Usb danny wang s3273910

Cyber Spoke ZhiBo Wang (Danny) 2013

Research

INSPIRATION

My inspiration of my design comes from the engines of aeroplanes.

The shape and structure of engines are attractive. Aeroplanes engines are mainly made by hand because they are big and require specific measurements for every single planes.

Scaling its shape down to a USB size has become my project inspiration but it cannot be made by hand. Instead, using 3D printing machine is a perfect fit for this kind.

Design sketches & Development

it can become necklace

Hanging on the key ring

My final concept of my design has then developed to look like this as shown in the picture. It had such development because the previous version require expensive costs. In order to reduce costs, I have changed the design of the top part into solid dome.

3D print and Mock ups

This mock up has been printed out by ABS plastic, the quality of the mock up is not very good, So I need to manually sanding the surface.

Tools and colour spray

Sand paper Colour spray

Metal Files

Experiment with colour Brush the Mr surface on USB shell, until it dry.

Use colour spray to evenly spray to the surface.

Use sand paper to sand the surface become smooth.

Packaging design

TOP

Bottom

COST