TECHNICAL PRODUCTION PACK
XIMENA CARLOTA GUIJARRO POINCOT
OUTFIT 1-GARMENT 1 FRONT VIEW
BACK VIEW
CHEST LINE
CHEST LINE
WAIST LINE
WAIST LINE
HIP LINE
HIP LINE
KNEE LINE
KNEE LINE
OUTFIT 1-GARMENT 2 FRONT VIEW
BACK VIEW
CHEST LINE
CHEST LINE
WAIST LINE
WAIST LINE
HIP LINE
HIP LINE
KNEE LINE
KNEE LINE
OUTFIT 2-GARMENT 1 FRONT VIEW
BACK VIEW
CHEST LINE
CHEST LINE
WAIST LINE
WAIST LINE
HIP LINE
HIP LINE
KNEE LINE
KNEE LINE
OUTFIT 2-GARMENT 2 FRONT VIEW
BACK VIEW
CHEST LINE
CHEST LINE
WAIST LINE
WAIST LINE
HIP LINE
HIP LINE
KNEE LINE
KNEE LINE
OUTFIT 3-GARMENT 1 FRONT VIEW
BACK VIEW
CHEST LINE
CHEST LINE
WAIST LINE
WAIST LINE
HIP LINE
HIP LINE
KNEE LINE
KNEE LINE
OUTFIT 3-GARMENT 2 FRONT VIEW
BACK VIEW
CHEST LINE
CHEST LINE
WAIST LINE
WAIST LINE
HIP LINE
HIP LINE
KNEE LINE
KNEE LINE
OUTFIT 4-GARMENT 1 FRONT VIEW
BACK VIEW
CHEST LINE
CHEST LINE
WAIST LINE
WAIST LINE
HIP LINE
HIP LINE
KNEE LINE
KNEE LINE
OUTFIT 4-GARMENT 2 FRONT VIEW
BACK VIEW
CHEST LINE
CHEST LINE
WAIST LINE
WAIST LINE
HIP LINE
HIP LINE
KNEE LINE
KNEE LINE
OUTFIT 4-GARMENT 3 FRONT VIEW
BACK VIEW
CHEST LINE
CHEST LINE
WAIST LINE
WAIST LINE
HIP LINE
HIP LINE
KNEE LINE
KNEE LINE
OUTFIT 5-GARMENT 1 FRONT VIEW
BACK VIEW
CHEST LINE
CHEST LINE
WAIST LINE
WAIST LINE
HIP LINE
HIP LINE
KNEE LINE
KNEE LINE
OUTFIT 6-GARMENT 1 FRONT VIEW
BACK VIEW
CHEST LINE
CHEST LINE
WAIST LINE
WAIST LINE
HIP LINE
HIP LINE
KNEE LINE
KNEE LINE
OUTFIT 6-GARMENT 2 FRONT VIEW
BACK VIEW
CHEST LINE
CHEST LINE
WAIST LINE
WAIST LINE
HIP LINE
HIP LINE
SIDE VIEW
CHEST LINE
GATHERED SIDE
GATHERED SLEEVE
OUTFIT 1-GARMENT 1
GATHERED SIDE
GATHERED SLEEVE
OUTFIT 1-GARMENT 2 90 DEGREE ANGLE ON SHOULDER
WEBBING STRAP WITH D-RINGS
WEBBING STRAP WITH D-RINGS PIPING
OUTFIT 1-GARMENT 2 90 DEGREE ANGLE ON SHOULDER
WEBBING STRAP WITH D-RINGS
WEBBING STRAP WITH D-RINGS PIPING
ANGLED FRONT DIPPED BACK OFF THE SHOULDER PANELLED SLEEVE
OFF THE SHOULDER PANELLED SLEEVE
PANELLED BODY
OUTFIT 2-GARMENT 1 ANGLED FRONT DIPPED BACK OFF THE SHOULDER PANELLED SLEEVE
OFF THE SHOULDER PANELLED SLEEVE
PANELLED BODY
WEBBING STRAP WITH D-RINGS
PIPING
PIPING
LEATHERETTE EXTENSION
OUTFIT 2-GARMENT 2 WEBBING STRAP WITH D-RINGS
PIPING
PIPING
LEATHERETTE EXTENSION
WEBBING STRAP WITH D-RINGS LEATHERETTE EXTENSION
PIPING
OUTFIT 3-GARMENT 1 WEBBING STRAP WITH D-RINGS LEATHERETTE EXTENSION
PIPING
OUTFIT 3-GARMENT 2
HIGH WAISTED
SHORT REVERSE V BACK
INVISABLE ZIP
OUTFIT 3-GARMENT 2
HIGH WAISTED
SHORT REVERSE V BACK
INVISABLE ZIP
WEBBING STRAP WITH D-RINGS
OUTFIT 4-GARMENT 1
WEBBING STRAP WITH D-RINGS
HIGH WAISTED
INVISABLE ZIP
STRUCTURED PANEL
OUTFIT 4-GARMENT 2
HIGH WAISTED
STRUCTURED PANEL
INVISABLE ZIP
OVERSIZED COLLAR
BIAS BINDING
OUTFIT 4-GARMENT 3
OVERSIZED COLLAR
BIAS BINDING
OUTFIT 5-GARMENT 1 WEBBING STRAP WITH D-RINGS
PIPING
STRUCTURED PANEL
OUTFIT 5-GARMENT 1 WEBBING STRAP WITH D-RINGS
PIPING
STRUCTURED PANEL
OUTFIT 6-GARMENT 1
WEBBING STRAP WITH D-RINGS
PIPING
GATHERED PANELS
OUTFIT 6-GARMENT 1
WEBBING STRAP WITH D-RINGS
PIPING
GATHERED PANELS
PIPING
STRUCTURED BACK
PIPING
OUTFIT 6-GARMENT 2
PIPING
STRUCTURED BACK
PIPING
OUTFIT 1-GARMENT 1 MEASUREMENTS
OUTFIT 1-GARMENT 2 MEASUREMENTS
OUTFIT 2-GARMENT 1 MEASUREMENTS
OUTFIT 2-GARMENT 2 MEASUREMENTS
OUTFIT 3-GARMENT 1 MEASUREMENTS
OUTFIT 3-GARMENT 2 MEASUREMENTS
OUTFIT 4-GARMENT 1, 2, 3
11cm
37cm
cm
40cm
cm 26
cm
23
40cm
cm
cm
22
22
cm
23
26
37cm
11cm
MEASUREMENTS
OUTFIT 5-GARMENT 1 MEASUREMENTS
OUTFIT 6-GARMENT 1 MEASUREMENTS
OUTFIT 6-GARMENT 2 MEASUREMENTS
OUTFIT 6-GARMENT 1 LAYPLAN FABRIC A - 130CM X 55CM FABRIC A - 70CM X 42CM 1 2 4
3
130cm
FOLD
SELVEDGES
KEY 1.TOP FACING - CUT A PAIR 2.BOTTOM FACVING - CUT A PAIR 3.FRONT PANEL - CUT A PAIR 4.BACK PANEL - CUT A PAIR 5.BODICE PANEL FRONT - CUT ONE 6.BODICE PANEL FRONT- CUT ONE 7.BODICE PANEL FRONT- CUT ONE 8.BODICE PANEL FRONT- CUT ONE 9.BODICE PANEL BACK- CUT ONE 10.BODICE PANEL BACK- CUT ONE 11.BODICE PANEL BACK- CUT ONE 12.BODICE PANEL BACK- CUT ONE
55cm
10
5
7 6
11
8 9
INCLUDING 1 CM SEAM ALLOWANCE
70cm
12 42cm
OUTFIT 6-GARMENT 1 LAYPLAN
FABRIC B KEY 13.MIDDLE
TROUSER PANEL - CUT A PAIR
13
FABRIC C BINDING - CUT 1.5M
14 FOLD
SELVEDGES
16 15 50cm
20cm
50cm
WORTH 15.BODICE PANEL FRONT CUT ONE 16.BODICE PANEL BACK - CUT ONE
153cm
KEY 14.BIAS
OUTFIT 6-GARMENT 1 METHOD AND ORDER OF MANUFACTURE 1. Fabric preparation: Cut out all the fabrics according to the pattern pieces. Ensure that all notches are snipped and match appropriately. Cut out 1.5 meters worth of strips on the bias in Fabric C. Attach each end of the strip to the next to create a long piece of bias binding of the piping.
2. Construction of bodice: Front bodice: Overlock piping onto the right hand side (one facing the fabric) of panels 5, 15 6 & 7. Attach panels 5 and 6 together. Do the same for panels 7 and 8. Then attach them to the remaining panel (15) ensuring that all notches match. Back Bodice: Repeat the same steps as front bodice but with the corresponding numbered patterns. Once all the panels have been stitched together to create a front and a back, place them right sides together and attach the sides to create the bodice.
3. Construction of facings: Place one layer of each facing right sides together and attach the sides together. Place the remaining layers right sides together and attach one side. Place both bottoms of the facings, right sides together, ensuring that the side seams match, and stitch together.
4. Attaching facing to bodice: Place facing over the bodice (right sides together). Place webbed straps in between the facing and the bodice 10cm away from the centre front. Overlock the seams together and turn the facing inside. Press. Insert elastic (measured to the appropriate bust size) and attach the unseamed side of the facing.
5. Construction of trousers: Place elastic on both sides of panel 13. Zig-Zag stitch the elastic down whilst pulling on it to create the gathers. Repeat on the other panel. Place panel 13 right side onto panels 3 & 4; overlock down the seams to create one leg. Repeat for the other side. Match both legs and overlock down the crotch like and back.
6. Attaching bodice to trousers: Place the bodice inside out on top of with the right sides together, making tre front seams of the trousers match front notches of the bodice. Overlock to attach both pieces.
the trousers sure the cenwith the centre the waist seam
7. Finishings: Top-stitch the facing on to the bodice to keep in place. Roll in the hems by 1cm and press. Coverstitch the hem ensuring to change the coverstitch thread to match each panel. Press the garment to remove any creases or imperfections
SCUBA
JERSEY
GOLDFINGER -LAME
ELASTIC
WEBBING STRAPS
D-RING
FABWORKS
CROFTMILL
LAU FASHION
SAMUEL TAYLORS
SAMUEL TAYLORS
DESCRIPTION
FABWORKS
SUPPLIER REFERENCE
0.5M
20 M
-
-
-
0.72M
WIDTH/SIZE
2
1M
6.41M
050M
1.53M
1.30M
QUANTITY
GARMENT COSTINGS
OUTFIT 6-GARMENT 1
£1.80
£0.90
£0.96
£3.75
£7.50
£7.80
TOTAL COST
110% MARKUP = WHOLE- £209.64 SALE SELLING PRICE 250% MARK-UP (FROM £524.10 WSP) = RETAIL SELLING PRICE
5% OF FABRIC AND TRIM £1,14 = WASTAGE MANUFACTURE AND DE- £70 LIVERY C.M.T. (CUT, MAKE AND TRIM) BASIC COST OF GARMENT £93.84
TOTAL FABRIC AND TRIM £22.71
£1.80 (PER PAIR)
£0.90
£0.15
£7.50
£5
£6
PRICE PER UNIT/ MTR
OUTFIT 6-GARMENT 1 FABRICS
FABRIC A - SCUBA, FABWORKS
FABRIC B - JERSEY, FABWORKS
FABRIC C - GOLDFINGER LAME, FABWORKS
ADDITIONAL ELEMENTS ELASTIC, LAU SHOP
D-RINGS, SAMUEL TAYLORS
WEBBING RIBBON, SAMUEL TAYLORS