2009 New Products 速
table
16 Aqua Cil table
20 Aqua Ell table
42 Itis table
56 Monroe table
39 One Line LED, FLU table
57 Soffione 36-45 table
floor
58 Soffione 36-45 stem table
36 Talak LED, FLU clamp
36 Talak LED, FLU table
40 Tizio classic LED table
44 Tolomeo classic LED table
46 Tolomeo micro in colors table
17 Aqua Cil floor
21 Aqua Ell floor
52 Cabildo floor
59 Soffione floor
37 Talak LED, FLU floor
41 Tizio classic LED floor
44 Tolomeo classic LED floor
64 Alicudi ceiling
18 Aqua Cil ceiling
53 Cabildo wall
12 Droplet ceiling
12 Droplet mini ceiling/wall
wall/ceiling
47 Tolomeo with shade reading floor
68 Eurialo wall
77 Kalifa wall
79 Kanji wall
32 Kao wall
26 Logico ceilings
8 Mercury ceiling
74 Nur ceilings
70 Pipe wall/ceiling
14 Skydro ceiling
60 Soffione 36-45 wall/ceiling
78 Square wall
38 Talak LED, FLU wall
45 Tolomeo classic LED wall
49 Tolomeo 7-10-12 wall shade
suspension
65 Zeffiro 80-140 wall
19 Aqua Cil suspension
22 Aqua Ell suspension
54 Cabildo suspension
69 Choose suspension, mega suspension
13 Droplet suspension
66 Noto suspension
72 Nur Gloss/mini Gloss suspension
76 Infini suspension
32 Kao suspension
27 Logico suspensions
6 Mercury suspension
9 Mercury Cluster suspension/ceiling
75 Nur 1618 HAL/FLU suspension
62 Pirce suspension
61 Soffione 36-45 suspension
67 Tian Xia 2 RGB suspension
48 Tolomeo mega suspension
速
table
82 Ariel AC large table
83 Bolo classic AC table
84 Bolo linen table
85 Bolo linen AC table
86 Dome 14 table
86 Dome 14 AC table
floor
88 Illusa small/large table
88 Illusa AC large table
90 Jupe classic AC large table
91 Jupe linen table
91 Jupe linen AC table
92 Bolo linen floor
100 Dupla FLU ceiling
108 Jetz wall
107 Jupe 8-11 classic ceiling
109 Tejido 6 oval wall
96 Brick wall
97 Crescent half wall
97 Crescent full wall
98 Dupla FLU wall
wall/ceiling
93 Dome 14 floor
94 Jupe linen floor
wall/ceiling ADA
109 Tejido 6 round wall
95 Bliss 13-26-38-50 wall/ceiling
strip lights & mirrors
102 Illusa wedge wall
103 Illusa square 18 ceiling/wall
104 Plat 17-22 ceiling/wall
106 Solana recessed ceiling/wall
106 Solana surface ceiling/wall
112 2 Square 62-96.5 suspension
113 2.5 Square 49-61-95 suspension
110 Disk 12-18 suspension
111 2.5 Square strip 26-37-49 wall
suspension
101 Illusa strip 12 wall
118 Equilateral suspension
114 Peak suspension
速
outdoor
116 Rala suspension
118 Scalene suspension
120 Dupla outdoor FLU wall/ceiling
122 Lyra outdoor 11/14 wall/ceiling
eco
design
Artemide’s design and research team focuses on developing quality and long-lasting products. Utilization of recyclable materials is high priority in our process of conceiving new design. 80% of our lights are energy efficient fluorescent or LED lighting. But what’s more green than having a beautifully crafted light that continues to function well and looks stunning decades from now?
Ross Lovegrove Collection “What nature does is, it drills holes in things, it liberates form, it takes away anything extraneous. That’s what I do. I make organic things which are essential.” -Ross Lovegrove
Mercury suspension Ross Lovegrove 2008
“A ceiling fixture that places a floating assembly of large pebbles below a simple modern aluminum disc. These in turn reflect each other, bouncing light between their taught bio-morphic surfaces and reflecting the environment around them. During the day, the piece acts as a sculptural object reflecting the dynamics of natural light and movement of people around them.” - Ross Lovegrove
max 78 3/4” max 200 cm 21 11/16” 55 cm
Cable suspended luminaire for indirect halogen lighting. reflective units (pebbles) made of molded thermoplastic with polished chrome finish • reflective units (pebbles) containing light source in die-cast aluminum polished chrome finish • disc in die-cast aluminum in pale grey finish • grey thermoplastic canopy with clear electrical cord and stainless steel cables • mounting directly to rigid ceiling surface (hardware by others) over standard electrical junction boxes •
ø 43 5/16” ø 110 cm
Mercury suspension halogen source • 2 x 200W (R7S/T3) supplied.............
6
Mercury ceiling Ross Lovegrove 2008
1 15/16” 5 cm 21 11/16” 55 cm
“A ceiling fixture that places a floating assembly of large pebbles below a simple modern aluminum disc. These in turn reflect each other, bouncing light between their taught bio-morphic surfaces and reflecting the environment around them. During the day, the piece acts as a sculptural object reflecting the dynamics of natural light and movement of people around them.” - Ross Lovegrove
ø 43 5/16” ø 110 cm
Ceiling mounted luminaire for indirect halogen lighting. Mercury ceiling
reflective units (pebbles) made of molded thermoplastic with polished chrome finish • reflective units (pebbles) containing light source in die-cast aluminum polished chrome finish • disc in die-cast aluminum in pale grey finish with clear electrical cords and stainless steel cable • mounting directly to rigid ceiling surface (hardware by others) over standard electrical junction boxes •
8
halogen source • 2 x 200W (R7S/T3) supplied.............
Mercury Cluster Ross Lovegrove 2009
“A ceiling fixture that places a floating assembly of large pebbles below a simple modern aluminum disc. These in turn reflect each other, bouncing light between their taught bio-morphic surfaces and reflecting the environment around them. During the day, the piece acts as a sculptural object reflecting the dynamics of natural light and movement of people around them.” - Ross Lovegrove Cable suspended or ceiling mounted luminaire for indirect halogen lighting. Custom configurations available. reflective units (pebbles) made of molded thermoplastic with polished chrome finish • reflective units (pebbles) containing light source in die-cast aluminum polished chrome finish • disc in die-cast aluminum in pale grey finish • grey thermoplastic canopy with clear electrical cord and stainless steel cables • mounting directly to rigid ceiling surface (hardware by others) over standard electrical junction boxes •
13 large pebbles 16 15/16” x 6 1/4” 43 x 15.8 cm 94 1/2” 240 cm 21 medium pebbles 11” x 4 3/4” 27.8 x 12.1 cm 21 11/16” 55 cm 41 small pebbles 8 3/8” x 3 11/16” 21.2 x 9.3 cm 31 1/2” 80 cm 5 lighting pebbles 7 5/16” x 4 1/2” 18.6 x 11.5 cm
Mercury Cluster suspension halogen source • 5 x 200W (R7S/T3) supplied.............
9
10
Mercury Special Projects Please contact your Area Sales Manager or Sales Representative for more information on the countless ways the Mercury can be configured. The Artemide Engineering Team can provide you with detailed drawings.
11
Droplet ceiling Droplet mini ceiling/wall
2” 5 cm
12 5/8” 32 cm
2” 5 cm
13 3/8” 34 cm
Ross Lovegrove 2009
“Droplet is a ceiling light that appears as a pool of liquid aluminum reflecting three light pebbles. It has been generated totally by digital means and freezes in time the act of ripples that cross each other to define reflective zones and acts as a form of liquid dichroic.” - Ross Lovegrove Ceiling or wall (mini only) mounted luminaires for indirect halogen lighting. reflective units (pebbles) and stem in die-cast aluminum polished chrome finish • disc in die-cast aluminum in glossy grey finish • mounting directly to rigid ceiling surface (hardware by others) over standard electrical junction boxes •
ceiling
12
ø 23 5/8” ø 60 cm
ø 43 1/4” ø 110 cm
Droplet ceiling
Droplet mini ceiling/wall
halogen source • 3 x 200W (R7S/T3) supplied.............
halogen source • 1 x 200W (R7S/T3) supplied.............
mini ceiling/wall
Droplet suspension Ross Lovegrove 2008
“Droplet is a ceiling light that appears as a pool of liquid aluminum reflecting three light pebbles. It has been generated totally by digital means and freezes in time the act of ripples that cross each other to define reflective zones and acts as a form of liquid dichroic.” - Ross Lovegrove
2” 5 cm
max 78 3/4” max 200 cm
12 5/8” 32 cm
Cable suspended luminaire for indirect halogen lighting. reflective units (pebbles) and stem in die-cast aluminum polished chrome finish • disc in die-cast aluminum in glossy grey finish • grey thermoplastic canopy with clear electrical cord and stainless steel cables • mounting to standard electrical junction boxes •
ø 43 1/4” ø 110 cm
Droplet suspension halogen source • 3 x 200W (R7S/T3) supplied.............
13
Skydro ceiling A series of pebbles forms a bright sky reflecting the light that bounces on its biomorphic surfaces.
56 1/8” 142.5 cm
56 1/8” 142.5 cm
Ross Lovegrove 2009
53 1/2” 135.8 cm
53 1/2” 135.8 cm
Ceiling mounted luminaire for indirect halogen lighting. reflective units (pebbles) made of molded thermoplastic with polished chrome finish • available in two versions: electrified: indirect light comes from lighting unit integrated in luminaire non-electrified: indirect light comes from other light source that is separate from luminaire • die-cast aluminum reflector • single modules can be grouped together to form various configurations • optional multi-module installation kit • mounting to standard electrical junction boxes and with provision for additional concealed ceiling fastening •
14
16 5/8” 42.2 cm
Skydro ceiling (electrified) halogen source • 1 x 200W (R7S/T3)...........................
5 3/8” 13.6 cm
Skydro ceiling (non-electrified)
electrified
non-electrified
Aqua Cil table Ross Lovegrove 2008
7 1/16” 18 cm
Table standing luminaire for direct and indirect incandescent or halogen lighting.
14 9/16” 37 cm
7 1/8” 18 cm
diffuser in mirror-treated aluminum available in polished chrome, polished metallic orange, or polished metallic blue • base and structure in die-cast aluminum, stem in steel, satin chrome finish • touch dimmer on body •
ø 12 5/8” ø 32 cm
Aqua Cil table incandescent source • 1 x 150W (E26/A21)................................. or halogen source • 1 x 150W (E26/T10)..................................
polished metallic blue
polished metallic orange
polished chrome
16
Aqua Cil floor Ross Lovegrove 2008
7 1/16” 18 cm
Floor standing luminaire for direct and indirect halogen lighting. diffuser in mirror-treated aluminum available in polished chrome, polished metallic orange, or polished metallic blue • base in die-cast aluminum with satin chrome steel stem • touch dimmer on body •
63” 160 cm
9 7/16” 24 cm
ø 12 5/8” ø 32 cm
Aqua Cil floor halogen source • 1 x 250W (E26/T10 dbl. env.)....................
polished metallic blue
polished metallic orange
polished chrome 17
Aqua Cil ceiling ø 4 5/16” ø 11 cm
Ross Lovegrove 2009
Ceiling mounted luminaire for direct and indirect halogen lighting.
9 7/16” 24 cm
7 1/8” 18 cm
diffuser in mirror-treated aluminum available in polished chrome, polished metallic orange, or polished metallic blue • lamp shielded by injection-molded thermoplastic diffuser • mounting to standard electrical junction boxes •
ø 12 5/8” ø 32 cm
Aqua Cil ceiling halogen source • 1 x 150W (E26/T10 dbl. env.)....................
polished metallic blue
polished metallic orange
polished chrome
18
Aqua Cil suspension Ross Lovegrove 2008
Cable suspended luminaire for direct and indirect incandescent or halogen lighting.
ø 4 5/16” ø 11 cm 2 3/4” 7 cm
diffuser in mirror-treated aluminum available in polished chrome, polished metallic orange, or polished metallic blue • grey thermoplastic canopy with clear electrical cord and stainless steel cable • mounting to standard electrical junction boxes •
max 59 1/16” max 150 cm
7 1/16” 18 cm
ø 12 5/8” ø 32 cm
Aqua Cil suspension incandescent source • 1 x 150W (E26/G40)................................. or halogen source • 1 x 150W (E26/T10)..................................
polished metallic blue
polished metallic orange
polished chrome 19
Aqua Ell table Ross Lovegrove 2009
7 1/16” 18 cm
Table standing luminaire for direct and diffused halogen lighting.
14 9/16” 37 cm
7 1/8” 18 cm
hydroformed diffuser in mirror-treated aluminum in polished chrome • base and structure in die-cast aluminum, stem in steel, satin chrome finish • touch dimmer on body •
ø 14 3/16” ø 36 cm
ø 5 1/2” ø 14 cm
Aqua Ell table halogen source • 1 x 150W (E26/T10)..................................
20
Aqua Ell floor Ross Lovegrove 2009
7 1/16” 18 cm
Floor standing luminaire for direct and indirect halogen lighting. hydroformed diffuser in mirror-treated aluminum available in polished chrome • base and stem in die-cast aluminum with satin chrome finish, inner stem in steel • touch dimmer on body •
63” 160 cm
9 7/16” 24 cm
ø 5 1/2” ø 14 cm
ø 14 3/16” ø 36 cm
Aqua Ell floor halogen source • 1 x 250W (E26/T10 dbl. env.)....................
21
Aqua Ell suspension Ross Lovegrove 2009
Cable suspended luminaire for direct and indirect halogen lighting.
ø 4 5/16” ø 11 cm 2 3/4” 7 cm
hydroformed diffuser in mirror-treated aluminum in polished chrome • grey thermoplastic canopy with clear electrical cord and stainless steel cable • mounting to standard electrical junction boxes •
max 59 1/16” max 150 cm
ø 5 1/2” ø 14 cm
ø 14 3/16” ø 36 cm
Aqua Ell suspension halogen source • 1 x 150W (E26/T10 dbl. env.)....................
22
Special Projects Do you remember playing with building blocks as a child? Do you remember having the freedom to follow your imagination anywhere it took you? Working today as a professional designer, the reality of inflexible materials can limit your design projects. Artemide offers you a different experience. The versatile and modular design of many Artemide lighting products allows you to explore like a child again. Because so many Artemide products can be combined and configured in countless ways, they serve as “building blocks� for designers and space planners looking to create environments that are fresh, customized, and one-of-a-kind.
Logico ceiling Logico mini ceiling Logico micro ceiling Logico nano ceiling Michele De Lucchi, Gerhard Reichert Ceiling mounted luminaires for diffused incandescent or fluorescent lighting for applications with a single diffuser unit or with an assembly of three or four diffuser units in a linear or nested configuration. Custom configurations available. diffuser in handblown glass with satined finish diffuser(s) supporting frame and canopy in die-cast aluminum with pale grey matte lacquered finish • mounting to standard electrical junction boxes and with provision for additional concealed ceiling fastening for triple and quadruple configurations • newly redesigned to incorporate compact fluorescent option utilizing GU24 base with integrated ballast and lamp holder • •
For additional Logico versions please refer to the 2007-2008 Artemide Master Catalog or visit our website artemide.us Awards Design Innovationen Design Zentrum Nordrhein Westfalen Reddot Design Award 2002 - Essen (Deutschland)
Marriott Hotel, Uniondale (New York)
26
Hotel Le Favaglie, Cornaredo - Milan (Italy)
eco
design
Logico suspension Logico mini suspension Logico micro suspension Logico nano suspension Logico nano track Michele De Lucchi, Gerhard Reichert Suspension mounted luminaires for diffused incandescent or fluorescent lighting for applications with a single diffuser unit or with an assembly of three, four, or five diffuser units in a linear or nested configuration. Logico nano track mounted suspension luminaire for diffused incandescent lighting. Custom configurations available. diffuser(s) in handblown glass with satined finish diffuser(s) supporting frame in die-cast aluminum with pale grey matte lacquered finish • frame supporting cables in stainless steel • ceiling canopy in steel with pale grey thermoplastic cover • mounting to standard electrical junction boxes and with provision for additional concealed ceiling fastening for triple configurations • mounting to Lightolier or Halo track for Logico nano track • newly redesigned to incorporate compact fluorescent option utilizing GU24 base with integrated ballast and lamp holder • •
For additional Logico versions please refer to the 2007-2008 Artemide Master Catalog or visit eco our website artemide.us
design
27
Logico Special Projects Please contact your Area Sales Manager or Sales Representative for more information on the countless ways the Logico can be configured. The Artemide Engineering Team can provide you with detailed drawings. 12 3/4” 32.5 cm
9” 23 cm
15 3/4” 40 cm
11” 28 cm
ø 7 1/8” ø 18 cm
ø 7 1/8” ø 18 cm
max 66 15/16” m max 170 cm
max 78 3/4” max 200 cm
8 11/16” 22 cm
5 1/8” 13 cm
6 3/4” 17 cm
11” 28 cm
15 3/4” 40 cm
7” 18 cm
4 1/4” 11 cm
standard
mini
micro
nano
incandescent source • 1 x 150W (E26/A21)........................
incandescent source • 1 x 100W (E26/A19)........................
incandescent source • 1 x 60W (E12/G16 1⁄2).......................
incandescent source • 1 x 60W (E12/G16 1⁄2).......................
or
or
•
28
ø 7 1/8” ø 18 cm
max 78 3/4” max 200 cm
12 1/4” 31 cm
4 1/4” 11 cm
7” 18 cm
ø 7 1/8” ø 18 cm
max 78 3/4” max 200 cm
4 1/4” 11 cm
7” 18 cm
11” 28 cm
15 3/4” 40 cm
5” 13 cm
7 1/2” 19 cm
1 x 150W (E26/G40)........................
•
1 x 100W (E26/G25)........................
or
or
fluorescent source • 1 x 26W (GX24q-3/T4)..................
fluorescent source • 1 x 18W (GX24q-2/T4)..................
29
Villa Borsig, Berlin (Germany)
Tiger Lily, Edinburgh, UK
Hotel Le Favaglie, Milan, Italy
Kao Bruno Houssin 2008 suspension • cable suspended luminaire providing indirect lighting using 24W and 54W T5 fluorescent lamps • modules are made from aluminum with white paint finish • polycarbonate diffuser included • each luminaire is composed of pre-assembled and pre-wired sub-units, electrical connection is made via quick connectors • four standard 2D and 3D kits delivered with a drilling template for placing the ceiling fixing points • support cables in stainless steel supplied with grip-lock connectors for quick height adjustment at installation • ceiling feeder canopy in steel and thermoplastic, mounting to standard electrical junction boxes • ceiling non-feeder canopy in steel and thermoplastic, mounting directly to rigid ceiling surface (hardware not supplied) • equipped with thermally protected, class P, high power factor 120V electronic fluorescent ballast • for 277V electronic fluorescent ballast, dimmable electronic ballast, and emergency lighting options, please consult your Artemide Sales Representative wall/ceiling • wall or ceiling mounted luminaire providing indirect lighting using 24W and 54W T5 fluorescent lamps • modules are made from aluminum with white paint finish • polycarbonate diffuser included • each luminaire is composed of pre-assembled and pre-wired sub-units, electrical connection is made via quick connectors • three standard 2D and 3D kits delivered with a drilling template for placing the ceiling fixing points • assembly protrudes out from wall or ceiling at 6 5⁄16” (160mm) • ceiling or wall feeder canopy in steel and thermoplastic, mounting to standard electrical junction boxes • ceiling or wall non-feeder canopy in steel, mounting directly to rigid ceiling or wall surface (hardware not supplied) • equipped with thermally protected, class P, high power factor 120V electronic fluorescent ballast • for 277V electronic fluorescent ballast, dimmable electronic ballast, and emergency lighting options, please consult your Artemide Sales Representative for additional information on this model, please refer to the Artemide Architectural binder
32
Kao, CF Maier GMBH & Co. KG, Kรถnigsbronn, 2008
WE
LED
50,000 hours of LED light = 50 10W LED = 100W LED = 90% energy savings
Talak LED clamp Talak LED table Talak FLU clamp Talak FLU table
33 9/16” 85.3 cm
33 9/16” 85.3 cm
max 24 1/8” max 61 cm
Neil Poulton 2008
max 27 9/16” max 70 cm
3” 7.6 cm ø 6 7/16” ø 16.4 cm
Clamp mounted and table standing luminaires for direct and adjustable task fluorescent or LED lighting. body in injection molded thermoplastic in matte white powder coated finish, incorporating miniature T2 fluorescent or energy saving LED lighting • body rotates 360˚ and can be adjusted in height by sliding it along its stem • stem in polished chromed steel • clamp in die-cast aluminum with minimum 1/2” (1.27 cm) and maximum 2” (5 cm) opening • table base in weighted steel with matte white thermoplastic cover
1 1/16” 2.7 cm
1 1/16” 2.7 cm
•
LED version • dimmer switch on body • LED driver located on cord FLU version electronic ballast incorporated in body • on/off switch on body •
clamp fluorescent version
36
Talak FLU/LED clamp
Talak FLU/LED table
fluorescent source • 1 x 13W (axial/T2) supplied................
fluorescent source • 1 x 13W (axial/T2) supplied................
or
or
LED source • 80 LEDs/8W supplied
LED source • 80 LEDs/8W supplied
Awards Talak tavolo “Observeur du Design” 2005 Etoile 2005 A.P.C.I. - Paris (France) Reddot Award Product design “Best of the Best 2006” Essen (Deutschland) Compasso D’oro / A.D.I. Segnalazione 2008 - Milano (Italia)
table LED version
eco
design
Talak LED floor Talak FLU floor Neil Poulton 2008 33 1/2” 85 cm
Floor standing luminaires for direct adjustable fluorescent or LED lighting. body in injection molded thermoplastic in matte white powder coated finish, incorporating miniature T2 fluorescent or energy saving LED lighting • body rotates 360˚ and can be adjusted in height by sliding it along its stem • stem in polished chromed steel • floor base in white painted steel •
54 3/4” 139 cm
13/16” 2 cm
LED version • dimmer switch on body • energy efficient LED utilizing an array of 80 LEDs/8W FLU version electronic ballast incorporated in body • on/off switch on body
1 3/16” 3 cm ø 9” ø 23 cm
•
Talak FLU floor
eco
design
fluorescent source • 1 x 13W (axial/T2) supplied.............. Talak LED floor LED source • 80 LEDs/8W supplied
37
Talak LED wall Talak FLU wall
33 5/8” 85.3 cm
Neil Poulton 2009
13/16” 2 cm max h 24 3/8” max h 61.9 cm
Wall mounted luminaires for direct and adjustable task fluorescent or LED lighting. body in injection molded thermoplastic in matte white powder coated finish, incorporating miniature T2 fluorescent or energy saving LED lighting • body rotates 360˚ and can be adjusted in height by sliding it along its stem • stem in polished chromed steel • wall bracket in die-cast aluminum suitable for mounting to solid wall surface •
LED version • dimmer switch on body • LED driver located on cord FLU version electronic ballast incorporated in body • on/off switch on body •
eco
38
design
2 3/8” 6 cm 2 3/8” 6 cm
1 1/16” 2.7 cm 1 1/16” 2.7 cm
Talak FLU/LED wall fluorescent source • 1 x 13W (axial/T2) supplied................ or LED source • 80 LEDs/8W supplied
One Line LED table One Line FLU table
1 9/16” 3.9 cm
1 9/16” 3.9 cm
Ora Ito 2008 16 1/4” 41.3 cm
Table standing luminaires for direct task LED or fluorescent lighting. body with steel support in extruded aluminum in pale grey finish base in die-cast aluminum, rotatable 360˚ • fluorescent diffuser in injected molded polycarbonate with slightly protruding transparent side screen housing a miniature T2 fluorescent light source • electronic ballast located in base for fluorescent version • dimmer switch located on body for LED version • LED driver located on cord • on/off switch located on body for fluorescent version
6 1/2” 16.5 cm
15 15/16” 40.4 cm
ø 5 3/8” ø 13.7 cm
6 1/2” 16.5 cm
• •
25” 63.5 cm
ø 5 3/8” ø 13.7 cm
25” 63.5 cm
One Line LED table
One Line FLU table
LED source • 80 LEDs/8W supplied
fluorescent source • 1 x 11W (axial/T2) supplied................
Awards One Line FLU table Reddot Design Award 2005 - Essen (Deutschland)
eco
design
LED version
fluorescent version
39
Tizio classic LED table
30 3/4” 78 cm
Richard Sapper 2009
26” 66 cm
Table standing luminaire for adjustable direct task LED lighting. fully adjustable balanced electrical conductor arms in anti-corrosion treated aluminum • arm spacer bars in chromed steel with red molded thermoplastic insulators • counter weights in die-cast zinc alloy with translucent polycarbonate shield • adjustable head in die-cast aluminum • 360˚ rotatable base in die-cast aluminum with incorporated dimmer •
For additional Tizio versions please refer to the 2007-2008 Artemide Master Catalog or visit our website artemide.us
eco
40
design
46 7/8” 119 cm
42 1/2” 108 cm 12 7/16” 31.5 cm ø 4 1/4 ø 11 cm
Tizio classic LED table LED source • 5 LEDs/8W supplied
Tizio classic LED floor Richard Sapper 2009
Floor standing luminaire for adjustable direct task LED lighting. •
floor support in lacquered steel with snap-in adaptor kit in molded thermoplastic, applicable with Tizio classic LED table model for conversion to floor model, available in black only
For additional Tizio versions please refer to the 2007-2008 Artemide Master Catalog or visit our website artemide.us
27 9/16” 70 cm
ø 4 5/16” ø 11
Tizio classic LED floor
eco
design
LED source • 5 LEDs/8W supplied
41
Itis table
ø 4 3/4” ø 12 cm
Naoto Fukasawa 2009 15 3/4” 40 cm
Table standing luminaire for direct task and diffused LED lighting. re-engineered using stronger newly innovative low energy LED light source to provide a warm (2900k) intense light resulting in a 20% increase in light output yet decreasing energy consumption by 25% • body, base, and head in steel with glossy black or white painted finish • side diffuser in transparent polycarbonate • stem pivots at base up to 90˚ • head rotates up to 180˚ • dimmer switch on base •
Awards Reddot Design Award “Best of the Best” 2007 - Essen (Deutschland) Good Design Award The Chicago Atheneum 2007 - Chicago (US) Museums Die Neue Sammlung State Museum of Applied Arts and Design in the Pinakothek fder Modern München (Deutschland)
eco
42
design
13 3/4” 35 cm
11 13/16” 30 cm
ø 4 3/4” ø 12 cm
3/8” 1 cm 20” 51 cm
Itis table LED source • 7 LEDs/4W supplied
Tolomeo classic LED table Tolomeo classic LED floor Michele De Lucchi, Giancarlo Fassina 2009
50 13/16” 129 cm
Table and floor standing luminaires for adjustable direct task LED lighting. fully adjustable articulated arm structures in polished aluminum joints and tension control knobs in polished die-cast aluminum • internal tension springs and external tension control cables in stainless steel • tiltable diffuser in aluminum with incorporated touch dimmer and translucent polycarbonate shield rotates 90˚ in both directions • floor support consisting of weighted steel base with stamped aluminum cover and stem in chromed steel, combined with Tolomeo classic LED table model for conversion to floor model • optional set of castors in molded thermoplastic attach to base of floor model for easy mobility • •
25 7/16” 64.5 cm 30 3/4” 78 cm
ø 9” ø 23 cm
89” 226 cm 63 3/4” 162 cm 40 9/16” 103 cm
48” 122 cm
Tolomeo classic LED table and floor
35” 89 cm
ø 13” ø 33 cm
LED source • 5 LEDs/10W supplied
Choice of table mountings: ø 9” (23 cm) base in weighted steel with stamped aluminum cover • table clamp in die-cast aluminum, maximum opening is 2” (5 cm) • table in-set pivot in die-cast aluminum, maximum table thickness is 2 1/2” (6.4 cm), hole is ø 3/4” (1.9 cm) •
44 1/4” 112 cm
52 3/4” 134 cm
For additional Tolomeo versions please refer to the 2007-2008 Artemide Master Catalog or visit our website artemide.us
eco
design
ø
floor support
44
Tolomeo classic LED wall Michele De Lucchi, Giancarlo Fassina 2009
Wall mounted luminaire for adjustable direct task LED lighting. wall surface mounted bracket support ø 3 1/4” (ø 8.25 cm) in polished die-cast aluminum, suitable for luminaire cord and plug connection to wall outlet only • wall junction box support ø 4 1/2” (ø 11.43 cm) in polished die-cast aluminum, only suitable for plug in application to wall outlet (cannot be hardwired to junction box as driver is on cord)
51 9/16” 131 cm 26 3/8” 67 cm
•
For additional Tolomeo versions please refer to the 2007-2008 Artemide Master Catalog or visit our website artemide.us
eco
31 7/8” 81 cm
49 5/8” 126 cm
Tolomeo classic LED wall LED source • 5 LEDs/10W supplied
design
surface 45
t
Tolomeo micro table in colors Michele De Lucchi 2009
28 3/4” 73 cm
Table standing luminaires for adjustable, direct task, incandescent lighting.
ø 6 3/4” ø 17 cm
fully adjustable articulated arm structures in extruded aluminum • joints and tension control knobs in polished die-cast aluminum • tension cables in stainless steel • internal tension springs and external tension control cables in stainless steel • tiltable diffuser in stamped aluminum rotatable 360˚ in matching color • base in weighted steel with stamped aluminum cover in matching color •
46
yellow
bronze
17 1/2” 44.5 cm
27 3/16” 69 cm
Tolomeo micro table in colors incandescent source • 1 x 60W (E12/G16 1⁄2 CL) supplied............
For additional Tolomeo versions please refer to the 2007-2008 Artemide Master Catalog or visit our website artemide.us
black
14 9/16” 37 cm
orange
grey/blue
blue
Tolomeo with shade reading floor Michele De Lucchi, Giancarlo Fassina 2008 Floor standing luminaire for adjustable direct and diffused incandescent or fluorescent task lighting. fully adjustable articulated arm structure in extruded aluminum in high polished anodized finish • joints and tension control knobs in polished die-cast aluminum • tension cables in stainless steel • 7” diameter shade available in parchment paper or in pale grey satin and polycarbonate fiber blend, remains vertical regardless of arm angle • weighted steel base with stamped aluminum cover • incorporated on/off switch on lampholder • newly redesigned to incorporate compact fluorescent option utilizing GU24 base with integrated ballast and lamp holder
5 5/16” 13.5 cm ø 7 1/16” ø 18 cm
•
25 5/8” 65 cm
15°
42 1/2” 108 cm
ø
For additional Tolomeo versions please refer to the 2007-2008 Artemide Master Catalog or visit our website artemide.us
eco
34 1/4” 87 cm
design Tolomeo with shade reading floor incandescent source • 1 x 75W (E26/A19)................................... or fluorescent source • 1 x 13W (GX24q-1/T4)..........................
47
Tolomeo mega suspension Michele De Lucchi, Giancarlo Fassina 2008 ø 7 1/8” ø 18 cm
ø 7 1/8” ø 18 cm
2” 5 cm
2” 5 cm
Cable suspended luminaire for direct and diffused incandescent or fluorescent lighting. diffuser in parchment paper or pale grey satin and polycarbonate fiber blend • structure in aluminum and injected molded polycarbonate • ceiling canopy in steel with thermoplastic cover • suspension cables in stainless steel • mounting to standard electrical junction boxes • newly redesigned to incorporate compact fluorescent option utilizing GU24 base with integrated ballast and lamp holder •
max 78 3/4” max 200 cm
max 78 3/4” max 200 cm
14 3/16” 36 cm
For additional Tolomeo versions please refer to the 2007-2008 Artemide Master Catalog or visit our website artemide.us
14 3/16” 36 cm
ø 16 1/2” ø 42 cm
ø ø 20 1/2” ø 52 cm
eco
48
design
Tolomeo 42 mega suspension
Tolomeo 52 mega suspension
incandescent source • 1 x 150W (E26/A21)................................. or • 1 x 150W (E26/G40).................................
incandescent source • 1 x 150W (E26/A21)................................. or • 1 x 150W (E26/G40).................................
or
or
fluorescent source • 1 x 26W (GX24q-3/T4)..........................
fluorescent source • 1 x 26W (GX24q-3/T4)..........................
Tolomeo 7-10-12 wall shade Michele De Lucchi, Giancarlo Fassina 2009
9 7/16” 24 cm
7 1/8” 18 cm ø 4 5/16” ø 11cm
12 7/8” 32.6 cm
Adjustable wall mounted luminaires for direct and diffused incandescent or fluorescent lighting.
ø 4 5/16” ø 11cm
13 7/8” 35.2 cm
30˚
wall support, joints, canopy, and arm in polished aluminum • diffuser with aluminum frame in parchment paper or in pale grey satin and polycarbonate fiber blend • adjusts to full downward and max. 30˚ upward positions • mounting to standard electrical junction boxes • on/off switch on lamp holder • newly redesigned to incorporate compact fluorescent option utilizing GU24 base with integrated ballast and lamp holder
3 13/16” 9.7 cm
•
For additional Tolomeo versions please refer to the 2007-2008 Artemide Master Catalog or visit our website artemide.us
30˚
5” 12.7 cm
ø 7 1/8” ø 18 cm
ø 9 7/16” ø 24 cm
11” 27.8 cm
14 1/2” 36.8 cm
Tolomeo 7 wall shade
Tolomeo 10 wall shade
incandescent source • 1 x 60W (E26/A19)...................................
incandescent source • 1 x 100W (E26/A19).................................
or
or
fluorescent source • 1 x 13W (GX24q-1/T4)..........................
fluorescent source • 1 x 18W (GX24q-2/T4)..........................
12 5/8” 32 cm ø 4 5/16” ø 11cm
ø 16” 40.6 cm
eco
30˚
design
6 9/16” 16.7 cm ø 12 5/8” ø 32 cm 19 3/16” 48.8 cm
Tolomeo 12 wall shade incandescent source • 1 x 150W (E26/A21)................................. or fluorescent source • 1 x 18W (GX24q-2/T4)..........................
49
速
THE HUMAN LIGHT. Everywhere in the world, the light of Artemide for the wellness of man.
Cabildo floor Eric Solé 2008 7 1/2” 19 cm
Floor standing luminaire for indirect and diffused halogen lighting. body structure in die-cast aluminum in painted white finish base and stem in steel in painted white finish • specular aluminum reflector and lamp concealed in the inner curve of the structure • lamp shielded by frosted glass guard • sliding foot dimmer switch on cord • •
72 1/16” 183 cm
ø 11 13/16” ø 30 cm
16 1/8” 41 cm
Cabildo floor halogen source • 1 x 300W (R7S/T3) supplied.............
52
Cabildo wall Eric Solé 2008
16 1/8” 41 cm
Wall mounted luminaire for indirect and diffused halogen lighting.
4 5/16” 11 cm
upper body structure and wall support in die-cast aluminum in painted white finish • specular aluminum reflector and lamp concealed in the inner curve of the structure • lamp shielded by frosted glass guard • wall support bracket mounting to standard electrical junction boxes
9 1/16” 23 cm
•
5 1/8” 13 cm
Cabildo wall halogen source • 1 x 300W (R7S/T3) supplied.............
53
Cabildo suspension Eric Solé 2008 7 1/2” 19 cm
Cable suspended luminaire for indirect and diffused halogen lighting. m
body structure in die-cast aluminum in painted white finish • specular aluminum reflector and lamp concealed in this inner curve of the structure • lamp shielded by frosted glass guard • canopy in white molded thermoplastic with clear electrical cords and stainless steel cable • mounting to standard electrical junction boxes •
16 1/8” 41 cm
1 3/16” 3 cm
max 59 1/16” max 150 cm
Cabildo suspension halogen source • 1 x 300W (R7S/T3) supplied.............
54
Monroe table Ora Ito 2009
Table standing luminaire for adjustable diffused incandescent lighting. diffuser in white thermoplastic with incorporated white textured insert • rotatable 360˚ allowing a wide range of orientation of the light on the work surface • base and structure in steel with polished white finish • on/off switch on cord
20 1/16” 51 cm
•
ø 9 7/8” ø 25 cm
20 1/2” 52 cm
30 5/16” 77 cm
Monroe table incandescent source • 1 x 150W (E26/G40)................................ or • 1 x 150W (E26/A21)................................
56
Soffione 36-45 table Michele De Lucchi 2009 10 7/8” 27.6 cm
8 3/4” 22.2 cm
Table standing luminaires for diffused halogen lighting. diffuser shape similar to the geometric structure of crystals diffuser in white handblown glass with polished silk finish • concealed base in white molded thermoplastic with weighted steel base • dimmer switch on cord • •
ø 14 3/16” ø 36 cm
ø 17 11/16” ø 45 cm
Soffione 36 table
Soffione 45 table
halogen source • 1 x 150W (E26/T10 dbl. env.)....................
halogen source • 1 x 250W (E26/T10 dbl. env.)....................
57
Soffione 36-45 stem table Michele De Lucchi 2009 28 3/4” 73 cm 22 3/16” 56.4 cm
Table standing luminaires for diffused halogen lighting. diffuser shape similar to the geometric structure of crystals diffuser in white handblown glass with polished silk finish • base in die-cast aluminum and steel stem • base and stem available in polished black or polished chrome finish • dimmer switch on cord
ø 10 3/4” ø 27 cm
•
ø 9 1/16” ø 23 cm
•
58
ø 14 3/16” ø 36 cm
ø 17 11/16” ø 45 cm
Soffione 36 table
Soffione 45 table
halogen source • 1 x 150W (E26/T10 dbl. env.)....................
halogen source • 1 x 250W (E26/T10 dbl. env.)....................
Soffione floor Michele De Lucchi 2009
Floor standing luminaire for diffused halogen lighting. diffuser shape similar to the geometric structure of crystals diffuser in white handblown glass with polished silk finish • base in die-cast aluminum and steel stem • base and stem available in polished black or polished chrome finish • dimmer switch on cord • •
72 13/16” 185 cm
ø 13 3/8” ø 34 cm
ø 17 11/16” ø 45 cm
Soffione floor halogen source • 1 x 250W (E26/T10 dbl. env.)....................
59
Soffione 36-45 wall/ceiling Michele De Lucchi 2009
8 3/4” 22.2 cm
10 7/8” 27.6 cm
Wall or ceiling mounted luminaires for diffused halogen lighting. diffuser shape similar to the geometric structure of crystals diffuser in white handblown glass with polished silk finish • concealed mounting plate in white molded thermoplastic • mounting to standard electrical junction boxes • •
ø 14 3/16” ø 36 cm
ø ø 17 11/16” ø 45 cm
60
Soffione 36 wall/ceiling
Soffione 45 wall/ceiling
halogen source • 1 x 150W (E26/T10 dbl. env.)....................
halogen source • 1 x 150W (E26/T10 dbl. env.)....................
Soffione 36-45 suspension
ø 6” ø 15 cm
Michele De Lucchi 2009
ø 6” ø 15 cm 1 3/16” 3 cm
1 3/16” 3 cm
max 78 3/4” max 200 cm
Suspension mounted luminaires for diffused halogen lighting. 8
diffuser shape similar to the geometric structure of crystals diffuser in white handblown glass with polished silk finish • suspension cable in stainless steel • ceiling plate in steel with canopy in white molded thermoplastic • mounting to standard electrical junction boxes
8 11/16” 22 cm
max 78 3/4” max 200 cm 10 13/16” 27.5 cm
• •
ø 14 3/16” ø 36 cm
ø 17 11/16” ø 45 cm
Soffione 36 suspension
Soffione 45 suspension
halogen source • 1 x 150W (E26/T10 dbl. env.)....................
halogen source • 1 x 150W (E26/T10 dbl. env.)....................
61
Pirce suspension ø 7 1/8” ø 18 cm
Giuseppe Maurizio Scutellà 2009
Cable suspension mounted luminaire for indirect halogen lighting. structure in aluminum in white finish one continuous slender piece of aluminum is used to create a unique spiral • ceiling canopy in steel with thermoplastic cover • suspension cables in stainless steel • mounting to standard electrical junction boxes •
11” 30 cm
•
38 1/2” 97.7 cm
84” 213.4 cm
34 3/4” 88.3 cm
Awards Reddot Design Award 2009 - Essen (Deutschland)
Pirce suspension halogen source 1 x 300W (R7S/T3) supplied.............
•
62
Alicudi ceiling Ora Ito 2009
10 1/4” 26 cm
Ceiling mounted luminaire for diffused fluorescent lighting. diffuser in opal white acrylic with white stretch fabric covering concealed mounting plate in white steel • mounting to standard electrical junction boxes • •
ø 27 9/16” ø 70 cm
Alicudi ceiling fluorescent source • 2 x 42W (GX24q-4/T4)..........................
eco
64
design
Zeffiro 80-140 ceiling Pio & Tito Toso 2009 31 1/2” 80 cm
55 1/2” 141 cm
4 3/4” 12 cm
4 3/4” 12 cm
Ceiling mounted luminaires for diffused fluorescent lighting. 8 11/16” 22 cm
diffuser in opal white methacrylate giving the appearance of opal white glass • structure in painted white steel • fasteners in clear acrylic • mounting to standard electrical junction boxes
11” 28 cm
•
6 1/4” 15.8 cm
9 1/16” 23 cm
Zeffiro 80 ceiling
Zeffiro 140 ceiling
fluorescent source • 1 x 55W (2G11/T5)............................
fluorescent source • 2 x 54W (G5/T5)...............................
5
eco
design
Zeffiro 80
Zeffiro 140
65
Noto suspension Michele De Lucchi 2009
Suspension mounted luminaire for diffused fluorescent lighting. 33 7/8” 86 cm
the dragon, a symbol of eternity and power in the Chinese tradition, is transformed from paper into glass and light, six movable cylinders form a luminaire with great impact and a strong personality • diffusers in white opal handblown glass • structure in steel • supplied with optional red external filter • mounting to standard electrical junction boxes with additional support cable mounting to rigid ceiling surface •
66
68 1/8” 173 cm
15 3/16” 38.5 cm
Awards Reddot Design Award 2008 - Essen (Deutschland)
Noto suspension
eco
fluorescent source • 2 x 80W (G5/T5 HO)...........................
design
Tian Xia 2 RGB suspension ø 11 13/16” ø 30 cm
Carlotta de Bevilacqua 2008
Cable suspended cylindrical luminaire that offers a direct, indirect, and diffused halogen lighting and diffused colored fluorescent lighting. structure in polished aluminum with mirror finish and thermoplastic resin mirrored diffuser • ceiling canopy in polished aluminum incorporates a microprocessor and remote controlled, infrared receiver • three separately managed light systems: - the RGB fluorescents (12 in total) are positioned in the cavity of the diffuser cylinder, and produce the 6 different color ranges and a white light - 1 300W indirect halogen and 1 300W direct halogen can each be dimmed independently • a color filter is provided for direct halogen light • light performance is controlled by a remote control unit • suspension cables in stainless steel • mounting to standard electrical junction boxes
max 78 3/4” max 200 cm 17 3/4” 45 cm
•
For additional Tian Xia versions please refer to the 2007-2008 Artemide Master Catalog or visit our website artemide.us
ø 31 1/2” ø 80 cm
Tian Xia 2 RGB suspension halogen source • 1 x 300W (R7S/T3) supplied............. + •
1 x 300W (R7S/T3) supplied.............
+ fluorescent source • 4 x 14W (G5/T5 blue) supplied.......... + •
4 x 14W (G5/T5 red) supplied............
+ •
4 x 14W (G5/T5 green) supplied........
67
Eurialo wall
ADA
Pio & Tito Toso 2008
Wall mounted luminaires for indirect and direct halogen or fluorescent lighting. diffuser in molded aluminum with inner reflector in painted white and outer body in white, black, or aluminum • halogen version suitable for ADA application • mounting to standard electrical junction boxes
6 1/4” 15.8 cm
6 1/4” 15.8 cm
•
eco
14 3/16” 36 cm
4 5/8” 11.7 cm
14 3/16” 36 cm
4” 10.2 cm
Eurialo wall
Eurialo wall ADA
fluorescent source • 1 x 32W (GX24q-3/T4)...........................
halogen source • 1 x 200W (R7S/T3) supplied.............
design
white
black
aluminum
68
Choose suspension Choose mega suspension
ø 5 1/8” ø 13 cm
ø 5 1/8” ø 13 cm
1 15/16” 5 cm
1 15/16” 5 cm
Matteo Thun 2008
max 78 3/4” max 200 cm
max 78 3/4” max 200 cm 8 7/8” 22.5 cm
Cable suspended luminaires for direct and diffused incandescent or fluorescent lighting. diffuser in transparent polycarbonate with pleated design incorporating a red thermoformed silk-screened polycarbonate or parchment paper removable insert (custom colors available) • grey thermoplastic canopy with clear electrical cords and stainless steel cable • mounting to standard electrical junction boxes • newly redesigned to incorporate compact fluorescent option utilizing GU24 base with integrated ballast and lamp holder
14 9/16 37 cm
ø 14 3/16” ø 35.8 cm
ø 21 11/16” ø 55 cm
•
For additional Choose versions please refer to the 2007-2008 Artemide Master Catalog or visit our website artemide.us
eco
Choose suspension
Choose mega suspension
incandescent source • 1 x 100W (E26/A19).................................
incandescent source • 3 x 100W (E26/A19).................................
or
or
fluorescent source • 1 x 13W (GX24q-1/T4).......................... or • 1 x 18W (GX24q-2/T4)..........................
fluorescent source • 3 x 13W (GX24q-1/T4).......................... or • 3 x 18W (GX24q-2/T4)..........................
design
69
Pipe wall/ceiling Herzog & de Meuron 2008 ø 7 1/16” ø 18 cm
Wall or ceiling mounted luminaire for adjustable direct and indirect fluorescent lighting. body structure in flexible steel tube with grey lacquered finish enclosed in a translucent white silicon sleeve • diffuser in molded translucent white polycarbonate with an incorporated anti-glare reflector in specular aluminum with micro-perforations for side emission of thin beams of light • mounting to standard electrical junction boxes
46 7/16” 118 cm
•
For additional Pipe versions please refer to the 2007-2008 Artemide Master Catalog or visit our website artemide.us
eco
70
design
ø 8 1/4” ø 21 cm
Pipe wall/ceiling fluorescent source • 1 x 32W (GX24q-3/T4)..........................
Nur Gloss suspension Nur mini Gloss suspension
ø 7 1/8” ø 18 cm
ø 7 1/8” ø 18 cm
Ernesto Gismondi 2009
highly polished and smooth domed diffuser in spun aluminum, available in glossy white or glossy black with sanded glass at top of dome • acrylic diffuser at bottom to shield the lamps • ceiling canopy in steel with thermoplastic cover • suspension cables in stainless steel • mounting to standard electrical junction boxes
11 1/4” 28.5 cm
16 15/16” 43 cm
•
For additional Nur versions please refer to the 2007-2008 Artemide Master Catalog or visit our website artemide.us
eco
white
72
max 78 3/4” max 200 cm
max 86 5/8” max 220 cm
Cable suspended luminaires providing direct halogen or fluorescent lighting with subtle indirect lighting.
ø 14 3/16” ø 36 cm
ø 21 11/16” ø 55 cm
Nur Gloss suspension
Nur mini Gloss suspension
halogen source • 1 x 250W (E26/T10 dbl. env.)....................
halogen source • 1 x 150W (E26/T10 dbl. env.)....................
or
or
fluorescent source • 1 x 70W (GX24q-6/T4)..........................
fluorescent source • 1 x 42W (GX24q-4/T4)..........................
design
black
Nur ceiling Nur mini ceiling
ø 3 15/16” ø 10 cm
ø
ø ø 3 15/16” ø 10 cm
Ernesto Gismondi 2008
16 15/16” 43 cm
11” 28 cm
Ceiling mounted luminaires for direct halogen or fluorescent lighting with subtle indirect lighting creating a halo on the ceiling. dome shaped body/diffuser in spun aluminum available in natural aluminum or charcoal grey • polycarbonate diffuser encased in body to diffuse lamps • mounting to standard electrical junction boxes •
For additional Nur versions please refer to the 2007-2008 Artemide Master Catalog or visit our website artemide.us
eco
Nur ceiling
Nur mini ceiling
halogen source • 1 x 250W (E26/T10 dbl. env.)....................
halogen source • 1 x 150W (E26/T10 dbl. env.)....................
or
or
fluorescent source • 1 x 70W (GX24q-6/T4)..........................
fluorescent source • 1 x 42W (GX24q-3/T4)..........................
design
charcoal grey
74
ø 14 3/16” ø 36 cm ø 21 11/16” ø 55 cm
aluminum
Nur 1618 Hal suspension Nur 1618 FLU suspension Ernesto Gismondi 2008 ø 7 1/8” ø 18 cm
Cable suspended luminaires providing direct halogen or fluorescent lighting with subtle indirect lighting. large deep domed diffuser in spun aluminum, available in charcoal grey or natural aluminum finish with sanded glass at top of dome • ceiling canopy in steel with thermoplastic cover in grey • suspension cables in stainless steel • mounting to standard electrical junction boxes •
max 102 3/8” max 260 cm
27 9/16” 70 cm
For additional Nur versions please refer to the 2007-2008 Artemide Master Catalog or visit our website artemide.us
ø 35 7/16” ø 90 cm
Nur 1618 HAL suspension halogen source • 2 x 500W (R7S/T3) supplied............. Nur 1618 FLU suspension
eco
fluorescent source • 4 x 42W (GX24q-4/T4)...........................
design
Nur mini
Nur
Nur 1618
75
Infini suspension Gerhard Reichert 2008
Cable suspended luminaire providing direct and indirect diffused lighting. body in transparent Polymethyl methacrylate (PMMA) with green edge color providing the high quality look of glass • diffuser in opaline polycarbonate • interior ballast holder made from extruded aluminum with a metallic grey paint finish • light distribution: 57% indirect and 43% direct • support cables in stainless steel supplied with grip-lock connectors for quick height adjustment at installation • ceiling feeder and canopy mounting to standard electrical junction boxes and non-feed support canopy in steel mounting directly to rigid ceiling surface (hardware not supplied) • equipped with thermally protected, class P, high power factor 120V electronic fluorescent ballast
47 5/8” 121 cm
•
for additional information on this model, please refer to the Artemide Architectural Binder
eco
76
design
max 78” max 200 cm
8 3/8” 21.2 cm
2 3/8” 6.1 cm
Infini suspension fluorescent source • 2 x 28W (G5/T5)................................
2
Kalifa wall
ADA
ADA
Ernesto Gismondi 2008
Wall mounted luminaires for direct and indirect lighting. body in extruded aluminum with white or grey painted finish and 3/16” (0.4 cm) thick screen-printed tempered glass • light distribution: 81% indirect and 19% direct • equipped with thermally protected, class P, high power factor 120V electronic fluorescent ballast • white backplate provided to cover junction box • mounting to wall surface, over standard electrical junction box • for 277/347V electronic fluorescent ballast, dimmable electronic ballast, and emergency lighting options, please consult your Artemide Sales Representative •
for additional information on this model and matching Kalifa series, please refer to the Artemide Architectural Binder
eco
3 15/16” 10 cm
3 15/16” 10 cm 2” 5 cm
23 1/8” 58.7 cm
Kalifa 23 wall fluorescent source 5 • 1 x 24W (G5/T5 HO)...........................
2” 5 cm
3
58 9/16” 148.7 cm
Kalifa 59 wall fluorescent source • 1 x 80W (G5/T5 HO)...........................
design
77
Square wall A+A Cooren 2008 1 1/4” 3.1 cm 1/2” 1.3 cm
Wall mounted luminaire for indirect halogen or fluorescent lighting. body in die-cast aluminum with matte white or light grey painted finish • high efficiency reflector in anodized aluminum with lamp glass protector on halogen version • wall support bracket mounting to standard electrical junction boxes • fluorescent version equipped with thermally protected, class P, high power factor 120V electronic fluorescent ballast (277V optional)
7 3/4” 19.7 cm
•
for additional information on this model, please refer to the Artemide Architectural binder
6 3/4” 17.1 cm
Square wall halogen source • 1 x 300W (R7S/T3)........................... or fluorescent source • 1 x 18W (G24q-2/T4)..............................
eco
design
matte white
78
Kanji wall Eric Solé 2008
3 1/8” 8 cm 6 3/4” 17.1 cm
Wall mounted luminaires for indirect halogen or fluorescent lighting. body in extruded aluminum with white painted finish • protective glass included for halogen versions • mounts to standard electrical junction boxes, direct wall attachment also required for longer models (hardware by others) • equipped with thermally protected, class P, high power factor 120V electronic fluorescent ballast (277V/347V optional) •
for additional information on this model, please refer to the Artemide Architectural Binder
11” 28 cm 3 1/8” 8 cm
6 3/4” 17.1 cm
35 7/16” 90 cm 3 1/8” 8 cm
6 3/4” 17.1 cm
63” 160 cm
Kanji 11 wall halogen source • 1 x 300W (R7S/T3)............................ or fluorescent source • 1 x 26W (G24q-3/T4).............................. Kanji 35 wall fluorescent source • 1 x 55W (2G11/T5).............................. or • 1 x 80W (2G11/T5)............................ Kanji 63 wall fluorescent source • 1 x 80W (G5/T5)................................
eco
design
79
Ariel AC large table Ron Rezek 2009 ø 12” ø 30 cm
Table standing luminaire for diffused incandescent or fluorescent lighting.
ø 8 1/4” ø 21 cm
13 1/2” 34 cm 26 1/2” 67 cm
diffuser in three-tier opal white polypropylene • base and stem in steel with nickel painted finish • on/off black rocker switch and two AC 3-prong outlets on base for the plug-in of personal electronics • ballast incorporated in base for the fluorescent version • clear cord • optional table top bolt down •
Ariel AC large table
For additional Ariel versions please refer to the 2007-2008 Artemide Master Catalog or visit our website artemide.us
incandescent source • 1 x 100W (E26/A19)................................ or fluorescent source • 1 x 26W (G24q-3/T4)..............................
eco
82
design
Bolo classic AC table
ø 12 1/2” ø 32 cm
Peclar Nalbandian, Ron Rezek 2009 9” 23 cm
Table standing luminaire for diffused incandescent or fluorescent lighting.
9” 23 cm
8 3/4” 23 cm
diffuser in handblown, ribbed opal white glass base in polished chrome plated steel • on/off black rocker switch and two AC 3-prong outlets on base for plug-in of personal electronics • black cord without dimmer • ballast incorporated in base for the fluorescent version • optional table top bolt down •
25” 64 cm
•
Bolo classic AC table
For additional Bolo versions please refer to the 2007-2008 Artemide Master Catalog or visit our website artemide.us
incandescent source • 1 x 100W (E26/G30)................................ or fluorescent source • 1 x 26W (G24q-3/T4)..............................
eco
design
83
Bolo linen table
ø 13” ø 33 cm
Peclar Nalbandian, Ron Rezek 2009
Table standing luminaire for diffused incandescent lighting. shade/diffuser in white linen fabric with white polypropylene backing • base in polished aluminum • on/off pull switch with chrome plated pull grip • clear cord with optional in-line dimmer • optional table top bolt down •
For additional Bolo versions please refer to the 2007-2008 Artemide Master Catalog or visit our website artemide.us
84
10 1/2” 27 cm 25” 64 cm
Bolo linen table incandescent source • 1 x 100W (E26/G30)................................
Bolo linen AC table
ø 13” ø 33 cm
Peclar Nalbandian, Ron Rezek 2009 9” 23 cm
Table standing luminaire for diffused incandescent or fluorescent lighting. shade/diffuser in white linen fabric with white polypropylene backing • base in polished chrome plated steel • on/off black rocker switch and two AC 3-prong outlets on base for the plug-in of personal electronics • ballast incorporated in base for the fluorescent version • optional table top bolt down
9” 23 cm 10 1/2” 27 cm
•
25” 64 cm
Bolo linen AC table
For additional Bolo versions please refer to the 2007-2008 Artemide Master Catalog or visit our website artemide.us
incandescent source • 1 x 100W (E26/G30)................................ or fluorescent source • 1 x 26W (G24q-3/T4)..............................
eco
design
85
Dome 14 table Dome 14 AC table Ernesto Gismondi 2009
Table standing luminaires for direct and indirect diffused incandescent or fluorescent lighting (AC version). Dome 14 table • dome shaped diffuser in spun aluminum with natural anodized brushed aluminum, anodized brushed charcoal, or matte white powder coated finish • upper diffuser lens in molded frosted glass • base and stem in polished chrome finish • on/off pull switch with chromed steel grip • clear cord with optional in-line dimmer • optional table top bolt down Dome 14 AC table dome shaped diffuser in spun aluminum with natural anodized brushed aluminum, anodized brushed charcoal, or matte white powder coated finish • upper diffuser lens in molded frosted glass • base and stem in polished chrome finish • on/off black rocker switch and two AC 3-prong outlets on base for the plug-in of personal electronics • ballast incorporated in base for the fluorescent version • optional table top bolt down •
For additional Dome versions please refer to the 2007-2008 Artemide Master Catalog or visit our website artemide.us
ø 14” ø 35.5 cm
ø 14” ø 35.5 cm
ø 8 1/4” ø 21 cm
13” 33 cm
13” 33 cm
28” 71 cm
28” 71 cm
Dome 14 table
Dome 14 AC table
incandescent source • 1 x 100W (E26/A19)................................
incandescent source • 1 x 100W (E26/A19)................................ or fluorescent source • 1 x 26W (G24q-3/T4)..............................
eco
design
brushed aluminum
brushed charcoal
matte white
86
87
Illusa small/large table Illusa AC large table
10” 25 1/2 cm 8” 20 cm
Ron Rezek, Guy Burr 2009
Illusa table small/large • diffuser in Tiffany-type white glass with antique bronzed metal caning frame • base and stem in antique bronzed steel • on/off pull switch with optional dimmer on cord for incandescent version • on/off pull switch without dimmer on cord for fluorescent version • ballast incorporated in lampholder for fluorescent version • optional table top bolt down Illusa AC table large diffuser in Tiffany-type white glass with antique bronzed metal caning frame • base and stem in antique bronzed steel • on/off black rocker switch and two AC 3-prong outlets on base for the plug-in of personal electronics • black cord without dimmer • ballast incorporated in base for the fluorescent version • optional table top bolt down •
88
10” 25 1/2 cm
10” 25 1/2 cm
12” 30.5 cm
12” 30.5 cm
8” 20 cm
Table standing luminaires for diffused incandescent or fluorescent lighting.
For additional Illusa versions please refer to the 2007-2008 Artemide Master Catalog or visit eco our website artemide.us
10” 25 1/2 cm
10” 25.5 cm 20 1/2” 52 cm
24 1/2” 62 cm
9” 23 cm
24 1/2” 62 cm
Illusa small table
Illusa AC large table
incandescent source • 1 x 75W (E26/A19).........................................
incandescent source • 1 x 100W (E26/A19)................................
or
or
fluorescent source • 1 x 18W (G24q-2/T4).....................................
fluorescent source • 1 x 26W (G24q-3/T4)..............................
Illusa large table incandescent source • 1 x 100W (E26/A19)....................................... or fluorescent source • 1 x 26W (G24q-3/T4).....................................
design
9” 23 cm
89
Jupe classic AC large table
ø 11” ø 28 cm
Peclar Nalbandian, Guy Burr 2009 9” 23 cm
Table standing luminaire for diffused incandescent or fluorescent lighting.
9” 23 cm
8 1/2” 22 cm
diffuser in molded, ribbed, sanded glass • base, stem, and diffuser support in polished chrome plated steel • on/off black rocker switch and two AC 3-prong outlets on base for the plug-in of personal electronics • black cord without dimmer • ballast incorporated in base for the fluorescent version • optional table top bolt down •
23” 58 cm
Jupe classic AC large table
For additional Jupe versions please refer to the 2007-2008 Artemide Master Catalog or visit our website artemide.us
9
incandescent source • 1 x 100W (E26/G30)................................ or fluorescent source • 1 x 26W (G24q-3/T4)..............................
eco
design
Jupe classic AC table large and linen AC table base
90
Jupe linen table Jupe linen AC table
ø 13” ø 33 cm
ø 13” ø 33 cm
9” 23 cm
Peclar Nalbandian, Guy Burr 2009 9” 23 cm
Table standing luminaires for diffused incandescent or fluorescent lighting (AC version). Jupe linen table • shade/diffuser in white linen fabric with white polypropylene backing • base and socket cover in polished aluminum • stem in polished chrome plated steel • on/off pull cord switch with polished chrome plated steel grip • clear cord with optional in-line dimmer • optional table top bolt down Jupe linen AC table shade/diffuser in white linen fabric with white polypropylene backing • base, stem, and diffuser support in polished chrome plated steel • on/off black rocker switch and two AC 3-prong outlets on base for the plug-in of personal electronics • black cord without dimmer • ballast incorporated in base for the fluorescent version • optional table top bolt down •
For additional Jupe versions please refer to the 2007-2008 Artemide Master Catalog or visit our website artemide.us
eco
9 1/2” 24 cm
9 1/2” 24 cm
24 1/2” 62 cm
24 1/2” 62 cm
Jupe linen table
Jupe linen AC table
incandescent source • 1 x 100W (E26/G30)................................
incandescent source • 1 x 100W (E26/G30)................................. or fluorescent source • 1 x 26W (G24q-3/T4)..............................
design
91
Bolo linen floor Peclar Nalbandian, Guy Burr 2009 ø 12 1/2” ø 32 cm
Floor standing luminaire for diffused incandescent lighting. shade/diffuser in white linen fabric with white polypropylene backing • base in polished aluminum • stem in chrome plated steel • on/off pull switch with chrome plated pull grip • clear cord with optional in-line dimmer •
10 1/2” 27 cm
For additional Bolo versions please refer to the 2007-2008 Artemide Master Catalog or visit our website artemide.us
61” 155 cm
Bolo linen floor incandescent source • 1 x 100W (E26/G30)...........
92
Dome 14 floor Ernesto Gismondi 2009
Floor standing luminaire for direct and indirect diffused incandescent lighting. dome shaped diffuser in spun aluminum with natural anodized brushed aluminum, anodized brushed charcoal, or matte white powder coated finish • upper diffuser lens in molded frosted glass • base and stem in polished chrome finish • on/off pull switch with chromed steel grip • clear cord with optional in-line dimmer •
ø 14” ø 35.5 cm
13” 33 cm
61” 155 cm
For additional Dome versions please refer to the 2007-2008 Artemide Master Catalog or visit our website artemide.us
Dome 14 floor incandescent source • 1 x 100W (E26/A19).................................
brushed aluminum
brushed charcoal
matte white 93
Jupe linen floor Peclar Nalbandian, Guy Burr 2009
ø 13” ø 33 cm
Floor standing luminaire for diffused incandescent lighting. shade/diffuser in white linen fabric with white polypropylene backing • base and socket cover in polished aluminum • stem and diffuser supports in chrome plated steel • on/off pull cord switch with polished chrome plated steel grip • clear cord with optional in-line dimmer •
9 1/2” 24 cm
For additional Jupe versions please refer to the 2007-2008 Artemide Master Catalog or visit our website artemide.us
61 1/2” 156 cm
Jupe linen floor incandescent source • 1 x 100W (E26/G30).................................
94
Bliss 13-26-38-50 wall/ceiling
ADA
ADA
MOODD 2008 13” 33 cm
Wall or ceiling mounted architectural luminaires for direct and indirect fluorescent lighting. support body in extruded anodized natural aluminum frontal fascia and side brackets in 1/4” aluminum plate with brushed anodized finish or matte white powder coated finish, chrome plated finish also available for Bliss 13 • upper and lower diffusers in extruded frosted acrylic, in frosted glass for Bliss 13 • 120V electronic ballasts with 277V and dimmable optional • predisposed for “pig-tail” mounting or single gang/switch electrical junction box mounting • cover plate supplied for mounting to standard electrical junction boxes
26” 66 cm
4” 10 cm
4” 10 cm
•
3 1/4” 8 cm
•
3 1/4” 8 cm
Bliss 13 wall/ceiling
Bliss 26 wall/ceiling
fluorescent source • 1 x 42W (GX24q-4/T4)..........................
fluorescent source • 1 x 24W (G5/T5 HO)...........................
ADA
ADA
38” 97 cm
50” 127 cm
4” 10 cm
4” 10 cm
3 1/4” 8 cm
eco
design
3 1/4” 8 cm
Bliss 38 wall/ceiling
Bliss 50 wall/ceiling
fluorescent source • 1 x 39W (G5/T5 HO)...........................
fluorescent source • 1 x 54W (G5/T5 HO)...........................
2
chrome plated
brushed anodized aluminum
brushed anodized aluminum
matte white
95
Brick wall
ADA
Ernesto Gismondi 2008 11 5/8” 30 cm
Wall mounted luminaire for indirect and diffused fluorescent lighting.
4” 10 cm
4 1/4” 11 cm
diffuser available in molded clear glass with inner chromed perforated steel lining or in frosted glass • back plate in 1/8” chromed steel, mounting to standard electrical junction boxes •
Brick wall fluorescent source • 1 x 26W (G24q-3/T4)................................ or • 1 x 32W (GX24q-3/T4)...........................
eco
design
frosted glass
clear glass with perforated reflector
96
Crescent half wall Crescent full wall
ADA
ADA 5” 13 cm
Guy Burr 2009 5” 13 cm
Wall mounted luminaires for diffused incandescent or fluorescent lighting.
4” 10 cm
4” 10 cm
22 3/4” 25 cm
11 1/4” 29 cm
diffuser in opal white handblown glass die-cast end caps in polished chrome • wall back plate in white powder coated finish, mounting to standard junction boxes • •
Crescent half wall
Crescent full wall
incandescent source • 1 x 75W (E26/A19)..................................
incandescent source • 2 x 60W (E26/A19)..................................
or
or
5
fluorescent source • 1 x 26W (G24q-3/T4)..............................
eco
fluorescent source • 1 x 36W (2G11/T4)............................
design
97
Dupla FLU single/double wall Peclar Nalbandian, Ron Rezek 2008
ADA
ADA 4” 10 cm
4” 10 cm
4” 10 cm
4” 10 cm
Wall mounted luminaire for direct and diffused fluorescent lighting. body in die-cast aluminum with silver paint finish • diffuser in die-cast aluminum with etched white handblown glass • 120/277V electronic fluorescent ballast integrated in lampholder • mounting to standard electrical junction boxes • optional toggle switch for Dupla single walls
15 1/2” 39 cm
•
For additional Dupla versions please refer to the 2007-2008 Artemide Master Catalog or visit our website artemide.us
eco
design
FLU single wall
98
10” 25 cm
1
Dupla FLU single wall
Dupla FLU double wall
fluorescent source • 1 x 18W (G24q-2/T4)..............................
fluorescent source • 2 x 13W (G24q-1/T4)..............................
FLU double wall
Dupla FLU ceiling
4” 10 cm
Peclar Nalbandian, Ron Rezek 2008
4” 10 cm
Ceiling mounted luminaire for direct and diffused fluorescent lighting. body in die-cast aluminum with silver paint finish diffuser in die-cast aluminum with etched white handblown glass • 120V or 277V fluorescent ballast integrated in lampholder • mounting to standard electrical junction boxes •
17” 43 cm
•
For additional Dupla versions please refer to the 2007-2008 Artemide Master Catalog or visit our website artemide.us
eco
100
design
Dupla FLU ceiling fluorescent source • 1 x 18W (G24q-2/T4)..............................
Illusa strip 12 wall/ceiling
ADA
Ron Rezek, Guy Burr 2008 12” 31 cm
Wall or ceiling mounted luminaire for diffused fluorescent lighting, particularly suited for bathroom mirror applications.
3 1/4” 8.5 cm 3 1/4” 8.5 cm
diffuser in Tiffany-type white glass with antique bronzed metal caning frame • diffuser supporting plate in white powder coated finish • mounting to standard electrical junction boxes to center of luminaire •
For additional Illusa versions please refer to the 2007-2008 Artemide Master Catalog or visit our website artemide.us
eco
Illusa strip 12 wall/ceiling fluorescent source • 1 x 18W (2G11/T5)...............................
design
101
Illusa wedge wall
ADA
Ron Rezek, Guy Burr 2008 11” 28 cm 4” 10 cm
Wall mounted luminaire for diffused fluorescent lighting. diffuser in Tiffany-type white glass with antique bronzed metal caning frame • diffuser supporting plate in white powder coated finish • mounting to standard electrical junction boxes to center of luminaire •
For additional Illusa versions please refer to the 2007-2008 Artemide Master Catalog or visit our website artemide.us
8” 20 cm
Illusa wedge wall fluorescent source • 1 x 26W (G24q-3/T4)..............................
eco
102
design
Illusa square 18 ceiling/wall
ADA 18” 46 cm
Ron Rezek, Guy Burr 2008
4” 10 cm
Ceiling or wall mounted luminaire for diffused fluorescent lighting.
18” 46 cm
diffuser in Tiffany-type white glass with antique bronzed metal caning frame • diffuser supporting plate in white powder coated finish • mounting to standard electrical junction boxes to center of luminaire •
Illusa square 18 ceiling/wall
For additional Illusa versions please refer to the 2007-2008 Artemide Master Catalog or visit our website artemide.us
eco
fluorescent source • 1 x 55W (GRY10q-3/T6/2D HO)................ or • 2 x 24W (2G11/T5)............................ or • 1 x 55W (2GX13/T5)...................................
design
103
Plat 17-22 ceiling/wall
ADA
ADA
Guido Buratto 2008 4” 10 cm
4” 10 cm
Ceiling or wall mounted luminaires for direct diffused fluorescent lighting. diffuser in white acrylic outer body in spun aluminum with white or silver powder coated finish • outer body twists off for quick re-lamping • inner body in white powder coated steel • mounting to standard electrical junction boxes • •
eco
silver
104
design
ø 17” ø 43 cm
ø 22” ø 56 cm
Plat 17 ceiling/wall
Plat 22 ceiling/wall
fluorescent source • 1 x 22W (2GX13/T5)................................... or • 1 x 32W (GX24q-3/T4).......................... or • 1 x 42W (GX24q-4/T4)...........................
fluorescent source • 1 x 55W (2GX13/T5)................................... or • 2 x 26W (GX24q-3/T4)................................ or • 2 x 32W (GX24q-3/T4)...........................
white
Solana surface ceiling/wall Solana recessed ceiling/wall
ADA
ADA 4 3/4” 12 cm
Guido Buratto 2008
3” 8 cm
Ceiling or wall surface or recessed mounted luminaires for diffused fluorescent lighting.
ø 18 1/2” ø 47 cm
surface or recessed mounting body in spun aluminum with internal reflective white lacquer finish and external silver grey powder coated finish • surface body mounting to standard electrical junction boxes • recessed body mounting to rigid ceiling surfaces, requiring a ø 14 3/4” cutout, equipped with external steel ballast connection box in galvanized steel • diffuser in opal and frosted acrylic with supporting ring in laser cut aluminum with silver powder coated finish
ø 18 1/2” ø 47 cm
•
Solana surface ceiling/wall
Solana recessed ceiling/wall
fluorescent source • 1 x 55W (2GX13/T5)................................... or • 2 x 26W (GX24q-3/T4).............................. or • 2 x 32W (GX24q-3/T4)...........................
fluorescent source • 1 x 55W (2GX13/T5)................................... or • 2 x 26W (GX24q-3/T4).............................. or • 2 x 32W (GX24q-3/T4)...........................
4
eco
design
surface ceiling
106
recessed ceiling
Jupe 8-11 ceiling Peclar Nalbandian, Guy Burr 2008
8 1/2” 22 cm
Ceiling mounted luminaire for diffused incandescent or fluorescent lighting. diffuser in molded, ribbed, white glass ceiling canopy and diffuser supports in chromed steel • mounting to standard electrical junction boxes • ballast for fluorescent versions housed in ceiling canopy • optional anti-glare shield in frosted acrylic •
ø 8” ø 20 cm
•
For additional Jupe versions please refer to the 2007-2008 Artemide Master Catalog or visit our website artemide.us
eco
11 1/2” 29 cm
ø 11” ø 28 cm
Jupe 8 ceiling
Jupe 11 ceiling
incandescent source • 1 x 60W (E26/A15)...................................
incandescent source • 1 x 100W (E26/G30)................................
or
or
fluorescent source • 1 x 26W (GX24q-3/T4)...........................
fluorescent source • 1 x 32W (GX24q-3/T4)...........................
design
107
Jetz wall ball-cone-egg-tube 6 1/4” 16 cm
Ron Rezek 2009
Wall mounted mini luminaires for indirect and diffused incandescent lighting
5 3/4” 15 cm
9 1/4” 24 cm
8 3/4” 22 cm
diffuser in etched handblown glass diffuser shapes available: ball, cone, egg, and tube • etched glass colors available: white, lime, and goldenrod • wall bracket and canopy in nickel painted steel, mounting to standard electrical junction boxes • •
For additional Jetz versions please refer to the 2007-2008 Artemide Master Catalog or visit our website artemide.us
Jetz ball wall
Jetz cone wall
incandescent source • 1 x 60W (E12/G16 1⁄2)...............................
•
incandescent source 1 x 60W (E12/G16 1⁄2)................................
5 5 3/4” 15 cm
5 3/4” 15 cm
10 1/4” 26 cm
Jetz egg wall
Jetz tube wall
incandescent source 1 x 60W (E12/G16 1⁄2)...............................
•
•
108
10 1/2” 27 cm
ball
cone
egg
tube
incandescent source 1 x 60W (E12/G16 1⁄2)...............................
Tejido 6 oval wall Tejido 6 round wall ø 7 1/2” ø 18 cm
Peclar Nalbandian, Guy Burr 2009
Wall mounted luminaires for indirect and diffused incandescent lighting with shadowing effects.
12” 30 cm
ø 6 1/2” ø 17 cm
9” 23 cm
oval or round shaped diffusers in hand woven strips of natural “alpacca”, a rust resistant metal alloy of copper, nickel, and zink • wall bracket in steel with nickel painted finish • mounting to standard electrical junction boxes •
For additional Tejido versions please refer to the 2007-2008 Artemide Master Catalog or visit our website artemide.us
oval
Tejido 6 oval wall
Tejido 6 round wall
incandescent source • 1 x 75W (E26/A19 clear)...........................
incandescent source • 1 x 60W (E12/G16 1⁄2 clear).......................
round
109
Disk 12-18 suspension Guido Buratto 2008 max 78” max 198 cm
Cable suspended luminaire for direct and diffused incandescent or self-ballasted fluorescent lighting. 12” or 18” disk diffuser in 1/4” solid aluminum plate with polished finish, or in 1/4” plate glass with clear or frosted finish • diffuser support/lampholder housing in die-cast aluminum with polished finish ø • supporting cable in stainless steel with black electrical cord (white or clear cord optional at no charge) • ceiling canopy in chrome plated steel • black cord standard, with white or clear cord optional • luminaire design completed by a white globe incandescent or self-ballasted fluorescent lamp supplied with luminaire
max 80” max 203 cm
8” 20 cm
10” 25 cm
•
eco
ø 12” ø 30 cm looking up at lamp ø 18” ø 46 cm looking up at lamp
Disk 12 suspension
Disk 18 suspension
incandescent source • 1 x 100W (E26/G25) supplied...................
incandescent source • 1 x 100W (E26/G40) supplied...................
or
or
self-ballasted fluorescent source • 1 x 14W (E26/G25) supplied....................
self-ballasted fluorescent source • 1 x 19W (E26/G40) supplied.....................
design
clear glass
polished aluminum
110
frosted glass
2.5 Square strip 26-37-49 wall
ADA
ADA
Ron Rezek 2009
2 1/2” 6 cm 2 1/2” 6 cm
2 1/2” 6 cm
Wall mounted luminaires for direct and diffused fluorescent lighting. body in extruded aluminum with natural anodized or white powder coated finish • end caps in die-cast aluminum in silver grey or white powder coated finish • diffuser in extruded acrylic with frosted finish • fixture supplied with a white or anodized cover plate for mounting to standard electrical junction boxes, and also with fitting for optional “pig-tail” mounting without cover plate, directly to wall surface
2 1/2” 6 cm
37” 94 cm
•
For additional 2.5 Square versions please refer to the 2007-2008 Artemide Master Catalog or visit our website artemide.us
26” 66 cm
2.5 Square strip 26 wall
2.5 Square strip 37 wall
fluorescent source • 1 x 14W (G5/T5)................................ or • 1 x 24W (G5/T5 HO)..........................
fluorescent source • 1 x 21W (G5/T5)................................ or • 1 x 39W (G5/T5 HO)..........................
ADA
2 1/2” 6 cm 2 1/2” 6 cm
49” 124 cm
eco
design
2.5 Square strip 49 wall fluorescent source • 1 x 28W (G5/T5)................................ or • 1 x 54W (G5/T5 HO)..........................
111
2 Square 62-96.5 suspension
modules in extruded aluminum with natural anodized finish • modules end caps in die-cast aluminum with silver powder coated finish • diffusers in frosted acrylic • 62” and 96.5” available overall lengths of complete luminaire • 61” and 95.5” ceiling cable mounting points • fully adjustable grip lock steel cable suspension fittings • ceiling canopies in silver powder coated finish • standardly equipped with 120V electronic ballasts with 277V and dimming options •
For additional 2 Square versions please refer to the 2007-2008 Artemide Master Catalog or visit our website artemide.us
61” 155 cm
95 1/2” 242.6 cm
hanging center
hanging center
max 72” max 183 cm
Cable suspended luminaires for linear direct or indirect fluorescent lighting.
max 72” max 183 cm
Ron Rezek 2009
overall length
overall length
62” 157.5 cm
96 1/2” 245 cm
2” 5 cm
2” 5 cm 2” 5 cm
2” 5 cm
2 Square 62 suspension
2 Square 96.5 suspension
fluorescent source direct • 1 x 54W (G5/T5 HO)..........................
fluorescent source direct • 2 x 39W (G5/T5 HO)..........................
fluorescent source indirect • 1 x 54W (G5/T5 HO)..........................
fluorescent source indirect • 2 x 39W (G5/T5 HO)..........................
9
eco
112
design
Cable suspended luminaires for linear direct, indirect, or direct + indirect fluorescent lighting. modules in extruded aluminum with natural anodized finish modules end caps in die-cast aluminum with silver powder coated finish • diffusers in frosted acrylic • 49”, 61”, and 95” available overall lengths of complete luminaire • 47.5”, 59.5”, and 93.5” ceiling cable mounting points • fully adjustable grip lock steel cable suspension fittings • ceiling canopies in silver powder coated finish • standardly equipped with 120V electronic ballasts with 277V and dimming options For additional 2.5 Square versions please refer to the 2007-2008 Artemide Master Catalog or visit our website artemide.us
47 1/2” 121 cm
59 1/2” 151 cm
hanging center
hanging center
max 72” max 183 cm
Ron Rezek 2009
max 72” max 183 cm
2.5 Square 49-61-95 suspension
overall length
overall length
49” 124.5 cm
61” 155 cm
2 1/2” 6.5 cm
• •
2 1/2” 6.5 cm 2 1/2” 6.5 cm
2 1/2” 6.5 cm
2.5 Square 49 suspension
2.5 Square 61 suspension
fluorescent source direct • 1 x 54W (G5/T5 HO)..........................
fluorescent source direct • 1 x 80W (G5/T5 HO)..........................
fluorescent source indirect • 1 x 54W (G5/T5 HO)..........................
fluorescent source indirect • 1 x 80W (G5/T5 HO)..........................
fluorescent source direct + indirect • 1 x 39W (G5/T5 HO).......................... + • 1 x 54W (G5/T5 HO)..........................
fluorescent source direct + indirect • 1 x 54W (G5/T5 HO).......................... + • 1 x 80W (G5/T5 HO)..........................
eco
design
max 72” max 183 cm
93 1/2” 237.5 cm hanging center
overall length 95” 241.3 cm
2 1/2” 6.5 cm 2 1/2” 6.5 cm
2.5 Square 95 suspension fluorescent source direct • 2 x 54W (G5/T5 HO).......................... fluorescent source indirect • 2 x 54W (G5/T5 HO).......................... fluorescent source direct + indirect • 2 x 39W (G5/T5 HO).......................... + • 2 x 54W (G5/T5 HO)..........................
113
Peak 52-64-100 suspension Paul Haigh 2009
Cable suspended luminaires for linear direct or direct + indirect fluorescent lighting. modules in extruded aluminum with natural anodized finish modules end caps in die-cast aluminum with silver powder coated finish • upper and lower diffusers in frosted acrylic • 52”, 64”, and 100” available overall lengths of complete luminaire • 48”, 60”, and 96” ceiling cable mounting points • fully adjustable grip lock steel cable suspension fittings • ceiling canopies in silver powder coated finish • standardly equipped with 120V electronic ballasts with 277V and dimming options • •
Peak down
eco
design
Peak up
114
96” 244 cm
hanging center
hanging center
hanging center
overall length
overall length
overall length
51 3/4” 131.5 cm
63 3/4” 162 cm
99 3/4” 253 cm
Peak up
Peak up
Peak up 4 3/4” 12 cm
4 3/4” 12 cm 3 3/4” 9.5 cm
4 3/4” 12 cm 3 3/4” 9.5 cm
3 3/4” 9.5 cm
60” 152.5 cm
96” 244 cm
hanging center
hanging center
hanging center
max 72” max 183 cm
48” 122 cm max 72” max 183 cm
max 72” max 183 cm
max 72” max 183 cm
60” 152.5 cm max 72” max 183 cm
max 72” max 183 cm
48” 122 cm
overall length
overall length
overall length
63 3/4” 162 cm
51 3/4” 131.5 cm
99 3/4” 253 cm
Peak down
Peak down
Peak down 4 3/4” 12 cm
4 3/4” 12 cm
4 3/4” 12 cm 3 3/4” 9.5 cm
3 3/4” 9.5 cm
o
Peak 52 suspension
Peak 64 suspension
Peak 100 suspension
fluorescent source direct peak up • 1 x 28W (G5/T5)................................ or • 2 x 28W (G5/T5)................................ or • 1 x 54W (G5/T5 HO).......................... or • 2 x 54W (G5/T5 HO)..........................
fluorescent source direct peak up 1 x 35W (G5/T5)................................ or • 2 x 35W (G5/T5)..................................
fluorescent source direct peak up • 2 x 28W (G5/T5)................................ or • 4 x 28W (G5/T5)................................ or • 2 x 54W (G5/T5 HO).......................... or • 4 x 54W (G5/T5 HO)..........................
fluorescent source dir. + ind. peak up • 2 x 28W (G5/T5)............................... or • 3 x 28W (G5/T5)................................ or • 2 x 54W (G5/T5 HO)......................... or • 3 x 54W (G5/T5 HO)......................... fluorescent source indirect peak down • 1 x 28W (G5/T5)............................... or • 2 x 28W (G5/T5)............................... or • 1 x 54W (G5/T5 HO)......................... or • 2 x 54W (G5/T5 HO)......................... fluorescent source ind. + dir. peak down • 2 x 28W (G5/T5)............................... or • 3 x 28W (G5/T5)............................... or • 2 x 54W (G5/T5 HO).......................... or • 3 x 54W (G5/T5 HO).........................
•
fluorescent source dir. + ind. peak up • 2 x 35W (G5/T5)................................ or • 3 x 35W (G5/T5)................................... fluorescent source indirect peak down • 1 x 35W (G5/T5)................................ or • 2 x 35W (G5/T5)................................. fluorescent source ind. + dir. peak down • 2 x 35W (G5/T5)................................ or • 3 x 35W (G5/T5).................................
3 3/4” 9.5 cm
fluorescent source dir. + ind. peak up • 4 x 28W (G5/T5)............................... or • 6 x 28W (G5/T5)................................ or • 4 x 54W (G5/T5 HO)......................... or • 6 x 54W (G5/T5 HO)......................... fluorescent source indirect peak down • 2 x 28W (G5/T5)............................... or • 4 x 28W (G5/T5)............................... or • 2 x 54W (G5/T5 HO)......................... or • 4 x 54W (G5/T5 HO)......................... fluorescent source ind. + dir. peak down • 4 x 28W (G5/T5)............................... or • 6 x 28W (G5/T5)............................... or • 4 x 54W (G5/T5 HO).......................... or • 6 x 54W (G5/T5 HO).........................
115
Rala 54-100 suspension hanging centers 44” 112 cm
Ron Rezek 2008 2
Cable suspended luminaires for linear indirect or indirect+direct linear fluorescent lighting with high output lamping and dimming options. module in extruded aluminum with natural anodized finish or low gloss white powder coated finish • module end caps in die-cast aluminum with silver or white powder coated finish • 54” or 100” luminaire available lengths (54” or 102” actual overall length) • direct lighting module diffuser in frosted acrylic • fully adjustable griplock steel cable suspension fittings • ceiling canopies in white or silver powder coated steel • standardly equipped with 120V electronic ballasts (277V optional), dimmable and non dimmable •
eco
design
Rala 100 indirect+direct, anodized
116
max 72” max 183 cm
overall lengths 54” 137 cm
hanging centers 92” 233.5 cm
max 72” max 183 cm
overall lengths 102” 259 cm 2 3/4” 7 cm
8” 20 cm
2 3/4” 7 cm 8” 20 cm
Rala 54 suspension indirect HO
Rala 100 suspension indirect HO
fluorescent source • 2 x 54W (G5/T5 HO).........................
fluorescent source • 4 x 54W (G5/T5 HO).........................
Rala 54 suspension indirect+direct
Rala 100 suspension indirect+direct
fluorescent source • 3 x 28W (G5/T5)...............................
fluorescent source • 6 x 28W (G5/T5)...............................
Rala 54 suspension indirect+direct HO
Rala 100 suspension indirect+direct HO
fluorescent source • 3 x 54W (G5/T5 HO).........................
fluorescent source • 6 x 54W (G5/T5 HO).........................
Rala 54 indirect, anodized
Rala 54 indirect+direct, white
Rala 54 indirect+direct, white
117
Scalene-Equilateral suspension
72” 183 cm
Peclar Nalbandian, Ron Rezek 2008
2 1/2” 6.5 cm overall width 22 1/2” 57 cm
2 1/2” 6.5 cm
Cable suspended architetural luminaires deriving from the 2.5 Square system.
2 1/2” 6.5 cm 2 1/2” 6.5 cm
view from bottom
diffused fluorescent lighting - direct, indirect, or direct + indirect • fully wired and assembled modules in extruded aluminum of 0.075” / .16 cm wall thickness, with natural anodized finish and corner connectors in die-cast aluminum • diffusers in frosted acrylic • aircraft cable suspension mounting assembly with fully adjustable grip lock fitting • electrical feed canopy mounting to standard electrical junction boxes • rigid stem suspension mounting optional • modules are standardly equipped with thermally protected, class P, high power factor 120V electronic ballasts, with 277V optional at no up-charge • for dimmable electronic ballast options, consult the local Artemide Sales Representative for applicable lamping changes and up-charges • for custom finishes, consult the local Artemide Sales Representative for minimum quantities and up-charges • luminaires are shipped fully assembled, with mounting points template for ease of ceiling installation
view from bottom
•
overall length 64” 163 cm overall sizes 28 1/2”, 40”, 52”, 63 3/4” 72, 102, 132, 162 cm
mounting center 48 1/2” 123 cm
mounting center 25” 64 cm view from top
mounting centers 25 1/4”, 36 3/4”, 48 3/4”, 60 1/4” 64, 93, 124, 153 cm
Scalene suspension
Equilateral 28 suspension
fluorescent source direct • 1 x 24W (G5/T5 HO)......................... + • 1 x 54W (G5/T5 HO)......................... + • 1 x 80W (G5/T5 HO).........................
fluorescent source direct • 3 x 24W (G5/T5 HO).........................
fluorescent source direct + indirect • 1 x 24W (G5/T5 HO)......................... + • 1 x 54W (G5/T5 HO)......................... + • 1 x 80W (G5/T5 HO)......................... + • 2 x 54W (G5/T5 HO).........................
design
view from top
mounting center 60 1/2” 154 cm
fluorescent source indirect • 1 x 24W (G5/T5 HO)......................... + • 1 x 54W (G5/T5 HO)......................... + • 1 x 80W (G5/T5 HO).........................
eco
72” 183 cm
fluorescent source indirect • 3 x 24W (G5/T5 HO)......................... Equilateral 40 suspension fluorescent source direct • 3 x 39W (G5/T5 HO)......................... fluorescent source indirect • 3 x 39W (G5/T5 HO)......................... fluorescent source direct + indirect • 3 x 39W (G5/T5 HO)......................... + • 3 x 24W (G5/T5 HO)......................... Equilateral 52 suspension fluorescent source direct • 3 x 54W (G5/T5 HO)......................... fluorescent source indirect • 3 x 54W (G5/T5 HO)......................... fluorescent source direct + indirect • 3 x 54W (G5/T5 HO)......................... + • 3 x 39W (G5/T5 HO)......................... Equilateral 64 suspension fluorescent source direct • 3 x 80W (G5/T5 HO)......................... fluorescent source indirect • 3 x 80W (G5/T5 HO)......................... fluorescent source direct + indirect • 3 x 80W (G5/T5 HO)......................... + • 3 x 54W (G5/T5 HO).........................
Equilateral
118
Scalene
Equilateral direct+indirect
Scalene direct
119
Dupla outdoor FLU ceiling single/double wall
ADA
ADA 4” 10 cm
4” 10 cm
4” 10 cm
4” 10 cm
Peclar Nalbandian, Ron Rezek 2009 15 1/2” 39 cm
Wall and ceiling mounted luminaires for diffused fluorescent lighting, suitable for applications in outdoor wet locations. body in die-cast aluminum with medium grey powder coated finish • diffuser in etched white handblown glass • fully gasketed, with hardware in stainless steel • 120V or 277V electronic ballast integrated in lampholder • mounting to standard electrical junction boxes • UL listed for wet locations
10” 25 cm
•
For additional Dupla versions please refer to the 2007-2008 Artemide Master Catalog or visit our website artemide.us
Dupla FLU wall
Dupla FLU double wall
fluorescent source • 1 x 18W (G24q-2/T4)..............................
fluorescent source • 2 x 13W (G24q-1/T4)..............................
4” 10 cm
4
4” 10 cm
17” 43 cm
eco
design
Dupla FLU ceiling fluorescent source • 1 x 18W (G24q-2/T4)..............................
ceiling FLU medium grey finish
120
double wall FLU medium grey finish
Lyra outdoor 11-14 wall/ceiling
ADA
ADA
4” 10 cm
Kolbe + Sekles 2009 4” 10 cm
Wall or ceiling mounted luminaires for direct and diffused incandescent or fluorescent lighting, suitable for applications in outdoor wet locations, available in two sizes. body composed of multi-layered discs of die-cast aluminum with outdoor type powder coated finish, matte white, black, or medium grey • diffuser in heavy pressed white etched glass with silicon gasket • concealed back plate in steel with white powder coated finish, mounting to standard junction boxes • all assembly hardware in stainless steel • UL listed for wet locations
ø 14” ø 36 cm
ø 11” ø 28 cm
•
For additional Lyra versions please refer to the 2007-2008 Artemide Master Catalog or visit our website artemide.us
eco
white
122
Lyra 11 ceiling/wall
Lyra 14 ceiling/wall
incandescent source • 1 x 60W (E26/A19)...................................
incandescent source • 2 x 60W (E26/A19)...................................
or
or
fluorescent source • 1 x 26W (G24q-3/T4)..............................
fluorescent source • 2 x 26W (G24q-3/T4)..............................
design
black
medium grey
123
ar tem i de. us Headquarters, National Sales & Customer Service Center, 1980 New Highway, Farmingdale, NY, 11735 T. 631-694-9292 • F. 631-694-9275 • Toll Free 1-877-Art-9111 • email: info@artemide.us Flagship Stores and Customer Service Centers • Online Store
128
A tl a n ta 1011 Monroe Dr. Atlanta, GA 30306 T 404-881-6567 F 404-881-6805 atlanta@artemide.us
B os to n 343 Congress St. Boston, MA 02210 T 617-423-1450 F 617-423-1451 boston@artemide.us
Ch i c a g o 223 West Erie St. 1S Chicago, IL 60654 T 312-475-0100 F 312-475-0112 chicago@artemide.us
D alla s Dallas Design District 1617 Hi Line Dr., Suite 470 Dallas, TX 75207 T 214-747-8344 F 214-747-1274 dallas@artemide.us
H on ol ul u 1250 Kapiolani Blvd. Honolulu, HI 96814 T 808-956-1250 F 808-956-1255 honolulu@artemide.us
L as Vegas 3901 West Russel Rd. Las Vegas, NV 89118 T 702-589-5747 F 702-616-0771 lasvegas@artemide.us
Lo s A n g e l e s 9006 Beverly Blvd. West Hollywood, CA 90048 T 310-888-4099 F 310-888-4098 losangeles@artemide.us
M iam i 277 Giralda Ave. Coral Gables, FL 33134 T 305-444-5800 F 305-444-5801 miami@artemide.us
M i nne a pol i s International Market Square 275 Market St. Minneapolis, MN 55405 T 612-340-5310 F 612-340-5311 minneapolis@artemide.us
N ew York 46 Greene Street New York, NY 10013 T 212-925-1588 F 212-925-2429 newyork@artemide.us
P hi l a d e l phi a 232 North 2nd St. Philadelphia, PA 19106 T 215-733-9877 F 215-733-9878 philadelphia@artemide.us
Ph oen ix (Area Sales Office Only) 3029 North Alma School Rd. 107-30 Chandler, AZ 85224 T/F 480-292-9077 M 480-208-3863 phoenix@artemide.us
S a n D i e go 301 4th Ave. San Deigo, CA 92101 T 619-232-6072 F 619-232-6208 sandiego@artemide.us
S a n F r a nc i s c o 855 Montgomery St. San Francisco, CA 94133 T 415-393-9955 F 415-393-9959 sanfrancisco@artemide.us
S e a tt l e 310 Occidental Ave. S. Seattle, WA 98104 T 206-903-1511 F 206-903-1541 seattle@artemide.us
S t . L o ui s 4727 McPherson Ave. St. Louis, MO 63108 T 314-361-0107 F 314-454-0112 stlouis@artemide.us
Wa sh ingt on , D .C . 415 8th Street NW Washington, D.C. 20004 T 202-783-0133 F 202-783-9144 washingtondc@artemide.us
T he A r te m i de O n l i ne S tore w ww.ar tem ides to re .c om
Artemide was founded by Ernesto Gismondi and Sergio Mazza in 1960. The ongoing commitment to research and technological innovation combined with the collaboration of the best designers from around the world joined with the ongoing advertising and outstanding relationship with the industry’s media firms have made Artemide the best known lighting brand in the world synonymous with Design, Light, and Made in Italy. In almost a half a century of business and entrepreneurial experiences, a surprising common characteristic is reviled. Artemide products do not conform to traditions, trends, fads, and a fashion at the moment. This rouge behavior defines the Artemide experience which is the exhausting desire to find solutions to the human demand for lighting, even if still unexpressed and unconscious. The individual is constantly placed at the center of the project. Formal and aesthetic needs, technological innovations, individual and collective talents have been, are, and always will be dedicated to this purpose. The Human Light: everywhere in the world, the light of Artemide for the wellness of man. For the complete and most up-to-date selection of Artemide, Artemide Architectural, and Rezek models, please visit our website @ artemide.us Please contact your local Sales Representative, Area Sales Manager, or your nearest Artemide Flagship Store to inquire about our Architectural binder which is available to architects, designers, and lighting professionals.
artemide.us