Westword Catalog by Yellow Pencil

2010WestwardCatalogueCover_EN.qxp

2/12/10

3:56 PM

Page 1

25876 WestwardInsideCoverNEW.qxp

2/12/10

11:00 AM

Page 1

Industrial Strength Value • Brand-name quality and dependability

at affordable prices

1500 locations across Canada. Call1-866-523-4443 to locate one near you.

• Get the products you need with more

than 4000 tools and accessories • Engineered and built to

high-quality standards • Lifetime warranty replacements

are easy & hassle-free • Exceptional product knowledge and

technical help, when you need it *Some exceptions apply. See full Westward Warranty. Information and Terms and Conditions at westwardtools.ca

Take advantage of high quality safety products at private brand prices with Condor safety equipment. Pages 324 - 360

westwardtools.ca

TableofContents.qxp

2/9/10

12:47 PM

Page 1

Table of Contents Check out these new products! They are flagged in the catalogue with our

symbol making it easy for you to find them. • Mill/Drills • Cord Reels • Worklights • Eye Protection • Hearing Protection • Titanium Tools • Band Saws • Hand Trucks • Air Line Lubrication • Welders

Pricing Information For pricing detail, please contact your local Westward distributor. To find your local Westward distributor, visit www.westwardtools.ca. See full Westward Warranty Information and Terms and Conditions on the Inside Back Cover of this catalogue.

Tool Kits & Tool Storage . . . . . . . . . . . . . . . . 3-44 Chrome Sockets, Sets & Accessories . . . . . . . . . . . . . . . 45-80 Impact Sockets, Sets & Accessories . . . . . . . . . . . . . . . 81-98 Wrenches . . . . . . . . . . . . . . 99-128 Screwdrivers, Hex Keys & Driver Bits . . . . . . . . . . . . . 129-158 Pliers, Cutters, Snips & Knives . . . . . . . . . . . . . 159-184 Striking Tools . . . . . . . . . . . . . 185-206 Drills & Cutting Tools . . . . . . . . . . . . . 207-230 Measuring, Test & Inspection Tools . . . . . . . . . . . . . 231-258 Material Handling & Equipment . . . . . . . . . . . . . 259-304 Safety Tools . . . . . . . . . . . . . 305-360 Air & Lubrication Tools . . . . . . . . . . . . . 361-386 Specialty Tools . . . . . . . . . . . . . 387-398

W002-10.qxp

2/12/10

11:05 AM

Page 1

NATIONAL TECHNICAL SERVICES When you need repairs or scheduled maintenance performed on your tools and equipment – we make it easy. • Acklands-Grainger’s National Technical Service (NTS) is Westward’s authorized warranty and repair service provider • We ensure your tools and equipment are maintained to high-quality standards – minimizing down-time and maximizing productivity • Register your equipment with NTS ServiceLink to receive pre-scheduled service notifications via email • Simply visit the location where you purchased your product and they will manage the whole repair process – professionally and efficiently • All NTS repairs are carried out to applicable CSA and Westward standards

From our global product sourcing, we partner with industry’s premier tool and equipment manufacturers to bring you product excellence that you depend on to get the job done right. You get the best in quality and great new innovations from the Westward product lineup.

1-866-523-4443 westwardtools.ca

W003-10.qxp

2/16/10

4:19 PM

Page 3

TOOL KITS & TOOL STORAGE

Master Tool Kits. . . . . . . . . . . . . 4-11 Tool Kits . . . . . . . . . . . . . . . . . 12-16 Metrinch® Sets . . . . . . . . . . . . . . . 17 Vortex™ Socket Set . . . . . . . . . 18-19 Black Chrome Tools. . . . . . . . . . . . 20 Stainless Steel Tools . . . . . . . . 21-22 Tool Pouches . . . . . . . . . . . . . . 23-24 Tool Storage & Accessories . . . . 25-44

W004-10.qxp

2/8/10

1:21 PM

Page 4

TOOL KITS

646 PIECE TOOL KIT WITH 42" CABINET & CHEST • Heavy-duty 13 drawer roller cabinet and 9 drawer tool chest. • Ball bearing drawer slides. • Complete selection of SAE and metric sockets in 1⁄4", 3⁄8" and 1⁄2" drive. • Fully polished SAE and metric wrenches. • 110 piece tap and die set. • Full selection of pliers including insulated handles. • Pro series screwdrivers and hex keys. • Punches, chisels, shears and gasket scrapers. • Torque wrench, pipe wrench and holesaw kit. • Many more specialty tools.

Part No.

Description

SKC700

646 Piece Tool Kit

Shpg. Wt. (lbs.) 555.0

www.westwardtools.ca

W005-10.qxp

2/8/10

1:22 PM

Page 5

TOOL KITS

646 PIECE PROFESSIONAL TOOL KIT • 6 drawer roller cabinet and 12 drawer tool chest. • Ball bearing drawer slides. • Complete selection of SAE and metric sockets in 1⁄4", 3⁄8" and 1⁄2" drive. • Fully polished SAE and metric wrenches. • 110 piece tap and die set. • Full selection of pliers including insulated handles. • Pro series screwdrivers and hex keys. • Punches, chisels, shears and gasket scrapers. • Torque wrench, pipe wrench and holesaw kit. • Many more specialty tools.

Part No.

Description

Shpg. Wt. (lbs.)

SKC650

646 Piece Kit

420.0

www.westwardtools.ca

W006-10.qxp

2/8/10

1:23 PM

Page 6

TOOL KITS

600 PIECE MASTER TOOL KIT • 7 Drawer Roller Cabinet and 9 Drawer Tool Chest. • This set contains an extensive selection of tools for the serious professional. • Ball bearing drawer slides. • Fully polished combination wrench design grips fasteners on the side, not corners, reducing potential damage to the fastener. • Screwdrivers and pliers feature a comfort grip – ergonomically designed handles for greater comfort.

Part No.

Description

Shpg. Wt. (lbs.)

SKC600

600 Piece Kit

400.0

www.westwardtools.ca

W007-10.qxp

2/8/10

1:24 PM

Page 7

TOOL KITS

500 PIECE TOOL KIT • 3 drawer roller cabinet and 6 drawer tool chest. • This set contains an extensive selection of tools for the serious professional. • Fully polished combination wrench design grips fasteners on the side, not corners, reducing the potential of damage to the fastener. • Screwdrivers and pliers feature a comfort grip – ergonomically designed handles for greater comfort.

Part No.

Description

Shpg. Wt. (lbs.)

SKC500

500 Piece Kit

350.0

www.westwardtools.ca

W008-10.qxp

2/16/10

9:17 AM

Page 8

TOOL KITS 290 PIECE TOOL KIT WITH 40" CABINET • 112 piece 1⁄4", 3⁄8" and 1⁄2" drive 6 point regular and deep sockets in both SAE and metric, with extensions, adapters & ratchets. • 21 SAE and metric combination wrenches. - 12 metric: 8 – 19 mm. - 9 SAE: 1⁄4" – 3⁄4". • 7 SAE and metric flare nut wrenches. - 4 metric: 9 – 17 mm. - 3 SAE: 3⁄8" – 11⁄16". • 9 screwdrivers. - 2 square #1, #2. - 3 slotted 4, 5, 6. - 2 stubby slotted 2, 6. - 2 Phillips #1, #2. • 6 precision screwdrivers. - 4 slotted 2, 2.4, 3, 3.5. - 2 Phillips #0, #1. • 7 SAE nut drivers. - 3⁄16", 1⁄4", 5⁄16", 11⁄32", 3⁄8", 7⁄16", 1⁄2". • 11 pliers. - 8" slip joint. - 6" long nose. - 7" side cutter. - 8" linesman. - 10" groove joint. - 6.5" locking. - 7" locking. - 7" internal open straight. - 7" external open curved. - 7" internal close straight. - 7" external close curved.

• • • • • • • • • • • • • • • • • •

2 adjustable wrenches. Straight cut tin snips. 2 ball pien hammers. 6 pin punches. 1 center punch. 2 cold chisels. Telescopic pick-up tool. Tape measure. Flashlight. 10 piece gauge. 0 – 150 mm caliper. 0 – 25 mm outside micrometer. Precision square. 12" ruler. Protractor. Scissors. 12" hacksaw frame with blade. 2 utility knives with replacement blades. 12" straight hacksaw with blade. 12" 24T HSS bimetal hacksaw blade. 6 piece key set. 10 piece ball point hex key set. 9 piece torx key set. Flat file. Half-round file. Round file. Square file. Three square file. Assortment of taps & dies. 8 drawer 40" roller cabinet.

• • • • • • • • • • • •

Part No.

Description

SKC290

Intermediate Kit

Shpg. Wt. (lbs.) 300.0

148 PIECE TOOL KIT WITH CABINET • • • •

Includes 1⁄4", 3⁄8" and 1⁄2" drive sockets in both SAE and metric. 21 SAE and metric wrenches. Screwdrivers, pliers and driver bits. 8 drawer 27" roller cabinet.

Part No.

Description

Shpg. Wt. (lbs.)

SKC148

148 Piece Kit

184.0

www.westwardtools.ca

W009-10.qxp

2/8/10

1:26 PM

Page 9

TOOL KITS

300 PIECE STARTER TOOL KIT • This tool kit is specifically designed for those entering the field of mechanics. • 6-drawer tool chest. • Featuring our gearless ratcheting screwdriver bit set, torks bit socket set, and a wide variety of specialty automotive tools.

Part No.

Description

Shpg. Wt. (lbs.)

SKC300

300 Piece Kit

120.0

250 PIECE PROFESSIONAL TOOL KIT • 6-drawer Westward tool chest. • For the mechanic looking to upgrade to our Professional Series... this tool kit is for you. • Fully polished combination wrench design grips fasteners on the side, not corners, reducing the potential of damage to the fastener. • Screwdrivers and pliers feature a comfort grip – ergonomically designed handles for greater comfort. • See pages 399 – 404 for complete listings.

Part No.

Description

Shpg. Wt. (lbs.)

SKC250

250 Piece Kit

117.0

www.westwardtools.ca

W010-10.qxp

2/8/10

1:27 PM

Page 10

TOOL KITS

213 PIECE INTERMEDIATE TOOL KIT • Complete range of 1⁄4" and 3⁄8" drive sockets in SAE and metric. • Includes wrenches, screwdrivers and a variety of automotive specialty tools. • 6-drawer tool chest. • See pages 399 – 404 for complete listings.

Part No.

Description

Shpg. Wt. (lbs.)

SKC213

213 Piece Kit

98.0

110 PIECE UTILITY TOOL KIT • 3-drawer tool box and tote tray. • A compact kit, easy to carry, and includes all the basics. • Comes complete with a basic range of combination wrenches, punches, chisels, screwdrivers, 1⁄4" and 3⁄8" drive sockets and pliers. • This tool kit is designed for the do-it yourself person for around the home, cottage, or perfect for the vehicle for unexpected emergencies. • See pages 399 – 404 for complete listings.

Part No.

Description

Shpg. Wt. (lbs.)

SKC110

110 Piece Kit

60.0

www.westwardtools.ca

W011-10.qxp

2/8/10

1:28 PM

Page 11

TOOL KITS

SKC330

SKC158

330 PIECE PRO SERIES TOOL KIT • Complete with compact position lock tool box. • The most complete custom designed Westward tool kit containing professional quality SAE and metric tools. • Fully polished combination wrench design grips fastener on the flat side, not the corners, reducing the potential for damage to the fastener. • Professional series pliers, comfort grip screwdrivers, 1⁄4", 3⁄8" and 1⁄2" drive ratchets and sockets. • See pages 399 – 403 for complete listings.

Part No.

Description

Shpg. Wt. (lbs.)

SKC330

330 Piece Kit

224.0

158 PIECE PRO SERIES TOOL KIT • Complete with compact position lock tool box. • This custom designed Westward professional series kit contains a wide variety of tools needed for everyday applications. • Wrenches and sockets in SAE sizes only. • Fully polished combination wrench design grips fastener on the flat side, not the corners, reducing the potential for damage to the fastener. • Professional series pliers, comfort grip screwdrivers, 1⁄4", 3⁄8" and 1⁄2" drive ratchets and sockets. • See pages 399 – 403 for complete listings.

Part No.

Description

Shpg. Wt. (lbs.)

SKC158

158 Piece Kit

120.0

www.westwardtools.ca

W012-10.qxp

2/8/10

1:29 PM

Page 12

TOOL KITS 90 PIECE TOOL KIT & SERVICE CART • Molded storage trays in each drawer. • Chrome vanadium sockets and carbon steel combination wrenches. • Tools meet ANSI specifications where applicable.

1⁄4" Drive • 9 – 6 point socket SAE: 3⁄16", 7⁄32", 1⁄4", 9⁄32", 5⁄16", 11⁄32", 3⁄8", 7⁄16", 1⁄2". • 9 – 6 point socket metric: 4, 5, 6, 7, 8, 9, 10, 11, 12 mm. • 1 spinner handle. • 1 hex coupler. • 18 bits: Torks: T10, T15, T20, T25, T30, T40. Hex: 3, 4, 5 mm. Phillips: #1, #2, #3. Slotted: 4, 5.5, 6.5 mm. Square: #1, #2, #3.

3⁄8" Drive • 7 – 12 point socket SAE: 3⁄8", 7⁄16", 1⁄2", 9⁄16", 5⁄8", 11⁄16", 3⁄4". • 10 – 12 point socket metric: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm. • 1 ratchet handle. • 1 adapter 3⁄8" F x 1⁄4" M. • 1, 3" extension bar. • 1 spark plug socket 5⁄8". • 14 combination wrenches: SAE: 1⁄4", 5⁄16", 3⁄8", 7⁄16", 1⁄2", 9⁄16", 5⁄8", 11⁄16", 3⁄4". Metric: 10, 12, 13, 14, 15 mm. • 5 hex key with ring: 3, 4, 5, 6, 8 mm. • 5 hex key with ring: 3⁄32", 1⁄8", 5⁄32", 3⁄16", 1⁄4". • 2 screwdrivers: Slotted 1⁄4" x 4", Philips #2 x 4". • 2 stubby screwdrivers: Slotted 1⁄4" x 4", Philips #2 x 11⁄2". • 1, 6" diagonal pliers. • 1, 6" long nose pliers. • 1, 8" adjustable wrench. • 1 cart.

Part No.

Description

SKC91

90 Piece Kit

Shpg. Wt. (lbs.) 110.0

38 PIECE GENERAL PURPOSE TOOL KIT Includes: • 6 SAE combination wrenches 3⁄8" – 3⁄4". • 3⁄8" ratchet, 2 extensions and universal joint. • 9 sockets, 3⁄8" – 7⁄8". • 4 screwdrivers, 9 hex keys. • 6" slip joint pliers, 10" tongue and groove, and 8" adjustable wrench. • 12 oz. ball pein hammer, utility knife in a tool box with tote tray.

Part No.

Description

SKC38

38 Piece Kit

Shpg. Wt. (lbs.) 10.1

www.westwardtools.ca

W013-10.qxp

2/8/10

1:30 PM

Page 13

TOOL KITS 155 PIECE MECHANICS TOOL KIT The Mechanics Tool Set includes a wide variety of regular and deep length sockets in 6 point design, 1⁄4", 3⁄8", and 1⁄2" drive ratchets and attachments, 12 long length wrenches the professionals use, and hex keys in popular SAE and metric sizes. The Mechanics screwdriver comes complete with 44 bits to tackle most jobs. A handy magnetic tray to hold your parts and fastener during a job, and a heavy-duty storage case with secure lock-in-place tools are also included. All Ultima™ Mechanics Tools meet or exceed CGSB and ANSI standards and have a limited lifetime warranty.

Part No.

Description

Shpg. Wt. (lbs.)

3-155

155 Piece Kit

40.0

125 PIECE PROFESSIONAL SOCKET SET Contents: • 1⁄4", 3⁄8", 1⁄2" drive ratchets. • 1⁄4", 3⁄8", 1⁄2" drive extensions. • 3⁄8" to 1⁄4" adapter. • 3⁄8" U-joint. • 1⁄4" drive spinner handle. • 1⁄4" coupler. • 1⁄4" drive 6 point sockets. • Regular: 5⁄16" – 9⁄16" and 4 mm – 14 mm. • Deep: 5⁄32" – 1⁄2" and 4 mm – 13 mm. • 3⁄8" drive 6 point sockets. • Regular: 5⁄16" – 7⁄8" and 7 mm – 19 mm. • Deep: 1⁄4" – 3⁄4" and 8 mm – 19 mm. • 1⁄2" drive 6 point sockets. • 3⁄8" – 1" and 10 mm – 27 mm.

Part No.

Description

Shpg. Wt. (lbs.)

SKC125

125 Piece Set

25.0

205 PIECE SAE & METRIC SOCKET & WRENCH SET Set includes: • 1⁄4" drive: ratchet, extension 3", 6-point sockets 5⁄32 – 1⁄2" and 4 – 13 mm; 12-point sockets 3⁄16 – 1⁄2"; 6-point deep sockets 1⁄4 – 1⁄2" and 6 – 12 mm; torks bits T10 – T30. • 3⁄8" drive: ratchet; extension 3"; speeder handle; adapter 3⁄8" F x 1⁄4" M; 6-point spark plug sockets 5⁄8" and 13⁄16"; 6-point sockets 5⁄16 – 7⁄8" and 9 – 22 mm; 12-point sockets 5⁄16 – 7⁄8" and 10 – 19 mm; 6-point deep sockets 3⁄8 – 13⁄16" and 10 – 19 mm. • 1⁄2" drive: ratchet; extension 5"; flex bar 16"; 12-point sockets 1⁄2 – 11⁄4" and 10 – 19 mm. • Socket bits: Phillips #2 and #3, hex 1⁄8 – 3⁄8" and 4 – 10 mm, torks T40 - T55, slotted 1⁄4" and 9⁄32"; square #2 and #3. • Combination wrenches 5⁄16 – 15⁄16", hex keys 5⁄64 – 3⁄8" and 1.3 – 10 mm. • See pages 399 – 404 for complete listings.

Part No.

Description

Shpg. Wt. (lbs.)

SKC205

205 Piece Set

35.0

www.westwardtools.ca

W014-10.qxp

2/8/10

1:30 PM

Page 14

TOOL KITS 146 PIECE PROFESSIONAL SERIES SOCKET & WRENCH SET Set includes: • 1⁄4" drive: ratchet; extension 3"; 6 point sockets 5⁄32 – 9⁄16" and 4 – 14 mm; 6 point deep sockets 3⁄16 – 9⁄16" and 4 – 14 mm. • 3⁄8" drive: ratchet; extension 3"; 6 point spark plus sockets 5⁄8" and 13⁄16"; 6 point sockets 3⁄8 – 7⁄8" and 9 – 20 mm; 6 point deep sockets 3⁄8 – 7⁄8" and 9 – 19 mm. • 1⁄2" drive: ratchet; 6 point sockets 7⁄16 – 1" and 9 – 19 mm. • Combination wrenches 5⁄16 – 3⁄4" and 9 – 15 mm; hex keys 5⁄64 – 3⁄8"; ratcheting screwdriver handle. • Screwdriver bits: torks T10 – T20; Phillips #1, #2 and #3; slotted 1⁄4" and 9⁄32"; square #1 and #2.

Part No.

Description

Shpg. Wt. (lbs.)

SKC146

146 Piece Set

25.0

98 PIECE PROFESSIONAL SERIES 1⁄4" & 3⁄8" DRIVE SOCKET SET Set includes: • 1⁄4" drive: ratchet; extensions 2", 6"; spinner handle; universal joint; adapter 1⁄4" F x 3⁄8" M; 6-point sockets 5⁄32" – 1⁄2" and 4 mm – 13 mm; 6-point deep sockets 5⁄32" – 1⁄2" and 4 mm – 13 mm. • 3⁄8" drive: ratchet; extensions 3", 6", 10"; universal joint; 6-point sockets 5⁄16" – 13⁄16" and 8 mm – 19 mm; 6-point deep sockets 5⁄16" – 13⁄16" and 8 mm – 19 mm; spark plug sockets (2) 5⁄8" and 13⁄16".

Part No.

Description

Shpg. Wt. (lbs.)

SKC98

98 Piece Set

6.0

90 PIECE PROFESSIONAL SERIES 1⁄4", 3⁄8", & 1⁄2" DRIVE SOCKET SET •

drive: ratchet; extension 3"; 6-point sockets 5⁄32" – 1⁄2" and 4 mm – 13 mm; 12-point sockets 3⁄16" – 1⁄2"; 6-point deep sockets 3⁄16" – 5⁄16". • 3⁄8" drive: ratchet; extension 3"; 6-point spark plug sockets 5⁄8" and 13⁄16"; 6-point sockets 3⁄8" – 13⁄16" and 9 mm – 19 mm; 12-point sockets 3⁄8" – 13⁄16" and 9 mm – 19 mm; 6-point deep sockets 3⁄8" – 9⁄16". • 1⁄2" drive: ratchet; extension 5"; 12-point sockets 1⁄2" – 7⁄8".

1⁄4"

Part No.

Description

Shpg. Wt. (lbs.)

SKC90

90 Piece Set

18.0

www.westwardtools.ca

W015-10.qxp

2/8/10

1:31 PM

Page 15

TOOL KITS 66 PIECE TOOL KIT Set includes: • 1⁄4" drive: spinner handle; coupler 1⁄4" F Hex – 1⁄4" F; 6-point sockets 3⁄16" – 3⁄8" and 4 mm – 10 mm. • 3⁄8" drive: ratchet; extension 6"; adapter 3⁄8" F x 1⁄4" M; spark plug sockets 5⁄8" and 13⁄16"; 6-point sockets 3⁄8" – 3⁄4" and 10 mm – 19 mm. • Magnetic hex extension 21⁄2". • Screwdriver bits: Phillips #1, #2, #3; torks T10, T15, T20, T25, T30; square #1, #2; slotted 4 mm, 5.5 mm, 6.5 mm; hex 1⁄16" – 1⁄4" and 2.5 mm – 6 mm.

Part No.

Description

SKC66

66 Piece Kit

Shpg. Wt. (lbs.) 10.0

73 PIECE MULTITOOL KIT • •

• • • • •

1⁄4"

drive: spinner handle; 6-point sockets 3⁄16" – 1⁄2" and 4 mm – 13 mm. 3⁄8" drive: quick-release ratchet; 6-point sockets 3⁄8" – 3⁄4" and 11 mm – 17 mm; adapter 3⁄8" F x 1⁄4" M; extension 3"; spark plug socket – 5⁄8". Bit adapter. Bits: square #1, #2, #3; Phillips #1, #2, #3; slotted 4, 5.5, 6.5 mm. Combination wrenches – SAE 3⁄8, 7⁄16, 1⁄2, 9⁄16, 5⁄8"; metric 10, 12, 13, 14, 15 mm. Hex key – SAE 3⁄32, 1⁄8, 5⁄32, 3⁄16, 1⁄4"; metric 3, 4, 5, 6, 8 mm. Pliers: 6" long nose; 6" diagonal cutting and adjustable wrench – 8".

Part No.

Description

SKC73

73 Piece Kit

Shpg. Wt. (lbs.) 12.0

107 PIECE PROTOOL KIT Kit includes: • 1⁄4" drive: ratchet; spinner handle; extension 2"; 6-point sockets 5⁄32" – 1⁄2" and 4 mm – 13 mm; 6-point deep sockets 3⁄16" – 5⁄16" and 5 mm – 8 mm. • 3⁄8" drive: ratchet; extensions 3" and 6"; 6-point sockets 3⁄8" – 13⁄16" and 9 mm – 19 mm; 6-point deep sockets 3⁄8" – 3⁄4" and 10 mm – 14 mm; spark plug sockets 5⁄8" and 13⁄16". • Bit adapter. • Bits: torks (6) T10, T15, T20, T25, T30, T40; hex 3, 4, 5 mm; Phillips #1, #2, #3; slotted 4, 5.5, 6.5 mm; square #1, #2, #3. • Combination wrenches – SAE 3⁄8, 7⁄16, 1⁄2, 9⁄16, 5⁄8, 11⁄16"; metric 10, 12, 13, 14, 15, 17 mm. • Hex keys – SAE 3⁄32, 1⁄8, 5⁄32, 3⁄16, 1⁄4"; metric 3, 4, 5, 6, 8 mm. • 8 oz. ball pein hammer and compact hacksaw.

Part No.

Description

Shpg. Wt. (lbs.)

SKC107

107 Piece Kit

12.0

www.westwardtools.ca

W016-10.qxp

2/8/10

1:32 PM

Page 16

SPECIALTY TOOL KITS 60 PIECE AUTOMOTIVE TOOL KIT Contains common tools in both SAE and metric in a zipper case. Kit includes: • 1⁄4" drive: spinner handle; 6-point sockets 3⁄16", 7⁄32", 1⁄4", 9⁄32", 5⁄16" and 6, 7, 8, 9, 10, 11, 12, 13 mm. • 3⁄8" drive: ratchet; adapter 3⁄8" F x 1⁄4" M; 6-point sockets 3⁄8", 7⁄16", 1⁄2", 9⁄16", 5⁄8", 11⁄16", 3⁄4"; spark plug socket – 5⁄8". • Bit adapter. • Bits: torks T10, T15, T20, T25; Phillips #1, #2, #3; slotted 4, 5.5, 6.5 mm; square #1, #2, #3. • Pliers: 6" needle nose; 6" slip joint. • PVC tape; tire gauge; wire brush; hose clamps; cable ties.

Part No.

Description

SKC60

60 Piece Kit

Shpg. Wt. (lbs.) 6.0

66 PIECE ZIPIT KIT Contains common tools in both SAE and metric in a zipper case. Kit includes: • 1⁄4" drive: spinner handle; 6-point sockets 5⁄32", 3⁄16", 7⁄32", 1⁄4", 9⁄32", 5⁄16", 11⁄32", 3⁄8", 7⁄16", 1⁄2" and 4, 4.5, 5, 5.6, 6, 7, 8, 9, 10, 11, 12, 13 mm. • 3⁄8" drive: ratchet; 3" extension; adapter 3⁄8" F x 1⁄4" M; 6-point sockets 3⁄8", 7⁄16", 1⁄2", 9⁄16", 5⁄8", 11⁄16", 3⁄4"; spark plug socket – 5⁄8" and 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm. • Bit adapter. • Bits: torks T10, T15, T20, T25, T27; Phillips #0, #1, #2, #3; slotted 4, 4.5, 5.5, 6.5 mm; square #1, #2; Hex 2.5, 3, 4, 5, 6 mm.

Part No.

Description

Shpg. Wt. (lbs.)

SKC66Z

66 Piece Set

8.0

METRINCH® Each wall drive socket fits metric and SAE sizes and removes damaged nuts and bolts. Metrinch® ... The revolutionary “six-walldrive” design allows Metrinch® sockets to drive off the wall of the nut ... not the corners! The Metrinch® advantage ... • Grips worn nuts and bolts: Metrinch® grips the fastener walls so rounded corners are no longer a problem. • Manufactured from drop forged chrome vanadium steel. Metrinch® exceeds U.S., British, and German torque and hardness standards.

METRINCH® TOOL KIT • Equivalent to a 103 piece set. • 1⁄4" and 1⁄2" drive, ratchets, attachments and sockets from 3⁄16" (5 mm) to 11⁄8" (28 mm). • Magnetic screwdriver with hex adapter extension and 26 screwdriver bits. • 8" slip joint pliers. • 10" adjustable wrench.

Part No.

Description

MKC69

69 Piece Kit

Shpg. Wt. (lbs.) 17.0

www.westwardtools.ca

W017-10.qxp

2/8/10

1:33 PM

Page 17

SPECIALTY TOOL KITS

1⁄2"

DRIVE METRINCH® SOCKET SET

• 18 sockets 3⁄8" (10 mm) to 11⁄4" (32 mm). • Ratchet, 5" extension, flex handle and high impact case.

Part No.

Description

Shpg. Wt. (lbs.)

M3022

22 Piece Set

17.0

METRINCH® COMBINATION WRENCH SET • Covers 30 sizes. • 5⁄16" (8 mm) to 7⁄8" (22 and 23 mm).

Part No.

Description

Shpg. Wt. (lbs.)

CMIK30

14 Piece Set

10.0

MULTI-WRENCH/METRINCH® SOCKET SET • 12" multi-wrench (WSWFA12) with 1⁄2" drive ratchet adapter. • 19 Metrinch® sockets (SAE/metric) covering 3⁄8" (10 mm) to 11⁄4" (32 mm) – covers 43 sizes. • One 5" extension.

Part No.

Description

FHK23

23 Piece Kit

www.westwardtools.ca

Shpg. Wt. (lbs.) 9.9

W018-10.qxp

2/8/10

1:34 PM

Page 18

SPECIALTY TOOL KITS

The Vortex™ socket’s thin wall and arch design increase the torque strength by as much as 40%.

• The patented GearRatchet™ is the next generation in ratchets and sockets! • The unique design has an ultra low profile, extra strength, and the speed of a 5° precision movement. • The GearRatchet™ Vortex™ Socket System has a complete line of SAE and metric sockets.

REDUCED MORE THAN 30%

For convenient usage, the GearRatchet™ quickly converts to a conventional 1⁄4" and 3⁄8" ratchet for standard sockets and drive tools by using the two included adapters.

19 mm GEARRATCHET™ SYSTEM

19 mm CONVENTIONAL RATCHET SYSTEM

Slim profile design, overall height is reduced by as much as 50%, width by 20%.

1⁄4"

• • • • • • • • • •

3⁄8"

DRIVE

1⁄4"

DRIVE

DRIVE 23 PIECE GEARRATCHET™ SOCKET SET

1 – GearRatchet™ 13 mm handle. 1⁄4" drive equivalent. 1 – Vortex™ 1⁄4" bit holder. 9 – Vortex™ SAE Sockets: 5⁄32", 3⁄16", 7⁄32", 1⁄4", 9⁄32", 5⁄16", 3⁄8", 7⁄16", 1⁄2". 12 – Bits. Phillilps: 1, 2 and 3. Slotted: 5⁄32", 7⁄32", and 9⁄32". Torx®: T-10, T-15, and T-20. Hex: 1⁄8", 5⁄32", and 3⁄16".

Part No.

Description

Shpg. Wt. (lbs.)

VK1423

23 Piece Set

1.0

1⁄4"

DRIVE GEARRATCHET™ SOCKET SET

Set Includes: • 9 1⁄4" drive SAE Vortex™ sockets: 5⁄32", 3⁄16", 7⁄32", 1⁄4", 9⁄32", 5⁄16", 3⁄8", 7⁄16", 1⁄2". • 13 1⁄4" drive metric Vortex™ sockets: 3.5, 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13 mm. • 1 1⁄4" drive GearRatchet™ handle. • 3 – Vortex™ hollow 11⁄4", 3", 6" extension. • 1 1⁄4" drive quick release adapter. • 1 1⁄4" drive bit adapter. • 20 assorted bits.

Part No.

Description

Shpg. Wt. (lbs.)

VK1448

48 Piece Set

7.3

www.westwardtools.ca

W019-10.qxp

2/8/10

1:36 PM

Page 19

SPECIALTY TOOL KITS

3⁄8"

DRIVE GEARRATCHET™ SOCKET SET

Set Includes: • Ratcheting handle. • 7 SAE sockets: 3⁄8", 7⁄16", 1⁄2", 9⁄16", 5⁄8", 11⁄16", 3⁄4". • 10 metric sockets: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm. • Ratcheting pass through 3" extension. • 1⁄4" drive adapter. • 3⁄8" drive adapter. • High impact case.

Part No.

Description

Shpg. Wt. (lbs.)

VK3823

22 Piece Set

9.4

1⁄2"

DRIVE GEARRATCHET™ SOCKET SET

Set Includes: • 1 1⁄2" drive GearRatchet™ handle. • 2 1⁄2" drive extension 3", 6". • 8 1⁄2" drive metric Vortex™ sockets. • 8 SAE sockets: 3⁄4", 13⁄16", 7⁄8", 15⁄16", 1", 11⁄16", 11⁄8" 11⁄4". • 1 1⁄2" drive x 1⁄2" M quick release adapter. • 1 1⁄2" drive x 3⁄8" M quick release adapter.

Part No.

Description

Shpg. Wt. (lbs.)

VK1221

21 Piece Set

11.3

64 PIECE SAE & METRIC BLACK CHROME TOOL KIT • Unique high gloss black chrome plating. • Laser etched high-visibility markings. 1⁄4" and 3⁄8" drive set includes: • 1⁄4" drive SAE and metric sockets. • 3⁄8" drive SAE and metric sockets. • 3⁄8" drive deep metric sockets. • Spark plug socket. • 1⁄4" x 3" and 3⁄8" x 6" extension bars. • 1⁄4" and 3⁄8" drive ratchets. • SAE and metric stubby wrenches.

Part No.

Description

Shpg. Wt. (lbs.)

BKC64

64 Piece Set

21.0

www.westwardtools.ca

W020-10.qxp

2/8/10

1:40 PM

Page 20

SPECIALTY TOOL KITS 91 PIECE BLACK CHROME MECHANICS TOOL SET • Unique high gloss black chrome plating. • Laser etched high-visibility markings. • SAE and metric sizes. 1⁄2", 3⁄8", 1⁄4" drive set includes: • 1⁄4" drive 6 point SAE and metric sockets. • 1⁄4" drive 6 point deep metric sockets. • 1⁄4" drive spinner handle. • 3⁄8" drive 6 point SAE and metric sockets. • 3⁄8" drive 6 point deep metric sockets. • 3⁄8" drive 8 point SAE sockets. • 3⁄8 drive 6 point SAE spark plug socket. • 1⁄2" drive 12 point SAE and metric sockets. • 1⁄4", 3⁄8" and 1⁄2" drive ratchet with polished handle. • 1⁄4" x 3", 3⁄8" x 6 and 1⁄2" x 21⁄2" extension bars. • SAE combination wrenches.

Part No.

Description

Shpg. Wt. (lbs.)

BKC91

91 Piece Set

34.0

155 PIECE BLACK CHROME MECHANICS TOOL KIT The Mechanics Tool Set includes a wide variety of regular and deep length sockets in 6 point design, 1⁄4", 3⁄8", and 1⁄2" drive ratchets and attachments, 12 long length wrenches the professionals use, and hex keys in popular SAE and metric sizes. The Mechanics screwdriver comes complete with 44 bits to tackle most jobs. A handy magnetic tray to hold your parts and fastener during a job, and a heavy-duty storage case with secure lock-in-place tools are also included. • Unique high gloss black chrome plating. • Laser etched high-visibility markings.

Part No.

Description

Shpg. Wt. (lbs.)

BKC155

155 Piece Kit

40.0

BLACK CHROME COMBINATION WRENCH SETS • • • •

High gloss black chrome plating. Laser etched high-visibility markings. SAE and metric. Box and open end.

Part No.

Description

Shpg. Wt. (lbs.)

CBK14

Includes 14 Wrenches

CBK16M

Includes 16 Wrenches 7 mm to 24 mm

3⁄8"

11⁄4"

9.8 7.0

www.westwardtools.ca

W021-10.qxp

2/8/10

1:41 PM

Page 21

STAINLESS STEEL TOOLS

13 PIECE 3⁄8" DRIVE 6 POINT STAINLESS STEEL SOCKET SET – SAE • • • •

4430 stainless steel. Autoclavable. Can be used in rain, snow and salt water environments. Complies with Aerospace FOD programs in areas of foreign contaminents such as nickel/chrome plating chipping off. • Meets or exceeds AS-954. Contains: • Ratchet and 3" extension. • 10 sockets from 1⁄4" to 13⁄16".

Part No.

Description

SK3813S1

Stainless Steel Socket Set

Shpg. Wt. (lbs.) 2.8

15 PIECE 3⁄8" DRIVE 6 POINT STAINLESS STEEL SOCKET SET • • • •

Part No.

Description

MSK3815S1

Stainless Steel Socket Set

3⁄8"

Shpg. Wt. (lbs.) 2.9

DRIVE STAINLESS STEEL RATCHET

• • • •

Part No.

Description

SA38S1

Ratchet

1.5

SA38S1RK

Ratchet Repair Kit

0.1

www.westwardtools.ca

Shpg. Wt. (lbs.)

W022-10.qxp

2/8/10

1:47 PM

Page 22

STAINLESS STEEL TOOLS

3⁄8"

DRIVE STAINLESS STEEL EXTENSIONS

• 4430 stainless steel. • Autoclavable. • Can be used in rain, snow and salt water environments. • Complies with Aerospace FOD programs in areas of foreign contaminents such as nickel/chrome plating chipping off. • Meets or exceeds AS-954.

Part No.

Description

SA383S1

Extension Bar, 3"

0.2

SA385S1

Extension Bar, 5"

0.4

Part No.

Description

SS3862S1

Socket, 1⁄4"

SS39864S1 3⁄8"

DRIVE STAINLESS STEEL SAE SOCKETS

3⁄8"

DRIVE STAINLESS STEEL METRIC SOCKETS • 4430 stainless steel. • Autoclavable. • Can be used in rain, snow and salt water environments. • Complies with Aerospace FOD programs in areas of foreign contaminents such as nickel/chrome plating chipping off. • Meets or exceeds AS-954. • Sockets are 6 point.

Socket,

5⁄16"

SS386AS1

Socket,

3⁄8"

SS386BS1

Socket, 7⁄16"

SS386CS1

Shpg. Wt. (lbs.)

Shpg. Wt. (lbs.) 0.1 0.1 0.1 0.1

Socket,

1⁄2"

SS386DS1

Socket,

9⁄16"

SS386FS1

Socket, 5⁄8"

SS386HS1

Socket,

SS386IS1

Socket, 3⁄4"

0.2

SS386KS1

Socket,

0.2

Part No.

Description

Shpg. Wt. (lbs.)

MS38608S1

Socket, 8 mm

0.1

MS38609S1

Socket, 9 mm

0.1

MS38610S1

Socket, 10 mm

0.1

MS38611S1

Socket, 11 mm

0.1

MS38612S1

Socket, 12 mm

0.1

MS38613S1

Socket, 13 mm

0.1

MS38614S1

Socket, 14 mm

0.1

MS38615S1

Socket, 15 mm

0.1

MS38616S1

Socket, 16 mm

0.1

MS38617S1

Socket, 17 mm

0.1

MS38618S1

Socket, 18 mm

0.2

MS38619S1

Socket, 19 mm

0.2

11⁄16"

13⁄16"

0.1 0.1 0.1 0.1

www.westwardtools.ca

W023-10.qxp

2/8/10

1:48 PM

Page 23

TOOL STORAGE WIDE MOUTH TOOL BAG 13" • Water-resistant 600 denier polyester. • 18 interior and exterior pockets. • Reinforced opening with metal frame for strength and stability. • Sturdy zipper for long life.

Part No. TP323

Dimensions (in.)

Shpg. Wt. (lbs.)

12.6 L x 8.3 W x 8.7 H

1.4

HARD BOTTOM TOOL BAG 16" • • • •

Water-resistant 600 denier polyester. 14 interior and exterior pockets. Shoulder strap and carrying handle. Sturdy zipper for long life.

Part No. TP416

Dimensions (in.)

Shpg. Wt. (lbs.)

16.8 L x 8.9 W x 12.4 H

4.5

161⁄2" SOFT-SIDED TOOL BAG • Durable, lightweight polyester fabric with PVC reinforced backing resists water, punctures, and tears. • Heavy-duty stitching and bar tacking at stress points add extra durability. • 11 pockets.

Part No.

Dimensions (in.)

Shpg. Wt. (lbs.)

TP411A

16.5 L x 8.5 W x 10 H

3.4

DOUBLE SOFT-SIDED TOOL BAG 20" • Water-resistant 600 denier polyester. • 10 interior and exterior pockets, 1 tool loop and a removable zippered pouch with 7 tool loops. • Shoulder strap and carrying handle. • Sturdy zipper for long life.

Part No.

Dimensions (in.)

Shpg. Wt. (lbs.)

TP410D

19.7 L x 12.6 W x 11.8 H

4.9

www.westwardtools.ca

W024-10.qxp

2/8/10

1:49 PM

Page 24

TOOL STORAGE WIDE MOUTH TOOL BAG 20" • • • • •

Water-resistant 600 denier polyester. 12 interior and exterior pockets, 6 tool loops. Reinforced opening with metal frame for strength and stability. Shoulder strap and carrying handle. Sturdy zipper for long life.

Part No. TP336

Dimensions (in.)

Shpg. Wt. (lbs.)

20.5 L x 11.8 W x 13.8 H

3.7

TOOL BAG 22" TOOLS NOT INCLUDED

• Water-resistant 600 denier polyester. • 11 interior and exterior pockets, 6 tool loops and a plastic parts tray. • Reinforced opening with metal frame for strength and stability. • Shoulder strap and carrying handle. • Sturdy zipper for long life.

Part No.

Dimensions (in.)

Shpg. Wt. (lbs.)

TP420

22 L x 9.8 W x 13 H

5.1

POWER TOOL TOTE BAG • Water-resistant 600 denier polyester. • 4 interior and exterior pockets, 16 tool loops and a power drill pocket. • Shoulder strap.

Part No. TP407

Dimensions (in.)

Shpg. Wt. (lbs.)

10.3 L x 8.7 W x 10.2 H

3.4

16" ROLLING BAG • • • • •

Water-resistant 600 denier polyester. 14 interior and exterior pockets, 6 tool loops. Heavy-duty stitching and bar tacking for durability. Extendable handle. 4" wheels.

Part No. TP307

Dimensions (in.)

Shpg. Wt. (lbs.)

16 L x 11.4 W x 17.3 H

7.3

www.westwardtools.ca

W025-10.qxp

2/8/10

1:50 PM

Page 25

TOOL STORAGE BUCKET TOOL BOX Part No.

Description

TP700B

600 D Polyester

Shpg. Wt. (lbs.) 2.0

TOOL APRON Tool apron, adjustable straps, 18 pockets.

Part No.

Description

TP500A

Tool Apron

Shpg. Wt. (lbs.) 1.3

TOOL VEST • Multi-pocket/holder design. • Adjustable side straps.

Part No.

Description

TP510V

Tool Vest

Shpg. Wt. (lbs.) 2.2

PARTS ORGANIZER • Organize and store a variety of items. • Clear lid. • Various sizes available.

Overall Dimensions (in.) L x W x H

Shpg. Wt. (lbs.)

Parts Organizer

8 x 5 x 11⁄2

2.0

Parts Organizer

10 x 6 x 3

2.0

Part No.

Description

TBP20P TBP23P TBP38P

Parts Organizer

14 x 11 x

31⁄2

2.0

WRENCH HOLDERS Provides compact storage for wrenches. Can be hung on wall or stored in tool box. Constructed of high impact plastic.

Part No.

Capacity

Range

Shpg. Wt. (lbs.)

A16

12 Wrenches

1⁄4"

- 3⁄4" (7 mm - 19 mm)

0.5

A17

15 Wrenches

1⁄4"

- 1" (7 mm - 26 mm)

0.7

www.westwardtools.ca

W026-10.qxp

2/8/10

1:50 PM

Page 26

TOOL STORAGE MAGNETIC TOOL STORAGE BAR Holds sockets, wrenches, screwdrivers and small parts.

Part No.

Description

A15

173⁄4"

Shpg. Wt. (lbs.)

Magnetic Bar

0.9

SOCKET CLIP BARS Part No.

Description

UL25

1⁄4"

Shpg. Wt. (lbs.)

Drive Socket Rail

0.3

UL35

3⁄8"

Drive Socket Rail

0.3

UL50

1⁄2"

Drive Socket Rail

0.3

ULK3

1⁄4", 3⁄8", 1⁄2"

Set

1.0

21" TOOL BOX Storage capacity – 1,613 cu. in.

Part No. B520

Width (in.)

Depth (in.)

Height (in.)

Shpg. Wt. (lbs.)

83⁄4

10.8

Width (in.)

Depth (in.)

Height (in.)

Shpg. Wt. (lbs.)

83⁄4

20.5

Width (in.)

Depth (in.)

Height (in.)

Shpg. Wt. (lbs.)

83⁄4

14.0

Width (in.)

Depth (in.)

Height (in.)

Shpg. Wt. (lbs.)

211⁄4

83⁄4

16.2

32" INDUSTRIAL BOX Storage capacity – 2,439 cu. in.

Part No. B632

26" TOOL BOX Storage capacity – 1,980 cu. in.

Part No. B522

4 TRAY CANTILEVER TOOL BOX Storage capacity – 1,971 cu. in.

Part No. B529

www.westwardtools.ca

W027-10.qxp

2/8/10

1:51 PM

Page 27

TOOL STORAGE STAINLESS STEEL TOOL BOX • Includes plastic tote tray. • Resists rust and corrosion.

Part No.

Width (in.)

Depth (in.)

Height (in.)

Shpg. Wt. (lbs.)

TBC20S

20.0

9.6

8.8

6.0

TBC26S

26.0

11.0

8.9

STAINLESS STEEL ROLLER COMBO • Rugged stainless steel construction. • Includes tool tray. • Externally lockable. • Extendable handle. • Wheeled for easy transport. Includes: • 1 roller tool box. • 1 carry tool box.

Part No.

Width (in.)

Depth (in.)

Height (in.)

Shpg. Wt. (lbs.)

TBC20SK

24.4

14.6

24.4

20.9

JUMBO PLASTIC ROLLER BOX • • • •

Large interior tote tray. Retractable handle that extends to 36" height. 2 side latches lockable with padlocks and two 5" wheels. Dimensions: 25" x 171⁄2" x 18".

Part No.

Width (in.)

Depth (in.)

Height (in.)

Shpg. Wt. (lbs.)

TBC24P

171⁄2

18.0

WESTWARD INSTRUMENT CASES Provides water resistant protection, specially designed and complete with wave foam to handle extra protection for both specialized applications and everyday hazards. • Water-resistant. • Top lid complete with 1 piece wave foam. • Bottom lid complete with 1 piece wave foam and 1 piece of customizable foam. • 2 latch closure. • Purge dial.

Part No.

Dimensions (cm) LxWxH

TCH21BK

21 x 16.7 x 9

Black

0.1

TCH33BK

33 x 28 x 12

Black

0.1

TCH43BK

43 x 38 x 14.4

Black

0.1

TCH48BK

47.5 x 39 x 20

Black

0.1

TCH52BK

51.5 x 41.5 x 20

Black

0.1

www.westwardtools.ca

Colour

Shpg. Wt. (lbs.)

W028-10.qxp

2/8/10

1:52 PM

Page 28

TOOL STORAGE

HEAVY-DUTY 3 DRAWER SERVICE CART • • • • • •

3 full-width drawers with ball bearing slides. Locking function for extra security. Upper cover with gas strut for easy lid opening. 4" deep storage top with 4 cantilever trays. 5" swivel casters (2 with brakes). Powder coated finish.

Part No.

Width (in.)

Depth (in.)

Height (in.)

Shpg. Wt. (lbs.)

TB303SC

30.0

16.0

39.0

110.0

1 DRAWER UTILITY CART • • • •

Ball bearing drawer slides. Extruded aluminum drawer pull. 4" x 1" casters. Stainless steel legs.

Part No. TB302SCBK

Width (in.)

Depth (in.)

Height (in.)

Shpg. Wt. (lbs.)

30.0

16.1

35.0

52.8

3 DRAWER UTILITY CART • Ball bearing drawer slides. • Extruded aluminum drawers. • 4" x 11⁄4" casters.

Part No. TB303SCBK

Width (in.)

Depth (in.)

Height (in.)

Shpg. Wt. (lbs.)

30.4

20.1

34.5

107.8

UTILITY STORAGE BOXES • Diamond plate finish. • Lockable hasps. • Keyed Locks with 2 keys included.

Width (in.)

Depth (in.)

Height (in.)

Shpg. Wt. (lbs.)

TBT1430

30.5

14.3

10.1

29.0

TBT1549

49.4

15.4

15.0

50.2

Part No.

www.westwardtools.ca

W029-10.qxp

2/8/10

1:52 PM

Page 29

TOOL STORAGE

3-DRAWER 21" PORTABLE TOOL CHEST • Powder coating finish. • 2 nickel plated draw pull catches. • Box cover automatically locks drawers when cover is shut. • Plastic comfort-grip handle is strength tested for durability. • Aluminum extrusion drawers.

Part No.

Width (in.)

Depth (in.)

Height (in.)

Shpg. Wt. (lbs.)

TBH2103

207⁄8

85⁄8

113⁄16

24.0

3-DRAWER 26" INTERMEDIATE CHEST • Ball-bearing slides ensure smooth drawer operation. • Soft detents ensure drawers are kept closed during movement. • Insert labels for drawer fronts. • Lock and key. • Drawer mats.

Part No. TB2603MS

Width Depth Height (in.) (in.) (in.) 26.4

12.4

10.4

Capacity Shpg. Wt. (lbs.) (lbs.) 132.0

42.3

6-DRAWER 26" TOP CHEST • Ball-bearing slides ensure smooth drawer operation. • Soft detents ensure drawers are kept closed during movement. • Insert labels for drawer fronts. • Lock and key. • Drawer mats.

Part No. TB2606TS

Width (in.) 26.0

Depth Height (in.) (in.) 12.1

14.8

Capacity Shpg. Wt. (lbs.) (lbs.) 176.0

62.8

9-DRAWER 26" TOP CHEST • Ball-bearing slides ensure smooth drawer operation. • Detents ensure drawers are kept closed during movement. • Insert labels for drawer fronts. • Lock and key. • Drawer mats.

Part No. TB2609TS

Width (in.)

Depth (in.)

Height (in.)

26.0

12.1

17.1

www.westwardtools.ca

Capacity Shpg. Wt. (lbs.) (lbs.) 220.0

70.0

W030-10.qxp

2/8/10

1:53 PM

Page 30

TOOL STORAGE

12-DRAWER 26" TOP CHEST • • • • • •

Ball-bearing slides ensure smooth drawer operation. Detents ensure drawers are kept closed during movement. Insert labels for drawer fronts. Lock and key. Drawer mats. Removable tool tray.

Part No. TB2612THD

Width Depth Height Capacity Shpg. Wt. (in.) (in.) (in.) (lbs.) (lbs.) 26.3

17.5

19.3

400.0

118.9

3-DRAWER 27" ROLLER CABINET • • • •

Ball-bearing slides ensure smooth drawer operation. Soft detents ensure drawers are kept closed during movement. Lock and key. Drawer mats.

Part No. TB2603RL

Width Depth Height Capacity Shpg. Wt. (in.) (in.) (in.) (lbs.) (lbs.) 27.1

18.0

34.8

770.0

124.4

6-DRAWER 27" ROLLER CABINET • • • • •

Ball-bearing slides ensure smooth drawer operation. Soft detents ensure drawers are kept closed during movement. Insert labels for drawer fronts. Lock and key. Drawer mats.

Part No. TB2606RHD

Width Depth Height Capacity Shpg. Wt. (in.) (in.) (in.) (lbs.) (lbs.) 27.1

18.0

34.8

352.0

163.0

7-DRAWER 27" ROLLER CABINET • • • • •

Ball-bearing slides ensure smooth drawer operation. Soft detents ensure drawers are kept closed during movement. Insert labels for drawer fronts. Lock and key. Drawer mats.

Part No. TB2607RL

Width Depth Height Capacity Shpg. Wt. (in.) (in.) (in.) (lbs.) (lbs.) 27.1

18.0

34.8

770.0

163.6

www.westwardtools.ca

W031-10.qxp

2/8/10

1:54 PM

Page 31

TOOL STORAGE 6-DRAWER 26" TOP CHEST • Chests have double-wall construction. • Chests with full-length piano hinge. • One piece drawer slide made of 22 gauge for long lasting use. • Internal drawer locking system with key lock provides security. • Powder coated finish provides superior metal protection.

Part No. B803

Width (in.)

Depth (in.)

Height (in.)

Shpg. Wt. (lbs.)

141⁄2

55.0

11-DRAWER 40" CHEST • Chests have double-wall construction. • Chests with full-length piano hinge. • One piece drawer slide made of 22 gauge for long lasting use. • Internal drawer locking system with key lock provides security. • Powder coated finish provides superior metal protection.

Part No. B860

Width (in.)

Depth (in.)

Height (in.)

Shpg. Wt. (lbs.)

401⁄2

177⁄8

201⁄2

139.0

10-DRAWER 26" TOP CHEST • Chests have double wall construction. • Chests with full-length piano hinge. • One piece drawer slide made of 22 gauge for long lasting use. • Internal drawer locking system with key lock provides security. • Powder coated finish provides superior metal protection.

Part No. B810

Width (in.)

Depth (in.)

Height (in.)

Shpg. Wt. (lbs.)

177⁄8

201⁄2

99.0

3-DRAWER 27" ROLLER CABINET • Cabinets have double-wall construction. • One piece drawer slide made of 22 gauge for longer lasting use. • Internal drawer locking system with key lock provides security. • Powder coated finish provides superior metal protection.

Part No. B899

Width (in.)

Depth (in.)

Height (in.)

Shpg. Wt. (lbs.)

183⁄4

355⁄8

90.0

www.westwardtools.ca

W032-10.qxp

2/8/10

1:55 PM

Page 32

TOOL STORAGE

5-DRAWER 27" ROLLER CABINET • Cabinets have double-wall construction. • One piece drawer slide made of 22 gauge for longer lasting use. • Internal drawer locking system with key lock provides security. • Powder coated finish provides superior metal protection.

Part No. B891

Width (in.)

Depth (in.)

Height (in.)

Shpg. Wt. (lbs.)

183⁄4

355⁄8

109.0

11-DRAWER 27" ROLLER CABINET • Cabinets have double-wall construction. • One piece drawer slide made of 22 gauge for longer lasting use. • Internal drawer locking system with key lock provides security. • Powder coated finish provides superior metal protection.

Part No. B896

Width (in.)

Depth (in.)

Height (in.)

Shpg. Wt. (lbs.)

183⁄4

423⁄8

151.0

16-DRAWER 42" ROLLER CABINET • Cabinets have double-wall construction. • One piece drawer slide made of 22 gauge for longer lasting use. • Internal drawer locking system with key lock provides security. • Powder coated finish provides superior metal protection.

Part No. B853

Width (in.)

Depth (in.)

Height (in.)

Shpg. Wt. (lbs.)

411⁄2

183⁄4

423⁄8

233.0

8 DRAWER SIDE CABINET FOR B896-853-854 • Double-wall construction. • Strong attachment hook. • Powder coated finish provides superior metal protection. • Internal drawer locking system with key lock provides security.

Part No. B848

Width (in.)

Depth (in.)

Height (in.)

Shpg. Wt. (lbs.)

183⁄4

371⁄16

92.0

www.westwardtools.ca

W033-10.qxp

2/8/10

1:55 PM

Page 33

TOOL STORAGE

7 DRAWER SIDE CABINET FOR B899-891 • • • •

Double-wall construction. Strong attachment hook. Powder coated finish provides superior metal protection. Internal drawer locking system with key lock provides security.

Part No. B842

Width (in.)

Depth (in.)

Height (in.)

Shpg. Wt. (lbs.)

183⁄4

301⁄2

83.0

41" – 10 DRAWER CHEST • • • • • •

Ball bearings slides on all drawers. Double wall steel construction. High gloss powder coat scratch resistant paint. Extruded aluminum drawer handle trim. Comes with pre-cut drawer liners. Gas struts are in the lid for ease in opening and closing the lid.

Part No. VRT4210BK

Width (in.)

Depth (in.)

Height (in.)

Shpg. Wt. (lbs.)

407⁄8

191⁄4

80.0

42" – 11 DRAWER ROLLER CABINET • • • • • •

Ball bearings slides on all drawers. Double wall steel construction. High gloss powder coat scratch resistant paint. Extruded aluminum drawer handle trim. Heavy duty casters: 5" x 2". Comes with pre-cut drawer liners.

Part No. VRB4211BK

Width (in.)

Depth (in.)

Height (in.)

Shpg. Wt. (lbs.)

411⁄2

397⁄8

225.0

SIDE LOCKERS FOR 42" VALUE SERIES • • • • • •

Width (in.)

Depth (in.)

Height (in.)

Shpg. Wt. (lbs.)

VRS4200BK

331⁄2

43.0

VRS4201BK

151⁄2

181⁄4

80.0

Part No.

www.westwardtools.ca

W034-10.qxp

2/8/10

1:56 PM

Page 34

TOOL STORAGE 56" – 6 DRAWER CHEST • • • • • •

Ball bearings slides on all drawers. Double wall steel contruction. High gloss powder coat scratch resistant paint. Extruded aluminum drawer handle trim. Comes with pre-cut drawer liners. Gas struts are in the lid for ease in opening and closing the lid.

Part No. VRT5606BK

Width (in.)

Depth (in.)

Height (in.)

Shpg. Wt. (lbs.)

551⁄2

191⁄8

225.0

56" – 10 DRAWER ROLLER CABINET • • • • • •

Ball bearings slides on all drawers. Double wall steel contruction. High gloss powder coat scratch resistant paint. Extruded aluminum drawer handle trim. Heavy-duty casters: 5" x 2". Comes with pre-cut drawer liners.

Part No. VRB5610BK

Width (in.)

Depth (in.)

Height (in.)

Shpg. Wt. (lbs.)

561⁄2

391⁄2

355.0

FULL LOCKER FOR 56" VALUE SERIES • • • • • •

Part No. VRS5600BK

Width (in.)

Depth (in.)

Height (in.)

Shpg. Wt. (lbs.)

106.0

8-DRAWER 27" ROLL CABINET WITH SLIDE OUT • • • •

Quick lock ball bearing slides. Top mat and drawer liners. 5" x 2" casters. Aluminum extrusion drawer pulls.

Part No. TB2707SLBK

Width (in.)

Depth (in.)

Height (in.)

Shpg. Wt. (lbs.)

26.6

18.0

33.5

159.0

www.westwardtools.ca

W035-10.qxp

2/8/10

1:57 PM

Page 35

TOOL STORAGE

9-DRAWER 41" TOP CHEST • Double-wall construction. • Ball bearing slide with tab system allows easy drawer removal. • Internal drawer locking system with tubular lock and key provides security. • Full width drawer pull for easy grip. • Powder coated finish provides superior metal protection. • All drawers with pre-cut drawer liners.

Part No. BR865

Width (in.)

Depth (in.)

Height (in.)

Shpg. Wt. (lbs.)

411⁄2

211⁄8

243.0

10-DRAWER 34" TOP CHEST • Heavy gauge metal, all-welded construction. • All drawers are 16 inches deep, and supplied with pre-cut drawer liners. • Ball bearing slide with tab system allows easy drawer removal.

Part No.

Width (in.)

Depth (in.)

Height (in.)

Shpg. Wt. (lbs.)

177⁄8

201⁄2

146.0

BR710

8-DRAWER 35" ROLLER CABINET • Heavy gauge metal, all-welded construction. • All drawers are 16 inches deep, and supplied with pre-cut drawer liners. • Ball bearing slide with tab system allows easy drawer removal.

Part No. BR796

Width (in.)

Depth (in.)

Height (in.)

Shpg. Wt. (lbs.)

183⁄4

423⁄8

218.0

15-DRAWER 42" MOBILE WORK STATION • Double-wall construction. • Ball bearing slide with tab system allows easy drawer removal. • Internal drawer locking system with key lock provides security. • Full width drawer pull for easy grip. • Powder coated finish provides superior metal protection. • All drawers with pre-cut drawer liners.

Part No. BR854

Width (in.)

Depth (in.)

Height (in.)

Shpg. Wt. (lbs.)

411⁄2

183⁄4

423⁄8

255.0

www.westwardtools.ca

W036-10.qxp

2/8/10

1:57 PM

Page 36

TOOL STORAGE

SUPER HEAVY-DUTY SERIES – 42" WIDE 4 DRAWER CHEST • Rigidity of frame is significantly increased with full height and width triple channel inner wall. • Three layers of metal reinforce the corners with new interlock corner design. • Two pairs of 120 lb. rated ball bearing slides on all drawers over 2" deep. • Gas struts help to easily open the chest lid. • Open till top makes tools in the top compartment more visible. • New Safe-Lock drawer system prevents drawer from accidental opening. • Includes pre-cut drawer liners.

Part No.

Width (in.)

Depth (in.)

Height (in.)

Shpg. Wt. (lbs.)

BL02981

4115⁄32

2415⁄32

223⁄4

231.0

SUPER HEAVY-DUTY SERIES – 5 DRAWER 42" CABINET • Frame is reinforced using 14 gauge plates on the bottom of the cabinet. • Rigidity of frame is significantly increased with full height and width triple channel inner wall. • Three layers of metal reinforce the corners with new interlock corner design. • Two pairs of 120 lb. rated ball bearing slides on all drawers over 2" deep. • 6" x 2" precision ball bearing casters are made of thermoplastic rubber. • New Safe-Lock drawer system prevents drawer from accidental opening. • Includes pre-cut drawer liners.

Tool Chest Sold Separately

Part No.

Width (in.)

Depth (in.)

Height (in.)

Shpg. Wt. (lbs.)

BL02941

411⁄2

241⁄2

421⁄8

363.0

13 DRAWER MOBILE WORK STATION • Double-wall construction. • Ball bearing slide with tab system allows easy drawer removal. • Internal drawer locking system with key lock provides security. • Full width drawer pull for easy grip. • Powder coated finish provides superior metal protection. • All drawers with pre-cut drawer liners.

Part No. BR855

Width (in.)

Depth (in.)

Height (in.)

Shpg. Wt. (lbs.)

411⁄2

243⁄8

435⁄8

422.0

www.westwardtools.ca

W037-10.qxp

2/8/10

1:58 PM

Page 37

TOOL STORAGE

HEAVY-DUTY 42" 9 DRAWER TOOL CHEST WITH BALL BEARING SLIDE • • • • •

Dimensions 41.1" W x 15.5" D x 20.5" H. All ball bearing slides. Heavy-duty side handles. Drawer sides have rolled edge for extra security. Tough finish.

Part No. TB4209HD

Width (in.)

Depth (in.)

41.4

15.5

Height Capacity Shpg. (in.) (lbs.) Wt. (lbs.) 20.5

440.0

178.0

HEAVY-DUTY 42" 13 DRAWER ROLLER CABINET WITH BALL BEARING SLIDE • • • •

All ball bearing slides. Heavy-duty side handles. Drawer sides have rolled edge for extra security. Tough finish.

Part No. TB4213HD

Width (in.)

Depth (in.)

Height (in.)

41.5

18.0

41.4

Capacity Shpg. (lbs.) Wt. (lbs.) 726.0

298.5

EXTRA WIDE HEAVY-DUTY 56" ROLL CABINET • Wrinkle finish. • Heavy-duty frame design. • 6" x 2" casters.

Part No. TB5611RHD

Width Depth Height Capacity Shpg. Wt. (in.) (in.) (in.) (lbs.) (lbs.) 56.5

22.0

42.3

www.westwardtools.ca

1,000.0

584.8

W038-10.qxp

2/8/10

1:59 PM

Page 38

TOOL STORAGE

EXTRA WIDE 56" HEAVY-DUTY TOOL CHEST • • • •

Wrinkle finish. Ball bearing drawer slides. Gas spring lid. Heavy-duty frame design.

Part No. TB5605THD

Width (in.) 56.5

Depth Height Capacity Shpg. Wt. (in.) (in.) (lbs.) (lbs.) 22.0

25.4

495.0

301.0

SUPER HEAVY-DUTY SERIES – CANOPIES • Gas struts help to easily open the chest lid. • Canopy features steel pegboard back and side knock-outs for electrical cords.

Part No.

Width (in.)

Depth (in.)

Height (in.)

Shpg. Wt. (lbs.)

B000242

237⁄8

181⁄4

71.0

B000254

273⁄4

110.0

SUPER HEAVY-DUTY SERIES – 12 DRAWER 54" CABINET • Frame is reinforced using 14 gauge plates on the bottom of the cabinet. • Rigidity of frame is significantly increased with full height and width triple channel inner wall. • Three layers of metal reinforce the corners with new interlock corner design. • Two pairs of 120 lb. rated ball bearing slides on all drawers over 2" deep. • 6" x 2" precision ball bearing casters are made of thermoplastic rubber. • New Safe-Lock drawer system prevents drawer from accidental opening. • Includes pre-cut drawer liners.

Part No.

Width (in.)

Depth (in.)

Height (in.)

Shpg. Wt. (lbs.)

BL02954

531⁄2

241⁄2

43.0

410.0

www.westwardtools.ca

W039-10.qxp

2/8/10

2:00 PM

Page 39

TOOL STORAGE

72" – 12 DRAWER TOP BOX • Heavy-duty frame design. • Heavy-duty ball bearing drawer slides.

Part No.

Width (in.)

Depth (in.)

Height (in.)

Shpg. Wt. (lbs.)

TB7212THD

73.46

29.33

26.1

755.0

72" – 20 DRAWER ROLL CABINET • Heavy-duty frame design. • 6" x 2" casters. • Heavy-duty ball bearing drawer slides.

Part No.

Width (in.)

Depth (in.)

Height (in.)

Shpg. Wt. (lbs.)

TB7220RHD

73.46

29.33

46.3

1,068.0

2 DRAWER SIDE LOCKED FOR 72" SERIES • Heavy-duty frame design. • Heavy-duty ball bearing drawer slides. • Mounts on either side.

Part No.

Width (in.)

Depth (in.)

Height (in.)

Shpg. Wt. (lbs.)

TB7202SHD

21.73

29.33

63.15

254.2

www.westwardtools.ca

W040-10.qxp

2/8/10

2:01 PM

Page 40

TOOL STORAGE

75" – 15 DRAWER ROLL CABINET • • • • • •

Double drawer slides on all drawers over 8" deep (3). 6, 6" x 2" Precision Ball Bearing Casters. 14 gauge super heavy-duty under carriage channels. Durable rubber top mat work surface. Chrome-plated handles on both sides of cabinet. 3,600 lb. load rating.

Part No. VRB7515BK

Width (in.)

Depth (in.)

Height (in.)

Shpg. Wt. (lbs.)

751⁄4

241⁄2

391⁄2

455.0

20 DRAWER 42" MONO-COQUE TOOL WALL • Solid one-piece unit provides extra storage and a practical midstation work surface. • Canopy unit provides storage area for larger tools and materials. • Ball bearings slides on all drawers. • Double wall steel construction. • High gloss powder coat scratch resistant paint. • Extruded aluminum drawer handle trim. • Heavy-duty casters: 5" x 2" (56" x 42") 5" x 11⁄4" (27"). • Comes with pre-cut drawer lines. • Gas struts are in the lid for ease in opening and closing the lid.

Part No. VRA4220BK

Width (in.)

Depth (in.)

Height (in.)

Shpg. Wt. (lbs.)

421⁄2

183⁄4

615⁄16

410.0

HEAVY-DUTY 60" MOBILE WORK STATION • Powder coated finish. • Laminated hardwood top.

Part No. WS6003SWM

Width (in.)

Depth (in.)

Height (in.)

Shpg. Wt. (lbs.)

38.4

396.0

www.westwardtools.ca

W041-10.qxp

2/12/10

12:29 PM

Page 41

TOOL STORAGE

HEAVY-DUTY MAINTENANCE CART • Triple channel wall construction. • Three layers of metal reinforce each corner, with our new interlock corner design. • Middle wheel allows unit to "turn on a dime". • Two pair of 120 lb rated ball bearing slides on all drawers. • Patent pending Safe-Lock drawer system prevents drawers from accidentally opening. • Pre-cut drawer liners included. • Galvanized steel work surface.

Part No. SRM4025BK

Width (in.)

Depth (in.)

Height (in.)

Shpg. Wt. (lbs.)

411⁄2

241⁄2

421⁄8

363.0

5-DRAWER WORK STATION • • • •

Wrinkle coating finish. Knock down structure. Laminated hardwood tops. Ball bearing drawer slides.

Width (in.)

Depth (in.)

Height (in.)

Shpg. Wt. (lbs.)

33.0

20.0

33.5

94.7

Width (in.)

Depth (in.)

Height (in.)

Shpg. Wt. (lbs.)

WS3302SW

33.0

20.0

33.5

56.2

WS3301SW

33.0

20.0

33.5

59.5

Part No. WS3305SW

WORK STATIONS • • • •

Wrinkle coating finish. Knock down structure. Laminated hardwood tops. 2, 17.7" x 17.3" shelves.

Part No.

WS3302SW

WS3301SW

4 SHELF WORK STATION • • • • •

Wrinkle coating finish. Knock down structure. Laminated hardwood tops. 2, 17.7" x 17.3" shelves. With lockable cabinet door.

Part No. WS5402SW

Width (in.)

Depth (in.)

Height (in.)

Shpg. Wt. (lbs.)

54.0

20.0

34.0

106.7

www.westwardtools.ca

W042-10.qxp

2/8/10

2:02 PM

Page 42

TOOL STORAGE

5-DRAWER/2 SHELF WORK STATION • • • • •

Wrinkle coating finish. Knock down structure. Laminated hardwood tops. Ball bearing drawer slides. 2, 17.7" x 17.3" shelves.

Part No. WS5405SW

Width (in.)

Depth (in.)

Height (in.)

Shpg. Wt. (lbs.)

54.0

20.0

34.0

134.4

MODULAR WORK STATIONS • Heavy-duty ball bearing slides on drawers. • Adjustable drawer divider. • Modular design allows multiple configuration to suit your needs.

Part No.

Description

Drawer/Tray/ Overall Dimensions (in.) Shelf Size (in.) LxWxH

TB2304RL 4 Door Roller Cabinet with Side Panel 23" 22.8 x 23.6 x 30.5

18.5 x 18.5

Capacity (lbs.)

Total Capacity (kg.)

Shpg. Wt. (lbs.)

110

200.0

95.0

TB2305RL 5 Door Roller Cabinet with Side Panel 23" 22.8 x 23.6 x 30.5

18.5 x 18.5

110

250.0

95.0

WB60PW Work Bench w/Wooden Top 60" x 25"

60.0 x 25.6 x 33.2

60.0 x 25.6

1,000

454.5

60.0

WBL

Work Bench Leg 23" x 30"

23.5 x 4.5 x 30.6

—

22.0

WBPB

Peg Board 60" x 28"

60.1 x 4.7 x 28.3

60.1 x 4.7

—

20.0

WBT

Work Bench Top - Wood 60" x 25"

60.0 x 25.6 x 2.8

60.0 x 25.6

1,000

454.5

70.0

WORK BENCH WITH CABINETS & CHEST • • • •

Dimensions: 59" W x 27.5" D x 59" H. Locking cabinets and drawers to provide security. Sturdy back panel for hanging tools. Quick release design on ball bearing slide can be easily removed for replacement. • Drawer detent prevents unintentional opening of drawers. • Adjustable feet.

Part No.

Description

WB5903SW

Deluxe Work Bench

Overall Dimensions (in.) DxWxH

Shpg. Wt. (lbs.)

27.5 x 59 x 59

200.0

www.westwardtools.ca

W043-10.qxp

2/8/10

2:03 PM

Page 43

TOOL STORAGE LARGE PROFESSIONAL COMPACT POSITION LOCK TOOL BOX • Holds SAE and metric sockets and combination wrenches up to 32 mm, plus hammers, ratchets, screwdrivers, and other miscellaneous tools. • Dimensions: height 201⁄8" (373⁄4" open) x width 30" x depth 19". • Weight: 87 lbs. empty. • Tools not included.

Part No.

Description

Shpg. Wt. (lbs.)

LA400

Large Tool Box

91.0

Tools Not Included

SMALL PROFESSIONAL COMPACT POSITION LOCK TOOL BOX • Holds SAE and metric sockets and combination wrenches up to 25 mm, plus hammers, ratchets, screwdrivers, and other miscellaneous tools. • Dimensions: height 141⁄8" (263⁄4" open) x width 221⁄2" x depth 13". • Weight: 42 lbs. empty. • Tools not included.

Part No.

Description

SM200

Compact Tool Box

Shpg. Wt. (lbs.)

Tools Not Included

45.0

ALUMINUM TOOL BOX • • • • •

Rain resistant. No drawers to jam. Actual weight: 40 lbs. empty. 3.04 cu. ft. Socket and combination wrench peg bars are steel and finished in a tough textured black powder coat paint. • Holds tools in place.

Part No.

Description

ME300AL

Aluminum Tool Box

Shpg. Wt. (lbs.)

Tools Not Included

46.0

INTERMEDIATE PROFESSIONAL TOOL BOX • Holds SAE and metric sockets and combination wrenches up to 32 mm, plus hammers, ratchets, screwdrivers, and other miscellaneous tools. • Dimensions: height 181⁄8" (313⁄4" open) x width 30" x depth 15". • Weight: 64 lbs. empty. • Tools not included. • Holds tools in place. • Compact position lock.

Part No.

Description

ME300

Intermediate Tool Box

www.westwardtools.ca

Shpg. Wt. (lbs.) 67.0

Tools Not Included

W044-10.qxp

2/8/10

2:04 PM

Page 44

TOOL STORAGE ROAD CHEST Weather tight chests are ideal when tools have to be stored outdoors or on trucks. • Heavy gauge metal for heavy-duty use. • Drop front cover has neoprene seal. • Shielded hinges. • Cushion feet pads attached to bottom. • Two points locking system.

Part No.

Width (in.)

Depth (in.)

Height (in.)

Shpg. Wt. (lbs.)

177⁄8

124.0

177⁄8

157.0

B916 B933

INDUSTRIAL GRADE 32" JOB SITE BOX • • • • • • •

Tough powder coat finish. Heavy gauge steel construction. Recessed locking area protects contents. Fully welded seams provide maximum strength. Reinforced overlapping lid provides protection from weather. Heavy duty industrial lid stays prevent accidental closure. Tread plate design.

Part No. Width (in.) Depth (in.) TBJ3219

Height (in.)

Shpg. Wt. (lbs.)

171⁄2

76.0

INDUSTRIAL GRADE 45" JOBSITE TOOL BOXES • • • • • • • • •

Over 12 cubic feet of storage. Tough, powder coated finish. Heavy 16 gauge steel construction. Recessed and concealed locking area protects padlock for ultimate security against drills and bolt cutters. Fully welded seams provide maximum strength. Recessed side handles for easy transportation. Reinforced overlapping lid provides protection from weather and forced entry. Heavy-duty industrial lid stays, prevents accidental closure. Tread plated design.

Part No. Width (in.) Depth (in.) TBJ4524

Height (in.)

Shpg. Wt. (lbs.)

180.0

INDUSTRIAL GRADE 48" JOBSITE BOX • Tough, powder coated finish. • Heavy 16 gauge steel construction. • Recessed and concealed locking area protects padlock for ultimate security against drills and bolt cutters. • Fully welded seams provide maximum strength. • Recessed side handles for easy transportation. • Reinforced overlapping lid provides protection from weather and forced entry. • Heavy-duty industrial lid stays, prevents accidental closure. • Tread plated design.

Part No. Width (in.) Depth (in.) Height (in.) TBJ4824

331⁄2

Shpg. Wt. (lbs.) 191.6

www.westwardtools.ca

W045-10.qxp

2/12/10

12:36 PM

Page 45

CHROME TOOL SOCKETS, KITS & TOOL SETS & STORAGE ACCESSORIES

1/4" Drive Socket Sets. . . . . . . . 46-47 1/4" Sockets & Accessories . . . . 48-50 3/8" Drive Sets . . . . . . . . . . . . . 51-55 3/8" Sockets & Accessories . . . . 55-62 1/2" Drive Socket Sets. . . . . . . . 63-65 1/2" Drive Hex Bit Socket Sets . . . . 66 1/2" Drive Torks Socket Set . . . . . . 66 1/2" Sockets & Accessories . . . . 67-73 3/4" Drive Socket Sets. . . . . . . . 74-75 3/4" Sockets & Accessories . . . . 75-77 1" Drive Socket Sets . . . . . . . . . . . 78 1" Sockets & Accessories . . . . . 78-80

W046-10.qxp

2/8/10

2:06 PM

Page 46

1/4" DRIVE CHROME SOCKETS 52 PIECE 1⁄4" DRIVE SAE & METRIC PROFESSIONAL SERIES SOCKET SET • SAE sockets – 6 point: 3⁄16", 7⁄32", 1⁄4", 9⁄32", 5⁄16", 11⁄32", 3⁄8", 7⁄16", 1⁄2". • Metric sockets – 6 point: 4, 5, 6, 7, 8, 9, 10, 11, 12 mm. • Ratchet, 2" extension, 4" extension, universal joint, 1⁄4" F hex - 1⁄4" F coupler, spinner handle, 1⁄4" hex extension. • Screwdriver bits: Phillips – #1, 2, 3; Torks – 10, 15, 20, 25, 30; square – #1, 2; slotted – 4 mm, 5.5 mm, 6.5 mm; hex – 1⁄16" - 1⁄4" and 2.5 - 6 mm. • Includes high impact case.

Part No.

Description

Shpg. Wt. (lbs.)

SKC1452

52 Piece Socket Set

4.0

42 PIECE 1⁄4" DRIVE SAE & METRIC PROFESSIONAL SERIES SOCKET SET • • • • • •

SAE sockets – 6 point: 3⁄16", 7⁄32", 1⁄4", 9⁄32", 5⁄16", 11⁄32", 3⁄8", 7⁄16", 1⁄2". Deep SAE sockets – 6 point: 3⁄16", 7⁄32", 1⁄4", 9⁄32", 5⁄16", 11⁄32", 3⁄8", 7⁄16", 1⁄2". Metric sockets – 6 point: 4, 5, 6, 7, 8, 9, 10, 11, 12 mm. Deep metric sockets – 6 point: 4, 5, 6, 7, 8, 9, 10, 11, 12 mm. Ratchet, 2" extension, 4" extension, universal joint, spinner handle. Includes high impact case.

Part No.

Description

SKC1442

42 Piece Socket Set

Shpg. Wt. (lbs.) 4.0

24 PIECE 1⁄4" DRIVE SAE & METRIC PROFESSIONAL SERIES SOCKET SET • • • •

SAE sockets – 6 point: 3⁄16", 7⁄32", 1⁄4", 9⁄32", 5⁄16", 11⁄32", 3⁄8", 7⁄16", 1⁄2". Metric sockets – 6 point: 4, 5, 6, 7, 8, 9, 10, 11, 12 mm. Ratchet, 2" extension, 4" extension, universal joint, spinner handle. Includes high impact case.

Part No.

Description

SKC1424

24 Piece Socket Set

Shpg. Wt. (lbs.) 2.5

20 PIECE 1⁄4" DRIVE SAE & METRIC SOCKET SET • • • •

SAE sockets – 6 point: 3⁄16", 7⁄32", 1⁄4", 9⁄32", 5⁄16", 11⁄32", 3⁄8", 7⁄16", 1⁄2". Metric sockets – 6 point: 4, 5, 6, 7, 8, 9, 10, 11, 12 mm. Quick-release ratchet. Includes high impact case.

Part No.

Description

Shpg. Wt. (lbs.)

SKC1420

20 Piece Socket Set

2.0

9 PIECE 1⁄4" DRIVE METRIC SOCKET SET Metric sockets – 6 point: 4, 5, 6, 7, 8, 9, 10, 11, 12 mm.

Part No.

Description

Shpg. Wt. (lbs.)

MSK1409

9 Piece Socket Set

0.3

www.westwardtools.ca

W047-10.qxp

2/8/10

2:08 PM

Page 47

1/4" DRIVE CHROME SOCKETS 9 PIECE 1⁄4" DRIVE 12 POINT SAE SOCKET SET SAE sockets – 3⁄16", 7⁄32", 1⁄4", 9⁄32", 5⁄16",

Part No.

Description

SK14209

9 Piece Set

11⁄32", 3⁄8", 7⁄16", 1⁄2".

Shpg. Wt. (lbs.) 0.3

9 PIECE 1⁄4" DRIVE DEEP SAE SOCKET SET • SAE sockets – 6 point: 3⁄16", 7⁄32", 1⁄4", 9⁄32", 5⁄16", • Includes metal tray.

11⁄32", 3⁄8", 7⁄16", 1⁄2".

Part No.

Description

Shpg. Wt. (lbs.)

DSK1409

9 Piece Socket Set

1.1

9 PIECE 1⁄4" DRIVE DEEP METRIC SOCKET SET • Deep metric sockets – 6 point: 4, 5, 6, 7, 8, 9, 10, 11, 12 mm. • Includes metal tray.

Part No.

Description

DMK1409

9 Piece Socket Set

Shpg. Wt. (lbs.) 1.1

11 PIECE 1⁄4" & 3⁄8" DRIVE TORKS BIT SOCKET SET • 7 Piece 1⁄4" drive: T10, T15, T20, T25, T27, T30, T40. • 4 Piece 3⁄8" drive: T45, T50, T55, T60. • Includes socket rail.

Part No.

Description

SKT11

11 Piece Torks Set

Shpg. Wt. (lbs.) 1.0

8 PIECE 1⁄4" & 3⁄8" TORKS SOCKET SET • 3 Piece 1⁄4" drive: E6, E7, E8. • 5 Piece 3⁄8" drive: E10, E12, E14, E16, E18. • Includes socket rail.

Part No.

Description

SKT8

8 Piece Torks Set

Shpg. Wt. (lbs.) 0.8

20 PIECE 1⁄4" & 3⁄8" DRIVE TORKS SOCKET SET • • • • •

7 Piece 1⁄4" drive: T10, T15, T20, T25, T27, T30, T40. 4 Piece 3⁄8" drive: T45, T50, T55, T60. 3 Piece inverted 1⁄4" drive: E6, E7, E8. 5 Piece inverted 3⁄8" drive: E10, E12, E14, E16, E18. Includes high impact case.

Part No.

Description

SKT20

20 Piece Torks Set

Shpg. Wt. (lbs.) 3.5

12 PIECE 1⁄4" & 3⁄8" DRIVE TAMPER RESISTANT TORKS BIT SOCKET SET • 6 Piece 1⁄4" drive: T10, T15, T20, T25, T27, T30. • 5 Piece 3⁄8" drive: T40, T45, T50, T55, T60. • Includes high impact case.

Part No.

Description

SKT12T

12 Piece Torks Set

www.westwardtools.ca

Shpg. Wt. (lbs.) 2.0

W048-10.qxp

2/8/10

2:09 PM

Page 48

1/4" DRIVE CHROME SOCKETS 1⁄4"

DRIVE RATCHET

Part No.

Length (in.)

Head Width (in.)

5.7

1.0

SA14A SA14ARK 1⁄4"

Head Thickness (in.) Shpg. Wt. (lbs.) 0.5

Repair Kit

0.1

DRIVE FLEX HANDLE

Part No.

Length (in.)

SA1401

6.0

Shpg. Wt. (lbs.) 0.3

SA1401RKT Repair Kit 1⁄4"

0.1

DRIVE SLIDING “T” HANDLE

Part No.

Length (in.)

Head Width (in.)

Shpg. Wt. (lbs.)

SA1403

4.5

0.5

0.1

1⁄4"

DRIVE SPINNER HANDLE

Part No.

Length (in.)

Shaft Length (in.)

Width (in.)

Shpg. Wt. (lbs.)

SDH1412

5.9

2.0

0.8

0.3

1⁄4"

DRIVE EXTENSIONS

Part No.

Length (in.)

Drive End Thickness (in.) Shpg. Wt. (lbs.)

SA142

2.0

0.5

0.1

SA144

4.0

0.5

0.1

SA146

6.0

0.5

0.1

1⁄4"

DRIVE FLEXIBLE EXTENSION

Part No.

Length (in.)

Head Width (in.)

Shpg. Wt. (lbs.)

SA146F

6.0

0.5

0.2

Length (in.)

Shpg. Wt. (lbs.)

1.0

0.1

1⁄4"

DRIVE ADAPTER

Part No.

Description

SA1438

1⁄4"

0.4

F x 3⁄8" M

DRIVE UNIVERSAL JOINT

Part No.

Length (in.)

Width (in.)

Shpg. Wt. (lbs.)

SA1402

1.4

0.6

0.1

www.westwardtools.ca

W049-10.qxp

2/8/10

2:10 PM

Page 49

1/4" DRIVE CHROME SOCKETS Part No.

Size (in.)

Length Max. Outside (in.) Diameter (in.)

Bolt Clearance Shpg. Wt. (in.) (lbs.)

SS1459

5⁄32

1.0

0.47

0.30

0.1

SS1460

3⁄16

1.0

0.47

0.30

0.1

SS1461

7⁄32

1.0

0.47

0.31

0.1

SS1462

1⁄4

1.0

0.47

0.31

0.1

SS1463

9⁄32

1.0

0.47

0.31

0.1

SS1464

5⁄16

1.0

0.47

0.31

0.1

SS1465

11⁄32

1.0

0.51

0.31

0.1

SS146A

3⁄8

1.0

0.57

0.35

0.1

SS146B

7⁄16

1.0

0.63

0.45

0.1

SS146C

1⁄2

1.0

0.69

0.45

0.1

Part No.

Size (in.)

Length (in.)

Shpg. Wt. (lbs.)

SS1420

3⁄16

1.0

0.1

SS1421

7⁄32

1.0

0.1

SS1422

1⁄4

1.0

0.1

SS1423

9⁄32

1.0

0.1

SS1424

5⁄16

1.0

0.1

SS1425

11⁄32

1.0

0.1

SS142A

3⁄8

1.0

0.1

SS142B

7⁄16

1.0

0.1

SS142C

1⁄2

1.0

0.1

Part No.

Size (in.)

Length Max. Outside (in.) Diameter (in.)

1⁄4"

DRIVE SAE SHALLOW SOCKETS – 6 POINT

1⁄4"

DRIVE SAE SHALLOW SOCKETS – 12 POINT

Bolt Clearance Shpg. Wt. (in.) (lbs.)

SS1482

1⁄4

0.98

0.47

0.30

0.1

SS1484

5⁄16

0.98

0.55

0.31

0.1

SS1485

11⁄32

0.98

0.55

0.31

0.1

SS148A

3⁄8

0.98

0.63

0.35

0.1

Part No.

Size (mm)

MS1404

24.8

11.90

MS1445

4.5

24.8

11.90

7.50

0.1

MS1405

24.8

11.90

7.50

0.1

MS1455

5.5

24.8

11.90

8.00

0.1

MS1406

24.8

11.90

8.00

0.1

MS1407

24.8

11.90

8.00

0.1

MS1408

24.8

11.90

8.00

0.1

1⁄4" DRIVE SAE SHALLOW SOCKETS – 8 POINT

Length Max. Outside Bolt Clearance Shpg. Wt. (mm) Diameter (mm) (mm) (lbs.) 6.50

0.1

MS1409

24.8

13.40

8.00

0.1

MS1410

24.8

14.50

9.00

0.1

MS1411

24.8

15.90

11.50

0.1

MS1412

24.8

16.90

11.50

0.1

MS1413

24.8

18.00

11.50

0.1

www.westwardtools.ca

1⁄4"

DRIVE METRIC SHALLOW SOCKETS – 6 POINT

W050-10.qxp

2/8/10

2:11 PM

Page 50

1/4" DRIVE CHROME SOCKETS Size (in.)

Length (in.)

Max. Outside Diameter (in.)

Bolt Clearance (in.)

Shpg. Wt. (lbs.)

DS1460

3⁄16

1.97

0.47

0.30

0.1

DS1461

7⁄32

1.97

0.47

0.37

0.1

DS1462

1⁄4

1.97

0.47

0.37

0.1

DS1463

9⁄32

1.97

0.47

0.61

0.1

DS1464

5⁄16

1.97

0.47

0.61

0.1

DS1465

11⁄32

1.97

0.51

0.61

0.1

DS146A

3⁄8

1.97

0.57

0.61

0.1

DS146B

7⁄16

1.97

0.63

0.77

0.1

DS146C

1⁄2

1.97

0.69

0.77

0.2

Part No.

1⁄4"

DRIVE SAE DEEP SOCKETS – 6 POINT

Part No.

1⁄4"

DRIVE METRIC DEEP SOCKETS – 6 POINT

1⁄4"

DRIVE TORKS BITS

1⁄4"

DRIVE TAMPER RESISTANT TORKS SOCKETS

1⁄4"

DRIVE INVERTED TORKS BITS

Size Length (mm) (mm)

Max. Outside Bolt Clearance Diameter (mm) (mm)

Shpg. Wt. (lbs.)

DMS1404

50.0

11.90

6.50

0.1

DMS1405

50.0

11.90

8.50

0.1

DMS1406

50.0

11.90

9.50

0.1

DMS1407

50.0

11.90

15.50

0.1

DMS1408

50.0

11.90

15.50

0.1

DMS1409

50.0

13.40

15.50

0.1

DMS1410

50.0

14.50

15.50

0.1

DMS1411

50.0

15.90

19.50

0.1

DMS1412

50.0

16.90

19.50

0.2

Part No.

Size

Length (in.)

Shpg. Wt. (lbs.)

TS1410

T10

1.25

0.1

TS1415

T15

1.25

0.1

TS1420

T20

1.25

0.1

TS1425

T25

1.25

0.1

TS1427

T27

1.25

0.1

TS1430

T30

1.25

0.1

TS1440

T40

1.25

0.1

Part No.

Size

Length (in.)

Shpg. Wt. (lbs.)

TS1410T

T10

1.25

0.1

TS1415T

T15

1.25

0.1

TS1420T

T20

1.25

0.1

TS1425T

T25

1.25

0.1

TS1427T

T27

1.25

0.1

TS1430T

T30

1.25

0.1

Part No.

Size

Length (in.)

Shpg. Wt. (lbs.)

TSI146

1.0

0.1

TSI147

1.0

0.1

TSI148

1.0

0.1

www.westwardtools.ca

W051-10.qxp

2/8/10

2:12 PM

Page 51

3/8" DRIVE CHROME SOCKETS 57 PIECE 3⁄8" DRIVE PROFESSIONAL SERIES SOCKET SET • • • • •

Standard SAE sockets – 6 point: 1⁄4", 5⁄16", 3⁄8", 7⁄16", 1⁄2", 9⁄16", 5⁄8", 11⁄16", 3⁄4", 13⁄16", 7⁄8". Deep SAE – 6 point: 5⁄16",3⁄8", 7⁄16", 1⁄2", 9⁄16", 5⁄8", 11⁄16", 3⁄4", 13⁄16", 7⁄8". Standard metric – 6 point: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22 mm. Deep metric – 6 point: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm. Drive quick-release ratchet; universal joint; 3" extension; 6" extension; 10" extension; 5⁄8" and 13⁄16" spark plug socket. • Includes high impact case.

Part No.

Description

SK3857

57 Piece Socket Set

Shpg. Wt. (lbs.) 11.0

55 PIECE 3⁄8" DRIVE PROFESSIONAL SERIES SOCKET SET • Standard SAE sockets – 6 point: 1⁄4", 5⁄16", 3⁄8", 7⁄16", 1⁄2", 9⁄16", 5⁄8", 11⁄16", 3⁄4", 13⁄16", 7⁄8". • Standard metric sockets – 6 point: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22 mm. • Bit sockets: #1, #2, #3 Phillips; 5.5, 6.5 mm slotted; T15, T20, T25, T27, T30, T40, T50 Torks; 3, 4, 5, 6, 7, 8 mm hex; #1, #2 square. • Quick-release ratchet; universal joint; 3" extension; 6" extension; 10" extension; 5⁄8" and 13⁄16" spark plug socket. • Includes high impact case.

Part No.

Description

SKC3855

55 Piece Socket Set

Shpg. Wt. (lbs.) 9.0

20 PIECE 3⁄8" DRIVE PROFESSIONAL SERIES SAE SOCKET SET • • • •

Standard SAE sockets – 6 point: 3⁄8", 7⁄16", 1⁄2", 9⁄16", 5⁄8", 11⁄16", 3⁄4". Deep SAE sockets – 6 point: 3⁄8", 7⁄16", 1⁄2", 9⁄16", 5⁄8", 11⁄16", 3⁄4", 13⁄16". Quick-release ratchet; flex handle; universal joint; 3" extension. Includes high impact case.

Part No.

Description

SK3820

20 Piece Socket Set

Shpg. Wt. (lbs.) 6.0

11 PIECE 3⁄8" DRIVE SAE STARTER SOCKET SET • Standard SAE sockets – 6 point: 5⁄16", 3⁄8", 7⁄16", 1⁄2", 9⁄16", 5⁄8", • Quick-release ratchet; 6" extension. • Includes high impact case.

Part No.

Description

SK3811

11 Piece Socket Set

www.westwardtools.ca

11⁄16", 3⁄4".

Shpg. Wt. (lbs.) 4.0

W052-10.qxp

2/8/10

2:14 PM

Page 52

3/8" DRIVE CHROME SOCKETS

27 PIECE 3⁄8" DRIVE METRIC PROFESSIONAL SERIES SOCKET SET • • • •

Standard metric sockets – 6 point: 8 , 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm. Deep metric sockets – 6 point: 8, 9, 10, 11, 12, 13, 14, 15, 17, 19 mm. Quick release ratchet; 3" extension; 6" extension; universal joint. Includes high impact case.

Part No.

Description

Shpg. Wt. (lbs.)

MSK3827

27 Piece Set

8.0

17 PIECE 3⁄8" DRIVE METRIC STARTER SOCKET SET • Standard metric sockets – 6 point: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm. • Quick-release ratchet; 3" extension; flex handle; universal joint. • Includes high impact case.

Part No.

Description

MSK3817

17 Piece Socket Set

Shpg. Wt. (lbs.) 7.0

9 PIECE 3⁄8" DRIVE SAE 6 POINT SOCKET SET • Standard SAE sockets – 6 point: 3⁄8", 7⁄16", 1⁄2", 9⁄16", 5⁄8", • Includes metal tray.

Part No.

Description

SK38609

9 Piece Socket Set

11⁄16", 3⁄4", 13⁄16".

Shpg. Wt. (lbs.) 1.0

9 PIECE 3⁄8" DRIVE SAE 12 POINT SOCKET SET • Standard SAE sockets – 12 point: 5⁄16", 3⁄8", 7⁄16", 1⁄2", 9⁄16", 5⁄8", • Includes socket rail.

Part No.

Description

SK38209

9 Piece Socket Set

11⁄16", 3⁄4".

Shpg. Wt. (lbs.) 1.0

www.westwardtools.ca

W053-10.qxp

2/8/10

2:15 PM

Page 53

3/8" DRIVE CHROME SOCKETS 14 PIECE 3⁄8" DRIVE METRIC SOCKET SET • Standard metric sockets – 6 point: 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm. • Includes metal tray.

Part No.

Description

MSK3814

14 Piece Socket Set

Shpg. Wt. (lbs.) 1.5

10 PIECE 3⁄8" DRIVE DEEP SAE SOCKET SET • Deep sockets – 6 point: 3⁄8", 7⁄16", 1⁄2", 9⁄16", 5⁄8", • Includes metal tray.

Part No.

Description

DSK3810

10 Piece Socket Set

11⁄16", 3⁄4", 13⁄16", 7⁄8".

Shpg. Wt. (lbs.) 2.2

14 PIECE 3⁄8" DRIVE DEEP METRIC SOCKET SET • Deep metric sockets – 6 point: 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm. • Includes metal tray.

Part No.

Description

DMK3814

14 Piece Socket Set

Shpg. Wt. (lbs.) 4.0

8 PIECE 3⁄8" DRIVE SAE UNIVERSAL JOINT SOCKET SET • Universal joint sockets – 6 point: 3⁄8", 7⁄16", 1⁄2", 9⁄16", 5⁄8", • Includes high impact case.

Part No.

Description

SKU38608

8 Piece Socket Set

11⁄16", 3⁄4".

Shpg. Wt. (lbs.) 2.6

11 PIECE 3⁄8" DRIVE METRIC UNIVERSAL JOINT SOCKET SET • Universal joint sockets – 6 point: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm. • Includes high impact case.

Part No.

Description

MSKU38611

11 Piece Socket Set

www.westwardtools.ca

Shpg. Wt. (lbs.) 3.5

W054-10.qxp

2/8/10

2:16 PM

Page 54

3/8" DRIVE CHROME SOCKETS 9 PIECE 3⁄8" DRIVE SAE CROWFOOT WRENCH SET • Sizes: 3⁄8", 7⁄16", 1⁄2", 9⁄16", 5⁄8", • Includes storage rail.

11⁄16", 3⁄4", 7⁄8".

Part No.

Description

CFK9

9 Piece Crowfoot Set

Shpg. Wt. (lbs.) 2.0

9 PIECE 3⁄8" DRIVE METRIC CROWFOOT WRENCH SET • Sizes: 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm. • Includes socket rail.

Part No.

Description

CFK9M

9 Piece Crowfoot Set

Shpg. Wt. (lbs.) 2.0

8 PIECE 3⁄8" DRIVE SAE HEX BIT SOCKET SET • Sizes 1⁄8", 5⁄32", 3⁄16", 7⁄32", 1⁄4", 5⁄16" and 3⁄8". • Includes high impact case.

Part No.

Description

HSK3808

8 Piece Hex Bit Socket Set

Shpg. Wt. (lbs.) 2.0

8 PIECE 3⁄8" DRIVE SAE EXTRA LONG HEX BIT SOCKET SET • Sizes 1⁄8", 5⁄32", 3⁄16", 7⁄32", 1⁄4", 5⁄16" and 3⁄8". • Includes high impact case.

Part No.

Description

HSK388L

8 Piece Hex Bit Socket Set

Shpg. Wt. (lbs.) 2.0

www.westwardtools.ca

W055-10.qxp

2/8/10

2:17 PM

Page 55

3/8" DRIVE CHROME SOCKETS

8 PIECE 3⁄8" DRIVE METRIC HEX BIT SOCKET SET • Sizes 3 mm, 4 mm, 5 mm, 6 mm, 7 mm, 8 mm and 10 mm. • Includes high impact case.

Part No.

Description

MHSK3808

8 Piece Metric Set

Shpg. Wt. (lbs.) 2.0

10 PIECE 3⁄8" DRIVE METRIC EXTRA LONG HEX BIT SOCKET SET • Sizes 3 mm, 4 mm, 5 mm, 6 mm, 7 mm, 8 mm, 9 mm, 10 mm and 12 mm. • Includes high impact case.

Part No.

Description

MHSK3810L

10 Piece Hex Bit Socket Set

3⁄8"

SA38A SA38ARK

Length (in.)

Head Width (in.)

1.3

Head Thickness (in.) Shpg. Wt. (lbs.) 0.56

Repair Kit

1.5 0.2

DRIVE FLEX RATCHET

Part No.

Length (in.)

Head Width (in.)

SA38AF

11.5

1.3

Head Thickness (in.) Shpg. Wt. (lbs.) 0.56

SA38AFRK Repair Kit

3⁄8"

2.4

DRIVE QUICK RELEASE RATCHET

Part No.

3⁄8"

Shpg. Wt. (lbs.)

2.0 0.2

DRIVE FLEX BAR

Part No.

Length (in.)

Shpg. Wt. (lbs.)

SA3801

9.9

1.0

SA3801RKT

Repair Kit

www.westwardtools.ca

0.1

W056-10.qxp

2/8/10

2:19 PM

Page 56

3/8" DRIVE CHROME SOCKETS 3⁄8"

DRIVE SPINNER HANDLE

Part No.

Length (in.)

Shpg. Wt. (lbs.)

SDH3812

0.5

Part No.

Length (in.)

Shpg. Wt. (lbs.)

SA3803

0.9

Part No.

Length (in.)

Shpg. Wt. (lbs.)

SA3807

1.3

3⁄8"

DRIVE T-HANDLE

DRIVE SPEEDER HANDLE

DRIVE EXTENSION SET

• Includes: 13⁄4", 3", 6", 10" and 18" extensions. • With knurled grip on size 3" and above.

Part No.

Description

SAK385

5 Piece Extension Set

3⁄8"

2.2

DRIVE EXTENSIONS

Part No.

Shpg. Wt. (lbs.)

Length (in.)

Shpg. Wt. (lbs.)

SA382

13⁄4

0.1

SA383

0.2

SA386

0.4

SA3810

0.7

SA3818

1.0

SA3824

1.5

SA3830

2.1

www.westwardtools.ca

W057-10.qxp

2/8/10

2:20 PM

Page 57

3/8" DRIVE CHROME SOCKETS 3⁄8"

DRIVE WOBBLE EXTENSION SET

• Includes 11⁄4", 3", 6" and 9" extensions. • With knurled grips on sizes 3" and over.

Part No.

Description

SAK384W

4 Piece Set

3⁄8"

Shpg. Wt. (lbs.) 1.6

DRIVE WOBBLE EXTENSIONS

Part No.

Length (in.)

Shpg. Wt. (lbs.)

SA382W

11⁄4

0.1

SA383W

0.2

SA386W

0.4

SA389W

0.7

3⁄8"

DRIVE LOCKING EXTENSION SET

• Featuring a quick push button release. • Sockets are locked to the extension until you release them. • 3", 6", and 10" lengths.

Part No.

Description

SAK383

3 Piece Set

3⁄8"

Shpg. Wt. (lbs.) 1.5

DRIVE LOCKING EXTENSIONS

Part No.

Length (in.)

Shpg. Wt. (lbs.)

SAL383

0.2

SAL386

0.4

SAL3810

0.7

3⁄8"

DRIVE UNIVERSAL JOINT

Part No.

Length (in.)

Width (in.)

Shpg. Wt. (lbs.)

SA3802

0.75

0.2

Length (in.)

Shpg. Wt. (lbs.)

3⁄8"

DRIVE ADAPTERS

Part No.

Description

SA3814

3⁄8"

1.0

0.1

SA3812

3⁄8"

F, 1⁄2" M

1.3

0.1

1⁄4"

www.westwardtools.ca

W058-10.qxp

2/8/10

2:21 PM

Page 58

3/8" DRIVE CHROME SOCKETS 3⁄8"

DRIVE STANDARD LENGTH SOCKETS 6 – POINT Size (in.)

Length (in.)

SS3864

5⁄16

1.00

0.67

0.31

0.1

SS386A

3⁄8

1.00

0.67

0.31

0.1

SS386B

7⁄16

1.00

0.67

0.31

0.1

SS386C

1⁄2

1.00

0.72

0.33

0.1

SS386D

9⁄16

1.06

0.80

0.51

0.1

SS386F

5⁄8

1.06

0.87

0.51

0.1

SS386H

11⁄16

1.06

0.94

0.51

0.2

SS386I

3⁄4

1.14

1.01

0.55

0.2

SS386K

13⁄16

1.14

1.10

0.55

0.2

SS386L

7⁄8

1.22

1.18

0.63

0.3

Part No.

3⁄8"

DRIVE STANDARD LENGTH SOCKETS – 12 POINT Size (in.)

Length (in.)

SS3824

5⁄16

1.00

0.67

0.31

0.1

SS382A

3⁄8

1.00

0.67

0.31

0.1

SS382B

7⁄16

1.00

0.67

0.31

0.1

SS382C

1⁄2

1.00

0.72

0.33

0.1

SS382D

9⁄16

1.06

0.80

0.51

0.1

SS382F

5⁄8

1.06

0.87

0.51

0.1

SS382H

11⁄16

1.06

0.94

0.51

0.1

3⁄4

1.14

1.01

0.55

0.1

Part No.

SS382I 3⁄8"

Max. Outside Bolt Clearance Shpg. Wt. Diameter (in.) (in.) (lbs.)

DRIVE STANDARD LENGTH METRIC SOCKETS – 6 POINT

Part No. MS38606 MS38607 MS38608 MS38609 MS38610 MS38611 MS38612 MS38613 MS38614 MS38615 MS38616 MS38617 MS38618 MS38619 MS38620 MS38621 MS38622 MS38623 MS38624

Max. Outside Bolt Clearance Shpg. Wt. Diameter (in.) (in.) (lbs.)

Size Length Max. Outside (mm) (mm) Diameter (mm)

Bolt Clearance Shpg. Wt. (mm) (lbs.)

25.5

17.00

7.00

25.5

17.00

7.00

0.1 0.1

25.5

17.00

8.00

0.1

25.5

17.00

8.00

0.1

25.5

17.00

8.00

0.1

25.5

17.00

8.00

0.1

25.5

17.00

8.80

0.1

25.5

18.40

8.50

0.1

27.0

19.60

13.00

0.1

27.0

20.90

13.00

0.1

27.0

22.00

13.00

0.1

27.0

23.40

13.00

0.2

27.0

24.50

13.00

0.2

29.0

25.60

14.00

0.2

29.0

26.80

14.00

0.2

31.0

27.90

14.00

0.2

31.0

29.60

16.00

0.3

31.0

31.20

16.00

0.3

31.0

32.00

16.00

0.3

www.westwardtools.ca

W059-10.qxp

2/8/10

2:22 PM

Page 59

3/8" DRIVE CHROME SOCKETS 3⁄8"

DRIVE STANDARD LENGTH METRIC SOCKETS – 12 POINT

Part No.

Size Length Max. Outside Bolt Clearance Shpg. Wt. (mm) (mm) Diameter (mm) (mm) (lbs.)

MS38209

25.5

17.0

8.0

0.1

MS38210

25.5

17.0

8.0

0.1

MS38211

25.5

17.0

8.0

0.1

MS38212

25.5

17.0

8.8

0.1

MS38213

25.5

18.4

8.5

0.1

MS38214

27.0

19.6

13.0

0.1

MS38215

27.0

20.9

13.0

0.1

MS38216

27.0

22.0

13.0

0.1

MS38217

27.0

23.4

13.0

0.2

MS38218

27.0

24.5

13.0

0.2

MS38219

29.0

25.6

14.0

0.2

3⁄8"

DRIVE DEEP SOCKETS – 6 POINT

Part No. DS3864 DS386A DS386B DS386C DS386D DS386F DS386H DS386I DS386K DS386L 3⁄8"

Size (in.)

Length (in.)

Max. Outside Diameter (in.)

Bolt Clearance Shpg. Wt. (in.) (lbs.)

5⁄16

1.00

0.67

0.98

0.2

3⁄8

2.52

0.67

0.98

0.1

7⁄16

2.52

0.67

0.98

0.1

1⁄2

2.52

0.72

0.98

0.1

9⁄16

2.52

0.80

0.98

0.1

5⁄8

2.52

0.87

0.98

0.1

11⁄16

2.52

0.94

0.98

0.1

3⁄4

2.52

1.01

0.98

0.1

13⁄16

2.52

1.10

0.98

0.2

7⁄8

2.52

1.18

0.98

0.2

DRIVE DEEP METRIC SOCKETS – 6 POINT

Size Length Max. Outside Part No. (mm) (mm) Diameter (mm) DMS38606 6 64.0 17.00 DMS38607 7 64.0 17.00 DMS38608 8 64.0 17.00 DMS38609 9 64.0 17.00 DMS38610 10 64.0 17.00 DMS38611 11 64.0 17.00 DMS38612 12 64.0 17.00 DMS38613 13 64.0 18.40 DMS38614 14 64.0 19.60 DMS38615 15 64.0 20.90 DMS38616 16 64.0 22.00 DMS38617 17 64.0 23.40 DMS38618 18 64.0 24.50 DMS38619 19 64.0 25.60

www.westwardtools.ca

Bolt Clearance Shpg. Wt. (mm) (lbs.) 10.00

0.1

12.00

0.1

14.00

0.1

15.00

0.1

25.00

0.1

25.00

0.1

25.00

0.1

25.00

0.2

25.00

0.2

25.00

0.2

25.00

0.2

25.00

0.3

25.00

0.3

25.00

0.3

W060-10.qxp

3⁄8"

2/8/10

2:23 PM

Page 60

DRIVE CHROME SOCKETS 3⁄8"

DRIVE SAE UNIVERSAL JOINT SOCKETS

Part No.

Description

Shpg. Wt. (lbs.)

SSU386A

3⁄8

6 Point

0.1

SSU386B

7⁄16

6 Point

0.1

SSU386C

1⁄2

6 Point

0.1

SSU386D

9⁄16

6 Point

0.2

SSU386F

5⁄8

6 Point

0.2

SSU386H

11⁄16

6 Point

0.2

3⁄4

6 Point

0.2

SSU386I 3⁄8"

DRIVE METRIC UNIVERSAL JOINT SOCKETS

Part No.

Size (mm)

Description

Shpg. Wt. (lbs.)

MSU38610

6 Point

0.1

MSU38611

6 Point

0.1

MSU38612

6 Point

0.1

MSU38613

6 Point

0.2

MSU38614

6 Point

0.2

MSU38615

6 Point

0.2

MSU38616

6 Point

0.2

MSU38617

6 Point

0.2

MSU38618

6 Point

0.2

MSU38619

6 Point

0.2

3⁄8"

DRIVE SHORT HEX BIT SOCKETS

Part No.

Size (in.)

Length (in.)

Shpg. Wt. (lbs.)

HBS38-4

1⁄8

1.7

0.1

HBS38-5

5⁄32

1.7

0.1

HBS38-6

3⁄16

1.7

0.1

HBS38-7

7⁄32

1.7

0.1

HBS38-8

1⁄4

1.7

0.1

HBS38-10

5⁄16

1.9

0.1

HBS38-12

3⁄8

1.9

0.1

3⁄8"

DRIVE LONG HEX BIT SOCKETS

Part No.

Size (in.)

Length (in.)

Shpg. Wt. (lbs.)

HBS38-4L

1⁄8

1.90

0.1

HBS38-5L

5⁄32

3.15

0.1

HBS38-6L

3⁄16

3.15

0.1

HBS38-7L

7⁄32

3.15

0.1

HBS38-8L

1⁄4

3.15

0.1

HBS38-10L

5⁄16

3.15

0.1

HBS38-12L

3⁄8

3.15

0.1

www.westwardtools.ca

W061-10.qxp

2/8/10

2:24 PM

Page 61

3⁄8" 3⁄8"

DRIVE METRIC HEX BIT SOCKETS

Part No.

Size (mm)

Length (mm)

Shpg. Wt. (lbs.)

MHBS38-3

4.3

0.1

MHBS38-4

4.3

0.1

MHBS38-5

4.3

0.1

MHBS38-6

4.3

0.1

MHBS38-7

4.3

0.1

MHBS38-8

4.6

0.1

MHBS38-10

4.6

0.1

3⁄8"

DRIVE LONG METRIC HEX BIT SOCKETS

Part No.

Size (mm)

Length (mm)

Shpg. Wt. (lbs.)

MHBS38-3L

0.1

MHBS38-4L

0.1

MHBS38-5L

0.1

MHBS38-6L

0.1

MHBS38-7L

0.1

MHBS38-8L

0.1

MHBS38-9L

0.1

MHBS38-10L

0.2

MHBS38-12L

0.2

3⁄8"

DRIVE TORKS BIT SOCKETS

Part No.

Size

Length (in.)

Shpg. Wt. (lbs.)

TS3825

T25

1.95

0.1

TS3830

T30

1.95

0.1

TS3840

T40

1.95

0.1

TS3845

T45

1.95

0.1

TS3847

T47

1.95

0.1

TS3850

T50

1.95

0.1

TS3855

T55

1.95

0.1

TS3860

T60

1.95

0.2

3⁄8"

DRIVE CHROME SOCKETS

DRIVE TAMPER-RESISTANT TORKS BIT SOCKETS

Part No.

Size

Length (in.)

Shpg. Wt. (lbs.)

TS3840T

T40

1.95

0.1

TS3845T

T45

1.95

0.1

TS3850T

T50

1.95

0.1

TS3855T

T55

1.95

0.1

TS3860T

T60

1.95

0.2

www.westwardtools.ca

W062-10.qxp

3⁄8"

2/8/10

2:26 PM

Page 62

DRIVE CHROME SOCKETS 3⁄8"

DRIVE INVERTED TORKS BIT SOCKETS

Part No.

Size

Length (in.)

Shpg. Wt. (lbs.)

TSI3810

E10

1.2

0.1

TSI3812

E12

1.2

0.1

TSI3814

E14

1.2

0.1

TSI3816

E16

1.2

0.1

TSI3818

E18

1.2

0.1

3⁄8"

DRIVE SPARK PLUG SOCKETS

Part No.

Size

Length (in.)

Shpg. Wt. (lbs.)

SP386F

5⁄8"

2.40

0.2

SP386K

13⁄16"

2.56

0.3

21 mm

2.56

0.3

MSP3821

3⁄8"

DRIVE METRIC OPEN END CROWSFOOT WRENCHES

Part No.

Shpg. Wt. (lbs.)

CF10M

0.1

CF11M

0.1

CF12M

0.2

CF13M

0.2

CF14M

0.2

CF15M

0.2

CF16M

0.3

CF17M

0.3

3⁄8"

DRIVE SAE OPEN END CROWSFOOT WRENCHES

Part No.

Size (mm)

Size (in.)

Shpg. Wt. (lbs.)

CF200

3⁄8

0.1

CF201

7⁄16

0.2

CF202

1⁄2

0.2

CF203

9⁄16

0.2

CF204

5⁄8

0.2

CF205

11⁄16

0.3

CF206

3⁄4

0.3

CF208

7⁄8

0.3

www.westwardtools.ca

W063-10.qxp

2/8/10

2:31 PM

Page 63

1⁄2"

DRIVE CHROME SOCKETS

33 PIECE 1⁄2" DRIVE 6 POINT PROFESSIONAL SERIES SAE SOCKET SET • Standard 6 point sockets: 7⁄16", 1⁄2", 9⁄16", 5⁄8", 11⁄16", 3⁄4", 13⁄16", 7⁄8", 15⁄16", 1", 11⁄16", 11⁄8", 13⁄16", 11⁄4". • Deep 6 point sockets: 1⁄2", 9⁄16", 5⁄8", 11⁄16", 3⁄4", 13⁄16", 7⁄8", 15⁄16", 1", 11⁄16", 11⁄8", 13⁄16", 11⁄4". • Quick-release ratchet; universal joint; 5" extension; 10" extension; 16" flex handle. • Includes high impact case.

Part No.

Description

SK12633

6 Point, 33 Piece Set

Shpg. Wt. (lbs.) 18.0

33 PIECE 1⁄2" DRIVE 12 POINT PROFESSIONAL SERIES SAE SOCKET SET • Standard 12 point sockets: 7⁄16", 1⁄2", 9⁄16", 5⁄8", 11⁄16", 3⁄4", 13⁄16", 7⁄8", 15⁄16", 1", 11⁄16", 11⁄8", 13⁄16", 11⁄4". • Deep 12 point sockets: 1⁄2", 9⁄16", 5⁄8", 11⁄16", 3⁄4", 13⁄16", 7⁄8", 15⁄16", 1", 11⁄16", 11⁄8", 13⁄16", 11⁄4". • Quick-release ratchet; universal joint; 5" extension; 10" extension; 16" flex handle. • Includes high impact case.

Part No.

Description

SK1233

33 Piece, 12 Point Socket Set

Shpg. Wt. (lbs.) 18.0

20 PIECE 1⁄2" DRIVE 12 POINT PROFESSIONAL SERIES SAE SOCKET SET • Standard 12 point sockets: 7⁄16", 1⁄2", 9⁄16", 5⁄8", 11⁄16", 3⁄4", 13⁄16", 7⁄8", 115⁄16", 1", 11⁄16", 11⁄8", 13⁄16", 11⁄4". • Quick-release ratchet; 16" flex handle; universal joint; 5" extension; 10" extension. • Includes high impact case.

Part No.

Description

SK1220

20 Piece, 12 Point Socket Set

Shpg. Wt. (lbs.) 14.0

20 PIECE 1⁄2" DRIVE 6 POINT PROFESSIONAL SERIES SAE SOCKET SET • Standard 6 point sockets: 7⁄16", 1⁄2", 9⁄16", 5⁄8", 11⁄16", 3⁄4", 13⁄16", 7⁄8", 115⁄16", 1", 11⁄16", 11⁄8", 13⁄16", 11⁄4". • Quick-release ratchet; 16" flex handle; universal joint; 5" extension; 10" extension. • Includes high impact case.

Part No.

Description

SK12620

20 Piece, 6 Point Socket Set

www.westwardtools.ca

Shpg. Wt. (lbs.) 14.0

W064-10.qxp

1⁄2"

2/8/10

2:32 PM

Page 64

DRIVE CHROME SOCKETS

19 PIECE 1⁄2" DRIVE PROFESSIONAL SERIES METRIC SOCKET SET • Metric sockets – 6 point: 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24 mm. • Quick-release ratchet; 16" flex handle; universal joint; 5" extension; 10" extension. • Includes high impact case.

Part No.

Description

MSK12619

19 Piece Metric Socket Set

Shpg. Wt. (lbs.) 14.0

16 PIECE 1⁄2" DRIVE SAE SOCKET SET • Standard SAE sockets – 6 point: 3⁄8", 7⁄16", 1⁄2", 9⁄16", 5⁄8", 11⁄16", 11⁄8", 13⁄16", 11⁄4". • Includes metal tray.

Part No.

Description

SK12616

16 Piece Socket Set

11⁄16", 3⁄4", 13⁄16", 7⁄8", 15⁄16",

1",

Shpg. Wt. (lbs.) 4.0

16 PIECE 1⁄2" DRIVE METRIC 6 POINT SOCKET SET • Metric sockets – 6 point: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24 mm. • Includes metal tray.

Part No.

Description

MSK12616

16 Piece Metric Socket Set

Shpg. Wt. (lbs.) 4.0

14 PIECE 1⁄2" DRIVE 12 POINT METRIC SOCKET SET • Metric sockets – 12 point: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 23, 24 mm. • Includes metal tray.

Part No.

Description

MSK1214

14 Piece Metric Socket Set

Shpg. Wt. (lbs.) 4.0

www.westwardtools.ca

W065-10.qxp

2/8/10

2:33 PM

Page 65

1⁄2"

DRIVE CHROME SOCKETS

12 PIECE 1⁄2" DRIVE DEEP 6 POINT SAE SOCKET SET • Standard 6 point SAE sockets: 1⁄2", 9⁄16", 5⁄8", 15⁄16", 1", 11⁄16", 11⁄8". • Includes metal tray.

Part No.

11⁄16", 3⁄4", 13⁄16", 7⁄8",

Description

Shpg. Wt. (lbs.)

DSK12612 12 Piece Deep 6 Point Socket Set

8.0

16 PIECE 1⁄2" DRIVE 6 POINT DEEP SAE SOCKET SET • 6 Point deep sockets: 3⁄8", 7⁄16", 1⁄2", 9⁄16", 5⁄8", 15⁄16", 1", 11⁄16", 11⁄8", 13⁄16", 11⁄4". • Includes high impact case.

Part No.

11⁄16", 3⁄4", 13⁄16", 7⁄8",

Description

DSK12616 16 Piece Deep 6 Point Socket Set

Shpg. Wt. (lbs.) 9.0

16 PIECE 1⁄2" DRIVE 12 POINT DEEP SAE SOCKET SET • 12 point deep sockets: 3⁄8", 7⁄16", 1⁄2", 9⁄16", 5⁄8", 15⁄16", 1", 11⁄16", 11⁄8", 13⁄16", 11⁄4". • Includes high impact case.

Part No.

Description

DSK1216

16 Piece 12 Point Socket Set

11⁄16", 3⁄4", 13⁄16", 7⁄8",

Shpg. Wt. (lbs.) 9.0

12 PIECE 1⁄2" DRIVE DEEP METRIC 6 POINT SOCKET SET • Deep metric sockets – 6 point: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20 mm. • Includes metal tray.

Part No.

Description

DMK12612 12 Piece Deep Metric Socket Set

www.westwardtools.ca

Shpg. Wt. (lbs.) 7.0

W066-10.qxp

1⁄2"

2/8/10

2:34 PM

Page 66

DRIVE CHROME SOCKETS

10 PIECE 1⁄2" DRIVE SAE HEX BIT SOCKET SET • Sizes: 3⁄16", 7⁄32", 1⁄4", 9⁄32", 5⁄16", 3⁄8", 1⁄2", 9⁄16" and 5⁄8". • Includes high impact case.

Part No.

Description

Shpg. Wt. (lbs.)

HSK1210

10 Piece Hex Bit Socket Set

2.0

10 PIECE 1⁄2" DRIVE SAE EXTRA LONG HEX BIT SOCKET SET • Sizes: 3⁄16", 7⁄32", 1⁄4", 9⁄32", 5⁄16", 3⁄8", 1⁄2", 9⁄16" and 5⁄8". • Includes high impact case.

Part No.

Description

HSK1210L

10 Piece Long Hex Bit Socket Set

Shpg. Wt. (lbs.) 2.2

10 PIECE 1⁄2" DRIVE METRIC EXTRA LONG HEX BIT SOCKET SET • Sizes: 5 mm, 6 mm, 7 mm, 8 mm, 9 mm, 10 mm, 12 mm, 14 mm, 17 mm. • Includes high impact case.

Part No.

Description

MHSK1210L

10 Piece Metric Hex Bit Socket Set

Shpg. Wt. (lbs.) 2.2

6 PIECE 1⁄2" DRIVE TORKS BIT SOCKET SET • Sizes: T30, T40, T45, T50, T55, T60. • Includes socket rail.

Part No.

Description

SKT6

6 Piece Torks Socket Set

Shpg. Wt. (lbs.) 1.1

8 PIECE 1⁄2" DRIVE SAE UNIVERSAL JOINT SOCKET SET Set includes: • 1⁄2" Drive universal joint sockets: (7) 1⁄2", 9⁄16", 5⁄8", • High impact case.

Part No.

Description

SKU12608

8 Piece U-Joint Socket Set

11⁄16", 3⁄4", 13⁄16", 7⁄8".

Shpg. Wt. (lbs.) 3.0

www.westwardtools.ca

W067-10.qxp

2/8/10

2:36 PM

Page 67

1⁄2" 1⁄2"

DRIVE QUICK RELEASE RATCHETS

Part No.

Length (in.)

Head Width (in.)

Head Thickness (in.) Shpg. Wt. (lbs.)

SA12A

9.75

1.7

0.7

1.5

SA12AL

1.7

0.7

2.0

SA12ARK

1⁄2"

Repair Kit

0.2

DRIVE FLEX RATCHET

Part No.

Length (in.)

Head Width (in.)

SA12AF

113⁄4

1.7

Head Thickness (in.) Shpg. Wt. (lbs.) 0.7

1.7

SA12AFRK Repair Kit

1⁄2"

0.2

DRIVE FLEX BARS

Part No.

Length (in.)

Shpg. Wt. (lbs.)

SA1201

1.1

SA1201L

1.5

SA1201RKT

Repair Kit

0.1

SA1201LRK

Repair Kit

0.2

1⁄2"

DRIVE “T” HANDLE

Part No.

Length (in.)

Head Width (in.)

Shpg. Wt. (lbs.)

SA1203

11.5

0.95

1.2

1⁄2"

DRIVE SPEEDER HANDLE

Part No.

Length (in.)

Shpg. Wt. (lbs.)

SA1207

15.8

1.4

1⁄2"

DRIVE CHROME SOCKETS

DRIVE EXTRA LONG EXTENSION SET

• 1⁄2" drive extensions, 18", 24" and 30". • Knurled grips.

Part No.

Description

SAK123XL

3 Piece Set

1⁄2"

Shpg. Wt. (lbs.) 2.8

DRIVE EXTENSION SET

• 1⁄2" drive extensions, 21⁄2", 5", 10" and 18". • Knurled grips.

Part No.

Description

SAK124

4 Piece Set

www.westwardtools.ca

Shpg. Wt. (lbs.) 2.0

W068-10.qxp

1⁄2"

2/8/10

2:37 PM

Page 68

DRIVE CHROME SOCKETS 1⁄2"

DRIVE EXTENSIONS

Part No.

Length (in.) Max. Outside Diameter (in.)

Shpg. Wt. (lbs.)

SA122

2.5

0.95

0.3

SA125

0.95

0.5

SA1210

0.95

1.0

SA1218

0.95

1.6

SA1224

0.95

2.4

SA1230

0.95

3.0

1⁄2"

DRIVE LOCKING EXTENSION SET

• Featuring a quick push button release. • Sockets are locked to the extension until you release them. • 3", 6" and 10" lengths.

Part No.

Description

SAK123

3 Piece Set

1⁄2"

2.0

DRIVE LOCKING EXTENSIONS

Part No.

Length (in.) Max. Outside Diameter (in.)

SAL123

Shpg. Wt. (lbs.)

0.95

0.3

SAL125

0.95

0.6

SAL1210

0.95

1.1

Length (in.)

Shpg. Wt. (lbs.)

1.8

0.1

1.4

0.3

1⁄2"

DRIVE ADAPTERS

Part No.

Description

SA1234

1⁄2"

SA1238

1⁄2"

SA1202

1⁄2"

F x 3⁄4" M Fx

3⁄8"

DRIVE UNIVERSAL JOINT

Part No.

Length (in.) Max. Outside Diameter (in.) 2.6

0.95

Shpg. Wt. (lbs.) 0.3

DRIVE DRAG LINK SOCKET

Part No.

Size (in.)

Shpg. Wt. (lbs.)

SDL1224

3⁄4

0.1

1⁄2"

DRIVE SPARK PLUG SOCKETS

Part No.

Shpg. Wt. (lbs.)

Size (in.)

Shpg. Wt. (lbs.)

SP126F

5⁄8

0.3

SP126K

13⁄16

0.3

www.westwardtools.ca

W069-10.qxp

2/8/10

2:38 PM

Page 69

1⁄2" Size (in.)

Length (in.)

Max. Outside Diameter (in.)

SS126A

3⁄8

1.50

0.86

SS126B

7⁄16

1.50

SS126C

1⁄2

1.50

SS126D

9⁄16

SS126F

5⁄8

SS126H

11⁄16

SS126I

Part No.

Bolt Clearance Shpg. Wt. (in.) (lbs.) 0.47

0.2

0.86

0.47

0.2

0.86

0.49

0.2

1.50

0.86

0.51

0.2

1.50

0.90

0.51

0.2

1.50

0.97

0.51

0.2

3⁄4

1.50

1.04

0.71

0.3

SS126K

13⁄16

1.50

1.12

0.71

0.3

SS126L

7⁄8

1.61

1.18

0.85

0.3

15⁄16

1.61

1.26

0.85

0.3

SS126N

1.61

1.34

0.85

0.4

SS126O

11⁄16

1.73

1.42

0.93

0.4

SS126P

11⁄8

1.73

1.48

0.96

0.5

SS126Q

13⁄16

1.73

1.57

0.96

0.5

SS126R

11⁄4

1.73

1.65

0.96

0.6

SS126M

Part No.

Size Length (mm) (mm)

Max. Outside Diameter (mm)

1⁄2"

DRIVE SAE SOCKETS – 6 POINT

Bolt Clearance Shpg. Wt. (mm) (lbs.)

MS12606

38.0

21.90

9.00

0.2

MS12607

38.0

21.90

10.00

0.2

MS12608

38.0

21.90

10.00

0.2

MS12609

38.0

21.90

11.00

0.2

MS12610

38.0

21.90

12.00

0.2

MS12611

38.0

21.90

12.00

0.2

MS12612

38.0

21.90

12.00

0.2

MS12613

38.0

21.90

12.50

0.2

MS12614

38.0

21.90

13.00

0.2

MS12615

38.0

21.60

13.00

0.2

MS12616

38.0

22.90

13.00

0.2

MS12617

38.0

24.10

13.00

0.2

MS12618

38.0

25.40

18.00

0.2

MS12619

38.0

26.50

18.00

0.2

MS12620

38.0

27.80

18.00

0.3

MS12621

38.0

28.50

18.00

0.3

MS12622

41.0

29.90

21.50

0.3

MS12623

41.0

31.10

21.50

0.3

MS12624

41.0

32.00

21.50

0.3

MS12625

41.0

33.30

21.50

0.4

MS12626

44.0

34.50

23.50

0.4

MS12627

44.0

36.00

23.50

0.5

MS12628

44.0

37.50

24.50

0.5

MS12629

44.0

38.80

24.50

0.5

MS12630

44.0

39.80

24.50

0.6

MS12632

44.0

42.00

24.50

0.6

www.westwardtools.ca

DRIVE CHROME SOCKETS

1⁄2"

DRIVE METRIC SOCKETS – 6 POINT

W070-10.qxp

1⁄2"

2/8/10

2:38 PM

Page 70

DRIVE CHROME SOCKETS

DRIVE SAE SOCKETS – 12 POINT

Part No.

Size (in.)

Length (in.)

Max. Outside Diameter (in.)

SS122A

3⁄8

1.50

0.86

0.47

0.2

SS122B

7⁄16

1.50

0.86

0.47

0.2

SS122C

1⁄2

1.50

0.86

0.49

0.2

SS122D

9⁄16

1.50

0.86

0.51

0.2

SS122F

5⁄8

1.50

0.90

0.51

0.2

SS122H

11⁄16

1.50

0.97

0.51

0.2

SS122I

3⁄4

1.50

1.04

0.71

0.2

SS122K

13⁄16

1.50

1.12

0.71

0.3

SS122L

7⁄8

1.61

1.18

0.85

0.3

SS122M

15⁄16

1.61

1.26

0.85

0.3

SS122N

1.61

1.34

0.85

0.4

SS122O

11⁄16

1.73

1.42

0.93

0.4

SS122P

11⁄8

1.73

1.48

0.96

0.5

SS122Q

13⁄16

1.73

1.57

0.96

0.5

SS122R

11⁄4

1.73

1.65

0.96

0.6

Part No.

1⁄2"

DRIVE METRIC SOCKETS – 12 POINT

Bolt Clearance Shpg. Wt. (in.) (lbs.)

Size Length (mm) (mm)

Max. Outside Diameter (mm)

Bolt Clearance Shpg. Wt. (mm) (lbs.)

MS1206

38.0

21.90

9.00

0.1

MS1207

38.0

21.90

10.00

0.1

MS1208

38.0

21.90

10.00

0.1

MS1209

38.0

21.90

11.00

0.1

MS1210

38.0

21.90

12.00

0.2

MS1211

38.0

21.90

12.00

0.2

MS1212

38.0

21.90

12.00

0.2

MS1213

38.0

21.90

12.50

0.2

MS1214

38.0

21.90

13.00

0.2

MS1215

38.0

21.60

13.00

0.2

MS1216

38.0

22.90

13.00

0.2

MS1217

38.0

24.10

13.00

0.2

MS1218

38.0

25.40

18.00

0.2

MS1219

38.0

26.50

18.00

0.2

MS1220

38.0

27.80

18.00

0.3

MS1221

38.0

28.50

18.00

0.3

MS1222

41.0

29.90

21.50

0.3

MS1223

41.0

31.10

21.50

0.3

MS1224

41.0

32.00

21.50

0.3

MS1225

41.0

33.30

21.50

0.4

MS1226

44.0

34.50

23.50

0.4

MS1227

44.0

36.00

23.50

0.5

MS1228

44.0

37.50

24.50

0.5

MS1229

44.0

38.80

24.50

0.5

MS1230

44.0

39.80

24.50

0.5

MS1232

44.0

42.00

24.50

0.6

www.westwardtools.ca

W071-10.qxp

2/8/10

2:39 PM

Page 71

1⁄2" 1⁄2"

DRIVE DEEP SAE SOCKETS – 6 POINT

Part No.

Size (in.)

Length (in.)

Max. Outside Diameter (in.)

DS126A

3⁄8

3.03

0.86

0.98

0.3

DS126B

7⁄16

3.03

0.86

0.98

0.3

DS126C

1⁄2

3.03

0.86

0.98

0.3

DS126D

9⁄16

3.03

0.86

0.98

0.3

DS126F

5⁄8

3.03

0.90

1.18

0.3

DS126H

11⁄16

3.03

0.97

1.18

0.3

DS126I

3⁄4

3.03

1.04

1.18

0.4

DS126K

13⁄16

3.03

1.12

1.38

0.4

DS126L

7⁄8

3.03

1.18

1.38

0.5

DS126M

15⁄16

3.03

1.26

1.38

0.5

DS126N

3.03

1.34

1.38

0.6

DS126O

11⁄16

3.03

1.42

1.38

0.7

DS126P

11⁄8

3.03

1.48

1.38

0.8

DS126Q

13⁄16

3.03

1.57

1.38

0.8

DS126R

11⁄4

3.03

1.65

1.38

1.0

1⁄2"

DRIVE CHROME SOCKETS

Bolt Clearance Shpg. Wt. (in.) (lbs.)

DRIVE DEEP METRIC SOCKETS – 6 POINT

Part No.

Size Length Max. Outside (mm) (mm) Diameter (mm)

Bolt Clearance Shpg. Wt. (mm) (lbs.)

DMS12610

77.0

21.90

25.00

0.3

DMS12611

77.0

21.90

25.00

0.3

DMS12612

77.0

21.90

25.00

0.3

DMS12613

77.0

21.90

25.00

0.3

DMS12614

77.0

21.90

25.00

0.3

DMS12615

77.0

21.60

30.00

0.3

DMS12616

77.0

22.90

30.00

0.3

DMS12617

77.0

24.10

30.00

0.4

DMS12618

77.0

25.40

30.00

0.4

DMS12619

77.0

26.50

30.00

0.4

DMS12620

77.0

27.80

35.00

0.5

DMS12621

77.0

28.50

35.00

0.5

DMS12622

77.0

29.90

35.00

0.5

DMS12623

77.0

31.10

35.00

0.6

DMS12624

77.0

32.00

35.00

0.7

DMS12625

77.0

33.30

35.00

0.6

DMS12626

77.0

34.50

35.00

0.6

DMS12627

77.0

36.00

35.00

0.7

DMS12628

77.0

37.50

35.00

0.8

DMS12629

77.0

38.80

35.00

0.9

DMS12630

77.0

39.80

35.00

0.9

DMS12632

77.0

42.00

35.00

1.0

www.westwardtools.ca

W072-10.qxp

1⁄2"

2/8/10

2:41 PM

Page 72

DRIVE CHROME SOCKETS 1⁄2"

DRIVE DEEP SAE SOCKETS – 12 POINT

Part No.

Size (in.)

DS122A

3⁄8

3.03

0.86

0.98

0.3

DS122B

7⁄16

3.03

0.86

0.98

0.3

DS122C

1⁄2

3.03

0.86

0.98

0.3

DS122D

9⁄16

3.03

0.86

0.98

0.3

DS122F

5⁄8

3.03

0.90

1.18

0.3

DS122H

11⁄16

3.03

0.97

1.18

0.3

DS122I

3⁄4

3.03

1.04

1.18

0.4

DS122K

13⁄16

3.03

1.12

1.38

0.4

DS122L

7⁄8

3.03

1.18

1.38

0.5

DS122M

15⁄16

3.03

1.26

1.38

0.5

DS122N

3.03

1.34

1.38

0.6

DS122O

11⁄16

3.03

1.42

1.38

0.7

DS122P

11⁄8

3.03

1.48

1.38

0.8

DS122Q

13⁄16

3.03

1.57

1.38

0.8

DS122R

11⁄4

3.03

1.65

1.38

1.0

1⁄2"

DRIVE SHORT HEX BIT SOCKETS

Part No.

Size (in.)

Length (in.)

Shpg. Wt. (lbs.)

HBS12-6

3⁄16

2.2

0.2

HBS12-7

7⁄32

2.2

0.2

HBS12-8

1⁄4

2.2

0.2

HBS12-9

9⁄32

2.2

0.2

HBS12-10

5⁄16

2.3

0.4

HBS12-12

3⁄8

2.3

0.4

HBS12-14

7⁄16

2.3

0.4

HBS12-16

1⁄2

2.3

0.5

HBS12-18

9⁄16

2.3

0.5

HBS12-20

5⁄8

2.3

0.8

Size (in.)

Length (in.)

Shpg. Wt. (lbs.)

HBS12-6L

3⁄16

27⁄8

0.2

HBS12-7L

7⁄32

27⁄8

0.2

HBS12-8L

1⁄4

27⁄8

0.2

HBS12-9L

9⁄32

27⁄8

0.4

HBS12-10L

5⁄16

27⁄8

0.4

HBS12-12L

3⁄8

27⁄8

0.4

HBS12-16L

1⁄2

27⁄8

0.5

HBS12-18L

9⁄16

27⁄8

0.5

HBS12-20L

5⁄8

27⁄8

0.9

1⁄2"

DRIVE LONG HEX BIT SOCKETS

Part No.

Length Max. Outside Bolt Shpg. Wt. (in.) Diameter (in.) Clearance (in.) (lbs.)

www.westwardtools.ca

W073-10.qxp

2/8/10

2:41 PM

Page 73

1⁄2" 1⁄2"

DRIVE SHORT METRIC HEX BIT SOCKETS

Part No.

Size (mm)

Length (mm)

Shpg. Wt. (lbs.)

MHBS12-12

58.5

0.2

MHBS12-14

58.5

0.2

MHBS12-16

58.5

0.2

1⁄2"

DRIVE LONG METRIC HEX BIT SOCKETS

Part No.

Size (mm)

Length (mm)

Shpg. Wt. (lbs.)

MHBS12-5L

73.0

0.2

MHBS12-6L

73.0

0.2

MHBS12-7L

73.0

0.2

MHBS12-8L

73.0

0.4

MHBS12-9L

73.0

0.4

MHBS12-10L

73.0

0.4

MHBS12-12L

73.0

0.5

MHBS12-14L

73.0

0.5

MHBS12-17L

73.0

0.9

1⁄2"

DRIVE TORKS SOCKETS

Part No.

Size

Length (in.)

Shpg. Wt. (lbs.)

TS1240

T40

2.15

0.1

TS1245

T45

2.15

0.1

TS1247

T47

2.15

0.1

TS1250

T50

2.15

0.1

TS1255

T55

2.15

0.1

TS1260

T60

2.15

0.1

TS1270

T70

2.15

0.1

1⁄2"

DRIVE CHROME SOCKETS

SAE UNIVERSAL SOCKETS

Part No.

Size (in.)

Shpg. Wt. (lbs.)

SSU126C

1⁄2

0.2

SSU126D

9⁄16

0.3

SSU126F

5⁄8

0.3

SSU126H

11⁄16

0.3

SSU126I

3⁄4

0.4

SSU126K

13⁄16

0.4

SSU126L

7⁄8

0.5

www.westwardtools.ca

W074-10.qxp

3⁄4"

2/8/10

2:42 PM

Page 74

DRIVE CHROME SOCKETS

22 PIECE 3⁄4" DRIVE SAE SOCKET SET – 12 POINT • Standard SAE sockets – 12 points: 7⁄8", 15⁄16", 1", 11⁄16", 11⁄8", 13⁄16", 11⁄4", 15⁄16", 13⁄8", 17⁄16", 11⁄2", 15⁄8", 13⁄4", 113⁄16", 17⁄8", 2". • Quick-release ratchet; 18" sliding T-handle; 4" extension; 8" extension; 16" extension. • Includes high impact case.

Part No.

Description

Shpg. Wt. (lbs.)

SK3421

22 Piece Socket Set

45.0

17 PIECE 3⁄4" DRIVE SAE SOCKET SET • Standard SAE sockets – 12 points: 7⁄8", 15⁄16", 1", 11⁄16", 11⁄8", 13⁄16", 11⁄4", 15⁄16", 13⁄8", 17⁄16", 11⁄2", 15⁄8", 13⁄4", 113⁄16", 17⁄8", 2". • Includes metal case.

Part No.

Description

Shpg. Wt. (lbs.)

SK3417

17 Piece Socket Set

30.0

17 PIECE 3⁄4" DRIVE METRIC SOCKET SETS • Metric sockets – 12 points: 22, 23, 24, 25, 26, 27, 29, 30, 32, 34, 35, 36, 38, 41, 46, 50 mm. • Includes metal case.

Part No.

Description

Shpg. Wt. (lbs.)

MSK3417

17 Piece Metric Socket Set

30.0

www.westwardtools.ca

W075-10.qxp

2/8/10

2:43 PM

Page 75

3⁄4"

DRIVE CHROME SOCKETS

17 PIECE 3⁄4" DRIVE DEEP SOCKET SET • Deep sockets – 6 point: 7⁄8", 15⁄16", 1", 11⁄16", 11⁄8", 13⁄16", 11⁄4", 15⁄16", 13⁄8", 17⁄16", 11⁄2", 15⁄8", 13⁄4", 113⁄16", 17⁄8", 2". • Includes metal box.

Part No.

Description

DSK3417

17 Piece Deep Socket Set

3⁄4"

45.0

DRIVE RATCHET

Part No.

Length (in.)

SA3400

19.6

RRK34

Repair Kit

3⁄4"

Shpg. Wt. (lbs.)

Head Head Shpg. Wt. Width (in.) Thickness (in.) (lbs.) 2.3

1.15

6.1 0.4

DRIVE FLEX HANDLE

Part No.

Description

SAH3419

19" Length

4.2

SAH3419RK

Repair Kit

4.2

3⁄4"

SLIDING T-HANDLE

Part No.

Description

SA3418

18" Sliding T-Handle

3⁄4"

Shpg. Wt. (lbs.)

Shpg. Wt. (lbs.) 3.2

DRIVE EXTENSIONS

Part No.

Description

Shpg. Wt. (lbs.)

SA3404

4" Extension

1.0

SA3405

8" Extension

1.4

SA3406

16" Extension

2.4

www.westwardtools.ca

W076-10.qxp

3⁄4"

2/8/10

2:44 PM

Page 76

DRIVE CHROME SOCKETS

3⁄4"

DRIVE UNIVERSAL JOINT

Part No.

Description

Shpg. Wt. (lbs.)

SA3402

Universal Joint

1.0

3⁄4"

DRIVE ADAPTERS

Part No.

Description

SA3410 SA3412

3⁄4"

Adapter

3⁄4"

Shpg. Wt. (lbs.)

F x 1" M Fx

1⁄2"

1.0

0.5

DRIVE SAE SOCKETS – 12 POINT

Part No. SS342L SS342M

Adapter

3⁄4"

Size (in.)

Length (in.)

Max. Outside Diameter (in.)

Bolt Clearance (in.)

Shpg. Wt. (lbs.)

7⁄8

1.97

1.4

0.6

0.5

15⁄16

2.01

1.4

0.6

0.5

SS342N

2.05

1.5

0.6

0.5

SS342O

11⁄16

2.05

1.5

0.9

0.5

SS342P

11⁄8

2.05

1.6

0.9

0.5

SS342Q

13⁄16

2.13

1.7

0.9

0.6

SS342R

11⁄4

2.20

1.7

1.0

0.6

SS342S

15⁄16

2.20

1.8

1.0

0.7

SS342T

13⁄8

2.28

1.9

1.0

0.8

SS342U

17⁄16

2.28

2.0

1.1

0.9

SS342V

11⁄2

2.36

2.0

1.1

1.0

SS342X

15⁄8

2.52

2.2

1.2

SS342Y

111⁄16

2.56

2.3

1.3

SS342Z

13⁄4

2.60

2.4

1.3

1.4

SS342ZA

113⁄16

2.68

2.4

1.3

1.4

SS342ZB

17⁄8

2.76

2.5

1.3

1.6

SS342ZC

2.83

2.7

1.4

1.8

SS342ZG

23⁄16

2.99

2.9

1.5

2.0

SS342ZH

21⁄4

2.99

3.0

1.6

2.1

SS342ZK

23⁄8

3.07

3.1

1.6

2.3

SS342ZM

21⁄2

3.23

3.3

1.7

2.6

www.westwardtools.ca

W077-10.qxp

2/8/10

2:45 PM

Page 77

3⁄4" 3⁄4"

DRIVE DEEP SAE SOCKETS – 6 POINT

Part No.

Size (in.)

DS346L

7⁄8

3.54

1.4

1.0

0.8

15⁄16

3.54

1.4

1.0

0.8

DS346N

3.54

1.5

1.0

DS346O

11⁄16

3.54

1.5

1.1

DS346P

11⁄8

3.54

1.6

1.1

DS346Q

13⁄16

3.54

1.7

1.1

1.3

DS346R

11⁄4

3.54

1.7

1.1

1.3

DS346S

15⁄16

3.54

1.8

1.2

1.4

DS346T

13⁄8

3.54

1.9

1.2

1.5

DS346U

17⁄16

3.54

2.0

1.2

1.5

DS346V

11⁄2

3.54

2.0

1.3

1.6

DS346X

15⁄8

3.54

2.2

1.3

1.8

DS346Z

13⁄4

3.54

2.4

1.3

2.4

DS346ZA

113⁄16

3.54

2.4

1.3

2.4

DS346ZB

17⁄8

3.54

2.5

1.3

2.7

DS346ZC

3.54

2.6

1.4

2.9

DS346M

3⁄4"

DRIVE CHROME SOCKETS

Length Max. Outside Bolt Clearance (in.) Diameter (in.) (in.)

Shpg. Wt. (lbs.)

DRIVE METRIC – 12 POINT SOCKETS

Part No.

Size (mm)

Length (mm)

Shpg. Wt. (lbs.)

MS3422

0.5

MS3423

0.5

MS3424

0.5

MS3425

0.5

MS3426

0.5

MS3427

0.6

MS3429

0.6

MS3430

0.6

MS3432

0.7

MS3434

0.7

MS3435

0.9

MS3436

0.9

MS3438

1.1

MS3441

1.2

MS3446

1.5

MS3450

1.8

www.westwardtools.ca

W078-10.qxp

2/8/10

2:45 PM

Page 78

1" DRIVE CHROME SOCKETS 24 PIECE 1" DRIVE SAE SOCKET SET • SAE sockets sizes: 17⁄16", 11⁄2", 15⁄8", 111⁄16", 13⁄4", 113⁄16", 17⁄8", 2", 21⁄8", 23⁄16", 21⁄4", 23⁄8", 21⁄2", 25⁄8", 23⁄4", 215⁄16", 31⁄8". • Ratchet head, 6" extension, 22" bar, T-bar head, universal joint, steel case, standard sockets 12 point: 17⁄8" to 31⁄8". • Includes metal box.

Part No.

Description

SK124

24 Piece Socket Set

Shpg. Wt. (lbs.) 90.0

17 PIECE 1" DRIVE SAE SOCKET SET • 12 point socket sizes: 17⁄16", 11⁄2", 15⁄8", 111⁄16", 13⁄4", 2", 21⁄4", 23⁄16", 23⁄8", 21⁄2". • Ratchet head, T-bar head, 6" and 16" extensions and 22" bar for the ratchet head. • Includes metal box.

Part No.

Description

Shpg. Wt. (lbs.)

SK117

17 Piece Set

90.0

1" DRIVE RATCHET Part No.

Description

SA100

Ratchet Head Only

Shpg. Wt. (lbs.) 2.7

RRK1

Repair Kit

0.5

1" DRIVE SLIDING BAR For use with SA100 or SA101.

Part No.

Description

SA108

22" Bar

Shpg. Wt. (lbs.) 5.3

www.westwardtools.ca

W079-10.qxp

2/8/10

2:46 PM

Page 79

1" DRIVE CHROME SOCKETS

1" DRIVE FLEX HANDLE Part No.

Description

SA119

28" Flex Handle

Shpg. Wt. (lbs.) 7.6

SA119RK Repair Kit

0.3

1" DRIVE T-BAR HEAD Part No.

Description

Shpg. Wt. (lbs.)

SA101

T-Bar Head Only

0.1

1" DRIVE EXTENSIONS Part No.

Description

Shpg. Wt. (lbs.)

SA105

Extension 6"

2.4

SA116

Extension 16"

4.9

1" DRIVE UNIVERSAL JOINT Part No.

Description

Shpg. Wt. (lbs.)

SA1002

Universal Joint

1.4

1" DRIVE ADAPTER Part No. SA1034

Description Adapter 1" F x

Shpg. Wt. (lbs.) 3⁄4"

www.westwardtools.ca

1.3

W080-10.qxp

2/8/10

2:47 PM

Page 80

1" DRIVE CHROME SOCKETS

1" DRIVE SAE SOCKETS – 12 POINT

1" DRIVE METRIC SOCKETS – 12 POINT

Part No.

Size (in.)

Length Bolt Clearance Max. Outside Shpg. Wt. (in.) (in.) Diameter (in.) (lbs.)

SS12U

17⁄16

2.56

1.10

2.05

1.5

SS12V

11⁄2

2.56

1.18

2.13

1.6

SS12X

15⁄8

2.76

1.26

2.24

1.8

SS12Y

111⁄16

2.76

1.26

2.36

1.9

SS12Z

13⁄4

2.95

1.34

2.48

2.0

SS12ZA

113⁄16

2.95

1.34

2.56

2.0

SS12ZB

17⁄8

2.95

1.34

2.64

2.5

SS12ZC

2.95

1.34

2.76

2.5

SS12ZD

21⁄16

3.15

1.57

2.83

2.6

SS12ZF

21⁄8

3.15

1.57

2.91

3.0

SS12ZG

23⁄16

3.15

1.57

2.99

3.2

SS12ZH

21⁄4

3.15

1.57

3.07

3.4

SS12ZI

25⁄16

3.15

1.57

3.15

3.5

SS12ZK

23⁄8

3.31

1.65

3.23

3.6

SS12ZL

27⁄16

3.43

1.73

3.31

3.8

SS12ZM

21⁄2

3.43

1.73

3.39

4.3

SS12ZN

29⁄16

3.54

1.73

3.46

4.9

SS12ZO

25⁄8

3.54

1.73

3.54

5.0

SS12ZP

23⁄4

3.66

1.89

3.70

5.4

SS12ZQ

215⁄16

3.82

2.05

3.94

7.2

SS12ZR

—

2.13

4.02

7.5

SS12ZS

31⁄8

4.06

2.13

4.13

8.2

Part No.

Size (mm)

Length Bolt Clearance Max. Outside (mm) (mm) Diameter (mm)

Shpg. Wt. (lbs.)

MS1035

61.0

24.0

48.0

1.0

MS1036

65.0

28.0

51.0

1.0

MS1038

65.0

30.0

54.0

1.1

MS1041

70.0

32.0

57.0

1.2

MS1046

75.0

34.0

65.0

1.8

MS1050

75.0

34.0

70.0

2.3

MS1054

80.0

40.0

74.0

2.5

MS1055

80.0

40.0

76.0

2.5

MS1058

80.0

40.0

79.0

2.8

MS1060

84.0

42.0

82.0

3.0

MS1063

87.0

44.0

86.0

3.3

MS1065

87.0

44.0

88.0

3.5

MS1067

90.0

46.0

90.0

3.6

MS1070

93.0

48.0

94.0

4.4

MS1071

93.0

48.0

95.0

4.6

MS1075

97.0

52.0

100.0

5.2

MS1077

103.0

54.0

102.0

5.5

MS1080

103.0

54.0

105.0

5.7

www.westwardtools.ca

W081-10.qxp

2/12/10

1:16 PM

Page 81

IMPACT SOCKETS, SETS & ACCESSORIES

3/8" Drive Sets . . . . . . . . . . . . . 82-83 3/8" Drive Sockets & Accessories . . . . . . . . . . . . . . . . . . . . . . 83-85 1/2" Drive Sets . . . . . . . . . . . . . 85-87 1/2" Drive Sockets & Accessories . . . . . . . . . . . . . . . . . . . . . . 87-90 3/4" Drive Sets . . . . . . . . . . . . . . . 91 3/4" Drive Sockets & Accessories . . . . . . . . . . . . . . . . . . . . . . 92-94 1" Drive Sets . . . . . . . . . . . . . . . . 95 1" Drive Sockets & Accessories . . . . . . . . . . . . . . . . . . . . . . 95-97 11/2" Drive Sockets . . . . . . . . . . . . 98

W082-10.qxp

3⁄8"

2/8/10

2:54 PM

Page 82

DRIVE IMPACT SOCKETS

10 PIECE 3⁄8" DRIVE SAE IMPACT SOCKET SET • 6 point impact sockets in 3⁄8", 7⁄16", 1⁄2", 9⁄16", 5⁄8", • Includes a high impact case.

11⁄16", 3⁄4", 13⁄16", 7⁄8".

Part No.

Description

Shpg. Wt. (lbs.)

PSK3810

10 Piece Set

1.2

13 PIECE 3⁄8" DRIVE METRIC IMPACT SOCKET SET • Contains metric impact sockets – 6 point: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm. • Includes a high impact case.

Part No.

Description

Shpg. Wt. (lbs.)

PMK3813

13 Piece Set

1.4

10 PIECE 3⁄8" DRIVE SAE DEEP IMPACT SOCKET SET • Contains 6 point impact sockets 3⁄8", 7⁄16", 1⁄2", 9⁄16", 5⁄8", 13⁄16", 7⁄8". • Includes high impact case.

11⁄16", 3⁄4",

Part No.

Description

Shpg. Wt. (lbs.)

PSDK3810

10 Piece Set

1.7

11 PIECE 3⁄8" DRIVE DEEP METRIC IMPACT SOCKET SET • Contains deep metric impact sockets – 6 point: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm. • Includes case.

Part No.

Description

Shpg. Wt. (lbs.)

PMDK3811

11 Piece Set

1.6

www.westwardtools.ca

W083-10.qxp

2/8/10

2:55 PM

Page 83

3⁄8"

DRIVE IMPACT SOCKETS

8 PIECE 3⁄8" DRIVE SAE UNIVERSAL JOINT IMPACT SOCKET SET • Contains SAE universal joint impact socket: 3⁄8", 7⁄16", 1⁄2", 9⁄16", 5⁄8", 11⁄16", 3⁄4". • Includes high impact case.

Part No.

Description

PSKU388

8 Piece Set

Shpg. Wt. (lbs.) 1.0

12 PIECE 3⁄8" DRIVE METRIC UNIVERSAL IMPACT SOCKET SET • Contains universal joint impact sockets: 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm. • Includes high impact case.

Part No.

Description

Shpg. Wt. (lbs.)

PMKU3812

12 Piece Set

1.6

3⁄8"

DRIVE IMPACT EXTENSIONS Max. Outside Diameter (in.) Shpg. Wt. (lbs.)

Part No.

Length (in.)

PSA3803

0.70

0.2

PSA3806

0.70

0.3

3⁄8"

DRIVE IMPACT UNIVERSAL JOINT

Part No.

Description

PSA3802

3⁄8"

Universal Joint

Shpg. Wt. (lbs.)

2.13

0.2

Length (in.)

Shpg. Wt. (lbs.)

1.42

0.1

DRIVE IMPACT ADAPTER

Part No.

Description

PSA3812

Adapter 3⁄8" F x 1⁄2" M

3⁄8"

Length (in.)

DRIVE SAE REGULAR LENGTH IMPACT SOCKETS

Size Length Bolt Clearance Max. Outside Shpg. Part No. (in.) (in.) (in.) Diameter (in.) Wt. (lbs.) PS3864

5⁄16

1.01

0.31

0.74

0.1

PS386A

3⁄8

1.01

0.31

0.74

0.1

PS386B

7⁄16

1.01

0.31

0.74

0.1

PS386C

1⁄2

1.01

0.35

0.79

0.1

PS386D

9⁄16

1.07

0.51

0.83

0.2

PS386F

5⁄8

1.07

0.51

0.92

0.2

PS386H

11⁄16

1.07

0.51

0.94

0.2

3⁄4

1.14

0.55

1.04

0.3

PS386I

www.westwardtools.ca

W084-10.qxp

3⁄8"

2/8/10

2:56 PM

Page 84

DRIVE IMPACT SOCKETS 3⁄8"

DRIVE METRIC REGULAR LENGTH IMPACT SOCKETS

Part No.

Max. Outside Diameter (mm)

Shpg. Wt. (lbs.)

PM3808

25.5

19.2

0.1

PM3809

25.5

19.2

0.1

PM3810

25.5

19.2

0.1

PM3811

25.5

19.2

0.1

PM3812

25.5

19.2

0.1

PM3813

25.5

22.2

0.1

PM3814

27.0

22.2

0.2

PM3815

27.0

22.2

0.2

PM3816

27.0

23.4

0.2

PM3817

27.0

24.0

0.2

PM3818

27.0

25.5

0.3

PM3819

29.0

26.5

0.3

3⁄8"

DRIVE SAE DEEP IMPACT SOCKETS

Part No.

Size Length Bolt Clearance (in.) (in.) (in.)

Max. Outside Shpg. Wt. Diameter (in.) (lbs.)

PSD3864

5⁄16

2.50

0.59

0.74

0.2

PSD386A

3⁄8

2.50

1.00

0.74

0.2

PSD386B

7⁄16

2.50

1.00

0.74

0.2

PSD386C

1⁄2

2.50

1.00

0.79

0.2

PSD386D

9⁄16

2.50

1.00

0.83

0.3

PSD386F

5⁄8

2.50

1.00

0.92

0.3

PSD386H

11⁄16

2.50

1.00

0.94

0.3

3⁄4

2.50

1.00

1.04

0.3

PSD386I

3⁄8"

DRIVE DEEP METRIC IMPACT SOCKETS

Part No.

Size Length Bolt Clearance (mm) (mm) (mm)

Size Length Bolt Clearance Max. Outside Shpg. Wt. (mm) (mm) (mm) Diameter (mm) (lbs.)

PMD3810

63.0

23.5

19.2

0.2

PMD3811

63.0

23.5

19.2

0.2

PMD3812

63.0

23.5

19.2

0.2

PMD3813

63.0

23.5

22.2

0.2

PMD3814

63.0

23.5

22.2

0.2

PMD3815

63.0

23.5

22.2

0.2

PMD3816

63.0

23.5

23.4

0.2

PMD3817

63.0

23.5

23.9

0.2

PMD3818

63.0

23.5

25.5

0.3

PMD3819

63.0

23.5

26.5

0.3

www.westwardtools.ca

W085-10.qxp

2/8/10

3:17 PM

Page 85

3⁄8" 3⁄8"

DRIVE SAE UNIVERSAL JOINT IMPACT SOCKETS

Part No.

Size (in.)

Shpg. Wt. (lbs.)

PSU38A

3⁄8

0.1

PSU38B

7⁄16

0.2

PSU38C

1⁄2

0.2

PSU38D

9⁄16

0.2

PSU38F

5⁄8

0.2

PSU38H

11⁄16

0.3

3⁄4

0.3

PSU38I

3⁄8"

& 1⁄2" DRIVE IMPACT SOCKETS

DRIVE METRIC UNIVERSAL JOINT IMPACT SOCKETS

Part No.

Size (mm)

Shpg. Wt. (lbs.)

PMU3809

0.1

PMU3810

0.2

PMU3811

0.2

PMU3812

0.2

PMU3813

0.2

PMU3814

0.2

PMU3815

0.2

PMU3816

0.2

PMU3817

0.3

PMU3818

0.3

PMU3819

0.3

17 PIECE 1⁄2" DRIVE SAE IMPACT SOCKET SET • Contains 6 – point impact sockets: 3⁄8", 7⁄16", 1⁄2", 9⁄16", 5⁄8", 3⁄4", 13⁄16", 7⁄8", 15⁄16", 1", 11⁄16", 11⁄8", 13⁄16", 11⁄4", 15⁄16". • Includes high impact case.

11⁄16",

Part No.

Description

Shpg. Wt. (lbs.)

PSK1217

17 Piece Set

4.5

www.westwardtools.ca

W086-10.qxp

1⁄2"

2/8/10

3:17 PM

Page 86

DRIVE IMPACT SOCKETS

18 PIECE 1⁄2" DRIVE METRIC IMPACT SOCKET SET • Contains 6 – point impact sockets: 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 26 mm. • Includes high impact case.

Part No.

Description

Shpg. Wt. (lbs.)

PMK1218

18 Piece Set

6.3

12 PIECE 1⁄2" DRIVE DEEP SAE IMPACT SOCKET SET • Contains 6 – point impact sockets: 3⁄8", 7⁄16", 1⁄2", 9⁄16", 5⁄8", 3⁄4", 13⁄16", 7⁄8", 15⁄16", 1". • Includes case.

11⁄16",

Part No.

Description

Shpg. Wt. (lbs.)

PSDK1212

12 Piece Set

7.5

17 PIECE 1⁄2" DRIVE DEEP SAE IMPACT SOCKET SET • Contains 6 – point impact sockets: 3⁄8", 7⁄16", 1⁄2", 9⁄16", 5⁄8", 13⁄16", 7⁄8", 15⁄16", 1", 11⁄16", 11⁄8", 13⁄16", 11⁄4", 15⁄16". • Includes a high impact case.

11⁄16", 3⁄4",

Part No.

Description

Shpg. Wt. (lbs.)

PSDK1217

17 Piece Set

10.3

18 PIECE 1⁄2" DRIVE DEEP METRIC IMPACT SOCKET SET • Contains 6 – point deep impact sockets: (17) 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 26 mm. • Includes a high impact case.

Part No.

Description

Shpg. Wt. (lbs.)

PMDK1218

18 Piece Set

8.5

www.westwardtools.ca

W087-10.qxp

2/8/10

3:18 PM

Page 87

1/2" DRIVE IMPACT SOCKETS 8 PIECE 1⁄2" DRIVE SAE UNIVERSAL IMPACT SOCKET SET • Contains universal joint impact socket: 1⁄2", 9⁄16", 5⁄8", 11⁄16", 3⁄4", 13⁄16", 7⁄8". • Includes a high impact case.

Part No.

Description

PSKU128

8 Piece Set

Shpg. Wt. (lbs.) 3.5

12 PIECE 1⁄2" DRIVE METRIC UNIVERSAL JOINT IMPACT SOCKET SET • Contains universal joint impact sockets: 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23 mm. • Includes a high impact case.

Part No.

Description

Shpg. Wt. (lbs.)

PMKU1212 12 Piece Set

1⁄2"

5.0

DRIVE IMPACT EXTENSIONS Max. Outside Diameter (in.) Shpg. Wt. (lbs.)

Part No.

Length (in.)

PSA1203

0.95

0.2

PSA1205

0.95

0.4

PSA1210

0.95

0.8

1⁄2"

DRIVE IMPACT UNIVERSAL JOINT

Part No.

Description

Length (in.)

Shpg. Wt. (lbs.)

PSA1202

Universal Joint

2.65

0.3

IMPACT ADAPTERS Part No.

Description

PSA1234

1⁄2"

F x 3⁄4" M

0.2

PSA1238

1⁄2"

F x 3⁄8" M

0.1

www.westwardtools.ca

Shpg. Wt. (lbs.)

W088-10.qxp

2/8/10

3:19 PM

Page 88

1/2" DRIVE IMPACT SOCKETS 1⁄2"

DRIVE SAE STANDARD IMPACT SOCKETS

Part No.

Size (in.)

Length (in.)

Bolt Clearance (in.)

Max. Outside Diameter (in.)

Shpg. Wt. (lbs.)

PS126A

3⁄8

1.50

0.47

0.94

0.2

PS126B

7⁄16

1.50

0.47

0.94

0.2

PS126C

1⁄2

1.50

0.49

0.94

0.2

PS126D

9⁄16

1.50

0.51

0.94

0.2

PS126F

5⁄8

1.50

0.51

1.02

0.2

PS126H

11⁄16

1.50

0.51

1.10

0.3

PS126I

3⁄4

1.50

0.71

1.10

0.3

PS126K

13⁄16

1.50

0.71

1.18

0.4

PS126L

7⁄8

1.50

0.71

1.26

0.4

PS126M

15⁄16

1.25

0.89

1.38

0.4

PS126N

1.25

0.96

1.48

0.5

PS126O

11⁄16

1.25

0.96

1.53

0.5

PS126P

11⁄8

1.25

0.96

1.61

0.7

PS126Q

13⁄16

1.25

0.96

1.65

0.7

PS126R

11⁄4

1.25

0.96

1.73

0.8

PS126S

15⁄16

1.75

0.96

1.87

0.9

PS126T

13⁄8

1.97

1.06

1.85

1.0

PS126U

17⁄16

1.97

1.06

1.98

1.1

PS126V

11⁄2

1.97

1.06

2.13

1.3

1⁄2"

DRIVE DEEP SAE IMPACT SOCKETS Size (in.)

Length (in.)

Bolt Clearance (in.)

Max. Outside Diameter (in.)

Shpg. Wt. (lbs.)

PSD126A

3⁄8

3.25

0.98

0.94

0.4

PSD126B

7⁄16

3.25

0.98

0.94

0.4

PSD126C

1⁄2

3.25

0.98

0.94

0.4

PSD126D

9⁄16

3.25

0.98

0.94

0.4

PSD126F

5⁄8

3.25

1.18

1.02

0.4

PSD126H

11⁄16

3.25

1.18

1.10

0.4

PSD126I

3⁄4

3.25

1.18

1.10

0.5

PSD126K

13⁄16

3.25

1.38

1.18

0.6

PSD126L

7⁄8

3.50

1.38

1.26

0.8

15⁄16

3.50

1.38

0.8

PSD126N

3.50

1.38

1.48

0.9

PSD126O

11⁄16

3.50

1.38

1.53

0.9

PSD126P

11⁄8

3.50

1.38

1.61

1.2

PSD126Q

13⁄16

3.50

1.38

1.65

1.4

PSD126R

11⁄4

3.50

1.38

1.73

1.4

PSD126S

15⁄16

3.50

1.38

1.87

1.5

PSD126T

13⁄8

3.50

1.38

1.89

1.6

PSD126U

17⁄16

3.50

1.38

1.97

1.8

PSD126V

11⁄2

3.50

1.38

2.12

1.9

Part No.

PSD126M

www.westwardtools.ca

W089-10.qxp

2/8/10

3:20 PM

Page 89

1/2" DRIVE IMPACT SOCKETS Part No.

Size (mm)

Length (mm)

Bolt Clearance Max. Outside Shpg. Wt. (mm) Diameter (mm) (lbs.)

PM1209

38.1

11.0

25.2

0.2

PM1210

38.1

12.0

25.2

0.2

PM1211

38.1

12.0

25.2

0.2

PM1212

38.1

12.0

25.2

0.2

PM1213

38.1

12.5

25.2

0.2

PM1214

38.1

13.0

25.2

0.3

PM1215

38.1

13.0

30.2

0.3

PM1216

38.1

13.0

30.2

0.4

PM1217

38.1

13.0

30.2

0.4

PM1218

38.1

17.0

30.2

0.4

PM1219

38.1

18.0

30.2

0.5

PM1220

38.1

18.0

30.2

0.5

PM1221

38.1

18.0

30.2

0.7

PM1222

38.1

18.0

32.0

0.7

PM1223

44.5

21.5

33.0

0.8

PM1224

44.5

21.5

35.0

0.9

PM1226

44.5

24.5

38.0

1.0

PM1228

44.5

24.5

41.0

1.1

PM1230

44.5

24.5

42.0

1.3

PM1236

50.0

27.0

50.0

1.4

Part No.

Size (mm)

Length (mm)

DRIVE METRIC REGULAR LENGTH IMPACT SOCKETS

Bolt Clearance Max. Outside Shpg. Wt. (mm) Diameter (mm) (lbs.)

PMD1209

82.6

25.2

0.5

PMD1210

82.6

25.2

0.5

PMD1211

82.6

25.2

0.5

PMD1212

82.6

25.2

0.5

PMD1213

82.6

25.2

0.4

PMD1214

82.6

25.2

0.5

PMD1215

82.6

30.2

0.7

PMD1216

82.6

30.2

0.7

PMD1217

82.6

30.2

0.6

PMD1218

82.6

30.2

0.6

PMD1219

82.6

30.2

0.6

PMD1220

82.6

30.2

0.6

PMD1221

82.6

30.2

0.6

PMD1222

88.9

32.0

0.7

PMD1223

88.9

33.0

0.7

PMD1224

88.9

35.0

0.8

PMD1226

88.9

38.0

0.9

PMD1227

88.9

38.9

1.0

PMD1228

88.9

41.0

1.1

PMD1230

88.9

42.0

1.1

PMD1232

88.9

44.0

1.2

PMD1236

88.9

50.0

1.3

www.westwardtools.ca

1⁄2"

DRIVE METRIC DEEP IMPACT SOCKETS

W090-10.qxp

2/8/10

3:21 PM

Page 90

1/2" DRIVE IMPACT SOCKETS 1⁄2"

DRIVE SAE UNIVERSAL IMPACT SOCKETS

Part No.

Size (in.)

PSU12C

1⁄2

2.56

PSU12D

9⁄16

2.56

PSU12F

5⁄8

PSU12H

11⁄16

PSU12I

3⁄4

2.56

0.47

1.19

0.5

PSU12K

13⁄16

2.56

0.59

1.19

0.6

PSU12L

7⁄8

2.56

0.59

1.26

0.6

1⁄2"

Length Bolt Clearance (in.) (in.)

Max. Outside Diameter (in.)

Shpg. Wt. (lbs.)

0.39

0.92

0.3

0.39

0.92

0.3

2.56

0.39

0.92

0.3

2.56

0.47

1.19

0.5

DRIVE METRIC UNIVERSAL IMPACT SOCKETS

Part No.

Size (mm)

Length Bolt Clearance Max. Outside Shpg. Wt. (mm) (mm) Diameter (mm) (lbs.)

PMU1213

23.3

0.3

PMU1214

23.3

0.3

PMU1215

23.3

0.3

PMU1216

23.3

0.3

PMU1217

69.9

30.3

0.5

PMU1218

69.9

30.3

0.5

PMU1219

69.9

30.3

0.5

PMU1220

74.9

30.3

0.6

PMU1221

74.9

30.3

0.6

PMU1222

74.9

32.0

0.6

PMU1223

74.9

33.0

0.6

1⁄2"

DRIVE IMPACT FLIP SOCKET

Part No. PSF1721M

Size

Shpg. Wt. (lbs.)

17 mm x 21 mm

0.6

PSF2426

3⁄4"

13⁄16"

0.7

2 PIECE FLIP SOCKET SETS Part No.

Description

PSFK2

3⁄4"

PSFK2M

17 mm x 21 mm Flip Socket and Extension

1⁄2"

Shpg. Wt. (lbs.)

Flip Socket and Extension

1.0 1.0

DRIVE FRONT WHEEL DRIVE AXLE NUT SOCKET

Part No.

13⁄16"

Size (mm)

Shpg. Wt. (lbs.)

PMA1230

1.3

A54

1.3

A55

1.4

PMA1236

1.4

www.westwardtools.ca

W091-10.qxp

2/8/10

3:22 PM

Page 91

3/4" DRIVE IMPACT SOCKETS 17 PIECE 3⁄4" DRIVE SAE IMPACT SOCKET SET • Contains impact sockets: 7⁄8", 15⁄16", 1", 11⁄16", 11⁄8", 13⁄16", 11⁄4", 15⁄16", 13⁄8", 17⁄16", 11⁄2", 15⁄8", 13⁄4", 113⁄16", 17⁄8", 2". • Includes a metal case.

Part No.

Description

Shpg. Wt. (lbs.)

PSK3417

17 Piece Set

21.0

9 PIECE 3⁄4" DRIVE SAE IMPACT SOCKET SET • Includes impact sockets: 7⁄8", 11⁄2". • Includes a metal case.

15⁄16",

Part No.

Description

PSK3409

9 Piece Set

11⁄16", 11⁄8", 11⁄4", 15⁄16", 17⁄16",

Shpg. Wt. (lbs.) 8.0

9 PIECE 3⁄4" DRIVE DEEP SAE IMPACT SOCKET SET • Contains deep 6 point sockets 1", 11⁄16", 11⁄8", 13⁄16", 11⁄4", 13⁄8", 17⁄16", and 11⁄2". • Includes a steel case.

Part No.

Description

PSDK3409

9 Piece Set

Shpg. Wt. (lbs.) 14.0

10 PIECE 3⁄4" DRIVE DEEP METRIC IMPACT SOCKET SET • Contains deep 6 point sockets, 27 mm, 29 mm, 30 mm, 32 mm, 33 mm, 35 mm, 36 mm, 38 mm, 41 mm. • Includes a metal case.

Part No.

Description

Shpg. Wt. (lbs.)

PMDK3410

10 Piece Set

15.1

www.westwardtools.ca

W092-10.qxp

2/8/10

3:23 PM

Page 92

3/4" DRIVE IMPACT SOCKETS 3⁄4"

Part No.

Description

Shpg. Wt. (lbs.)

PSA3405

Extension 4"

1.5

PSA3407

Extension 7"

1.8

PSA3406

Extension 10"

2.6

PSA3408

Extension 13"

3.2

3⁄4"

DRIVE IMPACT EXTENSIONS

DRIVE SAE REGULAR LENGTH IMPACT SOCKETS

Part No.

Size (in.)

Length (in.)

Max. Outside Diameter (in.)

Bolt Clearance Shpg. Wt. (in.) (lbs.)

PS346H

11⁄16

2.01

1.63

0.55

0.7

PS346I

3⁄4

2.01

1.63

0.55

0.7

PS346K

13⁄16

2.01

1.63

0.55

0.8

PS346L

7⁄8

2.01

1.63

0.55

0.8

PS346M

15⁄16

2.01

1.63

0.65

0.8

PS346N

2.09

1.63

0.65

0.8

PS346O

11⁄16

2.09

1.73

0.79

0.8

PS346P

11⁄8

2.09

1.73

0.79

0.9

PS346Q

13⁄16

2.09

1.81

0.79

1.0

PS346R

11⁄4

2.24

1.91

0.83

1.1

PS346S

15⁄16

2.24

2.07

0.83

1.1

PS346T

13⁄8

2.24

2.07

0.83

1.4

PS346U

17⁄16

2.24

2.11

0.87

1.5

PS346V

11⁄2

2.24

2.20

0.87

1.6

PS346W

19⁄16

2.28

2.31

0.87

1.8

PS346X

15⁄8

2.28

2.36

0.98

1.8

PS346Y

111⁄16

2.44

2.50

0.98

1.8

PS346Z

13⁄4

2.44

2.60

0.98

1.8

PS346ZA

113⁄16

2.44

2.60

0.98

2.0

PS346ZB

17⁄8

2.68

1.18

2.2

PS346ZC

2.68

2.80

1.18

2.4

PS346ZD

21⁄16

2.79

2.87

1.26

2.4

PS346ZF

21⁄8

2.79

2.97

1.26

2.4

PS346ZG

23⁄16

2.79

3.05

1.26

2.4

PS346ZH

21⁄4

2.87

3.15

1.34

2.4

PS346ZI

25⁄16

2.87

3.19

1.34

2.4

PS346ZK

23⁄8

2.87

3.27

1.34

2.4

PS346ZL

27⁄16

2.95

3.33

1.42

2.4

PS346ZM

21⁄2

2.95

3.41

1.42

2.4

www.westwardtools.ca

W093-10.qxp

2/8/10

3:24 PM

Page 93

3/4" DRIVE IMPACT SOCKETS

3⁄4"

DRIVE IMPACT UNIVERSAL JOINT

Part No.

Description

Shpg. Wt. (lbs.)

PSA3402

Universal Joint

1.3

3⁄4"

DRIVE IMPACT ADAPTERS

Part No.

Description

PSA3410

Adapter 3⁄4" F x 1" M

0.9

PSA3412

Adapter 3⁄4" F x 1⁄2" M

0.7

3⁄4"

Shpg. Wt. (lbs.)

DRIVE SAE DEEP IMPACT SOCKETS

Part No.

Size Length (in.) (in.)

Max. Outside Diameter (in.)

Bolt Clearance (in.)

Shpg. Wt. (lbs.)

PSD346I

3⁄4

3.54

1.65

1.02

1.3

PSD346K

13⁄16

3.54

1.65

1.02

1.4

PSD346L

7⁄8

3.54

1.65

1.02

1.4

15⁄16

3.54

1.65

1.02

1.4

PSD346N

3.54

1.65

1.02

1.4

PSD346O

11⁄16

3.54

1.73

1.10

1.5

PSD346P

11⁄8

3.54

1.73

1.10

1.5

PSD346Q

13⁄16

3.54

1.81

1.10

1.6

PSD346R

11⁄4

3.54

1.91

1.10

1.9

PSD346S

15⁄16

3.54

2.07

1.10

1.9

PSD346T

13⁄8

3.54

2.07

1.18

2.1

PSD346U

17⁄16

3.54

2.11

1.18

2.3

PSD346V

11⁄2

3.54

2.20

1.34

2.4

PSD346X

15⁄8

3.54

2.36

1.34

2.8

PSD346Y

111⁄16

3.54

2.36

1.34

2.1

PSD346Z

13⁄4

3.54

2.44

1.34

2.2

PSD346ZA

113⁄16

3.54

2.52

1.34

2.3

PSD346ZB

17⁄8

3.54

2.62

1.34

2.5

PSD346M

PSD346ZC

3.54

2.76

1.42

2.6

PSD346ZD

21⁄16

3.94

2.87

1.57

2.6

PSD346ZF

21⁄8

3.94

2.97

1.57

2.6

PSD346ZG

23⁄16

3.94

3.05

1.57

2.6

PSD346ZH

21⁄4

3.94

3.15

1.73

2.6

PSD346ZI

25⁄16

4.13

3.19

1.73

2.6

PSD346ZK

23⁄8

4.13

3.27

1.73

2.6

PSD346ZL

27⁄16

4.13

3.33

1.73

2.6

PSD346ZM

21⁄2

4.13

3.41

1.73

2.6

www.westwardtools.ca

W094-10.qxp

2/8/10

3:24 PM

Page 94

3/4" DRIVE IMPACT SOCKETS Part No.

3⁄4"

DRIVE METRIC REGULAR LENGTH IMPACT SOCKETS

3⁄4"

DRIVE METRIC DEEP IMPACT SOCKETS

Size Length Max. Outside (mm) (mm) Diameter (mm)

Bolt Clearance (mm)

Shpg. Wt. (lbs.)

PM3417

51.0

44.0

0.7

PM3418

51.0

44.0

0.7

PM3419

51.0

44.0

0.8

PM3420

51.0

44.0

0.8

PM3421

51.0

44.0

0.8

PM3422

51.0

44.0

0.8

PM3423

51.0

44.0

0.8

PM3424

51.0

44.0

0.9

PM3426

53.0

44.0

1.0

PM3427

53.0

44.0

1.1

PM3429

53.0

45.0

1.3

PM3430

53.0

46.0

1.4

PM3432

57.0

48.5

1.5

PM3433

57.0

50.0

1.6

PM3435

57.0

52.5

1.8

PM3436

57.0

53.5

1.8

PM3438

57.0

56.0

1.8

PM3441

58.0

60.0

1.8

PM3446

62.0

66.0

2.0

PM3450

68.0

71.0

1.9

PM3454

72.0

76.0

2.3

PM3458

72.0

81.0

2.5

PM3460

72.0

83.5

2.7

PMD3421

90.0

44.0

1.3

PMD3422

90.0

44.0

1.4

PMD3423

90.0

44.0

1.4

PMD3424

90.0

44.0

1.4

PMD3426

90.0

44.0

1.4

PMD3427

90.0

44.0

1.5

PMD3429

90.0

45.0

1.5

PMD3430

90.0

46.0

1.6

PMD3432

90.0

48.5

1.9

PMD3433

90.0

50.0

2.0

PMD3434

90.0

51.0

2.1

PMD3435

90.0

52.5

2.3

PMD3436

90.0

53.5

2.3

PMD3438

90.0

56.0

2.4

PMD3441

90.0

60.0

2.6

PMD3442

90.0

61.0

2.6

PMD3443

90.0

62.5

2.6

PMD3444

90.0

64.0

2.6

PMD3446

90.0

66.0

2.6

PMD3450

90.0

71.0

2.6

PMD3455

100.0

77.5

2.6

PMD3460

105.0

83.8

2.6

www.westwardtools.ca

W095-10.qxp

2/8/10

3:25 PM

Page 95

1" DRIVE IMPACT SOCKETS 33 PIECE 1" DRIVE SAE IMPACT SOCKET SET • Contains 6 point standard and deep sockets, 11⁄4", 15⁄16", 13⁄8", 11⁄2", 15⁄8", 13⁄4", 17⁄8", 2", 21⁄8", 21⁄4", 23⁄8", 21⁄2". • Thin wall sockets, 11⁄16", 11⁄8", 11⁄4", budd socket 13⁄16", 2 extensions, adapter and a U-joint. • Includes metal box.

Part No.

Description

Shpg. Wt. (lbs.)

PSK136

33 Piece Set

99.0

28 PIECE 1" DRIVE SAE IMPACT SOCKET SET • Contains 6 point sockets, 7⁄8", 15⁄16", 1", 11⁄16", 11⁄8", 13⁄16", 11⁄4", 15⁄16", 13⁄8", 11⁄2", 15⁄8", 13⁄4", 17⁄8", 2", 21⁄8", 21⁄4", 23⁄8", 21⁄2", 29⁄16", 25⁄8", 23⁄4", 27⁄8", 3", 31⁄8", 31⁄4", 31⁄2". • Includes metal box.

Part No. Description PSK128

28 Piece Set

Shpg. Wt. (lbs.) 102.0

7 PIECE 1" DRIVE SAE IMPACT SOCKET SET • Contains impact sockets: 11⁄8", 11⁄4", 15⁄16", 11⁄2", 15⁄8", 17⁄8". • Includes a metal case.

Part No. Description PSK107

7 Piece Set

Shpg. Wt. (lbs.) 12.0

1" DRIVE IMPACT UNIVERSAL JOINT Part No.

Description

Shpg. Wt. (lbs.)

PSA102

Universal Joint

2.8

1" DRIVE IMPACT ADAPTERS Part No.

Description

Shpg. Wt. (lbs.)

PSA1015 Adapter 1" F x 11⁄2" M

2.1

PSA1034 Adapter 1" F x 3⁄4" M

1.8

www.westwardtools.ca

W096-10.qxp

2/8/10

3:26 PM

Page 96

1" DRIVE IMPACT SOCKETS 1" DRIVE IMPACT EXTENSIONS Part No.

Description

Shpg. Wt. (lbs.)

PSA1005

Extension 4"

1.6

PSA107

Extension 7"

3.5

PSA1006

Extension 10"

4.7

PSA1008

Extension 13"

6.9

1" DRIVE SAE REGULAR LENGTH IMPACT SOCKETS Part No. PS12L

Max. Outside Diameter (in.)

Shpg. Wt. (lbs.)

7⁄8

2.28

0.67

2.13

1.1

15⁄16

2.28

0.67

2.13

1.4

PS12N

2.36

0.75

2.13

1.5

PS12O

11⁄16

2.36

0.75

2.13

1.5

PS12P

11⁄8

2.13

0.87

2.13

1.6

PS12Q

13⁄16

2.13

0.87

2.13

1.6

PS12R

11⁄4

2.13

0.87

2.13

1.6

PS12S

15⁄16

2.13

0.87

2.13

1.7

PS12T

13⁄8

2.60

0.87

2.17

1.9

PS12U

17⁄16

2.60

0.87

2.22

1.9

PS12V

11⁄2

2.60

0.87

2.32

2.0

PS12X

15⁄8

2.68

0.94

2.46

2.0

PS12Y

111⁄16

2.76

1.02

2.56

2.1

PS12Z

13⁄4

2.76

1.02

2.66

2.2

PS12ZA

113⁄16

2.83

1.02

2.72

2.4

PS12ZB

17⁄8

2.83

1.02

2.76

2.6

PS12ZC

2.99

1.10

2.91

3.2

PS12ZD

21⁄16

3.15

1.26

3.01

3.3

PS12ZF

21⁄8

3.15

1.26

3.11

3.7

PS12ZG

23⁄16

3.31

1.42

3.15

4.0

PS12ZH

21⁄4

3.31

1.42

3.25

4.0

PS12ZI

25⁄16

3.31

1.42

3.31

4.4

PS12ZK

23⁄8

3.46

1.50

3.41

4.8

PS12ZL

27⁄16

2.28

0.67

3.50

4.9

PS12ZM

21⁄2

3.46

1.50

3.60

5.4

PS12ZN

29⁄16

3.62

1.50

3.64

6.1

PS12ZO

25⁄8

3.62

1.50

3.74

6.3

PS12ZP

23⁄4

3.78

1.57

3.90

6.3

PS12ZQ

27⁄8

3.78

1.65

4.04

6.4

PS12ZR

3.94

1.77

4.19

7.0

PS12ZS

31⁄8

4.17

1.77

4.37

7.7

PS12ZT

31⁄4

4.17

1.77

4.53

8.2

PS12ZU

33⁄8

4.17

1.97

4.69

8.5

PS12ZV

31⁄2

4.88

1.97

4.88

9.2

PS12M

Size Length Bolt Clearance (in.) (in.) (in.)

www.westwardtools.ca

W097-10.qxp

2/8/10

3:27 PM

Page 97

1" DRIVE IMPACT SOCKETS 1" DRIVE METRIC REGULAR LENGTH IMPACT SOCKETS Part No.

Size (mm)

Length Bolt Clearance Max. Outside Shpg. Wt. (mm) (mm) Diameter (mm) (lbs.)

PM1027

60.0

19.0

1.6

PM1029

64.0

22.0

1.6

PM1030

64.0

22.0

1.7

PM1032

64.0

22.0

1.9

PM1033

64.0

22.0

1.9

PM1035

66.0

22.0

2.0

PM1036

66.0

22.0

2.0

PM1038

66.0

22.0

2.1

PM1041

68.0

24.0

2.2

PM1046

72.0

26.0

2.4

PM1050

76.0

28.0

2.6

PM1054

80.0

79.0

3.2

PM1055

84.0

80.0

3.7

PM1058

84.0

4.0

PM1060

88.0

86.5

4.0

PM1063

88.0

90.0

4.4

PM1065

92.0

92.5

4.8

PM1067

92.0

95.0

4.9

PM1070

96.0

99.0

5.4

PM1080

102.0

111.5

6.1

1" DRIVE DEEP METRIC IMPACT SOCKETS

Part No.

Size (mm)

Length Bolt Clearance Max. Outside Shpg. Wt. (mm) (mm) Diameter (mm) (lbs.)

PMD1026

108.0

30.0

54.0

2.5

PMD1027

108.0

30.0

54.0

2.5

PMD1029

108.0

30.0

54.0

2.6

PMD1030

108.0

30.0

54.0

2.7

PMD1032

108.0

30.0

54.0

2.7

PMD1033

108.0

35.0

54.0

2.8

PMD1035

108.0

35.0

55.0

2.8

PMD1036

108.0

35.0

56.5

2.9

PMD1038

108.0

35.0

59.0

3.0

PMD1041

108.0

38.0

62.5

3.3

PMD1055

108.0

45.0

80.0

4.3

PMD1060

108.0

48.0

86.5

4.8

PMD1065

108.0

50.0

92.5

5.3

PMD1070

108.0

50.0

99.0

5.6

PMD1075

108.0

55.0

105.0

6.2

PMD1080

108.0

55.0

111.5

7.1

PMD1085

108.0

55.0

117.5

8.2

PMD1090

108.0

55.0

124.0

9.3

www.westwardtools.ca

W098-10.qxp

2/8/10

3:28 PM

Page 98

1" & 11⁄2" IMPACT SOCKETS 1" DRIVE SAE DEEP IMPACT SOCKETS Part No. PSD12M PSD12N PSD12O PSD12P PSD12Q PSD12R PSD12S PSD12T PSD12U PSD12V PSD12X PSD12Y PSD12Z PSD12ZA PSD12ZB PSD12ZC PSD12ZF PSD12ZH PSD12ZK PSD12ZM PSD12ZN PSD12ZO PSD12ZP PSD12ZPA PSD12ZQ PSD12ZQA PSD12ZR PSD12ZS PSD12ZT PSD12ZU

Size (in.)

Length Bolt Clearance Max. Outside (in.) (in.) Diameter (in.)

Shpg. Wt. (lbs.)

15⁄16

4.25

1.18

2.13

2.3

4.25

1.18

2.13

2.3

11⁄16

4.25

1.18

2.13

2.5

11⁄8

4.25

1.18

2.13

2.6

13⁄16

4.25

1.18

2.13

2.6

11⁄4

4.25

1.18

2.13

2.6

15⁄16

4.25

1.38

2.13

2.8

13⁄8

4.25

1.38

2.17

2.8

17⁄16

4.25

1.38

2.22

2.9

11⁄2

4.25

1.38

2.32

3.2

15⁄8

4.25

1.5

2.46

3.4

111⁄16

4.25

1.5

2.56

3.5

13⁄4

4.25

1.65

2.66

3.6

113⁄16

4.25

1.65

2.72

3.7

17⁄8

4.25

1.65

2.76

3.9

4.25

1.65

2.91

4.2

21⁄8

4.25

1.77

3.11

4.4

21⁄4

4.25

1.89

3.25

4.4

23⁄8

4.25

1.89

3.40

4.7

21⁄2

4.72

1.97

3.60

5.2

29⁄16

4.72

1.97

3.64

5.3

25⁄8

4.72

1.97

3.74

5.5

23⁄4

4.92

1.97

3.90

5.6

213⁄16

4.92

2.17

4.00

5.7

27⁄8

4.92

2.17

4.04

5.8

215⁄16

4.92

2.17

4.11

6.2

4.92

2.17

4.19

6.3

31⁄8

4.92

2.17

4.39

7.1

31⁄4

4.92

—

7.1

33⁄8

4.92

—

7.1

11⁄2" DRIVE METRIC DEEP SOCKETS Part No.

Size (mm)

Length (mm)

Shpg. Wt. (lbs.)

PM1555

6.2

PM1560

6.4

PM1565

100

7.5

PM1570

105

8.2

PM1575

105

8.8

PM1580

110

9.5

PM1585

110

10.2

PM1590

112

11.0

PM1595

112

13.7

PM15100

100

115

15.4

PM15105

105

120

16.5

PM15115

115

128

20.5

www.westwardtools.ca

W099-10.qxp

2/12/10

1:38 PM

Page 99

WRENCHES

Fully Polished Combination Wrench Sets . . . . . . . . . . . . . . . . . . . . . . . 100 Raised Panel Combination Wrench Sets . . . . . . . . . . . . . . . . . . . . . . . 101 Fully Polished Wrenches . . . . . . . 103 Raised Panel Wrenches . . . . . 104-105 Ratcheting Wrenches & Sets. . . 107-112 Box End Ratcheting Wrenches . . . . . 113 Flare Nut Wrenches & Sets . . 118-119 Adjustable Wrenches. . . . . . . 120-121 Pipe Wrenches . . . . . . . . . . . 122-124 Torque Wrenches . . . . . . . . . 125-127 Electronic Torque Wrenches . . . . . 128 Torque Multipliers . . . . . . . . . . . . 128

W100-10.qxp

2/8/10

3:43 PM

Page 100

WRENCHES FULLY POLISHED 16 PIECE SAE COMBINATION WRENCH SET WITH “WALL DRIVE” BOX END • Contains: 1⁄4", 5⁄16", 3⁄8", 7⁄16", 1⁄2", 9⁄16", 5⁄8", 11⁄8", 11⁄4". • Chrome vanadium steel. • Includes heavy-duty terylene pouch.

Part No.

Description

CPK16

16 Piece Wrench Set

11⁄16", 3⁄4", 13⁄16", 7⁄8", 15⁄16",

1", 11⁄16",

Head Angle (degrees)

Shpg. Wt. (lbs.)

10.0

FULLY POLISHED 14 PIECE SAE COMBINATION WRENCH SET WITH “WALL DRIVE” BOX END • Contains: 3⁄8", 7⁄16", 1⁄2", 9⁄16", 5⁄8", 11⁄16", 3⁄4", • Chrome vanadium steel. • Includes heavy-duty terylene pouch.

Part No.

Description

CPK14

14 Piece Wrench Set

13⁄16", 7⁄8", 15⁄16",

1", 11⁄16", 11⁄8", 11⁄4".

Head Angle (degrees)

Shpg. Wt. (lbs.)

9.8

FULLY POLISHED 11 PIECE SAE COMBINATION WRENCH SET WITH “WALL DRIVE” BOX END • Contains: 3⁄8", 7⁄16", 1⁄2", 9⁄16", 5⁄8", 11⁄16", 3⁄4", • Chrome vanadium steel. • Includes heavy-duty terylene pouch.

Part No.

Description

CPK11

11 Piece Wrench Set

13⁄16", 7⁄8", 15⁄16",

1".

Head Angle (degrees)

Shpg. Wt. (lbs.)

4.0

FULLY POLISHED 21 PIECE METRIC COMBINATION WRENCH SET WITH “WALL DRIVE” BOX • Contains: 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm, 20 mm, 21 mm, 22 mm, 23 mm, 24 mm, 25 mm, 27 mm, 30 mm, 32 mm. • Chrome vanadium steel. • Includes heavy-duty terylene pouch.

100

Part No.

Description

CPK21M

21 Piece Wrench Set

Head Angle (degrees) Shpg. Wt. (lbs.) 15

10.2

www.westwardtools.ca

W101-10.qxp

2/8/10

3:44 PM

Page 101

WRENCHES FULLY POLISHED 16 PIECE METRIC COMBINATION WRENCH SET WITH “WALL DRIVE” BOX END • Contains: 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm, 20 mm, 21 mm, 22 mm, 24 mm. • Chrome vanadium steel. • Includes heavy-duty terylene pouch.

Part No.

Description

CPK16M

16 Piece Wrench Set

Head Angle (degrees)

Shpg. Wt. (lbs.)

7.0

11 PIECE RAISED PANEL SAE COMBINATION WRENCH SET • Contains: 3⁄8", 7⁄16", 1⁄2", 9⁄16", 5⁄8", • Chrome vanadium steel. • Includes vinyl pouch.

11⁄16", 3⁄4", 13⁄16", 7⁄8", 15⁄16",

Part No. Description CWK11R 11 Piece Wrench Set

1".

Head Angle (degrees)

Shpg. Wt. (lbs.)

6.0

14 PIECE RAISED PANEL SAE COMBINATION WRENCH SET • Contains: 3⁄8", 7⁄16", 1⁄2", 9⁄16", 5⁄8", 11⁄8", 11⁄4". • Chrome vanadium steel. • Includes vinyl pouch.

Part No. Description

11⁄16", 3⁄4", 13⁄16", 7⁄8", 15⁄16",

1", 11⁄16",

Head Angle (degrees)

Shpg. Wt. (lbs.)

10.0

CWK14R 14 Piece Wrench Set

8 PIECE JUMBO RAISED PANEL SAE COMBINATION WRENCH SET • Contains: 15⁄16", 13⁄8", 17⁄16", 11⁄2", 15⁄8", 13⁄4", 17⁄8", 2". • Chrome vanadium steel.

Part No. Description CWK8

8 Piece Wrench Set

www.westwardtools.ca

Head Angle (degrees)

Shpg. Wt. (lbs.)

36.0

101

W102-10.qxp

2/8/10

3:45 PM

Page 102

WRENCHES 16 PIECE RAISED PANEL SAE DROP FORGED COMBINATION WRENCH SET • Contains: 1⁄4", 5⁄16", 3⁄8", 7⁄16", 1⁄2", 9⁄16", 5⁄8", 1", 11⁄16", 11⁄8", 11⁄4". • Drop forged alloy steel. • Includes a vinyl pouch.

Part No. Description CRK16

16 Piece Wrench Set

11⁄16", 3⁄4", 13⁄16", 7⁄8", 15⁄16",

Head Angle (degrees)

Shpg. Wt. (lbs.)

10.0

18 PIECE RAISED PANEL METRIC DROP FORGED COMBINATION WRENCH SET • Contains: 7 mm, 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm, 20 mm, 21 mm, 22 mm, 23 mm, 24 mm. • Drop forged alloy steel. • Includes a vinyl pouch.

Part No. Description CRK18M 18 Piece Wrench Set

Head Angle (degrees)

Shpg. Wt. (lbs.)

7.3

16 PIECE RAISED PANEL METRIC COMBINATION WRENCH SET • Contains: 7 mm, 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm, 21 mm, 22 mm, 24 mm. • Chrome vanadium steel. • Includes vinyl pouch.

Part No.

Description

CMK16R

16 Piece Wrench Set

Head Angle (degrees)

Shpg. Wt. (lbs.)

7.3

26 PIECE RAISED PANEL METRIC COMBINATION WRENCH SET • Contains: 6 mm, 7 mm, 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm, 20 mm, 21 mm, 22 mm, 23 mm, 24 mm, 25 mm, 26 mm, 27 mm, 28 mm, 29 mm, 30 mm, 32 mm. • Chrome vanadium steel. • Includes vinyl pouch.

102

Part No.

Description

CMK26

26 Piece Wrench Set

Head Angle (degrees)

Shpg. Wt. (lbs.)

12.0

www.westwardtools.ca

W103-10.qxp

2/8/10

3:46 PM

Page 103

WRENCHES Size (in.)

Length (in.)

Head Angle (degrees)

Shpg. Wt. (lbs.)

CP08

1⁄4

5.00

0.1

CP10

5⁄16

5.50

0.1

CP12

3⁄8

6.24

0.1

CP14

7⁄16

6.49

0.2

CP16

1⁄2

6.98

0.2

CP18

9⁄16

7.48

0.3

CP20

5⁄8

8.20

0.3

CP22

11⁄16

8.86

0.4

CP24

3⁄4

9.79

0.5

CP26

13⁄16

10.67

0.7

CP28

7⁄8

11.54

0.7

CP30

15⁄16

12.42

0.9

CP32

13.19

1.1

CP34

11⁄16

14.14

1.3

CP36

11⁄8

15.85

1.4

CP40

11⁄4

16.76

1.8

CP42

15⁄16

18.50

2.4

CP44

13⁄8

18.50

2.4

CP48

11⁄2

20.08

2.6

Size (mm)

Length (in.)

Head Angle (degrees)

Shpg. Wt. (lbs.)

CP07M

5.24

0.1

CP08M

5.50

0.1

CP09M

5.87

0.1

CP10M

6.24

0.1

CP11M

6.49

0.1

CP12M

6.74

0.2

CP13M

6.98

0.2

CP14M

7.48

0.3

CP15M

7.84

0.3

CP16M

8.20

0.4

CP17M

8.86

0.4

CP18M

9.33

0.4

CP19M

9.79

0.5

CP20M

10.39

0.5

CP21M

10.67

0.7

CP22M

11.54

0.7

CP23M

11.97

0.9

CP24M

12.42

0.9

CP25M

13.19

1.0

CP27M

14.13

1.3

CP30M

16.34

1.3

CP32M

16.76

1.6

Part No.

www.westwardtools.ca

FULLY POLISHED SAE COMBINATION WRENCHES • Wall drive. • Features box end design that grips fastener on flat side, not corners, reducing potential for damage and increasing applicable torque. • Nickel chrome plated for rust resistance and extended life. • Chrome vanadium steel.

FULLY POLISHED METRIC COMBINATION WRENCHES • Wall drive. • Features box end design that grips fastener on flat side, not corners, reducing potential for damage and increasing applicable torque. • Nickel chrome plated for rust resistance and extended life. • Chrome vanadium steel.

103

W104-10.qxp

2/8/10

3:47 PM

Page 104

WRENCHES Size (in.)

Length (in.)

Head Angle (degrees)

Shpg. Wt. (lbs.)

CW197

11⁄32

4.54

0.1

CW198

1⁄4

3.69

0.1

CW199

5⁄16

4.07

0.1

CW200

3⁄8

4.54

0.1

CW201

7⁄16

5.14

0.2

CW202

1⁄2

5.82

0.2

CW203

9⁄16

6.60

0.3

CW204

5⁄8

7.70

0.3

CW205

11⁄16

8.17

0.4

CW206

3⁄4

9.07

0.5

CW207

13⁄16

10.28

0.7

CW208

7⁄8

10.94

0.7

CW209

15⁄16

12.08

1.0

Part No.

SAE RAISED PANEL COMBINATION WRENCHES

CW210

13.07

1.0

CW211

11⁄16

14.16

1.3

CW212

11⁄8

15.01

1.6

CW213

11⁄4

16.50

1.8

CW301

15⁄16

18.15

2.3

CW302

13⁄8

18.15

2.3

CW303

17⁄16

19.13

2.6

CW304

11⁄2

19.13

2.6

CW305

15⁄8

21.26

3.1

CW306

111⁄16

21.26

3.3

CW307

13⁄4

24.06

5.0

CW308

113⁄16

24.06

6.1

CW309

17⁄8

24.06

6.2

CW310

24.06

6.2

CW311

21⁄8

26.18

9.0

CW312

21⁄4

26.18

9.3

CW313

23⁄8

29.92

13.5

CW314

21⁄2

29.92

13.9

Size (mm)

Length (in.)

Head Angle (degrees)

Shpg. Wt. (lbs.)

CM06

3.65

0.1

CM07

3.84

0.1

CM08

4.07

0.1

CM09

4.54

0.1

CM10

4.85

0.1

CM11

5.14

0.2

CM12

5.41

0.2

CM13

5.82

0.2

CM14

6.60

0.3

CM15

7.43

0.3

CM16

7.70

0.4

Part No.

METRIC RAISED PANEL COMBINATION WRENCHES

104

www.westwardtools.ca

W105-10.qxp

2/8/10

3:47 PM

Page 105

WRENCHES Size (mm)

Length (in.)

Head Angle (degrees)

Shpg. Wt. (lbs.)

CM17

8.17

0.4

CM18

8.61

0.4

Part No.

CM19

9.07

0.5

CM20

9.07

0.5

CM21

10.28

0.7

CM22

10.94

0.7

CM23

12.08

0.9

CM24

12.08

0.9

CM25

13.10

1.0

CM26

12.72

1.1

CM27

14.16

1.3

CM28

15.00

1.3

CM29

15.00

1.3

CM30

15.01

1.3

CM32

16.50

1.8

METRIC RAISED PANEL COMBINATION WRENCHES Continued from page 104.

8 PIECE FULLY POLISHED SAE STUBBY WRENCH SET • Fully polished chrome vanadium steel for durability and rust resistance. • Complete with a convenient carry case. • Contains: 3⁄8", 7⁄16", 1⁄2", 9⁄16", 5⁄8", 11⁄16", 3⁄4".

Part No.

Description

CRK8S

8 Piece Stubby Wrench Set

Shpg. Wt. (lbs.) 1.5

8 PIECE FULLY POLISHED METRIC STUBBY WRENCH SET • Made from fully polished chrome vanadium steel for durability and rust resistance. • Includes a convenient carry case. • Contains: 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 17 mm, 19 mm.

Part No.

Description

CRK8SM

8 Piece Stubby Wrench Set

www.westwardtools.ca

Shpg. Wt. (lbs.) 1.5

105

W106-10.qxp

2/8/10

3:48 PM

Page 106

WRENCHES FULLY POLISHED SAE STUBBY WRENCHES Part No.

Size (in.)

Length (in.)

Shpg. Wt. (lbs.)

CR12S

3⁄8

3.70

0.1

CR14S

7⁄16

4.02

0.1

CR16S

1⁄2

4.21

0.2

CR18S

9⁄16

4.49

0.2

CR20S

5⁄8

4.80

0.2

CR22S

11⁄16

4.96

0.3

CR24S

3⁄4

5.43

0.3

FULLY POLISHED METRIC STUBBY WRENCHES Part No.

Size (mm)

Length (in.)

Shpg. Wt. (lbs.)

CR10SM CR11SM

3.70

0.1

4.02

0.1

CR12SM

4.13

0.2

CR13SM

4.21

0.2

CR14SM

4.49

0.2

CR17SM

4.96

0.3

CR19SM

5.43

0.3

6 PIECE RAISED PANEL SAE OPEN END WRENCH SET • Contains: 1⁄4" x 5⁄16", 3⁄8" x 7⁄16", 7⁄16" x 1⁄2", 1⁄2" x 9⁄16", 5⁄8" x 3⁄4", 3⁄4" x 7⁄8". • Chrome vanadium steel. • Includes vinyl pouch.

Part No.

Description

Shpg. Wt. (lbs.)

OEK06R

6 Piece Open End Wrench Set

3.5

OPEN END RAISED PANEL SAE WRENCHES Part No.

106

Size (in.)

Shpg. Wt. (lbs.)

OE100

1⁄4

x 5⁄16

0.1

OE101

3⁄8

7⁄16

0.1

OE102

7⁄16

1⁄2

0.1

OE103

1⁄2

x 9⁄16

0.2

OE104

9⁄16

5⁄8

0.2

OE106

5⁄8

x 3⁄4

0.3

OE108

3⁄4

x 7⁄8

0.5

www.westwardtools.ca

W107-10.qxp

2/8/10

3:49 PM

Page 107

WRENCHES

THE REVERSIBLE WRENCH’S FULLY HARDENED ALL-METAL CONSTRUCTION IS EXTREMELY STRONG. IT MEETS OR EXCEEDS DIN AND ANSI TORQUE SPECIFICATIONS FOR A STANDARD FIXED STYLE BOX END WRENCH.

15º

The small lever switches the motion between right and left without sacrificing the overall compact head design.

The 15º compact offset head design adds clearance to avoid obstacles.

When working with threaded rod or long bolts there is no need to remove the Reversible wrench from the fastener.

The ring stops the Reversible wrench at the top of the fastener, allowing the rod to pass through, but keeping the wrench securely in place.

The reversing action does not sacrifice the wrench’s small head design.

The compact size of the Reversible Ratcheting Wrench allows it to work where a ratchet and socket will not fit.

8 PIECE SAE REVERSIBLE RATCHETING WRENCH SET • Contains: 5⁄16", 3⁄8", 7⁄16", 1⁄2", 9⁄16", 5⁄8", 11⁄16", 3⁄4". • Fully polished chrome vanadium steel.

Part No.

Description

RCK8R

8 Piece Ratcheting Wrench Set

www.westwardtools.ca

Shpg. Wt. (lbs.) 4.3

107

W108-10.qxp

2/12/10

1:40 PM

Page 108

WRENCHES 10 PIECE METRIC REVERSIBLE RATCHETING WRENCH SET • Contains: 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm. • High polished chrome vanadium steel.

Part No.

Description

Shpg. Wt. (lbs.)

RCK10RM

10 Piece Ratcheting Wrench Set

4.0

REVERSIBLE SAE RATCHETING WRENCHES Part No.

Size (in.)

Length (in.)

Shpg. Wt. (lbs.)

RC10R

5⁄16

5.51

0.2

RC12R

3⁄8

6.26

0.3

RC14R

7⁄16

6.51

0.4

RC16R

1⁄2

7.01

0.4

RC18R

9⁄16

7.50

0.4

RC20R

5⁄8

8.20

0.5

RC22R

11⁄16

8.88

0.6

RC24R

3⁄4

9.76

0.8

REVERSIBLE METRIC RATCHETING WRENCHES

108

Part No.

Size (mm)

Length (in.)

Shpg. Wt. (lbs.)

RC10RM

6.26

0.2

RC11RM

6.51

0.3

RC12RM

6.76

0.3

RC13RM

7.01

0.4

RC14RM

7.50

0.4

RC15RM

7.85

0.4

RC16RM

8.20

0.5

RC17RM

8.88

0.5

RC18RM

9.31

0.6

RC19RM

9.76

0.7

www.westwardtools.ca

W109-10.qxp

2/8/10

3:51 PM

Page 109

WRENCHES 8 PIECE SAE STRAIGHT RATCHETING WRENCH SET • Contains: 5⁄16", 3⁄8", 7⁄16", 1⁄2", 9⁄16", 5⁄8", 11⁄16", 3⁄4". • Fully polished chrome vanadium steel.

Part No.

Description

RCK8

8 Piece Ratcheting Wrench Set

Shpg. Wt. (lbs.) 3.2

4 PIECE SAE LARGE STRAIGHT RATCHETING WRENCH SET • Fully polished chrome vanadium steel. • Contains: 13⁄16", 7⁄8", 15⁄16", 1". • Includes heavy-duty terylene roll pouch.

Part No.

Description

RCK4L

4 Piece Ratcheting Wrench Set

Shpg. Wt. (lbs.) 3.6

9 PIECE METRIC STRAIGHT RATCHETING WRENCH SET • Fully polished chrome vanadium steel. • Contains: 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm. • Includes heavy-duty terylene roll pouch.

Part No.

Description

RCK9M

9 Piece Ratcheting Wrench Set

Shpg. Wt. (lbs.) 3.3

5 PIECE METRIC LARGE STRAIGHT RATCHETING WRENCH SET • Fully polished chrome vanadium steel. • Contains: 19 mm, 21 mm, 22 mm, 24 mm, 25 mm. • Includes heavy-duty terylene roll pouch.

Part No.

Description

RCK5M

5 Piece Ratcheting Wrench Set

www.westwardtools.ca

Shpg. Wt. (lbs.) 5.7

109

W110-10.qxp

2/8/10

3:51 PM

Page 110

WRENCHES 8 PIECE SAE STUBBY RATCHETING WRENCH SET • Fully polished chrome vanadium steel. • Contains: 3⁄8", 7⁄16", 1⁄2", 9⁄16", 5⁄8", 11⁄16", 3⁄4". • Includes carry case.

Shpg. Wt. (lbs.)

Part No.

Description

RCK8S

8 Piece Stubby Ratchet Wrench Set

2.8

8 PIECE METRIC STUBBY RATCHETING WRENCH SET • Contains: 10 mm, 12 mm, 13 mm, 14 mm, 15 mm, 17 mm, 19 mm. • Fully polished chrome vanadium steel. • Includes carry case.

Shpg. Wt. (lbs.)

Part No.

Description

RCK8SM

8 Piece Stubby Ratchet Wrench Set

2.8

METRIC STRAIGHT RATCHETING WRENCHES • Fully polished chrome vanadium steel. • Durable and rust resistant.

Part No.

110

Size (mm)

Length (in.)

Shpg. Wt. (lbs.)

RC8M

5.51

0.2

RC10M

6.26

0.2

RC11M

6.51

0.3

RC12M

6.76

0.3

RC13M

7.01

0.4

RC14M

7.50

0.4

RC15M

7.85

0.4

RC16M

8.20

0.5

RC17M

8.88

0.5

RC18M

9.31

0.6

RC19M

9.76

0.7

RC21M

11.50

0.9

RC22M

11.50

0.9

RC24M

13.10

1.2

RC25M

13.10

1.2

RC27M

14.00

1.4

RC30M

16.00

1.8

RC32M

16.75

2.2

RC34M

18.00

2.6

RC36M

19.50

4.1

RC41M

22.75

5.8

RC46M

25.25

8.2

RC50M

25.25

8.7

www.westwardtools.ca

W111-10.qxp

2/9/10

8:11 AM

Page 111

WRENCHES SAE STRAIGHT RATCHETING WRENCHES • Fully polished chrome vanadium steel. • Durable and rust resistant.

Size (in.)

Length (in.)

Shpg. Wt. (lbs.)

RC10

5⁄16

5.51

0.2

RC12

3⁄8

6.26

0.3

RC14

7⁄16

6.51

0.3

RC16

1⁄2

7.01

0.4

RC18

9⁄16

7.50

0.4

RC20

5⁄8

8.20

0.5

RC22

11⁄16

8.88

0.6

RC24

3⁄4

9.76

0.7

RC26

13⁄16

11.50

0.8

RC28

7⁄8

13.10

1.0

RC30

15⁄16

13.10

1.0

RC32

17⁄8

13.10

1.0

RC34

11⁄16

14.00

1.4

RC36

11⁄8

16.00

2.0

RC40

11⁄4

16.75

2.0

RC42

15⁄16

18.00

2.8

RC44

13⁄8

18.00

2.8

RC46

17⁄16

19.50

4.1

RC48

11⁄2

19.50

4.1

RC50

19⁄16

22.75

5.7

RC52

15⁄8

22.75

5.5

RC54

111⁄16

24.00

6.2

RC56

13⁄4

24.00

6.4

RC58

113⁄16

25.50

8.5

RC60

17⁄8

25.50

7.7

RC64

25.50

8.5

Part No.

SAE STUBBY RATCHET WRENCHES

Size (in.)

Length (in.)

Shpg. Wt. (lbs.)

RC12S

3⁄8

3.70

0.2

RC14S

7⁄16

4.02

0.3

RC16S

1⁄2

4.21

0.3

RC18S

9⁄16

4.49

0.3

RC20S

5⁄8

4.80

0.3

RC22S

11⁄16

4.96

0.4

RC24S

3⁄4

5.43

0.5

Part No.

www.westwardtools.ca

111

W112-10.qxp

2/9/10

8:12 AM

Page 112

WRENCHES METRIC STUBBY RATCHET WRENCHES Part No.

Size (mm)

Length (in.)

Shpg. Wt. (lbs.)

RC10SM

3.70

0.2

RC12SM

4.13

0.2

RC13SM

4.21

0.3

RC14SM

4.49

0.3

RC15SM

4.65

0.3

RC17SM

4.96

0.3

RC19SM

5.43

0.4

4 PIECE SAE DOUBLE BOX END RATCHETING WRENCH SET • Contains: 5⁄16" x 3⁄8", 7⁄16" x 1⁄2", 9⁄16" x 5⁄8", • Fully polished chrome vanadium steel.

11⁄16"

x 3⁄4".

Shpg. Wt. (lbs.)

Part No.

Description

RBSK4

4 Piece Ratcheting Wrench Set

1.4

6 PIECE METRIC DOUBLE BOX END RATCHETING WRENCH SET • Contains: 8 x 9 mm, 10 x 11 mm, 12 x 13 mm, 14 x 15 mm, 16 x 18 mm, 17 x 19 mm. • Fully polished chrome vanadium steel.

Shpg. Wt. (lbs.)

Part No.

Description

RBSK6M

6 Piece Ratcheting Wrench Set

2.0

DOUBLE BOX END SAE RATCHETING WRENCHES Fully polished chrome vanadium steel.

Part No.

112

Size (in.)

Length (in.)

Shpg. Wt. (lbs.)

RBS1012

5⁄16

x 3⁄8

5.98

0.1

RBS1416

7⁄16

1⁄2

7.04

0.2

RBS1820

9⁄16

x 5⁄8

7.48

0.3

RBS2224

11⁄16

x 3⁄4

9.06

0.4

www.westwardtools.ca

W113-10.qxp

2/9/10

8:17 AM

Page 113

WRENCHES DOUBLE BOX END METRIC RATCHETING WRENCHES Part No.

Size (mm)

RBS89M

Length (in.)

Shpg. Wt. (lbs.)

8x9

5.12

0.1

RBS1011M

10 x 11

6.54

0.1

RBS1213M

12 x 13

7.04

0.2

RBS1415M

14 x 15

7.61

0.2

RBS1618M

16 x 18

7.61

0.4

RBS1719M

17 x 19

8.86

0.4

SPLINE DRIVE – EXTRA LONG DOUBLE BOX END – FLEX RATCHETING WRENCH SETS Shpg. Wt. (lbs.)

Part No.

Description

RBSK4XLS

4 Piece SAE Set, 5⁄16" - 3⁄4"

RBSK5XLMS 5 Piece Metric Set, 8 mm - 19 mm

1.2 1.7

SPLINE DRIVE – EXTRA LONG DOUBLE BOX END – FLEX RATCHETING WRENCHES – SAE Part No.

Size (in.)

Shpg. Wt. (lbs.)

RBS1012XLS

5⁄16

x 3⁄8

0.2

RBS1416XLS

7⁄16

x 1⁄2

0.2

RBS1820XLS

9⁄16

5⁄8

0.3

RBS2224XLS

11⁄16

3⁄4

0.4

SPLINE DRIVE – EXTRA LONG DOUBLE BOX END – FLEX RATCHETING WRENCHES – METRIC Size (mm)

Shpg. Wt. (lbs.)

RBS810XLMS

8 x 10

0.2

RBS1214XLMS

12 x 14

0.2

RBS1315XLMS

13 x 15

0.3

RBS1618XLMS

16 x 18

0.3

RBS1719XLMS

17 x 19

0.4

Part No.

www.westwardtools.ca

113

W114-10.qxp

2/9/10

8:18 AM

Page 114

WRENCHES 8 PIECE SAE FLEX RATCHET WRENCH SET • Fully polished chrome vanadium steel. • Contains: 5⁄16", 3⁄8", 7⁄16", 1⁄2", 9⁄16", 5⁄8", 11⁄16", 3⁄4".

Part No.

Description

RCK8F

Shpg. Wt. (lbs.)

8 Piece Flex Ratcheting Set

6.0

10 PIECE METRIC FLEX RATCHET WRENCH SET • Fully polished chrome vanadium steel. • Contains: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm.

Part No.

Description

Shpg. Wt. (lbs.)

RCK10FM 10 Piece Flex Ratchet Wrench Set

7.0

SAE FLEX HEAD RATCHET WRENCHES • Fully polished chrome vanadium steel. • Durable and rust resistant.

Part No.

Size (in.)

Length (in.)

RC10F

5⁄16

Shpg. Wt. (lbs.)

5.60

0.2

RC12F

3⁄8

6.25

0.3

RC14F

7⁄16

6.50

0.3

RC16F

1⁄2

7.00

0.4

RC18F

9⁄16

7.50

0.4

RC20F

5⁄8

8.20

0.5

RC22F

11⁄16

7.90

0.6

RC24F

3⁄4

9.75

0.7

METRIC FLEX HEAD RATCHET WRENCHES • Fully polished chrome vanadium steel. • Durable and rust resistant.

114

Part No.

Size (mm)

Length (in.)

Shpg. Wt. (lbs.)

RC10FM

6.2

0.3

RC11FM

6.5

0.3

RC12FM

6.7

0.4

RC13FM

7.0

0.4

RC14FM

7.5

0.4

RC15FM

7.9

0.5

RC16FM

8.5

0.5

RC17FM

8.9

0.6

RC18FM

9.25

0.6

RC19FM

9.6

0.7

www.westwardtools.ca

W115-10.qxp

2/9/10

8:18 AM

Page 115

WRENCHES HALFMOON REVERSIBLE RATCHETING WRENCH SETS Shpg. Wt. (lbs.)

Part No.

Description

RCK4H

4 Piece SAE Set, 3⁄8" - 7⁄8"

2.0

RCK5MH

5 Piece Metric Set, 10 mm - 22 mm

2.2

HALFMOON REVERSIBLE RATCHETING WRENCHES – SAE Part No.

Size (in.)

Length (in.)

Shpg. Wt. (lbs.)

RB1214H

3⁄8

x 7⁄16

5.2

0.2

RB1822H

1⁄2

x 9⁄16

6.2

0.3

RB2022H

5⁄8

11⁄16

7.9

0.6

9.1

0.9

RB2428H

3⁄4

x 7⁄6

HALFMOON REVERSIBLE RATCHETING WRENCHES – METRIC Part No.

Size (mm)

Length (in.)

Shpg. Wt. (lbs.)

RB1012MH

10 x 12

5.2

0.2

RB1113MH

11 x 13

5.75

0.3

RB1416MH

13 x 15

6.6

0.4

RB1517MH

16 x 18

7.8

0.6

RB1922MH

17 x 19

9.1

0.9

www.westwardtools.ca

115

W116-10.qxp

2/9/10

8:19 AM

Page 116

WRENCHES Two Reversing Levers Mirror Finish

Two Sizes

Two Reversing Levers

Two Sizes

All Metal Construction • Fully Hardened

Need as little as 5° to move a fastener.

QUADBOX™ 4-IN-1 RATCHETING WRENCHES • 4 different sizes in each wrench. • 4 dedicated reversing levers.

Length Shpg. Wt. (in.) (lbs.)

Part No.

Description

RBS1016Q

Sizes 5⁄16 x 3⁄8 x 7⁄16 x 1⁄2

RBS1824Q

Sizes

RBS813QM

Sizes 8 x 10 x 12 x 13 mm

9⁄16

5⁄8

11⁄16

3⁄4

RBS1619QM Sizes 16 x 17 x 18 x 19 mm 2 Piece SAE Set, 8 Sizes, RBSK8Q 5⁄16"

RBSK8QM

6.3

0.2

8.3

0.5

6.3

0.2

9.1

0.5

—

1.0

—

1.0

- 3⁄4"

2 Piece Metric Set, 8 Sizes, 8 mm - 19 mm

7 PIECE REVERSIBLE RATCHETING COMBINATION WRENCH SETS • • • •

Reversible 5 degree ratcheting action. Low profile head for easy access into tight areas. SAE contains: 5⁄16", 3⁄8", 7⁄16", 1⁄2", 9⁄16", 5⁄8", 3⁄4". Metric contains: 8 mm, 10 mm, 12 mm, 13 mm, 15 mm, 16 mm, 18 mm.

Shpg. Wt. (lbs.)

Part No.

Description

RCK7R

SAE

2.3

RCK7RM

Metric

2.3

5 PIECE SAE OFFSET RATCHETING BOX END WRENCH SET • Contains: 1⁄4" x 5⁄16" 3⁄8" x 7⁄16", 1⁄2" x • Includes vinyl pouch.

116

11⁄16", 5⁄8"

11⁄16", 11⁄16"

x 7⁄8".

Shpg. Wt. (lbs.)

Part No.

Description

RBFK5

5 Piece Offset Ratcheting Wrench Set

2.1

www.westwardtools.ca

W117-10.qxp

2/9/10

8:21 AM

Page 117

WRENCHES SAE OFFSET BOX END RATCHET WRENCHES Part No.

Size (in.)

Shpg. Wt. (lbs.)

RBF810

1⁄4

x 5⁄16

0.2

RBF1214

3⁄8

7⁄16

0.3

RBF1618

1⁄2

x 9⁄16

0.4

RBF2022

5⁄8

x 3⁄4

0.6

RBF2428

11⁄16

7⁄8

0.7

6 PIECE METRIC OFFSET RATCHETING BOX END WRENCH SET • Contains: 7 x 8 mm, 9 x 10 mm, 11 x 12 mm, 13 x 14 mm, 15 x 17 mm, 16 x 18 mm. • In a vinyl pouch.

Part No.

Description

RBFK6M

6 Piece Offset Ratcheting Wrench Set

Shpg. Wt. (lbs.) 1.9

METRIC OFFSET RATCHETING BOX END WRENCHES Part No.

Size (mm)

Shpg. Wt. (lbs.)

RBF78M

7x8

0.2

RBF910M

9 x 10

0.2

RBF1112M

11 x 12

0.3

RBF1314M

13 x 14

0.4

RBF1517M

15 x 17

0.5

RBF1618M

16 x 18

0.6

8 PIECE SAE & METRIC FLARE NUT WRENCH SET • • • •

SAE sizes: 3⁄8" x 7⁄16", 1⁄2" x 9⁄16", 5⁄8" x 11⁄16", 3⁄4" x 7⁄8". Metric sizes: 9 x 11 mm, 10 x 12 mm, 13 x 14 mm, 15 x 17 mm. Includes terelyne pouch. Fully polished chrome vanadium steel for durability and rust resistance.

Part No.

Description

FPKC8

8 Piece Flare Nut Wrench Set

www.westwardtools.ca

Shpg. Wt. (lbs.) 2.6

117

W118-10.qxp

2/9/10

8:23 AM

Page 118

WRENCHES 4 PIECE SAE FLARE NUT WRENCH SET • 3⁄8" x 7⁄16", 1⁄2" x 9⁄16", 5⁄8" x 11⁄16", 3⁄4" x 7⁄8". • Includes terelyne pouch. • Fully polished chrome vanadium steel for durability and rust resistance.

Part No.

Description

Shpg. Wt. (lbs.)

FPK4

4 Piece Flare Nut Wrench Set

1.3

4 PIECE METRIC FLARE NUT WRENCH • Contains: 9 x 11 mm, 10 x 12 mm, 13 x 14 mm, 15 x 17 mm. • Fully polished chrome vanadium steel for durability and rust resistance. • Includes terelyne pouch.

Part No.

Description

Shpg. Wt. (lbs.)

FPK4M

4 Piece Flare Nut Wrench Set

1.3

SAE FLARE NUT WRENCHES Part No.

Length (in.)

Shpg. Wt. (lbs.)

FP1214

3⁄8

x 7⁄16

5.98

0.2

FP1618

1⁄2

9⁄16

7.04

0.3

FP2022

5⁄8

11⁄16

FP2428

Size (in.)

3⁄4

x 7⁄8

7.61

0.4

8.86

0.6

METRIC FLARE NUT WRENCHES Part No.

Size (mm)

Length (in.)

Shpg. Wt. (lbs.)

FP911M

9 x 11

5.98

0.2

FP1012M

10 x 12

6.54

0.2

FP1314M

13 x 14

7.04

0.3

FP1517M

15 x 17

7.61

0.4

SAE FLEX HEAD FLARE NUT WRENCH SET • Drop forged chrome vanadium. • Fully polished chrome plated. • Includes 12 sizes from 1⁄4" to 7⁄8".

118

Part No.

Description

Shpg. Wt. (lbs.)

FPK6F

6 Piece Flex Flare Nut Wrench Set

2.6

www.westwardtools.ca

W119-10.qxp

2/9/10

8:23 AM

Page 119

WRENCHES SAE FLEX HEAD FLARE NUT WRENCHES • Drop forged chrome vanadium. • Fully polished chrome plated.

Part No.

Size (in.)

Shpg. Wt. (lbs.)

FP810F

1⁄4

5⁄16

0.2

FP1214F

3⁄8

x 7⁄16

0.3

FP1618F

1⁄2

9⁄16

0.3

FP2022F

5⁄8

11⁄16

0.4

FP2024F

5⁄8

x 3⁄4

0.5

FP2428F

3⁄4

7⁄8

0.6

METRIC FLEX HEAD FLARE NUT WRENCH SET • Drop forged chrome vanadium. • Fully polished chrome plated. • Includes 12 sizes from 9 mm to 21 mm.

Part No. FPK6FM

Shpg. Wt. (lbs.)

Description 6 Piece Metric Flex Head Flare Nut Wrench Set

2.6

METRIC FLEX HEAD FLARE NUT WRENCHES • Drop forged chrome vanadium. • Fully polished chrome plated.

Part No.

Size (mm)

Shpg. Wt. (lbs.)

FP911FM

9 x 11

0.2

FP1012FM

10 x 12

0.2

FP1314FM

13 x 14

0.3

FP1517FM

15 x 17

0.3

FP1618FM

16 x 18

0.4

FP1921FM

19 x 21

0.5

ECONOMY ADJUSTABLE WRENCHES • Drop forged alloy steel. • Wide handles for better comfort.

Part No. AG6

Length (in.) Opening (in.) 6

Shpg. Wt. (lbs.)

3⁄4

0.3

AG8

0.6

AG10

11⁄4

0.9

AG12

17⁄16

1.4

www.westwardtools.ca

119

W120-10.qxp

2/9/10

8:24 AM

Page 120

WRENCHES PREMIUM SERIES ADJUSTABLE WRENCHES The “AP” series adjustable wrenches have a handle 60% thicker then regular adjustables. This provides a more comfortable hand fit and easy to apply force. • Chrome vanadium alloy for strength and durability. • Wider opening than regular adjustable wrenches. • Smaller head tip, allows for use in constricted spaces. • Both SAE and metric scales on wrench.

Maximum Jaw Opening (in.)

Length (in.)

Shpg. Wt. (lbs.)

AP4

3⁄4

0.3

AP6

15⁄16

0.6

AP8

11⁄8

0.9

AP10

15⁄16

1.4

AP12

11⁄2

1.5

AP15

115⁄16

3.5

AP18

211⁄32

5.6

AP24

23⁄4

8.3

Part No.

LIGHTWEIGHT ADJUSTABLE WRENCHES • • • •

Combines the strength of chrome vanadium with a lightweight composite handle. Patented ergonomic design for greater comfort. Wide jaw opening allows for greater range capacity. Both metric and SAE scales for versatility.

Maximum Jaw Opening (in.)

Length (in.)

Shpg. Wt. (lbs.)

AL6

15⁄16

0.3

AL8

11⁄8

0.4

AL10

15⁄16

0.6

AL12

11⁄2

1.2

Part No.

8" DUAL RELEASE ADJUSTABLE WRENCH • • • •

Easy one-hand adjustment and release. Fits both metric and SAE nuts. 15° wrench provides greater leverage distance reducing arm and hand fatigue. Chrome vanadium construction.

Part No. AP8DR

120

Length (in.)

Shpg. Wt. (lbs.)

7.8

0.6

www.westwardtools.ca

W121-10.qxp

2/9/10

8:26 AM

Page 121

WRENCHES

FASWRENCH™ RATCHETING ADJUSTABLE WRENCHES • • • • •

Patented ratchet function jaw. Cushion grip handle for comfort and control. Chrome vanadium steel construction. Hardness: HRC 40 – 50 of handle and jaw. Exceeds ANSI performance specifications.

Part No. AR6 AR8 AR10

Size (in.)

Bolt Size (in.)

Shpg. Wt. (lbs.)

1⁄8

- 1⁄2

0.3

1⁄4

5⁄8

0.5

3⁄8

7⁄8

0.9

FASWRENCH™ RATCHETING ADJUSTABLE WRENCH SET Part No.

Description

Shpg. Wt. (lbs.)

ARK3

6", 8" and 10" FasWrench™ Set

1.9

FIVE-IN-ONE 12" MULTI-WRENCH Adjustable Wrench Sturdy 12 inch (300 mm) adjustable wrench with jaw opening to exceed 13⁄4 inch (45 mm) enabling the user to cover a larger range of applications. Tips of jaws are tapered to fit into confined areas. Laser etched SAE and MM rule on wrench head for easy fastener identification. Pipe Wrench Pipe wrench to grip standard pipe. Precision aligned induction hardened gripping teeth on both jaws prevents slipping. Hammer Precision balanced 115° striking head is critical for driving spikes and pins. Ratcheting Box End ratcheting hex box end can be used with hex drive sockets or special applications requiring drive through feature of large hole sockets. 7⁄8"

Shown with FH12A adapter. (not included)

Ratcheting 1⁄2" Drive With the use of an adapter available in regular or quick release the tool becomes an ordinary ratchet for use with 1⁄2" drive sockets.

Part No.

Length (in.)

Shpg. Wt. (lbs.)

1.8

FH12

www.westwardtools.ca

121

W122-10.qxp

2/9/10

8:27 AM

Page 122

WRENCHES 1⁄2"

SQUARE DRIVE ADAPTER FOR MULTI WRENCH

• 7⁄8" hex with quick release button. • Overall length is 11⁄2".

Part No.

Description

FH12A

1⁄2"

Shpg. Wt. (lbs.)

Adapter For Multi Wrench

0.2

POUCH FOR 12" MULTI WRENCH • Terylene with leather edging. • Metal chain and clip for sockets. • Heavy-duty rivets with metal belt clips.

Part No.

Description

FH12P

31⁄4" x 61⁄2" Multi Wrench Pouch

Shpg. Wt. (lbs.) 0.4

HEAVY-DUTY STRAP WRENCH Part No. 108-5

Length (in.)

Shpg. Wt. (lbs.)

2.0

REPLACEMENT STRAP FOR WESTWARD STRAP WRENCH Part No. 108-5STR

Size (in.)

Shpg. Wt. (lbs.)

0.1

RAPID PIPE WRENCHES • • • • •

122

Single handed operation. Powerful triple point grip. Self adjusting. Easy ratchet action. Cast iron body with a CR-V steel jaws.

Part No.

Size (in.)

Shpg. Wt. (lbs.)

PW10R

1.2

PW14R

3.2

PW18R

5.8

www.westwardtools.ca

W123-10.qxp

2/9/10

8:27 AM

Page 123

WRENCHES HEAVY-DUTY STEEL PIPE WRENCHES • Drop forged steel. • Replaceable jaws.

Length (in.)

Pipe Capacity (in.)

Shpg. Wt. (lbs.)

0.8

PWT10

11⁄2

1.8

PWT12

13⁄4

2.8

PWT14

3.5

PWT18

21⁄2

5.8

PWT24

9.8

PWT36

19.0

Part No. PWT8

HEAVY-DUTY ALUMINUM PIPE WRENCHES • Lighter than regular steel pipe wrench. • Replacement parts available.

Pipe Capacity (in.)

Part No.

Length (in.)

Shpg. Wt. (lbs.)

PWAT14

2.5

PWAT18

21⁄2

3.8

PWAT24

6.0

PWAT36

11.0

HOOK JAWS FOR WESTWARD PIPE WRENCHES Part No.

Size (in.)

Shpg. Wt. (lbs.)

PWT8HJ

0.2

PWT10HJ

0.4

PWT12HJ

0.6

PWT14HJ

0.9

PWT18HJ

1.5

PWT24HJ

2.2

PWT36HJ

4.2

www.westwardtools.ca

123

W124-10.qxp

2/9/10

8:28 AM

Page 124

WRENCHES HEEL JAW & PIN FOR WESTWARD PIPE WRENCHES Size (in.)

Shpg. Wt. (lbs.)

PWT8HJP

Part No.

0.1

PWT10HJP

0.1

PWT12HJP

0.1

PWT14HJP

0.1

PWT18HJP

0.2

PWT24HJP

0.3

PWT36HJP

0.5

SPRING FOR WESTWARD PIPE WRENCHES Part No.

Size (in.)

Shpg. Wt. (lbs.)

PWT8S

0.1

PWT10S

0.1

PWT12S

0.1

PWT14S

0.1

PWT18S

0.1

PWT24S

0.1

PWT36S

0.1

KNURL FOR WESTWARD PIPE WRENCHES Part No.

Size (in.)

Shpg. Wt. (lbs.)

PWT8K

0.1

PWT10K

0.1

PWT12K

0.1

PWT14K

0.1

PWT18K

0.1

PWT24K

0.2

PWT36K

0.2

INDUSTRIAL RUBBER STRAP WRENCH SET • Innovative design – a high density ergonomic handle with reinforced rubber strap. • Ideal for delicate surfaces. • Limits scratching. • The perfect tool to have handy for tightening and loosening oddshaped items. • Standard applications include: oil-filters, container lids, general plumbing work, pipe and pipe fittings.

124

Part No.

Description

109K

4" and 6" Capacity

Shpg. Wt. (lbs.) 1.7

www.westwardtools.ca

W125-10.qxp

2/9/10

8:29 AM

Page 125

WRENCHES PRESET TORQUE WRENCHES Torque is preset to factory torque limits and calibrated for accuracy to within ±4%. Can easily be recalibrated by operator without need for service center repair. Chrome vanadium, fully heat treated handle with 105° offset provides strength and corrosion resistance. Meets ANSI spec. B107.14M. Preset Torque Wrench Set Item No. TWPK5 Includes one of each 1⁄2" drive preset torque wrenches in 60, 80, 100, 120, 140 ft-lb torque settings.

Drive Size (in.)

Part No.

Torque Settings Torque (ft-lbs) Settings (Nm)

Shpg. Wt. (lbs.)

Preset Torque Wrench Set, 5 Pcs. TWPK5

1⁄2

60 - 140

80 - 190

0.8

Preset Torque Wrenches TWP1260

1⁄2

0.8

WTP1280

1⁄2

110

0.8

TWP12100

1⁄2

100

135

0.8

TWP12120

1⁄2

120

165

0.8

TWP12140

1⁄2

140

190

0.8

DEFLECTING BEAM TORQUE WRENCH Part No.

Drive (in.)

Torque (ft-lbs)

Torque (Nm)

Length (in.)

Shpg. Wt. (lbs.)

1⁄2

10 - 150

13 - 203

183⁄4

1.4

TWB12150

TORQUE MULTIPLIERS • For loosening and tightening bolts without a power tool. • Can be used with a torque wrench for more precise control of high torque pressure. • Provides steady pressure reducing impact.

Part No.

Output Maximum Torque Maximum Torque Shpg. Wt. Output Input Drive Input (lbs.) (ft-lbs) (ft-lbs) Drive (in.) (in.)

TM2000

3⁄4

600

1,950

20.0

TM1100

1⁄2

3⁄4

250

1,100

8.0

www.westwardtools.ca

125

W126-10.qxp

2/9/10

8:30 AM

Page 126

WRENCHES 1⁄4"

• • • • • • •

DRIVE MECHANICS SERIES TORQUE WRENCH

Clockwise and counter-clockwise operation. 60 tooth ratchet head for precision torque control. Accuracy within 3% clockwise / 5% counter-clockwise at 20% to 100% of full scale. Factory calibrated for accuracy. Audible click when desired torque is reached. Hi-bright double nickel chrome plated seamless tube. Knurled metal grip.

Part No. TWC14

3⁄8"

• • • • • • •

1⁄2"

Head Width (in.)

Shpg. Wt. (lbs.)

6.22 - 17.8

0.8

2.1

Drive (in.)

Torque Range (ft-lbs)

Torque (Nm)

Length (in.)

Head Width (in.)

Shpg. Wt. (lbs.)

3⁄8

20 - 100

13 - 142

16.9

1.3

2.3

DRIVE 100 FT-LB MECHANICS TORQUE WRENCH

Part No. TWC12100

1⁄2"

Drive (in.)

Torque Range (ft-lbs)

Torque (Nm)

Length (in.)

Head Width (in.)

Shpg. Wt. (lbs.)

1⁄2

20 - 100

34 - 142

16.9

1.3

2.3

DRIVE 250 FT-LB MECHANICS TORQUE WRENCH

Part No. TWC12

126

50 - 150

Length (in.)

DRIVE 100 FT-LB MECHANICS TORQUE WRENCH

TWC38

• • • • • • •

1⁄4

Torque (Nm)

Part No.

• • • • • • •

Drive Torque Range (in.) (in-lbs)

Drive (in.)

Torque Range (ft-lbs)

Torque (Nm)

Length (in.)

Head Width (in.)

Shpg. Wt. (lbs.)

1⁄2

20 - 250

34 - 345

27.4

1.6

4.7

www.westwardtools.ca

W127-10.qxp

2/9/10

8:30 AM

Page 127

WRENCHES 3⁄8"

DRIVE 80 FT-LB INDUSTRIAL TORQUE WRENCH

Ergonomically designed handle for comfort and ease of operation. Patented geared adjustment, with dual scale. Positive torque locking knob, slim profile and proven mechanism. Factory calibrated to comply with ISO6789. Accuracy is within ±3% of reading at full scale and within ±6% of reading at 20% of full scale.

Part No. TWA38

1⁄2"

Drive

Torque

Length

Shpg.

(in.)

Range

(in.)

Wt. (lbs.)

3⁄8

5 - 80

11 - 108

141⁄2

2.5

DRIVE 150 FT-LB INDUSTRIAL TORQUE WRENCH

Egonomically designed handle for comfort and ease of operation. Patented geared adjustment, with dual scale. Positive torque locking knob, slim profile and proven mechanism. Factory calibrated to comply with ISO6789. Accuracy is within ±3% of reading at full scale, and within ±6% of reading at 20% of full scale.

Part No.

Drive

Torque Torque Length

(in.)

Range

TWA12150

1⁄2"

1⁄2

10 - 150 13 - 203

Shpg.

(in.)

Wt. (lbs.)

181⁄4

3.0

DRIVE 250 FT-LB INDUSTRIAL TORQUE WRENCH

Drive Part No. TWA12

3⁄4"

Torque

Length

Shpg.

(in.)

Range

(in.)

Wt. (lbs.)

1⁄2

25 - 250

34 - 339

6.0

DRIVE INDUSTRIAL TORQUE WRENCH

Part No. TWA34

Drive

Torque

Length

Shpg.

(in.)

Range

(in.)

Wt. (lbs.)

3⁄4

100 - 600

136 - 814

13.5

www.westwardtools.ca

127

W128-10.qxp

2/9/10

8:33 AM

Page 128

WRENCHES

TWD38

TWD12

TWD12150

ELECTRONIC TORQUE WRENCHES • • • • • • • • • •

Part No.

Drive (in.)

Three modes: preset torque, track, and peak hold. Visible flash LED, audible (beep), force bar (on display) preset alarms. Torque accuracy: 2% clockwise, 3% counter-clockwise from 5 – 100%. Two “AA” alkaline cells for battery power included. Auto turn off after 40 seconds, low battery display. 90% humidity, non-condensing. Splash-proof, protects against water and most fluids. Operating temperature: 40 – 110° F (5 – 42° C). Storage temperature: 0 – 122° F (-20 – 50° C). ISO 6789-2003 and ASME B107-28-2005 standards compliant.

Torque (ft-lbs)

Torque (Nm)

Shpg. Wt. (lbs.)

TWD38

3⁄8

0 - 80

0 - 116

3.4

TWD12

1⁄2

50 - 250

73 - 345

5.1

TWD12150

1⁄2

30 - 150

47 - 210

5.0

DIGITAL USB TORQUE WRENCHES Digital USB torque wrenches are an evolution in torque wrench technology with the ability to pre-program torque wrench settings and download usage data into an easily useable spreadsheet for analysis. • Torque units: ft-lbs, Nm, kg-cm, in-lbs. • USB data connection (software included) and 999 use memory. • Three modes: preset, track and peak. • Angle range 5° – 360°. • Aluminum handle with carbon fibre shaft. • Visible LED flash and audible beep. • Torque accuracy: 2% clockwise, 3% counter-clockwise from 10 – 100%. • ISO-6789-2003 and ASME B107-28-2005 standards compliant.

Part No.

Drive (in.)

Torque Range (ft-lbs)

Torque Range (Nm)

Shpg. Wt. (lbs.)

TWD38USB

3⁄8

0 - 80

0 - 116

3.4

TWD12150USB

1⁄2

30 - 150

47 - 210

5.0

TWD12USB

1⁄2

50 - 250

73 - 345

5.1

128

www.westwardtools.ca

W129-10.qxp

2/12/10

2:22 PM

Page 129

SCREWDRIVERS, HEX BITS & DRIVER BITS

Premium Series Screwdrivers & Sets . . . . . . . . . . . . . . . . . . . . 130-133 Screwdriver Sets . . . . . . . . . . . . . 134 Screwdrivers . . . . . . . . . . . . 135-136 Insulated Screwdriver Sets . . . . . . 137 Precision Screwdrivers . . . . . 140-143 Multi-Bit Screwdrivers . . . . . . 138-139 Power Tool Accessory Kits . . . 144-145 Nut Setters . . . . . . . . . . . . . . . . . 145 Power Bit Drivers . . . . . . . . . 146-148 Insert Driver Bits . . . . . . . . . . . . . 149 Nut Drivers. . . . . . . . . . . . . . 150-151 Insulated Nut Drivers . . . . . . . . . . 151 Hex Keys & Sets . . . . . . . . . . 152-156 Folding Hex Keys . . . . . . . . . 157-158

W130-10.qxp

2/9/10

8:36 AM

Page 130

SCREWDRIVERS 9-PIECE CONTRACTOR SERIES SCREWDRIVER SET • Contains 3 sizes of Phillips, 3 square drive and 3 slotted screwdrivers. • Acetate handles with rubber grips. • Tip type printed on handle end for quick identification. • Blades are SVCM55 modified S2 steel.

Part No.

Description

SK9

9-Piece Set

Shpg. Wt. (lbs.) 2.4

CONTRACTOR SERIES SQUARE DRIVE SCREWDRIVERS • High quality acetate handles with rubber comfort grips. • Precision machined tips. • Handle ends marked with size and type for easy identification.

Part No.

Tip Size

Blade Length (in.) Shpg. Wt. (lbs.)

SR14R

0.2

SR24R

0.2

SR34R

0.3

CONTRACTOR SERIES SLOTTED SCREWDRIVER • High quality acetate handles with rubber comfort grips. • Precision machined tips. • Handle ends marked with size and type for easy identification.

Part No. Tip Size (in.) Blade Length (in.) Shpg. Wt. (lbs.)

130

SS41R

1⁄4

1⁄2

0.1

SS44R

1⁄4

0.2

SS46R

1⁄4

0.3

SS412R

1⁄4

0.4

SS56R

5⁄16

0.2

SS68R

5⁄16

0.4

SS88R

3⁄8

0.4

www.westwardtools.ca

W131-10.qxp

2/9/10

8:37 AM

Page 131

SCREWDRIVERS CONTRACTOR SERIES PHILLIPS SCREWDRIVERS • High quality acetate handles with rubber comfort grips. • Precision machined tips. • Handle ends marked with size and type for easy maintenance.

Tip Size

Blade Length (in.)

Shpg. Wt. (lbs.)

SP13R

0.2

SP14R

0.2

SP112R

0.4

SP21R

11⁄2

0.1

SP24R

0.2

SP212R

0.4

SP36R

0.3

Part No.

CONTRACTOR SERIES ELECTRICIANS SCREWDRIVERS • High quality acetate handles with rubber comfort grips. • Precision machined tips. • Handle ends marked with size and type for easy identification.

Tip Size (in.)

Blade Length (in.)

Shpg. Wt. (lbs.)

SE23R

1⁄8

0.1

SE24R

1⁄8

0.1

SE34R

3⁄16

0.2

SE36R

3⁄16

0.2

SE38R

3⁄16

0.3

Part No.

CONTRACTOR SERIES POZI-DRIVE SCREWDRIVERS • High quality acetate handles with rubber comfort grips. • Precision machined tips. • Handle ends marked with size and type for easy identification.

Part No.

Tip Size

Blade Length (in.) Shpg. Wt. (lbs.)

SPZ13R

0.1

SPZ24R

0.2

www.westwardtools.ca

131

W132-10.qxp

2/9/10

8:38 AM

Page 132

SCREWDRIVERS CONTRACTOR SERIES SPEED SCREWDRIVERS • • • • •

Available in slot and Phillips tips. Rotating action speeds insertion of fasteners. Precision ground tips. High quality acetate handle with rubber comfort grips. Handle ends marked with size and type for easy identification.

Part No.

Blade Length (in.)

Tip Size

Shpg. Wt. (lbs.)

SSS36R

3⁄16"

Slot

0.2

SES46R

1⁄4"

Slot

0.2

SPS16R

#1 Phillips

0.3

SPS26R

#2 Phillips

0.3

CONTRACTOR SERIES HOLDING SCREWDRIVERS • • • •

For slot or Phillips screws. Holds screws in place for installation in hard to access locations. High quality acetate handle with rubber comfort grip. Handle ends marked with size and type for easy identification

Part No.

Tip Size

Blade Length (in.)

Shpg. Wt. (lbs.)

SSH25R

1⁄8"

Slot

0.2

SSH36R

3⁄16"

Slot

0.2

SPH05R

#0 Phillips

0.3

SPH15R

#1 Phillips

0.3

SPH27R

#2 Phillips

0.4

10 PIECE MECHANICS SERIES SCREWDRIVER SET • • • • •

132

3 part injection molded handle with soft grip. Blades are SVCM55 modified S2 steel. 20% stronger than chrome vanadium. Tip type printed on handle end for quick identification. Contains 4 slotted screwdrivers: 1⁄4" x 4", 1⁄4" x 6", 5⁄16" x 6" and 3⁄8" x 8". 3 square drive: #1 x 4", #2 x 4" and #3 x 4". 3 Phillips: #1 x 4", #2 x 4" and #3 x 6". In a roll pouch.

Part No.

Description

Shpg. Wt. (lbs.)

SK10

10 Piece Set

4.1

www.westwardtools.ca

W133-10.qxp

2/9/10

8:39 AM

Page 133

SCREWDRIVERS

Part No.

Tip Size Blade Overall (in.) Length (in.) Length (in.)

Shpg. Wt. (lbs.)

SS44T

1⁄4

81⁄2

0.2

SS46T

1⁄4

101⁄2

0.2

SS56T

5⁄16

107⁄8

0.3

SS68T

3⁄8

127⁄8

0.4

Part No. SR04T

Blade Overall Tip Size Length (in.) Length (in.) 0

81⁄2

0.2 0.2

SR14T

SR24T

81⁄2

0.2

SR34T

81⁄2

0.3

Blade Overall Tip Size Length (in.) Length (in.)

Shpg. Wt. (lbs.)

SP14T

0.2

SP24T

81⁄2

0.3

SP36T

107⁄8

0.4

Part No.

Tip Size Blade Overall Shpg. Wt. (in.) Length (in.) Length (in.) (lbs.)

SE23T

1⁄8

0.2

SE24T

1⁄8

0.2

SE34T

3⁄16

0.2

SE36T

3⁄16

0.3

www.westwardtools.ca

• • • •

3 part injection molded handle with soft grip. Blades are SVCM55 modified S2 steel. 20% stronger than chrome vanadium. Tip type printed on handle end for quick identification.

Shpg. Wt. (lbs.)

81⁄2

Part No.

MECHANICS SERIES SLOTTED SCREWDRIVERS

MECHANICS SERIES SQUARE SCREWDRIVERS • • • •

3 part injection molded handle with soft grip. Blades are SVCM55 modified S2 steel. 20% stronger than chrome vanadium. Tip type printed on handle end for quick identification.

MECHANICS SERIES PHILLIPS SCREWDRIVERS • • • • •

3 part injection molded handle with soft grip. Blades are SVCM55 modified S2 steel. 20% stronger than chrome vanadium. Tip type printed on handle end for quick identification. Hex shaft.

MECHANICS SERIES ELECTRICIAN SCREWDRIVERS • • • •

3 part injection molded handle with soft grip. Blades are SVCM55 modified S2 steel. 20% stronger than chrome vanadium. Tip type printed on handle end for quick identification.

133

W134-10.qxp

2/9/10

8:40 AM

Page 134

SCREWDRIVERS 12 PIECE SCREWDRIVER SET • Square PVC handles prevent roll-aways if dropped. • Black finished shafts. • #1 x 3", #2 x 11⁄2", #2 x 4", #3 x 6" Phillips and # 1, 2, 3, square drive. • 1⁄4" x 11⁄2", 1⁄4" x 4", 1⁄4" x 6", 5⁄16" round shank and 3⁄8" square shank. • Includes vinyl pouch.

Part No.

Description

Shpg. Wt. (lbs.)

SDK12

12 Piece Set

4.0

6 PIECE SCREWDRIVER SET • Square PVC handles prevent roll-aways if dropped. • Black finished shafts. • 1⁄8" x 2", 1⁄8" x 4" electricians, #2 x 4" Phillips and #2 x 5" square. • 1⁄4" x 11⁄2", 1⁄4" x 4" square shank. • Includes vinyl pouch.

Part No.

Description

SDK6

6 Piece Set

Shpg. Wt. (lbs.) 2.0

5 PIECE POWER-THRU SCREWDRIVER SET • One piece blade extends through the handle and provides a striking surface. • Square shanks provide positive gripping surface. • Set contains: 3⁄16", 1⁄4" and 5⁄16" slotted drives and #1 and #2 Phillips. • Includes vinyl roll pouch. • PVC handle.

Part No.

Description

SDSPK5

Shpg. Wt. (lbs.)

5 Piece Power-Thru Set

1.2

6 PIECE MAGNETIC TORKS SCREWDRIVER SET • Contains Torks T10, T15, T20, T25, T27 and T30. • Includes vinyl pouch. • PVC handle.

134

Part No.

Description

SDTK6

6 Piece Set

Shpg. Wt. (lbs.) 1.2

www.westwardtools.ca

W135-10.qxp

2/9/10

8:40 AM

Page 135

SCREWDRIVERS SLOTTED ROUND SHANK SCREWDRIVERS Part No.

Shank Size

Blade Length (in.)

Overall Length (in.)

Shpg. Wt. (lbs.)

SDR700

1⁄4"

11⁄2

31⁄2

0.1

SDR701

1⁄4"

81⁄4

0.2

SDR702

1⁄4"

101⁄4

0.2

SDR703

5⁄16"

103⁄4

0.3

SDR704

3⁄8"

131⁄4

0.3

SDR705

3⁄8"

151⁄4

0.4

SDR706

3⁄8"

0.5

SDR708

1⁄4"

231⁄2

293⁄4

0.8

SQUARE DRIVE SCREWDRIVERS Part No.

Shank Size

Blade Length (in.)

Overall Length (in.)

Shpg. Wt. (lbs.)

SDR100

37⁄8

71⁄4

0.1

87⁄8

0.1 0.2 0.2

SDR101

SDR102

91⁄4

SDR103

51⁄4

97⁄8

SDR111

0.3

SDR112

141⁄2

0.3

SDR113

75⁄8

121⁄2

0.3

PHILLIPS SCREWDRIVERS Part No.

Shank Size

Blade Length (in.)

Overall Length (in.)

Shpg. Wt. (lbs.)

SDP739

71⁄4

0.1

SDP740

71⁄4

0.1

11⁄2

31⁄2

0.1 0.2

SDP741 SDP742

83⁄4

SDP743

107⁄8

0.2

141⁄2

0.3

SDP752

SQUARE SHANK SLOTTED SCREWDRIVERS Shank Size

Blade Length (in.)

Overall Length (in.)

Shpg. Wt. (lbs.)

SDS730

1⁄4"

81⁄4

0.2

SDS731

5⁄16"

103⁄8

0.3

SDS732

3⁄8"

131⁄4

0.4

SDS733

3⁄8"

171⁄4

0.5

Part No.

www.westwardtools.ca

135

W136-10.qxp

2/9/10

8:41 AM

Page 136

SCREWDRIVERS

ELECTRICIANS SCREWDRIVERS Blade Length Overall Length (in.) (in.)

Shpg. Wt. (lbs.)

Part No.

Shank Size

SDC105

1⁄8"

21⁄2

41⁄2

0.1

SDE720

1⁄8"

53⁄8

0.1

SDE721

1⁄8"

71⁄2

0.1

SDE722

3⁄16"

0.2

SDE723

3⁄16"

0.2

SDE724

3⁄16"

137⁄8

0.3

POWER-THRU PHILLIPS SCREWDRIVERS Part No.

Size

SDSP740

SDSP742

Blade Length Overall Length (in.) (in.)

Shpg. Wt. (lbs.)

71⁄4

0.2

83⁄4

0.3

POWER-THRU SLOTTED SQUARE SHANK SCREWDRIVERS Part No.

Size

SDSP729

3⁄16"

Blade Length Overall Length (in.) (in.)

Shpg. Wt. (lbs.)

71⁄4

0.1

SDSP730

1⁄4"

81⁄4

0.2

SDSP731

5⁄16"

103⁄8

0.3

TORKS SCREWDRIVERS Part No. SDT10

Shank Size

Blade Length Overall Length (in.) (in.)

T10

Shpg. Wt. (lbs.)

61⁄2

0.1 0.1

SDT15

T15

73⁄4

SDT20

T20

73⁄4

0.1

SDT25

T25

81⁄4

0.1 0.4

SDT27

T27

81⁄4

SDT30

T30

81⁄4

0.2

SDTL15

T15

0.2

POZIDRIVE SCREWDRIVERS

136

Blade Length Overall Length (in.) (in.)

Shpg. Wt. (lbs.)

Part No.

Shank Size

SDPZ13

71⁄4

0.2

SDPZ24

83⁄4

0.2

www.westwardtools.ca

W137-10.qxp

2/9/10

8:42 AM

Page 137

SCREWDRIVERS 12 PIECE INSULATED SCREWDRIVER SET • • • • •

Rated for 1,000 VAC. Heavy-duty, fully insulated. Soft grip handles. Individually tested to DIN EN60900. Contains: slot sizes 3⁄32", 1⁄8", 5⁄32", 7⁄32", 1⁄4", Phillips sizes #10, #1, #2 and square sizes #10, #1, #2 and #3. • Includes a terylene pouch.

Part No.

Description

Shpg. Wt. (lbs.)

SK12E

12 Piece Insulated Set

2.5

7 PIECE INSULATED SCREWDRIVER SET • • • • •

Rated for 1,000 VAC. Heavy-duty, fully insulated. Soft grip handles. Individually tested to DIN EN60900. Contains: slot sizes 1⁄8", 5⁄32", 7⁄32", Phillips sizes #1, #2 and square sizes #1, #2. • Includes a terylene pouch.

Part No.

Description

SK7E

7 Piece Insulated Set

Shpg. Wt. (lbs.) 1.5

INSULATED SLOT SCREWDRIVERS • • • •

Rated for 1,000 VAC. Heavy-duty, fully insulated. Soft grip handles. Individually tested to DIN EN60900.

Part No. Tip Size (in.) Blade Length (in.) Shpg. Wt. (lbs.) SE13E

3⁄32

0.1

SE24E

1⁄8

0.1

SE34E

5⁄32

0.2

SE35E

7⁄32

0.2

SE46E

1⁄4

0.3

INSULATED SQUARE DRIVE SCREWDRIVERS • • • •

Rated for 1,000 VAC. Heavy-duty, fully insulated. Soft grip handles. Individually tested to DIN EN60900.

Part No.

Tip Size

Blade Length (in.) Shpg. Wt. (lbs.)

SR04E

0.2

SR14E

0.2

SR24E

0.2

SR34E

0.2

www.westwardtools.ca

137

W138-10.qxp

2/12/10

2:24 PM

Page 138

SCREWDRIVERS INSULATED PHILLIPS SCREWDRIVERS • • • •

Rated for 1,000 VAC. Heavy-duty, fully insulated. Soft grip handles. Individually tested to DIN EN60900.

Part No.

Tip Size

Blade Length (in.) Shpg. Wt. (lbs.)

SP02E

23⁄8

0.1

SP13E

31⁄8

0.2

SP24E

0.2

MULTI-PURPOSE SCREWDRIVER • Contains: one each 3⁄16", 1⁄4" slotted, #1, #2 Phillips, #1, #2 square bits. • Flip top handle for easy access and storage.

Part No.

Description

SD13

Multi-Bit Screwdriver

Shpg. Wt. (lbs.) 0.4

RATCHETING 16-IN-1 SCREWDRIVER • • • • •

3 2 3 4 4

slotted bits (3⁄16", 1⁄4", and 5⁄16"). Pozidrive bits (#1 and #2). Phillips bits (#1, #2, and #3). Torks bits (T15, T20, T25, and T30). hex bits (2.5 mm, 4 mm, 5⁄32" and 1⁄8").

Part No.

Description

Shpg. Wt. (lbs.)

SD16

Ratcheting Screwdriver

1.2

10-IN-1 SCREWDRIVER • • • •

138

2 3 3 2

slotted bits (5 mm and 6 mm). Phillips bits (#1, #2, and #3). square bits (#1, #2, and #3). hex bits (5⁄16" and 1⁄4").

Part No.

Description

SD10

Shpg. Wt. (lbs.)

10-in-1 Screwdriver

0.4

www.westwardtools.ca

W139-10.qxp

2/9/10

8:43 AM

Page 139

SCREWDRIVERS STUBBY 4-IN-1 SCREWDRIVER • 2 slotted bits (5 mm and 6 mm). • 1 Phillips bit, #2. • 1 square bit, #2.

Part No.

Description

SD4S

Stubby 4-in-1 Screwdriver

Shpg. Wt. (lbs.) 0.2

6-IN-1 SCREWDRIVER • 2 slotted bits (5 mm and 6 mm). • #2 Phillips. • #2 square drive. • 1⁄4" and 5⁄16" nut drivers.

Part No.

Description

SD6

6-in-1 Screwdriver

Shpg. Wt. (lbs.) 0.3

29 PIECE SCREWDRIVER BIT SET • Contains: 5⁄64", 3⁄32", 7⁄64", 1⁄8", 9⁄64" hex bits; #0, #1, #2, #3 Phillips bits; #1, #2 Pozidrive bits; #0, #1, #2, #3 square bits; 1-2, 3-4, 5-6, 8-10, 12-14 slotted bits; T10, T15, T20, T25, T30, T40 torks bits. • Screwdriver handle, 1⁄4" drive adapter and extension. • Includes high impact case.

Part No.

Description

SDK29

29 Piece Bit Set

Shpg. Wt. (lbs.) 1.0

GEARLESS RATCHETING SCREWDRIVER SET • Contains: 3⁄16", 7⁄32", 1⁄4" slotted bits; #0, #1, #2, #3 Phillips; #1, #2, #3 Pozidrive bits; #1, #2, #3 square; T8, T10, T15, T20, T25, T27, T30, T40, T45 torks bits; 1⁄16", 5⁄64", 3⁄32", 7⁄64", 1⁄8", 9⁄64", 5⁄32", 3⁄16", 7⁄32", 1⁄4", 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6 mm hex bits. • Gearless ratcheting screwdriver handle and 1⁄4" drive adapter. • Includes high impact case.

Part No.

Description

Shpg. Wt. (lbs.)

SDK45

45 Piece Set

1.2

www.westwardtools.ca

139

W140-10.qxp

2/9/10

8:44 AM

Page 140

SCREWDRIVERS GEARDRIVER SOCKET & HEX BIT SET • Innovative interchangeable shaft technology brings a new standard in ratcheting drivers. • Offers unparalleled access and flexibility for a wide variety of applications. • Interchangeable shafts allow access to nearly any fastener. • Dual durometer grip handle for exceptional comfort and high torque. • 1⁄4" drive SAE sockets (5⁄32", 3⁄16", 1⁄4", 9⁄32", 5⁄16", 11⁄32", 3⁄8", 7⁄16" and 1⁄2"). • 1⁄4" drive metric sockets (4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13 and 14 mm). • 31⁄2" magnetic bit holder, bit holder (6" and 10"), 1⁄4" drive extension bars (31⁄2, 6", 10"), 1⁄4" drive flex extension bar. • 1⁄4" drive bits adaptor, 1⁄4" drive shaft adaptor. • Torks: T15, T20, T25, T30, T40, hex: 1⁄8", 5⁄32", 3⁄16", 1⁄4", 5⁄16", Phillips: #1, #2 (2 pieces), #3, slotted: 5⁄32", 3⁄16", 1⁄4", square: #1, #2, #3.

Part No.

Description

GDC53

53 Piece Bit and Socket Set

Shpg. Wt. (lbs.) 4.3

MICRODRIVER RATCHETING SOCKET & BIT DRIVER SET • Drive 1⁄4" drive sockets with square end adapter. • Drive 1⁄4" and 5⁄16" bits. • Double box ratcheting wrench, 1⁄4" and 5⁄16". Includes: • 5 – socket SAE. 5⁄16", 3⁄8", 7⁄16", 1⁄2", 9⁄16". • 5 – socket MM. 8, 10, 12, 13, 14 mm • 1 reversible double box MicroDriver 1⁄4" x 5⁄16". • 1 – 1⁄4" drive socket adapter. • 10 –1⁄4 bits. Slotted: 5⁄32", 7⁄32", 9⁄32" Phillips: #1, #2, #3 Hex: 5⁄32", 3⁄16", 7⁄32", 1⁄4" • Injection case with removable belt clip.

Part No.

Description

SK35M

35 Piece Kit

Shpg. Wt. (lbs.) 0.8

15 PIECE PRECISION SCREWDRIVER SET • 1 mm, 2 mm, 3 mm, 3.5 mm round shank slotted precision screwdriver. • #0, #0-3, #1-2 Phillips precision screwdriver. • 1.5 mm, 2.0 mm, 2.5 mm, 3.0 mm hex precision screwdriver. • T6, T8, T10, T15 torks precision screwdriver. • Storage case.

140

Part No.

Description

SDPK15

15 Piece Precision Set

Shpg. Wt. (lbs.) 0.3

www.westwardtools.ca

W141-10.qxp

2/9/10

8:45 AM

Page 141

SCREWDRIVERS

6 PIECE PRECISION SCREWDRIVER SET • 2.0 mm, 2.4 mm, 3.0 mm round shank slotted precision screwdriver. • #0, #0-2, #1-2 Phillips precision screwdriver. • Includes plastic storage case.

Part No.

Description

SDPK6

6 Piece Precision Set

Shpg. Wt. (lbs.) 0.2

6 PIECE SLOTTED PRECISION SCREWDRIVER SET • Contains precision screwdrivers: 1.0 mm, 1.4 mm, 2.0 mm, 2.4 mm, 3.0 mm, 3.5 mm. • Includes plastic storage case.

Part No.

Description

SDPK6S

6 Piece Precision Set

Shpg. Wt. (lbs.) 0.2

6 PIECE PHILLIPS PRECISION SCREWDRIVER SET • Contains precision screwdrivers: #0-5, #0-4, #0-3, #0-2, #0, #1-2 Phillips. • Includes plastic storage case.

Part No.

Description

SDPK6P

6 Piece Precision Set

Shpg. Wt. (lbs.) 0.2

6 PIECE HEX PRECISION SCREWDRIVER SET • Contains precision screwdrivers: 0.9, 1.3, 1.5, 2.0, 2.5, 3.0 mm hex. • Includes storage case.

Part No.

Description

SDPK6H

6 Piece Precision Set

www.westwardtools.ca

Shpg. Wt. (lbs.) 0.2

141

W142-10.qxp

2/9/10

8:46 AM

Page 142

SCREWDRIVERS 6 PIECE TORKS PRECISION SCREWDRIVER SET • Contains precision screwdrivers: T6, T7, T8, T9, T10, T15 Torks. • Includes storage case.

Part No.

Description

Shpg. Wt. (lbs.)

SDPK6T

6 Piece Precision Set

0.2

SLOTTED PRECISION SCREWDRIVERS Part No.

Size (mm)

Blade Length Overall (mm) Length (mm)

Shpg. Wt. (lbs.)

SDP40S10

1.0

120

0.1

SDP40S20

2.0

120

0.1

SDP40S24

2.4

120

0.1

SDP40S30

3.0

120

0.1

SDP40S35

3.5

120

0.1

PHILLIPS PRECISION SCREWDRIVERS Blade Length Overall (mm) Length (mm)

Shpg. Wt. (lbs.)

Part No.

Size

SDP40P05

#0-5

120

0.1

SDP40P04

#0-4

120

0.1

SDP40P03

#0-3

120

0.1

SDP40P02

#0-2

120

0.1

120

0.1

#1-2

120

0.1

SDP40P0 SDP40P12

HEX HEAD PRECISION SCREWDRIVERS Part No.

Size (mm)

Blade Length Overall (mm) Length (mm)

Shpg. Wt. (lbs.)

SDP40H09

0.9

120

0.1

SDP40H13

1.3

120

0.1

SDP40H15

1.5

120

0.1

SDP40H20

2.0

120

0.1

SDP40H25

2.5

120

0.1

SDP40H30

3.0

120

0.1

TORKS PRECISION SCREWDRIVERS

142

Part No.

Size

Blade Length

Overall Length

Shpg. Wt. (lbs.)

SDP40T6

40 mm

120

0.1

SDP40T7

40 mm

120

0.1

SDP40T8

40 mm

120

0.1

SDP40T9

40 mm

120

0.1

SDP40T10

#10

40 mm

120

0.1

SDP40T15

#15

40 mm

120

0.1

www.westwardtools.ca

W143-10.qxp

2/9/10

8:47 AM

Page 143

SCREWDRIVERS

6-IN-1 PRECISION SCREWDRIVER SET • Contains two-way bits: #00 Phillips and #2 Slotted; #0 Phillips and #3 Slotted; #1 Phillips and #4 Slotted. • Includes precision screwdriver handle and plastic storage case.

Part No.

Description

SDPK5

6 Piece Precision Set

Shpg. Wt. (lbs.) 0.2

36 PIECE SCREWDRIVER BIT SET Set includes: 80 mm • Square: #1, #2. • Phillips: #1, #2. 25 mm • Phillips: #1, #2, #3. • Pozi-driv: #1, #2, #3. • Torks: #8, #9, #10, #15, #20, #25, #27, #30, #40. • Slotted: 3.5, 4.5, 5, 5.5, 6.5, 8 mm. • Square: #1, #2, #3. • Hex: #2, #3, #4, #5, #6, #8. • Screwdriver handle. • Steel case. • Contains 80 mm long square: #1, #2, Phillips: #1, #2. • Contains 25 mm long Phillips: #1, #2, #3, Pozi-driv: #1, #2, #3, Torks: #8, #9, #10, #15, #20, #25, #27, #30, #40, slotted: 3.5, 4.5, 5, 5.5, 6.5, 8 mm, square: #1, #2, #3, hex: #2, #3, #4, #5, #6, #8. • Includes a screwdriver handle and steel case.

Part No.

Description

SDK36

36 Piece Bit Set

Shpg. Wt. (lbs.) 2.4

32 PIECE SCREWDRIVER BIT SET • Phillips: #1, #2, #3, slotted: 4, 5.5, 6.5 mm, hex: #4, #5, #6. • Square: (2 pieces each) #1, #2, #3. • Torks: (2 pieces each) #10, #20, #40; (3 pieces each) #15, #25, #30. • Magnetic bit holder. • Plastic moulded case with belt clip.

Part No.

Description

SDK32

32 Piece Bit Set

www.westwardtools.ca

Shpg. Wt. (lbs.) 0.8

143

W144-10.qxp

2/9/10

8:48 AM

Page 144

SCREWDRIVERS

11-PIECE POWER TOOL ACCESSORY KIT 6-pieces, 50 mm S-2 bits. • Slotted: 3⁄16", 1⁄4". • Phillips: #1, #2. • Square: #1, #2. 4-pieces, 75 mm S-2 bits. • Phillips: #1, #2. • Square: #1, #2. • 1-piece, flexible extension.

Part No.

Description

PTA11

11-Piece Kit

Shpg. Wt. (lbs.) 1.1

40-PIECE POWER TOOL ACCESSORY KIT 14-pieces, 1" screwdriver bits. • Phillips: #0, #1, #2, #3. • Slotted: 5⁄32", 3⁄16", 1⁄4". • Torks: T10, T15, T20, T25. • Square: #1, #2, #3. 3-pieces, 2" screwdriver bits. • Phillips: #1, #2. • Slotted: 1⁄4". 1-piece, 3" push-in quick change chuck. 3-pieces, 17⁄8" magnetic nut driver. • 1⁄4", 5⁄16", 3⁄8" 19-pieces, H.S.S. drills. • 1⁄16", 5⁄64", 3⁄32", 7⁄64", 1⁄8", 9⁄64", 5⁄32", 11⁄64", 3⁄16", 17⁄64", 9⁄32", 19⁄64", 5⁄16", 11⁄32", 3⁄8".

Part No.

Description

PTA40

40-Piece Kit

13⁄64", 7⁄32", 15⁄64", 1⁄4",

Shpg. Wt. (lbs.) 3.7

57-PIECE POWER TOOL ACCESSORY KIT 48-pieces, 25 mm screwdriver bits. • Phillips: #0 (2), #1 (3), #2 (8), #3 (2). • Torks: T8, T9, T10, T15, T20, T25, T27, T30, T40. • Slotted: 1⁄8", 5⁄32", 3⁄16" (2), 1⁄4" (2), 9⁄32". • Square: #0, #1, #2, #3. • Pozi: #0, #1 (2), #2 (4), #3. • Hex: 3⁄32", 1⁄8", 5⁄32", 3⁄16", 1⁄4". 4-pieces, 50 mm screwdriver bits. • Phillips: #1, #2. • Slotted: 3⁄16", 1⁄4". 3-pieces, 45 mm magnetic nut driver. • 1⁄4", 5⁄16", 3⁄8". 1-piece, 50 mm magnetic bit holder. Easy grip stubby ratcheting bit driver.

144

Part No.

Description

PTA57

57-Piece Kit

Shpg. Wt. (lbs.) 4.2

www.westwardtools.ca

W145-10.qxp

2/9/10

8:49 AM

Page 145

SCREWDRIVERS 300 PIECE POWER TOOL ACCESSORY KIT A 300 piece driver, drilling, and accessory kit in a storage case with room for a drill and battery. Contains: hole saws, center punches, nut drivers, drill gauge, countersink, wood spade bits, masonry drill bits, HSS drill bits, TiN coated HSS drill bits, 2" driver bits, 1" driver bits, and a magnetic bit holder.

Part No.

Description

Shpg. Wt. (lbs.)

PT300

300 Piece Kit

30.0

1⁄4"

SHANK MAGNETIC BIT HOLDERS

These magnetic bit holders are constructed of chrome vanadium steel and come in a regular or quick release style for use with insert or power bits.

Part No.

Description

Length (mm)

Shpg. Wt. (lbs.)

BHM14-60

1⁄4"

Regular

0.1

BHM14-60Q

1⁄4"

Quick Release

0.1

Part No.

Size (in.)

Length (in.)

Shpg. Wt. (lbs.)

BNS56-8

1⁄4

13⁄4

0.1

BNS56-10

5⁄16

13⁄4

0.1

BNS56-12

3⁄8

13⁄4

0.1

BNS80-8

1⁄4

21⁄2

0.1

BNS80-10

5⁄16

21⁄2

0.1

BNS80-12

3⁄8

21⁄2

0.1

Size (mm)

Length (mm)

Shpg. Wt. (lbs.)

BNS506M

0.1

BNS507M

0.1

BNS508M

0.1

BNS5010M

0.1

BNS656M

0.1

BNS657M

0.1

BNS658M

0.1

BNS6510M

0.1

Part No.

www.westwardtools.ca

1⁄4" SHANK POWER NUT SETTERS – MAGNETIC

These magnetic nut setter bits are designed to provide high performance and total control over the fastener. Each nut setter is constructed of modified steel and has a lobular design which drives the fastener on the side as opposed to applying force on the corners of the fastener.

1⁄4" SHANK METRIC POWER NUT SETTERS – MAGNETIC

145

W146-10.qxp

2/9/10

8:50 AM

Page 146

SCREWDRIVERS

1⁄4"

SHANK SQUARE POWER BITS – 2 PIECE Each bit is constructed of modified S2 steel and are designed for the high torque requirements of power tools. These bits are designed for quick and easy change-out for use in drill chucks or bit holders.

1⁄4"

SHANK PHILLIPS POWER BITS

Each bit is constructed of modified S2 steel and are designed for the high torque requirements of power tools. These bits are designed for quick and easy change-out for use in drill chucks or bit holders.

1⁄4"

SHANK TORKS POWER BITS

Each bit is constructed of modified S2 steel and is designed for the high torque requirements of power tools. These bits are designed for quick and easy change-out. For use in drill chucks or bit holders.

146

Part No.

Size

Length (in.)

Package Type

Pkg. Qty.

Shpg. Wt. (lbs.)

BSSQ501

115⁄16

BSSQ501P

Bulk

0.1

115⁄16

Carded

0.1

BSSQ502

115⁄16

Bulk

0.1

BSSQ502P

115⁄16

Carded

0.1

BSSQ503

115⁄16

Bulk

0.1

BSSQ503P

115⁄16

Carded

0.1

Part No.

Size

Length (in.)

Package Type

Pkg. Qty.

Shpg. Wt. (lbs.)

BSP501

115⁄16

Bulk

0.1

BSP501P

115⁄16

Carded

0.1

BSP502

115⁄16

Bulk

0.1

BSP502P

115⁄16

Carded

0.1

BSP503

115⁄16

Bulk

0.1

BSP503P

115⁄16

Carded

0.1

Part No.

Size

Length (in.)

Package Type

Pkg. Qty.

Shpg. Wt. (lbs.)

BST5010

#10

115⁄16

Bulk

0.1

BST5010P

#10

115⁄16

Carded

0.1

BST5015

#15

115⁄16

Bulk

0.1

BST5015P

#15

115⁄16

Carded

0.1

BST5020

#20

115⁄16

Bulk

0.1

BST5020P

#20

115⁄16

Carded

0.1

BST5025

#25

115⁄16

Bulk

0.1

BST5025P

#25

115⁄16

Carded

0.1

BST5027

#27

115⁄16

Bulk

0.1

BST5027P

#27

115⁄16

Carded

0.1

BST5030

#30

115⁄16

Bulk

0.1

BST5030P

#30

115⁄16

Carded

0.1

BST5040

#40

115⁄16

Bulk

0.1

BST5040P

#40

115⁄16

Carded

0.1

www.westwardtools.ca

W147-10.qxp

2/9/10

8:50 AM

Page 147

SCREWDRIVERS

Size (mm)

Length (in.)

Package Type

Pkg. Qty.

Shpg. Wt. (lbs.)

BSS504M

0.8 x 4.0

115⁄16

BSS504MP

Bulk

0.1

0.8 x 4.0

115⁄16

Carded

0.1

BSS5055M

1.0 x 5.5

115⁄16

Bulk

0.1

BSS5055MP

1.0 x 5.5

115⁄16

Carded

0.1

BSS5065M

1.2 x 6.5

115⁄16

Bulk

0.1

BSS5065MP

1.2 x 6.5

115⁄16

Carded

0.1

BSS508M

1.6 x 8.0

115⁄16

Bulk

0.1

BSS508MP

1.6 x 8.0

115⁄16

Carded

0.1

Part No.

1⁄4"

SHANK SLOTTED POWER BITS

Part No.

Size

Length (in.)

Package Type

Pkg. Qty.

Shpg. Wt. (lbs.)

BSPZ501

115⁄16

Bulk

0.1

BSPZ501P

115⁄16

Carded

0.1

BSPZ502

1⁄4"

115⁄16

Bulk

0.1

BSPZ502P

115⁄16

Carded

0.1

BSPZ503

115⁄16

Bulk

0.1

115⁄16

Carded

0.1

Part No.

Size

Length (in.)

Package Type

Pkg. Qty.

Shpg. Wt. (lbs.)

BSH504

1⁄8"

115⁄16

Bulk

0.1

BSH504P

1⁄8"

115⁄16

Carded

0.1

BSH5045

9⁄64"

115⁄16

Bulk

0.1

BSH5045P

9⁄64"

115⁄16

Carded

0.1

BSH505

5⁄32"

115⁄16

Bulk

0.1

BSH505P

5⁄32"

115⁄16

Carded

0.1

BSH506

3⁄16"

115⁄16

Bulk

0.1

BSH506P

3⁄16"

115⁄16

Carded

0.1

BSH507

7⁄32"

115⁄16

Bulk

0.1

BSH507P

7⁄32"

115⁄16

Carded

0.1

1⁄4"

BSH508

1⁄4"

115⁄16

Bulk

0.1

BSH508P

1⁄4"

115⁄16

Carded

0.1

BSH503M

3 mm

115⁄16

Bulk

0.1

BSH503MP

3 mm

115⁄16

Carded

0.1

BSH504M

4 mm

115⁄16

Bulk

0.1

BSH504MP

4 mm

115⁄16

Carded

0.1

BSH505M

5 mm

115⁄16

Bulk

0.1

BSH505MP

5 mm

115⁄16

Carded

0.1

BSH506M

6 mm

115⁄16

Bulk

0.1

BSH506MP

6 mm

115⁄16

Carded

0.1

BSPZ503P

www.westwardtools.ca

SHANK POZIDRIVE POWER BITS

SHANK HEX POWER BITS

147

W148-10.qxp

2/9/10

8:51 AM

Page 148

SCREWDRIVERS

1⁄4"

SHANK SQUARE INSERT BITS – 2 PIECE

These insert bits are designed for use in hand-driving applications, or with power tools when incorporated with a Westward Magnetic Bit Holder. These bits are designed for quick and easy change-out. Each bit is constructed of high-grade modified S2 tool steel and features a standard 1 inch length.

1⁄4"

SHANK PHILLIPS INSERT BITS

1⁄4"

SHANK HEX INSERT BITS

148

Part No.

Size

Length Package Pkg. Shpg. Wt. (in.) Type Qty. (lbs.)

BSSQ251

Bulk

0.1

BSSQ251P

Carded

0.1

BSSQ252

Bulk

0.1

BSSQ252P

Carded

0.1

BSSQ253

Bulk

0.1

BSSQ253P

Carded

0.1

Part No.

Size

BSP251

Bulk

0.1

BSP251P

Carded

0.1

BSP252

Bulk

0.1

BSP252P

Carded

0.1

BSP253

Bulk

0.1

BSP253P

Carded

0.1

Part No.

Size

BSH254

1⁄8"

BSH254P

1⁄8"

BSH2545

9⁄64"

Bulk

BSH2545P

9⁄64"

Carded

0.1

BSH255

5⁄32"

Bulk

0.1

BSH255P

5⁄32"

Carded

0.1

BSH256

3⁄16"

Bulk

0.1

BSH256P

3⁄16"

Carded

0.1

BSH257

7⁄32"

Bulk

0.1

BSH257P

7⁄32"

Carded

0.1

BSH258

1⁄4"

Bulk

0.1

BSH258P

1⁄4"

Carded

0.1

BSH253M

3 mm

Bulk

0.1

BSH253MP

3 mm

Carded

0.1

BSH254M

4 mm

Bulk

0.1

BSH254MP

4 mm

Carded

0.1

BSH255M

5 mm

Bulk

0.1

BSH255MP

5 mm

Carded

0.1

BSH256M

6 mm

Bulk

0.1

BSH256MP

6 mm

Carded

0.1

Length Package Pkg. Shpg. Wt. (in.) Type Qty. (lbs.)

Length Package (in.) Type

Pkg. Qty.

Shpg. Wt. (lbs.)

Bulk

0.1

Carded

0.1

www.westwardtools.ca

W149-10.qxp

2/9/10

8:52 AM

Page 149

SCREWDRIVERS

Part No.

Size (mm)

Length Package Pkg. Shpg. Wt. (in.) Type Qty. (lbs.)

BSS254M

0.8 x 4.0

Bulk

0.1

BSS254MP

0.8 x 4.0

Carded

0.1

BSS2555M

1.0 x 5.5

Bulk

0.1

BSS2555MP 1.0 x 5.5

Carded

0.1

BSS2565M

0.1

1.2 x 6.5

Bulk

BSS2565MP 1.2 x 6.5

Carded

0.1

BSS258M

1.6 x 8.0

Bulk

0.1

BSS258MP

1.6 x 8.0

Carded

0.1

Length Package (in.) Type

Pkg. Qty.

Shpg. Wt. (lbs.)

0.1

Carded

0.1

Bulk

0.1

Carded

0.1

Bulk

0.1

Carded

0.1

Part No.

Size

BSPZ251

Bulk

BSPZ251P

BSPZ252

BSPZ252P

BSPZ253

BSPZ253P

1⁄4"

SHANK SLOTTED INSERT BITS

1⁄4"

SHANK POZIDRIVE INSERT BITS

Length Package Pkg. Shpg. Wt. (in.) Type Qty. (lbs.)

Part No.

Size

BST258

Bulk

0.1

BST258P

Carded

0.1

BST2510

#10

Bulk

0.1

BST2510P

#10

Carded

0.1

1⁄4"

BST2515

#15

Bulk

0.1

BST2515P

#15

Carded

0.1

BST2520

#20

Bulk

0.1

BST2520P

#20

Carded

0.1

BST2525

#25

Bulk

0.1

BST2525P

#25

Carded

0.1

BST2527

#27

Bulk

0.1

BST2527P

#27

Carded

0.1

BST2530

#30

Bulk

0.1

BST2530P

#30

Carded

0.1

BST2540

#40

Bulk

0.1

BST2540P

#40

Carded

0.1

www.westwardtools.ca

SHANK TORKS INSERT BITS

149

W150-10.qxp

2/9/10

8:53 AM

Page 150

NUT DRIVERS GEARDRIVER™ STUBBY NUT DRIVER SET • Innovative interchangeable shaft technology brings a new standard in ratcheting drivers. • Interchangeable shafts allow access to nearly any fastener. • Dual durometer grip handle for exceptional comfort and high torque. • Fine tooth high torque, soft grip ratcheting stubby handle. • SAE nut driver shafts: 3⁄16", 1⁄4", 5⁄16", 11⁄32", 3⁄8", 7⁄16" and 1⁄2". • Metric nut driver shafts: 6, 7, 8, 9, 10, 11, and 12 mm.

Part No.

Description

Shpg. Wt. (lbs.)

GDC15

Nut Driver Set

2.2

7 PIECE SAE NUT DRIVER SET • Colour coded shafts for size identification of sizes. • PVC handle provides positive grip and prevents tools from rolling. • Includes sizes: 3⁄16", 1⁄4", 5⁄16", 11⁄32", 3⁄8", 7⁄16" and 1⁄2". In a vinyl pouch.

Part No.

Description

NSD7

7 Piece Nut Driver Set

Shpg. Wt. (lbs.) 1.6

8 PIECE METRIC NUT DRIVER SETS • Colour coded shafts for size identification of sizes. • PVC handle provides positive grip and prevents tools from rolling. • Includes sizes: 6, 7, 8, 9, 10, 11, 12 and 13 mm. In a vinyl pouch.

Part No.

Description

NDMK8

8 Piece Nut Driver Set

Shpg. Wt. (lbs.) 2.0

SAE NUT DRIVERS

150

Part No.

Size (in.)

Shaft Colour

Length (in.)

Shpg. Wt. (lbs.)

NSD316

3⁄16

Black

61⁄2

0.2

NSD14

1⁄4

Red

61⁄2

0.2

NSD516

5⁄16

Yellow

61⁄2

0.2

NSD1132

11⁄32

Green

61⁄2

0.2

NSD38

3⁄8

Blue

0.2

NSD716

7⁄16

Brown

0.2

NSD12

1⁄2

Red

0.2

www.westwardtools.ca

W151-10.qxp

2/9/10

8:53 AM

Page 151

NUT DRIVERS METRIC NUT DRIVERS Part No.

Size (mm)

Shaft Colour

Length (in.)

Shpg. Wt. (lbs.)

Black

61⁄2

0.2 0.2

NDM6 NDM7

Red

61⁄2

NDM8

Yellow

61⁄2

0.2 0.2

NDM9

Green

61⁄2

NDM10

Blue

61⁄2

0.2

NDM11

Brown

0.2

NDM12

Red

0.2

NDM13

Blue

0.2

INSULATED SAE NUT DRIVER SET All Westward insulated tools meet DIN EN60900 standards. Each nut driver is individually tested to 10,000 VAC and approved to 1,000 VAC. These insulated tools are tested to ensure they meet impact dielectric, adhesion indentation and flame retardancy standards. The soft contoured handles provide a comfortable positive grip. The set includes 1⁄4", 5⁄16", 3⁄8", 7⁄16", and 1⁄2" sizes.

Part No.

Description

NDK5E

Insulated Nut Driver Set

Shpg. Wt. (lbs.) 1.5

INSULATED SAE NUT DRIVERS • • • •

Rated for 1,000 VAC. Heavy-duty, fully insulated. Soft grip handles. Individually tested to DIN EN60900.

Part No.

Size Blade Head Overall Handle Shpg. Wt. (in.) Length (in.) Width (in.) Length (in.) Width (in.) (lbs.)

ND08E

1⁄4

13⁄32

91⁄4

111⁄32

0.3

ND10E

5⁄16

13⁄32

91⁄4

111⁄32

0.3

ND12E

3⁄8

7⁄16

91⁄4

111⁄32

0.3

ND14E

7⁄16

91⁄4

111⁄32

0.3

ND16E

1⁄2

7⁄16

91⁄4

111⁄32

0.3

www.westwardtools.ca

151

W152-10.qxp

2/9/10

8:55 AM

Page 152

HEX KEYS 25 PIECE COMBINATION SAE & METRIC HEX KEY WRENCH SET • Manufactured from Chrome-Molybdenum for strength and durability. • Contains 1⁄16", 5⁄64", 3⁄32", 7⁄64", 1⁄8", 9⁄64", 5⁄32", 3⁄16", 7⁄32", 1⁄4", 5⁄16", 3⁄8", 1.5 mm, 2 mm, 2.5 mm, 3 mm, 4 mm, 4.5 mm, 5 mm, 5.5 mm, 6 mm, 7 mm, 8 mm, 9 mm, 10 mm. • Includes vinyl pouch.

Part No.

Description

HKP25

Shpg. Wt. (lbs.)

25 Piece Hex Key Set

0.5

10 PIECE LONG METRIC HEX KEY SET WITH CLIP • Manufactured from Chrome-Molybdenum for strength and durability. • Contains 10 hex keys sizes from 1.5 mm to 10 mm. • Includes plastic holder for easy storage and selection.

Part No.

Description

Shpg. Wt. (lbs.)

MHKLC10

10 Piece Long Hex Key Set

0.3

10 PIECE SHORT METRIC HEX KEY SET WITH CLIP • Manufactured from Chrome-Molybdenum for strength and durability. • Contains 10 hex keys sizes from 1.5 mm to 10 mm. • Includes plastic holder for easy storage and selection.

Part No.

Description

Shpg. Wt. (lbs.)

MHKC10

10 Piece Short Hex Key Set

0.2

10 PIECE LONG SAE HEX KEY SET WITH CLIP • Manufactured from Chrome-Molybdenum for strength and durability. • Contains 10 hex keys sizes from 1⁄16" to 3⁄8". • Includes plastic holder for easy storage and selection.

Part No.

Description

Shpg. Wt. (lbs.)

HKLC10

10 Piece Long Hex Key Set

0.3

10 PIECE SHORT SAE HEX KEY SET WITH CLIP • Manufactured from Chrome-Molybdenum for strength and durability. • Contains 10 hex keys sizes from 1⁄16" to 3⁄8". • Includes plastic holder for easy storage and selection.

152

Part No.

Description

Shpg. Wt. (lbs.)

HKC10

10 Piece Hex Key Set

0.2

www.westwardtools.ca

W153-10.qxp

2/9/10

9:12 AM

Page 153

HEX KEYS SHORT SAE HEX KEYS Size (in.)

Long Arm Length (in.)

HK116

1⁄16

1.750

0.562

0.1

HK564

5⁄64

1.875

0.609

0.1

HK332

3⁄32

2.000

0.656

0.1

HK764

7⁄64

2.125

0.703

0.1

HK18

1⁄8

2.250

0.750

0.1

HK964

9⁄64

2.375

0.796

0.1

HK532

5⁄32

2.500

0.844

0.1

HK316

3⁄16

2.750

0.938

0.1

HK732

7⁄32

3.000

1.031

0.1

HK14

1⁄4

3.250

1.125

0.1

HK516

5⁄16

3.750

1.250

0.1

HK38

3⁄8

4.250

1.375

0.1

HK716

7⁄16

4.750

1.500

0.2

HK12

1⁄2

5.250

1.625

0.2

HK916

9⁄16

5.750

1.750

0.2

HK58

5⁄8

6.250

1.875

0.2

HK34

3⁄4

7.250

2.125

0.2

Size (in.)

Long Arm Length (in.)

Short Arm Length (in.)

Shpg. Wt. (lbs.)

HKL116

1⁄16

3.000

0.562

0.1

HKL564

5⁄64

3.188

0.609

0.1

HKL332

3⁄32

3.375

0.656

0.1

HKL764

7⁄64

3.562

0.703

0.1

HKL18

1⁄8

3.750

0.750

0.1

HKL964

9⁄64

3.937

0.796

0.1

HKL532

5⁄32

4.125

0.844

0.1

HKL316

3⁄16

4.500

0.938

0.1

HKL732

7⁄32

4.875

1.031

0.1

HKL14

1⁄4

5.250

1.125

0.1

HKL516

5⁄16

6.000

1.250

0.2

HKL38

3⁄8

6.750

1.375

0.2

HKL716

7⁄16

7.250

1.500

0.2

HKL12

1⁄2

8.250

1.625

0.3

HKL916

9⁄16

9.000

1.750

0.3

HKL58

5⁄8

9.750

1.875

0.4

HKL34

3⁄4

11.250

2.125

0.5

HKL1

14.250

2.625

0.6

Part No.

Short Arm Length (in.)

Shpg. Wt. (lbs.)

LONG SAE HEX KEYS Part No.

www.westwardtools.ca

153

W154-10.qxp

2/9/10

9:13 AM

Page 154

HEX KEYS SHORT METRIC HEX KEYS Part No.

Size (mm)

Long Arm Length (mm)

Short Arm Length (mm)

Shpg. Wt. (lbs.)

MHK015

1.5

0.1

2.5

0.1

MHK3

0.1

MHK4

0.1

4.5

0.1

MHK2 MHK25

MHK45 MHK5

0.1

5.5

0.1

MHK6

0.1

MHK7

0.1

MHK8

0.1

MHK9

100

0.1

MHK10

106

0.1

MHK12

119

0.2

MHK14

133

0.2

MHK15

136

0.2

MHK17

152

0.2

MHK19

171

0.2

Long Arm Length (mm)

Short Arm Length (mm)

Shpg. Wt. (lbs.)

MHK55

LONG METRIC HEX KEYS Part No. MHKL015

1.5

0.1

2.5

0.1

MHKL3

100

0.1

MHKL4

106

0.1

MHKL5

118

0.1

MHKL6

140

0.2

MHKL8

160

0.2

MHKL10

170

0.2

MHKL12

212

0.2

MHKL14

236

0.2

MHKL15

240

0.2

MHKL17

250

0.3

MHKL19

280

0.3

MHKL2 MHKL25

154

Size (mm)

www.westwardtools.ca

W155-10.qxp

2/9/10

9:14 AM

Page 155

HEX KEYS

7 PIECE SAE BALL POINT HEX KEY SET • Ball point allows for tightening and loosening at an angle up to 25°. • Manufactured from chrome-molybdenum steel. • Contains sizes: 1⁄8", 5⁄32", 3⁄16", 7⁄32", 1⁄4", 5⁄16", 3⁄8". • Includes plastic holder for easy storage and size selection.

Part No.

Description

HKBC7

7 Piece Ball Point Set

Shpg. Wt. (lbs.) 0.2

7 PIECE METRIC BALL POINT HEX KEY SET • Ball point allows for tightening and loosening at an angle up to 25°. • Manufactured from chrome-molybdenum steel. • Contains sizes: 2.5, 3, 4, 5, 6, 8, 10 mm. • Includes plastic holder for easy storage and size selection.

Part No.

Description

MHKBC7

7 Piece Ball Point Set

Shpg. Wt. (lbs.) 0.2

SAE BALL POINT HEX KEYS • Ball point allows tightening and loosening at an angle up to 25°. • Manufactured from chrome-molybdenum steel.

Part No.

Size (in.)

Shpg. Wt. (lbs.)

HKB18

1⁄8

0.1

HKB532

5⁄32

0.1

HKB316

3⁄16

0.1

HKB732

7⁄32

0.1

HKB14

1⁄4

0.1

HKB516

5⁄16

0.1

HKB38

3⁄8

0.1

METRIC BALL POINT HEX KEYS • Ball point allows tightening and loosening at an angle up to 25°. • Manufactured from chrome-molybdenum steel.

Part No.

Size (mm)

Shpg. Wt. (lbs.)

MHKB25

2.5

0.1

MHKB3

0.1

MHKB4

0.1

MHKB5

0.1

MHKB6

0.1

MHKB8

0.1

MHKB10

0.1

www.westwardtools.ca

155

W156-10.qxp

2/9/10

9:15 AM

Page 156

HEX KEYS 8 PIECE SAE T-HANDLE HEX KEY SET • New TRP/PP (thermoplastic ethylene propylene) rubber blend handle grips. • TRP/PP provides high impact strength, high abrasion resistance, high tear strength and excellent grip. • TRP/PP also provides excellent fluid and weather resistance. • Shafts are 6150 chrome vanadium alloy. • Contains 5⁄64", 3⁄32", 1⁄8", 5⁄32", 3⁄16", 1⁄4", 5⁄16" and 3⁄8". • Includes metal stand for storage.

Part No.

Description

HKTL8PP

8 Piece "T" Handle Set

Shpg. Wt. (lbs.) 3.5

METRIC 8 PIECE T-HANDLE HEX KEY SET • New TRP/PP (thermoplastic ethylene propylene) rubber blend handle grips. • TRP/PP provides high impact strength, high abrasion resistance, high tear strength and excellent grip. • TRP/PP also provides excellent fluid and weather resistance. • Shafts are 6150 chrome vanadium alloy. • Contains 2, 2.5, 3, 4, 5, 6, 9 and 10 mm. • Includes metal stand for storage.

Part No.

Description

Shpg. Wt. (lbs.)

MHKTL8PP

8 Piece "T" Handle Set

3.5

SAE T-HANDLE HEX KEYS WITH TRP/PP GRIPS Size (in.)

Blade Length (in.)

Shpg. Wt. (lbs.)

5-64

4.7

0.2

HKTL8PP3

3⁄32

4.7

0.2

HKTL8PP4

1⁄8

4.7

0.2

HKTL8PP5

5⁄32

4.7

0.2

HKTL8PP6

3⁄16

4.7

0.2

HKTL8PP8

1⁄4

6.5

0.2

HKTL8PP10

5⁄16

6.5

0.3

HKTL8PP12

3⁄8

6.5

0.3

Part No. HKTL8PP25

METRIC T-HANDLE HEX KEYS WITH TRP/PP GRIPS Part No. MHKTL8PP2

Blade Length (mm)

Shpg. Wt. (lbs.)

119.0

0.2

2.5

116.0

0.2

MHKTL8PP3

118.0

0.2

MHKTL8PP4

119.0

0.2

MHKTL8PP5

120.0

0.2

MHKTL8PP6

164.0

0.2

MHKTL8PP8

165.0

0.3

MHKTL8PP10

164.0

0.3

MHKTL8PP25

156

Size (mm)

www.westwardtools.ca

W157-10.qxp

2/9/10

9:15 AM

Page 157

HEX KEYS SAE 9 PIECE FOLDING HEX KEY SET • New TRP/PP (thermoplastic ethylene propylene rubber blend) handle grips. • TPR/PP provides high impact strength, high abrasion resistance, high tear strength and excellent grip. • TPR/PP also provides excellent fluid and weather resistance. • Shafts are 6150 chrome vanadium alloy. • Includes sizes: 5⁄64", 3⁄32", 7⁄64", 1⁄8", 9⁄64", 5⁄32", 3⁄16", 7⁄32" and 1⁄4".

Part No.

Description

HKF9PP

9 Piece Folding Hex Key Set

Shpg. Wt. (lbs.) 0.5

METRIC 8 PIECE FOLDING HEX KEY SET • New TRP/PP (thermoplastic ethylene propylene rubber blend) handle grips. • TPR/PP provides high impact strength, high abrasion resistance, high tear strength and excellent grip. • TPR/PP also provides excellent fluid and weather resistance. • Shafts are 6150 chrome vanadium alloy. • Includes sizes: 1.5, 2, 2.5, 3, 4, 5, 6 and 8 mm.

Part No.

Description

Shpg. Wt. (lbs.)

HKF8PPM 8 Piece Folding Hex Key Set

0.5

TORKS 8 PIECE FOLDING HEX KEY SET • New TRP/PP (thermoplastic ethylene propylene rubber blend) handle grips. • TPR/PP provides high impact strength, high abrasion resistance, high tear strength and excellent grip. • TPR/PP also provides excellent fluid and weather resistance. • Shafts are 6150 chrome vanadium alloy. • Includes sizes: T9, T10, T15, T20, T25, T27, T30 and T40.

Part No.

Description

HTF8PP

8 Piece Folding Torks Set

Shpg. Wt. (lbs.) 0.5

METRIC/SAE/TORKS COMBO HEX KEY SET • Thermoplastic ethylene propylene rubber blended handle. • CR-V 6150 alloy steel. • Includes: HKF9PP, HKF8PPM and HTF8PP.

Part No.

Description

HKS3PP

3 Piece Combo Set

www.westwardtools.ca

Shpg. Wt. (lbs.) 1.8

157

W158-10.qxp

2/9/10

9:16 AM

Page 158

HEX KEYS 17 PIECE SAE/TORKS HEX KEY SET • Includes 9 SAE hex keys in a plastic holder and HTF8PP folding torks key set. • Sizes include: 1⁄16" - 3⁄8".

Shpg. Wt. (lbs.)

Part No.

Description

HKS17

SAE Hex Key and Folding Torks Set

1.0

7 PIECE SAE FOLDING HEX KEY WRENCH SET • Contains: 1⁄16", 5⁄64", 3⁄32", 1⁄8", 5⁄32", 3⁄16", 7⁄32". • Chrome plated steel case.

Shpg. Wt. (lbs.)

Part No.

Description

HKF7

7 Piece Folding Hex Key Set

0.5

7 PIECE METRIC FOLDING HEX KEY WRENCH SET • Contains: 1.5, 2, 2.5, 3, 4, 5, 6 mm. • Chrome plated steel case.

Shpg. Wt. (lbs.)

Part No.

Description

HKF7M

7 Piece Metric Folding Hex Key Set

0.5

9 PIECE SAE FOLDING HEX KEY WRENCH SET • Contains: 5⁄64", 3⁄32", 7⁄64", 1⁄8", 9⁄64", 5⁄32", 3⁄16", 7⁄32", 1⁄4". • Chrome plated steel case.

Shpg. Wt. (lbs.)

Part No.

Description

HKF9

9 Piece Folding Hex Key Set

0.6

9 PIECE METRIC FOLDING HEX KEY WRENCH SET • Contains: 1.5, 2, 2.5, 3, 4, 4.5, 5, 5.5, 6 mm. • Chrome plated steel case.

Shpg. Wt. (lbs.)

Part No.

Description

HKF9M

9 Piece Metric Folding Hex Key Set

0.6

8 PIECE TORKS FOLDING HEX KEY SET • Contains: T9, T10, T15, T20, T25, T27, T30, T40. • Chrome plated steel case.

158

Shpg. Wt. (lbs.)

Part No.

Description

HTF8

8 Piece Folding Torks Set

0.5

www.westwardtools.ca

W159-10.qxp

2/12/10

2:23 PM

Page 159

PLIERS, CUTTERS, SNIPS & KNIVES

Slip & Groove Joint Pliers . . . 161-162 Side Cutters . . . . . . . . . . . . . . . . 162 Needle Nose Pliers . . . . . . . . . . . 163 Linesman & End Cutter . . . . . 164-165 Miniature Pliers . . . . . . . . . . 166-167 Snap Ring Pliers . . . . . . . . . . . . . 168 Wire Strippers . . . . . . . . . . . 169-171 Insulated Pliers . . . . . . . . . . 172-173 Locking Pliers . . . . . . . . . . . 174-176 Tin Snips . . . . . . . . . . . . . . . 176-177 Shears & Cutters. . . . . . . . . . 178-179 Bolt Cutters . . . . . . . . . . . . . 179-180 Pipe & Tubing Cutters . . . . . . 180-181 Knives & Scrapers. . . . . . . . . 183-184

W160-10.qxp

2/9/10

9:20 AM

Page 160

PLIERS CONTRACTOR SERIES HIGH LEVERAGE LINESMAN'S PLIERS • High leverage pliers design and diamond serrated jaws. • Laser hardened cutting edges provide 30% longer life than induction hardened edges. • Cuts hardened wire, ACSR, bolts, screws and nails. • Double layered, dipped handles.

Part No.

Length (in.)

Shpg. Wt. (lbs.)

PL8HC

81⁄2

0.9

PL9HC

93⁄8

1.2

CONTRACTOR SERIES HIGH LEVERAGE LONG NOSE PLIERS • • • •

Cuts both solid and stranded copper wire. Diamond serrated-jaws. Double layer, dipped handles. Laser hardened cutting edges provide 30% longer life than induction hardened edges.

Part No.

Length (in.)

Shpg. Wt. (lbs.)

PN8HC

89⁄16

0.7

CONTRACTOR SERIES HIGH LEVERAGE DIAGONAL CUTTING PLIERS • Laser hardened cutting edges provide 30% longer life than induction hardened edges. • Cuts most hardened wire, ACSR, bolts, screws and nails. • Dual cutting edges. • Double layered, dipped handles.

Part No. PD8HC PDA8HC

Type

Length (in.)

Shpg. Wt. (lbs.)

Straight

83⁄4

0.9

Bent

83⁄4

0.9

CONTRACTOR SERIES CRIMPER/WIRE CUTTTER • For insulated and non-insulated terminals (#10-22 AWG). • Tapered nose with wire cutter. • Double layer, dipped handles.

Part No. PC9HC

160

Length (in.)

Shpg. Wt. (lbs.)

0.4

www.westwardtools.ca

W161-10.qxp

2/9/10

9:30 AM

Page 161

PLIERS

5-PIECE HEAVY-DUTY PLIER SET • Includes 10" groove joint, 8" linesman, 8" slip-joint, 7" side cutter and 6" long nose. • Forged chrome nickel with storage tray.

Part No.

Description

PK5

5-Piece Set

Shpg. Wt. (lbs.) 2.2

5 PIECE PLIER SET Set contains 8" slip joint pliers, 10" groove joint pliers, 71⁄2" linesman’s pliers, 61⁄2" diagonal cutters, 61⁄2" long nose pliers with side cutters. Includes vinyl pouch.

Part No.

Description

SJK1

5 Piece Plier Set

Shpg. Wt. (lbs.) 3.0

PRO-SERIES SLIP JOINT PLIERS • Chrome nickel steel drop forged provides 30% longer life than chrome vanadium. • Ergonomic dual molded handles provide comfort and a more positive grip. • Two position adjustment with serrated jaws.

Part No.

Length Jaw Length Jaw Width Jaw Thickness Shpg. Wt. (in.) (in.) (in.) (in.) (lbs.)

PS6H

63⁄8

1.4

1.0

0.40

0.4

PS8H

81⁄4

1.7

1.34

0.43

0.7

SLIP JOINT PLIERS • Chrome vanadium steel drop forged. • 2 position adjustment. • Serrated jaws.

Part No.

Length Jaw Length Jaw Width Jaw Thickness Shpg. Wt. (in.) (in.) (in.) (in.) (lbs.)

500-6

1.16

0.36

0.3

500-8

1.36

1.28

0.36

0.4

500-10

1.75

1.44

0.36

0.5

www.westwardtools.ca

161

W162-10.qxp

2/9/10

9:30 AM

Page 162

PLIERS TONGUE & GROOVE PLIERS • Chrome vanadium drop forged. • Wide range of jaw adjustments can be used.

Jaw Length Length (in.) Part No. (in.)

Maximum Jaw Thickness Jaw Opening No. of (in.) Grooves (in.)

Shpg. Wt. (lbs.)

510-8

1.0

0.36

1.18

0.5

510-10

1.34

0.38

1.85

0.9

510-12

1.48

0.44

1.97

1.8

510-16

2.22

0.56

4.1

3.1

510-20

3.13

0.64

5.6

3.8

PRO-SERIES TONGUE & GROOVE PLIERS • Chrome nickel steel drop forged, provides 30% longer life than chrome vanadium. • Wide range of jaw adjustments can be used. • Ergonomic dual molded handles provide comfort and a more positive grip.

Maximum Jaw Jaw Length Length Thickness Jaw Opening No. of (in.) Grooves (in.) (in.) Part No. (in.)

Shpg. Wt. (lbs.)

PG10H

1.34

0.4

1.8

0.9

PG12H

1.8

0.5

2.0

1.3

PRO-SERIES HIGH-LEVERAGE HEAVY-DUTY DIAGONAL CUTTERS • Chrome nickel steel drop forged, induction hardened cutting edges provide 30% longer life than chrome vanadium. • High-leverage design provides greater cutting and gripping power than regular cutters. • Ergonomic dual molded handles provide comfort and a more positive grip. • Spring loaded for easier operation.

Length Part No. (in.)

Jaw Length (in.)

Jaw Width (in.)

Shpg. Jaw Thickness Wt. (lbs.) (in.)

PD6H

61⁄4

0.80

0.81

0.1

0.4

PD7H

0.83

1.13

0.13

0.5

DIAGONAL PLIERS Length Part No. (in.)

162

Jaw Length (in.)

Jaw Width (in.)

Shpg. Jaw Thickness Wt. (lbs.) (in.)

SJ603V

61⁄4

0.85

0.74

0.1

0.4

SJ605V

71⁄2

0.9

0.75

0.1

0.5

www.westwardtools.ca

W163-10.qxp

2/9/10

9:32 AM

Page 163

PLIERS PRO-SERIES HIGH LEVERAGE LONG NOSE PLIERS • Chrome nickel steel drop forged induction hardened cutting edges provide 30% longer life than chrome vanadium. • High leverage design provides greater cutting and gripping power than regular cutters. • Ergonomic dual molded handles provide comfort and a more positive grip. • Spring loaded for easier operation.

Part No.

Length (in.)

Jaw Length (in.)

Jaw Thickness (in.)

Jaw Width (in.)

Tip Width (in.)

Tip Thickness (in.)

Shpg. Wt. (lbs.)

PN6H

61⁄4

1.87

0.7

0.4

0.13

0.1

0.5

PN8H

2.36

0.9

0.46

0.13

0.7

PRO-SERIES HIGH LEVERAGE BENT NOSE PLIERS • Chrome nickel steel drop forged induction hardened cutting edges provide 30% longer life than chrome vanadium. • High leverage design provides greater cutting and gripping power then regular cutters. • Ergonomical dual molded handles provide comfort and a more positive grip. • Spring loaded for easier operation.

Jaw Length Width (in.) Part No. (in.)

Tip Jaw Thickness Tip Width Thickness Shpg. Wt. (in.) (lbs.) (in.) (in.)

PNB6H

61⁄4

1.87

0.40

0.13

0.1

0.5

PNB8H

2.36

0.46

0.13

0.8

LONG NOSE PLIERS • Chrome vanadium drop forged. • Serrated jaws for positive grip. • Plastic dipped handles for comfort.

Jaw Length Length (in.) Part No. (in.)

Shpg. Tip Tip Jaw Jaw Width Thickness Width Thickness Wt. (lbs.) (in.) (in.) (in.) (in.)

SJ606V

61⁄4

2.0

0.73

0.4

0.13

0.1

0.4

SJ607V

2.5

0.85

0.45

0.13

0.1

0.5

LONG REACH NEEDLE NOSE PLIERS • Unique long handle makes access to confined, restricted areas easier. • Design allows for equal amount of pressure along the jaw, including the tip, with less effort. • Chrome vanadium drop forged.

Jaw Jaw Jaw Tip Tip Shpg. Length Length Width Thickness Width Thickness Wt. (in.) (in.) (in.) (in.) (in.) (lbs.) Part No. Type (in.) SJ614

Straight

2.4

0.7

0.4

0.19

0.11

0.7

SJ615

Bent

111⁄2

—

0.7

0.4

0.28

0.13

0.7

www.westwardtools.ca

163

W164-10.qxp

2/9/10

9:33 AM

Page 164

PLIERS PRO-SERIES HIGH-LEVERAGE LINESMAN'S PLIERS • Chrome nickel steel drop forged induction hardened cutting edges provide 30% longer life than chrome vanadium. • High-leverage design provides greater cutting and gripping power than regular cutters. • Ergonomic dual molded handles provide comfort and a more positive grip. • Spring loaded for easier operation.

Jaw Jaw Length Length Jaw Width Tip Width Thickness Shpg. Wt. (in.) (lbs.) (in.) (in.) (in.) Part No. (in.) PL7H

1.44

1.06

0.20

0.43

0.5

PL8H

1.68

1.24

0.25

0.56

0.8

LINESMAN’S PLIERS • Chrome vanadium drop forged. • Contoured plastic dipped handle for comfort.

Length Part No. (in.)

Jaw Jaw Length Jaw Width Tip Width Thickness Shpg. Wt. (in.) (lbs.) (in.) (in.) (in.)

SJ602V

1.22

0.93

0.24

0.50

0.6

SJ601V

1.32

1.05

0.30

0.54

0.8

PRO-SERIES HIGH LEVERAGE END CUTTING NIPPERS • Chrome nickel steel drop forged induction hardened cutting edges provide 30% longer life than chrome vanadium. • High leverage design provides greater cutting and gripping power than regular cutters. • Ergonomic dual molded handles provide comfort and a more positive grip.

Length Part No. (in.)

Jaw Jaw Length Jaw Width Thickness (in.) (in.) (in.)

Shpg. Wt. (lbs.)

PE6H

61⁄4

0.27

1.46

0.94

0.6

PE8H

77⁄8

0.34

1.64

1.15

0.9

PRO-SERIES FENCE PLIERS • Chrome nickel drop forged with one side of the head designed to hammer and the other to dig. • Nail pulling feature on both sides of the head and 2 side cutters for soft wire. • Ergonomic co-molded handles for comfort and positive grip.

Length Part No. (in.) PF10H

164

101⁄4

Jaw Jaw Length Jaw Width Thickness (in.) (in.) (in.) 1.08

3.5

0.56

Shpg. Wt. (lbs.) 1.5

www.westwardtools.ca

W165-10.qxp

2/9/10

9:34 AM

Page 165

PLIERS

MIG HELPER Part No. Description W8

Shpg. Wt. (lbs.)

For Wire Feed Welders

0.7

DOUBLE-X PLIERS • • • •

Compound joint allows access with minimal handle movement. Jaws open greater distance than the handle for added reach in tight locations. Chrome vanadium alloy steel. Aligned serrated tips for precision gripping.

Length (in.)

Jaw Capacity (in.)

3 Piece Double-X Set

—

3.0

Straight

0.9

PN13DXA

45°

123⁄4

1.75

0.9

PN11DXD

Duck Bill

125⁄8

1.5

0.9

Part No. PK3DX PN13DX

Style

Shpg. Wt. (lbs.)

DOUBLE-X HOSE GRIP PLIERS • • • •

Hose Diameter (in.)

Shpg. Wt. (lbs.)

—

3.0 0.9

Part No.

Style

Length (in.)

PK3DXH

3 Piece Set

PH13DX10

Hose Grip

5⁄16

PH13DX16

Hose Grip

1⁄2

0.9

PH13DX24

Hose Grip

3⁄4

0.9

PRO-SERIES MINIATURE PLIER SET • Chrome nickel steel drop forged induction hardened cutting edges provide 30% longer life than chrome vanadium. • Ergonomic dual molded handles provide comfort and a more positive grip. • Spring loaded for easier operation. • Includes end cutter, diagonal, long nose, needle nose and bent nose pliers.

Part No.

Description

PK5M

5 Piece Miniature Plier Kit

www.westwardtools.ca

Shpg. Wt. (lbs.) 1.2

165

W166-10.qxp

2/9/10

9:35 AM

Page 166

PLIERS PRO-SERIES MINIATURE DIAGONAL PLIERS • Chrome nickel steel drop forged induction hardened cutting edges provide 30% longer life than chrome vanadium. • Ergonomic dual molded handles provide comfort and a more positive grip. • Spring loaded for easier operation.

Jaw Length Length (in.) Part No. (in.) PD4M

41⁄2

Jaw Width (in.)

0.53

Shpg. Wt. Jaw Thickness (in.) (lbs.)

0.51

0.32

0.2

PRO-SERIES MINIATURE NEEDLE NOSE PLIERS • Chrome nickel steel drop forged. • Ergonomic dual molded handles provide comfort and a more positive grip. • Spring loaded for easier operation.

Jaw Length Length (in.) Part No. (in.) PNN5M

51⁄2

1.65

Shpg. Tip Tip Jaw Jaw Width Thickness Width Thickness Wt. (lbs.) (in.) (in.) (in.) (in.) 0.50

0.32

0.13

0.04

0.2

PRO-SERIES MINIATURE END CUTTING NIPPERS • • • •

Chrome nickel steel drop forged. Induction hardened cutting edges provide 30% longer life then chrome vanadium. Ergonomic dual molded handles provide comfort and a more positive grip. Spring loaded for easier operation.

Jaw Length Length (in.) Part No. (in.) PE4M

41⁄4

Jaw Width (in.)

0.32

Shpg. Wt. Jaw Thickness (in.) (lbs.)

0.65

0.52

0.2

PRO-SERIES MINIATURE LONG NOSE PLIERS • • • •

Chrome nickel steel drop forged. Ergonomic dual molded handles provide comfort and a more positive grip. Spring loaded for easier operation. With serrated jaws.

Jaw Length Length (in.) Part No. (in.) PL5M

166

51⁄4

1.3

Shpg. Tip Tip Jaw Jaw Width Thickness Width Thickness Wt. (lbs.) (in.) (in.) (in.) (in.) 0.5

0.32

0.13

0.04

0.2

www.westwardtools.ca

W167-10.qxp

2/9/10

9:35 AM

Page 167

PLIERS PRO-SERIES MINIATURE BENT NOSE PLIERS • • • •

Chrome nickel steel drop forged. Ergonomic dual molded handles provide comfort and a more positive grip. Spring loaded for easier operation. 45° angled jaw.

Jaw Length Width (in.) Part No. (in.) PNB5M

47⁄8

Jaw Thickness (in.)

0.50

Shpg. Tip Tip Width Thickness Wt. (lbs.) (in.) (in.)

0.32

0.13

0.04

0.2

LARGE CAPACITY SNAP RING PLIER SET • • • • •

Contains: SJ622, SJ622A, SJ623 and SJ623A snap ring pliers. Designed for inserting and removing snap rings. With reverse tapered claw for stability. Chrome vanadium drop forged. Plastic dipped handles for comfort.

Part No.

Description

SJK4S

4 Piece Set

Shpg. Wt. (lbs.) 2.2

EXTERNAL SNAP RING PLIERS – STRAIGHT • • • • •

Designed for inserting and removing snap rings. With reverse tapered claw for stability. Chrome vanadium drop forged. Plastic dipped handles for comfort. Spring loaded.

Length Part No. (in.)

Jaw Length (in.)

Jaw Thickness (in.)

Ring Diameter (in.)

Tip Size Shpg. Wt. (in.) (lbs.)

SJ612

1.9

0.35

0.75 - 2.35

0.070

0.4

SJ622

91⁄2

2.2

0.38

1.6 - 3.9

0.090

0.5

INTERNAL SNAP RING PLIERS – STRAIGHT • • • •

Designed for inserting and removing snap rings. With reverse tapered claw for stability. Chrome vanadium drop forged. Plastic dipped handles for comfort.

Length Part No. (in.)

Jaw Length (in.)

Jaw Thickness (in.)

Ring Diameter (in.)

Tip Size Shpg. Wt. (in.) (lbs.)

SJ612A

1.9

0.35

0.75 - 2.35

0.070

0.2

SJ622A

91⁄2

2.0

0.38

1.6 - 3.9

0.090

0.2

www.westwardtools.ca

167

W168-10.qxp

2/9/10

9:36 AM

Page 168

PLIERS EXTERNAL SNAP RING PLIERS – BENT PATTERN • • • • •

Designed for inserting and removing snap rings. With reverse tapered claw for stability. Chrome vanadium drop forged. Plastic dipped handles for comfort. Spring loaded.

Length Part No. (in.)

Jaw Length (in.)

Jaw Thickness (in.)

Ring Diameter (in.)

Tip Size Shpg. Wt. (in.) (lbs.)

SJ613

63⁄4

1.5

0.35

0.75 - 2.35

0.070

0.2

SJ623

1.84

0.38

1.6 - 3.9

0.090

0.2

INTERNAL SNAP RING PLIERS – BENT PATTERN • • • •

Designed for inserting and removing snap rings. With reverse tapered claw for stability. Chrome vanadium drop forged. Plastic dipped handles for comfort.

Length Part No. (in.)

Jaw Length (in.)

Jaw Thickness (in.)

Ring Diameter (in.)

Tip Size Shpg. Wt. (in.) (lbs.)

SJ613A

1.5

0.35

0.75 - 2.35

0.070

0.2

SJ623A

1.6

0.38

1.6 - 3.9

0.090

0.2

COMBINATION INTERNAL – EXTERNAL SNAP RING PLIER KIT • • • •

Contains two straight heads 0.038" and 0.047". 45° head 0.047" and 90° head 0.047". Spring loaded handle with cushion grips. Each head can be mounted for internal or external use.

Part No.

Description

SJK4

4 Piece Set

Shpg. Wt. (lbs.) 0.5

STRAIGHT HEAD RETAINING RING PLIER KIT • Contains two straight tipped pliers with 0.70 and 0.047. • Plier length 73⁄4". • Plastic dipped handles for comfort and grip.

Part No.

Description

SJK2

2 Piece Set

Shpg. Wt. (lbs.) 0.6

45° HEAD RETAINING RING PLIER KIT • • • •

168

Contains two pliers with 45° angled heads. Tip sizes 0.070 and 0.047. Plastic dipped handles for comfort and grip. Length 73⁄4".

Part No.

Description

SJK2A

2 Piece Set

Shpg. Wt. (lbs.) 0.6

www.westwardtools.ca

W169-10.qxp

2/9/10

9:37 AM

Page 169

WIRE STRIPPERS AUTOMATIC WIRE STRIPPER Automatic stripper reduces user fatigue. Gripping mechanism holds wire securely while knife blades cut away insulation. Strips 10-22 AWG. Plastic coated handles provide comfort and grip.

Part No. STR23

Length (in.)

Shpg. Wt. (lbs.)

0.8

WIRE CUTTER & STRIPPER • • • •

Built-in wire cutters. For all types of wire 0.2 mm to 6 mm. Self adjusting for no damage to inner core. Blade pressure adjusting dial.

Part No.

Description

IMA317

Wire Cutter & Stripper

Shpg. Wt. (lbs.) 0.4

ALL PURPOSE WIRE STRIPPER & CRIMPER • Cuts and strips wire 10-20 gauge solid and 10-22 stranded wire. • For crimping solid, stranded and spliced wire. • Plastic handles for comfort and grip.

Part No. A2

Length (in.)

Shpg. Wt. (lbs.)

0.5

DELUXE TERMINAL KIT Handy wiring termination kit containing a crimping tool and wire cutter, wire stripper and cutter, an assortment of PVC terminal ends and 30' of 3⁄4" PVC electrical tape.

Part No.

Description

IMA201

Deluxe Terminal Kit

Shpg. Wt. (lbs.) 0.5

TERMINAL ASSORTMENT Electrical wiring termination kit containing 175 assorted PVC terminals. Includes 18 compartment at-a-glance carrying case.

Part No.

Description

AK3

Deluxe Terminal Asst. 175 Pieces

www.westwardtools.ca

Shpg. Wt. (lbs.) 0.5

169

W170-10.qxp

2/9/10

9:38 AM

Page 170

WIRE STRIPPERS PREMIUM WIRE STRIPPER/CUTTER – CURVED HANDLE • Strips wire 10 to 20 AWG. • Stripper gauges, cuts, strips, and loops wire. • Precision shear-type blades for clean cuts on solid and standard copper wire. • Cuts 6-32 and 8-32 screws. • Gauge markings on both sides and double-dipped curved handles to help reach into confined spaces. • Spring-loaded, self-opening action. • Strong-gripping serrated nose; for easy bending, shaping, and pulling of wire. • Closure lock.

Part No.

Length (in.)

Shpg. Wt. (lbs.)

71⁄8

0.8

STR3

PREMIUM WIRE STRIPPER/CUTTER – STRAIGHT HANDLE • Strips wire 10 to 20 AWG. • Narrow serrated plier jaws to pull, bend and loop wire. • Spring return and handle lock.

Part No.

Length (in.)

Shpg. Wt. (lbs.)

61⁄4

0.8

STR4

STAINLESS STEEL WIRE STRIPPER/CUTTER/CRIMPER • • • • •

Narrow serrated plier jaws to pull, bend, and loop wire. Strips 8 to 20 AWG solid wire. Strips 10 to 22 AWG stranded wire. Cuts bolts sizes 10-24, 10-32, 8-32, 6-32, 5-32 and 4-40. Two-part comfort grip handles.

Part No. STR6

Length (in.) Description 8

Shpg. Wt. (lbs.)

10 - 20 AWG

1.0

STAINLESS STEEL WIRE STRIPPER/CUTTER • • • •

Strips should wire 10 to 18 AWG. Strips standard wire 12 to 20 AWG. Cuts bolts 10-32, 8-32, and 6-32 with hold open spring. Narrow serrated plier jaws to bend, pull, and loop wire.

Part No. STR5

170

Length (in.)

Shpg. Wt. (lbs.)

63⁄4

0.9

www.westwardtools.ca

W171-10.qxp

2/9/10

9:39 AM

Page 171

INSULATED PLIERS

7-PIECE RATCHETING WIRE STRIPPER & CRIMPING TOOL KIT Includes interchangeable jaws for: • Non-insulated terminal. • Open barrel terminal. • Core-end terminal. • BNC connector. • Insulated terminal.

Part No.

Description

STR1

7-Piece Kit

Shpg. Wt. (lbs.) 5.1

PREMIUM WIRE STRIPPER/CRIMPER/CUTTER • Adjust micro swivel knob counter-clockwise to strip wire to 30 AWG (0.5 mm2) without damaging the inner cord. • Ergonomically designed TPR two component handles. • Steel construction provides durability and rust resistance. • Adjust to easily strip wire to various lengths. • Strips and cuts most kinds of 10 to 24 gauge (0.2 – 6 mm2). • Crimps 10 to 22 AWG (0.5 – 6 mm2) insulated terminals, 10 to 22 AWG non-insulated terminals and 7 to 8 mm ignition terminals.

Part No.

Description

Shpg. Wt. (lbs.)

STR2

Wire Stripper

1.0

INSULATED PLIER SET • Chrome vanadium drop forged induction hardened cutting edges. • Ergonomic dual molded handles provide comfort and a more positive grip. • 1,000 V certified to DIN EN60900. • Includes 8" long nose, linesman's and diagonal pliers as well as wire stripper in a pouch.

Part No.

Description

PK5E

5 Piece Set

Shpg. Wt. (lbs.) 2.5

INSULATED LONG NOSE PLIERS • Chrome vanadium drop forged induction hardened cutting edges. • Ergonomic dual molded handles provide comfort and a more positive grip. • 1,000 V certified to DIN EN60900. • With serrated jaws.

Part No.

Length (in.)

Shpg. Wt. (lbs.)

PN6E

0.3

PN8E

0.4

www.westwardtools.ca

171

W172-10.qxp

2/9/10

9:40 AM

Page 172

INSULATED PLIERS INSULATED HIGH LEVERAGE LONG NOSE PLIERS • Chrome vanadium drop forged induction hardened cutting edges. • Ergonomic dual molded handles provide comfort and a more positive grip. • 1,000 V certified to DIN EN60900. • High leverage design provides greater cutting and gripping power than regular cutters.

Part No. PNH8E

Length (in.)

Shpg. Wt. (lbs.)

0.6

INSULATED HIGH LEVERAGE LINESMAN'S PLIERS • Chrome vanadium drop forged induction hardened cutting edges. • Ergonomic dual molded handles provide comfort and a more positive grip. • 1,000 V certified to DIN EN60900. • High leverage design provides greater cutting and gripping power than regular cutters.

Part No. PLH7E

Length (in.)

Shpg. Wt. (lbs.)

0.5

INSULATED LINESMAN'S PLIERS • Chrome vanadium drop forged induction hardened cutting edges. • Ergonomic dual molded handles provide comfort and a more positive grip. • 1,000 V certified to DIN EN60900.

Part No. PL8E

Length (in.)

Shpg. Wt. (lbs.)

0.8

INSULATED DIAGONAL CUTTING PLIERS • Chrome vanadium drop forged induction hardened cutting edges. • Ergonomic dual molded handles provide comfort and a more positive grip. • 1,000 V certified to DIN EN60900.

Part No.

Length (in.)

Shpg. Wt. (lbs.)

PD6E

0.4

PD8E

0.6

INSULATED BENT NOSE PLIERS • Chrome vanadium drop forged induction hardened cutting edges. • Ergonomic dual molded handles provide comfort and a more positive grip. • 1,000 V certified to DIN EN60900. • With serrated jaws angled at 45°.

Part No.

172

Length (in.)

Shpg. Wt. (lbs.)

PNB6E

0.3

PNB8E

0.4

www.westwardtools.ca

W173-10.qxp

2/9/10

9:40 AM

Page 173

LOCKING PLIERS INSULATED V-SHAPED WIRE STRIPPERS • Chrome vanadium drop forged induction hardened cutting edges. • Ergonomic dual molded handles provide comfort and a more positive grip. • 1,000 V certified to DIN EN60900. • Adjusting screw for setting depth.

Part No.

Length (in.)

Shpg. Wt. (lbs.)

0.4

PW6E

INSULATED WATER PUMP PLIERS • Chrome vanadium drop forged. • Ergonomic dual molded handles provide comfort and a more positive grip. • 1,000 V certified to DIN EN60900. • Box joint.

Part No.

Length (in.)

Shpg. Wt. (lbs.)

0.9

PB10E

CURVED JAW LOCKING PLIERS WITH WIRE CUTTER Hardened tooth curved jaw can be used to grip a variety of shapes for tightening, clamping or twisting. Comes with a built in wire cutter.

Part No.

Length (in.)

Jaw Style

Shpg. Wt. (lbs.)

LWC7

Curved

0.5

LWC10

Curved

1.4

STRAIGHT JAW LOCKING PLIERS Straight jaws allow for a more positive contact on flat square or hex surfaces. Commonly used in welding and other metal working applications.

Part No.

Length (in.)

Jaw Style

Shpg. Wt. (lbs.)

LWR5

Straight

0.7

LWR7

Straight

0.9

LWR10

Straight

1.4

www.westwardtools.ca

173

W174-10.qxp

2/9/10

9:41 AM

Page 174

LOCKING PLIERS

LOCKING C-CLAMP PLIERS – SWIVEL PAD 33⁄4" jaw opening provides for use in clamping a variety of shapes. Swivel pads add versatility. Nickel plated finish.

Part No.

Length (in.)

Jaw Style

Shpg. Wt. (lbs.)

LWC11

C-Clamp

1.8

LWC24

C-Clamp

3.8

LOCKING C-CLAMP PLIERS – FIXED PAD • Non-swivel jaw. • Chrome-moly handle. • Nickel chrome plating.

Part No.

Length (in.)

Jaw Style

Shpg. Wt. (lbs.)

LWC6F

Fixed

0.7

LWC11F

Fixed

1.8

LWC18F

Fixed

3.2

LWC24F

Fixed

4.1

CHAIN CLAMP LOCKING PLIERS For clamping and holding all shapes and sizes. Quick adjusting.

Part No. LWC19

Length (in.)

Chain Length (in.)

Shpg. Wt. (lbs.)

1.8

LONG NOSE LOCKING PLIERS WITH WIRE CUTTER Long straight nose provides access in hard to reach places. Built in wire cutter.

Length (in.)

Jaw Style

Shpg. Wt. (lbs.)

LWN6

Long Nose

0.5

LWN9

Long Nose

0.8

Part No.

174

www.westwardtools.ca

W175-10.qxp

2/9/10

9:42 AM

Page 175

LOCKING PLIERS

WELDERS CLAMP LOCKING PLIERS Length (in.)

Jaw Style

Shpg. Wt. (lbs.)

LWW9

V-Shaped

1.5

LWW11

V-Shaped

1.8

Part No.

PINCH-OFF LOCKING PLIER Part No. LWP7

Length (in.)

Jaw Style

Shpg. Wt. (lbs.)

Pinch-Off

0.8

SHEET METAL LOCKING PLIERS For bending, forming and crimping.

Length (in.)

Jaw Style

Shpg. Wt. (lbs.)

LWS8

Wide

1.1

LWS10

Wide

1.5

Length (in.)

Jaw Style

Shpg. Wt. (lbs.)

LWH7

Hex Grip

0.9

LWH10

Hex Grip

1.4

Part No.

LOCKING PLIERS • Ideal for hex fasteners. • Use on inch or metric.

Part No.

www.westwardtools.ca

175

W176-10.qxp

2/12/10

2:33 PM

Page 176

LOCKING PLIERS

LARGE JAW LOCKING PLIERS Multiple jaw configurations in one tool. Ideal for clamping and holding larger objects as well as use with more standard sizes.

Part No.

Length (in.)

Jaw Style

Shpg. Wt. (lbs.)

LWM10

Multi-Jaw

1.4

7 PIECE LOCKING PLIERS SET • • • • • • •

5" Curved Jaw Locking Pliers. 10" Curved Jaw Locking Pliers. 6" Long Nose Locking Pliers. 9" Long Nose Locking Pliers. 7" Pinch-Off Locking Pliers. 10" Straight Jaw Locking Pliers. 11" Locking C-Clamp.

Part No.

Description

LWK7

7 Piece Set

Shpg. Wt. (lbs.) 6.4

AVIATION STYLE TIN SNIPS • Non-slip serrated jaws. • Self opening for easy feed. • Colour coded handles for easy identification.

176

Part No.

Length (in.)

Handle Colour

Cutting Direction

Capacity

Shpg. Wt. (lbs.)

TS10SY

Yellow

Straight

18 Gauge

0.9

TS10LR

Red

Left

18 Gauge

0.9

TS10RG

Green

Right

18 Gauge

0.9

www.westwardtools.ca

W177-10.qxp

2/9/10

9:44 AM

Page 177

SNIPS

AVIATION STYLE TIN SNIP SET • Contains one each of left, right, and straight tin snip. • Colour coded handles for easy identification. • In a vinyl roll pouch.

Part No.

Description

TS10K

3 Piece Set

Shpg. Wt. (lbs.) 2.9

OFFSET AVIATION STYLE TIN SNIPS • • • •

Offset blades keep hands clear of metal. Non-slip serrated jaws. Self opening for easy feed. Colour coded handles for easy identification.

Part No.

Length (in.)

TSF10LR

TSF10RG

Handle Colour

Cutting Direction

Capacity

Shpg. Wt. (lbs.)

Red

Left

18 Gauge

0.9

Green

Right

18 Gauge

0.9

OFFSET AVIATION STYLE TIN SNIP SET Contains left and right cut offset snips in a vinyl roll pouch.

Part No.

Description

TSF10K

2 Piece Set

Shpg. Wt. (lbs.) 1.9

DUCKBILL TIN SNIPS • Cushion grip handles for comfort. • For straight, left and right cuts.

Length (in.)

Cut Length (in.)

Capacity

Shpg. Wt. (lbs.)

TSD10

21⁄8

21 Gauge

0.9

TSD13

27⁄8

23 Gauge

1.8

Part No.

www.westwardtools.ca

177

W178-10.qxp

2/9/10

9:44 AM

Page 178

SNIPS HEAVY-DUTY SHEARS • Stainless steel blades precision ground and hardened for long lasting sharp edges. • Adjustable knife-edge. • Ergonomic handle made from TPE (thermo plastic elastomer). • Extended tang for increased durability. • Designed for both right and left hand users.

Part No.

Length (in.)

Shpg. Wt. (lbs.)

91⁄4

0.5

SHD39

93⁄4" HEAVY-DUTY SHEARS • For shearing; thick cloth, upholstery, leather, rubber, fabric, rope, and much more. • Serrated blade. • Stainless steel blade. • Designed for both right and left hand users.

Part No. SHD10

Overall Length (in.)

Cutting Length (in.)

Shpg. Wt. (lbs.)

9.57

4.33

0.6

PRECISION SHEARS • High carbon stainless steel blade with vanadium and molybdenum. • Precision hollow ground and hardened blade for long lasting sharp edges. • One serrated blade reduces slippage. • Ergonomic design, molded handles from ZYTEL with 30% fiberglass. • Designed for both right and left handed users. • Ideal for cutting: soft cable, insulating materials, electrical tape, cable ties.

Part No. SHE35

Length (in.)

Shpg. Wt. (lbs.)

53⁄4

0.2

51⁄2" PRECISION KEVLAR® SHEARS • Ideal for shearing: • Kevlar® materials. • Insulation materials. • Electrical tape. • And much more. • Serrated blade. • High carbon alloy steel blade.

178

Part No.

Overall Length (in.)

Cutting Length (in.)

Shpg. Wt. (lbs.)

SHE35K

51⁄2

15⁄8

0.2

www.westwardtools.ca

W179-10.qxp

2/9/10

9:45 AM

Page 179

BOLT CUTTERS MULTI-PURPOSE ANGLED SHEARS WITH WIRE CUTTING NOTCH • For shearing: • Wood sticks. • Dowel rods. • Cardboard. • Rope. • Cord. • And much more. • Serrated blade. • Soft grip. • Adjustable handle width. • Stainless steel blade.

Part No.

Overall Cutting Length (in.) Length (in.)

SHM37A

Type

Shpg. Wt. (lbs.)

Offset

0.2

MULTI-PURPOSE SHEARS • Stainless steel blades precision ground and hardened for long lasting sharp edges. • Serrated jaw reduces slippage and increases leverage. • Designed for both right and left hand users.

Part No.

Length (in.)

Shpg. Wt. (lbs.)

SHM37

71⁄2

0.2

“HIT” BRAND INDUSTRIAL BOLT CUTTERS • Specially heat treated jaws for resilience are used for cutting bolts, rods, wire and synthetic materials. • Center cut designed jaws.

Part No.

Length (in.)

Rod and Bolt Size

NBC300

3⁄16"

NBC300JH

2.1

NBC350

1⁄4"

NBC350JH

2.9

NBC450

5⁄16"

NBC450JH

3.7

NBC600

3⁄8"

NBC600JH

6.2

NBC750

1⁄2"

NBC750JH

9.5

NBC900

5⁄8"

NBC900JH

15.0

3⁄4"

NBC1050JH

18.0

NBC1050

Replacement Shpg. Wt. Heads (lbs.)

“HIT” BRAND HIGH TENSILE BOLT CUTTERS • Specially heat treated jaws. • Center cut designed jaws. • For steel rods, cold drawn alloy steel and tempered spring wire.

Part No. NBC600HT

Length Rod and Replacement Shpg. Wt. (in.) Bolt Size Heads (lbs.) 24

3⁄8"

NBC750HT

1⁄2"

NBC750JH-HT

10.0

NBC900HT

5⁄8"

NBC900JH-HT

15.0

NBC1050HT

3⁄4"

NBC1050JH-HT

19.0

www.westwardtools.ca

NBC600JH-HT

6.2

179

W180-10.qxp

2/9/10

9:46 AM

Page 180

TUBING TOOLS ECONOMY BOLT CUTTERS • Drop forged jaws. • Economical alternative for general purpose cutting of bolts, mild steel rods, single stranded wires and synthetics.

Part No.

Length Rod and Replacement Shpg. Wt. (in.) Bolt Size Heads (lbs.)

BC8

5⁄32"

BC12

3⁄16"

—

0.6

BC12JH

2.1

BC14

1⁄4"

BC14JH

2.7

BC18

5⁄16"

BC18JH

4.2

BC24

3⁄8"

BC24JH

6.2

BC30

1⁄2"

BC30JH

9.5

BC36

5⁄8"

BC36JH

15.0

MINI TUBING CUTTER • Cuts copper, brass, aluminum and thin wall steel conduit. • For use in restricted spaces. • Knurled feed screw knob allows for easy control of cutting pressure.

Part No.

Description

Shpg. Wt. (lbs.)

716

5⁄8"

716W

Replacement Wheel

0.1

716PIN

Replacement Pin

0.1

Mini Tubing Cutter

0.2

FULL CAPACITY MINI TUBE CUTTER • For use in tighter locations where full size cutter will not fit. • Cast aluminum body with comfort grip design. • Regular size cutting wheel for copper, brass, aluminum and thin wall conduit.

Part No.

Capacity (in.)

717

1⁄8

11⁄8

Shpg. Wt. (lbs.) 0.5

TUBE CUTTING SET • Includes mini cutter, fullsize cutter and full capacity mini cutter. • Aluminum cast bodies. • For copper, aluminum, brass and thin wall conduit.

Part No.

Description

TCK3

3 Piece Set

Shpg. Wt. (lbs.) 1.4

TUBING CUTTER • For copper, brass, aluminum and steel conduit. • Enclosed feed screw helps eliminate jamming and clogging. • Sturdy alloy frame and fold away reamer.

180

Part No.

Description

734

11⁄4"

Shpg. Wt. (lbs.)

734W

Replacement Wheel

0.1

734P

Replacement Pin

0.1

Telescopic Tubing Cutter

0.7

www.westwardtools.ca

W181-10.qxp

2/9/10

9:47 AM

Page 181

TUBING TOOLS QUICK ACTING TUBE CUTTERS • • • •

Aluminum alloy body. Quick acting release design. Includes removable deburring reamer. Spare wheel stored in handle.

Part No.

Capacity (in.)

Shpg. Wt. (lbs.)

733

3⁄16

- 11⁄4

0.7

735

1⁄4

25⁄8

2.3

MULTI-PURPOSE CUTTING PLIERS Ideal for rubber or plastic hose (up to 11⁄8" O.D.), and light utility cable applications.

Part No. Description

Shpg. Wt. (lbs.)

Multi-Purpose Cutting Pliers with Blade

1.2

C1B

Replacement Blade For C1

0.1

HEAVY-DUTY PIPE CUTTER Cuts copper, brass, aluminum tubing, thin wall conduit, steel and iron pipe. Heavy-duty forged body, extra long screw adjusts quickly. Two-wheel design is fast and effective. Capacity: 1⁄8" to 2" pipe.

Part No. Description 701-2

2" Pipe Cutter

701-2W Cutter Wheel/701-2

Shpg. Wt. (lbs.) 8.0 0.1

PLIER – FLARING TOOL Quick release plier handle holds tubing securely while cone self centers over tubing. The quick release allows tubing to be inserted and removed easily. This tool is ideal for use in confined spaces. All steel construction provides industrial quality.

Part No. 492

Capacity (in.)

Shpg. Wt. (lbs.)

3⁄16, 1⁄4, 5⁄16, 3⁄8, 1⁄2, 5⁄8

2.8

www.westwardtools.ca

181

W182-10.qxp

2/9/10

9:47 AM

Page 182

TUBING TOOLS

DOUBLE FLARING TOOL KIT Includes: tubing clamp 3⁄16" – 5⁄8"; flaring tool; adapters 3⁄16", 1⁄4", 5⁄16", 3⁄8", 7⁄16", 1⁄2", 5⁄8"; telescopic tubing cutter; high impact case.

Part No.

Description

495

3⁄16"

Shpg. Wt. (lbs.)

5⁄8"

4.0

9 PIECE I.S.O. FLARING TOOL KIT Includes sizes 4375 mm, 6 mm, 8 mm, and 10 mm.

Part No.

Description

496

9 Piece Kit

Shpg. Wt. (lbs.) 1.2

TUBE BENDER • Bends soft tubing from 3⁄8" – 1⁄2" without kinking. • Bends up to 180°. • Corrosion resistant zinc plated steel.

Part No. 487

Capacity (in.) 3⁄8

- 1⁄2

Shpg. Wt. (lbs.) 0.5

3 SIZE TUBE BENDER • Bends 3 sizes of soft tubing. • Compact design allows for easy operation in confined areas. • Calibrated markings for quick reference.

Part No. 485

Capacity (in.)

Shpg. Wt. (lbs.)

1⁄4, 5⁄16, 3⁄8

1.0

4 SIZE TUBE BENDER • Bends 4 sizes of soft tubing. • Zinc plated finish will not rust.

Part No. 486

182

Capacity (in.)

Shpg. Wt. (lbs.)

3⁄16, 1⁄4, 5⁄16, 3⁄8

0.6

www.westwardtools.ca

W183-10.qxp

2/9/10

9:48 AM

Page 183

KNIVES & SCRAPERS AUTO-LOCK UTILITY KNIFE Part No. Description L650

Shpg. Wt. (lbs.)

With 2 Blades and Blade Snapper

0.2

UTILITY KNIFE WITH THUMB SCREW LOCK Part No. Description L500

Shpg. Wt. (lbs.)

With Built-In Blade Snapper

0.2

AUTO-LOAD UTILITY KNIFE • No need to open knife to change blade. • Safety thumb lock.

Part No. Description L750

Shpg. Wt. (lbs.)

With 6 Blades

0.2

MINI UTILITY KNIFE Part No. Description L300

Shpg. Wt. (lbs.)

With Auto-Lock Blade Slide

0.1

ABS UTILITY KNIVES Part No. Description

Shpg. Wt. (lbs.)

KU18A

18 mm Blade

0.2

KU9A

9 mm Blade

0.1

REPLACEMENT BLADES Blades Shpg. Wt. Per Pack (lbs.)

Part No.

Description

L300B

For L300, KU9A

0.1

L500B

For L500, L650, L750, KU18A

0.1

L750B

For L500, L650, L750, KU18A

0.2

www.westwardtools.ca

183

W184-10.qxp

2/9/10

9:49 AM

Page 184

KNIVES & SCRAPERS RETRACTABLE UTILITY KNIFE Part No.

Description

Shpg. Wt. (lbs.)

RK1

Retractable Utility Knife Complete with Blade

0.3

UTILITY KNIFE REPLACEMENT BLADES Part No.

Description

RKB1

16 Blades Per Pack

Shpg. Wt. (lbs.) 0.1

RETRACTABLE BLADE SCRAPERS • Metal body. • Positive lock system. • Replaceable single-edged razor blade.

Part No.

Description

Shpg. Wt. (lbs.)

RB1

Knife with 5 Blades

0.2

RB2

Replacement Blades (5 Pack)

0.1

RB3

Replacement Blades (100 Pack)

0.4

LOCKING BLADE KNIVES • Stainless steel blades. • Wood accent handle. • Spear point blade locks open.

Part No.

Blade Length (in.)

Shpg. Wt. (lbs.)

KL2W

21⁄2

0.2

KL3W

31⁄4

0.3

KL4W

0.4

PUTTY KNIVES • Quality steel blades in either flexible or stiff style. • Durable impact resistant plastic handles. • Solvent resistant.

Part No.

Description

Size (in.)

Shpg. Wt. (lbs.)

PK114F

Flex

11⁄4

0.2

Stiff

11⁄4

0.2

PK112F

Flex

11⁄2

0.2

PK112S

Stiff

11⁄2

0.2

PK2F

Flex

0.2

PK2S

Stiff

0.2

PK3F

Flex

0.2

PK3S

Stiff

0.2

PK4F

Flex

0.3

PK5F

Flex

0.3

PK114S

184

www.westwardtools.ca

W185-10.qxp

2/12/10

2:35 PM

Page 185

STRIKING TOOLS

Ball Pein Hammers . . . . . . . . . . . 186 Claw Hammers . . . . . . . . . . . . . . 187 Mallets . . . . . . . . . . . . . . . . . . . 188 Sledge Hammers . . . . . . . . . 188-189 Punches & Chisels . . . . . . . . 191-195 Gasket Scrapers . . . . . . . . . . . . . 196 Scribers & Picks . . . . . . . . . . 196-197 Pry Bar Sets . . . . . . . . . . . . . . . . 198 Aligning Bars . . . . . . . . . . . . 198-200 Clamps . . . . . . . . . . . . . . . . 200-201 Vises . . . . . . . . . . . . . . . . . . . . . 202 Brushes . . . . . . . . . . . . . . . . 203-204 Files . . . . . . . . . . . . . . . . . . 205-206

W186-10.qxp

2/9/10

9:29 AM

Page 186

HAMMERS WOOD HANDLE BALL PEIN HAMMERS • Forged steel heads, hardened, and tempered. • Hickory handles with varnished coat. • Chamfer head with polished face and pein.

Part No.

Size

Overall Length (in.)

Shpg. Wt. (lbs.)

7108

8 oz.

121⁄2

0.9

7112

12 oz.

1.0

7116

16 oz.

1.4

7124

24 oz.

1.9

7132

32 oz.

2.4

7140

40 oz.

3.1

7148

48 oz.

3.6

BALL PEIN REPLACEMENT HANDLES Varnish coated hickory handles.

Part No.

Description

Handle Type

Shpg. Wt. (lbs.)

7108H 7116H

For 7108

Hickory

0.5

7124H

For 7112 & 7116

Hickory

0.6

For 7124

Hickory

0.6

7132H

For 7132

Hickory

0.7

7140H

For 7140

Hickory

0.8

7148H

For 7148

Hickory

0.9

FIBERGLASS HANDLE BALL PEIN HAMMERS • Fiberglass handle provides shock absorption and overstrike protection. • Comfort grips. • Forged steel heads, hardened and tempered.

Part No.

Size

Overall Length (in.)

Shpg. Wt. (lbs.)

9108M

8 oz.

121⁄2

1.0

9116M

16 oz.

1.4

9124M

24 oz.

2.2

9132M

32 oz.

161⁄2

2.7

9140M

40 oz.

161⁄2

3.2

ALL STEEL BALL PEIN HAMMERS • One piece drop-forged construction. • Comfort grip handle reduces shock transmission. • Hardened and tempered heads.

186

Part No.

Size

Overall Length (in.)

Shpg. Wt. (lbs.)

9116MP

16 oz.

1.5

9124MP

24 oz.

2.0

www.westwardtools.ca

W187-10.qxp

2/12/10

2:36 PM

Page 187

HAMMERS CALIFORNIA FRAMING HAMMER • Hickory handle. • Forge and polished head.

Part No. 7025C

Size (oz.)

Length (in.)

Shpg. Wt. (lbs.)

171⁄2

2.1

FIBERGLASS RIPPING HAMMERS • Tempered and polished face. • Cushion grip.

Part No.

Size (oz.)

Shpg. Wt. (lbs.)

9516M

1.9

9520M

2.3

ONE PIECE CLAW HAMMER • One piece forge steel head and handle. • Rubber cushion grip for comfort. • Chamfered head with polished smooth face.

Part No.

Description

9020MP Curved Claw

Head Weight (oz.)

Overall Length (in.)

Shpg. Wt. (lbs.)

1.7

Overall Length (in.)

Shpg. Wt. (lbs.)

FIBERGLASS CLAW HAMMERS • Tempered and polished face. • Cushion grip handle. • Fiberglass handle for shock absorption.

Part No.

Description

Head Weight (oz.)

9016M

Curved Claw

1.6

9020M

Curved Claw

2.1

Shpg. Wt. (lbs.) 1.4

CLAW HAMMER • Tubular steel shaft. • Comfort grip. • Tempered head – smooth face.

Part No. 9001M

Head Weight (oz.)

Handle Type

Overall Length (in.)

Tubular Steel

www.westwardtools.ca

187

W188-10.qxp

2/12/10

2:36 PM

Page 188

HAMMERS RUBBER MALLETS • Black rubber heads reduce scratching or marring. • Ideal for wood working and shaping of soft metals. • Non-flaking head with hickory handle.

Part No.

Size (oz.)

Shpg. Wt. (lbs.)

RM16

1.3

RM24

1.8

RM32

2.3

DEAD BLOW HAMMERS • Shot filled head reduces bounce-back and handle vibration. • These non-marring faced hammers have no exposed metal parts. • Rubber handles provide a more positive grip.

Part No.

Head Weight (lbs.)

Head Dia. (in.)

Length (in.)

Shpg. Wt. (lbs.)

HD1

11⁄2

111⁄4

1.2

HD2

137⁄8

2.3

HD3

23⁄8

145⁄8

3.4

CLUB HAMMERS • Drop forged steel heads, hardened and tempered. • Machined faces. • Varnished hickory handles.

Part No. Head Weight (lbs.) Handle Type Handle Length (in.) Shpg. Wt. (lbs.) 9200

2.5

Hickory

2.8

9300

Hickory

3.3

9400

Hickory

4.4

DOUBLE FACE MACHINED SLEDGE HAMMERS • Forged steel head, hardened and tempered. • Varnished hickory handles. • Hammer faces are machine finished.

Part No.

188

Size (lbs.)

Handle Type

Handle Length (in.)

Shpg. Wt. (lbs.)

HS416

Hickory

4.5

HS636

Hickory

7.0

HS836

Hickory

9.5

HS1036

Hickory

11.1

HS1236

Hickory

13.5

www.westwardtools.ca

W189-10.qxp

2/12/10

2:39 PM

Page 189

HAMMERS WESTWARD UNBREAKABLE HANDLE SLEDGE HAMMERS NEVER REPLACE A SLEDGE HANDLE AGAIN!

Top Locking Plate

Tempered spring steel bars extend the length of the handle. The bars are riveted through a steel top plate which fits into a recess formed in the hammer head. Abrasive resistant rubber is molded around the entire handle. The heads are vulcanized to the handle during this operation. By using this method the rubber absorbs the impact forces generated during use. This reduces the shock waves being transmitted through the handle and also reduces fatigue at the point where the handle joins the head.

Unbreakable Handle Construction

Unbreakable Handle Sledge Hammers Direct Strike Test (14 lb. hammer) Number of blows before breaking or splintering Wood handle 435 Fiberglass handle 6,800 Westward Unbreakable Handle 25,000+ Overstrike Test (14 lb. hammer) Number of blows before breaking or splintering Wood handle 1st Overstrike Fiberglass handle 3,428 Overstrikes Westward Unbreakable Handle 25,000+ • Built for a lifetime of work – never replace a handle again due to this exclusive design. • Unbreakable handle reinforced with tempered steel surrounded by heavy-duty molded rubber. • Ergonomic handle absorbs shock, reduces fatigue and injuries while ensuring comfort with a slip-resistant grip. • High visibility green head adds instant identification under any job site condition; encourages safe work habits. • Outlasts wood and fiberglass handles by more than 18,000 blows.

Part No.

Head Weight (lbs.)

Handle Length (in.)

Shpg. Wt. (lbs.)

HSE2512

2.5

3.5

HSE412

5.0

HSE630

8.5

HSE824

10.0

HSE830

10.5

HSE1430

16.5

www.westwardtools.ca

189

W190-10.qxp

2/12/10

2:40 PM

Page 190

HAMMERS SOFT FACE HAMMERS • • • •

Plastic and rubber tips. Tubular steel shaft. Rubber grip for comfort. Replacement tips available.

Part No.

Size

Shpg. Wt. (lbs.)

HSF16

16 oz.

1.3

HSF24

24 oz.

1.9

REPLACEMENT TIPS FOR SOFT FACE HAMMERS Shpg. Wt. (lbs.)

Part No.

Description

HSF16PT

Plastic Replacement Tip for HSF16

0.2

HSF16RT

Rubber Replacement Tip for HSF16

0.2

HSF24PT

Plastic Replacement Tip for HSF24

0.3

HSF24RT

Rubber Replacement Tip for HSF24

0.3

CHIPPING HAMMER Features industry standard vertical chisel and pointed cone. Vertical chisel deflects debris away from welder, pointed cone aids in cleaning stubborn flux.

Part No. HW28

Shpg. Wt. (lbs.)

Description Welder’s Chipping Hammer with 3⁄4" Chisel End

0.8

ONE-PIECE ALL STEEL AXE • • • • • •

All steel polished handle is stronger than wood or fiberglass. 21⁄2 lbs. drop-forged steel head. Rust resistant for longer product life. Comfortable cushioned grip. Lightweight, 4 lbs. overall. Sheath included.

Part No. AX1

190

Length (in.) Head Weight (lbs.) 26

2.5

Shpg. Wt. (lbs.) 4.0

www.westwardtools.ca

W191-10.qxp

2/12/10

2:40 PM

Page 191

HAMMERS 25 PIECE PUNCH & CHISEL SET With vinyl pouch. Set consists of flat chisels 3⁄8", 1⁄2", 5⁄8", 3⁄4", 7⁄8", 1", 11⁄4", round nose chisel 1⁄4", pin punches 3⁄32", 1⁄8", 5⁄32", 3⁄16", 7⁄32", 1⁄4", solid punches 3⁄32", 1⁄8", 3⁄16", 7⁄32", 1⁄4", centre punches 3⁄8", 1⁄2", drift punches 1⁄8", 3⁄16", 1⁄4", prick punch 3⁄8".

Part No.

Description

Shpg. Wt. (lbs.)

WPC25R

25 Piece Set

9.2

14 PIECE PUNCH & CHISEL SET With vinyl pouch. Set consists of flat chisels 1⁄2", 5⁄8", 3⁄4", 7⁄8", 1", pin punches 3⁄32", 1⁄8", 3⁄16", 1⁄4", solid punches 5⁄32" x 3⁄8", 3⁄16", 5⁄32" x 1⁄2", 3⁄8", centre punches 3⁄8".

Part No.

Description

Shpg. Wt. (lbs.)

WPC14R

14 Piece Set

4.5

7 PIECE PUNCH & CHISEL SET With vinyl pouch. Set consists of flat chisels 1⁄2", 5⁄8", 3⁄4", solid punches 5⁄32", 3⁄16", pin punch 3⁄16", centre punch 3⁄8".

Part No.

Description

WPC7R

7 Piece Set

Shpg. Wt. (lbs.) 2.3

5 PIECE CHISEL SET With vinyl pouch. Set consists of flat chisels 1⁄2", 5⁄8", 3⁄4", 7⁄8", 1".

Part No.

Description

WC45LR

5 Piece Set

www.westwardtools.ca

Shpg. Wt. (lbs.) 3.0

191

W192-10.qxp

2/12/10

2:41 PM

Page 192

PUNCHES & CHISELS 8 PIECE PUNCH SET With vinyl pouch. Set consists of pin punches 1⁄8", 3⁄16", 1⁄4", solid punches 3⁄32", 1⁄8", 5⁄32", 3⁄16", prick punch 3⁄8".

Part No.

Description

WP8R

8 Piece Set

Shpg. Wt. (lbs.) 1.8

6 PIECE ROLL PIN PUNCH SET With vinyl pouch. Set consists of 3⁄32", 1⁄8", 5⁄32", 3⁄16", 1⁄4", 5⁄16".

Part No.

Description

WP6R

6 Piece Set

Shpg. Wt. (lbs.) 0.9

COLD CHISELS Part No.

Cut Width Stock (in.) Size (in.)

Length (in.)

Shpg. Wt. (lbs.)

WC1

3⁄8

0.2

WC2

1⁄2

3⁄8

0.3

WC3

5⁄8

1⁄2

0.4

WC4

3⁄4

5⁄8

0.6

WC4L

3⁄4

5⁄8

1.3

WC4XL

3⁄4

5⁄8

2.0

WC5

7⁄8

5⁄8

0.9

WC10

7⁄8

5⁄8

1.4

WC6

3⁄4

81⁄4

1.2

3⁄4

1.8

3⁄4

2.2

11⁄4

3⁄4

81⁄4

1.9

Stock Size (in.)

Length (in.)

Shpg. Wt. (lbs.)

WC34

3⁄8

0.2

WC35

1⁄2

0.3

WC6L WC6XL WC7

CENTER PUNCHES Part No.

192

www.westwardtools.ca

W193-10.qxp

2/12/10

2:43 PM

Page 193

PUNCHES & CHISELS SOLID PUNCHES Part No.

Tip Diameter Stock (in.) Size (in.)

Length (in.)

Shpg. Wt. (lbs.)

WC21

1⁄16

3⁄8

0.2

WC22

3⁄32

3⁄8

0.2

WC23

1⁄8

3⁄8

0.2

WC24

3⁄16

3⁄8

0.3

WC25

5⁄32

3⁄8

0.3

WC26

3⁄16

1⁄2

0.3

WC27A

5⁄16

1⁄2

0.4

WC37

5⁄32

1⁄2

0.9

WC38

3⁄8

5⁄8

1.0

WC49

7⁄32

1⁄2

0.4

WC50

1⁄4

1⁄2

61⁄2

0.3

Length (in.)

Shpg. Wt. (lbs.)

PIN PUNCHES Part No.

Tip Diameter Stock (in.) Size (in.)

WC27

3⁄32

3⁄8

0.1

WC28

1⁄8

3⁄8

0.1

WC80

1⁄8

5⁄32

0.2

WC28A

5⁄32

3⁄8

0.1

WC29

3⁄16

3⁄8

0.2

WC81

3⁄16

0.2

WC82

3⁄16

7⁄32

0.2

WC29A

7⁄32

1⁄2

0.3

WC30

1⁄4

1⁄2

0.3

WC83

1⁄4

0.2

WC31

9⁄32

1⁄2

0.4

WC84

5⁄16

0.2

WC60

3⁄8

3⁄4

81⁄2

1.2

WC51

1⁄2

5⁄8

91⁄2

1.0

Length (in.)

Shpg. Wt. (lbs.)

ALIGNMENT PUNCHES Part No.

Tip Diameter Stock (in.) Size (in.)

PA12

1⁄2

1.2

WC8385

1⁄4

3⁄4

0.9

WC8386

7⁄32

5⁄8

0.9

www.westwardtools.ca

193

W194-10.qxp

2/12/10

2:44 PM

Page 194

PUNCHES & CHISELS DRIFT PUNCHES Part No.

Tip Diameter Stock (in.) Size (in.)

Length (in.)

Shpg. Wt. (lbs.)

WC40

1⁄8

3⁄8

0.3

WC41

3⁄16

3⁄8

0.3

WC42

1⁄4

1⁄2

0.5

Length (in.)

Shpg. Wt. (lbs.)

0.2

Length (in.)

Shpg. Wt. (lbs.)

CAPE CHISEL Part No.

Cut Width Stock Size (in.) (in.)

WC18A

1⁄4

3⁄8

ROLL PIN PUNCHES Part No.

Tip Diameter Stock (in.) Size (in.)

PR3

3⁄32

1⁄4

31⁄2

0.1

PR4

1⁄8

1⁄4

33⁄4

0.1

PR5

5⁄32

5⁄16

41⁄2

0.1

PR6

3⁄16

5⁄16

41⁄2

0.1

PR8

1⁄4

3⁄8

51⁄2

0.2

PR10

5⁄16

3⁄8

0.2

Stock Size (in.)

Length (in.)

Shpg. Wt. (lbs.)

3⁄8

0.2

PRICK PUNCH Part No. WC32

ADJUSTABLE AUTOMATIC CENTER PUNCH The automatic center punch eliminates the need for striking the punch with a hammer. Precise means of punching center holes for drilling in layout works.

194

Dia. (in.)

Shpg. Wt. (lbs.)

Length 5.0"

0.157

0.2

Replacement Tip

0.157

0.1

Part No.

Description

YS1192 YS1192A

www.westwardtools.ca

W195-10.qxp

2/12/10

2:44 PM

Page 195

PUNCHES & CHISELS 7 PIECE HOLLOW PUNCH SET • For punching holes in leather, canvas, rubber, plastic and other materials. • Drop forged steel with side hole for removal of punched material. • Set includes 3⁄32", 1⁄8", 5⁄32", 3⁄16", 1⁄4", 5⁄16" and 3⁄8" punch.

Part No.

Description

A154

Hollow Punch Set

Shpg. Wt. (lbs.) 0.8

10 PIECE GASKET PUNCH SET • For punching holes in leather, rubber, cardboard, plastic, sheet metal and gasket material. • Includes 9 hardened alloy steel punches. • Sizes 1⁄4", 5⁄16", 3⁄8", 7⁄16", 1⁄2", 5⁄8", 3⁄4", 7⁄8" and 1". • Spring loaded self-centering mandrel. • In a molded plastic storage case.

Part No.

Description

Shpg. Wt. (lbs.)

PGK11

10 Piece Set

1.8

PUNCH & CHISEL HOLDER For added safety. Will hold chisels and punches up to 1" stock size.

Part No.

Length (in.)

Shpg. Wt. (lbs.)

81⁄2

0.6

HC1

3 PIECE WOOD CHISEL SET • • • •

Precision ground forged steel blades. Co-molded handles for grip and comfort. Steel striking cap for long life. Includes: 1⁄2", 3⁄4, and 1".

Part No.

Description

WC3K

3 Piece Chisel Set

2.4

WC3K12

1⁄2"

Chisel

0.5

WC3K34

3⁄4"

Chisel

0.7

WC3K1

1" Chisel

0.9

www.westwardtools.ca

Shpg. Wt. (lbs.)

195

W196-10.qxp

2/12/10

2:45 PM

Page 196

SCRAPERS & SCRIBES GASKET SCRAPER & REMOVER SET Includes 2 multi-purpose scrapers, scratch awl, cotter pin puller and radiator hose remover.

Part No.

Description

AK2

5 Piece Set

Shpg. Wt. (lbs.) 0.6

GASKET SCRAPERS • Hardened shafts and ends for durability. • For removing gaskets and carbon. • Comfortable square handles provides positive grip.

Part No.

Overall Length (in.)

Shpg. Wt. (lbs.)

1.0

81⁄4

0.8

SCRATCH AWL • Hardened ends for durability. • For scribing and etching as well as starting holes for screws and piercing soft materials.

Part No. A6

Overall Length (in.)

Shpg. Wt. (lbs.)

0.7

RADIATOR HOSE REMOVER • Hardened ends for durability. • Precision formed curves provide excellent leverage. • Comfortable square handles provides positive grip.

Part No. A8

196

Overall Length (in.)

Shpg. Wt. (lbs.)

61⁄2

0.8

www.westwardtools.ca

W197-10.qxp

2/12/10

2:46 PM

Page 197

SCRAPERS & SCRIBES COTTER PIN PULLER • Hardened ends for durability. • Provides excellent leverage for prying out cotter pins. • Comfortable square handles provides positive grip.

Part No.

Overall Length (in.)

Shpg. Wt. (lbs.)

0.9

SCRIBERS Part No.

Description

A18

7" with Unhardened Hook

Shpg. Wt. (lbs.) 0.1

A19

8" with Hardened 90° Hook

0.1

SCRATCH AWL • Alloy steel shaft with hardwood handle. • Designed for scribing and layout work, starting screw holes and piercing soft materials.

Part No.

Description

Shpg. Wt. (lbs.)

YS1190

5" Scratch Awl

0.3

PICK & HOOK SET With 5" aluminum handle. Set includes O-ring, 90 degree and straight pick plus hook. All are constructed of heat treated chrome vanadium steel.

Part No.

Description

AK1

5 Piece Set

www.westwardtools.ca

Shpg. Wt. (lbs.) 0.2

197

W198-10.qxp

2/12/10

2:46 PM

Page 198

PRY BARS ALIGNING BARS • Drop forged heat treated to resist bending and breaking. • Used for prying, positioning and aligning.

Part No.

Description

PB1

241⁄4”

Shpg. Wt. (lbs.)

Alignment Bar

0.9

PB3

173⁄4” Alignment Bar

2.4

ROLLING HEAD PRY BARS • Rolling head increases leverage and tapered end act as an aligning bar. • Drop forged heat-treated to resist bending and breaking.

Part No.

Length (in.)

Shpg. Wt. (lbs.)

171⁄2

2.5

PB2

ALUMINUM PRY BARS • • • • • •

Low sparking. Lightweight bars for prying, aligning and leverage. Tougher than steel bars. 1⁄3 lighter than steel bars. Less risk of damage to work piece. Less effort required.

Part No.

Length (in.)

Shpg. Wt. (lbs.)

F820

2.5

B1200

4.0

B1500

6.3

60 (Steel Tip)

8.0

B1500S

MECHANICS PRY BAR SET Set includes: 8", 12", 18", and 24" pry bars with molded handles.

Part No.

Description

PBK4

4 Piece Set

Shpg. Wt. (lbs.) 5.1

MECHANICS PRY BARS • Bent head pry bars. • Chrome vanadium steel. • With molded handles.

198

Part No.

Description

Size (in.)

PB8

Pry Bar with Handle

1⁄4

Shpg. Wt. (lbs.)

0.4

PB12

Pry Bar with Handle

3⁄8

x 12

0.6

PB18

Pry Bar with Handle

7⁄16

x 18

0.9

PB24

Pry Bar with Handle

7⁄16

x 24

1.4

www.westwardtools.ca

W199-10.qxp

2/12/10

2:48 PM

Page 199

PRY BARS IMPACT PRY BAR SET • Set includes: 8" bent pry bar, 12" forked pry bar, 18" elbow pry bar, and 24" extended pry bar. • Chrome vanadium steel. • Extended cap for added protection. • Go-thru handles for striking.

Part No.

Description

PBIK4

4 Piece Set

Shpg. Wt. (lbs.) 5.7

IMPACT PRY BARS Part No.

Description

Shpg. Wt. (lbs.)

PBI8

8" Bent Pry Bar

PBI12

12" Bent Fork Pry Bar

0.6

PBI18

18" Elbow Bent Pry Bar

0.9

PBI24

24" Striking Pry Bar

1.4

0.4

4 PIECE ROLLING HEAD PRY BAR SET • Set includes PB106H, PB1412H, PB1816H, and PB2220H. • Rolling head increases leverage and tapered body works as an aligning drift. • Variety of sizes for all applications.

Part No.

Description

PBK4H

4 Piece Pry Bar Set

Shpg. Wt. (lbs.) 6.5

ROLLING HEAD PRY BARS Part No.

Description

PB106H

5⁄16

Shpg. Wt. (lbs.)

x 6" Rolling Head Pry Bar

0.9

PB1412H

7⁄16

x 12" Rolling Head Pry Bar

1.3

PB1816H

9⁄16

x 16" Rolling Head Pry Bar

1.9

PB2220H

11⁄16

x 20" Rolling Head Pry Bar

2.2

CRATE TOOL • Beveled nail slot on both ends. • Ideal for pulling, prying, and lifting.

Part No.

Length (in.)

Shpg. Wt. (lbs.)

YS1185

1.1

www.westwardtools.ca

199

W200-10.qxp

2/12/10

2:49 PM

Page 200

PRY BARS INDEXING PRY BARS • Indexable 180° with 14 lock positions. • Exceeds ANSI requirements for strength.

Part No.

Description

PBX8

8" Smooth Profile

Shpg. Wt. (lbs.) 1.0

PBX10

10" Smooth Profile

1.3

PBX16

16" Smooth Profile

2.0

PBX24

24" Grooved Profile

3.1

PBX33

33" Grooved Profile

4.3

PBXK2S

Two Piece Set, 8 & 16"

3.2

EXTENDABLE INDEXING PRY BARS • • • •

Indexable to 180°. 14 locking positions. Push button lock to extend. Grooved profile for traction.

Shpg. Wt. (lbs.)

Part No.

Description

PBX29E

18 - 29" Extendable Grooved Profile

3.3

4-IN-1 UTILITY BAR • Co-molded comfort grips. • Tweaks, strips, wedges and pulls nails.

Part No.

Description

Shpg. Wt. (lbs.)

YS15

15", 4-in-1 Utility Bar

1.7

5-IN-1 UTILITY BAR • Co-molded comfort grips. • Use as a demolition hammer, splitting edge, and board bender. • Also used as a pry bar and nail puller.

200

Part No.

Description

Shpg. Wt. (lbs.)

YS18

18", 5-in-1 Utility Bar

2.2

www.westwardtools.ca

W201-10.qxp

2/12/10

2:49 PM

Page 201

CLAMPS INDUSTRIAL TYPE C-CLAMPS Industrial quality drop forged steel with brass forcing screw. Replacement parts available.

Opening Capacity (in.)

Throat Depth (in.)

Shpg. Wt. (lbs.)

11⁄8

1.8

11⁄2

2.3

4004

21⁄8

3.8

4005

23⁄16

4.5 5.5

Part No. 4002 4003

4006

25⁄8

4008

31⁄4

6.8

4010

41⁄8

10.0

4012

45⁄8

15.0

HEAVY-DUTY BAR CLAMP WITH FORGED PAD & HEX HEAD SCREW • Rail is made of cold drawn profiled steel which is precisely tempered and hardened. • Nickel chrome plating for high corrosion resistance. • Sliding arm is made from tempered and hardened drop forged steel. • Acme thread screw made from specially developed tool steel.

Part No.

Throat Depth (in.) Rail Size (in.) Max. Clamping Pressure (lbs.)

CB13S12

51⁄2

13⁄16 x 9⁄16

2,640

Max. Opening (in.)

Shpg. Wt. (lbs.)

6.7

Max. Opening (in.)

Shpg. Wt. (lbs.)

6.7

Max. Opening (in.)

Shpg. Wt. (lbs.)

6.7

HEAVY-DUTY BAR CLAMP WITH STANDARD SWIVEL • Rail is made of cold drawn profiled steel which is precisely tempered and hardened. • Nickel chrome plating for high corrosion resistance. • Sliding arm is made from tempered and hardened drop forged steel. • Acme thread screw made from specially developed tool steel.

Part No.

Throat Depth (in.) Rail Size (in.) Max. Clamping Pressure (lbs.)

CB1Q12

51⁄2

13⁄16

9⁄16

2,640

REGULAR-DUTY BAR CLAMP WITH STANDARD SWIVEL • Rail is made of cold drawn profiled steel which is precisely tempered and hardened. • Nickel chrome plating for high corrosion resistance. • Sliding arm is made from tempered and hardened drop forged steel. • Acme thread screw made from specially developed tool steel.

Part No.

Throat Depth (in.) Rail Size (in.) Max. Clamping Pressure (lbs.)

CB1S12 3⁄4"

51⁄2

1⁄2

1,430

PIPE CLAMP

• Ideal for woodworking. • Quick release thumb lever. • Malleable iron castings with baked enamel finish.

Part No. FC34

Pipe Diameter (in.) Throat Depth (in.) 3⁄4

www.westwardtools.ca

11⁄2

Shpg. Wt. (lbs.) 2.0

201

W202-10.qxp

2/12/10

2:50 PM

Page 202

CLAMPS & VISES TRIGGER CLAMPS/SPREADERS • • • •

Nylon/fiberglass body with comfort grips. One finger unlocks quick release trigger. Quick change to spreader. Soft “TPR” jaws.

Opening Capacity (in.)

Spreading Capacity (in.)

Throat Depth (in.)

Shpg. Wt. (lbs.)

61⁄2 - 14

31⁄4

1.6

CBT12

61⁄2

- 20

31⁄4

1.8

CBT18

61⁄2 - 26

31⁄4

2.4

CBT24

61⁄2 - 32

31⁄4

3.0

61⁄2

31⁄4

3.8

Part No. CBT6

CBT36

- 44

ALUMINUM/STEEL RATCHETING BAR CLAMPS • • • •

Aluminum alloy body with steel bar. High clamping pressure. Non-marring TPR pads firmly grip and protect the work piece. 80 mm throat depth.

Opening Capacity (in.)

Throat Depth (in.)

Shpg. Wt. (lbs.)

CBG8

1.7

CBG12

1.9

CBG18

2.6

Part No.

BENCH VISES All steel construction, 360° swivel base with positive lock. Built-in pipe jaw and anvil. • Heavy-duty castings for reliability and long life. • Precision main screw and nut for smooth operation and clamping strength. • Replaceable hardened jaw for reliable hold.

Part No.

Jaw Width (in.)

Jaw Opening (in.)

Shpg. Wt. (lbs.)

38.0

63.0

90.0

CROSS SLIDING VISES Rugged cast construction with hardened steel jaws. Ideal for two axis milling drill and grinding jobs. Side flange on base for easy mounting.

Jaw Part No. CV4

202

Width (in.)

Opening (in.)

Depth (in.)

13⁄8

51⁄4 6 61⁄8

CV5

11⁄2

CV6

19⁄16

Travel, Shpg. X x Y (in.) Wt. (lbs.) 61⁄2 x 5 71⁄2

61⁄2

8 x 71⁄2

31.0 43.0 60.0

www.westwardtools.ca

W203-10.qxp

2/12/10

2:51 PM

Page 203

BRUSHES KNOT TWISTED CUP BRUSHES • Knot-twisted for heavy-duty brushing like deburring, weld edge cleaning, removal of scale, spatter, heavy rust and corrosion. • Brushes feature Belgian wire for long brush life and uniform finishes. • Equipped with threaded arbors for quick and easy mounting.

Dia. (in.)

Arbor Size

Wire Size (in.)

Max. RPM

Type

Shpg. Wt. (lbs.)

WBC3

5⁄8"-11

0.014

12,000

Steel

0.6

WCB3SS2

5⁄8"-11

0.02

12,000

Stainless Steel

0.6

WCBS312

31⁄2

5⁄8"-11

0.020

12,000

Steel

0.7

Part No.

KNOT WIRE CUP BRUSH WITH SAFETY RING • • • •

Knot-twisted with safety supporting ring for heavy-duty brushing. Removes scale, beburrs, cleans welds and flat surfaces. These wire cup brushes are made from top quality Belgian wire for uniform finish. Specially designed for use on portable tools.

Part No.

Dia. (in.)

Arbor Wire Size Size (in.)

Max. RPM

WCB3R

5⁄8"-11

0.02

12,000

Steel

0.7

WCB3SS2

5⁄8"-11

0.02

12,000

Stainless Steel

0.6

WCB4R

5⁄8"-11

0.02

8,600

Steel

1.7

WCB5R

5⁄8"-11

0.02

8,600

Steel

2.2

WCB6R

5⁄8"-11

0.02

6,800

Steel

2.8

Type

Shpg. Wt. (lbs.)

Type

Shpg. Wt. (lbs.)

CRIMPED WIRE CUP BRUSHES • Excellent for light surface cleaning, rust and paint removal. • Equipped with threaded arbor for use on portable tools. • High quality Belgian wire.

Dia. (in.)

Arbor Size

Wire Size (in.)

23⁄4

5⁄8"-11

0.0140

14,000

Steel

0.6

WCB3C

5⁄8"-11

0.0118

12,000

Steel

0.6

WCB3CSS

5⁄8"-11

0.0118

12,000

Stainless Steel

0.6

Part No. WCBS234C

www.westwardtools.ca

Max. RPM

203

W204-10.qxp

2/12/10

2:51 PM

Page 204

BRUSHES STRINGER BEAD-KNOT-TWISTED WIRE WHEEL BRUSHES Stringer bead knots are tighter, more aggressive and fit into recessed areas. • Equipped with threaded arbors for quick and easy mounting. • Belgian wire for quality finishes and long brush life.

Part No.

Dia. (in.)

Arbor Wire Size Max. Size (in.) RPM

Type

Shpg. Wt. (lbs.)

Steel

0.8

WWB468SB

47⁄8

5⁄8"-11

0.020

WWB458SBSS

47⁄8

5⁄8"-11

0.020

12,000 Stainless Steel

0.8

5⁄8"-11

0.014

12,000

Steel

0.8

WWB578SB

57⁄8

5⁄8"-11

0.020

12,000

Steel

0.9

WWB578SBSS

57⁄8

5⁄8"-11

0.020

12,000 Stainless Steel

0.9

5⁄8"-11

0.020

12,000

Steel

1.1

61⁄2

5⁄8"-11

0.020

12,000

Steel

1.2

WWB5SB

WWB6SB WWB612SB

12,000

KNOT-TWISTED WIRE WHEEL BRUSHES • Knot-twisted brushes are for surface cleaning of rust, corrosion and after welding to remove scale and spatter. • Equipped with threaded arbors for quick and easy mounting. • Top quality Belgian wire for long wheel life and quality finishes.

Arbor Wire Size Max. Size (in.) RPM

Type

Shpg. Wt. (lbs.)

5⁄8"-11

0.014

20,000

Steel

0.6

WWB5

5⁄8"-11

0.020

12,000

Steel

0.8

WWB6

5⁄8"-11

0.020

9,000

Steel

1.0

Part No. WWB4

Dia. (in.)

SCRATCH BRUSHES Part No. WBS3B

WBS3SL

Overall Length (in.)

Wire Rows Fill Material

Shpg. Wt. (lbs.)

Small Cleaning Scratch Brushes WBS3B

85⁄8

3x7

Brass

0.2

WBS3

85⁄8

3x7

Steel

0.2

WBS3SS

85⁄8

3x7

Stainless Steel

0.2

Curved Handle Scratch Brushes

204

WBS3SL

133⁄4

3 x 19

Steel

0.4

WBS3SSL

133⁄4

3 x 19

Stainless Steel

0.4

WBS4SL

133⁄4

4 x 19

Steel

0.4

WBS4SSL

133⁄4

4 x 19

Stainless Steel

0.4

www.westwardtools.ca

W205-10.qxp

2/12/10

2:52 PM

Page 205

FILES MAINTENANCE FILE SET Includes 6" slim taper, 8" four in hand, 8" flat smooth, 8" half round bastard, 10" flat bastard, flat smooth half round bastard, mill bastard and round bastard files. • Complete selection to handle most maintenance projects. • Forged steel for durability.

Part No.

Description

FK9

9 Piece Set

Shpg. Wt. (lbs.) 4.0

GENERAL PURPOSE FILE SET Includes 6" slim taper, 8" smooth mill, 8" bastard mill, 10" bastard mill, and 10" half round bastard. • For smooth, rapid removal of metal. • Used for sharpening edges and shaping surfaces. • Forged steel construction for durability.

Part No.

Description

FK5

5 Piece Set

Shpg. Wt. (lbs.) 2.2

HALF ROUND BASTARD FILES • Rounded on one side, flat on the other. • Used on concave, convex or flat surfaces.

Part No.

Length (in.)

Shpg. Wt. (lbs.)

FHRB8

0.3

FHRB10

1.0

FLAT BASTARD FILES • For rapid removal of metal. • Rectangular in cross section. • Tapered slightly to a point.

Part No.

Length (in.)

Shpg. Wt. (lbs.)

FFB6

0.1

FFB8

0.3

FFB10

0.6

FFB12

1.9

Length (in.)

Shpg. Wt. (lbs.)

0.1

FFS8

0.3

FFS10

0.6

FFS12

1.8

FLAT SMOOTH FILES • For rapid removal of metal. • Rectangular in cross section. • Tapered slightly to a point.

Part No. FFS6

www.westwardtools.ca

205

W206-10.qxp

2/12/10

2:52 PM

Page 206

FILES

MILL BASTARD FILES

Part No.

• For sharpening mill or circular saws. • Also for finishing metals. • Tapered slightly in width.

MILL SMOOTH FILE

Part No.

• For sharpening mill or circular saws. • Also for finishing metals. • Tapered slightly in width.

Length (in.)

Shpg. Wt. (lbs.)

FMB8

0.3

FMB10

0.6

Length (in.)

Shpg. Wt. (lbs.)

0.2

Length (in.)

Shpg. Wt. (lbs.)

FMS8

ROUND BASTARD FILES

Part No.

• Used to file round openings or concave surfaces. • Tapered slightly to a point.

FRB6

0.1

FRB8

0.1

FRB10

0.3

FRB12

0.6

ROUND SMOOTH FILES

Part No.

Length (in.)

Shpg. Wt. (lbs.)

• Used to file round openings or concave surfaces. • Tapered slightly to a point.

FRS8

0.1

FRS10

0.3

FRS12

0.6

Length (in.)

Shpg. Wt. (lbs.)

0.1

Length (in.)

Shpg. Wt. (lbs.)

51⁄2

0.1

Length (in.)

Shpg. Wt. (lbs.)

0.3

SLIM TAPER FILE Primarily for filing saws.

POINTS FILE

Part No. FST6

Part No. FHP55

FOUR-IN-ONE HAND FILE

Part No. FFH8

206

www.westwardtools.ca

W207-10.qxp

2/12/10

2:53 PM

Page 207

DRILLS & CUTTING TOOLS

Drill Bit Sets . . . . . . . . . . . . . . . . 208 Drill Storage. . . . . . . . . . . . . . . . 208 Jobber Drills. . . . . . . . . . . . . . . . 209 Stubby Drills . . . . . . . . . . . . . . . 209 Prentice Drills. . . . . . . . . . . . . . . 210 Tap & Die Sets . . . . . . . . . . . 211-213 Hand Taps . . . . . . . . . . . . . . 214-219 Round Dies . . . . . . . . . . . . . 220-221 Hacksaws & Blades. . . . . . . . 223-224 Reciprocating Saw Blades . . . . . . 224 Hole Saw Kits. . . . . . . . . . . . 225-226 Hole Saws . . . . . . . . . . . . . . 227-228 Screw Extractors . . . . . . . . . . 229-230 Stud Removers . . . . . . . . . . . . . . 230

W208-10.qxp

2/12/10

2:54 PM

Page 208

DRILLS 29 PIECE HIGH SPEED JOBBER DRILL SET • • • •

Surface treated jobbers length, black finished drills. High speed steel 118° point. Ideal for tool steel, carbon steels, alloy and cast. Sizes: 1⁄16" – 1⁄2" by 64ths.

Part No. DSB29

Description 29 Piece Set

1⁄16"

Shpg. Wt. (lbs.) -

1⁄2"

by 64ths

3.4

21 PIECE HIGH SPEED JOBBER DRILL SET • • • •

Surface treated jobbers length, black finished drills. High speed steel 118° point. Ideal for tool steel, carbon steels, alloy and cast. Sizes: 1⁄16" – 3⁄8" by 64ths.

Part No. DSB21

Description 21 Piece Set

1⁄16"

Shpg. Wt. (lbs.) -

3⁄8"

by 64ths

1.6

13 PIECE HIGH SPEED JOBBER DRILL SET • • • •

Surface treated jobbers length, black finished drills. High speed steel 118° point. Ideal for tool steel, carbon steels, alloy and cast. Sizes: 1⁄16" – 1⁄4" by 64ths.

Part No.

Description

DSB13

13 Piece Set 1⁄16" - 1⁄4" by 64ths

Shpg. Wt. (lbs.) 0.8

DRILL DISPENSER • Holds at least 12 each of drills 1⁄16" – 1⁄2" by 64ths. • One piece drawer slide for longer life. • 145⁄8" wide, 73⁄8" deep and 73⁄4" high.

Part No.

Description

DB1

3 Drawer Cabinet

Shpg. Wt. (lbs.) 13.0

DRILL INDEX BOX ONLY

208

Part No.

Description

DB29

Holds 1⁄16" to 1⁄2" by 64ths

Shpg. Wt. (lbs.) 2.4

www.westwardtools.ca

W209-10.qxp

2/12/10

2:54 PM

Page 209

DRILLS JOBBER LENGTH DRILLS • General purpose high speed steel. • 118° point black finish.

Part No.

Size (in.)

DRJ164

1⁄64

Decimal Flute Equivalent (in.) Length (in.)

Length (in.)

Shpg. Wt. (lbs.)

0.0156

3⁄16

3⁄4

0.1

DRJ132

1⁄32

0.0312

1⁄2

13⁄8

0.1

DRJ364

3⁄64

0.0469

3⁄4

13⁄4

0.1

DRJ116

1⁄16

0.0625

7⁄8

17⁄8

0.1

DRJ564

5⁄64

0.0781

0.1

DRJ332

3⁄32

0.0938

11⁄4

21⁄4

0.1

DRJ764

7⁄64

0.1094

11⁄2

25⁄8

0.1

DRJ18

1⁄8

0.1250

15⁄8

23⁄4

0.1

DRJ964

9⁄64

0.1406

13⁄4

27⁄8

0.1

DRJ532

5⁄32

0.1562

31⁄8

0.1

DRJ1164

11⁄64

0.1719

21⁄8

31⁄4

0.1

DRJ316

3⁄16

0.1875

25⁄16

31⁄2

0.1

DRJ1364

13⁄64

0.2031

27⁄16

35⁄8

0.1

DRJ732

7⁄32

0.2188

21⁄2

33⁄4

0.1

DRJ1564

15⁄64

0.2344

25⁄8

37⁄8

0.1

1⁄4

0.2500

23⁄4

0.1

17⁄64

0.2656

27⁄8

41⁄8

0.1

DRJ932

9⁄32

0.2812

215⁄16

41⁄4

0.1

DRJ1964

19⁄64

0.2969

31⁄16

43⁄8

0.1

DRJ516

5⁄16

0.3125

33⁄16

41⁄2

0.1

DRJ2164

21⁄64

0.3281

35⁄16

45⁄8

0.1

DRJ1132

11⁄32

0.3438

37⁄16

43⁄4

0.1

DRJ2364

23⁄64

0.3594

31⁄2

47⁄8

0.1

DRJ14 DRJ1764

DRJ38

0.3750

35⁄8

0.1

DRJ2564

25⁄64

0.3906

33⁄4

51⁄8

0.1

DRJ1332

13⁄32

0.4062

37⁄8

51⁄4

0.2

DRJ2764

27⁄64

0.4219

315⁄16

53⁄8

0.2

DRJ716

7⁄16

0.4375

41⁄16

51⁄2

0.2

DRJ2964

29⁄64

0.4531

43⁄16

55⁄8

0.2

DRJ1532

15⁄32

0.4688

45⁄16

53⁄4

0.2

DRJ3164

31⁄64

0.4844

43⁄8

57⁄8

0.2

1⁄2

0.5000

41⁄2

0.2

Length (in.)

Shpg. Wt. (lbs.)

DRJ12

3⁄8

HIGH SPEED STUBBY DRILL BITS Black finish high speed steel.

Part No.

Size (in.)

Decimal Flute Equivalent (in.) Length (in.)

DRS18

1⁄8

0.1250

7⁄8

17⁄8

0.1

DRS964

9⁄64

0.1406

15⁄16

115⁄16

0.1

DRS316

3⁄16

0.1875

11⁄8

23⁄16

0.1

DRS14

1⁄4

0.2500

13⁄8

21⁄2

0.1

www.westwardtools.ca

209

W210-10.qxp

2/12/10

2:56 PM

Page 210

DRILLS 1⁄2"

SHANK PRENTICE DRILLS

High speed steel, black finish.

Part No.

Size (in.)

Decimal Flute Equivalent (in.) Length (in.)

Length (in.)

Shpg. Wt. (lbs.)

DRP3364

33⁄64

0.5156

31⁄8

0.2

DRP1732

17⁄32

0.5312

31⁄8

0.2

DRP3564

35⁄64

0.5469

31⁄8

0.2

DRP916

9⁄16

0.5625

31⁄8

0.2

DRP3764

37⁄64

0.5781

31⁄8

0.3

DRP1932

19⁄32

0.5938

31⁄8

0.3

DRP3964

39⁄64

0.6094

31⁄8

0.3

5⁄8

0.6250

31⁄8

0.3

DRP58 DRP4164

41⁄64

0.6406

31⁄8

0.3

DRP2132

21⁄32

0.6562

31⁄8

0.3

DRP4364

43⁄64

0.6719

31⁄8

0.3

DRP1116

11⁄16

0.6875

31⁄8

0.3

DRP4564

45⁄64

0.7031

31⁄8

0.3

DRP2332

23⁄32

0.7188

31⁄8

0.3

DRP4764

47⁄64

0.7344

31⁄8

0.4

3⁄4

0.7500

31⁄8

0.4

DRP4964

49⁄64

0.7656

0.4

DRP2532

25⁄32

0.7812

0.4

DRP1316

13⁄16

0.8125

0.4

DRP2732

27⁄32

0.4

DRP34

0.8438

7⁄8

0.8750

0.5

29⁄32

0.9062

0.5

DRP1516

15⁄16

0.9375

0.5

DRP3132

31⁄32

0.9688

0.5

1.0000

0.5

DRP1-116

11⁄16

1.0625

0.5

DRP1-18

11⁄8

1.1250

0.5

DRP1-316

13⁄16

1.1875

0.6

DRP1-14

11⁄4

1.2500

0.6

DRP1-38

13⁄8

1.3750

0.8

DRP78 DRP2932

DRP1

DRILL GAUGE • Quickly identifies drill sizes. • Made from heavy gauge steel. • Hole sizes are permanently marked.

Part No. DG1

210

Description Sizes Drills In SAE

Shpg. Wt. (lbs.) (1⁄64"

1⁄2")

by 64ths

0.1

www.westwardtools.ca

W211-10.qxp

2/12/10

2:57 PM

Page 211

TAP & DIES TAP & DIE SET One each, taper and bottom taps in the following sizes: NC 11 sizes from 4-40 to 3⁄4"-10 NF 9 sizes from 10-32 to 3⁄4"-16 1⁄4"-24, 1⁄4"-32 NS 1⁄8"-27, 1⁄4"-18 (two each) NPT Metric 9 sizes from M6 x 1.0 to M18 x 1.5 One each, of either 1" or 11⁄2" diameter dies in the following sizes: NC 13 sizes from 4-40 to 3⁄4"-10 NF 9 sizes from 10-32 to 3⁄4"-16 1⁄4"-24, 1⁄4"-32 NS 1⁄8"-27, 1⁄4"-18 NPT Metric 11 sizes from M6 x 1.0 to M18 x 1.5 One each 9" and 15" tap wrenches, 1" and 11⁄2" die stocks, and 1⁄16" to 3⁄16" capacity tap handle. • Made from alloy steel, these taps and dies are designed for maintenance application. • Can be used on a wide range of materials from steels to cast iron and aluminum.

Part No.

Description

Shpg. Wt. (lbs.)

OK3110

110 Piece Set

40.0

TiN COATED TAP & DIE SET One each, taper and bottom taps in the following sizes: NC 11 sizes from 4-40 to 3⁄4"-10 NF 9 sizes from 10-32 to 3⁄4"-16 1⁄4"-24, 1⁄4"-21 NS 1⁄8"-27, 1⁄4"-18 (two each) NPT Metric 9 sizes from M6 x 1.0 to M18 x 1.5 One each, of either 1" or 11⁄2" diameter dies in the following sizes: NC 13 sizes from 4-40 to 3⁄4"-10 NF 9 sizes from 10-32 to 3⁄4"-16 1⁄4"-24, 1⁄4"-32 NS 1⁄8"-27, 1⁄4"-18 NPT Metric 11 sizes from M6 x 1.0 to M18 x 1.5 One each 9" and 15" tap wrenches, 1" and 11⁄2" dies stocks, and 1⁄16" to 3⁄16" capacity tap handle. • Made from alloy steel, these taps and dies are designed for maintenance application. • Can be used on a wide range of materials from steels to cast iron and aluminum.

Part No.

Description

OK3110T

110 Piece Set TiN Coated

Shpg. Wt. (lbs.) 40.0

NC, NF TAP & DIE SETS One each, 11⁄2" diameter dies and plug taps in the following sizes: NC 5 sizes from 1⁄4"-20 to 1⁄2"-13. NF 5 sizes from 1⁄4"-28 to 1⁄2"-20. One each, 2" diameter dies and plug taps in the following sizes: NC 5 sizes from 9⁄16"-12 to 1"-8. NF 5 sizes from 9⁄16"-18 to 1"-14. Includes 11" and 19" tap wrenches, 2" die stock, 11⁄2" adaptor, and screwdriver all packaged in a metal case

Part No.

Description

Shpg. Wt. (lbs.)

OK404

45 Piece Set

26.0

www.westwardtools.ca

211

W212-10.qxp

2/12/10

2:58 PM

Page 212

TAPS & DIES

METRIC TAP & DIE SETS 20 metric tap and dies: 6 x 0.75 to 24 x 3.0. 1 tap wrench M8-M25, 1 T-type tap wrench M3-M6, 1 die wrench 50 mm OD, 1 adaptor for die wrench 38 mm OD, and 1 screwdriver.

Part No.

Description

Shpg. Wt. (lbs.)

OK405

45 Piece Set

8.5

METRIC & INCH TAP & DIE SETS 16 metric taps and dies: 3 x 0.5 to 12 x 1.5. 16 UNC/UNF taps and dies: 4-40 to 1⁄2"-20. 11⁄8"-28 BSP tap and die, 11⁄8"-27 NPT tap and die. 1 tap wrench M3-MIL, 2 t-type tap wrench M3-M6. 2 die wrenches; 20, 25 mm OD, 1 screwdriver, 1 metric pitch gauge and 1 inch screw pitch gauge.

Part No.

Description

Shpg. Wt. (lbs.)

OK403

76 Piece Set

12.0

40 PIECE SAE TAP & DIE SET 10 UNC taps and dies: 4-40 to 1⁄2"-13. 6 UNF taps and dies: 10-32 to 1⁄2"-20. 1 NPT tap and die: 1⁄8"-27. 1 tap wrench 1⁄16" – 1⁄2", 1 die wrench 1" OD, 1 screwdriver and 1 screwdriver pitch gauge.

212

Part No.

Description

OK402

40 Piece SAE Set

Shpg. Wt. (lbs.) 9.0

www.westwardtools.ca

W213-10.qxp

2/12/10

2:58 PM

Page 213

TAPS & DIES

40 PIECE METRIC TAP & DIE SET 16 metric taps and dies: 3 x 0.5 to 12 x 1.75. 1 NPT tap and die: 1⁄8"-27. 1 tap wrench M3-M12 capacity, 1 T-type tap wrench M3-M6, 1 die wrench 1" OD, 1 screwdriver and 1 screwdriver pitch gauge.

Part No.

Description

OK401

40 Piece Metric Set

Shpg. Wt. (lbs.) 9.0

NC, NF TAP & DIE SET One each, 1" diameter dies: 1⁄4", 5⁄16", 3⁄8", 7⁄16", 1⁄2" NC 1⁄4", 5⁄16", 3⁄8", 7⁄16", 1⁄2" NF Machine screws 4-36, 6-32, 8-32, 10-24, 12-24, 10-32 Plug taps (same sizes as above), 9" adjustable tap wrench, 1⁄16" to 3⁄16" capacity T-handle tap wrench, 1" die stock, screwdriver, PGM pitch gauge in a high impact case. • Made from alloy steel, these taps and dies are designed for maintenance application. • Can be used on a wide range of materials from steels to cast iron and aluminum.

Part No.

Description

Shpg. Wt. (lbs.)

AK40

40 Piece Set

8.0

METRIC TAP & DIE SET One each, 1" diameter dies: Metric M3 x 0.5, M3 x 0.6, M4 x 0.7, M4 x 0.75, M5 x 0.8, M5 x 0.9, M6 x 1.0, M6 x 0.75, M7 x 1.0, M7 x 0.75, M8 x 1.25, M8 x 1.0, M10 x 1.5, M10 x 1.25, M12 x 1.75, M12 x 1.5 1⁄8"-27 NPT Plug taps (same sizes as above), 9" adjustable tap wrench, 1⁄16" to 3⁄16" capacity T-handle tap wrench, 1" die stock, screwdriver, PGM pitch gauge, in a high impact case. • Made from alloy steel, these taps and dies are designed for maintenance application. • Can be used on a wide range of materials from steels to cast iron and aluminum.

Part No.

Description

Shpg. Wt. (lbs.)

AK40M

40 Piece Set

8.0

www.westwardtools.ca

213

W214-10.qxp

2/12/10

2:59 PM

Page 214

TAPS & DIES MASTER RETHREADER KIT One rethreader die in each of the following sizes: • UNC 7 sizes from 1⁄4" to 5⁄8". • UNF 7 sizes from 1⁄4" to 5⁄8". • Metric 7 sizes from 6 x 1.0 to 12 x 1.75. Rethreading taps: • UNC 6 sizes from 1⁄4" to 9⁄16". • UNF 6 sizes from 1⁄4" to 9⁄16". • Metric same sizes as above. Two thread files and high impact case. • Made from alloy steel, these taps and dies are designed for maintenance application. • Can be used on a wide range of materials from steels to cast iron and aluminum.

Part No.

Description

Shpg. Wt. (lbs.)

HXK43

43 Piece Set

8.0

ROUND DIE STOCK HANDLES Part No.

O.D. of Die

Length (in.)

Shpg. Wt. (lbs.)

71⁄2

0.4

11⁄2"

1.0

1.2

DS1 DS1-12 DS2

TAP WRENCHES • Holds square or round shanks. • For holding taps and other tools turned by hand.

Part No.

Hand Tap Range (in.)

Length (in.)

Pipe Tap Range (in.)

Shpg. Wt. (lbs.)

1⁄8

0.6

TWR4

1⁄16

- 1⁄2

TWR5

3⁄16

- 1⁄2

1⁄8

- 1⁄4

0.7

1⁄4

3⁄4

1⁄8

3⁄8

1.0

TWR7

3⁄8

-1

1⁄8

3⁄4

1.5

TWR8

TWR6

3⁄4

- 11⁄2

3⁄8

- 11⁄4

3.5

T-HANDLE TAP WRENCHES • Self centering steel jaws and knurled chuck sleeve. • For holding taps, drills, reamers and other small tools turned by hand.

214

Part No.

Description

T10

1⁄16"

T40

1⁄4"

Shpg. Wt. (lbs.)

to 3⁄16" Tap Capacity

1⁄2"

Tap Capacity

0.2 0.3

www.westwardtools.ca

W215-10.qxp

2/12/10

3:00 PM

Page 215

TAPS & DIES PITCH GAUGES Part No.

Range

No. of Sizes

Shpg. Wt. (lbs.)

PGS

12 - 40 SAE

0.1

PGM

0.5 - 1.75 Metric

0.1

CENTER GAUGE • Graduated in 14ths, 20ths, 24ths, and 32nds of an inch for checking threads per inch. • 60° angles for US standard threads.

Part No.

Description

Shpg. Wt. (lbs.)

6JR80

Center Gauge

0.1

ALLOY PIPE THREAD DIES • Made from alloy steel, these taps and dies are designed for maintenance application. • Can be used on a wide range of materials from steels to cast iron and aluminum.

Dia. (in.)

RDP1-18

1⁄8"

NPT

0.1

RDP1-12-18

11⁄2

1⁄8"

NPT

0.2

RDP1-12-14

11⁄2

1⁄4"

NPT

0.2

RDP1-12-12

11⁄2

1⁄2"

NPT

0.2

3⁄8"

NPT

0.3

RDP2-38

Size

Threads Per Inch Shpg. Wt. (lbs.)

Part No.

ALLOY PIPE TAPS • Made from alloy steel, these taps and dies are designed for maintenance application. • Can be used on a wide range of materials from steels to cast iron and aluminum.

Part No.

Size

Overall Thread Length (in.) Length (in.) Shpg. Wt. (lbs.)

PT18

1⁄8"

21⁄8

3⁄4

0.1

PT14

1⁄4"

27⁄16

11⁄16

0.1

PT38

3⁄8"

29⁄16

11⁄16

0.1

PT12

1⁄2"

31⁄8

13⁄8

0.3

PT34

3⁄4"

31⁄4

13⁄8

0.5

PT1

33⁄4

13⁄4

0.6

PT1-14

11⁄4"

13⁄4

0.9

PT1-12

11⁄2"

41⁄4

13⁄4

0.9

41⁄2

13⁄4

1.2

PT2

www.westwardtools.ca

215

W216-10.qxp

2/12/10

3:01 PM

Page 216

TAPS & DIES SAE HAND TAPS – TAPER • Made from alloy steel, these taps are designed for maintenance application. • Can be used on a wide range of materials from steels to cast iron and aluminum.

TAP14NCT

TAP34NCT

TAP1-14NFT

SAE HAND TAPS – PLUG • Made from alloy steel, these taps are designed for maintenance application. • Can be used on a wide range of materials from steels to cast iron and aluminum.

TAP1NTF12

TAP1-18NCT

TAP1-18NFP

216

Part No. TAP14NCT TAP14NFT TAP516NCT TAP516NFT TAP38NCT TAP716NCT TAP716NFT TAP12NCT TAP12NFT TAP916NCT TAP916NFT TAP58NCT TAP58NFT TAP34NCT TAP34NFT TAP78NCT TAP78NFT TAP1NCT TAP1NFT12 TAP1NFT14 TAP1-18NCT TAP1-18NFT TAP1-14NCT TAP1-14NFT TAP14NCP TAP14NFP TAP516NCP TAP516NFP TAP38NCP TAP38NFP TAP716NCP TAP716NFP TAP12NCP TAP12NFP TAP916NCP TAP916NFP TAP58NCP TAP58NFP TAP34NCP TAP34NFP TAP78NCP TAP78NFP TAP1NCP TAP1NFP12 TAP1NFP14 TAP1-18NCP TAP1-18NFP TAP1-14NCP TAP1-14NFP

Size (in.) Threads Per Inch Length (in.) Shpg. Wt. (lbs.) 1⁄4

21⁄2

0.1

1⁄4

21⁄2

0.1

5⁄16

223⁄32

0.1

5⁄16

223⁄32

0.2

3⁄8

215⁄16

0.2

7⁄16

35⁄32

0.2

7⁄16

35⁄32

0.2

1⁄2

33⁄8

0.2

1⁄2

33⁄8

0.3

9⁄16

319⁄32

0.4

9⁄16

319⁄32

0.4

5⁄8

313⁄16

0.5

5⁄8

313⁄16

0.5

3⁄4

41⁄4

0.6

3⁄4

41⁄4

0.6

7⁄8

411⁄16

0.7

7⁄8

411⁄16

0.7

51⁄8

0.8

51⁄8

0.8

51⁄8

0.8

11⁄8

57⁄16

1.0

11⁄8

57⁄16

1.0

11⁄4

53⁄4

1.1

11⁄4

53⁄4

1.1

1⁄4

21⁄2

0.1

1⁄4

21⁄2

0.1

5⁄16

223⁄32

0.1

5⁄16

223⁄32

0.2

3⁄8

215⁄16

0.2

3⁄8

215⁄16

0.2

7⁄16

35⁄32

0.2

7⁄16

35⁄32

0.2

1⁄2

33⁄8

0.2

1⁄2

33⁄8

0.3

9⁄16

319⁄32

0.4

9⁄16

319⁄32

0.4

5⁄8

313⁄16

0.5

5⁄8

313⁄16

0.5

3⁄4

41⁄4

0.6

3⁄4

41⁄4

0.6

7⁄8

411⁄16

0.7

7⁄8

411⁄16

0.7

51⁄8

0.8

51⁄8

0.8 0.8

51⁄8

11⁄8

57⁄16

1.0

11⁄8

57⁄16

1.0

11⁄4

53⁄4

1.1

11⁄4

53⁄4

1.1

www.westwardtools.ca

W217-10.qxp

2/12/10

3:02 PM

Page 217

TAPS & DIES Size (in.)

Threads Per Inch

Length (in.)

Shpg. Wt. (lbs.)

TAP14NCB

1⁄4

21⁄2

0.1

TAP14NFB

1⁄4

21⁄2

0.1

TAP516NCB

5⁄16

223⁄32

0.1

TAP516NFB

5⁄16

223⁄32

0.2

TAP38NCB

3⁄8

215⁄16

0.2

TAP38NFB

3⁄8

215⁄16

0.2

TAP716NCB

7⁄16

35⁄32

0.2

TAP716NFB

7⁄16

35⁄32

0.2

TAP12NCB

1⁄2

33⁄8

0.2

TAP12NFB

1⁄2

33⁄8

0.3

TAP916NCB

9⁄16

319⁄32

0.4

TAP916NFB

9⁄16

319⁄32

0.4

TAP58NCB

5⁄8

313⁄16

0.5

TAP58NFB

5⁄8

313⁄16

0.5

TAP34NCB

3⁄4

41⁄4

0.6

TAP34NFB

3⁄4

41⁄4

0.6

TAP78NCB

7⁄8

411⁄16

0.7

TAP78NFB

7⁄8

411⁄16

0.7

TAP1NCB

51⁄8

0.8

SAE HAND TAPS – BOTTOMING

0.8

• Made from alloy steel, these taps and dies are designed for maintenance application. • Can be used on a wide range of materials from steels to cast iron and aluminum.

Part No.

TAP1NFB12

51⁄8

TAP1NFB14

51⁄8

0.8

TAP1-18NCB

11⁄8

57⁄16

1.0

TAP1-18NFB

11⁄8

57⁄16

1.0

TAP1-14NCB

11⁄4

53⁄4

1.1

TAP1-14NFB

11⁄4

53⁄4

1.1

Part No.

Size

Threads Per Inch

Length (in.)

Shpg. Wt. (lbs.)

TAP440T

17⁄8

0.1

TAP632T

0.1

TAP640T

0.1

TAP832T

21⁄8

0.1

TAP1032T

23⁄8

0.1

23⁄8

0.1

23⁄8

0.1

Part No.

Size

Threads Per Inch

Length (in.)

Shpg. Wt. (lbs.)

TAP440P

17⁄8

0.1

TAP632P

0.1

TAP640P

0.1

TAP832P

21⁄8

0.1

TAP1032P

23⁄8

0.1

TAP1024P

23⁄8

0.1

TAP1224P

23⁄8

0.1

TAP1024T TAP1224T

www.westwardtools.ca

MACHINE SCREW HAND TAPS – TAPER • Made from alloy steel, these taps and dies are designed for maintenance application. • Can be used on a wide range of materials from steels to cast iron and aluminum.

MACHINE SCREW HAND TAPS – PLUG • Made from alloy steel, these taps and dies are designed for maintenance application. • Can be used on a wide range of materials from steels to cast iron and aluminum.

217

W218-10.qxp

2/12/10

3:03 PM

Page 218

TAPS & DIES

MACHINE SCREW HAND TAPS – BOTTOMING • Made from alloy steel, these taps and dies are designed for maintenance application. • Can be used on a wide range of materials from steels to cast iron and aluminum.

Part No.

Size

Threads Per Inch

Length (in.)

Shpg. Wt. (lbs.)

TAP440B

17⁄8

0.1

TAP632B

0.1

TAP640B

0.1

21⁄8

0.1 0.1

TAP832B

TAP1032B

23⁄8

TAP1024B

23⁄8

0.1

23⁄8

0.1

Size (mm)

Pitch

Length (in.)

Shpg. Wt. (lbs.)

0.50

21⁄8

0.1 0.1

TAP1224B

Part No. TAP4MMT5 TAP4MMT7

0.70

21⁄8

TAP4MMT75

0.75

21⁄8

0.1

0.50

23⁄8

0.1 0.1

TAP5MMT5

TAP5MMT8

0.80

23⁄8

TAP5MMT9

0.90

23⁄8

0.1

1.00

21⁄2

0.1 0.1

TAP6MMT1

TAP6MMT5

0.50

21⁄2

TAP6MMT75

0.75

21⁄2

0.1

1.00

223⁄32

0.1 0.1

TAP8MMT1

TAP8MMT125

1.25

223⁄32

TAP8MMT5

0.50

223⁄32

0.1 0.2

TAP10MMT1

1.00

215⁄16

TAP10MMT125

1.25

215⁄16

0.2

TAP10MMT15

1.50

215⁄16

0.2 0.2

TAP12MMT1

1.00

33⁄8

TAP12MMT125

1.25

33⁄8

0.2

TAP12MMT15

1.50

33⁄8

0.2 0.2

METRIC HAND TAPS – TAPER

TAP12MMT175

1.75

33⁄8

• Made from alloy steel, these taps and dies are designed for maintenance application. • Can be used on a wide range of materials from steels to cast iron and aluminum.

TAP14MMT125

1.25

319⁄32

0.3

TAP14MMT15

1.50

319⁄32

0.3 0.3

TAP14MMT2

2.00

319⁄32

TAP16MMT15

1.50

313⁄16

0.3

2.00

313⁄16

0.3 0.5

TAP16MMT2 TAP18MMT15

1.50

41⁄32

TAP18MMT2

2.00

41⁄32

0.5

1.50

415⁄32

0.6 0.6

TAP20MMT15

TAP20MMT25

2.50

415⁄32

TAP22MMT15

1.50

411⁄16

0.7

2.50

411⁄16

0.7

TAP22MMT25

218

www.westwardtools.ca

W219-10.qxp

2/12/10

3:04 PM

Page 219

TAPS & DIES Part No.

Size (mm)

Pitch

Length (in.)

Shpg. Wt. (lbs.) 0.1

TAP4MMP5

0.50

21⁄8

TAP4MMP7

0.70

21⁄8

0.1

0.75

21⁄8

0.1 0.1

TAP4MMP75

TAP5MMP5

0.50

23⁄8

TAP5MMP8

0.80

23⁄8

0.1

0.90

23⁄8

0.1 0.1

TAP5MMP9

TAP6MMP1

1.00

21⁄2

TAP6MMP5

0.50

21⁄2

0.1

0.75

21⁄2

0.1

TAP6MMP75

TAP8MMP1

1.00

223⁄32

0.1

TAP8MMP125

METRIC HAND TAPS – PLUG

1.25

223⁄32

0.1 0.1

• Made from alloy steel, these taps and dies are designed for maintenance application. • Can be used on a wide range of materials from steels to cast iron and aluminum.

TAP8MMP5

0.50

223⁄32

TAP10MMP1

1.00

215⁄16

0.2

TAP10MMP125

1.25

215⁄16

0.2 0.2

TAP10MMP15

1.50

215⁄16

TAP12MMP1

1.00

33⁄8

0.2

TAP12MMP125

1.25

33⁄8

0.2 0.2

TAP12MMP15

1.50

33⁄8

TAP12MMP175

1.75

33⁄8

0.2

TAP14MMP125

1.25

319⁄32

0.3 0.3

TAP14MMP15

1.50

319⁄32

TAP14MMP2

2.00

319⁄32

0.3

1.50

313⁄16

0.3 0.3

TAP16MMP15

TAP16MMP2

2.00

313⁄16

TAP18MMP15

1.50

41⁄32

0.5

2.00

41⁄32

0.5 0.6

TAP18MMP2

TAP20MMP15

1.50

415⁄32

TAP20MMP25

2.50

415⁄32

0.6

1.50

411⁄16

0.7

2.50

411⁄16

0.7

Size (mm)

Pitch

Length (in.)

Shpg. Wt. (lbs.)

0.50

21⁄8

0.1 0.1

TAP22MMP15 TAP22MMP25

Part No. TAP4MMB5

TAP4MMB7

0.70

21⁄8

TAP4MMB75

0.75

21⁄8

0.1

TAP5MMB5

METRIC HAND TAPS – BOTTOMING

0.50

23⁄8

0.1 0.1

• Made from alloy steel, these taps and dies are designed for maintenance application. • Can be used on a wide range of materials from steels to cast iron and aluminum.

TAP5MMB8

0.80

23⁄8

TAP5MMB9

0.90

23⁄8

0.1

TAP6MMB1

1.00

21⁄2

0.1 0.1

TAP6MMB5

0.50

21⁄2

TAP6MMB75

0.75

21⁄2

0.1

TAP8MMB1

1.00

223⁄32

0.1

www.westwardtools.ca

Continued on page 220.

219

W220-10.qxp

2/12/10

3:04 PM

Page 220

TAPS & DIES Part No.

Size (mm)

Pitch

1.25

223⁄32

0.1 0.1

TAP8MMB125

Length (in.) Shpg. Wt. (lbs.)

TAP8MMB5

0.50

223⁄32

TAP10MMB1

1.00

215⁄16

0.2

TAP10MMB125

1.25

215⁄16

0.2 0.2

TAP10MMB15

1.50

215⁄16

TAP12MMB1

1.00

33⁄8

0.2

1.25

33⁄8

0.2 0.2

TAP12MMB125

METRIC HAND TAPS – BOTTOMING

TAP12MMB15

1.50

33⁄8

Continued from page 219. • Made from alloy steel, these taps and dies are designed for maintenance application. • Can be used on a wide range of materials from steels to cast iron and aluminum.

TAP12MMB175

1.75

33⁄8

0.2

1.25

319⁄32

0.3 0.3

TAP14MMB125

TAP14MMB15

1.50

319⁄32

TAP14MMB2

2.00

319⁄32

0.3

1.50

313⁄16

0.3 0.3

TAP16MMB15

1" SOLID DIES • Made from alloy steel, these taps and dies are designed for maintenance application. • Can be used on a wide range of materials from steels to cast iron and aluminum.

220

TAP16MMB2

2.00

313⁄16

TAP18MMB15

1.50

41⁄32

0.5 0.5

TAP18MMB25

2.50

41⁄32

TAP20MMB15

1.50

415⁄32

0.6

TAP20MMB25

2.50

415⁄32

0.6 0.7 0.7

TAP22MMB15

1.50

411⁄16

TAP22MMB25

2.50

411⁄16

Part No. RD1-632 RD1-640 RD1-832 RD1-836 RD1-1024 RD1-1032 RD1-1224 RD1-1228 RD1-14NC RD1-14NF RD1-516NC RD1-516NF RD1-38NC RD1-38NF RD1-716NC RD1-716NF RD1-12NC RD1-12NF

Size

Outside Threads Per Inch Diameter (in.)

Shpg. Wt. (lbs.)

0.1

1⁄4"

0.1

1⁄4"

0.1

5⁄16"

0.1

5⁄16"

0.1

3⁄8"

0.1

3⁄8"

0.1

7⁄16"

0.1

7⁄16"

0.1

1⁄2"

0.1

1⁄2"

0.1

www.westwardtools.ca

W221-10.qxp

2/12/10

3:05 PM

Page 221

TAPS & DIES 11⁄2" ADJUSTABLE DIES • Made from alloy steel, these taps and dies are designed for maintenance application. • Can be used on a wide range of materials from steels to cast iron and aluminum.

Part No.

Size (in.)

Threads Per Outside Inch Diameter (in.)

Shpg. Wt. (lbs.)

RD1-12-14NF

1⁄4

11⁄2

0.2

RD1-12-14NC

1⁄4

11⁄2

0.2

RD1-12-516NF

5⁄16

11⁄2

0.2

RD1-12-516NC

5⁄16

11⁄2

0.2

RD1-12-38NF

3⁄8

11⁄2

0.2

RD1-12-38NC

3⁄8

11⁄2

0.2

RD1-12-716NF

7⁄16

11⁄2

0.2

RD1-12-716NC

7⁄16

11⁄2

0.2

RD1-12-12NF

1⁄2

11⁄2

0.2

RD1-12-12NC

1⁄2

11⁄2

0.2

RD1-12-916NF

9⁄16

11⁄2

0.2

RD1-12-916NC

9⁄16

11⁄2

0.2

RD1-12-58NF

5⁄8

11⁄2

0.2

RD1-12-58NC

5⁄8

11⁄2

0.2

RD1-12-34NF

3⁄4

11⁄2

0.2

RD1-12-34NC

3⁄4

11⁄2

0.2

2" ADJUSTABLE DIES • Made from alloy steel, these taps and dies are designed for maintenance application. • Can be used on a wide range of materials from steels to cast iron and aluminum.

Part No. RD2-14NF

Size (in.)

Threads Per Outside Inch Diameter (in.)

Shpg. Wt. (lbs.)

1⁄4

0.3

RD2-14NC

1⁄4

0.3

RD2-516NF

5⁄16

0.3

RD2-516NC

5⁄16

0.3

RD2-38NF

3⁄8

0.3

RD2-38NC

3⁄8

0.3

RD2-716NF

7⁄16

0.3

RD2-716NC

7⁄16

0.3

RD2-12NF

1⁄2

0.3

RD2-12NC

1⁄2

0.3

RD2-916NF

9⁄16

0.3

RD2-916NC

9⁄16

0.3

RD2-58NF

5⁄8

0.3

RD2-58NC

5⁄8

0.3

RD2-34NF

3⁄4

0.3

RD2-34NC

3⁄4

0.3

RD2-78NF

7⁄8

0.3

RD2-78NC

7⁄8

0.3

www.westwardtools.ca

221

W222-10.qxp

2/12/10

3:06 PM

Page 222

TAPS & DIES

HEXAGON RETHREADING DIES Hex dies are for rethreading damaged or rusty threads. No special holder is required for this type of die, any wrench large enough will work. Ideal for maintenance in the shop or field.

Part No. Size (in.) Threads Per Inch Thickness (in.) Shpg. Wt. (lbs.) 1⁄4 1⁄4 HXD14NC 20 0.1 1 1 HXD14NF ⁄4 28 ⁄4 0.1 5⁄16 5⁄16 HXD516NC 18 0.1 5⁄16 5⁄16 HXD516NF 24 0.1 3 3 HXD38NC ⁄8 16 ⁄8 0.1 3⁄8 3⁄8 HXD38NF 24 0.1 7⁄16 7 HXD716NC 14 ⁄16 0.1 7⁄16 7⁄16 HXD716NF 20 0.1 1⁄2 1⁄2 HXD12NC 13 0.1 1 1 HXD12NF ⁄2 20 ⁄2 0.1 9⁄16 1⁄2 HXD916NC 12 0.2 9⁄16 1⁄2 HXD916NF 18 0.2 5 5 HXD58NC ⁄8 11 ⁄8 0.2 5⁄8 5⁄8 HXD58NF 18 0.2 3⁄4 3⁄4 HXD34NC 10 0.2 3 3 HXD34NF ⁄4 16 ⁄4 0.2 7⁄8 7⁄8 HXD78NC 9 0.3 7⁄8 7 HXD78NF 14 ⁄8 0.3 HXD1NC 1 8 1 0.4 HXD1NF12 1 12 1 0.4 HXD1NF14 1 14NS 1 0.4 HXD1-18NC 11⁄8 7 1 0.5 HXD1-18NF 11⁄8 12 1 0.5 1 HXD1-14NC 1 ⁄4 7 1 0.6 HXD1-14NF 11⁄4 12 1 0.6 HXD1-38NC 13⁄8 6 1 0.7 HXD1-38NF 13⁄8 12 1 0.7

STEP DRILLS • Westward step drills are ideal for drilling and enlarging holes in steel, brass aluminum, resin sheet and timber. • Step design reduces down-time when compared to changing traditional bits. • Specially treated blade results in less resistance, and a smooth cutting edge after drilling. No extra job refinishing is required. • High speed cobalt steel.

Part No.

222

Hole Size (in.)

Increments (in.)

Shank Diameter (in.)

Shpg. Wt. (lbs.)

SDM1

1⁄8

- 1⁄2

1⁄32

1⁄4

0.1

SDM3

1⁄4

- 3⁄4

1⁄16

3⁄8

0.1

SDM4

3⁄16

- 7⁄8

1⁄16

3⁄8

0.2

www.westwardtools.ca

W223-10.qxp

2/12/10

3:06 PM

Page 223

HACKSAWS HEAVY-DUTY HACKSAW Adjustable heavy-duty frame is fitted with a 250 mm (10") high speed steel blade. Can be adjusted to accept any 300 mm (12") hand blade.

Part No.

Description

20W

Hacksaw With Blade

Shpg. Wt. (lbs.) 1.6

HIGH TENSION HACKSAW High tension, heavy-duty frame, fitted with a 12" blade. Cuts at 45째 and 90째 angles, and extra blades can be stored inside the frame.

Part No.

Description

HS1

Hacksaw With Blade

Shpg. Wt. (lbs.) 1.7

HI-TENSION CUSHION GRIP QUICK CHANGE HACKSAW High grade die-cast aluminum handle with TPR soft grip front and back handles. Designed for quick blade changes.

Part No.

Description

HS12P

Quick Change Hacksaw

Shpg. Wt. (lbs.) 2.5

HI-TENSION CUSHION GRIP HACKSAW High grade die-cast aluminum handle with TPR soft grip handle.

Part No.

Description

HS12E

Hi-Tension 12" Hacksaw

Shpg. Wt. (lbs.) 2.0

CUSHION GRIP MINI GRIP HANDLE Heavy-duty aluminum construction with soft grip handle.

Part No.

Description

HS12M

Mini Grip Hacksaw

www.westwardtools.ca

Shpg. Wt. (lbs.) 0.8

223

W224-10.qxp

2/12/10

3:07 PM

Page 224

BLADES

MINI CUSHION GRIP HACKSAW High grade, die-cast frame with the soft grip handle.

Part No.

Description

Shpg. Wt. (lbs.)

HS6E

Mini Hacksaw

1.2

HACKSAW BLADES High speed bi-metal blades can be twisted 360° without breaking. The hardened high speed metal cutting edge and tooth configuration cuts quickly and prevents strippage. The tough back flexes to absorb shock and provide longer life.

Part No.

Size (in.)

Teeth Per Inch

Pkg. Qty.

Shpg. Wt. (lbs.)

HC1218

12 x 1⁄2 x 0.025

1.0

HC1224

12 x

x 0.025

1.0

HC1232

12 x 1⁄2 x 0.025

1.0

1⁄2

BI-METAL RECIPROCATING SAW BLADES Part No.

Shape

Size (in.) L x WxT

Teeth Per Inch

Pkg. Qty.

Shpg. Wt. (lbs.)

Metal Cutting HR414

Straight

4 x 3⁄4 x 0.035

0.5

HR418

Straight

4 x 3⁄4 x 0.035

0.5

HR614

Straight

6 x 3⁄4 x 0.050

0.5

HR624

Straight

0.5

HR12610T

Tapered

12 x 3⁄4 x 0.050

6/10

0.5

HR121014T Tapered

12 x 3⁄4 x 0.050

10/14

0.5

x 0.035

0.5

6 x 3⁄4 x 0.050

0.5

HR424

Straight

3⁄4

x 0.050

Wood Cutting HR66 HR610

Straight

x 0.050

0.5

HR63T

Tapered

6 x 3⁄4 x 0.050

0.5

HR66T

224

Straight

Tapered

3⁄4

x 0.050

0.5

3⁄4

x 0.050

6/10

0.5

HR6610T

Tapered

HR96T

Tapered

9 x 3⁄4 x 0.050

HR910T

Tapered

x 0.050

0.5

HR123T

Tapered

12 x 3⁄4 x 0.050

0.5

HR126T

Tapered

12 x 3⁄4 x 0.050

0.5

3⁄4

www.westwardtools.ca

W225-10.qxp

2/12/10

3:08 PM

Page 225

HOLE SAWS

GENERAL PURPOSE HOLE SAW KIT Westward holes saws are crafted from high quality bi-metal, ensuring lasting durability. Variable depth gullets provide more efficient chip clearance for greater cutting speed. 4/6 variable pitch teeth reduce noise and increase performance. Westward mandrels are designed for easy pilot drill replacement. A threaded mount for the saw blade and positive-drive pins make these mandrels extremely durable. This set contains: 7⁄8", 1", 11⁄4", 13⁄8" and 11⁄2" sizes, as well as 1⁄4" triangular arbor and adapter.

Part No.

Description

HLK8

General Purpose Hole Saw Kit

Shpg. Wt. (lbs.) 2.0

ELECTRICIAN'S HOLE SAW KIT Westward holes saws are crafted from high quality bi-metal, ensuring lasting durability. Variable depth gullets provide more efficient chip clearance for greater cutting speed. 4/6 variable pitch teeth reduce noise and increase performance. Westward mandrels are designed for easy pilot drill replacement. A threaded mount for the saw blade and positive-drive pins make these mandrels extremely durable. This set contains: 7⁄8", 11⁄8", 13⁄8", 13⁄4", 2" and 21⁄2" sizes, as well as 1⁄4" triangular shank arbor, 7⁄16 hex shank arbor and hex keys.

Part No.

Description

HLK10

Electrician's Hole Saw Kit

Shpg. Wt. (lbs.) 3.0

MASTER HOLE SAW KITS Westward holes saws are crafted from high quality bi-metal, ensuring lasting durability. Variable depth gullets provide more efficient chip clearance for greater cutting speed. 4/6 variable pitch teeth reduce noise and increase performance. Westward mandrels are designed for easy pilot drill replacement. A threaded mount for the saw blade and positive-drive pins make these mandrels extremely durable. This set contains: 7⁄8", 11⁄8", 13⁄8", 11⁄2", 13⁄4", 2", 21⁄2", 3", 41⁄8" and 41⁄2" sizes, as well as 1⁄4" triangular shank arbor, 7⁄16" hex shank arbor, SDS Plus arbor and 12" extension.

Part No.

Description

HLK17

Master Hole Saw Kit

www.westwardtools.ca

Shpg. Wt. (lbs.) 6.0

225

W226-10.qxp

2/12/10

3:09 PM

Page 226

HOLE SAWS INDUSTRIAL HOLE SAW KIT 11 popular sizes. One each hole saws: 3⁄4", 7⁄8", 1", 11⁄4", 13⁄8", 11⁄2", 13⁄4", 2", 21⁄4", 21⁄2", 3". Includes 2 arbors, extension bar and ejection spring. All items are packaged in a foam filled protective case. Westward hole saws are crafted from high quality bi-metal, ensuring lasting durability. Variable depth gullets provide more efficient chip clearance for greater cutting speed. 4/6 variable pitch teeth reduce noise and increase performance. Westward mandrels are designed for easy pilot drill replacement. A threaded mount for the saw blade and positive-drive pins make these mandrels extremely durable.

Shpg. Wt. (lbs.)

Part No.

Description

HLK14

Industrial Hole Saw Kit

5.5

LOCKSET HOLE SAW KIT 6 popular sizes. One each hole saws: 7⁄8", 1", 11⁄4", 11⁄2", 13⁄4", 21⁄8". Includes 2 arbors. All items are packaged in a foam filled plastic protective case. Westward holes saws are crafted from high quality bi-metal, ensuring lasting durability. Variable depth gullets provide more efficient chip clearance for greater cutting speed. 4/6 variable pitch teeth reduce noise and increase performance. Westward mandrels are designed for easy pilot drill replacement. A threaded mount for the saw blade and positive-drive pins make these mandrels extremely durable.

Part No.

Description

HLK8L

Lockset Hole Saw Kit

Shpg. Wt. (lbs.) 2.0

PLUMBER'S HOLE SAW KIT 6 popular sizes. One each hole saws: 3⁄4", 7⁄8", 11⁄8", 11⁄2", 13⁄4", 21⁄8". Includes 2 arbors and a hex key. All items are packaged in a foam filled protective case. Westward holes saws are crafted from high quality bi-metal, ensuring lasting durability. Variable depth gullets provide more efficient chip clearance for greater cutting speed. 4/6 variable pitch teeth reduce noise and increase performance. Westward mandrels are designed for easy pilot drill replacement. A threaded mount for the saw blade and positive-drive pins make these mandrels extremely durable.

Shpg. Wt. (lbs.)

Part No.

Description

HLK8P

Plumber's Hole Saw Kit

2.0

ELECTRICIAN'S & PLUMBER'S HOLE SAW KIT 9 popular sizes. One each hole saws: 3⁄4", 7⁄8", 11⁄8", 13⁄8", 11⁄2", 13⁄4", 2", 21⁄4", 21⁄2". Includes 2 arbors, and an extension bar. All items are packaged in a foam filled protective case. Westward holes saws are crafted from high quality bi-metal, ensuring lasting durability. Variable depth gullets provide more efficient chip clearance for greater cutting speed. 4/6 variable pitch teeth reduce noise and increase performance. Westward mandrels are designed for easy pilot drill replacement. A threaded mount for the saw blade and positive-drive pins make these mandrels extremely durable.

226

Shpg. Wt. (lbs.)

Part No.

Description

HLK12

Electrician's & Plumber's Hole Saw Kit

5.0

www.westwardtools.ca

W227-10.qxp

2/12/10

3:09 PM

Page 227

HOLE SAWS BI-METAL HOLE SAWS Westward holes saws are crafted from high quality bi-metal, ensuring lasting durability. Variable depth gullets provide more efficient chip clearance for greater cutting speed. 4/6 variable pitch teeth reduce noise and increase performance. Westward mandrels are designed for easy pilot drill replacement. A threaded mount for the saw blade and positive-drive pins make these mandrels extremely durable.

Size (in.)

Size (mm)

Depth of Cut (in.)

Depth of Cut (mm)

Shpg. Wt. (lbs.)

HL58

5⁄8

1.85

0.2

HL34

3⁄4

1.85

0.2

13⁄16

1.85

0.2

Part No.

HL1316 HL78

7⁄8

1.85

0.2

HL1

1.85

0.3

HL116

11⁄16

1.85

0.3

HL118

11⁄8

1.85

0.3

HL1-316

13⁄16

1.85

0.3

HL1-14

11⁄4

1.85

0.4

HL1-38

13⁄8

1.85

0.4

HL1-12

11⁄2

1.85

0.4

HL1-58

15⁄8

1.85

0.4

HL1-34

13⁄4

1.85

0.4

HL1-78

17⁄8

1.85

0.4

1.85

0.4

HL2-18

21⁄8

1.85

0.4

HL2-14

21⁄4

1.85

0.5

HL2-38

23⁄8

1.85

0.5

HL2-12

21⁄2

1.85

0.5

HL2-58

25⁄8

1.85

0.6

HL2-34

23⁄4

1.85

0.6

HL2-78

27⁄8

1.85

0.6

HL2

HL3

1.85

HL3-18

31⁄8

1.85

0.7

HL3-14

31⁄4

1.85

0.7

HL3-12

31⁄2

1.85

0.8

HL3-58

35⁄8

1.85

0.8

HL3-34

33⁄4

1.85

0.8

102

1.85

0.9

HL4-18

41⁄8

105

1.85

0.9

HL4-14

41⁄4

108

1.85

0.9

HL4-12

41⁄2

114

1.85

1.2

HL4-34

43⁄4

121

1.85

1.4

127

1.85

1.5

51⁄2

140

1.85

1.7

152

1.85

1.9

HL4

HL5 HL5-12 HL6

www.westwardtools.ca

227

W228-10.qxp

2/12/10

3:10 PM

Page 228

HOLE SAWS & BURRS HOLE SAW ARBORS & ACCESSORIES Part No.

Description

Shpg. Wt. (lbs.)

HLA9001

Triangular Shank 1⁄4" Arbor

0.3

HLA9002

Hex Shank

7⁄16"

Arbor

0.2

HLA9005

Hex Shank 5⁄16" Arbor

0.2

HLA9007

Hex Shank 7⁄16" Arbor

0.4

HLA9009

SDS Plus Shank Arbor

0.4

HLA9083

1⁄4"

x 81 mm HSS Pilot Drill

0.1

HLA9084

1⁄4"

x 102 mm HSS Pilot Drill

0.1

HLA9092

Spring

0.1

HLA9080

Adapter

0.2

HLA9091

12" Extension Bar

0.5

9 PIECE 1⁄8" SHANK BURR KIT • 1⁄8" shank. • Set contains: SA51, SB51, SC51, SD51, SE51, SF51, SG51, SM51, SN51. • Wooden storage case.

Part No.

Description

CBB918DC

9 Piece Set - Double Cut

Shpg. Wt. (lbs.) 0.5

8 PIECE 1⁄4" SHANK BURR KIT • 1⁄4" shank. • Set contains: SA1, SA3, SC1, SC3, SE1, SF1, SF3, SL3. • Wooden storage case.

Part No.

Description

CBB814DC

8 Piece Set - Double Cut

Shpg. Wt. (lbs.) 0.3

7 PIECE SCREW EXTRACTOR SET • Fluted taper for wedging into work piece. • Drive wedge end into broken fitting or pipe. • Can be used with wrench or tap holder to turn out the broken fitting. • Covers sizes: 3⁄16" – 1".

228

Part No.

Description

SEK1830

7 Piece Set

Shpg. Wt. (lbs.) 0.7

www.westwardtools.ca

W229-10.qxp

2/12/10

3:10 PM

Page 229

EXTRACTORS SCREW EXTRACTORS • Fluted taper for wedging into work piece. • Drive wedge into broken fitting or pipe. • Can be used with wrench or tap holder to turn out the broken fitting.

Part No.

Range (in.)

Drill Size (in.) Shpg. Wt. (lbs.)

SE1801

3⁄16

- 1⁄4

1⁄8

0.1

SE1802

1⁄4

5⁄16

3⁄16

0.1

SE1803

5⁄16

7⁄16

15⁄64

0.1

SE1804

7⁄16

- 9⁄16

5⁄16

0.1

SE1805

9⁄16

3⁄4

3⁄8

0.2

15⁄16

15⁄32

0.2

9⁄16

0.3

11⁄2

21⁄32

0.5

SE1805A

11⁄15

SE1806

3⁄4

SE1807

11⁄8

SE1808

13⁄8 - 13⁄4

13⁄16

0.8

SE1809

13⁄4 - 21⁄8

11⁄16

1.3

-1 -

11 PIECE MULTI-SPLINE EXTRACTOR SET • • • •

Multiple splines are suited to higher torque applications. Ideal for use in confined space application. Can be used with socket, wrench or tap holder. Size range #12 to 3⁄4".

Part No.

Description

SESK11

11 Piece Extractor Set

Shpg. Wt. (lbs.) 1.1

MULTI-SPLINE SCREW EXTRACTORS • Multiple splines are suited to higher torque applications. • Ideal for use in confined space application. • Can be used with socket, wrench or tap holder.

Part No.

Size

Shpg. Wt. (lbs.)

SES1H

#12

0.1

SES2H

1⁄4"

0.1

SES3H

5⁄16"

0.1

SES4H

3⁄8"

0.1

SES5H

7⁄16"

0.1

SES6H

1⁄2"

0.2

SES7H

9⁄16"

0.2

SES8H

5⁄8"

0.2

SES9H

11⁄16"

0.2

3⁄4"

0.2

SES10H

5 PIECE SPIRAL FLUTE EXTRACTOR SET • For extracting harder metals. • The spiral flutes embed themselves deeper as more turning pressure is applied creating more grip. • Can be used with wrench or tap-holder. • Covers size range: 3⁄16" to 3⁄4".

Part No.

Description

SESK5

5 Piece Extractor Set

www.westwardtools.ca

Shpg. Wt. (lbs.) 0.3

229

W230-10.qxp

2/12/10

3:11 PM

Page 230

EXTRACTORS

SPIRAL FLUTED SCREW EXTRACTORS • For extracting harder metals. • The spiral flutes embed themselves deeper as more turning pressure is applied creating more grip. • Can be used with wrench or tap-holder.

Part No.

Drill Size (in.)

Range (in.)

SES1

7⁄64

3⁄16

SES2

9⁄64

1⁄4

SES3

5⁄32

Shpg. Wt. (lbs.)

1⁄4

0.1

5⁄16

0.1

5⁄16

- 7⁄16

0.1

SES4

1⁄4

7⁄16

9⁄16

0.1

SES5

19⁄64

9⁄16

3⁄4

0.2

5 PIECE STUD REMOVER SET This is a multi-purpose remover set: designed to remove threaded rod, broken (threadless) studs, any cylindrical stud or screw the unit can fit over. It is designed to grip rod for turning in either direction. Equipped with a 1⁄2" drive and hex bolster (21 mm) for use with wrench or ratchet. • Has three rods in unit which grip and allow studs to be turned without damaging the threads. • Includes sizes: 1⁄4", 5⁄16", 3⁄8" and 7⁄16".

Part No.

Description

Shpg. Wt. (lbs.)

SRK5

Stud Remover Set

1.3

STUD REMOVERS This is a multi-purpose remover: designed to remove threaded rod, broken (threadless) studs, any cylindrical stud or screw the unit can fit over. It is designed to grip rod for turning in either direction. Equipped with a 1⁄2" drive and hex bolster (21 mm) for use with wrench or ratchet. It has three rods in unit which grip and allow studs to be turned without damaging the threads.

230

Part No.

Capacity (in.)

Drive Size (in.)

Shpg. Wt. (lbs.)

SSP1208

1⁄4

1⁄2

0.2

SSP1210

5⁄16

1⁄2

0.2

SSP1212

3⁄8

1⁄2

0.3

SSP1214

7⁄16

1⁄2

0.3

www.westwardtools.ca

W231-10.qxp

2/12/10

3:12 PM

Page 231

MEASURING, TEST, INSPECTION TOOLS

Calipers . . . . . . . . . . . . . . . . . . . . . . .232 Micrometers . . . . . . . . . . . . . . . . . . . .233 Gauge Sets . . . . . . . . . . . . . . . . . . . . .234 Dial Indicators . . . . . . . . . . . . . .235-236 Precision Squares . . . . . . . . . . . . . . .236 Center & Pitch Gauges . . . . . . . . . . . .237 Angle Finders . . . . . . . . . . . . . . . . . . .237 Squares . . . . . . . . . . . . . . . . . . . . . . .238 Feeler Gauges . . . . . . . . . . . . . . . . . .239 Tape Measures . . . . . . . . . . . . . .240-241 Tape Reels . . . . . . . . . . . . . . . . . . . . .242 Levels . . . . . . . . . . . . . . . . . . . . . . . . .244 Inpection Tools . . . . . . . . . . . . . .245-247 Lightning . . . . . . . . . . . . . . . . . . .248-250 Extension Cords . . . . . . . . . . . . .251-254 Flashlights . . . . . . . . . . . . . . . . .255-256 Cable Ties . . . . . . . . . . . . . . . . . .257-258

2/9/10

10:23 AM

Page 232

PRECISION MEASURING TOOLS

ELECTRONIC CALIPERS • • • • • •

Hardened stainless steel construction. Fine adjustment for precision measuring. Easy to use function buttons for on/off, inch/metric and zero. Features auto shut-off for power conservation. Large LED display for easy reading. High impact case for safe storage.

Part No.

Range

Resolution

Shpg. Wt. (lbs.)

6JR93

0 - 6"/150 mm

0.0005"/0.01 mm

0.8

6JR94

0 - 8"/200 mm

0.0005"/0.01 mm

1.1

DIAL CALIPERS • • • • • •

Hardened stainless steel main beam for durability. Satin chrome finish with black marking for easy reading. Large clear dial graduations, quick reading. Sharp edge inside/outside contacts for easy access to work. Fine adjustment knurl for easy one hand use. High impact case for safe storage.

Part No.

Range (in.)

Resolution (in.)

Shpg. Wt. (lbs.)

5LD57

0-6

0.001

0.7

5LD60

0-8

0.001

1.0

5LD49

0 - 12

0.001

2.0

STAINLESS STEEL VERNIER CALIPERS • • • •

Hardened stainless steel construction with beveled lower jaws and pointed upper jaws. Permanent abrasion resistant black graduation on satin finish for easy reading. Screw lock holds position firmly. High impact case for safe storage.

Part No. 5LD59

Range

Resolution

Shpg. Wt. (lbs.)

0 - 6"/150 mm

0.001"/0.02 mm

0.7

5LD61

0 - 8"/200 mm

0.001"/0.02 mm

0.8

5LD51

0 - 12"/300 mm

0.001"/0.02 mm

2.0

OUTSIDE ELECTRONIC MICROMETER • • • •

Forged steel frame with satin chrome finish and hardened precision ground spindle. Large LCD display with 5 function buttons for easy reading and conversion. Carbide tipped measuring surfaces for accuracy. High impact case for safe storage.

Part No. 6JR86

232

Range

Resolution

Shpg. Wt. (lbs.)

0 - 1"/25.4 mm

0.00005"/0.001 mm

1.1

www.westwardtools.ca

2/9/10

10:24 AM

Page 233

PRECISION MEASURING TOOLS DIGITAL MICROMETER – MECHANICAL COUNTER • • • • •

Hardened and precision ground spindle. Forged steel frame with satin chrome finish on sleeve and spindle. Carbide tipped measuring faces. Ratchet stop and lock nut mechanism. High impact case for safe storage.

Part No.

Range (in.)

Graduation (in.)

Shpg. Wt. (lbs.)

5LD47

0-1

0.0001

0.6

6JR88

1-2

0.0001

0.7

OUTSIDE MICROMETERS • Hardened precision ground spindles with carbide tipped measuring surfaces for accuracy. • Forged steel frame with baked enamel finish. • Ratchet stop and positive locking clamp mechanism for easy use. • High impact case for safe storage.

Part No.

Range (in.)

Graduation (in.)

Shpg. Wt. (lbs.)

5LD48

0-1

0.0001

0.6

5LD50

1-2

0.0001

0.7

5LD53

2-3

0.0001

1.0

3 PIECE MEASURING SET • White face dial is easy to read. • Includes 0 - 1" micrometer (5LD47), 0 - 6" dial caliper (5LD57), and 6" steel ruler (6JR91). • High impact case for safe storage.

Part No.

Description

5LD55

Micrometer, Caliper and Rule Set

Shpg. Wt. (lbs.) 2.2

3 PIECE OUTSIDE MICROMETER SET • Includes: 0 - 1", 1 - 2", 2 - 3" outside micrometer. • Hardened precision ground spindles with carbide tipped measuring surfaces for accuracy. • Forged steel frame with baked enamel finish. • Ratchet stop and positive locking clamp mechanism for easy use. • High impact case for safe storage.

Part No.

Description

5LD54

3 Piece Micrometer Set

www.westwardtools.ca

Shpg. Wt. (lbs.) 2.0

233

2/9/10

10:25 AM

Page 234

PRECISION MEASURING TOOLS

0 – 4" DEPTH MICROMETER • • • •

Ratchet stop for constant and repetitive measurement. Interchangeable rods with lapped measuring end. 21⁄2" hardened and ground base. Includes high impact case for safe storage.

Part No. 6JR81

Range (in.)

Graduation (in.)

Shpg. Wt. (lbs.)

0-4

0.001

0.3

0 – 6" DIGITAL DEPTH MICROMETER – MECHANICAL COUNTER • • • •

Ratchet stop for constant and repetitive measurement. Interchangeable rods with lapped measuring end. 21⁄2" hardened and ground base. Includes high impact case for safe storage.

Part No. 6JR82

Range (in.)

Graduation (in.)

Shpg. Wt. (lbs.)

0-6

0.001

0.4

SMALL HOLE GAUGE SET • • • •

Fully hardened measuring surface. Flat bottom measuring range 1⁄8" – 1⁄2". For measuring inside diameters or small shallow holes or slots. Pouch included for easy storage.

Part No.

Description

Range (in.)

Shpg. Wt. (lbs.)

6JR89

4 Piece Set

0.125 - 0.500

0.3

TELESCOPING GAUGE SET For measuring holes, slots and recesses up to 6 inches. Constant spring pressure gives uniform contact. Both plungers are easily locked with a slight turn of a knurled screw on the end of the handle. • Measuring range 5⁄16" – 6". • Constant spring tension for uniform feel. • Satin chrome finish and self centering feature. • Pouch included for easy storage.

234

Part No.

Description

Range (in.)

Shpg. Wt. (lbs.)

6JR92

6 Piece Set

0.315 - 6.000

0.7

www.westwardtools.ca

2/9/10

10:26 AM

Page 235

PRECISION MEASURING TOOLS DIAL INDICATORS • • • • •

Knurled bezel rotates 360°. Stainless steel spindle rack and contact points. Back lug and 3⁄8" D stem. Range per revolution 0.1". 0.001" graduations.

Range (in.)

Range Per Revolution (in.)

Graduation (in.)

Shpg. Wt. (lbs.)

5LD56

0.500

0.1

0.001

0.5

5LD52

1.000

0.1

0.001

0.5

Part No.

ELECTRONIC INDICATOR • • • • • • •

0.0001"/0.001 mm revolution. Large LCD for easy reading. Instant inch/mm conversion. Zero setting at any position. ABS function. Power on/off. High impact case included for safe storage.

Part No. 6JR85

Range

Resolution

Shpg. Wt. (lbs.)

0 - 0.500"/12.7 mm

0.0001"/0.001 mm

0.6

TEST INDICATOR For easy and accurate measurements of deep or narrow areas and other surfaces not accessible with a dial indicator. • 0.0005" graduations. • Includes 5⁄32" and 3⁄8" mounting shanks. • Adjustable contact point. • Fully jeweled movement. • High impact case included for safe storage.

Part No. 6JR83

Range (in.) 0.03

Graduation (in.) Dial Reading Shpg. Wt. (lbs.) 0.0005

0 - 15 - 0

0.4

MAGNETIC BASE • Magnetic V-base has 130 lbs. pull capacity. • On/off release switch to release magnet. • Includes base, rods, and swivel clamp.

Part No.

Description

Shpg. Wt. (lbs.)

5LD66

Magnetic Base

3.5

www.westwardtools.ca

235

2/9/10

10:28 AM

Page 236

PRECISION MEASURING TOOLS

0 – 1" DIAL INDICATOR WITH MAGNETIC BASE • • • •

Dial indicator has 3⁄8" stem and lug back. 0.001" graduations. Magnetic V-base has 130 lbs. pull capacity. Includes base, rods, swivel clamp, and dial indicator.

Part No. Description 5LD62

Shpg. Wt. (lbs.)

Magnetic Base with 1" Dial Indicator

3.7

SQUARE SET • • • • • •

4 piece combination square. Hardened cast center and square head. Stainless steel blade. With scriber and spirit level. Reversible protractor graduated 180°. High impact case for safe storage.

Part No.

Size (in.)

Graduation

Shpg. Wt. (lbs.)

8, 16, 32, 64ths

2.2

6JR79

CALIPERS Easily adjustable nut for making quick and accurate measurements.

Part No. Description

Size (in.)

Shpg. Wt. (lbs.)

CAN6

Inside Calipers

0.1

CAU6

Outside Calipers

0.1

FLAT LEG DIVIDERS The divider's legs are made of flat stock and are very durable. The nut moves smoothly for precise measurements.

Part No. Description FLD6

Divider

Size (in.)

Shpg. Wt. (lbs.)

0.1

STEEL PROTRACTORS • • • •

Graduation from 0 – 180° in opposite directions. 6" blade can be locked firmly at any angle. Knurled thumb lock nut. High impact case included.

Part No. Description 6JR87

236

Rectangular Head

Shpg. Wt. (lbs.) 0.2

www.westwardtools.ca

2/9/10

10:29 AM

Page 237

GAUGES CENTER GAUGE • Graduated in 14ths, 20ths, 24ths, and 32nds of an inch for checking threads per inch. • 60° angles for US standard threads.

Part No.

Description

Shpg. Wt. (lbs.)

6JR80

Center Gauge

0.1

DRILL GAUGE • Quickly identifies drill sizes. • Made from heavy gauge steel. • Hole sizes are permanently marked.

Part No.

Description

DG1

Sizes Drills In SAE (1⁄64" - 1⁄2") by 64ths

Shpg. Wt. (lbs.) 0.1

PITCH GAUGES Part No.

Range

No. of Sizes

Shpg. Wt. (lbs.)

PGS

12 - 40 SAE

0.1

PGM

0.5 - 1.75 Metric

0.1

ROUND HEAD PROTRACTORS • Permanently etched markings. • With easy to read gauge for depth measurements.

Part No.

Description

Shpg. Wt. (lbs.)

AF10

Round Head

0.2

41⁄8" ANGLE FINDER • 41⁄8" (105 mm) long. • For angles 0 – 90°.

Part No.

Description

AF4

41⁄8"

Protractor

Shpg. Wt. (lbs.) 0.2

6" PLASTIC ANGLE FINDER • • • •

For measuring and marking the degrees of outside, inside and sloped angles. Black graduation marks for easy reading. Equipped with a brass locknut. For angles 0 – 165°.

Part No.

Description

Shpg. Wt. (lbs.)

AF150

6" Protractor

0.3

www.westwardtools.ca

237

2/9/10

10:29 AM

Page 238

MEASURING TOOLS 20" PLASTIC ANGLE FINDER • 9" (230 mm) x 20" (500 mm). • For angles 0 – 180°.

Part No.

Description

Shpg. Wt. (lbs.)

AF500

20" Protractor

2.2

6" RIGID STEEL RULER Part No. 6JR91

Graduation

Shpg. Wt. (lbs.)

8ths, 16ths, 32nds and 64ths

0.1

POCKET RULER Pocket ruler with stainless steel clip. Sliding clip can be used as a depth gauge.

Part No.

Length (in.)

Shpg. Wt. (lbs.)

0.1

A20

RAFTER FRAMING SQUARE • With reversing reading scale. • 16" x 24".

Part No.

Description

XB650

Steel

Shpg. Wt. (lbs.) 2.0

COMBINATION SQUARE • With level vial and scratch awl. • Combination inch and metric.

238

Part No.

Description

CS12

12 Inch

Shpg. Wt. (lbs.) 0.4

www.westwardtools.ca

2/9/10

10:31 AM

Page 239

THICKNESS GAUGES UNIVERSAL FEELER GAUGE • 26 blades all 31⁄2" (89 mm) long. • Sized 0.0015 to 0.25 (0.038 mm to 0.635 mm), by thousandths. • One piece handle.

Part No.

Description

Shpg. Wt. (lbs.)

GT26

Feeler Gauge

0.3

METRIC THICKNESS GAUGE • Tempered steel with metric sizes permanently etched on each blade. • One-piece handle. • 25 blades all 3" (76.2 mm) long. • Sizes: 0.04 0.05 0.06 0.07 0.08 0.09 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.45 0.50 0.55 0.60 0.65 0.70 0.75 0.80 0.85 0.90 0.95 1.00 mm.

Part No.

Description

GT25

Metric Feeler Gauge

Shpg. Wt. (lbs.) 0.3

GO-NO-GO FEELER GAUGE 22 Blade Sizes: 0.004-0.006 0.005-0.007 0.006-0.008 0.007-0.009 0.008-0.010 0.009-0.011 0.010-0.012 0.011-0.013 0.012-0.014 0.013-0.015 0.014-0.016 0.015-0.018 0.016-0.018 0.017-0.019 0.018-0.020 0.019-0.021 0.020-0.022 0.021-0.023 0.022-0.024 0.023-0.025 0.024-0.026 0.025-0.027.

Part No.

Description

GT22

22 Piece Feeler Gauge

Shpg. Wt. (lbs.) 0.4

BRASS FEELER GAUGE • 6 blades are 1⁄2" wide, 35⁄16" long. • 0.006", 0.008", 0.010", 0.012", 0.014", 0.016" sizes. • Blades are etched with both decimal and metric sizes.

Part No.

Description

GT6B

Brass Feeler Gauges

Shpg. Wt. (lbs.) 0.2

IGNITION GAUGE SET • Pocket size gauge for use in hard to reach places. • Blades are 1⁄4" (6.4 mm) wide, 13⁄4" (44 mm) long with locknut. • 17 blades sizes 0.010 to 0.035 (0.254 mm to 0.899 mm).

Part No.

Description

GT17

Ignition Gauge Set

www.westwardtools.ca

Shpg. Wt. (lbs.) 0.2

239

2/9/10

10:32 AM

Page 240

TAPE MEASURES 12 BLADE OFFSET GAUGE 12 blades all 4" long sized: 0.008 0.010 0.013 0.014 0.015 0.016 0.018 0.019 0.020 0.025 0.026.

Part No.

Description

Shpg. Wt. (lbs.)

GTF12

Offset Feeler Gauges

0.3

PROFESSIONAL SERIES TAPE MEASURES • • • • •

ABS case with rubber molded grip. Heavy-duty nylon coated blade. Triple riveted end hook. Shock absorbing blade return bumper. Hi-viz orange.

Blade Width (in.)

Blade Length

Shpg. Wt. (lbs.)

MT12

5⁄8

3.5 m/12'

0.4

MT16

3⁄4

5 m/16'

0.6

MT25

7.5 m/25'

1.2

Part No.

ECONOMY TAPE MEASURES • • • •

Rugged top surface for better grip. Thumb lock system holds blade in place. Lacquer coated steel blade. High impact ABS case.

Blade Width (in.)

Blade Length

Shpg. Wt. (lbs.)

MT10E

1⁄2

3 m/10'

0.3

MT16E

3⁄4

5 m/16'

0.5

MT25E

7.5 m/25'

1.1

Part No.

TAPE MEASURES • • • •

Chrome plated ABS case. Lacquer coated blade. Special shock absorbing bumper. “Top-Stop” secures blade in place.

Blade Width (in.)

Blade Length

Shpg. Wt. (lbs.)

3⁄4

5 m/16'

0.5

7.5 m/25'

1.1

Part No.

240

www.westwardtools.ca

2/9/10

10:33 AM

Page 241

TAPE MEASURES WIDE BLADE TAPE MEASURE • • • • •

11⁄4" wide for extra long standout. Nylon coated blade. Compact design with non-slip rubber grip. Triple riveted end hook. Shock absorbing blade return bumper.

Part No. X4

Blade Width (in.)

Blade Length

Shpg. Wt. (lbs.)

11⁄4

7.5 m/25'

1.3

CARPENTER’S MEASURING TAPE • • • •

Inch only with 16" stud markings and 197⁄32" floor joist markings. Rubber grip ABS casing. Nylon coated steel blade. Positive thumb lock.

Blade Width (in.)

Blade Length (ft.)

Shpg. Wt. (lbs.)

MT16C

3⁄4

0.6

MT25C

1.1

Part No.

STAINLESS STEEL TAPE MEASURES • • • •

ABS housing with rubber grip. Stainless steel blade with nylon coating. Stainless steel spring hook. 7 ft. stand-out length.

Part No.

Blade Width (in.) Blade Length (in.)

Shpg. Wt. (lbs.)

MT16SS

3⁄4

0.6

MT25SS

1.1

LONG STEEL TAPE MEASURE • • • • •

High impact resistant ABS case. Comfortable non-slip rubber grip. Folding rewind handle for fast retrieving. Nylon coated steel blade. Folding end hook easy storage.

Part No. MT100

Blade Width (in.)

Blade Length

Shpg. Wt. (lbs.)

3⁄8

30 m/100'

1.1

www.westwardtools.ca

241

2/9/10

10:34 AM

Page 242

TAPE MEASURES FIBERGLASS TAPE REELS • 3X gear drive system for faster rewind. • High impact case with comfortable rubber hand grip. • 40 Fibreglass strands for extra tensile strength.

Part No.

Blade Width (in.)

MTR100

1⁄2

30 m/100'

1.2

MTR300

1⁄2

90 m/300'

3.5

Blade Length

Shpg. Wt. (lbs.)

FAST REWIND TAPE REEL • • • • • • •

Extra wide heavy-duty blade for 2 times blade strength. 3:1 gear driven. Two colour blade with 2-side printing. Comfortable non-slip rubber grip handle. Metal reinforced crank handle for durability. Ground stake for accurate measurement. Heavy-duty end hook with loop.

Part No. MTR100F

Blade Width 3⁄4"/19

Blade Length

Shpg. Wt. (lbs.)

30 m/100'

1.3

FAST REWIND LONG STEEL TAPE • • • • • • •

3:1 gear driven. High impact ABS case. Shock resistant rubber protection. Comfortable, non-slip rubber grip handle. Folding rewind handle for fast retrieval. Nylon coated blade. Metal end loop and claw.

Part No. MT100F

242

Blade Width 3⁄4"/19

Blade Length

Shpg. Wt. (lbs.)

30 m/100'

1.1

www.westwardtools.ca

2/9/10

10:35 AM

Page 243

TAPE MEASURES

PROFESSIONAL MEASURING WHEELS • • • • • • •

Ergonomic pistol designed grip handle. Convenient reset button and trigger brake in handle. 5 digit magnified counter. 12.5" wheel complete with kickstand. Collapsible handle with carrying loop. Dirt scraped designed to keep wheel accurate. Zero-point indicator for accurate start.

Part No.

Description

Shpg. Wt. (lbs.)

MTW12

Imperial 9,999 ft.

3.0

MTW12M

Metric 9,999 m

3.0

COMPACT 4" MEASURING WHEEL • • • • •

Telescoping handle with soft grip for comfort. 5-digit magnified counter with push button reset. 3 section handle extends to 40", reduces to 20" for easy storage. Hanging hole for easy storage. Available in feet (999 ft.) or meters (999 m).

Part No.

Description

Shpg. Wt. (lbs.)

MTW4

Imperial 999 ft.

1.2

MTW4M

Metric 999 m

1.2

DIGITAL LASER LEVEL Professional level body with two vials and one digital inclinometer. • Accuracy of vials: 0.5 mm/m. • Accuracy of inclinometer: +0.2°. • Working environment: 0° C to 40° C. • Humidity: 40 to 75% RH. • Laser class: II. • Laser output power: <1 mW. • Wave length: 650 nm. • Accurate to 0.5 mm per meter.

Part No.

Description

LLD02

Digital Laser Level

www.westwardtools.ca

Shpg. Wt. (lbs.) 1.3

243

2/9/10

10:36 AM

Page 244

LEVELS ALUMINUM MAGNETIC TORPEDO LEVEL • Aluminum frame for accuracy and durability. • Top-read center vial. • 3 vials for plumb, level and 45°.

Length (in.)

Number of Vials

Shpg. Wt. (lbs.)

0.6

Length (in.)

Number of Vials

Shpg. Wt. (lbs.)

0.3

Length (in.)

Number of Vials

Shpg. Wt. (lbs.)

LV24AHD

1.5

LV48AHD

3.6

Number of Vials

Shpg. Wt. (lbs.)

0.1

Part No.

Description

LV75TM

Magnetic

ABS MAGNETIC TORPEDO LEVEL • Shock resistant ABS. • Top-read center vial. • 3 vials for plumb, level and 45°.

Part No.

Description

LV9TE

Magnetic

HEAVY-DUTY ALUMINUM LEVELS • Heavy-duty I-beam construction. • Shock absorbing end caps. • Top-read center vial.

Part No.

PLASTIC LINE LEVEL • Lightweight ABS. • Slides easily on line.

Part No.

Description

LV1L

Line Level

FIBER OPTIC INSPECTION SCOPE • • • •

Equipped with illumination lamp for clear viewing. Flexible cables provide easy access to hard to reach spaces. More then 7,000 pixels with 40° field of view. Minimum viewing distance of 3 mm-max depends on ambient light conditions.

Cable Length (in.)

Cable Dia. (in.)

Shpg. Wt. (lbs.)

A162

0.31

3.2

A164

0.31

3.4

Part No.

244

www.westwardtools.ca

2/9/10

10:37 AM

Page 245

INSPECTION TOOLS

INSPECTION CAMERA Built with a tough flexible cable, it can easily change its shape without risk of damaging the unit. The cable can be bent into various shapes this will help you maneuver the cable into tight and awkward areas. Includes: • Storage case. • 36" flexible optical cable with LED light. • Magnetic tip. • Mirror tip. • 2.5 LCD monitor. • Cable diameter is 10 mm.

Part No.

Description

Shpg. Wt. (lbs.)

A167

2.5" LCD Video Borescope

11.0

LED INSPECTION LIGHT • Reaches into tight spots. • 15" flexible cable – 5 mm thickness. • Uses 3 AA batteries (batteries included).

Part No. A203

Cable Length (in.)

Cable Diameter (mm)

Shpg. Wt. (lbs.)

1.7

LED INSPECTION LIGHT WITH MAGNET • • • •

Reaches into tight spots. 18" flexible cable – 7 mm diameter. Magnet tip pick-up tool. Uses 3 AA batteries (batteries included).

Part No. A204

Cable Length (in.) Cable Diameter (mm) 18

Shpg. Wt. (lbs.) 1.9

JUMBO REFRACTOMETER • Tests concentrations of battery fluids, anti-freeze and cleaning solutions. • Percentage indicator indicates freezing points of both propylene glycol and ethylene glycol. • Can be used to check battery strength of electrolyte solution.

Part No.

Description

Shpg. Wt. (lbs.)

A163

Refractometer

2.0

www.westwardtools.ca

245

2/9/10

10:38 AM

Page 246

INSPECTION TOOLS ALCOHOL REFRACTOMETER Designed to provide accurate measurement of alcohol concentration in water solutions.

Part No.

Range

Accuracy

Shpg. Wt. (lbs.)

A166

0 - 80%

± 1.0%

2.0

BRIX-SUGAR REFRACTOMETER Designed for sugar related liquids (fruit juices, soft drinks, wine, honey) to monitor sugar concentrations in foods and beverages. Commonly used to check ripeness of fruit in the field or controlling concentrations during processing and packaging.

Part No. A165

Range 0 - 32% Brix

Minimum Divisions Accuracy 0.2% Brix

Shpg. Wt. (lbs.)

± 0.2% Brix

2.0

16" FLEXIBLE MAGNETIC PICK-UP TOOL & LIGHT Part No.

Description

Shpg. Wt. (lbs.)

A85

Lighted, Flexible Pick-Up Tool

0.4

TELESCOPIC CIRCULAR MIRROR • 2" diameter. • 9" length, extendable to 15".

Part No.

Description

Shpg. Wt. (lbs.)

A78

Telescopic Mirror

0.3

TELESCOPIC MAGNETIC RETRIEVING TOOL The detachable magnetic head swivels to reach into awkward spots. The tool extends up to 18", making it perfect for retrieving things in hard-to-reach places.

Part No.

Length (in.)

Shpg. Wt. (lbs.)

0.2

TELESCOPIC OVAL HEAD MIRROR • 1" x 2" oval. • 8" length, extendable to 27".

246

Part No.

Description

A79

Telescopic Mirror

Shpg. Wt. (lbs.) 0.3

www.westwardtools.ca

2/9/10

10:39 AM

Page 247

INSPECTION TOOLS MECHANIC'S STETHOSCOPE Locates source of engine noise. Identifies piston slap, worn gears, faulty valves, and defective bearings. Shock proof handle.

Part No.

Description

Shpg. Wt. (lbs.)

A13

Stethoscope

0.2

MAGNETIC PICK-UP TOOL Small enough to pick up objects in tight places. Length: minimum 102 mm (4") maximum 483 mm (19").

Part No.

Length (in.)

Shpg. Wt. (lbs.)

0.1

HEAVY-DUTY MAGNETIC PICK-UP TOOL Pocket clip. Pick up capacity 3.5 lbs. Telescopic. Length: minimum 120 mm (43⁄4") maximum 600 mm (24").

Part No.

Length (in.)

Shpg. Wt. (lbs.)

0.2

PTM24

POCKET SCRIBER WITH MAGNETIC PICK-UP & BALL POINT PEN • Sharp tungsten carbide tip. • Magnet on end. • Remove magnetic tip to reveal pen.

Part No.

Description

Shpg. Wt. (lbs.)

A87

Pick-up Tool/Scribe

0.2

MAGNETIC PARTS TRAY Stainless steel magnetic base with non-marring rubber coating. Holds small parts, hardware and tools in any position.

Part No.

Description

MT1

Round, Dia. 53⁄8", Depth 11⁄8"

MT2

91⁄4"

Rectangular

Shpg. Wt. (lbs.) x

53⁄8"

11⁄8"

1.5 (L x W x D)

3.0

20" FLEXIBLE MAGNETIC PICK-UP TOOL Part No.

Description

A86

Flexible Magnetic Pick-up Tool

www.westwardtools.ca

Shpg. Wt. (lbs.) 0.4

247

2/9/10

10:40 AM

Page 248

LIGHTING

MAGNIFIER LIGHT • Spring balanced 45" extension arm with 3 conductor cord. • Steel shade with a precise diopter lens and a 22 W fluorescent circline bulb. • 110 volt / 60Hz. • Fixing clip with screw adjustment.

Part No.

Description

Shpg. Wt. (lbs.)

ML230

Illuminated Magnifier

10.0

GENERAL PURPOSE S-HANDLE UTILITY LIGHT Light unit features a steel S-handle with foam cushion grip. Die-cast aluminum housing. Light head is suitable for outdoor and wet locations. Tempered safety glass lens with waterproof gasket and metal protective grill. High visibility yellow powder coated finish. 500 W halogen bulb included with each light head. Dimensions 220 mm wide x 350 mm high. On/off switch.

Part No. Description TL500U Utility Light

Lamp Watts

Cord Type

Cord Length (ft.)

Lamp Guard

Colour

Shpg. Wt. (lbs.)

500

SJT

Metal

Yellow

8.5

TL1000T

TL500T

HEAVY-DUTY TRIPOD LIGHT STANDS Lamps feature a telescoping pole that extends to a height of 76" with a collapsible 42" wide 3 leg base to provide stability to the light standard. • Push on/off switch. • Heads have tempered safety glass lens and protective wire grills. • CSA listed for wet locations. • 500 watt quartz halogen bulbs included. • For outdoor use only.

Part No. Description TL500T

Single-Head Halogen Utility Light

TL1000T Double-Head Halogen Utility Light

248

Lamp Maximum Maximum Base Cord Cord Lamp Shpg. Watts Height (in.) Diameter (in.) Type Length (ft.) Guard Colour Wt. (lbs.) 500

SJT

6.0

Metal

Yellow

13.0

500

SJT

6.0

Metal

Yellow

15.0

www.westwardtools.ca

2/9/10

10:41 AM

Page 249

LIGHTING

QUARTZ HALOGEN CLAMP LIGHT Lamp features a multi position, adjustable swivel head and clamp system for ease and flexibility in mounting. Vinyl coated non-marring clamp. Die-cast aluminum housing. Light head suitable for outdoor and wet locations. Tempered safety glass with engineered reflector to effectively control light output. High visibility yellow powder coated finish. 250 W halogen bulb included.

Part No. Description TL250C

Lamp Watts

Cord Type

Cord Length (ft.)

Lamp Guard

Colour

Shpg. Wt. (lbs.)

250

SJT

Metal

Yellow

12.0

Clamp Lamp

REPLACEMENT QUARTZ LAMPS Quartz halogen replacement bulbs for portable task lights; 150 W, 250 W, 500 W long life, carded 2 per package.

Lamp Watts

Pkg. Qty.

Shpg. Wt. (lbs.)

TLB150 Quartz Halogen Bulb

Part No. Description

150

0.2

TLB250 Quartz Halogen Bulb

250

0.2

TLB500 Quartz Halogen Bulb

500

0.2

TEMPORARY JOBSITE STRING LIGHTING • • • •

NEMA 1-15 plug end. Non-metallic bulb guards. Sockets on every 10' center. Reliable, portable and provides excellent lighting at jobsites.

Length (ft.)

Number of Sockets

Guard Type

Shpg. Wt. (lbs.)

String Light Set

Plastic

8.0

String Light Set

100

Plastic

16.0

Part No.

Description

YELS125 YELS1210

METAL STRING LIGHTS • • • • • •

100'. PVC coated steel light guards. SJTW 12/3 Cord. Sockets every 10' on center. Maximum 150W Bulbs. NEMA 5-15P plug end and NEMA 5-15R socket.

Part No.

Description

YELS1210M

String Light

YELS1210MC

Replacement Guard

www.westwardtools.ca

Length (ft.)

Number of Sockets Shpg. Wt. (lbs.)

100

16.0

—

0.2

249

2/9/10

10:43 AM

Page 250

LIGHTING GENERAL PURPOSE WORK LIGHT WITH METAL GUARD Durable metal housing for semi-rugged use. Grounded outlet in handle.

Part No. YEWL08M

Wire Ga/Cond

Voltage

16/3

120

Shpg. Maximum Wt. Wattage (lbs.) 75.0

1.4

GENERAL PURPOSE WORK LIGHT WITH PLASTIC GUARD Durable plastic housing for semi-rugged use. Grounded outlet in handle.

Part No. YEWL08P

Wire Ga/Cond

Voltage

16/3

120

Shpg. Maximum Wt. Wattage (lbs.) 75

1.4

LED PROFESSIONAL WORK LAMP • • • • •

360° fold away metal swivel hook. Unit contains 60 high intensity LEDs. Shatter proof polycarbonate lens. Highly polished reflector for increased light spread. Egonomic and compact design with rubber grips.

Part No.

Description

WLL60C

60 LED Hand Lamp

Shpg. Charge Active Life Wt. (lbs.) Time (hrs.) (hrs.) 2

2.2

LED RECHARGEABLE WORK LAMP • • • • • • • •

360° fold away plastic swivel hook. Highly polished reflector for increased light spread. Shatter proof polycarbonate lens. Unit contains 30 high intensity LEDs. LED glows red when battery is low. Durable shock and weather resistant rubber housing. Ergonomic and compact design with rubber grips. Includes wall and 12V charging cord.

Part No. WLL30R

250

Description 30 LED Rechargeable Hand Lamp

Shpg. Wt. No. of Conductors Type AWG (lbs.) 2

SJTW

2.2

www.westwardtools.ca

2/9/10

10:44 AM

Page 251

POWER CORDS

CONTRACTOR EXTENSION CORDS The Power First contractor grade extension cord remains flexible up to -50° C. This cord features an oil resistant jacket, heavy-duty, strain relief cord ends and exceptional abrasion resistance.

Part No.

Wire Ga/Cond

Cord Length (m)

Rating Volts (AC)

Rating Amps

Jacket Type

Jacket Colour

Cord Outlet

Shpg. Wt. (lbs.)

YE11408 YE11415

14/3

125

SJTW

Yellow

Single

3.0

14/3

125

SJTW

Yellow

Single

5.0

YE11430

14/3

125

SJTW

Yellow

Single

10.0

YE11215

12/3

125

SJTW

Yellow

Single

6.0

YE11230

12/3

125

SJTW

Yellow

Single

11.0

LIGHT-DUTY EXTENSION CORDS • Weatherproof. • Resistant to UV rays. • Stays flexible up to -40° C.

Part No.

Wire Ga/Cond

Cord Length (m)

Rating Volts (AC)

Rating Amps

Jacket Type

Jacket Colour

Cord Outlet

Shpg. Wt. (lbs.)

YE21603

16/3

125

SJTW

Orange

Single

0.8

YE21605

16/3

125

SJTW

Orange

Single

1.0

YE21610

16/3

125

SJTW

Orange

Single

2.0

YE21615

16/3

125

SJTW

Orange

Single

4.0

YE21630

16/3

125

SJTW

Orange

Single

8.0

TRIPLE OUTLET EXTENSION CORDS • • • • • • • •

Remains flexible to -50° C. Heavy-duty cord ends STJW. Lit cord end indicates when power is on. Indoor/outdoor. Water resistant. Grounded outlet. Hi-visibility yellow. Triple tap.

Part No.

Wire Ga/Cond

Cord Length Rating Volts (m) (AC)

Rating Amps

Jacket Type

Jacket Colour

Cord Outlet

Shpg. Wt. (lbs.)

YE11408-3

14/3

125

SJTW

Yellow

Triple

3.0

YE11415-3

14/3

125

SJTW

Yellow

Triple

5.0

YE11430-3

14/3

125

SJTW

Yellow

Triple

10.0

YE11215-3

12/3

125

SJTW

Yellow

Triple

6.0

YE11230-3

12/3

125

SJTW

Yellow

Triple

11.0

www.westwardtools.ca

251

2/9/10

10:45 AM

Page 252

POWER CORDS HEAVY-DUTY WINTER OUTDOOR EXTENSION CORDS • • • • • •

SJEOW cord stays flexible to -60°C. Lit plug ends for ease of use in low-light. Oil resistant jacket. Heavy-duty strain relief cord ends. NEMA 5-15P plug end and NEMA 5-15R socket. cUL certified.

Part No.

Wire Ga/Cond

Cord Length (m)

Colour

Cord Outlet

Shpg. Wt. (lbs.)

YE31608

16/3

Red

Single

1.6

YE31615

16/3

Red

Single

3.2

YE31630

16/3

Red

Single

5.8

YE31408

14/3

Yellow

Single

2.3

YE31415

14/3

Yellow

Single

4.3

YE31430

14/3

Yellow

Single

8.2

YE31208

12/3

Yellow

Single

3.3

YE31215

12/3

Yellow

Single

6.3

YE31230

12/3

Yellow

Single

12.0

YE31015

10/3

Yellow

Single

10.5

YE31030

10/3

Yellow

Single

21.0

YE31208-3

12/3

Yellow

Triple

3.5

YE31215-3

12/3

Yellow

Triple

6.5

YE31230-3

12/3

Yellow

Triple

12.3

CONTRACTOR “SOFT JACKET” EXTENSION CORDS • • • • • • •

SJTW cord stays flexible to -50° C. Lit plug ends for ease of use in low-light. Oil resistant jacket. Heavy-duty strain relief cord ends. NEMA 5-15P plug end and NEMA 5-15R socket. Green colour. cUL certified.

Part No.

Wire Ga/Cond

Cord Length (m)

Shpg. Wt. (lbs.)

YE41610

16/3

3.0

YE41615

16/3

4.0

YE41630

16/3

8.0

YE41410

14/3

3.5

YE41415

14/3

5.0

YE41430

14/3

10.0

MULTI-PLUG EXTENSION CORD Most extension cords have outlets lumped together, but our multi plug extension cord has three grounded outlets spaced 8' apart for power where you need it. • 3 evenly spaced outlets. • NEMA 5-15P plug end and NEMA 5-15R socket. • Yellow colour. • cUL certified.

Part No. YEPS1208

252

Wire Ga/Cond

Cord Length (m)

Shpg. Wt. (lbs.)

12/3

4.0

www.westwardtools.ca

W253-10.qxp

2/12/10

3:17 PM

Page 253

POWER CORDS

50 FT. CORD REELS • • • •

Cord reel with 4 outlets and built in circuit breaker. General duty STJW cord. Carrying handle and hand crank. Sturdy base.

AC Outlets

Cord Inc.

AWG

No. of Cond.

Length (ft.)

Type

Voltage

Amperage Rating

YECR1215

Yes

SJTW

125

14.5

13.0

YECR1415

Yes

SJTW

125

11.5

26.0

Part No.

Shpg. Wt. (lbs.)

100 FT. CORD REELS • • • •

Cord reel with 4 outlets and built in circuit breaker. General duty SJTW cord. Carrying handle and hand crank. Sturdy base.

AC Outlets

Cord Inc.

AWG

No. of Cond.

Cord Length (ft.)

Type

Voltage

Amperage Rating

Shpg. Wt. (lbs.)

YECR1230

Yes

100

SJTW

125

13.0

YECR1430

Yes

100

SJTW

125

26.0

Part No.

IN-LINE GFCI CORD SET • Outdoor rated. • Manual test-reset buttons. • 2 ft. cord length.

NEMA Configuration Part No. YE1122GF

Rating

Receptacle

Plug

Wire Size

Cord Outlet

Shpg. Wt. (lbs.)

15 A, 125 V

5-15R

5-15P

12/3

Triple

1.0

No. of Pilot Light Outlets Switch

Housing

OUTLET POWER BARS Features: • Integrated circuit breaker with light. • High impact housing in a white finish. • 115 V,15 A, 60 Hz.

Part No.

Description

YEPB618

Surge Protected Power Bar

YEPB718

Surge Protected Power Bar

www.westwardtools.ca

Material

Colour

Rated Joules

Cord Length Shpg. Wt. (ft.) (lbs.)

Yes

Plastic

White

5.9

1.3

Yes

Plastic

White

5.9

1.5

253

2/9/10

10:51 AM

Page 254

BOOSTER CABLES

BOOSTER CABLES • For use with top or side post batteries. • Flexible, low temperature jacket.

Part No.

Gauge Length (ft.) Amperage

Clamp

Shpg. Wt. (lbs.)

Professional Series YEBC120C

800

Parrot

16.0

500

Standard

12.0

Extra Heavy-Duty Series YEBC416C

BOOSTER CABLE CLAMPS Part No.

Amperage

Colour

Shpg. Wt. (lbs.)

YEBCC500R

500

Red

0.2

YEBCC500B

500

Black

0.2

YEBCC800R

800

Red

0.3

YEBCC800B

800

Black

0.3

Heavy-Duty

Professional

BLOCK HEATER CORDS • • • • •

SJTW cord stays flexible to -50° C. 16/3 gauge. NEMA 5-15P plug end and NEMA 5-15R socket. Excellent for use with block heaters, battery warmers and interior car warmers. cUL certified.

Part No.

254

Wire Ga/Cond

Cord Length (m)

Shpg. Wt. (lbs.)

YE21603B

16/3

1.0

YE21605B

16/3

1.5

www.westwardtools.ca

2/9/10

10:52 AM

Page 255

FLASHLIGHTS

POWER INVERTERS Two 115V outlets allow running multiple items at the same time. Allows for a wide variety of electrical devices to be powered from a 12 VDC power source. Features built-in low battery alarm and shutdown, cooling fan, and overload protection. Clamps are included to connect inverters directly to the battery source.

Part No.

Operating Voltage

EN30012

115

EN60012

115

Continuous Watts

Peak Watts

Shpg. Wt. (lbs.)

300

600

2.5

600

1,200

6.5

LED FLASHLIGHTS WSWFLA3AT: Features include aluminum alloy construction, 25 hour run time, push button tail switch, 1 watt 45 lumen bulb. WSWFLAR3AT: Features include aluminum alloy construction, polycarbonate lens, push button switch, 3 watt 65 lumen bulb. WSWFLA3TATF: Features include aluminum alloy construction, polycarbonate lens, metal clip, push button tail switch, 1 watt 80 lumen Luxeon LED bulb. WSWFLAR2DAT: Features include aluminum alloy construction with a rubberized grip, poly carbonate lens, push button tail switch with lock on or momentary on function, 1 watt 80 lumen Luxeon LED bulb.

Part No.

Description

Shpg. Wt. (lbs.)

FLA3AT

3 AAA 45 Lumen LED Flashlight

0.2

FLAR3TA

3 AAA 65 Lumen LED Flashlight

0.4

FLA3TATF

3 AAA 80 Lumen LED Flashlight

0.5

FLAR2DAT

2 AA 80 Lumen LED Flashlight

0.3

LUXEON K2 LED FLASHLIGHT • • • • • •

6 watt Luxeon K2 LED bulb that produces a strong 300 ft. beam. Optimized reflector system for maximum light output. 130 lumens. Up to 30 hours of run time. Aluminum construction with a rubber sleeve. Lifetime bulb.

Part No.

Description

FLAR6DAF

6 AA LED Flashlight

Shpg. Wt. (lbs.) 1.3

INDUSTRIAL LED FLASHLIGHT • • • • •

Polycarbonate lens. Waterproof, chemical and grease resistant. Built-in battery indicator. 1 watt, 45 lumen bulb. Rubber booted push button switch.

Part No.

Description

FLP4DA

4 AA Industrial Flashlight

www.westwardtools.ca

Shpg. Wt. (lbs.) 1.7

255

2/9/10

10:53 AM

Page 256

FLASHLIGHTS LED LANTERN • • • •

3 watt, 65 lumen Luxeon bulb. Multi-position ratcheting stand. Uses 4 D-cell batteries or (1) 6 V lantern battery. Lifetime bulb.

Part No.

Description

FLL4D6V

LED Lantern

Shpg. Wt. (lbs.) 2.9

LED HEADLAMP • • • • •

Lifetime bulb. 65 lumens of light output. 3 watt Luxeon LED. Push button switch. Uses 3 AAA batteries.

Part No.

Description

FLH3TADP

LED Headlamp

Shpg. Wt. (lbs.) 0.4

LED FLEX LIGHT • • • • • • •

Flex light can be used with or without 17" flex attachment. Flex attachment allows for hands free use. Anodized aluminum body. Push button end cap. 20 hours run time. 45 lumens. Uses 3 AA batteries.

Part No.

Description

FLA3DAFC

3 AA LED Flex Light

Shpg. Wt. (lbs.) 0.3

SELF POWERED LED FLASHLIGHT Emergency lighting and mobile phone charging. Switchable LED to bright or dim. Hand crank the flashlight for 3 – 5 minutes to activate the internal battery when left idle for more than 60 days or for the first time use. Provides up to seven minutes of mobile phone talk time. • 5 White LEDs – 60 minutes run time, 1 LED – 120 minute run time. • Green LED charging indicator, Red LED low battery indicator. • 365 days stand-by lighting.

256

Part No.

Description

FL5LDSP

5 LED Self Powered Flashlight

Shpg. Wt. (lbs.) 0.5

www.westwardtools.ca

2/9/10

10:54 AM

Page 257

ELECTRICAL TAPE PVC ELECTRICAL TAPE 7 mil CSA approved PVC electrical tape.

Part No.

Size

101

3⁄4"

100

3⁄4"

Temperature Range (° C)

Shpg. Wt. (lbs.)

x 66'

-18 to 90

0.2

x 60'

-7 to 80

0.2

GENERAL PURPOSE PVC COLOUR CODING TAPE 7 mil x 3⁄4" x 66'. CSA approved. Minimum temperature -10° C, maximum temperature 90° C.

Part No. ET66B

Colour

Size

Shpg. Wt. (lbs.)

Blue

3⁄4"

x 66'

0.3

ET66R

Red

3⁄4"

x 66'

0.3

ET66G

Green

3⁄4"

x 66'

0.3

Yellow

3⁄4"

x 66'

0.3

ET66W

White

3⁄4"

x 66'

0.3

ET66BL

Black

3⁄4"

x 66'

0.3

ET66Y

SELF ADHESIVE TIE MOUNTS • Designed to support lightweight wire bundles when properly applied on any clean, smooth, grease-free surface. For heavy support, mounting hole is provided for screws. • To apply, simply peel off backing paper and apply mount to surface. • Material: UL approved nylon 66, 94V-2 (backed with adhesive tape). • WSWHC103 – heavy-duty.

Part No.

Length (mm) Width (mm) Height (mm) Without Tape Mounting Hole (mm) Packaging

Shpg. Wt. (lbs.)

HC101S

3.9

4.5

100 Pieces

0.2

HC102

5.0

100 Pieces

0.3

HC103

5.0

100 Pieces

0.3

NYLON CABLE CLAMPS • • • •

Material is UL approved NYLON 66, 94V-2. Designed to hold cables, tubes, and components. Interior edges are bevelled to protect cable insulation. Uses include appliances, electronics, and general wiring applications.

Part No.

Length (in.)

Capacity

Package Quantity

Shpg. Wt. (lbs.)

UC1

13⁄16

1⁄4

100

0.1

UC15

13⁄16

5⁄16

100

0.1

UC2

15⁄16

3⁄8

100

0.1

UC3

13⁄16

1⁄2

100

0.1

UC4

15⁄16

5⁄8

100

0.1

UC5

13⁄8

3⁄4

100

0.1

UC6

111⁄16

100

0.1

www.westwardtools.ca

257

2/9/10

10:55 AM

Page 258

CABLE TIES NYLON CABLE TIES Westward standard cable ties are made from U.L. approved natural nylon 6/6. Natural Nylon: • Normal service temperature range: -40° C to 85° C. • Flammability rating: UL 94V-2.

Length Part No.

(in.)

(mm)

Width (mm)

100

Bundle Diameter

Weather Resistant Nylon: • Carbonate “A” was added for greater resistance to ultraviolet light in outdoor applications. Specifications: • Manufactured to comply with milspec drawings no. MS-3367. • Tensile strength meets or exceeds MIL-S-2319OE standard.

Min. Tensile Strength

(in.)

(mm)

(lb.)

(kg)

Package Qty.

Shpg. Wt. (lbs.)

2.5

100

0.1

100

0.2

Nylon Cable Ties Miniature CV100 CV200M

4 8

203

2.5

25⁄32

CV140

51⁄2

142

3.2

13⁄8

100

0.1

CV292

111⁄2

292

3.6

35⁄16

100

0.3

71⁄2

190

4.8

100

0.3

100

0.5

102

100

0.5

Intermediate

Standard CV190 CV280

280

4.8

35⁄32

CV368

141⁄2

368

4.8

CV200L

203

7.6

25⁄32

120

100

0.4

CV340

131⁄2

340

7.6

37⁄8

120

100

1.4

CV380

380

7.6

411⁄32

110

120

100

1.6

CV450

173⁄4

450

8.0

51⁄4

133

120

100

1.9

CV610

610

9.0

79⁄32

185

175

100

2.2

CV762

762

9.0

99⁄32

236

175

100

2.5

Heavy-Duty

Weather Resistant Nylon Cable Ties Miniature CV100W

100

2.5

100

0.1

CV140W

51⁄2

142

3.2

13⁄8

100

0.1

CV292W

111⁄2

292

3.6

35⁄16

100

0.3

71⁄2

190

4.8

100

0.3

100

0.5

Intermediate

Standard CV190W CV280W

280

4.8

35⁄32

CV368W

141⁄2

368

4.8

102

100

0.5

CV200LW

203

7.6

25⁄32

120

100

0.4

CV340W

131⁄2

340

7.6

37⁄8

120

100

1.4

CV380W

380

7.6

411⁄32

110

120

100

1.6

CV450W

173⁄4

450

8.0

51⁄4

133

175

100

1.9

CV610W

610

9.0

79⁄32

185

175

100

2.2

CV762W

762

9.0

99⁄32

236

175

100

2.1

Heavy-Duty

258

www.westwardtools.ca

W259-10.qxp

2/12/10

3:21 PM

Page 259

MATERIAL HANDLING & EQUIPMENT

Chain Pullers & Hoists. . . . . . 260-261 Trolleys . . . . . . . . . . . . . . . . . . . 262 Mini Chain Pullers. . . . . . . . . . . . 263 Wire Rope Pullers & Accessories . . . . . . . . . . . . . . . . . . . . . . . 263 Gear Pullers . . . . . . . . . . . . . . . . 266 Bottle Jacks . . . . . . . . . . . . . . . . 267 Floor & Service Jacks . . . . . . 268-278 Presses . . . . . . . . . . . . . . . . 279-280 Hand Trucks . . . . . . . . . . . . . 282-283 Pallet Jacks . . . . . . . . . . . . . 286-289 Service Carts . . . . . . . . . . . . 290-291 Tables . . . . . . . . . . . . . . . . . . . . 292 Parts Cleaners . . . . . . . . . . . . . . 294 Bench Grinders . . . . . . . . . . . . . . 295 Drill Presses & Band Saws. . . 296-298 Welding . . . . . . . . . . . . . . . . 302-303

2/9/10

9:09 AM

Page 260

CHAIN HOISTS

AIR CHAIN HOISTS • • • •

Pilot air pendant control. Custom lengths of chain and pendant control available. Heavy-duty chain bucket standard equipment. Low head room design.

Part No. FAH50LP FAH100LP

Load Lifting Air Chain Hose Shpg. Capacity Standard Chain Speed Consumption Size Size Wt. Falls (m/min) (CFM) (mm) (in.) (lbs.) (kg) Lift 500 1,000

3.0 m / 9.8 ft 3.0 m / 9.8 ft

7.0

51.0

3.5

66.3

6.3

3⁄8

51.0

6.3

1⁄2

62.0

V-LEVER CHAIN PULLER Custom chain lengths available. • Sturdy steel construction. • Easy maintenance. • Compact, lightweight design. • 360° handle rotation for easy use from any operating position. • Standard safety features including patented non-slip hook.

Part No.

260

Min. Dist. Load Capacity Chain Standard Between Width Depth (in.) Falls Lift (ft.) Hooks (in.) (in.) (tons)

Shpg. Wt. (lbs.)

VWR34

3⁄4

11.6

5.8

5.1

15.0

VWR34L10

3⁄4

11.6

5.8

5.1

15.0

VWR34L15

3⁄4

11.6

5.8

5.1

20.0

VWR34L20

3⁄4

11.6

5.8

5.1

25.0

VWR34L25

3⁄4

11.6

5.8

5.1

30.0

VWR15

11⁄2

12.7

6.5

5.8

21.0

VWR15L10

11⁄2

12.7

6.5

5.8

15.0

VWR15L15

11⁄2

12.7

6.5

5.8

20.0

VWR15L20

11⁄2

12.7

6.5

5.8

25.0

VWR15L25

11⁄2

12.7

6.5

5.8

30.0

VWR30

15.5

7.6

7.1

36.0

VWR30L15

15.5

7.6

7.1

15.0

VWR30L15

15.5

7.6

7.1

20.0

VWR30L20

15.5

7.6

7.1

25.0

VWR30L25

15.5

7.6

7.1

30.0

VWR60

21.6

7.6

9.6

60.0

VWR60L10

21.6

7.6

9.6

15.0

VWR60L15

21.6

7.6

9.6

20.0

VWR60L20

21.6

7.6

9.6

25.0

VWR60L25

21.6

7.6

9.6

30.0

www.westwardtools.ca

2/9/10

9:10 AM

Page 261

CHAIN HOISTS V-LEVER COMMON REPLACEMENT PARTS Description

VRL701A34

Top Hook with Safety Latch

3⁄4

VRL701A1-12

Top Hook with Safety Latch

11⁄2

VRL701A3

Top Hook with Safety Latch

3 Ton

2.2

VRL701A6

Top Hook with Safety Latch

6 Ton

5.1

Ton

1.1

Ton

1.4

VRL709AH34

Puller Size

Shpg. Wt. (lbs.)

Part No.

Bottom Hook with Safety Latch

3⁄4

VRL709AH

Bottom Hook with Safety Latch

11⁄2

VRL709A3

Bottom Hook with Safety Latch

VRL709A6 VRL740-34 VRL740-1-12

Ton

1.1

Ton

1.4

3 Ton

2.2

Bottom Hook with Safety Latch

6 Ton

5.1

Safety Latch Kit

3⁄4

Ton

0.1

Safety Latch Kit

11⁄2 Ton

0.1

VRL740-3

Safety Latch Kit

3 Ton

0.1

VRL740-6

Safety Latch Kit

6 Ton

0.1

VRL810-34

Load Chain

3⁄4

Ton

1.0

VRL810-1-12

Load Chain

11⁄2

Ton

1.5

VRL810-3-6

Load Chain

3 Ton

2.0

VITAL CHAIN HOISTS • • • • •

Sturdy steel construction for the professional. Easy maintenance. Compact lightweight design. Minimal manual labour to get heavy jobs done through exceptional gearing. Standard safety features including patented non-slip hook.

Part No.

Capacity Standard (tons) Lift (ft.)

Headroom (in.)

Load Falls

Shpg. Wt. (lbs.)

VCH12

1⁄2

57.0

VCH12L15

1⁄2

60.0

VCH12L20

1⁄2

65.0

VCH12L25

1⁄2

70.0

VCH1

151⁄4

39.0

VCH1L15

151⁄4

70.0

VCH1L20

151⁄4

75.0

VCH1L25

151⁄4

80.0

VCH2

64.0

VCH2L15

85.0

VCH2L20

90.0

VCH2L25

95.0

VCH3

221⁄2

96.0

VCH3L15

221⁄2

100.0

VCH3L20

221⁄2

110.0

115.0

130.0

VCH3L25

221⁄2

VCH5

VCH5L15

140.0

VCH5L20

150.0

VCH5L25

160.0

www.westwardtools.ca

261

2/9/10

9:11 AM

Page 262

CHAIN HOISTS COMMON CHAIN HOIST PARTS Part No.

Z709A1

Z740A1

Description

Hoist Size

Shpg. Wt. (lbs.)

Z820L12

Load Chain

1⁄2

Ton

1.0

VRL810-34

Load Chain

1 Ton

1.0

Z820L2

Load Chain

2 Ton

1.5

VRL810-1-12

Load Chain

3 Ton

1.5

VRL810-3-6

Load Chain

5 Ton

2.0

N800S

Hand Chain

1, 3 Ton

0.6

N800L

Hand Chain

Z701TA12

Top Hook With Safety Latch

1⁄2

Ton

1.1

Z701TA1

Top Hook With Safety Latch

1 Ton

1.4

Z701TA2

Top Hook With Safety Latch

2 Ton

2.0

Z701TA3

Top Hook With Safety Latch

3 Ton

3.0

Z701TA5

Top Hook With Safety Latch

5 Ton

5.2

Z709A12

Bottom Hook With Safety Latch

1⁄2

Ton

1.1

Z709A1

Bottom Hook With Safety Latch

1 Ton

1.4

Z709A2

Bottom Hook With Safety Latch

2 Ton

2.0

Z709A3

Bottom Hook With Safety Latch

3 Ton

3.0

Z709A5

Bottom Hook With Safety Latch

5 Ton

5.2

Z740A12

Safety Latch Kit

1⁄2

Ton

0.1

Z740A1

Safety Latch Kit

1 Ton

0.1

Z740A2

Safety Latch Kit

2 Ton

0.1

Z740A3

Safety Latch Kit

3 Ton

0.1

Z740A5

Safety Latch Kit

5 Ton

0.1

1⁄2,

2, 3 Ton

1.0

TROLLEYS All trolleys are fully adjustable to fit the I-beams indicated in the chart, and come equipped with quality ball bearings for smooth running. “DS” indicates drop stops.

262

Part No. Capacity (tons)

Type

I-Beam Flange (in.)

Min. Revolving Radius (mm)

Wheel Dia. Shpg. Wt. (in.) (lbs.)

VPT12DS

1⁄2

Plain

3-5

900

23⁄16

15.0

VPT1DS

Plain

3-5

1,300

31⁄8

25.0

VPT2DS

Plain

4-6

1,500

35⁄16

41.0 55.0

VGT2DS

Geared

4-6

1,500

35⁄16

VPT3DS

Plain

4-6

2,000

43⁄4

72.0

VGT3DS

Geared

4-6

2,000

43⁄4

89.0 120.0 130.0

VPT5DS

Plain

5-6

2,600

51⁄2

VGT5DS

Geared

5-6

2,600

51⁄2

www.westwardtools.ca

2/9/10

9:12 AM

Page 263

PULLERS MINI-CHAIN PULLERS • • • • •

Automatic switching to free pulley mode. Completely sealed brake unit. Fits in the palm of your hand. Plated chain to prevent rust. Ideal for transportation and installation work.

Part No.

Standard Lift (m)

Rated Load WLL (kg)

Minimum Headroom (mm)

Shpg. Wt. (lbs.)

VWR14

1.0

250

230

4.5

VWR12

1.5

500

260

7.7

SUPER-TIL WIRE ROPE PULLER To order: Specify Body item number and appropriate Cable item number. Custom lengths of cable available. Cable sold separately.

Part No. S7B S13B S35B

Lift Capacity Pull Capacity (tons) (tons)

Cable Size

3⁄4

11⁄4

/ 8.3 mm Body Only

20.0

11⁄2

21⁄2

7⁄16"

/ 11.3 mm Body Only

47.0

5⁄8"

/ 16.3 mm Body Only

71.0

5⁄16"

Shpg. Description Wt. (lbs.)

WIRE ROPE PULLER CABLES Part No.

Cable Size

Cable Length

Shpg. Wt. (lbs.)

33' (10 m)

6.0

in. / 8.3 mm

66' (20 m)

11.5

in. / 8.3 mm

100' (30 m)

16.5

S13-33

7⁄16

in. / 11.3 mm

33' (10 m)

12.0

S13-66

7⁄16

in. / 11.3 mm

66' (20 m)

23.5

S13-100

7⁄16

in. / 11.3 mm

100' (30 m)

35.0

S35-66

5⁄8

in. / 16.3 mm

66' (20 m)

52.5

S35-100

5⁄8

in. / 16.3 mm

100' (30 m)

77.5

S7-33

5⁄16

in. / 8.3 mm

S7-66

5⁄16

S7-100

5⁄16

CABLE PULLER Up to 8,000 lb. pulling capacity. High leverage ratio for easy operation. Automatic let down safety catch. Twin gear mechanism for greater safety. For industrial and professional applications. Three hook design for 4,000 lb. pulling at extended length.

Part No.

Pull Capacity (tons)

HPC4

Pull At Extended Length Shpg. (lbs.) Wt. (lbs.) 4,000

15.0

CABLE PULLER • • • • • •

Up to 4,000 lbs. pulling capacity. Cable length 14'9". High leverage ratio for easy operation. Automatic let-down safety catch. Built tough for industrial applications. Used horizontally to free stuck vehicles, pull stumps or tighten fences.

Part No. P2HP

Capacity (tons)

Shpg. Wt. (lbs.)

15.0

www.westwardtools.ca

263

2/9/10

9:13 AM

Page 264

TIE DOWNS RATCHETING TIE-DOWN • With S-hooks. • 1" x 16 ft. (5 m).

Part No.

Working Load Limit (lbs.)

Maximum Capacity (lbs.)

Shpg. Wt. (lbs.)

TDR1S5

425

1,300

1.6

MEDIUM-DUTY RATCHETING TIE-DOWN • With J-hooks. • 1" x 16 ft. (5 m).

Part No.

Working Load Limit (lbs.)

Maximum Capacity (lbs.)

Shpg. Wt. (lbs.)

TDR1J5

525

1,550

1.8

Working Load Limit (lbs.)

Maximum Capacity (lbs.)

Shpg. Wt. (lbs.)

350

1,000

1.4

CAM BUCKLE TIE-DOWN • With S-hooks. • 1" x 6 ft. (2 m). • 2 per package.

Part No. TDC1S2PR

HEAVY-DUTY RATCHETING TIE-DOWN • With J-hooks. • 2" x 29 ft. (9 m).

Part No.

Working Load Limit (lbs.)

Maximum Capacity (lbs.)

Shpg. Wt. (lbs.)

TDR2J9

1,500

4,400

6.3

HEAVY-DUTY RATCHETING TIE-DOWN • With flat hooks. • 2" x 29 ft. (9 m).

264

Part No.

Working Load Limit (lbs.)

Maximum Capacity (lbs.)

Shpg. Wt. (lbs.)

TDR2F9

3,500

11,000

7.3

www.westwardtools.ca

2/9/10

9:14 AM

Page 265

LOAD BINDERS

2" TIE DOWN RATCHETS • TDR2J5H – 2 x 15 ft. • TDR2J8H – 2 x 25 ft.

Part No.

Working Maximum Shpg. Load Limit Capacity Length Wt. (lbs.) (ft.) (lbs.) (lbs.)

Description

TDR2J5H Heavy-Duty Tie Down Strap

1,650

5,000

6.3

TDR2J8H Heavy-Duty Tie Down Strap

1,650

5,000

7.3

LEVER TYPE LOAD BINDERS • Drop forged and heat treated. • 360° swivel hooks.

Part No.

Chain Size (in.)

LB14-516

1⁄4

LB516-38

5⁄16

Working Load Limit (lbs.)

Proof Load (lbs.)

Shpg. Wt. (lbs.)

2,600

5,200

3.6

5,400

10,800

8.4

- 5⁄16 -

3⁄8

RATCHET TYPE LOAD BINDERS • Drop forged and heat treated. • Ratchet style requires less effort to attach and remove from loads.

Part No.

Chain Size (in.)

Working Load Limit (lbs.)

Proof Take Shpg. Wt. Load (lbs.) Up (in.) (lbs.)

LB14-516R

1⁄4

2,600

5,200

3.6

LB516-38R

5⁄16

- 3⁄8

5,400

10,800

10.5

LB38-12R

3⁄8

- 1⁄2

9,200

18,400

12.9

- 5⁄16

CLEVIS GRAB HOOKS • Forged carbon steel or forged alloy steel. • Not recommended for overhead lifting.

Part No.

Chain Size (in.)

Grade

Working Load Limit (lbs.)

Shpg. Wt. (lbs.)

Forged Carbon Steel HCG14

1⁄4

G30

2,600

0.4

HCG516

5⁄16

G30

3,900

0.4

HCG38

3⁄8

G30

5,400

0.4

HCG12

1⁄2

G30

9,200

0.4

Forged Alloy Steel HCG14A

1⁄4

G70

2,600

0.4

HCG516A

5⁄16

G70

3,900

0.4

HCG38A

3⁄8

G70

5,400

0.4

HCG12A

1⁄2

G70

9,200

0.4

www.westwardtools.ca

265

2/9/10

9:15 AM

Page 266

GEAR PULLERS HYDRAULIC RAM KITS Easy lock design for fast and simple assembly/disassembly. Safety overload by-pass system protects unit and user from damage or injury. Ram plunger is chrome plated for long life and smooth, rust free performance. Flexible hydraulic hose with spring guards at both ends. Comes in rugged high impact case (HRK10 equipped with wheels).

Capacity

Minimum Extension Maximum Extension Shpg. Wt.

Part No.

(kg)

(lbs.)

(mm)

(in.)

(mm)

(in.)

(lbs.)

HRK4

4,000

8,800

274

397

40.0

HRK10

10,000 22,000

348

501

65.0

10 TON MASTER HYDRAULIC PULLER Labour saving 10 ton master hydraulic set includes: 10 ton hydraulic ram; 4", 6" and 8" puller arms; collar, double body, end cap, 2" and 4" ram extensions, triple body, beam, bearing separator, main rod, and main rod extension. Individual components available separately.

Part No. GPHK1

Capacity (tons) Description 10

Shpg. Wt. (lbs.)

Master Hydraulic Puller Set

35.2

HEAVY-DUTY GEAR PULLERS Fully hardened drop-forged jaws provide long lasting strength and durability. Chrome vanadium finish protects jaws and extends life. Double end, reversible jaws suit a wide range of pulling applications. Replacement parts available.

Max. Max. Spread Shpg. Wt. Part No. Jaw Style Reach (in.) (in.) (lbs.) 2 Jaw GP75

Reversible

21⁄2

0.8

GP100

Reversible

31⁄4

0.9

GP150

Reversible

1.8

GP200

Reversible

4.5

GPT100

Reversible

31⁄4

1.0

GPT150

Reversible

2.5

GPT200

Reversible

5.0

3 Jaw

COMBINATION 2/3 JAW GEAR PULLERS Fully hardened drop-forged jaws provide long lasting strength and durability. Chrome vanadium finish protects jaws and extends life. Double end, reversible jaws suit a wide range of pulling applications. Replacement parts available.

Max. Max. Spread Shpg. Wt. Part No. Jaw Style Reach (in.) (in.) (lbs.) GPC100

266

Reversible

31⁄4

1.1

www.westwardtools.ca

2/9/10

9:16 AM

Page 267

BOTTLE JACKS HYDRAULIC BOTTLE JACKS • • • • •

Heavy-duty construction with die-cast base. Reinforced critical stress points. Cylinders machined with die formed threads for leak-free performance. Polished ram and cylinder protects seals from abrasion damage. Patented safety bypass system to protect hydraulic unit from internal damage caused by ram over travel. • Adjustable extension screw is heat treated and has cleated saddle to prevent slippage. • Repair kits available. • Meets ANSI-PALD standards for overload protection.

Capacity Part No. (tons)

Low Height (in.)

Ram Travel (in.)

Screw Travel (in.)

Maximum Height (in.)

Shpg. Wt. (lbs.)

71⁄10

41⁄2

133⁄5

5.7

23⁄8

153⁄8

8.1

83⁄5

51⁄10

163⁄5

9.7

87⁄8

23⁄4

175⁄8

12.3

J12

97⁄16

33⁄16

185⁄8

17.8

J20

97⁄16

33⁄16

185⁄8

27.1

J30

53.5

31⁄10

13⁄5

103⁄5

14.3

61⁄2

31⁄10

13⁄5

111⁄5

21.8

Low Profile JL12 JL20

TELESCOPING HYDRAULIC BOTTLE JACKS • • • • • • •

Heavy steel construction with die-cast base and reinforced stress points. Cylinders are machined with die-formed heads for leak-free performance. Polished ram and cylinder protects seals from abrasion damage during continuous use. Serrated heat-treated saddle provides generous lifting area and secure grip. Heat-treated extension screw allows low pickup adjustment and maximum lift height. 2-piece handle allows for maximum pumping force. 2-stage lifting ram built-in hydraulic circuitry in an easy-to-replace cartridge with preset overload relief valve.

Capacity Part No. (tons)

Minimum Height Screw Retracted (in.)

Maximum Height Screw Extended (in.)

Shpg. Wt. (lbs.)

J4T

13.0

J10T

71⁄4

171⁄4

26.2

J15T

41.0

AIR/MANUAL HYDRAULIC BOTTLE JACKS Designed for either pneumatic or manual operation. Swivel air hose design provides connection to air source from any direction. Heavy steel construction with die-cast base and reinforced stress points. • Cylinders are machined with die-formed heads for leak-free performance. • Polished ram and cylinder protects seals from abrasion damage during continuous use. • Serrated heat-treated saddle provides generous lifting area and secure grip. • Heat-treated extension screw allows low pickup adjustment and maximum lift height. • 3-piece long handle for maximum pumping force.

Part No.

Minimum Height Maximum Height Shpg. Capacity (tons) Screw Retracted (in.) Screw Extended (in.) Wt. (lbs.)

JA12

91⁄2

185⁄8

26.0

JA20060

91⁄2

185⁄8

35.0

JA30

62.7

JA50

139.0

www.westwardtools.ca

267

2/9/10

9:17 AM

Page 268

SERVICE JACKS

Dual Side Handles for Portability

Removable Rubber Matting

1.5 TON ALUMINUM JACK • Professional grade. • Lift capacity: 1.5 tons/3,000 lbs. • Lightweight and equipped with side handles for increased portability. • Low profile. • U-joint linkage eliminates binding. • Dual pump design for maximum height. • 2-piece oversized handle.

Dual Pump Design for a Fast Lift

Shpg. Wt. (lbs.)

Part No.

Description

JA15

1.5 Ton Aluminum Jack

42.0

2 TON ALUMINUM RACING JACK • • • •

Stronger, yet lighter than steel units. Quick lift mechanism for quick lifting. Low profile design for easy access under low vehicles. Industrial grade casters and side handle for easy carrying.

Maximum

Overall Reach (in.)

Handle Length (in.)

Shpg. Wt. (lbs.)

181⁄2

18.5

46.2

Lifting Height (in.)

Part No.

Capacity (tons)

Minimum

G26020

33⁄4

2 TON ALUMINUM & STEEL RACING JACK • • • •

50% aluminum, 50% steel. Quick lift mechanism for quick lifting. Low profile design for easy access under low vehicles. Industrial grade casters and side handle for easy carrying.

Part No. G26023

Overall Handle Shpg. Reach Length Wt. (in.) (in.) (lbs.)

Lifting Height (in.)

Capacity (tons)

Minimum

Maximum

33⁄4

181⁄2

18.5

60.3

Handle Length (in.)

Shpg. Wt. (lbs.)

113.5

2 TON LOW PROFILE SHORT CHASSIS JACK Designed especially for vehicles with low accessibility. Low profile saddle allows for maximum access under the vehicle. Equipped with universal joint release valve and PU saddle pad.

268

Part No.

Capacity (tons)

G29023

Overall Reach Minimum Maximum (in.) Lifting Height (in.) 21⁄2

www.westwardtools.ca

2/9/10

9:19 AM

Page 269

SERVICE JACKS 21⁄2 TON MAGIC LIFT LOW PROFILE SERVICE JACK This jack features an extremely low profile of 21⁄2" to accommodate vehicles with air dams or low clearance heights. Magic lift feature offers a quicker lift for added performance. Universal joint release valve for ease of lowering. Air vent valve is incorporated into the lift to eliminate air in the hydraulic system optimizing jack performance.

Part No. G29025

Lifting Capacity Height (in.) Minimum (tons) 21⁄2

21⁄2

Lifting Height (in.) Maximum

Overall Reach (in.)

1911⁄16

Handle Shpg. Wt. Length (lbs.) (in.) 52

87.0

3 TON MAGIC LIFT SUV SERVICE JACK Designed especially for vehicles with high off-ground axle heights. One or two strokes raises saddle quickly into lifting position. Equipped with industrial grade wheels and swivel casters on internal bearings. Features patented built–in bypass device and rugged universal joint release valve, metered release for precise load control and heavy gauge steel construction.

Maximum Minimum Lifting Lifting Capacity Part No. (tons) Height (in.) Height (in.) G25037

Overall Reach (in.) 22

Handle Shpg. Length Wt. (lbs.) (in.) 52

134.2

31⁄2 TON MAGIC LIFT SERVICE JACK • • • • •

Convenient 2 piece handle for easy storage. Speedy lift for great performance. Square rubber saddle pad for stability. Needle safety valve for optimum safety. Magnetic side trays for parts and tool storage.

Part No.

Capacity (tons)

G29037

31⁄2

Maximum Overall Handle Minimum Reach Length Lifting Lifting (in.) Height (in.) Height (in.) (in.) 51⁄2

Shpg. Wt. (lbs.)

99.2

3 TON SERVICE JACK & AXLE STAND KIT Hydraulic Floor Jack • Heavy-duty steel frame, wheels and castors. • Built-in safety overload system prevents jack from being used beyond rated capacity. • Long two-piece handle. • 360° swivel saddle. • Min height: 145 mm (511⁄16"). • Max height: 520 mm (201⁄2"). Jack Stands • Welded steel constructed heavy-gauge frame with 4 feet. • Weight on locking pin serves as a locking mechanism to prevent accidental release under load. • Min height: 285 mm (115⁄8"). • Max height: 425 mm (163⁄4").

Part No.

Description

JSK3

Service Jack Kit

www.westwardtools.ca

Shpg. Wt. (lbs.) 107.0

269

2/9/10

9:19 AM

Page 270

SERVICE JACKS

21⁄2 & 3 TON PROFESSIONAL SERIES SERVICE JACKS Designed to meet the requirements of the professional user these heavy-duty service jacks feature heavy gauge construction for durability in every day use. These units deliver high speed lifting to load, and metered release system allows for precise load control. A built in bypass system protects the hydraulic system from overload.

Minimum Maximum Overall Reach Lifting Lifting Capacity (in.) Part No. (tons) Height (in.) Height (in.)

Handle Length (in.)

Shpg. Wt. (lbs.)

G6102S

21⁄2

33⁄4

293⁄4

497⁄8

95.0

G59305

53⁄4

421⁄8

91.0

HEAVY-DUTY HYDRAULIC SERVICE JACKS Long chassis for reaching oversized loads; safety bypass system protects ram from overextension damage; high carbon steel chassis allows for streamlined lightweight design while providing maximum strength; foot pedal enables saddle to rise quickly to load. Note: Repair kits available. G493 is a short chassis model.

Capacity

Minimum Height

Maximum Height

Shpg. Wt. (lbs.)

G1300

2,000 kg/4,400 lbs.

127 mm/5"

534 mm/21"

75.7

G5200S

2,000 kg/4,400 lbs.

100 mm/4"

813 mm/32"

151.8

Part No.

G30Q0S

3,000 kg/6,000 lbs.

100 mm/4"

508 mm/20"

130.0

G2501S

4,536 kg/10,000 lbs.

178 mm/7"

686 mm/27"

216.0

G1001S

10,000 kg/22,000 lbs.

178 mm/7"

686 mm/27"

356.8

483 mm/19"

80.7

G49309

2,730 kg/5,000 lbs.

140

mm/51⁄4"

AIR/MANUAL HYDRAULIC SERVICE JACKS Adapted with an air motor to be both manual and air actuated. Wide stance/low centre of gravity provides optimum stability under load stress. Heavy gauge chassis helps prevent distortion or twisting. Foot pedal operation provides quick lift to load point. Automatic by-pass mechanism protects user and hydraulic cylinder from over pumping. Internal load limiting device helps prevent jack and owner from injury in case of overload. • Handle actuated release valve provides metered control. • Locking release lever locks handle at 90° for storage, 45° for easy carrying movement and 0° to gain access to lift point. • Self returning spring. • Built-in silencer to reduce noise. • Swivel caster for easy steering. • Repair kits available.

270

Part No.

Capacity (tons)

Minimum Height (in.)

Maximum Operating Height (in.) PSI

Shpg. Wt. (lbs.)

G4232S

3.6

116 (min.)

160.0

G2500S

4.5

116 (min.)

220.0

G1000S

116 (min.)

359.0

www.westwardtools.ca

2/9/10

9:21 AM

Page 271

SERVICE JACKS

20-TON AIR ACTUATED LONG CHASSIS SERVICE JACK Features of this jack include a handle actuated release valve which provides metered control at any desired lowering speed and a high speed Air Turbo Motor, which helps raise the load to the desired height efficiently, effortlessly, and safely.

Part No. G22201

Maximum

Overall Reach (in.)

Handle Length (in.)

Shpg. Wt. (lbs.)

621⁄4

550.0

Lifting Height (in.)

Capacity (tons)

Minimum

71⁄2

AIR OPERATED TRUCK/BUS JACKS Compact low profile design for maximum access. Fits easily between wheels of tandem axle. Handle-top metered control release valve for easy height adjustment. User friendly self-returning spring. Automatic by-pass mechanism protects user and hydraulic cylinder from overpumping. Internal load limiting device helps prevent jack and user injury in case of overload. Handle locking lever secures handle in 90°, 45° or 0° positions. Uses three adapters (20 mm, 70 mm and 120 mm included). JBA2035 equipped with 2-stage lifting ram.

Lifting Height (in.)

Part No.

Capacity (tons)

Minimum

Maximum

Operating PSI

Shpg. Wt. (lbs.)

A0701S

90 - 175

80.0

JBA2035

116 (min.)

94.0

10-TON AIR/HYDRAULIC TRUCK END LIFT This heavy-duty air lift is capable of lifting 10 tons at 200 PSI, and is designed to lift the entire front end of the vehicle. Features include automatic engaging locks, 21⁄2" pneumatic rear tires and casters for easy positioning and transport. Ideal unit for truck, farm and heavy-duty repair shop applications.

Capacity Part No. (tons)

Dimensions Maximum Minimum Saddle Shpg. Pad Height Pad Height Spread Wt. (in.) (in.) (lbs.) LxWxH (in.) (in.)

G93690

40 x 36 x 651⁄2

www.westwardtools.ca

501⁄2

121⁄2

25 - 53

670.0

271

2/9/10

9:21 AM

Page 272

SERVICE JACKS CLUTCH JACK • Allows for easy installation and removal of clutches on vehicles and equipment. • 2" and 13⁄4" diameter spline axle. • Heavy-duty one piece handle.

Jack Length Maximum (in.)

Lifting Height (in.)

Part No.

Capacity (lbs.)

Minimum

G40500

500

161⁄2

421⁄8

Handle Length (in.)

Shpg. Wt. (lbs.)

221⁄2

99.2

441⁄2

4 TON FORKLIFT JACK Low pickup point allows for hard to reach places under low-profile trucks. Maximum lift of 30" provides room needed to perform a variety of repairs. Removable handle and compact size allow easy transport. Four wheel design makes it simple to maneuver.

Capacity Part No.

Lifting Height (in.)

Shpg. Wt.

(tons)

Minimum

Maximum

(lbs.)

84.7

G4600

7 TON FORK LIFT STANDS Rigid, heavy gauge steel frame meets or exceeds ANSI standards and helps prevent distortion and twisting. Holding pins adjust stand heights at 21⁄4" intervals. Lightweight for portability and ease of positioning.

Capacity Part No. (tons) JSP7F

Minimum

Maximum

Base Size (in.)

91⁄2

141⁄4

83⁄4 x 83⁄4

Lifting Height (in.)

Shpg. Wt. Type of Adjustment (lbs.) Pin

22.9

HEAVY-DUTY LOW PROFILE TRANSMISSION JACKS • Adjustable universal saddle with load restraining chain fits around most transmission pan flanges. • 360° rotating handle to allow operation in any position. • Automatic by-pass mechanism protects user and hydraulic cylinder from over pumping. • Internal load limiting device for added safety.

Capacity

272

Lift Range (in.)

Shpg. Wt.

Part No.

(tons)

Low

High

(lbs.)

45000S

1⁄2

95.0

42000S

178.0

www.westwardtools.ca

2/9/10

9:22 AM

Page 273

TRANSMISSION JACKS 1⁄2

TON TELESCOPIC TRANSMISSION JACK

• Featuring load restraining chains. • Multi-adjustment knobs ensure transmission cradle is always at the correct angle to position and accept any load. • Automatic bypass mechanism protects user and hydraulic cylinder from over-pumping. • Internal load limiting device helps prevent user and jack injury in case of overload. • Foot operated pump and release frees user's hands to guide load. • Four heavy-duty swivel caster wheels provide easy moving and positioning. • Rugged all welded construction.

Capacity Part No. JT1000

1⁄2

• • • • •

Lifting Height (in.)

Shpg. Wt.

(tons)

Minimum

Maximum

(lbs.)

1⁄2

37.7

150.0

TON AIR/MANUAL TRANSMISSION JACK Extra wide cradle assembly. Automatic bypass mechanism protects user and hydraulic cylinder from over-pumping. Foot operated pump and release frees user's hands to guide load. Four heavy-duty swivel caster wheels provide easy moving and positioning. Internal load limiting device for added safety.

Capacity

Lifting Height (in.)

Shpg. Wt.

Part No.

(tons)

Minimum

Maximum

(lbs.)

JTA1000

1⁄2

37.7

160.0

SINGLE STAGE TRANSMISSION JACKS Reliable under hoist transmission removal and installation. Extra wide base lowers centre of gravity, promoting stability. Features rugged steel wheels and full-swivel ball bearing casters. 14 degree tilting, front and rear for macro and micro adjustments.

Lifting Height (in.)

Base Size Shpg. Wt. (in.) (lbs.)

Part No.

Capacity

Minimum

Maximum

G40700

700 lbs.

571⁄4

763⁄8

361⁄8 x 325⁄8

137.3

1 Ton

485⁄8

773⁄8

151⁄2

306.0

G42003

125⁄8

11⁄2 TON LOW LIFT TRANSMISSION JACK The adjustable head on this transmission jack can be tilted forward, backward and side to side for optimum alignment of transmission bolt patterns and pins. A 360° rotating pumping socket enables the user to operate with ease in tight locations.

Lifting Height (in.)

Part No.

Capacity (tons)

Minimum

Maximum

Saddle Base (in.)

Shpg. Wt. (lbs.)

G43000

11⁄2

77⁄8

371⁄4

151⁄2 x 131⁄4

294.3

www.westwardtools.ca

273

2/9/10

9:23 AM

Page 274

JACK STANDS HEAVY-DUTY PIN TYPE JACK STANDS • • • •

Welded steel construction designed for strength and safety. Heavy gauge frame prevents twisting. 3 legs with reinforced foot pads. Cable prevents losing pin when removed.

Capacity (tons)

Min. Height (in.)

Max. Height (in.)

JSP3

113⁄8

171⁄32

81⁄4

12.2

JSP6

143⁄4

221⁄2

111⁄4

26.9

JSP12

191⁄8

291⁄2

123⁄8

55.8

215⁄8

357⁄16

1711⁄16

88.2

Part No.

JSP20

Base Shpg. Wt. Width (in.) (lbs.)

3 & 6 TON RATCHET TYPE VEHICLE STANDS Multi-position, heat-treated ductile ratchet bar sustains heavy loads over extended periods of time, adjusts quickly and easily to desired height. Weight on the ratchet pin serves as a locking mechanism to prevent accidental release under load. Rustfree, baked enamel gray finish assures long term durability. Manufactured to meet the safety guidelines of American National Standard Institute. ANSI/ASME PALD Standards. * Sold in pairs.

Part No. JS3 JS6

Capacity Lifting Height (in.) Base Package Shpg. (tons) Min. Max. Size (in.) Qty. Wt. (lbs.) 3

153⁄4

81⁄2 x 71⁄2

19.0

111⁄4

32.0

x 10

10 TON JACK STANDS • Sturdy, welded steel construction for safety and strength. • Heavy gauge, steel frame helps prevent distortion or twisting. • Mid lift and high lift versions.

Base Size (in.)

Shpg. Wt. (lbs.)

Part No.

Capacity Lifting Height (in.) Description (tons) Minimum Maximum

JSP10M

Mid Lift

9.5

185⁄8

301⁄2

16 x 16

88.0

JSP10H

High Lift

16 x 16

118.0

3⁄4

TON AUXILIARY STAND WITH FOOT PEDAL

Wide 12" diameter base stays in position under heavy loads. Foot pedal locks stand for convenient storage or shipment. 51⁄4" x 15⁄8" saddle.

Part No. JSH075

274

Lifting Height (in.)

Capacity (tons)

Minimum

Maximum

Base Size (in.)

Shpg. Wt. (lbs.)

3⁄4

533⁄8

12" Diameter

37.2

www.westwardtools.ca

2/9/10

9:24 AM

Page 275

SERVICE EQUIPMENT

2 TON TRIPOD UNDER HOIST STAND Wide 24" x 24" x 24" triangular base stays in position under heavy loads. Heavy welded construction with steel leg reinforcement. 51⁄4" x 15⁄8" saddle.

Part No. JSH2

Lifting Height (in.)

Capacity (tons)

Minimum

Maximum

Base Size (in.)

Shpg. Wt. (lbs.)

24 x 24 x 24

45.0

2 TON FOLDING ENGINE CRANE • • • • •

Heavy-duty construction. Folds for convenient storage. Adjustable boom length. Swivel casters for easy movement. Variable capacity settings.

Part No. ECF2 ECF1

Capacity (lbs.)

Hook Height (in.)

4,000 2,000

Boom Reach (in.)

Shpg. Wt. (lbs.)

Min.

Max.

801⁄4

533⁄4

805⁄8

300.0

801⁄4

471⁄4

583⁄4

279.0

Retracted Extended

600 LB. ENGINE SUPPORT • One chain included: white zinc–plated. • One piece of adjustable T–handle.

Part No.

Description

ESS600

Engine Support

Capacity (lbs.)

Shpg. Wt. (lbs.)

600

22.0

ENGINE BALANCERS • Use for easy installations of most engines in various vehicles. • Two different models varying in length allowing for easy accessibility in tight spaces.

Part No.

Capacity (lbs.)

Length (in.)

Shpg. Wt. (lbs.)

ESB1250

1,250

12.2

ESB1500

1,500

13.3

www.westwardtools.ca

275

2/9/10

9:26 AM

Page 276

SERVICE EQUIPMENT HYDRAULIC CRANE RAMS These jacks comply with all applicable safety standards, including safety valve and travel limit requirements. Used in engine cranes for lifting automotive, marine and industrial engines. Item no. G44981 Air or manual operation.

Minimum Lifting Capacity Height (in.) Part No. (tons)

Maximum Lifting Height (in.)

Mounting Hole Size (in.)

Shpg. Wt. (lbs.)

Manual Hydraulic Rams G44940

193⁄8

343⁄4

5⁄16

18.5

G44980

235⁄8

423⁄4

3⁄8

31.1

423⁄4

3⁄8

39.0

Air/Manual Hydraulic Rams G44981

335⁄8

AUTOMOTIVE ENGINE STANDS • • • • •

Heavy-duty steel construction. Swivel casters for easy movement. Oil resistant non-slip hand grip. Designed for sturdy safe operation. Four wheel base with 2 swivel front casters.

Part No.

Capacity (lbs.)

Length (in.)

Width (in.)

Height (in.)

Shpg. Wt. (lbs.)

750

311⁄2

363⁄4

50.0

423⁄4

92.0

ES750 ES1250

1,250

3 TON ENGINE STAND • • • •

Full 360 degree rotating mounting head. Long handle and 95 to 1 worm gear drive provides easy engine rotation. Handy floor lock keeps stand from moving when repairs are underway. Universal adaptor included, optional adapters are available for various Diesel Engines and transmissions: Cummins Detroit, Mack International, Caterpillar and Allison transmissions.

Dimensions Capacity Length Width Height Part No. (tons) (in.) (in.) (in.) G93776

541⁄4

Rotational Clearance Shpg. Wt. From Head to (lbs.) Ground (in.) 351⁄4 to 431⁄4

631.0

ADAPTERS FOR 3-TON ENGINE STAND Part No. Description HW93776-1 For Cummins Engines: All NH, NTC, & NTE 855 Series In-Line 6 Cylinder, 378

Shpg. Wt. (lbs.) 50.0

Series V6, 504, 555 & 903 Series V8, KT 1150 Series In-Line 6 Cylinder L10

HW93776-2 For Detroit Engines: 53 Series In-Line 6 Cylinder, 6V & 8V also 71 Series In-

50.0

Line 6 Cylinder, 6V, 8V & 12V also 92 Series 6V & 8V also 8.2 L V8

HW93776-3 For Mack Engines: 672, 673, 675 & 711. Series In-Line 6 Cylinder

50.0

HW93776-4 For International Harvester Engines: DT-466 In-Line 6 Cylinder DV-550, MV-

50.0

404, MV-446, V304, V435, V392, 4-152, 4-194, 4-196, 9.0 L V8, 6.9 L (Ford)

HW93776-5 For Caterpillar Engines: 1673, 1674, 1693, 3306 & 3406 In-Line 6 Cylinder

50.0

also 1100 & 3208 V8 and 3408 V8

HW93776-6 All Allison Transmissions: AT 500, MT 600, MT 6 Speed, VH, VS and V730

276

50.0

www.westwardtools.ca

2/9/10

9:27 AM

Page 277

SERVICE EQUIPMENT HYDRAULIC WHEEL DOLLY The hydraulic actuated system allows for a one man operation. Rear swivel casters provide positive maneuverability and positioning. • Hydraulic lifting power makes operation easy. • Wide frame and lifting carriage enhance stability. • Arm rollers with bearings allow easy tire rotation and lug alignment.

Part No. DW1000

Capacity Lift Arms x Tilt Range Shpg. (lbs.) Width (in.) (Degrees) Overall Size (in.) Wt. (lbs.) 1,500

271⁄2 x 26

-2.5 to 5.5

427⁄8 x 381⁄2 x 345⁄8

198.0

STRUT SPRING COMPRESSOR WITH 4-TON PUMP • The Westward heavy-duty strut spring compressor is designed for safely disassembling and assembling strut spring assemblies. • Spring clasp rotates to fits most models and sizes. • Sliding ram bracket allows for height adjustment.

Min. Max. Operating Base Strut Spring Hydraulic Shpg. Height Height Force Size (in.) Diameter Stroke Wt. (in.) (lbs.) LxWxH (in.) (in.) (lbs.) Part No. (in.) 41⁄4 141⁄4 119 121⁄4 x 117⁄8 4 - 10 10 (141⁄4 max. - 102.0 CSS4 41⁄2 min.)

x 525⁄8

BRAKE DRUM HANDLER Designed for easy removal and installation of 15" and 161⁄2" brake drums. Detachable handle for easy storage, and 8" wheels for easy move ability over shop floors, yards, etc. Heavy-duty steel construction.

Part No.

Description

G46000

Heavy-Duty Brake Drum Dolly

Lift Range Low (in.)

Lift Range High (in.)

Shpg. Wt. (lbs.)

101⁄4

151⁄4

57.0

ALL PURPOSE MANUAL JACK • Versatile multi-purpose jack can be used for lifting, pushing, pulling, hoisting – up to 3.5 tonnes (7,700 lbs.). • Hot roll-formed alloy steel beam for superior strength. • Includes top clevis and numerous attachment holes. • 9.65" (L) x 5.51" (W).

Part No.

Steel Beam Height (in.)

Minimum Height (in.)

Maximum Height (in.)

Shpg. Wt. (lbs.)

AJ33

6.02

27.56

30.8

AJ48

6.06

42.13

30.9

AJ60

6.1

53.15

34.1

www.westwardtools.ca

277

2/9/10

9:28 AM

Page 278

SERVICE EQUIPMENT 2 TON VEHICLE RAMPS Durable, all metal construction. Incorporates three vertical weight reinforcing uprights. All welded construction adds additional safety factor. Sold in pairs only.

Part No.

Description

TR2C

Capacity per Pair (tons) Shpg. Wt. (lbs.)

Vehicle Service Ramps

12.4

20 TON TRUCK RAMPS 13.5" and 18.5" wide steel truck ramps feature non-skid base and non-slip traction plates to keep the ramps and their load in place. Handle retracts for out of the way safety and storage. Durable heavy-duty wheels. Sold in pairs.

Part No.

Capacity (tons)

Length (in.)

Width (in.)

Height (in.)

Pkg. Qty.

Shpg. Wt. (lbs.)

491⁄4

131⁄2

91⁄2

Pair

275.0

455⁄8

181⁄2

91⁄4

Pair

341.0

TR20 TR20W

1,500 LB. MOTORCYCLE SERVICE LIFT • • • •

Ideal for lifting motorcycles and ATV's. Rubber padded lifting platform prevents scratching. Non-slip foot pedal for easy lifting. Tie down strap.

Part No.

Capacity Minimum Maximum (tons) Height (in.) Height (in.)

G49154

3⁄4

41⁄2

161⁄2

Base Length (in.)

Base Width (in.)

Shpg. Wt. (lbs.)

347⁄8

331⁄2

92.0

AIR OPERATED FOOT PUMPS User-friendly, foot-actuated design allows easy control of moving fluid at accelerated rate. Powerful motor has an internal check valve to eliminate pulsing and provide a consistent pressure of up to 10,000 PSI with standard air supply of 90 PSI. Built-in bypass system protects the unit from a pressure overload. • Durable, lightweight, corrosion-free case. • Uses a standard 3⁄8" NPT fluid coupler.

Part No.

Max. Output Pressure (PSI)

Usable Oil Capacity (cu. in.)

Output Flow, No Output Flow Under Load (cu. in./min.) Load (cu. in./min.)

Air Pressure Range (PSI)

Shpg. Wt. (lbs.)

G65426

10,000

36.6

67.0

12.81

90 - 175

18.5

G22903

10,000

91.5

66.5

12.20

90 - 175

18.5

G22905

10,000

122.0

61.02

9.15

90 - 175

22.0

278

www.westwardtools.ca

2/9/10

9:29 AM

Page 279

SHOP PRESSES 10 TON BENCH MODEL PRESS • Moveable head for off-center pressing. • Safety overload system prevents use beyond rated capacity. • Comes complete with pump, ram and hose.

Part No. SP10B

Frame Capacity (tons)

Ram Travel (in.)

Overall Height (in.)

Overall Width (in.)

Shpg. Wt. (lbs.)

6.8

106.0

12 & 20 SHOP PRESSES WITH BOTTLE JACKS • Ideal for removing or installing gears, U-joints, pulleys, wrist pins and other press-to-fit applications. • Excellent for bending, bonding or straightening applications. • Multi-positional bed for work height adjustment. • Heavy-duty, steel welded construction.

Part No. G60120 G60200

Height (in.) Frame Capacity Overall Overall Shpg. Wt. (tons) Minimum Maximum Height (in.) Width (in.) (lbs.) 12

211⁄16

121.3

21⁄2

242.6

25 TON SHOP PRESS WITH HAND PUMP • Ideal for removing or installing gears, U-joints, pulleys, wrist pins and other press-to-fit applications. • Hand pump features 2 speed operation with pressure relief valve for overload protection. • Heavy-duty, steel welded construction.

Part No.

Frame Capacity (tons)

Min. Height (in.)

G20253

21⁄2

www.westwardtools.ca

Max. Overall Overall Shpg. Wt. Height (in.) Height (in.) Width (in.) (lbs.) 34

242.5

279

2/9/10

9:30 AM

Page 280

SHOP PRESSES PROFESSIONAL SHOP PRESSES WITH HAND PUMP • Excellent for bending, bonding or straightening applications. • Multi-position bed for work height adjustment. • Ideal for the removal or installation of gears, universal joints, pulleys, wrist pins, and other press jobs. • 4" pressure gauge.

G93400

Overall Width Shpg. Wt. (in.) (lbs.)

Part No.

Frame Capacity (tons)

Ram Travel (in.)

Overall Height (in.)

G93300

600.0

G93400

791⁄8

760.0

100 TON SHOP PRESS WITH 115 V ELECTRIC MOTOR PUMP • Ideal for removing or installing gears, U-joints, pulleys, wrist pins and other press-to-fit applications. • Heavy-duty, steel welded construction. • Excellent for straightening, bending or bonding applications. • Multi-position bed for work height adjustment. • 115 volt, 1 HP/2 gallon electric pump. • 2 speed operation allows for faster cylinder advance.

Frame Ram Min. Max. Overall Overall Shpg. Capacity Travel Height Height Height Width Wt. (in.) (lbs.) (in.) (in.) (in.) (in.) Part No. (tons) G93610

100

111⁄4

891⁄2

1,550.0

15 TON HYDRAULIC PIPE BENDER • Develops 15 tons of thrust at 10,000 PSI. • Heavy-duty steel welded construction. • Complete with 7 different size attachments for a wide selection of pipe sizes. • 1⁄2", 3⁄4", 1", 11⁄4", 11⁄2", 2" and 3". • Will bend high pressure tubing, hydraulic, gas, steel, aluminum and brass pipe in these sizes.

Dimensions Shpg. Maximum Cylinder Wt. (in.) Working Capacity Stroke (in.) Pressure (PSI) L x W x H (lbs.) Part No. (tons) G66150

280

97⁄8

10,000

303⁄8 x 281⁄2

147.0

www.westwardtools.ca

2/9/10

9:31 AM

Page 281

FLOOR CREEPERS

HIGH RISE CREEPER SEAT Provides lower back support and eliminates knee strain. One inch tubular steel frame. Tray bottom is 15" x 15" and includes a magnetic strip for holding small parts. Wide track 3" oil-resistant casters swivel easily and provide excellent stability.

Part No.

Description

A201

High Rise Creeper Seat

Shpg. Wt. (lbs.) 21.0

PROFESSIONAL CREEPER SEAT Padded high back seat provides lower back support and is easily adjustable from 17" to 22" in height. Wide seat bottom provides additional comfort and swivels 360°. One inch tubular steel framework and tray bottom with magnetic strip for holding small parts. 3" oil-resistant swivel casters.

Part No.

Description

Shpg. Wt. (lbs.)

A200

Professional Creeper Seat, Adjustable

27.0

STEEL RAIL CREEPERS Fully padded creepers feature thick padded deck and head rest to provide maximum comfort. Heavy-duty 3⁄4" steel tubular frame has powder coated finish to resist rust or corrosion. Sturdy 40" metal frame construction incorporates four supporting cross rails and six 21⁄2" oil resistant wheels. Drop Shoulder Creeper with Removable Headrest Item no. A202 features an adjustable multi-position headrest and drop shoulder rails to provide for unrestricted arm movement.

Part No. Description

A202

Length Width Shpg. (in.) (in.) Wt. (lbs.)

A30

40" Metal Frame Creeper

16.0

A202

40" Metal Frame Creeper, Adjustable Headrest

171⁄4

18.0 A30

www.westwardtools.ca

281

2/9/10

9:32 AM

Page 282

HAND TRUCKS

STEEL HAND TRUCKS All welded tubular steel construction. For use in the trucking, distribution and warehousing industries. • Welded axles and gusset add strength and durability. • 7 gauge beveled nose plate with rounded corners eases load pick up. • Powder coat finish prevents rust for longer life. • Uncrimped welds for added strength.

Capacity Nose Plate Tire Diameter Shpg. (lbs.) (in.) (in.) Wt. (lbs.)

Part No. Description HT65P

Flow Handle, Pneumatic Tire

650

8 x 14

33.0

HT65PL Loop Handle, Pneumatic Tire

650

8 x 14

38.0

Capacity Nose Plate Tire Diameter Shpg. (lbs.) (in.) (in.) Wt. (lbs.)

Part No. Description HT300

Flow Handle, Solid Tire

300

8 x 14

27.0

HT800

Flow Handle, Solid Tire

800

8 x 14

38.0

STEEL HEAVY-DUTY CONVERTIBLE HAND TRUCKS • Versatile, convertible hand trucks can be used in both horizontal and vertical positions. The 1" diameter flow back handle is removable and can be used in both horizontal and vertical set-ups. • Durable 15⁄16" diameter tubular steel frame, manufactured with un-crimped welds. • Powder coat finish prevents rust for longer life. • Guards welded to the front of the frame and at the wheels protect loads from catching the wheels and causing damage.

Capacity (lbs.) Vertical

Capacity (lbs.) Horizontal

Nose Plate (in.)

Tire Diameter (in.)

Shpg. Wt. (lbs.)

Convertible, Pneumatic Tire

400

500

8 x 14

47.0

Convertible, Pneumatic Tire

600

750

8 x 14

47.0

Part No.

Description

HTC500S HTC750P

282

www.westwardtools.ca

2/9/10

9:33 AM

Page 283

HAND TRUCKS STEEL & ALUMINUM FOLDING HAND TRUCKS • Folds for easy storage. • Rubber tread tires. • Quick set-up. Simply push down nose plate and extend handle.

Part No. HTF200L

Description

Capacity (lbs.)

Wheel Size (in.)

Nose Plate (in.) W x D

Shpg. Wt. (lbs.)

200

14 x 20

13.0

Steel & Aluminum Folding Hand Truck

HEAVY-DUTY ALUMINUM HAND TRUCKS • Converts from vertical to horizontal position with ease. • Long handle option available. • 10" pneumatic wheels.

Part No. HTC750AP

Description Heavy-Duty Aluminum Hand Truck

HTC750ALP Heavy-Duty Long Handle

Shpg. Folded Unfolded Wt. Dimensions Dimensions Capacity (in.) L x W x H (in.) L x W x H (lbs.) (lbs.) 700

44 x 20 x 41

18 x 20 x 52

40.0

700

57 x 20 x 45

19 x 20 x 60

46.0

Aluminum Hand Truck

ALUMINUM APPLIANCE TRUCK • 6" wheels. • All-aluminum construction. • Ratchet strap secures load to truck.

Part No. HTA500A

Description Aluminum Appliance Truck

Capacity (lbs.)

Dimensions (in.) LxWxH

Shpg. Wt. (lbs.)

550

60 x 24 x 12

40.0

HEAVY-DUTY ALUMINUM APPLIANCE TRUCK • • • •

6" wheels. All-aluminum heavy-duty construction. Ratchet strap secures load to truck. Wheel guards standard.

Part No. HTA500AHD

Description Heavy-Duty Aluminum Appliance Truck

www.westwardtools.ca

Capacity (lbs.)

Dimensions (in.) LxWxH

Shpg. Wt. (lbs.)

550

60 x 24 x 12

50.0

283

2/9/10

9:34 AM

Page 284

DRUM HANDLING DRUM CRADLE • • • •

Conveniently handles and stores 45 gallon drums. Easy and clean fluid transfer. 16" clearance from floor to dispensing. Durable 15⁄16" diameter tubular steel.

Part No.

Description

Capacity (lbs.)

Shpg. Wt. (lbs.)

DC800

Drum Cradle

800

18.0

DRUM DOLLY Conveniently handles and transports drums. • Hold heavy shop drums. • Heavy-duty phenolic casters.

Part No.

Description

DD750

Drum Dolly, 45 Gal.

Capacity (lbs.)

Shpg. Wt. (lbs.)

750

23.0

ADJUSTABLE DRUM TROLLEY • Adjustable drum trolley for 5 – 16 gallon drums. • Fitted with 2 wheels for easy moving.

Part No.

Description

DT20

Adjustable Drum Trolley

Shpg. Wt. (lbs.) 58.0

DRUM TROLLEY • Use with 55 gallon/210 litre drums. • Fitted with 2 extra heavy-duty wheels and a third lockable wheel.

284

Part No.

Description

DT205

Shpg. Wt. (lbs.)

Heavy-Duty Drum Trolley

100.0

www.westwardtools.ca

2/9/10

9:35 AM

Page 285

DRUM HANDLING

DRUM LOADER • Easily and quickly lift drums. • Simply slip onto forks and tighten hand screws. • Heavy-duty steel construction.

Part No.

Capacity (lbs.)

Max. Drum Dia. (in.)

Shpg. Wt. (lbs.)

600

50.0

DL30

FORK MOUNTED DRUM GRAB • • • • • •

Easily and quickly lift drums without hydraulic or electrical connections. Easily fits onto most forklifts. Transport and deposit drums without leaving the drivers seat. Automatic drum release. Fits 55 gallon drums. 1,500 lbs. capacity.

Part No. DG68

Capacity (lbs.)

Number of Drums

Fork Pocket ID (in.)

Shpg. Wt. (lbs.)

1,500/Drum

51⁄2 x 2

145.0

DRUM STACKER • Easily stack and lift drums. • 700 lb. capacity.

Part No. DS35

Description Drum Stacker

Maximum Lifting Capacity Height (in.) (lbs.) 700

www.westwardtools.ca

Overall Width (in.)

Turning Radius (in.)

Shpg. Wt. (lbs.)

288.0

285

W286-10.qxp

2/12/10

3:20 PM

Page 286

PALLET TRUCKS

LIGHTWEIGHT ECONOMY PALLET TRUCK • Exceptionally strong but lightweight steel construction. • Epoxy powder coated finish which resists chips and corrosion. • Welded joints and reinforced fork tips for durability.

Capacity Part No. PT2748E

Width Across

Height (in.)

Forks (in.)

Shpg. Wt.

(lbs.)

Lowered

Raised

Forks (in.)

WxL

(lbs.)

4,400

27⁄8

71⁄2

61⁄4 x 48

132.0

PALLET JACKS • Hand actuated control lever for selecting “RAISE”, “NEUTRAL” and “LOWER” positions. • 4YX96 has cast aluminum hub with polyurethane coating. • 4YX97 has steel hub with polyurethane coating.

Forks Overall Shpg. Width Height (in.) (in.) Length Wt. Across Capacity (lbs.) (in.) Part No. (lbs.) Lowered Raised Forks (in.) W x L 4YX96

5,800

27⁄8

73⁄4

7 x 48

205.0

4YX97

5,800

27⁄8

73⁄4

7 x 48

195.0

FOUR DIRECTIONAL PALLET JACK • • • • •

Innovative 4-directional capability. Designed to allow the pallet to be moved in a direction perpendicular to the fork. Steering wheels constructed of steel hub with polyurethane coating. 12 strokes to raised height. 210° steering radius.

Capacity

286

Part No.

(lbs.)

5NP21

5,500

Height (in.)

Width Across

Forks Overall Shpg. (in.) Length Wt.

Lowered Raised Forks (in.) W x L 27⁄8

73⁄4

7 x 48

(in.)

(lbs.)

210.0

www.westwardtools.ca

2/9/10

9:37 AM

Page 287

PALLET TRUCKS

PALLET TRUCK WITH SCALE • Large LED display. • Key pad and automatic tare functions.

Part No. PT2845SC

Capacity (lbs.)

Lowered Height (in.)

Raised Height (in.)

Width Across Forks (in.)

Forks (in.) WxL

Shpg. Wt. (lbs.)

4,400

711⁄16

611⁄16 x 45

290.0

HEAVY DUTY 5 TON PALLET TRUCK • Welded joints and reinforced fork tips. • Nylon steering wheel with double nylon wrapped steel fork rollers. • Requires 10 strokes to reach maximum height.

Part No. PT2748-5T

Capacity (lbs.)

Lowered Height (in.)

Raised Height (in.)

Width Across Forks (in.)

Forks (in.) WxL

Shpg. Wt. (lbs.)

11,000

105⁄8

7 x 48

238.0

PALLET TRUCKS WITH BACKREST • Helps balance loads. • Provides some protection for operator if the load shifts.

Part No. PT2748BR

Capacity (lbs.)

Lowered Height (in.)

5,500

33⁄8

www.westwardtools.ca

Width Raised Across Height Forks (in.) (in.) 11

Forks (in.) WxL

Shpg. Wt. (lbs.)

7 x 48

231.0

287

2/9/10

9:38 AM

Page 288

PALLET TRUCKS

STAINLESS STEEL PALLET TRUCKS Ideally suited for food processing, pharmaceutical warehousing, cleanrooms and other applications requiring wash down. Ideal for very low temperature conditions.

Part No. PT2748SS

Capacity (lbs.)

Lowered Height (in.)

5,500

27⁄8

Width Raised Across Height Forks (in.) (in.) 71⁄2

Forks (in.) WxL

Shpg. Wt. (lbs.)

65⁄16 x 48

176.0

GALVANIZED PALLET TRUCK • Galvanized finish. • Suited for applications where corrosion may be an issue.

Part No.

Capacity (lbs.)

Lowered Height (in.)

Raised Height (in.)

Width Across Forks (in.)

Forks (in.) WxL

Shpg. Wt. (lbs.)

PT2748G

5,500

27⁄8

71⁄2

65⁄16 x 48

120.0

HI-LIFT PALLET TRUCK • Suitable as pallet truck/scissor lift table. • Support legs come into operation automatically. • Truck automatically slows the descending speed when heavy goods loaded to help prevent cargo damage. • 210 degree turning radius.

Part No. PT2745HL

288

Capacity (lbs.)

Lowered Height (in.)

Raised Height (in.)

Width Across Forks (in.)

Forks (in.) WxL

Shpg. Wt. (lbs.)

2,200

33⁄4

65⁄16 x 45

220.0

www.westwardtools.ca

2/9/10

9:39 AM

Page 289

PALLET TRUCKS

PALLET TRUCK WITH BRAKE SYSTEM • Brake shoes inside both steering wheels. • Brake lever is tension locked with an adjustable notched lever. • Ideal for use on ramps and grades.

Capacity (lbs.)

Part No. Description PT2748B Pallet Truck With Brake

Shpg. Wt. (lbs.)

Forks Width Lowered Raised (in.) Height Height Across (in.) Forks (in.) W x L (in.)

4,400

27⁄8

71⁄2

61⁄4 x 48

132.0

LOW PROFILE PALLET TRUCK • 2" lowered fork height. • 3,300 lb. capacity. • Steel fork wheel.

Part No. PT2748LP

Capacity Lowered Raised (lbs.) Height (in.) Height (in.) 3,300

51⁄2

Width Across Forks (in.)

Forks (in.) WxL

Shpg. Wt. (lbs.)

5.9 x 48

130.0

Width Across Forks (in.)

Forks (in.) WxL

Shpg. Wt. (lbs.)

4 x 311⁄2

77.0

MINI PALLET TRUCK • Only 77 pounds. • Can be used in restricted spaces. • Ideal for moving office fixtures.

Part No. PT1531M

Capacity Lowered Raised (lbs.) Height (in.) Height (in.) 1,100

23⁄8

57⁄8

PALLET TRUCK STOP • Keeps truck in place to prevent damage in transit. • Rubber construction provides a firm grip to floor.

Part No.

Description

PTS1

Pallet Truck Stop

www.westwardtools.ca

Shpg. Wt. (lbs.) 0.1

289

W290-10.qxp

2/12/10

3:27 PM

Page 290

SERVICE CARTS

SCISSOR LIFT SERVICE & TRANSPORT CARTS Part No.

Description

Capacity (lbs.)

Minimum Height (in.)

Maximum Height (in.)

Shpg. Wt. (lbs.)

LT330

Scissor Lift Table

300

8.7

27.75

101.4

LT660

Scissor Lift Table

600

10.6

29.9

141.1

275 LBS. STEEL PLATFORM TRUCK • • • •

Powder coated steel frame. 275 lb. (130 kg) capacity. 4" rubber casters. Platform size: 29" x 18.7".

Part No.

Capacity (lbs.)

Deck Size (in.) W x L

Shpg. Wt. (lbs.)

250

19 x 29

25.0

PLT13

660 LB. STEEL PLATFORM TRUCK • • • •

Powder coated steel frame. 660 lb. (300 kg) capacity. 4" rubber casters. Platform size: 49.5" x 24".

Part No.

Description

PLT30S

Steel Platform Truck

Capacity (lbs.) Deck Size (in.) W x L Shpg. Wt. (lbs.) 600

24 x 49

25.0

FOLDING STEEL & ALUMINUM PLATFORM TRUCK • • • • •

290

Steel handle with aluminum platform. 220 lb. (100 kg) capacity. 4" rubber casters. Extended platform size: 28.5" x 16.3". Folded platform size: 19.7" x 16.3".

Part No.

Description

PLT10A

Aluminum Platform Truck

Capacity (lbs.)

Deck Size (in.) WxL

Shpg. Wt. (lbs.)

200

16 x 28

25.0

www.westwardtools.ca

2/9/10

9:41 AM

Page 291

SERVICE CARTS

SERVICE CARTS • • • •

30" high. Sturdy metal construction. Durable swivel casters with brakes. TC291S has a drawer complete with ball bearing slide.

Part No. Description

Size (in.)

Shpg. Wt. (lbs.)

TC283S

3 Shelf Service Cart

28 x 14

32.6

TC291S

3 Shelf Service Cart with One Drawer

29 x 15

23.0

LANDSCAPE CART Transport an assortment of items including plants, shrubs, trees or any other similar materials. Large pneumatic tires.

Part No. TC48W

Length (in.) Width (in.) 24

Height (in.)

Wheel Size (in.)

Shpg. Wt. (lbs.)

95.0

HEAVY-DUTY SHELVING • • • • • •

Heavy-duty steel construction. MDF board inset into shelf bracket. Strong rivet design. Arrange in different configurations. SU2448HD features 3⁄8" MDF shelving. SU2466HD features 1⁄2" MDF shelving.

Part No.

SU2466HD

Description

Size (in.)

Capacity per Shpg. Wt. Shelf (lbs.) (lbs.)

SU2448HD 5 Shelf Storage Shelving

24 x 48 x 72

500

90.0

SU2466HD 5 Shelf Storage Shelving

24 x 66 x 72

600

165.0

SU2448HD

FOLDING CHAIRS • Molded polypropylene seat and back. • Powder coated metal legs. • Deluxe model features wide seat and back rest.

Part No.

Description

FCF18P

Regular Folding Chair

15.0

FCF18PHD

Deluxe Folding Chair

16.0

www.westwardtools.ca

Shpg. Wt. (lbs.)

291

2/9/10

9:42 AM

Page 292

TABLES RECTANGLE FOLD-IN-HALF TABLES • Portable, folds in half for easy storage and manueverability. • Granite coloured table top. • Gray powder coated legs.

Part No. Description Fold In Half Rectangular FTF9630PH

Size (ft.) WxL

Shpg. Wt. (lbs.)

21⁄2 x 8

50.0

21⁄2 x 6

35.0

21⁄2 x 4

30.0

Table

FTF7230PH Fold In Half Rectangular Table

FTF4830PH Fold In Half Rectangular Table

RECTANGULAR FOLDING TABLES • Folding legs to save space. • Granite coloured table top. • Gray powder coated legs.

Part No. FTF9630P FTF7230P

Size (ft.) WxL

Shpg. Wt. (lbs.)

Folding Rectangular Table

21⁄2 x 8

30.0

Folding Rectangular Table

21⁄2 x 6

30.0

Description

ROUND FOLDING TABLES • • • • •

Table legs fold away for easy movability and storage. Lightweight. Easy to clean. Gray powder coated legs. Granite coloured table top.

Diameter (ft.)

Shpg. Wt. (lbs.)

FTF45PR Folding Round Table

33⁄4

40.0

FTF60PR Folding Round Table

45.0

Part No. Description

292

www.westwardtools.ca

2/9/10

9:43 AM

Page 293

TARPS GENERAL DUTY POLYETHYLENE TARPS Sturdy seams resist tearing and mildew. Finished size is slightly smaller than cut size. Tarps are made from high-density 10 x 10 weave (1000 denier) of polyethylene fibers coated on both sides with 1.8 mil thick polyethylene sheets. Lightweight and low-cost fabric weighs only 3.5 oz. per square yard, wet or dry. Seams are heat-sealed with polyethylene rope lined hems. • Superior resistance to UV rays, mildew and tears. • Easy to handle at high or low temperatures. • Rustproof aluminum grommets every 36".

Part No.

Size (ft.)

Shpg. Wt. (lbs.)

TP68

6x8

1.1

TP810

8 x 10

2.0

TP1012

10 x 12

4.6

TP1216

12 x 16

26.2

TP1520

15 x 20

48.7

TP2030

20 x 30

64.3

TP3050

30 x 50

72.4

HEAVY-DUTY POLYETHYLENE TARPS Super-strong and highly tear-resistant, these tarps feature a special ultraviolet treatment that protects against fading. Durable 14 x 14 weave (1000 denier). • Made of 5.4 oz./sq. yd. heavy gauge material. • Resist UV rays, water and mildew. • Rustproof aluminum grommets every 18". • Reinforced corners.

Part No. TP68HD

Size (ft.)

Shpg. Wt. (lbs.)

6x8

1.9

TP1012HD

10 x 12

5.2

TP1216HD

12 x 16

6.8

TP1620HD

16 x 20

8.7

TP2030HD

20 x 30

9.9

VINYL LAMINATED NYLON TARPS Lighter than canvas, non-absorbent and flame resistant, these 13 oz. nylon tarps are suited for long term outdoor use covering trucks, boats and equipment. • Superior resistance to UV rays, tears, water and flame. • Flexible at low temperatures and in damp conditions. • Nickel-plated brass grommets every 24".

Part No. TP68L TP1012L

Size (ft.)

Shpg. Wt. (lbs.)

6x8

4.2

10 x 12

10.6

TP1216L

12 x 16

16.9

TP1620L

16 x 20

28.3

TP2030L

20 x 30

53.0

www.westwardtools.ca

293

2/9/10

9:44 AM

Page 294

PARTS CLEANER BENCH TOP PARTS CLEANER Compact bench top parts washer and soak tank. Heavy-duty metal construction. Fusible link fire lid automatically closes at predetermined temperature in the event of fire. Solvent resistant submersible pump recirculates solvent through adjustable metal hose to aid in parts cleaning. 31⁄2 gallon capacity tank. 115 volt operation.

Part No. Description Bench Top Parts PC35P

Parts Cleaning Area (in.)

Shpg. Wt. (lbs.)

18 x 12 x 10

16.5

Washer

20 GALLON PARTS CLEANER Heavy-duty metal construction. Fusible link fire lid automatically closes at predetermined temperature in the event of fire. Solvent resistant submersible pump recirculates solvent through a fully adjustable metal hose. Mild steel tank with durable powder coated finish. 20 gallon capacity tank. 115 volt operation. • Convenient parts storage shelf. • Shelf supports parts above the fluid level for easy cleaning.

Part No. Description Parts Cleaner 20 PC20S

Parts Cleaning Area (in.)

Shpg. Wt. (lbs.)

30 x 20 x 36

56.7

gal./90.0 L

40 GALLON PARTS CLEANER Large capacity parts washing/soaking tank. Heavy-duty metal construction. Fusible link fire lid automatically closes at predetermined temperature in the event of fire. Solvent resistant submersible pump recirculates solvent through a fully adjustable metal hose. Mild steel tank with durable powder coated finish. 40 gallon capacity tank. 115 volt operation. • Convenient parts storage shelf. • Removable parts basket for small parts. • Shelf supports parts above the fluid level for easy cleaning.

Part No. Description Parts Cleaner, 40 PC40S

Parts Cleaning Area (in.)

Shpg. Wt. (lbs.)

45 x 22 x 36

80.0

Gal./180 L

20 GALLON PNEUMATIC PARTS CLEANER Air operated heavy-duty parts cleaner. Eliminates the need for traditional solvent pumps. Fusible link fire lid automatically closes at predetermined temperature in the event of fire. Solvent is recirculated through on board solvent cleaning brush. Mild steel tank with durable powder coated finish. 20 gallon capacity tank. 115 volt operation. • Pneumatic cleaning gun. • Swivel casters for easy maneuverability.

Part No. PC20PP

294

Parts Cleaning Shpg. Wt. Area (in.) (lbs.)

Description Pneumatic Parts Cleaner, 20 Gal./90 L

28 x 19 x 71⁄2

80.0

www.westwardtools.ca

2/9/10

9:45 AM

Page 295

BENCH GRINDERS

BENCH GRINDERS Bench grinders are all CSA approved, closed construction, with full ball bearing motors. Quality windings and electrics ensure long-life and trouble free grinding. Replacement eyeshield set BG8C11 fits both units.

Part No.

Motor HP

Wheel Size (in.) RPM (High)

Voltage

Amps Input

Height (in.) Width (in.)

Shpg. Wt. (lbs.)

BG6C

1⁄2

6 x 3⁄4

3,450

115

3.5

25.0

BG8C

3⁄4

8x1

3,450

115

8.0

51.0

HEAVY-DUTY INDUSTRIAL BENCH GRINDERS • • • • •

Enclosed ball bearing motor. Compact motor housing. Removable wheel guards. Adjustable two-way tool rests for wheel wear and angle grinding. Complete with spark guards and safety eyeshields.

Wheel Size (in.)

Arbor (in.)

Exhaust Ports

Voltage

Height (in.)

Width (in.)

Motor HP

RPM

Shpg. Wt. (lbs.)

1⁄2

115/230

181⁄2

1⁄3

3,450

26.0

BG8D

5⁄8

Yes

115/230

3⁄4

3,450

53.0

BG10D

Yes

115/230

131⁄2

1,725

118.0

Part No. BG6D

12" INDUSTRIAL BENCH GRINDER WITH STAND • • • • •

Enclosed ball bearing motor. Compact motor housing. Removable wheel guards. Adjustable two-way tool rests for wheel wear and angle grinding. Complete with spark guards, safety eyeshields, dust collection hose and stand.

Part No. BG12D

Wheel Size (in.)

Arbor (in.)

Exhaust Ports

Voltage

Height (in.)

Width (in.)

Motor HP

RPM

Shpg. Wt. (lbs.)

11⁄4

Yes

220 1 PH

1,725

230.0

HEAVY-DUTY BENCH GRINDER STAND Accommodates BG6D, BG8D, BG10D and BG12D.

Part No.

Description

Shpg. Wt. (lbs.)

BGS

Grinder Stand

60.0

www.westwardtools.ca

295

2/9/10

9:45 AM

Page 296

MILL DRILLS

DRILL PRESSES • Precision machined steel column provides greater rigidity. • Precision machined heavy cast iron base provides greater stability. • Rack and pinion designed table adjustment allows for smooth and easy table height setting. • On/Off switch with removable locking key for greater safety. • Reliable ball bearing induction motor for consistent working power. • Tilting cast iron work table for greater versatility (DP170F only).

Part No.

Spindle Taper

Chuck Capacity (in.)

Spindle Travel (in.)

Swing (in.)

Height (in.)

No. of Speeds

DP2000

JT33

1⁄2

227⁄8

1⁄2

44.0

DP170F

MT2XJ13

5⁄8

31⁄4

647⁄8

1⁄2

179.0

DP270F

MT3

3⁄4

43⁄4

657⁄8

1 HP

359.0

Motor

Shpg. Wt. (lbs.)

GEARED HEAD FLOOR MODEL DRILLING MACHINE • Complete with power down feed. • Variable speed. • Production duty.

Part No.

Capacity in Mild Steel (in.)

Motor HP

Voltage

RF40S2F

11⁄4

220/1 Ph.

296

Spindle RPM Range Taper 60 - 1,500

MT3

Spindle Travel/ Stroke (in.)

Swing (in.)

Table Size (in.)

Shpg. Wt. (lbs.)

5.1

20.4

21.9 x 19.5

660.0

www.westwardtools.ca

2/9/10

9:46 AM

Page 297

MILL DRILLS

RF31

RF40

BELT DRIVE MILLING/DRILLING MACHINE • Heavy cast construction. • Complete with milling table. • Adjustable depth stop.

Capacity in Mild Motor Part No. Steel (in.) HP

Voltage

RF31

220/1 Ph. 150 - 3,000

11⁄4

11⁄2

RPM Range

Spindle Taper R8

Cross LongiSpindle Travel Travel/ Swing Table Size tudinal Travel (in.) (in.) Stroke (in.) (in.) (in.) 5.1

13.4

28.7 x 8.3

16.9

7.3

Shpg. Wt. (lbs.) 660.0

GEARED HEAD MILLING/DRILLING MACHINE • Complete with power down feed. • Variable speed. • Production duty.

Part No. RF40

Capacity in Mild Motor Steel (in.) HP 11⁄4

Voltage

RPM Range

Cross Shpg. Spindle Travel/ Swing Table Longitudinal Travel Wt. Spindle (lbs.) (in.) Taper Stroke (in.) (in.) Size (in.) Travel (in.)

220/1 Ph. 60 - 1,500

5.1

20.4

28.7 x 8.3

19.75

660.0

7" X 12" BANDSAW • • • • • • •

Built-in coolant system. Heavy cast iron table. Adjustable roller bearing blade guides. Automatic shut-off. Four cutting speeds. Round cutting capacity at 90° 7" at 45° 41⁄3". Rectangular cutting capacity at 90° 12" at 45° 7".

Part No. UE712

Max. HP

Voltage

Shpg. Wt. (lbs.)

115

330.0

www.westwardtools.ca

297

2/9/10

9:47 AM

Page 298

BANDSAWS

PORTABLE BANDSAW • • • •

Quick action vise. Very easy to carry. Variable blade speed. Sturdy gear drive structure.

Part No. UE120SV

Max. Capacity HP Voltage (in.) 1⁄2

120

4x6

Blade Speed (FPM)

Blade Size (in.)

99 - 214

1⁄2

Shpg. Wt. (lbs.)

x 0.025 x 61

61.0

4" X 6" PORTABLE BANDSAW • 115 V, 1⁄3 HP motor. • Cuts 4" x 6" at 90°. • Cuts 3" x 4" at 45°.

Part No. RF128

Capacity (in.)

Motor HP

4x6

1⁄3

Blade Speed (FPM) Blade Size (in.) 79, 122, 201

Shpg. Wt. (lbs.)

0.5 x 0.025 x 64.5

135.0

PORTABLE GASLESS WIRE FEED WELDER Portable gasless wire feed welder is ideal for use with mild steel and mild alloy steel. Operates on 115 volt input power for maximum versatility. Features two power settings, infinite stepless wire speed control, overload and thermal protection. Optional universal 2 shelf welding cart, item no. WECART2 or deluxe 3 shelf welding cart, item no. WECART1 available. • 6' Tweco compatible MIG gun. • 6' ground cable clamp. • 2 – 0.035" contact tips. • CSA certified. Process: Flux-Cored (FCAW) 0.030"/0.035" Input Power: 115 V 1 PH Rated Output: 80 A at 20% Duty Cycle Amp Range: 65/80 A DC

Part No. Description WEMW100LD No Gas/Flux Core

Input Power

115 V Only MIG Welder 20 A 1/PH

298

Rated Output at Open Shpg. 20% Duty Amperage Circuit Wt. Cycle Range Voltage (lbs.) 80 A

65/80 A

35.2

www.westwardtools.ca

2/9/10

9:48 AM

Page 299

WELDING PORTABLE GAS/NO GAS WIRE FEED WELDER Portable Gas/No Gas wire feeder welder ideal for use with mild steel and mild alloy steel. Operates on 115 volt input power for maximum versatility. Features step voltage control settings, infinite stepless wire speed control, overload and thermal protection. Optional universal 2 shelf welding cart, item no. WECART2 or deluxe 3 shelf welding cart, item no. WECART1 available. • 6 ft. Tweco-compatible MIG gun. • 6 ft. ground cable and clamp. • Dual gauge gas regulator, gas hose and dual-groove drive roll. • CSA certified.

Part No.

Description

WEMW130LD

Gas/No-Gas MIG Welder

MIG/STICK WELDER Portable MIG/Stick welder ideal for use with mild steel and mild alloy steel. IGBT inverter welder delivers great arc starts and provides smooth DC output. Features stepless wire speed adjustment and current control, fan cooling and thermal overload protection. Handles wire spools up to 10 lbs. (5 kg). Processes: Stick MIG (GMAW) Flux Cored (FCAW) Input Power: 230 V 1 PH

Part No.

Description

Processes: MIG (GMAW) 0.023"/0.030" Flux-Cored (FCAW) 0.030"/0.035" Input Power: 115 V 1 PH Rated Output: 70 A at 20% Duty Cycle Amp Range: 30 – 80 A DC

Input Power

Rated Output at 20% Duty Cycle

Amperage Range

Open Circuit Voltage

Shpg. Wt. (lbs.)

115 V 20 A 1/PH

70 A

30 - 80 A

41.8

Rated Output: 160 A 30% Duty Amp Range: 30 – 160 A DC Optional deluxe 3 shelf welding cart available, item no. WECART1. • 10 ft. Tweco-compatible MIG gun. • 10 ft. welding cable with electrode holder. • 10 ft. ground cable and clamp. • Gas regulator and 10 ft. gas hose. • 3 – 0.030" contact tips, spool of 0.030 MIG and flux cored wire and 20 electrodes. • CSA certified.

Input Power

WENW180MS Stick/MIG Welder 230 V 21 A 1/PH

LIGHT INDUSTRIAL MIG WELDER Portable MIG welder ideal for use with mild steel and mild alloy steel. IGBT inverter welder delivers great arc starts and provides smooth DC output. Features infinite wire speed adjustment, step current control, fan cooling and thermal overload protection. Comes ready to weld with or without shielding gas using self shielding flux cored wire. Handles wire spools up to 10 lbs. (5 kg.). Processes: MIG (GMAW) Flux Cored (FCAW)

Part No.

Description

Open Circuit Voltage

Shpg. Wt. (lbs.)

160

30 - 160 A

0.023 - 0.035

0.030 - 0.035

36.0

Input Power: 230 V 1 PH Rated Output: 145 A at 15% Duty Amp Range: 30 – 145 A DC Optional deluxe 3 shelf welding cart available, item no. WECART1. • 6 ft. MIG gun with 0.030 contact tip. • 6 ft. ground cable and clamp. • Gas regulator and 2.4 ft. gas hose. • 0.023 and 0.030" contact tips, spool of 0.030 flux cored wire and a chipping hammer. • CSA certified.

Input Power

WEMW190LD Light Ind. MIG Welder 230 V 25 A 1/PH

www.westwardtools.ca

Cored Wire Feed Size Range (in.)

Solid Wire Rated Output at 30% Duty Amperage Feed Size Range (in.) Cycle Range

Solid Wire Rated Output at 30% Duty Amperage Feed Size Range (in.) Cycle Range 145

30 - 145 A

0.023 - 0.030

Cored Wire Open Shpg. Circuit Wt. Feed Size Range (in.) Voltage (lbs.) 0.030 - 0.035

66.0

299

2/9/10

9:49 AM

Page 300

WELDING DELUXE WELDING CART The deluxe three shelf MIG cart is designed to hold all portable MIG welders, welding tools, accessories, consumables and shielding gas cylinders. The top shelf conveniently positions the welder for easy set-up and adjustment. Equipped with two wheels and two casters for ease of moving. Holds cylinders up to 71⁄2" diameter and 80 lbs.

Part No.

No. of Shelves

Description

WECART1 Deluxe Welding Cart

Load Capacity Dimensions Shpg. Wt. (lbs.) (in.) L x W x H (lbs.)

110

27.2 x 15.8 x 28.3

31.0

ECONOMY WELDING CART The universal MIG cart is designed to hold all portable MIG welders, welding tools, accessories, consumables and gas cylinders. Rear wheels and casters make it easy to move around. Slanted top shelf makes the weld controls accessible. Holds up to 71⁄2" diameter, 80 lb. cylinder.

Part No.

No. of Load Capacity Dimensions Shpg. Wt. Shelves (lbs.) (in.) L x W x H (lbs.)

Description

WECART2 Economy Welding Cart

HANDY CUT 40 PLUS This single phase inverter plasma unit is ideal for HVAC and sheet metal contractors, auto body repair, farm and hobby delivering very good cutting performance. Weighing only 17.6 lbs. this unit offers a high level of portability and versatility. Features built-in air pressure regulator, air pressure gauge, fan cooling, convenient front panel controls and thermal overload protection.

Input Description Power

Part No. WEPC40LD Handy Cut 40 Plus

110

31.9 x 16.5 x 19.7

25.0

Processes: • Air plasma cutting. Includes: • Trafimet hand-held torch with 9.8 ft. cable. • Heavy-duty work clamp with 9.8 ft. cable. • Power cord. • Gas hose with connector. • Electrode and cutting nozzle set. • CSA certified.

Rated Rated Cut Maximum Net Shpg. Output at Capacity Cutting Weight Wt. Duty Cycle (mm) Capacity (mm) (lbs.) (lbs.)

230 V, 1 40 A @ 35% Ph/60 Hz.

17.6

20.0

WEPC40LD-CL

WESTWARD PLASMA TORCH & CONSUMABLES

WEPC40LD-CVR

WEPC40LD-ELE

300

Part No.

Description

Shpg. Wt. (lbs.)

WEOC40LD27

Cutting Torch

0.3

WEPC40LD-ELE

Electrode, 3 Pack

0.1

WEPC40LD43

Electrode, Long, 3 Pack

0.1

WEPC40LD-NZL

Nozzle, 3 Pack

0.1

WEPC40LD26

Ground Cable

0.7

WEPC40LD-CL

Ground Clamp

0.2

WEPC40LD-CVR

Cover

0.3

WEGASHO

Gas Hose, 3 m

0.3

www.westwardtools.ca

2/9/10

9:50 AM

Page 301

WELDING LIGHT-DUTY AUTO-DARKENING WELDING HELMET adjustable sensitivity, grind mode and light shade 3.5. Features two arc sensors for reliable, fast 1/25,000 sec. switching. Responds exceptionally well to very low amperage TIG arcs (DC 3 amp, AC 5 amp). Meets the requirements of ANSI Z87.1. CSA certified to Z94.3 standards.

Solar powered light-duty series ADF helmet offers full coverage and maximum UV/IR protection. Lightweight full size helmet weighing only 15 oz. Flame resistant, high impact nylon shell provides ultimate welder protection. Fully automatic on/off with externally adjustable sensitivity control. The ADF lens offers high quality optics, variable shade ranges 9-13 with

Switching Time (Light to Dark)

Part No. Description

Shade Range

Viewing Area (in.)

No. of Sensors

Operating Temperature (°C)

19⁄16 x 37⁄8

-5° - +55°C

Weight Shpg. Wt. (net) (lbs.)

Westward Light-Duty Auto-Darkening Helmet WEH8P

Welding Helmet

1/25,000 sec.

9-13 Variable, 3.5 Light

Solar powered hobby series ADF helmet offers full coverage and maximum UR/IR protection. Lightweight full size helmet weighing only 15 oz. Flame resistant, high impact nylon shell provides ultimate welder protection. Fully automatic on/off with externally

Part No.

Shpg. Operating Viewing Area No. of Temperature Weight Wt. (lbs.) (°C) (net) (in.) Sensors

Shade Range

Westward Hobby Auto-Darkening Helmet Welding 1/10,000 sec. 9-13 Variable, 19⁄16 x 37⁄8 WEH8LD Helmet

0.9

adjustable sensitivity control. The ADF lens offers high quality optics, variable shade ranges 9-13 with adjustable sensitivity, grind mode and light shade 3.5. Features two arc sensors for reliable, fast 1/25,000 sec. switching. Meets the requirements of ANSI Z87.1. CSA certified to Z94.3 standards.

HOBBY ADF WELDING HELMET

Switching Time (Light Description to Dark)

15 oz.

-5° - +55° C

15 oz.

0.9

3.5 Light

PARTS & ACCESSORIES FOR WESTWARD AUTO-DARKENING HELMETS Part No.

Description

Size (in.)

For Use With

Shpg. Wt. (lbs.)

ADF Cartridge

4.33 x 3.54

Professional

0.2

WEH8LDCR ADF Cartridge

4.33 x 3.54

Light-Duty

0.2

—

Professional Series

0.1

Light-Duty

0.1

Auto Darkening Cartridge WEH8PCR

Inside Lens Cover WEHPCN

Inside Lens Cover, 2/pkg.

WEH8LCN

Inside Lens Cover, 2/pkg. 4.33 x 3.54

WEH8LDCR

Front Lens Cover WEH8LCF

Front Lens Cover, 2/pkg.

4.33 x 3.54 Professional Series, Light-Duty

0.1

Headgear Ratchet WEH8HR

Headgear Ratchet Assy.

—

Professional Series, Light-Duty

0.1

Helmet Shell WEH8PSR

Professional (Blue)

WEH8LDSR Light-Duty (Silver)

—

Professional

0.8

—

Light-Duty

0.8

—

Professional, Light-Duty

0.1

WEH8HR

Helmet Sweatband WEH8SB

Sweatband

HEAVY-DUTY WELDING HOSE REELS Durable all steel construction. Large L-shaped base with groove reinforcement providing stable support. Full flow survival design ensures the longest possible life. Multiposition guide arm permits wall, floor or ceiling mount.

Part No. RGA1465W

Hose Hose Maximum I.D. Length Pressure (PSI) (ft.) (in.) 1⁄4

www.westwardtools.ca

300

• • • •

Hose Outlet (in.) NPTF (M) 9⁄16"-18

UNF

Multi-position ratchet lock. High grade double O-ring seal design. With supporting bearing surfaces. Baked on powder coated finish.

Hose Reel Inlet (in.) NPTF (F) 9⁄16"-18

UNF

Length (in.)

Width (in.)

Height (in.)

Shpg. Wt. (lbs.)

20.7

9.8

23.0

57.2

301

2/9/10

9:51 AM

Page 302

WELDING LEATHER WELDING JACKETS Full 30" length provides complete leather protection. Split leather cowhide with reinforced seams. Features underarm and back vents for welders comfort. 100% polyester inner arm and shoulder lining for easy on/off. Brown colour.

Part No.

Description

Size

Shpg. Wt. (lbs.)

CDRWJL30BR-M

Full Jacket 30"

Medium

4.7

CDRWJL30BR-L

Full Jacket 30"

Large

5.0

CDRWJL30BR-XL

Full Jacket 30"

X-Large

5.5

CDRWJL30BR2XL

Full Jacket 30"

XX-Large

5.7

CDRWJL30BR3XL

Full Jacket 30"

XXX-Large

5.9

WELDERS CAPE SLEEVES Cover arms, shoulders and upper torso. Split leather cowhide construction. Brown colour.

Part No.

Description

Size

Shpg. Wt. (lbs.)

CDRWCSL-BR-M

Cape Sleeves

Medium

1.5

CDRWCSL-BR-L

Cape Sleeves

Large

1.6

CDRWCSL-BR-XL Cape Sleeves

X-Large

1.8

CDRWCSL-BR2XL Cape Sleeves

XX-Large

2.0

WELDING SLEEVES Secure with snaps at wrist and bicep with an adjustable strap. Priced and sold per pair. Brown colour.

Part No.

Description

CDRWSL18BR Welding Sleeves

Size

Shpg. Wt. (lbs.)

18" Length

1.5

BIB APRON Provides chest-to-knee protection. Split leather cowhide. Secured around the neck and waist with webbing and snap buckle. Brown colour.

Part No.

Description

CDRWAL-BR Leather Bib Apron

302

Size

Shpg. Wt. (lbs.)

24" x 36"

2.0

www.westwardtools.ca

2/9/10

9:52 AM

Page 303

WELDING

DETACHABLE BIB Split leather 1 piece. Select cowhide bib attaches to cape sleeves (sold separately) with 4 snaps. Secured around the waist with belt and snap buckle. Brown colour.

Part No.

Description

CDRWBDL-BR

Leather Detachable Bib

Size

Shpg. Wt. (lbs.)

19" x 20"

2.0

WELDING BIB OVERALLS Split leather cowhide construction offers excellent protection and durability. Bib style for ease of movement and welder comfort.

Part No.

Description

Size

Shpg. Wt. (lbs.)

CDRWBL-BR-M

Bib Overall

Medium

5.0

CDRWBL-BR-L

Bib Overall

Large

5.3

CDRWBL-BR-XL

Bib Overall

X-Large

5.5

CDRWBL-BR2XL

Bib Overall

XX-Large

6.0

WELDING WAIST APRON Split leather cowhide construction offers excellent protection and durability. 1 piece design offers lower body protection. Available in either 18" or 24" length.

Part No.

Size

Shpg. Wt. (lbs.)

CDRWAWL18BR Waist Apron

Description

18" Length

5.0

CDRWAWL24BR Waist Apron

24" Length

5.3

WELDING SPLIT LEG APRON Premium quality split leather cowhide construction offers excellent protection and durability. 1 piece waist style design offers lower body protection. Available in 24" x 36", 42" or 48" sizes.

Part No.

Description

Size

Shpg. Wt. (lbs.)

CDRWASLL36BR Split Leg Apron 24" x 36"

4.0

CDRWASLL42BR Split Leg Apron 24" x 42"

4.3

CDRWASLL48BR Split Leg Apron 24" x 48"

4.5

www.westwardtools.ca

303

2/9/10

9:53 AM

Page 304

SOLDERING MULTI-FUNCTION BUTANE HEAT/SOLDERING TOOL • • • • •

Piezo electric ignition system. Adjustable temperature. Temperature up to 450° C. Cap can be safely used as a stand. Easy and inexpensive to refill with standard butane gas. • 30 minute operation time at 80% flame.

Includes: storage case, soldering tips, 2.4 mm conical and chisel, hot knife tip, heat blower tip, deflector tip, soldering wire, 60/40 rosin core 1.0 mm diameter 15 g, sponge and wrench. • Functions as a soldering iron, heat blower and torch. • Wind-proof flame and water-proof ignition.

Part No.

Description

BTK8C

Shpg. Wt. (lbs.)

Multi Function Butane Heat/Soldering Kit

0.1

MULTI-FUNCTION BUTANE HEAT/SOLDERING TOOL • • • • •

Piezo electric ignition system. Adjustable temperature. Temperature up to 450° C. Self standing design. Easy and inexpensive to refill with standard butane gas. • 90 minute operation time at 80% flame.

Part No.

Description

Shpg. Wt. (lbs.)

BTK19C

Multi Function Butane Heat Soldering Kit

• Cap can be safely used as a stand. • Easy and inexpensive to refill with standard butane gas. • 20 minute operation time at medium heat.

BUTANE SOLDERING IRON • • • •

6.0

Windproof flame and waterproof ignition. Piezo electric ignition system. Adjustable temperature. Temperature range 200° C – 400° C (400° F – 750° F).

Part No.

Description

Run Time (min.)

Temperature Range (°F)

Shpg. Wt. (lbs.)

BT6S

Soldering Iron

400 - 750

3.5

MULTI-FUNCTION BUTANE HEAT/SOLDERING TOOL

BT19C

BT8C Multi-Function Butane Heat/Soldering Tool • Functions as a soldering iron, heat blower, and torch. • Wind-proof flame and waterproof ignition. • Piezo electric ignition system. • Adjustable temperature. • Temperature up to 450° C. • Cap can be safely used as a stand. • Easy and inexpensive to refill with standard butane gas. • 30 minute operation time at 80% flame.

Part No. Description

304

BT19C Multi-Function Butane Heat/Soldering Tool • Functions as a soldering iron, heat blower, and torch. • Wind-proof flame and waterproof ignition. • Piezo electric ignition system. • Adjustable temperature • Self-standing design. • Easy and inexpensive to refill with standard butane gas. • 90 minute operation time at 80% flame.

Run Time (min.)

Temperature Range (°C)

Shpg. Wt. (lbs.)

BT8C

Multi-Heat and Soldering Tool

450

4.0

BT19C

Multi-Heat and Soldering Tool

450

4.0

www.westwardtools.ca

W305-10.qxp

2/12/10

3:26 PM

Page 305

SAFETY TOOLS

Insulated Pliers . . . . . . . . . . 306-307 Insulated Screwdrivers. . . . . . . . . 308 Non-Sparking Wrenches. . . . . . . . 309 Non-Sparking Pliers. . . . . . . . . . . 310 Non-Sparking Screwdrivers . . . . . 311 Non-Sparking Sockets . . . . . . 312-314 Non-Sparking Scrapers . . . . . 317-319 Non-Sparking Punches . . . . . . . . . 319 Non-Sparking Hammers . . . . . 320-321 Titanium Tools . . . . . . . . . . . 322-323 Hand Protection . . . . . . . . . . 327-332 Knee Pads . . . . . . . . . . . . . . . . . 333 Protective Clothing . . . . . . . . 334-341 Traffic Safety . . . . . . . . . . . . 342-350 Head Protection . . . . . . . . . . . . . 351 Hearing Protection . . . . . . . . 352-353 Eye Protection . . . . . . . . . . . 354-357

2/8/10

3:46 PM

Page 306

INSULATED TOOLS INSULATED PLIER SET • Chrome vanadium drop forged induction hardened cutting edges. • Ergonomic dual molded handles provide comfort and a more positive grip. • 1,000 V certified to DIN EN60900. • Includes 8" long nose, linesman's and diagonal pliers as well as wire stripper in a pouch.

Part No.

Description

PK5E

5 Piece Set

Shpg. Wt. (lbs.) 2.5

Part No.

Length (in.)

Shpg. Wt. (lbs.)

PN6E

0.3

PN8E

0.4

INSULATED HIGH LEVERAGE LONG NOSE PLIERS • Chrome vanadium drop forged induction hardened cutting edges. • Ergonomic dual molded handles provide comfort and a more positive grip. • 1,000 V certified to DIN EN60900. • High leverage design provides greater cutting and gripping power than regular cutters.

Part No. PNH8E

Length (in.)

Shpg. Wt. (lbs.)

0.6

Part No. PLH7E

Length (in.)

Shpg. Wt. (lbs.)

0.5

Part No. PL8E

306

Length (in.)

Shpg. Wt. (lbs.)

0.8

www.westwardtools.ca

2/8/10

3:47 PM

Page 307

INSULATED TOOLS INSULATED DIAGONAL CUTTING PLIERS • Chrome vanadium drop forged induction hardened cutting edges. • Ergonomic dual molded handles provide comfort and a more positive grip. • 1,000 V certified to DIN EN60900.

Part No.

Length (in.)

Shpg. Wt. (lbs.)

PD6E

0.4

PD8E

0.6

Part No.

Length (in.)

Shpg. Wt. (lbs.)

PNB6E

0.3

PNB8E

0.4

INSULATED V-SHAPED WIRE STRIPPERS • Chrome vanadium drop forged induction hardened cutting edges. • Ergonomic dual molded handles provide comfort and a more positive grip. • 1,000 V certified to DIN EN60900. • Adjusting screw for setting depth.

Part No. PW6E

Length (in.)

Shpg. Wt. (lbs.)

0.4

12 PIECE INSULATED SCREWDRIVER SET • • • • •

Part No.

Description

SK12E

12 Piece Insulated Set

Shpg. Wt. (lbs.) 2.5

7 PIECE INSULATED SCREWDRIVER SET • • • • •

Part No.

Description

SK7E

7 Piece Insulated Set

www.westwardtools.ca

Shpg. Wt. (lbs.) 1.5

307

2/8/10

3:48 PM

Page 308

INSULATED TOOLS Westward insulated tools are approved to DIN EN60900 standards. Each tool is tested to 10,000 VAC. These insulated tools are impact, adhesions, flame retardancy, dielectric and indentation tested.

7 PIECE INSULATED TOOL KIT Includes 8" combination pliers; 8" long nose pliers; 8" diagonal pliers; 10" water pump pliers; 5⁄32 x 4" and 1⁄4 x 6" slotted screw drivers; and #2 x 4" Phillips screwdrivers. Ergonomic handles. Insulated screwdrivers minimize electrical hazards.

Part No.

Description

PKSK7E

7 Piece Kit

Shpg. Wt. (lbs.) 2.5

10 PIECE INSULATED TOOL KIT Includes 6" wire stripper; 8" combination pliers; 8" long nose, 8" diagonal, 10" water pump pliers; 7⁄32 x 5" and 1⁄4 x 6" slotted screwdrivers; #1 x 33⁄16", #2 x 4" and #3 x 6" Phillips screwdrivers. Ergonomic handles. Insulated screwdrivers minimize electrical hazards.

Part No.

Description

PKSK10E

10 Piece Kit

Shpg. Wt. (lbs.) 4.2

Westward non-sparking tools are manufactured from aluminum bronze or beryllium copper. All tools are drop forged and individually safety tested. These tools are corrosion resistant and non-magnetic. Non-sparking tools are designed for use in potentially combustible environments; such as, oil, gas, petrochemical, and transportation industries.

ALUMINUM BRONZE ADJUSTABLE WRENCHES

308

Part No.

Size (in.)

Shpg. Wt. (lbs.)

AW6NS

0.3

AW8NS

0.5

AW10NS

0.8

AW12NS

1.4

AW15NS

2.8

www.westwardtools.ca

2/8/10

3:49 PM

Page 309

NON-SPARKING TOOLS Part No.

Size (in.)

Shpg. Wt. (lbs.)

CW12NS

3⁄8

0.1

CW14NS

7⁄16

0.1

CW16NS

1⁄2

0.2

CW18NS

9⁄16

0.2

CW20NS

5⁄8

0.4

CW22NS

11⁄16

0.4

CW24NS

3⁄4

0.5

CW26NS

13⁄16

0.8

CW28NS

7⁄8

0.8

CW30NS

15⁄16

1.0

CW32NS

1.1

CW34NS

11⁄16

1.2

CW36NS

11⁄8

1.3

CW40NS

11⁄4

1.6

CW42NS

15⁄16

1.8

CW44NS

13⁄8

2.2

CW46NS

17⁄16

2.6

CW48NS

11⁄2

2.9

Part No.

Size (mm)

CM8NS

120

0.1

CM9NS

130

0.1

CM10NS

140

0.1

CM11NS

150

0.1

CM12NS

160

0.2

CM13NS

170

0.2

CM14NS

180

0.3

CM15NS

190

0.3

CM16NS

200

0.3

CM17NS

210

0.4

CM18NS

220

0.4

ALUMINUM BRONZE SAE COMBINATION WRENCHES

Length (mm) Shpg. Wt. (lbs.)

CM19NS

230

0.5

CM20NS

240

0.8

CM21NS

252

0.8

CM22NS

262

0.8

CM24NS

282

1.0

CM25NS

330

1.0

CM26NS

330

1.1

CM27NS

330

1.2

CM28NS

320

1.2

CM29NS

330

1.4

CM30NS

340

1.6

CM32NS

380

1.8

CM36NS

460

2.2

www.westwardtools.ca

ALUMINUM BRONZE METRIC COMBINATION WRENCHES

309

2/8/10

3:50 PM

Page 310

NON-SPARKING TOOLS Westward non-sparking tools are manufactured from aluminum bronze or beryllium copper. All tools are drop forged and individually safety tested. These tools are corrosion resistant and non-magnetic. Non-sparking tools are designed for use in potentially combustible environments; such as, oil, gas, petrochemical, and transportation industries.

ALUMINUM BRONZE SLIP JOINT PLIERS Part No. PS8NS

Size (in.)

Shpg. Wt. (lbs.)

0.5

ALUMINUM BRONZE LINESMAN PLIERS Size (in.)

Shpg. Wt. (lbs.)

PL6NS

Part No.

0.5

PL8NS

0.8

BERYLLIUM COPPER LONG NOSE PLIERS Part No. PN7NS

Size (in.)

Shpg. Wt. (lbs.)

0.4

BERYLLIUM COPPER DIAGONAL PLIERS Part No. PD6NS

Size (in.)

Shpg. Wt. (lbs.)

0.6

BERYLLIUM COPPER HEAVY-DUTY DIAGONAL PLIERS Part No. PD7NS

310

Size (in.)

Shpg. Wt. (lbs.)

0.4

www.westwardtools.ca

2/8/10

3:51 PM

Page 311

NON-SPARKING TOOLS ALUMINUM BRONZE WATER PUMP PLIERS Part No.

Size (in.)

Shpg. Wt. (lbs.)

PG10NS

0.7

PG12NS

1.4

BERYLLIUM COPPER PHILLIPS SCREWDRIVERS Part No.

Size

Shaft Length (in.)

Shpg. Wt. (lbs.)

SP13NS

0.2

SP24NS

0.2

SP36NS

0.4

BERYLLIUM COPPER SLOT SCREWDRIVERS Part No.

Size (in.)

Shaft Length (in.)

Shpg. Wt. (lbs.)

SS53NS

5⁄32

0.1

SS44NS

1⁄4

0.2

SS56NS

5⁄16

0.3

ALUMINUM BRONZE PIPE WRENCHES Part No.

Size (in.)

Shpg. Wt. (lbs.)

PW14NS

3.4

PW18NS

5.7

PW24NS

9.0

ALUMINUM BRONZE 1⁄2" DRIVE RATCHET Part No.

Description

SA12NS

10" Ratchet

1.2

SA12NSRK

Repair Kit

0.2

www.westwardtools.ca

Shpg. Wt. (lbs.)

311

2/8/10

3:52 PM

Page 312

NON-SPARKING TOOLS ALUMINUM BRONZE 1⁄2" DRIVE SLIDING “T” HANDLE Part No. SA1203NS

Length (in.)

Shpg. Wt. (lbs.)

12.6

1.0

ALUMINUM BRONZE 1⁄2" DRIVE EXTENSIONS Part No.

Length (in.)

Shpg. Wt. (lbs.)

SA124NS

0.4

SA128NS

0.8

SA1210NS

1.1

ALUMINUM BRONZE 1⁄2" DRIVE FLEX HANDLE Part No. SA1201NS

Length (in.)

Shpg. Wt. (lbs.)

1.9

ALUMINUM BRONZE 1⁄2" DRIVE 12 POINT SAE SOCKETS Part No.

Size (in.)

Shpg. Wt. (lbs.)

5⁄16

0.2

SS122ANS

3⁄8

0.2

SS122BNS

7⁄16

0.2

SS122CNS

1⁄2

0.2

SS122DNS

9⁄16

0.2

SS122FNS

5⁄8

0.2

SS122HNS

11⁄16

0.2

SS122INS

3⁄4

0.2

SS122KNS

13⁄16

0.3

SS122LNS

7⁄8

0.3

15⁄16

0.3

SS122NNS

0.4

SS122ONS

11⁄16

0.4

SS122PNS

11⁄8

0.4

SS122QNS

13⁄16

0.4

SS122RNS

11⁄4

0.5

SS1224NS

SS122MNS

312

www.westwardtools.ca

2/8/10

3:53 PM

Page 313

NON-SPARKING TOOLS ALUMINUM BRONZE 1⁄2" DRIVE 12 POINT METRIC SOCKETS Part No.

Size (mm)

Shpg. Wt. (lbs.)

MS1207NS

0.2

MS1208NS

0.2

MS1209NS

0.2

MS1210NS

0.2

MS1211NS

0.2

MS1212NS

0.2

MS1213NS

0.2

MS1214NS

0.2

MS1215NS

0.2

MS1216NS

0.2

MS1217NS

0.2

MS1218NS

0.2

MS1219NS

0.2

MS1220NS

0.3

MS1221NS

0.3

MS1222NS

0.3

MS1223NS

0.3

MS1224NS

0.3

MS1226NS

0.4

MS1227NS

0.4

MS1228NS

0.4

MS1230NS

0.5

MS1232NS

0.5

ALUMINUM BRONZE 3⁄4" DRIVE RATCHET Part No.

Description

Shpg. Wt. (lbs.)

SA34NS

15" Ratchet

2.8

SA34NSRK

Repair Kit

0.3

ALUMINUM BRONZE 3⁄4" DRIVE FLEX BAR Part No. SA3415NS

Length (in.)

Shpg. Wt. (lbs.)

2.3

ALUMINUM BRONZE 3⁄4" DRIVE SLIDING “T” HANDLE Part No. SA3418NS

Length (in.)

Shpg. Wt. (lbs.)

3.1

www.westwardtools.ca

313

2/8/10

3:54 PM

Page 314

NON-SPARKING TOOLS ALUMINUM BRONZE 3⁄4" DRIVE UNIVERSAL JOINT Part No.

Size (in.)

Shpg. Wt. (lbs.)

3⁄4

1.2

SA3402NS

ALUMINUM BRONZE 3⁄4" DRIVE EXTENSIONS Part No.

Length (in.)

Shpg. Wt. (lbs.)

SA344NS

0.5

SA348NS

0.9

SA3410NS

1.3

ALUMINUM BRONZE SOCKET DRIVE ADAPTERS Part No.

Description

SA1234NS

1⁄2"

0.4

SA3412NS

3⁄4"

F x 1⁄2" M

0.4

3⁄4"

Shpg. Wt. (lbs.)

ALUMINUM BRONZE 3⁄4" DRIVE SAE SOCKETS Part No.

314

Size (in.)

Shpg. Wt. (lbs.)

SS342NNS

0.6

SS342ONS

11⁄16

0.6

SS342PNS

11⁄8

0.7

SS342QNS

13⁄16

0.7

SS342RNS

11⁄4

0.8

SS342SNS

15⁄16

0.9

SS342TNS

13⁄8

0.9

SS342UNS

17⁄16

1.0

SS342VNS

11⁄2

1.0

SS342XNS

15⁄8

1.3

SS342YNS

111⁄16

1.4

SS342ZNS

13⁄4

1.5

SS342ZANS

113⁄16

1.7

SS342ZBNS

17⁄8

1.7

SS342ZCNS

2.2

www.westwardtools.ca

2/8/10

3:55 PM

Page 315

NON-SPARKING TOOLS BERYLLIUM COPPER SAE HEX KEYS Part No.

Size (in.)

Shpg. Wt. (lbs.)

HK532NS

5⁄32

0.1

HK316NS

3⁄16

0.1

HK732NS

7⁄32

0.1

HK14NS

1⁄4

0.1

HK516NS

5⁄16

0.2

HK38NS

3⁄8

0.3

HK716NS

7⁄16

0.4

HK12NS

1⁄2

0.4

HK916NS

9⁄16

0.7

HK58NS

5⁄8

1.1

HK34NS

3⁄4

1.7

BERYLLIUM COPPER METRIC HEX KEYS Part No.

Size (mm)

Shpg. Wt. (lbs.)

MHK4NS

0.1

MHK5NS

0.1

5.5

0.1

MHK6NS

0.1

MHK7NS

0.1

MHK8NS

0.2

MHK9NS

0.2

MHK10NS

0.3

MHK12NS

0.4

MHK14NS

0.7

MHK17NS

1.1

MHK19NS

1.5

MHK55NS

BERYLLIUM COPPER HALF ROUND FILE Part No. FHRB8NS

Length (in.)

Shpg. Wt. (lbs.)

0.6

BERYLLIUM COPPER ROUND FILES Part No.

Length (in.)

Shpg. Wt. (lbs.)

FRB8NS

0.8

FRB10NS

0.9

www.westwardtools.ca

315

2/8/10

3:56 PM

Page 316

NON-SPARKING TOOLS BERYLLIUM COPPER FLAT CHISELS Part No.

Length (in.)

Shpg. Wt. (lbs.)

FFB8NS

0.9

FFB10NS

1.2

FFB12NS

1.6

BERYLLIUM COPPER SCRIBERS Part No.

Length (in.)

Shpg. Wt. (lbs.)

A19-7NS

0.1

A19-10NS

0.1

ALUMINUM BRONZE TWEEZERS Part No.

Length (in.)

Shpg. Wt. (lbs.)

TZ6PNS

0.1

BERYLLIUM COPPER SHEARS Part No.

Length (in.)

Shpg. Wt. (lbs.)

SHD9NS

91⁄2

1.2

BERYLLIUM COPPER SCISSORS

316

Part No.

Length (in.)

Shpg. Wt. (lbs.)

SHD8NS

0.7

www.westwardtools.ca

2/8/10

3:57 PM

Page 317

NON-SPARKING TOOLS ALUMINUM BRONZE HACKSAW FRAME & BERYLLIUM COPPER HACKSAW BLADE Part No.

Description

Shpg. Wt. (lbs.)

HS1NS

12" Frame

1.2

HC12NS

12" Blade

0.1

ALUMINUM BRONZE C-CLAMPS Part No.

Size (in.)

Shpg. Wt. (lbs.)

4003NS

4.9

4006NS

7.7

ALUMINUM BRONZE ROUND POINT SHOVEL Part No. SHR10NS

Blade Size (in.)

Shpg. Wt. (lbs.)

10 x 12

3.8

ALUMINUM BRONZE SQUARE POINT SCOOP SHOVEL Part No.

Blade Size (in.)

Shpg. Wt. (lbs.)

SHF10NS

10 x 12

2.7

BERYLLIUM COPPER EDGING SPADE Part No.

Blade Size (in.)

Shpg. Wt. (lbs.)

SHE8NS

12 x 8

3.8

www.westwardtools.ca

317

2/8/10

4:04 PM

Page 318

NON-SPARKING TOOLS

ALUMINUM BRONZE KNIFE Part No.

Size (in.)

Blade Length (in.)

Shpg. Wt. (lbs.)

KL10NS

0.2

ALUMINUM BRONZE PUTTY KNIVES Part No.

Size (in.)

Length (in.)

Shpg. Wt. (lbs.)

PK114NS

11⁄4

0.2

PK2NS

0.2

PK3NS

0.3

PK4NS

0.3

Length (in.)

Shpg. Wt. (lbs.)

ALUMINUM BRONZE DECK SCRAPER Part No.

Size (in.)

DSC3NS

0.6

DSC5NS

91⁄4

1.9

ALUMINUM BRONZE SCRAPERS Part No.

Width (in.)

Length (in.)

Shpg. Wt. (lbs.)

DSL4NS

2.2

DSL6NS

5.2

ALUMINUM BRONZE HOE SCRAPER

318

Part No.

Width (in.)

Length (in.)

Shpg. Wt. (lbs.)

HSC3NS

41⁄2

0.5

www.westwardtools.ca

2/8/10

4:05 PM

Page 319

NON-SPARKING TOOLS

ALUMINUM BRONZE SCRAPER WITH ACK Part No.

Length (in.)

Shpg. Wt. (lbs.)

DSP18NS

2.7

BERYLLIUM COPPER PIN PUNCHES Part No.

Length (in.)

Tip Size (in.)

Stock Size (in.)

Shpg. Wt. (lbs.)

WC28NS

41⁄4

1⁄8

3⁄8

0.2

WC28ANS

43⁄4

3⁄16

3⁄8

0.3

WC30NS

51⁄2

1⁄4

1⁄2

0.4

5⁄16

19⁄32

0.7

WC84NS

BERYLLIUM COPPER FLAT FILES Size (in.)

Stock Size (in.)

Length (in.)

Shpg. Wt. (lbs.)

WC5NS

7⁄8

1⁄2

0.8

WC10NS

7⁄8

1⁄2

0.9

15⁄16

1⁄2

1.4

1⁄2

2.3

Part No.

WC6NS WC7NS

BERYLLIUM COPPER CENTER PUNCH Part No.

Length (in.)

Stock Size (in.)

Shpg. Wt. (lbs.)

WC34NS

3⁄8

0.2

BERYLLIUM COPPER CROSS CUTTING CHISEL Part No. WC18ANS

Length (in.)

Shpg. Wt. (lbs.)

0.5

www.westwardtools.ca

319

2/8/10

4:06 PM

Page 320

NON-SPARKING TOOLS BRASS DRIFT PUNCH • Non-sparking brass drift punch. • Soft brass absorbs impact and reduces work damage.

Part No. DPB10

Size (in.)

Length (in.)

Shpg. Wt. (lbs.)

0.6

TAPERED BRASS PUNCH • Non-sparking brass taper punch. • Soft brass absorbs impact and reduces work damage.

Part No. A21

Size (in.)

Shpg. Wt. (lbs.)

5⁄8

0.5

BRASS HAMMER KIT • Non-sparking brass head is non-marring. • Soft brass absorbs impact and reduces work damage. • Set includes 2 lb. hammer, 5⁄8" taper punch and 3⁄4" drift punch.

Part No.

Description

HBK3

Hammer Kit

Shpg. Wt. (lbs.) 3.1

ALUMINUM BRONZE BUNG WRENCHES BW385NS

Part No.

Length (in.)

Shpg. Wt. (lbs.)

BW305NS

121⁄4

1.5

BW385NS

151⁄8

3.5

BW305NS

ALUMINUM BRONZE CRATE OPENER Part No. YS1180NS

320

Length (in.)

Shpg. Wt. (lbs.)

91⁄2

1.1

www.westwardtools.ca

2/8/10

4:07 PM

Page 321

NON-SPARKING TOOLS

ALUMINUM BRONZE MACHINST'S HAMMER Part No.

Size (oz.)

Shpg. Wt. (lbs.)

HM2NS

2.0

ALUMINUM BRONZE SLEDGE HAMMERS Part No.

Head Weight (lbs.)

Shpg. Wt. (lbs.)

HS6NS

8.0

HS10NS

11.0

HS14NS

16.0

ALUMINUM BRONZE CLAW HAMMER Westward non-sparking tools are manufactured from aluminum bronze or beryllium copper. All tools are drop forged and individually safety tested. These tools are corrosion resistant and non-magnetic. Non-sparking tools are designed for use in potentially combustible environments; such as, oil, gas, petrochemical, and transportation industries.

Part No.

Size (oz.)

Shpg. Wt. (lbs.)

9016NS

1.6

BRASS HAMMER • Non-sparking brass head is non-marring. • Soft brass absorbs impact and reduces work damage. • Varnished hickory handles.

Part No. HB2

Size

Overall Length (in.)

Shpg. Wt. (lbs.)

2.0 lbs.

2.2

BERYLLIUM COPPER 4 ROW SCRATCH BRUSH Part No. BRH14NS

Length (in.)

Shpg. Wt. (lbs.)

0.5

www.westwardtools.ca

321

2/8/10

4:08 PM

Page 322

TITANIUM TOOLS TITANIUM HAND TOOLS Titanium is approximately 60% less dense than steel, Titanium produces tools that are nearly half the weight of their metal counterparts. Yet it is also extraordinarily strong, with a greater strength-to-weight ratio than stainless and annealed steel or aluminum. Titanium also offers superior, high heat transfer efficiency. Because it contains no iron (non-ferrous), Titanium is non-magnetic. This is crucial for sophisticated aerospace, bio-medical and diagnostic imaging machines that rely on powerful magnets: MRI, NMR Magnets, Bio-Med equipment, PET-CT scanners and increasingly popular High Tesla Magnets. Non-ferrous Titanium tools are also highly corrosion resistant, making them ideal for applications involving acids and alkalis, and for use in natural, saltwater and marine environments.

TITANIUM ADJUSTABLE WRENCH Part No.

Size (in.)

Shpg. Wt. (lbs.)

AW10TT

0.2

TITANIUM SAE COMBINATION WRENCHES Part No.

Size (in.)

Shpg. Wt. (lbs.)

CW10TT

5⁄16

0.1

CW12TT

3⁄8

0.1

CW14TT

7⁄16

0.1

CW16TT

1⁄2

0.1

CW18TT

9⁄16

0.2

CW20TT

5⁄8

0.2

CW22TT

11⁄16

0.2

CW24TT

3⁄4

0.3

TITANIUM METRIC COMBINATION WRENCHES Part No.

322

Size (mm)

Shpg. Wt. (lbs.)

CM6TT

0.1

CM7TT

0.1

CM9TT

0.1

CM10TT

0.1

CM11TT

0.2

CM12TT

0.2

CM13TT

0.2

CM14TT

0.2

CM17TT

0.2

CM19TT

0.3

www.westwardtools.ca

2/8/10

4:09 PM

Page 323

TITANIUM TOOLS

TITANIUM BALL PEIN HAMMER Part No.

Size (oz.)

Shpg. Wt. (lbs.)

7016TT

1.3

Length (in.)

Shpg. Wt. (lbs.)

0.3

TITANIUM SIDE CUTTERS Part No. PD6TT

TITANIUM LONG NOSE PLIERS Part No.

Length (in.)

Shpg. Wt. (lbs.)

0.4

PN7TT

TITANIUM SLIP JOINT PLIERS Part No.

Length (in.)

Shpg. Wt. (lbs.)

0.4

PS8TT

TITANIUM SCREWDRIVERS Part No.

Size

Blade Length (in.)

Shpg. Wt. (lbs.)

SP13TT

#1 Phillips

0.1

SP26TT

#2 Phillips

0.2

SP36TT

#3 Phillips

0.2

SS24TT

1⁄8"

Slot

0.2

SS34TT

3⁄16"

Slot

0.2

SS45TT

1⁄4"

Slot

0.2

SS56TT

5⁄16"

Slot

0.3

www.westwardtools.ca

323

W324-10.qxp

2/12/10

2:09 PM

Page 324

FLOOR SIGNS & BARRIERS

FLOOR SIGNS • Featuring black safety message on all sides. • Bilingual. • 27".

CDRFS27CA

CDRFS27CL

CDRFS27WF

Part No.

Description

Shpg. Wt. (lbs.)

CDRFS27CA

“Caution” Floor Sign

3.0

CDRFS27CL

“Closed” Floor Sign

3.0

CDRFS27WF

“Wet Floor” Sign

3.0

SNOW FENCE • • • •

Engineered to control driving snow and sand. Oriented. 50/50 mesh design provides maximum efficiency. 4' x 50'.

Part No.

Description

CDRSF4850

Snow Fence 4' x 50'

Shpg. Wt. (lbs.) 15.0

MEDIUM SECURITY STAINLESS STEEL PADLOCKS Tough, high quality padlocks that are resistant to salt water, acid and other corrosive compounds. Ideal for medium security applications in severe weather and environmental conditions.

Part No.

Body Width (in.)

Key Type

Shpg. Wt. (lbs.)

LP40S

11⁄2

Different

0.5

LP50S

Different

0.8

KEY CABINET • • • •

324

Solid steel construction. Power coated finish. Secure locking system. Safe and easy-to-use.

Part No.

Description

SEK48

Key Cabinet

Size (in.)

Shpg. Wt. (lbs.)

10 x 7.2 x 3.2

3.3

www.westwardtools.ca

W325-10.qxp

2/12/10

2:11 PM

Page 325

SAFES

ELECTRONIC DRAWER SAFE • • • • •

Great for keeping smaller valuables safe and out of sight. One way lock bolt (0.12" diameter). 4 anchor holes on bottom. 0.2" thick steel plate door. 0.12" thick steel plate body.

Part No. Description SED300

Electronic Drawer Safe

Size (in.)

Shpg. Wt. (lbs.)

6.4 x 18 x 14

30.8

FIRE PROOF SAFE • Heavy-duty vault style door and multi-walled body construction. • Multi-walled body containing special fireproof material (foaming concrete). • Electronic locking system, featuring a high security electronic magnet drive lock with clear LED display showing the function and battery status. • Equipped with emergency key lock. • Three way locking bolts. • Extra battery compartment included. • Powder coated finish. • Requires 4 AA batteries (not included). • Adjustable and removable shelf. • 1 hour fire protection in accordance with UL certification.

Part No.

Description

Size (in.)

Shpg. Wt. (lbs.)

SEF400

Fire Proof Safe

13.2 x 16.8 x 15.4

176.0

EXECUTIVE SAFE • • • • •

Suitable for use in police stations, and security firms. Removable and adjustable shelves. 3 way locking (0.88" diameter) bolts. 2 anchor holes for wall mounting. Powder coated finish.

Part No.

Description

Size (in.)

Shpg. Wt. (lbs.)

SET1450

Tall Safe

6 x 14 x 14

154.0

www.westwardtools.ca

325

W326-10.qxp

2/12/10

2:12 PM

Page 326

SAFES

CARD LOCK SAFE • Solid steel construction offers great burglary protection. • High security electronic motorized locking system, featuring a high security electronic magnet drive lock with clear LED display showing the function and battery status. • Equipped with emergency key lock. • Keypad locks for 5 minutes after 3 unsuccessful attempts to open. • One way locking bolt (0.88" diameter). • Anchor holes on the back and bottom for wall or floor mounting. • Powder coated finish. • Requires 4 AA batteries (not included).

Part No.

Description

Size (in.)

Shpg. Wt. (lbs.)

SEC350

Card Lock Safe

10 x 14 x 10

28.6

COMPACT ELECTRONIC SAFE • • • •

Solid steel construction offers great burglary protection. High security electronic locking system. LED display. Keypad locks for 5 minutes after 3 unsuccessful attempts to open. • One way locking bolt (0.88" diameter). • Anchor holes on the back and bottom for wall or floor mounting. • Powder coat finish.

Part No.

Description

Size (in.)

SES350

Compact Electronic Safe 10 x 14 x 10

Shpg. Wt. (lbs.) 24.2

ELECTRONIC SAFE • Solid steel construction offers great burglary protection. • High security electronic locking system. • Keypad locks for 5 minutes after 3 unsuccessful attempts to open. • One way locking bolt (0.8" diameter). • Anchor holes on the back and bottom for wall or floor mounting. • Powder coated finish.

326

Part No.

Description

Size (in.)

Shpg. Wt. (lbs.)

SEE310

Electronic Safe

8 x 12.4 x 8

18.2

www.westwardtools.ca

2/8/10

4:14 PM

Page 327

HAND PROTECTION GENERAL PURPOSE Breathable poly knit/cotton back gloves, palm coated with a textured rubber coating. Excellent grip in wet and dry applications. Resistance to abrasion, punctures and cuts.

Part No.

Shpg. Size Wt. (lbs.)

Description

CDR8844-7 Gray Poly/Cotton Knit with Black Textured Rubber Palm

0.2

CDR8844-8 Gray Poly/Cotton Knit with Black Textured Rubber Palm

0.2

CDR8844-9 Gray Poly/Cotton Knit with Black Textured Rubber Palm

0.2

CDR8844-10 Gray Poly/Cotton Knit with Black Textured Rubber Palm

0.2

RED HI-VIZ Part No.

Shpg. Size Wt. (lbs.)

Description

CDR8845-7 Hi-Viz Red Poly/Cotton with Black Textured Rubber Palm

0.2

CDR8845-8 Hi-Viz Red Poly/Cotton with Black Textured Rubber Palm

0.2

CDR8845-9 Hi-Viz Red Poly/Cotton with Black Textured Rubber Palm

0.2

CDR8845-10 Hi-Viz Red Poly/Cotton with Black Textured Rubber Palm

0.2

HI-VIZ GREEN Part No.

Shpg. Size Wt. (lbs.)

Description

CDR8846-7 Hi-Viz Green Poly/Cotton with Black Textured Rubber Palm

0.2

CDR8846-8 Hi-Viz Green Poly/Cotton with Black Textured Rubber Palm

0.2

CDR8846-9 Hi-Viz Green Poly/Cotton with Black Textured Rubber Palm

0.2

CDR8846-10 Hi-Viz Green Poly/Cotton with Black Textured Rubber Palm

0.2

NITRILE DIPPED SEAMLESS KNIT NYLON GLOVES Nitrile dipped knit nylon glove. • Gray nitrile dipped palm and fingers. • Seamless nylon knit liner. • Knit wrist.

Part No.

Description

Size

Shpg. Wt. (lbs.)

CDRGKP1GP7

Dark Gray Nylon Liner, Gray Polyurethane Coated Palm

0.1

CDRGKP1GP8

Dark Gray Nylon Liner, Gray Polyurethane Coated Palm

0.1

CDRGKP1GP9

Dark Gray Nylon Liner, Gray Polyurethane Coated Palm

0.1

CDRGKP1GP10 Dark Gray Nylon Liner, Gray Polyurethane Coated Palm

0.1

www.westwardtools.ca

327

2/8/10

4:15 PM

Page 328

HAND PROTECTION INSULATED STRING KNIT Black textured rubber palm insulated work glove. Black rubber on a seamless, thick poly/cotton knit glove. Excellent insulation properties as well as wet and dry grip applications and abrasion resistance.

Shpg. Size Wt. (lbs.)

Part No.

Description

CDR5588-7

Black Thermal Glove, with Black Rubber Coated Textured Palm

0.2

CDR5588-8

Black Thermal Glove, with Black Rubber Coated Textured Palm

0.2

CDR5588-9

Black Thermal Glove, with Black Rubber Coated Textured Palm

0.2

CDR5588-10 Black Thermal Glove, with Black Rubber Coated Textured Palm

0.2

GREEN HI-VIZ Shpg. Size Wt. (lbs.)

Part No.

Description

CDR5590-7

Green Thermal Glove, with Black Rubber Coated Textured Palm

0.2

CDR5590-8

Green Thermal Glove, with Black Rubber Coated Textured Palm

0.2

CDR5590-9

Green Thermal Glove, with Black Rubber Coated Textured Palm

0.2

CDR5590-10

Green Thermal Glove, with Black Rubber Coated Textured Palm

0.2

RED HI-VIZ Shpg. Size Wt. (lbs.)

Part No.

Description

CDR5589-7

Red Thermal Glove, with Black Rubber Coated Textured Palm

0.2

CDR5589-8

Red Thermal Glove, with Black Rubber Coated Textured Palm

0.2

CDR5589-9

Red Thermal Glove, with Black Rubber Coated Textured Palm

0.2

CDR5589-10

Red Thermal Glove, with Black Rubber Coated Textured Palm

0.2

HI-VIZ SYNTHETIC SEAMLESS KNIT GLOVES Hi-viz synthetic glove with latex palm coating. • Blue crinkle finish latex palm and fingers. • Elastic knit wrist. • Seamless knit design.

328

Shpg. Wt. Size (lbs.)

Part No.

Description

CDRGKL1BLP7

Glove, Hi-Viz Acrylic Thermal Liner with Natural Rubber Coating

0.1

CDRGKL1BLP8

Glove, Hi-Viz Acrylic Thermal Liner with Natural Rubber Coating

0.1

CDRGKL1BLP9

Glove, Hi-Viz Acrylic Thermal Liner with Natural Rubber Coating

0.1

CDRGKL1BLP10 Glove, Hi-Viz Acrylic Thermal Liner with Natural Rubber Coating

0.1

www.westwardtools.ca

2/8/10

4:16 PM

Page 329

HAND PROTECTION GKN2BLP SERIES Nitrile coated knit nylon glove. • Blue nitrile coated palm and fingers. • Knit nylon liner. • Excellent abrasion resistance.

Part No.

Description

CDRGKN2BLP6

Seamless White Nylon Liner, Blue Nitrile Coated Palm

Size Shpg. Wt. (lbs.) 6

0.1

CDRGKN2BLP7

Seamless White Nylon Liner, Blue Nitrile Coated Palm

0.1

CDRGKN2BLP8

Seamless White Nylon Liner, Blue Nitrile Coated Palm

0.1

CDRGKN2BLP9

Seamless White Nylon Liner, Blue Nitrile Coated Palm

0.1

CDRGKN2BLP10 Seamless White Nylon Liner, Blue Nitrile Coated Palm

0.1

GKN1GP SERIES Polyurethane coated seamless. • Super lightweight. • PU coated palm and fingers for strength and abrasion resistance. • Latex and silicone free.

Part No.

Description

CDRGKN1GP6

Gray Foam Nitrile Palm Coated, White Nylon Liner

Size Shpg. Wt. (lbs.) 6

0.1

CDRGKN1GP7

Gray Foam Nitrile Palm Coated, White Nylon Liner

0.1

CDRGKN1GP8

Gray Foam Nitrile Palm Coated, White Nylon Liner

0.1

CDRGKN1GP9

Gray Foam Nitrile Palm Coated, White Nylon Liner

0.1

CDRGKN1GP10 Gray Foam Nitrile Palm Coated, White Nylon Liner

0.1

CDRGKN1GP11 Gray Foam Nitrile Palm Coated, White Nylon Liner

0.1

NITRILE DIPPED SEAMLESS NYLON GLOVE Nitrile dipped knit nylon glove. • Black nitrile dipped palm and fingers. • Seamless nylon knit liner. • Knit wrist.

Part No.

Description

Size

Shpg. Wt. (lbs.)

CDRGKN2BP6 CDRGKN2BP7

Glove, Black Nylon Knit with Black Nitrile Palm

0.1

Glove, Black Nylon Knit with Black Nitrile Palm

0.1

CDRGKN2BP8

Glove, Black Nylon Knit with Black Nitrile Palm

0.1

CDRGKN2BP9

Glove, Black Nylon Knit with Black Nitrile Palm

0.1

CDRGKN2BP10 Glove, Black Nylon Knit with Black Nitrile Palm

0.1

CDRGKN2BP11 Glove, Black Nylon Knit with Black Nitrile Palm

0.1

CDRGKN2BP12 Glove, Black Nylon Knit with Black Nitrile Palm

0.1

FOAM NITRILE COATED SEAMLESS KNIT NYLON GLOVE Foam nitrile coated knit nylon glove. • Gray full foam nitrile coating. • Seamless nylon knit liner. • Good wet and dry drip.

Part No.

Description

CDRGKN3GF6

Size

Shpg. Wt. (lbs.)

CDRGKN3GF7

Glove, Fully Coated, Dark Gray Nitrile Foam

0.1

Glove, Fully Coated, Dark Gray Nitrile Foam

0.1

CDRGKN3GF8

Glove, Fully Coated, Dark Gray Nitrile Foam

0.1

CDRGKN3GF9

Glove, Fully Coated, Dark Gray Nitrile Foam

0.1

CDRGKN3GF10

Glove, Fully Coated, Dark Gray Nitrile Foam

0.1

www.westwardtools.ca

329

2/8/10

4:17 PM

Page 330

HAND PROTECTION LEATHER PERFORMANCE WORK GLOVE Goatskin leather palm with black spandex meshback for comfort. Keystone thumb and slip on elastic wrist with velcro tab closure for a more comfortable fit.

Part No. CDRGP7K-SM CDRGP7K-MED CDRGP7K-LGE

Size

Shpg. Wt. (lbs.)

Small

0.3

Medium

0.3

Large

0.3

CDRGP7K-XL

X-Large

0.3

CDRGP7K-XXL

XX-Large

0.3

LEATHER PERFORMANCE WORK GLOVE WITH PVC GRIP Goatskin leather palm with anti-slip grip, neoprene padded knuckle, black spandex mesh back for comfort and a slip on elastic wrist with velcro tab closure for a more comfortable fit. Reflective strip on the back of the hand for added visibility.

Part No.

Size

Shpg. Wt. (lbs.)

CDRGP10PG-SM

Small

0.3

Medium

0.3

CDRGP10PG-MED CDRGP10PG-LGE

Large

0.3

CDRGP10PG-XL

X-Large

0.3

CDRGP10PG-XXL

XX-Large

0.3

LEATHER PERFORMANCE WORK GLOVE WITH DOUBLE LAYERED PADDED PALM Goatskin double layered padded leather palm for durability with neoprene padded knuckle, black spandex mesh back for comfort and a slip on elastic wrist with velcro tab closure for a more comfortable fit.

Part No.

Size

Shpg. Wt. (lbs.)

CDRGP14DG-SM

Small

0.3

CDRGP14DG-MED

Medium

0.3

CDRGP14DG-LGE

Large

0.3

CDRGP14DG-XL

X-Large

0.3

CDRGP14DG-XXL

XX-Large

0.3

DYNEEMA® NINJA MAX • • • •

Resistance to not just cut, but abrasion and chemicals, as well. Bi-polymer coated palm for excellent wet or dry grip. Cut level resistance CE5. Abrasion resistance level CE4.

Part No.

Size

Shpg. Wt. (lbs.)

GLM5DS

Small

0.2

GLM5DM

Medium

0.2

GLM5DL

Large

0.2

X-Large

0.2

GLM5DXL

330

www.westwardtools.ca

2/8/10

4:18 PM

Page 331

HAND PROTECTION CARBONX® GLOVE • Non-flammable, non-melting. • CarbonX® fabric provides best available protection against flame and heat. • Does not melt or shrink (good to 2,800° F). • Flame resistant lining. • Pittards® FIRE BLOC™ leather palm for durability. • Sewn with black Kevlar® thread. • Padded knuckle protection. • Elastic wrist with hook and loop closure.

Part No.

Size

GLM1CM

Medium

0.3

GLM1CL

Large

0.3

X-Large

0.3

GLM1CXL

Shpg. Wt. (lbs.)

PERFORMANCE GLOVES • • • •

Neoprene padded knuckle. Black spandex mesh back for added comfort. Double layer padded synthetic leather palm for durability. Slip on wrist with rubberized velcro tab closure.

Part No.

Size

Shpg. Wt. (lbs.)

GLM3S

Small

0.3

GLM3M

Medium

0.3

GLM3L

Large

0.3

X-Large

0.3

GLM3XL

PERFORMANCE GLOVE WITH KNUCKLE PROTECTION • • • •

High impact knuckle protector. Black spandex mesh back for added comfort. Double layered synthetic palm and two fingers for durability. Slip on wrist style with rubberized velcro closure.

Part No.

Size

Shpg. Wt. (lbs.)

GLM2KS

Small

0.3

GLM2KM

Medium

0.3

GLM2KL

Large

0.3

X-Large

0.3

GLM2KXL

SYNTHETIC PERFORMANCE GLOVE • • • •

Seamless nylon knit. Hi-viz orange. Bi-polymer coated palm for wet/dry grip applications. Knit wrist with hook and loop closure.

Part No.

Size

Shpg. Wt. (lbs.)

GLM4VS

Small

0.2

GLM4VM

Medium

0.2

GLM4VL

Large

0.2

X-Large

0.2

GLM4VXL

www.westwardtools.ca

331

2/8/10

4:19 PM

Page 332

HAND PROTECTION CUT RESISTANT PERFORMANCE GLOVES Cut-resistant HPT dipped palm glove. • Rough dipped HPT coating for great grip,

abrasion and water resistance, and durability. • Seamless machine knit liner. • CE cut level 3.

Part No. CDRGCR1GRH7

Description

Size

Shpg. Wt. (lbs.)

Cut Resistant Seamless Liner with a Black HPT Coated Palm

0.1

CDRGCR1GRH8

Cut Resistant Seamless Liner with a Black HPT Coated Palm

0.1

CDRGCR1GRH9

Cut Resistant Seamless Liner with a Black HPT Coated Palm

0.1

CDRGCR1GRH10 Cut Resistant Seamless Liner with a Black HPT

0.1

Coated Palm

WINTER LINED CUT RESISTANT PERFORMANCE GLOVES needs to be maintained. • Seamless machine knit liner with black terry insert. • CE cut level 3.

Cut-resistant HPT dipped palm winter glove. • Rough dipped HPT coating for great grip, abrasion and water resistance and durability. • Excellent for cold weather use when dexterity

Part No. Description CDRGCR1GRHW7 Cut Resistant Seamless Liner with a Thermal

Size

Shpg. Wt. (lbs.)

0.1

Terry Insert, Black HPT Coated Palm

CDRGCR1GRHW8 Cut Resistant Seamless Liner with a Thermal Terry Insert, Black HPT Coated Palm

CDRGCR1GRHW9 Cut Resistant Seamless Liner with a Thermal Terry Insert, Black HPT Coated Palm

CDRGCR1GRHW10 Cut Resistant Seamless Liner with a Thermal Terry Insert, Black HPT Coated Palm

UNSUPPORTED NITRILE GLOVES Chemical, fat, and oil resistant nitrile gloves. Silicone-free to provide less risk of contamination to products. Pebble finish helps make wet handling easier and safer. Canadian Food Inspection Agency accepted (CFIA).

332

Part No.

Description

Applications: food handling and processing, chemical applications, automotive, refineries, petrochemical applications, painting, printing, hazmat, general manufacturing and maintenance.

Length (in.)

Thickness (mil)

Size

Shpg. Wt. (lbs.)

CDRGRN9U7

Unlined

11.5

0.2

CDRGRN9U8

Unlined

11.5

0.2

CDRGRN9U9

Unlined

11.5

0.2

CDRGRN9U10

Unlined

11.5

0.2

CDRGRN11U7

Unlined

0.2

CDRGRN11U8

Unlined

0.2

CDRGRN11U9

Unlined

0.2

CDRGRN11U10

Unlined

0.2

CDRGRN11U11

Unlined

0.2

CDRGRN15F7

Flock Lined

12.5

0.2

CDRGRN15F8

Flock Lined

12.5

0.2

CDRGRN15F9

Flock Lined

12.5

0.2

CDRGRN15F10

Flock Lined

12.5

0.2

CDRGRN15F11

Flock Lined

12.5

0.2

www.westwardtools.ca

2/8/10

4:21 PM

Page 333

KNEE PADS GDN5PF SERIES Powder free nitrile glove. • 100 single use gloves. • Latex and powder free. • Non-sterile for medical use.

Part No. CDRGDN5PF8 CDRGDN5PF9 CDRGDN5PF10

Size

Sold By

Shpg. Wt. (lbs.)

Medium

Box of 100

1.8

Large

Box of 100

1.8

X-Large

Box of 100

1.8

ULTRA-LIGHT FOAM KNEE PADS • Thick molded foam for maximum comfort and protection. • Comfortable, ultra-lightweight design. • Adjustable strap, one size fits all.

Part No.

Description

KP1LF

Ultra-Light Foam Knee Pads

Shpg. Wt. (lbs.) 0.5

STANDARD FOAM KNEE PADS • One piece molded construction. • Foam rubber pad is contoured to the shape of the knee for added protection and comfort. • One size fits all, adjustable straps for a custom fit.

Part No.

Description

KP1F

Standard Foam Knee Pads

Shpg. Wt. (lbs.) 1.0

HARDSHELL POLY CAP KNEE PADS • Provides extra protection for the knees. • Hard cap allows for best surface coverage and knee comfort. • One size fits all.

Part No.

Description

KP2PC

Hardshell Poly Cap Knee Pads

Shpg. Wt. (lbs.) 1.0

HARDSHELL GEL KNEE PADS • Provides cushioning and shock absorption to the knee. • Reduces pressure and hot spots unlike traditional knee pads. • One size fits all.

Part No.

Description

KP3HS

Hardshell Gel Knee Pads

www.westwardtools.ca

Shpg. Wt. (lbs.) 1.0

333

2/8/10

4:22 PM

Page 334

PROTECTIVE CLOTHING

MICROPOROUS DISPOSABLE CLOTHING Microporous Film Laminate (MFL) material that is both light and durable. Lower cost alternative to spunbond olefin fiber garments. MFL combines high tensile strength, barrier protection and breathability. One-time use garments are soft to the touch and tough on the job. Provides great protection keeping out 99% of fibres and hazardous particles greater than 1 micron. May be used in agriculture, healthcare applications, painting/finishing, lead and asbestos abatement, food processing and other work areas that may require full body protection against dirt, dust and other non-hazardous materials.

Part No.

Size

Shpg. Wt. (lbs.)

Coverall, White, Zipperfront, Elastic Wrists/Ankles, No Hood CDRCALTM CDRCALTL

Medium

0.1

Large

0.1

X-Large

0.1

CDRCALT2XL

XX-Large

0.1

CDRCALT3XL

XXX-Large

0.1

CDRCALT4XL

XXXX-Large

0.1

CDRCALT5XL

XXXXX-Large

0.1

CDRCALTXL

Coverall, White, Zipperfront, Elastic Wrists/Ankles, Hood CDRCHEALTM CDRCHEALTL CDRCHEALTM

Medium

0.1

Large

0.1

CDRCHEALTXL

X-Large

0.1

CDRCHEALT2XL

XX-Large

0.1

CDRCHEALT3XL

XXX-Large

0.1

CDRCHEALT4XL

XXXX-Large

0.1

CDRCHEALT5XL

XXXXX-Large

0.1

Part No.

Size

Shpg. Wt. (lbs.)

Lab Coats, White, Collar, Elastic Cuffs, Button Front CDRDCL5M-S

Small

CDRDCL5M-M

Medium

0.1

CDRDCL5M-L

Large

0.1

X-Large

0.1

CDRDCL5M-XL CDRDCSM18

0.1

CDRDCL5M2XL

XX-Large

0.1

CDRDCL5M3XL

XXX-Large

0.1

Shoe Covers, White, Fully Elasticized CDRDSC5M18

Universal (pair)

0.1

Boot Covers, White, Fully Elasticized, Anti-Skid CDRDBC5M17 CDRDBC5M175

17"

0.1

17.5"

0.1

Protective Sleeves, White CDRDSLSM22 CDRDCL5M

334

CDRDSL5M16

16"

0.1

CDRDSL5M18

18"

0.1

CDRDSL5M22

22"

0.1

www.westwardtools.ca

2/8/10

4:23 PM

Page 335

PROTECTIVE CLOTHING

POLYPROPYLENE DISPOSABLE CLOTHING Low cost alternative for disposable clothing in less demanding environments. Breathable, lightweight clothing fits over clothing for cleanliness and provides protection in non-hazardous work environments.

Part No.

Size

Shpg. Wt. (lbs.)

Coverall, White, Zipperfront, Elastic Wrists/Ankles, Hood CDRCHEPOLYM

Medium

0.1

CDRCHEPOLYL

Large

0.1

CDRCHEPOLYXL

X-Large

0.1

CDRCHEPOLY2XL

XX-Large

0.1

CDRCHEPOLY3XL

XXX-Large

0.1

CDRCHEPOLY4XL

XXXX-Large

0.1

CDRCHEPOLY5XL

XXXXX-Large

0.1

Part No.

Size

Shpg. Wt. (lbs.)

Lab Coats, White, Collar, Elastic Cuffs, Button Front CDRDCL3P-S

Small

0.1

CDRDCL3P-M

Medium

0.1

CDRDCL3P-L

Large

0.1

CDRDCL3P-XL

X-Large

0.1

CDRDCL3P2XL

XX-Large

0.1

CDRDCL3P3XL

XXX-Large

0.1

CDRDSL3P22

Shoe Covers, White, Fully Elasticized CDRDSC3P18

Universal (pair)

0.1

Boot Covers, White, Fully Elasticized, Anti-Skid CDRDBC3P17

17"

0.1

Protective Sleeves, White CDRDSL3P16

16"

0.1

CDRDSL3P18

18"

0.1

CDRDSL3P22

22"

0.1

CDRDCL3P

CDRDBC3P17

EXAMINATION GOWNS • Lightweight, 25 grams. • Single use. • Tie back

Colour

Shpg. Wt. (lbs.)

Medium

White

0.2

CDRDSG2P-L

Large

White

0.2

CDRDSG2P-XL

X-Large

White

0.2

CDRDSG2P2XL

XX-Large

White

0.2

Part No.

Description

CDRDSG2P-M

www.westwardtools.ca

335

2/8/10

4:24 PM

Page 336

PROTECTIVE CLOTHING

ANTI-STATIC DISPOSABLE CLOTHING Anti-static microporous film laminate garmets are light and durable made from spunbonded meltbown material (SMMS). One-time use anti-static MFL garments help to prevent the build-up of static electricity. May be used in areas that require anti-static protection to help minimize safety risks, such as the petro-chemical industry.

Part No.

Size

Shpg. Wt. (lbs.)

Coverall, White, Zipperfront, Elastic Wrists/Ankles, Hood

CDRDCA4A

CDRDCA4A-M

Medium

0.1

CDRDCA4A-L

Large

0.1

CDRDCA4A-XL

X-Large

0.1

CDRDCA4A2XL

XX-Large

0.1

CDRDCA4A3XL

XXX-Large

0.1

CDRDCA4A4XL

XXXX-Large

0.1

CDRDCA4A5XL

XXXXX-Large

0.1

Lab Coats, White, Collar, Elastic Cuffs, Button Front CDRDCL4A-S

Small

0.1

CDRDCL4A-M

Medium

0.1

CDRDCL4A-L

Large

0.1

CDRDCL4A-XL

X-Large

0.1

CDRDCL4A2XL

XX-Large

0.1

CDRDCL4A3XL

XXX-Large

0.1

Shoe Covers, White, Fully Elasticized CDRDSC4A18

Universal Size (Pair)

0.1

Boot Covers, White, Fully Elasticized Anti-Skid CDRDSC4A17

17"

0.1

Protective Sleeves, White CDRDCL4A

CDRDSL4A16

16"

0.1

CDRDSL4A18

18"

0.1

CDRDSL4A22

22"

0.1

DISPOSABLE APRONS Part No.

336

Description

Size

Colour

Shpg. Wt. (lbs.)

CDRDAP5M2842 Microporous Apron

28 x 42

White

0.1

CDRDAP3P2842

Polypropylene Apron

28 x 42

White

0.1

CDRDAP4A2842

Microporous Anti-Static

28 x 42

White

0.1

www.westwardtools.ca

2/8/10

4:25 PM

Page 337

PROTECTIVE CLOTHING PONCHO • Attached hood. • Snap closure sides. • Available in 0.10 mm PVC or 0.30 mm PVC/polyester construction.

Part No.

Description

Size

Shpg. Wt. (lbs.)

CDRRP1P-S

0.10 mm PVC Rain Poncho

Small

0.5

CDRRP1P

0.10 mm PVC Rain Poncho

Universal

0.5

CDRRP2PP-S 0.30 mm PVC/Polyester Rain Poncho CDRRP2PP

0.30 mm PVC/Polyester Rain Poncho

PVC/POLYESTER RAINWEAR 3-Piece Rain Suit • Wind and waterproof. • 0.32 mm PVC/polyester/PVC construction. • Attached drawstring hood. • Storm front with zipper and snap closure. • Ventilated cape back and underarm air vents. • Water channels to help direct water away from openings. • 2 pockets with flap closure. • Snap adjustable cuffs.

Small

0.5

Universal

0.5

Rain Jacket • Wind and waterproof. • 0.32 mm PVC/polyester/PVC construction. • Attached drawstring hood. • Storm front with zipper and snap closure. • 2 pockets with flap closure. • Snap adjustable cuffs. Bib-Style Rain Pants • Wind and waterproof. • 0.32 mm PVC/polyester/PVC construction. • Fly front with snap closure.

Part No.

Description

Size

Shpg. Wt. (lbs.)

CDRRS3PP-S

3 Piece Rainsuit, PVC/Polyester

Small

2.0

CDRRS3PP-M

3 Piece Rainsuit, PVC/Polyester

Medium

2.0

CDRRS3PP-L

3 Piece Rainsuit, PVC/Polyester

Large

2.0

CDRRS3PP-XL

3 Piece Rainsuit, PVC/Polyester

X-Large

2.0

CDRRS3PP2XL

3 Piece Rainsuit, PVC/Polyester

XX-Large

2.0

CDRRS3PP3XL

3 Piece Rainsuit, PVC/Polyester

XXX-Large

2.0

CDRRS3PPJ-S

Rain Jacket, PVC/Polyester

Small

1.0

CDRRS3PPJ-M

Rain Jacket, PVC/Polyester

Medium

1.0

CDRRS3PPJ-L

Rain Jacket, PVC/Polyester

Large

1.0

CDRRS3PPJ-XL

Rain Jacket, PVC/Polyester

X-Large

1.0

CDRRS3PPJ2XL

Rain Jacket, PVC/Polyester

XX-Large

1.0

CDRRS3PPJ3XL

Rain Jacket, PVC/Polyester

XXX-Large

1.0

CDRRC1PP-S

Raincoat Long, PVC/Polyester

Small

2.5

CDRRC1PP-M

Raincoat Long, PVC/Polyester

Medium

2.5

CDRRC1PP-L

Raincoat Long, PVC/Polyester

Large

2.5

CDRRC1PP-XL

Raincoat Long, PVC/Polyester

X-Large

2.5

CDRRC1PP2XL

Raincoat Long, PVC/Polyester

XX-Large

2.5

CDRRC1PP3XL

Raincoat Long, PVC/Polyester

XXX-Large

2.5

CDRRS3PPP-S

Rain Bib Pants, PVC/Polyester

Small

0.8

CDRRS3PPP-M

Rain Bib Pants, PVC/Polyester

Medium

0.8

CDRRS3PPP-L

Rain Bib Pants, PVC/Polyester

Large

0.8

CDRRS3PPP-XL

Rain Bib Pants, PVC/Polyester

X-Large

0.8

CDRRS3PPP2XL

Rain Bib Pants, PVC/Polyester

XX-Large

0.8

CDRRS3PPP3XL

Rain Bib Pants, PVC/Polyester

XXX-Large

0.8

www.westwardtools.ca

• Quick release suspenders. • Snap adjustable leg openings. 3⁄4" Length Rain Coat • Wind and waterproof. • 0.35 mm PVC/polyester/PVC construction. • Attached drawstring hood. • Storm front with zipper and snap closure. • Ventilated cape back and underarm air vents. • 2 pockets with flap closure. • Snap adjustable cuffs.

337

2/9/10

8:23 AM

Page 338

PROTECTIVE CLOTHING 2-PIECE TRI-COT GREEN RAINWEAR 2-Piece Tri-Cot Rain Suit Rain Jacket • Wind and waterproof. • 170 g/m2 PU/polyester Tri-Cot construction. • Attached hood concealed in the collar with drawstring and stoppers. • Front with zipper closure. • 2 pockets with flap in front.

Part No.

Description

CDRRS2PU-S CDRRS2PU-M

• Sweep adjustable with drawstring and stoppers. • Cuffs adjustable with velcro. Elastic Waist Pants • Side slit on both sides. • Plain fly front. • Leg openings adjusted by snaps. • All seams stitched and double welded.

Size

Shpg. Wt. (lbs.)

2 Piece Rain Suit, Tri-Cot

Small

3.0

2 Piece Rain Suit, Tri-Cot

Medium

3.0

CDRRS2PU-L

2 Piece Rain Suit, Tri-Cot

Large

3.0

CDRRS2PU-XL

2 Piece Rain Suit, Tri-Cot

X-Large

3.0

CDRRS2PU2XL

2 Piece Rain Suit, Tri-Cot

XX-Large

3.0

CDRRS2PU3XL

2 Piece Rain Suit, Tri-Cot

XXX-Large

3.0

FLAME RETARDANT RAINWEAR 2-Piece Flame Retardent Rain Suit • Wind and waterproof. • Flame retardant. • 0.45 mm PVC/polyester construction.

Bib-Style Rain Pants • Plain fly front. • Full elastic suspenders. • Reinforced crotch.

Rain Jacket • Standing collar with velcro closure. • Detachable drawstring hood. • Double storm front with snap closure. • Snap adjustable cuffs.

338

Part No.

Description

Colour

Size

Shpg. Wt. (lbs.)

CDRRS3FR-S

3 Piece Rain Suit, FR

Green

Small

3.0

CDRRS3FR-M

3 Piece Rain Suit, FR

Green

Medium

3.0

CDRRS3FR-L

3 Piece Rain Suit, FR

Green

Large

3.0

CDRRS3FR-XL

3 Piece Rain Suit, FR

Green

X-Large

3.0

CDRRS3FR2XL

3 Piece Rain Suit, FR

Green

XX-Large

3.0

CDRRS3FR3XL

3 Piece Rain Suit, FR

Green

XXX-Large

3.0

CDRRS3FRJ-S

Rain Jacket, FR

Green

Small

2.0

CDRRS3FRJ-M

Rain Jacket, FR

Green

Medium

2.0

CDRRS3FRJ-L

Rain Jacket, FR

Green

Large

2.0

CDRRS3FRJ-XL

Rain Jacket, FR

Green

X-Large

2.0

CDRRS3FRJ2XL

Rain Jacket, FR

Green

XX-Large

2.0

CDRRS3FRJ3XL

Rain Jacket, FR

Green

XXX-Large

2.0

CDRRS3FRP-S

Rain Pants, FR

Green

Small

2.0

CDRRS3FRP-M

Rain Pants, FR

Green

Medium

2.0

CDRRS3FRP-L

Rain Pants, FR

Green

Large

2.0

CDRRS3FRP-XL

Rain Pants, FR

Green

X-Large

2.0

CDRRS3FRP2XL Rain Pants, FR

Green

XX-Large

2.0

CDRRS3FRP3XL Rain Pants, FR

Green

XXX-Large

2.0

www.westwardtools.ca

2/9/10

8:27 AM

Page 339

PROTECTIVE CLOTHING COVERALLS • Pre-shrunk. • Two way YKK brass zipper front closure. • 7 pockets (two chest pockets,

Part No.

two front pockets, side openings, two big rear pockets and tool pocket on the right leg). • Elastic waist.

Colour

Size

Shpg. Wt. (lbs.)

65/35 Poly/Cotton 7.5 oz. (No Reflective) CDRWCA1NY38

Navy

38 Regular

2.0

CDRWCA1NY40

Navy

40 Regular

2.0

CDRWCA1NY42

Navy

42 Regular

2.0

CDRWCA1NY44

Navy

44 Regular

2.0

CDRWCA1NY46

Navy

46 Regular

2.0

CDRWCA1NY48

Navy

48 Regular

2.0

CDRWCA1NY50

Navy

50 Regular

2.0

CDRWCA1NY52

Navy

52 Regular

2.0

CDRWCA1NY54

Navy

54 Regular

2.0

CDRWCA1NY56

Navy

56 Regular

2.0

100% Cotton 7.5 oz. (With Reflective) CDRWCA2NYR38

Navy

38 Regular

2.0

CDRWCA2NYR40

Navy

40 Regular

2.0

CDRWCA2NYR42

Navy

42 Regular

2.0

CDRWCA2NYR44

Navy

44 Regular

2.0

CDRWCA2NYR46

Navy

46 Regular

2.0

CDRWCA2NYR48

Navy

48 Regular

2.0

CDRWCA2NYR50

Navy

50 Regular

2.0

CDRWCA2NYR52

Navy

52 Regular

2.0

CDRWCA2NYR54

Navy

54 Regular

2.0

CDRWCA2NYR56

Navy

56 Regular

2.0

CDRWCA2NY FRONT CDRWCA2NY BACK

65/35 SHOP COAT • 65/35 poly/cotton 7.5 oz. • Twill fabric. • Pre-shrunk.

Part No.

• Snap front closure. • Four front pockets and side openings. • Available in navy and white.

Colour

Size

Shpg. Wt. (lbs.)

CDRWSC1NY-S

Navy

Small

1.8

CDRWSC1NY-M

Navy

Medium

1.8

CDRWSC1NY-L

Navy

Large

1.8

CDRWSC1NY-XL

Navy

X-Large

1.8

CDRWSC1NY2XL

Navy

XX-Large

1.8

CDRWSC1NY3XL

Navy

XXX-Large

1.8

CDRWSC1WH-S

White

Small

1.8

CDRWSC1WH-M

White

Medium

1.8

CDRWSC1WH-L

White

Large

1.8

CDRWSC1WH-XL

White

X-Large

1.8

CDRWSC1WH2XL

White

XX-Large

1.8

CDRWSC1WH3XL

White

XXX-Large

1.8

www.westwardtools.ca

339

2/9/10

8:29 AM

Page 340

PROTECTIVE CLOTHING INSULATED OUTERWEAR Sturdy 12 oz. cotton duck material and treated with a waterrepellent finish. Insulated with 8 oz. nylon quilted polyester fiberfill. Resistant to wind, snags and abrasions. Main seams are triple stitched for extra strength with thread bar tacked at all stress points. Desert sand brown colour.

THERMAL QUILTED VEST – COTTON DUCK • • • • •

Liner has free-floating diamond stitch pattern. Brass zipper chain. 2 large pockets. Soft rib-knit corduroy collar. Zipper front.

Colour

Size

Shpg. Wt. (lbs.)

CDRWVT5BR-M

Brown, Desert Sand

Medium

2.0

CDRWVT5BR-L

Brown, Desert Sand

Large

2.0

CDRWVT5BR-XL Brown, Desert Sand

X-Large

2.0

CDRWVT5BR2XL Brown, Desert Sand

XX-Large

2.0

CDRWVT5BR3XL Brown, Desert Sand XXX-Large

2.0

Part No.

QUILTED JACKET – COTTON DUCK • • • • •

30" length with zipper front. Corduroy collar. Recessed knit. Storm cuffs on inner sleeves. 4 outside patch pockets and 1 inside safety pocket.

Part No.

Colour

CDRWJQ5BR-M Brown, Desert Sand CDRWJQ5BR-L

Brown, Desert Sand

Size

Shpg. Wt. (lbs.)

Medium

3.6

Large

3.6

CDRWJQ5BR-XL Brown, Desert Sand

X-Large

3.6

CDRWJQ5BR2XL Brown, Desert Sand

XX-Large

3.6

CDRWJQ5BR3XL Brown, Desert Sand

XXX-Large

3.6

BIB OVERALLS – COTTON DUCK • • • • •

Leg zipper to the knee for easy on/off. High back with elastic suspenders for ease of movement. 2 compartment chest pocket. 2 waist and 2 back pockets. Hammer loop and leg tool pockets. Double reinforced knees.

Colour

Size

Shpg. Wt. (lbs.)

CDRWBQ5BR-M

Brown, Desert Sand

Medium

3.8

CDRWBQ5BR-L

Brown, Desert Sand

Large

3.8

CDRWBQ5BR-XL

Brown, Desert Sand

X-Large

3.8

CDRWBQ5BR2XL Brown, Desert Sand

XX-Large

3.8

CDRWBQ5BR3XL Brown, Desert Sand XXX-Large

3.8

Part No.

340

www.westwardtools.ca

2/9/10

8:31 AM

Page 341

PROTECTIVE CLOTHING QUILT LINED COVERALLS – COTTON DUCK • 2 way brass zipper front with snap closures on wind flap for extra protection. • 2 way leg zipper to waist for easy on/off. • Hammer loop and leg tool pockets. • Recessed knit storm cuffs on inner sleeves. • Action back for easy movements. • 12 oz. duck cotton fabric.

Colour

Size

Shpg. Wt. (lbs.)

CDRWCQ5BR-M

Brown, Desert Sand

Medium

3.8

CDRWCQ5BR-L

Brown, Desert Sand

Part No.

Large

3.8

CDRWCQ5BR-XL Brown, Desert Sand

X-Large

3.8

CDRWCQ5BR2XL Brown, Desert Sand

XX-Large

3.8

CDRWCQ5BR3XL Brown, Desert Sand XXX-Large

3.8

UMBRELLA • • • • •

Black. 48" diameter. Automatic open and close. Storage pouch. Folds to 17" long.

Part No.

Description

CDRUM46B Umbrella, Black

Shpg. Wt. (lbs.) 0.2

BOOT SCRUBBER • Nylon bristle brush cleans dirt and debris from the sides and soles of footwear. • Measures 83⁄4" x 6". • Floor or wall mountable. • Mounting hardware included.

Part No.

Description

CDRFPBS1

Boot Scrubber, Floor/Wall Mountable

www.westwardtools.ca

Shpg. Wt. (lbs.) 1.0

341

2/9/10

8:32 AM

Page 342

TRAFFIC SAFETY PREMIUM SERIES CSA TRAFFIC VESTS • • • • • • • •

CDRTVCSA-OR

CDRTVCSA-YW

Meets CSA Z96-02 Class 2, Level 2 requirements. 2" 3M Scotchlite reflective material. Velcro tear-away strips. Micro-mesh polyester for breathability. Two outside pockets, and a safety d-ring access slot. Machine washable. BC WCB/worksafe/DOT configuration. Meets CSA class 2 level 2.

Shpg. Wt. (lbs.)

Part No.

Description

CDRTVCSA-OR

Fluorescent Orange, Standard Size

0.5

CDRTVCSA-OR-OS

Fluorescent Orange, Over Size

0.5

CDRTVCSA-YW

Fluorescent Yellow, Standard Size

0.5

CDRTVCSA-YW-OS

Fluorescent Yellow, Over Size

0.5

PREMIUM SERIES MESH CSA TRAFFIC VESTS • • • • • • •

2" 3M Scotchlite™ reflective material. 300 denier water-proof polyester. 5 point tear-away velcro closure and side straps. Four outside pockets and a safety D-ring access slot. Machine washable. BC WCB/worksafe/DOT configuration. Meets CSA class 2 level 2.

Colour

Size

Shpg. Wt. (lbs.)

CDRTVCSAM-OR

High Visibility Orange

Standard

0.5

CDRTVCSAM-OR-OS

High Visibility Orange

Over Size

0.5

CDRTVCSAM-YW

High Visibility Yellow

Standard

0.5

CDRTVCSAM-YW-OS

High Visibility Yellow

Over Size

0.5

Part No.

CDRTVCSAM-OR

CDRTVCSAM-YW

VALUE SERIES CSA TRAFFIC VESTS • 2" reflective material, 2 stripes on front and back plus stripe around torso. • 300D polyester. • Front velcro closure. • Meets CSA class 2 level 2.

Part No.

CDRTV5CSA-OR

342

CDRTV5CSA-YW

Colour

Size

Shpg. Wt. (lbs.)

CDRTV5CSA-OR-M

High Visibility Orange

Medium

0.5

CDRTV5CSA-OR-L

High Visibility Orange

Large

0.5

CDRTV5CSA-OR-XL

High Visibility Orange

X-Large

0.5

CDRTV5CSA-OR2XL

High Visibility Orange

XX-Large

0.5

CDRTV5CSA-YW-M

High Visibility Yellow

Medium

0.5

CDRTV5CSA-YW-L

High Visibility Yellow

Large

0.5

CDRTV5CSA-YW-XL

High Visibility Yellow

X-Large

0.5

CDRTV5CSA-YW2XL

High Visibility Yellow

XX-Large

0.5

www.westwardtools.ca

2/9/10

8:33 AM

Page 343

TRAFFIC SAFETY VALUE SERIES MESH CSA TRAFFIC VESTS • 2" reflective material, 2 stripes on front and back plus stripe around torso. • 300D polyester mesh. • Front velcro closure. • Meets CSA class 2 level 2.

Part No.

Colour

Size

Shpg. Wt. (lbs.)

CDRTV5CSAM-OR-M

High Visibility Orange

Medium

0.5

CDRTV5CSAM-OR-L

High Visibility Orange

Large

0.5

CDRTV5CSAM-OR-XL

0.5

High Visibility Orange

X-Large

CDRTV5CSAM-OR2XL High Visibility Orange

XX-Large

0.5

CDRTV5CSAM-YW-M

High Visibility Yellow

Medium

0.5

CDRTV5CSAM-YW-L

High Visibility Yellow

Large

0.5

CDRTV5CSAM-YW-XL

High Visibility Yellow

X-Large

0.5

CDRTV5CSAM-YW2XL

High Visibility Yellow

XX-Large

0.5

CDRTV5CSAM-OR

CDRTV5CSAM-YW

TRAFFIC VEST (NON-CSA) • • • • •

General purpose non-CSA traffic vest. Velcro tear-away closure. Mesh polyester fabric for breathability. Two outside pockets and safety D-ring access slot. Machine washable.

Part No.

Description

Shpg. Wt. (lbs.)

CDRTV1OR

Fluorescent Orange

0.5

CDRTV1YW

Fluorescent Yellow

0.5 CDRTV1OR

CDRTV1YW

CDRTV2M-OR

CDRTV2M-YW

MESH SAFETY VESTS • 2" reflective material, 2 stripes on front and “X” on back plus stripe around torso. • Polyester mesh. • Front velcro closure. • Elastic sides.

Colour

Size

Shpg. Wt. (lbs.)

CDRTV2M-OR

Fluorescent Orange

One Size

0.5

CDRTV2M-YW

Fluorescent Yellow

One Size

0.5

Part No.

www.westwardtools.ca

343

2/9/10

8:34 AM

Page 344

TRAFFIC SAFETY CSA SURVEYORS VEST • 2" 3M Scotchlite™ reflective material, 2 stripes on front and “X” on back plus stripe around torso. • 300D polyester. • 6 pockets (1 cell phone pocket, 2 pen pockets, 2 side pockets, and 1 rear zip pocket). • Front snap closure. • BC WCB/Worksafe/DOT configuration. • Meets CSA class 2 level 2.

Part No.

Colour

Size

Shpg. Wt. (lbs.)

CDRTVSCSA-OR-M

High Visibility Orange

Medium

1.2

CDRTVSCSA-OR-L

High Visibility Orange

Large

1.2

CDRTVSCSA-OR-XL

High Visibility Orange

X-Large

1.2

CDRTVSCSA-OR2XL

High Visibility Orange

XX-Large

1.2

CDRTVSCSA-OR3XL

High Visibility Orange

XXX-Large

1.2

CDRTVSCSA-YW-M

High Visibility Yellow

Medium

1.2

CDRTVSCSA-YW-L

High Visibility Yellow

Large

1.2

CDRTVSCSA-YW-XL

High Visibility Yellow

X-Large

1.2

CDRTVSCSA-YW2XL

High Visibility Yellow

XX-Large

1.2

CDRTVSCSA-YW3XL

High Visibility Yellow

XXX-Large

1.2

CSA TRAFFIC T-SHIRTS • 2" 3M Scotchlite™ reflective material. • 300 denier water-proof polyester. • V-neck short sleeve with front storage pockets and two belt holders for radios or phones. • Machine washable. • BC WCB/Worksafe/DOT configuration. • Meets CSA class 2 level 2.

Part No.

Colour

Size

Shpg. Wt. (lbs.)

CDRTSCSA-OR-M

High Visibility Orange

Medium

1.8

CDRTSCSA-OR-L

High Visibility Orange

Large

1.8

CDRTSCSA-OR-XL

High Visibility Orange

X-Large

1.8

CDRTSCSA-OR2XL

High Visibility Orange

XX-Large

1.8

CDRTSCSA-OR3XL

High Visibility Orange

XXX-Large

1.8

CDRTSCSA-YW-M

High Visibility Yellow

Medium

1.8

CDRTSCSA-YW-L

High Visibility Yellow

Large

1.8

CDRTSCSA-YW-XL

High Visibility Yellow

X-Large

1.8

CDRTSCSA-YW2XL

High Visibility Yellow

XX-Large

1.8

CDRTSCSA-YW3XL

High Visibility Yellow

XXX-Large

1.8

Y STYLE TRAFFIC HARNESS • 2" reflective material sewn on orange nylon fabric. • Elastic waist band with snap closure. • Reflective “Y” pattern on back.

Part No. CDRTHY-OR-M CDRTHY-OR-L

344

Size

Shpg. Wt. (lbs.)

Medium

0.2

Large

0.2

CDRTHY-OR-XL

X-Large

0.2

CDRTHY-OR2XL

XX-Large

0.2

www.westwardtools.ca

2/9/10

8:35 AM

Page 345

TRAFFIC SAFETY

TRAFFIC COVERALLS • 2" 3M Scotchlite™ reflective material, 2 stripes on front and back plus “X” on back, stripe around arms, torso and ankles. • 65/35 poly/cotton 7.5 oz. • Two-way YKK brass zipper front closure. • 7 pockets (two chest pockets, two front pockets, side openings, two big rear pockets and tool pocket on the right leg). • Elastic waist.

Colour

Size

Shpg. Wt. (lbs.)

CDRWCA30RR38

High Visibility Orange

3.2

CDRWCA30RR40

High Visibility Orange

3.2

CDRWCA30RR42

High Visibility Orange

3.2

CDRWCA30RR44

High Visibility Orange

3.2

CDRWCA30RR46

High Visibility Orange

3.2

CDRWCA30RR48

High Visibility Orange

3.2

CDRWCA30RR50

High Visibility Orange

3.2

CDRWCA30RR52

High Visibility Orange

3.2

CDRWCA3YWR38

High Visibility Yellow

3.2

CDRWCA3YWR40

High Visibility Yellow

3.2

CDRWCA3YWR42

High Visibility Yellow

3.2

CDRWCA3YWR44

High Visibility Yellow

3.2

CDRWCA3YWR46

High Visibility Yellow

3.2

CDRWCA3YWR48

High Visibility Yellow

3.2

CDRWCA3YWR50

High Visibility Yellow

3.2

CDRWCA3YWR52

High Visibility Yellow

3.2

Part No.

CSA 2 IN 1 JACKET • 300D polyester with nylon and fleece lining. • 2" wide 3M Scotchlite™ reflective material, 2 stripes on front and “X” on back plus stripe around arms and torso. • Zip-off the jacket arms and turn it into a body warming vest. • Full front zip fastening.

Colour

Size

Shpg. Wt. (lbs.)

CDRTJV21CSA-OR-M

High Visibility Orange

Medium

2.4

CDRTJV21CSA-OR-L

High Visibility Orange

Large

2.4

CDRTJV21CSA-OR-XL

High Visibility Orange

X-Large

2.4

CDRTJV21CSA-OR2XL

High Visibility Orange

XX-Large

2.4

CDRTJV21CSA-OR3XL

High Visibility Orange

XXX-Large

2.4

CDRTJV21CSA-YW-M

High Visibility Yellow

Medium

2.4

CDRTJV21CSA-YW-L

High Visibility Yellow

Large

2.4

CDRTJV21CSA-YW-XL

High Visibility Yellow

X-Large

2.4

CDRTJV21CSA-YW2XL

High Visibility Yellow

XX-Large

2.4

CDRTJV21CSA-YW3XL

High Visibility Yellow

XXX-Large

2.4

Part No.

www.westwardtools.ca

345

2/9/10

8:36 AM

Page 346

TRAFFIC SAFETY CSA TRAFFIC 3-IN-1 JACKET/BIB PANT Jacket – 3-in-1 all season jacket with 2" 3M reflective tape on jacket shell, inner jacket is fleece lined, black. Bib Pants – Heavy-duty suspenders with 2" 3M reflective strips around legs and waist. • Available in fluorescent orange or yellow. • Jacket meets CSA Class 2 Level 2. • When worn with appropriate pants, CSA Class 3 Level 2 is obtained.

Part No.

Description

Shpg. Wt. (lbs.)

Jacket 3-In-1 CDR311OR-MED Medium, Orange

0.1

CDR311OR-LGE

Large, Orange

0.1

CDR311OR-XL

X-Large, Orange

0.1

CDR311OR2XL

XX-Large, Orange

0.1

CDR311OR3XL

XXX-Large, Orange

0.1

CDR311YW-MED Medium, Yellow

0.1

CDR311YW-LGE

Large, Yellow

0.1

CDR311YW-XL

X-Large, Yellow

0.1

CDR311YW2XL

XX-Large, Yellow

0.1

CDR311YW3XL

XXX-Large, Yellow

0.1

Bib Pant

CSA FLEECE HOODED JACKET • 280G fleece. • 2" wide 3M Scotchlite™ reflective material, 2 stripes on front and “X” on back around arms and torso • Full front zip fastening. • Drawstring hood. • 3 pockets (1 cell phone, 2 front pockets). • BC WCB/Worksafe/DOT configuration. • When worn with appropriate pants, CSA class 3 level 2 is obtained.

346

CDR911OR-MED Medium, Orange

0.1

CDR911OR-LGE

Large, Orange

0.1

CDR911OR-XL

X-Large, Orange

0.1

CDR911OR2XL

XX-Large, Orange

0.1

CDR911OR3XL

XXX-Large, Orange

0.1

CDR911YW-MED Medium, Yellow

0.1

CDR911YW-LGE

Large, Yellow

0.1

CDR911YW-XL

X-Large, Yellow

0.1

CDR911YW2XL

XX-Large, Yellow

0.1

CDR911YW3XL

XXX-Large, Yellow

0.1

Colour

Size

Shpg. Wt. (lbs.)

CDRTHCSA-OR-M

High Visibility Orange

Medium

2.4

CDRTHCSA-OR-L

High Visibility Orange

Large

2.4

CDRTHCSA-OR-XL

Part No.

High Visibility Orange

X-Large

2.4

CDRTHCSA-OR2XL High Visibility Orange

XX-Large

2.4

CDRTHCSA-OR3XL High Visibility Orange

XXX-Large

2.4

CDRTHCSA-YW-M

High Visibility Yellow

Medium

2.4

CDRTHCSA-YW-L

High Visibility Yellow

Large

2.4

CDRTHCSA-YW-XL

High Visibility Yellow

X-Large

2.4

CDRTHCSA-YW2XL High Visibility Yellow

XX-Large

2.4

CDRTHCSA-YW3XL High Visibility Yellow

XXX-Large

2.4

www.westwardtools.ca

2/9/10

8:37 AM

Page 347

TRAFFIC SAFETY CSA 3-IN-1 JACKET • Use as a lined jacket, unlined jacket or fleece zip-up and still meet CSA and WCB requirements. • 300D polyester with nylon and fleece lining. • 2" wide 3M Scotchlite™ reflective material, 2 stripes on front and “X” on back, plus stripe around arms and torso. • Full front zip fastening. • Breathable sleeve zips for better airflow. • Velcro adjustable cuff. • Snap-on hood. • 3 pockets (1 side pocket and 2 inner pockets). • BC WCB/Worksafe/DOT configuration. • Meets CSA class 2 level 2. • When worn with appropriate pants, CSA class 3 level 2 is obtained.

Part No.

Colour

Size

Shpg. Wt. (lbs.)

CDRTJV312CSA-OR-M

High Visibility Orange

Medium

3.2

CDRTJV312CSA-OR-L

High Visibility Orange

Large

3.2

CDRTJV312CSA-OR-XL

High Visibility Orange

X-Large

3.2

CDRTJV312CSA-OR2XL

High Visibility Orange

XX-Large

3.2

CDRTJV312CSA-OR3XL

High Visibility Orange

XXX-Large

3.2

CDRTJV312CSA-YW-M

High Visibility Yellow

Medium

3.2

CDRTJV312CSA-YW-L

High Visibility Yellow

Large

3.2

CDRTJV312CSA-YW-XL

High Visibility Yellow

X-Large

3.2

CDRTJV312CSA-YW2XL

High Visibility Yellow

XX-Large

3.2

CDRTJV312CSA-YW3XL

High Visibility Yellow

XX-Large

3.2

CSA 3⁄4 LENGTH TRAFFIC COAT • 300D polyester with PVC and nylon lining. • 2" wide 3M Scotchlite™ reflective material, 2 stripes on front and “X” on back, plus stripes around arms and torso. • Full front zip fastening with snap closed flap. • Knitted cuff. • Fixed hood with drawstring/velcro closure. • 6 pockets (2 side pockets, 2 map pockets, 1 cell phone pocket and 1 inner pen pocket). • BC WCB/Worksafe/DOT configuration. • Meets CSA class 2 level 2. • When worn with appropriate pants, CSA class 3 level 2 is obtained.

Part No.

Colour

Size

Shpg. Wt. (lbs.)

CDRTLC1CSA-OR-M

High Visibility Orange

Medium

3.4

CDRTLC1CSA-OR-L

High Visibility Orange

Large

3.4

CDRTLC1CSA-OR-XL

High Visibility Orange

X-Large

3.4

CDRTLC1CSA-OR2XL

High Visibility Orange

XX-Large

3.4

CDRTLC1CSA-OR3XL

High Visibility Orange

XXX-Large

3.4

CDRTLC1CSA-YW-M

High Visibility Yellow

Medium

3.4

CDRTLC1CSA-YW-L

High Visibility Yellow

Large

3.4

CDRTLC1CSA-YW-XL

High Visibility Yellow

X-Large

3.4

CDRTLC1CSA-YW2XL

High Visibility Yellow

XX-Large

3.4

CDRTLC1CSA-YW3XL

High Visibility Yellow

XXX-Large

3.4

www.westwardtools.ca

347

2/9/10

8:38 AM

Page 348

TRAFFIC SAFETY CSA INSULATED TRAFFIC BOMBER JACKET • 300D polyester with quilted nylon lining. • 2" 3M Scotchlite™ reflective material, 2 stripes on front and “X” on back, plus stripe around arms and torso. • Front zipper closure with stud closing front flap to help eliminate drafts. • Velcro adjustable elastic cuffs. • Fixed drawstring hood. • 5 pockets (1 cell phone pocket, 2 side pockets and 2 zippered map pockets). • BC WCB/Worksafe/DOT configuration. • Meets CSA class 2 level 2. • When worn with appropriate pants, CSA class 3 level 2 is obtained.

Colour

Size

Shpg. Wt. (lbs.)

CDRTBJ1CSA-OR-M

High Visibility Orange

Medium

3.4

CDRTBJ1CSA-OR-L

High Visibility Orange

Large

3.4

CDRTBJ1CSA-OR-XL

High Visibility Orange

X-Large

3.4

CDRTBJ1CSA-OR2XL

High Visibility Orange

XX-Large

3.4

CDRTBJ1CSA-OR3XL

High Visibility Orange XXX-Large

3.4

CDRTBJ1CSA-YW-M

High Visibility Yellow

Medium

3.4

CDRTBJ1CSA-YW-L

High Visibility Yellow

Large

3.4

CDRTBJ1CSA-YW-XL

High Visibility Yellow

X-Large

3.4

CDRTBJ1CSA-YW2XL

High Visibility Yellow

XX-Large

3.4

CDRTBJ1CSA-YW3XL

High Visibility Yellow

XXX-Large

3.4

Part No.

BIB STYLE TRAFFIC PANTS • • • • • • •

300D polyester. 2" wide 3M Scothlite™ reflective material, 2 stripe around each leg. Full front zip fastening. Elastic waist band. Zip and velcro closed legs. 1 front pocket. When worn with appropriate jacket/coat, CSA class 3 level 2 is obtained.

Colour

Size

Shpg. Wt. (lbs.)

CDRTP9130R-M

High Visibility Orange

Medium

2.7

CDRTP9130R-L

High Visibility Orange

Large

2.7

CDRTP9130R-XL

High Visibility Orange

X-Large

2.7

CDRTP9130R2XL

High Visibility Orange

XX-Large

2.7

CDRTP9130R3XL

High Visibility Orange XXX-Large

2.7

CDRTP913YW-M

High Visibility Yellow

Medium

2.7

CDRTP913YW-L

High Visibility Yellow

Large

2.7

CDRTP913YW-XL

High Visibility Yellow

X-Large

2.7

CDRTP913YW2XL

High Visibility Yellow

XX-Large

2.7

CDRTP913YW3XL

High Visibility Yellow

XXX-Large

2.7

Part No.

348

www.westwardtools.ca

2/9/10

8:39 AM

Page 349

TRAFFIC SAFETY ELASTIC WAIST TRAFFIC PANTS • • • • • •

300D polyester. 2" wide 3M Scotchlite™ reflective material, 2 stripes around each leg. Elastic waist band. Snap adjustable leg cuffs. 2 side pockets. When worn with appropriate jacket/coat, CSA class 2 level 3 is obtained.

Colour

Size

Shpg. Wt. (lbs.)

CDRTP-OR-M

High Visibility Orange

Medium

2.2

CDRTP-OR-L

High Visibility Orange

Large

2.2

CDRTP-OR-XL

High Visibility Orange

X-Large

2.2

CDRTP-OR2XL

High Visibility Orange

XX-Large

2.2

CDRTP-OR3XL

High Visibility Orange

XXX-Large

2.2

CDRTP-YW-M

High Visibility Yellow

Medium

2.2

CDRTP-YW-L

High Visibility Yellow

Large

2.2

CDRTP-YW-XL

High Visibility Yellow

X-Large

2.2

CDRTP-YW2XL

High Visibility Yellow

XX-Large

2.2

CDRTP-YW3XL

High Visibility Yellow

XXX-Large

2.2

Part No.

CSA RAIN TRAFFIC JACKET • 400D PVC with fleece lining. • 2" wide 3M Scotchlite™ reflective materials, 2 stripes on front and "X" on back, plus stripes around arms and torso. • Velcro adjustable cuff. • Fixed hood with drawstring/velcro closure. • 1 pocket. • BC WCB/Worksafe/DOT configuration. • Meets CSA class 2 level 2. • When worn with appropriate pants, CSA class 2 level 3 is obtained.

Colour

Size

Shpg. Wt. (lbs.)

CDRTRJCSA-OR-M

High Visibility Orange

Medium

2.4

CDRTRJCSA-OR-L

High Visibility Orange

Large

2.4

CDRTRJCSA-OR-XL

High Visibility Orange

X-Large

2.4

CDRTRJCSA-OR2XL

High Visibility Orange

XX-Large

2.4

CDRTRJCSA-OR3XL

High Visibility Orange

XXX-Large

2.4

Part No.

BIB STYLE TRAFFIC RAIN PANTS • • • • •

400D polyester. 2" wide 3M Scotchlite™ reflective material, 1 stripe around each leg. Full front velcro fastening with snap closure flap. Zip and velcro closed legs. When worn with appropriate jacket/coat, CSA class 2 level 3 is obtained.

Colour

Size

Shpg. Wt. (lbs.)

CDRTRP-OR-M

High Visibility Orange

Medium

2.7

CDRTRP-OR-L

High Visibility Orange

Large

2.7

CDRTRP-OR-XL

High Visibility Orange

X-Large

2.7

CDRTRP-OR2XL

High Visibility Orange

XX-Large

2.7

CDRTRP-OR3XL

High Visibility Orange

XXX-Large

2.7

Part No.

www.westwardtools.ca

349

2/9/10

8:41 AM

Page 350

TRAFFIC SAFETY LED SAFETY WAND Ideal for traffic control, parking guides, security, construction sites, military and law enforcement and emergency signaling. • 12" safety wand with 14 LED flashlight feature. • Flashing or constant mode. • Excellent day and night visibility. • Weatherproof, lightweight, and water resistant. • Hand strap lanyard included. • Operates using 3 C-cell batteries, not included.

Part No.

Description

Shpg. Wt. (lbs.)

FLW3C12

12" Safety Wand w/LED Flashlight

1.0

TRAFFIC CONES CDRTCPVC6

CDRTCPVC12

• • • • • • •

High visibility orange. Stackable. Increased wall thickness at base to help prevent separation. Smooth glossy finish for grease and dirt resistance. Wide base design with a low centre of gravity providing maximum stability. One-piece flow molded construction. 100% PVC construction for durability.

Part No.

Description

CDRTCPVC6

6" Weighted Traffic Cone

Shpg. Wt. (lbs.) 0.5

CDRTCPVC12 12" Weighted Traffic Cone

1.5

CDRTCPVC18 18" Weighted Traffic Cone

2.5

CDRTCPVC28 28" Weighted Traffic Cone

5.2

BARRICADE TAPE CDRTCPVC18

CDRTCPVC28

3" wide 0.04 mm polyethylene tape can be quickly placed to provide warning of hazards or dangerous situations. Sold in a 1,000' dispenser box or 200' roll. Available in French and English.

Part No.

Message

Size

Colour

Shpg. Wt. (lbs.)

English Message

CDRBT31CA4BYE

CDRBT31CA4BYE Caution

3" x 1,000' Black on Yellow

0.2

CDRBT32CA4BYE Caution

3" x 200' Black on Yellow

0.2

CDRBT31DD4BRE Danger Do Not Enter

3" x 1,000'

Black on Red

0.2

CDRBT32DD4BRE Danger Do Not Enter

3" x 200'

Black on Red

0.2

3" x 1,000'

Black on Red

0.2

3" x 200'

Black on Red

0.2

Bilingual Message CDRBT31DA4BR

Danger

CDRBT32DA4BR

Danger

CDRBT31DA4BY

Danger

3" x 1,000' Black on Yellow

0.2

CDRBT32DA4BY

Danger

3" x 200' Black on Yellow

0.2

French Message CDRBT32DA4BR

CDRBT31DA4BY

350

CDRBT31AT4BYF

Attention

3" x 1,000' Black on Yellow

CDRBT32AT4BYF

Attention

3" x 200' Black on Yellow

0.2

CDRBT31DD4BRF Danger D'efense D'entrer 3" x 1,000' Black on Red

0.2

CDRBT32DD4BRF Danger D'efense D'entrer 3" x 200'

0.2

Black on Red

www.westwardtools.ca

2/9/10

8:42 AM

Page 351

HEAD PROTECTION

SAFETY CAPS Versatile and dependable design, with grooved HDPE outer shell, rain trough and accessory slots, 4 point, nylon web suspension with ratchet size adjustment. Featuring 3-level height adjustment. CSA Type 1 and ANSI Type 1, Class E certified.

Part No.

Colour

Shpg. Wt. (lbs.)

Dark Green

0.8

CDRHH1RCSA-NY

Navy

0.8

CDRHH1RCSA-OR

Orange

0.8

CDRHH1RCSA-RD

Red

0.8

CDRHH1RCSA-WH

White

0.8

CDRHH1RCSA-YW

Yellow

0.8

Chin Strap

0.1

Ratchet Suspension

0.1

CDRHH1RCSA-GRD

Parts and Accessories CDRHH1RCS2 CDRHHR1S

STANDARD BUMP CAPS • For situations where protection is desired, but not required. Such as automotives, pest control, food processing. • Adjustable sizing.

Part No. CDRHBC1BK CDRHBC1GRD CDRHBC1NY

Colour

Shpg. Wt. (lbs.)

Black

0.5

Dark Green

0.5

Navy

0.5

CDRHBC1RD

Red

0.5

CDRHBC1WH

White

0.5

CDRHBC1GYW

Yellow

0.5

Replacement Suspension for CDRHBC1 CDRHBC1RS

Replacement Suspension

0.1

BASEBALL STYLE BUMP CAP • Provides a more casual look than a traditional bump cap. • For situations where protection is desired, but not required. Such as automotives, pest control, food processing. • Adjustable sizing.

Part No. CDRHBC2BK CDRHBC2GRD

Colour

Shpg. Wt. (lbs.)

Black

0.5

Dark Green

0.5

CDRHBC2NY

Navy

0.5

CDRHBC2RD

Red

0.5

CDRHBC2YW

Yellow

0.5

www.westwardtools.ca

351

2/9/10

8:43 AM

Page 352

HEARING PROTECTION DISPOSABLE FOAM EARPLUGS • Disposable, one size fits all. • Soft, non-irritating PU foam material for comfort. • Rejects build-up of dirt and moisture.

Part No.

Description

Pkg. Qty.

NRR Rating

Shpg. Wt. (lbs.)

CDRFEP03

FEP03, Uncorded

200 Pairs

2.0

CDRFEP03C

FEP03C, Corded

100 Pairs

2.0

NRR Rating

Shpg. Wt. (lbs.)

4.4

2.2

NRR Rating

Shpg. Wt. (lbs.)

EARPLUG DISPENSER PLUG INCLUDED • Disposable, one size fits all. • Soft, non-irritating PU foam material for comfort. • Rejects build-up of dirt and moisture.

Part No. CDRFEP03D500

Description Earplug Dispenser with 500 Pairs of disposable Foam Earplugs

CDRFEP03D500R Replacement Refill for Earplug Dispenser, 500 Pair

REUSABLE TPR EARPLUGS • Reusable, one size fits all. • TPR construction. • 4 flange design.

Part No.

Description

CDRFEP04T

Earplugs, Reusable Uncorded

0.1

CDRFEP04TC

Earplugs, Reusable with Cord

0.1

FOAM BANDED EARPLUGS Canal cap design, soft comfortable ear pads that fit the ear. NRR 18 dB.

352

Part No.

Description

CDRFEP07

FEP07 Hearing Band

NRR Rating

Shpg. Wt. (lbs.)

0.1

www.westwardtools.ca

2/9/10

8:45 AM

Page 353

HEARING PROTECTION SHAPED BANDED EARPLUGS • Disposable, one size fits all. • Soft, non-irritating PU foam material for comfort. • Rejects build-up of dirt and moisture.

Part No.

Description

CDRFEP12 FEP12 Shaped Hearing Band CDRFEP12-5R Replacement Pods for FEP12 Hearing

NRR Rating

Shpg. Wt. (lbs.)

0.1

—

0.1

Band, 5 Pairs

HEADBAND STYLE EARMUFF Lightweight, dielectric earmuffs that can be worn in three different positions; over the head, under the chin, or behind the head.

Part No.

Description

CDREM105

Earmuffs, Headband Model

NRR Rating

Shpg. Wt. (lbs.)

0.7

FOLDABLE HEADBAND STYLE EARMUFF Lightweight plus dielectric. This convenient muff is also foldable. Easily kept and stored where you need it.

Part No.

Description

CDREM106

Earmuffs, Foldable

NRR Rating

Shpg. Wt. (lbs.)

0.7

NRR Rating

Shpg. Wt. (lbs.)

0.7

WIRE HEADBAND EARMUFF • • • • •

Comfortable foam ear cushions. Durable and robust construction. Folds down for easy storage. Easy adjustment. NRR28.

Part No. CDREM109A

Description Earmuffs with Premium Wire Frame Headband

www.westwardtools.ca

353

2/9/10

8:46 AM

Page 354

EYE PROTECTION Available 3rd Quarter of 2010

METAL FRAME SAFETY EYEWEAR • Sleek up to date styling. • Popular lens tints avaliable. • CSA Certified to Z94.3.

Available 3rd Quarter of 2010

Lens Tint & Coating

Shpg. Wt. (lbs.)

Metal Frame

Clear, Hard Coat

0.1

Metal Frame

Gray, Hard Coat

0.1

CDRC101SS-BLHC

Metal Frame

Revo Blue Mirror

0.1

CDR101SB-RHC

Metal Frame

Revo Red Mirror

0.1

Part No.

Frame Colour

CDRC101SS-GHC CDRC101SB-GHC

HIGH STYLE SAFETY EYEWEAR • Modern stylish design. • Superior choices in frame colour and lens tint. • CSA Certified to Z94.3.

Frame Colour

Lens Tint & Coating

Shpg. Wt. (lbs.)

CDR10128G-CAF

Black with Gray Temples

Clear, Anti-fog

0.1

CDR10128G-GHC

Silver with Black Temples

Gray, Hard Coat

0.1

CDR10128G-RHC

Black with Gray Temples

Revo Red Mirror

0.1

CDR10128B-CAF

Silver with Black Temples

Clear, Anti-fog

0.1

CDR10128B-GHC

Silver with Black Temples

Gray, Hard Coat

0.1

CDR10128B-BLHC

Silver with Black Temples

Revo Blue Mirror

0.1

Part No.

SAFETY GLASSES Lightweight, comfortable eyewear for all day protection. Made of optical grade polycarbonate for best optics. • Economical, one size fits all. • Provides impact protection from both the front and side. • Anti-scratch coating. • CUL certified to the CSA Z94.1 requirements.

Lens Tint & Coating

Shpg. Wt. (lbs.)

CDRCA1112CHC Translucent Clear Temples

Clear, Hard Coat

0.1

CDRCA1112GHC Translucent Clear Temples

Gray, Hard Coat

0.1

CDRCA1112CAF Translucent Clear Temples

Clear, Anti-Fog

0.1

CDRCA1112AHC Translucent Clear Temples Translucent Clear Temples CDRCA1112IO

Amber, Hard Coat

0.1

Indoor/Outdoor, Silver Mirror

0.1

Part No.

CDRCA1112SM

354

Frame Colour

Translucent Clear Temples Silver Mirror, Hard Coat

0.1

www.westwardtools.ca

2/9/10

8:47 AM

Page 355

EYE PROTECTION SAFETY GLASSES Lightweight, stylish eyewear, polycarbonate lens with integrated nosepiece and rubberized temple ends that provide additional support and comfort to the wearer. Lens provides 99.9% protection from harmful UV radiation and is optically correct for clear undistorted vision. • Sporty unilens styling is universally accepted by wearers. • Excellent frontal and side impact protection. • CSA certified to Z94.3 standards.

Part No.

Frame Colour

Lens Tint & Coating

Shpg. Wt. (lbs.)

CDRCA1113CHC

Translucent Clear Temples

Clear, Hard Coat

0.1

CDRCA1113GHC

Translucent Clear Temples

Gray, Hard Coat

0.1

CDRCA1113CAF

Translucent Clear Temples

Clear, Anti-Fog

0.1

CDRCA1113AHC

Translucent Clear Temples

Amber, Hard Coat

0.1

CDRCA1113IO

Translucent Clear Temples Indoor/Outdoor, Silver Mirror

0.1

CDRCA1113SM

Translucent Clear Temples

0.1

Silver Mirror, Hard Coat

SAFETY GLASSES Economical shield-style protective eyewear. Lightweight, comfortable all day wear on the job. Adjustable temples allow individual wearer to adjust for both comfort and a secure fit. Polycarbonate lens offers the best available impact protection. • Economical unilens styling is universally accepted by wearers. • Excellent frontal and side impact protection. • Polycarbonate lens absorbs 99.9% of harmful UV radiation. • CSA certified to Z94.3 standards.

Part No.

Frame Colour

Lens Tint & Coating

Shpg. Wt. (lbs.)

CDRCA1101B-CHC

Black

Clear, Hard Coat

0.1

CDRCA1101B-GHC

Black

Gray, Hard Coat

0.1

CDRCA1101BL-CHC

Blue

Clear, Hard Coat

0.1

CDRCA1101BL-GHC

Blue

Gray, Hard Coat

0.1

CDRCA1101B-AHC

Black

Amber, Hard Coat

0.1

CDRCA1101B-IO

Black

Indoor/Outdoor, Silver Mirror

0.1

CDRCA1101B-SM

Black

Silver Mirror, Hard Coat

0.1

SAFETY GLASSES Lightweight stylish eyewear, with high impact polycarbonate lens. Features a soft, cushioned nose bridge to increase wearer comfort and to diffuse impact. Rubberized temple ends provide additional support. Lens is optically correct for clear undistorted vision. • Sporty unilens styling is universally accepted by wearers. • Excellent frontal and side impact protection. • Polycarbonate lens absorbs 99.9% of harmful UV radiation. • CSA certified to Z94.3 standards.

Part No.

Frame Colour

Lens Tint & Coating

Shpg. Wt. (lbs.)

CDRCA1117B-CHC

Black

Clear, Hard Coat

0.1

CDRCA1117B-GHC

Black

Gray, Hard Coat

0.1

CDRCA1117B-CAF

Black

Clear, Anti-Fog

0.1

CDRCA1117B-AHC

Black

Amber, Hard Coat

0.1

CDRCA1117B-IO

Black

Indoor/Outdoor, Silver Mirror

0.1

CDRCA1117B-SM

Black

Silver Mirror, Hard Coat

0.1

www.westwardtools.ca

355

2/9/10

8:48 AM

Page 356

EYE PROTECTION

SQUARE LIGHTWEIGHT SAFETY GLASSES Lightweight, stylish eyewear, polycarbonate lens with rubberized temple ends that provide additional support and comfort to the wearer. Lens provides a 99.9% protection from harmful UV radation and is optically correct for clear undistorted vision. • Sporty unilens styling is universally accepted by wearers. • Excellent frontal and side impact protection. • CSA certified to Z94.3 standards.

Available 3 rd Quarter of 2010

Part No.

Frame Colour

Lens Tint & Coating

Shpg. Wt. (lbs.)

CDR411CHC

Black with Gray Temples

Clear, Hard Coated

0.1

CDR411CAF

Black with Gray Temples

Clear, Anti-Fog

0.1

CDR411GHC

Black with Gray Temples

Gray, Hard Coated

0.1

CDR411GAF

Black with Gray Temples

Gray, Anti-Fog

0.1

CDR411AHC

Black with Gray Temples

Amber, Hard Coated

0.1

CDR411LBHC

Black with Gray Temples

Light Blue, Hard Coated

0.1

CDR411IO

Black with Gray Temples

Indoor/Outdoor Mirror

0.1

CDR411SM

Black with Gray Temples

Silver Mirror

0.1

PREMIUM OVER-THE-GLASSES EYEWEAR Polycarbonate visitors spectacles, universal one-size fits most wearers. Suitable for wear either as an individual safety glass or for over-the-glasses (OTG) use for those wearing prescription eyewear. Uncoated, optically correct lens. • All polycarbonate for superior impact protection. • Polycarbonate lens absorbs 99.9% of harmful UV radiation. • Advanced design to fit over most prescription eyewear. • CSA Certified to Z94.3 standards.

Available 3 rd Quarter of 2010

Part No. CDRCA1013UC

356

Frame Colour

Lens Tint & Coating

Shpg. Wt. (lbs.)

Clear

Clear, Uncoated

0.1

www.westwardtools.ca

2/9/10

8:49 AM

Page 357

EYE PROTECTION VISITOR SPECS Polycarbonate visitors spectacles, universal one-size fits most wearers. Suitable for wear either as an individual safety glass or for over-the-glass (OTG) use for those wearing prescription eyewear. Uncoated, optically correct lens. Meets CSA Z94.3-2002 requirements. • All polycarbonate for superior impact protection. • Fits over most prescription eyewear. • Polycarbonate lens absorbs 99.9% of harmful UV radiation.

Part No. CDRCA1012UC

Description

Sold By

Shpg. Wt. (lbs.)

Pair

0.2

Dispenser Carton of 10 Pair

2.0

Clear Lens and Temple

CDRCA1012UC-DISP Clear Lens and Temple

SPLASH GOGGLES Both the impact and splash goggle feature a soft PVC body for fit and comfort. The impact goggle has direct air vents allowing uniform airflow and less chance of fogging. The splash goggle has four indirect ventilation ports to allow for flow of air while protecting the wearer from splash. Sized to fit over most prescription eyewear. Meets requirements of CSA Z94.3-2002 High Impact. • Vented to reduce fogging. • Lens absorbs 99.9% of harmful UV radiation. • Elastic fabric headband. • Meets CSA Z94.3-2002 requirements.

Part No.

Description

Lens Tint & Coating

Shpg. Wt. (lbs.)

CDRCA5101UC

Impact Goggle

Clear, Uncoated

0.2

CDRCA5103CAF

Splash Goggle

Clear, Anti-Fog

0.2

FACESHIELD Headgear with adjustable ratchet suspension, and microporous sweatband allows for customized fit. Proprietary quick change feature allows for easy and rapid exchange of face shield on headgear. Meets requirements of CSA Z94.3-2007 High Impact. • Spark deflector on headgear provides additional frontal protection. • Lift front headgear. • Face shield absorbs 99.9% of harmful UV radiation. • Meets CSA Z94.3-2007 requirements.

Part No. CDRCA6302

www.westwardtools.ca

Description Black Headgear with Brow Guard

Type

Size

Shpg. Wt. (lbs.)

Ratchet

—

0.5

CDRCA6501CL

Replacement Visor

Polycarbonate Clear

91⁄2 x 151⁄2 x 0.080

0.1

CDRCA6501GN

Replacement Visor

Polycarbonate Green

91⁄2 x 151⁄2 x 0.080

0.1

CDRCA6503-5

Replacement Visor

Polycarbonate IR Shade 5

91⁄2 x 151⁄2 x 0.080

0.1

357

2/9/10

8:50 AM

Page 358

RESPIRATORY PROTECTION

FACE SHIELD • • • • • •

Anti-fog (both sides). Anti-static. Anti-glare. Optically clear. Latex safe. For use in situations where there is risk of splashing of blood or other bodily fluids. • Eyeglass compatiable.

Part No.

Description

CDRCA3MFS

Faceshield

Size

Shpg. Wt. (lbs.)

One Size Fits All

1.0

M1001 Provides relief from nuisance dusts such as pollen, alfalfa, animal dander, saw dust and other non-toxic dusts. • Lightweight, disposable, single use mask. • Economical. • Single elastic band. • Flexible aluminum nose piece. • Not NIOSH approved. • Not for use against toxic dusts.

Part No. CDRM1001

NIOSH Approval

Pkg. Qty.

Shpg. Wt. (lbs.)

1.0

CDR4190

N99 PARTICULATE RESPIRATORS

CDR4191

358

The Condor N99 particulate respirators filter at least 99% of airborne particles that are free of oil. • NIOSH approved. • Lightweight. • Low breathing resistance for improved wearer comfort. • Adjustable nose clip with soft foam nose piece. • Elastic head strap (no latex). • CDR4191 has a built-in exhalation valve reducing humidity build-up.

Part No.

Description

CDR4190

N99 Basic Respirator, 20 Per Box

Shpg. Wt. (lbs.) 0.7

CDR4191

N99 Respirator with Valve, 12 Per Box

0.5

www.westwardtools.ca

2/9/10

8:51 AM

Page 359

RESPIRARTORY PROTECTION

N95 PARTICULATE RESPIRATORS For protection where workers may be exposed to airborne particles and mists. Examples: sweeping, grinding, sanding, bagging and other dusty operations. • Lightweight. • Low breathing resistance for improved wearer comfort. • Adjustable nose clip with soft foam nose piece. • Elastic latex-free strap. • CDR4151 and CDR1151ML have built-in exhalation valve reducing humidity build-up. • CDR1150ML, CDR1150S and CDR1151ML feature ultrasonically welded head straps to help keep the respirator in place without breaking or pulling. • N95 NIOSH approved.

Part No.

Description

CDR4150

Shpg. Wt. (lbs.)

Respirators with Stapled on Straps CDR4150

N95 Basic Respirator, 20 Per Box

0.7

CDR4151

N95 Respirator with Valve, 12 Per Box

0.5

Respirators with Ultrasonically Welded on Straps CDR1150ML

N95 Basic Respirator, 20 Per Box

0.7

CDR1150S

N95 Basic Respirator, Small, 20 Per Box

0.7

CDR1151ML

N95 Respirator with Valve, 12 Per Box

0.5

CDR1151ML

N95 FOLD FLAT PARTICULATE RESPIRATOR For protection where workers may be exposed to airborne particles and mists. Examples: sweeping, grinding, sanding, bagging and most other dusty operations. • Conforms to 42 CFR part 84, N95 class, NIOSH approved, TC-84A-4047. • Lightweight. • Low breathing resistance for improved wearer comfort. • Adjustable plastic nose clip with soft foam nose piece. • Looped elastic head strap (no latex). • Individually wrapped.

Part No.

Description

CDR6150

Foldable N95 Respirator, 20 Per Box

www.westwardtools.ca

Shpg. Wt. (lbs.) 0.7

359

2/9/10

8:52 AM

Page 360

FALL PROTECTION

SHOCK ABSORBING LANYARDS E4 & E6 E4 lanyards are designed for a maximum worker mass of 254 lbs. (115 kg). E6 lanyards are designed for a worker mass of 200 lbs./90 kg to 386 lbs./175 kg providing heavier workers or those carrying a lot of tools added safety. • 1.75" polyester webbing. • Minimum tensile strength >5,000. • Shock absorbing pack. • Snap hooks: AJ523A zinc plated stamped steel. • 6' length. • Made in Canada. • CSA certified to Z259.11-05.

Part No.

Description

Shpg. Wt. (lbs.)

CDRFPL6E4

E4 Lanyard, 6'

1.9

CDRFPL6E6

E6 Lanyard, 6'

2.1

FALL PROTECTION HARNESSES • • • • •

1.75" polyester webbing. Minimum tensile strength >5,000 lbs. Sliding dorsal D-ring. Universal size. 3 point adjustment harness features pass through buckles leg/chest closures. • 5 point adjustment harness offer more comfort and feature adjustable shoulder, leg and chest straps, again with pass through buckles. • Made in Canada. • CSA certified to Z259.10-06.

Part No.

360

Description

Shpg. Wt. (lbs.)

CDRFPH3D 3 Point Harness, Universal Size

1.8

CDRFPH5D 5 Point Harness, Universal Size

2.4

www.westwardtools.ca

W361-10.qxp

2/12/10

1:52 PM

Page 361

AIR TOOLS & LUBRICATION

Air Impacts . . . . . . . . . . . . . 362-363 Air Grinders . . . . . . . . . . . . . . . . 364 Air Shears & Nibblers . . . . . . . . . 365 Air Drills . . . . . . . . . . . . . . . . . . 365 Air Chippers . . . . . . . . . . . . . . . . 366 Air Hammers & Accessories . . 366-368 Airline Controls. . . . . . . . . . . 369-373 Hose Reels . . . . . . . . . . . . . 374-375 Rotary Pumps . . . . . . . . . . . . . . . 376 Grease Guns. . . . . . . . . . . . . 380-382 Grease Gun Accessories . . . . 383-384 Grease Fittings . . . . . . . . . . . 385-386

2/8/10

2:19 PM

Page 362

IMPACT WRENCHES

1⁄2"

ATM121 ATM123

Square Standard Drive Bolt Size (in.) Part No. Description (in.) 1⁄2"

AIR IMPACTS

Item No. ATM121 – 1⁄2" impact wrench removes lug nuts and bolts for overall general use, farm, and light work. Item No. ATM122 – 1⁄2" impact wrench is designed for tire shop, suspension, frame, and other heavy-duty applications. Item No. ATM123 – 1⁄2" impact wrench with extended anvil. Allows for use of flip socket and access to deep wheel wells.

Weight (net)

Ult. Torque Shpg. Working Min. Air Inlet Avg. Air Wt. Hose Torque Range @ 90 PSI Consumption Thread (lbs.) (ft-lbs) (ft-lbs) Size (in.) Size (in.) (CFM)

Impact Standard Shank

ATM121 Pistol Grip

1⁄2

9⁄16

6.3 lbs.

5.1

1⁄4

3⁄8

40 - 300

380

6.5

ATM122 Pistol Grip

1⁄2

5⁄8

6.3 lbs.

5.1

1⁄4

3⁄8

50 - 350

425

6.5

5⁄8

6.3 lbs.

5.1

1⁄4

3⁄8

50 - 400

450

6.5

1⁄2"

Impact Extended Anvil

ATM123 Pistol Grip

1⁄2

3⁄4"

HEAVY-DUTY IMPACT WRENCH

Heavy-duty impact wrench that delivers 1,000 ft-lbs of ultimate torque in forward mode with a working torque range of 200 – 750 ft-lbs, making this an ideal tool for most medium to heavy-duty applications. Well balanced ergonomic handle design allows for continuous use. Comfortable, soft grip helps to reduce operator fatigue. Two piece construction makes removal of the nose piece for maintenance fast and easy. Ring-type socket retainer allows for fast socket changes.

Square Standard Drive Bolt Size (in.) Part No. Description (in.)

Weight (net)

ATM341 Pistol Grip

11.4 lbs.

3⁄4

Ult. Torque Shpg. Working Min. Air Inlet Avg. Air Wt. Hose Torque Range @ 90 PSI Consumption Thread (lbs.) (ft-lbs) (ft-lbs) Size (in.) Size (in.) (CFM) 6.1

1⁄4

3⁄8

200 - 750

1,000

11.8

1" HEAVY-DUTY PISTOL GRIP IMPACT WRENCH Powerful and balanced twin hammer impact mechanism for maximum output and smoothness. 1,000 ft-lbs of torque provides power to remove and replace stubborn fasteners.

Square Standard Drive Bolt Size (in.) Part No. Description (in.)

Weight (net)

ATM1P

20.0 lbs.

362

Pistol Grip

11⁄4

Ult. Torque Shpg. Working Min. Air Inlet Avg. Air Wt. Hose Torque Range @ 90 PSI Consumption Thread (lbs.) (ft-lbs) (ft-lbs) Size (in.) Size (in.) (CFM) 13.9

3⁄8

1⁄2

200 - 850

1,000

20.5

www.westwardtools.ca

2/8/10

2:20 PM

Page 363

IMPACT WRENCHES

1" SERIOUS DUTY IMPACT WRENCH At 1,500 ft-lbs of torque, this impact delivers top performance in tight spaces. Powerful double rocking dog mechanism provides maximum smoothness and output.

Ult. Torque Shpg. Working Min. Air Inlet Avg. Air Square Standard Torque Range @ 90 PSI Wt. Hose Drive Bolt Size Weight Consumption Thread (lbs.) (ft-lbs) (ft-lbs) Size (in.) Size (in.) (CFM) (in.) (net) (in.) Part No. Description ATM15

D-Handle

11⁄4

28.0 lbs.

16.4

1⁄2

200 - 1,250

1,500

28.2

1" SERIOUS DUTY D-HANDLE IMPACT WRENCH A working torque range of 200 – 900 ft-lbs with 1,100 ft-lbs of ultimate torque provides ample power to remove and replace fasteners on trucks, buses and heavy equipment.

1⁄4", 3⁄8"

D-Handle

11⁄4

30.0 lbs.

17.5

1⁄2

200 - 900

1,100

30.5

& 1⁄2" RATCHETS

Ratchets remove and installs nuts, bolts and in a variety of automotive to commercial applications. Ball socket retainers provide fast socket replacement.

Part No. Description

Square Drive (in.)

Weight (net)

Standard Bolt Air Inlet Size (in.) NPT(F) (in.)

Min. Hose Working Torque Shpg. Wt. Size (in.) Range (ft-lbs) (lbs.)

ATR14

Ratchet 1⁄4"

1⁄4

1.1 lbs.

1⁄4

3⁄8

5 - 15

1.3

ATR38

Ratchet 3⁄8"

3⁄8

2.5 lbs.

3⁄8

1⁄4

3⁄8

10 - 45

2.7

ATR12

1⁄2"

1⁄2

4.3 lbs.

1⁄2

1⁄4

3⁄8

10 - 75

4.6

Ratchet

DIE GRINDERS ATG14 die grinder is great for high speed grinding, porting, smoothing, general polishing, and deburring in heavy-duty work. ATG14M die grinder is great for high speed grinding, porting, smoothing, general polishing, and deburring in medium-duty work. ATG14A angle die grinder is great for high speed grinding, porting, gasket removing, general polishing, and deburring in confined areas. Ergonomic santoprene grip.

Collet Diameter

Part No. Description

Min. Hose Size (in.)

Free Speed (RPM)

Air Inlet NPT(F) (in.)

Weight (net)

Shpg. Wt. (lbs.)

3⁄8

Die Grinders – Straight ATG14

Die Grinder, 1⁄4"

ATG14M Die Grinder,

1⁄4"

1⁄4", 1⁄8",

Mini

25,000

3⁄4

1⁄4

1.5 lbs.

1.7

1⁄4", 1⁄8"

6 mm

3⁄8

25,000

1⁄3

1⁄4

0.7 lbs.

0.9

1⁄4", 1⁄8"

3⁄8

18,000

1⁄3

1⁄4

1.0 lbs.

1.2

Die Grinder – 90° Angle ATG14A

Die Grinder, 1⁄4" Angle

www.westwardtools.ca

363

2/8/10

2:21 PM

Page 364

GRINDERS DIE GRINDER Die grinders are compact but powerfully accurate in collet alignment, lightweight, and are widely used for grinding and deburring work with a mounted wheel or rotary burr. Locking lever throttle, ring throttle, and extended spindle are available to suit your application.

Burr Head Grinding Collet Capacity Wheel Throttle Capacity (in.) Capacity (in.) (in.) Part No. Type

Free Speed (RPM)

Length (in.)

FG50-1F

18,000

733⁄64

Lever

1⁄4

11⁄4

7⁄8

Shpg. Air Inlet Avg. Air Wt. Consumption NPT(F) Air Hose (in.) Size (in.) (lbs.) (CFM) 15.2

1⁄4

5⁄16

1.7

ANGLE GRINDERS Max. Dia. Throttle Grinding Wheel (in.) Part No. Type

Free Speed (RPM)

FA5E13F

Lever

12,000

FA7E5VF

Lever

7,000

Length (in.)

Avg. Air Consumption (CFM)

Min. Hose Size (in.)

Shpg. Wt. (lbs.)

(M)

117⁄64

33.5

3⁄8

4.2

UNC (M)

123⁄32

49.5

1⁄2

6.8

Spindle Thread Size 3⁄8"-24 5⁄8"-11

STRAIGHT GRINDERS With centrifugal speed governor and noise reduction mechanism. All models are locking throttle types.

Max. Dia. Throttle Grinding Wheel (in.) Part No. Type FG4H3F

Lever

Free Speed (RPM)

Spindle Thread Size

9,500

5⁄8"-11

4 x 3⁄8 x 5⁄8

Air Inlet Avg. Air Length Consumption NPT(F) (in.) (CFM) (in.) 1647⁄64

28.2

Air Hose Size (in.)

Shpg. Wt. (lbs.)

1⁄2

4.6

3⁄8

CUT-OFF SAW ATC3 cutting tool has 23,000 RPM and has the speed and power to cut through steel quickly. It cuts through 1" diameter steel rods, fiberglass, copper/aluminum tubing, and angle iron up to 1⁄2".

Part No. Description ATC3

364

Cut-Off, 3"

Collet Diameter (in.)

Min. Hose Size (in.)

Free Speed (RPM)

Air Inlet NPT(F) (in.)

Weight (net)

Shpg. Wt. (lbs.)

3" Wheel

3⁄8

23,000

3⁄4

1⁄4

1.5 lbs.

1.7

www.westwardtools.ca

2/8/10

2:23 PM

Page 365

SHEARS & DRILLS SHEAR Designed to cut angles and squares in sheet metal, aluminum, rubber and plastic. Provides cutting performance up to 18 gauge steel. 2,500 strokes per minute.

Shpg. Min. Continuous Air Air Inlet Avg. Air Strokes Hose Weight Wt. Per Min. Consumption Consumption NPT(F) Size (in.) (net) (lbs.) (in.) (SCFM) (CFM) (SPM) Part No. ATS25

2,500

6.7

19.2

1⁄4

3⁄8

2.5 lbs.

2.6

NIBBLER Designed to make intricate cuts in sheet metal and aluminum, leaving a burr free finish. Provides cutting power for cutting up to 16 gauge steel.

Shpg. Min. Continuous Air Air Inlet Avg. Air Strokes Hose Weight Wt. Per Min. Consumption Consumption NPT(F) Size (in.) (net) (lbs.) (in.) (SCFM) (CFM) (SPM) Part No. ATN38

3,800

7.8

17.3

1⁄4

3⁄8

1.8 lbs.

1.9

PNEUMATIC DRILLS – PISTOL GRIP WSWATD38R, 3⁄8" air drill is used to drill, hone, hole saw, and wire brush most metal or wood surfaces in medium-duty applications. WSWATD12R, 1⁄2" air drill is used to drill, hone, ream, hole saw, and wire brush most metal, wood, masonry, and concrete applications.

Chuck Size Drill Shank (in.) Range (in.)

Part No.

Description

ATD38R

Drill, 3⁄8" Rev.

3⁄8

3⁄64

ATD12R

1⁄2"

1⁄2

3⁄64

Drill,

Rev.

Air Inlet NPT(F) (in.)

Min. Hose Size (in.)

- 3⁄8

1⁄4

3⁄8

2,200

6.3 lbs.

6.5

1⁄2

1⁄4

3⁄8

500

3.5 lbs.

3.8

Free Speed (RPM) Weight (net)

Shpg. Wt. (lbs.)

PNEUMATIC DRILL – RIGHT ANGLE This 3⁄8" angle air drill is used to drill, hone, ream, hole saw, and wire brush most metal or wood surfaces. Angle head suited for confined areas.

Part No.

Description

ATD38A

Drill, 3⁄8" Angle

Chuck Size Drill Shank (in.) Range (in.) 3⁄8

3⁄64

- 3⁄8

Air Inlet NPT(F) (in.)

Min. Hose Size (in.)

1⁄4

3⁄8

Free Speed (RPM) Weight (net) 1,800

Shpg. Wt. (lbs.)

2.5 lbs.

2.3

AUTOMOTIVE SCREWDRIVER Ideal for small fastening work in electronic products, computer assembly and automotive applications.

Part No.

Drive Size (in.)

Maximum Torque (in-lbs)

Working Torque (in-lbs)

Impacts Per Min.

Avg. Air Consumption (CFM)

Air Inlet NPT(F) (in.)

Weight (net)

Shpg. Wt. (lbs.)

ATT14H

1⁄4,

Hex

130

75 - 120

11,000

2.9

1⁄4

2.5 lbs.

2.7

ATT14L

1⁄4,

Hex

5 - 50

2,000

2.8

1⁄4

2.5 lbs.

2.7

www.westwardtools.ca

365

2/8/10

2:24 PM

Page 366

HAMMERS & CHIPPERS AIR HAMMER Air hammer cuts, chips and scrapes most materials, and is used for medium-duty automotive exhaust removal, front-end and masonry.

Part No. Description ATH25

Air Hammer

Shank Opening

Piston Stroke (in.)

Min. Hose Size (in.)

0.401"

25⁄8

3⁄8

Avg. Air Blows Per Min Air Inlet Consumption (CFM) (BPM) NPTF (in.) 3,500

1⁄4

Weight (net)

Shpg. Wt. (lbs.)

3.5 lbs.

3.8

CHISELS FOR AIR HAMMERS Part No. Description

Shank Size (in.)

Overall Length (in.)

Shpg. Wt. (lbs.)

0.401

7.0

0.4

AC1

Weld Splitter

AC2

Panel Cutter

0.401

7.4

0.3

AC3

Muffler Cutter

0.401

7.4

0.3

AC4

Double Panel Cutter

0.401

6.8

0.3

AC5

Cold Chisel

0.401

6.8

0.3

AC6

Tapered Point

0.401

6.7

0.3

AC7

Rivet Cutter

0.401

6.8

0.3

AC8

Straight Punch

0.401

6.7

0.3

AC9

Scraper

0.401

6.7

0.3

CHISEL SETS FOR AIR HAMMERS Shpg. Wt. (lbs.)

Part No. Description ACK5

Includes: AC1, AC2, AC3, AC5 and AC6

1.7

ACK9

Includes: AC1, AC2, AC3, AC4, AC5, AC6 AC7, AC and AC9

2.9

FLUX CHIPPERS Flux chippers are ideal for light chipping, carving stone, scaling, removing paint, rust, welded flux and light fins from castings.

FCH20F

Blows Per Piston Piston Length Average Air Air Inlet Thread Min. Hose Shpg. Part No. Min. (BPM) Diameter (in.) Stroke (in.) (in.) Consumption (CFM) Size (in.) Size (in.) Wt. (lbs.) FCH20F

5,400

25⁄32

5⁄8

659⁄64

4.9

1⁄4

1.7

81⁄32

6.4

1⁄4

3⁄8

3.3

913⁄32

6.4

1⁄4

5⁄16

3.7

FCH25

8,000

25⁄32

FCH25B

8,000

25⁄32

CHISELS FOR FCH20F, FCH25, FCH25B Part No. Description

F1-1

366

F3-2

Shpg. Wt. (lbs.)

F1-1

6" Blank

0.4

F2-2

5⁄8"

x 6" Flat

0.4

F2-3

5⁄8"

x 8" Flat

0.4

F2-4

5⁄8"

x 10" Flat

0.6

F2-5

1⁄2"

x 12" Flat

0.6

F2-5W

11⁄2"

F3-2

1" x 6" Flat

0.4

F3-3

1" x 8" Flat

0.4

F3-4

1" x 10" Flat

0.6

F3-5

1" x 12" Flat

0.6

x 12" Flat

0.8

www.westwardtools.ca

2/8/10

2:30 PM

Page 367

HAMMERS & CHIPPERS NEEDLE SCALER Fuji needle scalers are useful for removing welded flux, sand from castings, scales from forgings, rust, paint and shells from ships, hulls, and finishing rough surfaces of rocks and concrete regardless of uneven and irregular surfaces.

Air Air No. and No. and Inlet Hose Shpg. Avg. Air Piston Needle Diameter Diameter Needle Blows Throttle Per Min Diameter Length of Needle of Needle Stroke Length Consumption NPT(F) Size Wt. (in.) (lbs.) (in.) (CFM) (in.) (in.) (2 mm) (3 mm) (in.) (in.) (BPM) Part No. Type FNS2

Straight

8,000

73⁄32

9⁄32

1321⁄32

6.4

1⁄4

3⁄8

4.1

CHIPPING & CAULKING HAMMERS Chipping and caulking hammers are simple, sturdy, light and powerful. Recommended for general chipping and caulking, riveting, extracting sand from castings and removing weld flux, rust, paint and fins from castings.

Shape of Blows Per Piston Diameter Min Chisel (in.) (BPM) Part No. Bushing FC01-3 FC2Z1 FC4Z1

Hex Hex Hex

3,000

25⁄32

2,500

11⁄8

1 680

11⁄8

Piston Stroke (in.) 13⁄4 2 4

Min. Air Inlet Average Air Chisel Size Hose Bushing Length Consumption Thread Size (in.) Size (in.) (CFM) (mm) (in.) 12 x 45

103⁄4

14.8 x 60

1315⁄32

14.8 x 60

1645⁄64

Shpg. Wt. (lbs.)

14.8

1⁄4

3⁄8

6.8

21.1

3⁄8

1⁄2

12.5

23.0

3⁄8

1⁄2

14.9

CHISELS FOR FC2Z1, FC4Z1 Part No.

Description

Shpg. Wt. (lbs.)

WH8

8" Hex Blank

1.0

WH8F

3⁄4"

1.0

WH8P

8" Hex Point

0.8

WH10F

3⁄4"

x 10" Flat

1.2

WH12F

3⁄4"

x 12" Flat

1.4

WH12P

12" Hex Point

x 8" Hex Flat

1.4

CHISELS FOR FC01 SERIES Part No.

Description

Shpg. Wt. (lbs.)

WJB8

8" Chisel

0.6

WJB8F

8" Hex Flat

0.6

WJB8P

8" Hex Point

0.6

www.westwardtools.ca

367

2/8/10

2:32 PM

Page 368

ACCESSORIES AIR COUPLERS & CONNECTORS ATA1

ATA13

ATA3

ATA14

ATA4

ATA15

ATA6

ATA16

Part No.

Description

ATA1

Air Adjusting Valve

0.3

ATA3

Coupler Plug, 1⁄4" NPT Female, A Style

0.1

ATA4

Coupler Body,

NPT Female, P Style

0.2

ATA5

Coupler Body, 3⁄8" NPT Female, P Style

0.2

ATA6

Coupler Plug, 3⁄8" NPT Male, P Style

0.1

ATA17

ATA18

ATA8

ATA9

ATA19

Coupler Plug,

ATA8

Coupler Plug, 1⁄4" NPT Male, P Style

ATA21

ATA22

ATA11

ATA23

ATA12

3⁄8"

NPT Female, P Style

0.1 0.2

Coupler Body,

1⁄4"

NPT Female, M Style

0.2

ATA10

Coupler Body,

1⁄4"

NPT Male, M Style

0.1

ATA11

Coupler Plug, 1⁄4" NPT Male, M Style

0.1

ATA12

Coupler Plug,

1⁄4"

NPT Female, M Style

0.1

ATA13

Coupler Body,

NPT, A Style

0.1

ATA14

Coupler Plug, 1⁄4" NPT Male, A

0.1

ATA15 ATA10

1⁄4"

ATA7 ATA9 ATA7

Shpg. Wt. (lbs.)

1⁄4"

Brass Male Hose End,

1⁄4"

ATA16

Brass Male Hose End,

3⁄8"

ID ID

0.1

ATA17

Brass Hose Mender, 1⁄4" ID

ATA18

Brass Hose Mender, 3⁄8" ID

0.1

ATA19

Male Hose End, 1⁄4" ID

0.1

ATA21

Air Chuck

0.1

ATA22

Safety Air Chuck

0.1

ATA23

Coupler Assembly Quick Change

0.4

0.1 0.1

AIR TOOL ACCESSORIES

ATA38

Part No.

Description

ATA38

Swivel Head Connector With Regulator

Shpg. Wt. (lbs.) 0.2

ATA39

Gauge, 160 PSI

0.2

ATA39

CHISEL HOLDERS

ATA34

368

ATA35

Part No.

Description

Shpg. Wt. (lbs.)

ATA34

Spring For Air Hammer

0.2

ATA35

Quick Change Chisel Retainer

0.5

www.westwardtools.ca

2/8/10

2:33 PM

Page 369

AIR MANAGEMENT AIR FILTERS Suitable for Modular mounting. Press type manual drain for easy operation. Bronze filtering element separator and shield for efficient moisture separator. Maximum supply pressure 145 PSI (10 BAR) on models with polycarbonate bowl, 290 PSI (20 BAR) on models with metal bowl. Steel bowl guard fitted on polycarbonate bowls, metal bowls without sight

Port Part No.

Description

Size (in.)

glass. Metal bowls are recommended for use in environments containing chemicals, such as acetone, benzene, kerosene, gasoline, carbon tetrachloride, ethylene dichloride, toluene and/or air compressor systems using fire resistant lubricants. • Maximum temperature 60° C/140° F. • Fitted with 40 micron filter. • Wall mounting bracket and external auto drain off valve available as accessories.

Maximum Flow Rate*

Bowl Size

Height

Width

Shpg. Wt.

(CFM)

(L/min)

(oz.)

(mL)

(in.)

(lbs.)

Polycarbonate Bowl with Guard AF60151

Miniature

1⁄4

800

0.3

4.45

1.57

0.2

AF60152

Intermediate

1⁄4

2,250

1.08

5.51

2.16

0.2

AF60153

Intermediate

3⁄8

2,250

1.08

5.51

2.16

0.2

AF60154

Standard

1⁄2

125

3,500

1.5

6.77

2.75

0.3

AF60155

Heavy-Duty

3⁄4

175

5,000

5.6

165

10.24

3.54

0.5

AF60156

Heavy-Duty

230

6,500

5.6

165

10.24

3.54

0.6

Miniature

1⁄4

800

0.3

4.53

1.57

0.2

AF60181

Intermediate

3⁄8

2,250

2.15

7.40

2.16

0.2

AF60182

Standard

1⁄2

125

3,500

3.0

8.82

2.75

0.3

AF60183

Heavy-Duty

3⁄4

175

5,000

5.6

165

10.43

3.54

0.5

AF60184

Heavy-Duty

230

6,500

5.6

165

10.43

3.54

0.6

Metal Bowl AF60180

*Inlet Pressure 90 PSI (6 BAR) and Pressure Drop 7.5 PSI (0.5 BAR)

AIR REGULATORS Suitable for panel and modular mountings. Nonraising “Press to Lock” adjusting knob for locking at any set pressure. • Maximum supply pressure 220 PSI (15 BAR).

• Maximum temperature 60° C/140° F. • Adjustment range: 7 – 145 PSI (0.5 BAR – 10 BAR). • Wall mounting brackets and pressure gauges available as accessories.

Maximum Flow Rate*

Pressure

Height

Width

Shpg. Wt.

Part No.

Description

Port Size (in.)

(CFM)

(L/min)

Gauge Port Size (in.)

(in.)

(lbs.)

AR60051

Miniature

1⁄4

600

1⁄8

3.19

1.57

0.2

2,500

1⁄8

5.31

2.16

0.2

AR60052

Intermediate

1⁄4

AR60053

Intermediate

3⁄8

88 88

2,500

1⁄8

5.31

2.16

0.2

AR60054

Standard

1⁄2

140

4,000

1⁄8

6.50

2.75

0.3

AR60055

Heavy-Duty

3⁄4

175

5,000

1⁄4

6.97

3.54

0.5

AR60056

Heavy-Duty

210

6,000

1⁄4

6.97

3.54

0.6

*Inlet Pressure 105 PSI (7 BAR) Supply Pressure 90 PSI (6 BAR) and Pressure Drop 15 PSI (1 BAR)

www.westwardtools.ca

369

2/8/10

2:34 PM

Page 370

AIR MANAGEMENT containing chemicals, such as acetone, benzene, kerosene, gasoline, carbon tetrachloride, ethylene dichloride, tolune and/or air compressor systems using fire resistant lubricants. • Maximum temperature 60° C/140° F. • Recommended oil: 32 grade. • Wall mounting bracket available as an accessory.

LUBRICATORS

WSWAL60253

Lubricators maintain a constant oil-to-air density over a wide range of flow. Suitable for modular mounting. Fog/MicroMist type, up to 50' runs. Precision oil feed adjustment. Steel bowl guard fitted on polycarbonate bowls, metal bowls without sight glass. Metal bowls are recommended for use in environments

WSWAL60282

Port Part No.

Description

Size (in.)

Maximum Flow Rate* (CFM)

(L/min)

Height

Width

Shpg. Wt.

(oz.)

Bowl Size (mL)

(in.)

(lbs.)

Polycarbonate Bowl with Guard AL60251

Miniature

1⁄4

1,350

0.68

5.31

1.57

0.2

AL60252

Intermediate

3⁄8

106

3,000

1.93

6.18

2.16

0.2

AL60253

Standard

1⁄2

200

5,650

5.14

152

7.48

2.75

0.3

AL60254

Heavy-Duty

3⁄4

255

7,200

6.8

200

10.75

3.54

0.5

AL60255

Heavy-Duty

318

9,000

6.8

200

10.75

3.54

0.6

Metal Bowl AL60280

Miniature

1⁄4

1,350

0.68

5.31

1.57

0.2

AL60281

Intermediate

3⁄8

106

3,000

3.38

100

8.07

2.16

0.2

Standard

1⁄2

200

5,650

6.76

200

9.45

2.75

0.3

AL60283

Heavy-Duty

3⁄4

255

7,200

6.8

200

11.0

3.54

0.5

AL60284

Heavy-Duty

318

9,000

6.8

200

11.0

3.54

0.6

AL60282

*Inlet Pressure 90 PSI (6 BAR) and Pressure Drop 7.5 PSI (0.5 BAR)

WALL MOUNTING BRACKET Wall mounting bracket for use with filter/regulator/lubricator combinations.

Part No.

Description

Shpg. Wt. (lbs.)

AFRL60600WB Miniature Wall Mounting Bracket

0.1

AFRL60601WB Intermediate Wall Mounting Bracket

0.1

AFRL60602WB Standard Wall Mounting Bracket

0.1

AFRL60603WB Heavy-Duty Wall Mounting Bracket

0.1

WALL MOUNTING BRACKET Wall mounting bracket for use with 2 and 3 piece filter/regulator/lubricator combination units.

Part No.

Description

Shpg. Wt. (lbs.)

AFRL60640WB Miniature Wall Mount Bracket

0.1

AFRL60641WB Intermediate Wall Mount Bracket

0.1

AFRL60642WB Standard Wall Mount Bracket

0.1

AFRL60643WB Heavy-Duty Wall Mount Bracket

0.1

WALL MOUNTING BRACKET Wall mounting bracket for use with filter/lubricator.

370

Part No.

Description

Shpg. Wt. (lbs.)

AFL60610WB

Miniature Wall Mount Bracket

0.1

AFL60611WB

Intermediate Wall Mount Bracket

0.1

AFL60612WB

Standard Wall Mount Bracket

0.1

AFL60613WB

Heavy-Duty Wall Mount Bracket

0.1

www.westwardtools.ca

2/8/10

2:35 PM

Page 371

AIR MANAGEMENT AIR FILTER-REGULATOR COMBO UNITS Air line filter and pressure regulator combination unit ideal for applications where space is limited. Modular design suitable for panel mounting. Maximum supply pressure 145 PSI (10 BAR) on models with polycarbonate bowl, 290 PSI (20 BAR) on models with metal bowl. Polycarbonate bowl models have steel bowl guards with sight glass. Metal bowls are recommended for use in environments containing chemicals, such as acetone, benzene, kerosene, gasoline, carbon tetrachloride, ethylene dichloride, toluene and/or air compressor systems using fire resistant lubricants.

• Maximum temperature 60° C/140° F. • Wall mounting bracket and external auto drain off valve available as accessories. Filters • Press type manual drain for easy operation. • Bronze filter element. • Separator and shield for efficient moisture separation. • Fitted with 40 micron filter. Regulator • Non-raising "press to lock" adjusting knob for locking at any set pressure. • Adjustment range: 7 – 145 PSI (0.5 – 10 BAR).

Maximum Flow Rate* Part No.

Description

Bowl Size

Height Width Shpg. Wt.

Port Size (in.)

(CFM)

(L/min)

(oz.)

(mL)

(in.)

(lbs.)

Miniature

1⁄4

550

0.3

6.69

1.57

1.2

1,800

1.08

8.66

2.17

1.2

Polycarbonate Bowl with Guard AFR60351C AFR60352C

Intermediate

1⁄4

AFR60353C

Intermediate

3⁄8

1,800

1.08

8.66

2.17

1.5

AFR60354C

Standard

1⁄2

106

3,000

1.5

11.02

2.76

1.5

AFR60355C

Heavy-Duty

3⁄4

149

4,250

5.6

165

14.6

3.54

2.5

AFR60356C

Heavy-Duty

193

5,500

5.6

165

14.6

3.54

2.7

AFR60380C

Miniature

1⁄4

800

0.3

4.53

1.57

2.0

AFR60381C

Intermediate

3⁄8

2,250

2.15

7.4

2.16

2.2

AFR60382C

Standard

1⁄2

125

3,500

3.0

8.82

2.75

2.5

AFR60383C

Heavy-Duty

3⁄4

175

5,000

5.6

165

10.43

3.54

3.0

AFR60384C

Heavy-Duty

230

6,500

5.6

165

10.43

3.54

3.2

Metal Bowl

*Inlet Pressure 105 PSI (7 BAR), Set Pressure 90 PSI (6 BAR), and Pressure Drop 15 PSI (1 BAR)

AUTO DRAIN VALVE For use with filter units for automatic moisture removal.

Part No.

Description

AF60620

Miniature Filter Auto Drain

Shpg. Wt. (lbs.) 0.1

AF60621

Intermediate Filter Auto Drain

0.1

AF60622

Standard Filter Auto Drain

0.1

PRESSURE GAUGES Part No.

Description

Shpg. Wt. (lbs.)

APG60635

Pressure Gauge,

NPT

0.1

APG60636

Pressure Gauge, 1⁄4" NPT

0.1

1⁄8"

www.westwardtools.ca

371

2/8/10

2:36 PM

Page 372

AIR MANAGEMENT

FILTER-REGULATOR-LUBRICATOR MODULAR 2 PIECE COMBO UNITS

Air line filter, pressure regulator and micromist lubricator combination unit ideal for applications where ease and fast maintenance is required. Suitable for wall mounting. Maximum supply pressure 145 PSI (10 BAR) on models with polycarbonate bowl, 290 PSI (20 BAR) on models with metal bowl. Polycarbonate bowl models have steel bowl guards with sight glass. Metal bowls are recommended for use in environments containing chemicals, such as acetone, benzene, kerosene, gasoline, carbon tetrachloride, ethylene dichloride, toluene and/or air compressor systems using fire resistant lubricants. • Maximum temperature 60° C/140° F. • Wall mounting bracket, spacers and piping adapters included. Filters Press type manual drain for easy operation. Bronze filter element. Separator and shield for efficient moisture separation. Fitted with 40 micron filter. Regulator Non-raising “press to lock” adjusting knob for locking at any set pressure. Adjustment range: 7 – 145 PSI (0.5 – 10 BAR). Lubricator Fog/micromist type, up to 50' pipe runs. Precision oil feed adjustment. Recommended oil: 32 grade.

Port Part No.

Description

Size (in.)

Maximum Flow Bowl Size Bowl Size Rate* Filter Lubricator Height

Width

Shpg. Wt.

(oz.)

(in.)

(lbs.)

500

0.3

0.68

6.69

5.75

3.0

(CFM) (L/min)

Polycarbonate Bowl with Guard AFRL60450C Miniature

1⁄4

AFRL60451C Miniature

3⁄8

1,250

1.08

1.93

8.66

7.17

3.4

AFRL60452C Intermediate

1⁄2

2,800

1.5

5.14

11.02

8.66

3.6

AFRL60453C Standard

3⁄4

123

3,500

11.0

6.8

14.6

10.63

3.8

AFRL60454C Heavy-Duty

140

4,000

11.0

6.8

14.6

10.63

4.0

Metal Bowl AFRL60480C Miniature

1⁄4

1,350

0.68

6.69

5.75

3.5

AFRL60481C Intermediate

3⁄8

106

3,000

3.38

10.43

7.17

3.7

AFRL60482C Standard

1⁄2

200

5,650

6.76

6.8

8.66

3.9

AFRL60483C Heavy-Duty

3⁄4

255

7,200

6.8

14.6

10.63

4.1

AFRL60484C Heavy-Duty

318

9,000

6.8

14.6

10.63

4.3

*Inlet Pressure 105 PSI (7 BAR), Set Pressure 90 PSI (6 BAR), and Pressure Drop 15 PSI (1 BAR)

372

www.westwardtools.ca

2/8/10

2:37 PM

Page 373

AIR MANAGEMENT FILTER-REGULATOR-LUBRICATOR MODULAR 3 PIECE COMBO UNITS

Port Part No.

Description

Maximum Flow Rate*

Bowl Size Bowl Size Filter Lubricator Height

Width

Shpg. Wt.

Size (in.)

(CFM)

(L/min)

(oz.)

(in.)

(lbs.)

Miniature

1⁄4

500

0.3

0.68

6.69

7.87

3.0

AFRL60551C

Miniature

3⁄8

2,000

1.08

1.93

8.66

9.84

4.0

AFRL60552C

Intermediate

1⁄2

125

3,500

1.5

5.14

11.02

3.6

AFRL60553C

Standard

3⁄4

123

3,500

5.6

6.8

14.6

3.8

AFRL60554C

Heavy-Duty

175

5,000

5.6

6.8

14.6

4.0

Miniature

1⁄4

500

0.3

0.68

6.69

7.87

3.5

AFRL60581C

Intermediate

3⁄8

2,000

2.15

3.38

10.43

9.84

3.7

AFRL60582C

Standard

1⁄2

125

3,500

6.76

3.9

AFRL60583C

Heavy-Duty

3⁄4

123

3,500

5.6

6.8

14.6

4.1

AFRL60584C

Heavy-Duty

175

5,000

5.6

6.8

14.6

4.3

Polycarbonate Bowl with Guard AFRL60550C

Metal Bowl AFRL60580C

*Inlet Pressure 105 PSI (7 BAR), Set Pressure 90 PSI (6 BAR) and Pressure Drop 15 PSI (1 BAR)

www.westwardtools.ca

373

2/8/10

2:38 PM

Page 374

HOSE REELS MANUAL LOW & HIGH PRESSURE HOSE REELS General purpose hose reels that easily mount to either vertical or horizontal surfaces. High quality steel mounting plate for mounting to bench-tops, walls, posts, beams or any other solid surface. A multi-position lock pin secures the hose at desired length. Manual Air & Water Hose Reel Features: • 25 mm steel gland tube frame construction. • Direct hand crank rewind design. • Brass swivel inlet machined from tube. • Nitrile swivel seats. Manual High Pressure Hose Reel Incorporates all the features of the air and water reel into a universal pressure washer hose reel that accommodates up to 3,000 PSI maximum pressure. Note: Inlet, water and pressure hose not included.

Part No.

Hose Capacity Hose Capacity Maximum Hose Outlet Hose Reel Inlet Length Width Height Shpg. I.D. (in.) (ft.) Pressure (PSI) (in.) NPTF (M) (in.) NPTF (F) (in.) (in.) (in.) Wt. (lbs.)

Manual Air & Water Hose Reel RHM38100L

3⁄8

100

300

3⁄8

153⁄4

111⁄4

131⁄4

11.0

3,000

3⁄8

111⁄4

6.2

3,000

3⁄8

153⁄4

111⁄4

131⁄4

13.2

Manual Pressure Washer Hose Reel RHM3850H

3⁄8

RHM38100H

3⁄8

50 100

MANUAL LOW PRESSURE HOSE REEL Industrial-duty hand crank hose reel designed for applications requiring longer lengths of low pressure air and water hoses. Spring loaded lock pin available to ensure hose does not unravel. Features: • Heavy gauge powder coated frame construction. • Direct hand crank rewind design. • Joint folded handle stops hose at desired length. • Wide “A” frame profile provides excellent stability.

Part No.

Dimensions (in.) Hose Capacity Hose Maximum NPTF (M) Hose NPTF (F) Reel Shpg. I.D. (in.) Capacity (ft.) Pressure (PSI) Outlet (in.) Inlet (in.) Length Width Height Wt. (lbs.)

Manual Air & Water Hose Reel RHM12150L

1⁄2

150

300

1⁄2

26.4

LIGHT INDUSTRIAL HOSE REELS These auto-retractable hose reels are ideal for all air and water hose requirements up to 300 PSI maximum working pressure. Corrosion-resistant powder coated finish allows reels to be used in a variety of environments. Wide L-shaped base has grooved gusset reinforcement to ensure stability and resistance to vibration. Four-direction, non-snag rollers reduce hose wear abrasion. • Spring is fully enclosed and lubricated. • Multi-position ratchet lock secures the hose at desired length. • Solid machined brass swivel prevents leakage. • Guide arm adjusts easily to allow multi-positional mounting for wall, floor or ceiling requirements. • Heavy-gauge steel base resists damage due to vibration.

Part No.

Hose Hose I.D. Length (ft.) (in.)

Maximum Hose Outlet Reel Inlet Pressure (in.) NPTF (in.) NPTF Dimensions Dimensions Dimensions (F) L (in.) W (in.) H (in.) (M) (PSI)

Shpg. Wt. (lbs.)

Auto Retractable Low Pressure (Air/Water) RHA3850L

3⁄8

300

3⁄8

161⁄2

51⁄4

171⁄4

29.4

RHA1250L

1⁄2

300

1⁄2

161⁄2

61⁄2

171⁄4

34.2

374

www.westwardtools.ca

2/8/10

2:40 PM

Page 375

HOSE REELS

HEAVY-DUTY INDUSTRIAL HOSE REELS Auto-retractable hose reels ideal for all air and water hose requirements up to 300 PSI maximum working pressure. Reinforced steel flange adds additional strength expected in an industrial-duty reel. Wide 7" L-shaped base has grooved gusset reinforcement to ensure stability and resistance to vibration. Four-direction, non-snag rollers reduce hose wear abrasion. • Spring is fully enclosed and lubricated. • Multi-position ratchet lock secures the hose at desired length. • Solid machined brass swivel prevents leakage. • Guide arm adjusts easily to allow multi-positioning mounting for wall, floor or ceiling requirements. • Heavy-gauge steel base resists damage due to vibration. Note: Inlet, water and pressure hose not included.

Part No.

Hose I.D. (in.)

Hose Length (ft.)

NPTF (M) Maximum Pressure Hose Outlet (in.) (PSI)

NPTF (F) Reel Inlet (in.)

Length

Width

Height

Shpg. Wt. (lbs.)

81⁄2

48.4

81⁄2

59.4

Dimensions (in.)

Auto Retractable Low Pressure (Air/Water) RHA3850LHD

3⁄8

RHA1250LHD

1⁄2

50 50

300

3⁄8

300

1⁄2

AUTO-RETRACTABLE STAINLESS STEEL HOSE REEL Heavy-duty stainless steel construction with electrolytic polishing. Ideal for food processing, washdown, chemical transfer and industrial solvent handling markets. Wide 7" L-shaped base with groove reinforcement ensures stable support. Multi-position guide arm permits wall, floor or ceiling mounts. • Full flow stainless shaft and swivel. • Spring fully enclosed and lubricated. • Multi-position ratchet lock and easy tension adjustment. • Four-direction, non-snag rollers.

Hose Part No.

Hose

Maximum

NPTF (M)

NPTF (F)

Dimensions (in.)

I.D. (in.) Length (ft.) Pressure (PSI) Hose Outlet (in.) Reel Inlet (in.) Length

Shpg. Wt.

Width

Height

(lbs.)

Low Pressure Reels RHA3850LSS

3⁄8

300

3⁄8

9.3

48.4

RHA1250LSS

1⁄2

300

3⁄8

9.3

48.4

High Pressure Reels RHA3850HSS

3⁄8

2,000

3⁄8

24.5

9.3

52.8

RHA1250HSS

1⁄2

2,000

3⁄8

24.5

9.3

52.8

www.westwardtools.ca

375

2/8/10

2:41 PM

Page 376

PUMPS STAINLESS STEEL LIFT PUMP Lift style drum pump fits all standard 45 gallon drums and pumps 22 oz. per stroke.

Part No.

Description

JW300S

Stainless Steel Lift Pump

Shpg. Wt. (lbs.) 13.0

CHROME LIFT PUMP Lift style drum pump fits all standard 45 gallon drums and pumps 22 oz. per stroke.

JW300S

Part No.

Description

Shpg. Wt. (lbs.)

JW300C

Chrome Lift Pump

13.0

OIL TRANSFER PUMP For oil based petroleum products. Cast iron body, steel inlet and outlet tubing with 2" bung adapter. Pumps 1 litre every 3.5 revolutions. JW300C

Part No.

Description

Shpg. Wt. (lbs.)

JW214

Oil Transfer Pump

13.0

JW214

BARREL TRANSFER PUMP Designed for quick transfer of petroleum based liquids. Fits 15 to 55 gallon drums. Zinc and chrome plated. Self adjusting telescopic suction tube. 101⁄2 oz. capacity per stroke. Self priming. 11⁄2" and 2" NPT bung nut. Removable spout is threaded for garden hose fittings. Cushioned vinyl handle.

Part No.

Description

Shpg. Wt. (lbs.)

TPB10

Barrel Transfer Pump

13.0

CHEMICAL TRANSFER PUMP Can be used for most “non-corrosive” petroleum products, agricultural and many industrial chemicals.

Part No.

Description

JW218

Chemical Transfer Pump

Shpg. Wt. (lbs.) 13.0

TPB10

JW218

376

www.westwardtools.ca

2/8/10

2:42 PM

Page 377

LUBRICATION HIGH VOLUME ROTARY PUMP • High volume output – 1 litre per revolution. • Heavy-duty construction, cast aluminum body, adjustable zincplated steel suction pipe, zinc-plated discharge spout, 1 meter plastic discharge hose, 2" bung adapter for drums and a replaceable pick-up filter. • Application range includes mineral based oils, machine oil to heavy crude, and volatile petroleum products such as gasoline and kerosene. • Capable of pumping up to 15 meters vertically and 50 meters horizontally.

Part No.

Description

PH1

High Volume Rotary Pump

Shpg. Wt. (lbs.) 26.0

PRESSURIZED WASTE OIL DRAIN Telescoping waste oil drain for motor and gear oil collection. Can be used under vehicle lifts or inside lubrication pits. Large handle for easy maneuverability. Includes two 3" brake casters and two swivel casters. Extra large drain bowl for safe fluid collection. Pressurized fluid extraction system with manual valve.

Part No.

Description

DPA80

Pressurized Oil Drain

Shpg. Wt. (lbs.) 79.4

SWING ARM WASTE OIL DRAIN Mobile waste oil drain with swing arm design for added versatility. Ideal for use with vehicle lifts or inside lubrication pits. Extra large fluid collection drain pan. Pressurized fluid evacuation utilizing standard shop air. Features automatic check valve. 80 L fluid holding capacity.

Part No.

Description

DPE80

Swing Arm Oil Drain

www.westwardtools.ca

Shpg. Wt. (lbs.) 55.0

377

2/8/10

2:43 PM

Page 378

LUBRICATION FLUID SUCTION TRANSFER PUMP Continuous fluid transfer, self priming. Two 48" flexible hoses. Lightweight aluminum housing.

Part No.

Capacity (oz.)

Shpg. Wt. (lbs.)

2.5

GT18

FLUID SUCTION GUN Holding capacity of 18 fluid ounces. Flexible 12" hose for use with transmission, differential or oil fluid services. Precision follower provides full suction. Comfort grip, powder coated finish.

Part No.

Capacity (oz.)

Shpg. Wt. (lbs.)

2.5

GS18

MANUAL OIL & GEAR LUBE PUMP Provides fast and clean refilling of differentials, gear cases and final drives. Ideally suited for delivering transmission fluid and heavier viscosity fluids. Fits full open 5 gallon bulk fluid pails. Durable cast aluminum alloy pump outlet body. Oven baked paint finish on cover resists corrosion. Includes pump, pail cover, and 4' of clear vinyl hose with curved discharge nozzle.

Part No.

Description

TPP20

Oil and Gear Lube Pump

Fits Container Size (gal.) Shpg. Wt. (lbs.) 5

5.0

BUCKET GREASER High pressure/high volume bucket grease pump. Develops 3,500 PSI. Delivers 1 oz. in 7 strokes. Complete with 22 lb. grease bucket, spring loader follower plate, 2.2 m rubber hose and coupler.

Part No.

Description

Shpg. Wt. (lbs.)

TPG22

High Volume Bucket Greaser

55.0

PORTABLE GREASING SYSTEM Portable grease system includes spring loaded pump assembly, drum cover, rubber lining follower plate, 1,500 mm of high pressure polyurethane hose and super gun. Delivers 1.2 gms per shot in high volume setting and develops 10,000 PSI in high pressure setting. Supplied with 5 kg. grease bucket.

378

Part No.

Description

TPG11

Portable Greasing System

Shpg. Wt. (lbs.) 45.0

www.westwardtools.ca

2/8/10

2:46 PM

Page 379

LUBRICATION

50:1 AIR OPERATED GREASE PUMPS Premier product with 50:1 pump ratio, designed for applications requiring volume greasing at high pressures. Precision engineered pump construction in steel with the air motor made out of aluminum. Supplied complete with drum cover, rubber lined follower plate, 7' (84") of high pressure grease hose, Z swivel and professional grease control valve.

Part No.

Description

Shpg. Wt. (lbs.)

TPGA50

For 25 - 50 lb. Drums

35.0

TPGA50D

For 25 - 50 lb. Drums with Dolly

45.0

TPGA120

For 120 lb. Drums with Dolly

49.0

3:1 AIR OPERATED LUBE OIL PUMPS Industrial-duty 3:1 ratio lube oil pump, designed for transferring fluids at 3 times the air inlet pressure. Precision engineered steel pump construction. Aluminum air motor is CNC machined to very close tolerances. Working air pressure 85 – 115 PSI. Use with oils up to SAE130 viscosity. Stub pump assembly includes 1" NPTF bung adapter.

Part No.

Description

TPA31

3:1 Lube Oil Stub Pump Assembly

Shpg. Wt. (lbs.) 35.0

GREASE CONTROL VALVE Grease control valve, 7,500 PSI. Complete with 6" steel extension and heavy-duty coupler. Inlet: 1⁄4" NPT (female).

Part No.

Description

TPG75CV

Grease Control Valve

Shpg. Wt. (lbs.) 2.2

BOOSTER GREASE CONTROL VALVE Booster grease control valve, 6,000 PSI – 10,000 PSI. Fitted with Z swivel. Complete with 6" steel extension and heavy-duty coupler. Inlet: 1⁄4" NPT (female).

Part No.

Description

TPG60CV

Grease Control Valve

www.westwardtools.ca

Shpg. Wt. (lbs.) 2.2

379

2/8/10

2:47 PM

Page 380

GREASE GUNS

LEVER TYPE ECONOMY GREASE GUN Medium-duty lever type grease gun. Black enamel housing with non-slip knurling. Posi-Lock follower rod with T-Handle. Easy filling in any position.

Lube Capacity Part No. Description

Nozzle

Loading Bulk (oz.) Cartridge (oz.) Extension (in.)

GG14LE Lever Type with Metal Handle

3-Way

Operating

Shpg.

Pressure (PSI)

Wt. (lbs.)

4,500

4.0

LEVER TYPE GREASE GUN – MEDIUM-DUTY Medium-duty lever type grease gun. Black enamel housing with non-slip knurling. Posi-Lock follower rod with T-Handle. Easy filling in any position.

Lube Capacity Part No. Description GG14L

Nozzle

Loading Bulk (oz.) Cartridge (oz.) Extension (in.)

Lever Type with Rubber Grip

3-Way

141⁄2

Operating

Shpg.

Pressure (PSI)

Wt. (lbs.)

4,500

4.0

HEAVY-DUTY LEVER GREASE GUN For use with 24 oz. bulk grease or standard 14 oz. grease cartridge. Variable stroke. Fitted with bulk loader and air release valve. Comes complete with 6" steel extension and coupler.

Part No.

Lube Capacity Bulk (oz.)

Lube Capacity Cartridge (oz.)

Nozzle Extension (in.)

Operating Pressure (PSI)

Shpg. Wt. (lbs.)

GG14HD

3-Way

10,000

4.5

LEVER TYPE GREASE GUN – EXTRA HEAVY-DUTY Extra heavy-duty construction. Durable cast iron gun head and chrome plated cartridge housing with non-slip knurled grip. Vinyl lever handle for operator comfort.

Nozzle

Operating

Shpg.

Part No.

Bulk (oz.)

Lube Capacity Cartridge (oz.)

Extension (in.)

Pressure (PSI)

Wt. (lbs.)

GG14LP

3-Way

4,500

4.0

380

www.westwardtools.ca

2/8/10

2:48 PM

Page 381

GREASE GUNS

PISTOL GRIP MINI GREASE GUN Mini grease gun kit, ideal for handling on the spot lube requirements. Conveniently stores in small spaces. All metal construction includes a 9" high pressure nylon hose with coupler, rigid metallic straight spout with coupler and extension for nylon hose. Ideal for trailers, boats, mowers, RV's, power tools, etc.

Lube Capacity Part No. GG3M

Nozzle

Operating

Shpg. Wt.

Bulk (oz.)

Cartridge (oz.)

Extension (in.)

Pressure (PSI)

(lbs.)

2-Way

2,900

1.5

PISTOL GRIP GREASE GUN – MEDIUM-DUTY Pistol grip grease gun with die-cast head. Includes 18" nylon flex hose and hydraulic coupler. One-hand operation. Heavy-duty steel chrome plated barrel and non-slip knurled grips. Posi-Lock follower rod with T-handle. Easy filling in any position.

Lube Capacity Part No. Description

Nozzle

Operating

Overall

Shpg.

Loading Bulk (oz.) Cartridge (oz.) Extension (in.) Pressure (PSI) Length (in.) Wt. (lbs.)

GG14PW Pistol Grip with Metal Handle

3-Way

18 Hose

4,500

151⁄2

4.0

HIGH VOLUME LEVER GREASE GUN Top of the line One Hand Pistol Grip grease gun with variable handle setting for high pressure/high volume applications. Grease gun head fitted with bulk loader. Comes complete with 18" flex hose and coupler. Develops 7,000 PSI in high pressure setting and dispenses twice the amount of grease compared to most other guns in high volume setting (approx. 1 oz. per 30 strokes). Drop resistant design for use with 14 oz. grease cartridge, bulk or suction fill. Threaded 1⁄8" NPT.

Part No.

Lube Capacity Cartridge (oz.)

Nozzle Extension (in.)

Operating Pressure (PSI)

Shpg. Wt. (lbs.)

GG14HV

3-Way

7,000

4.0

www.westwardtools.ca

381

2/8/10

2:49 PM

Page 382

GREASE GUNS

HIGH POWER AIR OPERATED GREASE GUN High power one shot air operated grease gun complete with 12" hose and coupler. Fitted with bulk loader. Delivers 1 oz. per 40 strokes. Develops 5,000 PSI pressure.

Part No. GG14AHP

Lube Capacity Bulk (oz.)

Lube Capacity Cartridge (oz.)

Nozzle Extension (in.)

Operating Pressure (PSI)

Shpg. Wt. (lbs.)

3-Way

5,000

6.1

360° ANGLE-FREE ROTATING GREASE GUN Angle-free finger grip and gun body allow for any angle of degree adjustment. Ideal for operating in a narrow space. Continuous operation air motor will automatically keep gun primed. Butterfly lock screw to hold gun position where required. • Heavy-duty spring for prime retention. • Cycles continuous grease flow with trigger depressed. • 40:1 pressure ratio. • Follower design eliminates grease bypass. • Special deep grip design provides non-slip operation.

Part No.

Description

GG14AC

360° Air Operated Grease Gun

Loading 3-Way

Max. Output Lube Capacity Pressure (PSI) Bulk (oz.) 6,000

Lube Capacity Cartridge (oz.)

Shpg. Wt. (lbs.)

4.0

AIR OPERATED GREASE GUN WITH FLEX HOSE Pistol grip air-operated with 12" flexible nylon hose. Three-way loading cartridge, bulk or transfer pump. Air bleeder valve and single shot operation.

Part No.

Description

GG14AW

Air-Powered Grease Gun

Loading 3-Way

Max. Output Lube Capacity Pressure (PSI) Bulk (oz.) 6,000

Lube Capacity Cartridge (oz.)

Shpg. Wt. (lbs.)

141⁄2

4.0

DISPOSABLE POCKET STYLE GREASE GUN A versatile push-type disposable grease gun for use in a variety of automotive, industrial and agricultural applications. Extremely compact size allows for use in tight hard-to-reach areas. Comes preloaded with 2 ounces of general purpose ball bearing grease. Universal grease connector fits all common grease nipples.

382

Part No.

Description

GG2

Grease Gun Push Type-Mini

Capacity (oz.)

Shpg. Wt. (lbs.)

0.2

www.westwardtools.ca

2/8/10

2:51 PM

Page 383

GREASE GUN ACCESSORIES GREASE FITTING UNBLOCKER Opens clogged grease fittings and loosens hardened grease joints. All steel construction designed to be tapped with a hammer to force light viscosity oil through the tool into the coupler and finally into the grease joint. Built-in hand guard. Includes flex hose for hard to reach areas.

Part No.

Description

Shpg. Wt. (lbs.)

GFU1

Grease Fitting Unblocker

0.3

HIGH PRESSURE GREASE SWIVEL Part No.

Description

TPG60S

High Pressure Swivel

Shpg. Wt. (lbs.) 0.3

7 PIECE QUICK CONNECT LUBRICATION ACCESSORY KIT A kit consisting of the most popular quick connect grease gun lubrication adapters and extensions. For use with all standard grease guns and lubrication dispensing meters. Includes 7 commonly used adapters; narrow needle nose, recessed lube adapter, angle lube adapter, quick connect seal off dispenser, quick connect right angled coupler, grease injector needle and quick connect hose. Durable terylene storage pouch keeps tools organized.

Part No.

Description

Shpg. Wt. (lbs.)

GG7K

7 Piece Lubrication Accessory Kit

2.0

GREASE GUN ACCESSORIES Part No.

Description

GGC1

6,000 PSI, 1⁄8" NPT For Hand Operated Grease Guns

Shpg. Wt. (lbs.) 0.1

GGC3J

7,500 PSI, 1⁄8" NPT For Hand and Air Operated Grease Guns

0.1

GGC3JS

7,500 PSI, 360° Swivel,

NPT

0.1

GN1

11⁄2" Needle Injector, 18 Gauge

0.1

GN2

11⁄2" Needle Nose Dispenser, 0.046" Tip

0.1

www.westwardtools.ca

1⁄8"

383

2/8/10

2:52 PM

Page 384

GREASE GUN ACCESSORIES 4-WAY GREASE FITTING TOOLS • For installing straight and angled grease fittings. • Hardened tap for re-tapping holes. • Screw extractor for removing worn and broken grease fittings.

Part No.

Description

GFT4

5⁄8"

& 3⁄8" Hex, 1⁄4"-28 Rethreader

Shpg. Wt. (lbs.) 0.2

GFT4NPT

3⁄8"

& 7⁄16" Hex, 1⁄8"-27 Rethreader

0.2

GREASE GUN WHIP HOSES Rubber grease gun whip hoses. 1⁄8 NPT(M) thread.

Part No. GGH12 GGH18

Length (in.)

Thread Size

Package Type Shpg. Wt. (lbs.)

1⁄8"

NPT

Bulk

0.3

1⁄8"

NPT

Bulk

0.3

HIGH PRESSURE GREASE HOSES • 5,800 PSI working pressure. • 13,775 PSI burst pressure. • For hand and air operated grease guns.

Part No. GGH12HP GGH18HP

Length (in.)

Thread Size

Shpg. Wt. (lbs.)

1⁄8"

NPT

0.3

1⁄8"

NPT

0.4

GREASE GUN HOLDER • Simple snap action clamp for safe storage of grease guns and suction guns. • Mounts on almost any surface. • Manufactured from heavy gauge steel sheet with zinc plated finish.

Part No.

Description

GGM1

For 21⁄4" Barrel Diameter

Shpg. Wt. (lbs.) 0.3

GENERAL PURPOSE STANDARD ASSORTMENT Part No. GFK101

384

Description

Shpg. Wt. (lbs.)

100 Piece, Fittings Only, SAE

1.5

GFK101M 100 Piece, Fittings Only, Metric

1.5

GFK60

60 Piece, SAE with 3 Couplers & Needle Nose Dispenser

1.5

GFK60M

60 Piece, Metric with 3 Couplers & Needle Nose Dispenser

1.5

www.westwardtools.ca

2/8/10

2:53 PM

Page 385

GREASE FITTINGS

SAE GREASE FITTING ASSORTMENTS Manufactured to the most stringent quality standards. Fitting profile and dimensions are accurately controlled to metric standards. 100 piece assortment includes 70 popular assorted grease fittings: 15 of 1⁄4"-28 SAE LT straight, 10 of 1⁄4"-28 SAE LT 45 degree, 10 of 1⁄4"-28 LT 90 degree, 15 of 1⁄8"-27 PTF Spl. short straight, 10 of 1⁄8"-27 PTF Spl. short 45 degree, 10 of 1⁄8"-27 PTF Spl. short 90 degree, and 30 protective caps 10 each red, black, yellow.

Part No.

Description

GFK100C

100 Piece Grease Fitting Assortment

Shpg. Wt. (lbs.) 0.3

METRIC GREASE FITTING ASSORTMENT Manufactured to the most stringent quality standards. Fitting profile and dimensions are accurately controlled to metric standards. 100 piece assortment includes 70 popular assorted grease fittings: 15 of M6 x 1 straight, 10 of M6 x 1 90 degree, 15 of M8 x 1 straight, 5 of M8 x 1 90 degree, 15 of M10 x 1 straight, 10 of M10 x 1 90 degree, and 30 protective caps 10 each red, black and yellow.

Part No. Description GFK100CM 100 Piece Metric Grease Fitting

Shpg. Wt. (lbs.) 0.3

Assortment

SAE STAINLESS STEEL GREASE FITTING ASSORTMENT 40 assorted stainless steel grease fittings in a convenient sturdy storage box with illustrated lid. Includes 10 each straight, 5-45°, and 5-90° of 1⁄4"-28 and 1⁄8" NPT. 303 stainless steel.

Part No.

Description

Shpg. Wt. (lbs.)

GFK40SS Stainless Grease Fitting Asst. 40 Piece

0.7

GREASE FITTING CAPS Colour coded grease fitting protective caps. Keep lubrication points clean and can be used for identification purposes.

Part No.

Description

Colour

Shpg. Wt. (lbs.)

GFCPR GFCPY

Grease Fitting Cap

Red

0.1

Grease Fitting Cap

Yellow

0.1

GFCPB

Grease Fitting Cap

Blue

0.1

www.westwardtools.ca

385

2/8/10

2:54 PM

Page 386

GREASE FITTING GREASE FITTINGS Part No.

Description

Thread

Length (in.)

Shpg. Wt. (lbs.)

Grease Fittings – Bulk

GF18NPTA45

GF18NPTA90

GF18NPTS

Straight

1⁄8"

NPT

21⁄32

0.1

GF18NPTA45

45°

1⁄8"

NPT

7⁄8

0.1

NPT

27⁄32

0.1

NPT

27⁄32

0.1

GF18NPTA65

65°

1⁄8"

GF18NPTA90

90°

1⁄8"

GF14NFS

Straight

1⁄4"-28

1⁄2

0.1

GF14NFA45

45°

1⁄4"-28

7⁄8

0.1

GF14NFA90

90°

1⁄4"-28

25⁄32

0.1

GF14NPTS

Straight

1⁄4"-18

7⁄8

0.1

GF14NPTA65

65°

1⁄4"-18

31⁄32

0.1

Part No.

Description

Thread

Length (mm)

Shpg. Wt. (lbs.)

Metric Grease Fittings – Bulk GF6SM

Straight

M6 X 1

0.1

GF6A45M

45°

M6 X 1

0.1

GF6A90M

90°

M6 X 1

0.1

GF8SM

Straight

M8 X 1

0.1

GF8A45M

45°

M8 X 1

0.1

GF8A90M

90°

M8 X 1

0.1

GF10SM

Straight

M10 X 1

0.1

GF10A45M

45°

M10 X 1

0.1

GF10A90M

90°

M10 X 1

0.1

Part No.

Description

Drive Dia. (in.)

Length (in.)

Shpg. Wt. (lbs.)

Straight

3⁄16

17⁄32

0.1

GFD14S

Straight

1⁄4

17⁄32

0.1

GFD516S

Straight

5⁄16

17⁄32

0.1

Thread

Length (in.)

Shpg. Wt. (lbs.)

Drive In Grease Fittings – Bulk GFD316S

GREASE FITTINGS – STAINLESS STEEL Part No.

Description

Stainless Steel Grease Fittings – Bulk

GF18NPTSS

Straight

1⁄8"

NPT

21⁄32

0.1

GF18NPTA45S

45°

1⁄8"

NPT

7⁄8

0.1

90°

1⁄8"

NPT

27⁄32

0.1

7⁄8

0.1

GF18NPTA90S

GF18NPTA45S

GF14NCSS

Straight

1⁄4"-18

GF14NFSS

Straight

1⁄4"-28

17⁄32

0.1

13⁄16

0.1

GF14NFA45S

45°

1⁄4"-28

GF14NFA90S

90°

1⁄4"-28

25⁄32

0.1

Part No.

Description

Drive Dia. (in.)

Length (in.)

Shpg. Wt. (lbs.)

Stainless Steel Drive In Grease Fittings – Bulk GF18NPTA90S

386

GFD316SS

Straight

3⁄16

17⁄32

0.1

GFD14SS

Straight

1⁄4

17⁄32

0.1

www.westwardtools.ca

W387-10.qxp

2/12/10

1:46 PM

Page 387

SPECIALTY TOOLS

O-Ring Kits. . . . . . . . . . . . . . . . . 388 Caulking Guns. . . . . . . . . . . . . . . 388 Filter Wrenches . . . . . . . . . . . . . 392 Testers . . . . . . . . . . . . . . . . 390-391 Battery Tools . . . . . . . . . . . . . . . 392 Tire Gauges . . . . . . . . . . . . . 395-396 Tire & Wheel Tools . . . . . . . . . . . 397 Body Shop Tools . . . . . . . . . . . . . 398

2/8/10

1:48 PM

Page 388

SPECIALTY TOOLS O-RING ASSORTMENTS • SAE set has 382 pieces and 30 sizes. • Metric set has 419 pieces and 30 sizes.

Part No.

Description

Shpg. Wt. (lbs.)

ORK382

Inch O-Ring Kit

1.7

ORK419M

Metric O-Ring Kit

1.7

RIVET GUN Industrial blind riveter with four nose pieces 3⁄32", 1⁄8", 5⁄32" and 3⁄16".

Part No.

Description

Shpg. Wt. (lbs.)

2002A

Hand Riveter

2.1

TWO-WAY HAND RIVETER Industrial, 2-way hand riveter adjustable to 90° and 180°. Sizes 3⁄32", 1⁄8", 5⁄32", 3⁄16".

Part No.

Description

8000

Two-Way Hand Riveter

Shpg. Wt. (lbs.) 2.1

HEAVY-DUTY SWIVEL HEAD HAND RIVETER Heavy-duty hand riveter with swivel head and nose pieces, sizes 3⁄32", 1⁄8", 5⁄32", and 3⁄16".

Part No.

Description

9000

Swivel Head Rivet Tool

Shpg. Wt. (lbs.) 2.6

CAULKING GUNS GC9S

GC9

388

• Heavy-duty steel one-piece skeleton design saves space in toolboxes and on the shelf. • Half-body guns allow for cartridges to be dropped in to improve job speed and ease of use. • Durable powder coated finish.

Part No.

Description

Shpg. Wt. (lbs.)

GC9

Caulking Gun 9"

1.4

GC9S

Caulking Gun Skeleton Type 9"

1.1

GC13

Caulking Gun 13"

1.8

GC13S

Caulking Gun Skeleton Type 13"

2.1

www.westwardtools.ca

2/8/10

1:53 PM

Page 389

SPECIALTY TOOLS PERFORATED STEEL STRAPPING Perforated steel strapping, 3⁄4" x 10' (3.05 m), 24 gauge steel.

Part No.

Description

PRFS34

24 Gauge Steel Strapping

Shpg. Wt. (lbs.) 2.1

HOSE NOZZLE • Adjustable brass head with protector. • Metal trigger.

Part No.

Description

YT1

Water Hose Nozzle

Shpg. Wt. (lbs.) 0.6

HOSE NOZZLE • 6 pattern hose nozzle. • Shower/soaker/jet spray/cone spray/flat spray/mist patterns. • Metal trigger.

Part No.

Description

YT2

Water Hose Nozzle

Shpg. Wt. (lbs.) 0.4

PARTS CLEANING BRUSHES Part No.

Description

Shpg. Wt. (lbs.)

A14

Synthetic

0.3

A88

Natural Fibre

0.3

PARTS WASHER BRUSH Tube allows solvent to flow through brush onto work.

Part No.

Description

A150

Parts Washer Brush

Shpg. Wt. (lbs.) 0.8

3 PIECE BRUSH SET Three piece all-purpose brush set includes, stainless, carbon, and brass brushes.

Part No.

Description

A153

3 Piece Set

Shpg. Wt. (lbs.) 0.3

4 PIECE PLASTIC FUNNEL SET Part No.

Description

FU4K

4 Piece Funnel Set

www.westwardtools.ca

Shpg. Wt. (lbs.) 1.2

389

2/8/10

1:54 PM

Page 390

TESTERS ANTIFREEZE/COOLANT TESTER (ETHYLENE GLYCOL BASED) • Tests general automotive antifreeze that is ethylene glycol based. • Tests hot and cold. • Protection is measured by the number of disks floating within the sample.

Part No.

Description

A31

Antifreeze Tester

Shpg. Wt. (lbs.) 0.8

ANTIFREEZE TESTER (PROPYLENE GLYCOL BASED) • Tests antifreeze used in recreational vehicles and plumbing applications that are propylene glycol based. • Tests hot and cold. • Protection is measured by the number of disks floating within the sample.

Part No.

Description

A33

Antifreeze Tester

Shpg. Wt. (lbs.) 0.8

ANTIFREEZE TESTER • Tests ethylene glycol solutions with radiator hot or cold. • Two scale show “Freezing Point of Radiator Solution” and “Boiling Point of Summer Coolant”. • Helps prevent radiators from freezing up and boiling over.

Part No.

Description

A22

Antifreeze Tester

Shpg. Wt. (lbs.) 0.4

BATTERY TESTERS Part No. A32 (Disc Type) Battery state of charge determined by the number of discs floating within the electrolyte sample. For example: • 0 discs floating: discharged. • 2 discs floating: battery charge over 50%. • 4 discs floating: fully charged. Part No. A23 (Conventional) Accurately tests state of charge of automotive batteries.

390

Part No.

Description

A32

Battery Tester Disc Type

Shpg. Wt. (lbs.) 0.5

A23

Battery Tester Conventional

0.2

www.westwardtools.ca

2/8/10

1:55 PM

Page 391

TESTERS TEST LIGHT For use with 6 and 12 volt systems.

Part No.

Description

TICO602

Shpg. Wt. (lbs.)

Test Light

0.2

TICO602B

Replacement Bulb

0.1

LED POWER/GROUND CIRCUIT TESTER • • • •

6/12/24 volts. Heavy-duty ground clip. 1.5 m / 5 ft. heavy-duty rubber insulated lead wire. LED indicator (red) positive (green) negative polarity.

Part No.

Description

TICO608

LED Circuit Tester

Shpg. Wt. (lbs.) 0.3

PROFESSIONAL CIRCUIT TESTER Heavy-duty pliable cord, shielded clip, cord protector.

Part No.

Description

Shpg. Wt. (lbs.)

TICO605

Voltage Tester

0.2

STRAP TYPE OIL FILTER WRENCH • Nylon strap allows quick adjustments. • Fits spin-on filters up to 6" (150 mm). • Use with 1⁄2" drive ratchet.

Part No.

Description

A121

Strap Type Oil Filter Wrench

Shpg. Wt. (lbs.) 0.7

CUP TYPE OIL FILTER WRENCHES Use with 3⁄8" drive ratchet.

Part No.

Description

FWP74

For 74/76 mm Oil Filters, 15 Flutes

0.3

FWP95

For 95 mm Oil Filters, 15 Flutes

0.4

FWP65

For 65 mm Oil Filters, 14 Flutes

0.3

www.westwardtools.ca

Shpg. Wt. (lbs.)

391

2/8/10

1:58 PM

Page 392

OIL FILTER WRENCHES SWIVEL GRIP OIL FILTER WRENCHES • Models feature swivel handle and a durable 1" wide stainless steel band. • Swivel handle turns filters even in hard to reach locations. • Vinyl covered handle provides a firm comfortable grip.

Part No.

Description

Shpg. Wt. (lbs.)

FW1

For 27⁄8" to 31⁄4" (73 mm to 83 mm) Oil Filters

0.7

FW2

For

FW3

For 41⁄8" to 41⁄2" (104 mm to 112 mm) Oil Filters

0.9

FW4

For 45⁄16" to 43⁄4" (110 mm to 121 mm) Oil Filters

1.0

FW5

For

31⁄2"

51⁄4"

37⁄8"

53⁄4"

(89 mm to 98 mm) Oil Filters

0.8

(133 mm to 146 mm) Oil Filters

1.2

ADJUSTABLE OIL FILTER WRENCH PLIERS • Designed for screw on oil filters. • Pliers provide a secure grip.

Part No.

Length (in.)

Shpg. Wt. (lbs.)

FWP10

1.3

FWP9

1.1

CHAIN TYPE OIL FILTER WRENCH • Grips most sizes of oil filters. • Needs only 4 cm clearance. • Tooth design by the body edge offers higher gripping power.

Part No.

Description

FWC1

Shpg. Wt. (lbs.)

Heavy-Duty Oil Filter Wrench

1.2

BATTERY POST & TERMINAL CLEANER Part No.

Description

400

Terminal Cleaner

Shpg. Wt. (lbs.) 0.2

3-WAY BATTERY TOOL Part No.

Description

A11

Terminal Cleaner

Shpg. Wt. (lbs.) 0.2

BATTERY TERMINAL PULLER • For removing worn terminal leads from batteries. • Jaw spread 21⁄2", depth 2".

392

Part No.

Description

A24

Puller

Shpg. Wt. (lbs.) 0.2

www.westwardtools.ca

2/8/10

2:01 PM

Page 393

SPECIALTY TOOLS

BATTERY CARRYING STRAP • For use with top terminal automotive batteries. • Positive grip utilizes batteries weight to secure battery during transport. • Easily stores in mechanics tool box.

Part No.

Description

Shpg. Wt. (lbs.)

A108

Battery Strap

0.3

ADJUSTABLE BATTERY CARRIER • • • •

One size instantly adjusts to fit all top and side terminal automotive batteries. Grips securely without damaging the battery. Lifts and removes batteries from inside or out of vehicle. Comfort safety grip ribbed handle.

Part No.

Description

Shpg. Wt. (lbs.)

A120

Battery Carrier

4.0

COMPRESSION TESTER Flexible hose for easy access; 14 mm and 18 mm threads; long reach adapter; side mounted pressure relief valve; 23⁄4" easy to read scale – 0 – 300 PSI and 0 – 21 kg/cm2.

Part No.

Description

A12

Compression Tester

Shpg. Wt. (lbs.) 0.4

ENGINE & AUTOMATIC TRANSMISSION OIL EXTRACTOR • Extracts oil without having to remove oil drain plug or the transmission oil pan. • For automatic transmission oil, power steering pump oil, differential oil, engine oil. • Use when car has stopped running but engine is still hot, oil temperature at about 68° C. • 6.5 litre capacity.

Part No.

Description

Shpg. Wt. (lbs.)

A64

Oil Extractor

2.3

BEARING RACE & SEAL DRIVER Installs bearing race quickly. Helps reduce damage to seals and bushings. Six adapters fit most applications. High impact case.

Part No.

Description

Shpg. Wt. (lbs.)

A28

Seal Driver Kit

1.2

www.westwardtools.ca

393

2/8/10

2:03 PM

Page 394

SPECIALTY TOOLS

BUSHING DRIVER SET • 16 piece set including drivers and 7 adapters from 3⁄8" to 11⁄4" size. • 7⁄16", 1⁄2", 5⁄8", 11⁄16", 13⁄16", 7⁄8", 15⁄16", 1", 11⁄16", 11⁄8", 13⁄16", 11⁄4" thin wall 5⁄8".

Part No.

Description

Shpg. Wt. (lbs.)

A99

16 Piece Set

3.2

BEARING PACKER Heavy-duty construction. Accommodates most roller and ball bearings. Quickly and thoroughly packs bearings with new grease while forcing out old grease all in one easy operation.

Part No.

Description

Shpg. Wt. (lbs.)

A26

Bearing Packer

0.3

PULLEY REMOVER & INSTALLER • 2-in-1 tool removes and installs power steering, water pump, vacuum pump, and alternator pulleys. • Works on pulleys with grooved hub diameters of 11⁄8", 11⁄4", 15⁄16", and 13⁄8". • Features a two-sided flange which fits all domestic vehicles including early GM, Chrysler and Ford.

Part No.

Description

Shpg. Wt. (lbs.)

A67

Pulley Remover/Installers

0.8

SLIDE HAMMER PULLER SET Reversible jaw slide hammer kit is ideal for removing oil seals bearings and other parts. Includes 2 and 3 way cross head.

Part No.

Description

GPSK5

Slide Hammer Puller Set

Shpg. Wt. (lbs.) 8.0

SEPARATORS

394

Part No.

Description

Ball Joint Separator

Shpg. Wt. (lbs.) 0.9

A10

Tie Rod Separator

0.9

www.westwardtools.ca

2/8/10

2:05 PM

Page 395

TIRE GAUGES DUAL PENCIL HEAD TYPE TIRE GAUGE Pencil type tire gauge with zinc alloy head and brass tube for corrosion resistance. Features four sided plastic measurement bar. ABS outer cover with pocket clip.

Part No. Description

Shpg. Wt. (lbs.)

TG50PN Dual Head Pencil Gauge, 10 – 50 PSI

0.1

POCKET TYPE TIRE GAUGE Calibration: 5 to 50 PSI (0.5 to 3.4 kg/cm2).

Part No. Description TG50S

Shpg. Wt. (lbs.)

5 - 50 PSI (0.5 - 3.4 kg/cm2)

0.2

POCKET TYPE TIRE GAUGE Part No. Description TG50P TG120P

Shpg. Wt. (lbs.)

6 - 50 PSI (0.5 - 3.4 kg/cm2) 10 - 120 PSI (0.7 - 8.4

0.1

kg/cm2)

0.1

DIAL TYPE TIRE GAUGE Calibration: 10 to 100 PSI (0.7 to 7 kg/cm2). • Angled, single head chuck. • Easy to read dial.

Part No. Description TGD100

Shpg. Wt. (lbs.)

Dial Tire Gauge 10 - 100 PSI

0.4

DUAL HEAD TYPE TIRE GAUGE Zinc alloy head and body with black matte housing and chrome plated friction ring provide corrosion resistance. Acrylic lens and easy to read dial. 0 – 100 PSI, 0 – 7 kg/cm2.

Part No.

Shpg. Wt. (lbs.)

Description

TGD100D Dial Tire Gauge, 0 - 100 PSI (0.7 kg./cm2)

0.3

DUAL HEAD POCKET TYPE TIRE GAUGE FOR TRUCKS Calibration: 10 to 150 PSI (1 to 11 kg/cm2).

Part No. Description TGT150

Shpg. Wt. (lbs.)

Dual Head Truck Gauge

0.5

DUAL HEAD POCKET TYPE TIRE GAUGE Calibration: 10 to 120 PSI (0.8 to 8.2 kg/cm2).

Part No. Description TG120

Dual Head Service Gauge

www.westwardtools.ca

Shpg. Wt. (lbs.) 0.4

395

2/8/10

2:06 PM

Page 396

TIRE GAUGES

DUAL HEAD CHUCK 1⁄4" FEMALE N.P.T. Part No. Description ATA26

Shpg. Wt. (lbs.)

Dual Head Air Chuck

0.6

HANDHELD DIGITAL TIRE INFLATOR Heavy-duty handheld digital inflator features clear, easy-to-read 28 mm digital backlit LCD display. High precision pressure sensor provides accurate pressure measurement. Long-life battery with low battery warning light. Clip on air chuck. • Protective rubber cover. • Digital display reset. • Deflation valve in handle. • Take readings in PSI, BAR, kPa.

Part No.

Air Inlet NPT(F) (in.)

Hose Capacity (in.)

Reading Accuracy (PSI/kPa)

Maximum Inlet Pressure (PSI/kPa)

Inflation Range (PSI/kPa)

Shpg. Wt. (lbs.)

TGE250F

1⁄4

3⁄8

0.1/1

250/1,700

0 - 100/700

3.0

DIGITAL TIRE PRESSURE GAUGE WITH LED LIGHT Easy to read digital LCD display for precise pressure measurement. Incorporates a thread depth measurement device to assist in determining premature tire wear. Auto shut-off increases battery life.

Part No.

Description

Shpg. Wt. (lbs.)

TGE99

Digital Tire Gauge, 5 - 99 PSI

0.1

DIGITAL TIRE PRESSURE GAUGE Precision air pressure measurement and easy to read LCD display. Simple one button operation. Self calibrating provides accurate measurement from 5 – 99 PSI, ± 0.5 PSI at 75° F. Illuminated LCD display with auto shut-off. Replaceable long life lithium battery.

Part No.

Description

TGE99M

Shpg. Wt. (lbs.)

Digital Tire Gauge, 5 - 99 PSI

0.3

DUAL HEAD TRUCK TIRE GAUGE Heavy-duty design. Features thumb control for user comfort. Rubber hose extension for hard to reach valves in dual wheels. Rustproof brass valve assembly. Calibration: 0 to 120 PSI.

Part No. Description TGT120

396

Dual Head Inflator

Shpg. Wt. (lbs.) 0.5

www.westwardtools.ca

2/8/10

2:08 PM

Page 397

TIRE TOOLS POCKET TYPE TIRE TREAD DEPTH GAUGE Calibration: 0 to 26 mm, 1 mm increments.

Part No. Description TG26M

Shpg. Wt. (lbs.)

Pocket Tread Depth Gauge

0.2

TIRE VALVE REPAIR TOOL Rethreads inside of valve stem.

Part No. Description A124

Shpg. Wt. (lbs.)

Valve Repair Tool

0.1

TIRE VALVE REPAIR/INSTALLER TOOL • Rethreads inside and outside of valve stem. • Inserts, tightens or removes valve core. • All steel plated to resist corrosion.

Part No. Description A123

Shpg. Wt. (lbs.)

Valve Repair Tool

0.1

4-WAY WHEEL WRENCHES Part No. A91 A92

Size 19 mm,

3⁄4", 13⁄16", 7⁄8"

7⁄8", 15⁄16",

1", 11⁄16"

Length 20" x

Shpg. Wt. (lbs.)

5⁄8"

3.3

25" x 3⁄4"

3.8

7 PIECE DOLLY & HAMMER BODY SET Includes finishing and grooving hammer, pick and finishing hammer, bumping hammer (checkered), universal dolly, square dolly, wedge dolly, and heel dolly.

Part No.

Description

BRK7

7 Piece Body Tool Set

www.westwardtools.ca

Shpg. Wt. (lbs.) 12.0

397

2/8/10

2:10 PM

Page 398

BODY SHOP TOOLS BODY SHOP DOLLIES Part No.

Description

BDU

Shpg. Wt. (lbs.)

Universal Dolly

2.0

BDS

Square Dolly

2.1

BDW

Wedge Dolly

2.3

BDH

Heel Dolly

2.1

PICK & FINISHING HAMMER WITH HICKORY HANDLE Part No.

Description

HBP12

Pick and Finishing Hammer

Shpg. Wt. (lbs.) 1.3

CHECKERED BUMPING HAMMER WITH HICKORY HANDLE Part No.

Description

HBB12

Checkered Bumping Hammer

Shpg. Wt. (lbs.) 1.3

FINISHING & GROOMING HAMMER WITH HICKORY HANDLE Part No.

Description

Shpg. Wt. (lbs.)

HBG12

Finishing and Grooming Hammer

1.3

PLASTIC FILLER FILES Part No.

Description

Shpg. Wt. (lbs.)

AB3

Flat File

0.2

AB4

Half Round File

0.2

16" PLASTIC SANDING BOARD Part No.

Description

SB16

Body Sanding Board

Shpg. Wt. (lbs.) 1.5

17" WOODEN SANDING BOARD

398

Part No.

Description

SB17

Body Sanding Board

Shpg. Wt. (lbs.) 1.8

www.westwardtools.ca

W399-W404-10-EN.qxp

2/9/10

11:38 AM

Page 399

3/4" x 66' PVC Electrical Tape Battery Post & Terminal Cleaner Double Flaring Tool Kit 5/8" Tubing Cutter 1/8" - 1 1/8" Tubing Cutter 3/16" - 1 1/4" Tube Cutter 1/4" - 2 5/8" Tube Cutter 1/2" Impact Driver with Bits 16 oz. Ball Pein Hammer, Hickory Handle 3lb Club Hammer Heavy Duty Hacksaw 8" Slip Joint Pliers 10" Water Pump Pliers 0 - 1" Micrometer 0 - 6" Dial Caliper 6" Rigid Steel Ruler 16 oz. Claw Hammer 8 oz. Fibregalss Handle Ball Pein Hammer 16 oz. Fibregalss Handle Ball Pein Hammer 24 oz. Fibregalss Handle Ball Pein Hammer 32 oz. Fibregalss Handle Ball Pein Hammer 40 oz. Fibregalss Handle Ball Pein Hammer Magnetic Pickup Tool Tie Rod Separator 3-Way Battery Tool Compression Tester 6" Oil Filter Wrench Mechanics Stethoscope Parts Cleaning Brush 9" All Purpose Wire Stripper & Crimper 6" Pocket Ruler 5/8" Tapered Brass Punch Antifreeze Tester Battery Tester Battery Terminal Puller Telescopic Magnetic Retrieving Tool 11" Gasket Scraper 8-1/4" Gasket Scraper 8" Scratch Awl 9" Cotter Pin Puller Telescopic Circular Mirror Radiator Hose Remover 16" Flexible Magnetic Pick-up Tool & Light 10" Adjustable Wrench 175 pc. Terminal Assortment 12" Light Weight Adj. Wrench w/Comfort Grip 10" Premium Adjustable Wrench 12" Premium Adjustable Wrench 15" Premium Adjustable Wrench 8" Premium Adjustable Wrench 12" Economy Bolt Cutters Blow Gun Rubber and Plastic Hose Cutter 3/8" Crowsfoo+C53t Wrench, 3/8" Dr. 3/8" Dr. Crowsfoot Wrench, 7/16" 3/8" Dr. Crowsfoot Wrench, 1/2" 3/8" Dr. Crowsfoot Wrench, 9/16" 3/8" Dr. Crowsfoot Wrench, 5/8" 3/8" Dr. Crowsfoot Wrench, 11/16" 3/8" Dr. Crowsfoot Wrench, 3/4" 3/8" Dr. Crowsfoot Wrench, 7/8" 7mm Raised Panel Combination Wrench 8mm Raised Panel Combination Wrench 9mm Raised Panel Combination Wrench 10mm Raised Panel Combination Wrench 11mm Raised Panel Combination Wrench 12mm Raised Panel Combination Wrench 13mm Raised Panel Combination Wrench 14mm Raised Panel Combination Wrench 15mm Raised Panel Combination Wrench 16mm Raised Panel Combination Wrench 17mm Raised Panel Combination Wrench 18mm Raised Panel Combination Wrench 19mm Raised Panel Combination Wrench 20mm Raised Panel Combination Wrench 21mm Raised Panel Combination Wrench 22mm Raised Panel Combination Wrench 23mm Raised Panel Combination Wrench 24mm Raised Panel Combination Wrench 7mm Fully Polished Combination Wrench 1/4" Fully Polished Combination Wrench 8mm Fully Polished Combination Wrench 9mm Fully Polished Combination Wrench 5/16" Fully Polished Combination Wrench 10mm Fully Polished Combination Wrench 11mm Fully Polished Combination Wrench

www.westwardtools.ca

•

• • • • • • •

•

• • • •

•

• • •

• •

•

• • • • • • • •

•

• • • • • •

• • •

•

• • • •

• • •

• •

• • • • • • • • • •

• • • • • • • • • • • • • • • • • •

•

• • • • • • • • • • • • • • • •

• •

•

• • • • •

•

• • • • •

• •

• • •

•

• • • • •

• • • • • • • • • • • • • • • • • • • • • • • • •

• • • •

• • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

WSW No. Description CP12 CP12M CP13M CP14 CP14M CP15M CP16 CP16M CP17M CP18 CP18M CP19M CP20 CP20M CP21M CP22 CP22M CP23M CP24 CP24M CP25M CP26 CP27M CP28 CP30 CP30M CP32 CP32M CP34 CP36 CP40 CR07M CR08 CR08M CR09M CR10 CR10M CR10SM CR11M CR11SM CR12 CR12M CR12S CR12SM CR13M CR13SM CR14 CR14M CR14S CR14SM CR15M CR16 CR16M CR16S CR17M CR17SM CR18 CR18M CR18S CR19M CR19SM CR20 CR20M CR20S CR21M CR22 CR22M CR22S CR23M CR24 CR24M CR24S CR26 CR28 CR30 CR32 CR34 CR36 CR40 CW200 CW201 CW202 CW203 CW204 CW205 CW206

3/8" Fully Polished Combination Wrench 12mm Fully Polished Combination Wrench 13mm Fully Polished Combination Wrench 7/16" Fully Polished Combination Wrench 14mm Fully Polished Combination Wrench 15mm Fully Polished Combination Wrench 1/2" Fully Polished Combination Wrench 16mm Fully Polished Combination Wrench 17mm Fully Polished Combination Wrench 9/16" Fully Polished Combination Wrench 18mm Fully Polished Combination Wrench 19mm Fully Polished Combination Wrench 5/8" Fully Polished Combination Wrench 20mm Fully Polished Combination Wrench 21mm Fully Polished Combination Wrench 11/16" Fully Polished Combination Wrench 22mm Fully Polished Combination Wrench 23mm Fully Polished Combination Wrench 3/4" Fully Polished Combination Wrench 24mm Fully Polished Combination Wrench 25mm Fully Polished Combination Wrench 13/16" Fully Polished Combination Wrench 27mm Fully Polished Combination Wrench 7/8" Fully Polished Combination Wrench 15/16" Fully Polished Combination Wrench 30mm Fully Polished Combination Wrench 1" Fully Polished Combination Wrench 32mm Fully Polished Combination Wrench 1-1/16" Fully Polished Combination Wrench 1-1/8" Fully Polished Combination Wrench 1-1/4" Fully Polished Combination Wrench 7mm Raised Panel Drop Forged Comb. Wrench 1/4" Raised Panel Drop Forged Comb. Wrench 8mm Raised Panel Drop Forged Comb. Wrench 9mm Raised Panel Drop Forged Comb. Wrench 5/16" Raised Panel Drop Forged Comb. Wrench 10mm Raised Panel Drop Forged Comb. Wrench 10mm Fully Polished Stubby Comb. Wrench 11mm Raised Panel Drop Forged Comb. Wrench 11mm Fully Polished Stubby Comb. Wrench 3/8" Raised Panel Drop Forged Comb. Wrench 12mm Raised Panel Drop Forged Comb. Wrench 3/8" Fully Polished Stubby Comb. Wrench 12mm Fully Polished Stubby Comb. Wrench 13mm Raised Panel Drop Forged Comb. Wrench 13mm Fully Polished Stubby Comb. Wrench 7/16" Raised Panel Drop Forged Comb. Wrench 14mm Raised Panel Drop Forged Comb. Wrench 7/16" Fully Polished Stubby Comb. Wrench 14mm Fully Polished Stubby Comb. Wrench 15mm Raised Panel Drop Forged Comb. Wrench 1/2" Raised Panel Drop Forged Comb. Wrench 16mm Raised Panel Drop Forged Comb. Wrench 1/2" Fully Polished Stubby Comb. Wrench 17mm Raised Panel Drop Forged Comb. Wrench 17mm Fully Polished Stubby Comb. Wrench 9/16" Raised Panel Drop Forged Comb. Wrench 18mm Raised Panel Drop Forged Comb. Wrench 9/16" Fully Polished Stubby Comb. Wrench 19mm Raised Panel Drop Forged Comb. Wrench 19mm Fully Polished Stubby Comb. Wrench 5/8" Raised Panel Drop Forged Comb. Wrench 20mm Raised Panel Drop Forged Comb. Wrench 5/8" Fully Polished Stubby Comb. Wrench 21mm Raised Panel Drop Forged Comb. Wrench 11/16" Raised Panel Drop Forged Comb. Wrench 22mm Raised Panel Drop Forged Comb. Wrench 11/16" Fully Polished Stubby Comb. Wrench 23mm Raised Panel Drop Forged Comb. Wrench 3/4" Raised Panel Drop Forged Comb. Wrench 24mm Raised Panel Drop Forged Comb. Wrench 3/4" Fully Polished Stubby Comb. Wrench 13/16" Raised Panel Drop Forged Comb. Wrench 7/8" Raised Panel Drop Forged Comb. Wrench 15/16" Raised Panel Drop Forged Comb. Wrench 1" Raised Panel Drop Forged Comb. Wrench 1-1/16" Raised Panel Drop Forged Comb. Wrench 1-1/8" Raised Panel Drop Forged Comb. Wrench 1-1/4" Raised Panel Drop Forged Comb. Wrench 3/8" Raised Panel Combination Wrench 7/16" Raised Panel Combination Wrench 1/2" Raised Panel Combination Wrench 9/16" Raised Panel Combination Wrench 5/8" Raised Panel Combination Wrench 11/16" Raised Panel Combination Wrench 3/4" Raised Panel Combination Wrench

SKC110 SKC158 SKC213 SKC250 SKC300 SKC330 SKC500 SKC600 SKC650 SKC700

WSW No. Description 101 400 495 716 717 733 734 2800 7116 9300 20W 500-8 510-10 5LD47 5LD57 6JR91 9016M 9108M 9116M 9124M 9132M 9140M A1 A10 A11 A12 A121 A13 A14 A2 A20 A21 A22 A23 A24 A3 A4 A5 A6 A7 A78 A8 A85 AG10 AK3 AL12 AP10 AP12 AP15 AP8 BC12 BG2 C1 CF200 CF201 CF202 CF203 CF204 CF205 CF206 CF208 CM07 CM08 CM09 CM10 CM11 CM12 CM13 CM14 CM15 CM16 CM17 CM18 CM19 CM20 CM21 CM22 CM23 CM24 CP07M CP08 CP08M CP09M CP10 CP10M CP11M

SKC110 SKC158 SKC213 SKC250 SKC300 SKC330 SKC500 SKC600 SKC650 SKC700

TOOL KIT CONTENTS

•

• •

•

• • •

• • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

•

• •

•

• •

•

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • •

399

W399-W404-10-EN.qxp

2/9/10

11:38 AM

Page 400

400

13/16" Raised Panel Combination Wrench 7/8" Raised Panel Combination Wrench 15/16" Raised Panel Combination Wrench 1" Raised Panel Combination Wrench 1-1/16" Raised Panel Combination Wrench 1-1/8" Raised Panel Combination Wrench 1-1/4" Raised Panel Combination Wrench 1-5/16" Raised Panel Combination Wrench 1-3/8" Raised Panel Combination Wrench 1-7/16" Raised Panel Combination Wrench 1-1/2" Raised Panel Combination Wrench 1-5/8" Raised Panel Combination Wrench 1-3/4" Raised Panel Combination Wrench 1-7/8" Raised Panel Combination Wrench 2" Raised Panel Combination Wrench 1/2" Dr. 6pt Deep Socket 10mm 1/2" Dr. 6pt Deep Socket 11mm 1/2" Dr. 6pt Deep Socket 12mm 1/2" Dr. 6pt Deep Socket 13mm 1/2" Dr. 6pt Deep Socket 14mm 1/2" Dr. 6pt Deep Socket 15mm 1/2" Dr. 6pt Deep Socket 16mm 1/2" Dr. 6pt Deep Socket 17mm 1/2" Dr. 6pt Deep Socket 18mm 1/2" Dr. 6pt Deep Socket 19mm 1/2" Dr. 6pt Deep Socket 20mm 1/2" Dr. 6pt Deep Socket 21mm 1/2" Dr. 6pt Deep Socket 22mm 1/2" Dr. 6pt Deep Socket 23mm 1/2" Dr. 6pt Deep Socket 24mm 1/2" Dr. 6pt Deep Socket 25mm 1/2" Dr. 6pt Deep Socket 26mm 1/2" Dr. 6pt Deep Socket 27mm 1/2" Dr. 6pt Deep Socket 28mm 1/2" Dr. 6pt Deep Socket 29mm 1/2" Dr. 6pt Deep Socket 30mm 1/2" Dr. 6pt Deep Socket 32mm 1/4" Dr. 6pt Deep Socket 4mm 1/4" Dr. 6pt Deep Socket 5mm 1/4" Dr. 6pt Deep Socket 6mm 1/4" Dr. 6pt Deep Socket 7mm 1/4" Dr. 6pt Deep Socket 8mm 1/4" Dr. 6pt Deep Socket 9mm 1/4" Dr. 6pt Deep Socket 10mm 1/4" Dr. 6pt Deep Socket 11mm 1/4" Dr. 6pt Deep Socket 12mm 3/8" Dr. 6pt Deep Socket 7mm 3/8" Dr. 6pt Deep Socket 8mm 3/8" Dr. 6pt Deep Socket 9mm 3/8" Dr. 6pt Deep Socket 10mm 3/8" Dr. 6pt Deep Socket 11mm 3/8" Dr. 6pt Deep Socket 12mm 3/8" Dr. 6pt Deep Socket 13mm 3/8" Dr. 6pt Deep Socket 14mm 3/8" Dr. 6pt Deep Socket 15mm 3/8" Dr. 6pt Deep Socket 16mm 3/8" Dr. 6pt Deep Socket 17mm 3/8" Dr. 6pt Deep Socket 18mm 3/8" Dr. 6pt Deep Socket 19mm 3/4" Brass Drift Punch 11/32" Jobber Drill Bit 1/16" Jobber Drill Bit 11/64" Jobber Drill Bit 1/2" Jobber Drill Bit 13/32" Jobber Drill Bit 13/64"Jobber Drill Bit 1/4" Jobber Drill Bit 15/32" Jobber Drill Bit 15/64" Jobber Drill Bit 17/64" Jobber Drill Bit 1/8" Jobber Drill Bit 19/64" Jobber Drill Bit 21/64" Jobber Drill Bit 23/64" Jobber Drill Bit 25/64" Jobber Drill Bit 27/64" Jobber Drill Bit 29/64" Jobber Drill Bit 3/16" Jobber Drill Bit 31/64" Jobber Drill Bit 3/32" Jobber Drill Bit 3/8" Jobber Drill Bit 5/16" Jobber Drill Bit 5/32" Jobber Drill Bit 5/64" Jobber Drill Bit 7/16" Jobber Drill Bit 7/32" Jobber Drill Bit

• • • •

• • • • • • •

• • • •

• • • • • • • • • • •

• • • • • • • • •

• • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • •

• • •

• •

• • • • • •

•

• • •

• • • • •

•

• • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • •

• • • • • • • • •

• • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • •

SKC110 SKC158 SKC213 SKC250 SKC300 SKC330 SKC500 SKC600 SKC650 SKC700

WSW No. Description CW207 CW208 CW209 CW210 CW211 CW212 CW213 CW301 CW302 CW303 CW304 CW305 CW307 CW309 CW310 DMS12610 DMS12611 DMS12612 DMS12613 DMS12614 DMS12615 DMS12616 DMS12617 DMS12618 DMS12619 DMS12620 DMS12621 DMS12622 DMS12623 DMS12624 DMS12625 DMS12626 DMS12627 DMS12628 DMS12629 DMS12630 DMS12632 DMS1404 DMS1405 DMS1406 DMS1407 DMS1408 DMS1409 DMS1410 DMS1411 DMS1412 DMS38607 DMS38608 DMS38609 DMS38610 DMS38611 DMS38612 DMS38613 DMS38614 DMS38615 DMS38616 DMS38617 DMS38618 DMS38619 DPB10 DRJ1132 DRJ116 DRJ1164 DRJ12 DRJ1332 DRJ1364 DRJ14 DRJ1532 DRJ1564 DRJ1764 DRJ18 DRJ1964 DRJ2164 DRJ2364 DRJ2564 DRJ2764 DRJ2964 DRJ316 DRJ3164 DRJ332 DRJ38 DRJ516 DRJ532 DRJ564 DRJ716 DRJ732

SKC110 SKC158 SKC213 SKC250 SKC300 SKC330 SKC500 SKC600 SKC650 SKC700

TOOL KIT CONTENTS WSW No. Description DRJ764 DRJ932 DRJ964 DS1 DS126A DS126B DS126C DS126D DS126F DS126H DS126I DS126K DS126L DS126M DS126N DS126O DS126P DS126Q DS126R DS1460 DS1461 DS1462 DS1463 DS1464 DS1465 DS146A DS146B DS146C DS3864 DS386A DS386B DS386C DS386D DS386F DS386H DS386I DS386K DS386L ET66BL FFB10 FFH8 FFS10 FFS8 FHRB10 FHRB8 FMB10 FP1012M FP1214 FP1314M FP1517M FP1618 FP2022 FP2428 FP911M FRB10 FST6 GPC100 GT22 GT25 GT26 HB2 HBS38-10 HBS38-12 HBS38-4 HBS38-5 HBS38-6 HBS38-7 HBS38-8 HD2 HD3 HK116 HK14 HK18 HK316 HK332 HK38 HK516 HK532 HK564 HK732 HK764 HK964 HK964 HKF8PPM HKF9 HKF9M

7/64" Jobber Drill Bit 9/32" Jobber Drill Bit 9/64" Jobber Drill Bit 1" Round Stock Die Handle 1/2" Dr. 6pt Deep Socket 3/8" 1/2" Dr. 6pt Deep Socket 7/16" 1/2" Dr. 6pt Deep Socket 1/2" 1/2" Dr. 6pt Deep Socket 9/16" 1/2" Dr. 6pt Deep Socket 5/8" 1/2" Dr. 6pt Deep Socket 11/16" 1/2" Dr. 6pt Deep Socket 3/4" 1/2" Dr. 6pt Deep Socket 13/16" 1/2" Dr. 6pt Deep Socket 7/8" 1/2" Dr. 6pt Deep Socket 15/16" 1/2" Dr. 6pt Deep Socket 1" 1/2" Dr. 6pt Deep Socket 1-1/16" 1/2" Dr. 6pt Deep Socket 1-1/8" 1/2" Dr. 6pt Deep Socket 1-3/16" 1/2" Dr. 6pt Deep Socket 1-1/4" 1/4" Dr. 6pt Deep Socket 3/16" 1/4" Dr. 6pt Deep Socket 7/32" 1/4" Dr. 6pt Deep Socket 1/4" 1/4" Dr. 6pt Deep Socket 9/32" 1/4" Dr. 6pt Deep Socket 5/16" 1/4" Dr. 6pt Deep Socket 11/32" 1/4" Dr. 6pt Deep Socket 3/8" 1/4" Dr. 6pt Deep Socket 7/16" 1/4" Dr. 6pt Deep Socket 1/2" 3/8" Dr. 6pt Deep Socket 5/16" 3/8" Dr. 6pt Deep Socket 3/8" 3/8" Dr. 6pt Deep Socket 7/16" 3/8" Dr. 6pt Deep Socket 1/2" 3/8" Dr. 6pt Deep Socket 9/16" 3/8" Dr. 6pt Deep Socket 5/8" 3/8" Dr. 6pt Deep Socket 11/16" 3/8" Dr. 6pt Deep Socket 3/4" 3/8" Dr. 6pt Deep Socket 13/16" 3/8" Dr. 6pt Deep Socket 7/8" 3/4" x 66' General Puprose Black PVC Tape 10" Flat Bastard File 8" 4-in-1 Hand File 10" Flat Smooth File 8" Flat Smooth File 10" Half Round Flat Bastard File 8" Half Round Flat Bastard File 10" Mill Bastard File 10mm x 12mm Flare Nut Wrench 3/8" X 7/16" Flare Nut Wrench 13mm x 14mm Flare Nut Wrench 15mm x 17mm Flare Nut Wrench 1/2" X 9/16" Flare Nut Wrench 5/8" X 11/16" Flare Nut Wrench 3/4" X 7/8" Flare Nut Wrench 9mm x 11mm Flare Nut Wrench 10" Round Bastard File 6" Slim Taper File 2/3 Jaw Combiantion Gear Puller, 4 Ton 22 pc. Go-No-Go Feeler Gauge 25 pc. Metric Feeler Gauge 26 pc. Universal Feeler Gauge 2 lb. Brass Hammer 3/8" Dr. Short Hex Bit Socket 5/16" 3/8" Dr. Short Hex Bit Socket 3/8" 3/8" Dr. Short Hex Bit Socket 1/8" 3/8" Dr. Short Hex Bit Socket 5/32" 3/8" Dr. Short Hex Bit Socket 3/16" 3/8" Dr. Short Hex Bit Socket 7/32" 3/8" Dr. Short Hex Bit Socket 1/4" 2 lb. Dead Blow Hammer 3 lb. Dead Blow Hammer 1/16" Short Hex Key 1/4" Short Hex Key 1/8" Short Hex Key 3/16" Short Hex Key 3/32" Short Hex Key 3/8" Short Hex Key 5/16" Short Hex Key 5/32" Short Hex Key 5/64" Long Hex Key 7/32" Short Hex Key 7/64" Short Hex Key 9/64" Short Hex Key 9/64" Short Arm Hex Key 8 pc.Metric Folding Hex Key Set w/TPR/PP Grip 9 pc.SAE Folding Hex Key Wrench Set 9 pc.Metric Folding Hex Key Wrench Set

•

• • •

• • • • • • • • • • • • • • • • • • • • •

• • • • • • • • •

• • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • •

•

• • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • •

• • • • • • • •

• • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • •

• •

www.westwardtools.ca

W399-W404-10-EN.qxp

2/9/10

11:38 AM

Page 401

9 pc.SAE Folding Hex Key Set w/TPR/PP Grip 1/16" Long Hex Key Long 1/4" Long Hex Key Long 1/8" Long Hex Key Long 3/16" Long Hex Key Long 3/32" Long Hex Key Long 3/8" Long Hex Key Long 5/16" Long Hex Key Long 5/32" Long Hex Key Long 5/64" Long Hex Key Long 7/32" Long Hex Key Long 7/64" Long Hex Key Long 9/64" Long Hex Key Long Hex Key Set 22 pcs SAE/Metric 17 pc. SAE & Torks Hex Key Set 1"/25mm Bi-Metal Hole Saw 1-1/2"/38mm Bi-Metal Hole Saw 1-1/4"/32mm Bi-Metal Hole Saw 1-3/8"/35mm Bi-Metal Hole Saw 7/8"/22mm Bi-Metal Hole Saw 1/4" Triangular Shank Arbor Hole Saw Adapter High Tension Hacksaw 24oz. Soft Face Hammer w/Plastic & Rubber Tips 10 pc. SAE Extra Long Hex Bit Socket Set, 1/2" Dr. 8 pc. SAE Extra Long Hex Bit Socket Set, 3/8" Dr. 8 pc. Torks Folding Hex Key Set 3" Locking Blade Knife w/Wood Handle Replacement Blade 6 Pack for L500/L650 Utlity Knife w/ Autolock Utility Knife, Auto-Feed Large Prof. Compact Position Lock Tool Box 10" Curved Jaw Locking Pliers 11" Locking Swivel Pad C-Clamp Pliers 7" Curved Jaw Locking Pliers 6" Long Nose Locking Pliers w/Wire Cutter 9" Long Nose Locking Pliers w/Wire Cutter 10" Straight Jaw Locking Pliers Intermediate Professional Tool Box 1/2" Dr. Long Hex Bit Socket 10 mm 1/2" Dr. Long Hex Bit Socket 12 mm 1/2" Dr. Long Hex Bit Socket 14 mm 1/2" Dr. Long Hex Bit Socket 17 mm 1/2" Dr. Long Hex Bit Socket 5 mm 1/2" Dr. Long Hex Bit Socket 6 mm 1/2" Dr. Long Hex Bit Socket 7 mm 1/2" Dr. Long Hex Bit Socket 8 mm 1/2" Dr. Long Hex Bit Socket 9 mm 3/8" Dr. Hex Bit Socket 10 mm 3/8" Dr. Long Hex Bit Socket 10 mm 3/8" Dr. Long Hex Bit Socket 12 mm 3/8" Dr. Hex Bit Socket 3 mm 3/8" Dr. Long Hex Bit Socket 3 mm 3/8" Dr. Hex Bit Socket 4 mm 3/8" Dr. Long Hex Bit Socket 4 mm 3/8" Dr. Hex Bit Socket 5 mm 3/8" Dr. Long Hex Bit Socket 5 mm 3/8" Dr. Hex Bit Socket 6 mm 3/8" Dr. Long Hex Bit Socket 6 mm 3/8" Dr. Hex Bit Socket 7 mm 3/8" Dr. Long Hex Bit Socket 7 mm 3/8" Dr. Hex Bit Socket 8 mm 3/8" Dr. Long Hex Bit Socket 8 mm 3/8" Dr. Long Hex Bit Socket 9 mm 1.5 mm Short Hex Key 10 mm Short Hex Key 2 mm Short Hex Key 2.5 mm Short Hex Key 3 mm Short Hex Key 4 mm Short Hex Key 4.5 mm Short Hex Key 5 mm Short Hex Key 5.5 mm Short Hex Key 6 mm Short Hex Key 7 mm Short Hex Key 8 mm Short Hex Key 9 mm Short Hex Key 1/2" Dr. 12pt Socket 10 mm 1/2" Dr. 12pt Socket 11 mm 1/2" Dr. 12pt Socket 12 mm 1/2" Dr. 12pt Socket 13 mm 1/2" Dr. 12pt Socket 14 mm 1/2" Dr. 12pt Socket 15 mm 1/2" Dr. 12pt Socket 16 mm 1/2" Dr. 12pt Socket 17 mm 1/2" Dr. 12pt Socket 18 mm

www.westwardtools.ca

• • • • • • • • • • • •

•

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • •

• •

•

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • •

• • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • •

WSW No. Description MS1219 MS1220 MS1221 MS1223 MS1224 MS12610 MS12611 MS12612 MS12613 MS12614 MS12615 MS12616 MS12617 MS12618 MS12619 MS12620 MS12621 MS12622 MS12623 MS12624 MS12625 MS12626 MS12627 MS12628 MS12629 MS12630 MS12632 MS1404 MS1405 MS1406 MS1407 MS1408 MS1409 MS1410 MS1411 MS1412 MS1445 MS1455 MS38606 MS38607 MS38608 MS38609 MS38610 MS38611 MS38612 MS38613 MS38614 MS38615 MS38616 MS38617 MS38618 MS38619 MS38621 MS38622 MSP1221 MSP3821 MSU38610 MSU38611 MSU38612 MSU38613 MSU38614 MSU38615 MSU38616 MSU38617 MSU38618 MSU38619 MT1 MT25 MT25C ND06M ND07M ND08E ND08M ND09M ND10E ND10M ND11M ND12E ND12M ND14E ND16E NDM10 NDM11 NDM12 NDM13 NDM6

1/2" Dr. 12pt Socket 19 mm 1/2" Dr. 12pt Socket 20 mm 1/2" Dr. 12pt Socket 21 mm 1/2" Dr. 12pt Socket 23 mm 1/2" Dr. 12pt Socket 24 mm 1/2" Dr. 6pt Socket 10 mm 1/2" Dr. 6pt Socket 11 mm 1/2" Dr. 6pt Socket 12 mm 1/2" Dr. 6pt Socket 13 mm 1/2" Dr. 6pt Socket 14 mm 1/2" Dr. 6pt Socket 15 mm 1/2" Dr. 6pt Socket 16 mm 1/2" Dr. 6pt Socket 17 mm 1/2" Dr. 6pt Socket 18 mm 1/2" Dr. 6pt Socket 19 mm 1/2" Dr. 6pt Socket 20 mm 1/2" Dr. 6pt Socket 21 mm 1/2" Dr. 6pt Socket 22 mm 1/2" Dr. 6pt Socket 23 mm 1/2" Dr. 6pt Socket 24 mm 1/2" Dr. 6pt Socket 25 mm 1/2" Dr. 6pt Socket 26 mm 1/2" Dr. 6pt Socket 27 mm 1/2" Dr. 6pt Socket 28 mm 1/2" Dr. 6pt Socket 29 mm 1/2" Dr. 6pt Socket 30 mm 1/2" Dr. 6pt Socket 32 mm 1/4" Dr. 6pt Socket 4 mm 1/4" Dr. 6pt Socket 5 mm 1/4" Dr. 6pt Socket 6 mm 1/4" Dr. 6pt Socket 7 mm 1/4" Dr. 6pt Socket 8 mm 1/4" Dr. 6pt Socket 9 mm 1/4" Dr. 6pt Socket 10 mm 1/4" Dr. 6pt Socket 11 mm 1/4" Dr. 6pt Socket 12 mm 1/4" Dr. 6pt Socket 4.5 mm 1/4" Dr. 6pt Socket 5.5 mm 3/8" Dr. 6pt Socket 6 mm 3/8" Dr. 6pt Socket 7 mm 3/8" Dr. 6pt Socket 8 mm 3/8" Dr. 6pt Socket 9 mm 3/8" Dr. 6pt Socket 10 mm 3/8" Dr. 6pt Socket 11 mm 3/8" Dr. 6pt Socket 12 mm 3/8" Dr. 6pt Socket 13 mm 3/8" Dr. 6pt Socket 14 mm 3/8" Dr. 6pt Socket 15 mm 3/8" Dr. 6pt Socket 16 mm 3/8" Dr. 6pt Socket 17 mm 3/8" Dr. 6pt Socket 18 mm 3/8" Dr. 6pt Socket 19 mm 3/8" Dr. 6pt Socket 21 mm 3/8" Dr. 6pt Socket 22 mm 1/2" Dr. Spark Plug Socket 21 mm 3/8" Dr. Spark Plug Socket 21 mm 3/8" Dr. Universal Socket 10 mm 3/8" Dr. Universal Socket 11 mm 3/8" Dr. Universal Socket 12 mm 3/8" Dr. Universal Socket 13 mm 3/8" Dr. Universal Socket 14 mm 3/8" Dr. Universal Socket 15 mm 3/8" Dr. Universal Socket 16 mm 3/8" Dr. Universal Socket 17 mm 3/8" Dr. Universal Socket 18 mm 3/8" Dr. Universal Socket 19 mm Round Magnetic Parts Tray 1" x 25' Pro. Series High Vis Measuring Tape 1" x 25' Carpenter's Measuring Tape 6 mm Comfort Grip Nut Driver 7 mm Comfort Grip Nut Driver 1/4" Insulated SAE Nut Driver 8 mm Comfort Grip Nut Driver 9 mm Comfort Grip Nut Driver 5/16" Insulated SAE Nut Driver 10 mm Comfort Grip Nut Driver 11 mm Comfort Grip Nut Driver 3/8" Insulated SAE Nut Driver 12 mm Comfort Grip Nut Driver 7/16" Insulated SAE Nut Driver 1/2" Insulated SAE Nut Driver 10 mm Metric Nut Driver 11 mm Metric Nut Driver 12 mm Metric Nut Driver 13 mm Metric Nut Driver 6 mm Metric Nut Driver

SKC110 SKC158 SKC213 SKC250 SKC300 SKC330 SKC500 SKC600 SKC650 SKC700

WSW No. Description HKF9PP HKL116 HKL14 HKL18 HKL316 HKL332 HKL38 HKL516 HKL532 HKL564 HKL732 HKL764 HKL964 HKLP22 HKS17 HL1 HL1-12 HL1-14 HL1-38 HL78 HLA9001 HLA9080 HS1 HSF24 HSK1210L HSK388L HTF8 KL3W L500B L650 L750 LA400 LWC10 LWC11 LWC7 LWN6 LWN9 LWR10 ME300 MHBS12-10L MHBS12-12L MHBS12-14L MHBS12-17L MHBS12-5L MHBS12-6L MHBS12-7L MHBS12-8L MHBS12-9L MHBS38-10 MHBS38-10L MHBS38-12L MHBS38-3 MHBS38-3L MHBS38-4 MHBS38-4L MHBS38-5 MHBS38-5L MHBS38-6 MHBS38-6L MHBS38-7 MHBS38-7L MHBS38-8 MHBS38-8L MHBS38-9L MHK015 MHK10 MHK2 MHK25 MHK3 MHK4 MHK45 MHK5 MHK55 MHK6 MHK7 MHK8 MHK9 MS1210 MS1211 MS1212 MS1213 MS1214 MS1215 MS1216 MS1217 MS1218

SKC110 SKC158 SKC213 SKC250 SKC300 SKC330 SKC500 SKC600 SKC650 SKC700

TOOL KIT CONTENTS

• • •

• • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • •

• • • • • • • • • • • •

• • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • •

• • • • • • • • • • • • • • • • • • • • • • •

•

• • • • • • • • • • • • • • •

• • • • • • • • •

• • • • • • • • • • • • •

•

• • • • • • • • • • • • • • •

• • • • • • • • • • •

•

• • • • • • • • • • • • • •

• •

• • • • • •

• • • •

401

W399-W404-10-EN.qxp

2/9/10

11:38 AM

Page 402

402

7 mm Metric Nut Driver 8 mm Metric Nut Driver 9 mm Metric Nut Driver 11/32" SAE Nut Driver 1/2" SAE Nut Driver 1/4" SAE Nut Driver 3/16" SAE Nut Driver 3/8" SAE Nut Driver 5/16" SAE Nut Driver 7/16" SAE Nut Driver 110 Piece Tap & Die Set 24 1/4"Alignment Bar 5/16 X 6" Rolling Head Pry Bar 12" Mechanics Pry Bar 7/16 X 12" Rolling Head Pry Bar 18" Mechanics Pry Bar 9/16 X 16" Rolling Head Pry Bar 17 1/2" Rolling Head Pry Bar 11/16 X 20" Rolling Head Pry Bar 24" Mechanics Pry Bar 17 3/4" Alignment Bar 8" Mechanics Pry Bar 12" Bent Fork Impact Pry Bar 18" Bent Elbow Impact Pry Bar 24" Striking Impact Pry Bar 8" Bent Impact Pry Bar 4 1/2" Pro Series Mini Diagonal Pliers 6 1/4" Pro-Series Hi-Leverage HD Diagonal Cutters 8" Pro-Series Hi-Leverage HD Diagonal Cutters 4 1/4" Pro Series Mini End Cutting Nippers 10" Pro-Series Tongue & Groove Pliers 12" Pro-Series Tongue & Groove Pliers 16" Groove Joint Pliers 8" Groove Joint Pliers 0.5 - 1.75 Metric Pitch Gauge 12 - 40 SAE Pitch Gauge 5 1/2" Pro Series Mini Long Nose Pliers 8" Contractor Series High Leverage Linesmens Pliers 6" Pro-Series High Leverage Long Nose Pliers 8" Pro-Series High Leverage Long Nose Pliers 4 7/8" Pro Series Mini Bent Nose Pliers 3/16" Comfort Grip Nut Driver 1/4" Comfort Grip Nut Driver 5/16" Comfort Grip Nut Driver 3/8" Comfort Grip Nut Driver 7/16" Comfort Grip Nut Driver 1/2" Comfort Grip Nut Driver 5 1/2" Pro Series Mini Needle Nose Pliers 5/16" Roll Pin Punch 3/32" Roll Pin Punch 1/8" Roll Pin Punch 5/32" Roll Pin Punch 3/16" Roll Pin Punch 1/4" Roll Pin Punch 6" Pro Series Slip Joint Pliers 8" Pro Series Slip Joint Pliers 1/8" Alloy Pipe Tap 24" Heavy Duty Magnetic Pickup Tool 18' Heavy Duty Aluminum Pipe Wrench 10" Heavy Duty Steel Pipe Wrench 10mm x 11mm Box End Ratcheting Wrench 13mm x 14mm Box End Ratcheting Wrench 15mm x 17mm Box End Ratcheting Wrench 19mm x 22mm Box End Ratcheting Wrench 6mm x 8mm Box End Ratcheting Wrench 10mm x 11mm Dbl. Box End Ratcheting Wrench 5/16"x 3/8" Dbl. Box End Ratcheting Wrench 12mm x 13mm Dbl. Box End Ratcheting Wrench 14mm x 15mm Dbl. Box End Ratcheting Wrench 7/16"x 1/2" Dbl. Box End Ratcheting Wrench 16mm x 18mm Dbl. Box End Ratcheting Wrench 17mm x 19mm Dbl. Box End Ratcheting Wrench 9/16"x 5/8" Dbl. Box End Ratcheting Wrench 11/16"x 3/4" Dbl. Box End Ratcheting Wrench 8mm x 9mm Dbl. Box End Ratcheting Wrench 1/4" x 5/16" Box End Ratcheting Wrench 3/8"x7/16" Ratcheting Box End Wrench 1/2"x9/16" Ratcheting Box End Wrench 5/8"x3/4" Ratcheting Box End Wrench 11/16"x7/8" Ratcheting Box End Wrench 5/16" Reversible Ratcheting Comb. Wrench 10 mm Reversible Ratcheting Comb. Wrench 11 mm Reversible Ratcheting Comb. Wrench 3/8" Reversible Ratcheting Comb. Wrench 12 mm Reversible Ratcheting Comb. Wrench 13 mm Reversible Ratcheting Comb. Wrench

• • • • • • • • • • •

• •

• • •

•

• • •

•

• •

•

• •

•

• •

•

• • • • • • •

• •

• • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • •

• •

• • • • • • • • • •

• • • • •

• •

• • • • • • • • •

• •

• • • • • • • • • •

• • • • • •

SKC110 SKC158 SKC213 SKC250 SKC300 SKC330 SKC500 SKC600 SKC650 SKC700

WSW No. Description NDM7 NDM8 NDM9 NSD1132 NSD12 NSD14 NSD316 NSD38 NSD516 NSD716 OK3110 PB1 PB106H PB12 PB1412H PB18 PB1816H PB2 PB2220H PB24 PB3 PB8 PBI12 PBI18 PBI24 PBI8 PD4M PD6H PD7H PE4M PG10H PG12H PG16 PG8 PGM PGS PL5M PL8H PN6H PN8H PNB5M PND06 PND08 PND10 PND12 PND14 PND16 PNN5M PR10 PR3 PR4 PR5 PR6 PR8 PS6H PS8H PT18 PTM24 PWAT18 PWT10 RBM12-1011 RBM12-1314 RBM12-1517 RBM12-1922 RBM12-68 RBS1011M RBS1012 RBS1213M RBS1415M RBS1416 RBS1618M RBS1719M RBS1820 RBS2224 RBS89M RBW100 RBW101 RBW103 RBW106 RBW108 RC10R RC10RM RC11RM RC12R RC12RM RC13RM

SKC110 SKC158 SKC213 SKC250 SKC300 SKC330 SKC500 SKC600 SKC650 SKC700

TOOL KIT CONTENTS WSW No. Description RC14R 7/16" Reversible Ratcheting Comb. Wrench RC14RM 14 mm Reversible Ratcheting Comb. Wrench RC15RM 15 mm Reversible Ratcheting Comb. Wrench RC16R 1/2" Reversible Ratcheting Comb. Wrench RC16RM 16 mm Reversible Ratcheting Comb. Wrench RC17RM 17 mm Reversible Ratcheting Comb. Wrench RC18R 9/16" Reversible Ratcheting Comb. Wrench RC18RM 18 mm Reversible Ratcheting Comb. Wrench RC19RM 19 mm Reversible Ratcheting Comb. Wrench RC20R 5/8" Reversible Ratcheting Comb. Wrench RC22R 11/16" Reversible Ratcheting Comb. Wrench RC24R 3/4" Reversible Ratcheting Comb. Wrench RD1-1024 1" Round Die 10-24 Machine Thread RD1-1032 1" Round Die 10-32 Machine Thread RD1-1224 1" Round Die 12-24 Machine Thread RD1-12NC 1" Round Die 1/2" Coarse Thread RD1-12NF 1" Round Die 1/2" Fine Thread RD1-14NC 1" Round Die 1/4" Coarse Thread RD1-14NF 1" Round Die 1/4" Fine Thread RD1-38NC 1" Round Die 3/8" Coarse Thread RD1-38NF 1" Round Die 3/8" Fine Thread RD1-436 1" Round Die 4-36 Machine Thread RD1-516NC 1" Round Die 5/16" Coarse Thread RD1-516NF 1" Round Die 5/16" Fine Thread RD1-632 1" Round Die 6-32 Machine Thread RD1-716NC 1" Round Die 7/16" Coarse Thread RD1-716NF 1" Round Die 7/16" Fine Thread RD1-832 1" Round Die 8-32 Machine Thread RDM1-10MM125 1" Round Die 10mm 1.25 Pitch RDM1-10MM15 1" Round Die 10mm 1.5 Pitch RDM1-12MM15 1" Round Die 12mm 1.5 Pitch RDM1-12MM175 1" Round Die 12mm 1.75 Pitch RDM1-3MM5 1" Round Die 3mm .5 Pitch RDM1-3MM6 1" Round Die 3mm .6 Pitch RDM1-4MM7 1" Round Die 4mm .7 Pitch RDM1-4MM75 1" Round Die 4mm .75 Pitch RDM1-5MM8 1" Round Die 5mm .8 Pitch RDM1-5MM9 1" Round Die 5mm .9 Pitch RDM1-6MM1 1" Round Die 6mm 1.0 Pitch RDM1-6MM75 1" Round Die 6mm .75 Pitch RDM1-7MM1 1" Round Die 7mm 1.0 Pitch RDM1-7MM75 1" Round Die 7mm .75 Pitch RDM1-8MM1 1" Round Die 8mm 1.0 Pitch RDM1-8MM125 1" Round Die 8mm 1.25 Pitch RM24 24 oz. Rubber Mallet SA1002 1" Dr. Universal Joint, SA1201 1/2" Dr. Flex Handle 16" SA1202 1/2" Dr. Universal Joint SA1207 1/2" Dr. Speeder Handle 18 SA1210 1/2" Dr. Extension 10" SA1218 1/2" Dr. Extension 18" SA122 1/2" Dr. Extension 2 1/2" SA1224 1/2" Dr. Extension 24" SA1230 1/2" Dr. Extension 30" SA1238 1/2" F-3/8" M Socket Adapter SA125 1/2" Dr. Extension 5" SA12A 1/2" Dr. Quick Release Ratchet SA12F 1/2" Dr, Flex Ratchet SA1401 1/4" Dr. Flex Handle SA1402 1/4" Dr. Universal Joint SA142 1/4" Dr. Extension 2" SA1438 1/4" F-3/8" M Socket Adapter SA144 1/4" Dr. Extension 4" SA146 1/4" Dr. Extension 6" SA14A 1/4" Dr. Ratchet SA3400 3/4" Dr. Ratchet SA3402 3/4" Dr. Universal Joint SA3404 3/4" Dr. Extension 4" SA3405 3/4" Dr. Extension 8" SA3406 3/4" Dr. Extension 16" SA3418 3/4" Dr. Sliding T-Handle 18" SA3801 3/8" Dr. Flex Bar SA3802 3/8" Dr. Universal Joint SA3807 3/8" Dr. Speeder Handle SA3810 3/8" Dr. Extension 10" SA3812 3/8" F-1/2" M Socket Adapter SA3814 3/8" F-1/4" M Socket Adapter SA382W 3/8" Dr. Wobble Extension 1 1/4" SA383 3/8" Dr. Extension 3" SA383W 3/8" Dr. Wobble Extension 3" SA386 3/8" Dr. Extension 6" SA386W 3/8" Dr. Wobble Extension 6" SA389W 3/8" Dr. Wobble Extension 9" SA38A 3/8" Dr. Ratchet SAH3419 3/4" Dr. Flex Handle SD10 10-in-1 Screwdriver

• • • •

• •

•

• • •

• •

• • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • •

• • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• •

•

• •

www.westwardtools.ca

W399-W404-10-EN.qxp

2/9/10

11:38 AM

Page 403

1/4" x 1" Screwdriver Bit Adapter 1/4" x 1" Screwdriver Bit 1/16" Hex 1/4" x 1" Screwdriver Bit 1/4" Hex 1/4" x 1" Screwdriver Bit 1.5 mm Hex 1/4" x 1" Screwdriver Bit 1/8" Hex 1/4" x 1" Screwdriver Bit 2.5 mm Hex 1/4" x 1" Screwdriver Bit 2 mm Hex 1/4" x 1" Screwdriver Bit 3/16" Hex 1/4" x 1" Screwdriver Bit 3/32" Hex 1/4" x 1" Screwdriver Bit 3.5 mm Hex 1/4" x 1" Screwdriver Bit 3 mm Hex 1/4" x 1" Screwdriver Bit 4.5 mm Hex 1/4" x 1" Screwdriver Bit 4 mm Hex 1/4" x 1" Screwdriver Bit 5/32" Hex 1/4" x 1" Screwdriver Bit 5.5 mm Hex 1/4" x 1" Screwdriver Bit 5/64" Hex 1/4" x 1" Screwdriver Bit 5 mm Hex 1/4" x 1" Screwdriver Bit 6 mm Hex 1/4" x 1" Screwdriver Bit 7/32" Hex 1/4" x 1" Screwdriver Bit 7/64" Hex 1/4" x 1" Screwdriver Bit 9/64" Hex 1/4" x 1" Screwdriver Bit #0 Phillips 1/4" x 1" Screwdriver Bit #1 Phillips 1/4" x 1" Screwdriver Bit #2 Phillips 1/4" x 1" Screwdriver Bit #3 Phillips 1/4" x 1" Screwdriver Bit #1 Pozi-Drive 1/4" x 1" Screwdriver Bit #2 Pozi-Drive 1/4" x 1" Screwdriver Bit #3 Pozi-Drive 1/4" x 1" Screwdriver Bit #1 Square 1/4" x 1" Screwdriver Bit #2 Square 1/4" x 1" Screwdriver Bit #3 Square 1/4" x 1" Screwdriver Bit 1/4" Slot 1/4" x 1" Screwdriver Bit 3/16" Slot 1/4" x 1" Screwdriver Bit 7/32" Slot 1/4" x 1" Screwdriver Bit T10 Torks 1/4" x 1" Screwdriver Bit T15 Torks 1/4" x 1" Screwdriver Bit T20 Torks 1/4" x 1" Screwdriver Bit T25 Torks 1/4" x 1" Screwdriver Bit T27 Torks 1/4" x 1" Screwdriver Bit T30 Torks 1/4" x 1" Screwdriver Bit T40 Torks 1/4" x 1" Screwdriver Bit T45 Torks 1/4" x 1" Screwdriver Bit T8 Torks 1/8" Electricians Screwdriver 3/16" Electricians Screwdriver 1/4" Dr. Spinner Handle 36 pc. Screwdriver Bit Set w/Handle 45 pc. Gearless Ratcheting Screwdriver Set SDK45 Handle 1.5 mm Hex Head Precision Screwdriver 2 mm Hex Head Precision Screwdriver 2.5 mm Hex Head Precision Screwdriver 3 mm Hex Head Precision Screwdriver #0 Phillps Precision Screwdriver #0-3 Phillps Precision Screwdriver #1-2 Phillps Precision Screwdriver 1 mm Slotted Precision Screwdriver 2 mm Slotted Precision Screwdriver 3 mm Slotted Precision Screwdriver 3.5 mm Slotted Precision Screwdriver T10 Torks Precision Screwdriver T15 Torks Precision Screwdriver T6 Torks Precision Screwdriver T8 Torks Precision Screwdriver #1 Phillips Stubby Screwdriver #2 Phillips Stubby Screwdriver #2 Phillips Screwdriver #3 Phillips Screwdriver #1 Square Screwdriver #2 Square Screwdriver #3 Square Screwdriver #1 Square Screwdriver #2 Square Screwdriver 1/4" Slot Stubby Screwdriver Round Shank 1/4" Slot Screwdriver Round Shank 1/4" Slot Screwdriver Round Shank 5/16" Slot Screwdriver Round Shank 3/8" Slot Screwdriver Round Shank 3/8" Slot Screwdriver Square Shank T10 Magnetic Torks Screwdriver T15 Magnetic Torks Screwdriver T20 Magnetic Torks Screwdriver T25 Magnetic Torks Screwdriver T27 Magnetic Torks Screwdriver T30 Magnetic Torks Screwdriver 1/8" Comfort Grip Electricians Screwdriver

www.westwardtools.ca

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • •

• •

• • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • •

• • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • •

WSW No. Description SE33T SE34T SES1 SES10H SES1H SES2 SES2H SES3 SES3H SES4 SES4H SES5 SES5H SES6H SES7H SES8H SES9H SHD39 SHM37 SJ4 SJ602V SJ603V SJ606V SJ612 SJ612A SJ614 SJ615 SJK4 SK117 SM200 SP126F SP126K SP14T SP24T SP36T SP386F SP386K SP386UF SPK382 SR14T SR24T SR34T SS122B SS122C SS122D SS122F SS122H SS122I SS122K SS122L SS122M SS122N SS122O SS122P SS122Q SS122R SS126A SS126B SS126C SS126D SS126F SS126H SS126I SS126K SS126L SS126M SS126N SS126O SS126P SS126Q SS126R SS12ZA SS12ZF SS12ZO SS12ZP SS12ZQ SS12ZS SS1460 SS1461 SS1462 SS1463 SS1464 SS1465 SS146A SS146B SS146C

3/16" Comfort Grip Electricians Screwdriver 3/16" Comfort Grip Electricians Screwdriver 7/64" Spiral Fluted Screw Extractor 3/4" Mutli-Spline Screw Extractor #12 Mutli-Spline Screw Extractor 9/64" Spiral Fluted Screw Extractor 1/4" Mutli-Spline Screw Extractor 5/32" Spiral Fluted Screw Extractor 5/16" Mutli-Spline Screw Extractor 1/4" Spiral Screw Extractor 3/8" Mutli-Spline Screw Extractor 19/64" Spiral Screw Extractor 7/16" Mutli-Spline Screw Extractor 1/2" Mutli-Spline Screw Extractor 9/16" Mutli-Spline Screw Extractor 5/8" Mutli-Spline Screw Extractor 11/16" Mutli-Spline Screw Extractor 9 1/4" Heavy-Duty Shears 7 1/2" Multi-Purpose Shears Half Round Long Nose Pliers 7" Linesman Pliers 6-1/4" Diagonal Cutters 6-1/4" Long Nose Pliers 7" External Snap Ring Pliers - Straight 7" Internal Snap Ring Pliers - Straight 11" Long Reach Needle Nose Pliers 11 1/2" Long Reach Needle Nose Pliers 4 pc. Internal-External Comb. Snap Ring Plier Kit 17 Piece Socket Set, 1" Dr. Small Prof. Compact Position Lock Tool Box 1/2" Dr. Spark Plug Socket 5/8" 1/2" Dr. Spark Plug Socket 13/16" #1 Phillips Mechanics Series Screwdriver #2 Phillips Mechanics Series Screwdriver #3 Phillips Mechanics Series Screwdriver 3/8" Dr. 6pt Spark Plug Socket 5/8" 3/8" Dr. 6pt Spark Plug Socket 13/16" 3/8" Dr. 6pt Spark Plug U-Joint Socket 5/8" 3 pc. Spark Plug Socket and Ratchet Set #1 Square Mechanics Series Screwdriver #2 Square Mechanics Series Screwdriver #3 Square Mechanics Series Screwdriver 1/2" Dr. 12pt Socket 7/16" 1/2" Dr. 12pt Socket 1/2" 1/2" Dr. 12pt Socket 9/16" 1/2" Dr. 12pt Socket 5/8" 1/2" Dr. 12pt Socket 11/16" 1/2" Dr. 12pt Socket 3/4" 1/2" Dr. 12pt Socket 13/16" 1/2" Dr. 12pt Socket 7/8" 1/2" Dr. 12pt Socket 15/16" 1/2" Dr. 12pt Socket 1" 1/2" Dr. 12pt Socket 1 1/16" 1/2" Dr. 12pt Socket 1 1/8" 1/2" Dr. 12pt Socket 1 3/16" 1/2" Dr. 12pt Socket 1 1/4" 1/2" Dr. 6pt Socket 3/8" 1/2" Dr. 6pt Socket 7/16" 1/2" Dr. 6pt Socket 1/2" 1/2" Dr. 6pt Socket 9/16" 1/2" Dr. 6pt Socket 5/8" 1/2" Dr. 6pt Socket 11/16" 1/2" Dr. 6pt Socket 3/4" 1/2" Dr. 6pt Socket 13/16" 1/2" Dr. 6pt Socket 7/8" 1/2" Dr. 6pt Socket 15/16" 1/2" Dr. 6pt Socket 1" 1/2" Dr. 6pt Socket 1 1/16" 1/2" Dr. 6pt Socket 1 1/8" 1/2" Dr. 6pt Socket 1 3/16" 1/2" Dr. 6pt Socket 1 1/4" 1" Dr. 6pt Socket 1 13/16" 1" Dr. 6pt Socket 2 1/8" 1" Dr. 6pt Socket 2 5/8" 1" Dr. 6pt Socket 2 3/4" 1" Dr. 6pt Socket 2- 5/16" 1" Dr. 6pt Socket 3 1/8" 1/4" Dr. 6pt Socket 3/16" 1/4" Dr. 6pt Socket 7/32" 1/4" Dr. 6pt Socket 1/4" 1/4" Dr. 6pt Socket 9/32" 1/4" Dr. 6pt Socket 5/16" 1/4" Dr. 6pt Socket 11/32" 1/4" Dr. 6pt Socket 3/8" 1/4" Dr. 6pt Socket 7/16" 1/4" Dr. 6pt Socket 1/2"

SKC110 SKC158 SKC213 SKC250 SKC300 SKC330 SKC500 SKC600 SKC650 SKC700

WSW No. Description SDB30A14 SDB30H116 SDB30H14 SDB30H15M SDB30H18 SDB30H25M SDB30H2M SDB30H316 SDB30H332 SDB30H35M SDB30H3M SDB30H45M SDB30H4M SDB30H532 SDB30H55M SDB30H564 SDB30H5M SDB30H6M SDB30H732 SDB30H764 SDB30H964 SDB30P0 SDB30P1 SDB30P2 SDB30P3 SDB30PZ1 SDB30PZ2 SDB30PZ3 SDB30R1 SDB30R2 SDB30R3 SDB30S14 SDB30S316 SDB30S732 SDB30T10 SDB30T15 SDB30T20 SDB30T25 SDB30T27 SDB30T30 SDB30T40 SDB30T45 SDB30T8 SDC105 SDE723 SDH1412 SDK36 SDK45 SDK45H SDP40H15 SDP40H20 SDP40H25 SDP40H30 SDP40P0 SDP40P03 SDP40P12 SDP40S10 SDP40S20 SDP40S30 SDP40S35 SDP40T10 SDP40T15 SDP40T6 SDP40T8 SDP740 SDP741 SDP742 SDP743 SDR101 SDR102 SDR103 SDR111 SDR112 SDR700 SDR701 SDR702 SDR703 SDR704 SDS732 SDT10 SDT15 SDT20 SDT25 SDT27 SDT30 SE23T

SKC110 SKC158 SKC213 SKC250 SKC300 SKC330 SKC500 SKC600 SKC650 SKC700

TOOL KIT CONTENTS

• •

• • • •

•

• • • •

• • •

• •

• • •

•

• •

•

• •

• • •

• • • • • • • • • • • • • • •

• • • • • • • •

• • • • • •

• • • • • • • • • • • • • •

• • •

• •

• • • • • • • • • • • • • • • • •

• • • • • • • • •

• • • • • • • • • • • • • • • •

• • • • • • •

• • • • • • • • • •

• • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • •

• • • • • •

• • • • • • • • •

• • • • • • • • • • • • • •

• • • • • • • • •

403

W399-W404-10-EN.qxp

2/9/10

11:38 AM

Page 404

404

• • •

• • • • • • • • •

• • •

• • • • •

• • • •

• • • • • • • • • • •

• • • • • • • • • • • • • • • •

• • • • • • • •

• • • •

• • • • • • •

• • • • • • • •

• • • • • • •

• • • •

• • • • • • • • • • • • • • • • • •

• • • • • • •

• • •

•

• • • • • • • •

•

• • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • •

• • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • •

SKC110 SKC158 SKC213 SKC250 SKC300 SKC330 SKC500 SKC600 SKC650 SKC700

WSW No. Description SS1482 1/4" Dr. 8pt Socket 1/4" SS1484 1/4" Dr. 8pt Socket 5/16" SS148A 1/4" Dr. 8pt Socket 3/8" SS342ZF 3/4" Dr. 12pt Socket 2 1/8" SS3824 3/8" Dr. 12pt Socket 5/16" SS382A 3/8" Dr. 12pt Socket 3/8" SS382B 3/8" Dr. 12pt Socket 7/16" SS382C 3/8" Dr. 12pt Socket 1/2" SS382D 3/8" Dr. 12pt Socket 9/16" SS382F 3/8" Dr. 12pt Socket 5/8" SS382H 3/8" Dr. 12pt Socket 11/16" SS382I 3/8" Dr. 12pt Socket 3/4" SS3863 3/8" Dr. 6pt Socket 1/4" SS3864 3/8" Dr. 6pt Socket 5/16" SS386A 3/8" Dr. 6pt Socket 3/8" SS386B 3/8" Dr. 6pt Socket 7/16" SS386C 3/8" Dr. 6pt Socket 1/2" SS386D 3/8" Dr. 6pt Socket 9/16" SS386F 3/8" Dr. 6pt Socket 5/8" SS386H 3/8" Dr. 6pt Socket 11/16" SS386I 3/8" Dr. 6pt Socket 3/4" SS386K 3/8" Dr. 6pt Socket 13/16" SS386L 3/8" Dr. 6pt Socket 7/8" SS44T 1/4" Slotted Mechanics Series Screwdriver SS46T 1/4" Slotted Mechanics Series Screwdriver SS56T 5/16" Slotted Mechanics Series Screwdriver SS68T 3/8" Slotted Mechanics Series Screwdriver SSU126C 1/2" Dr. 6pt Universal Socket 1/2" SSU126D 1/2" Dr. 6pt Universal Socket 9/16' SSU126F 1/2" Dr. 6pt Universal Socket 5/8" SSU126H 1/2" Dr. 6pt Universal Socket 11/16" SSU126I 1/2" Dr. 6pt Universal Socket 3/4" SSU126K 1/2" Dr. 6pt Universal Socket 13/16" SSU126L 1/2" Dr. 6pt Universal Socket 7/8" SSU386A 3/8" Dr. 6pt Universal Socket 3/8" SSU386B 3/8" Dr. 6pt Universal Socket 7/16" SSU386C 3/8" Dr. 6pt Universal Socket 1/2" SSU386D 3/8" Dr. 6pt Universal Socket 9/16' SSU386F 3/8" Dr. 6pt Universal Socket 5/8" SSU386H 3/8" Dr. 6pt Universal Socket 11/16" SSU386I 3/8" Dr. 6pt Universal Socket 3/4" T10 1/16" to 3/16" T-Handle Tap Wrench T720 24 oz. Tubular Steel Soft Face Hammer TAP10MMP125 10mm Plug Tap 1.25 Pitch TAP10MMP15 10mm Plug Tap 1.5 Pitch TAP12MMP175 12mm Plug Tap 1.75 Pitch TAP12NCP 1/2" Plug Tap Coarse TAP12NFP 1/2" Plug Tap Fine TAP14NCP 1/4" Plug Tap Coarse TAP14NFP 1/4" Plug Tap Fine TAP38NCP 3/8" Plug Tap Coarse TAP38NFP 3/8" Plug Tap Fine TAP3MMP5 3mm Plug Tap .5 Pitch TAP3MMP6 3mm Plug Tap .6 Pitch TAP4MMP7 4mm Plug Tap .7 Pitch TAP4MMP75 4mm Plug Tap .75 Pitch TAP516NCP 5/16" Plug Tap Coarse TAP516NFP 5/16" Plug Tap Fine TAP5MMP8 5mm Plug Tap .8 Pitch TAP5MMP9 5mm Plug Tap .9 Pitch TAP6MMP1 6mm Plug Tap 1.0 Pitch TAP6MMP75 6mm Plug Tap .75 Pitch TAP716NCP 7/16" Plug Tap Coarse TAP716NFP 7/16" Plug Tap Fine TAP7MMP1 7mm Plug Tap 1.0 Pitch TAP7MMP75 7mm Plug Tap .75 Pitch TAP8MMP1 8mm Plug Tap 1.0 Pitch TAP8MMP125 8mm Plug Tap 1.25 Pitch TB2603RL 3 Drawer Roller Cabinet TB2606RHD 10 Drawer Roller Cabinet TB2606TS 6 Drawer Tool Chest TB2607RL 7 Drawer Roller Cabinet TB2609TS 9 Drawer Chest TB2612THD 12 Drawer Tool Chest TB4209HD 9 Drawer Heavy Duty Tool Chest TB4213HD 13 Drawer Heavy Duty Roller Cabinet TBH2103 3 Drawer Portable Tool Chest TICO602 6V & 12V Test Light TS10LR 10" Aviation Style Tin Snips Left Cut TS10RG 10" Aviation Style Tin Snips Right Cut TS10SY 10" Aviation Style Tin Snips Straight Cut TS1410 1/4" Dr. Torks Bit T10 TS1415 1/4" Dr. Torks Bit T15 TS1420 1/4" Dr. Torks Bit T20 TS1425 1/4" Dr. Torks Bit T25 TS1427 1/4" Dr. Torks Bit T27

SKC110 SKC158 SKC213 SKC250 SKC300 SKC330 SKC500 SKC600 SKC650 SKC700

TOOL KIT CONTENTS WSW No. Description TS1430 TS1440 TS3845 TS3850 TS3855 TS3860 TSI146 TSI147 TSI148 TSI3810 TSI3812 TSI3814 TSI3816 TSI3818 TWA12 TWA12150 TWA38 TWC12 TWC14 TWR4 UL25 UL50 WC1 WC18A WC2 WC22 WC23 WC24 WC25 WC26 WC27 WC28 WC28A WC29 WC29A WC3 WC30 WC32 WC34 WC35 WC37 WC38 WC4 WC40 WC41 WC42 WC49 WC5 WC50 WC6 WC7 X2 X4 YS1190

1/4" Dr. Torks Bit T30 1/4" Dr. Torks Bit T40 3/8" Dr. Torks Bit T45 3/8" Dr. Torks Bit T50 3/8" Dr. Torks Bit T55 3/8" Dr. Torks Bit T60 1/4" Dr. Inverted Torks Bit E6 1/4" Dr. Inverted Torks Bit E7 1/4" Dr. Inverted Torks Bit E8 3/8" Dr. Inverted Torks Bit E10 3/8" Dr. Inverted Torks Bit E12 3/8" Dr. Inverted Torks Bit E14 3/8" Dr. Inverted Torks Bit E16 3/8" Dr. Inverted Torks Bit E18 1/2" Dr. Industrial Torque Wrench 25 - 25- ft-lbs 1/2" Dr. Industrial Torque Wrench 10 - 150 ft-lbs 3/8" Dr. Industrial Torque Wrench 5 - 80 ft-lbs 1/2" Dr. Mechanics Series Ratchet Head Torque Wrench 20 - 250 ft-lbs 1/4" Dr. Mechanics Series Ratchet Head Torque Wrench 50 - 150 ft-lbs 9" Adjustable Tap Wrench 1/4" Dr. Socket Rail 3/8" Dr. Socket Rail 3/8" Cold Chisel 1/4" Cape Chisel 1/2" Cold Chisel 3/32" Solid Punch 1/8" Solid Punch 3/16" Solid Punch 5/32" Solid Punch 3/16" Solid Punch 3/32" Pin Punch 1/8" Pin Punch 5/32" Pin Punch 3/16" Pin Punch 7/32" Pin Punch 5/8" Cold Chisel 1/4" Pin Punch 3/8" Prick Punch 3/8" Centre Punch 1/2" Centre Punch 5/32" Solid Punch 3/8" Solid Punch 3/4" Cold Chisel 1/8" Drift Punch 3/16" Drift Punch 1/4" Drift Punch 7/32" Solid Punch 7/8" Cold Chisel 1/4" Solid Punch 1" Cold Chisel 1-1/4" Cold Chisel 3/4" x 16' Tape Measure 1 1/4" x 25' Wide Blade Tape Measure 5" Scratch Awl

• • • • • •

• • • • • • • • • • • • • • •

• • • • • • • • • • • • • •

• • • • • • •

•

• • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• •

• • • • • •

• • • • • • • • • •

• • • • • • • • •

• • • •

• • •

• • • • •

•

• • • • •

• •

• • • • •

www.westwardtools.ca

W405-10 - W413-10_reverseindex.qxp

2/9/10

11:14 AM

Page 405

REVERSE INDEX Item No. CDR10128B-BLHC CDR10128B-CAF CDR10128B-GHC CDR10128G-CAF CDR10128G-GHC CDR10128G-RHC CDR1150ML CDR1150S CDR1151ML CDR311OR-LGE CDR311OR-MED CDR311OR-XL CDR311OR2XL CDR311OR3XL CDR311YW-LGE CDR311YW-MED CDR311YW-XL CDR311YW2XL CDR311YW3XL CDR411AHC CDR411CAF CDR411CHC CDR411GAF CDR411GHC CDR411IO CDR411LBHC CDR411SM CDR4150 CDR4151 CDR4190 CDR4191 CDR5588-10 CDR5588-7 CDR5588-8 CDR5588-9 CDR5589-10 CDR5589-7 CDR5589-8 CDR5589-9 CDR5590-10 CDR5590-7 CDR5590-8 CDR5590-9 CDR6150 CDR8844-10 CDR8844-7 CDR8844-8 CDR8844-9 CDR8845-10 CDR8845-7 CDR8845-8 CDR8845-9 CDR8846-10 CDR8846-7 CDR8846-8 CDR8846-9 CDR911OR-LGE CDR911OR-MED CDR911OR-XL CDR911OR2XL CDR911OR3XL CDR911YW-LGE CDR911YW-MED CDR911YW-XL CDR911YW2XL CDR911YW3XL CDRBT31AT4BYF CDRBT31CA4BYE CDRBT31DA4BR CDRBT31DA4BY CDRBT31DD4BRE CDRBT31DD4BRF CDRBT32AT4BYF CDRBT32CA4BYE CDRBT32DA4BR CDRBT32DA4BY CDRBT32DD4BRE CDRBT32DD4BRF CDRC101SB-GHC CDRC101SB-RHC CDRC101SS-BLHC CDRC101SS-GHC CDRCA1012UC CDRCA1012UC-DISP CDRCA1013UC CDRCA1101B-AHC CDRCA1101B-CHC CDRCA1101B-GHC CDRCA1101B-IO

Page 354 354 354 354 354 354 359 359 359 346 346 346 346 346 346 346 346 346 346 356 356 356 356 356 356 356 356 359 359 358 358 328 328 328 328 328 328 328 328 328 328 328 328 359 327 327 327 327 327 327 327 327 327 327 327 327 346 346 346 346 346 346 346 346 346 346 350 350 350 350 350 350 350 350 350 350 350 350 354 354 354 354 357 357 356 355 355 355 355

Item No. CDRCA1101B-SM CDRCA1101BL-CHC CDRCA1101BL-GHC CDRCA1112AHC CDRCA1112CAF CDRCA1112CHC CDRCA1112GHC CDRCA1112IO CDRCA1112SM CDRCA1113AHC CDRCA1113CAF CDRCA1113CHC CDRCA1113GHC CDRCA1113IO CDRCA1113SM CDRCA1117B-AHC CDRCA1117B-CAF CDRCA1117B-CHC CDRCA1117B-GHC CDRCA1117B-IO CDRCA1117B-SM CDRCA3MFS CDRCA5101UC CDRCA5103CAF CDRCA6302 CDRCA6501CL CDRCA6501GN CDRCA6503-5 CDRCALT2XL CDRCALT3XL CDRCALT4XL CDRCALT5XL CDRCALTL CDRCALTM CDRCALTXL CDRCHEALT2XL CDRCHEALT3XL CDRCHEALT4XL CDRCHEALT5XL CDRCHEALTL CDRCHEALTM CDRCHEALTXL CDRCHEPOLY2XL CDRCHEPOLY3XL CDRCHEPOLY4XL CDRCHEPOLY5XL CDRCHEPOLYL CDRCHEPOLYM CDRCHEPOLYXL CDRDAP3P2842 CDRDAP4A2842 CDRDAP5M2842 CDRDBC3P17 CDRDBC4A17 CDRDBC5M17 CDRDBC5M175 CDRDCA4A-L CDRDCA4A-M CDRDCA4A-XL CDRDCA4A2XL CDRDCA4A3XL CDRDCA4A45XL CDRDCA4A4XL CDRDCL3P-L CDRDCL3P-M CDRDCL3P-S CDRDCL3P-XL CDRDCL3P2XL CDRDCL3P3XL CDRDCL4A-L CDRDCL4A-M CDRDCL4A-S CDRDCL4A-XL CDRDCL4A2XL CDRDCL4A3XL CDRDCL5M-L CDRDCL5M-M CDRDCL5M-S CDRDCL5M-XL CDRDCL5M2XL CDRDCL5M3XL CDRDSC3P18 CDRDSC4A18 CDRDSC5M18 CDRDSG2P-L CDRDSG2P-M CDRDSG2P-XL CDRDSG2P2XL CDRDSL3P16

www.westwardtools.ca

Page 355 355 355 354 354 354 354 354 354 355 355 355 355 355 355 355 355 355 355 355 355 358 357 357 357 357 357 357 334 334 334 334 334 334 334 334 334 334 334 334 334 334 335 335 335 335 335 335 335 336 336 336 335 336 334 334 336 336 336 336 336 336 336 335 335 335 335 335 335 336 336 336 336 336 336 334 334 334 334 334 334 335 336 334 335 335 335 335 335

Item No. CDRDSL3P18 CDRDSL3P22 CDRDSL4A16 CDRDSL4A18 CDRDSL4A22 CDRDSL5M16 CDRDSL5M18 CDRDSL5M22 CDREM105 CDREM106 CDREM109A CDRFEP03 CDRFEP03C CDRFEP03D500 CDRFEP03D500R CDRFEP04T CDRFEP04TC CDRFEP07 CDRFEP12 CDRFEP12-5R CDRFPBS1 CDRFPH3D CDRFPH5D CDRFPL6E4 CDRFPL6E6 CDRFS27CA CDRFS27CL CDRFS27WF CDRGCR1GRH10 CDRGCR1GRH7 CDRGCR1GRH8 CDRGCR1GRH9 CDRGCR1GRHW10 CDRGCR1GRHW7 CDRGCR1GRHW8 CDRGCR1GRHW9 CDRGDN5PF10 CDRGDN5PF8 CDRGDN5PF9 CDRGKL1BLP10 CDRGKL1BLP7 CDRGKL1BLP8 CDRGKL1BLP9 CDRGKN1GP10 CDRGKN1GP11 CDRGKN1GP6 CDRGKN1GP7 CDRGKN1GP8 CDRGKN1GP9 CDRGKN2BLP10 CDRGKN2BLP6 CDRGKN2BLP7 CDRGKN2BLP8 CDRGKN2BLP9 CDRGKN2BP10 CDRGKN2BP11 CDRGKN2BP12 CDRGKN2BP6 CDRGKN2BP7 CDRGKN2BP8 CDRGKN2BP9 CDRGKN3GF10 CDRGKN3GF6 CDRGKN3GF7 CDRGKN3GF8 CDRGKN3GF9 CDRGKP1GP10 CDRGKP1GP7 CDRGKP1GP8 CDRGKP1GP9 CDRGP10PG-LGE CDRGP10PG-MED CDRGP10PG-SM CDRGP10PG-XL CDRGP10PG-XXL CDRGP14DG-LGE CDRGP14DG-MED CDRGP14DG-SM CDRGP14DG-XL CDRGP14DG-XXL CDRGP7K-LGE CDRGP7K-MED CDRGP7K-SM CDRGP7K-XL CDRGP7K-XXL CDRGRN11U10 CDRGRN11U11 CDRGRN11U7 CDRGRN11U8

Page 335 335 336 336 336 334 334 334 353 353 353 352 352 352 352 352 352 352 353 353 341 360 360 360 360 324 324 324 332 332 332 332 332 332 332 332 333 333 333 328 328 328 328 329 329 329 329 329 329 329 329 329 329 329 329 329 329 329 329 329 329 329 329 329 329 329 327 327 327 327 330 330 330 330 330 330 330 330 330 330 330 330 330 330 330 332 332 332 332

Item No. CDRGRN11U9 CDRGRN15F10 CDRGRN15F11 CDRGRN15F7 CDRGRN15F8 CDRGRN15F9 CDRGRN9U10 CDRGRN9U7 CDRGRN9U8 CDRGRN9U9 CDRHBC1BK CDRHBC1GRD CDRHBC1GYW CDRHBC1NY CDRHBC1RD CDRHBC1RS CDRHBC1WH CDRHBC2BK CDRHBC2GRD CDRHBC2NY CDRHBC2RD CDRHBC2YW CDRHH1RCSA-GRD CDRHH1RCSA-NY CDRHH1RCSA-OR CDRHH1RCSA-RD CDRHH1RCSA-WH CDRHH1RCSA-YW CDRHHR1CS2 CDRHHR1S CDRM1001 CDRRC1PP-L CDRRC1PP-M CDRRC1PP-S CDRRC1PP-XL CDRRC1PP2XL CDRRC1PP3XL CDRRP1P CDRRP1P-S CDRRP2PP CDRRP2PP-S CDRRS2PU-L CDRRS2PU-M CDRRS2PU-S CDRRS2PU-XL CDRRS2PU2XL CDRRS2PU3XL CDRRS3FR-L CDRRS3FR-M CDRRS3FR-S CDRRS3FR-XL CDRRS3FR2XL CDRRS3FR3XL CDRRS3FRJ-L CDRRS3FRJ-M CDRRS3FRJ-S CDRRS3FRJ-XL CDRRS3FRJ2XL CDRRS3FRJ3XL CDRRS3FRP-L CDRRS3FRP-M CDRRS3FRP-S CDRRS3FRP-XL CDRRS3FRP2XL CDRRS3FRP3XL CDRRS3PP-L CDRRS3PP-M CDRRS3PP-S CDRRS3PP-XL CDRRS3PP2XL CDRRS3PP3XL CDRRS3PPJ-L CDRRS3PPJ-M CDRRS3PPJ-S CDRRS3PPJ-XL CDRRS3PPJ2XL CDRRS3PPJ3XL CDRRS3PPP-L CDRRS3PPP-M CDRRS3PPP-S CDRRS3PPP-XL CDRRS3PPP2XL CDRRS3PPP3XL CDRSF4850 CDRTBJ1CSA-OR-L CDRTBJ1CSA-OR-M CDRTBJ1CSA-OR-XL CDRTBJ1CSA-OR2XL CDRTBJ1CSA-OR3XL

Page 332 332 332 332 332 332 332 332 332 332 351 351 351 351 351 351 351 351 351 351 351 351 351 351 351 351 351 351 351 351 358 337 337 337 337 337 337 337 337 337 337 338 338 338 338 338 338 338 338 338 338 338 338 338 338 338 338 338 338 338 338 338 338 338 338 337 337 337 337 337 337 337 337 337 337 337 337 337 337 337 337 337 337 324 348 348 348 348 348

Item No.

Page

CDRTBJ1CSA-YW-L 348 CDRTBJ1CSA-YW-M 348 CDRTBJ1CSA-YW-XL 348 CDRTBJ1CSA-YW2XL 348 CDRTBJ1CSA-YW3XL 348 CDRTCPVC12 350 CDRTCPVC18 350 CDRTCPVC28 350 CDRTCPVC6 350 CDRTHCSA-OR-L 346 CDRTHCSA-OR-M 346 CDRTHCSA-OR-XL 346 CDRTHCSA-OR2XL 346 CDRTHCSA-OR3XL 346 CDRTHCSA-YW-L 346 CDRTHCSA-YW-M 346 CDRTHCSA-YW-XL 346 CDRTHCSA-YW2XL 346 CDRTHCSA-YW3XL 346 CDRTHY-OR-L 344 CDRTHY-OR-M 344 CDRTHY-OR-XL 344 CDRTHY-OR2XL 344 CDRTJV21CSA-OR-L 345 CDRTJV21CSA-OR-M 345 CDRTJV21CSA-OR-XL 345 CDRTJV21CSA-OR2XL 345 CDRTJV21CSA-OR3XL 345 CDRTJV21CSA-YW-L 345 CDRTJV21CSA-YW-M 345 CDRTJV21CSA-YW-XL 345 CDRTJV21CSA-YW2XL 345 CDRTJV21CSA-YW3XL 345 CDRTJV312CSA-OR-L 347 CDRTJV312CSA-OR-M 347 CDRTJV312CSA-OR-XL 347 CDRTJV312CSA-OR2XL 347 CDRTJV312CSA-OR3XL 347 CDRTJV312CSA-YW-L 347 CDRTJV312CSA-YW-M 347 CDRTJV312CSA-YW-XL 347 CDRTJV312CSA-YW2XL 347 CDRTJV312CSA-YW3XL 347 CDRTLC1CSA-OR-L 347 CDRTLC1CSA-OR-M 347 CDRTLC1CSA-OR-XL 347 CDRTLC1CSA-OR2XL 347 CDRTLC1CSA-OR3XL 347 CDRTLC1CSA-YW-L 347 CDRTLC1CSA-YW-M 347 CDRTLC1CSA-YW-XL 347 CDRTLC1CSA-YW2XL 347 CDRTLC1CSA-YW3XL 347 CDRTP-OR-L 349 CDRTP-OR-M 349 CDRTP-OR-XL 349 CDRTP-OR2XL 349 CDRTP-OR3XL 349 CDRTP-YW-L 349 CDRTP-YW-M 349 CDRTP-YW-XL 349 CDRTP-YW2XL 349 CDRTP-YW3XL 349 CDRTP913OR-L 348 CDRTP913OR-M 348 CDRTP913OR-XL 348 CDRTP913OR2XL 348 CDRTP913OR3XL 348 CDRTP913YW-L 348 CDRTP913YW-M 348 CDRTP913YW-XL 348 CDRTP913YW2XL 348 CDRTP913YW3XL 348 CDRTRJCSA-OR-L 349 CDRTRJCSA-OR-M 349 CDRTRJCSA-OR-XL 349 CDRTRJCSA-OR2XL 349 CDRTRJCSA-OR3XL 349 CDRTRP-OR-L 349 CDRTRP-OR-M 349 CDRTRP-OR-XL 349 CDRTRP-OR2XL 349 CDRTRP-OR3XL 349 CDRTSCSA-OR-L 344 CDRTSCSA-OR-M 344 CDRTSCSA-OR-XL 344 CDRTSCSA-OR2XL 344 CDRTSCSA-OR3XL 344 CDRTSCSA-YW-L 344

Item No.

Page

CDRTSCSA-YW-M CDRTSCSA-YW-XL CDRTSCSA-YW2XL CDRTSCSA-YW3XL CDRTV1OR CDRTV1YW CDRTV2M-OR CDRTV2M-YW CDRTV5CSA-OR-L CDRTV5CSA-OR-M CDRTV5CSA-OR-XL CDRTV5CSA-OR2XL CDRTV5CSA-YW-L CDRTV5CSA-YW-M CDRTV5CSA-YW-XL CDRTV5CSA-YW2XL CDRTV5CSAM-OR-L CDRTV5CSAM-OR-M CDRTV5CSAM-OR-XL CDRTV5CSAM-OR2XL CDRTV5CSAM-YW-L CDRTV5CSAM-YW-M CDRTV5CSAM-YW-XL CDRTV5CSAM-YW2XL CDRTVCSA-OR CDRTVCSA-OR-OS CDRTVCSA-YW CDRTVCSA-YW-OS CDRTVCSAM-OR CDRTVCSAM-OR-OS CDRTVCSAM-YW CDRTVCSAM-YW-OS CDRTVSCSA-OR-L CDRTVSCSA-OR-M CDRTVSCSA-OR-XL CDRTVSCSA-OR2XL CDRTVSCSA-OR3XL CDRTVSCSA-YW-L CDRTVSCSA-YW-M CDRTVSCSA-YW-XL CDRTVSCSA-YW2XL CDRTVSCSA-YW3XL CDRUM46B CDRWAL-BR CDRWASLL36BR CDRWASLL42BR CDRWASLL48BR CDRWAWL18BR CDRWAWL24BR CDRWBDL-BR CDRWBL-BR-L CDRWBL-BR-M CDRWBL-BR-XL CDRWBL-BR2XL CDRWBQ5BR-L CDRWBQ5BR-M CDRWBQ5BR-XL CDRWBQ5BR2XL CDRWBQ5BR3XL CDRWCA1NY38 CDRWCA1NY40 CDRWCA1NY42 CDRWCA1NY44 CDRWCA1NY46 CDRWCA1NY48 CDRWCA1NY50 CDRWCA1NY52 CDRWCA1NY54 CDRWCA1NY56 CDRWCA2NYR38 CDRWCA2NYR40 CDRWCA2NYR42 CDRWCA2NYR44 CDRWCA2NYR46 CDRWCA2NYR48 CDRWCA2NYR50 CDRWCA2NYR52 CDRWCA2NYR54 CDRWCA2NYR56 CDRWCA3ORR38 CDRWCA3ORR40 CDRWCA3ORR42 CDRWCA3ORR44 CDRWCA3ORR46 CDRWCA3ORR48 CDRWCA3ORR50 CDRWCA3ORR52 CDRWCA3YWR38 CDRWCA3YWR40

344 344 344 344 343 343 343 343 342 342 342 342 342 342 342 342 343 343 343 343 343 343 343 343 342 342 342 342 342 342 342 342 344 344 344 344 344 344 344 344 344 344 341 302 303 303 303 303 303 303 303 303 303 303 340 340 340 340 340 339 339 339 339 339 339 339 339 339 339 339 339 339 339 339 339 339 339 339 339 345 345 345 345 345 345 345 345 345 345

405

W405-10 - W413-10_reverseindex.qxp

2/9/10

11:14 AM

Page 406

REVERSE INDEX Item No. CDRWCA3YWR42 CDRWCA3YWR44 CDRWCA3YWR46 CDRWCA3YWR48 CDRWCA3YWR50 CDRWCA3YWR52 CDRWCQ5BR-L CDRWCQ5BR-M CDRWCQ5BR-XL CDRWCQ5BR2XL CDRWCQ5BR3XL CDRWCSL-BR-L CDRWCSL-BR-M CDRWCSL-BR-XL CDRWCSL-BR2XL CDRWJL30BR-L CDRWJL30BR-M CDRWJL30BR-XL CDRWJL30BR2XL CDRWJL30BR3XL CDRWJQ5BR-L CDRWJQ5BR-M CDRWJQ5BR-XL CDRWJQ5BR2XL CDRWJQ5BR3XL CDRWSC1NY-L CDRWSC1NY-M CDRWSC1NY-S CDRWSC1NY-XL CDRWSC1NY2XL CDRWSC1NY3XL CDRWSC1WH-L CDRWSC1WH-M CDRWSC1WH-S CDRWSC1WH-XL CDRWSC1WH2XL CDRWSC1WH3XL CDRWSL18BR CDRWVT5BR-L CDRWVT5BR-M CDRWVT5BR-XL CDRWVT5BR2XL CDRWVT5BR3XL WSW100 WSW101 WSW108-5 WSW108-5STR WSW109K WSW2002A WSW20W WSW3-155 WSW400 WSW4002 WSW4003 WSW4003NS WSW4004 WSW4005 WSW4006 WSW4006NS WSW4008 WSW4010 WSW4012 WSW42000S WSW45000S WSW485 WSW486 WSW487 WSW492 WSW495 WSW496 WSW4YX96 WSW4YX97 WSW500-10 WSW500-6 WSW500-8 WSW510-10 WSW510-12 WSW510-16 WSW510-20 WSW510-8 WSW5LD47 WSW5LD48 WSW5LD49 WSW5LD50 WSW5LD51 WSW5LD52 WSW5LD53 WSW5LD54 WSW5LD55

406

Page 345 345 345 345 345 345 341 341 341 341 341 302 302 302 302 302 302 302 302 302 340 340 340 340 340 339 339 339 339 339 339 339 339 339 339 339 339 302 340 340 340 340 340 257 257 122 122 124 388 223 13 392 201 201 317 201 201 201 317 201 201 201 272 272 182 182 182 181 182 182 286 286 161 161 161 162 162 162 162 162 233 233 232 233 232 235 233 233 233

Item No. WSW5LD56 WSW5LD57 WSW5LD59 WSW5LD60 WSW5LD61 WSW5LD62 WSW5LD66 WSW5NP21 WSW6JR79 WSW6JR80 WSW6JR81 WSW6JR82 WSW6JR83 WSW6JR85 WSW6JR86 WSW6JR87 WSW6JR88 WSW6JR89 WSW6JR91 WSW6JR92 WSW6JR93 WSW6JR94 WSW701-2 WSW701-2W WSW7016TT WSW7025C WSW7108 WSW7108H WSW7112 WSW7116 WSW7116H WSW7124 WSW7124H WSW7132 WSW7132H WSW7140 WSW7140H WSW7148 WSW7148H WSW716 WSW716PIN WSW716W WSW717 WSW733 WSW734 WSW734P WSW734W WSW735 WSW8000 WSW9000 WSW9001M WSW9016M WSW9016NS WSW9020M WSW9020MP WSW9108M WSW9116M WSW9116MP WSW9124M WSW9124MP WSW9132M WSW9140M WSW9200 WSW9300 WSW9400 WSW9516M WSW9520M WSWA0701S WSWA1 WSWA10 WSWA108 WSWA11 WSWA12 WSWA120 WSWA121 WSWA123 WSWA124 WSWA13 WSWA14 WSWA15 WSWA150 WSWA153 WSWA154 WSWA16 WSWA162 WSWA163 WSWA164 WSWA165 WSWA166

Page 235 232 232 232 232 236 235 286 236 215, 237 234 234 235 235 232 236 233 234 238 234 232 232 181 181 323 187 186 186 186 186 186 186 186 186 186 186 186 186 186 180 180 180 180 181 180 180 180 181 388 388 187 187 321 187 187 186 186 186 186 186 186 186 188 188 188 187 187 271 247 394 393 392 393 393 391 397 397 247 389 26 389 389 195 25 244 245 244 246 246

Item No. WSWA167 WSWA17 WSWA18 WSWA19 WSWA19-10NS WSWA19-7NS WSWA2 WSWA20 WSWA200 WSWA20060 WSWA201 WSWA202 WSWA203 WSWA204 WSWA21 WSWA22 WSWA23 WSWA24 WSWA26 WSWA28 WSWA3 WSWA30 WSWA31 WSWA32 WSWA33 WSWA4 WSWA5 WSWA54 WSWA55 WSWA6 WSWA64 WSWA67 WSWA7 WSWA78 WSWA79 WSWA8 WSWA85 WSWA86 WSWA87 WSWA88 WSWA9 WSWA91 WSWA92 WSWA99 WSWAB3 WSWAB4 WSWAC1 WSWAC2 WSWAC3 WSWAC4 WSWAC5 WSWAC6 WSWAC7 WSWAC8 WSWAC9 WSWACK5 WSWACK9 WSWAF10 WSWAF150 WSWAF4 WSWAF500 WSWAF60151 WSWAF60152 WSWAF60153 WSWAF60154 WSWAF60155 WSWAF60156 WSWAF60180 WSWAF60181 WSWAF60182 WSWAF60183 WSWAF60184 WSWAF60620 WSWAF60621 WSWAF60622 WSWAFL60610WB WSWAFL60611WB WSWAFL60612WB WSWAFL60613WB WSWAFR60351C WSWAFR60352C WSWAFR60353C WSWAFR60354C WSWAFR60355C WSWAFR60356C WSWAFR60380C WSWAFR60381C WSWAFR60382C WSWAFR60383C

Page 245 25 197 197 316 316 169 238 281 267 281 281 245 245 320 390 390 392 394 393 246 281 390 390 390 196 196 90 90 196 393 394 197 246 246 196 246 247 247 389 394 397 397 394 398 398 366 366 366 366 366 366 366 366 366 366 366 237 237 237 238 369 369 369 369 369 369 369 369 369 369 369 371 371 371 370 370 370 370 371 371 371 371 371 371 371 371 371 371

Item No. WSWAFR60384C WSWAFRL60450C WSWAFRL60451C WSWAFRL60452C WSWAFRL60453C WSWAFRL60454C WSWAFRL60480C WSWAFRL60481C WSWAFRL60482C WSWAFRL60483C WSWAFRL60484C WSWAFRL60550C WSWAFRL60551C WSWAFRL60552C WSWAFRL60553C WSWAFRL60554C WSWAFRL60580C WSWAFRL60581C WSWAFRL60582C WSWAFRL60583C WSWAFRL60584C WSWAFRL60600WB WSWAFRL60601WB WSWAFRL60602WB WSWAFRL60603WB WSWAFRL60640WB WSWAFRL60641WB WSWAFRL60642WB WSWAFRL60643WB WSWAG10 WSWAG12 WSWAG6 WSWAG8 WSWAJ33 WSWAJ48 WSWAJ60 WSWAK1 WSWAK2 WSWAK3 WSWAK40 WSWAK40M WSWAL10 WSWAL12 WSWAL6 WSWAL60251 WSWAL60252 WSWAL60253 WSWAL60254 WSWAL60255 WSWAL60280 WSWAL60281 WSWAL60282 WSWAL60283 WSWAL60284 WSWAL8 WSWAP10 WSWAP12 WSWAP15 WSWAP18 WSWAP24 WSWAP4 WSWAP6 WSWAP8 WSWAP8DR WSWAPG60635 WSWAPG60636 WSWAR10 WSWAR6 WSWAR60051 WSWAR60052 WSWAR60053 WSWAR60054 WSWAR60055 WSWAR60056 WSWAR8 WSWARK3 WSWATA1 WSWATA10 WSWATA11 WSWATA12 WSWATA13 WSWATA14 WSWATA15 WSWATA16 WSWATA17 WSWATA18 WSWATA19 WSWATA21 WSWATA22

Page 371 372 372 372 372 372 372 372 372 372 372 373 373 373 373 373 373 373 373 373 373 370 370 370 370 370 370 370 370 119 119 119 119 277 277 277 197 196 169 213 213 120 120 120 370 370 370 370 370 370 370 370 370 370 120 120 120 120 120 120 120 120 120 120 371 371 121 121 369 369 369 369 369 369 121 121 368 368 368 368 368 368 368 368 368 368 368 368 368

Item No.

Page

WSWATA23 WSWATA26 WSWATA3 WSWATA34 WSWATA35 WSWATA38 WSWATA39 WSWATA4 WSWATA5 WSWATA6 WSWATA7 WSWATA8 WSWATA9 WSWATC3 WSWATD12R WSWATD38A WSWATD38R WSWATG14 WSWATG14A WSWATG14M WSWATH25 WSWATM11 WSWATM121 WSWATM122 WSWATM123 WSWATM15 WSWATM1P WSWATM341 WSWATN38 WSWATR12 WSWATR14 WSWATR38 WSWATS25 WSWATT14H WSWATT14L WSWAW10NS WSWAW10TT WSWAW12NS WSWAW15NS WSWAW6NS WSWAW8NS WSWAX1 WSWB000242 WSWB000254 WSWB1200 WSWB1500 WSWB1500S WSWB520 WSWB522 WSWB529 WSWB632 WSWB803 WSWB810 WSWB842 WSWB848 WSWB853 WSWB860 WSWB891 WSWB896 WSWB899 WSWB916 WSWB933 WSWBC12 WSWBC12JH WSWBC14 WSWBC14JH WSWBC18 WSWBC18JH WSWBC24 WSWBC24JH WSWBC30 WSWBC30JH WSWBC36 WSWBC36JH WSWBC8 WSWBDH WSWBDS WSWBDU WSWBDW WSWBG10D WSWBG12D WSWBG6C WSWBG6D WSWBG8C WSWBG8D WSWBGS WSWBHM14-60 WSWBHM14-60Q WSWBKC155

368 396 368 368 368 368 368 368 368 368 368 368 368 364 365 365 365 363 363 363 366 363 362 362 362 363 362 362 365 363 363 363 365 365 365 308 322 308 308 308 308 190 38 38 198 198 198 26 26 26 26 31 31 33 32 32 31 32 32 31 44 44 180 180 180 180 180 180 180 180 180 180 180 180 180 398 398 398 398 295 295 295 295 295 295 295 145 145 20

Item No. WSWBKC64 WSWBKC91 WSWBL02941 WSWBL02954 WSWBL02981 WSWBNS5010M WSWBNS506M WSWBNS507M WSWBNS508M WSWBNS56-10 WSWBNS56-12 WSWBNS56-8 WSWBNS6510M WSWBNS656M WSWBNS657M WSWBNS658M WSWBNS80-10 WSWBNS80-12 WSWBNS80-8 WSWBR710 WSWBR796 WSWBR854 WSWBR855 WSWBR865 WSWBRH14NS WSWBRK7 WSWBSH253M WSWBSH253MP WSWBSH254 WSWBSH2545 WSWBSH2545P WSWBSH254M WSWBSH254MP WSWBSH254P WSWBSH255 WSWBSH255M WSWBSH255MP WSWBSH255P WSWBSH256 WSWBSH256M WSWBSH256MP WSWBSH256P WSWBSH257 WSWBSH257P WSWBSH258 WSWBSH258P WSWBSH503M WSWBSH503MP WSWBSH504 WSWBSH5045 WSWBSH5045P WSWBSH504M WSWBSH504MP WSWBSH504P WSWBSH505 WSWBSH505M WSWBSH505MP WSWBSH505P WSWBSH506 WSWBSH506M WSWBSH506MP WSWBSH506P WSWBSH507 WSWBSH507P WSWBSH508 WSWBSH508P WSWBSP251 WSWBSP251P WSWBSP252 WSWBSP252P WSWBSP253 WSWBSP253P WSWBSP501 WSWBSP501P WSWBSP502 WSWBSP502P WSWBSP503 WSWBSP503P WSWBSPZ251 WSWBSPZ251P WSWBSPZ252 WSWBSPZ252P WSWBSPZ253 WSWBSPZ253P WSWBSPZ501 WSWBSPZ501P WSWBSPZ502 WSWBSPZ502P WSWBSPZ503

Page 19 20 36 38 36 145 145 145 145 145 145 145 145 145 145 145 145 145 145 35 35 35 36 35 321 397 148 148 148 148 148 148 148 148 148 148 148 148 148 148 148 148 148 148 148 148 147 147 147 147 147 147 147 147 147 147 147 147 147 147 147 147 147 147 147 147 148 148 148 148 148 148 146 146 146 146 146 146 149 149 149 149 149 149 147 147 147 147 147

www.westwardtools.ca

W405-10 - W413-10_reverseindex.qxp

2/9/10

11:14 AM

Page 407

REVERSE INDEX Item No. WSWBSPZ503P WSWBSS254M WSWBSS254MP WSWBSS2555M WSWBSS2555MP WSWBSS2565M WSWBSS2565MP WSWBSS258M WSWBSS258MP WSWBSS504M WSWBSS504MP WSWBSS5055M WSWBSS5055MP WSWBSS5065M WSWBSS5065MP WSWBSS508M WSWBSS508MP WSWBSSQ251 WSWBSSQ251P WSWBSSQ252 WSWBSSQ252P WSWBSSQ253 WSWBSSQ253P WSWBSSQ501 WSWBSSQ501P WSWBSSQ502 WSWBSSQ502P WSWBSSQ503 WSWBSSQ503P WSWBST2510 WSWBST2510P WSWBST2515 WSWBST2515P WSWBST2520 WSWBST2520P WSWBST2525 WSWBST2525P WSWBST2527 WSWBST2527P WSWBST2530 WSWBST2530P WSWBST2540 WSWBST2540P WSWBST258 WSWBST258P WSWBST5010 WSWBST5010P WSWBST5015 WSWBST5015P WSWBST5020 WSWBST5020P WSWBST5025 WSWBST5025P WSWBST5027 WSWBST5027P WSWBST5030 WSWBST5030P WSWBST5040 WSWBST5040P WSWBT19C WSWBT6S WSWBT8C WSWBTK19C WSWBTK8C WSWBW305NS WSWBW385NS WSWC1 WSWC1B WSWCAN6 WSWCAU6 WSWCB13S12 WSWCB1Q12 WSWCB1S12 WSWCBB814DC WSWCBB918DC WSWCBG12 WSWCBG18 WSWCBG8 WSWCBK14 WSWCBK16M WSWCBT12 WSWCBT18 WSWCBT24 WSWCBT36 WSWCBT6 WSWCF10M WSWCF11M WSWCF12M WSWCF13M

Page 147 149 149 149 149 149 149 149 149 147 147 147 147 147 147 147 147 148 148 148 148 148 148 146 146 146 146 146 146 149 149 149 149 149 149 149 149 149 149 149 149 149 149 149 149 146 146 146 146 146 146 146 146 146 146 146 146 146 146 304 304 304 304 304 320 320 181 181 236 236 201 201 201 228 228 202 202 202 20 20 202 202 202 202 202 62 62 62 62

Item No. WSWCF14M WSWCF15M WSWCF16M WSWCF17M WSWCF200 WSWCF201 WSWCF202 WSWCF203 WSWCF204 WSWCF205 WSWCF206 WSWCF208 WSWCFK9 WSWCFK9M WSWCM06 WSWCM07 WSWCM08 WSWCM09 WSWCM10 WSWCM10NS WSWCM10TT WSWCM11 WSWCM11NS WSWCM11TT WSWCM12 WSWCM12NS WSWCM12TT WSWCM13 WSWCM13NS WSWCM13TT WSWCM14 WSWCM14NS WSWCM14TT WSWCM15 WSWCM15NS WSWCM16 WSWCM16NS WSWCM17 WSWCM17NS WSWCM17TT WSWCM18 WSWCM18NS WSWCM19 WSWCM19NS WSWCM19TT WSWCM20 WSWCM20NS WSWCM21 WSWCM21NS WSWCM22 WSWCM22NS WSWCM23 WSWCM24 WSWCM24NS WSWCM25 WSWCM25NS WSWCM26 WSWCM26NS WSWCM27 WSWCM27NS WSWCM28 WSWCM28NS WSWCM29 WSWCM29NS WSWCM30 WSWCM30NS WSWCM32 WSWCM32NS WSWCM36NS WSWCM6TT WSWCM7TT WSWCM8NS WSWCM9NS WSWCM9TT WSWCMIK30 WSWCMK16R WSWCMK26 WSWCP07M WSWCP08 WSWCP08M WSWCP09M WSWCP10 WSWCP10M WSWCP11M WSWCP12 WSWCP12M WSWCP13M WSWCP14 WSWCP14M

www.westwardtools.ca

Page 62 62 62 62 62 62 62 62 62 62 62 62 54 54 104 104 104 104 104 309 322 104 309 322 104 309 322 104 309 322 104 309 322 104 309 104 309 105 309 322 105 309 105 309 322 105 309 105 309 105 309 105 105 309 105 309 105 309 105 309 105 309 105 309 105 309 105 309 309 322 322 309 309 322 17 102 102 103 103 103 103 103 103 103 103 103 103 103 103

Item No. WSWCP15M WSWCP16 WSWCP16M WSWCP17M WSWCP18 WSWCP18M WSWCP19M WSWCP20 WSWCP20M WSWCP21M WSWCP22 WSWCP22M WSWCP23M WSWCP24 WSWCP24M WSWCP25M WSWCP26 WSWCP27M WSWCP28 WSWCP30 WSWCP30M WSWCP32 WSWCP32M WSWCP34 WSWCP36 WSWCP40 WSWCP42 WSWCP44 WSWCP48 WSWCPK11 WSWCPK14 WSWCPK16 WSWCPK16M WSWCPK21M WSWCR10SM WSWCR11SM WSWCR12S WSWCR12SM WSWCR13SM WSWCR14S WSWCR14SM WSWCR16S WSWCR17SM WSWCR18S WSWCR19SM WSWCR20S WSWCR22S WSWCR24S WSWCRK16 WSWCRK18M WSWCRK8S WSWCRK8SM WSWCS12 WSWCSS4 WSWCV100 WSWCV100W WSWCV140 WSWCV140W WSWCV190 WSWCV190W WSWCV200L WSWCV200LW WSWCV200M WSWCV280 WSWCV280W WSWCV292 WSWCV292W WSWCV340 WSWCV340W WSWCV368 WSWCV368W WSWCV380 WSWCV380W WSWCV4 WSWCV450 WSWCV450W WSWCV5 WSWCV6 WSWCV610 WSWCV610W WSWCV762 WSWCV762W WSWCW10TT WSWCW12NS WSWCW12TT WSWCW14NS WSWCW14TT WSWCW16NS WSWCW16TT

Page 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 100 100 100 101 100 106 106 106 106 106 106 106 106 106 106 106 106 106 106 102 102 105 105 238 277 258 258 258 258 258 258 258 258 258 258 258 258 258 258 258 258 258 258 258 202 258 258 202 202 258 258 258 258 322 309 322 309 322 309 322

Item No.

Page

WSWCW18NS 309 WSWCW18TT 322 WSWCW197 104 WSWCW198 104 WSWCW199 104 WSWCW200 104 WSWCW201 104 WSWCW202 104 WSWCW203 104 WSWCW204 104 WSWCW205 104 WSWCW206 104 WSWCW207 104 WSWCW208 104 WSWCW209 104 WSWCW20NS 309 WSWCW20TT 322 WSWCW210 104 WSWCW211 104 WSWCW212 104 WSWCW213 104 WSWCW22NS 309 WSWCW22TT 322 WSWCW24NS 309 WSWCW24TT 322 WSWCW26NS 309 WSWCW28NS 309 WSWCW301 104 WSWCW302 104 WSWCW303 104 WSWCW304 104 WSWCW305 104 WSWCW306 104 WSWCW307 104 WSWCW308 104 WSWCW309 104 WSWCW30NS 309 WSWCW310 104 WSWCW311 104 WSWCW312 104 WSWCW313 104 WSWCW314 104 WSWCW32NS 309 WSWCW34NS 309 WSWCW36NS 309 WSWCW40NS 309 WSWCW42NS 309 WSWCW44NS 309 WSWCW46NS 309 WSWCW48NS 309 WSWCWK11R 101 WSWCWK14R 101 WSWCWK8 101 WSWDB1 208 WSWDB29 208 WSWDC800 284 WSWDD750 284 WSWDG1 210, 237 WSWDG68 285 WSWDL30 285 WSWDMK12612 65 WSWDMK1409 47 WSWDMK3814 53 WSWDMS12610 71 WSWDMS12611 71 WSWDMS12612 71 WSWDMS12613 71 WSWDMS12614 71 WSWDMS12615 71 WSWDMS12616 71 WSWDMS12617 71 WSWDMS12618 71 WSWDMS12619 71 WSWDMS12620 71 WSWDMS12621 71 WSWDMS12622 71 WSWDMS12623 71 WSWDMS12624 71 WSWDMS12625 71 WSWDMS12626 71 WSWDMS12627 71 WSWDMS12628 71 WSWDMS12629 71 WSWDMS12630 71 WSWDMS12632 71 WSWDMS1404 50 WSWDMS1405 50 WSWDMS1406 50 WSWDMS1407 50

Item No. WSWDMS1408 WSWDMS1409 WSWDMS1410 WSWDMS1411 WSWDMS1412 WSWDMS38606 WSWDMS38607 WSWDMS38608 WSWDMS38609 WSWDMS38610 WSWDMS38611 WSWDMS38612 WSWDMS38613 WSWDMS38614 WSWDMS38615 WSWDMS38616 WSWDMS38617 WSWDMS38618 WSWDMS38619 WSWDP170F WSWDP2000 WSWDP270F WSWDPA80 WSWDPB10 WSWDPE80 WSWDRJ1132 WSWDRJ116 WSWDRJ1164 WSWDRJ12 WSWDRJ132 WSWDRJ1332 WSWDRJ1364 WSWDRJ14 WSWDRJ1532 WSWDRJ1564 WSWDRJ164 WSWDRJ1764 WSWDRJ18 WSWDRJ1964 WSWDRJ2164 WSWDRJ2364 WSWDRJ2564 WSWDRJ2764 WSWDRJ2964 WSWDRJ316 WSWDRJ3164 WSWDRJ332 WSWDRJ364 WSWDRJ38 WSWDRJ516 WSWDRJ532 WSWDRJ564 WSWDRJ716 WSWDRJ732 WSWDRJ764 WSWDRJ932 WSWDRJ964 WSWDRP1 WSWDRP1-116 WSWDRP1-14 WSWDRP1-18 WSWDRP1-316 WSWDRP1-38 WSWDRP1116 WSWDRP1316 WSWDRP1516 WSWDRP1732 WSWDRP1932 WSWDRP2132 WSWDRP2332 WSWDRP2532 WSWDRP2732 WSWDRP2932 WSWDRP3132 WSWDRP3364 WSWDRP34 WSWDRP3564 WSWDRP3764 WSWDRP3964 WSWDRP4164 WSWDRP4364 WSWDRP4564 WSWDRP4764 WSWDRP4964 WSWDRP58 WSWDRP78 WSWDRP916 WSWDRS14 WSWDRS18

Page 50 50 50 50 50 59 59 59 59 59 59 59 59 59 59 59 59 59 59 296 296 296 377 320 377 209 209 209 209 209 209 209 209 209 209 209 209 209 209 209 209 209 209 209 209 209 209 209 209 209 209 209 209 209 209 209 209 210 210 210 210 210 210 210 210 210 210 210 210 210 210 210 210 210 210 210 210 210 210 210 210 210 210 210 210 210 210 209 209

Item No. WSWDRS316 WSWDRS964 WSWDS1 WSWDS1-12 WSWDS122A WSWDS122B WSWDS122C WSWDS122D WSWDS122F WSWDS122H WSWDS122I WSWDS122K WSWDS122L WSWDS122M WSWDS122N WSWDS122O WSWDS122P WSWDS122Q WSWDS122R WSWDS126A WSWDS126B WSWDS126C WSWDS126D WSWDS126F WSWDS126H WSWDS126I WSWDS126K WSWDS126L WSWDS126M WSWDS126N WSWDS126O WSWDS126P WSWDS126Q WSWDS126R WSWDS1460 WSWDS1461 WSWDS1462 WSWDS1463 WSWDS1464 WSWDS1465 WSWDS146A WSWDS146B WSWDS146C WSWDS2 WSWDS346L WSWDS346M WSWDS346N WSWDS346O WSWDS346P WSWDS346Q WSWDS346R WSWDS346S WSWDS346T WSWDS346U WSWDS346V WSWDS346X WSWDS346Z WSWDS346ZA WSWDS346ZB WSWDS346ZC WSWDS35 WSWDS3864 WSWDS386A WSWDS386B WSWDS386C WSWDS386D WSWDS386F WSWDS386H WSWDS386I WSWDS386K WSWDS386L WSWDSB13 WSWDSB21 WSWDSB29 WSWDSC3NS WSWDSC5NS WSWDSK1216 WSWDSK12612 WSWDSK12616 WSWDSK1409 WSWDSK3417 WSWDSK3810 WSWDSL4NS WSWDSL6NS WSWDSP18NS WSWDT20 WSWDT205 WSWDW1000 WSWECF1

Page 209 209 214 214 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 50 50 50 50 50 50 50 50 50 214 77 77 77 77 77 77 77 77 77 77 77 77 77 77 77 77 285 59 59 59 59 59 59 59 59 59 59 208 208 208 318 318 65 65 65 47 75 53 318 318 319 284 284 277 275

407

W405-10 - W413-10_reverseindex.qxp

2/9/10

11:15 AM

Page 408

REVERSE INDEX Item No. WSWECF2 WSWEN30012 WSWEN60012 WSWES1250 WSWES750 WSWESB1250 WSWESB1500 WSWESS600 WSWET66B WSWET66BL WSWET66G WSWET66R WSWET66W WSWET66Y WSWF1-1 WSWF2-2 WSWF2-3 WSWF2-4 WSWF2-5 WSWF2-5W WSWF3-2 WSWF3-3 WSWF3-4 WSWF3-5 WSWF820 WSWFA5E13F WSWFA7E5VF WSWFAH100LP WSWFAH50LP WSWFC01-3 WSWFC2Z1 WSWFC34 WSWFC4Z1 WSWFCF18P WSWFCF18PHD WSWFCH20F WSWFCH25 WSWFCH25B WSWFFB10 WSWFFB10NS WSWFFB12 WSWFFB12NS WSWFFB6 WSWFFB8 WSWFFB8NS WSWFFH8 WSWFFS10 WSWFFS12 WSWFFS6 WSWFFS8 WSWFG4H3F WSWFG50-1F WSWFH12 WSWFH12A WSWFH12P WSWFHK23 WSWFHP55 WSWFHRB10 WSWFHRB8 WSWFHRB8NS WSWFK5 WSWFK9 WSWFL5LDSP WSWFLA3AT WSWFLA3DAFC WSWFLA3TATF WSWFLAR2DAT WSWFLAR3TA WSWFLAR6DAF WSWFLD6 WSWFLH3TADP WSWFLL4D6V WSWFLP4DA WSWFLW3C12 WSWFMB10 WSWFMB8 WSWFMS8 WSWFNS2 WSWFP1012FM WSWFP1012M WSWFP1214 WSWFP1214F WSWFP1314FM WSWFP1314M WSWFP1517FM WSWFP1517M WSWFP1618 WSWFP1618F WSWFP1618FM

408

Page 275 255 255 276 276 275 275 275 257 257 257 257 257 257 366 366 366 366 366 366 366 366 366 366 198 364 364 260 260 367 367 201 367 291 291 366 366 366 205 316 205 316 205 205 316 206 205 205 205 205 364 364 121 122 122 17 206 205 205 315 205 205 256 255 256 255 255 255 255 236 256 256 255 350 206 206 206 367 119 118 118 119 119 118 119 118 118 119 119

Item No. WSWFP1921FM WSWFP2022 WSWFP2022F WSWFP2024F WSWFP2428 WSWFP2428F WSWFP810F WSWFP911FM WSWFP911M WSWFPK4 WSWFPK4M WSWFPK6F WSWFPK6FM WSWFPKC8 WSWFRB10 WSWFRB10NS WSWFRB12 WSWFRB6 WSWFRB8 WSWFRB8NS WSWFRS10 WSWFRS12 WSWFRS8 WSWFST6 WSWFTF45PR WSWFTF4830PH WSWFTF60PR WSWFTF7230P WSWFTF7230PH WSWFTF9630P WSWFTF9630PH WSWFU4K WSWFW1 WSWFW2 WSWFW3 WSWFW4 WSWFW5 WSWFWC1 WSWFWP10 WSWFWP65 WSWFWP74 WSWFWP9 WSWFWP95 WSWG1000S WSWG1001S WSWG1300 WSWG20253 WSWG22201 WSWG22903 WSWG22905 WSWG2500S WSWG2501S WSWG25037 WSWG26020 WSWG26023 WSWG29023 WSWG29025 WSWG29037 WSWG30Q0S WSWG40500 WSWG40700 WSWG42003 WSWG4232S WSWG43000 WSWG44940 WSWG44980 WSWG44981 WSWG4600 WSWG46000 WSWG49154 WSWG49309 WSWG5200S WSWG59305 WSWG60120 WSWG60200 WSWG6102S WSWG65426 WSWG66150 WSWG93300 WSWG93400 WSWG93610 WSWG93690 WSWG93776 WSWGC13 WSWGC13S WSWGC9 WSWGC9S WSWGDC15 WSWGDC53

Page 119 118 119 119 118 119 119 119 118 118 118 118 119 117 206 315 206 206 206 315 206 206 206 206 292 292 292 292 292 292 292 389 392 392 392 392 392 392 392 391 391 392 391 270 270 270 279 271 278 278 270 270 269 268 268 268 269 269 270 272 273 273 270 273 276 276 276 272 277 278 270 270 270 279 279 270 278 280 280 280 280 271 276 388 388 388 388 150 140

Item No. WSWGF10A45M WSWGF10A90M WSWGF10SM WSWGF14NCSS WSWGF14NFA45 WSWGF14NFA45S WSWGF14NFA90 WSWGF14NFA90S WSWGF14NFS WSWGF14NFSS WSWGF14NPTA65 WSWGF14NPTS WSWGF18NPTA45 WSWGF18NPTA45S WSWGF18NPTA65 WSWGF18NPTA90 WSWGF18NPTA90S WSWGF18NPTS WSWGF18NPTSS WSWGF6A45M WSWGF6A90M WSWGF6SM WSWGF8A45M WSWGF8A90M WSWGF8SM WSWGFCPB WSWGFCPR WSWGFCPY WSWGFD14S WSWGFD14SS WSWGFD316S WSWGFD316SS WSWGFD516S WSWGFK100C WSWGFK100CM WSWGFK101 WSWGFK101M WSWGFK40SS WSWGFK60 WSWGFK60M WSWGFT4 WSWGFT4NPT WSWGFU1 WSWGG14AC WSWGG14AHP WSWGG14AW WSWGG14HD WSWGG14HV WSWGG14L WSWGG14LE WSWGG14LP WSWGG14PW WSWGG2 WSWGG3M WSWGG7K WSWGGC1 WSWGGC3J WSWGGC3JS WSWGGH12 WSWGGH12HP WSWGGH18 WSWGGH18HP WSWGGM1 WSWGLM1CL WSWGLM1CM WSWGLM1CXL WSWGLM2KL WSWGLM2KM WSWGLM2KS WSWGLM2KXL WSWGLM3L WSWGLM3M WSWGLM3S WSWGLM3XL WSWGLM4VL WSWGLM4VM WSWGLM4VS WSWGLM4VXL WSWGLM5DL WSWGLM5DM WSWGLM5DS WSWGLM5DXL WSWGN1 WSWGN2 WSWGP100 WSWGP150 WSWGP200 WSWGP75 WSWGPC100

Page 386 386 386 386 386 386 386 386 386 386 386 386 386 386 386 386 386 386 386 386 386 386 386 386 386 385 385 385 386 386 386 386 386 385 385 384 384 385 384 384 384 384 383 382 382 382 380 381 380 380 380 381 382 381 383 383 383 383 384 384 384 384 384 331 331 331 331 331 331 331 331 331 331 331 331 331 331 331 330 330 330 330 383 383 266 266 266 266 266

Item No. WSWGPHK1 WSWGPSK5 WSWGPT100 WSWGPT150 WSWGPT200 WSWGS18 WSWGT17 WSWGT18 WSWGT22 WSWGT25 WSWGT26 WSWGT6B WSWGTF12 WSWHB2 WSWHBB12 WSWHBG12 WSWHBK3 WSWHBP12 WSWHBS12-10 WSWHBS12-10L WSWHBS12-12 WSWHBS12-12L WSWHBS12-14 WSWHBS12-16 WSWHBS12-16L WSWHBS12-18 WSWHBS12-18L WSWHBS12-20 WSWHBS12-20L WSWHBS12-6 WSWHBS12-6L WSWHBS12-7 WSWHBS12-7L WSWHBS12-8 WSWHBS12-8L WSWHBS12-9 WSWHBS12-9L WSWHBS38-10 WSWHBS38-10L WSWHBS38-12 WSWHBS38-12L WSWHBS38-4 WSWHBS38-4L WSWHBS38-5 WSWHBS38-5L WSWHBS38-6 WSWHBS38-6L WSWHBS38-7 WSWHBS38-7L WSWHBS38-8 WSWHBS38-8L WSWHC1 WSWHC101S WSWHC102 WSWHC103 WSWHC1218 WSWHC1224 WSWHC1232 WSWHC12NS WSWHCG12 WSWHCG12A WSWHCG14 WSWHCG14A WSWHCG38 WSWHCG38A WSWHCG516 WSWHCG516A WSWHD1 WSWHD2 WSWHD3 WSWHK116 WSWHK12 WSWHK12NS WSWHK14 WSWHK14NS WSWHK18 WSWHK316 WSWHK316NS WSWHK332 WSWHK34 WSWHK34NS WSWHK38 WSWHK38NS WSWHK516 WSWHK516NS WSWHK532 WSWHK532NS WSWHK564 WSWHK58

Page 266 394 266 266 266 378 239 378 239 239 239 239 240 321 398 398 320 398 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 60 60 60 60 60 60 60 60 60 60 60 60 60 60 195 257 257 257 224 224 224 317 265 265 265 265 265 265 265 265 188 188 188 153 153 315 153 315 153 153 315 153 153 315 153 315 153 315 153 315 153 153

Item No.

Page

WSWHK58NS WSWHK716 WSWHK716NS WSWHK732 WSWHK732NS WSWHK764 WSWHK916 WSWHK916NS WSWHK964 WSWHKB14 WSWHKB18 WSWHKB316 WSWHKB38 WSWHKB516 WSWHKB532 WSWHKB732 WSWHKBC7 WSWHKC10 WSWHKF7 WSWHKF7M WSWHKF8PPM WSWHKF9 WSWHKF9M WSWHKF9PP WSWHKL1 WSWHKL116 WSWHKL12 WSWHKL14 WSWHKL18 WSWHKL316 WSWHKL332 WSWHKL34 WSWHKL38 WSWHKL516 WSWHKL532 WSWHKL564 WSWHKL58 WSWHKL716 WSWHKL732 WSWHKL764 WSWHKL916 WSWHKL964 WSWHKLC10 WSWHKP25 WSWHKS17 WSWHKS3PP WSWHKTL8PP WSWHKTL8PP10 WSWHKTL8PP12 WSWHKTL8PP25 WSWHKTL8PP3 WSWHKTL8PP4 WSWHKTL8PP5 WSWHKTL8PP6 WSWHKTL8PP8 WSWHL1 WSWHL1-12 WSWHL1-14 WSWHL1-316 WSWHL1-34 WSWHL1-38 WSWHL1-58 WSWHL1-78 WSWHL116 WSWHL118 WSWHL1316 WSWHL2 WSWHL2-12 WSWHL2-14 WSWHL2-18 WSWHL2-34 WSWHL2-38 WSWHL2-58 WSWHL2-78 WSWHL3 WSWHL3-12 WSWHL3-14 WSWHL3-18 WSWHL3-34 WSWHL3-58 WSWHL34 WSWHL4 WSWHL4-12 WSWHL4-14 WSWHL4-18 WSWHL4-34 WSWHL5 WSWHL5-12 WSWHL58

315 153 315 153 315 153 153 315 153 155 155 155 155 155 155 155 155 152 158 158 157 158 158 157 153 153 153 153 153 153 153 153 153 153 153 153 153 153 153 153 153 153 152 152 158 157 156 156 156 156 156 156 156 156 156 227 227 227 227 227 227 227 227 227 227 227 227 227 227 227 227 227 227 227 227 227 227 227 227 227 227 227 227 227 227 227 227 227 227

Item No. WSWHL6 WSWHL78 WSWHLA9001 WSWHLA9002 WSWHLA9005 WSWHLA9007 WSWHLA9009 WSWHLA9080 WSWHLA9083 WSWHLA9084 WSWHLA9091 WSWHLA9092 WSWHLK10 WSWHLK12 WSWHLK14 WSWHLK17 WSWHLK8 WSWHLK8L WSWHLK8P WSWHM2NS WSWHPC4 WSWHR121014T WSWHR123T WSWHR12610T WSWHR126T WSWHR414 WSWHR418 WSWHR424 WSWHR610 WSWHR614 WSWHR624 WSWHR63T WSWHR66 WSWHR6610T WSWHR66T WSWHR910T WSWHR96T WSWHRK10 WSWHRK4 WSWHS1 WSWHS1036 WSWHS10NS WSWHS1236 WSWHS12E WSWHS12M WSWHS12P WSWHS14NS WSWHS1NS WSWHS416 WSWHS636 WSWHS6E WSWHS6NS WSWHS836 WSWHSC3NS WSWHSE1430 WSWHSE2512 WSWHSE412 WSWHSE630 WSWHSE824 WSWHSE830 WSWHSF16 WSWHSF16PT WSWHSF16RT WSWHSF24 WSWHSF24PT WSWHSF24RT WSWHSK1210 WSWHSK1210L WSWHSK3808 WSWHSK388L WSWHT300 WSWHT65P WSWHT65PL WSWHT800 WSWHTA500A WSWHTA500AHD WSWHTC500S WSWHTC750ALP WSWHTC750AP WSWHTC750P WSWHTF200L WSWHTF8 WSWHTF8PP WSWHW28 WSWHW93776-1 WSWHW93776-2 WSWHW93776-3 WSWHW93776-4 WSWHW93776-5

Page 227 227 228 228 228 228 228 228 228 228 228 228 225 226 226 225 225 226 226 321 263 224 224 224 224 224 224 224 224 224 224 224 224 224 224 224 224 266 266 223 188 321 188 223 223 223 321 317 188 188 224 321 188 318 189 189 189 189 189 189 190 190 190 190 190 190 66 66 54 54 282 282 282 282 283 283 282 283 283 282 283 158 157 190 276 276 276 276 276

www.westwardtools.ca

W405-10 - W413-10_reverseindex.qxp

2/9/10

11:15 AM

Page 409

REVERSE INDEX Item No. WSWHW93776-6 WSWHXD1-14NC WSWHXD1-14NF WSWHXD1-18NC WSWHXD1-18NF WSWHXD1-38NC WSWHXD1-38NF WSWHXD12NC WSWHXD12NF WSWHXD14NC WSWHXD14NF WSWHXD1NC WSWHXD1NF12 WSWHXD1NF14 WSWHXD34NC WSWHXD34NF WSWHXD38NC WSWHXD38NF WSWHXD516NC WSWHXD516NF WSWHXD58NC WSWHXD58NF WSWHXD716NC WSWHXD716NF WSWHXD78NC WSWHXD78NF WSWHXD916NC WSWHXD916NF WSWHXK43 WSWIMA201 WSWIMA317 WSWJ10T WSWJ12 WSWJ15T WSWJ2 WSWJ20 WSWJ30 WSWJ4 WSWJ4T WSWJ6 WSWJ8 WSWJA12 WSWJA15 WSWJA30 WSWJA50 WSWJBA2035 WSWJL12 WSWJL20 WSWJS3 WSWJS6 WSWJSH075 WSWJSH2 WSWJSK3 WSWJSP10H WSWJSP10M WSWJSP12 WSWJSP20 WSWJSP3 WSWJSP6 WSWJSP7F WSWJT1000 WSWJTA1000 WSWJW214 WSWJW218 WSWJW300C WSWJW300S WSWKL10NS WSWKL2W WSWKL3W WSWKL4W WSWKP1F WSWKP1LF WSWKP2PC WSWKP3HS WSWKU18A WSWKU9A WSWL300 WSWL300B WSWL500 WSWL500B WSWL650 WSWL750 WSWL750B WSWLA400 WSWLB14-516 WSWLB14-516R WSWLB38-12R WSWLB516-38 WSWLB516-38R

Page 276 222 222 222 222 222 222 222 222 222 222 222 222 222 222 222 222 222 222 222 222 222 222 222 222 222 222 222 214 169 169 267 267 267 267 267 267 267 267 267 267 267 268 267 267 271 267 267 274 274 274 275 269 274 274 274 274 274 274 272 273 273 376 376 376 376 318 184 184 184 333 333 333 333 183 183 183 183 183 183 183 183 183 43 265 265 265 265 265

Item No. WSWLLD02 WSWLP40S WSWLP50S WSWLT330 WSWLT660 WSWLV1L WSWLV24AHD WSWLV48AHD WSWLV75TM WSWLV9TE WSWLWC10 WSWLWC11 WSWLWC11F WSWLWC18F WSWLWC19 WSWLWC24 WSWLWC24F WSWLWC6F WSWLWC7 WSWLWH10 WSWLWH7 WSWLWK7 WSWLWM10 WSWLWN6 WSWLWN9 WSWLWP7 WSWLWR10 WSWLWR5 WSWLWR7 WSWLWS10 WSWLWS8 WSWLWW11 WSWLWW9 WSWM3022 WSWME300 WSWME300AL WSWMHBS12-10L WSWMHBS12-12 WSWMHBS12-12L WSWMHBS12-14 WSWMHBS12-14L WSWMHBS12-16 WSWMHBS12-17L WSWMHBS12-5L WSWMHBS12-6L WSWMHBS12-7L WSWMHBS12-8L WSWMHBS12-9L WSWMHBS38-10 WSWMHBS38-10L WSWMHBS38-12L WSWMHBS38-3 WSWMHBS38-3L WSWMHBS38-4 WSWMHBS38-4L WSWMHBS38-5 WSWMHBS38-5L WSWMHBS38-6 WSWMHBS38-6L WSWMHBS38-7 WSWMHBS38-7L WSWMHBS38-8 WSWMHBS38-8L WSWMHBS38-9L WSWMHK015 WSWMHK10 WSWMHK10NS WSWMHK12 WSWMHK12NS WSWMHK14 WSWMHK14NS WSWMHK15 WSWMHK17 WSWMHK17NS WSWMHK19 WSWMHK19NS WSWMHK2 WSWMHK25 WSWMHK3 WSWMHK4 WSWMHK45 WSWMHK4NS WSWMHK5 WSWMHK55 WSWMHK55NS WSWMHK5NS WSWMHK6 WSWMHK6NS WSWMHK7

www.westwardtools.ca

Page 243 324 324 290 290 244 244 244 244 244 173 174 174 174 174 174 174 174 173 175 175 176 176 174 174 175 173 173 173 175 175 175 175 17 43 43 73 73 73 73 73 73 73 73 73 73 73 73 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 154 154 315 154 315 154 315 154 154 315 154 315 154 154 154 154 154 315 154 154 315 315 154 315 154

Item No. WSWMHK7NS WSWMHK8 WSWMHK8NS WSWMHK9 WSWMHK9NS WSWMHKB10 WSWMHKB25 WSWMHKB3 WSWMHKB4 WSWMHKB5 WSWMHKB6 WSWMHKB8 WSWMHKBC7 WSWMHKC10 WSWMHKL015 WSWMHKL10 WSWMHKL12 WSWMHKL14 WSWMHKL15 WSWMHKL17 WSWMHKL19 WSWMHKL2 WSWMHKL25 WSWMHKL3 WSWMHKL4 WSWMHKL5 WSWMHKL6 WSWMHKL8 WSWMHKLC10 WSWMHKTL8PP WSWMHKTL8PP10 WSWMHKTL8PP2 WSWMHKTL8PP25 WSWMHKTL8PP3 WSWMHKTL8PP4 WSWMHKTL8PP5 WSWMHKTL8PP6 WSWMHKTL8PP8 WSWMHSK1210L WSWMHSK3808 WSWMHSK3810L WSWMKC69 WSWML230 WSWMS1035 WSWMS1036 WSWMS1038 WSWMS1041 WSWMS1046 WSWMS1050 WSWMS1054 WSWMS1055 WSWMS1058 WSWMS1060 WSWMS1063 WSWMS1065 WSWMS1067 WSWMS1070 WSWMS1071 WSWMS1075 WSWMS1077 WSWMS1080 WSWMS1206 WSWMS1207 WSWMS1207NS WSWMS1208 WSWMS1208NS WSWMS1209 WSWMS1209NS WSWMS1210 WSWMS1210NS WSWMS1211 WSWMS1211NS WSWMS1212 WSWMS1212NS WSWMS1213 WSWMS1213NS WSWMS1214 WSWMS1214NS WSWMS1215 WSWMS1215NS WSWMS1216 WSWMS1216NS WSWMS1217 WSWMS1217NS WSWMS1218 WSWMS1218NS WSWMS1219 WSWMS1219NS WSWMS1220

Page 315 154 315 154 315 155 155 155 155 155 155 155 155 152 154 154 154 154 154 154 154 154 154 154 154 154 154 154 152 156 156 156 156 156 156 156 156 156 66 55 55 16 248 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 70 70 313 70 313 70 313 70 313 70 313 70 313 70 313 70 313 70 313 70 313 70 313 70 313 70 313 70

Item No. WSWMS1220NS WSWMS1221 WSWMS1221NS WSWMS1222 WSWMS1222NS WSWMS1223 WSWMS1223NS WSWMS1224 WSWMS1224NS WSWMS1225 WSWMS1226 WSWMS1226NS WSWMS1227 WSWMS1227NS WSWMS1228 WSWMS1228NS WSWMS1229 WSWMS1230 WSWMS1230NS WSWMS1232 WSWMS1232NS WSWMS12606 WSWMS12607 WSWMS12608 WSWMS12609 WSWMS12610 WSWMS12611 WSWMS12612 WSWMS12613 WSWMS12614 WSWMS12615 WSWMS12616 WSWMS12617 WSWMS12618 WSWMS12619 WSWMS12620 WSWMS12621 WSWMS12622 WSWMS12623 WSWMS12624 WSWMS12625 WSWMS12626 WSWMS12627 WSWMS12628 WSWMS12629 WSWMS12630 WSWMS12632 WSWMS1404 WSWMS1405 WSWMS1406 WSWMS1407 WSWMS1408 WSWMS1409 WSWMS1410 WSWMS1411 WSWMS1412 WSWMS1413 WSWMS1445 WSWMS1455 WSWMS3422 WSWMS3423 WSWMS3424 WSWMS3425 WSWMS3426 WSWMS3427 WSWMS3429 WSWMS3430 WSWMS3432 WSWMS3434 WSWMS3435 WSWMS3436 WSWMS3438 WSWMS3441 WSWMS3446 WSWMS3450 WSWMS38209 WSWMS38210 WSWMS38211 WSWMS38212 WSWMS38213 WSWMS38214 WSWMS38215 WSWMS38216 WSWMS38217 WSWMS38218 WSWMS38219 WSWMS38606 WSWMS38607 WSWMS38608

Page 313 70 313 70 313 70 313 70 313 70 70 313 70 313 70 313 70 70 313 70 313 69 69 69 69 69 69 69 69 69 69 69 69 69 69 69 69 69 69 69 69 69 69 69 69 69 69 49 49 49 49 49 49 49 49 49 49 49 49 77 77 77 77 77 77 77 77 77 77 77 77 77 77 77 77 59 59 59 59 59 59 59 59 59 59 59 58 58 58

Item No. WSWMS38608S1 WSWMS38609 WSWMS38609S1 WSWMS38610 WSWMS38610S1 WSWMS38611 WSWMS38611S1 WSWMS38612 WSWMS38612S1 WSWMS38613 WSWMS38613S1 WSWMS38614 WSWMS38614S1 WSWMS38615 WSWMS38615S1 WSWMS38616 WSWMS38616S1 WSWMS38617 WSWMS38617S1 WSWMS38618 WSWMS38618S1 WSWMS38619 WSWMS38619S1 WSWMS38620 WSWMS38621 WSWMS38622 WSWMS38623 WSWMS38624 WSWMSK1214 WSWMSK12616 WSWMSK12619 WSWMSK1409 WSWMSK3417 WSWMSK3814 WSWMSK3815S1 WSWMSK3817 WSWMSK3827 WSWMSKU38611 WSWMSP3821 WSWMSU38610 WSWMSU38611 WSWMSU38612 WSWMSU38613 WSWMSU38614 WSWMSU38615 WSWMSU38616 WSWMSU38617 WSWMSU38618 WSWMSU38619 WSWMT1 WSWMT100 WSWMT100F WSWMT10E WSWMT12 WSWMT16 WSWMT16C WSWMT16E WSWMT16SS WSWMT2 WSWMT25 WSWMT25C WSWMT25E WSWMT25SS WSWMTR100 WSWMTR100F WSWMTR300 WSWMTW12 WSWMTW12M WSWMTW4 WSWMTW4M WSWN800L WSWN800S WSWNBC1050 WSWNBC1050HT WSWNBC300 WSWNBC350 WSWNBC450 WSWNBC600 WSWNBC600HT WSWNBC750 WSWNBC750HT WSWNBC900 WSWNBC900HT WSWND08E WSWND10E WSWND12E WSWND14E WSWND16E WSWNDK5E

Page 22 58 22 58 22 58 22 58 22 58 22 58 22 58 22 58 22 58 22 58 22 58 22 58 58 58 58 58 64 64 64 46 74 53 21 52 52 53 62 60 60 60 60 60 60 60 60 60 60 247 241 242 240 240 240 241 240 241 247 240 241 240 241 242 242 242 243 243 243 243 262 262 179 179 179 179 179 179 179 179 179 179 179 151 151 151 151 151 151

Item No. WSWNDM10 WSWNDM11 WSWNDM12 WSWNDM13 WSWNDM6 WSWNDM7 WSWNDM8 WSWNDM9 WSWNDMK8 WSWNSD1132 WSWNSD12 WSWNSD14 WSWNSD316 WSWNSD38 WSWNSD516 WSWNSD7 WSWNSD716 WSWOE100 WSWOE101 WSWOE102 WSWOE103 WSWOE104 WSWOE106 WSWOE108 WSWOEK06R WSWOK3110 WSWOK3110T WSWOK401 WSWOK402 WSWOK403 WSWOK404 WSWOK405 WSWORK382 WSWORK419M WSWP2HP WSWPA12 WSWPB1 WSWPB106H WSWPB10E WSWPB12 WSWPB1412H WSWPB18 WSWPB1816H WSWPB2 WSWPB2220H WSWPB24 WSWPB3 WSWPB8 WSWPBI12 WSWPBI18 WSWPBI24 WSWPBI8 WSWPBIK4 WSWPBK4 WSWPBK4H WSWPBX10 WSWPBX16 WSWPBX24 WSWPBX29E WSWPBX33 WSWPBX8 WSWPBXK2S WSWPC20PP WSWPC20S WSWPC35P WSWPC40S WSWPC9HC WSWPD4M WSWPD6E WSWPD6H WSWPD6NS WSWPD6TT WSWPD7H WSWPD7NS WSWPD8E WSWPD8HC WSWPDA8HC WSWPE4M WSWPE6H WSWPE8H WSWPF10H WSWPG10H WSWPG10NS WSWPG12H WSWPG12NS WSWPGK11 WSWPGM WSWPGS WSWPH1

Page 151 151 151 151 151 151 151 151 150 150 150 150 150 150 150 150 150 106 106 106 106 106 106 106 106 211 211 213 212 212 211 212 388 388 263 193 198 199 173 198 199 198 199 198 199 198 198 198 199 199 199 199 199 198 199 200 200 200 200 200 200 200 294 294 294 294 160 166 172, 307 162 310 323 162 310 172, 307 160 160 166 164 164 164 162 311 162 311 195 215, 237 215, 237 377

409

W405-10 - W413-10_reverseindex.qxp

2/9/10

11:15 AM

Page 410

REVERSE INDEX Item No.

Page

WSWPH13DX10 165 WSWPH13DX16 165 WSWPH13DX24 165 WSWPK112F 184 WSWPK112S 184 WSWPK114F 184 WSWPK114NS 318 WSWPK114S 184 WSWPK2F 184 WSWPK2NS 318 WSWPK2S 184 WSWPK3DX 165 WSWPK3DXH 165 WSWPK3F 184 WSWPK3NS 318 WSWPK3S 184 WSWPK4F 184 WSWPK4NS 318 WSWPK5 161 WSWPK5E 171, 306 WSWPK5F 184 WSWPK5M 165 WSWPKSK10E 308 WSWPKSK7E 308 WSWPL5M 166 WSWPL6NS 310 WSWPL7H 164 WSWPL8E 172, 306 WSWPL8H 164 WSWPL8HC 160 WSWPL8NS 310 WSWPL9HC 160 WSWPLH7E 172, 306 WSWPLT10A 290 WSWPLT13 290 WSWPLT30S 290 WSWPM1027 97 WSWPM1029 97 WSWPM1030 97 WSWPM1032 97 WSWPM1033 97 WSWPM1035 97 WSWPM1036 97 WSWPM1038 97 WSWPM1041 97 WSWPM1046 97 WSWPM1050 97 WSWPM1054 97 WSWPM1055 97 WSWPM1058 97 WSWPM1060 97 WSWPM1063 97 WSWPM1065 97 WSWPM1067 97 WSWPM1070 97 WSWPM1080 97 WSWPM1209 89 WSWPM1210 89 WSWPM1211 89 WSWPM1212 89 WSWPM1213 89 WSWPM1214 89 WSWPM1215 89 WSWPM1216 89 WSWPM1217 89 WSWPM1218 89 WSWPM1219 89 WSWPM1220 89 WSWPM1221 89 WSWPM1222 89 WSWPM1223 89 WSWPM1224 89 WSWPM1226 89 WSWPM1228 89 WSWPM1230 89 WSWPM1236 89 WSWPM15100 98 WSWPM15105 98 WSWPM15115 98 WSWPM1555 98 WSWPM1560 98 WSWPM1565 98 WSWPM1570 98 WSWPM1575 98 WSWPM1580 98 WSWPM1585 98 WSWPM1590 98 WSWPM1595 98 WSWPM3417 94

410

Item No. WSWPM3418 WSWPM3419 WSWPM3420 WSWPM3421 WSWPM3422 WSWPM3423 WSWPM3424 WSWPM3426 WSWPM3427 WSWPM3429 WSWPM3430 WSWPM3432 WSWPM3433 WSWPM3435 WSWPM3436 WSWPM3438 WSWPM3441 WSWPM3446 WSWPM3450 WSWPM3454 WSWPM3458 WSWPM3460 WSWPM3808 WSWPM3809 WSWPM3810 WSWPM3811 WSWPM3812 WSWPM3813 WSWPM3814 WSWPM3815 WSWPM3816 WSWPM3817 WSWPM3818 WSWPM3819 WSWPMA1230 WSWPMA1236 WSWPMD1026 WSWPMD1027 WSWPMD1029 WSWPMD1030 WSWPMD1032 WSWPMD1033 WSWPMD1035 WSWPMD1036 WSWPMD1038 WSWPMD1041 WSWPMD1055 WSWPMD1060 WSWPMD1065 WSWPMD1070 WSWPMD1075 WSWPMD1080 WSWPMD1085 WSWPMD1090 WSWPMD1209 WSWPMD1210 WSWPMD1211 WSWPMD1212 WSWPMD1213 WSWPMD1214 WSWPMD1215 WSWPMD1216 WSWPMD1217 WSWPMD1218 WSWPMD1219 WSWPMD1220 WSWPMD1221 WSWPMD1222 WSWPMD1223 WSWPMD1224 WSWPMD1226 WSWPMD1227 WSWPMD1228 WSWPMD1230 WSWPMD1232 WSWPMD1236 WSWPMD3421 WSWPMD3422 WSWPMD3423 WSWPMD3424 WSWPMD3426 WSWPMD3427 WSWPMD3429 WSWPMD3430 WSWPMD3432 WSWPMD3433 WSWPMD3434 WSWPMD3435 WSWPMD3436

Page 94 94 94 94 94 94 94 94 94 94 94 94 94 94 94 94 94 94 94 94 94 94 84 84 84 84 84 84 84 84 84 84 84 84 90 90 97 97 97 97 97 97 97 97 97 97 97 97 97 97 97 97 97 97 89 89 89 89 89 89 89 89 89 89 89 89 89 89 89 89 89 89 89 89 89 89 94 94 94 94 94 94 94 94 94 94 94 94 94

Item No. WSWPMD3438 WSWPMD3441 WSWPMD3442 WSWPMD3443 WSWPMD3444 WSWPMD3446 WSWPMD3450 WSWPMD3455 WSWPMD3460 WSWPMD3810 WSWPMD3811 WSWPMD3812 WSWPMD3813 WSWPMD3814 WSWPMD3815 WSWPMD3816 WSWPMD3817 WSWPMD3818 WSWPMD3819 WSWPMDK1218 WSWPMDK3410 WSWPMDK3811 WSWPMK1218 WSWPMK3813 WSWPMKU1212 WSWPMKU3812 WSWPMU1213 WSWPMU1214 WSWPMU1215 WSWPMU1216 WSWPMU1217 WSWPMU1218 WSWPMU1219 WSWPMU1220 WSWPMU1221 WSWPMU1222 WSWPMU1223 WSWPMU3809 WSWPMU3810 WSWPMU3811 WSWPMU3812 WSWPMU3813 WSWPMU3814 WSWPMU3815 WSWPMU3816 WSWPMU3817 WSWPMU3818 WSWPMU3819 WSWPN11DXD WSWPN13DX WSWPN13DXA WSWPN6E WSWPN6H WSWPN7NS WSWPN7TT WSWPN8E WSWPN8H WSWPN8HC WSWPNB5M WSWPNB6E WSWPNB6H WSWPNB8E WSWPNB8H WSWPNH8E WSWPNN5M WSWPR10 WSWPR3 WSWPR4 WSWPR5 WSWPR6 WSWPR8 WSWPRFS34 WSWPS126A WSWPS126B WSWPS126C WSWPS126D WSWPS126F WSWPS126H WSWPS126I WSWPS126K WSWPS126L WSWPS126M WSWPS126N WSWPS126O WSWPS126P WSWPS126Q WSWPS126R WSWPS126S WSWPS126T

Page 94 94 94 94 94 94 94 94 94 84 84 84 84 84 84 84 84 84 84 86 91 82 86 82 87 83 90 90 90 90 90 90 90 90 90 90 90 85 85 85 85 85 85 85 85 85 85 85 165 165 165 171, 306 163 310 323 171, 306 163 160 167 172, 307 163 172, 307 163 172, 306 166 194 194 194 194 194 194 389 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88

Item No. WSWPS126U WSWPS126V WSWPS12L WSWPS12M WSWPS12N WSWPS12O WSWPS12P WSWPS12Q WSWPS12R WSWPS12S WSWPS12T WSWPS12U WSWPS12V WSWPS12X WSWPS12Y WSWPS12Z WSWPS12ZA WSWPS12ZB WSWPS12ZC WSWPS12ZD WSWPS12ZF WSWPS12ZG WSWPS12ZH WSWPS12ZI WSWPS12ZK WSWPS12ZL WSWPS12ZM WSWPS12ZN WSWPS12ZO WSWPS12ZP WSWPS12ZQ WSWPS12ZR WSWPS12ZS WSWPS12ZT WSWPS12ZU WSWPS12ZV WSWPS346H WSWPS346I WSWPS346K WSWPS346L WSWPS346M WSWPS346N WSWPS346O WSWPS346P WSWPS346Q WSWPS346R WSWPS346S WSWPS346T WSWPS346U WSWPS346V WSWPS346W WSWPS346X WSWPS346Y WSWPS346Z WSWPS346ZA WSWPS346ZB WSWPS346ZC WSWPS346ZD WSWPS346ZF WSWPS346ZG WSWPS346ZH WSWPS346ZI WSWPS346ZK WSWPS346ZL WSWPS346ZM WSWPS3864 WSWPS386A WSWPS386B WSWPS386C WSWPS386D WSWPS386F WSWPS386H WSWPS386I WSWPS6H WSWPS8H WSWPS8NS WSWPS8TT WSWPSA1005 WSWPSA1006 WSWPSA1008 WSWPSA1015 WSWPSA102 WSWPSA1034 WSWPSA107 WSWPSA1202 WSWPSA1203 WSWPSA1205 WSWPSA1210 WSWPSA1234

Page 88 88 96 96 96 96 96 96 96 96 96 96 96 96 96 96 96 96 96 96 96 96 96 96 96 96 96 96 96 96 96 96 96 96 96 96 92 92 92 92 92 92 92 92 92 92 92 92 92 92 92 92 92 92 92 92 92 92 92 92 92 92 92 92 92 83 83 83 83 83 83 83 83 161 161 310 323 96 96 96 95 95 95 96 87 87 87 87 87

Item No.

Page

WSWPSA1238 WSWPSA3402 WSWPSA3405 WSWPSA3406 WSWPSA3407 WSWPSA3408 WSWPSA3410 WSWPSA3412 WSWPSA3802 WSWPSA3803 WSWPSA3806 WSWPSA3812 WSWPSD126A WSWPSD126B WSWPSD126C WSWPSD126D WSWPSD126F WSWPSD126H WSWPSD126I WSWPSD126K WSWPSD126L WSWPSD126M WSWPSD126N WSWPSD126O WSWPSD126P WSWPSD126Q WSWPSD126R WSWPSD126S WSWPSD126T WSWPSD126U WSWPSD126V WSWPSD12M WSWPSD12N WSWPSD12O WSWPSD12P WSWPSD12Q WSWPSD12R WSWPSD12S WSWPSD12T WSWPSD12U WSWPSD12V WSWPSD12X WSWPSD12Y WSWPSD12Z WSWPSD12ZA WSWPSD12ZB WSWPSD12ZC WSWPSD12ZF WSWPSD12ZH WSWPSD12ZK WSWPSD12ZM WSWPSD12ZN WSWPSD12ZO WSWPSD12ZP WSWPSD12ZPA WSWPSD12ZQ WSWPSD12ZQA WSWPSD12ZR WSWPSD12ZS WSWPSD12ZT WSWPSD12ZU WSWPSD346I WSWPSD346K WSWPSD346L WSWPSD346M WSWPSD346N WSWPSD346O WSWPSD346P WSWPSD346Q WSWPSD346R WSWPSD346S WSWPSD346T WSWPSD346U WSWPSD346V WSWPSD346X WSWPSD346Y WSWPSD346Z WSWPSD346ZA WSWPSD346ZB WSWPSD346ZC WSWPSD346ZD WSWPSD346ZF WSWPSD346ZG WSWPSD346ZH WSWPSD346ZI WSWPSD346ZK WSWPSD346ZL WSWPSD346ZM WSWPSD3864

87 93 92 92 92 92 93 93 83 83 83 83 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 98 98 98 98 98 98 98 98 98 98 98 98 98 98 98 98 98 98 98 98 98 98 98 98 98 98 98 98 98 98 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 84

Item No. WSWPSD386A WSWPSD386B WSWPSD386C WSWPSD386D WSWPSD386F WSWPSD386H WSWPSD386I WSWPSDK1212 WSWPSDK1217 WSWPSDK3409 WSWPSDK3810 WSWPSF1721M WSWPSF2426 WSWPSFK2 WSWPSFK2M WSWPSK107 WSWPSK1217 WSWPSK128 WSWPSK136 WSWPSK3409 WSWPSK3417 WSWPSK3810 WSWPSKU128 WSWPSKU388 WSWPSU12C WSWPSU12D WSWPSU12F WSWPSU12H WSWPSU12I WSWPSU12K WSWPSU12L WSWPSU38A WSWPSU38B WSWPSU38C WSWPSU38D WSWPSU38F WSWPSU38H WSWPSU38I WSWPT1 WSWPT1-12 WSWPT1-14 WSWPT12 WSWPT14 WSWPT1531M WSWPT18 WSWPT2 WSWPT2745HL WSWPT2748-5T WSWPT2748B WSWPT2748BR WSWPT2748E WSWPT2748G WSWPT2748LP WSWPT2748SS WSWPT2845SC WSWPT300 WSWPT34 WSWPT38 WSWPTA11 WSWPTA40 WSWPTA57 WSWPTM24 WSWPTS1 WSWPW10R WSWPW14NS WSWPW14R WSWPW18NS WSWPW18R WSWPW24NS WSWPW6E WSWPWAT14 WSWPWAT18 WSWPWAT24 WSWPWAT36 WSWPWT10 WSWPWT10HJ WSWPWT10HJP WSWPWT10K WSWPWT10S WSWPWT12 WSWPWT12HJ WSWPWT12HJP WSWPWT12K WSWPWT12S WSWPWT14 WSWPWT14HJ WSWPWT14HJP WSWPWT14K WSWPWT14S

Page 84 84 84 84 84 84 84 86 86 91 82 90 90 90 90 95 85 95 95 91 91 82 87 83 90 90 90 90 90 90 90 85 85 85 85 85 85 85 215 215 215 215 215 289 215 215 288 287 289 287 286 288 289 288 287 145 215 215 144 144 144 247 289 122 311 122 311 122 311 173, 307 123 123 123 123 123 123 124 124 124 123 123 124 124 124 123 123 124 124 124

www.westwardtools.ca

W405-10 - W413-10_reverseindex.qxp

2/9/10

11:15 AM

Page 411

REVERSE INDEX Item No. WSWPWT18 WSWPWT18HJ WSWPWT18HJP WSWPWT18K WSWPWT18S WSWPWT24 WSWPWT24HJ WSWPWT24HJP WSWPWT24K WSWPWT24S WSWPWT36 WSWPWT36HJ WSWPWT36HJP WSWPWT36K WSWPWT36S WSWPWT8 WSWPWT8HJ WSWPWT8HJP WSWPWT8K WSWPWT8S WSWRB1 WSWRB1012MH WSWRB1113MH WSWRB1214H WSWRB1416MH WSWRB1517MH WSWRB1822H WSWRB1922MH WSWRB2 WSWRB2022H WSWRB2428H WSWRB3 WSWRBF1112M WSWRBF1214 WSWRBF1314M WSWRBF1517M WSWRBF1618 WSWRBF1618M WSWRBF2022 WSWRBF2428 WSWRBF78M WSWRBF810 WSWRBF910M WSWRBFK5 WSWRBFK6M WSWRBS1011M WSWRBS1012 WSWRBS1012XLS WSWRBS1016Q WSWRBS1213M WSWRBS1214XLMS WSWRBS1315XLMS WSWRBS1415M WSWRBS1416 WSWRBS1416XLS WSWRBS1618M WSWRBS1618XLMS WSWRBS1619QM WSWRBS1719M WSWRBS1719XLMS WSWRBS1820 WSWRBS1820XLS WSWRBS1824Q WSWRBS2224 WSWRBS2224XLS WSWRBS810XLMS WSWRBS813QM WSWRBS89M WSWRBSK4 WSWRBSK4XLS WSWRBSK5XLMS WSWRBSK6M WSWRBSK8Q WSWRBSK8QM WSWRC10 WSWRC10F WSWRC10FM WSWRC10M WSWRC10R WSWRC10RM WSWRC10SM WSWRC11FM WSWRC11M WSWRC11RM WSWRC12 WSWRC12F WSWRC12FM WSWRC12M WSWRC12R

Page 123 123 124 124 124 123 123 124 124 124 123 123 124 124 124 123 123 124 124 124 184 115 115 115 115 115 115 115 184 115 115 184 117 117 117 117 117 117 117 117 117 117 117 116 117 113 112 113 116 113 113 113 113 112 113 113 113 116 113 113 112 113 116 112 113 113 116 113 112 113 113 112 116 116 111 114 114 110 108 108 112 114 110 108 111 114 114 110 108

Item No. WSWRC12RM WSWRC12S WSWRC12SM WSWRC13FM WSWRC13M WSWRC13RM WSWRC13SM WSWRC14 WSWRC14F WSWRC14FM WSWRC14M WSWRC14R WSWRC14RM WSWRC14S WSWRC14SM WSWRC15FM WSWRC15M WSWRC15RM WSWRC15SM WSWRC16 WSWRC16F WSWRC16FM WSWRC16M WSWRC16R WSWRC16RM WSWRC16S WSWRC17FM WSWRC17M WSWRC17RM WSWRC17SM WSWRC18 WSWRC18F WSWRC18FM WSWRC18M WSWRC18R WSWRC18RM WSWRC18S WSWRC19FM WSWRC19M WSWRC19RM WSWRC19SM WSWRC20 WSWRC20F WSWRC20R WSWRC20S WSWRC21M WSWRC22 WSWRC22F WSWRC22M WSWRC22R WSWRC22S WSWRC24 WSWRC24F WSWRC24M WSWRC24R WSWRC24S WSWRC25M WSWRC26 WSWRC27M WSWRC28 WSWRC30 WSWRC30M WSWRC32 WSWRC32M WSWRC34 WSWRC34M WSWRC36 WSWRC36M WSWRC40 WSWRC41M WSWRC42 WSWRC44 WSWRC46 WSWRC46M WSWRC48 WSWRC50 WSWRC50M WSWRC52 WSWRC54 WSWRC56 WSWRC58 WSWRC60 WSWRC64 WSWRC8M WSWRCK10FM WSWRCK10RM WSWRCK4H WSWRCK4L WSWRCK5M

www.westwardtools.ca

Page 108 111 112 114 110 108 112 111 114 114 110 108 108 111 112 114 110 108 112 111 114 114 110 108 108 111 114 110 108 112 111 114 114 110 108 108 111 114 110 108 112 111 114 108 111 110 111 114 110 108 111 111 114 110 108 111 110 111 110 111 111 110 111 110 111 110 111 110 111 110 111 111 111 110 111 111 110 111 111 111 111 111 111 110 114 108 115 109 109

Item No. WSWRCK5MH WSWRCK7R WSWRCK7RM WSWRCK8 WSWRCK8F WSWRCK8R WSWRCK8S WSWRCK8SM WSWRCK9M WSWRD1-1024 WSWRD1-1032 WSWRD1-12-12NC WSWRD1-12-12NF WSWRD1-12-14NC WSWRD1-12-14NF WSWRD1-12-34NC WSWRD1-12-34NF WSWRD1-12-38NC WSWRD1-12-38NF WSWRD1-12-516NC WSWRD1-12-516NF WSWRD1-12-58NC WSWRD1-12-58NF WSWRD1-12-716NC WSWRD1-12-716NF WSWRD1-12-916NC WSWRD1-12-916NF WSWRD1-1224 WSWRD1-1228 WSWRD1-12NC WSWRD1-12NF WSWRD1-14NC WSWRD1-14NF WSWRD1-38NC WSWRD1-38NF WSWRD1-516NC WSWRD1-516NF WSWRD1-632 WSWRD1-640 WSWRD1-716NC WSWRD1-716NF WSWRD1-832 WSWRD1-836 WSWRD2-12NC WSWRD2-12NF WSWRD2-14NC WSWRD2-14NF WSWRD2-34NC WSWRD2-34NF WSWRD2-38NC WSWRD2-38NF WSWRD2-516NC WSWRD2-516NF WSWRD2-58NC WSWRD2-58NF WSWRD2-716NC WSWRD2-716NF WSWRD2-78NC WSWRD2-78NF WSWRD2-916NC WSWRD2-916NF WSWRDP1-12-12 WSWRDP1-12-14 WSWRDP1-12-18 WSWRDP1-18 WSWRDP2-38 WSWRF128 WSWRF31 WSWRF40 WSWRF40S2F WSWRHA1250HSS WSWRHA1250L WSWRHA1250LHD WSWRHA1250LSS WSWRHA1465W WSWRHA3850HSS WSWRHA3850L WSWRHA3850LHD WSWRHA3850LSS WSWRHM12150L WSWRHM38100H WSWRHM38100L WSWRHM3850H WSWRK1 WSWRKB1 WSWRM16 WSWRM24 WSWRM32 WSWRRK1

Page 115 116 116 109 114 107 110 110 109 220 220 221 221 221 221 221 221 221 221 221 221 221 221 221 221 221 221 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 221 221 221 221 221 221 221 221 221 221 221 221 221 221 221 221 221 221 215 215 215 215 215 298 297 297 296 375 374 375 375 301 375 374 375 375 374 374 374 374 184 184 188 188 188 78

Item No. WSWRRK34 WSWS13-100 WSWS13-33 WSWS13-66 WSWS13B WSWS35-100 WSWS35-66 WSWS35B WSWS7-100 WSWS7-33 WSWS7-66 WSWS7B WSWSA100 WSWSA1002 WSWSA101 WSWSA1034 WSWSA105 WSWSA108 WSWSA116 WSWSA119 WSWSA119RK WSWSA1201 WSWSA1201L WSWSA1201LRK WSWSA1201NS WSWSA1201RKT WSWSA1202 WSWSA1203 WSWSA1203NS WSWSA1207 WSWSA1210 WSWSA1210NS WSWSA1218 WSWSA122 WSWSA1224 WSWSA1230 WSWSA1234 WSWSA1234NS WSWSA1238 WSWSA124NS WSWSA125 WSWSA128NS WSWSA12A WSWSA12AF WSWSA12AFRK WSWSA12AL WSWSA12ARK WSWSA12NS WSWSA12NSRK WSWSA1401 WSWSA1401RKT WSWSA1402 WSWSA1403 WSWSA142 WSWSA1438 WSWSA144 WSWSA146 WSWSA146F WSWSA14A WSWSA14ARK WSWSA3400 WSWSA3402 WSWSA3402NS WSWSA3404 WSWSA3405 WSWSA3406 WSWSA3410 WSWSA3410NS WSWSA3412 WSWSA3412NS WSWSA3415NS WSWSA3418 WSWSA3418NS WSWSA344NS WSWSA348NS WSWSA34NS WSWSA34NSRK WSWSA3801 WSWSA3801RKT WSWSA3802 WSWSA3803 WSWSA3807 WSWSA3810 WSWSA3812 WSWSA3814 WSWSA3818 WSWSA382 WSWSA3824 WSWSA382W

Page 75 263 263 263 263 263 263 263 263 263 263 263 78 79 79 79 79 78 79 79 79 67 67 67 312 67 68 67 312 67 68 312 68 68 68 68 68 314 68 312 68 312 67 67 67 67 67 311 311 48 48 48 48 48 48 48 48 48 48 48 75 76 314 75 75 75 76 314 76 314 313 75 313 314 314 313 313 55 55 57 56 56 56 57 57 56 56 56 57

Item No. WSWSA383 WSWSA3830 WSWSA383S1 WSWSA383W WSWSA385S1 WSWSA386 WSWSA386W WSWSA389W WSWSA38A WSWSA38AF WSWSA38AFRK WSWSA38ARK WSWSA38S1 WSWSA38S1RK WSWSAH3419 WSWSAH3419RK WSWSAK123 WSWSAK123XL WSWSAK124 WSWSAK383 WSWSAK384W WSWSAK385 WSWSAL1210 WSWSAL123 WSWSAL125 WSWSAL3810 WSWSAL383 WSWSAL386 WSWSB16 WSWSB17 WSWSD10 WSWSD13 WSWSD16 WSWSD4S WSWSD6 WSWSDC105 WSWSDE720 WSWSDE721 WSWSDE722 WSWSDE723 WSWSDE724 WSWSDH1412 WSWSDH3812 WSWSDK12 WSWSDK29 WSWSDK32 WSWSDK36 WSWSDK45 WSWSDK6 WSWSDL1224 WSWSDM1 WSWSDM3 WSWSDM4 WSWSDP40H09 WSWSDP40H13 WSWSDP40H15 WSWSDP40H20 WSWSDP40H25 WSWSDP40H30 WSWSDP40P0 WSWSDP40P02 WSWSDP40P03 WSWSDP40P04 WSWSDP40P05 WSWSDP40P12 WSWSDP40S10 WSWSDP40S20 WSWSDP40S24 WSWSDP40S30 WSWSDP40S35 WSWSDP40T10 WSWSDP40T15 WSWSDP40T6 WSWSDP40T7 WSWSDP40T8 WSWSDP40T9 WSWSDP739 WSWSDP740 WSWSDP741 WSWSDP742 WSWSDP743 WSWSDP752 WSWSDPK15 WSWSDPK5 WSWSDPK6 WSWSDPK6H WSWSDPK6P WSWSDPK6S WSWSDPK6T

Page 56 56 22 57 22 56 57 57 55 55 55 55 21 21 75 75 68 67 67 57 57 56 68 68 68 57 57 57 398 398 138 138 138 139 139 136 136 136 136 136 136 48 56 134 139 143 143 139 134 68 222 222 222 142 142 142 142 142 142 142 142 142 142 142 142 142 142 142 142 142 142 142 142 142 142 142 135 135 135 135 135 135 140 143 141 141 141 141 142

Item No. WSWSDPZ13 WSWSDPZ24 WSWSDR100 WSWSDR101 WSWSDR102 WSWSDR103 WSWSDR111 WSWSDR112 WSWSDR113 WSWSDR700 WSWSDR701 WSWSDR702 WSWSDR703 WSWSDR704 WSWSDR705 WSWSDR706 WSWSDR708 WSWSDS730 WSWSDS731 WSWSDS732 WSWSDS733 WSWSDSP729 WSWSDSP730 WSWSDSP731 WSWSDSP740 WSWSDSP742 WSWSDSPK5 WSWSDT10 WSWSDT15 WSWSDT20 WSWSDT25 WSWSDT27 WSWSDT30 WSWSDTK6 WSWSDTL15 WSWSE13E WSWSE1801 WSWSE1802 WSWSE1803 WSWSE1804 WSWSE1805 WSWSE1805A WSWSE1806 WSWSE1807 WSWSE1808 WSWSE1809 WSWSE23R WSWSE23T WSWSE24E WSWSE24R WSWSE24T WSWSE34E WSWSE34R WSWSE34T WSWSE35E WSWSE36R WSWSE36T WSWSE38R WSWSE46E WSWSEC350 WSWSED300 WSWSEE310 WSWSEF400 WSWSEK1830 WSWSEK48 WSWSES1 WSWSES10H WSWSES1H WSWSES2 WSWSES2H WSWSES3 WSWSES3H WSWSES4 WSWSES46R WSWSES4H WSWSES5 WSWSES5H WSWSES6H WSWSES7H WSWSES8H WSWSES9H WSWSESK11 WSWSESK5 WSWSET1450 WSWSHD10 WSWSHD39 WSWSHD8NS WSWSHD9NS WSWSHE35

Page 136 136 135 135 135 135 135 135 135 135 135 135 135 135 135 135 135 135 135 135 135 136 136 136 136 136 134 136 136 136 136 136 136 134 136 137 229 229 229 229 229 229 229 229 229 229 131 133 137 131 133 137 131 133 137 131 133 131 137 326 325 326 325 228 324 230 229 229 230 229 230 229 230 132 229 230 229 229 229 229 229 229 229 325 178 178 316 316 178

411

W405-10 - W413-10_reverseindex.qxp

2/9/10

11:15 AM

Page 412

REVERSE INDEX Item No. WSWSHE35K WSWSHE8NS WSWSHF10NS WSWSHM37 WSWSHM37A WSWSHR10NS WSWSJ601V WSWSJ602V WSWSJ603V WSWSJ605V WSWSJ606V WSWSJ607V WSWSJ612 WSWSJ612A WSWSJ613 WSWSJ613A WSWSJ614 WSWSJ615 WSWSJ622 WSWSJ622A WSWSJ623 WSWSJ623A WSWSJK1 WSWSJK2 WSWSJK2A WSWSJK4 WSWSJK4S WSWSK10 WSWSK117 WSWSK1220 WSWSK1233 WSWSK124 WSWSK12616 WSWSK12620 WSWSK12633 WSWSK12E WSWSK14209 WSWSK3417 WSWSK3421 WSWSK35M WSWSK3811 WSWSK3813S1 WSWSK3820 WSWSK38209 WSWSK3857 WSWSK38609 WSWSK7E WSWSK9 WSWSKC107 WSWSKC110 WSWSKC125 WSWSKC1420 WSWSKC1424 WSWSKC1442 WSWSKC1452 WSWSKC146 WSWSKC148 WSWSKC158 WSWSKC205 WSWSKC213 WSWSKC250 WSWSKC290 WSWSKC300 WSWSKC330 WSWSKC38 WSWSKC3855 WSWSKC500 WSWSKC60 WSWSKC600 WSWSKC650 WSWSKC66 WSWSKC66Z WSWSKC700 WSWSKC73 WSWSKC90 WSWSKC91 WSWSKC98 WSWSKT11 WSWSKT12T WSWSKT20 WSWSKT6 WSWSKT8 WSWSKU12608 WSWSKU38608 WSWSM200 WSWSP02E WSWSP10B WSWSP112R WSWSP126F

412

Page 178 317 317 179 179 317 164 164 162 162 163 163 167 167 168 168 163 163 167 167 168 168 161 168 168 168 167 132 78 63 63 78 64 63 63 137, 307 47 74 74 140 51 21 51 52 51 52 137, 307 130 15 10 13 46 46 46 46 14 8 11 13 10 9 8 9 11 12 51 7 16 6 5 15 16 4 15 14 12 14 47 47 47 66 47 66 53 43 138 279 131 68

Item No. WSWSP126K WSWSP13E WSWSP13NS WSWSP13R WSWSP13TT WSWSP14R WSWSP14T WSWSP212R WSWSP21R WSWSP24E WSWSP24NS WSWSP24R WSWSP24T WSWSP26TT WSWSP36NS WSWSP36R WSWSP36T WSWSP36TT WSWSP386F WSWSP386K WSWSPH05R WSWSPH15R WSWSPH27R WSWSPS16R WSWSPS26R WSWSPZ13R WSWSPZ24R WSWSR04E WSWSR04T WSWSR14E WSWSR14R WSWSR14T WSWSR24E WSWSR24R WSWSR24T WSWSR34E WSWSR34R WSWSR34T WSWSRK5 WSWSRM4025BK WSWSS1224NS WSWSS122A WSWSS122ANS WSWSS122B WSWSS122BNS WSWSS122C WSWSS122CNS WSWSS122D WSWSS122DNS WSWSS122F WSWSS122FNS WSWSS122H WSWSS122HNS WSWSS122I WSWSS122INS WSWSS122K WSWSS122KNS WSWSS122L WSWSS122LNS WSWSS122M WSWSS122MNS WSWSS122N WSWSS122NNS WSWSS122O WSWSS122ONS WSWSS122P WSWSS122PNS WSWSS122Q WSWSS122QNS WSWSS122R WSWSS122RNS WSWSS126A WSWSS126B WSWSS126C WSWSS126D WSWSS126F WSWSS126H WSWSS126I WSWSS126K WSWSS126L WSWSS126M WSWSS126N WSWSS126O WSWSS126P WSWSS126Q WSWSS126R WSWSS12U WSWSS12V WSWSS12X

Page 68 138 311 131 323 131 133 131 131 138 311 131 133 323 311 131 133 323 62 62 132 132 132 132 132 131 131 137 133 137 130 133 137 130 133 137 130 133 230 41 312 70 312 70 312 70 312 70 312 70 312 70 312 70 312 70 312 70 312 70 312 70 312 70 312 70 312 70 312 70 312 69 69 69 69 69 69 69 69 69 69 69 69 69 69 69 80 80 80

Item No. WSWSS12Y WSWSS12Z WSWSS12ZA WSWSS12ZB WSWSS12ZC WSWSS12ZD WSWSS12ZF WSWSS12ZG WSWSS12ZH WSWSS12ZI WSWSS12ZK WSWSS12ZL WSWSS12ZM WSWSS12ZN WSWSS12ZO WSWSS12ZP WSWSS12ZQ WSWSS12ZR WSWSS12ZS WSWSS1420 WSWSS1421 WSWSS1422 WSWSS1423 WSWSS1424 WSWSS1425 WSWSS142A WSWSS142B WSWSS142C WSWSS1459 WSWSS1460 WSWSS1461 WSWSS1462 WSWSS1463 WSWSS1464 WSWSS1465 WSWSS146A WSWSS146B WSWSS146C WSWSS1482 WSWSS1484 WSWSS1485 WSWSS148A WSWSS24TT WSWSS342L WSWSS342M WSWSS342N WSWSS342NNS WSWSS342O WSWSS342ONS WSWSS342P WSWSS342PNS WSWSS342Q WSWSS342QNS WSWSS342R WSWSS342RNS WSWSS342S WSWSS342SNS WSWSS342T WSWSS342TNS WSWSS342U WSWSS342UNS WSWSS342V WSWSS342VNS WSWSS342X WSWSS342XNS WSWSS342Y WSWSS342YNS WSWSS342Z WSWSS342ZA WSWSS342ZANS WSWSS342ZB WSWSS342ZBNS WSWSS342ZC WSWSS342ZCNS WSWSS342ZF WSWSS342ZG WSWSS342ZH WSWSS342ZK WSWSS342ZM WSWSS342ZNS WSWSS34TT WSWSS3824 WSWSS382A WSWSS382B WSWSS382C WSWSS382D WSWSS382F WSWSS382H WSWSS382I

Page 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 49 49 49 49 49 49 49 49 49 49 49 49 49 49 49 49 49 49 49 49 49 49 49 323 76 76 76 314 76 314 76 314 76 314 76 314 76 314 76 314 76 314 76 314 76 314 76 314 76 76 314 76 314 76 314 76 76 76 76 76 314 323 58 58 58 58 58 58 58 58

Item No. WSWSS3862S1 WSWSS3864 WSWSS3864S1 WSWSS386A WSWSS386AS1 WSWSS386B WSWSS386BS1 WSWSS386C WSWSS386CS1 WSWSS386D WSWSS386DS1 WSWSS386F WSWSS386FS1 WSWSS386H WSWSS386HS1 WSWSS386I WSWSS386IS1 WSWSS386K WSWSS386KS1 WSWSS386L WSWSS412R WSWSS41R WSWSS44NS WSWSS44R WSWSS44T WSWSS45TT WSWSS46R WSWSS46T WSWSS53NS WSWSS56NS WSWSS56R WSWSS56T WSWSS56TT WSWSS68R WSWSS68T WSWSS88R WSWSSH25R WSWSSH36R WSWSSP1208 WSWSSP1210 WSWSSP1212 WSWSSP1214 WSWSSS36R WSWSSU126C WSWSSU126D WSWSSU126F WSWSSU126H WSWSSU126I WSWSSU126K WSWSSU126L WSWSSU386A WSWSSU386B WSWSSU386C WSWSSU386D WSWSSU386F WSWSSU386H WSWSSU386I WSWSTR1 WSWSTR2 WSWSTR23 WSWSTR3 WSWSTR4 WSWSTR5 WSWSTR6 WSWSU2448HD WSWSU2466HD WSWT10 WSWT40 WSWTAP1-14NCB WSWTAP1-14NCP WSWTAP1-14NCT WSWTAP1-14NFB WSWTAP1-14NFP WSWTAP1-14NFT WSWTAP1-18NCB WSWTAP1-18NCP WSWTAP1-18NCT WSWTAP1-18NFB WSWTAP1-18NFP WSWTAP1-18NFT WSWTAP1024B WSWTAP1024P WSWTAP1024T WSWTAP1032B WSWTAP1032P WSWTAP1032T WSWTAP10MMB1 WSWTAP10MMB125 WSWTAP10MMB15

Page 22 58 22 58 22 58 22 58 22 58 22 58 22 58 22 58 22 58 22 58 130 130 311 130 133 323 130 133 311 311 130 133 323 130 133 130 132 132 230 230 230 230 132 73 73 73 73 73 73 73 60 60 60 60 60 60 60 171 171 169 170 170 170 170 291 291 214 214 217 216 216 217 216 216 217 216 216 217 216 216 218 217 217 218 217 217 220 220 220

Item No.

Page

WSWTAP10MMP1 WSWTAP10MMP125 WSWTAP10MMP15 WSWTAP10MMT1 WSWTAP10MMT125 WSWTAP10MMT15 WSWTAP1224B WSWTAP1224P WSWTAP1224T WSWTAP12MMB1 WSWTAP12MMB125 WSWTAP12MMB15 WSWTAP12MMB175 WSWTAP12MMP1 WSWTAP12MMP125 WSWTAP12MMP15 WSWTAP12MMP175 WSWTAP12MMT1 WSWTAP12MMT125 WSWTAP12MMT15 WSWTAP12MMT175 WSWTAP12NCB WSWTAP12NCP WSWTAP12NCT WSWTAP12NFB WSWTAP12NFP WSWTAP12NFT WSWTAP14MMB125 WSWTAP14MMB15 WSWTAP14MMB2 WSWTAP14MMP125 WSWTAP14MMP15 WSWTAP14MMP2 WSWTAP14MMT125 WSWTAP14MMT15 WSWTAP14MMT2 WSWTAP14NCB WSWTAP14NCP WSWTAP14NCT WSWTAP14NFB WSWTAP14NFP WSWTAP14NFT WSWTAP16MMB15 WSWTAP16MMB2 WSWTAP16MMP15 WSWTAP16MMP2 WSWTAP16MMT15 WSWTAP16MMT2 WSWTAP18MMB15 WSWTAP18MMB25 WSWTAP18MMP15 WSWTAP18MMP2 WSWTAP18MMT15 WSWTAP18MMT2 WSWTAP1NCB WSWTAP1NCP WSWTAP1NCT WSWTAP1NFB12 WSWTAP1NFB14 WSWTAP1NFP12 WSWTAP1NFP14 WSWTAP1NFT12 WSWTAP1NFT14 WSWTAP20MMB15 WSWTAP20MMB25 WSWTAP20MMP15 WSWTAP20MMP25 WSWTAP20MMT15 WSWTAP20MMT25 WSWTAP22MMB15 WSWTAP22MMB25 WSWTAP22MMP15 WSWTAP22MMP25 WSWTAP22MMT15 WSWTAP22MMT25 WSWTAP34NCB WSWTAP34NCP WSWTAP34NCT WSWTAP34NFB WSWTAP34NFP WSWTAP34NFT WSWTAP38NCB WSWTAP38NCP WSWTAP38NCT WSWTAP38NFB WSWTAP38NFP WSWTAP440B WSWTAP440P WSWTAP440T

219 219 219 218 218 218 218 217 217 220 220 220 220 219 219 219 219 218 218 218 218 217 216 216 217 216 216 220 220 220 219 219 219 218 218 218 217 216 216 217 216 216 220 220 219 219 218 218 220 220 219 219 218 218 217 216 216 217 217 216 216 216 216 220 220 219 219 218 218 220 220 219 219 218 218 217 216 216 217 216 216 217 216 216 217 216 218 217 217

Item No. WSWTAP4MMB5 WSWTAP4MMB7 WSWTAP4MMB75 WSWTAP4MMP5 WSWTAP4MMP7 WSWTAP4MMP75 WSWTAP4MMT5 WSWTAP4MMT7 WSWTAP4MMT75 WSWTAP516NCB WSWTAP516NCP WSWTAP516NCT WSWTAP516NFB WSWTAP516NFP WSWTAP516NFT WSWTAP58NCB WSWTAP58NCP WSWTAP58NCT WSWTAP58NFB WSWTAP58NFP WSWTAP58NFT WSWTAP5MMB5 WSWTAP5MMB8 WSWTAP5MMB9 WSWTAP5MMP5 WSWTAP5MMP8 WSWTAP5MMP9 WSWTAP5MMT5 WSWTAP5MMT8 WSWTAP5MMT9 WSWTAP632B WSWTAP632P WSWTAP632T WSWTAP640B WSWTAP640P WSWTAP640T WSWTAP6MMB1 WSWTAP6MMB5 WSWTAP6MMB75 WSWTAP6MMP1 WSWTAP6MMP5 WSWTAP6MMP75 WSWTAP6MMT1 WSWTAP6MMT5 WSWTAP6MMT75 WSWTAP716NCB WSWTAP716NCP WSWTAP716NCT WSWTAP716NFB WSWTAP716NFP WSWTAP716NFT WSWTAP78NCB WSWTAP78NCP WSWTAP78NCT WSWTAP78NFB WSWTAP78NFP WSWTAP78NFT WSWTAP832B WSWTAP832P WSWTAP832T WSWTAP8MMB1 WSWTAP8MMB125 WSWTAP8MMB5 WSWTAP8MMP1 WSWTAP8MMP125 WSWTAP8MMP5 WSWTAP8MMT1 WSWTAP8MMT125 WSWTAP8MMT5 WSWTAP916NCB WSWTAP916NCP WSWTAP916NCT WSWTAP916NFB WSWTAP916NFP WSWTAP916NFT WSWTB2304RL WSWTB2305RL WSWTB2603MS WSWTB2603RL WSWTB2606RHD WSWTB2606TS WSWTB2607RL WSWTB2609TS WSWTB2612THD WSWTB2707SLBK WSWTB302SCBK WSWTB303SC WSWTB303SCBK WSWTB4209HD

Page 219 219 219 219 219 219 218 218 218 217 216 216 217 216 216 217 216 216 217 216 216 219 219 219 219 219 219 218 218 218 218 217 217 218 217 217 219 219 219 219 219 219 218 218 218 217 216 216 217 216 216 217 216 216 217 216 216 218 217 217 219 220 220 219 219 219 218 218 218 217 216 216 217 216 216 42 42 29 30 30 29 30 29 30 34 28 28 28 37

www.westwardtools.ca

W405-10 - W413-10_reverseindex.qxp

2/9/10

11:15 AM

Page 413

REVERSE INDEX Item No. WSWTB4213HD WSWTB5605THD WSWTB5611RHD WSWTB7202SHD WSWTB7212THD WSWTB7220RHD WSWTBC20S WSWTBC20SK WSWTBC24P WSWTBC26S WSWTBH2103 WSWTBJ3219 WSWTBJ4524 WSWTBJ4824 WSWTBP20P WSWTBP23P WSWTBP38P WSWTBT1430 WSWTBT1549 WSWTC283S WSWTC291S WSWTC48W WSWTCH21BK WSWTCH33BK WSWTCH43BK WSWTCH48BK WSWTCH52BK WSWTCK3 WSWTDC1S2PR WSWTDR1J5 WSWTDR1S5 WSWTDR2F9 WSWTDR2J5H WSWTDR2J8H WSWTDR2J9 WSWTG120 WSWTG120P WSWTG26M WSWTG50P WSWTG50PN WSWTG50S WSWTGD100 WSWTGD100D WSWTGE250F WSWTGE99 WSWTGE99M WSWTGT120 WSWTGT150 WSWTICO602 WSWTICO602B WSWTICO605 WSWTICO608 WSWTL1000T WSWTL250C WSWTL500T WSWTL500U WSWTLB150 WSWTLB250 WSWTLB500 WSWTM1100 WSWTM2000 WSWTP1012 WSWTP1012HD WSWTP1012L WSWTP1216 WSWTP1216HD WSWTP1216L WSWTP1520 WSWTP1620HD WSWTP1620L WSWTP2030 WSWTP2030HD WSWTP2030L WSWTP3050 WSWTP307 WSWTP323 WSWTP336 WSWTP407 WSWTP410D WSWTP411A WSWTP416 WSWTP420 WSWTP500A WSWTP510V WSWTP68 WSWTP68HD WSWTP68L WSWTP700B WSWTP810

Page 37 38 37 39 39 39 27 27 27 27 29 44 44 44 25 25 25 28 28 291 291 291 27 27 27 27 27 180 264 264 264 264 265 265 264 395 395 397 395 395 395 395 395 396 396 396 396 395 391 391 391 391 248 249 248 248 249 249 249 125 125 293 293 293 293 293 293 293 293 293 293 293 293 293 24 23 24 24 23 23 23 24 25 25 293 293 293 25 293

Item No. WSWTPA31 WSWTPB10 WSWTPG11 WSWTPG22 WSWTPG60CV WSWTPG60S WSWTPG75CV WSWTPGA120 WSWTPGA50 WSWTPGA50D WSWTPP20 WSWTR20 WSWTR20W WSWTR2C WSWTS10K WSWTS10LR WSWTS10RG WSWTS10SY WSWTS1240 WSWTS1245 WSWTS1247 WSWTS1250 WSWTS1255 WSWTS1260 WSWTS1270 WSWTS1410 WSWTS1410T WSWTS1415 WSWTS1415T WSWTS1420 WSWTS1420T WSWTS1425 WSWTS1425T WSWTS1427 WSWTS1427T WSWTS1430 WSWTS1430T WSWTS1440 WSWTS3825 WSWTS3830 WSWTS3840 WSWTS3840T WSWTS3845 WSWTS3845T WSWTS3847 WSWTS3850 WSWTS3850T WSWTS3855 WSWTS3855T WSWTS3860 WSWTS3860T WSWTSD10 WSWTSD13 WSWTSF10K WSWTSF10LR WSWTSF10RG WSWTSI146 WSWTSI147 WSWTSI148 WSWTSI3810 WSWTSI3812 WSWTSI3814 WSWTSI3816 WSWTSI3818 WSWTWA12 WSWTWA12150 WSWTWA34 WSWTWA38 WSWTWB12150 WSWTWC12 WSWTWC12100 WSWTWC14 WSWTWC38 WSWTWD12 WSWTWD12150 WSWTWD12150USB WSWTWD12USB WSWTWD38 WSWTWD38USB WSWTWP12100 WSWTWP12120 WSWTWP12140 WSWTWP1260 WSWTWP1280 WSWTWPK5 WSWTWR4 WSWTWR5 WSWTWR6 WSWTWR7

www.westwardtools.ca

Page 379 376 378 378 379 383 379 379 379 379 378 278 278 278 177 176 176 176 73 73 73 73 73 73 73 50 50 50 50 50 50 50 50 50 50 50 50 50 61 61 61 61 61 61 61 61 61 61 61 61 61 177 177 177 177 177 50 50 50 62 62 62 62 62 127 127 127 127 125 126 126 126 126 128 128 128 128 128 128 125 125 125 125 125 125 214 214 214 214

Item No.

Page

WSWTWR8 214 WSWTZ6PNS 316 WSWUC1 257 WSWUC15 257 WSWUC2 257 WSWUC3 257 WSWUC4 257 WSWUC5 257 WSWUC6 257 WSWUE120SV 298 WSWUE712 297 WSWUL25 26 WSWUL35 26 WSWUL50 26 WSWULK3 26 WSWV4 202 WSWV6 202 WSWV8 202 WSWVCH1 261 WSWVCH12 261 WSWVCH12L15 261 WSWVCH12L20 261 WSWVCH12L25 261 WSWVCH1L15 261 WSWVCH1L20 261 WSWVCH1L25 261 WSWVCH2 261 WSWVCH2L15 261 WSWVCH2L20 261 WSWVCH2L25 261 WSWVCH3 261 WSWVCH3L15 261 WSWVCH3L20 261 WSWVCH3L25 261 WSWVCH5 261 WSWVCH5L15 261 WSWVCH5L20 261 WSWVCH5L25 261 WSWVGT2DS 262 WSWVGT3DS 262 WSWVGT5DS 262 WSWVK1221 19 WSWVK1423 18 WSWVK1448 18 WSWVK3823 19 WSWVPT12DS 262 WSWVPT1DS 262 WSWVPT2DS 262 WSWVPT3DS 262 WSWVPT5DS 262 WSWVRA4220BK 40 WSWVRB4211BK 33 WSWVRB5610BK 34 WSWVRB7515BK 40 WSWVRL701A1-12 261 WSWVRL701A3 261 WSWVRL701A34 261 WSWVRL701A6 261 WSWVRL709A3 261 WSWVRL709A6 261 WSWVRL709AH 261 WSWVRL709AH34 261 WSWVRL740-1-12 261 WSWVRL740-3 261 WSWVRL740-34 261 WSWVRL740-6 261 WSWVRL810-1-12 261, 262 WSWVRL810-3-6 261, 262 WSWVRL810-34 261, 262 WSWVRS4200BK 33 WSWVRS4201BK 33 WSWVRS5600BK 34 WSWVRT4210BK 33 WSWVRT5606BK 34 WSWVWR12 263 WSWVWR14 263 WSWVWR15 260 WSWVWR15L10 260 WSWVWR15L15 260 WSWVWR15L20 260 WSWVWR15L25 260 WSWVWR30 260 WSWVWR30L10 260 WSWVWR30L15 260 WSWVWR30L20 260 WSWVWR30L25 260 WSWVWR34 260 WSWVWR34L10 260 WSWVWR34L15 260

Item No. WSWVWR34L20 WSWVWR34L25 WSWVWR60 WSWVWR60L10 WSWVWR60L15 WSWVWR60L20 WSWVWR60L25 WSWW8 WSWWB5903SW WSWWB60PW WSWWBL WSWWBPB WSWWBS3 WSWWBS3B WSWWBS3SL WSWWBS3SS WSWWBS3SSL WSWWBS4SL WSWWBS4SSL WSWWBT WSWWC1 WSWWC10 WSWWC10NS WSWWC18A WSWWC18ANS WSWWC2 WSWWC21 WSWWC22 WSWWC23 WSWWC24 WSWWC25 WSWWC26 WSWWC27 WSWWC27A WSWWC28 WSWWC28A WSWWC28ANS WSWWC28NS WSWWC29 WSWWC29A WSWWC3 WSWWC30 WSWWC30NS WSWWC31 WSWWC32 WSWWC34 WSWWC34NS WSWWC35 WSWWC37 WSWWC38 WSWWC3K WSWWC3K1 WSWWC3K12 WSWWC3K34 WSWWC4 WSWWC40 WSWWC41 WSWWC42 WSWWC45LR WSWWC49 WSWWC4L WSWWC4XL WSWWC5 WSWWC50 WSWWC51 WSWWC5NS WSWWC6 WSWWC60 WSWWC6L WSWWC6NS WSWWC6XL WSWWC7 WSWWC7NS WSWWC80 WSWWC81 WSWWC82 WSWWC83 WSWWC8385 WSWWC8386 WSWWC84 WSWWC84NS WSWWCB3 WSWWCB3C WSWWCB3CSS WSWWCB3R WSWWCB3SS2 WSWWCB4R WSWWCB5R WSWWCB6R

Page 260 260 260 260 260 260 260 165 42 42 42 42 204 204 204 204 204 204 204 42 192 192 319 194 319 192 193 193 193 193 193 193 193 193 193 193 319 319 193 193 192 193 319 193 194 192 319 192 193 193 195 195 195 195 192 194 194 194 191 193 192 192 192 193 193 319 192 193 192 319 192 192 319 193 193 193 193 193 193 193 319 203 203 203 203 203 203 203 203

Item No.

Page

WSWWCBS234C WSWWCBS312 WSWWECART1 WSWWECART2 WSWWEGASHO WSWWEH8HR WSWWEH8LCF WSWWEH8LCN WSWWEH8LD WSWWEH8LDCR WSWWEH8LDSR WSWWEH8P WSWWEH8PCR WSWWEH8PSR WSWWEH8SB WSWWEHPCN WSWWEMW100LD WSWWEMW130LD WSWWEMW180MS WSWWEMW190LD WSWWEPC40LD WSWWEPC40LD-CL WSWWEPC40LD-CVR WSWWEPC40LD-ELE WSWWEPC40LD-NZL WSWWEPC40LD26 WSWWEPC40LD27 WSWWEPC40LD43 WSWWH10F WSWWH12F WSWWH12P WSWWH8 WSWWH8F WSWWH8P WSWWJB8 WSWWJB8F WSWWJB8P WSWWLL30R WSWWLL60C WSWWP6R WSWWP8R WSWWPC14R WSWWPC25R WSWWPC7R WSWWS3301SW WSWWS3302SW WSWWS3305SW WSWWS5402SW WSWWS5405SW WSWWS6003SWM WSWWWB4 WSWWWB478SB WSWWWB478SBSS WSWWWB5 WSWWWB578SB WSWWWB578SBSS WSWWWB5SB WSWWWB6 WSWWWB612SB WSWWWB6SB WSWX2 WSWX3 WSWX4 WSWXB650 WSWYE11215 WSWYE11215-3 WSWYE1122GF WSWYE11230 WSWYE11230-3 WSWYE11408 WSWYE11408-3 WSWYE11415 WSWYE11415-3 WSWYE11430 WSWYE11430-3 WSWYE21603 WSWYE21603B WSWYE21605 WSWYE21605B WSWYE21610 WSWYE21615 WSWYE21630 WSWYE31015 WSWYE31030 WSWYE31208 WSWYE31208-3 WSWYE31215 WSWYE31215-3 WSWYE31230

203 203 300 300 300 301 301 301 301 301 301 301 301 301 301 301 298 299 299 299 300 300 300 300 300 300 300 300 367 367 367 367 367 367 367 367 367 250 250 192 192 191 191 191 41 41 41 41 42 40 204 204 204 204 204 204 204 204 204 204 240 240 241 238 251 251 253 251 251 251 251 251 251 251 251 251 254 251 254 251 251 251 252 252 252 252 252 252 252

Item No. WSWYE31230-3 WSWYE31408 WSWYE31415 WSWYE31430 WSWYE31608 WSWYE31615 WSWYE31630 WSWYE41410 WSWYE41415 WSWYE41430 WSWYE41610 WSWYE41615 WSWYE41630 WSWYEBC120C WSWYEBC416C WSWYEBCC500B WSWYEBCC500R WSWYEBCC800B WSWYEBCC800R WSWYECR1215 WSWYECR1230 WSWYECR1415 WSWYECR1430 WSWYELS1210 WSWYELS1210M WSWYELS1210MC WSWYELS125 WSWYEPB618 WSWYEPB718 WSWYEPS1208 WSWYEWL08M WSWYEWL08P WSWYS1180NS WSWYS1185 WSWYS1190 WSWYS1192 WSWYS1192A WSWYS15 WSWYS18 WSWYT1 WSWYT2 WSWZ701TA1 WSWZ701TA12 WSWZ701TA2 WSWZ701TA3 WSWZ701TA5 WSWZ709A1 WSWZ709A12 WSWZ709A2 WSWZ709A3 WSWZ709A5 WSWZ740A1 WSWZ740A12 WSWZ740A2 WSWZ740A3 WSWZ740A5 WSWZ820L12 WSWZ820L2

Page 252 252 252 252 252 252 252 252 252 252 252 252 252 254 254 254 254 254 254 253 253 253 253 249 249 249 249 253 253 252 250 250 320 199 197 194 194 200 200 389 389 262 262 262 262 262 262 262 262 262 262 262 262 262 262 262 262 262

413

W414-10 - W416-10_productindex.qxp

2/9/10

11:15 AM

Page 414

INDEX Adjustable Wrenches & Parts . . . . . . . . . . . . . . . . . . . . . . . . . 121 Air Chain Hoists . . . . . . . . . . . . . . 260 Connectors . . . . . . . . . . . . . . . 368 Couplers . . . . . . . . . . . . . . . . . 368 Cutting Tools. . . . . . . . . . . . . . 365 Die Grinders . . . . . . . . . . . . . . 364 Drills . . . . . . . . . . . . . . . . . . . . 365 Grinders. . . . . . . . . . . . . . . . . . 364 Hammers . . . . . . . . . . . . 366, 367 High Speed Cutters . . . . . . . . 364 Impact Wrenches. . . . . . 362, 363 Line Filters, Regulators & Lubricators . . . . . . . . 369 - 373 Nibblers. . . . . . . . . . . . . . . . . . 365 Ratchets . . . . . . . . . . . . . . . . . 363 Sanders . . . . . . . . . . . . . . . . . . 363 Scalers/Chippers . . . . . . 366, 367 Screwdrivers . . . . . . . . . . . . . . 365 Shears . . . . . . . . . . . . . . . . . . . 365 Tool Accessories . . . . . . . . . . . 368 Air Operated, Grease Guns . . . 382 Air/Hydraulic Jacks . . . . . 270 - 272 Air/Manual Jacks. . . . . . . . . . . . 273 Angle Finders . . . . . . . . . . . . . . 237, 238 Grinders. . . . . . . . . . . . . . . . . . 364 Antifreeze Coolant . . . . . . . . . . . . . . . . . . 390 Tester . . . . . . . . . . . . . . . . . . . . 390 Aprons Disposable . . . . . . . . . . . . . . . 336 Leather . . . . . . . . . . . . . . 302, 303 Asbestos Abatement, Disposable Clothing . . . . . . . . . . . . . 334, 335 Automatic Drains. . . . . . . . . . . . 371 Automotive Air Tools . . . . . . . . . . . . 362 - 366 Specialty Tools . . . . . . . . 393, 394 Test Equipment . . . . . . . . . . . 245 Tool Kits . . . . . . . . . . . . . . . 15, 16 Awls . . . . . . . . . . . . . . . . . . . . . . . 196 Axes . . . . . . . . . . . . . . . . . . . . . . . 190 Axle Stands . . . . . . . . 272, 274, 275 Ball Joint Separators. . . . . . . . . 394 Banded Earplugs. . . . . . . . 352, 353 Bandsaws . . . . . . . . . . . . . . 297, 298 Bar Clamps & Accessories . . . . . . . . . . . . . . . . . . . . 201, 202 Barrels, Transfer Pumps. . 376, 377 Barricade Tapes . . . . . . . . . . . . . 350 Batteries Carriers . . . . . . . . . . . . . . . . . . 393 Chargers & Testers . . . . . . . . . 390 Straps . . . . . . . . . . . . . . . . . . . 393 Terminal Cleaners & Protectors. . . . . . . . . . . . . . 392 Terminal Cleaning Tools . . . . 392 Terminal Pullers . . . . . . . . . . . 392 Bearing Packers . . . . . . . . . . . . . 394 Bench Grinders. . . . . . . . . . . . . . . . . . 295 Presses . . . . . . . . . . . . . . 279, 280 Work . . . . . . . . . . . . . . . . . . . . . 42 Benders, Tubing . . . . . . . . . . . . . 182 Bib Overalls . . . . . . . . . . . . . . . . 340 Bib Pants. . . . . . . . . . . . . . . . . . . 346 Rainwear. . . . . . . . . . . . . 337, 338 Bits Hex Sockets . . . . . . . . . . . . 55, 66 Tork Sockets . . . . . . . . . . . . 47, 66 Blades Hacksaw . . . . . . . . . . . . . . . . . 224 Reciprocating Saw . . . . . . . . . 224 Body Shop Dollies. . . . . . . . . . . 398 Body Shop Tools . . . . . . . . 397, 398 Bolt Cutters . . . . . . . . . . . . 179, 180 Booster Cables . . . . . . . . . . . . . . 254 Boot Scrubbers . . . . . . . . . . . . . 341

414

Bottle Jacks. . . . . . . . . . . . . . . . . 267 Boxes Jobsite . . . . . . . . . . . . . . . . . 28, 44 Storage . . . . . . . . . . . . . . . . . . . 25 Tools . . . . . . . . . . . . . . . . . . . . . 43 Brake Drum Dollies. . . . . . . . . . 277 Brushes Cup . . . . . . . . . . . . . . . . . . . . . 203 Hand . . . . . . . . . . . . . . . . . . . . 204 Parts Cleaning . . . . . . . . . . . . 389 Scratch. . . . . . . . . . . . . . . . . . . 204 Wheel . . . . . . . . . . . . . . . . . . . 204 Bulbs, Halogen. . . . . . . . . . . . . . 249 Bump Caps . . . . . . . . . . . . . . . . . 351 C-Clamps . . . . . . . . . . . . . . . . . . . 201 Cabinets, Key . . . . . . . . . . . . . . . 324 Cable Clamps . . . . . . . . . . . . . . . . . . 257 Reels . . . . . . . . . . . . . . . . . . . . 253 Tie Mounts . . . . . . . . . . . . . . . 257 Ties . . . . . . . . . . . . . . . . . . . . . 258 Calipers . . . . . . . . . . . . . . . . . . . . 236 Dial . . . . . . . . . . . . . . . . . . . . . 232 Digital . . . . . . . . . . . . . . . . . . . 232 Vernier . . . . . . . . . . . . . . . . . . . 232 Caps, Safety . . . . . . . . . . . . . . . . 351 Cardlock Safes . . . . . . . . . . . . . . 326 Carts Landscaping . . . . . . . . . . . . . . 291 Service . . . . . . . . . . . . . . . . . . . 291 Utility . . . . . . . . . . . . . . . . . . . . 291 Welding . . . . . . . . . . . . . . . . . . 300 Cases, Instrument . . . . . . . . . . . . 27 Caulking Guns . . . . . . . . . . . . . . 388 Caution Signs & Tags . . . . . . . . . . . . . . 324 Tape . . . . . . . . . . . . . . . . . . . . . 350 Chain Accessories . . . . . . . . . . . . . . . 265 Fittings. . . . . . . . . . . . . . . . . . . 265 Hardware . . . . . . . . . . . . . . . . 265 Hooks . . . . . . . . . . . . . . . . . . . 265 Links . . . . . . . . . . . . . . . . . . . . 265 Pullers . . . . . . . . . . 260, 261, 263 Chairs. . . . . . . . . . . . . . . . . . . . . . 291 Chests & Cabinets, Tools . . . . . . . . . . . . 28 - 30, 37, 39, 41 Chipping Hammers . . . . . . . . . . 190 Electric . . . . . . . . . . . . . . . . . . . 190 Chisel Retainers. . . . . . . . . . . . . 368 Chisels Air Hammer . . . . . . . . . . 366, 367 Metal. . . . . . . . . . . . . . . . 192, 194 Wood . . . . . . . . . . . . . . . . . . . . 195 Clamps Bar. . . . . . . . . . . . . . . . . . 201, 202 C 201 Electrical Cable . . . . . . . . . . . . 257 Cleaners, Parts . . . . . . . . . . . . . . 294 Clothing Disposable . . . . . . . . . . . . . . . 336 General Workwear . . . . . . . . . 339 Traffic. . . . . . . . . . . . . . . 342 - 349 Welder's . . . . . . . . . . . . . 302, 303 Clutch Jack . . . . . . . . . . . . . 271, 272 Coats . . . . . . . . . . . . . . . . . . . . . . 347 Traffic . . . . . . . . . . . . . . . . . . . . 347 Colour Coding Tape . . . . . . . . . . 257 Combination Wrenches & Sets . . . . . . . . . . . . . . . . 20, 100 - 102 Compression Testers. . . . . . . . . 393 Compressors, Strut Spring . . . . 277 Cones, Traffic . . . . . . . . . . . . . . . 350 Connectors, Air . . . . . . . . . . . . . 368 Construction Lighting . . . . . . . . 249 Coolant Testers . . . . . . . . . . . . . 390 Corded Earplugs . . . . . . . . . . . . 352 Cords Extension . . . . . . . . 251, 252, 254 GFCI . . . . . . . . . . . . . . . . . . . . . 253

Reels . . . . . . . . . . . . . . . . . . . . 253 Cotter Pin Pullers. . . . . . . . . . . . 197 Cotton Duck Bib Overalls . . . . . . . . . . . . . . 340 Coveralls . . . . . . . . . . . . . . . . . 341 Jackets . . . . . . . . . . . . . . . . . . . 340 Vests . . . . . . . . . . . . . . . . . . . . 340 Couplers, Grease Gun. . . . . . . . 383 Coveralls . . . . . . . . . . . . . . . . . . . 339 Cotton Duck . . . . . . . . . . . . . . 341 Disposable . . . . . . . . . . 334 - 336 Insulated . . . . . . . . . . . . . . . . . 341 Cranes, Hydraulic. . . . . . . . . . . . 275 Creepers . . . . . . . . . . . . . . . . . . . 281 Crimpers, Terminal . . . . . . . . . . 160 Crowfoot Wrench Sets . . . . . . . . 54 Crowfoot Wrenches. . . . . . . . . . . 62 Cup Brushes . . . . . . . . . . . . . . . . 203 Cut-Resistant Gloves . . . . 330, 332 Cutters Cable . . . . . . . . . . . . . . . . . . . . 181 Tubing . . . . . . . . . . . . . . . 180, 181 Cylinders, Hydraulic . . . . . . . . . 276 Danger Barricade Tape . . . . . . . 350 Dial Calipers . . . . . . . . . . . . . . . . . . 232 Indicator Stands . . . . . . . . . . . 235 Indicators . . . . . . . . . . . . 235, 236 Magnetic Base . . . . . . . . . . 236 Die Grinders . . . . . . . . . . . . . . . . 364 Dies Hex . . . . . . . . . . . . . . . . . . . . . 222 Round Adjustable . . . . . 220, 221 Wrenches. . . . . . . . . . . . . . . . . 214 Digital Calipers . . . . . . . . . . . . . . . . . . 232 Indicators . . . . . . . . . . . . . . . . 235 Dispensers Fluid. . . . . . . . . . . . . . . . . . . . . 378 Gear Oil . . . . . . . . . . . . . . . . . . 378 Glove . . . . . . . . . . . . . . . . . . . . 333 Disposable Clothing . . . . . . . . . . . . 334 - 336 Coveralls . . . . . . . . . . . . . 334, 335 Earplugs & Dispensers . . . . . . 352 Gowns . . . . . . . . . . . . . . . . . . . 335 Respirators . . . . . . . . . . . 358, 359 Dividers . . . . . . . . . . . . . . . . . . . . 236 Dollies Brake Drum . . . . . . . . . . . . . . 277 Wheel . . . . . . . . . . . . . . . . . . . 277 Dolly & Body Hammer Set . . . . 397 Drill Dispensers . . . . . . . . . . . . . . . 208 Presses . . . . . . . . . . . . . . 296, 297 Drill Bits Jobber . . . . . . . . . . . . . . . . . . . 209 Prentice . . . . . . . . . . . . . . . . . . 210 Reduced Shank . . . . . . . . . . . 210 Screw Machine . . . . . . . . . . . . 209 Sets . . . . . . . . . . . . . . . . . . . . . 208 Stubby . . . . . . . . . . . . . . . . . . . 209 Drills Air . . . . . . . . . . . . . . . . . . . . . . 365 Index Box . . . . . . . . . . . . . . . . 208 Drum Cradles . . . . . . . . . . . . . . . . . . 284 Handling Equipment. . . 284, 285 Loaders . . . . . . . . . . . . . . . . . . 285 Truck . . . . . . . . . . . . . . . . . . . . 284 Ear Muffs . . . . . . . . . . . . . . . . . . . . 353 Plugs . . . . . . . . . . . . . . . . 352, 353 Electric Chain Hoists . . . . . . . . . . . . . . 260 Power Tools . . . . . . . . . . . . . . 295 Electrical Cable Reels . . . . . . . . . . . . . . . 253 Tape . . . . . . . . . . . . . . . . . . . . . 257 Electrician Hole Saw Kits . . . . . 226 Electronic Safes . . . . . . . . . . . . . 326

Engine Cranes . . . . . . . . . . . . . . . . . . . 275 Stands . . . . . . . . . . . . . . . 276, 277 Examination Gowns . . . . . . . . . 335 Extension Cords . . . . . . . . . . . 251, 252, 254 Sockets . . . . . . . 56, 57, 67, 68, 92 Extractors Oil . . . . . . . . . . . . . . . . . . . . . . 393 Screw . . . . . . . . . . . . . . 228 - 230 Eye Safety Glasses . . . . . . 354, 356 Eye Protection Faceshields . . . . . . . . . . . . . . . 357 Goggles . . . . . . . . . . . . . . . . . . 357 Safety Glasses. . . . . . . . 354 - 357 Visitor Specs . . . . . . . . . . . . . . 357 Eyewear Safety Glasses. . . . . . . . 354 - 357 Visitor Specs . . . . . . . . . . . . . . 357 Face Shield Windows . . . . . . . . . . . 357 Shields. . . . . . . . . . . . . . . 357, 358 Fall Protection . . . . . . . . . . . . . . 360 Feeler Gauges . . . . . . . . . . 239, 240 Fencing . . . . . . . . . . . . . . . . . . . . 324 Files. . . . . . . . . . . . . . . . . . . 205, 206 Flat . . . . . . . . . . . . . . . . . . . . . . 398 Filters, Airline. . . . . . . . . . 369 - 373 Fittings, Grease . . . . . . . . 384 - 386 Flame Resistant Rainwear . . . . 338 Flare Nut Wrenches. . . . . . 117, 118 Flaring Tools. . . . . . . . . . . . 181, 182 Flashlights & Accessories . . . . . . . . . . . . . . . . . . . . 255, 256 Floor Creepers . . . . . . . . . . . . . . . . . 281 Jacks . . . . . . . . . . . . . . . 268 - 272 Fluid Dispensers . . . . . . . . . . . . 378 Folding Chairs. . . . . . . . . . . . . . . . . . . . 291 Tables . . . . . . . . . . . . . . . . . . . 292 Forklift Jacks. . . . . . . . . . . . . . . . 272 Fuel Pumps . . . . . . . . . . . . 376, 377 Funnel Kits . . . . . . . . . . . . . . . . . 389 Galvanized Pallet Trucks . . . . . 288 Gasket Scrapers . . . . . . . . . . . . . 196 Gauges Air & Fluid . . . . . . . . . . . . . . . . 371 Air Pressure. . . . . . . . . . . . . . . 371 Center . . . . . . . . . . . . . . . 215, 237 Drill . . . . . . . . . . . . . . . . . 210, 237 Feeler . . . . . . . . . . . . . . . 239, 240 Ignition . . . . . . . . . . . . . . . . . . 239 Inflator. . . . . . . . . . . . . . . . . . . 396 Pitch . . . . . . . . . . . . . . . . 215, 237 Small Hole . . . . . . . . . . . . . . . 234 Telescoping . . . . . . . . . . . . . . . 234 Tire . . . . . . . . . . . . . . . . . 395, 396 Gear Oil Dispensers . . . . . . . . . . . . 378 Pullers . . . . . . . . . . . . . . . . . . . 266 Pumps . . . . . . . . . . . . . . . . . . . 378 GFCI Extension Cords . . . . . . . . 253 Gloves Cotton & String Knit. . . 327 - 329 Cut-Resistant . . . . . . . . . 330, 332 Disposable . . . . . . . . . . . . . . . 333 Fire Resistant . . . . . . . . . . . . . 331 High Visibility . . . . . . . . . 327, 328 Mechanic's . . . . . . . . . . . . . . . 330 Nitrile . . . . . . . . . . . 329, 332, 333 Performance Style . . . . . . . . . 331 Polyurethane Coated . . . . . . . 327 Synthetic . . . . . . . . . . . . . . . . . 327 Winter . . . . . . . . . . . . . . . 328, 332 Goggles, Safety . . . . . . . . . . . . . 357 Gowns Disposable . . . . . . . . . . . . . . . 335 Examination . . . . . . . . . . . . . . 335 Grease Fittings & Assortments. . . 384 - 386

www.westwardtools.ca

W414-10 - W416-10_productindex.qxp

2/9/10

11:15 AM

Page 415

INDEX Fittings & Tools . . . . . . . . . . . . 383 Guns . . . . . . . . . . . . . . . 380 - 382 Air Operated . . . . . . . . . . . 382 Pumps. . . . . . . . . . . . . . . 378, 379 Grinders Bench . . . . . . . . . . . . . . . . . . . 295 Die . . . . . . . . . . . . . . . . . . . . . . 364 Ground Fault Circuit Interrupter Cords. . . . . . . . . . . . . . . . . . . . 253 Guns Grease. . . . . . . . . . . . . . 380 - 382 Rivets . . . . . . . . . . . . . . . . . . . . 388 Soldering. . . . . . . . . . . . . . . . . 304 Suction . . . . . . . . . . . . . . . . . . 378 Hacksaws . . . . . . . . . . . . . . 223, 224 Blades . . . . . . . . . . . . . . . . . . . 224 Halogen Bulbs . . . . . . . . . . . . . . . . . . . . 249 Clamp Lights. . . . . . . . . . . . . . 249 Work Lights . . . . . . . . . . 248, 249 Hammers. . . . . . . . . . . . . . . . . . . 186 Air . . . . . . . . . . . . . . . . . . 366, 367 Ball Pein . . . . . . . . . . . . . . . . . 186 Body Shop . . . . . . . . . . . . . . . 398 Chipping . . . . . . . . . . . . . . . . . 190 Claw. . . . . . . . . . . . . . . . . . . . . 187 Dead Blow . . . . . . . . . . . . . . . 188 Dolly & Body . . . . . . . . . . . . . . 397 Handles . . . . . . . . . . . . . . . . . . 186 Sledge . . . . . . . . . . . . . . . 188, 189 Soft Face. . . . . . . . . . . . . 188, 190 Hand Chain Hoists . . . . . . . . . . . . . . 261 Lamps & Accessories. . . 250, 253 Trucks . . . . . . . . . . . . . . . . . . . 282 Handling, Drum. . . . . . . . . 284, 285 Hard Hats, Safety Caps & Hats . . . . . . . . . . . . . . . . . . . . . . . . . 351 Harnesses Fall Arresting . . . . . . . . . . . . . . 360 Traffic . . . . . . . . . . . . . . . . . . . . 344 Headgear Faceshields . . . . . . . . . . . . . . . 357 Safety Caps & Hats. . . . . . . . . 351 Hearing Protection Banded Earplugs . . . . . . 352, 353 Earmuffs . . . . . . . . . . . . . . . . . 353 Earplugs . . . . . . . . . . . . . 352, 353 Helmets, Welding . . . . . . . . . . . 301 Hex Keys . . . . . . . . . . . . . . 153 - 156 Long. . . . . . . . . . . . . . . . . . . . . 152 Sets . . . . . . . . . . . . 152, 155 - 158 Short . . . . . . . . . . . . . . . . . . . . 152 High Visibility Gloves . . . . . . . . 328 Hoists Chain . . . . . . . . . . . . . . . . . . . . 263 Electric . . . . . . . . . . . . . . . . 260 Hand . . . . . . . . . . . . . . . . . . 261 Lever . . . . . . . . . . . . . 260, 261 Manual . . . . . . . . . . . . . . . . 261 Trolleys . . . . . . . . . . . . . . . . 262 Hooks . . . . . . . . . . . . . . . . . . . 265 Hole Cutters . . . . . . . . . . . . . . . . . . . 226 Saws, Accessories & Kits . . . . . . . . . . . . . . 225, 227, 228 Hollow Punches. . . . . . . . . . . . . 195 Hoodie, Traffic . . . . . . . . . . . . . . 346 Hook & Pick Sets, Seals . . 196, 197 Hooks, Chain . . . . . . . . . . . . . . . 265 Hose Grease Gun. . . . . . . . . . . . . . . 384 Nozzle . . . . . . . . . . . . . . . . . . . 389 Reels. . . . . . . . . . . . 301, 374, 375 Hydraulic Axle Jack . . . . . . . . . . . . . . . . . 271 Cylinders . . . . . . . . . . . . . . . . . 276 Grease Gun Coupler . . . . . . . 383 Jacks . . . . . . . . . . . . . . . 267 - 272 Pipe Bender . . . . . . . . . . . . . . 280 Presses . . . . . . . . . . . . . . 279, 280 Pullers . . . . . . . . . . . . . . . . . . . 266

Pumps . . . . . . . . . . . . . . . . . . . 278 Rams . . . . . . . . . . . . . . . . 266, 276 Ignition Gauges . . . . . . . . . . . . . 239 Illuminated Magnifiers . . . . . . . 248 Impact Air Wrenches . . . . . . . . . 362, 363 Socket Sets . . . . . . . . . . . . . 82, 83 Sockets & Accessories . . . . 97, 98 Wrenches . . . . . . . . . . . . 362, 363 Industrial Air Tools . . . . . . . . . 364, 366, 367 Hole Saw Kits . . . . . . . . . . . . . 226 Inflator Gauges . . . . . . . . . . . . . 396 Inspection Cameras . . . . . . . . . . . . . . . . . 245 Mirrors . . . . . . . . . . . . . . 245, 246 Scopes. . . . . . . . . . . . . . . . . . . 244 Instrument Cases. . . . . . . . . . . . . 27 Insulated Tools . . . . . . . . . . . . . . . . . . . . 308 Vests . . . . . . . . . . . . . . . . . . . . 340 Inverters . . . . . . . . . . . . . . . . . . . 255 Jackets . . . . . . . . . . . 345 - 347, 349 Cotton Duck . . . . . . . . . . . . . . 340 Insulated . . . . . . . . . . . . . . . . . 340 Rainwear. . . . . . . . . . . . . 337, 338 Traffic. . . . . . . . . . . . . . . 345 - 349 Welding . . . . . . . . . . . . . . . . . . 302 Workwear . . . . . . . . . . . . . . . . 340 Jacks Clutch . . . . . . . . . . . . . . . . . . . 272 Floor . . . . . . . . . . . . . . . 268 - 272 Forklift . . . . . . . . . . . . . . . . . . . 272 Hydraulic. . . . . . . . . . . . 268 - 272 Pallet . . . . . . . . . . . . . . . 286 - 288 Pneumatic. . . . . . . . . . . 270 - 273 Service. . . . . . . . . . . . . . 268 - 272 Stands . . . . . . . . . . 272, 274, 275 Transmission . . . . . . . . . 272, 273 Vehicle . . . . . . . . . 268 - 272, 277 Jaw Pullers . . . . . . . . . . . . . . . . . 266 Jobsite Boxes . . . . . . . . . . . . . 28, 44 Key Cabinets. . . . . . . . . . . . . . . . 324 Keys, Hex. . . . . . . . . . . . . . . . . . . 156 Knee Pads . . . . . . . . . . . . . . . . . . 333 Knives Blades . . . . . . . . . . . . . . . . . . . 184 Locking Blades . . . . . . . . . . . . 184 Utility. . . . . . . . . . . . . . . . 183, 184 Landscaping Carts . . . . . . . . . . . 291 Lanyards, Fall Arresting . . . . . . 360 Laser Tools . . . . . . . . . . . . . . . . . 243 Levels. . . . . . . . . . . . . . . . . . . . . . 244 Laser . . . . . . . . . . . . . . . . . . . . 243 Lever Chain Hoists . . . . . . . . . . . . . . 260 Stroke Pump . . . . . . . . . . . . . . 376 Lifting Cranes & Accessories. . . 275, 276 Tables . . . . . . . . . . . . . . . . . . . 290 Lifts, Service. . . . . . . . . . . . 278, 290 Load Binders . . . . . . . . . . . . . . . 265 Locking Pliers. . . . . . . . . . 174 - 176 Lockset Hole Saw Kits . . . . . . . 226 Lube Pumps . . . . . . . . . . . . . . . . 379 Lubricants Dispensers . . . . . . . . . . . . . . . 379 Pumps . . . . . . . . . . . . . . . . . . . 379 Lubrication Accessories . . . . . . . . . . . . . . . 379, 383 - 386 Lubricators, Airline . . . . . . . . . . . . 369, 370, 372, 373 Magnetic Bases . . . . . . . . . . . . . 235 Magnifiers. . . . . . . . . . . . . . . . . . 245 Lights . . . . . . . . . . . . . . . . . . . . 248 Manual Barrel Pumps . . . . . . . . . 376, 377 Chain Hoists . . . . . . . . . . . . . . 261 Measuring Wheel . . . . . . . . . . . 243

www.westwardtools.ca

Measuring Tools Angle Finder . . . . . . . . . . 237, 238 Dial Indicator, Magnetic Base . . . . . . . . . . . . . . . . . . . . . . 236 Gauges . . . . . . . . . . . . . . 215, 237 Sets . . . . . . . . . . . . . . . . . . . . . 233 Mechanics Creepers . . . . . . . . . . . . . . . . . 281 Gloves . . . . . . . . . . . . . . . . . . . 330 Metric Grease Fittings . . . 385, 386 Micrometers Depth. . . . . . . . . . . . . . . . . . . . 234 Digital . . . . . . . . . . . . . . . 232, 233 Outside . . . . . . . . . . . . . . 232, 233 MIG Welding Carts . . . . . . . . . . . . . 300 Welding Packages . . . . . 298, 299 Milling Machines . . . . . . . 296, 297 Mirrors, Telescoping . . . . . . . . . 246 Modular Workstations . . . . . . . . 42 Motor Stands . . . . . . . . . . . . . . . 276 Nitrile Gloves . . . . . . 329, 332, 333 Nozzles, Water . . . . . . . . . . . . . . 389 Nut Drivers & Sets. . . . . . . 150, 151 Nutsetters . . . . . . . . . . . . . . . . . . 145 O-Rings & Assortments . . . . . . 388 Oil Collection Equipment . . . . . . 377 Drains . . . . . . . . . . . . . . . . . . . 377 Extractor . . . . . . . . . . . . . . . . . 393 Filter Wrench. . . . . . . . . . . . . . 392 Cup Type . . . . . . . . . . . . . . 391 Open Drum Reels . . . . . . . . . . . 253 Open End Wrenches & Sets . . . 106 Padlocks . . . . . . . . . . . . . . . . . . . 324 Stainless Steel . . . . . . . . . . . . 324 Pallet Jacks . . . . . . . . . . . . . . . 286 - 288 Truck Stops . . . . . . . . . . . . . . . 289 Trucks . . . . . . . . . . . . . . . . . . . 288 Pants . . . . . . . . . . . . . . . . . . 348, 349 Rainwear. . . . . . . . . . . . . 337, 338 Traffic . . . . . . . . . . . . . . . 348, 349 Parts Cleaners . . . . . . . . . . . . . . . . . 294 Cleaning Brushes . . . . . . . . . . 389 Tray . . . . . . . . . . . . . . . . . . . . . 247 Pickup Tools, Magnetic . . 246, 247 Pin Type Jack Stands. . . . . . . . . 274 Pipe Cutters & Wheels . . . . . . . . . . 181 Wrenches. . . . . . . . . . . . . . . . . 122 Pitch Gauges . . . . . . . . . . . 215, 237 Plasma Cutting Machines . . . . . . . . . . 300 Torches & Consumables . . . . 300 Platform Trucks . . . . . . . . . . . . . 291 Pliers . . . . . . . . . . . . . . . . . . . . . . 165 Crimping . . . . . . . . . . . . . . . . . 160 Diagonal Cutting . . . . . 160, 162, 166, 172, 307 End Cutting . . . . . . . . . . 164, 166 Fence . . . . . . . . . . . . . . . . . . . . 164 Insulated . . 171 - 173, 306 - 308 Linesman. . . . 160, 164, 172, 306 Locking . . . . . . . . . . . . . 173 - 176 Long Nose . . 160, 163, 166, 167, . . . . . . . . . 171, 172, 306, 307 Needle Nose . . . . . 163, 165, 166 Sets . . . . . . . . 161, 165, 171, 306 Side Cutting . . . . . . . . . . . . . . 162 Slip Joint . . . . . . . . . . . . . . . . . 161 Snap Ring . . . . . . . . . . . . 167, 168 Tongue and Groove . . . . . . . . 162 Water Pump . . . . . . . . . . . . . . 173 Plumbers Hole Saws & Kits . . . 226 Pneumatic Drills . . . . . . . . . . . . . . . . . . . . 365 Grinders. . . . . . . . . . . . . . . . . . 364 Hammer . . . . . . . . . . . . . 366, 367 High Speed Cutters . . . . . . . . 364

Impact Wrenches . . . . . . . . . . 362 Ratchets . . . . . . . . . . . . . . . . . 363 Sanders . . . . . . . . . . . . . . . . . . 363 Scalers/Chippers . . . . . . 366, 367 Screwdrivers . . . . . . . . . . . . . . 365 Shears . . . . . . . . . . . . . . . . . . . 365 Polyurethane Coated Gloves . . 327 Poncho, Rainwear . . . . . . . . . . . 337 Portable Hydraulic Sets. . . . . . . . . . . . . 266 Task Lighting . . . . . . . . . 248, 249 Power Bars . . . . . . . . . . . . . . . . . . . . . 253 Inverters . . . . . . . . . . . . . . . . . 255 Power Tools Accessories . . . . . . . . . . . . . . . 145 Air Die Grinders. . . . . . . . . . . . 364 Drills . . . . . . . . . . . . . . . . . . 365 Grinders . . . . . . . . . . . . . . . 364 Hammer . . . . . . . . . . 366, 367 High Speed Cutters. . . . . . 364 Impact Wrenches . . . 362, 363 Nibblers . . . . . . . . . . . . . . . 365 Ratchets . . . . . . . . . . . . . . . 363 Sanders . . . . . . . . . . . . . . . 363 Scalers/Chippers. . . . 366, 367 Screwdrivers . . . . . . . . . . . 365 Shears. . . . . . . . . . . . . . . . . 365 Bench Grinders. . . . . . . . . . . . 295 Corded, Bench Grinders . . . . 295 Precision Measuring Tools Dial Indicator, Magnetic Base . . . . . . . . . . . . . . . . . . . . . . 236 Gauges . . . . . . . . . . . . . . 215, 237 Sets . . . . . . . . . . . . . . . . . . . . . 233 Presses, Hydraulic . . . . . . 279, 280 Pressure Washer Hose Reels. . 374 Protective Clothing . . . . . . . . . . . . . 302, 303 Eyewear . . . . . . . . . . . . 354 - 357 Protractors . . . . . . . . . . . . . 237, 238 Machinist . . . . . . . . . . . . 236, 237 Pry Bars. . . . . . . . . . . . . . . 198 - 200 Sets . . . . . . . . . . . . . . . . . . . . . 199 Pullers Battery Terminal . . . . . . . . . . . 392 Bearing . . . . . . . . . . . . . . . . . . 266 Cotter Pin . . . . . . . . . . . . . . . . 197 Gear . . . . . . . . . . . . . . . . . . . . . 266 Hydraulic . . . . . . . . . . . . . . . . . 266 Jaw. . . . . . . . . . . . . . . . . . . . . . 266 Pulley Wheel. . . . . . . . . . . . . . 394 Wire Rope & Chain . . . . 260, 263 Pumps Fuel . . . . . . . . . . . . . . . . . 376, 377 Grease & Gear Oil . . . . . . . . . 379 Hydraulic . . . . . . . . . . . . . . . . . 278 Industrial. . . . . . . . . . . . . 376, 377 Oil . . . . . . . . . . . . . . . . . . . . . . 379 Transfer . . . . . . . . . . . . . . 376, 377 Punches Alignment . . . . . . . . . . . . . . . . 193 Center . . . . . . . . . . . . . . . 192, 194 Drift . . . . . . . . . . . . . . . . . . . . . 194 Hollow. . . . . . . . . . . . . . . . . . . 195 Pin . . . . . . . . . . . . . . . . . . . . . . 193 Prick. . . . . . . . . . . . . . . . . . . . . 194 Roll Pin . . . . . . . . . . . . . . . . . . 194 Solid. . . . . . . . . . . . . . . . . . . . . 193 Punches & Chisels . . . . . . . . . . . 196 Holders . . . . . . . . . . . . . . . . . . 195 Sets . . . . . . . . . . . . . . . . . 191, 192 Putty Knives . . . . . . . . . . . . . . . . 184 PVC Electrical Tape . . . . . . . . . . 257 Rainwear. . . . . . . . . . . . . . . 337, 338 Flame Resistant . . . . . . . . . . . 338 Ramps Truck Service . . . . . . . . . . . . . . 278 Vehicle . . . . . . . . . . . . . . . . . . . 278 Ratcheting Wrenches & Sets . . . . . . . 107 - 110, 113, 115, 116

415

W414-10 - W416-10_productindex.qxp

2/9/10

11:15 AM

Page 416

INDEX Ratchets 1" Drive . . . . . . . . . . . . . . . . . . . 78 1/2" Drive . . . . . . . . . . . . . . . . . 67 1/4" Drive . . . . . . . . . . . . . . . . . 48 3/8" Drive . . . . . . . . . . . . . . . . . 55 Flex Head . . . . . . . . . . . . . . . . . 55 Reciprocating Saw Blades . . . . 224 Reels Air Hose . . . . . . . . . . . . . 374, 375 Electrical Cord. . . . . . . . . . . . . 253 Pressure Washer Hose. . . . . . 374 Water Hose. . . . . . . . . . . 374, 375 Welding Cable & Hose . . . . . . 301 Reflective Clothing . . . . . 342 - 344 Refractometer . . . . . . . . . . 245, 246 Regulators, Air Line . . . . 370 - 373 Repair Kit, Tire Valve. . . . . . . . . 397 Respirators, Disposable. . 358, 359 Reusable Earplugs . . . . . . 352, 353 Rivet Guns . . . . . . . . . . . . . . . . . . . . 388 Tools . . . . . . . . . . . . . . . . . . . . 388 Rotary Pumps . . . . . . . . . . 376, 377 Rules, Machinist . . . . . . . . . . . . 238 Safes . . . . . . . . . . . . . . . . . . 325, 326 Safety Caps & Hats . . . . . . . . . . . . . . 351 Eyewear . . . . . . . . . . . . 354 - 357 Tools . . . . . . . . . . . . . . . 308 - 323 Wand, LED. . . . . . . . . . . . . . . . 350 Sanders, Pneumatic . . . . . . . . . 363 Sanding Boards . . . . . . . . . . . . . 398 Saws Bandsaws . . . . . . . . . . . . 297, 298 Hole Saws & Kits . . . . . 225 - 228 Scrapers. . . . . . . . . . . . . . . . . . . . 196 Gasket . . . . . . . . . . . . . . . . . . . 196 Razor . . . . . . . . . . . . . . . . . . . . 184 Scratch Awls. . . . . . . . . . . . . . . . . 196, 197 Brushes . . . . . . . . . . . . . . . . . . 204 Screwdrivers . . 130 - 133, 135, 136, 140, 143 Bits & Sets. . . . . . . . . . . 144 - 149 Insulated. . . . . . . . . 137, 138, 307 Jewelers . . . . . . . . . . . . 140 - 143 Multi-Bit . . . . . . . . 138 - 140, 143 Pneumatic. . . . . . . . . . . . . . . . 365 Precision . . . . . . . . . . . . . . . . . 142 Sets132, 134, 137, 140 - 143, 307 Screw Extractors & Sets . . . . . . . . . . . . . . . . . . . . 228 - 230 Scribers . . . . . . . . . . . . . . . . . . . . 197 Scrubbers, Boot . . . . . . . . . . . . . 341 Self-Adhesive Tie Mounts . . . . 257 Service Carts . . . . . . . . . . . . . . . . . . . . 291 Jacks . . . . . . . . . . . . . . . 268 - 272 Lifts . . . . . . . . . . . . . . . . . 278, 290 Shears . . . . . . . . . . . . . . . . . 178, 179 Shelf Bins . . . . . . . . . . . . . . . . . . . 25 Shelving & Racking . . . . . . . . . . 291 Shields, Face. . . . . . . . . . . . . . . . 358 Shock Absorbing Lanyards . . . 360 Shop Coats . . . . . . . . . . . . . . . . . . . . 339 Presses . . . . . . . . . . . . . . 279, 280 Signal Lights . . . . . . . . . . . . . . . . 350 Signs Visual Warnings . . . . . . . . . . . 350 Wet Floor. . . . . . . . . . . . . . . . . 324 Sleeves, Welding . . . . . . . . . . . . 302 Slide Hammer Pullers & Sets . . . . . . . . . . . . . . . . . . . . . . . . . 394 Snow Fence . . . . . . . . . . . . . . . . 324 Socket Sets . . . . . . . . . . . . . . . . . . 14 1" Drive. . . . . . . . . . . . . . . . 78, 95 1/2" Drive . . . . . . 17, 19, 63 - 66, 85 - 87 1/4" Drive . . . . 14, 18, 46, 47, 49

416

3/4" Drive. . . . . . . . . . . 74, 75, 91 3/8" Drive . . . . . . 14, 51 - 57, 62, 82, 83 Hex Key. . . . . . . . . . . . . . . . 54, 55 Impact . . . 82, 83, 85 - 87, 91, 95 Metric . . . . . . . . . . 13, 14, 19, 55, . . . . . . . . . . . . . . 60, 86, 87, 91 Metrinch速 . . . . . . . . . . . . . . . . . 17 SAE . . . . . . . . . . . . 13, 14, 19, 60, . . . . . . . . . . . . . 85 - 87, 91, 95 Spark Plug . . . . . . . . . . . . . . . . . 62 Torks . . . . . . . . . . . . . . . . . . 61, 62 Universal Joint . . . . . . . 53, 66, 83 Sockets 1" Drive . . . . . . . 78 - 80, 95 - 98 1/2" Drive. . . . . . 68 - 73, 87 - 90 1/4" Drive . . . . . . . . . . . . . . 49, 50 3/4" Drive . . . . . . 75 - 77, 92 - 94 3/8" Drive . . . . . 58 - 62, 83 - 85 Adapters . . . . . . . . 48, 57, 68, 76, . . . . . . . . . . . 79, 83, 87, 93, 95 Attachments. . . . . 48, 55 - 57, 67, . . . . . . . . . . 68, 75, 76, 78, 79, . . . . . . . . . . 83, 92, 93, 95, 96 Crowfoot . . . . . . . . . . . . . . . . . . 62 Extensions . . . . 48, 56, 57, 67, 68, . . . . . . . 75, 79, 83, 87, 92, 96 Flex Handles . . 48, 55, 67, 75, 79 Hex Bits. . . . . . . . . . . . . . . . 55, 66 Hex Key . . . . . . . . . 60, 61, 72, 73 Holders . . . . . . . . . . . . . . . . . . . 26 Impact . . . . . . . . 83 - 85, 87 - 90, . . . . . . . . . . . . . . . . . . . 92 - 98 Metric. . . . . . . . . . 61, 69 - 71, 89, . . . . . . . . . . . . . . . . . 90, 94, 97 Sets. . . . . . . . . . . . 46, 47, 51 - 53, . . . . . . 56, 63 - 66, 74, 75, 78 Spark Plug . . . . . . . . . . . . . . . . . 62 Speeder Handles . . . . . . . . 56, 67 T-Handles. . . . . 48, 56, 67, 75, 79 Tork Bits. . . . . . . . . . . . . . . . 47, 66 Torks Set . . . . . . . . . . . . . . . . . . 50 Universal . . . . . . . . . . . . . . . 60, 73 Universal Joint . . . . . . . 76, 79, 87 Universal Joints . . . . . . 48, 57, 68, . . . . . . . . . . . . . . . . . 85, 93, 95 Soldering. . . . . . . . . . . . . . . . . . . 304 Guns & Irons. . . . . . . . . . . . . . 304 Solvent Tanks . . . . . . . . . . . . . . . 294 Spectacles. . . . . . . . . . . . . 354 - 356 Squares Carpenter/Rafter . . . . . . . . . . 238 Combination. . . . . . . . . . . . . . 238 Machinist. . . . . . . . . . . . . . . . . 236 Stainless Steel Tools . . . . . . . . . . 21 Stands Motor. . . . . . . . . . . . . . . . . . . . 276 Vehicle . . . . . . . . . . 272, 274, 275 Step Drill Bits . . . . . . . . . . . . . . . 222 Stethoscopes, Mechanic's . . . . 247 Storage Boxes & Containers . . . 25 Straps, Tie-Down . . . . . . . . . . . . 264 String Lights . . . . . . . . . . . . . . . . 249 Stubby Wrenches. . . . . . . . . . . . 105 Stud Remover Sets . . . . . . . . . . 230 Suction Guns . . . . . . . . . . . . . . . 378 Surveyors Vests . . . . . . . . . . . . . 344 Synthetic Gloves . . . . . . . . 327, 329 T-Shirts, Traffic . . . . . . . . . . . . . . 344 Tables. . . . . . . . . . . . . . . . . . . . . . 292 Tap & Die Sets . . . . . . . . . 211 - 214 Tap Wrenches . . . . . . . . . . . . . . . 214 Tape Colour Coding Electrical . . . . 257 Measures . . . . . . . . . . . 240 - 243 Strapping. . . . . . . . . . . . . . . . . 389 Vinyl Electrical. . . . . . . . . . . . . 257 Taps Maintenance. . . . . . . . . 216 - 220 Pipe . . . . . . . . . . . . . . . . . . . . . 215 Tarpaulins . . . . . . . . . . . . . . . . . . 293 Task Lighting . . . . . . . . . . 248 - 250

Telescopic Jacks . . . . . . . . . . . . . 273 Telescoping Gauges . . . . . . . . . . . . . . . . . . 234 Utility Lights . . . . . . . . . . . . . . 248 Temporary Jobsite Lighting . . . . . . . . . . . . . . . . . . . . 248, 249 Terminals Kits. . . . . . . . . . . . . . . . . . . . . . 169 Wire . . . . . . . . . . . . . . . . . . . . . 169 Test Light. . . . . . . . . . . . . . . . . . . 391 Testers Antifreeze . . . . . . . . . . . . . . . . 390 Battery . . . . . . . . . . . . . . . . . . . 390 Circuit . . . . . . . . . . . . . . . . . . . 391 Tie Rod Separator . . . . . . . . . . . 394 Tie-Down Straps . . . . . . . . 264, 265 Tin Snips . . . . . . . . . . . . . . . 176, 177 Tire Gauges . . . . . . . . . . . . . . 395, 396 Tools . . . . . . . . . . . . . . . . . . . . 125 Tread Depth Gauge . . . . . . . . 397 Valve Repair Tool . . . . . . . . . . 397 Titanium Hand Tools . . . . 322, 323 Tools Bags & Buckets. . . . . . . . . 23 - 25 Boxes . . . . . . . . . . . . . . . . . . 27, 43 Boxes & Accessories . . 26, 28, 44 Boxes & Chests . . 27 - 40, 43, 44 Chests & Cabinets . . . . 29, 30, 41 Holders . . . . . . . . . . . . . . . . . . . 25 Kits . . . . . . . . . 4, 8, 12, 13, 19, 20 Automotive . . . . . . . . . . 15, 16 Intermediate . . . . . . . . . . . . 11 Master. . . . . . . . . . . . . . . . . 6, 7 Metrinch速 . . . . . . . . . . . . . . . 16 Professional . . . . . . . . . . . . . . 9 Starter . . . . . . . . . . . . 9, 13, 14 Utility. . . . . . . . . . . . . . . . . . . 10 Non-Sparking . . . . . . . . 308 - 321 Pouches. . . . . . . . . . . . . . . 23 - 25 Rivet. . . . . . . . . . . . . . . . . . . . . 388 Safety . . . . . . . . . . . . . . . 320, 321 Sets . . . . . . . . . . . . . . . . . . 14 - 16 Stainless Steel. . . . . . . . . . . . . . 21 Storage . . . . . . . . . . . . . . . . 25, 26 Torks Bits & Sets . . . . . . . . . . 50, 61, 62 Sockets . . . . . . . . . . . . . . . . . . . 47 Torque Limiting Sockets . . . . . . 125 Torque Multipliers & Wrenches . . . . . . . . . . . . . . . . . . . . 125 - 128 Traffic Bib Pants. . . . . . . . . . . . . . . . . 346 Coats . . . . . . . . . . . . . . . . . . . . 347 Cones . . . . . . . . . . . . . . . . . . . 350 Control . . . . . . . . . . . . . . . . . . 350 Coveralls . . . . . . . . . . . . . . . . . 345 Harness . . . . . . . . . . . . . . . . . . 344 Hoodies. . . . . . . . . . . . . . . . . . 346 Jackets. . . . . . . . . . . . . . 345 - 349 Pants . . . . . . . . . . . . . . . . 348, 349 Safety Wand . . . . . . . . . . . . . . 350 T-Shirts . . . . . . . . . . . . . . . . . . 344 Vests . . . . . . . . . . . . . . . 342 - 344 Transfer Pumps . . . . . . . . . . . . . 376 Transmission Jacks . . . . . . 272, 273 Trolleys . . . . . . . . . . . . . . . . . . . . 262 Trouble Lamps . . . . . . . . . . . . . . 250 Truck Ramps . . . . . . . . . . . . . . . . 278 Trucks, Pallet . . . . . . . . . . . 287, 288 Tubing Benders . . . . . . . . . . . . . . . . . . 182 Cutter Wheels . . . . . . . . . . . . . 180 Cutters . . . . . . . . . . . . . . 180, 182 Tune-Up Equipment . . . . . . . . . 391 Umbrellas . . . . . . . . . . . . . . . . . . 341 Utility Carts . . . . . . . . . . . . 283, 290, 291 Lights . . . . . . . . . . . . . . . 248, 249 Trucks . . . . . . . . . . . 282, 283, 290

Vehicle Jacks . . . . . . . . . . . . . . . 268 - 272 Lifts . . . . . . . . . . . . . . . . . . . . . 278 Ramps . . . . . . . . . . . . . . . . . . . 278 Stands . . . . . . . . . . . . . . . . . . . 274 Vernier Calipers . . . . . . . . . . . . . 232 Vests. . . . . . . . . . . . . . . . . . . . . . . 340 Cotton Duck . . . . . . . . . . . . . . 340 Insulated . . . . . . . . . . . . . . . . . 340 Surveyors. . . . . . . . . . . . . . . . . 344 Traffic. . . . . . . . . . . . . . . 342 - 344 Vinyl Tape, Electrical . . . . . . . . . 257 Vises Bench . . . . . . . . . . . . . . . . . . . 202 Drill Press . . . . . . . . . . . . . . . . 202 Visors, Replacement . . . . . . . . . 357 Visual Warnings . . . . . . . . . . . . . 350 Warning Tapes . . . . . . . . . . . . . . 350 Water Hose Reels . . . . . . . . . . . 374, 375 Nozzles . . . . . . . . . . . . . . . . . . 389 Welders, MIG. . . . . . . . . . . 298, 299 Welding Aprons . . . . . . . . . . . . . . 302, 303 Cable & Hose Reels . . . . . . . . 301 Carts . . . . . . . . . . . . . . . . . . . . 300 Helmets . . . . . . . . . . . . . . . . . . 301 Accessories. . . . . . . . . . . . . 301 Parts . . . . . . . . . . . . . . . . . . 301 Jackets . . . . . . . . . . . . . . . . . . . 302 MIG, Welding Packages . . . . . 299 Plasma Cutting Machines . . . 300 Sleeves . . . . . . . . . . . . . . . . . . 302 Wet Floor Signs . . . . . . . . . . . . . 324 Wheel Dollies . . . . . . . . . . . . . . . . . . . 277 Wrenches. . . . . . . . . . . . . . . . . 125 Whip Hoses, Grease . . . . . . . . . 384 Winter Gloves . . . . . . . . . . 328, 332 Wire Crimpers . . . . . . . . . . . . . 170, 171 Rope, Pullers . . . . . . . . . . . . . 263 Strippers . . . . . . . . . . . . 169 - 171 Terminals. . . . . . . . . . . . . . . . . 169 Wheel Brushes . . . . . . . . . . . . 204 Work Lights . . . . . . . . . . . . 248, 249 Workbenches . . . . . . . . . . . . 40 - 42 Workwear Bib Overalls . . . . . . . . . . . . . . 340 Jackets . . . . . . . . . . . . . . . . . . . 340 Wrenches. . . . . . . . . . . . . . . . . . . 122 Adjustable . . . . . . 120 - 122, 124 Combination. . . . . . . . . 100 - 106 Crowfoot. . . . . . . . . . . . . . . 54, 62 Flare Nut . . . . . . . . . . . . . 117, 118 Flex Head . . . . . . . . . . . . . . . . 114 Holders . . . . . . . . . . . . . . . . . . . 25 Impact . . . . . . . . . . . . . . . . . . . 362 Metrinch速 . . . . . . . . . . . . . . . . . 17 Oil Filter . . . . . . . . . . . . . 391, 392 Open End . . . . . . . . . . . . . . . . 106 Pipe . . . . . . . . . . . . . . . . 122 - 124 Ratcheting . . 107 - 113, 115 - 117 Ratcheting Box End . . . . . . . . . . . . . . 112, 116, 117 Sets . . . . . . . . . . . . . . . . . . . . . . 20 Combination . . . . . . 100 - 102 Flex Ratcheting . . . . . . . . . 114 Open End. . . . . . . . . . . . . . 106 Ratcheting . . . . . . . . 107 - 110 Stubby . . . . . . . . . . . . . . . . 105 Strap . . . . . . . . . . . . . . . . . . . . 124 Torque . . . . . . . . . . . . . . 125 - 128 Torque Limiting. . . . . . . . . . . . 125 Wheel . . . . . . . . . . . . . . . . . . . 397

www.westwardtools.ca

WarrantyPolicy2010-english.qxp

2/12/10

11:17 AM

Page 1

Warranty Policy Westward Warranty Policy. The warranty and return policy for all products identified as Westward or any other brand set out in the Westward catalogue wherever such product is advertised, promoted or sold (“Products”) is as set out below. Such warranty supercedes any and all manufacturers’ warranties, written or implied. Westward’s sole obligation shall be to repair or replace any Products that are defective in materials and/or workmanship discovered, and for which a warranty claim is made during the applicable warranty period, and no claims for damages of any type will be allowed. All Products are sold on this specific understanding. Warranties only apply when the Product is used for the purpose for which it was designed, in normal operating and other conditions. Defective warranted Products will be repaired or replaced at no cost with a new or reconditioned Product at the discretion of Westward. This warranty is void if there is evidence of misuse, abuse or alteration or if the Product is worn out from normal use. Warranted Products that have been discontinued will be replaced with similar available Products, or an appropriate credit will be issued. The specific warranty coverage for each Product is as set out in the then-current Westward price list. Westward sells only in Canada solely on a wholesale basis and accordingly warranties only apply to purchasers (“Customers”) for resale or for use in their business in Canada. Lifetime Replacement Warranty. Applies to all Products classified in Westward’s then-current price list with the letters “LW”. Westward will replace such defective Products when presented to Westward during their reasonably expected usable life. Examples of some of the Products to which the Lifetime Replacement Warranty applies currently include: Wrenches* Hammers* Hex Keys Screwdrivers & Nut Drivers* Pliers Punches & Chisels Sockets & Attachments** * Broken handles, bent shafts, snipe or hammer marks void warranty ** Rounded drive corners indicate abuse voiding warranty

Limited Repairable Warranty. Applies to Products classified in Westward’s then-current price list with the letters “LR”. Westward will repair such defective Products when presented to Westward during their reasonably expected usable life. If, at Westward’s discretion, a Product is not repairable, Westward will replace such Product. Examples of some of the Products to which the Limited Repairable Warranty applies currently include: C-Clamps Vises* Flex Bars* Ratchets* Pipe Wrenches* * Broken handles, bent shafts, snipe or hammer marks void warranty. One-Year, Two-Year and Three-Year Repairable Warranties. Applies to all Products classified in Westward’s then-current price list with the letters “1Y”, “2Y”, or “3Y” when presented to Westward within 1, 2, or 3 years respectively from the invoice date of the original purchase. Westward will repair defective Products and will replace them if, at Westward’s discretion, the Products are not repairable. Examples of some of the Products to which the One-Year Repairable Warranty applies currently include: Air Tools Bench Grinders Chain Pullers Drill Presses Cable Pullers Service Jacks Band Saws Shop Equipment Tool Storage Examples of some of the Products to which the Two-Year Repairable Warranty applies currently include: Torque Wrenches (90 days on Calibration) Hand Pallet Trucks Hose Reels (6 months on Hoses) Platform Carts Examples of some of the Products to which the Three-Year Repairable Warranty applies currently include: Plasma Cutters MIG/Stick Welders

30 Day, One & Two Year Replacement Warranties. Applies to all Products classified in Westward’s then-current price list with the letters “30R”, “1R” or “2R” when presented to Westward within 30 days and 1 or 2 years respectively from the invoice date of the original purchase. Westward will replace defective Products.

No Guarantee. No warranty coverage is applicable to Products which by their nature are subject to abuse. Such Products are classified in Westward's then-current price list with the letters “NW”. Examples of some of the No Guarantee Products currently include: Electrical tape Increasing/Reducing Adapters Disposable Clothing Disposable Gloves Barricade Tape

Examples of some of the Products with two years: Harnesses & Lanyards

For Products not designated with a warranty classification, please contact your Westward sales representative to obtain the information.

Examples of some of the Products with one year: Wire Brushes Electrical Cords Welding Helmets Hard Hats Examples of some of the Products with 30 days: Reusable Gloves Coveralls & Duck Clothing Traffic Cones Rainwear Taps & Dies Disposable Masks Cable Ties

Warranty Disclaimer. Westward has made a diligent effort to illustrate and describe the Products accurately; however, any illustrations and descriptions are for the sole purpose of identification, and do not express or imply a warranty or condition that the Products are merchantable, or fit for a particular purpose or that the Products will necessarily conform to the illustrations or descriptions. The Products are sold to Customers on an “as is, where is” basis, and no warranty or condition or affirmation of fact, express or implied, other than as set forth in these Terms of Sales, is made or authorized by Westward. Any and all representations and warranties express or implied, legal, statutory, conventional or otherwise with respect to the Products (including implied warranties as to merchantability or fitness for a particular purpose) whether pursuant to the Sale of Goods Act of any province or otherwise are hereby expressly excluded and disclaimed.

Butane Torches Safety Glasses Traffic Vests Ear Plugs & Muffs Drill Bits

Sales & Freight Terms Terms. By placing an order, Buyers accept and agree to Westward’s terms and conditions, including the limited warranty, which are subject to change from time to time without prior notice. The current terms and conditions, including the limited warranty, can be obtained at www.westwardtools.ca. Limitation of Liability. Any liability of indirect consequential or incidental damages is expressly disclaimed by Westward. Westward's liability in all events for all damages, losses and causes of action (whether in contract, tort or otherwise) shall be limited in the aggregate to and shall not exceed the purchase price paid for the Products in question. Prompt Disposition. Westward will make a good faith effort for prompt correction or other adjustment with respect to any Product which proves to be defective within the warranty period as set out above. Please contact the location from which the Product was purchased before returning any Product, giving data and number of original invoice and describing the defect. Westward will give instruction as to the method of returning the Product. Product Suitability. Many provinces and locations have laws, codes and regulations governing sales, construction, installation, and/or use of products for certain purposes, which may vary from those in neighboring areas. While Westward attempts to ensure that its Products comply with such codes, it cannot guarantee compliance and cannot be responsible for how Products are installed or used. Before purchase and use of a Product, please review the Product, and applicable national, provincial and local laws, codes and regulations and be sure that the Product as well as its installation and use complies with them. Product Availability. Products are subject to availability at time of order. Certain Products may be discontinued from time to time. Pricing on such discontinued Products will be based on those prices listed in the last price issued by Westward containing such Products. Cross-Reference Information. Product cross-reference comparisons do not imply that all products compared are available or in the case of functional equivalency, that past performance and other characteristics are comparable. For critical applications, review specifications prior to purchase. Sales Policy. Prices are listed in Canadian currency, subject to change without notice. Quotations on large quantities are available on request. Contact your Westward sales representative for further information. Sales Tax. Westward is required to charge goods and services tax and applicable provincial sales tax on items for which a sales tax exemption certification has not been provided. When ordering please provide any valid exemption certificate. Credit Balance. Customer agrees that any credit balance issued will be applied within one (1) year of its issuance. If not applied or requested within one (1) year, any balance remaining will be subject to cancellation, and Westward shall have no further liability. Payment Terms. For Customers with established credit terms are net thirty (30) days from date of shipment. If credit is not established, please include payment with order or purchase through Visa, MasterCard or American Express. All payments must be in Canadian dollars. Westward shall have the right to set-off and deduct for any sums owed. If Customers fail to make payment within thirty (30) days, Westward may defer further shipments until such payment is made, or may, at its option, cancel all or any part of unshipped order. Interest will be charged on overdue accounts at 2% per month (26.82% per annum). Special Orders. Some special order items as indicated in the catalogue may require additional shipping time. Customers will be notified at time of order.

Order for Export by Customer. Westward's policy is to offer Products only for delivery, use and resale within Canada. Customer shall immediately notify Westward in writing if any order for Product is intended for export from Canada. Westward has discretion as to whether to accept or reject such orders. In any event, Customer acknowledges that Westward is prevented under contract from selling Products for delivery in the United States, Mexico, the Caribbean, Panama, the Persian Gulf region, the Peoples Republic of China, the United Arab Emirates, Saudi Arabia, India or Japan. Customer represents that it shall not export Products purchased from Westward to such countries. Where Products purchased from Westward are to be exported, Customer assumes sole responsibility for arranging the export of the Products from Canada and their importation into other countries, and shall at all times comply with all applicable laws in relation thereto, including but not limited to export control laws, rules and regulations of Canada. Westward will not be the exporter under any circumstances. Customer shall not export Product purchased from Westward without first obtaining all necessary written consents, permits and authorizations and completing such formalities as may be required by any such laws, rules and regulations. Customer further represents and warrants that it will not export or divert Products to any country or to any person to which or to whom export from Canada is prohibited under applicable laws, rules and regulations. Force Majeure. Westward shall not be liable for any damage, cost or loss of profit of its Customers or any delay or failure in delivery or for any failure to perform caused by a force beyond Westward's control, including, but not limited to an act of God, action or failure to act of any government or governmental board, commission, department, bureau or authority, confiscation, war, blockade, insurrection, invasion, quarantine restrictions, riot, sabotage, acts of the public enemy, flood, fire, explosion, epidemic, landslide, lightning, earthquake, storm, accident, strike, lockout, work slowdown, work stoppage, differences with workers, embargo, power failure or shortage and any delay or failure (other than a delay or failure caused by the negligence or deliberate act or inaction of Westward) of supplies, equipment, labour or transportation. Freight Policy. Westward will arrange for freight to destination in Canada only. Shipping charges apply to all orders. Title and Risk of Loss. Title and risk of loss in the Products pass to Customer at time of shipment from Westward. If Product is damaged in transit, Customer must file a claim with the carrier. If Products are undeliverable for two days, carrier will return them to Westward and additional charges may apply. Return Policy. Any Product cancellation or return must be approved by Westward in its sole discretion, be accompanied by proof of purchase, and may be subject to restocking and other charges. Any returns due to shipping errors, damage during shipping, or loss during shipping must be reported to Westward immediately. For returns not related to damage or loss during shipping, Product(s) must be returned within 30 days of shipment and be in original package and resaleable condition. Westward will only accept returns on Products shown in its catalogue (unless for damage during shipping). Some exceptions may apply. General. Customer shall not assign any order or any interest therein without the written consent of Westward, and any such actual or attempted assignment shall entitle Westward to cancel such order upon notice to Customer. No addition to or modification of terms and conditions shall be binding on Westward unless agreed to by Westward in writing, and Westward’s acceptance of any order shall not be construed as assent to any additional terms and conditions. Westward is a division of Acklands-Grainger Inc. and all references to Westward shall include Acklands-Grainger Inc.

2/12/10

3:57 PM

Page 1

Check out over 450 new Condor safety products inside.

WCAT2010E

2010WestwardCatalogueCover_EN.qxp