Poultry Feed Hammer Mill Water Drop Feed Hammer Mill Introduction Amisy water drop feed hammer mill is a machine aiming at crushing materials by the collision between the high-speed hammer and materials. It is suitable for milling raw materials like husks, maize, wheat, beans, peanut, etc. The special water-drop design of feed hammer mill can ensure a larger space for grinding chamber and improves working efficiency by 40%. It is a necessity in large and medium sized feed processing plants and factories.
Contact Information Yvonne Zhao Email: feedpelletmillmanufactu rer@gmail.com Web site: http://goo.gl/kybEO
Poultry Feed Hammer Mill Features 1. Special water-drop design, compact structure and beautiful appearance. 2. Advanced twice strike technology of the pulverizing chamber, good rigidity pedestal and small vibration. 3. New type feed hammer mill has automatic feeding device and it also can adjust the quantity of feeding automatically. 4. The water drop grinding chamber can avoid circulation and working efficiency is highly improved compared to other hammer mills. 5. A variety of sieve sizes are available to choose, flexible push and pull door design is convenient to operate and maintain. 6. International advanced energy conservation equipment, high capacity, low
consumption and stable performance. 7. Wide application range. Widely used for coarse grinding of raw materials in large and medium-sized poultry feed and food processing factories.
SDH-ZW60B
SDH-ZW80B
A
2000mm
2500mm
B
1100mm
1100mm
C
1300mm
1300mm
Poultry Feed Hammer Mill Working Principle Raw materials are fed from the top of a matched feeder, running through feeding plates on both sides to the grinding room. Under the force of adjustable rotating hammers and friction between screen plates, raw materials are grinded. Then the materials are discharged from the outlet by the push forced by air circulation. Contact Information Yvonne Zhao Email: feedpelletmillmanufacturer@gmail.com Web site: http://goo.gl/kybEO
Poultry Feed Hammer Mill Technical Parameters
Model
AMS-ZW-29C
AMS-ZW-38C
AMS-ZW-50C
Rotor Diameter
1120 mm
1120 mm
1120 mm
Spindle speed
1480 rpm
1480 rpm
1480 rpm
Linear velocity of hammer blades
86.5 m/s
86.5 m/s
86.5 m/s
Grinding room width
290 mm
380 mm
500 mm
Hammer blade quantity
54
64
90
Power
55 kw
75 kw
90 kw
110 kw
132 kw
160 kw
Coarse Smash Normal 42 46 55 61 73 80 air M3/min M3/min M3/min M3/min M3/min M3/min Fine Smash Normal 55 60 72 78 95 102 air M3/min M3/min M3/min M3/min M3/min M3/min Output(t/h)
9 t/h
12 t/h
15 t/h
Contact Information Yvonne Zhao Email: feedpelletmillmanufacturer@gmail.com Web site: http://goo.gl/kybEO
18 t/h
22 t/h
26 t/h