-gold velour fabric in this day and age.

A fresh big block was built and topped with a 6-71 blower and period correct accessories. Street Toys fabbed the custom intake using old magazine articles and photos as a guide.

ma, before being posted on eBay. This is where our story picks up. If you pay attention to rare muscle car discoveries and barn finds, the name Michael Lightbourn may ring a bell. Lightbourn hunts the southwest region, and beyond, sniffing out lost cars like Ted Nugent on an African safari. He also played a key role in the restoration of the McMullen Roadster with the team at Roy Brizio Street Rods by finding missing components, parts, and lost history on the car. After learning so much about McMullen, it was no surprise that he ended up with the A100. Besides the expected wear from neglect and warehouse storage, the little Dodge was surprisingly complete, just as McMullen had built it. The blown big block and trans were long gone, but the custom Hooker head-

ers, exhaust, tow bar, custom dual Moon tanks, and even the leaf-springs turned wheelie-bars were still there. Interior wise, the crushed velvet gold and red shag work was all still in place. Lightbourn felt the A100 deserved to be brought back to its wild street glory, so he teamed up with his restoration partner Jessie Gonzalez, and his shop Street Toys Hot Rods and Customs in Juarez, Mexico. As you can see by the pictures, the crew at Street Toys did an outstandingly respectful restoration. From the dedicated flame patterns and paint fade work to the custom rear suspension and full-on groovy interior fabric, the truck is a time-capsule of early ’70s street with the styling of extreme indoor show cars of the period. It’s really a fun piece to see restored. Hats off to Lightbourn and Gonzalez for saving a piece of street rod history. SRL

This is the top of the custom dual Moon tank assembly (picture a two story tank if you will) custom built for McMullen along with the original tow hitch.

A quad assembly of Hijacker shocks combined with a custom Watts link style rear suspension were tasked with getting the power to the ground. We’re not sure if the system was ever tested or proven by Tom, but in ’74 it was cutting edge thinking. STREETRODLIFE.COM

Bad Mutha

THUM Get that sound you’re looking for without sacrificing driveability

STREET ROD LIFE Vol. 1, No. 1

MPR

hat’s most important in a street rod: performance, sound, or driving manners? If you ask three different rodders to pick just one, you more than likely will get three different answers. Yet with today’s camshaft technology it really is possible to have all three — the performance equivalent of having your cake and eating it too. The concepts of actually driving a street rod to a show, using it to run errands, or just taking it out for a cruise are infinitely cooler these days than the oft-maligned practice of trailering a beauty queen whose wheels barely touch the ground. Sure, it’s important for a ride to look good, but that is no longer the only concern for many owners. “I believe most street rodders want something that sounds like a hot rod or ’60s-era muscle car, but drives with much better manners. Fortunately, accomplishing this is right in our wheelhouse,” says COMP Cams Performance Account Manager Jay Adams.

“Twenty years ago we didn’t know we could have a car with a snotty-sounding attitude and be able to drive it on a daily — or regular — basis with much reliability,” he adds. “There was always that tradeoff. Nowadays, it’s become a much more attainable goal to have both.” COMP Cams does this primarily through its popular line of Thumpr Cams — available in what the company calls Thumpr, Mutha Thumpr, and Big Mutha Thumpr versions, based on application and how radical the engine package is. The name is derived from a customer who told COMP Cams staff during Hot Rod Power Tour many moons ago that he “wanted the mother to thump.” That’s the PG-13 version; you can use your imagination to fill in the rest. Thumpr cams produce the trifecta of power, sound, and street manners through an early intake valve opening, long exhaust duration, and a generous amount of intake and exhaust overlap to maximize idling characteristics (we’ll get into the specifics of what all of that means a little later). These specs are similar to ones used in endurance road racing, such as the 24 Hours of Daytona, because they provide a broad torque curve, allowing for enhanced drivability over cams that are solely designed for sound and power. 44

STREET ROD LIFE Vol. 1, No. 1

believe most street rodders want “Isomething that sounds like a hot rod or ’60s-era muscle car, but drives with better manners. ” The cams are available in retro-fit hydraulic roller and hydraulic flat tappet versions, as well as hydraulic roller drop-in replacements. They work with factory cylinder heads and valve springs that will not break the bank. “The Thumpr Series was designed from the ground up for street rod applications,” says COMP Performance Group technician Matt Maxwell. “It has a tighter lobe separation and special lobe profile to maximize sound, but retains good drivability compared to a conventional cam with a similar rough idle.” One note that both Adams and Maxwell make is the fact that many of today’s hot rodders are adding vacuum-assisted power brakes, air conditioning, and so on to their vehicles. The downside of these modern creature comforts is that they can put a pretty hefty demand on the engine to maintain a high vacuum signal. Therefore, it’s important to consider running a vacuum canister or vacuum pump with a Thumpr cam if your ride features any vacuum-assisted components.

“We can still accomplish that radical sound people are so crazy about, but yet still maintain the vacuum requirements of the vehicle,” Adams says. “Our team of technicians is second to none when it comes to delivering power, sound, and reliability.” Of course, a rodder may also choose that he or she wants to focus on only one or two areas in terms of performance, sound, and street manners. To do this the number one cam spec to consider is lobe separation angle (LSA). LSA is the angle in camshaft degrees between the maximum lift point of the intake and exhaust lobes. A wide LSA (110–118 degrees for example) will produce greater low-end torque, a smooth idle, and a wider powerband. In essence, drivability and overall performance will be the major benefit, while some horsepower and rough idle sound will be lost. On the flip side, a more narrow LSA (106–109 degrees) will produce more top-end power, allow for more peak horsepower and torque, and have a

rougher idle. However, some drivability could be diminished. Duration at .050-inch is also an important factor that will affect power, sound, and driving manners. Duration is the amount of time the lobe is creating lift, measured in degrees of crankshaft rotation. The rpm at which peak horsepower occurs is typically increased as duration increases, but at the expense of low-rpm torque. Since there are various instances of lift throughout a valve event, the .050-inch number states the exact point a measurement is taken and is used to estimate where peak power will occur. Increasing duration also increases overlap — the number of crankshaft degrees during which both intake and exhaust valves are off their seats. Increasing duration without a change in lobe separation angle will result in increased valve overlap, and thus a rougher idle, along with more horsepower, but some drivability loss. Valve lift will also have an effect on power output (greater lift is naturally equal to more power), but it has the least effect on sound and drivability. For those that are looking for the most power and a throaty sound in ve-

hicles that see limited street use, COMP Cams Magnum Camshafts may be a good choice. The cam manufacturer’s Xtreme Energy Series is designed to provide throttle response and top-end horsepower for street and strip performance and drivability, along with a noticeable idle that is louder than stock, but not overbearing. The Thumpr Series meanwhile incorporates elements from both of these options.

“The street rod market is pretty wide open,” Maxwell says. “Engine combos vary from mild small blocks to wildblown big blocks. The GM LSX engines are very popular as well. I find that most street rodders value good drivability over all-out horsepower, but the sound of the cam and engine is always important too. We try to help the customer find the best camshaft to achieve his or her goals and fit well with their particular engine combination.” SRL Source: COMP Cams, compcams.com

It’s In The Details... The extra effort that goes into making each and every ARP fastener is evident in the final product. There are those companies whose primary concern is having the lowest price. Obviously, this means compromising material quality and taking shortcuts in manufacturing. ARP, on the other hand, stakes its reputation on quality; using only the best materials, employing extra manufacturing steps to perfect each fastener, and having relentless quality control. Moreover, ARP fasteners are

800-826-3045

www.ARP-bolts.com

manufactured entirely in our own ISO 9001:2008 and AS9100 registered facilities in Southern California. Look for the “ARP” stamped on each fastener as your assurance of quality. Check out our new 10-32 stainless steel 12-point bolts. They’re great for adding a finishing touch to your rod or custom. They, and over 250 other new products, are in the 2015 catalog available online or by request.

Get a FREE copy of the new 2015 catalog online

NEW

#10 12-point stainless steel

The

STREET ROD LIFE

A Little Help from My Friends Street rods don’t build themselves and sometimes you need a hand or two to get your project done. Bob Adams, Jerry Kilgore, and Jerry Johnson all chip in to get their pal Mike Griffin’s ’32 Ford drag chassis together. You can find these guys all hanging out at their HQ in El Paso, Texas, or at major events around the southwest.

STREET ROD LIFE Vol. 1, No. 1

Matching Ford’s EcoBoost V6 with a Factory Five ’33 gives a glimpse into the next wave of hot rodding

Words Barry Kluczyk/Photos Ford

STREET ROD LIFE Vol. 1, No. 1

ne of the stars of last fall’s SEMA Show in Las Vegas was the Ford Racing-powered Factory Five 1933 Ford roadster. It displayed the contemporary aesthetics of a pro-touring-influenced hot rod, but the standout feature was the powertrain — Ford’s EcoBoost 3.5L twin-turbo V6 — a crate version of the engine found in vehicles such as the Ford Taurus SHO and police interceptor models. It was a high-tech heart for an equally modern assembled hot rod package, designed to illustrate the high-performance versatility of the EcoBoost crate engine — and the all-new controller Ford has finally released for it. In fact, it suggested a new, decidedly 21st century direction for street rod construction and performance. One where factory-engineered powertrain packages such as the EcoBoost V6 are matched with plug-and-play control systems to deliver a more contemporary driving experience. Think about the progression of the hobby for a moment and all of the V8 engines installed in 1932–34 Ford street rods over the years. The vast majority have been small-block Chevy engines, right? Among them, a high percentage have been off-the-shelf crate motors, such as the ubiquitous ZZ4 350, with all its 355 dependable-as-the-rising-sun horsepower, and 405 lb.-ft. of torque. It’s rightfully been a fixture of the industry for decades.

What’s not to like about an all-aluminum, direct port injected, twin turbocharged engine in a street rod? Is this the future of rodding?

While rodders are increasingly turning to GM LS-based powertrains for their balance of high performance and low weight, compared to the old-school Chevy smallblock, there is still a strong, defiant coalition of builders who understandably feel that anything going under the hood of a Ford body should have Dearborn roots. That goes for repro bodies, too, like Factory Five’s 1933 Ford roadster. The F-150-based EcoBoost turbocharged V6 is rated at 365 horsepower and 420 lb.-ft. of torque. That’s more power than the classic ZZ4, with the flatas-a-board torque delivery that’s characteristic of a turbo engine.

STREET ROD LIFE Vol. 1, No. 1

Along with undeniably stout power, the EcoBoost engine makes a convincing alternative to Ford’s own Modular family of V8 crate engines. That’s primarily because the typical mod-motor casts a rather large shadow. Of course, mod-motor rods are nothing new, but their relatively large size makes them much tougher to squeeze between the fenders of vintage Fords. There’s also a vehicle dynamics advantage to using the somewhat compact V6, because it sits a little farther back in the chassis, enhancing the front-to-rear weight balance and freeing up room at the front of the chassis for the radiator

and accessories such as air conditioning. That’s not to say the turbocharged EcoBoost engine is as narrow as a four-barrel equipped Windsor or even a Chevy engine — it is a DOHC architecture, after all — but it nonetheless offers installation advantages over the Modular V8s. Pairing the new EcoBoost crate engine with the Factory Five platform was a match made in high-tech hot rod heaven. Like their Cobra-style replica cars, Factory Five’s 1933 Ford hot rod is more than just a facsimile body rendered in fiberglass. The company engineered a robust tube chassis for the vehicle that’s more

akin to a race car chassis, along with contemporary suspension features including a coil-over front suspension. Make no mistake: This is a chassis designed to be driven — and driven hard. As a rolling chassis with the body mounted on it, the Factory Five ’33 tips the scales at less than 2,500 pounds — even less in the fenderless roadster form used for this hot rod — which reinforces the balance equation offered by the roughly 450-pound EcoBoost 3.5L V6 (including accessory-drive components). “The power-to-weight ratio with this combination is terrific, giving the car a great feeling of power on demand,” says Andrew Casselberry, the project manager at Ford Racing Performance Products (FRPP). “It’s also well-balanced power, as the torque delivery via the turbochargers is immediate and sustained through most of the

rpm band. All in all, it’s as satisfying as any V8 powered hot rod.” While it’s not the primary consideration for most rodders, there’s a fuel economy aspect to the combination that cannot be ignored. The Taurus SHO, which has the same engine, is rated at 25 mpg on the highway. With nearly 2,000 fewer pounds to push around, the EcoBoost should deliver efficiency that would make the greenest of environmentalists well… green with street rod envy. Marrying the Factory Five body/ chassis and the EcoBoost powertrain fell to longtime Ford prototype vehicle builder Watson Engineering. Under the forward-hinged hood, the engine is stock from the F-150, which is tuned to deliver 420 lb.-ft. of torque — a significant 70 lb.-ft. increase over the Taurus SHO’s version of the engine.

For the record, a pair of Borg-Warner K03 turbochargers push 12-pounds of boost into the all-aluminum, direct-injected DOHC V6. The engine wears a lightweight composite intake manifold and incorporates a unique air intake with a filter box created by rapid prototyping. Additionally, factory exhaust manifolds blow into a custom exhaust system that doesn’t include mufflers, giving the car a raspy voice at idle, and a high tech mechanical wail at wide open throttle. The engine is backed by a TREMEC six-speed manual transmission, which channels the torque via a Dynotech custom driveshaft to a Ford 8.8-inch rear axle. It’s located with a four-link rear suspension that also incorporates Koni shocks. Up front is a set of unequal-length tubular control arms, inboard coil-overs,

From the side, other than not seeing any headers peeking out from under the hood, you would have no inkling about the modern power plant within this Factory Five ’33.

and Factory Five’s rack-and-pinion steering system, which gives the lightweight hot rod the responsiveness of a modern sports car. The car also stops with the capability of a modern car, thanks to a Wilwood braking system that incorporates Mustang-sourced 11-inch slotted disc rotors and Brembo four-piston calipers. It all meets the Tarmac on Pirelli-shod Ford Racing Shelby GT500 wheels in black — 19x9-inch on 255/40ZR19 tires in front and 19x10-inch rims on 285/45ZR19 tires in the rear. The fenderless body was sprayed a deep ruby red (that’s actually an F150 pickup color), offset by a matte black

center stripe with silver accent stripes that run the entire length of the car. The body color is picked up under the hood too, and is used on custom twin air intakes and intercooler covers. The paintwork was performed by Ice Nine Group in Mount Clemens, Michigan. Inside, the EcoBoosted roadster incorporates an integral roll bar that’s part of the rigid chassis. The interior is nicely trimmed with leather bucket seats and finishing details you don’t necessarily expect in a kit-type assembled vehicle. An Ididit steering column and a full complement of Auto Meter gauges are conventional street rod accesso-

ries, while features including a Shelby GT500 shifter with leather boot reinforce the link to Ford. The overall fit and finish is excellent. As we mentioned, crate engines such as the EcoBoost 3.5L V6 point to the future of hot rodding and this showcase is more than a mere SEMA Show flight of fancy. Factory Five will now offer their 1933 Ford with the provisions for the engine. Whether rodders embrace engines other than the V8 remains to be seen, but from what we see in this uniquely styled and thoroughly modern take on street rodding, we hope it’s a trend that will gain momentum quickly. SRL

STREETRODLIFE.COM

Talking

TORQU How to pick the right converter for your street rod 54

STREET ROD LIFE Vol. 1, No. 1

UE Different cars will require different converters. A torque converter for a lightweight highboy is going to be different than that of a full size woody wagon.

o you have your rod all buttoned up and are just loving the sound of the new thumping, rolling cam as it warms up in the driveway. When you drop it gear however, the car lurches a bit and drops an annoying clunk sound to the dismay of your passenger.

Worse yet it seems to idle poorly at lower rpm, but tries to inch forward if you bump up the idle. These types of negative characteristics make it no fun to cruise, but thereâ&#x20AC;&#x2122;s an easy solution â&#x20AC;&#x201D; the proper torque converter.

The torque converter, that mysterious piece mounted to the flexplate and the transmission input shaft, is one of the most important parts when it comes to the overall driveability and function of your street rod. This is especially true when you chose a cam with a bit more of an aggressive hot rod rumble or build up a bit more power. Before getting into choosing the best converter for your rod, letâ&#x20AC;&#x2122;s review what a converter does and understand stall speed. A torque converter was the answer to replacing a mechanical clutch so an automatic transmission could be used, whether the engine is at idle or pushing down the road. It acts as a fluid coupling device, meaning it transfers rotating power from the engine to a driven device through the

means of fluid control. It can also multiply the torque as the input and output components turn at different speeds. The converter is made up of two different halves that can spin at different speeds. This is where the term stall speed is derived, which weâ&#x20AC;&#x2122;ll touch on shortly. The front of the converter, which bolts to the flexplate, houses the turbine and is also connected to the input shaft of the transmission. The turbine will always try to spin at the speed of the engine, but fluid control keeps the car from moving.The fluid is controlled by the stator and the pump. The pump (or impellor) is connected to the other half of the converter and will redirect (or slip) the fluid to the turbine, allowing the engine to run at idle with the transmission in gear.

The stator of the converter changes the fluid flow between the two halves of the converter providing the torque multiplying function of the converter.

Fluid direction and control is managed by a component known as the stator. As rpm increases, there is a point where the fluid flowing through the pump and stator change direction and the two halves basically couple together, which makes the car start to move. The point at which this occurs is known as the stall speed. By increasing the stall speed a few hundred rpm, especially on a hot-rodded engine, you’ll see a dramatic improvement in the idle characteristics, and the car will really take off since the rpm will be closer to the ideal torque curve of your engine. To find out the flash stall of your current converter, in a safe area, put the car in drive and hold the brake firmly. Keeping an eye on the tach, stomp the gas wide-open. The rpm the engine reaches just before the car moves is the true stall speed. In stock applications, that may come just off idle, say at 1,000–1,200 rpm. This could also be the source of poor idle consistency. By increasing the stall another 500 rpm for example, the car would idle better and produce a more firm launch

Before Calling TCI When you call the TCI Tech Line for help in determining the best converter for your application, be prepared to answer a few questions. Choosing the proper converter requires looking at the entire vehicle and driveline.

Which transmission: What model transmission are you using and has it had any modifications? If it’s an electronically controlled transmission, whose controller are you using? Vehicle Weight: They need an idea of the weight of the car to help make the right recommendation.

and clunk-free entry into gear. So how do you know which converter is right for your street rod and drivetrain? That depends. Do you have a quick-reacting, high-revving, small block in a lightweight car, or a lopey big block in a 4,500-pound cruiser? Those details change everything, and the best way to determine which converter is right for you is to contact a manufacturer.

The Crane Cams Energizer Series is designed with single pattern profiles and tight lobe separation angles to produce increased torque and throttle response for non-computer street vehicles. Energizer Cams are offered in both a broad range of duration and engine applications to match your specific requirements. Whatever your need—a smooth street cruiser, a drive-in demon or a rough idle, high RPM weekend warrior, there is a cam design for you. Available in either “cam and lifter kit” or “cam only”, Energizer Cams are the best buy in a true performance camshaft.

Engine Details: What kind of power is your engine making and what size? Camshaft Specs: The more information on the cam specs the better! If you have the part number, the cam card, manufacturer and/or the duration, lift, and lobe separation specs, things will be easier! Rear Gear Ratio and Tire Size: Final gear ratio in the rear end is key to converter selection for off-idle operation and cruising. How do you plan to drive your car: Are you all about stop light to stoplight bursts, or do you plan on a lot of road trips?

TCI is a leader in automatic transmission and converter technology with nearly 50 years of experience in racing and performance. They have a number of different street-based applications for GM, Ford, and Chrysler automatic transmissions that will ensure your rod is ready for the street, strip, and everything in between. Give them a call to find out what converter best suits your needs. SRL Source: TCI, TCIAuto.com

True Bolt-In Horsepower Quicker, Crisper, Throttle Response Increased Torque and Power for Non-Computer Controlled V-8 Engines Matching Hydraulic Flat Tappet Cam and Anti-Pump Up Lifter Kits Energizer Advertised Idle Grind Duration Characteristic 260 Smooth 260 H10 266 Smooth 266 H10 272 Good 272 H10 274 Choppy 274 H06 278 Fair 278 H10 282 Choppy 282 H06 284 Fair 284 H12 286 Choppy 286 H06 302 Choppy 302 H06

Recommended Crane Cams 10W-40 Break-In Engine Oil

Tech. Support 866-388-5120 cranecams.com

STREETRODLIFE.COM

TOOLS ACCESSORIES STUFF

PARTS STORE At Street Rod Life, we’re always on the look-out for the new parts that will make our rod a little quicker, smoother, or simply cooler. This installment of Parts Store brings you a variety of great new products to hit the market. If you would like more information, follow the website or give them a call — be sure to tell them Street Rod Life sent you!

Be an Outlaw Lunati, Bootlegger Cams Do you play by your own set of rules? If so, the Bootlegger Series Cams from Lunati are designed for you. These are the most powerful series of street performance camshafts ever produced by the Lunati design team. They are based upon their popular Voodoo Series, but feature even faster opening rates, a controlled closing, and far more area under the lift curve. This extremely aggressive design provides tons of low- and midrange power, exactly where you need it for back-road adventures and stoplight-to-stoplight performance.

Adjustable Comfort JEGS, RS-1 High Back Sport Seat Get firm yet comfortable body support with the RS-1 High Back Sport Seat from JEGS. It utilizes simulated leather to resemble the real thing without the high price. The RS-1 fits both the driver and passenger sides, plus accommodates factory seat belts or aftermarket harnesses. Adjustments include recline, tilt forward, and slide. Mounting dimensions: 10.75 inches long, 13.5 inches wide. Aftermarket seat mounts required (sold separately due to seat’s universal design). jegs.com 800.345.4545

STREET ROD LIFE Vol. 1, No. 1

Bootlegger cams provide a killer exhaust note that lets others know you are no one to be messed with. These cams don’t just provide good sound — they provide proven gains of more than 40 horsepower. Bootleggers are currently available for three common hot rod engine platforms, which means they probably have the perfect cam for your street rod. The box it comes in will look great in your mancave too! lunatipower.com 662.892.1500

Keep the Pony Cool Flex-a-lite, Direct Bolt-in Aluminum Radiator Keeping your Mustang cool is one of the most important aspects to enjoying your time behind the wheel. No one likes to watch their temp gauge climb during traffic light stops or at the cruise and Flex-a-lite has a solution. They now offer a direct bolt-in aluminum radiator for ’67– ’69 Mustangs with V8 engine swaps. A two-row core is fit with hand-welded tanks that feature their patented “T” channels to efficiently dissipate heat as well as offer improved mounting for the fan, optional expansion tanks, or oil cooler. The electric fan assembly is pre-mounted from the factory and features integral wiring including an adjustable thermostat, A/C terminal, and override wiring. With the extra cooling capabilities of the radiator combined with the electric fan and controls, the Flex-alite radiator assembly is a compact, one stop solution for Mustang owners (they also offer a kit for ’64–’66 models). If you need custom applications or different inlet/outlet locations, Flex-a-lite can handle your needs! flex-a-lite.com 800.851.1510

Cooler Fuel Quick Fuel Technology, Quick Cool Carb Insulator Kit

Rock ‘n’ Roll COMP Cams, High Energy Die Cast Aluminum Roller Rocker Arms Finally, you can get high performance without a high price. COMP Cams High Energy die-cast aluminum rocker arms were developed to provide a superior strength to weight ratio that can withstand the hardships of your street performance and mild race engines, while also adding valve lift. These larger-than-stock rocker bodies are designed to be stiffer and more durable. They feature needle-bearing fulcrums and roller tips to reduce friction and lower oil temperatures for even more horsepower potential. Maybe you’re on a budget, or maybe you just appreciate getting the most for your coin — now you can make an affordable choice without sacrificing performance. compcams.com 800.999.0853

Today’s poor quality fuels are more susceptible to issues due to high under-hood temperatures, especially within the carburetor. To help reduce these issues, the crew at Quick Fuel Technology (QFT) developed a high resistant coating for their carbs and intakes called Black Diamond. QFT now offers a Quick Cool Carb Insulator Kit that will reduce heat transfer to the carb. The Insulator is a thin aluminum and poly-core sandwich that fits between the carburetor and manifold, and deflects heat away from the carb main body and fuel bowl area, plus reduces heat transfer from the manifold flange to the carb base. The bottom layer of aluminum deflects some of the heat around the insulator, while the poly-core reduces the heat transfer, and the top layer is designed to dissipate any heat that might get through. The Quick Cool Carb Insulator Kit is designed for 4150-style carb flanges and fits QFT, Holley, and Street Demon carbs. quickfueltechnology.com 270.793.0900 STREETRODLIFE.COM

TOOLS ACCESSORIES STUFF

PARTS STORE EZ Does It FAST, EZ-EFI Fuel FAST has upgraded its entry level and simplest self-tuning EFI system. Designed for applications making up to 650 horsepower, it features a die cast and black powder-coated, four-injector throttle body with integrated fuel rails. Providing better fuel distribution and more airflow than the original, it also utilizes a secondary idle stop to help with idle adjustment. No laptop or tuning experience is required. A color hand-held touchscreen features an improved Setup Wizard that after a few basic questions, tunes itself as you drive. It includes a variety of display dashes, an easy-to-use interface, and an LED indicator that signals errors or can even be used as a shift light. The streamlined wiring harness incorporates a premium loom and added protective fuses, while the ECU hardware has been further upgraded to protect against electrical/ignition noises and hardware damage. It’s never been easier to make the switch to EFI. See our story on page 80. fuelairspark.com 877.334.8355

Bias Looks Coker Tire, American Classic Radials

Ram Horn Flow Flowtech, Rams Horn Exhaust Manifold In many cases tubular headers just may not fit the style of your rod, or maybe they simply aren’t available for your combination. Flowtech now offers a new Rams Horn cast iron exhaust manifold for the small block Chevy that delivers a cool look and a clean fit. The manifolds are designed to hug the block to provide clearance for even the tightest chassis and engine covers. The internal ports feature a smooth transition with 1 5/8-inch primaries to evacuate the exhaust gasses ending in a 2.5-inch collector that has 3/8-inch thick material providing a leak-free connection to the exhaust pipes. Flowtech provides heavy duty aluminum gaskets combined with thick cast flange pads for a tight seal. The Rams Horn manifolds are also available in high heat black, chrome, or in a silver metallic ceramic thermal coating. holley.com 866.464.6553

STREET ROD LIFE Vol. 1, No. 1

The new bias-looking radial tire offers the tall and narrow profile of a bias-ply tire, combined with the modern qualities of a radial tire. Available in nine sizes, the new line of American Classic radials offer fitment on a number of popular applications, such as the Ford Thunderbird, Chevrolet Corvette, Cadillac, and many others. Coker Tire’s new American Classic radials are made in the USA and thoroughly tested to ensure superb quality for your collector vehicle. You can trust that American Classic radials are ready for the road, but they’re also ready for the show field with beautiful styling, which includes the “pie crust” shoulder and vintage-style tread pattern. The variety of sizes also gives hot rodders and custom car builders plenty of options for big-n-little combinations. The radial internals make it the perfect choice for a car that will see plenty of miles. cokertire.com 866.516.3215

Fitting Five Gears McLeod, Muscle Car 5 Transmission For GM muscle car owners that crave a 5-speed transmission, but donâ&#x20AC;&#x2122;t want to modify their floor or linkage of their car, McLeod Racing has developed an entirely new Muscle Car 5 Transmission with a 2.95 first gear and .63 fifth gear! The most impressive part of this transmission is that it has been designed in an exclusive new case that allows for fitment into tight tunnels. Gone are the days of cutting your floorboards to be able to get the benefits of improved fuel economy and

Easy Rubbing Bed Wood and Parts, EZ Rub Fortified Penetrating Oil Finish If you have exposed wood in the bed of your truck or even inside on the doors or roof, you need to take extra care to ensure great looks and long life. Bed Wood and Parts knows a thing or two about custom bed wood, and now offers the tools you need to keep your wood in show quality condition, thanks to their EZ Rub. EZ Rub Fortified Penetrating Oil Finish, a product of Kentucky, provides the ultimate in exterior wood protection and enhancing properties. It is formulated from teak oil and is fortified with two levels of protection against UV light. Once applied, it seals and protects the beauty of natural wood, while protecting against mold and mildew. EZ Rub will keep your wood finishes looking great for years of cruising fun. bedwoodandparts.com 877.206.9663

lower rpm that an overdrive transmission provides. The front cover is designed so it will bolt up to your factory bellhousing. The McLeod Muscle Car 5 is full of 8620 forged steel gears and a 32-spline output shaft making it ideal to handle up to 500 lb.-ft. of torque. The gears are fully synchronized for quiet operation and the internal rail shifter promotes quick, smooth shifts. mcleodracing.com 714.630.2764

Cover It Up RHS, SBC Valve Cover Adapter Kit for LS Engines If you hate those ugly factory plastic covers that come on LS Chevys as much as we do, then Racing Head Service has the answer for you. They have developed an adaptor kit that allows traditional Gen 1 small-block Chevy valve covers to be used on Gen III/LS engines. This billet aluminum adapter kit works with center-bolt LS heads and traditional, perimeter-bolt small-block Chevy covers. So whether you want to bolt on a set of trick new aftermarket SBC valve covers, or just want to give your LS a cool and unique vintage look, this kit lets you do it. racingheadservice.com 877.776.4323 STREETRODLIFE.COMâ&#x20AC;&#x192;

TOOLS ACCESSORIES STUFF

PARTS STORE Stack It Up Inglese, LS EFI 8 Stack Systems If you’re liking that classic look on your LS, you might as well complete the look right? This eight-stack induction system from Inglese allows users to bolt EFI throttle bodies to modern LS engines while retaining classic style. These systems are designed to work with either EZ-EFI Fuel or XFI Fuel Injection Systems from FAST. All the necessary components such as sensors, injectors, IAC, and a vacuum plenum are integrated, making the manifold an easy bolt on. Inglese includes cast-in bungs that can be drilled out for running nitrous. Two versions are available: one for LS1-style cathedral port heads, and one for LS3/L92-style heads. The kits include the manifold, throttle bodies, fuel rails, and linkage. The injectors, stacks, filters, and fuel system are sold separately, allowing you to customize to your needs. For those wanting to stay carbureted, these systems also work with Inglese IDA-style carburetors and a complete linkage kit is available. To see them on a car checkout the pictorial starting on page 76. inglese.com 866.450.8089

Brake Building Made Easier Speedway Motors, Universal Brake System Builder Kit Building brake lines is actually the easy part, it’s the hassle of having all of the right fittings, ends, adapters, and retainers that gets confusing. Speedway Motor’s understands the challenges of brake line componentry and now offers a Universal Brake System Builder Kit. This kit is complete with all the lines, valves, fittings, adapters, and clips you need to set up a typical street rod or specialty vehicle brake system. The kit includes 25-feet of 3/16-inch mild steel line, six 60-inch lines, dual outlet master cylinder lines, a Wilwood proportioning valve, residual valves, as well as several adapters, fittings, and line clamps. Save yourself the hassle of standing at the parts counter or staring blankly at a display of fittings and adapters. You’ll be happy you went with Speedway’s Brake Kit in the end. speedwaymotors.com 800.979.0122

STREET ROD LIFE Vol. 1, No. 1

Poncho Q-Jets JET Performance Products, Q-Jets for Pontiacs Pontiac muscle fans will be stoked to see that JET Performance now offers a Quadrajet that has been restored to factory appearance, though has a few internal modifications to improve driveability and performance. Better yet, they offer two models, a Stage 1 and Stage 2. Both models feature sealed casting plugs to prevent leakdown into the intake and all the circuits are checked for proper sizing, while the calibration is checked for proper jets, primary metering rods, and secondary metering rods. The carburetor is then reassembled using the highest quality components with a new float, choke pull-off, and bronze bushed throttle shafts. Stage 2 goes on to receive a fully recalibrated idle, off idle, main, accelerator pump, and high speed circuits to match any modifications done to the engine. Look stock, but go faster! jetchip.com 800.535.1161

Full Package TCI, Transmission Packages If you’re a street cruiser or racer in search of excellent performance and long-lasting durability, TCI has a number of transmission packages to meet your needs. The Street Rodder package is equipped with an automatic valve body to achieve firmer shifts, while the StreetFighter option allows you to manually shift non-supercharged street machines or remain fully automatic. Each package includes the transmission (conventional or electronic), shift firmness customized for the selected package,

converter, cooler, dipstick, and three gallons of their Max Shift automatic transmission fluid. TCI transmissions undergo industry-recognized triple testing procedures that adhere to the strict standards of quality control to insure that you are getting the very best of your ride. tciauto.com 888.776.9824

Wiring Done Right Flaming River, Alternator Wiring Kit

Tighten Up the Timing Crane Cams, HEI Distributor Who should you turn to if you are in the market for a new distributor? Well, because the distributor gear mates to the camshaft, who better than Crane Cams to introduce a high-quality HEI distributor that is sure to keep your fire lit? Crane saw the need for a high-quality street distributor that will also meet the demands on the track, without draining your wallet. The standalone HEI comes with a Crane-exclusive coil and module made specifically to higher performance standards and durability. Mechanically tighter tolerances mean an increase in timing stability and longer life. cranecams.com 866.388.5120

As the number of electronics in use on our street rods continues to grow, more pressure is placed on the charging system. Alternators are growing in output capabilities, but you need to make sure that all of their current is able to be of use to the car and still keep the battery charged. When you’re running a 180 amp alternator, you need more than a skimpy 10-gauge charge wire. Flaming River has addressed this common oversight and now offers a heavy duty alternator wiring kit. This kit comes with everything you need to upgrade your alternator charge cable, ground cable, and all important chassis ground cable. This is a useful performance upgrade for stock alternators or high output alternators up to 250 amps. The kit includes 10-feet of 0-gauge ground cable and 5-feet of 0-gauge wiring that is very flexible for easy routing. A 250 amp ANL fuse and holder are also supplied, along with heatshrink seals, and eight crimp-free cable ends. flamingriver.com 800.648.8022

STREETRODLIFE.COM

TOOLS ACCESSORIES STUFF

PARTS STORE Get Floored CARS Inc., Assembled Tri-Five Floors The floor of your tri-five Chevy provides the foundation that sets the tone for your restoration, as well as the driving experience. CARS Inc. now offers a completely assembled, precision replacement floor pan for ’55–’57 Chevys that will save time and help you do the restoration correctly. The pre-assembled floor comes with all of the pans, supports, braces, and body mounts. Each component is stamped to exact tolerances with the correct appearance and the original gauge of steel. The complete assembly stretches from the front toe board to under the rear seat. Even the welds are in the correct OEM locations, creating a superior restoration piece with the strength and appearance of the factory floor. As with all replacement sheet metal pieces that CARS Inc. manufactures, the tri-five floor is manufactured in the U.S. from U.S. steel. There are three different complete floor pan assemblies available covering hardtops, convertibles, and sedans. carsinc.com 800.227.7462

Protect the Carbs Driven Racing Oil, Carb Defender Fuel Additive

Baer Brakes Baer, 1968–1972 F-100 Brake Systems Old Ford pickups have never been known for their stopping prowess, and they were never really expected to be. They’re trucks. Back in the day, trucks were only meant for work and hauling loads around town. Today, old pickups are cool and the ’68–’72 F100’s make great cruisers. There is no need to suffer with factory brakes or the need for heavy modifications to install big brakes. The new Baer system mounts to the factory drum-brake spindles to mount their 6-piston radial mount caliper to put the squeeze on their two piece 14-inch rotor. Billet machined hubs are also supplied along with stainless braided hoses to complete the installation. Out back, a specially designed 6-piston caliper for the rear easily mounts and even has a parking brake assembly. Baer’s kit is available in red, black, or silver and you can also get the rotors supplied zinc-plated and drilled. Their 6P caliper accepts C5/C6 pads for easy replacement and selection of compounds. baer.com 602.233.1411

STREET ROD LIFE Vol. 1, No. 1

You have probably heard Ethanol fuels are bad for you old carburetor, but do you know why? Ethanol is much more corrosive than the non-ethanol fuel and actually attracts moisture. Designed for carbureted classic and performance vehicles, Driven’s Carb Defender Fuel Additive is specifically formulated to protect against Ethanol corrosion and induction deposits. Special corrosion inhibitors work to prevent expensive repairs and diminished performance caused by Ethanol-blended pump gasoline and the moisture it attracts. As you may know, high levels of Ethanol dilution in the motor oil can also lead to rust and other corrosion problems in the crankcase. This new additive controls combustion chamber residue, along with protecting surfaces of the fuel system and intake tract. The additive treats up to 25 gallons of Ethanol-blended gas, and should be used with every fill-up. This fuel additive keeps the carburetor functioning properly and is designed for the unique needs of classic vehicles that spend much of their lives in storage between cruises and special events. drivenracingoil.com 866.611.1820

Harness the Wires Painless Performance Products, Direct Fit Harness for 1968 Chevelle You may not realize it, but the wiring in your ’68 Chevelle is 47 years old! Over those years it has probably been spliced in a dozen different places and is now powering components it was never meant to power. It’s now time to consider a new harness and Painless Performance offers an all new, direct bolt-in kit! Each kit is supplied with nearly every OEM style connector installed and ready to plug in. This means items like the turn signals, marker lights, and tail lamps all have the correct sockets and bulbs installed. Plus it will support modern accessories like AC, electric fans, pumps, and even fuel injection! There is also a 6-gauge charge wire for higher output alternators and the charge circuit is isolated from the battery through a 150 amp MIDI fuse as well. To keep these high current electrical demands in check, the ground circuit is fully integrated and tied directly to the battery negative circuit. painlessperformance.com 800.423.9696

Breaking It Up Crane Cams, Break-In Engine Oil 10W-40

Boxing an A-Body Hellwig, Frame FX Kit One of the most effective ways to improve the stiffness and handling of a Chevelle is to box the factory chassis. However, this process could take considerable time with measuring, cutting, and fitting steel panels. Hellwig Products is making the task easy and even more effective with their new custom fit Frame FX kit. The Frame FX kit is made up of 14 pre-cut 10-gauge steel panels that match the thickness of the factory frame and fit into the weak points of the factory chassis. Hellwig also engineered another panel that adds an extra body mount to tie the floor to the chassis, adding even more strength to the entire car. In addition, brackets are provided to mount the transmission crossmember, with enough adjustment to accommodate nearly any drivetrain configuration. The increased strength that the Frame FX kit provides results in handling and ride quality improvements, while retaining the factory chassis and mounting points. hellwigproducts.com 800.435.5944

Using ordinary off-the-shelf oil to break in an engine is like bringing a knife to a gunfight — you might last for a little while, but the end result is always going to lead to your demise. Breaking in a new engine is more than just cranking the key. The proper break in of flat tappet camshafts and other engine components, such as piston ring seats, is a critical to longevity and performance. Because of government regulations in recent years, many important ingredients necessary for this longevity and performance have been reduced or removed from oils. To combat these problems, Crane Cams recently introduced a line of break-in oil which contains a heavily engineered grouping of oil additives, including proper levels of ZDDP (Zinc and Phosphorus) to eliminate harsh wear during break-in procedures and to optimize performance potential. Crane Cams 10W-40 Break-In Oil is suitable for all engines and valve train systems. Give your engine a fighting chance! cranecams.com 866.388.5120

STREETRODLIFE.COM

Shoebox IN THE

Barn 66

STREET ROD LIFE Vol. 1, No. 1

A barn find ’56 Chevy is transformed into a cruiser Words/Photos Tommy Lee Byrd

hen Chevrolet introduced the ’55 Chevy along with its new 265c.i. small block, there was no way to know that they (along with the ’56 and ’57 models) would become icons of the 1950s. The cars had distinct styling and those beautiful body lines are burned into the memories of thousands. Even when they were treated as daily drivers and in the mix of other cars on the roads or racetracks, the tri-five Chevys stood out from the crowd. Nearly six decades later, these cars still receive smiles and thumbs up from youngsters to those that saw them on dealership floors. This ’56 two-door sedan has received a second chance to solicit the waves and grins of passersbys thanks to its gripping Matador Red and black paint along with the rumble of a well-tuned engine. STREETRODLIFE.COM

When Corky found the ’56 Chevy, it appeared to be an easy fix that he could build, enjoy, and turn to make a few bucks. Once the Honest Charley Garage crew dug into the project, they realized it was a bit more than they bargained for, so it was time to start from scratch and do it right.

The sedan was discovered in a barn by Corky Coker as an unfinished project during a filming of the TV show Backyard Gold. If you recognize that last name, you’re right — Corky is the President of the Chattanooga, Tennessee-based Coker Tire Company, and he is no stranger to searching out garage finds and backwoods projects. At first, the ’56 looked like it would be an easy build with the car about halfway through a rebuild, but as the guys at Honest Charley Garage dug into the car, a series of unpleasant surprises encouraged them to start from scratch. Some of the modifications and repairs were just not quite up to their standards, so the crew went back to the drawing board and planned a complete build that would combine the high points and design of a ’56 Chevy with just the right amount of modern flare. A 350c.i. small block was machined and assembled by Roberts and Sons, who gave it a few modifications along

It’s hard to go wrong with the tried-and-true small-block Chevy, and this mildly modified mill is good for about 350 horsepower. Finned aluminum highlights provide the hot rod flare along with a Richmond four speed.

STREET ROD LIFE Vol. 1, No. 1

the way. The final assembly included an array of polished aluminum components, including an Edelbrock Performer intake manifold complemented by a list of finned aluminum accessories. Fuel and air is combined through an Edelbrock carburetor, while the spark from a Mallory Unilite distributor lights the fire. The small block exhales through a set of ceramic-coated, block-hugger headers and a 2-1/2-inch exhaust system, complete with Borla mufflers. To keep the hot rod theme and make things more fun for the driver, a Richmond four-speed was put into use along with a classic Hurst shifter. To bring the handling up to today’s expectations, the suspension was rebuilt from front to back, utilizing drop spindles and three-inch lowering blocks to get the ride height just right. The original rear end is long gone, with a Ford 9-inch housing taking its place. A set of heavy duty sway bars were bolted on to keep the car level in the winding mountain roads, along with a set of BFGoodrich G-Force T/A rubber wrapped around 17x7- and 17x8-inch Rocket Booster wheels. All of that go-power is fun, but the ’56 also needed to stop and a set of Baer disc brakes, featuring massive slotted and drilled rotors with six-piston calipers up front and four-piston calipers out back, handle the chore with ease. The sheet metal was all there, but it was in need of a lot of care and massaging far before a few rounds of priming and block-sanding. After it was deemed paint-ready, Ben Giuliano and Jonathan Myren laid down the PPG Matador Red and black basecoat/ clearcoat materials, and followed suit with hours of color sanding, buffing, and polishing. All of the exterior trim, including new bumpers, grille, and lighting came from Year One and are key to the highlights of a ’56 Chevy. While skimming through the Year One catalog, the Honest Charley crew also found a complete interior kit for the ’56, done up in a two-tone scheme to match the paint work. Fully Loaded Interiors installed the new upholstery kit, while Honest Charley Garage installed the new trim pieces and handled all of the tedious interior paint and detail work. Taking a tri-five classic and giving it a hot rod-inspired driveline, along with a hunkered-down stance and comfortable interior, creates quite a cool combination. This ’56 is now ready for a new lease on the street rod life. SRL

Sliding behind the wheel of this â&#x20AC;&#x2122;56 evokes a nostalgic feel, but once you hit the road, you realize there is a lot more performance and handling built into this 210. Fully Loaded Interiors installed the factory-style reproduction upholstery from Year One.

STREETRODLIFE.COMâ&#x20AC;&#x192;

with Relaxed Atmosphere

Car clubs have been around since guys started hanging out and helping each other wrench on cars. Clubs come in as many different sizes, shapes and specs as a Flathead intake, but one thing ties them all together — the street rod. Whatever the flavor, clubs are an important part of our hobby and culture. Some clubs are highly-organized, chartered national organizations that charge dues, hold meetings, promote events, and donate to charities. Others are simply a loose knit group of folks with the same passion. In each issue of Street Rod Life we choose a car club to spotlight. There is not necessarily a rhyme or reason for spotlighting a particular club other than to get the word out about the club, their history, and what activities they are involved in. Who knows, maybe you will find a club located in your area that fits your interests. If you have a club that you would like to have featured, hit us up on Facebook or send us an email to tryden@xcelerationmedia.com and fill us in.

or our first installment of Club Scene, we are featuring a relatively new club (well, at least by street rodding standards) that really doesn’t have a car club sounding name, but more of a lifestyle name — Relaxed Atmosphere, or RA for short. RA may have an unorthodox sounding name, but they also had an unorthodox beginning leading to the name. Coming from the mini-truck movement that was all the rage in the ’90s, RA was actually started in Southern California in 1991 by Mike Shartsis, Mike Palm, and Dave May as an answer to the rules many clubs had for their members about the style of their truck. Back in those days, the mini-truck scene was hot, and clubs had all sorts of rules, like the club logo being painted on the entire back window. “The reason behind the start of the club was simple — to showcase the creative talent that each owner poured into their own vehicle,” Shartsis explains. “We wanted the vehicles we drove to be the stars, not our back window art. It was never about the parties and good times, but about being the best show vehicles at the shows.” As a result, RA went with a stylish, yet simple graphic that blended in rather than overpowered the vehicle. “The only rules were to be yourself and no primer,” adds Shartsis. That mantra still holds today. The only rule before an RA logo can go on a member’s ride is that it must be show-ready, or showing constant progress toward being show-ready. That’s not to say it has to be a million-dollar trailer queen, but it can’t be junk or under construction. A Relaxed Atmosphere means there are no rules (except morals of course), dues, or titles, but instead everyone can have a say with no single-person dictating the show. As a result, the club has grown from its humble beginnings to around 150 members in 28 chapters around the world, including Canada, Japan, and the U.S. Virgin Islands. 70

STREET ROD LIFE Vol. 1, No. 1

“The only rules were to be yourself and no primer.”

Many of the early members were/are in the automotive industry, and as they evolved from the mini-truck scene, they looked to street rods as the next direction. Not only have they found a new mechanical canvas, they have bought in whole-heartedly and continue to take top honors at shows across the country. RA takes pride in their vehicles — and it’s not just small regional shows we are talking about. Many of their vehicles have been finalists and winners at major events like Goodguys, Sacramento Autorama, the Grand National Roadster Show, and even the Detroit Autorama. Members of the group have been responsible for an Americas Most Beautiful Roadster Show finalist and even designed the’55 Ford Thunderbird that won the Don Ridler Award at the Detroit Autorama in 2012. The SEMA show wouldn’t be complete without an RA car being showcased in some manufacturer’s booth. On top of supporting other shows, RA hosts three charity-fundraising car shows a year. They make no profit whatsoever, but instead give it back to the community. The 2015 fundraisers are taking place all over the United States: Relaxing in SoCal is Sunday May 3, in Torrance, California, at the Alpine Headquarters; Relaxed All-Star Event takes place over Labor Day weekend (September 4–6) in Millington, Tennessee, at the USA Baseball Stadium; and Relaxing at the Rock is held June 27 in Portland, Oregon, at Rooster Rock State Park. These shows are always well-attended and are often the first on people’s calendars as a Must-Go. If you manage to make it to one of these events, you will see why they are called Relaxed Atmosphere — Nation’s Finest. SRL

STREETRODLIFE.COM

A PROPER

Lashing 72

STREET ROD LIFE Vol. 1, No. 1

A simple solution for a sometimes complex procedure Words/Photos Jeff Smith

ou’re almost there. You’ve installed that new Lunati hydraulic roller camshaft in your small block. The front of the engine is buttoned up, the intake manifold is on, and the distributor is in and timed. All that’s left to do is to set the preload on the lifters and the engine’s ready to fire. This is where some guys think they have to run the engine and perform a mad-dash lifter preload fire drill while oil splashes all over the engine compartment. But there’s a better way, and it can be accomplished in peace and quiet with no cleanup afterward, because we’re not going to start the engine just yet. Our procedure is easy: All you have to remember is Exhaust Opening and Intake Closing — or EO–IC. Once we explain how this procedure works, you will be able to set hydraulic preload or mechanical lifter lash on any engine from any manufacturer — and you won’t have to memorize firing orders or cylinder numbering. Here’s how it works. Setting hydraulic preload is about properly depressing the small piston inside the hydraulic lifter to its proper height. This preload is established to compensate for engine growth between cold and warm engine operation. You may not have thought about it, but an engine physically grows as it transitions from startup to its normal operating temperature. This growth may be as much as 0.010- to 0.015-inch or more depending upon the amount of aluminum in your engine. To compensate for this growth, the specification for hydraulic lifter preload is usually 1/2- to 3/4-turn on the adjuster to push down on the piston in the lifter. This creates enough clearance to allow the top of the engine to grow, while maintaining sufficient preload in the lifters to keep them quiet. If your engine has a rocker shaft, then you don’t need to worry about this procedure, because the preload is set when the shaft is torqued in place. Adjusting the preload with a shaft requires spacing the shaft up or down, or by changing pushrod length. On individually-adjusted rockers like a small-block Chevy or Ford, the preload is set by adjusting the rocker arm nut. In order to do this, the lifter must be on the base circle of the cam lobe. This is where our EO–IC technique comes into play. To begin, we prefer to remove all the spark plugs to make turning the engine over easier. You can bump the engine with the starter motor, but turning the engine by hand with a long ratchet allows more accurate movement of the crank. We prefer to start with the front cylinder on the driver side and run through each pair of valves for each cylinder going down the row of valves. This way we don’t get confused. Once all the valves on the driver side are preloaded, we then run all the valves on the passenger side. This will require turning the engine over several rotations. Now let’s get started. When you rotate your engine in its normal clockwise direction, the exhaust valve will usually be the first to open (EO). Turn the engine until the exhaust valve is roughly halfway to full lift. This will place the intake lobe on its base circle so we can adjust the preload on that lobe. As you begin to tighten the intake adjuster, you are looking for zero lash, which is when all the clearance has been removed between the rocker arm, pushrod, and lifter. You can tell when this occurs by gently twirling the pushrod between your fingers — the pushrod will tend to tighten up slightly. On new lifters, often the tiny piston in the lifter is very easy to STREETRODLIFE.COM

If you are relatively new to engines, looking at a row of inline valves you might not be sure which is intake and which is exhaust. No worries — just line up the valves with their respective ports. Setting hydraulic valve lifter preload is easy once you’ve run through the procedure a couple of times. The beauty of this procedure is that it works on any four-stroke engine of any origin. When an idea is universal, you know it’s good.

We like to start from the front of the engine on the driver side. In the case of the small-block Chevy, the first valve in line is the exhaust. Rotate the engine until the exhaust valve begins to open roughly a quarter of full lift. This is exhaust Opening — EO.

EO means we set the lash on intake side because the intake lifter is on the base circle of the lobe. While adjusting the poly lock on the intake rocker, rotate the pushrod between your fingertips until there is no clearance between the rocker and the pushrod. This is zero lash.

Setting preload is as simple as tightening the poly lock another 1/4- to 3/4turn, while locking the small Allen lock, just as the poly lock arrives at the intended preload. Use the torque of the poly lock to tighten the Allen lock.

STREET ROD LIFE Vol. 1, No. 1

depress. This can make finding zero lash difficult, especially if the intake manifold is already in place. We like to set lash on a new camshaft with the intake removed, so we can see exactly when the pushrod cup starts to depress in the lifter. If the intake is in place, you can also jiggle the pushrod up and down against the rocker arm to test clearance. This is a great way to determine zero lash. Once zero lash is achieved, you can now turn the adjusting nut to the required amount of preload. Depending upon manufacturer, the preload can vary from 1/4- (roughly 0.010-inch) to 3/4-turn (roughly 0.030inch) of lifter preload. You can experiment with different preloads, but this rarely produces any appreciable difference in the way the engine runs. With the intake preload set and the poly lock tight, continue by rotating the engine while watching the intake rocker. The exhaust rocker will finish its lift curve as the intake begins to open.

Now rotate the engine until the intake rocker is past maximum lift and is approximately halfway closed — IC. This will place the exhaust lifter on its base circle.

After finding zero lash for the exhaust rocker, you can set the preload. With this accomplished, you have completed setting preload for the first cylinder. Now you can begin the process with the next cylinder in line.

Continue turning the engine until the intake rocker is roughly 1/2- to 3/4closed. This is intake closing — IC. Now the exhaust lifter will be on the heel, or base circle, of the lobe and we can adjust the preload on that lifter. Perform the same technique for finding zero lash, set the preload, and tighten the poly lock. You’ve now completed setting lifter preload on the first cylinder and can move on to the rest of the lifters, front to back. You may find that while rotating the engine the intake closing (IC) occurs first. That’s okay. This just means you’ve come into the middle of the sequence.

Once you’ve completed the preload on all the cylinders on one bank, you can move to the opposite bank. Then just reinstall the valve covers, spark plugs, and wires and you’re ready to run.

If you are at IC first, then set the exhaust preload. You don’t have to turn the engine over until EO begins. This procedure can be done in any sequence you like. Once all the valves have been set, we like to go back over all the poly locks to make sure we didn’t miss one. This same procedure can also be used to set valve lash for a mechanical cam. The only difference is setting the lash — or clearance — between the rocker arm and valve tip with a feeler gauge. Other than that, the procedure is exactly the same. If at a later time you can’t remember the sequence of EO–IC, just watch the

valve sequence. Slowly turn the engine over and watch the valves. After top dead center (TDC) on the firing stroke, the exhaust valve will open first and then run through its lift curve. As it closes, the intake valve will begin to open and then run through its lift curve. The sequence of valve events is exhaust opening (EO) followed by intake closing (IC). So if you forget, the engine will remind you. Now that you’ve got your valve lash procedure down, you’re ready to button up that engine, fire it up, and test out that new cam. So let’s get to it. SRL Source: Lunati, lunatipower.com

A Higher Level Of Transmission Quality & Performance Street Rodder Transmission Packages™ Lots of companies offer transmission packages, but none utilize the same standards for quality, performance and durability as TCI®. With over 45 years experience, TCI® includes a group of skilled craftsmen who build the industry’s best transmissions using superior internal components, the latest engineering advancements and modern, computerized testing equipment. features customized shift characteristics designed for street rods

• TCI® performance transmission packages include torque converter, trans cooler, dipstick & three gallons of Max Shift™ ATF

• Each TCI® component is Triple Tested for quality control assurance & backed by the best drivetrain tech support in the industry

Have A Unique Application?

Give us a call. TCI® will custom design & build the exact drivetrain package for your vehicle & usage.

Part #

Popular Transmission Applications

GM 311038P1

TH350 Street Rodder™ Package

371038P1

700R4 Street Rodder™ Package

371016P1

4L60E Street Rodder™ Package For LS Engines

271600P2

6x Six Speed™ Transmission Package For GM Engines

Ford 511638P1

C4 Pan Fill Street Rodder™ Package

TRANS HELP™ 1.888.776.9824 • TCIAUTO.COM

9574k

• Conventional & electronic transmissions available; each package

EXXXOTIC

INDUCTION I

nglese strives to give any street rod the look of classic induction combined with modern technology. Known in the performance aftermarket as “induction jewelers,” the Inglese team provides everything from fully customized, turnkey EFI or carbureted systems, to expert rebuild and tuning services, along with a full line of parts and accessories. Custom-matched paint, chrome finishes, and polish are available on all systems as well. Here you’ll find just a small sampling of Inglese’s remarkable craftsmanship.

’68 Camaro This 1968 Camaro is owned by Bruce Paul and utilizes a

fuel-injected, eight-stack system from Inglese on a 355c.i. small block. The black, low-profile fuel rails are included with each kit and sit between the throttle bodies for for an unobtrusive fit. 76

STREET ROD LIFE Vol. 1, No. 1

’67 Mustang

One of the more unique Mustangs in existence is equipped with Inglese induction. Dino Rossi owns this fuel injected, righthand drive ’67 coupe. Although they may seem simple, the snap-in filters that adorn the stacks are actually an award-winning product designed to keep out dust, dirt, and other debris.

STREETRODLIFE.COM

’34 Ford Roadster Dan Lettshek’s ’34 Ford Roadster is

equipped with a carbureted, eightstack induction system from Inglese. Note the chrome stacks and custom red paint to match the overall motif of the vehicle. The setup also includes Inglese’s durable black-wrinkle, die-cast aluminum valve covers — which are designed to be tall enough to accommodate aftermarket valvetrains.

STREET ROD LIFE Vol. 1, No. 1

’55 Chevy BelAir Mark Lopez brought his gorgeous

’55 Chevy BelAir hardtop to the Grand National Roadster Show featuring an Inglese eight-stack system utilizing FAST EZ-EFI on his Dart 400c.i. Chevy rated at 435 horsepower. The two-tone paint is tinted bronze and dark brown that really shimmered under the lights. Lopez also won the Stitch of Excellence award for the interior.

STREETRODLIFE.COM

SWAP

Making the

STREET ROD LIFE Vol. 1, No. 1

Thanks to advancements in technology, EFI is now easier than ever

t rings loud and clear that street rods are never finished. Owners are always looking for updates and new ways to improve the performance or appearance of their rod. Thanks to non-stop research and development, along with forward thinking upstarts and ingenuity, the hot rod market continues to provide new and exciting components that

deliver power, reliability, safety, and performance. One area of engine performance and driveability that has really evolved in the last few years is the acceptance and use of electronic fuel injection (EFI). Not that EFI is a new technology by any stretch in the OEM world, but the acceptance of the advanced electronicsas well as the longing for the driving benefits of EFI is higher than ever in the street rod world. This isn’t a passing fad or style within our industry. EFI swaps are growing by the demand of the enthusiast and there are many solutions available with self-learning throttle body kits and multi-port systems, and more. Many garage BS sessions have circled around the topic of the expense and labor to install fuel injection versus a well-tuned carburetor. It poses a great debate, but remember that many hot rodders today are not well versed in carb tweaking. Also take into consideration the fuel quality at the pumps these days, including additives that are not cooperating with carbs. Fuel injection systems can adapt to fuel variations and additives (to an extent) making them less susceptible to driveability issues. EFI can deliver increased economy, better starting, and will provide improved overall performance throughout most operating conditions and environments. One of the early turn-offs about swapping to EFI has always been about programming the system for a specific application. This used to mean the need to use complicated software and a computer to tune the system to meet the vehicle’s requirements and performance goals. When you add PC, software, and the ability to tune to the equation, you lose most of your do-it-yourself rodders and even a lot of shops. This isn’t much of an argument any more, as most of the bolt-on kits available today do not require a PC. Thanks to self-learning technology, all these kits need are a few simple details about your application to get started and running. The majority of carb-to-EFI systems on the market all incorporate a heated wide-band oxygen sensor (WB02). This sensor constantly monitors the exhaust gases and makes adjustments to the fuel delivery in order to achieve a targeted air/fuel ratio. That means the user STREETRODLIFE.COM

only needs to input a target air/fuel ratio and the ECU does the adjustments to achieve that goal rather than having to plot a complicated fuel map from a PC. When you’re planning an EFI installation, it is recommended to start with the WB02 sensor installation as this is the only part that requires welding. Generally, a plug is supplied so you can install the bung and plug the hole if you need to drive or use the car before completing the EFI installation. One of the leading companies in the carbto-EFI swap market is FAST, which developed the EZ-EFI Fuel throttle body system several years ago and has been converting rodders over to EFI in record numbers. The system incorporates a throttle body that mounts in place of a carburetor on most square-bore intakes and is nearly universal in their use on 4-, 6-, or 8-cylinder engines. The EZ-EFI Fuel throttle body requires only a few sensors, such as the coolant temp, manifold pressure, and throttle position, so the wiring of the system is kept as simple as possible. The kit is supplied with a wide-band 02 sensor and bung, which does require drilling and welding, but any exhaust shop could handle the small job of installing the bung.

STREET ROD LIFE Vol. 1, No. 1

No PC Required One of the most common barriers that kept enthusiasts from making the swap to electronic fuel injection was the programming. Just a few years ago, most EFI swaps required that the system be programmed through software and a PC, which put the intimidation level much higher for the doit-yourself rodder. Skip ahead to present time and two things have changed. First, the aftermarket has developed EFI systems that do not require any PC programming, and secondly, PCs are being replaced with tablets and smart phones, which are much more receptive to the masses and shops. FAST incorporates an easy to navigate color touchscreen programmer that will guide you through some simple car-guy questions about your en-

gine, such as the number of cylinders and cubic inches, cam type, idle rpm target, air/fuel ratio targets, and the type of fuel system being used to get the engine fired up. Once running, the self-learning technology takes over and constantly monitors and adjusts the fuel delivery to achieve the target values. No laptops or complicated software to sift through.

The other area that should be considered when moving to EFI is the fuel system. Since EFI systems require higher fuel pressure (average of 45 psi), a high pressure pump is required.

Not only the pump, but the filters and fittings all need to be up to the task. For the most part, an inline pump can be added under the vehicle but the ideal location is in the tank.

The next generation of throttle body injection systems from FAST, the EZ-EFI 2.0 Fuel + Ignition, can handle nearly twice as much horsepower as the original version (up to 1,200 hp).

An inline pump may be noisy and in high heat climates, the pump — and therefore the fuel — will run hotter. Also, if you plan to run a returnless (single line) fuel system, the pump must be mounted in the tank. Running an in-tank pump will cost a little more, but the pump will be quieter and run cooler.

When it comes to setting up your fuel delivery system, there are several options available to help make the upgrade as simple as possible — from dropin fuel pump assemblies, to new tanks built for EFI with internal pumps, and even sump systems that operate with an original mechanical pump. Whatever fuel solution is right for you,

the important point is that making the move to EFI on your rod is easier than ever. Think about it, your cruiser will start, idle, and run like your daily driver and won’t have that annoying over-rich fuel smell following you around after a day out cruising. SRL SOURCES: Aeromotive, aeromotiveinc.com; Edelbrock, edelbrock.com; FAST, fuelairsparktechnology.com; Rick’s Tanks, rickstanks.com; Tanks Inc., tanksinc.com

HYDRAULIC ROLLER & FLAT TAPPET CONFIGURATIONS

LUNATI® BOOTLEGGER CAMSHAFTS GIVE YOU THE MUSCLE FOR YOUR OUTLAW STREAK.

Small & Big Block Chevys & Ford Windsor engines Call For Chrysler & Other Ford Applications

This aggressive series of cams is designed for hot rodders who play by their own rules. It’s the most powerful series of street cams we’ve ever produced. Building on technology from the popular Voodoo® Series, these cams feature even faster opening rates, a controlled closing and far more area under the lift curve. With a 108˚ lobe separation angle and a 104˚ intake centerline, this extremely aggressive design provides tons of low- and mid-range power – perfect for back road adventures and stoplight-to-stoplight performance. When dyno-tested, Bootlegger Cams provide proven gains of up to 40 hp depending on the engine combination. Offering the perfect mash-up of today’s design advancements and old-school attitude, these are the perfect cams for harnessing your outlaw spirit.

DOWNLOADSTREETRODLIFE.COM THE APP! Availabble For iOS & Android

9540z

#BOOTLEGGER • BOOTLEGGERCAMS.COM • 662.892.1500

Fuel System Solutions With laptop-free EFI systems available, the once common issue of needing laptop tuning is no longer a major hurdle. Instead, the most popular question now comes in preparing the fuel system of your vehicle to support EFI. Remember, EFI systems require much higher fuel pressure making an electric fuel pump a necessity. Also, even though many of the EFI systems available are ‘returnless’ compatible (meaning only one line), most EFI companies recommend going with a return fuel system and an in-tank pump. This can present a challenge, but again, the aftermarket is coming up with solutions.

Aeromotive

Aeromotive’s Phantom Kit is nearly universal in its fit and function and can be done by most anyone in their garage with basic tools (you’ll need a 3.25-inch holesaw). The kit comes with everything you need including a new fuel pump, in-tank sock, the sump foam, and detailed installation instructions. The key is the billet aluminum hat that mounts to the top of the tank and secures the fuel pump surrounded by a foam fuel-cell like material. Installation was straight forward. We spent more time cleaning our tank than the entire assembly process when we made the move from a noisy (and failing) external pump to an in-tank model. At first turn of the key, we were amazed at how quiet the pump operation turned out to be.

The benefits of an in-tank pump are the reduced temperature of the pump and fuel, as well as a reduction of noise. Frame mounted external pumps generate a lot of noise and dropping the pump into the tank quiets things down immensely. We had an external pump on a Biscayne for several years and finally made the move to an intank. The lack of the fuel pump morning growl at stoplights made a huge difference in the day-to-day driving. There are several solutions available to help make the move to an in-tank pump easier these days. Each design serves its purpose and will help you make the swap.

Tanks

One of the advantages of having a popular car or truck is the availability of aftermarket parts such as the fuel tank. Tanks Inc. offers a number of their quality replacement fuel tanks in a design that is available with an internal electric fuel pump assembly. No drilling or cutting on your brand new tank — just bolt-in and flow! One cool aspect of these tanks is that the area where the fuel pump sending unit installs in the tank is recessed so the tank still fits properly, and the high pressure connections are accessible with the tank installed. For rods that are speed bump challenged, this is a big advantage plus the installation of the lines and wiring is much easier.

Edelbrock

Custom Tanks

If you’re building a unique rod that doesn’t have a replacement tank available, or you just want something custom built to your application, you may need to go with a handmade tank such as the stainless steel models from Rick’s Tanks. Need a tank with dual pickups for cornering and a pump that can support 1,500 horsepower? Rick’s Tanks has been there and done that.

STREET ROD LIFE Vol. 1, No. 1

Another alternative to adding high pressure fuel lines and modifying your rod’s fuel tank is with Edelbrock’s Universal Fuel Sump system. This unique sump system mounts under the hood and is fed fuel from the engine’s mechanical fuel pump. The sump has an internal high pressure fuel pump, regulator, and internal bypass to meet the high pressure demands of the EFI system. The only high pressure line runs from the sump to the throttle body or fuel rail. If you have room under the hood, this solution will save you a lot of time and hassle when making the jump to EFI, since you don’t need to run high pressure fuel lines to the tank. Also, this is an ideal solution for trucks or vehicles with dual fuel tanks.

Our goal at Street Rod Life is to deliver a publication — whether in print or online — with fun features, current news, and tech stories that will help you with your project. We believe being involved in the life that is street rods is a fun place to be, and welcome more people to get involved in the hobby. Being a car-person is almost a behavior with its own peculiar traits and customs. Chances are that many of your friends are likely car-folks. If you have kids or grandchildren, you’ve probably taken them to a car show, cruise, or race on more than one occasion. How many of you have planned a vacation that happened to be around a major car event — just by luck (wink-wink)? But it’s not all cars, all the time — though many significant others may disagree. We understand that cars are a hobby for most of us and there are many other things that are more important in our lives. Let’s face it, being able to mess around with cars is more of a privilege than a need. The nice thing about car-folks is that we’re also good at helping out where we can — from helping a friend tow his new project home, to volunteering, or helping in the community — which is exactly why we’re going to share with you a Street Rod Lifer of the Month with each issue. For our inaugural issue, we’d like to introduce you to David Sanchez of Clovis, New Mexico. We first met David, and his wife Jan, quite a few years ago on one of the Hot Rod Power Tours. They were cruising a ’62 Chevy wagon that drew attention thanks to its perfect stance and bright purple paint. Despite being smack in the middle of New Mexico they have made it through two complete Power Tours and several others for a few legs. That’s commitment. He also was a part of the Desert Cruisers car club and even a board member. David’s “non-car-guy” life is that of a school nurse at Mesa Elementary School. When he’s not patching up scrapes and taking care of sick students, you can find him in the garage, lending a hand with friends or helping with local events around Clovis. A few years ago, he helped build a truck bed into a lunch table that is now in the school cafeteria where students get to sit for special days. There’s also a large Ford front-end transformed into a 3D school bus and mural on the wall thanks to David. He’s also showing his 7-year old son Joaquin, and his friends, the car-guy ropes with frequent road trips to events in the southwest region in their ’60 Rambler wagon (on a 2002 Blazer chassis) or ’54 GMC. They still have the ’62 and Jan also drives a sweet little ’63 Falcon. Talk about a family of rodders. Congrats to David and his family and keep spreading the Street Rod Life.

David’s son Joaquin, rides shotgun to a number of events throughout the year, collecting Hot Wheels along the way.

The most recent project is a ’60 Rambler wagon.

Got someone to nominate for a Street Rod Lifer? Send us a note at tryden@xcelerationmedia.com explaining why you’re nominating them.

David Sanchez, our Street Rod Lifer of the Month poses with the truck bed he worked on and installed in the elementary school. To the left is the school bus mural he added. STREETRODLIFE.COM

ROD SHOTS

Moments that capture the true essence of the street rod life.

STREET ROD LIFE Vol. 1, No. 1

Finely

OILED Words Jeff Smith Photos Driven Oil, Jeff Smith

Parts store oil could leave your street rod at risk

t used to be simple. You fired up the ’32, woke the neighbors up on your way to the local auto parts store, purchased five quarts of oil and a filter, and that Saturday morning oil change party was quick and easy. But while your street rod is still the same hopped-up small block, nearly everything else in the performance world — including engine oil — has changed, and some not for the better. Several years ago, the American Petroleum Institute (API) made some serious changes to the oil lining the shelves at all the big chain auto parts stores. You may have heard about the API standards. For gasoline engines, the current standard is API SN, and each bottle of oil will carry a little API “donut” that states its current standard. 88

STREET ROD LIFE Vol. 1, No. 1

The reason this is important is because the standards have changed several times over the last 15 years and not all of them are good for older performance engines. The API will tell you that their testing confirms that the current API SN oil is completely compatible with older engines, including those equipped with flat tappets. But their testing is performed on older V6 engines equipped with flat tappet cams using relatively soft valve springs. The big issue for performance enthusiasts with these later generations of oil is the reduction of levels of zinc and phosphorous. These two materials are part of a compound called Zinc Dialkyl Dithiophosphate (ZDDP), and it is a very useful anti-wear additive.

If we go back nearly 20 years ago, a common standard engine oil package would have included roughly 1,200 to 1,500 parts per million (ppm) of ZDDP, a standard concentration for many years. But long-term durability testing on catalytic converters found that high concentrations of ZDDP compound in engine oil contributed to coating the insides of the converters with these additives, reducing the converter efficiency. The easy solution was to reduce the concentration of ZDDP in production oil down to 800 ppm, or roughly half of the previous concentration. Since very few (if any) current production engines use flat tappets, this wasn’t a serious concern. Current SN oil uses a newer, less-active version of ZDDP that has less im-

How dangerous are low ZDDP levels for a high performance camshaft? These concaved lifters are supposed to be slightly crowned, but reduced ZDDP levels contributed to their demise.

pact on catalytic converters, but the concentrations have remained low. The issue for performance enthusiasts is the durability of high performance flat tappet cam engines using API designation SJ, SL, SM, or SN oil. Sliding type flat tappet lifters create friction — especially when the camshaft and lifters are new — and it’s the higher levels of ZDDP that protect these lifters from failure. Stock engines with stock spring loads can continue to use current SN oil with no problem, but performance engines are a different issue.

Performance camshafts generally produce much higher lifter acceleration rates than stock camshafts. This is how the cam designers are able to increase valve lift, while keeping the duration reasonable for street engines. These higher acceleration rates demand a more aggressive valve spring to maintain control of the valve at higher engine speeds. Plus increased opening rates reduce the contact area of the lifter to the cam lobe. All of these performance camshaft design requirements contribute to increasing the load on that contact patch between the lifter and the cam lobe. What our street engines need is oil with higher concentrations of ZDDP to protect the cam and lifters from wear. A few years ago, the quick answer was to use oil intended for diesel engines that still utilized higher ZDDP concentrations. But that solution is no longer valid, because diesel oil has also recently been subjected to similar ZDDP reductions. The real solution is performance street engine oil that increases the ZDDP concentrations to the 1,200 to 1,500 ppm levels that will protect older engines. There are race oils that do this job, but they are intended to be used in racing applications and generally are blended with lower levels of detergents that are necessary for street engines. One company that has addressed this specific hot rod need is Driven Racing Oil. Among the different formulations that Driven offers, the Hot Rod 10W30, 10W-40, and 15W-50 versions are the ones that are best suited for a street-driven vehicle. These are mineral-based oils that are specially blended for increased protection when the engine is stored to minimize oxidation.

This is especially important because acids form in the oil as a result of normal combustion, and the additive package in Driven’s HR oil is specially blended to counteract the corrosive nature of these acids. This is helpful for engines that are only driven for short runs where the engine oil may not achieve sufficient temperature to boil off accumulated acids. Driven’s HR oil is also available in a full synthetic as well. The ZDDP protection levels are actually slightly better with the synthetic, because the base oil package is greatly improved over nearly all other synthetics. Driven’s HR synthetic mPAO base oil package is exactly the same as all of Driven’s race oils (the same oil used in NASCAR racing). mPAO is a next-generation synthetic based oil that features a higher viscosity index, which allows for the formulation of multi-grade motor oils that are less dependent on traditional viscosity index improver additives. The synthetics are more expensive, but if you’ve invested $10,000 in a killer street engine, Driven’s HR synthetic is certainly among the best street oil you can buy. There’s much more to the story about engine oil than just ZDDP and wear rate protection, as we’ve only touched on viscosity selection, but in this case you don’t need to be a lubrication expert on the subject. All you need to know is that there are far better oils out there than the stuff on the shelf at the local auto parts store for your street rod. The question becomes whether all this information is motivation to do something before that cam goes flat. We’ll leave that call up to you. SRL Source: Driven Racing Oil, drivenracingoil.com

STREETRODLIFE.COM

T-bu

21 st CENTURY

Detroit Speedcraft brings confidence, contemporary egonomics to classic ride 90

STREET ROD LIFE Vol. 1, No. 1

ucket Words/Photos Barry Kluczyk

-buckets are traditional hot rods. And as anyone who’s lived with one for any length of time will likely attest, they’re typically known for their marginal driving experience — especially once you put a little power to them. Poor designs that yielded less than desirable ride and handling characteristics, combined with a relatively high center of Story and photos by Barry Kluczyk

gravity, with that traditional “cartoon-character” seating position, were the norm in the mid ’60s and early ’70s. In an age of uncompromising factory performance sedans that deliver Autobahn-blistering performance, the not-soquaint compromises of the traditional T-bucket can be hard to accept, even for short cruises.

That’s where Detroit Speedcraft comes in. The Motor City-based street rod startup company developed a T-bucket-style hot rod that is engineered to perform with the directness and confidence of a contemporary car. “The Detroit Speedcraft platform is an engineered system with a wide array of components that are designed to work together to deliver excellent ride, handling, braking and steering dynamics,” explains co-founder Tom Kuhr. “In designing our front and rear suspensions, steering, and ergonomic package — radius rods, ladder bars, steering linkage, steering column angle, seat angle, etc. — function drove the design, not appearance. “We do not have bump steer, axle hop, ride, drive, or braking response that is unpredictable or uncomfortable. All suspension hard points, bushings, spring and shock rates, suspension articulation swings, were carefully designed and engineered together to make a happy car.” A unique, Speedcraft-designed and built dual kick-up frame is the figurative and literal foundation for the company’s cars. It not only enables the confident, predictable handling characteristics, but delivers optimal ergonomics. There is also a decidedly modern axle location and suspension geometry that give the car its rock-solid handling. Using a dual kick-up frame design, the body is mounted on top of the frame rails without the body being channeled over the frame. That frees up more space and allows a significantly lower seating position in the body than other traditional T-buckets. The seating position is designed with a comfortable angle so it feels like the car you drive daily. 92

STREET ROD LIFE Vol. 1, No. 1

The right amount of foot space area is possible with the incorporation of a contoured speed blister on the driver’s side of the body (also available as an option for the passenger side). That allows the pedals to be positioned with the correct side-to-side spacing and step-over. The steering comes at you through the dashboard, like a normal car, and not through the floor like an antique bus. “T-buckets and proper ergonomics have never been used in the same sentence, much less designed into a vehicle such as a T-bucket,” says Kuhr. “We have invested considerable time and effort in our car’s feel and function. Most T-buckets have very odd pedals, seating, and steering arrangements that require re-learning and new instincts in order to drive the vehicle. In a panic situation, such a lack of proper ergonomic design could be dangerous.” The brains behind the unique frame, suspension, and optimal interior design

is Dave Nedock, president and chief engineer for Detroit Speedcraft. Retired from Ford Motor Company, Nedock spent his 27-year career as a hands-on design engineer and project manager on vehicles including the Mustang. His design expertise includes, systems integration, chassis systems, suspension, brakes, steering, powertrain, and ride and handling. He also raced a multitude of vehicles over the past 30 years, from quick door slammers to blown altereds and alcohol funny cars. In short, Nedock is a guy who knows the importance of confidence and stability in a high-powered vehicle. “It’s not fun to drive something that feels unbalanced or unsteady at speed,” he says. “When you feel the car is capable and confident, you really enjoy the experience — and it’s so much more fun to explore the car’s performance capability.”

Y T L A I C E SP ONLINE TOOLS

Day Or Night a better driving position and comfort, dual-contoured speed blisters that create more foot space for the driver and passenger, and a steering column with a steel cross-car beam for extra rigidity, strength, and steering response. Of course, it’s hard to put a number on the fun factor — and in that regard, Detroit Speedcraft cars might be the street rod value of the decade. They’ve revamped the T-bucket into a relevant, confident, and thoroughly road-worthy modern street rod. No more compromises. SRL

Browse hundreds of professional quality, problem solving tools for racers & engine builders.

• Top Quality & Hard-To Find Tools • Safe & Secure Online Ordering • Daily Product & Shipping Specials • Fast Delivery To Your Doorstep

9549k

We can attest to his qualifications and eye for detail, having driven one of the Detroit Speedcraft cars fast enough to realize its handling, composure on bumps, and stopping traits, all were spot-on. These sentiments were echoed by customer Blake Bandusky, from Lombard, Illinois, who says of his Speedcraft T-bucket: “The headline here is the handling. Zero, I mean zero bump steer. Your suspension tracks absolutely straight over bumps and potholes. The steering for being non-assisted is light and nimble. “Many vehicles like this are fast, and many look good. There are very few that handle this well, and fewer still that combine handling, speed and good looks.” Like many hot rod kit vehicles, the Detroit Speedcraft cars are all about individuality and personalization. For turn-key cars, they’ll do just about anything you ask and power the cars with just about any power plant. Most have been small-block Chevy-powered, but they’ve done LS- and Ford-powered cars as well. When it comes to their kits, the Speedcraft cars are more complete than most on the market. “Many kits are a collection of parts that are thrown together to make a package, but require a lot of special fitting and welding,” says Kuhr. “In many cases the components in the kit were never designed to work together and pretty much don’t.” Indeed, a Detroit Speedcraft kit at first glance may seem more expensive, but it’s very thorough and complete in its parts list, including the fuel tank and mounting hardware, radiator, windshield, complete brake system, complete steering system, interior kit, battery mount, pedals, seats and seat risers, complete rear axle, seat belt mountings, headers, and more. A ballpark figure for a kit which includes a full chassis and body package starts at $15,900, with no engine or trans. A turn-key car, delivered and ready to rumble, starts at $26,900. That’s a pretty good value in our book, considering the demonstrated capability of the car and its build quality. Detroit Speedcraft has also been proactive with YouTube-based videos that help with the assembly process for DIYers. This effort has pushed the completion rate for their kits to nearly 100-percent. They’re also continually refining their products, including the recent introduction of a new 23T-X body, which features a 3-inch addition to the cowl for

POWERHOUSEPRODUCTS.COM

SCHEDULES EVENTS PLACES

HIT THE ROAD It’s a great time to be a street rodder! There have never been so many events, races, and avenues to attend . . . even as a spectator. Whether you’re into car shows, driving events, tours, or racing, there is something nearly every weekend. Here’s a few upcoming events to put on your calendar. If you have anything you want to tell us about — let us know at: tryden@xcelerationmedia.com

Goodguys Rod and Custom Association

We previewed the Goodguys 2015 on page 32, but here’s the schedule through May. The April 17–19 stop in Raleigh, North Carolina, is a new event on the schedule and we know the Tar Heel state has to be excited. We’ll post more dates in the next issue of Street Rod Life. good-guys.com

March 20–22

5th Spring Lonestar Nationals Texas Motor Speedway Fort Worth, Texas

March 28–29

All American Get-Together Alameda County Fairgrounds Pleasanton, California

Street Machine Nationals

The Street Machine Nationals offers up a huge gathering of street machines, hot rods, muscle cars, rods, and more. The events are open to all years, makes, and models that are powered with American iron. Participants get to display their rods, compete in events, compete for awards, and hang out with our editors!

streetmachinenationals.net

March 14–15

July 17–19

June 26–28

Sept 25–26

Street Machine and Muscle Car Nationals Pomona, California Du Quoin Street Machine Nationals Du Quoin, Illinois

Street Machine Nationals St. Paul, Minnesota Springfield Fall Nationals Springfield, Missouri

April 10–12

15th Del Mar Nationals Del Mar Fairgrounds Del Mar, California

April 17–19

1st North Carolina Nationals North Carolina State Fairgrounds Raleigh, North Carolina

April 24–26

2nd Florida Nationals Osceola Heritage Park Kissimmee, Florida

May 15–17

10th Nashville Nationals LP Field (Tennessee Titan Stadium) Nashville, Tennessee

May 30–31

22nd Summer Get-Together Alameda County Fairgrounds Pleasanton, California

STREET ROD LIFE Vol. 1, No. 1

Sloan Museum Auto Fair

This show features an eclectic mix of muscle cars, hot rods, and vintage race cars with an emphasis on Buick history, since the show is smack in the heart of what used to be Buick City. All years, makes, models, and descriptions are welcome so you will see every kind of car and truck you can imagine.

sloanautofair.com

June 27–28

Flint, Michigan

Back to the Fifties

Thousands of street rodders take to the Minnesota State Fairgrounds for a weekend celebration of hot rods and fun at this staple event for the northern region.

msrabacktothe50s.com

June 19–21

Minnesota State Fairgrounds St. Paul, Minnesota

National Street Rod Association

The NSRA produces 10 great events in 2015 welcoming all 1985 and older vehicles to take part in the weekend festivities. Has your rod been through the NSRA safety inspection? Now’s your chance.

nsra-usa.com

April 10–12, 2015

State Fair Park Oklahoma City, Oklahoma

April 24–26, 2015

Kern County Fairgrounds Bakersfield, California

May 1–3, 2015

Chilhowee Park & Exposition Center Knoxville, Tennessee

May 22–24, 2015

Ozark Empire Fairgrounds Springfield, Missouri

June 5–7, 2015

York Expo Center York, Pennsylvania

June 26–28, 2015

Colorado State Fairgrounds Pueblo, Colorado

August 6–9, 2015

Kentucky Exposition Center Louisville, Kentucky

Lonestar Round Up The Lonestar Round Up is a huge Austin, Texas, outdoor car show and live music festival featuring vintage hot rods and custom cars that drive from all over the country as an annual pilgrimage for pre-’64 rodders.

lonestarroundup.com

April 17–19

Travis County Expo Center Austin, Texas

HOT ROD Power Tour

The 21st running of the HOT ROD Power Tour takes place June 6–12 with a run from Madison, Wisconsin to Baton Rouge, Louisiana. Pack up the family, some tools, and the dog for a week of horsepower fun!

hotrod.com

Saturday, June 6

Alliant Energy Center Madison, Wisconsin

Sunday, June 7

Parkland College Champaign, Illinois

Monday, June 8

Gateway Motorsports Park Madison, Illinois

Tuesday, June 9

Memphis International Raceway Memphis, Tennessee

Wednesday, June 10

Hoover Metropolitan Stadium Hoover, Alabama (near Birmingham)

Thursday, June 11

Surprise! Location coming soon

Friday, June 12

Lamar Dixon Expo Center Gonzales, Louisana (near Baton Rouge)

Pomona Swap Meet

If you can’t find it at the Pomona Swap Meet, held at the Fairplex, maybe you just don’t need it. If you’re looking for an adventure, fly out with a pal, bring a wad of cash, and road trip home in a rust-free project of some sort! Sunday, April 19 Sunday, June 7 Sunday, Aug 9th

pomonaswapmeet.com

Pomona, California STREETRODLIFE.COM

Behind THE DOOR

Bill paid $100 for his first car, a ’57 Chevy two-door sedan. That first one is long gone, but this LS-powered shoebox fills the void.

This ’57 has been with Bill for over 20 years and back in the late ’60s it was raced by his good friend Mike Griffin. See more on this one at StreetRodLife.com.

Out of over 100 Chevrolets that Bill has owned, this is his first Chevelle! The ’67 has a built LS with a 6-speed trans, CPP suspension and brakes, Vintage Air, and paint by Street Toys of Juarez, Mexico.

STREET ROD LIFE Vol. 1, No. 1

Ever wonder what’s happening behind a garage door? We were able to roll up the door on Bill Avilla’s shop to see what the long-time El Paso, Texas, hot rodder was working on. Bill’s owned well over 150 cars (with 75 being Corvettes) and has done it all from drag racing to off-roading, slalom, rods, and more, with nearly everything wearing a bowtie save for a few Pontiacs and Olds. He’s got more than a few cool rides in his shop and we salute him as a street rod lifer!

Don’t Drive Until You’ve DRIVEN LONG PERIODS OF STORAGE CAN DAMAGE OIL & FUEL SYSTEMS.

Street rods make their own rules. They stand apart in age, performance, and seasonal enjoyment and these unique features demand qualities that today’s fuels and lubricants simply do not possess. Putting “the motor ahead of the molecule,” Driven Racing Oil has specifically formulated products that street rodders can count on to protect their cherished machines. The Zinc-fortified Driven Hot Rod Oil and system-cleansing Driven Carb Defender fuel additive were both specially developed for street rods and older engines.

HR HOT ROD MOTOR OIL

Modern engines and oils have done a great job of reducing emissions and protecting sensitive emissions equipment. However, these reduced emissions come at the expense of traditional wear additives like Zinc Dialkyldithiophosphate (ZDDP) in modern oils. Simply put, you shouldn’t use modern oils in older style engines. Driven Hot Rod Oil is specifically formulated with high levels of ZDDP to protect older engines. Since many of them are not driven daily, Hot Rod Oil has also added unique military-spec rust and corrosion inhibitors to prevent dry starting and corrosion caused during storage. Driven Hot Rod Oil meets the latest SAE J300 Cold Cranking requirements and passed a rigorous 1000-hour severe storage simulation test with NO signs of rust or corrosion. Reduced cold start wear means longer engine life.

• Zinc additives

• Storage protection

• Dry start prevention

CARB DEFENDER FUEL ADDITIVE

The growing trend of using Ethanol to bring lower-rated fuels to a higher octane creates problems even under regular usage. Lower octane hydrocarbons are typically less stable and more likely to varnish. Added Ethanol not only absorbs water by nature, it’s chemically corrosive to carburetor metals like Aluminum and Zinc. Independently tested, Driven Carb Defender was proven to outperform national leading additive brands in cleaning and preventing deposits, inhibiting fuel system corrosion, and stabilizing fuel, all without changing the properties of the fuel. Whether in use or in storage, Driven’s Carb Defender’s cleans, protects, and stabilizes like no other. It restores performance, extends engine life, and eliminates costly repairs - and that means more miles of fun. • E85 corrosion prevention

• Eliminates deposits

• Fuel stabilizer

Corrosion Test Results* Driven Stabil SeaFoam Startron *Not ASTM verified. Testing was conducted by an independant lab using steel.

9576k

VISIT OUR WEBSITE TO LEARN MORE ABOUT PROTECTING YOUR HOT ROD.

1.866.611.1820 | DRIVENRACINGOIL.COM

Join Us:

#DRIVENTOWIN

The asphalt jungle is a noisy place. Make sure you’re heard. The streets are full of commotion and it’s easy to get run over unless you make some noise. The hard-hitting Thumpr™ Series from COMP Cams® will give your hot rod or street machine an aggressive note that lets them know you mean business. More than all bark and no bite, they were specifically designed to create impressive horsepower gains and broad torque curves while maintaining streetability. From mild to wild, Thumpr™ offers three levels of thump to suit any engine: Thumpr™, Mutha Thumpr™, and the Big Mutha Thumpr™. Though nostalgic-sounding in note, the designs are compatible with the latest in valve train advances, including COMP® Beehive™ Valve Springs, Ultra Pro Magnum™ Roller Rockers, and Magnum Pushrods. EFI-compatible versions are also available. You choose the engine, Thumpr® will make it roar.

Spintron® and dyno tested Available for both carb and EFI Retro-fit hydraulic roller and hydraulic flat tappet versions GM - Ford - Chrysler - even Ford flathead and Buick nailhead

9573j

Choose one of four levels of component-matched kits, including the all-inclusive K-Kit for a complete, trouble-free installation. Complete K-Kits include a camshaft, lifters, springs, timing chain set, valve stem seals, retainers, locks and assembly lube.

COMPCAMS.COM

CAM HELP ® 1.800.999.0853