Yamaha Off-Road Motorcycle Accessories, 2025 by Yamaha Motor Corporation, USA.

2025 OFF-ROAD MOTORCYCLE ACCESSORIES

LOCATED IN SEPERATE FILE:

24_0263-Off-Road

MCY Catalog 2025_cover

When your Yamaha needs scheduled service, maintenance, repair, or that perfect accessory, nothing can replace Yamaha Genuine Parts & Accessories. Genuine parts are just that, the same high-quality parts originally specified by the engineers for your Yamaha. What’s more, Yamaha Accessory engineers work hand-in-hand with the same team of engineers that designed your Yamaha to develop Yamaha Genuine Accessories.

Making your vehicle look and perform as only a Yamaha can takes advanced research and the use of state-of-the-art materials. But that’s not all. By continually subjecting these parts and accessories to a demanding testing program designed to evaluate functionality and durability, we give you peace of mind – no need to worry about inferior aftermarket parts.

Yamaha Genuine Accessories always deliver the highest fit, finish, and style, while Yamaha Genuine Parts provide the same true quality and performance as the original part that was on your Yamaha, every time.

Whether in the dirt, on the road, through the snow, or over the water… Don’t Expect It, Demand It!®

GYTR®. Four letters that spell high performance.

Genuine Yamaha Technology Racing accessories are an exclusive line of premium high performance products designed specifically for your Yamaha, developed by Yamaha’s expert engineers, then rigorously tested to ensure the same quality and durability you expect from Yamaha. The result is a line of accessory options with superior performance, fit, and OEM quality, all backed by a factory limited warranty.*

Motocross & Cross Country

BHR-E41C0-V0-00

GYTR® BILLET CLUTCH COVER BHR-E54E0-V0-00

GYTR® BILLET IGNITION COVER BHR-E54G0-V0-00

BHR-F21E0-V1-00

GYTR® HYDRAULIC CLUTCH KIT

BHR-F63A0-V0-00

BHR-E24C0-V0-00

GYTR® RADIATOR BRACES

Performance / Protection

GYTR® HYDRAULIC CLUTCH KIT

The GYTR Hydraulic Clutch Kit is specially tuned to optimize disengagement zone, decrease lever load and minimize maintenance. Self-adjusts to clutch heat and wear in all conditions to eliminate the need for manual clutch lever adjustment. Kit includes a high-quality 22-position adjustable Brembo® master cylinder, a braided hydraulic line, and a hard anodized billet slave cylinder. Simple bolt-on installation (no need to modify engine cases).

Fits ’23-’25 YZ450F; ’24-’25 YZ450FX; ’24-’25 WR450F

BHR-F63A0-V0-00

GYTR® HIGH-COMPRESSION PISTON KIT

Developed with racers in mind that run AMA®-approved fuels, the GYTR High-Compression Piston Kit boosts performance across the entire rpm range while maintaining impressive GYTR durability standards. Features an ultra-strong forged bridged-box design and a low-friction, two-ring design. Comes with a DLCcoated wrist pin. VP Racing® T4 or MR Pro 6® fuel is recommended. IMPORTANT: The 2018 model YZ450F requires installation of an NGK® CR8E spark plug (CR8-E0000-00-00).

This accessory is restricted to closed-course competition use.

Fits ’20-’22 YZ450F

B2W-E16A0-V0-00

Fits ’14-’19 YZ450F 1SL-E16A0-V0-00

GYTR® PERFORMANCE HIGH-FLOW AIR FILTER

GYTR Performance High-Flow Air Filter maximizes airflow while maintaining exceptional filtration with a completely washable and reusable foam element. Features a two-stage foam construction, wielded foam junction, and grommets come included. For optimized performance, please service with Yamalube Foam Filter Oil (ACC-FOAMF-LT-ER), sold separately. This accessory is restricted to closed-course competition use.

Fits ’23-’25 YZ450F; ’24-’25 YZ450FX; ‘ 24-’25 WR450F

BHR-E41C0-V0-00

Fits ’18-’22 YZ450F; ’19-’23 WR450F

BR9-E41C0-V0-00

Fits ’14-’17 YZ450F; ’16-’18 YZ450FX; ’16-’18 WR450F 1SL-E41C0-V0-00

NEW! GYTR® BILLET RADIATOR GUARDS

The CNC-machined, billet aluminum GYTR Billet Radiator Guards are designed to protect the radiators from front and side impacts and core punctures. Scratch-resistant hard anodized finish and lightweight diamond pattern looks great while maximizing airflow and strength.

Fits ’23-’25 YZ450F; ’24-’25 YZ450FX; ‘24-’25 WR450F BNL-E24D0-V0-00

GYTR® BILLET IGNITION COVER

The GYTR Billet Ignition Cover is engineered with a 6061 billet aluminum that offers an exceptional level of strength and protection with a slimmer profile that is 8 mm slimmer than OE. Developed in conjunction with race teams, both timing plugs have been removed to create a simple more compact design that is less prone to damage with a scratch-resistant, hard-anodized finish.

Fits ’23-’25 YZ450F; ’24-’25 YZ450FX; ’24-’25 WR450F

BHR-E54G0-V0-00

Fits ’18-’22 YZ450F; ’19-’23 WR450F

BR9-E54G0-V0-00

GYTR® BILLET CLUTCH COVER

The GYTR Clutch Cover is engineered to offer exceptional strength and protection. Made from a 6062 billet aluminum that offers exceptional impact durability, is scratch-resistant, with a hard-anodized finish, and features a machined GYTR logo.

Fits ’23-’25 YZ450F; ’24-’25 YZ450FX; ’24-’25 WR450F

BHR-E54E0-V0-00

Fits ‘10-’22 YZ450F; ’16-’23 YZ450FX; ’16-’23 WR450F

33D-E54E0-V0-00

Fits ’08-’09 YZ450F; ’08-’15 WR450F GYT-5XD35-10-AL

GYTR® RADIATOR BRACES

The GYTR Radiator Braces are constructed of an ultrastrong lightweight 5052 aluminum with rolled edges and structural ribs to provide maximized impact protection and optimized strength-to-weight ratio. No trimming of plastics required.

Fits ’23-’25 YZ450F; ’24-’25 YZ450FX; ’24-’25 WR450F

BHR-E24C0-V0-00

Fits ’18-’22 YZ450F

BR9-E24C0-V0-00

GYTR® BILLET CLUTCH PRESSURE PLATE

The GYTR Billet Clutch Pressure Plate is precisionmachined from the highest grade of aluminum, then hard anodized to achieve an exceptionally hard, wear-resistant surface for amazing race-proven durability. Additional oil passages help improve clutch performance and also contribute to weight reduction and less rotational mass for quicker engine acceleration performance.

Fits ’07-’22 YZ450F; ’19-’23 YZ450FX; ’03-’23 WR450F GYT-2S256-20-00

GYTR® BILLET CLUTCH INNER HUB

The GYTR Billet Clutch Inner Hub is precision-machined from the highest grade of aluminum, then hard anodized to achieve an exceptionally hard wear-resistant surface. Additional oil passages help improve clutch performance and contribute to weight reduction and less rotational mass for improved acceleration.

Fits ’05-’22 YZ450F; ’16-’23 YZ450FX; ’10-’23 WR450F GYT-5XD56-40-00

GYTR® BILLET CLUTCH BASKET

The GYTR Billet Clutch Basket is precision-machined from the highest grade of aluminum and then anodized to achieve an exceptionally hard, wear-resistant surface. This clutch basket provides amazing, race-proven durability.

Fits ’18-’22 YZ450F; ’19-’23 YZ450FX; ’19-’23 WR450F BR9-E63A0-V0-00

Performance / Protection

GYTR® AIR FLOW KIT

The GYTR Air Flow Kit is designed to increase air box volume and air flow resulting in more power. Kit includes: two air filters, GYTR base plate, GYTR air filter cage, Cycra® airbox cover, and all the necessary mounting hardware. This accessory is restricted to closed-course competition use.

Fits ’18-’22 YZ450F; ’19-’23 YZ450FX; ’19-’23 WR450F

B7B-E41E0-V0-00

GYTR® COMMUNICATION CONTROL UNIT

The GYTR Communication Control Unit (CCU) enables communication between motorcycle ECU and an iOS or Android® device via the Yamaha Power Tuner App. Includes a free download of Yamaha’s CCU configuration apps, an onboard Wi-Fi system for the ultimate in track-side tuning – easy downloads of captured data for analyzation and uploads of setting changes, and all necessary hardware for an easy, quick installation process. ’21-’23 WR450F models require the GYTR Competition Kit (BDB-E9500-V0-00), sold separately. This accessory is restricted to closed-course competition use.

Fits ’19-’23 WR450F

B7R-H59C0-V0-00

AIR BOX WASH CAP

Eases air box cleaning and leaves no gaps that would allow water to penetrate when used. Made of ABS plastic with a closed-cell foam rubber gasket. Tool-less install and removal.

Fits ’18-’22 YZ450F; ’19-’23 YZ450FX; ’19-’23 WR450F

BR9-E41E0-V0-00

GYTR® COMPETITION KIT

The Competition Kit replaces the stock ECU, includes a modified throttle stop to allow full throttle operation, and permits the usage of the Yamaha Power Tuner App that allows the rider to select between 2 pre-programed ECU maps. The GYTR Communication Control Unit (B7R-H59C0-V0-00) and/ or Map Switch (B7B-83976-10-00), each sold separately, is needed for usage of the Yamaha Power Tuner App on ’21-’23 WR450F models. Installation is quick and easy. This accessory is restricted to closed-course competition use.

Fits ’24-’25 WR450F

BNK-E9500-V0-00 NEW!

Fits ’21-’23 WR450F

BDB-E9500-V0-00

GYTR® RADIATOR FAN KIT

This Radiator Fan Kit adds a cooling fan to the right side radiator, increasing the overall cooling capability. Good for tight, muddy riding conditions and competition. Easy installation, motorcycle is already pre-wired for plugand-play. No modifications necessary.

Fits ’24-’25 YZ450FX

BNL-E24E0-V0-00 NEW!

Fits ’19-’23 YZ450FX

B3J-E24E0-V0-00

MAP SWITCH

The Map Switch is a great accessory to switch from one programmed map to another with a flip of a switch. Easy and quick installation. Motorcycle is already pre-wired for plug-and-play installation. GYTR Communication Control Unit (B7R-H59C0-V0-00), sold separately, is recommended but not required. NOTE: Requires the GYTR Competition Kit (BNK-E9500-V0-00 or BDB-E9500-V0-00), sold separately. This accessory is restricted to closed-course competition use.

Fits ’18-’23 WR450F

B7B-83976-10-00

GYTR® TALL SEAT

The GYTR Tall Seat is 3/4" taller than the stock seat and is the perfect seat for taller riders, making it easier for the rider to get to the standing position from the seated position. The seat comes fully assembled with a gripper seat cover making installation and removal of the accessory simple and easy.

Fits ’18-’22 YZ450F; ’19-’23 YZ450FX; ’19-’23 WR450F BR9-F47C0-V0-00

GYTR® SHORT SEAT

The GYTR Short Seat is 3/4" shorter than the stock seat and is the perfect seat for shorter riders. The seat comes fully assembled with a gripper seat cover making installation and removal of the accessory simple and easy.

Fits ’18-’22 YZ450F; ’19-’23 YZ450FX; ’19-’23 WR450F BR9-F47C0-T0-00

GYTR® HD Chain Guide

The GYTR Chain Guide’s heavy-duty UHMPE material resists deformation and returns to its original shape after impacts, minimizing the risk of chain derailment or damage. Includes all required hardware.

Fits ’23-’25 YZ450F

BHR-F21E0-V1-00

Fits ’07-’22 YZ450F; ’16-’22 YZ450FX; ’07-’20 WR450F 17D-F21E0-V1-00

Performance / Protection / Controls / LAST CHANCE

GYTR® STAINLESS STEEL BRAIDED BRAKE LINE KIT

These top-quality brake lines are designed to not fatigue even under extreme conditions.

Fits ’10-’25 YZ450F; ’16-’25 YZ450FX; ’09-’25 WR450F

17D-F58E0-V0-00 (Front)

GYTR® MOTORCYCLE COVER

Keep your YZ protected from dust at the track or in your garage with this Yamaha cover. The cover is a traditional Yamaha racing blue color featuring the GYTR, Yamalube, and bLU cRU® logos. Made out of a lightweight material that can be quickly rolled up into the conveniently attached storage bag, the cover is water-resistant, and equipped with a drawstring at the bottom to keep the cover in place. NOTE: Recommended for storage use only; not for trailering or transport.

Fits all YZ models except YZ85 and YZ65 1SL-F81A0-V0-00

’16-’25 YZ450FX; ’09-’25 WR450F 5XC-F72A0-V0-00

GYTR® BRAKE LINE PINCH

This pinch replaces the stock steel pinch with a blue anodized billet aluminum piece.

Fits ’06-’25 YZ450F; ’16-’25 YZ450FX; ’06-’25 WR450F

GYT-1P818-15-00

GYTR® MAGNETIC OIL DRAIN PLUG

Replace the stock steel drain plug with this 6061 billet Magnetic Oil Drain Plug. 60% lighter than stock. Includes a magnet that collects metal shavings, preventing them from circulating in the motor oil. Used by Yamaha Racing Teams.

Fits ’14-’25 YZ450F; ’16-’25 YZ450FX; ’19-’25 WR450F 18P-E51C0-U0-00

GYTR® BILLET OFFSET AXLE BLOCKS

These billet aluminum soft anodized axle blocks are reversible and offset and keep the adjustment bolts from extending too far back when running the rear wheel toward the back of the swingarm for maximum wheelbase.

Fits ‘10-’25 YZ450F; ‘16-’25 YZ450FX; ‘24-’25 WR450F 33D-F53M0-V0-00

GYTR® TIMING PLUG

These anodized 6061 billet aluminum timing plugs replace the stock plastic plugs.

10-’24 YZ450F; ’16-’24 YZ450FX; ’16-’23 WR450F

5XC-E51B0-V0-00 (Black) (14mm)

LAST CHANCE! GYTR® ENDURO GLIDE PLATE

The GYTR Enduro Glide Plate is the ultimate in protection when gliding over obstacles. This easyto-install upgrade is made of 3.2 mm aluminum and features billet aluminum mounting brackets. Water pump and coolant hose protection integrated into glide plate design.

Fits ’19-’23 YZ450FX; ’19-’23 WR450F

B3J-F14B0-T0-00

Fits ’18-’21 YZ450F

BR9-F14B0-T0-00

LAST CHANCE! GYTR® PORTED CYLINDER HEAD ASSEMBLY

The GYTR Ported Cylinder Head Assembly comes fully assembled and ready to install with no costly core charges, deposits or exchange programs that can add downtime. CNC milling helps eliminate the variances that hand porting can produce. The head was developed on the flow bench in conjunction with dyno and track testing to ensure the ultimate in performance and durability. GYTR Performance Camshaft Kit is included, as well as stock valve train and cam gears for durability and easy maintenance.

This accessory is restricted to closed-course competition use.

Fits ’20-’22 YZ450F

B2W-E11B0-V0-00

Fits ’18-’19 YZ450F

BR9-E11B0-V0-00

LAST CHANCE! GYTR® PIVOTING LEVERS GYTR Pivoting Levers are designed with a folding-pivot blade that will fold in the event of a tip-over. Pivot ratio mimics stock for excellent performance.

Fits ’16-’18 YZ450FX; ’05-’22 WR450F, 2GB-H39B0-V0-00 (Clutch)

LAST CHANCE! GYTR® PERFORMANCE HIGHFLOW AIR FILTER

Fits ’10-’13 YZ450F 33D-E41C0-V0-00

LAST CHANCE! YAMAHA GENUINE REPLACEMENT SIDE COVERS

The Yamaha Genuine Replacement Side Covers are sold as a pair. Yamaha Genuine replacements for the stock covers (graphics not included). Less expensive than purchasing stock covers that use a very expensive inlay process for the graphics. Includes metal collars.

Fits ’14-’17 YZ450F; ’16-’18 YZ450FX 1SL-W003D-00-00

LAST CHANCE! GYTR® PERFORMANCE CAMSHAFT KIT

Maximize your top-end horsepower with this Performance Cam Kit. Ground to exact specifications using special CNC cam-grinding machines. Special billet alloy construction provides consistent machined surfaces for increased durability, with advanced REM® surface finishing, a technology that, on a nano level, allows for better lubrication. Cams come with durable stock cam gears and de-comp installed, degreed-in, and ready to install. No costly core charges or deposits, or exchange programs that can add to downtime. Designed for use in modified engines equipped with a highcompression piston. This accessory is restricted to closed-course competition use.

Fits ’20-’22 YZ450F

B2W-E21F0-V0-00

Fits ’18-’19 YZ450F

BR9-E21F0-V0-00

LAST CHANCE! GYTR® BILLET CLUTCH PRESSURE PLATE

Fits ’03-’06 YZ450F; ’16-’18 YZ450FX GYT-5XD56-20-00

LAST CHANCE! GYTR® MX GLIDE PLATE

The GYTR MX Glide Plate is constructed of high molecular weight polyethylene. The MX Glide Plate is a flexible, lightweight and low drag coefficient alternative to aluminum glide plates when needing a smooth surface for “gliding” over obstacles. It can be used in conjunction with stock water pump cover or GYTR Water Pump Guard.

Fits ’18-’22 YZ450F BR9-F14B0-V0-00

WHEEL ASSEMBLY

The wheel assemblies for the YZ series include the hub, bearing, oil seal, spokes, rim, brake disc, and sprocket.

Fits ’23-’24 YZ450F

BSB-25102-00-00 (Front)

Fits ’21-’22 YZ450F

B2W-25102-00-00 (Front)

Fits ’22-’24 YZ450FX

BEX-25102-10-00 (Front)

Fits ’22-’24 WR450F

BDB-25102-20-00 (Front)

Fits ’22-’24 YZ450F

B2W-25302-30-00 (Rear)

Fits ’21 YZ450F

B2W-25302-00-00 (Rear)

Fits ’22-’23 YZ450FX

BEX-25302-10-00 (Rear)

Fits ’21 YZ450FX

BEX-25302-00-00 (Rear)

Fits ’20-’22 WR450F

B7R-25302-10-00 (Rear)

YAMAHA GENUINE PISTON REBUILT KIT

Fits ’23-’24 YZ450F; ’24 YZ450FX; ’24 WR450F

BHR-WB033-00-00

Fits ’20-’22 YZ450F; ’21-’23 YZ450FX; ’21-’23 WR450F

B2W-WB033-10-00

Fits ’18-’19 YZ450F; ’19-’20 YZ450FX; ’19-’20 WR450F

BR9-WB033-00-00

YAMAHA GENUINE FRONT FORK SEAL KIT

Yamaha Genuine Fork Seal Kits come with the original equipment fork and dust seals for longer life and less maintenance. Use Yamalube Fork Oils (sold separately), which are highly recommended because they are formulated specifically for your model to deliver superior suspension performance.

Fits ‘23-’24 YZ450F; ’24 YZ450FX; ’24 WR450F

BHR-W003B-00-00

Fits ‘22 YZ450F; ’23 YZ450FX; ’23 WR450F

BDB-W003B-01-00

Fits ‘21 YZ450F

B2W-W003B-10-00

Fits ‘21-’22 YZ450FX; 21-’22 WR450F

BDB-W003B-00-00

YAMAHA GENUINE CLUTCH KIT

These complete Yamaha Genuine Clutch Kits include the plates, springs, and gaskets, ready to install. Refer to service manual for installation instructions.

Fits ’23-’24 YZ450F

BHR-W001G-00-00

Fits ’18-’22 YZ450F

BR9-W001G-00-00

Fits ’24 YZ450FX; ’24 WR450F

BNK-W001G-00-00

Fits ’19-’23 WR450F; ’19-’23 YZ450FX

B3J-W001G-00-00

Fits’16-’18 YZ450FX; ’16-’18 WR450F 2GC-W001G-00-00

YAMAHA GENUINE BEARING KITS

These Yamaha Genuine Bearing Kits come with all of the components needed to rebuild the swingarm pivot, shock linkage, and shock bearings. Kits include all of the original equipment bearings, seals, O-rings, and collars your bike came with. These bearings are O-ring sealed to prevent intrusion of dirt, mud, and water and are made of top quality materials.

Fits ’07-’24 YZ450F; ’16-’24 YZ450FX; ’16-’24 WR450F

1SS-W002G-00-00 (Shock Bearing Kit)

Fits ‘20-’24 YZ450F; ’20-’24 YZ450FX; ’20-’24 WR450F

33D-W002E-00-00 (Shock Linkage Bearing Kit)

Fits ‘19-’24 YZ450F; ’19-’24 YZ450FX; ’20-’24 WR450F

BR9-W002C-00-00 (Swing Arm Pivot Bearing Kit)

YAMAHA GENUINE 4-STROKE PISTON KIT

Kit includes a high quality forged aluminum piston, ring, circlips, and wrist pin. Complete OEM Top End Gasket Kits available for most models (sold separately). Kit shown here may differ slightly depending on application.

Fits ’23-’24 YZ450F; ’24 YZ450FX; ’24 WR450F

BHR-116A0-00-00

Fits ’20-’22 YZ450F; ’21-’23 YZ450FX; ’21-’23 WR450F

B2W-116A0-00-00

Fits ’18-’19 YZ450F; ’19-’20 YZ450FX; ’19-’20 WR450F

BR9-116A0-00-00

YAMAHA GENUINE GASKET KIT

These original-equipment Top End and Bottom End Gasket Kits were designed for convenience and total savings. Kits include the necessary gaskets, seals, and O-rings needed to reassemble your engine. They also include a complete part number list of all gaskets, seals, and O-rings for an in-depth engine overhaul.

Fits ’20 YZ450F; ’20 YZ450FX

B2W-W0001-00-00 (Top End Gasket Kit)

Fits ’20 YZ450F; ’20 YZ450FX

B2W-W0002-00-00 (Bottom End Gasket Kit)

Fits ’20 WR450F; ’18-’19 YZ450F; ’19-’20 YZ450FX

BR9-W0001-00-00 (Top End Gasket Kit)

Fits ’20 WR450F; ’18-’19 YZ450F; ’19-’20 YZ450FX

BR9-W0002-00-00 (Bottom End Gasket Kit)

YAMAHA GENUINE BRAKE PADS

Yamaha plans and designs brake systems while developing the bike itself to match each individual model’s character, usage, and specifications. All Yamaha Brake Pads and Shoes are first bench-tested, then road tested, with expert riders providing the final word. The finished product provides superb braking power and control, in both dry and wet conditions, and at both low and high speeds. NOTE: Image for reference only and may not be exactly as shown.

Fits ’20-’24 YZ450F; ’21-’24 YZ450FX; ’21-’24 WR450F

B2W-25805-00-00 (Front)

Fits ‘16-’19 YZ450F; ’16-’20 YZ450FX; ’16-’20 WR450F

B29-25805-00-00 (Front)

Fits ’11-’24 YZ450F

1C3-W0046-50-00 (Rear)

Fits ’16-’24 YZ450FX; ’11-’24 9 WR450F 1C3-W0046-B0-00 (Rear)

’24 MODEL GENUINE SERVICE PARTS

YAMAHA GENUINE CHAIN AND SPROCKET KIT

Factory assembled, ready for installation and comes complete with chain, front sprocket and rear sprocket.

Fits ’22-’24 YZ450F

B2W-W001A-20-00

Fits ’22-’24 YZ450FX

BEX-W001A-10-00

Fits ’21-’24 WR450F

BDB-W001A-00-00

YAMAHA GENUINE OILS & FILTERS

YAMAHA GENUINE PARTS Battery

5D3-13440-09-00

BR9-82100-48-00

5D3-13440-09-00

BR9-82100-A9-00

5D3-13440-09-00

BR9-82100-A9-00 Spark Plug

LMA-R8G00-00-00 LMA-RG800-00-00 LMA-R8G00-00-00 Air Cleaner

Front Brake Pad Kit (Order Qty)

Rear Brake Pad Kit (Order Qty)

Drive Chain

Front Sprocket

Rear Sprocket

Front Fork Seal Kit

Fork Oil Seal

Fork Dust Seal

Bearing Kit - Shock Linkage

Bearing Kit - Swingarm Pivot

Clutch Kit

BHR-14451-00-00

B2W-25805-00-00 (1)

1C3-W0046-50-00 (1)

9Y582-60113-00

9383E-13233-00

B2W-25449-00-00

BHR-W003B-00-00

B29-23145-00-00

BHR-23144-00-00

33D-W002E-00-00

BR9-W002C-00-00

BHR-W001G-00-00

BHR-14451-00-00

B2W-25805-00-00 (1)

BHR-14451-00-00

B2W-25805-00-00 (1)

1C3-W0046-B0-00 (1) 1C3-W0046-B0-00 (1)

9Y582-50113-00

9383E-13233-00

B2W-25450-00-00

BHR-W003B-00-00

B29-23145-00-00

BHR-23144-00-00

33D-W002E-00-00

BR9-W002C-00-00

BNK-W001G-00-00

9Y582-50113-00

9383E-13233-00

5TJ-25450-80-00

BHR-W003B-00-00

B29-23145-00-00

BHR-21344-00-00

33D-W002E-00-00

BR9-W002C-00-00

BNK-W001G-00-00

GYTR® BILLET CLUTCH COVER

B7B-E54E0-V0-00

GYTR® BILLET CLUTCH BASKET

B7B-E54E0-V0-00

GYTR BILLET CLUTCH PRESSURE PLATE

B7B-E63B0-V0-00

GYTR® BILLET CLUTCH INNER HUB

B7B-E63C0-V0-00

GYTR® BILLET IGNITION COVER

B7B-E54G0-V0-00

GYTR RADIATOR BRACES

BHR-E24C0-V0-00

GYTR® PERFORMANCE

HIGH-FLOW AIR FILTER

BHR-E41C0-V0-00

GYTR® HIGH-COMPRESSION PISTON KIT

B7B-E16A0-V0-00

Performance

GYTR® PORTED CYLINDER

HEAD ASSEMBLY

The YZ250F GYTR Performance Ported Head Kit increases horsepower and torque across the entire YZ250F power curve. Developed and used by Yamaha race teams, the kit offers professional-level performance while maintaining strict Yamaha durability standards. Comes fully assembled and ready to install with two specific GYTR Yamaha Power Tuner maps to optimize performance. Highly recommend use with the GYTR High Compression Piston Kit (B7B-E16A0-V0-00)

Fits ’24-’25 YZ250F

BMF-E11B0-V0-00 NEW!

Fits ’21-’23 YZ250F

B7B-E11B0-T0-00

GYTR®

FLYWHEEL

The GYTR YZ250F Weighted Flywheel provides excellent traction and control in hard pack and low-traction conditions. Also reduces low-speed stalls and decreases engine braking feel.

Fits ’19-’25 YZ250F; ’20-’25 YZ250FX

BMF-H13A0-V0-00

Fits ‘19-’23 YZ250F; ’20-’24 YZ250FX; ’20-’21 WR250F

B7B-H13A0-V0-00

GYTR® HIGH-COMPRESSION PISTON KIT

The GYTR High-Compression Piston Kit provides a performance boost throughout the rpm range while maintaining a high level of durability. Machined valve pockets provide additional valve clearance when used with higher lift camshafts. The kit includes piston rings, piston pin, and clips (uses stock replacements). Requires use of minimum 100-octane racing fuel. Boosts engine compression ratio to 14:1. IMPORTANT: For use on ’14-’15 YZ250F models, you must replace stock oil nozzle with newer component (1SM-15155-10-00) for proper function of GYTR High-Compression Piston. This accessory is restricted to closed-course competition use.

Fits ’19-’25 YZ250F

B7B-E16A0-V0-00

Fits ’14-’18 YZ250F

1SM-E16A0-T1-00

GYTR® PERFORMANCE HIGH-FLOW AIR FILTER

Maximizes airflow while maintaining exceptional filtration with a completely washable and reusable foam element. Features a two-stage foam construction, wielded foam junction, and grommets come included. For optimized performance please service with Yamalube Foam Filter Oil (ACC-FOAMF-LT-ER), sold separately.

This accessory is restricted to closed-course competition use.

Fits ’24-’25 YZ250F; ’25 YZ250FX; ’25 WR250F

BHR-E41C0-V0-00

Fits ’19-’23 YZ250F; ’20-’24 YZ250FX; ’20-’23 WR250F

BR9-E41C0-V0-00

Fits ’14-’18 YZ250F; ’15-’19 YZ250FX; ’15-’19 WR250F

1SL-E41C0-V0-00

GYTR® PERFORMANCE CAMSHAFT KIT

Maximize your top-end horsepower with this Performance Cam Kit. Ground to exact specifications using special CNC cam-grinding machines. Special billet alloy construction provides consistent machined surfaces for increased durability. Cams come with durable stock cam gears and de-comp installed, degreed-in, and ready to install. No costly core charges or deposits, or exchange programs that can add to downtime. Designed for use in modified engines equipped with a high-compression piston. This accessory is restricted to closed-course competition use.

Fits ’21-’23 YZ250F

B7B-E21F0-T0-00

Fits ’19-’20 YZ250F

B7B-E21F0-V0-00

GYTR® BILLET IGNITION COVER

Constructed of billet aluminum and coated with a hard anodized finish, developed in conjunction with race teams to provide a stronger cover that limited the risk of the oil cap and large timing plug loosening during a race. The improved finish is both durable and attractive. Installation removes the oil cap and both timing plugs.

Fits ’19-’25 YZ250F; ’20-’25 YZ250FX; ’20-’25 WR250F B7B-E54G0-V0-00

GYTR® BILLET CLUTCH COVER

Precision-machined from the highest grade of aluminum and then anodized to achieve an exceptionally hard, wear-resistant surface.

Fits ’19-’25 YZ250F; ’20-’25 YZ250FX; ’20-’25 WR250F

B7B-E54E0-V0-00

Fits ’14-’18 YZ250F; ’15-’19 YZ250FX; ‘ ’15-’19 WR250F

1SM-E54E0-V0-00

GYTR® BILLET CLUTCH PRESSURE PLATE

Precision-machined from the highest grade of aluminum, then hard anodized to achieve an exceptionally hard, wear-resistant surface for amazing race-proven durability. Additional oil passages help improve clutch performance and contribute to weight reduction and less rotational mass for quicker engine acceleration performance.

Fits ’19-’25 YZ250F; ’20-’25 YZ250FX; ’15-’25 WR250F

B7B-E63B0-V0-00

GYTR® BILLET CLUTCH INNER HUB

Precision-machined from the highest grade of aluminum, then hard-anodized to achieve an exceptionally hard wear-resistant surface for amazing race-proven durability. Additional oil passages help improve clutch performance and contribute to weight reduction and less rotational mass for quicker engine acceleration performance.

Fits ’19-’25 YZ250F; ’20-’25 YZ250FX; ’15-’25 WR250F

B7B-E63C0-V0-00

GYTR® BILLET CLUTCH BASKET

Precision-machined from the highest grade of aluminum and then anodized to achieve an exceptionally hard, wear-resistant surface. This clutch basket provides amazing, race-proven durability.

Fits ’19-’25 YZ250F; ’20-’25 YZ250FX; ’20-’25 WR250F

B7B-E63A0-V0-00

GYTR® AIR FLOW KIT

The GYTR Air Flow Kit is designed to increase air box volume and air flow resulting in more power. Kit includes: Two air filters, GYTR base plate, GYTR air filter cage, Cycra® airbox cover, and all the necessary mounting hardware. This accessory is restricted to closed-course competition use.

Fits ’19-’23 YZ250F; ’20-’24 YZ250FX; ’20-’24 WR250F

B7B-E41E0-V0-00

GYTR® RADIATOR BRACES

Fits ’24 -’25 YZ250F

BHR-E24C0-V0-00

Fits ’19-’23 YZ250F

BR9-E24C0-V0-00

YAMAHA AIR BOX WASH CAP

Eases air box cleaning and leaves no gaps that would allow water to penetrate when used. Features a large, tool-less knob and is made of ABS plastic with a fully sealed rubber gasket on the leading edge. Is easy to install and remove.

Fits ’19-’23 YZ250F; ’20-’24 YZ250FX; ’20-’24 WR250F BR9-E41E0-V0-00

NEW! GYTR® BILLET RADIATOR GUARDS

Fits ’24 -’25 YZ250F; ’25 YZ250FX BNL-E24D0-V0-00

GYTR® RADIATOR FAN KIT

Fits ’25 YZ250FX

BNL-E24E0-V0-00

Fits ’20-’24 YZ250FX

B3J-E24E0-V0-00

Fits ’15-’19 YZ250FX

B29-E24E0-V0-00

GYTR® COMMUNICATION CONTROL UNIT

The GYTR Communication Control Unit (CCU) enables communication between motorcycle ECU and an iOS or Android® device via the Yamaha Power Tuner App. Includes a free download of Yamaha’s CCU configuration apps, an onboard Wi-Fi system for the ultimate in track-side tuning – easy downloads of captured data for analyzation and uploads of setting changes, and all necessary hardware for an easy, quick installation process. Requires the GYTR Competition Kit (BAK-E9500-T0-00 or BAK-E9500-V0-00).

This accessory is restricted to closed-course competition use.

Fits ’20-’24 WR250F

B7R-H59C0-V0-00

GYTR® COMPETITION KIT

The Competition Kit replaces the stock ECU, includes a modified throttle stop to allow full throttle operation, and permits the usage of the Yamaha Power Tuner App that allows the rider to select between 2 pre-programed ECU maps. The GYTR Communication Control Unit (B7RH59C0-V0-00) and/ or Handlebar Map Switch (B7B83976-10-00), each sold separately, needed for usage of the Yamaha Power Tuner App on ’20-’23 WR250F models. Installation is quick and easy. This accessory is restricted to closed-course competition use.

Fits ’22-’24 WR250F

BAK-E9500-T0-00

Fits ’20-’21 WR250F

BAK-E9500-V0-00

MAP SWITCH

The Map Switch is a great accessory to switch from one programmed map to another with a flip of a switch. Easy and quick installation. Motorcycle is already pre-wired for plug-and-play installation. GYTR Communication Control Unit B7R-H59C0-V0-00, sold separately, is recommended but not required. NOTE: Requires the GYTR Competition Kit (BAK-E9500-V0-00 or BAK-E9500-T0-00), sold separately. This accessory is restricted to closed-course competition use.

Fits ’19-’24 WR250F B7B-83976-10-00

GYTR® TALL SEAT

Taller than the stock seat (slightly under 1" taller). Fully assembled seat assembly with gripper seat cover. Great for taller riders. Helps hold rider in seated position. Simple installation and removal.

Fits ’19-’23 YZ250F; ’20-’24 YZ250FX; ’20-’24 WR250F

BR9-F47C0-V0-00

GYTR® SHORT SEAT

Shorter than the stock seat (slightly under 1" shorter). Fully assembled seat assembly with gripper seat cover. Great for shorter riders. Helps hold rider in seated position. Simple installation and removal.

Fits ’19-’23 YZ250F; ’20-’24 YZ250FX; ’20-’24 WR250F

BR9-F47C0-T0-00

GYTR® PLASTIC CHAIN GUIDE

This ultra-durable UHMWPE plastic guide is designed to flex, not bend, in the event of impact.

Fits ’24-’25 YZ250F

BHR-F21E0-V1-00

Fits ‘07-’23 YZ250F; ’15-’24 YZ250FX; ’07-’21 WR250F 17D-F21E0-V1-00

Protection / Controls / LAST CHANCE

GYTR® STAINLESS STEEL BRAIDED BRAKE LINE KIT

These top-quality brake lines are designed to not fatigue even under extreme conditions.

Fits ’10-’25 YZ250F; ’20-’25 YZ250FX; ’09-’25 WR250F

17D-F58E0-V0-00 (Front)

Fits ‘21-’25 YZ250F; ’22-’24 YZ250FX

B2W-F58A0-V0-00 (Rear)

Fits ’19-’20 YZ250F; ’19-’21 YZ250FX; ’15-’23 WR250F

5XC-F58A0-V0-00 (Rear)

GYTR® MOTORCYCLE COVER

Keep your YZ protected from dust at the track or in your garage with this Yamaha cover. The cover is a traditional Yamaha racing blue color featuring the GYTR, Yamalube, and bLU cRU® logos. Made out of a lightweight material that can be quickly rolled up into the conveniently attached storage bag, the cover is water-resistant and equipped with a drawstring at the bottom to keep the cover in place. NOTE: Recommended for storage use only; not for trailering or transport.

Fits all YZ models except YZ85 and YZ65 1SL-F81A0-V0-00

GYTR® MAGNETIC OIL DRAIN PLUG

Fits ’07-’25 YZ250F; ‘ ’15-’25 YZ250FX; ’20-’25 WR250F 18P-E51C0-U0-00

GYTR® TIMING PLUG

These anodized 6061 billet aluminum timing plugs replace the stock plastic plugs.

Fits ’14-’24 YZ250F; ’15-’24 YZ250FX; ’15-’23 WR250F 5XC-E51B0-V0-00 (Black) (14mm)

GYTR® 20 OIL FILL CAP

Anodized 6061 billet aluminum plug replaces stock plastic cap.

Fits ’06-’25 YZ250F; ’15-’25 YZ250FX; ’20-’25 WR250F

GYT-2S235-01-00

’09-’25 WR250F 5XC-F72A0-V0-00

GYTR® BRAKE LINE PINCH

This pinch replaces the stock steel pinch with a blue anodized billet aluminum piece.

Fits ’06-’25 YZ250F; ’15-’25 YZ250FX; ’06-’25 WR250F

GYT-1P818-15-00

Fits ’11-’25 YZ250F

33D-F53M0-V0-00

YAMAHA KICKSTAND REMOVAL KIT (PEG MOUNT)

Allows rider to remove the stock kickstand. Kit replaces the left side foot peg bracket. Kit includes the same components that come standard on YZ four-stroke models. The durability and quality you expect from Yamaha Genuine Parts.

Fits ’15-’25 YZ250FX; ’15-’25 WR250F

B91-F73A0-V0-00

LAST CHANCE! GYTR® FLYWHEEL

Fits ’14-’18 YZ250F

1SM-H13A0-V0-00

LAST CHANCE! GYTR® PIVOTING LEVERS

GYTR Pivoting Levers are designed with a folding-pivot blade that will fold in the event of a tip-over. Pivot ratio mimics stock for excellent performance.

Fits ’15-’19 YZ250FX; ’05-’22 WR250F

2GB-H39B0-V0-00 (Clutch)

Genuine Service Parts

WHEEL ASSEMBLY

The wheel assemblies for the YZ series include the hub, bearing, oil seal, spokes, rim, brake disc, and sprocket.

Fits ’23-’24 YZ250F

BSB-25102-00-00 (Front)

Fits ’22 YZ250F

B2W-25102-00-00 (Front)

Fits ’21 YZ250F

B7B-25102-30-00 (Front) (Shown)

Fits ’22-’24 YZ250FX

BAJ-25102-00-00 (Front)

Fits ’21 YZ250FX

B29-25102-30-00 (Front)

Fits ’22-’24 WR250F

BAK-25102-20-00 (Front)

Fits ’22-’24 YZ250F

B7B-25302-40-00 (Rear)

Fits ’21 YZ250F

B7B-25302-30-00 (Rear) (Shown)

Fits ’22-’24 YZ250FX

BAJ-25302-00-00 (Rear)

Fits ’21 YZ250FX

B29-25302-30-00 (Rear)

Fits ’21-’24 WR250F

BAK-25302-00-00 (Rear)

YAMAHA GENUINE CLUTCH KIT

These complete Yamaha Genuine Clutch Kits include the plates, springs, and gaskets, ready to install. Refer to service manual for installation instructions.

Fits ’19-’24 YZ250F

B7B-W001G-00-00

Fits ‘22-’24 YZ250FX; ’22-’24 WR250F

BAJ-W001G-10-00

Fits ’15-’19 YZ250FX; ’15-’19 WR250F

2GB-W001G-00-00

Fits ‘17-’18 YZ250F

1SM-W001G-10-00

YAMAHA GENUINE FRONT FORK SEAL KITS

Fits ’24 YZ250F

BHR-W003B-00-00

Fits ‘22-’23 YZ250F; ’22-’24 YZ250FX; ’22-’24 WR250F

BDB-W003B-01-00

Fits ‘21 YZ250F; ’21 YZ250FX

BDB-W003B-00-00

Fits ‘21 WR250F

B2W-W003B-10-00

Fits ‘18-’20 YZ250F; ’17-’20 YZ250FX; ’18-’21 WR250F

B29-W003B-00-00

YAMAHA GENUINE BEARING KITS

These Yamaha Genuine Bearing Kits come with all of the components needed to rebuild the swingarm pivot, shock linkage, and shock bearings. Kits include all of the original equipment bearings, seals, O-rings, and collars your bike came with. Unlike some of the aftermarket companies that use a lower quality bearing, these bearings are O-ring-sealed to prevent intrusion of dirt, mud, and water and are made of top quality materials.

Fits ’07-’24 YZ250F; ’15-’24 YZ250FX; ’20-’24 WR250F

1SS-W002G-00-00 (Shock Bearing Kit)

Fits ‘09-’24 YZ250F; ’15-’24 YZ250FX; ’20-’24 WR250F

33D-W002E-00-00 (Shock Linkage Bearing Kit)

Fits ‘19-’24 YZ250F; ’20-’24 YZ250FX; ’20-’24 WR250F

BR9-W002C-00-00 (Swingarm Pivot Bearing Kit)

YAMAHA GENUINE GASKET KIT

Fits ’19-’20 YZ250F; ’20 YZ250FX; ’20 WR250F

B7B-W0001-00-00 (Top End Gasket Kit)

Fits ’19-’22 YZ250F; ’20-’22 YZ250FX

B7B-W0002-00-00 (Bottom End Gasket Kit)

Fits ‘14-’18 YZ250F; ‘15-’19 YZ250FX; ‘15-’19 WR250F

1SM-W0001-00-00 (Top End Gasket Kit)

Fits ‘14-’18 YZ250F; ‘15-’19 YZ250FX

1SM-W0002-00-00 (Bottom End Gasket Kit)

YAMAHA GENUINE PISTON REBUILT KIT

Yamaha Genuine Piston Rebuilt Kits feature a highquality forged aluminum piston, proven OEM fitment, and pass Yamaha’s durability and reliability standards. This kit includes: piston, ring, circlips, wrist pin, gaskets, seals, and O-rings, all of the parts needed to rebuild the top end of your machine. Designed with convenience and cost savings. Sample image – actual kit contents vary by model.

Fits ’23-’24 YZ250F B7B-WB033-11-00

Fits ’22-’24 YZ250FX; ’22-’24 WR250F BAJ-WB033-00-00

YAMAHA GENUINE 4-STROKE PISTON KIT

Kit includes a high-quality forged aluminum piston, ring, circlips, and wrist pin. Complete OEM Top End Gasket Kits available for most models (sold separately). Kit shown here may differ slightly depending on application.

Fits ’22-’24 YZ250FX; ’22-’24 WR250F

B7B-116A0-20-00

Fits ‘19-’24 YZ250F; ’20-’21 YZ250FX; ’20-’21 WR250F

B7B-116A0-00-00

Fits ’16-’18 YZ250F; ’17-’19 YZ250FX; ’18-’19 WR250F 1SM-116A0-10-0

YAMAHA GENUINE BRAKE PADS

Fits ’21-’24 YZ250F; ’22-’24 YZ250FX; ’22-’24 WR250F

B2W-25805-00-00 (Front)

Fits ’15-’21 YZ250FX; ’17-’21 WR250F

B29-25805-01-00 (Front) Fits ’11-’24 YZ250F 1C3-W0046-50-00 (Rear)

YAMAHA GENUINE CHAIN AND SPROCKET KIT

Factory assembled, ready for installation and comes complete with chain, front sprocket and rear sprocket.

Fits ’22-’24 YZ250F

B7B-W001A-20-00

Fits ’22-’24 YZ250FX

BAJ-W001A-10-00

Fits ’21-’24 WR250F

BAK-W001A-00-00

Fits ’15-’24 YZ250FX; ’11-’24 WR250F 1C3-W0046-B0-00 (Rear)

YAMAHA GENUINE PARTS

Front Brake Pad Kit (Order Qty)

BMF-14411-00-00

B2W-25805-00-00 (1)

B2W-14451-01-00

B2W-25805-00-00 (1)

PARTS

B2W-14451-01-00

B2W-25805-00-00 (1)

Rear Brake Pad Kit (Order Qty) 1C3-W0046-50-00 (1) 1C3-W0046-B0-00 (1) 1C3-W0046-B0-00 (1)

Drive Chain

Front Sprocket

Rear Sprocket

Front Fork Seal Kit

Fork Oil Seal

9Y582-60113-00

9383B-13218-00

B2W-25450-00-00

BHR-W003B-00-00

B29-23145-00-00

9Y582-50113-00

9383B-13218-00

B2W-25451-00-00

BDB-W003B-01-00

B29-23145-00-00

Fork Dust Seal BHR-23144-00-00 5XE-23144-L0-00

9Y582-50113-00

9383B-13218-00

BAK-25451-00-00

BDB-W003B-01-00

B29-23145-00-00

5XE-23144-L0-00

Bearing Kit - Shock Linkage 33D-W002E-00-00 33D-W002E-00-00 33D-W002E-00-00

Bearing Kit - Swingarm Pivot

Clutch Kit

BR9-W002C-00-00

B7B-W001G-00-00

BR9-W002C-00-00

BAJ-W001G-10-00

BR9-W002C-00-00

BAJ-W001G-10-00

*A=10W-40, 10W-50, 20W-50 or 15W-50 OVER 40°F

’24 MODEL GENUINE SERVICE

YAMALUBE EFI FULL-SYNTHETIC

OIL CHANGE KIT- OFF ROAD

Kit includes:

Yamalube Hi-Performance 10W-40 Full Synthetic Oil

Yamaha Genuine Parts

Oil filter

Drain bolt gaskets

O-rings

LUB-OFFCG-KT-15

YAMALUBE S1 FORK SUSPENSION OIL

Excellent low temperature flow-ability and reduced oil friction at low temperatures 907-93380-49-00

Quality Care Lubricant

YAMACOAT

• High-quality plastic coating

• Spray underneath fenders to limit mud from sticking

• Makes cleaning off mud and dirt easier

• Maintains & restores the factory color of your plastic

ACC-YAMAC-OA-TC (10.5 oz Can, Qty. 12*)

YAMACLEAN® PRO-WASH SPRAY

• Ready to use spray wash

• Biodegradable – rinses clean

• For use on all Yamaha products

ACC-YAMAC-PW-SP (32 oz Bottle, Qty. 12*)

ACC-YAMAC-PW-GL (Concentrate, 1 Gallon Bottle, Qty. 4*)

Additives

FUEL MED RX

• Locks in fuel potency and helps prevent fuel oxidation and phase separation

• Prevents build up of gums and varnishes that hurt engine performance

• Protect against metal corrosion caused by ethanol fuel

ACC-FUELM-RX-04 (3.2 oz Bottle, Qty. 48*)

ACC-FUELM-RX-08 (8 oz Dual Chamber Bottle, Qty. 12*) (Shown)

ACC-FUELM-RX-GL (1 Gallon, Qty. 4*)

ENGINE MED RX

• Helps improve overall performance by de-carbonizing combustion chambers and internal engine parts

• Provides corrosion protection caused by ethanol fuels

• Continuous treatment recommended

ACC-ENGIN-RX-08 (8 oz Dual Chamber Bottle, Qty. 12*)

LUBEZALL

• High-quality synthetic grease w/PTFE

• Very slippery material

• Highly resistant to heat and friction

• Great for lubricating control cables

ACC-LUBZA-LL-00 (11 oz, Qty. 12*)

BRAKE FLUID

• High-quality hydraulic DOT 4 brake fluid

• Only brake fluid recommended for use in Yamaha products

ACC-BRAKE-FL-UD (8 oz, Qty. 12*)

Maintenance

YAMACOOL® HIGH-PERFORMANCE ANTIFREEZE

• A specially formulated ethylene glycol-based antifreeze

• 60/40 ratio coolant/water mixture

• Pre-blended; Ready to use

ACC-YAMAC-BL-32 (1 Quart Bottle, Qty. 12*)

FULL SYNTHETIC CHAIN LUBE

• High-quality synthetic based chain lube extends the life of your chains and sprockets

• Sprays on clear and is long lasting

• Resists water and prevents corrosion

• For use on all on-road & off-road motorcycles drive chains; including O-ring chains

ACC-SYNCH-AI-NL (11 oz, Qty. 12*)

FOAM AIR FILTER OIL

• Petroleum-based foam air filter oil

• Helps protect against dust, dirt, and water from entering the intake tract

• Synthetic formula maximizes performance and extends the life of your engine

ACC-FOAMF-LT-ER (16 oz, Qty. 12*)

GYTR® BILLET CLUTCH BASKET

GYT-5XF56-10-00

GYTR® BILLET CLUTCH COVER

GYT-5XF35-10-AL

GYTR® BILLET CLUTCH INNER HUB

GYT-5XF56-40-00

GYTR® BILLET CLUTCH PRESSURE PLATE

GYT-5XD56-20-00

GYTR® PERFORMANCE HIGH-FLOW AIR FILTER

BCR-E41C0-V0-00

GYTR® RADIATOR BRACE

B4X-E24C0-V0-00

GYTR® FLYWHEEL

GYT-5NX97-50-50

GYTR® YZ250 BILLET IGNITION COVER

BCR-E54G0-V0-00

Performance / Protection

GYTR® FLYWHEEL

This complete flywheel assembly features an increase in inertia mass that smoothens the power delivery. Helps get power to the ground and keep your momentum up through corners and tricky sections, resulting in faster lap times and more race wins. Easy to install, allowing you the opportunity to change flywheels for different types of riding. Adds 8.04 oz for an inertia mass of 5.76 kg-cm². NOTE: Flywheels are measured by inertia weights because the effect of the weight differs depending on where it is in relation to the center of the crank. So a 4 oz and 6 oz weight might have the same effect depending on where they are positioned in relation to the center of the crank.

Fits ’03-’25 YZ250; ’16-’25 YZ250X GYT-5NX97-50-50

GYTR® PERFORMANCE HIGH-FLOW AIR FILTER

High-flow, two-layer foam filter offers optimized filtration while maximizing airflow. Increases performance. Filter is completely washable and reusable. Service with Yamaha Genuine Foam Filter Oil. This accessory is restricted to closed-course competition use.

Fits ’97-’25 YZ250; ’16-’25 YZ250X BCR-E41C0-V0-00

GYTR® BILLET IGNITION COVER

The GYTR Ignition Cover is precision-machined from 6061aluminum to provide added protection and styling over the OE plastic cover. Features a machined GYTR logo and is exceptionally durable with a hard anodized finish. Includes a replacement OE gasket and hex head flange bolts to replace OE Phillips® head screws.

Fits ’16-’25 YZ250; ’16-’25 YZ250X BCR-E54G0-V0-00

GYTR® BILLET CLUTCH COVER

The GYTR Billet Clutch Cover is precision-machined from the highest grade of aluminum, then hard anodized to achieve an exceptionally hard, wear-resistant surface for amazing race-proven durability.

Fits ’01-’25 YZ250; ’20-’25 YZ250X

GYT-5XF35-10-AL

GYTR® BILLET CLUTCH PRESSURE PLATE

Fits ’05-’25 YZ250; ’16-’25 YZ250X

GYT-5XD56-20-00

GYTR® BILLET CLUTCH INNER HUB

The GYTR Billet Clutch Inner Hub is precision-machined from the highest grade of aluminum, then hard anodized to achieve an exceptionally hard, wear-resistant surface for amazing race-proven durability. Additional oil passages help improve clutch performance and contribute to weight reduction and less rotational mass for quicker engine acceleration performance.

Fits ’01-’25 YZ250; ’16-’25 YZ250X GYT-5XF56-40-00

GYTR® BILLET CLUTCH BASKET

Fits ’01-’25 YZ250; ’16-’25 YZ250X

GYT-5XF56-10-00

GYTR® STAINLESS STEEL BRAIDED BRAKE LINE KIT

These top-quality brake lines are designed to not fatigue even under extreme conditions.

Fits ’09-’25 YZ250; ’16-’25 YZ250X

5XC-F58E0-V0-00 (Front)

Fits ’09-’22 YZ250; ’16-’22 YZ250X

5XC-F58A0-V0-00 (Rear)

GYTR® PLASTIC CHAIN GUIDE

This ultra-durable UHMWPE plastic guide is designed to flex, not bend, in the event of impact.

Fits ’13-’25 YZ250; ’16-’25 YZ250X 17D-F21E0-V1-00

GYTR® RADIATOR BRACE

The GYTR Radiator Braces are constructed of an ultrastrong lightweight 5052 aluminum with a center steel support bar for strength and is stamped with the GYTR logo. Does not require radiator removal for installation and includes 8 mm hex-head hardware and all necessary mounting hardware.

Fits ’16-’25 YZ250; ’16-’25 YZ250X

B4X-E24C0-V0-00

GYTR® MOTORCYCLE COVER

Keep your YZ protected from dust at the track or in your garage with this Yamaha cover. The cover is a traditional Yamaha racing blue color featuring the GYTR, Yamalube, and bLU cRU® logos. Made out of a lightweight material that can be quickly rolled up into the conveniently attached storage bag, the cover is water-resistant and equipped with a drawstring at the bottom to keep the cover in place. NOTE: Recommended for storage use only; not for trailering or transport.

Fits all YZ Models except YZ85 and YZ65 1SL-F81A0-V0-00

GYTR® 20 OIL FILL CAP

Anodized 6061 billet aluminum plug replaces stock plastic cap.

Fits ’06-’25 YZ250; ’15-’24 YZ250X GYT-2S235-01-00

Protection / Controls / Genuine Service Parts

GYTR® BRAKE LINE PINCH

This pinch replaces the stock steel pinch with a blue anodized billet aluminum piece.

Fits ’06-’25 YZ250; ’16-’25 YZ250X

GYT-1P818-15-00

5XC-F72A0-V0-00

WHEEL ASSEMBLY

The wheel assemblies for the YZ series include the hub, bearing, oil seal, spokes, rim, brake disc, and sprocket.

Fits ’23-’24 YZ250

BCR-25102-10-00 (Front)

Fits ’22 YZ250

BCR-25102-00-00 (Front)

Fits ’23 YZ250X

BRY-25102-00-00 (Front)

Fits ’21-’22 YZ250X

B0V-25102-00-00 (Front)

Fits ’22-’24 YZ250

BCR-25302-00-00 (Rear)

Fits ’23-’24 YZ250X

BEX-25302-10-00 (Rear)

Fits ’21-’22 YZ250X

BF1-25302-40-00 (Rear)

YAMAHA GENUINE FRONT FORK SEAL KIT

Fits ’22-’24 YZ250; ’23-’24 YZ250X

BCR-W003B-00-00

Fits ’21 YZ250; ’21-’22 YZ250X

B1B-W003B-00-00

Fits ’17-’20 YZ250; ’16-’20 YZ250X

17D-W003B-00-00

Fits ’04-’14 YZ250

1C3-W003B-00-00

Fits ’99-’03 YZ250

5ET-W003B-00-00

YAMAHA GENUINE CLUTCH PLATE KIT

These complete Yamaha Genuine Clutch Kits include the plates, springs, and gaskets, ready to install. Refer to service manual for installation instructions.

Fits ’21-’24 YZ250

B9U-W001G-00-00

Fits ’23-’24 YZ250X

BRY-W001G-00-00

Fits ’16-’22 YZ250X

BF1-W001G-00-00

YAMAHA GENUINE BEARING KITS

Yamaha Genuine Bearing Kits come with all of the components needed to rebuild the swingarm pivot, shock linkage, and shock bearings. Kits include all of the original equipment bearings, seals, O-rings, and collars your bike came with. The bearings are O-ring-sealed to prevent intrusion of dirt, mud, and water and are made of top quality materials.

Fits ’07-’24 YZ250; ’16-’24 YZ250X

1HC-W002C-00-00 (Swingarm Pivot Bearing Kit)

Fits ’21-’24 YZ250; ’21-’24 YZ250X

B1B-W002E-00-00 (Shock Linkage Bearing Kit)

Fits ’07-’24 YZ250; ’16-’24 YZ250X

1SS-W002G-00-00 (Shock Bearing Kit)

Fits ’20 YZ250; ’20 YZ250X 1SR-W002E-00-00 (Shock Linkage Bearing Kit)

YAMAHA GENUINE 2-STROKE PISTON KITS

Kit includes a high quality forged aluminum piston, ring, circlips, and wrist pin. Small upper rod bearing may be required (sold separately). Complete OEM Top End Gasket Kits available for most models (sold separately). Kit shown here may differ slightly depending on application.

Fits ’09-’24 YZ250; ’16-’24 YZ250X 1P8-11630-00-00

YAMAHA GENUINE BRAKE PADS

Fits ’22-’24 YZ250; ’23-’24 YZ250X

B2W-25805-00-00 (Front)

1C3-W0046-50-00 (Rear)

Fits ’17-’21 YZ250; ’17-’22 YZ250X

B29-25805-01-00 (Front)

Fits ’11-’21 YZ250; ’16-21 YZ250X

1C3-W0046-10-00 (Rear)

Genuine Service Parts / Yamalube

YAMAHA GENUINE CHAIN AND SPROCKET KIT

Factory assembled, ready for installation and comes complete with chain, front sprocket and rear sprocket.

Fits ’22-’24 YZ250

BCR-W001A-00-00

Fits ’23-’24 YZ250X

BRY-W001A-00-00 Fits ’21-’22 YZ250X

BF1-W001A-10-00

YAMAHA GENUINE OILS

Engine Oil Grade

’24 MODEL GENUINE SERVICE PARTS

YZ250

2R (Premix 30:1)

YZ250X

2R (Premix 30:1)

Transmission Oil Capacity 0.79 US QT (0.75L) 0.79 US QT (0.75L)

Transmission Oil Grade ACC-TRANS-PL-US ACC-TRANS-PL-US

YAMAHA GENUINE PARTS

Spark Plug

BR8-EG000-00-00

B2W-25805-00-00 Air Cleaner

Front Brake Pad Kit (Order Qty)

Rear Brake Pad Kit (Order Qty)

Drive Chain

Front Sprocket

Rear Sprocket

Front Fork Seal Kit

Fork Oil Seal

Fork Dust Seal

Bearing Kit - Shock Linkage

Bearing Kit - Swingarm Pivot

Clutch Kit

4XM-14451-01-00

B2W-25805-00-00 (1)

4XM-14451-01-00

B2W-25805-00-00 (1)

1C3-W0046-50-00 (1) 1C3-W0046-50-00 (1)

9Y582-60113-00

9383E-14215-00

B2W-25450-00-00

BCR-W003B-00-00

B29-23145-00-00

5XE-23144-L0-00

B1B-W002E-00-00

1HC-W002C-00-00

B9U-W001G-00-00

9Y582-50113-00

9383E-14215-00

B2W-25450-00-00

BCR-W003B-00-00

B29-23145-00-00

5XE-23144-L0-00

B1B-W002E-00-00

1HC-W002C-00-00

BRY-W001G-00-00

GYTR® BILLET CLUTCH PRESSURE PLATE

GYT-5XC56-20-00

GYTR® BILLET CLUTCH BASKET

GYT-1C356-10-00

GYTR® BILLET CLUTCH INNER HUB

GYT-5XE56-40-00

GYTR® BILLET CLUTCH COVER

GYT-1C335-10-AL

GYTR® YZ125 PERFORMANCE KIT

B4X-E9500-V0-00

GYTR® RADIATOR BRACE

B4X-E24C0-V0-00

GYTR® BILLET IGNITION COVER

B4X-E54G0-V0-00

GYTR® PERFORMANCE

HIGH-FLOW AIR FILTER

BCR-E41C0-V0-00

Performance / Protection

GYTR® YZ125 PERFORMANCE KIT

The GYTR YZ125 Performance Kit is a comprehensive bolt-on engine kit developed for racers looking to increase power and improve throttle response while maintaining strict Yamaha reliability standards. NOTE: Requires minimum 91-octane or higher fuel. Yamaha jetting specification and race fuel is recommended. This accessory is restricted to closed-course competition use.

Fits ’22-’25 YZ125; ’23-’25 YZ125X

B4X-E9500-V0-00

GYTR® PERFORMANCE HIGH-FLOW AIR FILTER

High-flow, two-layer foam filter offers optimized filtration while maximizing airflow. Increases performance. Filter is completely washable and reusable. Service with Yamalube Foam Filter Oil (ACC-FOAMF-LT-ER), sold separately. This accessory is restricted to closed-course competition use.

Fits ’05-’25 YZ125; ’20-’25 YZ125X BCR-E41C0-V0-00

GYTR® BILLET CLUTCH COVER

The GYTR Billet Clutch Cover is precision-machined from aerospace-quality aluminum alloys with a unique hard coating. This provides superior performance and clutch feel, as well as excellent component durability.

Fits ’05-’25 YZ125; ’20-’25 YZ125X

GYT-1C335-10-AL

GYTR® BILLET CLUTCH PRESSURE PLATE

Fits ’00-’25 YZ125; ’20-’25 YZ125X GYT-5XC56-20-00

GYTR® BILLET IGNITION COVER

The GYTR Ignition Cover is precision-machined from 6061 aluminum to provide added protection and styling over the OE plastic cover. Features a machined GYTR logo and is exceptionally durable with a hard anodized finish. Includes a replacement OE gasket and hex head flange bolts to replace OE Phillips® head screws.

Fits ’15-’25 YZ125; ’20-’25 YZ125X B4X-E54G0-V0-00

GYTR® BILLET CLUTCH INNER HUB

Fits ’12-’25 YZ125; ’20-’25 YZ125X GYT-5XE56-40-00

GYTR® BILLET CLUTCH BASKET

Fits ’05-’25 YZ125; ’20-’25 YZ125X

GYT-1C356-10-00

GYTR® STAINLESS STEEL BRAIDED BRAKE LINE KIT

These top-quality brake lines are designed to not fatigue even under extreme conditions.

Fits ’09-’25 YZ125; ’20-’25 YZ125X

5XC-F58E0-V0-00 (Front)

Fits ’09-’25 YZ125; ’20-’23 YZ125X

5XC-F58A0-V0-00 (Rear)

GYTR® PLASTIC CHAIN GUIDE

This ultra-durable UHMWPE plastic guide is designed to flex, not bend, in the event of impact.

Fits ’08-’25 YZ125; ’20-’25 YZ125X 17D-F21E0-V1-00

mounting hardware.

Fits ’15-’25 YZ125; ’20-’25 YZ125X B4X-E24C0-V0-00

GYTR® MOTORCYCLE COVER

Keep your YZ protected from dust at the track or in your garage with this Yamaha cover. The cover is a traditional Yamaha racing blue color featuring the GYTR, Yamalube, and bLU cRU® logos. Made out of a lightweight material that can be quickly rolled up into the conveniently attached storage bag, the cover is water-resistant and equipped with a drawstring at the bottom to keep the cover in place. NOTE: Recommended for storage use only; not for trailering or transport.

Fits all YZ Models except YZ85 & YZ65 1SL-F81A0-V0-00

GYTR® BRAKE LINE PINCH

This pinch replaces the stock steel pinch with a blue anodized billet aluminum piece.

Fits ’06-’25 YZ125; ’20-’25 YZ125X GYT-1P818-15-00 0

5XC-F72A0-V0-00

20 OIL FILL CAP

Anodized 6061 billet aluminum plug replaces stock

Fits ’06-’25 YZ125; ’15-’25 YZ125X

GYT-2S235-01-00

GYTR® MAGNETIC OIL DRAIN PLUG

Fits ’00-’25 YZ125; ’20-’25 YZ125X 18P-E51C0-U0-00

WHEEL ASSEMBLY

The wheel assemblies for the YZ series include the hub, bearing, oil seal, spokes, rim, brake disc, and sprocket.

Fits ’23-’24 YZ125

B4X-25102-10-00 (Front)

Fits ’22 YZ125

B4X-25102-00-00 (Front)

Fits ’23-’24 YZ125X

BRY-25102-00-00 (Front)

Fits ’21 YZ125; ’21-’22 YZ125X

B0V-25102-00-00 (Front)

Fits ’22-’24 YZ125

B4X-25302-00-00 (Rear)

Fits ’21 YZ125

B0V-25302-00-00 (Rear)

Fits ’22-’24 YZ125X

B4X-25302-00-00 (Rear)

Fits ’21-’22 YZ125X

BF1-25302-40-00 (Rear)

YAMAHA GENUINE PISTON REBUILT KIT

The Yamaha Genuine Piston Rebuilt Kits feature a highquality forged aluminum piston, proven OEM fitment, and pass Yamaha’s durability and reliability standards. This kit includes: piston, ring, circlips, wrist pin, gaskets, seals, and O-rings, all of the parts needed to rebuild the top end of your machine. Designed with convenience and cost savings. Sample image – actual kit contents vary by model.

Fits ’21-’24 YZ125; ’23-’24 YZ125X

B4X-WB033-00-A0

Fits ’22 YZ125X

1C3-WB033-00-A0

YAMAHA GENUINE BEARING KITS

These Yamaha Genuine Bearing Kits come with all of the components needed to rebuild the swingarm pivot, shock linkage, and shock bearings. Kits include all of the original equipment bearings, seals, O-rings, and collars your bike came with. These bearings are O-ring-sealed to prevent intrusion of dirt, mud, and water and are made of top quality materials.

Fits ’21-’24 YZ125; ’21-’24 YZ125X

B1B-W002E-00-00 (Shock Linkage Bearing Kit)

Fits ’11-’24 YZ125; ’20-’24 YZ125X

1SS-W002G-00-00 (Shock Bearing Kit)

Fits ’11-’24 YZ125; ’20-’24 YZ125X

1C3-W002C-00-00 (Swingarm Pivot Bearing Kit)

YAMAHA GENUINE CLUTCH PLATE KIT

Complete Yamaha Genuine Clutch Kits include the plates, springs, and gaskets, ready to install. Refer to service manual for installation instructions.

Fits ’22-’24 YZ125; ’23-’24 YZ125X

B4X-W001G-00-00

Fits ’11-’21 YZ125; ’20-’22 YZ125X 1C3-W001G-00-00

YAMAHA GENUINE FORK SEAL KIT

Fits ’22-’24 YZ125; ’23-’24 YZ125X

BCR-W003B-00-00

Fits ’15-’20 YZ125; ’20 YZ125X 17D-W003B-00-00

YAMAHA GENUINE BRAKE PADS

Fits ’22-’24 YZ125; ’23-’24 YZ125X

B2W-25805-00-00 (Front)

Fits ‘17-’21 YZ125; ’20-’22 YZ125X

B29-25805-01-00 (Front)

Fits ’11-’24 YZ125; ’20-’24 YZ125X

1C3-W0046-50-00 (Rear)

Genuine Service Parts / Yamalube

YAMAHA GENUINE CHAIN AND SPROCKET KIT

Factory assembled, ready for installation and comes complete with chain, front sprocket, and rear sprocket.

Fits ’22-’24 YZ125

B4X-W001A-00-00

Fits ’23-’24 YZ125X

BRX-W001A-00-00

Fits ’21-’22 YZ125X

B1B-W001A-00-00

YAMAHA GENUINE OILS

Engine Oil Grade

Transmission

Capacity

’24 MODEL GENUINE SERVICE PARTS

2R (Premix 30:1)

Transmission Oil Grade ACC-TRANS-PL-US

YAMAHA GENUINE PARTS

Spark Plug

2R (Premix 30:1)

BR9-EIX00-00-00

BR9-EIX00-00-00 Air Cleaner

Front Brake Pad Kit (Order Qty)

Rear Brake Pad Kit (Order Qty)

Drive Chain

Front Sprocket

Rear Sprocket

Front Fork Seal Kit

Fork Oil Seal

Fork Dust Seal

Bearing Kit - Shock Linkage

Bearing Kit - Swingarm Pivot

Clutch Kit

4XM-14451-01-00

B2W-25805-00-00 (1)

1C3-W0046-50-00 (1)

9Y582-60111-00

9383B-13218-00

B2W-25449-00-00

BCR-W003B-00-00

B29-23145-00-00

5XE-23144-L0-00

B1B-W002E-00-00

1C3-W002C-00-00

B4X-W001G-00-00

4XM-14451-01-00

B2W-25805-00-00 (1)

1C3-W0046-50-00 (1)

9Y582-50113-00

9383B-13218-00

B2W-25450-00-00

BCR-W003B-00-00

B29-23145-00-00

5XE-23144-L0-00

B1B-W002E-00-00

1C3-W002C-00-00

B4X-W001G-00-00

Performance / Protection

NEW! GYTR® YZ85 PERFORMANCE KIT

The GYTR YZ85 Performance Kit is a comprehensive bolt-on engine kit developed for racers looking to increase power and torque, improve throttle response, and maintain Yamaha reliability standards. NOTE: Requires minimum 91-octane or higher fuel. Yamaha Jetting specification and race fuel is recommended This accessory is restricted to closed-course competition use.

Fits ’19-’25 YZ85; ’22-’25 YZ85LW

B0G-E9500-V0-00

GYTR® AIR FILTER

The GYTR Air Filter features a two-layer, multi-density foam construction that optimizes air filtration and maintains factory performance. Recommended for use with Yamaha Genuine Foam Filter Oil. This accessory is restricted to closed-course competition use.

Fits ’02-’25 YZ85; ’22-’25 YZ85LW

B4B-E41C0-V0-00

Fits ’18-’25 YZ65

BR8-E41C0-V1-00

GYTR® BILLET CLUTCH PRESSURE PLATE

Precision-machined from the highest grade of aluminum, then hard anodized to achieve an exceptionally hard, wear-resistant surface for amazing race-proven durability. Additional oil passages help improve clutch performance and also contribute to weight reduction and less rotational mass for quicker engine acceleration performance.

Fits ’09-’25 YZ85; ’22-’25 YZ85LW

GYT-5PA56-20-00

Fits ’18-’25 YZ65

BR8-E63B0-V0-00

GYTR® BILLET CLUTCH INNER HUB

Fits ’05-’25 YZ85; ’24-’25 YZ85LW

GYT-5PA56-40-00

Fits ’18-’25 YZ65

BR8-E63C0-V0-00

GYTR® BILLET CLUTCH COVER

Precision-machined from the highest grade of aluminum and then anodized to achieve an exceptionally hard, wear-resistant surface.

Fits ’05-’25 YZ85; ’22-’25 YZ85LW; ’18-’25 YZ65

GYT-5PA35-10-AL

GYTR® BILLET CLUTCH BASKET

Precision-machined from the highest grade of aluminum and then anodized to achieve an exceptionally hard, wear-resistant surface. This clutch basket provides amazing, race-proven durability.

Fits ’13-’25 YZ85; ’22-’25 YZ85LW; ’18-’25 YZ65

GYT-5PA56-10-01

GYTR® 20 OIL FILL CAP

Anodized 6061 billet aluminum plug replaces stock plastic cap.

Fits ’02-’25 YZ85; ’22-’25 YZ85LW; ’18-’25 YZ65

GYT-2S235-01-00

GYTR® YZ65 MX GLIDE PLATE

The GYTR MX Glide Plate is flexible, lightweight and low drag coefficient alternative to aluminum glide plates when needing a smooth surface for “gliding” over obstacles. Constructed of high-density polyethylene (HDPE). Water pump and ignition cover protection integrated into glide plate design.

Fits ’18-’25 YZ65

BR8-F14B0-V0-00

YZ65 AIR BOX WASH CAP

Protects intake from dust or water intrusion when cleaning the bike. Eases air box cleaning and leaves no gaps that would allow water to penetrate when used. Features a large, tool-less knob that is made of ABS plastic with a fully sealed rubber gasket on the leading edge. Easy to install and remove.

Fits ’18-’25 YZ65

BR8-E41E0-V0-00

GYTR® RADIATOR BRACES

The GYTR Radiator Braces are constructed of lightweight aluminum for an optimized strength-toweight ratio. Thinner and lighter material is possible due to the rolled edges that provide extra strength. Structural ribs run along the sides of the braces to limit radiator damage from side impact. All required mounting hardware included. No trimming of the plastics is required to install.

Fits ’18-’25 YZ65

BR8-E24C0-V0-00

GYTR® YZ65 BLUE ACCESSORY KIT

This GYTR branded kit has been designed and developed to give you true Yamaha Racing style and function. Kit includes: rear brake clevis, offset axle blocks, oil fill cap, handlebar lever brackets, steering stem nut, fuel tank vent, front and rear brake reservoir covers, and rim lock towers.

Fits ’18-’25 YZ65

BR8-F84AB-V0-00

Genuine Service Parts

WHEEL ASSEMBLY

The wheel assemblies for the YZ series include the hub, bearing, oil seal, spokes, rim, brake disc, and sprocket.

Fits ’20-’24 YZ85

B4B-25102-00-00 (Front )

Fits ’22-’24 YZ85LW

B0G-25102-00-00 (Front)

Fits ’20-’24 YZ65

BR8-25102-00-00 (Front)

Fits ’20-’24 YZ85

B4B-25302-00-00 (Rear)

Fits ’22-’24 YZ85LW

B0G-25302-00-00 (Rear)

Fits ’20-’22 YZ65

BR8-25302-00-00 (Rear)

YAMAHA GENUINE TOP END GASKET KIT

Fits ’19-’20 YZ85

B4B-W0001-00-00 Fits ’06-’18 YZ85

5PA-W0001-00-00

YAMAHA GENUINE CLUTCH PLATE KIT

These complete Yamaha Genuine Clutch Kits include the plates, springs, and gaskets, ready to install. Refer to service manual for installation instructions.

Fits ’21-’24 YZ85; ’22-’24 YZ85LW

B4B-W001G-00-00

Fits ’05-’20 YZ85

5PA-W001G-00-00

Fits’18-’24 YZ65

BR8-W001G-00-00

YAMAHA GENUINE 2-STROKE PISTON KITS

These Yamaha Genuine 2-Stroke Piston Kits include a high quality forged aluminum piston, ring, circlips, and wrist pin. Complete OEM Top End Gasket Kits available for most models (sold separately). Kit shown here may differ slightly depending on application.

Fits ’19-’24 YZ85; ’22-’24 YZ85LW

5PA-11630-10-00

Fits ’18 YZ85

5PA-11630-00-00

Fits ’18-’24 YZ65

BR8-11630-00-00

YAMAHA GENUINE FORK SEAL KITS

Fits ’21-’24 YZ85; ’22-’24 YZ85LW; ’21-’24 YZ65

BR8-W003B-00-00

Fits ‘02-’20 YZ85; ’22 YZ85LW 4ES-W003B-00-00

YAMAHA GENUINE BEARING KITS

Fits ’02-’24 YZ85; ’22-’24 YZ85LW; ’18-’24 YZ65

1SN-W002C-00-00 (Swingarm Pivot Bearing)

Fits ’19-’24 YZ85; ’22-’24 YZ85LW B4B-W002E-00-00 (Shock Linkage Bearing Kit)

YAMAHA GENUINE BRAKE PADS

Fits ’11-’24 YZ85; ’22-’24 YZ85LW

5PA-W0045-00-00 (Front)

5PA-W0046-50-00 (Rear)

Fits ’18-’24 YZ65

5PA-W0045-00-00 (Front)

BR8-25806-00-00 (Rear)

YAMAHA GENUINE CHAIN AND SPROCKET KIT

Factory assembled, ready for installation and comes complete with chain, front sprocket, and rear sprocket.

Fits ’21-’24 YZ85

B4B-W001A-10-00

Fits ’22-’24 YZ85 LW

B0G-W001A-00-00

Fits ’21-’24 YZ65

BR8-W001A-10-00

’24 MODEL GENUINE SERVICE PARTS

YAMAHA GENUINE OILS YZ85 YZ65

YAMAHA GENUINE PARTS

Spark Plug

BR1-0EG00-00-00 94702-00357-00

Air Cleaner 5PA-14451-02-00 BR8-14451-01-00

Front Brake Pad Kit (Order Qty)

Rear Brake Pad Kit (Order Qty)

5PA-W0045-00-00 (1) 5PA-W0045-00-00 (1)

5PA-W0046-50-00 (1) BR8-25806-00-00 (1)

Drive Chain 9Y582-43117-00 9Y582-48113-00

Front Sprocket 9382A-14227-00 9381A-14243-00

Rear Sprocket

Front Fork Seal Kit

5PA-25446-00-00 BR8-25447-00-00

BR8-W003B-00-00 BR8-W003B-00-00

Fork Oil Seal 4ES-23145-00-00 4ES-23145-00-00

Fork Dust Seal 4ES-23144-00-00 4ES-23144-00-00

Bearing Kit - Shock Linkage

B4B-W002E-00-00 1SN-W002C-00-00

Bearing Kit - Swingarm Pivot 1SN-W002C-00-00 1SN-W002C-00-00

Clutch Kit

B4B-W001G-00-00 BR8-W001G-00-00

GYTR® HIGH FLOW AIR FILTER

The GYTR TT-R High Flow Air Filter was developed to be used with the stock carburetor. GYTR Jet Kit recommended with filter installation. Pre-filter included. This accessory is restricted to closed-course competition use.

Fits ’06-’25 TT-R50E

GYT-1P695-01-00

GYTR® HIGH FLOW AIR FILTERS

The GYTR TT-R High Flow Air Filter was developed to be used with or without the Performance Carburetor Kit (discontinued). GYTR Jet Kit recommended with filter installation on stock carburetor. Pre-filter included. This accessory is restricted to closed-course competition use.

Fits ’08-’25 TT-R110E

GYT-5B695-00-00 (for stock carb configuration)

Fits ’08-’25 TT-R110E

GYT-5B695-10-00 (for performance carb configuration)

GYTR® PRE-FILTER

Less maintenance in dusty conditions. Pre-filters dirt with no critical airflow or power loss.

Fits ’08-’25 TT-R110E

GYT-5B695-11-BL

GYTR® JET KIT

Adjust your stock carburetor for competition conditions with this GYTR Jet Kit. Designed to be used in conjunction with the GYTR High Flow Air Filter. This accessory is restricted to closed-course competition use.

Fits ’08-’25 TT-R110E

GYT-5B698-00-00

GYTR® ALUMINUM GLIDE PLATE

This plate helps glide your bike over obstacles and provide added protection for the lower frame and engine components.

Fits ’08-’25 TT-R110E

GYT-5B634-00-AL

GYTR® 14 TIMING COVER PLUG

This anodized 6061 billet aluminum timing plug replaces the stock plastic plug.

Fits ’08-’24 TT-R110E

5XC-E51B0-V0-00 (Black)

GYTR® 20 OIL FILL CAP

This anodized 6061 billet aluminum plug replaces the stock plastic cap.

Fits ’06-’25 TT-R230

GYT-2S235-01-00 (Blue)

YAMAHA GENUINE CLUTCH PLATE KIT

Complete Yamaha Clutch Kits include the plates, springs, and gaskets, ready to install. Refer to service manual for installation instructions.

Fits ’21-’24 TT-R110E

B51-W001G-00-00

YAMAHA GENUINE CHAIN AND SPROCKET KIT

Factory assembled, ready for installation and comes complete with chain, front sprocket, and rear sprocket.

Fits ’21-24 TT-R110E

B51-W001A-00-00

YAMAHA GENUINE OILS & FILTERS

YAMAHA GENUINE FORK SEAL KIT

Fits ’21-’24 TT-R110E

B51-W003B-00-00

(1)

Rear Brake Shoe (Order Qty) 5HH-F5330-00-00 (1) 4KN-W253E-11-00 (1) 4BE-W253E-00-00 (1) 1P6-W253A-00-00 (1)

’24 MODEL GENUINE SERVICE PARTS

TW200 LUGGAGE RACK

This convenient luggage rack can hold your light load of riding essentials.

Fits All TW200

ABA-2JY51-00-00

GYTR® 20 OIL FILL CAP

This anodized 6061 billet aluminum plug replaces the stock plastic cap.

Fits ’06-’24 TW200

GYT-2S235-01-00 (Blue)

GYTR® 14 TIMING PLUG

This anodized 6061 billet aluminum timing plug replaces the stock plastic plug.

Fits ’08-’24 XT250; ’06-’24 TW200 5XC-E51B0-V0-00 (Black)

YAMAHA GENUINE CLUTCH PLATE KIT

Complete Yamaha Clutch Kits include the plates, springs, and gaskets, ready to install. Refer to service manual for installation instructions.

Fits ’21-’24 XT250

B1U-W001G-00-00

Fits ’21-’24 TW200

B75-W001G-00-00

YAMAHA GENUINE FORK SEALS KITS

Fits ’21-’24 XT250

B1U-W003B-00-00

Fits ’21-’24 TW200

B75-W003B-00-00

YAMAHA GENUINE BRAKE PADS

Fits ’11-’24 XT250

3C5-W0045-00-00

Fits ’13-’24 TW200

3C5-25805-00-00 (Front)

Fits ’13-’24 XT250

3C5-25806-00-00 (Rear)

YAMAHA GENUINE OILS & FILTERS

YAMAHA GENUINE PARTS

Battery

Spark Plug

Air Cleaner

Front Brake Pad Kit (Order Qty)

Rear Brake Pad Kit (Order Qty)

Rear Brake Shoe Kit (Order Qty)

Front Sprocket

Rear Sprocket

Drive Chain

Fork Oil Seal

Fork Dust Seal

’24 MODEL GENUINE SERVICE PARTS

YTZ-7SHE0-00-00

DR7-EA000-00-00

5XT-14451-00-00

3C5-W0045-00-00 (1)

3C5-25806-00-00 (1)

N/A

5XT-17460-00-00

3C5-25448-10-00

94581-36128-00

5JX-23145-00-00

5JX-23144-00-00

YB7-CA000-00-00

DR8-EA000-00-00

2JX-14451-00-00

3C5-25805-00-00 (1)

N/A

4KN-W253E-11-00 (1)

93823-14149-00

15A-25450-20-00

9Y582-51121-00

22W-23145-L0-00

54G-23144-00-00

Adventure touring

ALUMINUM SIDE CASES

BW3-F84B8-T0-00 (Left)

BW3-F84B8-V0-00 (Right)

SIDE CASE MOUNT

BW3-F84G0-V0-00

LOWERING KIT

BW3-F33A0-V0-00

LOW SEAT

Scan here to build your TÉNÉRÉ 700

BW3-F47C0-V0-00

TÉNÉRÉ 700 QUICK SHIFTER KIT

BNW-181A0-00-00

RADIATOR GUARD

BW3-E24D0-V0-00

ENGINE GUARD

BW3-F43B0-V0-00

BEH-F84R0-V0-00

TÉNÉRÉ 700 QUICK SHIFTER KIT

Derived from Yamaha Racing Technology, the Ténéré 700 Quick Shifter Kit provides seamless clutch-less up-shifts which improves acceleration and reduces rider fatigue.

Fits ’24 Ténéré 700

BNW-E81A0-V0-00

SKID PLATE

The Skid Plate helps protect your engine from small stones and other trail debris. Constructed with a lightweight yet durable 4 mm-thick aluminum that replaces the stock plastic skid plate.

Fits ’22-’24 Ténéré 700

BEH-F84R0-V0-00

LOWERING KIT

Confidence-inspiring for shorter riders looking to touch the ground. The suspension link kit provides 0.7" (18 mm) seat height reduction. When used in conjunction with the Low Seat (BW3- F47C0-V0-00), sold separately, there is a total 1.5" (38 mm) seat height reduction.

Fits ’21-’24 Ténéré 700

BW3-F33A0-V0-00

ENGINE GUARD

Heavy-duty, Ténéré 700-specific guards cover and help protect critical engine and body components. Designed using high-strength tubular steel construction with rugged adventure styling. Designed to work in conjunction with Fog Light Mounting Brackets (BW3-H54A3-V0-00), sold separately.

Fits ’21-’24 Ténéré 700

BW3-F43B0-V0-00

RADIATOR GUARD

Provides protection from rocks and other road debris while adding a custom touch to the overall look of the bike. Designed with a high-quality matte black and aluminum finish with expanded metal mesh. Includes the Ténéré 700 logo.

Fits ’21-’24 Ténéré 700

BW3-E24D0-V0-00

CHAIN GUIDE

YZ-inspired design, protects the chain from damage during off-road usage. Constructed of durable UHMWPE (Ultra High Molecular Weight Polyethylene) and designed to flex, not bend, in the event of impact.

Fits ’21-’24 Ténéré 700

BW3-F21G0-V0-00

MAIN STAND

Provides the ability to have the front and rear wheel off the ground for simplified cleaning and maintenance. Constructed with high-strength tubular steel and created with a solid design for easy and stable parking on pavement as well as off-road terrain.

Fits ’21-’24 Ténéré 700

BW3-F71A0-V0-00

RALLY SEAT

Replaces OE 2-piece seat with 1-piece flat rally seat that provides easier rider movement in off-road terrains. Taller than stock by approximately 1.6" (41 mm). Complete seat assembly provides a seamless installation. Not compatible with the Mono-Seat Rack (BW3-F48A0-V0-00).

Fits ’21-’24 Ténéré 700

BW3-F47C0-T0-00

LOW SEAT

Confidence-inspiring for shorter riders looking to touch the ground. Seat is 0.79" (20 mm) lower than stock and, when used in conjunction with the suspension Lowering Kit (BW3-F33A0-V0-00), sold separately, there is a total 1.5" (38 mm) seat height reduction. The cover material is designed to withstand the gnarliest adventure terrain and weather conditions. Complete seat assembly provides easy installation.

Fits ’21-’24 Ténéré 700

BW3-F47C0-V0-00

SIDE CASE MOUNT

Specifically engineered for the Ténéré 700, and required to install the Ténéré 700 Aluminum Side Cases. Constructed using a high-strength tubular steel and designed to withstand the most extreme off-road adventure. Includes all hardware to mount both right and left cases.

Fits ’21-’24 Ténéré 700

BW3-F84G0-V0-00

ALUMINUM SIDE CASES

Specially designed cases for Ténéré 700 to enhance the adventure functionality by allowing safe and secure storage of cargo on a commute to work or weekend adventure. Constructed with durable aluminum. Rightside capacity is 35 L; left-side capacity is 37 L. Four strap loops on each lid. Lock set (2PP-F81C0-V0-00), is recommended and sold separately. Side Case Mount (BW3-F84G0-V0-00) is required for installation and also sold separately.

Fits ’21-’24 Ténéré 700

BW3-F84B8-V0-00 (Left)

BW3-F84B8-T0-00 (Right)

ALUMINUM TOP CASE

Allows safe and secure storage of cargo on a commute to work or weekend adventure. Constructed with a durable aluminum, has a 42 L loading capacity and can store one full-face helmet. Key cylinder can be installed which can be operated by the motorcycle’s ignition key.

Top case not recommended for use in combination with side cases due to increased risk of overloading the motorcycle.

Fits ’21-’24 Ténéré 700

BW3-F84A8-V0-00

MONO-SEAT RACK

Replaces the OE passenger seat for convenient cargo storage. Easy installation allows the rider to switch between the rack and OE seat depending on preference. Removable with the original seat key. Features cut-outs on the sides to provide anchor points for cargo. Not compatible with the Rally Seat (BW3-F47C0-T0-00).

Fits ’21-’24 Ténéré 700

BW3-F48A0-V0-00

RE-KEYABLE LOCK

Includes one lock cylinder that can be matched to the ignition key. Direct fitment to right or left Aluminum Side Cases or Aluminum Top Case.

Fits ’21-’24 Ténéré 700 2PP-F81C0-V0-00

REAR RACK

Rear Carrier allows the attachment of 42 L Aluminum Top Case (BW3-F84A8-V0-00), sold separately. Designed specifically for Ténéré 700. Constructed with highstrength tubular steel.

Fits ’21-’24 Ténéré 700

BW3-F48D0-V0-00

LED FOG LIGHT KIT BY PIAA®

Improve your night vision by lighting up the trail or road with these LED fog lights. The 70 mm diameter lights provide 6000 Kelvin lighting output. Comes with handlebar-mounted switch. Designed for direct fitment, with two mounting options available, sold separately: Headlight Fog Light Mount (BW3-H54A3-T0-00) or Engine Guard Fog Light Mount (BW3-H54A3-V0-00).

Fits ’21-’24 Ténéré 700

BW3-H54A3-S0-00

ENGINE GUARD FOG LIGHT MOUNT

Mounting kit attaches to the Ténéré 700 Engine Guard (BW3-F43B0-V0-00), sold separately, for a clean, wellprotected look. Allows mounting of accessory PIAA® fog lights to accessory engine guard.

Fits ’21-’24 Ténéré 700

BW3-H54A3-V0-00

HEADLIGHT FOG LIGHT MOUNT

Mounting kit places the PIAA® fog lights underneath the headlight for a clean, well-protected look. Brackets bolt to the pre-drilled holes that come stock on the Ténéré 700.

Fits ’21-’24 Ténéré 700

BW3-H54A3-T0-00

LAST CHANCE! SKID PLATE

The plate helps protect your engine from small stones and other trail debris. Constructed from a lightweight yet durable 4 mm-thick aluminum construction. Protects the engine and frame and replaces the stock plastic skid plate.

Fits ’21 Ténéré 700

BW3-F84R0-V0-00

WORLD CROSSER SKID PLATE

The strong, 3 mm-thick, aluminum skid plate replaces the stock plastic skid plate. Helps protect your engine from small stones and other trail debris.

Fits ’12-’24 Super Ténéré

2BS-F84R0-V0-00

WORLD CROSSER TANK PAD

This tank pad provides protection for the fuel tank from scratches from zippers, buttons, and clasps. Unique Yamaha Genuine design based on the Super Ténéré concept model design. Emphasizes the Super Ténéré’s adventure styling.

Fits ’12-’24 Super Ténéré

23P-F41D0-S0-00

SUPER TÉNÉRÉ ENGINE GUARDS

The Super Ténéré Engine Guards are constructed of powder-coated steel and are designed to encompass critical engine components. These heavy-duty guards help minimize damage if the bike is accidentally dropped. Mounting hardware included. Super Ténéré Engine Guards cannot be used in conjunction with the previously available World Crosser Skid Plate Extension.

Fits ’12-’24 Super Ténéré 23P-F43B0-V0-00

V3 FUEL CAP BY VORTEX®

The V3 offers a new and improved style and design compared to the classic Vortex® design. Coarse threads for quick closures without cross-threading. Large finger tabs that are contoured for easy opening. Vent and chamber design helps stop leaks and contain any fuel that gets past the check valve. Safety lock switch to prevent any cap loosening. Quick, easy install with stock hardware. Uses stock fuel tank venting.

Fits ’12- ’24 Super Ténéré DBY-ACC56-24-56

SUPER TÉNÉRÉ LOWERED SEAT

This accessory seat is narrower and 1.3" (35 mm) lower than the stock seat which makes it easier for many riders to plant their feet on the ground. Constructed with a strong durable material that is designed to withstand the elements.

Fits ’12-’24 Super Ténéré 23P-F47C0-V0-00

BLACK ALUMINUM SIDE CASES

The Black Aluminum Side Cases are made with solid aluminum. Features four strap loops on the lid and uses accessory locks originally supplied with the motorcycle so the ignition key opens the cases. Has a large loading capacity with 35 L per side. Requires Side Case Mount Kit (2BS-F84G0-V0-00) for installation, sold separately.

Fits ’12-’24 Super Ténéré

2BS-F84B8-T0-00 (Right) 2BS-F84B8-V0-00 (Left)

SIDE CASE MOUNT KIT

The Side Case Mounts are comprised of strong powdercoated 18 mm steel tubes and are required for the Aluminum Side Cases (2BS-F84B8-T0-00) (Right) and (2BS-F84B8-V0-00) (Left)

Fits ’12-’24 Super Ténéré

2BS-F84G0-V0-00

BLACK ALUMINUM TOP CASE

Allows safe and secure storage of cargo on a commute to work or weekend adventure. Has a 42 L loading capacity and can store one full-face helmet. Includes a shock-absorbing soft internal mat. Uses accessory lock originally supplied with motorcycle so ignition key opens case. Top Case Mount (2BS-F84X0-V0-00), sold separately, required for installation.

Top case not recommended for use in combination with side cases due to increased risk of overloading the motorcycle.

Fits ’12-’24 Super Ténéré

2BS-F84A8-V0-00

RE-KEYABLE LOCK

Optional lock set for the accessory Top Cases and Side Cases (sold separately). Includes one lock cylinder and may be keyed to the bike’s ignition or other luggage for convenient 1-key operation, thus eliminating multiple keys. Dealer installation recommended.

Fits ’12-’24 Super Ténéré

2PP-F81C0-V0-00

TOP CASE MOUNT

Top Case Mount is comprised of high-quality anodized aluminum and is required to mount the Aluminum Top Case (2BS-F84A8-V0-00), sold separately.

Fits ’12-’24 Super Ténéré

2BS-F84X0-V0-00

SUPER TÉNÉRÉ REPLACEMENT KEY & LOCK SET

The Super Ténéré Replacement Key & Lock Set is essential for new side cases and top case if the original lock set is lost. Replacement locks are required if the original keys are lost.

Fits ’12- ’24 Super Ténéré 23P-28406-00-00 (1 Repl. Lock & 2 Keys) (Shown) 23P-28407-00-00 (3 Repl. Locks & 2 Keys)

LAST CHANCE! SUPER TÉNÉRÉ SIDE WIND DEFLECTORS

These 4mm-thick, hard-coated polycarbonate wind deflectors install on either side of the windscreen and optimize wind protection for more comfortable touring. Ideal for use with the accessory Yamaha Tall Windscreen. Easy to install. Mounting hardware included.

Fits ’14-’24 Super Ténéré 2BS-F83M0-V0-00

genuine service parts

YAMAHA GENUINE CLUTCH PLATE KIT

Complete Yamaha Clutch Kits include the plates, springs, and gaskets, ready to install. Refer to service manual for installation instructions.

Fits ’21-’24 Ténéré 700

1WS-W001G-10-00

Fits ’12-’24 Super Ténéré

23P-W001G-00-00

YAMAHA GENUINE BRAKE PADS

Fits ’21-’24 Ténéré 700

BW3-F5805-00-00 (Front)

BW3-F5806-00-00 (Rear)

Fits ’12-’24 Super Ténéré

2C0-25805-00-00 (Front)

1D7-W0046-00-00 (Rear)

YAMAHA GENUINE FORK SEALS KIT

Fits ’21-’24 Ténéré 700

BAU-W003B-00-00

Fits ’20-’24 Super Ténéré

2KB-W003B-00-00

YAMAHA GENUINE CHAIN AND SPROCKET KIT

Factory assembled, ready for installation and comes complete with chain, front sprocket and rear sprocket.

Fits ’23-’24 Ténéré 700

BHL-W001A-00-00

Fits ’21-’22 Ténéré 700

BAU-W001A-00-00

’24 MODEL GENUINE SERVICE PARTS

YAMAHA GENUINE OILS & FILTERS

TÉNÉRÉ 700 SUPER TÉNÉRÉ

Oil Capacity: Oil & Filter 2.75 US QT (2.6L) 3.59 US QT (3.4L)

Engine Oil Filter

5GH-13440-61-00 5GH-13440-61-00

Gasket (Order Qty) 214-11198-01-00 (1) 90430-12213-00 (2)

SHAFT DRIVE OIL (CAPACITY) N/A

YAMAHA GENUINE PARTS

Battery

Spark Plug

ACC-SHFTD-EX-00 (0.20L, 0.21 US QT)

5TJ-82100-01-00 YTZ-12S00-00-00

LMA-R8A9S-00-00 CPR-8EB90-00-00

Air Cleaner 1WS-14450-00-00 23P-14451-00-00

Coolant (Capacity) 1.69 US QT (1.6L) 1.93 US QT (1.83L)

Front Brake Pad Kit (Order Qty)

Rear Brake Pad Kit (Order Qty)

Front Sprocket

Rear Sprocket

BW3-F5805-00-00 (2) 2C0-25805-00-00 (2)

BW3-F5806-00-00 (1) 3D8-25806-00-00 (1)

BW3-17460-00-00 N/A

BW3-F5446-00-00 N/A

Drive Chain 94582-49122-00 N/A

Clutch Kit

Front Fork Seal Kit

1WS-W001G-00-00 23P-W001G-00-00

BAU-W003B-00-00 4PU-W003B-00-00

Fork Oil Seal 4PU-23145-01-00 4PU-23145-01-00

Fork Dust Seal 4PU-23144-00-00 4PU-23144-00-00

YAMAHA ULTRA HANDGUARDS BY CYCRA®

Derived from the iconic Cycra® Enduro Hand Shield, the Cycra® Ultra Handguard shield design boasts an improved ergonomic profile, removable dual zone ventilation system, and slimmer integrated abrasion guards. CRM clamp provides maximum bite to secure the handguards and allows for superior clearance on a wider range of bars. The patented CNC-machined billet bar is made from 6061 aircraft-quality aluminum to create a varied wall thickness and slimmer profile. The Powergrip bar ends have a slotted barrel that allows for a secure bite.

DBY-ACC56-34-97 (Blue)

DBY-ACC56-34-98 (White)

DBY-ACC56-34-99 (Black)

YAMAHA REBOUND HAND GUARDS BY CYCRA®

The Cycra® Rebound Hand Shields provide unrivaled strength and protection against trail debris, unexpected obstacles or accidental falls and are a great alternative to wraparound systems for woods or MX. In-molded rubber edge provides increased protection and can be mounted over or under bars for easy installation and clean hand control area. Features billet aluminum mounts and reinforced backbone on the shield. Includes shields, mounts, and hardware.

DBY-ACC56-35-08 (Blue)

GYTR® GRIP DONUTS

GYTR Grip Donuts are designed to help prevent blistering.

Fits all Off-Road Motorcycles

GYT-5XD22-00-00

GYTR® FACTORY RACING CROSSBAR PAD

Printed on 10" long, scratch-resistant 15-mil vinyl, featuring the Factory Racing logo.

Fits all Off-Road Motorcycles with 1-1/8" handlebars

GYT-5XC25-18-BL

GYTR® CROSSBAR PAD

Printed on 11" long, scratch-resistant, 15-mil vinyl featuring the Yamaha logo.

Fits all Off-Road Motorcycles with 7/8" crossbar-style handlebars

GYT-CROSS-BR-02

GYTR® MINI FACTORY RACING CROSSBAR PAD

Printed on 7.25" long, scratch-resistant, 15-mil vinyl, featuring the Factory Racing logo.

Fits all Off-Road Motorcycles with 7/8" crossbar-style handlebars

GYT-5HP25-78-BL

The Yamaha Racing M51 Plastic Gas Funnel helps make transferring fuel easy and splash free while keeping dirt and other debris out of your fuel tank. Has an anti-splash ring that reduces spills and splashing and includes a removable fine 100 grit mesh filter. Designed with a translucent color for accuracy and safety. Yamaha-exclusive design.

DBY-ACC56-35-06

contaminants. Long 8" flex shape eases access to hardto-reach filler openings. Made from a strong, durable, chemical-resistant polyethylene. Yamaha-exclusive design.

DBY-ACC56-35-07

YAMAHA RACING M28 DRAIN CONTAINER BY MATRIX CONCEPTS™

The Yamaha Racing M28 Drain Container features a no spill design that allows you to easily drain, and store used oils for proper disposal. Has a six-quart capacity and designed with a low profile making it the perfect drain container for the work shop or to be used on the go. Made in the USA from recycled plastic. Fits under the Yamaha Racing A2 Aluminum Stand. L 15.5" x W 12.5" x H 5"

DBY-ACC56-35-05

POWERDRIVE™ SLIDING T-DRIVER WITH 8-PIECE SOCKET SET BY CRUZTOOLS®

The PowerDrive™ Sliding T-handle set includes: 3/8" tip driver; 8, 10, 12, 14 and 17 mm sockets; 5 and 6 mm hex bits; #2 Phillips® screwdriver bit; a socket clip that attaches to the driver to keep the sockets in order; and a rugged vinyl pouch to keep the tools protected.

ACC-0SS58-40-67

DISPOSABLE MECHANICS GLOVE

Keep your hands cleaner by wearing nitrile mechanics gloves while you work. 100 Nitrile gloves per pack.

ACC-MECHG-LV-MD

ACC-MECHG-LV-LG

ACC-MECHG-LV-XL

YAMAHA RACING C2 STEEL STAND BY MATRIX CONCEPTS™

The ultra-durable Yamaha Racing C2 Steel Stand adds a factory look to your garage or pit setup. Matrix stands are trusted and used by Yamaha factory off-road race teams. Designed with 1010 carbon steel tubing, and a thick, durable powder-coated finish. Has an extra wide 10" X 10" top and a large foot print design for stability. Stackable for easy transportation and storage. Yamaha exclusive design.

DBY-ACC56-35-00

YAMAHA RACING A2 ALUMINUM STAND BY MATRIX CONCEPTS™

The ultra-durable Yamaha Racing A2 Aluminum Stand adds a factory look to your garage or pit setup. Matrix stands are trusted and used by Yamaha factory off-road race teams. Made from 1.25" 6063 aircraft-quality tubing and a thick, durable powder-coated finish. Weighs in at 3.9 lb. (56% lighter than the C2 Steel Stand). Has an extra wide 11" X 11" top and a large foot print design for stability. Is stackable for easy transportation and storage and features a Yamaha exclusive design. Compatible with the Yamaha Racing M28 Drain Container.

DBY-ACC56-35-02

YAMAHA RACING LS1 LIFT STAND BY MATRIX CONCEPTS™

The Yamaha Racing LS1 Lift Stand enables pedaloperated lifting of your motorcycle for easy maintenance, eliminating the manual lifting of conventional stands. Matrix stands are trusted and used by Yamaha factory off-road race teams. Constructed from extra strong carbon steel with a thick, durable powder-coated finish. A Delrin® bushing eliminates play in slider interface for added stability. Height measures in at 12" when fully lowered and 15.5" when fully raised. The top platform is 8" X 11" and the base is 14.5" X 13.5" and has a 500 lb. lift capacity. Super smooth action with urethane bottom bumper and easy access pedal self locks when in the up position.

DBY-ACC56-35-01

YAMAHA RACING M40 CARPETED WORK MAT BY MATRIX CONCEPTS™

The Yamaha Racing M40 Work Mat provides a clean workspace that will give any work area the look and feel of a Factory Yamaha garage. Used by Factory Yamaha teams. Made from high-grade durable carpet with PVC rubber bottom and edge. Direct printed and treated with oil and gas-resistant ink. Full 3.5’ X 7’ race size. Power wash and vacuum cleanable and features a Yamaha exclusive design.

DBY-ACC56-35-04

YAMAHA RACING PHATTY M1.5 TIE DOWN BY MATRIX CONCEPTS™

Yamaha Racing Phatty M1.5 Tie Downs may be the last tie downs you ever need. The 1.5-inch heavy-duty nylon strap paired with the no-slip cam-lock and swivel carabineer provide long-term, trouble-free performance and the ultimate confidence when transporting your motorcycle. Two tie downs are included in the package. The tie downs are abrasion-resistant and 1.5" wide with a heavy duty nylon webbing. They are square/cross double stitched with heavy duty nylon thread. Assembly strength is 1400 lb. with a 500 lb. load limit. Features a heavy duty steel spring “cam-lock” for a secure no-slip lock and a Yamaha exclusive non-fade graphics.

DBY-ACC56-35-03

GYTR® PANEL STAND

The GYTR Panel Stand is made of strong aluminum and features a rubber top pad to support and steady the bike during maintenance or storage. The conveniently built-in tool tray keeps tools and parts close to the bike.

GYT-YZRWK-ST-00

YAMAHA RATCHETING TIE DOWNS (BLACK)

The Yamaha Ratcheting Tie Downs are 1" x 10’ with a 1" rubber handle ratchet. Straps are rated for 400 lb. working and 1200 lb. break strength. (Sold in pairs).

ACC-0SS58-40-29 (Black ) (Shown)

ACC-0SS58-40-30 (Blue)

GYTR® ULTRA-HIGH PERFORMANCE RACING CHAINS BY EK®

GYTR Ultra-High Performance Racing Chains & Links by EK® offer the ultimate balance of performance and durability for various applications. Chains will not work on vehicles with a shaft drive.

520 GDXL(2) Quadra-Ring Lite Chain:

• Displacement Limit: Up to 650 cc

• Tensile strength = 8500 lb.

• 120 links

• Designed to reduce friction up to 40%

• Lasts 50% longer than the conventional 0-ring chains

• Lighter version of the 520 GDX for small and mid-sized off-road motorcycles, sportbikes, and ATVs

GYT-ACC56-20-01 (Gold, 520 GDXL2 X-Ring Lite Chain)

GYT-ACC56-20-20 (Gold, 520 GDXL2 Clip Type Master Link)

GYT-ACC56-20-03 (Gold, 520 GDXL2 Rivet Type Master Link)

GYT-ACC56-20-21 (Natural, 520 GDXL2 Clip Type Master Link)

520 GDO(2) O-Ring Chain:

• Displacement Limit: Up to 650 cc

• Tensile strength = 8000 lb

• 120 links

• Ideal for small and mid-sized off-road motorcycles, sportbikes, and ATVs

• Includes clip or rivet type master link

GYT-ACC56-20-05 (Gold, 520 GDO2 O-Ring Chain)

GYT-ACC56-20-22 (Gold, 520 GDO2 Clip Type Master Link)

GYT-ACC56-20-07 (Natural, 520 GDO2 O-Ring Chain)

GYT-ACC56-20-23 (Natural, 520 GD02 Clip Type Master Link)

GYT-ACC56-20-08 (Natural, 520 GDO2 Rivet Type Master Link)

520 GMX2 Non-Sealed (Non O-Ring) Chain:

• Displacement Limit: Up to 500 cc

• Tensile strength = 8400 lb.

• 120 links

• Specifically designed for Motocross and Supercross

• Race-tested by Factory Riders to meet today’s high performance machines

• High-tech CrH-coated pins for extremely hard outside surface and softer inside to increase the impact strength

• Includes clip or rivet type master link

GYT-ACC56-20-09 (Gold, 520 GMX2 Non O-Ring Chain)

GYT-ACC56-20-10 (Gold, 520 GMX2 Clip Type Master Link)

GYT-ACC56-20-11 (Natural, 520 GMX2 Non O-Ring Chain)

GYT-ACC56-20-12 (Natural, 520 GMX2 Clip Type Master Link)

428 GMX Non-Sealed (Non O-Ring) Chain:

• Displacement Limit: Under 200 cc

• Tensile strength = 5000 lb.

• 120 links/ 135 links (Big Wheel)

• Intended for smaller displacement off-road applications

• High-quality replacement chain for racing or trail usage

• Comes with solid bushings, solid rollers, and heattreated steel alloys

GYT-0SS56-31-93 (Gold, 428 GMX Non O-Ring Chain, Big Wheel Conversion)

YAMAHA CAM BUCKLE TIE DOWNS (BLACK)

The Yamaha Cam Buckle Tie Downs are 1" x 6' with 1" cam lock buckle. Straps are rated for 400 lb. working and 1200 lb. break strength. (Sold in pairs).

ACC-0SS58-40-27 (Black) (Shown)

ACC-0SS58-40-28 (Blue)

UNIVERSAL HANDLEBAR MOUNT BY TECHMOUNT®

The Universal Handlebar Mount by Techmount® has a new 4G design ball mount that clamps to any sized handlebar and will mount to any available location on the handlebar. Includes inserts to fit 7/8”, 1”, and 1-1/4” bars. For use with TechGripper® (DBY-ACC56-24-91), sold separately.

DBY-ACC56-24-92 (Black)

UNIVERSAL TECHGRIPPER® BY TECHMOUNT®

The Universal Tech Gripper by Techmount® has a new 4G design that allows attachment to any Techmount® ball. Opens wide enough to hold any cell phone and case with a simple and secure adjustment. Features a small and sleek design, and non-slip pads for a solid and secure grip. Has a stainless steel retraction system. A ball mount like the Universal Handlebar Mount (DBY-ACC56-24-92), sold separately, is required.

DBY-ACC56-24-91

YAMAHA DELUXE HOUR METER

The Yamaha Engine Meter helps you keep track of your engine’s operating hours. Also includes preprogrammed service intervals at 10 hours (initial) and every 50 hours thereafter. A flash alert displays for a 2-hour period upon reaching the specified interval. Works with all Yamaha 2-stroke and 4-stroke models, including Yamaha gasoline generators and pumps.

ENG-METER-2C-01

GENIUS®1™ CHARGER BY NOCO®

The NOCO GENIUS®1TM is a 6-volt and 12-volt battery charger, battery maintainer and battery desulfator rated at 1 amp for a variety of lead-acid and lithium-ion batteries including AGM automotive, marine and deepcycle batteries. 1-amp charging capacity is great for overnight charges, battery maintenance, and can charge dead batteries down to zero volts. It is as easy as plug in, connect to battery, select a charge mode and start charging.

DBY-ACC51-70-16

YAMAHA DELUXE HOUR METER & TACHOMETER

ENG-METER-4C-01

GENIUS®5™ CHARGER BY NOCO®

The NOCO GENIUS®5TM is a 6-volt and 12-volt battery charger, battery maintainer and battery desulfator rated at 5 amps for a variety of lead-acid and lithium-ion batteries including AGM automotive, marine and deepcycle batteries. 5x faster than the GENIUS1 with a 5-amp charging capacity great for jobs that require fast battery charging. It is as easy as plug in, connect to battery, select a charge mode and start charging.

DBY-ACC51-70-17

STANDARD HOUR METER

This Standard Hour Meter is a must-have for logging time on your Yamaha engine. Hour meter function only (no service alerting function). Installs in minutes.

Fits all Yamaha two-stroke and four-stroke gas models

ENG-HOURS-00-00

GENIUS® GEN5X1 ONBOARD CHARGER BY NOCO®

The NOCO GENIUS® GEN5X1 is a single-bank waterproof onboard battery charger rated at 5 amps for 12-volt batteries including Side-by-Side, marine, boat and deepcycle batteries. Selectable charging modes include 12V, 12V AGM, 12V Lithium and 12V Repair Mode. Not just a trickle charger, an advanced battery maintainer and fully automatic, worry-free battery charger for everyday use. Charges batteries as low as 1-volt or use all-new force mode allowing manual charging of dead batteries. Fully-sealed and waterproof with Ingress Protection Rating of IP68.

DBY-ACC51-70-18

GENIUS®2X4™ 4-BANK CHARGER BY NOCO®

The NOCO GENIUS®2X4TM is a 6-volt and 12-volt 4-bank battery charger, battery maintainer, trickle charger and battery desulfator. It’s rated at 8 amps (2 amps per bank) for all types of lead-acid and lithium-ion batteries including flooded, gel, AGM, marine and deep-cycle batteries. 2-amp charging capacity per bank is great for multi-battery charging jobs that require quick battery charging and is 2x faster than GENIUS1. As easy as plug-in, connect to battery, select a charge mode and start charging.

DBY-ACC51-70-20

GENIUS®2X2™ 2-BANK CHARGER BY NOCO®

The NOCO GENIUS®2X2TM is a 6-volt and 12-volt 2-bank battery charger, battery maintainer, trickle charger and battery desulfator. It’s rated at 4 amps (2 amps per bank) for all types of lead-acid and lithium-ion batteries including flooded, gel, AGM, marine and deep-cycle batteries. 2-amp charging capacity per bank is great for multi-battery charging jobs that require quick battery charging. Is 2x faster than GENIUS1 and as easy as plug-in, connect to battery, select a charge mode and start charging.

DBY-ACC51-70-19

GC008 X-CONNECT XL EYELET TERMINAL CONNECTOR BY NOCO®

The X-Connect XL Eyelet Terminal allows the quick, easy connection of a battery charger to any battery. Replace a lost connector or permanently mount one on your motorcycle, ATV, snowmobile, personal watercraft, lawn mower or other battery for easy charging.

DBY-ACC51-70-26

GB40 BOOST PLUS™ 1000 AMP JUMP STARTER BY NOCO®

The NOCO Boost® Plus GB40 is a portable lithium-ion battery jump starter pack that delivers 1,000 amps for jump starting a dead battery in seconds. It’s a powerful battery booster/jump starter designed for cars, boats, RVs, trucks and more. Also doubles as a convenient portable power source for recharging your smartphone, tablet or other USB device.

DBY-ACC51-70-21

GC002 X-CONNECT EYELET TERMINAL CONNECTOR BY NOCO®

The X-Connect Eyelet Terminal allows the quick, easy connection of a battery charger to any battery. Replace a lost connector or permanently mount one on your motorcycle, ATV, snowmobile, personal watercraft, lawn mower or other battery for easy charging.

DBY-ACC51-70-25

PLASTIC RENEWAL KIT

Designed to help restore the shine to your plastic fenders or other plastic components. Includes sandpaper, fine steel wool and the special Plastic Renew fluid.

ABA-SCRAT-CH-KT

MOTOCROSS OILS & FILTERS

Model Year Model

*B = 10W40 or 10W50 BELOW 40°F

MOTOCROSS YAMAHA GENUINE

(1) 5GR-W0046-00-00 (1) N/A N/A 9Y581-92113-00 2000 2002 YZ125 N/A BR9-EG000-00-00 4XM-14451-00-00

MOTOCROSS OILS & FILTERS

*A = 10W40, 10W50, 20W50 or 15W50 OVER 40°F *B = 10W40 or 10W50 BELOW 40°F

MOTOCROSS YAMAHA GENUINE PARTS

5PA-25448-00-00 4ES-W003B-00-00

9382A-15228-00 5PA-25448-00-00 4ES-W003B-00-00 4ES-23145-00-00 4ES-23144-00-00 1SN-W002E-00-00 1SN-W002C-00-00 5PA-W0001-00-00 N/A 5PA-W001G-00-00

9382A-15228-00 5PA-25448-00-00 4ES-W003B-00-00 4ES-23145-00-00 4ES-23144-00-00 1SN-W002E-00-00

9382A-14227-00 5PA-25446-00-00 4ES-W003B-00-00 4ES-23145-00-00 4ES-23144-00-00 B4B-W002E-00-00 1SN-W002C-00-00 B4B-W0001-00-00 N/A 5PA-W001G-00-00

9382A-14227-00 5PA-25446-00-00 4ES-W003B-00-00 4ES-23145-00-00 4ES-23144-00-00 B4B-W002E-00-00 1SN-W002C-00-00 B4B-W0001-00-00 N/A B4B-W001G-00-00

9382A-14227-00 5PA-25446-00-00 BR8-W003B-00-00

9383A-14054-00

9383A-14054-00 1C3-25448-00-00 5ET-W003B-00-00 5UN-23145-L0-00

9383A-14054-00 1C3-25448-00-00 1C3-W003B-00-00 5XE-23145-L0-00 5XE-23144-L0-00

9383B-13218-00

2021 2021 YZ250 N/A

MOTOCROSS YAMAHA GENUINE PARTS

4XM-14451-00-00

N/A

(1) 1C3-W0046-10-00 (1) N/A N/A 9Y582-28113-00

(1) 1C3-W0046-50-00 (1) N/A N/A 9Y582-28113-00

2009 YZ250F N/A CR9-E0000-00-00 4XM-14451-00-00 5XC-W0045-00-00 (1) 1C3-W0046-50-00 (1) N/A N/A

2010 2013 YZ250F N/A CR9-E0000-00-00 4XM-14451-00-00 5XC-W0045-00-00 (1) 1C3-W0046-50-00 (1) N/A N/A

2014 2015 YZ250F N/A LMA-R8G00-00-00

MOTOCROSS YAMAHA GENUINE PARTS

Front Sprocket Rear Sprocket Front Fork Seal Kit Fork Oil Seal Fork Dust Seal Bearing KitShock Linkage Bearing KitSwingarm Pivot Gasket Kit - Top End Gasket KitBottom End Clutch Kit

93834-13206-00

93834-14050-00

9383E-14215-00 1C3-25448-00-00

9383E-14215-00 1C3-25448-00-00 1C3-W003B-00-00 1C3-23145-L0-00 5XE-23144-L0-00 1P8-W002E-00-00 N/A 1P8-W0001-00-00 N/A 1P8-W001G-00-00

9383E-13216-00 1C3-25448-00-00 1C3-W003B-00-00 1C3-23145-L0-00 5XE-23144-L0-00 1P8-W002E-00-00 1HC-W002C-00-00 1P8-W0001-00-00 N/A 1P8-W001G-00-00

9383E-13216-00 1C3-25448-00-00 1C3-W003B-00-00 1C3-23145-L0-00 5XE-23144-L0-00 1SR-W002E-00-00 1HC-W002C-00-00 1P8-W0001-00-00 N/A 1P8-W001G-00-00

9383E-14215-00 17D-25450-50-00 17D-W003B-00-00 17D-23145-00-00 5XE-23144-L0-00 1SR-W002E-00-00 1HC-W002C-00-00 1P8-W0001-00-00 TBD 1P8-W001G-00-00

9383E-14215-00 17D-25450-50-00 17D-W003B-00-00 17D-23145-00-00 5XE-23144-L0-00 1SR-W002E-00-00 1HC-W002C-00-00 1P8-W0001-00-00 N/A 1P8-W001G-00-00

9383E-14215-00 17D-25450-50-00 17D-W003B-00-00 17D-23145-00-00 5XE-23144-L0-00 1SR-W002E-00-00 1HC-W002C-00-00 1P8-W0001-00-00 N/A N/A

9383E-14215-00 B2W-25450-00-00 BCR-W003B-00-00 B29-23145-00-00 5XE-23144-L0-00 B1B-W002E-00-00 1HC-W002C-00-00 N/A N/A

9383B-13218-00 1C3-25448-00-00 5ET-W003B-00-00 5UN-23145-L0-00 5HD-23144-L0-00

9383B-13218-00 1C3-25448-00-00 1C3-W003B-00-00 5XE-23145-L0-00 5XE-23144-L0-00

9383B-13218-00 1C3-25448-00-00 1C3-W003B-00-00 1C3-23145-L0-00 5XE-23144-L0-00

B9U-W001G-00-00

1HC-W002C-00-00 5NL-W0001-00-00 5NL-W0002-00-00 N/A

9383B-13218-00 1C3-25448-00-00 1C3-W003B-00-00 1C3-23145-L0-00 5XE-23144-L0-00 1P8-W002E-00-00 1HC-W002C-00-00 5NL-W0001-00-00 5NL-W0002-00-00 N/A

9383B-13218-00 1C3-25448-00-00 1C3-W003B-00-00 1C3-23145-L0-00 5XE-23144-L0-00 1HC-W002E-00-00 1HC-W002C-00-00 5NL-W0001-00-00 5NL-W0002-00-00 N/A

9383B-13218-00 1C3-25448-00-00 1C3-W003B-00-00 1C3-23145-L0-00 5XE-23144-L0-00 33D-W002E-00-00 1HC-W002C-00-00 5NL-W0001-00-00 5NL-W0002-00-00 N/A

9383B-13218-00 17D-25449-50-00 17D-W003B-00-00 17D-23145-00-00 5XE-23144-L0-00 17D-W002E-00-00 1HC-W002C-00-00 5NL-W0001-00-00 5NL-W0002-00-00 N/A

9383B-13218-00 17D-25449-50-00 17D-W003B-00-00 17D-23145-00-00 5XE-23144-L0-00 33D-W002E-00-00 33D-W002C-00-00 N/A N/A 1SM-W001G-00-00

9383B-13218-00 17D-25452-50-00 17D-W003B-00-00 17D-23145-00-00 5XE-23144-L0-00 33D-W002E-00-00 33D-W002C-00-00 N/A N/A 1SM-W001G-00-00

9383B-13218-00 17D-25450-50-00 B29-W003B-00-00 B29-23145-00-00 5XE-23144-L0-00 33D-W002E-00-00 BR9-W002C-00-00 B7B-W0001-00-00 N/A B7B-W001G-00-00

9383B-13218-00 17D-25450-50-00 B29-W003B-00-00 B29-23145-00-00 5XE-23144-L0-00 33D-W002E-00-00 BR9-W002C-00-00 N/A N/A B7B-W001G-00-00

9383B-13218-00 B2W-25450-00-00 BDB-W003B-01-00 B29-23145-00-00 5XE-23144-L0-00 33D-W002E-00-00 BR9-W002C-00-00 B7B-W0001-00-00 B7B-W0002-00-00

9383B-13218-00

B7B-W001G-00-00

B2W-25450-00-00 BDB-W003B-01-00 B29-23145-00-00 5XE-23144-L0-00 33D-W002E-00-00 BR9-W002C-00-00 B7B-WB033-11-00 N/A B7B-W001G-00-00

B2W-25450-00-00 BHR-W003B-00-00 B29-23145-00-00 BHR-23144-00-00 33D-W002E-00-00 BR9-W002C-00-00 B7B-WB033-11-00 N/A

9383E-14215-00 1C3-25448-00-00 5ET-W003B-00-00 5UN-23145-L0-00 5HD-23144-L0-00

9383E-14215-00 1C3-25448-00-00 5ET-W003B-00-00 1C3-23145-L0-00 5HD-23144-L0-00

9383E-14215-00 1C3-25448-00-00 1C3-W003B-00-00 1C3-23145-L0-00 5XE-23144-L0-00

9383E-13233-00 1C3-25448-00-00 1C3-W003B-00-00 1C3-23145-L0-00 5XE-23144-L0-00 1HC-W002E-00-00 1HC-W002C-00-00 2S2-W0001-00-00 2S2-W0002-00-00 2S2-W001G-00-00

9383E-13233-00 1C3-25448-00-00 1C3-W003B-00-00 1C3-23145-L0-00 5XE-23144-L0-00 33D-W002E-00-00 1HC-W002C-00-00

9383E-13233-00

9383E-13233-00 17D-25449-50-00 17D-W003B-00-00

9383E-13233-00

9383E-13233-00 17D-25452-50-00 17D-W003B-00-00 17D-23145-00-00

9383E-13233-00

9383E-13233-00 17D-25448-50-00 B29-W003B-00-00 B29-23145-00-00 5XE-23144-L0-00

9383E-13233-00 B2W-25449-00-00 BDB-W003B-01-00 B29-23145-00-00 5XE-23144-L0-00 1SS-W002G-00-00

BR9-W002C-00-00 B2W-W0001-00-00 B2W-W0002-00-00 BR9-W001G-00-00

9383E-13233-00 B2W-25449-00-00 BHR-W003B-00-00 B29-23145-00-00 BHR-23144-00-00 33D-W002E-00-00 BR9-W002C-00-00 BHR-WB033-00-00 N/A BHR-W001G-00-00

CROSS COUNTRY OILS & FILTERS

*A = 10W40, 10W50, 20W50 or 15W50 OVER 40°F

CROSS COUNTRY OILS & FILTERS

CROSS COUNTRY YAMAHA GENUINE PARTS

9383E-14215-00

9383E-14215-00 17D-25450-50-00 B1B-W003B-00-00 17D-23145-00-00

9383E-14215-00

9383B-13218-00

9383B-13218-00 B2W-25451-00-00 B29-W003B-01-00 B29-23145-00-00

93834-14050-00

3D7-17460-00-00

CROSS

2023 WR450F 5TJ-82100-01-00 LMA-R8G00-00-00 B2W-14451-01-00 B2W-25805-00-00 (1) 1C3-W0046-B0-00 (1) N/A N/A 9Y582-50113-00

WR450F BR9-82100-A9-00 LMA-R8G00-00-00 BHR-14451-00-00 B2W-25805-00-00 (1) 1C3-W0046-B0-00 (1) N/A N/A 9Y582-50113-00

CROSS COUNTRY YAMAHA GENUINE PARTS

9383B-13218-00

9383E-13233-00

9383E-14215-00

5NG-17460-00-00

17D-25450-50-00 B29-W003B-00-00 B29-23145-00-00 5XE-23144-L0-00

17D-25450-50-00

B2W-25450-00-00

5TJ-25450-80-00

B29-W003B-00-00 B29-23145-00-00 5XE-23144-L0-00

BDB-W003B-01-00

B29-23145-00-00

5XE-23144-L0-00

33D-W002E-00-00

BHR-W003B-00-00 B29-23145-00-00 BHR-23144-00-00 33D-W002E-00-00

5NG-17460-00-00 5GS-25448-50-00 5ET-W003B-00-00 17D-23145-00-00 5HD-23144-L0-00

5NG-17460-00-00 5TJ-25450-80-00 1C3-W003B-00-00 17D-23145-00-00 5HD-23144-L0-00

BR9-W002C-00-00

BR9-W0001-00-00

BR9-W002C-00-00 N/A

BR9-W0002-00-00

BR9-W002C-00-00 B2W-WB033-10-00 N/A

B3J-W001G-00-00

5TJ-17460-00-00 5TJ-25450-80-00 1C3-W003B-00-00 17D-23145-00-00 5HD-23144-L0-00 1HC-W002E-00-00 1HC-W002C-00-00 2S2-W0001-00-00 2S2-W0002-00-00 5TJ-W001G-00-00

5TJ-17460-00-00 5TJ-25450-80-00 17D-W003B-00-00 17D-23145-00-00 5XE-23144-L0-00 1HC-W002E-00-00 1HC-W002C-00-00 2S2-W0001-00-00 2S2-W0002-00-00 5TJ-W001G-00-00

5TJ-17460-00-00 5TJ-25450-80-00 17D-W003B-00-00 17D-23145-00-00 5XE-23144-L0-00 1HC-W002E-00-01 1HC-W002C-00-00 2S2-W0001-00-00 2S2-W0002-00-00 5TJ-W001G-00-00

9383E-13233-00

5TJ-25450-80-00 17D-W003B-00-00 17D-23145-00-00 5XE-23144-L0-00 33D-W002E-00-00 33D-W002C-00-00 1SL-W0001-00-00 2S2-W0002-00-00 1SL-W001G-00-00

9383E-13233-00 5TJ-25450-80-00 17D-W003B-00-00 17D-23145-00-00 5XE-23144-L0-00 33D-W002E-00-00 33D-W002C-00-00 1SL-W0001-00-00 2S2-W0002-00-00 B3J-W001G-00-00

9383E-13233-00 5TJ-25450-80-00 BDB-W003B-00-00 B29-23145-00-00 5XE-23144-L0-00 33D-W002E-00-00 BR9-W002C-00-00 B2W-WB033-10-00 N/A B3J-W001G-00-00

9383E-13233-00 5TJ-25450-80-00 BHR-W003B-00-00 B29-23145-00-00 BHR-23144-00-00 33D-W002E-00-00 BR9-W002C-00-00 N/A N/A BNK-W001G-00-00

TRAIL OILS & FILTERS

Model Year Model

TRAIL YAMAHA GENUINE PARTS

ADVENTURE TOURING OILS & FILTERS

DUAL SPORT OILS & FILTERS

ADVENTURE TOURING YAMAHA GENUINE PARTS

DUAL SPORT YAMAHA GENUINE PARTS

California Regulations Regarding Emission-Related Parts and Accessories

California law regulates on- and off-highway vehicle aftermarket parts that have the potential to impact emissions. California law prohibits the installation, sale, and on- and off-highway use of any emissionsrelated part unless the part is (1) a replacement part, (2) a modified or add-on part that has received an exemption from the California Air Resources Board (ARB) or (3) a part installed on a vehicle used exclusively for closed-course competition (i.e., racing).

Replacement Part

A replacement part is generally any aftermarket part intended to replace an original equipment emissionrelated part and which is functionally identical to the original equipment part in all respects that in any way affect emissions.

Modified Part or Add-On Part

A modified part is any aftermarket part intended to replace an original equipment emissions-related part and which is not functionally identical to the original equipment part in all respects that in any way affect emissions. An add-on part is any aftermarket part which is not a modified part or a replacement part.

Closed-Course Competition Part

A closed-course competition part is a modified part or add-on part that has not received an exemption from the ARB. A closed-course competition part may only be sold and installed on a vehicle that is used exclusively for closed-course competition. California dealers selling closed-course competition parts should maintain records of the sale and/or installation, including the date of sale, purchaser name and address, vehicle information and work performed, if applicable.

More information may be obtained at the ARB website - www.arb.ca.gov.

Product and specifications subject to change without notice. Availability subject to production, stocking, and demand.

All information based on availability at time of publication and subject to change without notice. While every effort has been made to ensure accuracy of the information contained herein, Yamaha Motor Corporation, U.S.A. does not guarantee such accuracy and cannot be held liable for any errors in, inaccuracies, omissions or any reliance upon the information contained herein.

Professional riders depicted on a closed course. At Yamaha, we want every ride to be safe and enjoyable. Always dress properly for your ride with a helmet, eye protection, and protective apparel, including riding jacket or long-sleeve shirt, long pants, gloves and boots. Avoid excessive speeds and never engage in stunt riding. Never ride under the influence of alcohol or other drugs; it is illegal and dangerous. Always inspect your Yamaha before riding. Read the Owner’s Manual and the product warning labels before operation. Yamaha and the Motorcycle Safety Foundation encourage you to ride safely and respect the environment. For safety and training information, see your dealer or call the MSF at 1-800-446-9227.

This document contains many of the valuable trademarks and service marks owned and used by Yamaha throughout the world. The document may also contain references to other company, brand, and product names that may be the trademarks/ service marks of their respective owners. Unless noted otherwise, these company, brand, and product names are used herein for identification purposes only, and reference to any names, marks, products, or services of third parties do not constitute or imply endorsement, sponsorship, or recommendation of the third party or the products or services.