Volkswagen Crafter by Avidly Agency

Technical Data Valid for model year 2013

Commercial Vehicles

The Crafter

Tästä esitteestä löydät Crafter-malliston tekniset tiedot ja mittapiirrokset. Esite on englanninkielinen. Tiedot perustuvat kansainväliseen myyntiohjelmaan. Esite saattaa sisältää malleja ja moottoreita, jotka eivät kuulu Suomen tuontiohjelmaan. Suomeen tuotavat mallit löydät hinnastosta. Oikeudet muutoksiin pidätetään. Toukokuu 2013

Information on fuel consumption and CO2 emissions can be found within the technical data. Not all combinations of engine, gearbox and auto body design are possible. Please discuss your individual requirements with your Volkswagen Commercial Vehicles dealer. Only your Volkswagen Commercial Vehicles dealer is able to check the necessary combination requirements as well as verify the accuracy and completeness of data in the purchasing system. The payloads listed here have been established allowing for factory options or other tailored solutions that are not included in the standard scope of delivery and services. The actual payload of a vehicle, which is calculated by the difference between the gross vehicle weight and the curb weight, can only be established by weighing the individual vehicle. The product name Caddy® is a registered brand name of Caddie S.A. and is used by Volkswagen Commercial Vehicles with the kind approval of Caddie S.A. TDI®, DSG®, Shiftmatic®, 4MOTION® and BlueMotion® are registered brand names of Volkswagen AG and other companies in the Volkswagen Group in Germany as well as in other countries. The fact that a brand name in this document is not marked with ® does not mean that it is not a registered brand name and/or that this brand name may be used without the written approval of the Volkswagen AG. Not all brand names mentioned are necessarily a part of these technical details. Our vehicles are equipped with summer tyres as standard. As of the 12.04.2010, in the Federal Republic of Germany you are legally oblieged to equipe your vehicle in icy conditions, packed snow, slash, ice or hoar frost with winter tyres or all seasons tyres. Please contact your Volkswagen Commercial Vehicles dealer for assistance. Take-back and recycling of end of life vehicles: Volkswagen meets the challenges of modern society and takes them into consideration in all new products of the Volkswagen brand. This naturally also applies to protection of the environment and resources. All new Volkswagens can therefore be recycled in an environment-friendly way and can be returned free of charge, subject to fulfilment of national legislation. For details concerning take-back and recycling of end of life vehicles, please contact your local Volkswagen dealer, refer to the Internet on www.volkswagen.de or call the hotline +49 800 - Volkswagen (+49 800 865 579 2436), free for callers in Germany. The data provided in this data sheet is in accordance with the information available at the time of going to print and are based on the features of the German market. Your Volkswagen dealer can provide you with information on country-specific differences. Subject to change without notice.

02 – General information – The Crafter

Fuel consumption and CO2 emissions for Crafter models with emission standard EEV1) (stricter than EURO V). With manual gearbox2), fuel consumption (litres/100 km) and combined CO2 emissions (g/km), fuel tank capacity approx. 75 litres Engine

2.0 l TDI (80 kW)

Rear-axle ratio

3.923:1

2.0 l TDI (105 kW)

2.0 l TDI (120 kW)

4.182:13)

4.364:1

3.923:1

4.182:13)

4.364:1

3.692:1

3.923:13)

4.182:1

Crafter 30/35 Delivery Van urban

9.4 – 9.4

10.1 – 10.6

10.8 – 11.3

9.2 – 9.2

9.9 – 10.2

10.6 – 11.1

8.9 – 9.0

9.2 – 9.2

9.9 – 10.2

extra-urban

7.7 – 8.1

7.8 – 7.9

8.1 – 8.3

7.5 – 7.9

7.6 – 7.8

7.9 – 8.1

7.3 – 7.7

7.5 – 7.9

7.6 – 7.8

combined

8.3 – 8.6

8.6 – 8.9

9.1 – 9.4

8.1 – 8.4

8.4 – 8.7

8.9 – 9.2

7.9 – 8.2

8.1 – 8.4

8.4 – 8.7

CO2 emissions combined

218 – 226

226 – 234

239 – 247

213 – 221

221 – 229

234 – 242

208 – 216

213 – 221

221 – 229

Crafter 30/35 Delivery Van with start/stop system

urban

9.6 – 10.0

10.3 – 10.7

9.2 – 9.5

10.1 – 10.5

8.7 – 8.7

9.2 – 9.5

extra-urban

7.6 – 7.9

7.9 – 8.1

7.5 – 7.8

7.7 – 8.1

7.3 – 7.7

7.5 – 7.8

combined

8.3 – 8.6

8.8 – 9.1

8.1 – 8.4

8.6 – 8.9

7.8 – 8.1

8.1 – 8.4

CO2 emissions combined

218 – 227

231 – 239

213 – 221

226 – 234

205 – 213

213 – 221

Crafter 30/35 Delivery Van with BlueMotion Technology urban

8.6 – 8.9

8.7 – 8.7

8.2 – 8.5

extra-urban

7.7 – 7.9

7.3 – 7.7

7.3 – 7.5

combined

8.0 – 8.3

7.8 – 8.1

7.6 – 7.9

CO2 emissions combined

210 – 218

205 – 213

200 – 208

With Shiftmatic2), fuel consumption (litres/100 km) and combined CO2 emissions (g/km), fuel tank capacity approx. 75 litres Engine

2.5 l BlueTDI (100 kW)

Rear-axle ratio

4.182:13)

4.364:1

Crafter 30/35 Delivery Van urban

10.3

10.6

extra-urban

8.5

8.7

combined

9.1

9.4

CO2 emissions combined

240

247

1) “Enhanced Environmentally Friendly Vehicle”, the figures established are below the limits set by the EURO V emission standard. 2) Figures are not available for Crafter 50. 3) Standard rear-axle ratio. 4) Start/stop system available as an optional extra. The fuel consumption and emission values listed here have been established in accordance with the measuring method stipulated (ECE-R 101). CO2 emissions arising from the production and provision of fuel and/or other energy sources are not taken into consideration when determining the CO2 emissions in accordance with directive 1999/94/EC. These figures do not refer to the particular vehicle and do not constitute part of the offer but are purely for comparison purposes between the various types of vehicle. In addition to the fuel efficiency of a vehicle, driving behaviour as well as other non-technical factors play a role in determining a vehicle’s fuel consumption and CO2 emissions. CO2 is the main greenhouse gas responsible for global warming.

– Fuel consumption and CO2 emissions for Crafter models with emission standard The Crafter EEV (stricter – Fuelthan consumption EURO V)and – The CO2Crafter emissions for Crafter models with emission standard EEV (stricter than EURO V) –

Fuel consumption, CO2 emissions and efficiency categories Crafter 4MOTION. With manual gearbox1), fuel consumption (litres/100 km) and combined CO2 emissions (g/km), fuel tank capacity approx. 75 litres Engine

2.0 l TDI (120 kW)

Rear-axle ratio

4.111:1 (Crafter 4MOTION with Achleitner four-wheel drive)

Crafter 35 Delivery Van (emission standard EEV2) [stricter than EURO V]) urban

10.2

extra-urban

7.8

combined

8.7

CO2 emissions combined

229

Crafter 35 Kombi (emission standard EEV2) [stricter than EURO V]) urban

10.2

extra-urban

7.8

combined

8.7

CO2 emissions combined

229

efficiency category with normal roof, short wheelbase/medium wheelbase/–

C/C/–

efficiency category with high roof, –/medium wheelbase/long wheelbase

–/C/C

1) Figures are not available for Crafter 50. 2) “Enhanced Environmentally Friendly Vehicle”, the figures established are below the limits set by the EURO V emission standard. The fuel consumption and emission values listed here have been established in accordance with the measuring method stipulated (ECE-R 101). CO2 emissions arising from the production and provision of fuel and/or other energy sources are not taken into consideration when determining the CO2 emissions in accordance with directive 1999/94/EC. These figures do not refer to the particular vehicle and do not constitute part of the offer but are purely for comparison purposes between the various types of vehicle. In addition to the fuel efficiency of a vehicle, driving behaviour as well as other non-technical factors play a role in determining a vehicle’s fuel consumption and CO2 emissions. CO2 is the main greenhouse gas responsible for global warming. Note in accordance with the currently valid version of directive 1999/94/EC: A guide on the official fuel consumption and the official specific CO2 emissions and power consumption for all new passenger car models is available free of charge at every point of sale in the European Union and, for prospective buyers in Germany, at DAT Deutsche Automobil Treuhand GmbH, Hellmuth-Hirth-Strasse 1, 73760 Ostfildern. Efficiency categories evaluate vehicles based on CO2 emissions while taking the unladen weight of the vehicle into consideration. Vehicles that comply with the average are classified as D. Vehicles that are above the current average are classified as A+, A, B or C. Vehicles that are below average are characterised as E, F or G.

– Fuel consumption, CO2 emissions and efficiency categories Crafter 4MOTION – The Crafter

The Crafter – Fuel consumption, CO2 emissions and efficiency categories Crafter 4MOTION –

Fuel consumption and CO2 emissions for Crafter models with emission standard Euro 5. With manual gearbox1), fuel consumption (litres/100 km) and combined CO2 emissions (g/km), fuel tank capacity approx. 75 litres Engine

2.0 l TDI (80 kW)

Rear-axle ratio

3.923:1

4.182:12)

2.0 l TDI (100 kW)

4.364:1

3.923:1

4.182:12)

2.0 l TDI (120 kW)

4.364:1

3.692:1

3.923:12)

4.182:1

Crafter 30 Delivery Van BlueMotion (with short wheelbase and normal roof) urban

7.9 – 8.0

extra-urban

6.5 – 6.6

combined

7.0 – 7.1

CO2 emissions combined

184 – 187

Crafter 30/35 Delivery Van (only models with a maximum unladen weight of 2,815 kg incl. conversions) urban

9.1 – 9.4

10.1 – 10.7

10.5 – 10.8

9.1 – 9.4

10.1 – 10.7

10.5 – 10.8

8.7 – 9.0

9.0 – 9.2

9.9 – 10.3

extra-urban

7.9 – 8.1

7.8 – 7.9

8.4 – 8.6

7.9 – 8.1

7.8 – 7.9

8.4 – 8.6

7.5 – 7.7

7.6 – 7.9

7.6 – 7.8

combined

8.3 – 8.6

8.6 – 8.9

9.1 – 9.4

8.3 – 8.6

8.6 – 8.9

9.1 – 9.4

7.9 – 8.2

8.1 – 8.4

8.4 – 8.7

CO2 emissions combined

218 – 226

226 – 234

239 – 247

218 – 226

226 – 234

239 – 247

208 – 216

213 – 221

221 – 229

Crafter 30/35 Delivery Van with start/stop system (only models with a maximum unladen weight of 2,815 kg incl. conversions) 3)

urban

9.6 – 10.0

10.0 – 10.3

9.6 – 10.0

10.0 – 10.3

8.4 – 8.7

9.4 – 9.6

extra-urban

7.6 – 7.7

8.2 – 8.4

7.6 – 7.7

8.2 – 8.4

7.5 – 7.7

7.4 – 7.7

combined

8.3 – 8.6

8.8 – 9.1

8.3 – 8.6

8.8 – 9.1

7.8 – 8.1

8.1 – 8.4

CO2 emissions combined

218 – 226

231 – 239

218 – 226

231 – 239

205 – 213

213 – 221

Crafter 30/35 Delivery Van with BlueMotion Technology (only models with a maximum unladen weight of 2,815 kg incl. conversions) urban

8.6 – 8.9

8.2 – 8.5

extra-urban

7.7 – 7.9

7.3 – 7.5

combined

8.0 – 8.3

7.6 – 7.9

CO2 emissions combined

210 – 218

199 – 208

1) Figures are not available for Crafter 50. 2) Standard rear-axle ratio. 3) Start/stop system available as an optional extra. The fuel consumption and emission values listed here have been ascertained in accordance with the measuring method stipulated (the version of the EC directive 715/2007 which is currently valid). CO2 emissions arising from the production and provision of fuel and/or other energy sources are not taken into consideration when determining the CO 2 emissions in accordance with directive 1999/94/EC. These figures do not refer to a particular vehicle and do not constitute part of the offer but are purely for comparison purposes between the various types of vehicle. In addition to the fuel efficiency of a vehicle, driving behaviour as well as other non-technical factors play a role in determining a vehicle’s fuel consumption and CO2 emissions. CO2 is the main greenhouse gas responsible for global warming.

– Fuel consumption and CO2 emissions for Crafter models with emission standard Euro 5 – TheThe Crafter Crafter – Fuel consumption and CO2 emissions for Crafter models with emission standard Euro 5 –

Fuel consumption, CO2 emissions and efficiency categories for Crafter models with emission standard Euro 5. With manual gearbox, fuel consumption (litres/100 km) and combined CO2 emissions (g/km), fuel tank capacity approx. 75 litres Engine

2.0 l TDI (80 kW)

Rear-axle ratio

3.923:1

4.182:11)

2.0 l TDI (100 kW)

4.364:1

3.923:1

4.182:11)

2.0 l TDI (120 kW)

4.364:1

3.692:1

3.923:11)

4.182:1

Crafter 30/35 Kombi urban

9.0

9.9

10.2

9.0

9.9

10.2

8.5

8.9

9.4

extra-urban

7.3

7.2

7.9

7.3

7.2

7.9

6.9

7.0

7.2

combined

7.9

8.2

8.7

7.9

8.2

8.7

7.5

7.7

8.0

CO 2 emissions combined

208

216

229

208

216

229

197

203

210

efficiency category for Crafter 30 with normal roof, short wheelbase/ medium wheelbase/–

D/D/–

E/E/–

D/D/–

E/E/–

D/D/–

efficiency category for Crafter 35 with normal roof, short wheelbase/ medium wheelbase/–

D/D/–

E/D/–

E/E/–

D/D/–

E/D/–

E/E/–

D/D/–

efficiency category for Crafter 30 with high roof, –/medium wheelbase/–

–/D/–

–/E/–

–/D/–

–/E/–

–/C/–

–/D/–

efficiency category for Crafter 35 with high roof, –/medium wheelbase/long wheelbase

–/D/C

–/D/D

–/E/D

–/D/C

–/D/D

–/E/D

–/C/C

–/D/C

9.4

9.7

9.4

9.7

8.3

8.7

Crafter 30/35 Kombi with start/stop system

urban extra-urban

7.0

7.7

7.0

7.7

6.9

7.2

combined

7.9

8.4

7.9

8.4

7.4

7.7

CO2 emissions combined

208

221

208

221

195

203

Crafter 30/35 Kombi with BlueMotion Technology urban

8.3

8.0

extra-urban

7.1

6.7

combined

7.6

7.2

199

189

CO2 emissions combined

199

efficiency category for Crafter 30 with normal roof, short wheelbase/ medium wheelbase/–

D/D/–

E/E/–

D/D/–

E/E/–

C/C/–

D/C/–

D/D/–

efficiency category for Crafter 35 with normal roof, short wheelbase/ medium wheelbase/–

D/D/–

E/E/–

D/D/–

E/E/–

C/C/–

D/C/–

D/D/–

efficiency category for Crafter 30 with high roof, –/medium wheelbase/–

–/D/–

–/E/–

–/D/–

–/E/–

–/C/–

–/D/–

efficiency category for Crafter 35 with high roof, –/medium wheelbase/long wheelbase

–/C/C

–/D/C

–/E/D

–/C/C

–/D/C

–/E/D

–/C/B

–/C/C

–/D/C

1) Standard rear-axle ratio. 2) Start/stop system available as an optional extra. The values listed here have been ascertained in accordance with the measuring method stipulated (§ 2 Nrs. 5, 6, 6a of the German energy labeling directive for cars in the currently valid version). CO 2 emissions arising from the production and provision of fuel and/or other energy sources are not taken into consideration when determining the CO2 emissions in accordance with directive 1999/94/EC. These figures do not refer to a particular vehicle and do not constitute part of the offer but are purely for comparison purposes between the various types of vehicle. In addition to the fuel efficiency of a vehicle, driving behaviour as well as other non-technical factors play a role in determining a vehicle’s fuel consumption and CO2 emissions. CO2 is the main greenhouse gas responsible for global warming. Note in accordance with the currently valid version of directive 1999/94/EC: A guide on the official fuel consumption and the official specific CO2 emissions and power consumption for all new passenger car models is available free of charge at every point of sale in the European Union and, for prospective buyers in Germany, at DAT Deutsche Automobil Treuhand GmbH, Hellmuth-Hirth-Strasse 1, 73760 Ostfildern. Efficiency categories evaluate vehicles based on CO 2 emissions while taking the unladen weight of the vehicle into consideration. Vehicles that comply with the average are classified as D. Vehicles that are above the current average are classified as A+, A, B or C. Vehicles that are below average are characterised as E, F or G.

Engines. Diesel engines

2.0 l TDI engine (80 kW)

2.0 l TDI engine (100 kW) (only with Crafter 30/35)

Mixture preparation/injection method

common rail direct injection

No. of cylinders

Cubic capacity, cm3

1,968

1,968 100 at 3,500

Output, kW at rpm

80 at 3,500

Max. torque, Nm/rpm

300/1,500 – 2,250

340/1,575 – 2,250

EU exhaust emission directive

EEV1) according to regulation 2005/55/EC, version 2008/74/EC or according to EC regulation 715/2007 Euro 5 respectively2)

according to EC regulation 715/2007 Euro 52)

Diesel particulate filter (DPF)

standard

6-speed manual gearbox

standard

Rear-wheel drive

standard

Type of fuel

diesel, in accordance with DIN EN 590

Diesel engines

2.5 l BlueTDI engine (100 kW)

2.0 l TDI engine (105 kW)

Mixture preparation/injection method

common rail direct injection

BiTurbo common rail direct injection

No. of cylinders

Cubic capacity, cm3

2,461

1,968 105 at 3,500

100 at 3,500 330/2,000

340/1,575 – 2,250

EU exhaust emission directive

EEV1) according to regulation 2005/55/EC, version 2008/74/EC

Diesel particulate filter (DPF)

standard

6-speed manual gearbox/6-speed Shiftmatic

–/standard

standard/–

Rear-wheel drive

standard

Type of fuel

diesel, in accordance with DIN EN 590

Diesel engine

2.0 l TDI engine (120 kW)

Mixture preparation/injection method

BiTurbo common rail direct injection

No. of cylinders

Cubic capacity, cm3

1,968

Output, kW at rpm

120 at 3,600

Max. torque, Nm/rpm

400/1,800

EU exhaust emission directive

EEV1) according to regulation 2005/55/EC, version 2008/74/EC or according to EC regulation 715/2007 Euro 5 respectively2)

Diesel particulate filter (DPF)

standard

6-speed manual gearbox

standard

Rear-wheel drive

standard

Type of fuel

diesel, in accordance with DIN EN 590

40 20

60 40 20

80 330 Nm 60 40 20

400 350 300 250 200 150 100 50

120 kW

105 kW

100 kW

100

120 105 kW 100 80

340 Nm

60 40 20

400 350 300 250 200 150 100 50

output [kW]

340 Nm

400 350 300 250 200 150 100 50

100 kW

2.0 l TDI (EEV)

140

torque [Nm]

2.5 l BlueTDI (EEV)

120

output [kW]

300 250 200 150 100 50

100

140

torque [Nm]

300 Nm

100 kW

output [kW]

80 kW

torque [Nm]

output [kW]

100

2.0 l TDI (Euro 5)

140 120

torque [Nm]

2.0 l TDI (EEV/Euro 5)

100 kW

140 120

output [kW]

80 kW

Output, kW at rpm Max. torque, Nm/rpm

140

2.0 l TDI (EEV/Euro 5) 120 kW

120 100 80

400 Nm

60 40 20

1000 2000 3000 4000 5000

engine speed [rpm]

400 350 300 250 200 150 100 50

torque [Nm]

1) “Enhanced Environmentally Friendly Vehicle”, the figures established are below the limits set by the EURO V emission standard. 2) Road tax ratings in Germany are in accordance with the code numbers laid down by the Federal Motor Transport Authority. 3) Not available for Crafter Kombi.

– Engines – The Crafter

The Crafter – Engines –

Top speeds.

With manual gearbox Model

Engine

Output (kW)

Top speeds (kph) with rear-axle ratio 3.692:1

3.923:1

4.182:1

4.364:1

4.727:1

5.1:1

Delivery Van with normal roof or high roof Crafter 30/35

Crafter 503)

2.0 l TDI

1491)

1472)

145

2.0 l TDI

100

1561)

1542)

152

2.0 l TDI

105

158

156

154

2.0 l TDI

120

1602)

157

2.0 l TDI

1351)

1332)

2.0 l TDI

105

142

1402)

2.0 l TDI

120

1601)

154

152

150

144

Delivery Van with super-high roof Crafter 35

Crafter 503)

2.0 l TDI

1431)

1412)

139

2.0 l TDI

100

1491)

1472)

145

2.0 l TDI

105

151

149

147

2.0 l TDI

120

1562)

153

2.0 l TDI

1311)

1292)

2.0 l TDI

105

137

1352)

2.0 l TDI

120

1581)

1481)

1462)

144

138

Kombi with normal roof or high roof Crafter 30/35

2.0 l TDI

1491)

1472)

145

2.0 l TDI

100

1561)

1542)

152

2.0 l TDI

120

160

157

Engine

Output (kW)

Top speeds (kph) with rear-axle ratio 4.182:1

4.364:1

1542)

150

With Shiftmatic Model

4.727:1

5.1:1

138

1352)

134

1312)

Delivery Van with normal roof Crafter 30/35

2.5 l BlueTDI

100

Crafter 50

2.5 l BlueTDI

100

Delivery Van with high roof or super-high roof (super-high roof not for Crafter 30) Crafter 30/35

2.5 l BlueTDI

100

Crafter 50

2.5 l BlueTDI

100

1502)

146

1) Standard rear-axle ratio for Crafter Delivery Van BlueMotion (only for Crafter 30 with normal roof and 80 kW or 100 kW) as well as BlueMotion Technology. 2) Standard rear-axle ratio. 3) The maximum speeds shown here refer to non-deactivated vehicles. For deactivated vehicles, the maximum speed is 90 kph.

– Top speeds – The Crafter

The Crafter – Top speeds –

Weights.

Model/ Gross vehicle weight (kg)

Wheelbase (mm)

Unladen weight with driver (kg)1) from – to

Payload (kg)1) from – to

Axle load limit front/rear (kg)

Gross train weight 12 % gradient (kg)2)

1,904 – 2,075

1,096 – 925

1,650/1,800

5,000

1,904 – 2,319

1,096 – 681

1,650/1,800

5,000

1,917 – 2,485

1,583 – 1,015

1,6503)/2,250

5,300 – 6,300

1,972 – 2,319

1,028 – 681

1,650/1,800

5,000

Crafter 35 3,500

1,985 – 2,574

1,515 – 926

1,6503)/2,250

5,300 – 7,0004)

Crafter 50 5,000

2,265 – 2,954

2,735 – 2,046

1,8505)/3,500

7,000 – 8,0004)

2,008 – 2,319

992 – 681

1,650/1,800

5,000

Crafter 35 3,500

2,021 – 2,610

1,479 – 890

1,6503)/2,250

5,300 – 7,0004)

Crafter 50 5,000

2,301 – 2,990

2,699 – 2,010

1,8505)/3,500

7,000 – 8,0004)

2,155 – 2,772

1,345 – 728

1,6503)/2,250

5,300 – 7,0004)

2,467 – 3,184

2,533 – 1,816

1,8505)/3,500

7,000 – 8,0004)

2,207 – 2,819

1,293 – 681

1,6503)/2,250

5,300 – 6,3004)

2,514 – 3,259

2,486 – 1,741

1,8505)/3,500

7,000 – 8,0004)

2,057 – 2,646

1,443 – 854

1,6503)/2,250

5,300 – 7,0004)

2,337 – 3,026

2,663 – 1,974

1,8505)/3,500

7,000 – 8,0004)

2,182 – 2,799

1,318 – 701

1,6503)/2,250

5,300 – 7,0004)

2,494 – 3,211

2,506 – 1,789

1,8505)/3,500

7,000 – 8,0004)

2,235 – 2,819

1,265 – 681

1,6503)/2,250

5,300 – 6,3004)

2,542 – 3,287

2,458 – 1,713

1,8505)/3,500

7,000 – 8,0004)

Delivery Van BlueMotion with normal roof Crafter 30 3,000

3,250

Delivery Van with normal roof Crafter 30 3,000

3,250

Crafter 35 3,500 Crafter 30 3,000

3,665

Delivery Van with high roof Crafter 30 3,000

Crafter 35 3,500

3,665

4,325

Crafter 50 5,000 Crafter 35 3,500

4,325 with overhang

Crafter 50 5,000 Delivery Van with super-high roof Crafter 35 3,500

3,665

Crafter 50 5,000 Crafter 35 3,500

4,325

Crafter 50 5,000 Crafter 35 3,500 Crafter 50 5,000

4,325 with overhang

1) Equipment can result in an increase/decrease in the unladen weight and consequently affect the payload. Please consult your Volkswagen Commercial Vehicle partner. 2) Depending on the combination of engine, final drive ratio and tow bar. 3) Depending on the equipment, the front axle load limit may increase to 1,800 kg. This can affect the minimum payload. 4) Only possible in conjunction with tow bar with increased trailer load limit (optional extra). 5) Depending on the equipment, the front axle load limit may increase to 2,000 kg. This can affect the minimum payload. For commercial use: in accordance with EU directive 3820/85, a tachograph is stipulated by law as of a gross train weight of 3.5 tonnes. Retrofitting of a tachograph is possible on all vehicles (standard at Crafter 50). The payloads listed here have been established allowing for factory options or other tailored solutions that are not included in the standard scope of delivery and services. The actual payload of a vehicle, which is calculated by the difference between the gross vehicle weight and the curb weight, can only be established by weighing the individual vehicle.

– Weights – The Crafter

The Crafter – Weights –

Weights.

Model/ Gross vehicle weight (kg)

Wheelbase (mm)

Unladen weight with driver (kg)1)

Payload (kg)1)

Axle load limit front/rear (kg)

Gross train weight 12 % gradient (kg)2)

3,250

1,976 – 2,739

1,214 – 451

1,6503)/1,800

5,190

1,976 – 2,783

1,524 – 717

1,6503)/2,250

5,500 – 6,300

2,005 – 2,739

1,185 – 451

1,6503)/1,800

5,190

2,028 – 2,801

1,472 – 699

1,6503)/2,250

5,500 – 7,0004)

2,041 – 2,739

1,149 – 451

1,6503)/1,800

5,190

2,064 – 2,815

1,436 – 685

1,6503)/2,250

5,500 – 7,0004)

2,219 – 2,815

1,281 – 685

1,6503)/2,250

5,500 – 7,0004)

Kombi with normal roof Crafter 30 3,190 Crafter 35 3,500 Crafter 30 3,190

3,665

Crafter 35 3,500 Kombi with high roof Crafter 30 3,190

3,665

Crafter 35 3,500 Crafter 35 3,500

4,325

Roof load limits

Trailer nose weights

Model

Roof load limit (kg)

Trailer nose weight (kg)

With trailer nose limit (kg)

300

100

2,000

150

120

2,800/3,000

140

3,500

Delivery Van and Kombi Normal roof High roof Super-high roof

1) Equipment can result in an increase/decrease in the unladen weight and consequently affect the payload. Please consult your Volkswagen Commercial Vehicle partner. 2) Depending on the combination of engine, final drive ratio and tow bar. 3) Depending on the equipment, the front axle load limit may increase to 1,800 kg. This can affect the minimum payload. 4) Only possible in conjunction with tow bar with increased trailer load limit (optional extra). 5) There is no factory provision for a specific roof load on vehicles with a super high roof For commercial use: in accordance with EU directive 3820/85, a tachograph is stipulated by law as of a gross train weight of 3.5 tonnes. Retrofitting of a tachograph is possible on all vehicles (standard at Crafter 50). The payloads listed here have been established allowing for factory options or other tailored solutions that are not included in the standard scope of delivery and services. The actual payload of a vehicle, which is calculated by the difference between the gross vehicle weight and the curb weight, can only be established by weighing the individual vehicle.

– Weights – The Crafter

The Crafter – Weights –

Dimensions and weights Crafter 4MOTION.

Model/ feature

Crafter 35 4MOTION with Achleitner four-wheel drive (Delivery Van, Kombi)

Crafter 50 4MOTION with Achleitner four-wheel drive (Delivery Van)

Wheelbase (mm)

3,250

3,665

4,325

4,325 with overhang

3,665

4,325

4,325 with overhang

Ground clearance front axle (mm)

280

Ground clearance transfer case (mm)

300

295

Ground clearance rear axle (mm)

from approx. 240 –269

from approx. 246 –268

Axle load limit (front/rear) (kg)

1,800/2,250

2,000/3,500

Trailer weight braked (kg)/ unbraked (kg)

2,000 –2,800/ 750

2,000 –3,500/ 750

Gross train weight at 12 % gradient (kg)

5,300 – 6,300

5,300 – 7,000*

7,000 – 8,000*

Wading depth (mm)

600

Chassis elevation 4 x 4 (mm)

100

Rear-axle ratio, ex factory/Achleitner

4.182/4.111

4.364 or 4.727 (optional)/ 4.375 or 4.857 (optional)

Auxiliary drive

an auxiliary drive on the main gear is possible

*Only possible in conjunction with tow bar with increased trailer load limit (optional extra). For commercial use: in accordance with EU directive 3820/85, a tachograph is stipulated by law as of a gross train weight of 3.5 tonnes. Retrofitting of a tachograph is possible on all vehicles (standard at Crafter 50).

– Dimensions and weights Crafter 4MOTION – The Crafter

The Crafter – Dimensions and weights Crafter 4MOTION –

Gross train weights and trailer load limits.

With manual gearbox Model

Engine

Output (kW)

Gross train weight/trailer load limit (kg) with rear-axle ratio 3.692:1

3.923:1

4.182:1

4.364:1

4.727:1

5.1:1

Delivery Van with normal roof, high roof or super-high roof (super-high roof not for Crafter 30) Crafter 30

Crafter 35

2.0 l TDI

5,0001)/2,0001)

5,0002)/2,0002)

5,000/2,000

2.0 l TDI

100

5,0001)/2,0001)

5,0002)/2,0002)

5,000/2,000

2.0 l TDI

105

5,000 /2,000

5,000/2,000

2.0 l TDI

120

5,0002)/2,0002)

5,000/2,000

2.0 l TDI

5,5001)/2,0001)

5,5002)/2,0002)

5,500/2,000

5,0001)/2,0001)

6,3003)/2,8003) 7,0003)/3,5003) 2.0 l TDI

100

5,500 /2,000 1)

5,500 /2,000

5,500/2,000 6,3003)/2,8003) 7,0003)/3,5003)

2.0 l TDI

105

5,500 /2,000 1)

5,500 /2,000

5,500/2,000 6,3003)/2,8003) 7,0003)/3,5003)

2.0 l TDI

120

5,3001)/2,0001)

5,5002)/2,0002) 6,300

2), 3)

/2,800

5,500/2,000 2), 3)

6,3003)/2,8003) 7,0003)/3,5003)

Crafter 50

2.0 l TDI

7,0001)/2,0001)

7,0002)/2,0002)

7,000 /3,000

1), 3)

7,0002)/3,0002), 3)

7,0001)/3,5001), 3)

7,0002)/3,5002), 3)

7,000 /2,000

7,0002)/2,0002)

2.0 l TDI

105

7,0001)/3,0001), 3)

7,0002)/3,0002), 3)

7,000 /3,500

7,0002)/3,5002), 3)

2.0 l TDI

120

7,0001)/2,0001)

7,0002)/2,0002)

7,000 /3,000

1), 3)

7,000 /3,500

1), 3)

1) 1)

7,500

2), 3)

7,500

2), 3)

1), 3)

7,000/2,000

/3,000

2), 3)

/3,500

2), 3)

7,000/2,000

8,000 /3,000

8,0003)/3,0003)

8,000 /3,500

8,0003)/3,5003)

3) 3)

Kombi with normal roof or high roof Crafter 30

Crafter 35

2.0 l TDI

5,1901)/2,0001)

5,1902)/2,0002)

5,190/2,000

2.0 l TDI

100

5,1901)/2,0001)

5,1902)/2,0002)

5,190/2,000

2.0 l TDI

120

5,190 /2,000

5,190/2,000

2.0 l TDI

5,500 /2,000

5,5002)/2,0002)

5,190 /2,000 1)

5,500/2,000 6,3003)/2,8003) 7,0003)/3,5003)

2.0 l TDI

100

5,500 /2,000 1)

5,500 /2,000

5,500/2,000 6,3003)/2,8003) 7,0003)/3,5003)

2.0 l TDI

120

5,5001)/2,0001)

5,5002)/2,0002) 6,300

2), 3)

/2,800

5,500/2,000 2), 3)

7,0003)/2,8003) 7,0003)/3,5003)

1) Standard rear-axle ratio for Crafter Delivery Van BlueMotion (only for Crafter 30 with normal roof and 80 kW or 100 kW) as well as BlueMotion Technology. 2) Standard rear-axle ratio. 3) In conjunction with tow bar with increased trailer load limit (optional extra).

– Gross train weights and trailer load limits – The Crafter

The Crafter – Gross train weights and trailer load limits –

Gross train weights and trailer load limits.

With Shiftmatic Model

Engine

Output (kW)

Gross train weight/trailer load limit (kg) with rear-axle ratio 4.182:1

4.364:1

4.727:1

5.1:1

7,000/2,000

7,0001)/2,0001)

Delivery Van with normal roof, high roof or super-high roof (super-high roof not for Crafter 30) Crafter 30

2.5 l BlueTDI

100

5,0001)/2,0001)

5,000/2,000

Crafter 35

2.5 l BlueTDI

100

5,500 /2,000

5,500/2,000

6,3002)/2,8002) 7,0002)/3,5002) Crafter 50

2.5 l BlueTDI

100

7,000/3,0002)

7,0001)/3,0001), 2)

7,000/3,500

7,0001)/3,5001), 2)

1) Standard rear-axle ratio. 2) In conjunction with tow bar with increased trailer load limit (optional extra).

– Gross train weights and trailer load limits – The Crafter

The Crafter – Gross train weights and trailer load limits –

Dimensional drawings. Crafter 30/35 Delivery Van with medium wheelbase and normal roof

1650

Crafter 30 Delivery Van BlueMotion with short wheelbase and normal roof/ Crafter 30/35 Delivery Van with short wheelbase and normal roof

2600

1993

1000

3265

3250 5240

990

1993

1000

3665 5905

1240

1780

2415

1350

1780

2415

1350

2426

670

load compartment, volume

7.5 m3

load compartment, volume

9.0 m3

lateral sliding door, width/height

1,040/1,520 mm

lateral sliding door, width/height

1,300/1,520 mm

rear wing doors, width/height

1,565/1,540 mm

rear wing doors, width/height

1,565/1,540 mm

turning circle

12.3 m

13.6 m

Crafter 35 Delivery Van with medium wheelbase and super-high roof

2140

1940

Crafter 30/35 Delivery Van with medium wheelbase and high roof

turning circle

3265

1993

1000

3265

3665 5905

1240

1993

2426

1000

3665 5905

1240

670

1350

1780

2940

1350

1780

2705

2426

670

load compartment, volume

10.5 m

load compartment, volume

11.5 m3

lateral sliding door, width/height

1,300/1,820 mm

lateral sliding door, width/height

1,300/1,820 mm

rear wing doors, width/height

1,565/1,840 mm

rear wing doors, width/height

1,565/1,840 mm

turning circle

13.6 m

Crafter 35 Delivery Van with long wheelbase and super-high roof

2140

1940

Crafter 35 Delivery Van with long wheelbase and high roof

turning circle

4300

1993

1000

4300

4325 6940

1615

1993

2426

1000

4325 6940

1615

670

load compartment, volume

1350

1780

2940

1350

1780

2705

2426

670

14.0 m

load compartment, volume

15.5 m3

lateral sliding door, width/height

1,300/1,820 mm

lateral sliding door, width/height

1,300/1,820 mm

rear wing doors, width/height

1,565/1,840 mm

rear wing doors, width/height

1,565/1,840 mm

turning circle

15.6 m

turning circle

15.6 m

All measurements listed are based on series vehicles. The height measurements listed here can differ by approx. ±40 mm depending on equipment. The vehicle drawings are not to scale.

– Dimensional drawings – The Crafter

The Crafter – Dimensional drawings –

Dimensional drawings. Crafter 35 Delivery Van with long wheelbase, overhang and super-high roof

2140

1940

Crafter 35 Delivery Van with long wheelbase, overhang and high roof

4700

1993

1000

4700

4325 7340

2015

1000

1993

2426

4325 7340

2015

670

1350

1780

2940

1350

1780

2705

2426

670

load compartment, volume

15.5 m

load compartment, volume

17.0 m3

lateral sliding door, width/height

1,300/1,820 mm

lateral sliding door, width/height

1,300/1,820 mm

rear wing doors, width/height

1,565/1,840 mm

rear wing doors, width/height

1,565/1,840 mm

turning circle

15.6 m

Crafter 50 Delivery Van with medium wheelbase and high roof

1940

1650

Crafter 50 Delivery Van with medium wheelbase and normal roof

turning circle

3265

1993

1000

3265

3665 5905

1240

1993

2426

1000

3665 5905

1240

725

978

1780

2755

978

2470

1780

2426

725

load compartment, volume

9.0 m3

load compartment, volume

10.5 m3

lateral sliding door, width/height

1,300/1,520 mm

lateral sliding door, width/height

1,300/1,820 mm

rear wing doors, width/height

1,565/1,540 mm

rear wing doors, width/height

1,565/1,840 mm

turning circle

13.6 m

Crafter 50 Delivery Van with long wheelbase and high roof

2140

1940

Crafter 50 Delivery Van with medium wheelbase and super-high roof

turning circle

4300

3265

1993

1000

3665 5905

1993

1240

1000

4325 6940

1615

978

2755

1780

2990

978

720

725

load compartment, volume

1780

2426

11.5 m3

load compartment, volume

14.0 m3

lateral sliding door, width/height

1,300/1,820 mm

lateral sliding door, width/height

1,300/1,820 mm

rear wing doors, width/height

1,565/1,840 mm

rear wing doors, width/height

1,565/1,840 mm

turning circle

13.6 m

turning circle

15.6 m

All measurements listed are based on series vehicles. The height measurements listed here can differ by approx. ±40 mm depending on equipment. The vehicle drawings are not to scale.

– Dimensional drawings – The Crafter

The Crafter – Dimensional drawings –

Dimensional drawings.

Crafter 50 Delivery Van with long wheelbase, overhang and high roof

2140

1940

Crafter 50 Delivery Van with long wheelbase and super-high roof

4700

4300

1993

1000

4325 6940

1993

1615

1000

4325 7340

2015

978

2755

978

1780

2990

1780

2426

725

720

load compartment, volume

15.5 m3

load compartment, volume

15.5 m3

lateral sliding door, width/height

1,300/1,820 mm

lateral sliding door, width/height

1,300/1,820 mm

rear wing doors, width/height

1,565/1,840 mm

rear wing doors, width/height

1,565/1,840 mm

turning circle

15.6 m

turning circle

15.6 m

2140

Crafter 50 Delivery Van with long wheelbase, overhang and super-high roof

4700

1000

1993

4325 7340

2015

978

1780

2990

2426

725

load compartment, volume

17.0 m3

lateral sliding door, width/height

1,300/1,820 mm

rear wing doors, width/height

1,565/1,840 mm

turning circle

15.6 m

All measurements listed are based on series vehicles. The height measurements listed here can differ by approx. ±40 mm depending on equipment. The vehicle drawings are not to scale.

– Dimensional drawings – The Crafter

The Crafter – Dimensional drawings –

Dimensional drawings.

Crafter 30/35 Kombi with medium wheelbase and normal roof

1650

Crafter 30/35 Kombi with short wheelbase and normal roof

3265

2600

1993

1000

3250 5240

990

1993

1000

3665 5905

1240

1780

2415

1350

1780

2415 670

1350

2426

670

load compartment, volume

7.5 m3

load compartment, volume

9.0 m3

lateral sliding door, width/height

1,040/1,520 mm

lateral sliding door, width/height

1,300/1,520 mm

rear wing doors, width/height

1,565/1,540 mm

rear wing doors, width/height

1,565/1,540 mm

turning circle

12.3 m

13.6 m

Crafter 35 Kombi with long wheelbase and high roof

1940

Crafter 30/35 Kombi with medium wheelbase and high roof

turning circle

3265

1000

1993

4300

3665 5905

1240

1993

2426

1000

4325 6940

1615

670

load compartment, volume

1350

1780

2705

1350

1780

2705

2426

670

10.5 m3

load compartment, volume

14.0 m3

lateral sliding door, width/height

1,300/1,820 mm

lateral sliding door, width/height

1,300/1,820 mm

rear wing doors, width/height

1,565/1,840 mm

rear wing doors, width/height

1,565/1,840 mm

turning circle

13.6 m

turning circle

15.6 m

All measurements listed are based on series vehicles. The height measurements listed here can differ by approx. ±40 mm depending on equipment. The vehicle drawings are not to scale.

– Dimensional drawings – The Crafter

The Crafter – Dimensional drawings –

Tyre label.

Summer tyres

All seasons tyres

Winter tyres

Size

Rolling resistance

Wet grip

195/75 R 16 C

E–B

C–B

205/75 R 16 C

F–E

C–B

225/75 R 16 C

235/65 R 16 C

E–B

C–B

235/60 R 17 C

Size

Rolling resistance

Wet grip

205/75 R 16 C

285/65 R 16

Size

Rolling resistance

Wet grip

225/75 R 16 C

Noise emission

–

Noise emission

Fuel efficiency – the right tyre type can help you save on fuel. Wet grip – a shorter braking distance increases safety. External rolling noise – a quieter tyre increases your driving comfort and has a positive effect on the environment due to lower noise levels.

Placing an order for a specific tyre brand is not possible due to logistical and production process reasons.

– Tyre label – The Crafter

The Crafter – Tyre label –

2.0 l TDI (80 kW)

Rear-axle ratio

4.182:1

2.0 l TDI (105 kW)

2.0 l TDI (120 kW)

4.364:13)

4.727:1

4.182:1

4.364:13)

4.727:1

3.692:1

3.923:13)

4.182:1

Crafter 30/35 Dropside Van urban

10.4 – 10.6

10.3 – 11.3

11.5

9.5 – 10.2

10.1 – 11.1

11.5

8.6 – 9.0

9.0 – 9.2

9.5 – 10.2

extra-urban

6.9 – 7.9

7.8 – 8.3

8.7

7.2 – 7.8

7.6 – 8.1

8.7

6.9 – 7.7

7.0 – 7.9

7.2 – 7.8

combined

8.2 – 8.9

8.7 – 9.4

9.7

8.0 – 8.7

8.5 – 9.2

9.7

7.5 – 8.2

7.7 – 8.4

8.0 – 8.7

CO2 emissions combined

216 – 234

229 – 247

255

210 – 229

224 – 242

255

197 – 216

203 – 221

210 – 229

Crafter 30/35 Dropside Van with start/stop system

urban

9.8 – 10.7

11.0

9.6 – 10.5

11.0

8.6 – 8.7

8.9 – 9.5

extra-urban

7.7 – 8.1

8.5

7.5 – 8.1

8.5

6.8 – 7.7

7.0 – 7.8

combined

8.4 – 9.1

9.4

8.2 – 8.9

9.4

7.4 – 8.1

7.7 – 8.4

CO2 emissions combined

221 – 239

247

216 – 234

247

195 – 213

203 – 221

Crafter 30/35 Dropside Van with BlueMotion Technology urban

9.4 – 10.0

8.9 – 9.5

7.8 – 8.5

extra-urban

7.0 – 7.9

7.0 – 7.8

6.9 – 7.5

combined

7.9 – 8.6

7.7 – 8.4

7.2 – 7.9

CO2 emissions combined

208 – 227

203 – 221

189 – 208

Rear-axle ratio

4.111:1 (Crafter 4MOTION with Achleitner four-wheel drive)

Crafter 35 Dropside Van urban

10.2

extra-urban

7.8

combined

8.7

CO2 emissions combined

229

With Shiftmatic2), fuel consumption (litres/100 km) and combined CO2 emissions (g/km), fuel tank capacity approx. 75 litres Engine

2.5 l BlueTDI (100 kW)

Rear-axle ratio

4.364:13)

4.727:1

Crafter 30/35 Dropside Van (except double cab with short wheelbase) urban

10.6

10.9

extra-urban

8.7

8.9

combined

9.4

9.6

CO2 emissions combined

247

253

2.0 l TDI (80 kW)

Rear-axle ratio

4.182:1

4.364:12)

2.0 l TDI (100 kW)

4.727:1

4.182:1

4.364:12)

2.0 l TDI (120 kW)

4.727:1

3.692:1

3.923:12)

4.182:1

Crafter 30/35 Dropside Van (only models with a maximum unladen weight of 2,815 kg incl. special bodies) urban

9.8 – 10.7

10.2 – 10.8

11.5

9.8 – 10.7

10.2 – 10.8

11.5

8.4 – 9.0

8.8 – 9.2

9.6 – 10.3

extra-urban

7.3 – 7.9

7.9 – 8.6

8.7

7.3 – 7.9

7.9 – 8.6

8.7

7.0 – 7.7

7.1 – 7.9

7.1 – 7.8

combined

8.2 – 8.9

8.7 – 9.4

9.7

8.2 – 8.9

8.7 – 9.4

9.7

7.5 – 8.2

7.7 – 8.4

8.0 – 8.7

CO2 emissions combined

216 – 234

229 – 247

255

216 – 234

229 – 247

255

197 – 216

203 – 221

210 – 229

Crafter 30/35 Dropside Van with start/stop system (only models with a maximum unladen weight of 2,815 kg incl. special bodies) 3)

urban

9.7 – 10.3

11.0

9.7 – 10.3

11.0

8.2 – 8.7

9.2 – 9.6

extra-urban

7.7 – 8.4

8.5

7.7 – 8.4

8.5

7.0 – 7.7

6.8 – 7.7

combined

8.4 – 9.1

9.4

8.4 – 9.1

9.4

7.4 – 8.1

7.7 – 8.4

CO2 emissions combined

221 – 239

247

221 – 239

247

195 – 213

203 – 221

Crafter 30/35 Dropside Van with BlueMotion Technology (only models with a maximum unladen weight of 2,815 kg incl. special bodies) urban

9.5 – 10.0

7.8 – 8.5

extra-urban

7.1 – 7.7

6.8 – 7.5

combined

7.9 – 8.6

7.2 – 7.9

CO2 emissions combined

208 – 226

189 – 208

Engines. Diesel engines

2.0 l TDI engine (80 kW)

2.0 l TDI engine (100 kW) (only with Crafter 30/35)

Mixture preparation/injection method

common rail direct injection

No. of cylinders

Cubic capacity, cm3

1,968

1,968 100 at 3,500

Output, kW at rpm

80 at 3,500

Max. torque, Nm/rpm

300/1,500 – 2,250

340/1,575 – 2,250

EU exhaust emission directive

EEV1) according to regulation 2005/55/EC, version 2008/74/EC or according to EC regulation 715/2007 Euro 5 respectively

according to EC regulation 715/2007 Euro 5

Diesel particulate filter (DPF)

standard

6-speed manual gearbox

standard

Rear-wheel drive

standard

Type of fuel

diesel, in accordance with DIN EN 590

Diesel engines

2.5 l BlueTDI engine (100 kW)

2.0 l TDI engine (105 kW)

Mixture preparation/injection method

common rail direct injection

BiTurbo common rail direct injection

No. of cylinders

Cubic capacity, cm3

2,461

1,968 105 at 3,500

Output, kW at rpm

100 at 3,500

Max. torque, Nm/rpm

330/2,000

340/1,575 – 2,250

EU exhaust emission directive

EEV1) according to regulation 2005/55/EC, version 2008/74/EC

Diesel particulate filter (DPF)

standard

6-speed manual gearbox/6-speed Shiftmatic

–/standard

standard/–

Rear-wheel drive

standard

Type of fuel

diesel, in accordance with DIN EN 590

Diesel engine

2.0 l TDI engine (120 kW)

Mixture preparation/injection method

BiTurbo common rail direct injection

No. of cylinders

Cubic capacity, cm3

1,968

Output, kW at rpm

120 at 3,600

Max. torque, Nm/rpm

400/1,800

EU exhaust emission directive

EEV1) according to regulation 2005/55/EC, version 2008/74/EC or according to EC regulation 715/2007 Euro 5 respectively

Diesel particulate filter (DPF)

standard

6-speed manual gearbox

standard

40 20

340 Nm

60 40 20

100 kW

100 80 330 Nm 60 40 20

400 350 300 250 200 150 100 50

2.0 l TDI (EEV)

140

120 kW

105 kW

100 kW 400 350 300 250 200 150 100 50

2.5 l BlueTDI (EEV)

120

output [kW]

300 250 200 150 100 50

100

140

torque [Nm]

300 Nm

100 kW

output [kW]

80 kW

torque [Nm]

output [kW]

100

2.0 l TDI (Euro 5)

140 120

torque [Nm]

100 kW

2.0 l TDI (EEV/Euro 5)

output [kW]

140 120

120 105 kW 100 80

340 Nm

60 40 20

400 350 300 250 200 150 100 50

output [kW]

diesel, in accordance with DIN EN 590

torque [Nm]

standard

Type of fuel

80 kW

Rear-wheel drive

140

2.0 l TDI (EEV/Euro 5) 120 kW

120 100 80

400 Nm

60 40 20

1000 2000 3000 4000 5000

engine speed [rpm]

400 350 300 250 200 150 100 50

torque [Nm]

1) “Enhanced Environmentally Friendly Vehicle”, the figures established are below the limits set by the EURO V emission standard. 2) Not available for Crafter Chassis/Dropside Van with double cab and short wheelbase.

– Engines – The Crafter

The Crafter – Engines –

Top speeds.

With manual gearbox Model

Engine

Output (kW)

Top speeds (kph) with rear-axle ratio 3.692:1

3.923:1

4.182:1

4.364:1

4.727:1

5.1:1

Dropside Van with single cab or double cab Crafter 30/35

Crafter 503)

2.0 l TDI

1371)

1352)

133

2.0 l TDI

100

1421)

1402)

138

2.0 l TDI

105

144

142

140

2.0 l TDI

120

2.0 l TDI

1271)

1252)

2.0 l TDI

105

133

1312)

2.0 l TDI

120

Engine

Output (kW)

1521)

1502)

147

142

140

138

132

With Shiftmatic Model

Top speeds (kph) with rear-axle ratio 4.364:1

4.727:1

5.1:1

Dropside Van with single cab or double cab (except double cab with short wheelbase) Crafter 30/35

2.5 l BlueTDI

100

Crafter 50

2.5 l BlueTDI

100

1452)

141 133

1302)

1) Standard rear-axle ratio with BlueMotion Technology. 2) Standard rear-axle ratio. 3) The maximum speeds shown here refer to non-deactivated vehicles. For deactivated vehicles, the maximum speed is 90 kph.

– Top speeds – The Crafter

The Crafter – Top speeds –

Weights.

Model/ Gross vehicle weight (kg)

Wheelbase (mm)

Unladen weight with driver (kg)1) from – to

Payload (kg)1) from – to

Axle load limit front/rear (kg)

Gross train weight 12 % gradient (kg)2)

3,250

1,651 – 2,066

1,349 – 934

1,650/1,800

5,000

1,664 – 2,079

1,836 – 1,421

1,6503)/2,250

5,300 – 6,300

1,668 – 2,084

1,332 – 916

1,650/1,800

5,000

Crafter 35 3,500

1,681 – 2,097

1,819 – 1,403

1,6503)/2,250

5,300 – 7,0004)

Crafter 50 5,000

1,906 – 2,422

3,094 – 2,578

1,8505)/3,500

7,000 – 8,0004)

1,711 – 2,129

1,789 – 1,371

1,6503)/2,250

5,300 – 7,0004)

1,944 – 2,462

3,056 – 2,538

1,8505)/3,500

7,000 – 8,0004)

1,849 – 2,192

1,151 – 808

1,650/1,800

5,000

1,862 – 2,277

1,638 – 1,223

1,6503)/2,250

5,300 – 6,300

1,871 – 2,160

1,129 – 840

1,650/1,800

5,000

Crafter 35 3,500

1,884 – 2,300

1,616 – 1,200

1,6503)/2,250

5,300 – 7,0004)

Crafter 50 5,000

2,127 – 2,633

2,873 – 2,367

1,8505)/3,500

7,000 – 8,0004)

1,912 – 2,330

1,588 – 1,170

1,800/2,250

5,300 – 7,0004)

2,141 – 2,576

2,859 – 2,424

1,8505)/3,500

7,000 – 8,0004)

Chassis with single cab Crafter 30 3,000 Crafter 35 3,500 Crafter 30 3,000

Crafter 35 3,500

3,665

4,325

Crafter 50 5,000 Chassis with double cab Crafter 30 3,000

3,250

Crafter 35 3,500 Crafter 30 3,000

Crafter 35 3,500 Crafter 50 5,000

3,665

4,325

1) Equipment can result in an increase/decrease in the unladen weight and consequently affect the payload. Please consult your Volkswagen Commercial Vehicle partner. 2) Depending on the combination of engine, final drive ratio and tow bar. 3) Depending on the equipment, the front axle load limit may increase to 1,800 kg. This can affect the minimum payload. 4) Only possible in conjunction with tow bar with increased trailer load limit (optional extra). 5) Depending on the equipment, the front axle load limit may increase to 2,000 kg. This can affect the minimum payload. For commercial use: in accordance with EU directive 3820/85, a tachograph is stipulated by law as of a gross train weight of 3.5 tonnes. Retrofitting of a tachograph is possible on all vehicles (standard at Crafter 50). The payload ranges illustrated here have been established bearing in mind equipment that can be selected or omitted, and other features which do not belong to the standard scope of delivery or standard specifications. A vehicle‘s actual payload, which results from calculating the difference between the gross vehicle weight and the unladen weight, can only determined by weighing the individual vehicle.

– Weights – The Crafter

The Crafter – Weights –

Weights.

Model/ Gross vehicle weight (kg)

Wheelbase (mm)

Unladen weight with driver (kg)1) from – to

Payload (kg)1) from – to

Axle load limit front/rear (kg)

Gross train weight 12 % gradient (kg)2)

1,849 – 2,264

1,151 – 736

1,650/1,800

5,000

1,862 – 2,227

1,638 – 1,223

1,6503)/2,250

5,500 – 6,300

1,898 – 2,314

1,102 – 686

1,650/1,800

5,000

Crafter 35 3,500

1,911 – 2,327

1,589 – 1,173

1,6503)/2,250

5,500 – 7,0004)

Crafter 50 5,000

2,207 – 2,723

2,793 – 2,277

1,8505)/3,500

7,000 – 8,0004)

1,990 – 2,408

1,510 – 1,092

1,6503)/2,250

5,500 – 7,0004)

2,291 – 2,809

2,709 – 2,191

1,8505)/3,500

7,000 – 8,0004)

2,007 – 2,350

993 – 650

1,650/1,800

5,000

2,020 – 2,435

1,480 – 1,065

1,6503)/2,250

5,500 – 6,300

2,061 – 2,350

939 – 650

1,650/1,800

5,000

Crafter 35 3,500

2,074 – 2,490

1,426 – 1,010

1,6503)/2,250

5,500 – 7,0004)

Crafter 50 5,000

2,358 – 2,864

2,642 – 2,136

1,8505)/3,500

7,000 – 8,0004)

2,145 – 2,563

1,355 – 937

1,800/2,250

5,500 – 7,0004)

2,434 – 2,869

2,566 – 2,131

1,8505)/3,500

7,000 – 8,0004)

Dropside Van with single cab Crafter 30 3,000

3,250

Crafter 35 3,500 Crafter 30 3,000

Crafter 35 3,500

3,665

4,325

Crafter 50 5,000 Dropside Van with double cab Crafter 30 3,000

3,250

Crafter 35 3,500 Crafter 30 3,000

Crafter 35 3,500

3,665

4,325

Crafter 50 5,000 Roof load limits Model

Trailer nose weights Roof load limit (kg)

Trailer nose weight (kg)

With trailer load limit (kg)

100

2,000

120

2,800/3,000

140

3,500

Chassis and Dropside Van Single/double cab

100

1) Equipment can result in an increase/decrease in the unladen weight and consequently affect the payload. Please consult your Volkswagen Commercial Vehicle partner. 2) Depending on the combination of engine, final drive ratio and tow bar. 3) Depending on the equipment, the front axle load limit may increase to 1,800 kg. This can affect the minimum payload. 4) Only possible in conjunction with tow bar with increased trailer load limit (optional extra). 5) Depending on the equipment, the front axle load limit may increase to 2,000 kg. This can affect the minimum payload. For commercial use: in accordance with EU directive 3820/85, a tachograph is stipulated by law as of a gross train weight of 3.5 tonnes. Retrofitting of a tachograph is possible on all vehicles (standard at Crafter 50). The payload ranges illustrated here have been established bearing in mind equipment that can be selected or omitted, and other features which do not belong to the standard scope of delivery or standard specifications. A vehicle‘s actual payload, which results from calculating the difference between the gross vehicle weight and the unladen weight, can only determined by weighing the individual vehicle.

– Weights – The Crafter

The Crafter – Weights –

Dimensions and weights Crafter 4MOTION.

Model/ feature

Crafter 35 4MOTION with Achleitner four-wheel drive (Chassis, Dropside Van)

Crafter 50 4MOTION with Achleitner four-wheel drive (Chassis, Dropside Van)

Wheelbase (mm)

3,250

3,665

4,325

3,665

4,325

Ground clearance front axle (mm)

280

Ground clearance transfer case (mm)

300

295

Ground clearance rear axle (mm)

from approx. 240 –269

from approx. 246 –268

Axle load limit (front/rear) (kg)

1,800/2,250

2,000/3,500

Trailer weight braked (kg)/ unbraked (kg)

2,000 –2,800/ 750

2,000 –3,500/ 750

Gross train weight at 12 % gradient (kg)

5,300 – 6,300

5,300 –7,000*

5,300 – 7,000*

7,000 – 8,000*

Wading depth (mm)

600

Chassis elevation 4 x 4 (mm)

100

Rear-axle ratio, ex factory/Achleitner

4.182/4.111

4.364 or 4.727 (optional)/ 4.375 or 4.857 (optional)

Auxiliary drive

an auxiliary drive on the main gear is possible

– Dimensions and weights Crafter 4MOTION – The Crafter

The Crafter – Dimensions and weights Crafter 4MOTION –

Gross train weights and trailer load limits.

With manual gearbox Model

Engine

Output (kW)

Gross train weight/trailer load limit (kg) with rear-axle ratio 3.923:1

3.692:1

4.182:1

4.364:1

4.727:1

5.1:1

Chassis /Dropside Van with single cab or double cab Crafter 30

Crafter 35

2.0 l TDI

5,0001)/2,0001)

5,0002)/2,0002)

5,000/2,000

2.0 l TDI

100

5,0001)/2,0001)

5,0002)/2,0002)

5,000/2,000

2.0 l TDI

105

5,000 /2,000

5,000/2,000

2.0 l TDI

120

2.0 l TDI

5,0001)/2,0001)

5,0002)/2,0002)

5,000/2,000 5,5001)/2,0001)

100

5,5001)/2,0001)

5,5002)/2,0002) 6,300

2), 3)

7,000

2), 3)

2.0 l TDI

105

120

5,500 /2,000 1)

5,300 /2,000 1)

5,500 /2,000 2)

5,500/2,000

/2,800

2), 3)

6,3003)/2,8003)

/3,500

2), 3)

7,0003)/3,5003)

5,5002)/2,0002)

6,3003)/2,8003)

7,0002), 3)/3,5002), 3)

7,0003)/3,5003)

5,500 /2,000

5,500/2,000

2), 3)

/2,800

5,500/2,000 2), 3)

6,300

2.0 l TDI

6,3002), 3)/2,8002), 3)

6,3003)/2,8003)

7,000

7,0003)/3,5003)

2), 3)

/3,500

2), 3)

5,500/2,000

6,3002), 3)/2,8002), 3)

6,3003)/2,8003) 7,0003)/3,5003)

Crafter 50

2.0 l TDI

7,0001)/2,0001)

7,0002)/2,0002)

7,0001)/3,0001), 3)

7,0002)/3,0002), 3)

7,000 /3,500

7,0002)/3,5002), 3)

2.0 l TDI

105

7,0001)/2,0001)

7,0002)/2,0002)

7,000 /3,000

1), 3)

7,0002)/3,0002), 3)

7,0001)/3,5001), 3)

7,0002)/3,5002), 3)

2.0 l TDI

120

7,000 /2,000

7,000/2,000

7,0001)/3,0001), 3)

7,5002), 3)/3,0002), 3)

8,0003)/3,0003)

7,0001)/3,5001), 3)

7,5002), 3)/3,5002), 3)

8,0003)/3,5003)

7,000 /2,000

1), 3)

With Shiftmatic Model

Engine

Output (kW)

Gross train weight/trailer load limit (kg) with rear-axle ratio 4.182:14)

4.364:1

4.727:1

5.1:1

Chassis /Dropside Van with single cab or double cab (except double cab with short wheelbase) Crafter 30

2.5 l BlueTDI

100

5,000/2,000

5,0002)/2,0002)

Crafter 35

2.5 l BlueTDI

100

5,500/2,000

5,5002)/2,0002)

6,3003)/2,8003)

7,0002), 3)/3,5002), 3)

7,0003)/3,5003)

6,300

Crafter 50

2.5 l BlueTDI

100

5,500/2,000 2), 3)

2), 3)

/2,800

5,000/2,000

7,000/2,000 7,000/3,000

7,0002)/2,0002) 3)

7,0002)/3,0002), 3)

7,000/3,5003)

7,0002)/3,5002), 3)

1) Standard rear-axle ratio with BlueMotion Technology. 2) Standard rear-axle ratio. 3) In conjunction with tow bar with increased trailer load limit (optional extra). 4) Only with Chassis.

– Gross train weights and trailer load limits – The Crafter

The Crafter – Gross train weights and trailer load limits –

Dimensional drawings.

Crafter 30 Chassis with single cab and short wheelbase

1990

1000

3250 5300

Crafter 30 Chassis with single cab and medium wheelbase

1990

1050

1000

3665 5865

1200

2426 2360

2355

2426

recommended exterior length for special body

3,050 mm

turning circle

12.3 m

Crafter 35 Chassis with single cab and short wheelbase

1990

1000

3250 5300

recommended exterior length for special body

3,670 mm

turning circle

13.5 m

Crafter 35 Chassis with single cab and medium wheelbase

1050

1990

2426

1000

3665 5865

1200

2355

2345

2426

recommended exterior length for special body

3,050 mm

turning circle

12.3 m

Crafter 35 Chassis with single cab and long wheelbase

1990

1000

4325 6675

recommended exterior length for special body

3,670 mm

turning circle

13.5 m

Crafter 50 Chassis with single cab and medium wheelbase

1000

1990

1350

3665 6082

1417

2426

recommended exterior length for special body turning circle

2380

2345

2426

4,425 mm 15.6 m

recommended exterior length for special body turning circle

3,845 mm 13.5 m

All measurements listed are based on series vehicles. The height measurements listed here can differ by approx. ±40 mm depending on equipment. The vehicle drawings are not to scale.

– Dimensional drawings – The Crafter

The Crafter – Dimensional drawings –

Dimensional drawings.

Crafter 50 Chassis with single cab and long wheelbase

1990

1000

4325 6842

Crafter 30 Chassis with double cab and short wheelbase

1517

1990

1000

3250 5300

1050

2426 2375

2370

2426

recommended exterior length for special body

4,610 mm

turning circle

15.6 m

Crafter 30 Chassis with double cab and medium wheelbase

1990

1000

3665 5865

recommended exterior length for special body

2,160 mm

turning circle

12.3 m

Crafter 35 Chassis with double cab and short wheelbase

1200

1990

2426

1000

3250 5300

1050

2370

2365

2426

recommended exterior length for special body

2,770 mm

turning circle

13.5 m

Crafter 35 Chassis with double cab and medium wheelbase

1990

1000

3665 5865

recommended exterior length for special body

2,160 mm

turning circle

12.3 m

Crafter 35 Chassis with double cab and long wheelbase

1990

1200

2426

1000

4325 6675

1350

2360

2350

2426

recommended exterior length for special body turning circle

2,770 mm 13.5 m

recommended exterior length for special body turning circle

3,440 mm 15.6 m

All measurements listed are based on series vehicles. The height measurements listed here can differ by approx. ±40 mm depending on equipment. The vehicle drawings are not to scale.

– Dimensional drawings – The Crafter

The Crafter – Dimensional drawings –

Dimensional drawings.

Crafter 50 Chassis with double cab and medium wheelbase

1990

1000

3665 6082

Crafter 50 Chassis with double cab and long wheelbase

1417

1990

2426

1000

4325 6842

1517

2385

2400

2426

recommended exterior length for special body

2,770 mm

turning circle

13.5 m

Crafter 30 Dropside Van with single cab and short wheelbase

recommended exterior length for special body

3,610 mm

turning circle

15.6 m

Crafter 30 Dropside Van with single cab and medium wheelbase

400

965

400

2090

1000

3250 5474

2090

1224

2426

1000

3665 6024

1359

2030

2345

2030

2350

2426

2850

3400

load area

5.8 m2

load area

6.9 m2

turning circle

12.3 m

turning circle

13.5 m

Crafter 35 Dropside Van with single cab and short wheelbase

Crafter 35 Dropside Van with single cab and medium wheelbase

400

1000

2090

3250 5474

960

400

1224

2090

2426

1000

3665 6024

1359

2030

2345

2030

2345

2426

3400

2850

load area

5.8 m2

load area

6.9 m2

turning circle

12.3 m

turning circle

13.5 m

All measurements listed are based on series vehicles. The height measurements listed here can differ by approx. ±40 mm depending on equipment. The vehicle drawings are not to scale.

– Dimensional drawings – The Crafter

The Crafter – Dimensional drawings –

Dimensional drawings.

Crafter 35 Dropside Van with single cab and long wheelbase

Crafter 50 Dropside Van with single cab and medium wheelbase

400

1000

2090

4325 6924

1025

965

400

1599

1000

2190

2426

3665 6224

1559

2130

2370

2030

2330

2675

3600

4300

load area

8.7 m2

load area

7.7 m2

turning circle

15.6 m

turning circle

13.5 m

Crafter 50 Dropside Van with single cab and long wheelbase

Crafter 30 Dropside Van with double cab and short wheelbase

400

1030

965

400

1000

2190

4325 6924

2090

1599

1000

3250 5554

1304

2426 2030

2365

2360

2130

2675

4300

2120

load area

9.2 m2

load area

4.3 m2

turning circle

15.6 m

turning circle

12.3 m

Crafter 30 Dropside Van with double cab and medium wheelbase

Crafter 35 Dropside Van with double cab and short wheelbase

400

1000

2090

3665 6134

960

965

400

1469

2090

2426

1000

3250 5554

1304

2700

2030

2360

2355

2030

2426

2120

load area

5.5 m2

load area

4.3 m2

turning circle

13.5 m

turning circle

12.3 m

All measurements listed are based on series vehicles. The height measurements listed here can differ by approx. ±40 mm depending on equipment. The vehicle drawings are not to scale.

– Dimensional drawings – The Crafter

The Crafter – Dimensional drawings –

Dimensional drawings.

Crafter 35 Dropside Van with double cab and medium wheelbase

Crafter 35 Dropside Van with double cab and long wheelbase

400

960

400

1000

2090

3665 6134

2090

1469

1000

4325 6834

1509

2426 2030

2350

2030

2340

2426

3400

2700

load area

5.5 m2

load area

6.9 m2

turning circle

13.5 m

turning circle

15.6 m

Crafter 50 Dropside Van with double cab and medium wheelbase

Crafter 50 Dropside Van with double cab and long wheelbase

400

1000

2190

3665 6134

1030

1020

400

1469

2190

2675

1000

4325 7034

1709

2130

2375

2390

2130

2675

3600

2700

load area

5.8 m2

load area

7.7 m2

turning circle

13.5 m

turning circle

15.6 m

All measurements listed are based on series vehicles. The height measurements listed here can differ by approx. ±40 mm depending on equipment. The vehicle drawings are not to scale.

– Dimensional drawings – The Crafter

The Crafter – Dimensional drawings –

Tyre label.

Summer tyres

All seasons tyres

Winter tyres

Size

Rolling resistance

Wet grip

195/75 R 16 C

E–B

C–B

205/75 R 16 C

F–E

C–B

225/75 R 16 C

235/65 R 16 C

E–B

C–B

235/60 R 17 C

Size

Rolling resistance

Wet grip

205/75 R 16 C

285/65 R 16

Size

Rolling resistance

Wet grip

225/75 R 16 C

Noise emission

–

Noise emission

Placing an order for a specific tyre brand is not possible due to logistical and production process reasons.

– Tyre label – The Crafter

The Crafter – Tyre label –

The Crafter 265.1190.13.18 â&#x20AC;˘ Printed in Germany Subject to change without notice Issue: November 2012 www.volkswagen-commercial-vehicles.com

Your Volkswagen Dealer