2014 zmdi global online brochure

Power Management Power and Precision

Mobile Sensing Smart and Mobile

Automotive ASICs and Industrial ASSPs Multi-Functional and Robust

Battery Management Adaptive and Efficient

Multi-Market Sensing Precise and Deliberate

ÂŽ

pink is the new green enabling energy efficient solutions

ZMDI – 50 Years of Growth and Innovation Sensing Solutions Digital and Analog Power Management Automotive ASICs and Industrial ASSPs

ZMDI - at a glance Zentrum Mikroelektronik Dresden AG (ZMDI) is a global, innovation-driven, customer-focused enterprise delivering high-performance analog and mixed signal semiconductor solutions for over 50 years. The ZMDI difference is that we partner fully throughout the development of innovative analog and digital power and sensing technologies, expertly exploring your unique system requirements, solving design challenges, and then collaboratively designing and delivering subsystem and/or architectural solutions. ZMDI’s solutions enable our customers to create the most energy-efficient products for sensors, power management, and lighting.

• ZMDI is a global provider of energy-efficient mixed signal solutions • Over 50 years of system and applications knowhow applied to every customized and standard product • Turnkey solution delivery from specification to final product • Continuous strategic investment in talent and state-of-the-art engineering and test facilities • Long-term commitment to “1st-Time Right” strategy for IC development • High-level modeling for system simulation • Well-established record of excellence in serving an international customer base

Power and Precision

The PUMA exhibits power and precision in a flash but with minimal power consumption — just like ZMDI Power Management products. ZMDI power solutions provide proven reliability, and they are flexible, easy to use, high performance, easily optimized, and reusable.

Power Management Multi-Functional and Robust

Automotive and Industrial ASSP

The Chameleon is hardy enough to thrive in tough environments — similar to ZMDI’s robust and reliable products for automotive and industrial applications.

Smart and Mobile

The HUMMINGBIRD is the fastest and most agile of birds while also being the most energy efficient. As an intelligent consumer of energy, the hummingbird best represents ZMDI‘s ICs for mobile sensing.

Mobile Sensing Precise and Deliberate

The Dragonfly quickly and accurately processes multiple analog signals in demanding environments – just like the precise measurements ZMDI sensor interface products make “on the fly.”

Multi-Market Sensing Adaptive and Efficient

Battery Management

The POLAR BEAR demonstrates the ability to store energy and moderate its internal systems to thrive in harsh and unforgiving climates – critical elements that ZMDI Battery Management devices provide in conserving energy through precise predictions of battery requirements and conditions, enabling optimized usage and extended lifetime of the battery.

Visit www.zmdi.com for more detailed information

2

ZMDI - Making a positive impact As a result of ZMDI’s leadership in energy-efficient solutions for automotive, industrial, and mobile applications, we have been honored with prestigious awards.

We have been selected as a finalist in the EE Times and EDN Annual Creativity in Electronics (ACE) Awards 2014 for the category ”Energy Technology Award“ for our ZSSC1956 Intelligent Battery Monitoring Solution, as well as for the ”Marketing Team“ for our joint marketing campaigns with our partners.

In 2012 as well as 2013, we received the Green Apple Award for products that contribute to “passive” energy savings.

ZMDI was honored with the “Best Company for Innovation and Sustainability Award” (regional) by the International Alternative Investment Review (IAIR) for 2013.

In 2012, we received the “Innovative Enterprise of the Year 2012” presented by the president of Bulgaria.

Frost & Sullivan have recognized us with the 2012 Europe Frost & Sullivan New Product Innovation Award for our innovative battery-monitoring device.

For over 50 years, we have offered our customers high-quality products and services at great value

Global Corporate Catalog

3

Products available at ZMDI On-Line Store

Multi-Market Sensing Precise and Deliberate

Multi-Market Sensing from ZMDI Highly efficient, high value application-specific and standard product sensor signal conditioners

Easy-to-Use Sensor Signal Conditioner ICs from ZMDI Designing sensor interfaces can be quite challenging and time consuming, and producing them in volume is often expensive due to long test cycles on costly production test equipment. ZMDI SSC ICs facilitate both design and production of sensor interfaces by providing programmable, highly accurate, wide gain and quantization functions combined with powerful, high-order digital correction and linearization algorithms.

ZMDI Sensor Signal Conditioner ICs are all-in-one, energy-efficient products that are easy to use and are supported by advanced software and expert technical support staff with extensive sensor system design experience. A distinct advantage of our correction algorithms is that they are calibrated and programmed in an efficient “single-pass” operation that lowers costs by reducing test time and loading of production test equipment without sacrificing precision. ZMDI Sensor Signal Conditioner ICs also lower total system costs by simplifying sensor design with our excellent support tools, reducing external components, minimizing board space, and providing a faster migration to production.

ZMDI Sensor Signal Conditioning ICs enable you to get it right – on the first pass!

edge global technology company with over 50 years of success designing semiconductor solutions that enable our

Typical Applications Highly efficient, high value application-specific and standard product sensor signal conditioners: • • • • •

ZMDI is a leading-

Humidity Pressure Flow Position Applications across multiple growth markets

customers to create energyefficient products

Global Corporate Catalog

5

Products available at ZMDI On-Line Store

Product Name

Adjustable Analog Gain Values

ADC Resolution

Sample Rate

Temperature Compensation / Ext.Temperature Sensor

Interface Options (Note: I2C™ is a trademark of NXP)

Resistive Resistive Automotive AEC Q-100 Qualified

ZSC31010

6 / 12 / 24 / 48

14 Bit

Up to 1.0kHz

/ -

Ratiometric Voltage Absolute Voltage 0 to 1V or 5V ZACwire™

ZSC31014

1.5 / 3 / 6 / 12 / 24 / 48 / 96 / 192

14 Bit

Up to 2.0kHz

/

I²C™ & SPI

ZSC31015

6 / 24 / 48 / 96

14 Bit

Up to 1.0kHz

/ 

Ratiometric Voltage Absolute Voltage 0 to 1V or 5V ZACwire™ (12-Bit DAC)

ZSC31050

3 / 7 / 9 / 14 / 26 / 35 / 52 / 70 / 105 / 140 / 210 / 280 / 420

9 to 15 Bit

Up to 3.9kHz

/ 

Ratiometric or Absolute Voltage; 4mA to 20mA Two PWMs; Two Alarms; I²C™ & SPI & ZACwire™ (11-Bit DAC)

ZSSC3016

13.2 to 72

16 Bit

Up to 175Hz

/ -

I²C™ & SPI

ZSSC3026

13.2 to 72

16 Bit

Up to 175Hz

/ -

I²C™ & SPI

ZSSC3027

13.2 to 72

16 Bit

Up to 175Hz

/ -

I²C™ & SPI

ZSSC3036

13.2 to 72

16 Bit

Up to 325Hz

/ -

I²C™ & SPI

ZSC31150

3 / 7 / 9 / 14 / 26 / 35 / 52 / 70 / 105 / 140 / 210 / 280 / 420

13 to 16 Bit

Up to 7.8kHz

/ 

Ratiometric 0 to 5V I²C™ & ZACwire™ (12-Bit DAC)

ZSSC3015

6 / 24 / 48 / 96

14 Bit

Up to 1.0kHz

/ 

Ratiometric Voltage Absolute Voltage 0 to 1V or 5V ZACwire™ (12-Bit DAC)

ZSSC3131

3 / 7 / 9 / 14 / 26 / 35 / 52 / 70 / 105

13 to 14 Bit

Up to 200Hz

/ -

Ratiometric 0 to 5V I²C™ & ZACwire™ (12-Bit DAC)

ZSSC3135

3 / 7 / 9 / 14 / 26 / 35 / 52 / 70 / 105

13 to 14 Bit

Up to 200Hz

/ 

Ratiometric 0 to 5V I²C™ & ZACwire™ (12-Bit DAC)

ZSSC3136

3 / 7 / 9 / 14 / 26 / 35 / 52 / 70 / 105

13 to 14 Bit

Up to 200Hz

/ 

Ratiometric 0 to 5V I²C™ & ZACwire™ (12-Bit DAC)

ZSSC3138

3 / 7 / 9 / 14 / 26 / 35 / 52 / 70 / 105 / 140 / 210 / 280 / 420

13 to 16 Bit

Up to 7.8kHz

/ -

Ratiometric 0 to 5V I²C™ & ZACwire™ (12-Bit DAC)

ZSSC3154

3 / 7 / 9 / 14 / 26 / 35 / 52 / 70 / 105 / 140 / 210 / 280 / 420

14 Bit

Up to 2.0kHz

/ 

Dual Analog Out Ratiometric 0 to 5V I²C™ & ZACwire™ (12-Bit DAC)

ZSSC3170

3 / 7 / 9 / 14 / 26 / 35 / 52 / 70 / 105 / 140 / 210 / 280 / 420

13 to 14 Bit

Up to 430Hz

/ 

PWM (12-Bit) LIN (1.3 / 2.0 / 2.1)

Capacitive

Input Capacitance Ranges in pF ZSSC3122

2 to 10

8 to 14 Bit

Up to 1.0kHz

/ -

I²C™ & SPI (only MISO) PDM (ratiometric analog output possible - RC filter) Two Alarms

ZSSC3123

2 to 8 8 to 32 32 to 130 130 to 260

8 to 14 Bit

Up to 1.0kHz

/ -

I²C™ & SPI (only MISO) PDM (ratiometric analog output possible - RC filter) Two Alarms

See page 48 for details about the ZOPT3100, our unique, leading-edge optical sensor IC.

Visit www.zmdi.com for more detailed information

6

Operation Temperature Range in °C

Supply Voltage in V DC

Current Consumption (see data sheet for conditions)

Package Options

-50 to +150

2.7 to 5.5 (>5.5V with ext. JFET)

0.25mA

SOP8 / Die

-40 to +125

2.7 to 5.5

-50 to +150

2.7 to 5.5 (>5.5V with ext. JFET)

250µA

SOP8 / Die

-40 to +150 (depends on part number; see data sheet)

2.7 to 5.5 (>5.5V with ext. JFET)

2.5mA

SSOP16 / Die

-40 to +85

1.8 to 3.6

-40 to +110

1.8 to 3.6

-40 to +85

1.7 to 3.6

-40 to +110

1.8 to 3.6

70µA

SOP8 / Die

(2µA Sleep Mode)

900µA (40nA Sleep Mode at 25°C)

900µA (50nA Sleep Mode at <85C)

930µA

(20nA Sleep Mode)

900µA (20nA Sleep Mode at 85C)

(SSC) ICs typically interface with two main sensor types: resistive bridges

Die

and differential capacitors. For each

Die

sensor type, further specialization

4.5 to 5.5

5.5mA

-50 to +150

2.7 to 5.5 (>5.5V with ext. JFET)

300µA

SOP8 / Die

-40 to +150

4.5 to 5.5

5.5mA

SSOP14 / Die

-40 to +150

4.5 to 5.5

5.5mA

SSOP14 / Die

-40 to +150

4.5 to 5.5

5.5mA

SSOP14 / Die

-40 to +150

4.5 to 5.5

5.5mA

SSOP14 / Die

-40 to +140

4.5 to 5.5

10mA

QFN32 / Die

7 to 18

(40µA Sleep Mode)

ZMDI‘s Sensor Signal Conditioner

PQFN24 / Die

-40 to +150

-40 to +150

Sensor Signal Conditioner Product Family

Die

SSOP14 / DFN14

7mA

ZSSC/ZSC Selection Guide

SSOP20/ Die

allows selecting the optimal balance between price and performance for the required operating voltage and

temperature

range,

gain,

resolution, input/output format, and qualification level.

ZMDI‘s

SSC

compensation

ICs

offer

digital

of

sensor

offset,

sensitivity, temperature drift, and nonlinearity in wide operational

-40 to +125

1.8 to 5.5

-40 to +125

2.3 to 5.5

60µA

(1µA Sleep Mode)

60µA

(1µA Sleep Mode)

TSSOP14 / Die

TSSOP14 / Die

temperature

ranges:

-50°C

to

+150°C (maximum range).

Global Corporate Catalog

7

Products available at ZMDI On-Line Store

ZSC31010

RBicLite™ Analog Output Sensor Signal Conditioner

ZSC31010

RBicLite™ Analog Output Sensor Signal Conditioner

Brief Description

Benefits

The ZSC31010 is a sensor signal conditioner integrated circuit, which enables easy and precise calibration of resistive bridge sensors via EEPROM. When mated to a resistive bridge sensor, it will digitally correct offset and gain with the option to correct offset and gain coefficients and linearity over temperature. A second-order compensation can be enabled for temperature coefficients of gain or offset or bridge linearity. The ZSC31010 communicates via ZMDI’s ZACwire™ serial interface to the host computer and is easily mass calibrated in a Windows® environment. Once calibrated, the output pin Sig™ can provide selectable 0 to 1 V, rail-to-rail ratiometric analog output, or digital serial output of bridge data with optional temperature data.

     

Available Support    

Features 

Digital compensation of sensor offset, sensitivity, temperature drift, and non-linearity



Accommodates differential sensor signal spans, from 3 mV/V to 105 mV/V





ZACwire™ One-Wire Interface (OWI)





Internal temperature compensation and detection via bandgap PTAT (proportional to absolute temperature)





Output options: rail-to-rail analog output voltage, absolute analog voltage, digital ZACwire™ OneWire Interface (OWI)



Optional sequential output of both temperature and bridge readings on ZACwire™ digital output



Fast response time, 1 ms (typical)



High voltage protection up to 30 V with external JFET



Chopper-stabilized true differential ADC



Buffered and chopper-stabilized output DAC

No external trimming components required Simple PC-controlled configuration and calibration via ZACwire™ One-Wire Interface High accuracy (±0.1% FSO @ -25 to 85°C; ±0.25% FSO @ -50 to 150°C) Single pass calibration – quick and precise Suitable for battery-powered applications Small SOP8 package

Development Kit available Mass Calibration Kit available Support for industrial mass calibration available Quick circuit customization possible for large production volumes

Physical Characteristics Supply voltage 2.7 to 5.5 V, with external JFET 5.5V to 30 V Current consumption depending on adjusted sample rate: 0.25 mA to 1 mA Wide operational temperature: –50 to +150°C

ZSC31010 Application Circuit – Digital Output Vsupply +4.5 to +5.5 V

VDD Bsink

Sig™

OUT/OWI

ZSC31010

VBP

10nF

Vgate VBN VSS

0.1µF

Ground

For more information, contact ZMDI via SSC@zmdi.com. © 2013 Zentrum Mikroelektronik Dresden AG — Rev. 2.91 — November 1, 2013. All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. The information furnished in this publication is subject to changes without notice.

Visit www.zmdi.com for more detailed information

8

ZSC31010

RBicLite™ Analog Output Sensor Signal Conditioner

ZSC31010 Block Diagram

JFET (optional if supply is 2.7 to 5.5 V) S

0.1 F

Highly Versatile Applications in Many Markets Including       

2.7 to 5.5 V VDD

Temp.

Reference

Industrial

5.5 V to 30 V

Vgate

VDD Regulator

RBicLITE™ ZSC31010

DAC

VBP

Building Automation

INMUX

VBN

Office Automation

PREAMP

ADC

OUTBUF

EEPROM

DSP

ZACwireTM Interface

Bsink optional

White Goods

Power Save

Automotive

POR Osc.

Portable Devices

0 V to 1 V SIGTM Ratiometric Rail-to-Rail OWI/ ZACwireTM 1nF

Analog Block

VSS

Digital Block

Your Innovative Designs

Rail-to-Rail Ratiometric Voltage Output Applications

Absolute Analog Voltage Output Applications JFET

Vsupply

S

+2.7 to +5.5 V 1 Bsink 2 VBP

VSS 8

1 Bsink

SIGTM 7

3 N/C

VDD 6

4 VBN

Vgate 5

Optional Bsink

VSUPPLY

D

ZSC31010

OUT

2 VBP

10 nF 0.1 F

Optional Bsink

Vsupply

D

+5.5 to +30 V

VSS 8 SIGTM 7

3 N/C

VDD 6

4 VBN

Vgate 5

OUT

10 nF

ZSC31010

0.1 F

Ground

Ground

Ordering Examples (Please see section 11 in the data sheet for additional options.)

Sales Code

Description

Package

ZSC31010CEB

ZSC31010 Die — Temperature range: -50°C to +150°C

Unsawn on Wafer

ZSC31010CEC

ZSC31010 Die — Temperature range: -50°C to +150°C

Sawn on Wafer Frame

ZSC31010CEG1

ZSC31010 SOP8 (150 mil) — Temperature range: -50°C to +150°C

Tube: add “-T” to sales code Reel: add “-R”

ZSC31010KIT

ZSC31010 ZACwire™ SSC Evaluation Kit: Communication Board, SSC Board, Sensor Replacement Board, USB Cable, 5 IC Samples

Kit

Sales and Further Information

www.zmdi.com

SSC@zmdi.com

Zentrum Mikroelektronik Dresden AG Global Headquarters Grenzstrasse 28 01109 Dresden, Germany

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA

Central Office: Phone +49.351.8822.0 Fax +49.351.8822.600

USA Phone +855.275.9634 Phone +408.883.6310 Fax +408.883.6358

European Technical Support Phone +49.351.8822.7.772 Fax +49.351.8822.87.772

DISCLAIMER: This information applies to a product under development. Its characteristics and specifications are subject to change without notice.

Zentrum Mikroelektronik Dresden AG (ZMD AG) assumes no obligation regarding future manufacture unless otherwise agreed to in writing. The information furnished hereby is believed to be true and accurate. However, under no circumstances shall ZMD AG be liable to any customer, licensee, or any other third party for any special, indirect, incidental, or consequential damages of any kind or nature whatsoever arising out of or in any way related to the furnishing, performance, or use of this technical data. ZMD AG hereby expressly disclaims any liability of ZMD AG to any customer, licensee or any other third party, and any such customer, licensee and any other third party hereby waives any liability of ZMD AG for any damages in connection with or arising out of the furnishing, performance or use of this technical data, whether based on contract, warranty, tort (including negligence), strict liability, or otherwise.

European Sales (Stuttgart) Phone +49.711.674517.55 Fax +49.711.674517.87955

Zentrum Mikroelektronik Dresden AG, Japan Office 2nd Floor, Shinbashi Tokyu Bldg.

4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan

ZMD FAR EAST, Ltd. 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

Phone +81.3.6895.7410 Fax +81.3.6895.7301

Phone +886.2.2377.8189 Fax +886.2.2377.8199

Zentrum Mikroelektronik Dresden AG, Korea Office U-space 1 Building 11th Floor, Unit JA-1102 670 Sampyeong-dong Bundang-gu, Seongnam-si Gyeonggi-do, 463-400 Korea Phone +82.31.950.7679 Fax +82.504.841.3026

Global Corporate Catalog

© 2013 Zentrum Mikroelektronik Dresden AG— Rev. 2.91 — November 1, 2013 All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.

9

Products available at ZMDI On-Line Store

ZSC31014

RBiciLiteTM Digital Output Sensor Signal Conditioner

ZSC31014

RBiciLiteTM Digital Output Sensor Signal Conditioner

Brief Description

Benefits

The ZSC31014 is a CMOS integrated circuit for highly accurate amplification and analog-to-digital conversion of differential and half-bridge input signals. The ZSC31014 can compensate the meast nd st sured signal for offset, 1 and 2 order span, and 1 nd and 2 order temperature (Tco and Tcg). It is well suited for sensor-specific correction of bridge sensors. Digital compensation of signal offset, sensitivity, temperature drift, and non-linearity is accomplished via an internal digital signal processor running a correction algorithm with calibration coefficients stored in a non-volatile EEPROM.



The ZSC31014 is adjustable to nearly all piezoresistive bridge sensors. Measured and corrected bridge values are provided at digital output pins, 2 which can be configured as I C™* or SPI. The digital 2 I C™ interface can be used for a simple PCcontrolled calibration procedure to program calibration coefficients into an on-chip EEPROM. The calibrated ZSC31014 and a specific sensor are mated digitally: fast, precise, and without the cost overhead associated with trimming by external devices or laser trimming.

Available Support

The ZSC31014’s integrated diagnostics functions are well suited for safety-critical applications.

Features  

  

 

High accuracy (±0.1% FSO @ -25 to +85°C; ±0.25% FSO @ -40 to +125°C) nd 2 order charge-balancing analog-to-digital converter provides low noise, 14-bit data at sample rates exceeding 2kHz Fast power-up to data output response: 3ms at 4MHz Digital compensation of sensor offset, sensitivity, temperature drift, and non-linearity Eight programmable analog gain settings combine with a digital gain term; accommodates bridges with spans <1mV/V and high offset Internal temperature compensation for sensor correction and for corrected temperature output 48-bit customer ID field for module traceability

 

 

  

Simple PC-controlled configuration and single2 pass digital calibration via I C™ interface – quick and precise; SPI option for measurement mode Eliminates need for external trimming components On-chip diagnostic features add safety to the application (e.g., EEPROM signature, bridge connection checks, bridge short detection).

Low-power Sleep Mode lengthens battery life Enables multiple sensor networks

Evaluation Kit Application Notes Mass Calibration Solution

Physical Characteristics     

Wide supply voltage capability: 2.7V to 5.5V Current consumption as low as 70μA depending on programmed sample rate Low-power Sleep Mode (<2μA @ 25°C) Operation temperature: -40°C to +125°C Small SOP8 package 2

ZSC31014 Application: I C™ Interface, Low-Power Bsink Option, Internal Temperature Correction Vsupply

ZSC31014 VSS BSINK

(2.7V to 5.5V)

VDD INT/SS

VBP

SDA/MISO

VBN

SCL/SCLK

0.1µF

GND

* I2C™ is a trademark of NXP.

For more information, contact ZMDI via SSC@zmdi.com. © 2013 Zentrum Mikroelektronik Dresden AG — Rev. 1.63 — December 10, 2013. All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. The information furnished in this publication is subject to changes without notice.

Visit www.zmdi.com for more detailed information

10

ZSC31014

RBiciLiteTM Digital Output Sensor Signal Conditioner

ZSC31014 Block Diagram

0.1µF

RBiciLite™

Temperature

Reference

Sensor

Applications:

VBP

Medical: infusion pumps, blood pressure meters, air mattresses, apnea monitors

(2.7V - 5.5V)

POR/Oscillator

ZSC31014

Diagnostics

Industrial: building automation, data loggers, pressure meters, leak detection monitoring

VDD

A

D

VBN PreAmp

INMUX

14-Bit ADC

Optional Bsink

White Goods / Appliances: fluid level, refrigerant

Bsupply

Consumer: body monitors, portable monitors, desktop weather stations, bathroom scales, toys/games

EEPROM w/ Charge Pump & Checksum

DSP Core

INT/SS

I2C or SPI Interface

SDA/MISO SCL/SCLK

VSS

Application: Half-Bridge Voltage Measurement

Application: Generic Differential A2D Converter

Vsupply 5V

ZSC31014

ZSC31014 e.g. HIH4000

VSS

VSS BSINK

VDD

Differential Signal from Any Source

BSINK INT/SS O VBP SDA/MISO U VBN T/

SCL/SCLK

V Supply

VDD INT/SS

VBP

SDA/MISO

VBN

SCL/SCLK 0 .1 µF

0.1µF

GND

GND

Ordering Examples (Refer to section 10 in the data sheet for additional options.)

Sales Code

Description

Package

ZSC31014EAB

ZSC31014 Die — Temperature range: -40°C to +125°C

Unsawn on Wafer

ZSC31014EAC

ZSC31014 Die — Temperature range: -40°C to +125°C

Sawn on Wafer Frame

ZSC31014EAG1

ZSC31014 SOP8 (150 mil) — Temperature range: -40° to +125°C

Tube: add “-T” to sales code / Reel: add “-R”

ZSC31014KIT

ZSC31014 SSC Evaluation Kit: Communication Board, SSC Board, Sensor Replacement Board, USB Cable, 5 IC Samples (software can downloaded on www.zmdi.com/zsc31014)

Kit

Sales and Further Information

SSC@zmdi.com

Zentrum Mikroelektronik Dresden AG Global Headquarters Grenzstrasse 28 01109 Dresden, Germany

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA

Central Office: Phone +49.351.8822.0 Fax +49.351.8822.600

USA Phone +855.275.9634 Phone +408.883.6310 Fax +408.883.6358

European Technical Support Phone +49.351.8822.7.772 Fax +49.351.8822.87.772

DISCLAIMER: This information applies to a product under development. Its characteristics and specifications are subject to change without notice.

Zentrum Mikroelektronik Dresden AG (ZMD AG) assumes no obligation regarding future manufacture unless otherwise agreed to in writing. The information furnished hereby is believed to be true and accurate. However, under no circumstances shall ZMD AG be liable to any customer, licensee, or any other third party for any special, indirect, incidental, or consequential damages of any kind or nature whatsoever arising out of or in any way related to the furnishing, performance, or use of this technical data. ZMD AG hereby expressly disclaims any liability of ZMD AG to any customer, licensee or any other third party, and any such customer, licensee and any other third party hereby waives any liability of ZMD AG for any damages in connection with or arising out of the furnishing, performance or use of this technical data, whether based on contract, warranty, tort (including negligence), strict liability, or otherwise.

European Sales (Stuttgart) Phone +49.711.674517.55 Fax +49.711.674517.87955

11

www.zmdi.com Zentrum Mikroelektronik Dresden AG, Japan Office 2nd Floor, Shinbashi Tokyu Bldg.

4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan

ZMD FAR EAST, Ltd. 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

Phone +81.3.6895.7410 Fax +81.3.6895.7301

Phone +886.2.2377.8189 Fax +886.2.2377.8199

Zentrum Mikroelektronik Dresden AG, Korea Office U-space 1 Building 11th Floor, Unit JA-1102 670 Sampyeong-dong Bundang-gu, Seongnam-si Gyeonggi-do, 463-400 Korea Phone +82.31.950.7679 Fax +82.504.841.3026

Global Corporate Catalog

© 2013 Zentrum Mikroelektronik Dresden AG — Rev. 1.63 — December 10, 2013 All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.

Products available at ZMDI On-Line Store

ZSC31015

RBicdLite™ Analog Output Sensor Signal Conditioner w/ Diagnostic Features

ZSC31015

RBicdLite™ Analog Output Sensor Signal Conditioner w/ Diagnostic Features

Brief Description

Benefits

The ZSC31015 is adjustable to nearly all piezoresistive bridge sensors. Measured and corrected bridge values are provided at the SIG™ pin, which can be configured as an analog voltage output or as a one-wire serial digital output.



No external trimming components required



Simple PC-controlled configuration and calibration via one-wire interface



The digital one-wire interface (OWI) can be used for a simple PC-controlled calibration procedure to program a set of calibration coefficients into an on-chip EEPROM. The calibrated ZSC31015 and a specific sensor are mated digitally: fast, precise, and without the cost overhead associated with trimming by external devices or laser. Integrated diagnostics functions make the ZSC31015 particularly well suited for automotive applications.*

High accuracy: ±0.1% FSO @ -25 to 85°C; ±0.25% FSO @ -50 to 150°C



Single-pass calibration – quick and precise

Features  



    

   

Digital compensation of sensor offset, sensitivity, temperature drift, and non-linearity Programmable analog gain and digital gain; accommodates bridges with spans < 1mV/V and high offset Many diagnostic features on chip (e.g., EEPROM signature, bridge connection checks, bridge short detection, power loss detection) Independently programmable high and low clipping levels 24-bit customer ID field for module traceability Internal temperature compensation reference (no external components) Option for external temperature compensation with addition of single diode Output options: rail-to-rail ratiometric analog voltage (12-bit resolution), absolute analog voltage, digital one-wire interface Fast power-up to data out response; output available 5ms after power-up Current consumption depends on programmed sample rate: 1mA down to 250A (typical) Fast response time: 1ms (typical) High voltage protection up to 30V with external JFET

Available Support 

Evaluation Kit available



Mass Calibration System available Support for industrial mass calibration available

 

Quick circuit customization possible for large production volumes

Physical Characteristics 

Wide operation temperature: –50°C to +150°C



Supply voltage 2.7 to 5.5V; with external JFET, 5.5 to 30V



Small SOP8 package

ZSC31015 Application Circuit Vsupply

+2.7 to +5.5 V

VDD SIG™

OUT/OWI

ZSC31015

VBP

Vgate VBN VSS

0.1 F Ground

* Not AEC-Q100-qualified.

For more information, contact ZMDI via SSC@zmdi.com.

Visit www.zmdi.com for more detailed information

© 2013 Zentrum Mikroelektronik Dresden AG — Rev. 2.11— December 11, 2013. All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. The information furnished in this publication is subject to changes without notice.

12

ZSC31015

RBicdLite™ Analog Output Sensor Signal Conditioner w/ Diagnostic Features

ZSC31015 Block Diagram

JFET1 (Optional if supply is 2.7 to 5.5 V) S

0.1 F

Highly Versatile Applications in Many Markets Including       

Industrial Building Automation Office Automation White Goods Automotive * Portable Devices Your Innovative Designs

VDD (2.7 to 5.5 V)

Sensor Diagnostics

PTAT

Temperature Reference

Vgate

VDD Regulator

VBP

INMUX

PREAMP

Power Save

EEPROM with Charge Pump

Ext Temp (Optional)

Bsink

POR/Oscillator Analog Block Digital Block

RBicdLite

12-Bit DAC

ZSC31015

A

VBN Optional Ext. Diode for Temp

5.5 V to 30 V VSUPPLY

D

_

D

14-Bit ADC Digital Core

SIGTM

+

0 V to 1 V Ratiometric Rail-to-Rail OWI/ZACwireTM

OUTBUF1

ZACwireTM Interface

Power Lost Diagnostic

VSS

* Not AEC-Q100-qualified.

Rail-to-Rail Ratiometric Voltage Output Applications

Absolute Analog Voltage Output Applications BSS169

Vsupply

S

+2.7 to +5.5 V 1 Bsink

VSS 8

2 VBP

SigTM 7

3 ExtTemp 4 VBN

VSS 8

2 VBP

SigTM 7

3 ExtTemp

VDD 6 Vgate 5

ZSC31015

Optional Bsink

OUT

1 Bsink

4 VBN

0.1 F

Optional Bsink

D

Vsupply +5.5 to +30 V

OUT

VDD 6 Vgate 5 0.1 F

ZSC31015

Ground

Ground

Ordering Examples (See section 11 of the data sheet for additional temperature range options.)

Sales Code

Description

Package

ZSC31015EEB

ZSC31015 Die — Temperature range: -50°C to +150°C

Unsawn on Wafer

ZSC31015EEC

ZSC31015 Die — Temperature range: -50°C to +150°C

Sawn on Wafer Frame

ZSC31015EEG1

ZSC31015 SOP8 (150 mil) — Temperature range: -50°C to +150°C

Tube: add “-T” to sales code. Reel: add “-R”

ZSC31015KIT

ZSC31015 ZACwire™ SSC Evaluation Kit: Communication Board, SSC Board, Sensor Replacement Board, USB Cable, 5 IC Samples (SOP8 150mil)

Kit

(ZACwire™ SSC Evaluation Software can be downloaded from www.zmdi.com/zsc31015)

Sales and Further Information

SSC@zmdi.com

Zentrum Mikroelektronik Dresden AG Global Headquarters Grenzstrasse 28 01109 Dresden, Germany

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA

Central Office: Phone +49.351.8822.0 Fax +49.351.8822.600

USA Phone +855.275.9634 Phone +408.883.6310 Fax +408.883.6358

European Technical Support Phone +49.351.8822.7.772 Fax +49.351.8822.87.772

DISCLAIMER: This information applies to a product under development. Its characteristics and specifications are subject to change without notice.

Zentrum Mikroelektronik Dresden AG (ZMD AG) assumes no obligation regarding future manufacture unless otherwise agreed to in writing. The information furnished hereby is believed to be true and accurate. However, under no circumstances shall ZMD AG be liable to any customer, licensee, or any other third party for any special, indirect, incidental, or consequential damages of any kind or nature whatsoever arising out of or in any way related to the furnishing, performance, or use of this technical data. ZMD AG hereby expressly disclaims any liability of ZMD AG to any customer, licensee or any other third party, and any such customer, licensee and any other third party hereby waives any liability of ZMD AG for any damages in connection with or arising out of the furnishing, performance or use of this technical data, whether based on contract, warranty, tort (including negligence), strict liability, or otherwise.

European Sales (Stuttgart) Phone +49.711.674517.55 Fax +49.711.674517.87955

13

www.zmdi.com Zentrum Mikroelektronik Dresden AG, Japan Office 2nd Floor, Shinbashi Tokyu Bldg.

4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan

ZMD FAR EAST, Ltd. 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

Phone +81.3.6895.7410 Fax +81.3.6895.7301

Phone +886.2.2377.8189 Fax +886.2.2377.8199

Zentrum Mikroelektronik Dresden AG, Korea Office U-space 1 Building 11th Floor, Unit JA-1102 670 Sampyeong-dong Bundang-gu, Seongnam-si Gyeonggi-do, 463-400 Korea Phone +82.31.950.7679 Fax +82.504.841.3026

Global Corporate Catalog

© 2013 Zentrum Mikroelektronik Dresden AG — Rev. 2.11 — December 11, 2013 All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.

Products available at ZMDI On-Line Store

ZSC31050

Advanced Differential Sensor Signal Conditioner

ZSC31050

Advanced Differential Sensor Signal Conditioner

Brief Description ZSC31050 is a CMOS integrated circuit for highly accurate amplification and sensor-specific correction of bridge sensor and temperature sensor signals.

The device provides digital compensation of sensor offset, sensitivity, temperature drift, and non-linearity via a 16-bit RISC microcontroller running a polynomial correction algorithm.

The ZSC31050 accommodates virtually any bridge sensor type (e.g., piezo-resistive, ceramic thick-film, or steel membrane based). In addition, it can interface to a separate temperature sensor. The bi-direc2 tional digital interfaces (I C™*, SPI, and ZACwire™) can be used for a simple PC-controlled one-pass calibration procedure to program a set of calibration coefficients into an on-chip EEPROM. A specific sensor and a ZSC31050 can be mated digitally: fast, precise and without the cost overhead associated with trimming by external devices or laser. The ZACwire™ interface enables an end-of-line calibration of the sensor module.

Typical applications for the ZSC31050 include industrial, medical, and consumer products. It is specifically engineered for most resistive bridge sensors; e.g., sensors for measuring pressure, force, torque, acceleration, angle, position, and revolution.

Features  Digital compensation of sensor offset, sensitivity,    

    

temperature drift, and nonlinearity Accommodates nearly all resistive bridge sensor types (signal spans from 1mV/V up to 275mV/V) Digital one-pass calibration: quick and precise Selectable compensation temperature source: bridge, thermistor, or internal or external diode Output options: voltage (0 to 5V), current 2 (4 to 20mA), PWM, I C™, SPI, ZACwire™ (one-wire interface), alarm Adjustable output resolution (up to 15 bits) versus sampling rate (up to 3.9kHz) Current consumption: 2.5mA (typical) Selectable bridge excitation: ratiometric voltage, constant voltage, or constant current Input channel for separate temperature sensor Sensor connection and common mode check (sensor aging detection)

Physical Characteristics  Operation temperature -40 to +125°C (-40 to

+150°C de-rated, depending on product version)

 Supply voltage: 2.7 to 5.5 V; with external JFET:

5 to 40 V

Benefits  No external trimming components required  PC-controlled configuration and calibration via

 Available in SSOP16 package or as die

ZSC31050 Overview

digital bus interface – simple, low cost  High accuracy (±0.1% FSO @ -25 to 85°C; † ±0.25% FSO @ -40 to 125°C)

Available Support  Evaluation kit available

VCC

Sensor Module

ZSC31050

OUT

 Support for industrial mass calibration available  Quick circuit customization possible for large

production volumes

GND

* I22C™ is a trademark of NXP. †* I C™ is a trademark of NXP. † Digital output signal.

Digital output signal.

For more information, contact ZMDI via SSC@zmdi.com. © 2013 Zentrum Mikroelektronik Dresden AG — Rev. 1.14 — December 11, 2013 All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. The information furnished in this publication is subject to changes without notice.

Visit www.zmdi.com for more detailed information

14

ZSC31050

Advanced Differential Sensor Signal Conditioner

ZSC31050 Block Diagram Ext. Temp. Sens.

IR_TEMP

+

CTRL-REGS

VBR Gain Factor

VINP



VINN

Temp. Sens.

Select

PGA

MUX

SIF PCOMP

ADC Mode Offset Shift

RAM

ADC

CMC

Analog Front-End (AFE)

SCL SDA

EEPROM

DAC

FIO1

OUT / OWI

PWM

FIO2

IO1 IO2

Int. Temp. Sensor

External Temperature Sensor

Digital Section

Sensor Bridge

Typical Applications:

Interfaces

IN3

Consumer Goods     

Industrial Applications

Weight scales Flow meters Strain gauges Load meters HVAC

  

4-20mA transmitters Intelligent sensor networks Process automation Factory automation

Portable Devices  

Automotive Sensors*

Altimeters Blood pressure monitors

  

Oil pressure Temperature sensing Strain gauges

* Non-AEC-Q100

Ordering Information (Please refer to section 8 in the data sheet for additional options.)

Product Sales Code

Description

Package

ZSC31050FEB

ZSC31050 Die — Temperature range: -40°C to +150°C

Unsawn on Wafer

ZSC31050FEC

ZSC31050 Die — Temperature range: -40°C to +150°C

Sawn on Wafer Frame

ZSC31050 SSOP-16 — Temperature range: -40°C to +150°C

Tube: add “-T” to sales code Reel: add “-R”

ZSC31050KIT Evaluation Kit V3.0

Modular ZSC31050 SSC Evaluation Kit: three interconnecting boards, five ZSC31050 SSOP-16 samples

Kit

ZSC31050 Mass Calibration System V1.1

Modular Mass Calibration System (MSC) for ZSC31050: MCS boards, cable, connectors

Kit

ZSC31050FEG1

Sales and Further Information

www.zmdi.com

SSC@zmdi.com

Zentrum Mikroelektronik Dresden AG Global Headquarters Grenzstrasse 28 01109 Dresden, Germany

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA

Central Office: Phone +49.351.8822.0 Fax +49.351.8822.600

USA Phone +855.275.9634 Phone +408.883.6310 Fax +408.883.6358

European Technical Support Phone +49.351.8822.7.772 Fax +49.351.8822.87.772

DISCLAIMER: This information applies to a product under development. Its characteristics and specifications are subject to change without notice.

Zentrum Mikroelektronik Dresden AG (ZMD AG) assumes no obligation regarding future manufacture unless otherwise agreed to in writing. The information furnished hereby is believed to be true and accurate. However, under no circumstances shall ZMD AG be liable to any customer, licensee, or any other third party for any special, indirect, incidental, or consequential damages of any kind or nature whatsoever arising out of or in any way related to the furnishing, performance, or use of this technical data. ZMD AG hereby expressly disclaims any liability of ZMD AG to any customer, licensee or any other third party, and any such customer, licensee and any other third party hereby waives any liability of ZMD AG for any damages in connection with or arising out of the furnishing, performance or use of this technical data, whether based on contract, warranty, tort (including negligence), strict liability, or otherwise.

European Sales (Stuttgart) Phone +49.711.674517.55 Fax +49.711.674517.87955

Zentrum Mikroelektronik Dresden AG, Japan Office 2nd Floor, Shinbashi Tokyu Bldg.

4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan

ZMD FAR EAST, Ltd. 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

Phone +81.3.6895.7410 Fax +81.3.6895.7301

Phone +886.2.2377.8189 Fax +886.2.2377.8199

Zentrum Mikroelektronik Dresden AG, Korea Office U-space 1 Building 11th Floor, Unit JA-1102 670 Sampyeong-dong Bundang-gu, Seongnam-si Gyeonggi-do, 463-400 Korea Phone +82.31.950.7679 Fax +82.504.841.3026

© 2013 Zentrum Mikroelektronik Dresden AG — Rev. 1.14 — December 11, 2013 All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.

Global Corporate Catalog

15

Products available at ZMDI On-Line Store

ZSC31150

Fast Automotive Sensor Signal Conditioner

ZSC31150

Fast Automotive Sensor Signal Conditioner

Brief Description

Benefits

The ZSC31150 is a CMOS integrated circuit for highly accurate amplification and sensor-specific correction of bridge sensor signals. Digital compensation of sensor offset, sensitivity, temperature drift, and non-linearity is accomplished via an internal 16-bit RISC microcontroller running a correction algorithm, with calibration coefficients stored in an EEPROM.



The ZSC31150 is adjustable to nearly all bridge sensor types. Measured values are provided at the analog voltage output or at the digital ZACwire™ and I²C™* interface. The digital interface can be used for a simple PC-controlled calibration procedure in order to program a set of calibration coefficients into an on-chip EEPROM. A specific sensor and a ZSC31150 can be mated digitally: fast, precise, and without the cost overhead associated with trimming by external devices or a laser.

Features    

        

Digital compensation of sensor offset, sensitivity, temperature drift, and non-linearity Adjustable to nearly all bridge sensor types Analog gain of up to 420, overall gain up to 2000 Output options: ratiometric analog voltage output (5% to 95% maximum, 12.4-bit resolution) or ZACwire™ (digital one-wire-interface) Temperature compensation: internal or external diode, bridge resistance, thermistor Sensor biasing by voltage or constant current Sample rate: up to 7.8kHz High voltage protection up to 33V Supply current: max. 5.5mA Reverse polarity and short-circuit protection Wide operation temperature depending on part number: up to -40 to +150°C Traceability by user-defined EEPROM entries Safety and diagnostic functions

 

  

No external trimming components required Only a few external protection devices needed PC-controlled configuration and single pass calibration via I²C™ or ZACwire™ interface: simple, cost efficient, quick, and precise End-of-line calibration via I²C™ or ZACwire™ interface High accuracy (0.25% FSO @ -25 to 85°C; 0.5% FSO @ -40 to 125°C) The ZSC31150 is optimized for automotive environments by its special protection circuitry and excellent electromagnetic compatibility

Available Support   

Evaluation Kits Application Notes Mass Calibration System

Physical Characteristics  



Supply voltage: 4.5 to 5.5 V Operation temperature: -40°C to 125°C (-40°C to +150°C de-rated, depending on product version) Available as DFN14 (5mmx4mm) or SSOP14

ZSC31150 Application Circuit VCC

Sensor Module

ZSC31150

OUT

GND

* I²C™ is a trademark of NXP.

For more information, contact ZMDI via SSC@zmdi.com.

Visit www.zmdi.com for more detailed information

© 2013 Zentrum Mikroelektronik Dresden AG — Rev. 2.10— December 19, 2013 All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. The information furnished in this publication is subject to changes without notice.

16

ZSC31150

Fast Automotive Sensor Signal Conditioner

ZSC31150 Block Diagram

PGA

MUX

RAM

ADC

TS Analog Block

ZACwire™ I2C™

EEPROM

CMC

DAC

ROM

Digital Data I/O Analog Out

BAMP

ZSC31150

Digital Block

Ordering Information (Refer to section 8 in the data sheet for additional options.)

Product Sales Code

Description

Package

ZSC31150GAG2-R

ZSC31150 DFN14, 5mmx4mm—Temperature range: -40°C to 125°C

Tape & Reel

ZSC31150GEG2-R

ZSC31150 DFN14, 5mmx4mm—Temperature range: -40°C to 150°C

Tape & Reel

ZSC31150GAG1

ZSC31150 SSOP14—Temperature range: -40°C to +125°C

Tube: add “-T” to sales code Reel: add “-R”

ZSC31150GEG1

ZSC31150 SSOP14—Temperature range: -40°C to +150°C

Tube: add “-T” to sales code Reel: add “-R”

ZSC31150GLG1

ZSC31150 SSOP14—Temperature range: -40°C to +150°C (Long life: 5000h @150°C)

Tube: add “-T” to sales code Reel: add “-R”

ZSC31150KIT Evaluation ZSC31150 SSC Evaluation Kit: 3 interconnecting boards, 5 ZSC31150 Kit Kit V1.0 SSOP14 samples, USB cable (software can be downloaded from product page at www.zmdi.com/zsc31150) ZSC31150 Mass Calibration System V1.1

Modular Mass Calibration System (MSC) for ZSC31150: MCS boards, cable, connectors (software can be downloaded from product page)

Sales and Further Information

www.zmdi.com

Kit

SSC@zmdi.com

Zentrum Mikroelektronik Dresden AG Global Headquarters Grenzstrasse 28 01109 Dresden, Germany

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA

Central Office: Phone +49.351.8822.0 Fax +49.351.8822.600

USA Phone +855.275.9634 Phone +408.883.6310 Fax +408.883.6358

European Technical Support Phone +49.351.8822.7.772 Fax +49.351.8822.87.772

DISCLAIMER: This information applies to a product under development. Its characteristics and specifications are subject to change without notice.

Zentrum Mikroelektronik Dresden AG (ZMD AG) assumes no obligation regarding future manufacture unless otherwise agreed to in writing. The information furnished hereby is believed to be true and accurate. However, under no circumstances shall ZMD AG be liable to any customer, licensee, or any other third party for any special, indirect, incidental, or consequential damages of any kind or nature what soever arising out of or in any way related to the furnishing, performance, or use of this technical data. ZMD AG hereby expressly disclaims any liability of ZMD AG to any customer, licensee or any other third party, and any such customer, licensee and any other third party hereby waives any liab ility of ZMD AG for any damages in connection with or arising out of the furnishing, performance or use of this technical data, whether based on contract, warranty, tort (including negligence), strict liability, or otherwise.

European Sales (Stuttgart) Phone +49.711.674517.55 Fax +49.711.674517.87955

Zentrum Mikroelektronik Dresden AG, Japan Office 2nd Floor, Shinbashi Tokyu Bldg.

4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan

ZMD FAR EAST, Ltd. 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

Phone +81.3.6895.7410 Fax +81.3.6895.7301

Phone +886.2.2377.8189 Fax +886.2.2377.8199

Zentrum Mikroelektronik Dresden AG, Korea Office U-space 1 Building 11th Floor, Unit JA-1102 670 Sampyeong-dong Bundang-gu, Seongnam-si Gyeonggi-do, 463-400 Korea Phone +82.31.950.7679 Fax +82.504.841.3026

Global Corporate Catalog

© 2013 Zentrum Mikroelektronik Dresden AG — Rev. 2.10— December 19, 2013 All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.

17

Products available at ZMDI On-Line Store

ZSSC3015

RBicdLite-Auto™ Sensor Signal Conditioner with Diagnostics

ZSSC3015

RBicdLite-Auto™ Sensor Signal Conditioner with Diagnostics

Brief Description

Benefits

The ZSSC3015 sensor signal conditioner is adjustable to nearly all piezo-resistive bridge sensors.

Measured and corrected bridge values are provided at the Sig™ pin, which can be configured as an analog voltage output or as a one-wire serial digital output.



No external trimming components required



PC-controlled configuration and calibration via ZACwire™ one-wire interface – simple, low cost



High accuracy (as high as ±0.1% FSO @ -25 to 85°C; ±0.25% FSO @ -50 to 150°C)



Single-pass calibration – quick and precise

The ZACwire™ digital one-wire interface (OWI) can be used for a simple PC-controlled calibration procedure to program a set of calibration coefficients into an on-chip EEPROM. The calibrated ZSSC3015 and a specific sensor are mated digitally: fast, precise, and without the cost overhead associated with trimming by external devices or laser. Integrated diagnostics functions make the ZSSC3015 IC particularly well suited for automotive applications.

Features  



    

    

Digital compensation of sensor offset, sensitivity, temperature drift, and nonlinearity Programmable analog gain and digital gain; accommodates bridges with spans < 1mV/V and high offset Many diagnostic features on chip (e.g., EEPROM signature, bridge connection checks, bridge short detection, power loss detection) Independently programmable high and low clipping levels 24-bit customer ID field for module traceability Internal temperature compensation reference (no external components) Option for external temperature compensation with addition of single diode Output options: rail-to-rail ratiometric analog voltage (12-bit resolution), absolute analog voltage, ZACwire™ digital one-wire interface Fast power-up to data out response; output available 5ms after power-up Current consumption depends on programmed sample rate and mode: 1mA down to 300µA (typ.)

Fast response time: 1.4ms typical High voltage protection: ≤ 30V with external JFET AEC-Q100 qualified

Visit www.zmdi.com for more detailed information

Available Support 

Evaluation Kit available



Mass Calibration System available



Support for industrial mass calibration available



Quick circuit customization possible for large production volumes

Physical Characteristics 

Wide operation temperature: –50°C to +150°C



Supply voltage 2.7 to 5.5V; with external JFET, 5.5 to 30V



Small SOP8 package

ZSSC3015 Application Circuit Vsupply

+2.7 to +5.5 V

VDD Sig™

OUT/OWI

ZSSC3015

VBP

Vgate VBN VSS

0.1 F Ground

For more information, contact ZMDI via SSC@zmdi.com.

© 2013 Zentrum Mikroelektronik Dresden AG — Rev. 1.11 —December 11, 2013 All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. The information furnished in this publication is subject to changes without notice.

18

ZSSC3015

RBicdLite-Auto™ Sensor Signal Conditioner with Diagnostics

ZSSC3015 Block Diagram

JFET1 (Optional if supply is 2.7 to 5.5 V) S

0.1 F

Highly Versatile Applications in Many Markets Including

VDD (2.7 to 5.5 V)

Sensor Diagnostics

 Industrial  Building Automation

PTAT

Temperature Reference

Vgate

Voltage Reference

VBP Optional Ext. Diode for Temp

 White Goods

INMUX

PREAMP

Power Save

EEPROM with Charge Pump

ExtTemp (Optional)

Bsink

 Automotive

POR/Oscillator

 Portable Devices  Your Innovative Designs

Analog Block Digital Block

Rail-to-Rail Ratiometric Voltage Output Applications

RBicdLite-Auto

12-Bit DAC

ZSSC3015

A

VBN

 Office Automation

5.5 V to 30 V VSUPPLY

D

_

D

14-Bit ADC Digital Core

SigTM

+

ZACwireTM Interface

Power Lost Diagnostic

VSS

Absolute Analog Voltage Output Applications BSS169

Vsupply

S

+2.7 to +5.5 V 1 Bsink 2 VBP 3 ExtTemp 4 VBN

VSS 8 Sig

TM

VDD 6

1 Bsink

VSS 8

2 VBP

SigTM 7

3 ExtTemp

Vgate 5

ZSSC3015

Optional Bsink

OUT

7

0 V to 1 V Ratiometric Rail-to-Rail OWI/ZACwireTM

OUTBUF1

Optional Bsink

Vsupply +5.5 to +30 V

OUT

VDD 6 Vgate 5

4 VBN

0.1 F

D

ZSSC3015

0.1 F

Ground

Ground

Part Ordering Examples (See section 11 in the data sheet for additional options.)

Sales Code

Description

Package

ZSSC3015NE1B

ZSSC3015 Die — Temperature range: -50°C to +150°C

Unsawn on Wafer

ZSSC3015NE1C

ZSSC3015 Die — Temperature range: -50°C to +150°C

Sawn on Wafer Frame

ZSSC3015NE2T(R) ZSSC3015 SOP8 (150 mil) — Temperature range: -50°C to +150°C ZSSC3015KIT

ZSSC3015 SSC Evaluation Kit: Communication Board, SSC Board, Sensor Replacement Board, USB cable, 5 IC samples, instructions for downloading SSC Evaluation Software

Sales and Further Information

Kit

www.zmdi.com

SSC@zmdi.com

Zentrum Mikroelektronik Dresden AG Global Headquarters Grenzstrasse 28 01109 Dresden, Germany

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA

Central Office: Phone +49.351.8822.0 Fax +49.351.8822.600

USA Phone +855.275.9634 Phone +408.883.6310 Fax +408.883.6358

European Technical Support Phone +49.351.8822.7.772 Fax +49.351.8822.87.772

DISCLAIMER: This information applies to a product under development. Its characteristics and specifications are subject to change without notice.

Zentrum Mikroelektronik Dresden AG (ZMD AG) assumes no obligation regarding future manufacture unless otherwise agreed to in writing. The information furnished hereby is believed to be true and accurate. However, under no circumstances shall ZMD AG be liable to any customer, licensee, or any other third party for any special, indirect, incidental, or consequential damages of any kind or nature whatsoever arising out of or in any way related to the furnishing, performance, or use of this technical data. ZMD AG hereby expressly disclaims any liability of ZMD AG to any customer, licensee or any other third party, and any such customer, licensee and any other third party hereby waives any liability of ZMD AG for any damages in connection with or arising out of the furnishing, performance or use of this technical data, whether based on contract, warranty, tort (including negligence), strict liability, or otherwise.

European Sales (Stuttgart) Phone +49.711.674517.55 Fax +49.711.674517.87955

19

Tube: add “-T” to sales code. Reel: add “-R”

Zentrum Mikroelektronik Dresden AG, Japan Office 2nd Floor, Shinbashi Tokyu Bldg.

4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan

ZMD FAR EAST, Ltd. 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

Phone +81.3.6895.7410 Fax +81.3.6895.7301

Phone +886.2.2377.8189 Fax +886.2.2377.8199

Zentrum Mikroelektronik Dresden AG, Korea Office U-space 1 Building 11th Floor, Unit JA-1102 670 Sampyeong-dong Bundang-gu, Seongnam-si Gyeonggi-do, 463-400 Korea Phone +82.31.950.7679 Fax +82.504.841.3026

Global Corporate Catalog

© 2013 Zentrum Mikroelektronik Dresden AG — Rev. 1.11—December 11, 2013 All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.

Products available at ZMDI On-Line Store

ZSSC3131

Sensor Signal Conditioner for Cost-Optimized Switch Applications

ZSSC3131

Sensor Signal Conditioner for Cost-Optimized Switch Applications

Brief Description

Benefits

The ZSSC3131 is a member of the ZSSC313x product family of CMOS integrated circuits designed for automotive/ industrial sensor applications. All family members are well suited for highly-accurate amplification and sensor-specific correction of resistive bridge sensor signals. An internal 16-bit RISC microcontroller running a correction algorithm compensates sensor offset, sensitivity, temperature drift, and non-linearity of the connected sensor element. The required calibration coefficients are stored by the one-pass calibration procedure in an on-chip EEPROM.



The ZSSC3131 is optimized for simple switch and cost-sensitive sensor applications. The integrated adjustable digital filter enables building fast-switching real-time applications as well as stabilized applications for switching input signals that are unstable or disrupted.

Features 

     

     

Adjustable to nearly all resistive bridge sensor types: maximum analog gain of 105; maximum overall gain of 420 Sample rate up to 200 Hz ADC resolution 13/14 bit Internal temperature compensation Integrated adjustable digital filter Digital compensation of sensor offset, sensitivity, temperature drift, and non-linearity Output options: ratiometric analog voltage output (5 - 95% maximum, 12.4 bit resolution) or TM ZACwire (digital One-Wire Interface (OWI)) Sensor biasing by voltage High voltage protection up to 33 V Supply current: Max. 5.5mA Reverse polarity and short circuit protection Wide operation temperature range: -40 to +150°C Traceability by user-defined EEPROM entries 2

* Note: I C™ is a trademark of NXP. ** FSO = Full Scale Output.

  

 

Family approach offers the best fitting IC selection to build cost-optimized applications No external trimming components required Low number of external components needed PC-controlled configuration and One-Pass/ endof-line calibration via I²C™* or ZACwire™ interface: Simple, cost-efficient, quick, and precise High accuracy (0.25% FSO** @ -25 to +85°C; 0.5% FSO @ -40 to +125°C) Optimized for automotive/industrial environments due to robust protection circuitries, excellent electromagnetic compatibility, and AEC-Q100 qualification

Available Support   

Evaluation Kits Application Notes Mass Calibration System

Physical Characteristics  



Supply voltage 4.5 to 5.5 V Operation temperature: -40°C to +125°C (-40°C to +150°C extended temperature range depending on product version) Available in RoHS-compliant JEDEC-SSOP14 package or delivery as die

ZSSC3131 Minimum Application Requirements VCC Sensor Module

ZSSC3131

OUT

GND

For more information, contact ZMDI via SSC@zmdi.com. © 2014 Zentrum Mikroelektronik Dresden AG — Rev.1.23 — April 15, 2014. All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. The information furnished in this publication is subject to changes without notice.

Visit www.zmdi.com for more detailed information

20

ZSSC3131

Sensor Signal Conditioner for Cost-Optimized Switch Applications

ZSSC3131 Switch Application Example Out

9 AOUT 10 VBN 11 VBR_B 12 VBP

C5

VDD 6

ZSSC3131

Sensor Bridge

C4

VDDE 7

VSUPP

+4.5V to +5.5V

VSUPP

n.c. 5 SCL 4

GND

R1 2kΩ

Out

SDA 3

13 VBR_T

VSSA 2

14 N.C.

VDDA 1

12 VSUPP 13 GPIO

µC

8 VSSE

C3 47nF

C2 100nF

14 GND

C1 100nF

Ordering Information (See data sheet section 8 for complete delivery options.)

Product Sales Code

Description

Package

ZSSC3131BE1

ZSSC3131 die – tested; temperature range -40 to +150°C

Unsawn wafer: add “B” to sales code Die on frame: add “C” to sales code

ZSSC3131BA1

ZSSC3131 die – tested; temperature range -40 to +125°C

Unsawn wafer: add “B” to sales code Die on frame: add “C” to sales code

ZSSC3131BE2

ZSSC3131 SSOP14 – temperature range -40 to +150°C

Tube: add “T” to sales code Tape & Reel: add “R”

ZSSC3131BA2

ZSSC3131 SSOP14 – temperature range -40 to +125°C

Tube: add “T” to sales code Tape & Reel: add “R”

ZSSC313xKITV1.1

ZSSC313x Evaluation Kit, revision 1.1, including Evaluation Board, ZSSC3131 IC samples, USB cable (software can be downloaded from the product page www.zmdi.com/zssc3131)

Kit

ZSSC313x Mass Calibration System V1.1

Modular Mass Calibration System (MSC) for ZSSC313x including MCS boards, cable, connectors (software can be downloaded from the product page www.zmdi.com/zssc3131)

Kit

Sales and Further Information

www.zmdi.com

SSC@zmdi.com

Zentrum Mikroelektronik Dresden AG Global Headquarters Grenzstrasse 28 01109 Dresden, Germany

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA

Central Office: Phone +49.351.8822.0 Fax +49.351.8822.600

USA Phone +855.275.9634 Phone +408.883.6310 Fax +408.883.6358

European Technical Support Phone +49.351.8822.7.772 Fax +49.351.8822.87.772

DISCLAIMER: This information applies to a product under development. Its characteristics and specifications are subject to change without notice.

Zentrum Mikroelektronik Dresden AG (ZMD AG) assumes no obligation regarding future manufacture unless otherwise agreed to in writing. The information furnished hereby is believed to be true and accurate. However, under no circumstances shall ZMD AG be liable to any customer, licensee, or any other third party for any special, indirect, incidental, or consequential damages of any kind or nature whatsoever arising out of or in any way related to the furnishing, performance, or use of this technical data. ZMD AG hereby expressly disclaims any liability of ZMD AG to any customer, licensee or any other third party, and any such customer, licensee and any other third party hereby waives any liability of ZMD AG for any damages in connection with or arising out of the furnishing, performance or use of this technical data, whether based on contract, warranty, tort (including negligence), strict liability, or otherwise.

European Sales (Stuttgart) Phone +49.711.674517.55 Fax +49.711.674517.87955

Zentrum Mikroelektronik Dresden AG, Japan Office 2nd Floor, Shinbashi Tokyu Bldg.

4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan

ZMD FAR EAST, Ltd. 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

Phone +81.3.6895.7410 Fax +81.3.6895.7301

Phone +886.2.2377.8189 Fax +886.2.2377.8199

Zentrum Mikroelektronik Dresden AG, Korea Office U-space 1 Building 11th Floor, Unit JA-1102 670 Sampyeong-dong Bundang-gu, Seongnam-si Gyeonggi-do, 463-400 Korea Phone +82.31.950.7679 Fax +82.504.841.3026

Global Corporate Catalog

© 2014 Zentrum Mikroelektronik Dresden AG — Rev.1.23 — April 15, 2014.

All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.

21

Products available at ZMDI On-Line Store

ZSSC3135

Sensor Signal Conditioner for Piezoresistive Bridge Sensors

ZSSC3135

Sensor Signal Conditioner for Piezoresistive Bridge Sensors

Brief Description

Benefits

The ZSSC3135 is a member of the ZSSC313x family of CMOS integrated circuits designed for automotive/industrial sensor applications. All family members are well suited for highly accurate amplification and sensor-specific correction of resistive bridge sensor signals. An internal 16-bit RISC microcontroller running a correction algorithm compensates sensor offset, sensitivity, temperature drift, and non-linearity of the connected sensor element. The required calibration coefficients are stored by the one-pass calibration procedure in an on-chip EEPROM.



The ZSSC3135 is specially designed for piezoresistive bridge sensor elements. The amplification stage with an analog gain of 105 in combination with optional temperature compensation via an external temperature sensor meets or exceeds the requirements of piezoresistive sensor applications.

Features 

     

     

Adjustable to nearly all resistive bridge sensor types: analog gain of up to 105, maximum overall gain of 420 Sample rate up to 200 Hz ADC resolution 13/14 bit Safety functionality sensor connection External temperature sensor Digital compensation of sensor offset, sensitivity, temperature drift, and non-linearity Output options: ratiometric analog voltage output (5 - 95% maximum, 12.4 bit resolution) or ZACwire™ (digital One-Wire Interface (OWI)) Sensor biasing by voltage High voltage protection up to 33 V Supply current: max. 5.5mA Reverse polarity and short circuit protection Wide operation temperature range: -40 to +150°C Traceability by user-defined EEPROM entries * Note: I2C™ is a trademark of NXP. ** FSO = Full Scale Output.

  

 

Family approach offers the best fitting IC selection to build cost-optimized applications No external trimming components required Low number of external components needed PC-controlled configuration and one-pass/ TM end-of-line calibration via I²C™* or ZACwire interface: simple, cost-efficient, quick, and precise High accuracy: 0.25% FSO** @ -25 to +85°C; 0.5% FSO @ -40 to +125°C Optimized for automotive/industrial environments due to robust protection circuitries, excellent electromagnetic compatibility and AEC-Q100 qualification

Available Support   

Evaluation Kits Application Notes Mass Calibration System

Physical Characteristics  



Supply voltage: 4.5 to 5.5 V Operation temperature: -40°C to +125°C (-40°C to +150°C extended temperature range depending on product version) Available in RoHS-compliant JEDEC-SSOP14 package or delivery as die

ZSSC3135 Minimum Application Requirements VCC Sensor Module

ZSSC3135

OUT

GND

For more information, contact ZMDI via SSC@zmdi.com. © 2014 Zentrum Mikroelektronik Dresden AG — Rev. 1.23—April 15, 2014. All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. The information furnished in this publication is subject to changes without notice.

Visit www.zmdi.com for more detailed information

22

ZSSC3135

Sensor Signal Conditioner for Piezoresistive Bridge Sensors

ZSSC3135 Application Example Out / OWI

Sensor Bridge

8 VSSE

VDDE

7

9 AOUT

VDD

6

n.c.

5

SCL

4

SCL

SDA 3

SDA

10 VBN 11 VBR_B 12 VBP R1

C4

C5

ZSSC3135

C3 47nF

GND

C2 100nF

+4.5V to +5.5V

VSUPP

Serial Interface

13 VBR_T

VSSA 2

14 IRTEMP

VDDA 1

C1 100nF

Temperature Sensor

Ordering Information (See data sheet section 8 for complete delivery options.)

Product Sales Code

Description

Package

ZSSC3135BE1

ZSSC3135 die – tested; temperature range -40 to +150°C

Unsawn wafer: add “B” to sales code Die on frame: add “C” to sales code

ZSSC3135BA1

ZSSC3135 die – tested; temperature range -40 to +125°CC

Unsawn wafer: add “B” to sales code Die on frame: add “C” to sales code

ZSSC3135BE2

ZSSC3135 SSOP14 – temperature range -40 to +150°C

Tube: add “T” to sales code Tape & Reel: add “R”

ZSSC3135BA2

ZSSC3135 SSOP14 – temperature range -40 to +125°C

Tube: add “T” to sales code Tape & Reel: add “R”

ZSSC313xKITV1.1

ZSSC313x Evaluation Kit, revision 1.1 including Evaluation Board, ZSSC3135 IC samples, USB cable (software can be downloaded from the product page www.zmdi.com/zssc3135)

Kit

ZSSC313x Mass Calibration System V1.1

Modular Mass Calibration System (MSC) for ZSSC313x including MCS boards, cable, connectors (software can be downloaded from the product page www.zmdi.com/zssc3135)

Kit

Sales and Further Information

www.zmdi.com

SSC@zmdi.com

Zentrum Mikroelektronik Dresden AG Global Headquarters Grenzstrasse 28 01109 Dresden, Germany

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA

Central Office: Phone +49.351.8822.0 Fax +49.351.8822.600

USA Phone +855.275.9634 Phone +408.883.6310 Fax +408.883.6358

European Technical Support Phone +49.351.8822.7.772 Fax +49.351.8822.87.772

DISCLAIMER: This information applies to a product under development. Its characteristics and specifications are subject to change without notice.

Zentrum Mikroelektronik Dresden AG (ZMD AG) assumes no obligation regarding future manufacture unless otherwise agreed to in writing. The information furnished hereby is believed to be true and accurate. However, under no circumstances shall ZMD AG be liable to any customer, licensee, or any other third party for any special, indirect, incidental, or consequential damages of any kind or nature whatsoever arising out of or in any way related to the furnishing, performance, or use of this technical data. ZMD AG hereby expressly disclaims any liability of ZMD AG to any customer, licensee or any other third party, and any such customer, licensee and any other third party hereby waives any liability of ZMD AG for any damages in connection with or arising out of the furnishing, performance or use of this technical data, whether based on contract, warranty, tort (including negligence), strict liability, or otherwise.

European Sales (Stuttgart) Phone +49.711.674517.55 Fax +49.711.674517.87955

Zentrum Mikroelektronik Dresden AG, Japan Office 2nd Floor, Shinbashi Tokyu Bldg.

4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan

ZMD FAR EAST, Ltd. 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

Phone +81.3.6895.7410 Fax +81.3.6895.7301

Phone +886.2.2377.8189 Fax +886.2.2377.8199

Zentrum Mikroelektronik Dresden AG, Korea Office U-space 1 Building 11th Floor, Unit JA-1102 670 Sampyeong-dong Bundang-gu, Seongnam-si Gyeonggi-do, 463-400 Korea Phone +82.31.950.7679 Fax +82.504.841.3026

Global Corporate Catalog

© 2014 Zentrum Mikroelektronik Dresden AG — Rev. 1.23—April 15, 2014 All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.

23

Products available at ZMDI On-Line Store

ZSSC3136

Sensor Signal Conditioner for Safety Switch Applications

ZSSC3136

Sensor Signal Conditioner for Safety Switch Applications

Brief Description

Benefits

The ZSSC3136 is a member of the ZSSC313x family of CMOS integrated circuits for automotive/ industrial sensor applications. All family members are well suited for highly accurate amplification and sensor-specific correction of resistive bridge sensor signals. An internal 16-bit RISC microcontroller running a correction algorithm compensates sensor offset, sensitivity, temperature drift, and non-linearity of the connected sensor element. The required calibration coefficients are stored by the one-pass calibration procedure in an on-chip EEPROM.

    



The ZSSC3136 is optimized for SIL (Safety Integrity Level) rated switch applications. The integrated adjustable digital filter offers the possibility of setting up fast switching real-time applications as well as stabilized switching applications in the case of disturbed or unstable input signals.



In addition to the general features for switch applications, the ZSSC3136 offers the capability to set up safety-relevant SIL2 rated switches due to its extended safety functionalities.



Features        

     

Analog gain of 105, maximum overall gain of 420 Sample rate: 200 Hz maximum ADC resolution: 13/14 bit External temperature sensor Safety functionalities: Calibration microcontroller, sensor connection, analog front-end Adjustable to nearly all resistive bridge sensor types Digital compensation of sensor offset, sensitivity, temperature drift, and non-linearity Output options: ratiometric analog voltage output (5 - 95% in maximum, 12.4 bit resolution) or TM ZACwire (digital One-Wire Interface (OWI)) Sensor biasing by voltage High voltage protection up to 33 V Supply current: max. 5.5mA Reverse polarity and short circuit protection Wide operation temperature: -40 to +150°C Traceability by user-defined EEPROM entries * Note: I2C™ is a trademark of NXP. ** FSO = Full Scale Output.

Visit www.zmdi.com for more detailed information

Capability for setting up SIL level 2 applications Application-focused feature set No external trimming components required Only a few external protection devices needed PC-controlled configuration and one-pass/ TM end-of-line calibration via I²C™* or ZACwire interface: simple, cost-efficient, quick, and precise High accuracy (0.25% FSO** @ -25 to +85°C; 0.5% FSO @ -40 to +125°C) Optimized for automotive/ industrial environment due to robust protection circuitries, excellent electromagnetic compatibility and AEC-Q100 qualification

Available Support  

Evaluation Kits Application Notes Mass Calibration System

Physical Characteristics Supply voltage 4.5 to 5.5 V  Operation temperature: -40°C to +125°C (-40°C to +150°C extended temperature range depending on product version)  Available in RoHS-compliant JEDEC-SSOP14 package or delivery as die 

ZSSC3136 Minimum Application Requirements

VCC Sensor Module

ZSSC3136

OUT

GND

For more information, contact ZMDI via SSC@zmdi.com.

© 2014 Zentrum Mikroelektronik Dresden AG — Rev.1.23 — April 15, 2014. All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. The information furnished in this publication is subject to changes without notice.

24

ZSSC3136

Sensor Signal Conditioner for Safety Switch Applications

ZSSC3136 Switch Application Example Out

VDDE 7

9 AOUT

VDD 6

10 VBN 11 VBR_B 12 VBP R1

C4

C5

VSUPP

+4.5V to +5.5V

VSUPP

n.c. 5

R1 2kΩ

12 VSUPP

SCL 4 Out SDA 3

13 GPIO

µC

Sensor Bridge

8 VSSE

ZSSC3136

C3 47nF

GND

C2 100nF

14 GND

13 VBR_T

VSSA 2

14 IRTEMP

VDDA 1

C1 100nF

Temperature Sensor

Ordering Information (See data sheet section 8 for complete delivery options.)

Product Sales Code

Description

Package

ZSSC3136BE1

ZSSC3136 die – tested; temperature range -40 to +150°C

Unsawn wafer: add “B” to sales code Die on frame: add “C” to sales code

ZSSC3136BA1

ZSSC3136 die – tested; temperature range -40 to +125°C

Unsawn wafer: add “B” to sales code Die on frame: add “C” to sales code

ZSSC3136BE2

ZSSC3136 SSOP14 – temperature range -40 to +150°C

Tube: add “T” to sales code Tape & Reel: add “R”

ZSSC3136BA2

ZSSC3136 SSOP14 – temperature range -40 to +125°C

Tube: add “T” to sales code Tape & Reel: add “R”

ZSSC313xKITV1.1

ZSSC313x Evaluation Kit, revision 1.1, including Evaluation Board, ZSSC3136 IC samples, USB cable (software can be downloaded from the product page www.zmdi.com/zssc3136)

Kit

ZSSC313x Mass Calibration Modular Mass Calibration System (MSC) for ZSSC313x including System V1.1 MCS boards, cable, connectors (software can be downloaded from the product page www.zmdi.com/zssc3136)

Kit

Sales and Further Information

www.zmdi.com

Zentrum Mikroelektronik Dresden AG Global Headquarters Grenzstrasse 28 01109 Dresden, Germany

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA

Central Office: Phone +49.351.8822.0 Fax +49.351.8822.600

USA Phone +855.275.9634 Phone +408.883.6310 Fax +408.883.6358

European Technical Support Phone +49.351.8822.7.772 Fax +49.351.8822.87.772 Sales *European Note: I2C™ is a (Stuttgart) trademark of **Phone FSO +49.711.674517.55 = Full Scale Output.

Fax

+49.711.674517.87955

SSC@zmdi.com

Zentrum Mikroelektronik Dresden AG, Japan Office 2nd Floor, Shinbashi Tokyu Bldg.

4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan

ZMD FAR EAST, Ltd. 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

Phone +81.3.6895.7410 Fax +81.3.6895.7301

Phone +886.2.2377.8189 Fax +886.2.2377.8199

Zentrum Mikroelektronik Dresden AG, Korea Office U-space 1 Building 11th Floor, Unit JA-1102 670 Sampyeong-dong Bundang-gu, Seongnam-si Gyeonggi-do, 463-400 Korea Phone +82.31.950.7679 Fax +82.504.841.3026

DISCLAIMER: This information applies to a product under development. Its characteristics and specifications are subject to change without notice.

Zentrum Mikroelektronik Dresden AG (ZMD AG) assumes no obligation regarding future manufacture unless otherwise agreed to in writing. The information furnished hereby is believed to be true and accurate. However, under no circumstances shall ZMD AG be liable to any customer, licensee, or any other third party for any special, indirect, incidental, or consequential damages of any kind or nature whatsoever arising out of or in any way related to the furnishing, performance, or use of this technical data. ZMD AG hereby expressly disclaims any liability of ZMD AG to any NXP. customer, licensee or any other third party, and any such customer, licensee and any other third party hereby waives any liability of ZMD AG for any damages in connection with or arising out of the furnishing, performance or use of this technical data, whether based on contract, warranty, tort (including negligence), strict liability, or otherwise.

Global Corporate Catalog

© 2014 Zentrum Mikroelektronik Dresden AG — Rev.1.23 — April 15, 2014 All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.

25

Products available at ZMDI On-Line Store

ZSSC3138

Sensor Signal Conditioner for Ceramic Sensor Applications

ZSSC3138

Sensor Signal Conditioner for Ceramic Sensor Applications

Brief Description

Benefits

The ZSSC3138 is a member of the ZSSC313x product family of CMOS integrated circuits designed for automotive/ industrial sensor applications. All family members are well suited for highly accurate amplification and sensor-specific correction of resistive bridge sensor signals. An internal 16-bit RISC microcontroller running a correction algorithm compensates sensor offset, sensitivity, temperature drift, and non-linearity of the connected sensor element. The required calibration coefficients are stored by the one-pass calibration procedure on chip (EEPROM).



Family approach offers the best fitting IC selection to build cost-optimized applications No external trimming components required Low number of external components needed PC-controlled configuration and one-pass/ end-of-line calibration via I²C™* or ZACwire™ interface: simple, cost efficient, quick, and precise High accuracy (0.25% FSO** @ -25 to +85°C; 0.5% FSO @ -40 to +125°C) Optimized for automotive/industrial environments due to robust protection circuitries, excellent electromagnetic compatibility and AEC-Q100 qualification

  

 

The ZSSC3138 offers a maximum analog gain of 420 and two offset compensation features. These fit perfectly with the requirements of ceramic thick-filmbased sensor elements as well as strain gauges.

The high amplification in combination with the offset compensation offers the capability to set up ceramic thick-film-based sensor applications without laser trimming, which leads to better long-term stability.

Available Support

Features

Physical Characteristics



     

     

Adjustable to nearly all resistive bridge sensor types, analog gain of 420, maximum overall gain of 1680 Enhanced sample rate: 7.8 kHz maximum High ADC resolution 15/16 bit Safety functionality sensor connection Internal temperature compensation Digital compensation of sensor offset, sensitivity, temperature drift, and non-linearity Output options: ratiometric analog voltage output (5 - 95% maximum, 12.4 bit resolution) or TM ZACwire (digital One-Wire Interface (OWI)) Sensor biasing by voltage High voltage protection up to 33 V Supply current: 5.5mA maximum Reverse polarity and short circuit protection Wide operation temperature range between -40 to +150°C Traceability by user-defined EEPROM entries

2 * Note: I C™ is a trademark of NXP. **** FSO FullFull Scale Output.

FSO= = Scale Output.

  

 



Evaluation Kits Application Notes Mass Calibration System

Supply voltage 4.5 to 5.5 V Operation temperature: -40°C to +125°C (-40°C to +150°C extended temperature range depending on product version) Available in RoHS-compliant JEDEC-SSOP14 package or delivery as die

ZSSC3138 Minimum Application Requirements VCC Sensor Module

ZSSC3138

OUT

GND

For more information, contact ZMDI via SSC@zmdi.com.

© 2014 Zentrum Mikroelektronik Dresden AG — Rev.1.23 — April 15, 2014. All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. The information furnished in this publication is subject to changes without notice.

Visit www.zmdi.com for more detailed information

26

ZSSC3138

Sensor Signal Conditioner for Ceramic Sensor Applications

ZSSC3138 Application Example Out / OWI

Sensor Bridge

8 VSSE

VDDE 7

9 AOUT

VDD 6

10 VBN 11 VBR_B 12 VBP

C4

C5

ZSSC3138

C3 47nF

GND

C2 100nF

+4.5V to +5.5V

VSUPP

n.c. 5 SCL 4

SCL

SDA 3

SDA

Serial Interface

13 VBR_T

VSSA 2

14 N.C.

VDDA 1

C1 100nF

Ordering Information (See data sheet section 8 for complete delivery options.)

Product Sales Code

Description

Package

ZSSC3138BE1

ZSSC3138 die – tested; temperature range -40 to +150°C

Unsawn wafer: add “B” to sales code Die on frame: add “C” to sales code

ZSSC3138BA1

ZSSC3138 die – tested; temperature range -40 to +125°C

Unsawn wafer: add “B” to sales code Die on frame: add “C” to sales code

ZSSC3138BE2

ZSSC3138 SSOP14 – temperature range -40 to +150°C

Tube: add “T” to sales code Tape & Reel: add “R”

ZSSC3138BA2

ZSSC3138 SSOP14 – temperature range -40 to +125°C

Tube: add “T” to sales code Tape & Reel: add “R”

ZSSC313xKITV1.1

ZSSC313x Evaluation Kit, version 1.1, including Evaluation Board, ZSSC3138 IC samples, USB cable

Kit

ZSSC313x Mass Calibration System V1.1

Modular Mass Calibration System (MSC) for ZSSC313x including MCS boards, cable, connectors

Kit

Sales and Further Information

www.zmdi.com

SSC@zmdi.com

Zentrum Mikroelektronik Dresden AG Global Headquarters Grenzstrasse 28 01109 Dresden, Germany

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA

Central Office: Phone +49.351.8822.0 Fax +49.351.8822.600

USA Phone +855.275.9634 Phone +408.883.6310 Fax +408.883.6358

European Technical Support Phone +49.351.8822.7.772 Fax +49.351.8822.87.772

DISCLAIMER: This information applies to a product under development. Its characteristics and specifications are subject to change without notice.

Zentrum Mikroelektronik Dresden AG (ZMD AG) assumes no obligation regarding future manufacture unless otherwise agreed to in writing. The information furnished hereby is believed to be true and accurate. However, under no circumstances shall ZMD AG be liable to any customer, licensee, or any other third party for any special, indirect, incidental, or consequential damages of any kind or nature whatsoever arising out of or in any way related to the furnishing, performance, or use of this technical data. ZMD AG hereby expressly disclaims any liability of ZMD AG to any customer, licensee or any other third party, and any such customer, licensee and any other third party hereby waives any liability of ZMD AG for any damages in connection with or arising out of the furnishing, performance or use of this technical data, whether based on contract, warranty, tort (including negligence), strict liability, or otherwise.

European Sales (Stuttgart) Phone +49.711.674517.55 Fax +49.711.674517.87955

Zentrum Mikroelektronik Dresden AG, Japan Office 2nd Floor, Shinbashi Tokyu Bldg.

4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan

ZMD FAR EAST, Ltd. 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

Phone +81.3.6895.7410 Fax +81.3.6895.7301

Phone +886.2.2377.8189 Fax +886.2.2377.8199

Zentrum Mikroelektronik Dresden AG, Korea Office U-space 1 Building 11th Floor, Unit JA-1102 670 Sampyeong-dong Bundang-gu, Seongnam-si Gyeonggi-do, 463-400 Korea Phone +82.31.950.7679 Fax +82.504.841.3026

Global Corporate Catalog

© 2014 Zentrum Mikroelektronik Dresden AG — Rev.1.23 — April 15, 2014 All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.

27

Products available at ZMDI On-Line Store

ZSSC3154

Automotive Sensor Signal Conditioner with Dual Analog Output

ZSSC3154

Automotive Sensor Signal Conditioner with Dual Analog Output

Brief Description

Benefits

The ZSSC3154 is an integrated circuit for highly accurate amplification and sensor-specific correction of a bridge sensor signal. Up to two temperature sensors can also be read in parallel.





The circuitry provides different configurations of the analog outputs to show two measurement results simultaneously. This also allows generating a complementary bridge sensor signal, which is often a requirement in safety-relevant applications.



The ZSSC3154 can measure and process two external temperature sensors to compensate the temperature drift of the bridge sensor signal and to output a separate temperature signal.



Available Support  

The single-pass, digital end-of-line calibration combined with the integrated broken-chip detection supports automatic and highly efficient mass production.



Features



     

 

Differential bridge sensor input Half-bridge sensor or temperature sensor input Digital compensation of offset, gain, nonlinearity, and temperature dependency Two analog outputs; behavior programmable by EEPROM configuration Sequential analog output mode provides two measurement values at one output pin On-chip diagnostic and safety features including sensor connection diagnostic and broken-chip detection 2 EEPROM words for arbitrary user data Multiple configurable output options

Evaluation Kit Application Notes Calculation Tools

Physical Characteristics      

Supply voltage: 4.5 to 5.5V Maximum supply voltage: 7.7V Input span: 1.8 to 267mV/V ADC resolution: 14 bit Output resolution: > 12 bit from 10% to 90% Operating temperature range: -40°C to 140°C Package: QFN32 5x5mm or die

ZSSC3154 Basic Circuit DFBH

VDDA

VTN2

VSSA

VTN1

SDA

VBR_T

VBP VBR_B VBN

ZSSC3154

An integrated calibration microcontroller with an onchip EEPROM performs the digital compensation of the sensor offset, the sensitivity, the temperature drift, and the nonlinearity of a sensor signal.



Bridge sensor signal validation for safety applications via two antivalent analog outputs or via half-bridge sensor measurement output Simultaneous measurement of sensor signals, including temperature signal for compensation and for temperature output Efficient use of non-calibrated elements for bridge sensors and temperature sensors without external trimming components Single-pass end-of-line calibration algorithm minimizes production costs Excellent EMC/ESD robustness and AEC-Q100 qualification

SCL VDD

VDDE

VCC

AOUT1

AOUT1

AOUT2

AOUT2

VSSE

GND

For more information, contact ZMDI via SSC@zmdi.com. © 2014 Zentrum Mikroelektronik Dresden AG — Rev. 1.31 — March 6, 2014 All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. The information furnished in this publication is subject to changes without notice.

Visit www.zmdi.com for more detailed information

28

ZSSC3154

Automotive Sensor Signal Conditioner with Dual Analog Output

ZSSC3154 Block Diagram External Temperature Sensor 2 External Temperature Sensor 1

Conditioning Coefficients

Temperature Sensor Select

Gain Factor

Offset Shift

ADC Mode

I2C™*

I2C™*

EEPROM

Diagnostic Fault Band Mode

RAM MUX

PGA

ADC Analog Front-End AFE

Sensor Bridge

Internal Temperature Sensor

CMC

DAC

ROM

ZACwire™

BAMP

AOUT2

BAMP

AOUT1 OWI (Digital Data IO)

Conditioning Calculation Digital Core

Conditioning Formula

Interfaces * I2C™ is a trademark of NXP.

Ordering Information Product Sales Code

Description

Package

ZSSC3154BA1B

ZSSC3154 Die - Temperature Range -40 to 125°C

Wafer

ZSSC3154BA1C

ZSSC3154 Die - Temperature Range -40 to 125°C

Sawn on frame

ZSSC3154BA3R

ZSSC3154 QFN32 5x5 mm - Temperature Range -40 to 125 °C

Reel

ZSSC3154BE3R

ZSSC3154 QFN32 5x5 mm - Temperature Range -40 to 140 °C

Reel

ZSSC3154KIT

ZSSC3154 SSC Evaluation Kit: Communication Board, SSC Board, Sensor Replacement, 5 QFN32 5x5 Samples (software can be downloaded from the product page www.zmdi.com/zssc3154)

Kit

Sales and Further Information

www.zmdi.com

SSC@zmdi.com

Zentrum Mikroelektronik Dresden AG Global Headquarters Grenzstrasse 28 01109 Dresden, Germany

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA

Central Office: Phone +49.351.8822.0 Fax +49.351.8822.600

USA Phone +855.275.9634 Phone +408.883.6310 Fax +408.883.6358

European Technical Support Phone +49.351.8822.7.772 Fax +49.351.8822.87.772

DISCLAIMER: This information applies to a product under development. Its characteristics and specifications are subject to change without notice.

Zentrum Mikroelektronik Dresden AG (ZMD AG) assumes no obligation regarding future manufacture unless otherwise agreed to in writing. The information furnished hereby is believed to be true and accurate. However, under no circumstances shall ZMD AG be liable to any customer, licensee, or any other third party for any special, indirect, incidental, or consequential damages of any kind or nature whatsoever arising out of or in any way related to the furnishing, performance, or use of this technical data. ZMD AG hereby expressly disclaims any liability of ZMD AG to any customer, licensee or any other third party, and any such customer, licensee and any other third party hereby waives any liability of ZMD AG for any damages in connection with or arising out of the furnishing, performance or use of this technical data, whether based on contract, warranty, tort (including negligence), strict liability, or otherwise.

European Sales (Stuttgart) Phone +49.711.674517.55 Fax +49.711.674517.87955

Zentrum Mikroelektronik Dresden AG, Japan Office 2nd Floor, Shinbashi Tokyu Bldg.

4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan

ZMD FAR EAST, Ltd. 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

Phone +81.3.6895.7410 Fax +81.3.6895.7301

Phone +886.2.2377.8189 Fax +886.2.2377.8199

Zentrum Mikroelektronik Dresden AG, Korea Office U-space 1 Building 11th Floor, Unit JA-1102 670 Sampyeong-dong Bundang-gu, Seongnam-si Gyeonggi-do, 463-400 Korea Phone +82.31.950.7679 Fax +82.504.841.3026

© 2014 Zentrum Mikroelektronik Dresden AG — Rev. 1.31 — March 6, 2014 All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.

Global Corporate Catalog

29

Products available at ZMDI On-Line Store

ZSSC3170

Automotive Sensor Signal Conditioner with LIN & PWM Interface

ZSSC3170

Automotive Sensor Signal Conditioner with LIN & PWM Interface

Brief Description

Benefits

The ZSSC3170 is a CMOS integrated circuit for highly accurate amplification and sensor specific correction of bridge sensor signals. Featuring a maximum analog gain of 420, as well as extended offset compensation capabilities, the ZSSC3170 is adjustable to nearly all resistive bridge sensor types.



Digital compensation of offset, sensitivity, temperature drift, and nonlinearity is accomplished via a 16-bit RISC microcontroller. Conditioning coefficients are stored in an EEPROM certified for automotive applications.

Measured values are provided by one of the digital LIN or PWM interfaces. Each interface can support end-of-line calibration using the sensor output. Noise sensitivity is greatly reduced because the calibration equipment and the ZSSC3170 are mated digitally.

For quick and easy evaluation and support for calibrating prototypes, ZMDI offers the ZSSC3170 SSC Evaluation Kit, which includes evaluation hardware, SSOP20 samples, and software.

    

Available Support   



   

   



Complies with LIN specifications 1.3 / 2.0 / 2.1 Configurable LIN publisher frame content Data conversion rate of up to 430Hz fully utilizes the maximum LIN channel capacity of 20kbit/s PWM high-side and low-side switches, support for LIN communication for end-of-line calibration Digital compensation of offset, gain, temperature nd rd effects up to 2 order, and nonlinearity up to 3 order. Compensation of temperature sensor offset, nd gain, and nonlinearity up to 2 order.

Internal or external temperature reference Media temperature sensing by diode or RTD Load dump protection of the LIN pin up to ±40V Accuracy ±0.25% FSO @ -20 to 85°C ±0.50% FSO @ -40 to 125°C ±1.00% FSO @ -40 to 150°C 3 EEPROM words available for optional user data

Visit www.zmdi.com for more detailed information

     

Supply voltage: 7 to 18 V Current consumption in Sleep Mode: ≤ 100μA Input span: 1.8 to 267 mV/V ADC resolution: 13 to 14 bit Output resolution: up to 12-bit (LIN and PWM) Operating temperature range: -40 to 125°C Extended operating temperature range: ≤150°C Package: SSOP20 or die

ZSSC3170 Basic Circuit LIN

GND VBAT

ZSSC3170



Evaluation Kit Application Notes Calculation Tools

Physical Characteristics 

Features

Measurand and temperature signal available via one output pin Compatible with nearly all resistive bridge inputs No external trimming components required Single-pass calibration minimizes calibration costs End-of-line calibration using sensor output Optimized for automotive environments with special protection circuitry, excellent electromagnetic compatibility, and numerous diagnostic features

For more information, contact ZMDI via SSC@zmdi.com.

© 2014 Zentrum Mikroelektronik Dresden AG — Rev. 2.40 — January 22, 2014. All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. The information furnished in this publication is subject to changes without notice.

30

ZSSC3170

Automotive Sensor Signal Conditioner with LIN & PWM Interface

ZSSC3170 Block Diagram Ext. Temp.

Diode

Ext. RTD



Sensor Bridge

+

SCL

I2CTM*

Control Registers

SDA

VBR_T Temp. Sens.

Select

VTN1 VBN VBP

MUX

Gain Factor

Offset Shift

ADC Mode

PGA

ADC

Analog Front-End (AFE) VTN2 VBR_B

CMC

EEPROM

Internal Temp.

Sensor

HOUT

PWM

RAM

Digital Block

LOUT

LIN

LIN

Protection & Power Management

VB VSSE

Interfaces

ZSSC3170

* I2C™ is a trademark of NXP.

Applications

LIN Pressure Sensor with Temperature Sensor LIN 11 LIN 12 LOUT 13 n.c.

14

VBN

15

VBR_B

16

VBP

17

VTN 1

18

VBR_T

19

VTN2

20

n.c.

VSSE

9

GND

VB

8

VBAT

HOUT 7

ZSSC3170

Sensor Bridge With Integrated Temperature Diode

C3 220pF

VSS 10

C2 220nF

R1 10W

VDD 6 SCL 5

SCL

SDA 4

SDA

RTD Media Temperature Sensor



VSSA 3 VDDA 2 n.c. 1

R2 C1 100nF

Ordering Information (See section 7 of the data sheet for additional options.)

Product Sales Code

Description

ZSSC3170EE1B

ZSSC3170 Die — Temperature range: -40°C to +150°C

ZSSC3170EE1C

ZSSC3170 Die — Temperature range: -40°C to +150°C

Sawn on Wafer Frame, 2450 pcs.

ZSSC3170EE2

ZSSC3170— SSOP20 — Temperature range: -40°C to +150°C

Add R for 13” reel, 2000 pcs.

Add T for tube, 660 pcs.

ZSSC3170EA1B

ZSSC3170 Die — Temperature range: -40°C to +125°C

Unsawn on Wafer, 2450 pcs.

ZSSC3170EA1C

ZSSC3170 Die — Temperature range: -40°C to +125°C

Sawn on Wafer Frame, 2450 pcs.

ZSSC3170KIT

ZSSC3170 Evaluation Kit and 5 SSOP20 samples

Kit

Sales and Further Information

www.zmdi.com

SSC@zmdi.com

Zentrum Mikroelektronik Dresden AG Global Headquarters Grenzstrasse 28 01109 Dresden, Germany

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA

Central Office: Phone +49.351.8822.0 Fax +49.351.8822.600

USA Phone +855.275.9634 Phone +408.883.6310 Fax +408.883.6358

European Technical Support Phone +49.351.8822.7.772 Fax +49.351.8822.87.772

DISCLAIMER: This information applies to a product under development. Its characteristics and specifications are subject to change without notice.

Zentrum Mikroelektronik Dresden AG (ZMD AG) assumes no obligation regarding future manufacture unless otherwise agreed to in writing. The information furnished hereby is believed to be true and accurate. However, under no circumstances shall ZMD AG be liable to any customer, licensee, or any other third party for any special, indirect, incidental, or consequential damages of any kind or nature whatsoever arising out of or in any way related to the furnishing, performance, or use of this technical data. ZMD AG hereby expressly disclaims any liability of ZMD AG to any customer, licensee or any other third party, and any such customer, licensee and any other third party hereby waives any liability of ZMD AG for any damages in connection with or arising out of the furnishing, performance or use of this technical data, whether based on contract, warranty, tort (including negligence), strict liability, or otherwise.

European Sales (Stuttgart) Phone +49.711.674517.55 Fax +49.711.674517.87955

31

Package Unsawn on Wafer, 2450 pcs.

Zentrum Mikroelektronik Dresden AG, Japan Office 2nd Floor, Shinbashi Tokyu Bldg.

4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan

ZMD FAR EAST, Ltd. 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

Phone +81.3.6895.7410 Fax +81.3.6895.7301

Phone +886.2.2377.8189 Fax +886.2.2377.8199

Zentrum Mikroelektronik Dresden AG, Korea Office U-space 1 Building 11th Floor, Unit JA-1102 670 Sampyeong-dong Bundang-gu, Seongnam-si Gyeonggi-do, 463-400 Korea Phone +82.31.950.7679 Fax +82.504.841.3026

Global Corporate Catalog

© 2014 Zentrum Mikroelektronik Dresden AG — Rev. 2.40 — January 22, 2014 All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.

Products available at ZMDI On-Line Store

ZSSC3122

cLite™ Low Voltage Capacitive Sensor Signal Conditioner

ZSSC3122

cLite™ Low Voltage Capacitive Sensor Signal Conditioner

Brief Description

Benefits

The ZSSC3122 is a CMOS integrated circuit for accurate capacitance-to-digital conversion and sensor-specific correction of capacitive sensor signals. Digital compensation of sensor offset, sensitivity, and temperature drift is accomplished via an internal digital signal processor running a correction algorithm with calibration coefficients stored in a non-volatile EEPROM. The ZSSC3122 is configurable for capacitive sensors with capacitances up to 10pF and a sensitivity of 125aF/LSB. It is compatible with both single capacitive sensors (both terminals must be accessible) and differential capacitive sensors.

Measured and corrected sensor values can be 2 * output as I C™ , SPI, PDM, or alarms.

2 The I C™ interface can be used for a simple PCcontrolled calibration procedure to program a set of calibration coefficients into an on-chip EEPROM. The calibrated ZSSC3122 and a specific sensor are mated digitally: fast, precise, and without the cost overhead of trimming by external devices or laser.



Features   

    

Maximum Target input capacitance: 10pF Sampling rates as fast as 0.7ms at 8-bit resolution; 1.6ms at 10-bit; 5.0ms at 12-bit; 18.5ms at14-bit st Digital compensation of sensor: piece-wise 1 nd and 2 order sensor compensation or up to rd 3 order single-region sensor compensation st nd Digital compensation of 1 and 2 order temperature gain and offset drift Internal temperature compensation reference (no external components) Programmable capacitance span and offset Layout customized for die-die bonding with sensor for low-cost, high-density chip-on-board assembly † Accuracy as high as ±0.25% FSO@ -40 to 125°C, 3V, 5V, Vsupply ±10%



Minimized calibration costs: no laser trimming, one-pass calibration using a digital interface Excellent for low-power battery applications

Interfaces   

I²C™ or SPI interface—easy connection to a µC PDM outputs (Filtered Analog Ratiometric) for both capacitance and temperature Up to two alarms that can act as full push-pull or open-drain switches

Physical Characteristics     

Supply voltage: 1.8 to 5.5V Typical current consumption 650μA down to 60μA depending on configuration Typical Sleep Mode current: ≤ 1μA at 85°C Operation temperature: –40°C to +125°C Die or TSSOP14 package

Available Support 

 

ZSSC3122 SSC Evaluation Kit available: SSC Evaluation Board, samples, software, documentation.

Support for industrial mass calibration available.

Quick circuit customization option for large production volumes.

Application: Digital Output, Alarms VSUPPLY

VDD

(+1.8V to 5.5V)

0.1µF

0.1µF

Vcore

cLite™

ZSSC3122 Ready

VSS

GND

SDA/MISO SCL/SCLK

C0

SS Alarm_High

CC

* †

Alarm_Low

I2C™ is a registered trademark of NXP. See data sheet section 1.3 for restrictions.

Visit www.zmdi.com for more detailed information

© 2013 Zentrum Mikroelektronik Dresden AG — Rev. 1.52 — December 11, 2013. All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. The information furnished in this publication is subject to changes without notice.

32

ZSSC3122

cLite™ Low Voltage Capacitive Sensor Signal Conditioner

ZSSC3122

ZSSC3122 cLite™ Low Voltage Capacitive Sensor Signal Conditioner VDD (1.8V to 5.5V)

Block Diagram

Vcore

Temp Sensor

0.1µF

Ref Cap

Offset Cap

EEPROM

CLK/Reset

Ready

SCL/SCLK SDA/MISO

PDM 0.1µF

Sensor

C/A

C0

C0

CC

C1

C1

D

MUX

ROM Analog Core

Application: Analog Output

0.1µF

Vcore

0.1µF

ZSSC3122 PDM_C

Low Alarm

PDM_T C0

Application: Differential Capacitance Input V

SUPPLY (+1.8V to 5.5V)

VSUPPLY

VDD

(+1.8V to 5.5V)

0.1µF

Cap. Analog Output

Vcore

0.1µF

GND

Temp Analog Output

cLite™

ZSSC3122 Ready

VSS

SDA/MISO

C0

SCL/SCLK

CC

LED CC

Alarm_High

Output Communication

Digital Core

VSS

GND

SS

High Alarm

VSS

cLite™

Alarm_Low/PDM_T

DSP

CDC

(Optional)

VDD

Ready/PDM_C

I2C / SPI

C1

Alarm_High

SS Alarm_High Alarm_Low

Ordering Codes Sales Code

Description

Package

ZSSC3122AA1B

ZSSC3122 die — Temperature range: -40°C to +125°C

Tested dice on un-sawn wafer

ZSSC3122AI1B

ZSSC3122 die — Temperature range: -40°C to +85°C

Tested dice on un-sawn wafer

ZSSC3122AA1C

ZSSC3122 die — Temperature range: -40°C to +125°C

Tested dice on frame

ZSSC3122AI1C

ZSSC3122 die — Temperature range: -40°C to +85°C

Tested dice on frame

ZSSC3122AA2

ZSSC3122 TSSOP14 — Temperature range: -40°C to +125°C – Lead-free package

Tube: add “T” to code; reel: add “R”

ZSSC3122AI2

ZSSC3122 TSSOP14 — Temperature range: -40°C to +85°C – Lead-free package

Tube: add “T” to code; reel: add “R”

ZSSC3122KIT

Kit ZSSC3122 SSC Evaluation Kit: Communication Board, SSC Board, Sensor Replacement Board, USB Cable, 5 IC Samples (software can be downloaded from www.zmdi.com/zssc3122)

Sales and Further Information Zentrum Mikroelektronik Dresden AG Global Headquarters Grenzstrasse 28 01109 Dresden, Germany Central Office: Phone +49.351.8822.0 Fax +49.351.8822.600

European Technical Support Phone +49.351.8822.7.772 Fax +49.351.8822.87.772 European Sales (Stuttgart) Phone +49.711.674517.55 Fax +49.711.674517.87955

www.zmdi.com

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA USA Phone +855.275.9634 Phone +408.883.6310 Fax +408.883.6358

SSC@zmdi.com

Zentrum Mikroelektronik Dresden AG, Japan Office 2nd Floor, Shinbashi Tokyu Bldg.

4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan

ZMD FAR EAST, Ltd. 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

Phone Fax

Phone Fax

+81.3.6895.7410 +81.3.6895.7301

+886.2.2377.8189 +886.2.2377.8199

Zentrum Mikroelektronik Dresden AG, Korea Office U-space 1 Building 11th Floor, Unit JA-1102 670 Sampyeong-dong Bundang-gu, Seongnam-si Gyeonggi-do, 463-400 Korea Phone +82.31.950.7679 Fax +82.504.841.3026

DISCLAIMER: This information applies to a product under development. Its characteristics and specifications are subject to change without notice. Zentrum Mikroelektronik Dresden AG (ZMD AG) assumes no obligation regarding future manufacture unless otherwise agreed to in writing. The information furnished hereby is believed to be true and accurate. However, under no circumstances shall ZMD AG be liable to any customer, licensee, or any other third party for any special, indirect, incidental, or consequential damages of any kind or nature whatsoever arising out of or in any way related to the furnishing, performance, or use of this technical data. ZMD AG hereby expressly disclaims any liability of ZMD AG to any customer, licensee or any other third party, and any such customer, licensee and any other third party hereby waives any liability of ZMD AG for any damages in connection with or arising out of the furnishing, performance or use of this technical data, whether based on contract, warranty, tort (including negligence), strict liability, or otherwise.

Global Corporate Catalog

© 2013 Zentrum Mikroelektronik Dresden AG — Rev. 1.52 — December 11, 2013 All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.

33

Products available at ZMDI On-Line Store

ZSSC3123

cLite™ Capacitive Sensor Signal Conditioner

ZSSC3123

cLite™ Capacitive Sensor Signal Conditioner

Brief Description

Benefits

The ZSSC3123 is a CMOS integrated circuit for accurate capacitance-to-digital conversion and sensor-specific correction of capacitive sensor signals. Digital compensation of sensor offset, sensitivity, and temperature drift is accomplished via an internal digital signal processor running a correction algorithm with calibration coefficients stored in a non-volatile EEPROM. The ZSSC3123 is configurable for capacitive sensors with capacitances up to 260pF and a sensitivity of 125aF/LSB to 1pF/LSB depending on resolution, speed, and range settings. It is compatible with both single capacitive sensors (both terminals must be accessible) and differential capacitive sensors. Measured and corrected 2 sensor values can be output as I C™*, SPI, PDM, or alarms.

2 The I C™ interface can be used for a simple PC-controlled calibration procedure to program a set of calibration coefficients into an on-chip EEPROM. The calibrated ZSSC3123 and a specific sensor are mated digitally: fast, precise, and without the cost overhead of trimming by external devices or laser.



Minimized calibration costs: no laser trimming, onepass calibration using a digital interface



Wide capacitance range to support a broad portfolio of different sensor elements Excellent for low-power battery applications

Features   

    

Maximum Target input capacitance: 260pF Sampling rates as fast as 0.7ms at 8-bit resolution; 1.6ms at 10-bit; 5.0ms at 12-bit; 18.5ms at 14-bit st nd Digital compensation of sensor: piece-wise 1 and 2 rd order sensor compensation or up to 3 order singleregion sensor compensation st nd Digital compensation of 1 and 2 order temperature gain and offset drift Internal temperature compensation reference (no external components) Programmable capacitance span and offset Layout customized for die-die bonding with sensor for low-cost, high-density chip-on-board assembly † Accuracy as high as ±0.25% FSO@ -40 to 125°C, 3V, 5V, Vsupply ±10%



Interfaces 

I²C™ or SPI interface—easy connection to a µC



PDM outputs (Filtered Analog Ratiometric) for both capacitance and temperature



Up to two alarms that can act as full push-pull or opendrain switches

Physical Characteristics



Supply voltage: 2.3V to 5.5V Typical current consumption 650μA down to 60μA depending on configuration Typical Sleep Mode current: ≤ 1μA at 85°C

 

Operation temperature: –40°C to +125°C Die or TSSOP14 package

 

Available Support 

ZSSC3123 SSC Evaluation Kit available: SSC Evaluation Board, samples, software, documentation.

 

Support for industrial mass calibration available.

Quick circuit customization option for large production volumes.

Application: Digital Output, Alarms

VSUPPLY

VDD

(2.3V to 5.5V)

0.1µF

0.1µF

Vcore

cLite™

ZSSC3123 Ready

VSS

GND

SDA/MISO SCL/SCLK SS

C0

Alarm_High CC

Alarm_Low

* I2C™ is a registered trademark of NXP. † See data sheet section 1.3 for restrictions.

For more information, contact us at SSC@zmdi.com.

Visit www.zmdi.com for more detailed information

© 2013 Zentrum Mikroelektronik Dresden AG — Rev. 1.62 — December 11, 2013. All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. The information furnished in this publication is subject to changes without notice.

34

ZSSC3123

cLite™ Capacitive Sensor Signal Conditioner

ZSSC3123

ZSSC3123 cLite™ Capacitive Sensor Signal Conditioner

Block Diagram

VDD (2.3V to 5.5V) Vcore

Temp Sensor

0.1µF

Ref Cap

Offset Cap

EEPROM

CLK/Reset

Ready

SCL/SCLK SDA/MISO

PDM 0.1µF

Sensor

C/A

C0

C0

CC

C1

C1

MUX

0.1µF

0.1µF

ZSSC3123 PDM_C

Low Alarm

ROM Analog Core

Application: Analog Output

Vcore

Alarm_Low/PDM_T

DSP

PDM_T C0

Application: Differential Capacitance Input V

SUPPLY (+2.3V to 5.5V)

VSUPPLY

VDD

(+2.3V to 5.5V)

0.1µF

Cap. Analog Output

0.1µF

GND

Temp Analog Output

Vcore

Ready SDA/MISO

C0

SCL/SCLK

C1

Alarm_High

cLite™

ZSSC3123

VSS

CC

LED CC

Alarm_High

Output Communication

Digital Core

VSS

GND

SS

High Alarm

VSS

cLite™

D CDC

(Optional)

VDD

Ready/PDM_C

I2C / SPI

SS Alarm_High Alarm_Low

Ordering Codes Sales Code

Description

Package

ZSSC3123AA1B

ZSSC3123 die — Temperature range: -40°C to +125°C

ZSSC3123AI1B

ZSSC3123 die — Temperature range: -40°C to +85°C

Tested dice on un-sawn wafer

ZSSC3123AA1C

ZSSC3123 die — Temperature range: -40°C to +125°C

Tested dice on frame

ZSSC3123AI1C

ZSSC3123 die — Temperature range: -40°C to +85°C

Tested dice on frame

ZSSC3123AA2

ZSSC3123 TSSOP14 — Temperature range: -40°C to +125°C – Lead-free package

Tube: add “T” to code; reel: add “R”

ZSSC3123AI2

ZSSC3123 TSSOP14 — Temperature range: -40°C to +85°C – Lead-free package

Tube: add “T” to code; reel: add “R”

ZSSC3123KIT

Kit ZSSC3123 SSC Evaluation Kit: Communication Board, SSC Board, Sensor Replacement Board, USB Cable, 5 IC Samples (software can be downloaded from www.zmdi.com/zssc3123)

Sales and Further Information Zentrum Mikroelektronik Dresden AG Global Headquarters Grenzstrasse 28 01109 Dresden, Germany Central Office: Phone +49.351.8822.0 Fax +49.351.8822.600

European Technical Support Phone +49.351.8822.7.772 Fax +49.351.8822.87.772 European Sales (Stuttgart) Phone +49.711.674517.55 Fax +49.711.674517.87955

Tested dice on un-sawn wafer

www.zmdi.com

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA USA Phone +855.275.9634 Phone +408.883.6310 Fax +408.883.6358

SSC@zmdi.com

Zentrum Mikroelektronik Dresden AG, Japan Office 2nd Floor, Shinbashi Tokyu Bldg.

4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan

ZMD FAR EAST, Ltd. 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

Phone Fax

Phone Fax

+81.3.6895.7410 +81.3.6895.7301

+886.2.2377.8189 +886.2.2377.8199

Zentrum Mikroelektronik Dresden AG, Korea Office U-space 1 Building 11th Floor, Unit JA-1102 670 Sampyeong-dong Bundang-gu, Seongnam-si Gyeonggi-do, 463-400 Korea Phone +82.31.950.7679 Fax +82.504.841.3026

DISCLAIMER: This information applies to a product under development. Its characteristics and specifications are subject to change without notice. Zentrum Mikroelektronik Dresden AG (ZMD AG) assumes no obligation regarding future manufacture unless otherwise agreed to in writing. The information furnished hereby is believed to be true and accurate. However, under no circumstances shall ZMD AG be liable to any customer, licensee, or any other third party for any special, indirect, incidental, or consequential damages of any kind or nature whatsoever arising out of or in any way related to the furnishing, performance, or use of this technical data. ZMD AG hereby expressly disclaims any liability of ZMD AG to any customer, licensee or any other third party, and any such customer, licensee and any other third party hereby waives any liability of ZMD AG for any damages in connection with or arising out of the furnishing, performance or use of this technical data, whether based on contract, warranty, tort (including negligence), strict liability, or otherwise.

Global Corporate Catalog

© 2013 Zentrum Mikroelektronik Dresden AG — Rev. 1.62 — December 11, 2013 All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.

35

Products available at ZMDI On-Line Store

Basic Application Overview

ZMDI‘s Sensor Signal Conditioners Resistive SSC Sensitivity > 20mV/V Sensor Measurand

> 10mV/V

Typical Resistive Sensor Type

>5mV/V > 2mV/V Analog Output Digital Output Analog Output Digital Output Analog Output Digital Output Analog Output

Pressure Temperature Flow Level

Ceramic Thick Film Bridge Metal Thin-Film Bridge Strain Gauge Bridge

Position

Magneto-resistive

Altitude

Resistive Bridge

Sensor Measurand

ZSC31050 ZSSC3138 ZSC31150 ZSSC3154

ZSC31050 ZSSC3170

ZSSC3138

ZSC31014

ZSC31015 ZSSC3015 ZSSC3131 ZSSC3135 ZSSC3136

ZSSC3016 ZSSC3026 ZSSC3036 ZSSC3027

ZSC31010

ZSSC3016 ZSSC3026 ZSSC3036 ZSSC3027

Maximum Input Capacitance

Typical Sensor Type

2 - 10pF

NOTE: PINK FONT INDICATES AUTOMOTIVE QUALIFIED PRODUCTS

2-260pF

Analog Output Digital Output Analog Output Digital Output

Humidity

Supply Voltage Range Resistive SSC

Capacitive

Supply Voltage Range Automotive Resistive SSC

ZSSC3122

ZSSC3122

ZSSC3015: 2.7 to 5.5 V *

ZSSC3122: 1.8 to 5.5 V

ZSSC3016: 1.8 to 3.6 V

ZSC31150: 4.5 to 5.5 V

ZSSC3123: 2.3 to 5.5 V

ZSSC3131: 4.5 to 5.5 V

ZSSC3036: 1.8 to 3.6 V

ZSSC3135: 4.5 to 5.5 V

ZSC31010: 2.7 to 5.5 V *

ZSSC3136: 4.5 to 5.5 V

ZSC31014: 2.7 to 5.5 V

ZSSC3138: 4.5 to 5.5 V

ZSC31015: 2.7 to 5.5 V *

ZSSC3154: 4.5 to 5.5 V

ZSC31050: 2.7 to 5.5 V **

ZSSC3170: 7 to 18 V

ZSSC3123

Supply Voltage Range Capacitive SSC

ZSSC3027: 1.7 to 3.6 V ZSSC3026: 1.8 to 3.6 V

ZSSC3123

* 5.5 to 30 V with external JFET ** 5 to 40 V with external JFET

The modular Sensor Signal Conditioner (SSC) Evaluation Kits are designed to provide an overview of the functions and configuration options for ZMDI’s SSC IC Family. These kits provide support for newcomers and experienced users. To evaluate different SSCs with a ZMDI modular kit, simply interchange the IC-specific SSC Evaluation Boards and software designed specifically for the SSCs. Each SSC Evaluation Board is simple to connect and operate. ICs under test are installed in a common ZIF-socket for easy interchange.

On-board LEDs display the status of the power supply and, if applicable, the status of digital outputs (e.g., alarm signals for the ZSC31050). Several connectors allow access to all I/O signal lines for the SSC for simple system verification. Screw terminals can be used to connect actual sensor elements. Initial evaluation of the SSC can be done with a Sensor Replacement Board.

Visit www.zmdi.com for more detailed information

36

Battery Management Adaptive and Efficient

Battery Management from ZMDI Our Award-Winning Solutions Enable Energy-Efficient Usage

Energy-Efficiency with the Help of Battery Monitoring ICs Due to the urgent global need to reduce environmental pollution and to meet governmental regulations limiting maximum harmful emission from vehicles, automotive companies are increasing their efforts to introduce features aimed towards reducing fuel consumption.

One of these highly effective fuel saving features is the start-stop-system, which automatically shuts down and restarts the engine as needed to reduce the amount of time the engine spends idling, thereby reducing fuel consumption and emissions by as much as 5 to10 percent. In order to ensure a safe re-start of the engine once it has been turned off, precise information on the charge condition of the starter battery is essential.

ZMDI’s battery monitoring ICs accurately determine the charge condition of the battery based on inputs including charge and discharge currents, battery voltage, temperature, and aging.

Both voltage and current are measured with two highly linear, synchronous 24-bit analog-to-digital converters.

Measuring charge and discharge currents is particularly challenging as the battery monitoring IC must be capable of precisely measuring milliampere currents when the engine is turned off and up to more than one thousand amperes when the engine i s started. ZMDI’s battery monitoring ICs can achieve this requirement by means of a shunt-resistor-based current measurement technique combined with a highly dynamic embedded programmable gain amplifier.

Battery Monitoring ICs with Internal and External Microcontrollers ZMDI offers two lines of products of battery monitoring ICs: one for external microcontrollers and a more advanced line with an integrated internal, 32-bit ARM© Cortex™ based microcontroller.

Our leading-edge ICs with an internal microcontroller are preferred for small form-factor, standalone intelligent battery monitoring systems.

Our battery monitoring ICs for use with external microcontrollers are preferred for solutions that are embedded in systems that already contain a microcontroller or where one master controller controls several battery monitoring slaves, such as in multi-battery applications or systems requiring additional safety via redundant measurement of battery current.

ZMDI’s ICs with an internal microcontroller offer effective IP safeguarding for customer software by employing copy protection for the user’s firmware on the chip.

Applications for ZMDI Battery Management ICs • Lead acid battery monitoring • Battery monitoring for energy storage; e.g., in photovoltaic installations • Intelligent sensors and sensor interfaces • Electric energy measurement and monitoring

Another challenging requirement is for ultra-low power consumption in standby mode, for example when a vehicle is parked. The battery monitoring IC must continue to monitor the battery’s state even when the engine is turned off. In this standby mode, our battery monitoring ICs typically consume only 55 to 60 μA.

Visit www.zmdi.com for more detailed information

38

Battery Management by ZMDI – Award Winning Products The ever-increasing global demand for energy underscores the need for products that have a real impact in helping to conserve energy and therefore reduce CO2 emissions. We at ZMDI believe that energy-efficiency begins at the chip level, and we are proud of being leaders in this area.

Our product designers develop semiconductor products that are used by our customers to design innovative energy-efficient systems.

ZMDI’s award

Our efforts have received worldwide recognition.

The jury for the 2013 Green Apple Awards chose ZMDI for its award for “Battery Monitoring ICs for Start-Stop Features in Vehicles.”

monitoring ICs

We were selected as a finalist in the EE Times and EDN Annual Creativity in Electronics (ACE) Awards 2014 for the category ”Energy Technology Award“ for our Intelligent Battery Monitoring Solution.

Frost & Sullivan recognized ZMDI with the 2012 Europe Frost & Sullivan New Product Innovation Award for its battery monitoring device.

winning battery offer high precision, high resolution, ultra-low power consumption, and the smallest package footprint

Key Features • Wide operating temperature: -40°C to +125°C • Two high precision 24-bit ADCs, up to 16kHz sampling rate • External or internal, factory-calibrated temperature sensor

of its kind on the market

• Small PQFN packages: 5x5mm or 6x6mm • 32-bit ARM® Cortex™-M0* microcontroller * ARM® is a trademark of ARM, Ltd.

Global Corporate Catalog

39

Products available at ZMDI On-Line Store

ZSSC1856

Intelligent Battery Sensor IC

ZSSC1856

Intelligent Battery Sensor IC

Brief Description The ZSSC1856 is a dual-channel ADC with an embedded microcontroller for battery sensing/management in automotive, industrial, and medical systems.

One of the two input channels measures the battery current IBAT via the voltage drop at the external shunt resistor. The second channel measures the battery voltage VBAT and the temperature. An integrated flash memory is provided for customer-specific software; e.g., dedicated algorithms for calculating the battery state.

During Sleep Mode (e.g., engine off), the system makes periodic measurements to monitor the discharge of the battery. Measurement cycles are controlled by the software and include various wakeup conditions. The ZSSC1856 is optimized for ultralow power consumption and draws only 100µA or less in this mode.

•

•

•

• • • • • • •

High-precision 18-bit sigma-delta ADC with on-chip voltage reference (5ppm/K) Current channel  IBAT offset error: ≤ 10mA  IBAT resolution: ≤ 1mA  Programmable gain: 4 to 512  Sampling rate: 1Hz to 16kHz Voltage channel  Input range: 4 to 28.8V  Voltage accuracy: ± 2mV Temperature channel  Internal temperature sensor: ± 2°C  External temperature sensor (NTC) On-chip precision oscillator (1%) On-chip low-power oscillator ® ARM Cortex™-M0* microcontroller: 32-bit core, 10MHz to 20MHz 96kB Flash/EE Memory with ECC, 8kB SRAM LIN2.1 / SAE J2602-1 Transceiver Directly connected to 12V battery supply Current consumption  Normal Mode: 10mA to 20mA  Low-Power Mode: ≤ 100µA ®

Precision measurement solution for accurate prediction of battery state of health (SOH), state of charge (SOC) or state of function (SOF) Flexible wake-up modes allow minimum power consumption without sacrificing performance No temperature calibration or external trimming components required Optimized code density through small instruction ® set architecture Thumb -2 * Robust POR concept for harsh automotive environments Industry’s smallest footprint allows minimal module size and cost AEC-Q100 qualified solution

•

• • •

Features •

Benefits

®

* The ARM , Cortex™, and Thumb -2 trademarks are owned by ARM, Ltd. 2 The I C™ trademark is owned by NXP.

• • •

Available Support Evaluation Kit & Application Notes

•

Physical Characteristics Wide operation temperature: -40°C to +125°C Supply voltage: 3.5 to 18 V Small footprint package: PQFN32 5x5 mm

• • •

Basic ZSSC1856 Application Circuit

-

To Harness

+

Car Chassis Ground

VBAT VDDE

Host Controller LIN Interface

LIN

INP INN Rshunt

+

-

Battery

VDDA

NTH f

VSSA

ZSSC1856 GPIO

5

Optional GPIO: SPI, I²C™, UART

VSSE

NTC

© 2012 Zentrum Mikroelektronik Dresden AG — Rev. 1.00 All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.

The information furnished in this publication is subject to changes without notice.

Visit www.zmdi.com for more detailed information

40

ZSSC1856

Intelligent Battery Sensor IC

CAR BODY

UBAT

ZSSC1856 Block Diagram

ZSSC1856 Stacked Die

Analog Block

LP_REG

VDDP_REG

BG_REF

WD_TIMER

VDDA_REG

VDDC_REG

OSC

GP_TIMER

SD_ADC

DIGITAL FILTER

CONFIG REGISTER

RESULT REGISTER

SD_ADC

DIGITAL FILTER

CALIBRATION DATA PATH

SPI

SHUNT

PGA

Digital Block

RREF

+ – BATTERY

MUX NTC

GPIO: SPI, I C™, UART 2

LIN

LIN_PHYS

LIN UART

SBC

RAM

FLASH

GPIO: SPI, I2C™, UART

µC

Microcontroller

Applications • Intelligent battery sensing

for automotive applications; e.g., start/stop systems, e-bikes, scooters, and e-carts

• Industrial and medical applica-

tions requiring precise battery SOC, SOH and SOF monitoring; e.g., emergency lighting, uninterruptable power supplies, hospital equipment, alarm systems, and more

Ordering Information Product Sales Code

Description

Package

ZSSC1856CA6R

ZSSC1856 battery sensing IC – temperature range -40°C to +125°C

PQFN32 5x5 mm (reel)

ZSSC1856KIT V1.0

Modular evaluation and development board for Kit boards, IC samples, USB cable, ZSSC1856 DVD with software and documentation

Sales and Further Information

www.zmdi.com

Zentrum Mikroelektronik Dresden AG Grenzstrasse 28 01109 Dresden Germany

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA

Zentrum Mikroelektronik Dresden AG, Japan Office 2nd Floor, Shinbashi Tokyu Bldg.

4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan

Phone +49.351.8822.427 Fax +49.351.8822.8427

Phone +855-ASK-ZMDI (+855.275.9634)

Phone +81.3.6895.7410 Fax +81.3.6895.7301

ZMD FAR EAST, Ltd. 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

sales@zmdi.com Zentrum Mikroelektronik Dresden AG, Korean Office POSCO Centre Building West Tower, 11th Floor 892 Daechi, 4-Dong, Kangnam-Gu Seoul, 135-777 Korea

Global Corporate Catalog Phone +886.2.2377.8189 Fax +886.2.2377.8199

Phone +82.2.559.0660 Fax +82.2.559.0700

Products available at ZMDI On-Line Store

DISCLAIMER: This information applies to a product under development. Its characteristics and specifications are subject to change without notice. Zentrum Mikroelektronik Dresden AG

41 (ZMD AG) assumes no obligation regarding future manufacture unless otherwise agreed to in writing. The information furnished hereby is believed to be true and accurate. However, under

no circumstances shall ZMD AG be liable to any customer, licensee, or any other third party for any special, indirect, incidental, or consequential damages of any kind or nature whatsoever arising out of or in any way related to the furnishing, performance, or use of this technical data. ZMD AG hereby expressly disclaims any liability of ZMD AG to any customer, licensee or any other third party, and any such customer, licensee and any other third party hereby waives any liability of ZMD AG for any damages in connection with or arising out of the furnishing,

Mobile Sensing Smart and Mobile

Mobile Sensing from ZMDI Interface Solutions for Mobile And Wearable Sensors

Mobile Sensing ICs from ZMDI Industry leaders are predicting double-digit growth for the global market for mobile sensors, which is expected to expand to over 22 billion dollars by 2018. ZMDI’s next generation sensing technology can shorten critical time-to-market essential to meeting the increasing demands for smaller mobile products with more sophisticated features.

Given ZMDI’s focus on designing best-in-class energy efficient solutions that reduce the demand for energy consumption, it is clear why market leaders build long-term relationships with ZMDI. With new solutions rapidly emerging in the market for mobile sensing systems and higher levels of integration driving new development, ZMDI is well placed to offer solutions that advance opportunities in this high-growth market. With highly integrated products providing advanced signal conditioning and sensing capabilities, ZMDI is positioned to be a true partner to tier-one suppliers, emerging market suppliers, MEMS suppliers, and reference design houses. For example, our recently released ZOPT3100 includes an ambient light sensor (ALS), a color sensor (CS), a proximity sensor (PS), and an integrated IR LED driver on a single chip.

• High accuracy and resolution for precise sensor signal conditioning • Best-in-class power consumption, accuracy, and resolution • Small package size and flexible delivery forms • Minimal number of external components • Single-pass calibration

Applications for ZMDI Mobile Sensor ICs Altimeter/barometric Proximity sensing Ambient light/color sensing Temperature sensing Vital parameter sensing Humidity sensing

Conditioner ICs are highly integrated energy-efficient products that are easy to use as they are supported

Key Features for ZMDI Mobile Sensor ICs

• • • • • •

ZMDI Sensor Signal

by sophisticated evaluation software and experienced technical staff

Global Corporate Catalog

43

Products available at ZMDI On-Line Store

ZSSC3016

Low Power 16 Bit Sensor Signal Conditioner IC

ZSSC3016

Low Power 16-Bit Sensor Signal Conditioner IC





The ZSSC3016 is a sensor signal conditioner (SSC) integrated circuit for highaccuracy ampli fication and analogtodigital conversion of a differ ential input signal. Designed for high resolution altimeter module applications, the ZSSC3016 can st nd order perform offset, span, and 1 and 2 temperature compensation of the measured signal.

Developed for correction of resistive bridge sensors, it can also provide a corrected temperature output measured with an internal sensor.



The measured and corrected bridge values are provided at the digital output pins, which can be 2 configured as I C* (≤ 3.4MHz) or SPI (≤ 20MHz).

Digital compensation of signal offset, sensitivity, temperature, and nonlinearity is accomplished via an 18bit internal digital signal processor (DSP) running a correction algorithm. Calibration coeffici ents are stored onchip in a highly reliable, non volatile, multipletime programmable (MTP) mem ory. Programming the ZSSC3016 is simple via the serial interface and the PCcontrolled calibration software provided in the ZMDI Development Kit. The interface is used for the PCcontrolled cali bration procedure, which programs the set of cali bration coefficients in memory. The digital mating is fast and precise, eliminating the overhead normally associated with trimming external com ponents and multipass calibration routines.

 

  

   



*

Flexible, programmable analog frontend design; up to 16bit scalable, chargebalancing twosegment analogtodigital converter (ADC) Fully programmable gain amplifier accepting sensors from 14 to 72 (linear factor) Internal autocompensated temperature sensor Digital compensation of individual sensor offset; st nd 1 and 2 order digital compensation of sensor gain st nd Digital compensation of 1 and 2 order tem perature gain and offset drift Intelligent power management unit Layout customized for diedie bonding with sensor for highdensity chiponboard assembly Typical sensor elements can achieve accuracy of less than ±0.10% FSO @ 40 to 85 °C

    

Integrated 18bit calibration math DSP Fully corrected signal at digital output Minimize calibration costs through the onepass calibration concept No external trimming components required Highly integrated CMOS design Excellent for lowvoltage and lowpower battery applications

       

Supply voltage range: 1.8 to 3.6V Current consumption: 1mA (operating mode) Sleep State current <250nA (25°C) Temperature resolution: <0.003K/LSB Operation temperature: –40°C to +85 °C Small die size: 1.5mm² Delivery options: die for wafer bonding

 The ZSSC3016 is designed for operation in calibrated resistive (pressure) sensor modules:      

Barometric altitude measurement for portable navigation Altitude measurement for emergency call systems Altitude measurement for car navigation Inside hard disk pressure measurement Weather forecast Fan control



* I2C is a registered trademark of NXP.

I2C is a registered trademark of NXP.

Visit www.zmdi.com for more detailed information

 All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.

The information furnished in this publication is and subject to changes without notice.

44

ZSSC3016

Low Power 16 Bit Sensor Signal Conditioner IC



 





ZSSC3016CC1B

Temperature range: –40°C to +85 °C, ConsumerLevel: Parameter according Data Sheet

Wafer (304um) unsawn

ZSSC3016CI1B

Temperature range: –40°C to +85 °C, IndustrialLevel: 10 years MTPData Retention; 20FIT

Wafer (304um) unsawn

ZSSC3016CI1D ES

Engineering Samples, Temperature range: –40°C to +85 °C

Dice in Waffle Pack

ZSSC3016KIT

ZSSC3016 Evaluation Kit, including sample, modular evaluation board, and evaluation software.

Kit

* Please contact ZMDI Sales for additional options.





 



Grenzstrasse 28 01109 Dresden Germany

8413 Excelsior Drive Suite 200 Madison, WI 53717 USA

Phone Fax

Phone Fax

+49 (0)351.8822.7.772 +49 (0)351.8822.87.772

+1 (608) 8291987 +1 (631) 5492882



 



Phone Fax

Phone Fax

2nd Floor, Shinbashi Tokyu Bldg.

4213, Shinbashi, Minatoku Tokyo, 1050004 Japan +81.3.6895.7410 +81.3.6895.7301

3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

+886.2.2377.8189 +886.2.2377.8199

DISCLAIMER: This information applies to a product under development. Its characteristics and specifications are and subject to change without notice. Zentrum Mikroelektronik Dresden AG (ZMD AG) assumes no obligation regarding future manufacture unless otherwise agreed to in writing. The information furnished hereby is believed to be true and accurate. However, under no circumstances shall ZMD AG be liable to any customer, licensee, or any other third party for any special, indirect, incidental, or consequential damages of any kind or nature whatsoever arising out of or in any way related to the furnishing, performance, or use of this technical data. ZMD AG hereby expressly disclaims any liability of ZMD AG to any customer, licensee or any other third party, and any such customer, licensee and any other third party hereby waives any liability of ZMD AG for any damages in connection with or arising out of the furnishing, performance or use of this technical data, whether based on contract, warranty, tort (including negligence), strict liability, or otherwise

Global Corporate Catalog

45

Products available at ZMDI On-Line Store

 All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.

The information furnished in this publication is and subject to changes without notice.

ZSSC3026

Low Power 16 Bit Sensor Signal Conditioner IC

ZSSC3026

Low Power 16-Bit Sensor Signal Conditioner IC





The ZSSC3026 is a sensor signal conditioner (SSC) integrated circuit for highaccuracy ampli fication and analogtodigital conversion of a differ ential input signal. Designed for high resolution altimeter module applications, the ZSSC3026 can st nd order perform offset, span, and 1 and 2 temperature compensation of the measured signal.

Developed for correction of resistive bridge sensors, it can also provide a corrected temperature output measured with an internal sensor.



The measured and corrected bridge values are provided at the digital output pins, which can be 2 configured as I C* (≤ 3.4MHz) or SPI (≤ 20MHz).

Digital compensation of signal offset, sensitivity, temperature, and nonlinearity is accomplished via an 18bit internal digital signal processor (DSP) running a correction algorithm. Calibration coeffici ents are stored onchip in a highly reliable, non volatile, multipletime programmable (MTP) mem ory. Programming the ZSSC3026 is simple via the serial interface. The ICinternal charge pump provides the MTP programming voltage. The interface is used for the PCcontrolled calibration procedure, which programs the set of calibration coefficients in memory. The digital mating is fast and precise, eliminating the overhead normally associated with trimming external components and multipass calibration routines.

 

  

   



*

Flexible, programmable analog frontend design; up to 16bit scalable, chargebalancing twosegment analogtodigital converter (ADC) Fully programmable gain amplifier accepting sensors from 14 to 72 (linear factor) Internal autocompensated temperature sensor Digital compensation of individual sensor offset; st nd 1 and 2 order digital compensation of sensor gain st nd Digital compensation of 1 and 2 order tem perature gain and offset drift Intelligent power management unit Layout customized for diedie bonding with sensor for highdensity chiponboard assembly Typical sensor elements can achieve accuracy of less than ±0.10% FSO @ 40 to 110°C * I2C is2 a registered trademark of NXP. I C is a registered trademark of NXP.

Visit www.zmdi.com for more detailed information

    

Integrated 18bit calibration math DSP Fully corrected signal at digital output Minimize calibration costs through the onepass calibration concept No external trimming components required Highly integrated CMOS design Excellent for lowvoltage and lowpower battery applications

       

Supply voltage range: 1.8 to 3.6V Current consumption: 1mA (operating mode) Sleep State current: 50nA (typical) Temperature resolution: <0.003K/LSB Operation temperatures: –40°C to +85°C –40°C to +110°C Small die size: 1.5mm² Delivery options: die for wafer bonding, bumped die for Flip Chip, PQFN24

 The ZSSC3026 is designed for operation in calibrated resistive (pressure) sensor modules:     



Barometric altitude measurement for portable navigation Altitude measurement for emergency call systems Altitude measurement for car navigation Inside hard disk pressure measurement Weather forecast

Fan control



 All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.

The information furnished in this publication is and subject to changes without notice.

46

ZSSC3026

Low Power 16 Bit Sensor Signal Conditioner IC



 





ZSSC3026CC1B

Temperature range: –40°C to +85 °C, ConsumerLevel: Parameter according Data Sheet

Chips, Wafer (304um) unsawn, tested

ZSSC3026CI1B

Temperature range: –40°C to +85 °C, IndustrialLevel: 10 years MTPData Retention

Chips, Wafer (304um) unsawn, tested

ZSSC3026CI4

Temperature range: –40°C to +110 °C, Industrial

PQFN24 4x4, tested

ZSSC30x6KIT

Evaluation Kit for ZSSC30x6 Product Family

Boards, cable, softwareCD, 1 sample

* Please contact ZMDI Sales for additional options.







 



 



Grenzstrasse 28 01109 Dresden Germany

8413 Excelsior Drive Suite 200 Madison, WI 53717 USA

Phone Fax

Phone Fax

Phone Fax

Phone Fax

+49 (0)351.8822.7.772 +49 (0)351.8822.87.772

+1 (608) 8291987 +1 (631) 5492882

2nd Floor, Shinbashi Tokyu Bldg.

4213, Shinbashi, Minatoku Tokyo, 1050004 Japan +81.3.6895.7410 +81.3.6895.7301

3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

+886.2.2377.8189 +886.2.2377.8199

DISCLAIMER: This information applies to a product under development. Its characteristics and specifications are and subject to change without notice. Zentrum Mikroelektronik Dresden AG (ZMD AG) assumes no obligation regarding future manufacture unless otherwise agreed to in writing. The information furnished hereby is believed to be true and accurate. However, under no circumstances shall ZMD AG be liable to any customer, licensee, or any other third party for any special, indirect, incidental, or consequential damages of any kind or nature whatsoever arising out of or in any way related to the furnishing, performance, or use of this technical data. ZMD AG hereby expressly disclaims any liability of ZMD AG to any customer, licensee or any other third party, and any such customer, licensee and any other third party hereby waives any liability of ZMD AG for any damages in connection with or arising out of the furnishing, performance or use of this technical data, whether based on contract, warranty, tort (including negligence), strict liability, or otherwise

Global Corporate Catalog

47

Products available at ZMDI On-Line Store

ZSSC3027

Low-Power 16-Bit Sensor Signal Conditioner IC

ZSSC3027

Low Power 16-Bit Sensor Signal Conditioner IC

Brief Description

Benefits

The ZSSC3027 is a sensor signal conditioner (SSC) integrated circuit for high-accuracy amplification and analog-to-digital conversion of a differential input signal. Designed for high-resolution altimeter module applications, the ZSSC3027 can perform offset, st nd span, and 1 and 2 order temperature compensation of the measured signal. Developed for correction of resistive bridge sensors, it can also provide a corrected temperature output measured with an internal sensor.

The measured and corrected bridge values are provided at the digital output pins, which can be 2 configured as I C™* (≤ 3.4MHz) or SPI (≤ 20MHz).

Digital compensation of signal offset, sensitivity, temperature, and non-linearity is accomplished via an 18-bit internal digital signal processor (DSP) running a correction algorithm. Calibration coefficients are stored on-chip in a highly reliable, non-volatile, multiple-time programmable (MTP) memory. Programming the ZSSC3027 is simple via the serial interface. The IC-internal charge pump provides the MTP programming voltage. The interface is used for the PC-controlled calibration procedure, which programs the set of calibration coefficients in memory.

The ZSSC3027 provides accelerated signal processing in order to support high-speed control, safety, and real-time sensing applications. It complements ZMDI’s ZSSC30x6 products.

  

 

     

Integrated 18-bit calibration math DSP Fully corrected signal at digital output One-pass calibration minimizes calibration costs No external trimming, filter, or buffering components required Highly integrated CMOS design Excellent for low-voltage and low-power battery applications Optimized for operation in calibrated resistive sensor modules

Physical Characteristics       

Supply voltage range: 1.7 to 3.6V Operating mode current consumption: 930mA (typical) Sleep State current: 20nA (typical) Temperature resolution: <0.003K/LSB Operation temperatures: –40°C to +85°C Small die size: 1.5mm² Delivery options: die for wafer bonding

Available Support  

ZSSC3026 Evaluation Kit can be used to evaluate ZSSC3027 capabilities Support Documentation

ZSSC3027 Application Example

Features 



Flexible, programmable analog front-end design; up to 16-bit scalable, charge-balancing twosegment analog-to-digital converter (ADC) Fully programmable gain amplifier accepting sensors from 14 to 72 (linear factor) Internal auto-compensated temperature sensor Digital compensation of individual sensor offset; st nd 1 and 2 order digital compensation of sensor st nd gain as well as of 1 and 2 order temperature gain and offset drift Layout optimized for stacked-die bonding for high-density chip-on-board assembly Typical sensor elements can achieve accuracy of better than ±0.10% FSO** @ -40 to 85°C

* I2C™ is a trademark of NXP. ** FSO = Full Scale Output.

For more information, contact ZMDI via mobile.sensing@zmdi.com.

Visit www.zmdi.com for more detailed information

© 2013 Zentrum Mikroelektronik Dresden AG — Rev. 1.00 — December 10, 2013. All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. The information furnished in this publication is subject to changes without notice.

48

ZSSC3027

Low-Power 16-Bit Sensor Signal Conditioner IC

ZSSC3027 Block Diagram

VDDB

Vreg int VTP VTN

Temperature Reference Sensor

AGND / CM Generator

Bias Current Generator

Power Ctr.

VDD

Voltage Regulator

VSS

INP

Sensor Bridge

INN

Multiplexer

ZSSC3027 A PreAmplifier

D 16 Bit

18-bit DSP Core (Calculations, Communication)

VSSB

Power-ON Reset

Applications  Barometric altitude measurement for portable navigation or emergency call systems  Altitude measurement for car navigation  Inside hard disk pressure measurement  Weather forecast  Fan control  Industrial, pneumatic, and liquid pressure  High-resolution temperature measurements

Clock Generator

Ring Oscillator

System Control Unit

MTP ROM

SPI I²CTM

EOC

SCLK/SCL SS MOSI/SDA MISO SEL

Ordering Information (See section 6 in the data sheet for additional options for delivery) Sales Code

Description

Delivery Package

ZSSC3027AC1B

Die—temperature range: –40°C to +85 °C

Wafer (304µm) unsawn, tested

ZSSC3027AC6B

Die—temperature range: –40°C to +85 °C

Wafer (725µm) unsawn, tested

ZSSC3027AC7C

Die—temperature range: –40°C to +85°C

Wafer (200µm) unsawn, tested

ZSSC3027AI1D

Engineering samples, die—temperature range: –40°C to +85°C

Dice in waffle pack (304µm)

ZSSC3026-KIT

Evaluation Kit for ZSSC3026, including boards, cable, software, and 1 ZSSC3026 PQFN24 sample (equivalent to ZSSC3027—kit is recommended for evaluation of the capabilities of the ZSSC3027)

Sales and Further Information

www.zmdi.com

mobile.sensing@zmdi.com

Zentrum Mikroelektronik Dresden AG Global Headquarters Grenzstrasse 28 01109 Dresden, Germany

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA

Central Office: Phone +49.351.8822.0 Fax +49.351.8822.600

USA Phone +855.275.9634 Phone +408.883.6310 Fax +408.883.6358

European Technical Support Phone +49.351.8822.7.772 Fax +49.351.8822.87.772

DISCLAIMER: This information applies to a product under development. Its characteristics and specifications are subject to change without notice.

Zentrum Mikroelektronik Dresden AG (ZMD AG) assumes no obligation regarding future manufacture unless otherwise agreed to in writing. The information furnished hereby is believed to be true and accurate. However, under no circumstances shall ZMD AG be liable to any customer, licensee, or any other third party for any special, indirect, incidental, or consequential damages of any kind or nature whatsoever arising out of or in any way related to the furnishing, performance, or use of this technical data. ZMD AG hereby expressly disclaims any liability of ZMD AG to any customer, licensee or any other third party, and any such customer, licensee and any other third party hereby waives any liability of ZMD AG for any damages in connection with or arising out of the furnishing, performance or use of this technical data, whether based on contract, warranty, tort (including negligence), strict liability, or otherwise.

European Sales (Stuttgart) Phone +49.711.674517.55 Fax +49.711.674517.87955

Zentrum Mikroelektronik Dresden AG, Japan Office 2nd Floor, Shinbashi Tokyu Bldg.

4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan

ZMD FAR EAST, Ltd. 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

Phone +81.3.6895.7410 Fax +81.3.6895.7301

Phone +886.2.2377.8189 Fax +886.2.2377.8199

Zentrum Mikroelektronik Dresden AG, Korea Office U-space 1 Building 11th Floor, Unit JA-1102 670 Sampyeong-dong Bundang-gu, Seongnam-si Gyeonggi-do, 463-400 Korea Phone +82.31.950.7679 Fax +82.504.841.3026

© 2013 Zentrum Mikroelektronik Dresden AG — Rev. 1.00—December 10, 2013. All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.

Global Corporate Catalog

49

Products available at ZMDI On-Line Store

ZSSC3036

Low-Power 16-Bit Sensor Signal Conditioner IC

ZSSC3036

Low Power 16-Bit Sensor Signal Conditioner IC

Brief Description

Benefits

The ZSSC3036 is a sensor signal conditioner (SSC) integrated circuit for high-accuracy amplification and analog-to-digital conversion of a differential input signal. Designed for high-resolution altimeter module applications, the ZSSC3036 can perform offset, st nd span, and 1 and 2 order temperature compensation of the measured signal. Developed for correction of resistive bridge sensors, it can also provide a corrected temperature output measured with an internal sensor.

The measured and corrected bridge values are provided at the digital output pins, which can be 2 configured as I C™* (≤ 3.4MHz) or SPI (≤ 20MHz).

Digital compensation of signal offset, sensitivity, temperature, and non-linearity is accomplished via an 18-bit internal digital signal processor (DSP) running a correction algorithm. Calibration coefficients are stored on-chip in a highly reliable, non-volatile, multiple-time programmable (MTP) memory. Programming the ZSSC3036 is simple via the serial interface. The IC-internal charge pump provides the MTP programming voltage. The interface is used for the PC-controlled calibration procedure, which programs the set of calibration coefficients in memory.

The ZSSC3036 provides accelerated signal processing in order to support high-speed control, safety, and real-time sensing applications. It complements ZMDI’s additional ZSSC30x6 products.

Features 

  

 

       

Integrated 18-bit calibration math DSP Fully corrected signal at digital output Layout customized for die-die bonding with sensor for high-density chip-on-board assembly One-pass calibration minimizes calibration costs No external trimming, filter, or buffering components required Highly integrated CMOS design Excellent for low-voltage and low-power battery applications Optimized for operation in calibrated resistive sensor modules

Physical Characteristics       

Supply voltage range: 1.8 to 3.6V Current consumption: 1mA (operating mode) Sleep State current: 50nA (typical) Temperature resolution: <0.003K/LSB Operation temperatures: –40°C to +85°C –40°C to +110°C Small die size: 1.5mm² Delivery options: die for wafer bonding

* I2C™ is a trademark of NXP. ** FSO = Full Scale Output.

ZSSC3036 Application Example

Flexible, programmable analog front-end design; up to 16-bit scalable, charge-balancing twosegment analog-to-digital converter (ADC) Fully programmable gain amplifier accepting sensors from 14 to 72 (linear factor) Internal auto-compensated temperature sensor Digital compensation of individual sensor offset; st nd 1 and 2 order digital compensation of sensor st nd gain as well as of 1 and 2 order temperature gain and offset drift Fast sensing: 16-bit conditioned sensor signal -1 measurement rate at more than 200s Typical sensor elements can achieve accuracy of less than ±0.10% FSO** @ -40 to 110°C

Visit www.zmdi.com for more detailed information

For more information, contact ZMDI via mobile.sensing@zmdi.com.

© 2013 Zentrum Mikroelektronik Dresden AG — Rev. 1.20 — May 28, 2013. All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. The information furnished in this publication is subject to changes without notice.

50

ZSSC3036

Low-Power 16-Bit Sensor Signal Conditioner IC

ZSSC3036 Block Diagram

VDDB

Vreg int VTP VTN

Temperature Reference Sensor

AGND / CM Generator

Bias Current Generator

Power Ctr.

VDD

Voltage Regulator

VSS

Sensor Bridge

INP INN

Multiplexer

ZSSC3036 A PreAmplifier

18-bit DSP Core (Calculations, Communication)

D 16 Bit

VSSB

Power-ON Reset

Clock Generator

Applications  Barometric altitude measurement for portable navigation or emergency call systems  Altitude measurement for car navigation  Inside hard disk pressure measurement  Weather forecast  Fan control  Industrial, pneumatic, and liquid pressure  High-resolution temperature measurements

Ring Oscillator

MTP ROM

System Control Unit

SPI I²CTM

EOC

SCLK/SCL SS MOSI/SDA MISO SEL

Ordering Information (See section 6 in the data sheet for additional options for delivery package and wafer thickness of 725µm.)

Sales Code

Description

Delivery Package

ZSSC3036CC1B

Die—temperature range: –40°C to +85 °C

Wafer (304µm) unsawn, tested

ZSSC3036CI1B

Die—temperature range: –40°C to +85 °C, extended qualification

Wafer (304µm) unsawn, tested

ZSSC3036CC1C

Die—temperature range: –40°C to +85°C

Dice on frame (304µm), tested

ZSSC3036CI1BH

Die—temperature range: –40°C to +110 °C, extended qualification

Wafer (304µm) unsawn, tested

ZSSC3036CI1CH

Die—temperature range: –40°C to +110 °C, extended qualification

Dice on frame (304µm), tested

ZSSC30x6-KIT

Evaluation Kit for ZSSC30x6 Product Family, including boards, cable, software, and 1 sample

Sales and Further Information

www.zmdi.com

mobile.sensing@zmdi.com

Zentrum Mikroelektronik Dresden AG Global Headquarters Grenzstrasse 28 01109 Dresden, Germany

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA

Central Office: Phone +49.351.8822.0 Fax +49.351.8822.600

USA Phone +855.275.9634 Phone +408.883.6310 Fax +408.883.6358

European Technical Support Phone +49.351.8822.7.772 Fax +49.351.8822.87.772

DISCLAIMER: This information applies to a product under development. Its characteristics and specifications are subject to change without notice.

Zentrum Mikroelektronik Dresden AG (ZMD AG) assumes no obligation regarding future manufacture unless otherwise agreed to in writing. The information furnished hereby is believed to be true and accurate. However, under no circumstances shall ZMD AG be liable to a ny customer, licensee, or any other third party for any special, indirect, incidental, or consequential damages of any kind or nature whatsoever arising out of or in any way related to the furnishing, performance, or use of this technical data. ZMD AG hereby expressly disclaims any liability of ZMD AG to any customer, licensee or any other third party, and any such customer, licensee and any other third party hereby waives any liability of ZMD AG for any damages in connection with or arising out of the furnishing, performance or use of this technical data, whether based on contract, warranty, tort (including negligence), strict liability, or otherwise.

European Sales (Stuttgart) Phone +49.711.674517.55 Fax +49.711.674517.87955

Zentrum Mikroelektronik Dresden AG, Japan Office 2nd Floor, Shinbashi Tokyu Bldg.

4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan

ZMD FAR EAST, Ltd. 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

Phone +81.3.6895.7410 Fax +81.3.6895.7301

Phone +886.2.2377.8189 Fax +886.2.2377.8199

Zentrum Mikroelektronik Dresden AG, Korea Office U-space 1 Building 11th Floor, Unit JA-1102 670 Sampyeong-dong Bundang-gu, Seongnam-si Gyeonggi-do, 463-400 Korea Phone +82.31.950.7679 Fax +82.504.841.3026

Global Corporate Catalog

© 2013 Zentrum Mikroelektronik Dresden AG — Rev. 1.20— May 28, 2013. All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.

51

Products available at ZMDI On-Line Store

ZOPT3100

Digital RGB/Ambient Light + Proximity Sensor IC

ZOPT3100

Digital RGB/Ambient Light + Proximity Sensor IC

Brief Description

ALS Features

The ZOPT3100 Sensor IC integrates an ambient light sensor (ALS), a color sensor (CS), and a proximity sensor (PS), as well as an LED driver on a single chip. The device is connected by an I²C™* interface to a microcontroller. Other I²C™ or SMBus devices can be connected to the same interface.

The device has a programmable interrupt with hysteresis to respond to events and reduce the microcontroller tasks.



Dynamic range : 0.006 lux to 32,000 lux ALS measurement uses CS green filtered values Temperature compensation CS/ALS output resolution: 14 to 18 bits Linear output code 50ms conversion rate for 14-bit resolution 50Hz/60Hz light flicker immunity Fluorescent light flicker immunity

      

The device allows adjusting the brightness as well as the color of the display panel. This device can also measure distance in parallel with ALS and CS measurements in order to deactivate the touch screen during phone calls.

CS Features Temperature compensation CS/ALS output resolution: 14 to 18 bits Linear output code 50ms conversion rate for 14-bit resolution 50Hz/60Hz light flicker immunity Fluorescent light flicker immunity

  

Features   

  

 

5 integrated photodiodes (1 proximity diode and 4 diodes for white, green, blue, and red channels) 5 analog-to-digital converters (ADCs) to measure PS in parallel to ALS/CS I²C™ capable of standard mode (100kHz) or fast mode (400kHz) communication; 1.8V logic compatible Programmable interrupt function for ALS (green channel) and PS with upper and lower thresholds PS measurement parallel to ALS/CS measurements Many measurement modes: PS+ALS+CS, ALS+CS, PS+ALS, PS only, ALS only, CS only



Physical Characteristics Wide operation temperature: -40 to +90 °C Wide supply voltage: 2.4 to 3.6 V Low supply current: < 200µA (LED driver excluded) Low standby current: < 2µA

   

ZOPT3100 Application Circuit VDD

PS Features    

 

High ambient light suppression Built-in LED driver and detector Detection of movement (in/out) Cancelation of crosstalk (lowest PS value is stored and subtracted from output value to memorize the reflection quantity) Programmable pulsed LED driver: up to 125mA output current 11-bit resolution

* I2C is a trademark of NXP.

Visit www.zmdi.com for more detailed information

LED VDD

3.3V

3.3V VDD

VDD SCL SDA INT

PWM

SCL SDA INT

SEL AGND

LED_GND ZOPT3100

VSS Microcontroller

For more information, contact ZMDI via mobile.sensing@zmdi.com.

© 2013 Zentrum Mikroelektronik Dresden AG — Rev. 1.01 — September 13, 2013. All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. The information furnished in this publication is subject to changes without notice.

52

ZOPT3100

Digital RGB/Ambient Light + Proximity Sensor IC

ZOPT3100 Block Diagram

VDD 2.4 to 3.6V

Regulator ADC

Main State Machine

Fuses

ADC ADC ADC

CS/ALS FSM

Interrupt FSM

Reference

INT

Register File SDA

Bandgap

I²C PS FSM

SCL SEL

Dual Slope ADC 11 Bit

Applications  Cellular phones

POR

 Notebooks

IR LED

 Consumer devices

PWM

OSC

IR LED Driver LED GND

AGND

= Analog Block

= Digital Block

Ordering Information Product Sales Code

Description

Package

ZOPT3100AC6B

ZOPT3100 die — Temperature Range: -40 to +90 °C

Unsawn wafer

ZOPT3100 KIT

ZOPT3100 Evaluation Kit, including Evaluation Board, cable, and 1 IC sample

Kit

Sales and Further Information

www.zmdi.com

mobile.sensing@zmdi.com

Zentrum Mikroelektronik Dresden AG Global Headquarters Grenzstrasse 28 01109 Dresden, Germany

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA

Central Office: Phone +49.351.8822.0 Fax +49.351.8822.600

USA Phone +855.275.9634 Phone +408.883.6310 Fax +408.883.6358

European Technical Support Phone +49.351.8822.7.772 Fax +49.351.8822.87.772

DISCLAIMER: This information applies to a product under development. Its characteristics and specifications are subject to change without notice.

Zentrum Mikroelektronik Dresden AG (ZMD AG) assumes no obligation regarding future manufacture unless otherwise agreed to in writing. The information furnished hereby is believed to be true and accurate. However, under no circumstances shall ZMD AG be liable to any customer, licensee, or any other third party for any special, indirect, incidental, or consequential damages of any kind or nature whatsoever arising out of or in any way related to the furnishing, performance, or use of this technical data. ZMD AG hereby expressly disclaims any liability of ZMD AG to any customer, licensee or any other third party, and any such customer, licensee and any other third party hereby waives any liability of ZMD AG for any damages in connection with or arising out of the furnishing, performance or use of this technical data, whether based on contract, warranty, tort (including negligence), strict liability, or otherwise.

European Sales (Stuttgart) Phone +49.711.674517.55 Fax +49.711.674517.87955

Zentrum Mikroelektronik Dresden AG, Japan Office 2nd Floor, Shinbashi Tokyu Bldg.

4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan

ZMD FAR EAST, Ltd. 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

Phone +81.3.6895.7410 Fax +81.3.6895.7301

Phone +886.2.2377.8189 Fax +886.2.2377.8199

Zentrum Mikroelektronik Dresden AG, Korea Office U-space 1 Building 11th Floor, Unit JA-1102 670 Sampyeong-dong Bundang-gu, Seongnam-si Gyeonggi-do, 463-400 Korea Phone +82.31.950.7679 Fax +82.504.841.3026

Global Corporate Catalog

© 2013 Zentrum Mikroelektronik Dresden AG — Rev. 1.01— September 13, 2013. All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. The information furnished in this publication is subject to changes without notice.

53

Products available at ZMDI On-Line Store

ZOPT3100 Application Overview ZMDI‘s Optical Sensor IC

ZOPT3100’s Integrated Ambient Light Sensor (ALS)

ZOPT3100’s Integrated Color Sensor (CS)

• Dynamic range: 0.006 lux to 32,000 lux

• Temperature compensation

• ALS measurement uses CS green filtered values

• CS output resolution: 14 to 18 bits

• Temperature compensation • ALS output resolution: 14 to 18 bits • 50ms conversion rate for 14-bits resolution

• Linear output code • 50ms conversion rate for 14-bit resolution

• Linear output code

• 50Hz/60Hz light flicker immunity

• 50Hz/60Hz light flicker immunity

• Fluorescent light flicker immunity

• Fluorescent light flicker immunity

ZOPT3100 Physical Characteristics • Unique, all-in-one optical sensor IC – integrated ambient light sensor, color sensor, proximity sensor, and IR LED • Low-power – ideal for mobile applications including consumer devices, cell phones, notebooks • Current consumption: 200μA (LED driver excluded); low standby mode current: 2μA (see data sheet for conditions) • Maximum temperature range: -40 to +90°C

ZOPT3100’s Integrated Proximity Sensor (PS) • High ambient light suppression • Built-in LED driver and detector • Detection of movement (in/out) • Cancelation of cross-talk (lowest PS value is stored and subtracted from output value to memorize the reflection quantity) • Programmable pulsed LED driver: up to 125mA output current • 11-bit resolution

• Supply voltage: 2.4 to 3.6 VDC • Available as die

Visit www.zmdi.com for more detailed information

54

Automotive ASSICs and Industrial ASSPs Multi-Functional and Robust

The Fast Track to Energy-Efficient Vehicles ZMDIâ&#x20AC;&#x2122;s Leading-Edge Automotive: Precise, Rugged, Versatile and Low-Power



IOLink compliant HV Line Driver (Single Channel)

ZIOL2201

IO-Link compliant HV Line Driver (Single Channel)





The ZIOL2201 is a smart power solution of a line 1 driver/level shifter IC containing an HV I/Ochannel having a wide range of configurable system features.

It addresses the physical layer of sensor/actuator systems in factory automation and is especially designed to support the communication standard IO Link.



The output driver is a push pull stage which reaches an RDSon of less than 6.6 Ohms at all operational temperatures.

The configuration is stored in an onchip EEPROM and automatically loaded into the IC’s control register during power up. The IC also provides status information, such as overload and over temperature. An implemented SPI interface supports access to configuration and status registers.

The IC is produced in a powerful CMOS Mixed Signal Technology that allows supply voltages up to 40V. The EEPROM read/write functionality is guaranteed within the entire operating temperature range in combination with a low Voltage core supply of 3.3V.

           

Output current limitation (50  300mA) Standard cable driver/ physical layer transceiver for IOLink (Device) Slewrate controlled driver Wide range of configurable feature set which is automatically loaded after power on reset Onboard DC/DC converter 2 IOLink specific WURQ detection On chip registers and EEPROM for system configuration and status information SPI to access on chip registers and EEPROM Dig. interface: 3.3V output, 5V tolerant inputs Chip temperature monitoring/diagnosis Overcurrent and temperature signaling

      

Configurable feature set Non volatile storage of system configuration Excellent EMC performance due to adjustable output slew rate control Low RDSon of 6.6 Ohms Programmable limitation of driver output current DC/DC converter on Chip EEPROM read/write functionality within entire operating temperature range Space saving 4x4 mm² 24 pin QFN

  

Evaluation Kits Application Notes

   

Operation temperature 40 to +85 °C Supply voltage 8.0 to 36.0 V QFN 24 package



 1 2

High Voltage (max. power supply / signal swing is 36 volt) IOLink device wakeup 20112.1.0 All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.

The information furnished in this publication is and subject to changes without notice.

Visit www.zmdi.com for more detailed information

56



IOLink compliant HV Line Driver (Single Channel)





The ZIOL2201 application field is acting as universal cable driver.

Furthermore the IC supports IOLink communications as physical layer transceiver (PHY) for IOLink master ports and IOLink devices.

An integrated DC/DC converter in combination with two linear voltage regulators allows optimizing the power supply of the application.  

24V line driver/level shifter IOLink compliant devices

Note: The datasheet  contains detailed technical information

 (# stands for the device revision) 





#

Single Channel IOLink compliant HV Line Driver IC, packing: 13” reel

PQFN24, 4x4

#

Single Channel IOLink compliant HV Line Driver IC, packing: 7” tray

PQFN24, 4x4

 

ZIOL2401 LabKit for detailed lab evaluation (suitable for ) (configurable IC/Communication/Controller PCB, software, USBcable)

 

ZIOL2401 Introduction tool (USB stick, extension board, software) (suitable for )







 



 



Grenzstrasse 28 01109 Dresden Germany

8413 Excelsior Drive Suite 200 Madison, WI 53717 USA

Phone Fax

Phone Fax

Phone Fax

Phone Fax

+49 (0)351.8822.7465 +49 (0)351.8822.87465

+1 (608) 8291987 +1 (631) 5492882

2nd Floor, Shinbashi Tokyu Bldg.

4213, Shinbashi, Minatoku Tokyo, 1050004 Japan +81.3.6895.7410 +81.3.6895.7301

3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

+886 2 2377 8189 +886 2 2377 8199

DISCLAIMER: This information applies to a product under development. Its characteristics and specifications are and subject to change without notice. Zentrum Mikroelektronik Dresden AG (ZMD AG) assumes no obligation regarding future manufacture unless otherwise agreed to in writing. The information furnished hereby is believed to be true and accurate. However, under no circumstances shall ZMD AG be liable to any customer, licensee, or any other third party for any special, indirect, incidental, or consequential damages of any kind or nature whatsoever arising out of or in any way related to the furnishing, performance, or use of this technical data. ZMD AG hereby expressly disclaims any liability of ZMD AG to any customer, licensee or any other third party, and any such customer, licensee and any other third party hereby waives any liability of ZMD AG for any damages in connection with or arising out of the furnishing, performance or use of this technical data, whether based on contract, warranty, tort (including negligence), strict liability, or otherwise. 20112.1.0 All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.

The information furnished in this publication is and subject to changes without notice.

Global Corporate Catalog

57

Products available at ZMDI On-Line Store

ZIOL2211

IO-Link-Compliant HV Line Driver (Single Channel)

ZIOL2211

IO-Link compliant HV Line Driver (Single Channel)

Brief Description

Benefits

The ZIOL2211 is a line driver/level shifter IC that 1 provides an HV I/O channel with a wide range of configurable system features. It addresses the physical layer of sensor/actuator systems in factory automation applications, and it is specifically designed to 2 support the communication standard IO-Link .



The output driver is a push-pull stage that reaches an RDSon of less than 6.6Ω at all operational temperatures.



The configuration is stored in an on-chip EEPROM and automatically loaded into the ZIOL2211’s control register during power-up. The ZIOL2211 also provides status information, such as overload and overtemperature. An integrated SPI interface supports access to configuration and status registers.

The ZIOL2211 is fabricated in a powerful CMOS Mixed Signal Technology that allows supply voltages up to 40V. The EEPROM read/write functionality is guaranteed within the entire operating temperature range in combination with a low-voltage core supply of 3.3V.

Features          

Output current limitation: 50mA to 410mA Standard cable driver / physical-layer transceiver for IO-Link (device) Slew-rate controlled driver Wide range for configurable feature set that is automatically loaded after power-on reset 3 IO-Link specific WURQ detection On-chip registers and EEPROM for system configuration and status information SPI interface for access on chip registers and EEPROM Digital interface: 3.3V output, 5V-tolerant inputs Chip temperature monitoring/diagnosis Over-current and over-temperature indication

 

  

Configurable feature set Nonvolatile storage of system configuration Excellent electromagnetic compatibility (EMC) performance due to adjustable output slew rate control Low RDSon: 6.6Ω Programmable limitation of driver output current EEPROM read/write functionality within entire operating temperature range Space saving package options

Available Support  

Evaluation Kits Application Notes

Physical Characteristics   

Operation temperature: -40 to +85 °C Supply voltage: 8.0V to 36.0V Package options: PQFN 24 4x4 mm, WL-CSP 35 2.5x2.5mm

ZIOL2211 Application Circuits sensor

ZIOL2211

SIO

sensor

ZIOL2211

IO-L

ZIOL24x1

actuator

ZIOL2211

IO-L

ZIOL24x1

Traditional PLC

IO-Link PLC (master) sensor

ZIOL2211

sensor

ZIOL2211

IO-L

ZIOL24x1

1

HV: high voltage (maximum power supply / signal swing is 36V) ZMDI is a member of the IO-Link Consortium: www.io-link.com 3 IO-Link device wake-up 2

© 2012 Zentrum Mikroelektronik Dresden AG — Rev. 2.20 All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.

The information furnished in this publication is subject to changes without notice.

Visit www.zmdi.com for more detailed information

58

ZIOL2211

IO-Link-Compliant HV Line Driver (Single Channel)

Typical Applications

ZIOL2211 Block Diagram

In field applications, the ZIOL2211 acts as a universal cable driver.

The ZIOL2211 can support IO-Link communications as a physical-layer transceiver (PHY) for IO-Link master ports and IO-Link devices.

ZIOL2211 Configuration Diagnosis

Common applications:  

Cable Side High Voltage (HV) Signals

Application Side Low Voltage (LV) Signals

24V line driver/level shifter IO-Link-compliant devices

Actuator, Sensor, or Interface to Host System

See the ZIOL2xxx IC Family datasheet for detailed technical information.

Control

Application Circuit

Power Supply

COM

Power

RX/TX

Ch 0

Cable

Single channel transceiver

GND

Ordering Information Product Sales Code

Description

IC Package

ZIOL2211BI1R

Single Channel IO-Link-compliant HV Line Driver IC, packaging; 13” reel

PQFN24, 4x4mm

ZIOL2211BI1W

Single Channel IO-Link-compliant HV Line Driver IC, packaging; 7” tray

PQFN24, 4x4mm

ZIOL2211BI2R (CSP) Single Channel IO-Link-compliant HV Line Driver IC, packaging; reel

WL-CSP35, 2.5x2.5mm

ZIOL2401-Lab Kit

ZIOL2401 lab kit for evaluation of the ZIOL2xxx family including ZIOL2211: configurable IC/communication/controller circuit board, software, USB cable

ZIOL2401-Starter Kit

ZIOL2401 demonstration tool for the ZIOL2xxx family including ZIOL2211(USB stick, extension board, software)

Sales and Further Information

www.zmdi.com

io-link@zmdi.com

Zentrum Mikroelektronik Dresden AG Grenzstrasse 28 01109 Dresden Germany

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA

Zentrum Mikroelektronik Dresden AG, Japan Office 2nd Floor, Shinbashi Tokyu Bldg.

4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan

ZMD FAR EAST, Ltd. 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

Zentrum Mikroelektronik Dresden AG, Korean Office POSCO Centre Building West Tower, 11th Floor 892 Daechi, 4-Dong, Kangnam-Gu Seoul, 135-777 Korea

Phone +49.351.8822.7465 Fax +49.351.8822.87465

Phone +855-ASK-ZMDI (+855.275.9634)

Phone +81.3.6895.7410 Fax +81.3.6895.7301

Phone +886.2.2377.8189 Fax +886.2.2377.8199

Phone +82.2.559.0660 Fax +82.2.559.0700

DISCLAIMER: This information applies to a product under development. Its characteristics and specifications are subject to change without notice. Zentrum Mikroelektronik Dresden AG (ZMD AG) assumes no obligation regarding future manufacture unless otherwise agreed to in writing. The information furnished hereby is believed to be true and accurate. However, under no circumstances shall ZMD AG be liable to any customer, licensee, or any other third party for any special, indirect, incidental, or consequential damages of any kind or nature whatsoever arising out of or in any way related to the furnishing, performance, or use of this technical data. ZMD AG hereby expressly disclaims any liability of ZMD AG to any customer, licensee or any other third party, and any such customer, licensee and any other third party hereby waives any liability of ZMD AG for any damages in connection with or arising out of the furnishing, performance or use of this technical data, whether based on contract, warranty, tort (including negligence), strict liability, or otherwise. © 2012 Zentrum Mikroelektronik Dresden AG — Rev. 2.20 All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.

The information furnished in this publication is subject to changes without notice.

Global Corporate Catalog

59

Products available at ZMDI On-Line Store





ZIOL2401

IO-Link compliant HV Line Driver (Dual Channel) 





                                     

 

                                                                    



   



       

  

    

      



            

             



  

 

 

Visit www.zmdi.com for more detailed information

   

60











               



  

 

  



 

  

     







 











 



  



















 















 



 



  

   

   

   

   

   

   

   

         

Global Corporate Catalog

61

Products available at ZMDI On-Line Store



IOLink compliant HV Line Driver (Dual Channel)

ZIOL2411

IO-Link compliant HV Line Driver (Dual Channel)





The ZIOL2411 is a line driver/level shifter IC with two 1 independent HV I/Ochannels having a wide range of configurable system features. It addresses the physical layer of sensor/actuator systems in factory automation and is especially designed to support the communication standard IOLink.



The output drivers are push pull stages which reach in tandem mode an RDSon of less than 3.3 Ohms at all operational temperatures.

The configuration is stored in an onchip EEPROM and automatically loaded into the IC’s control register during power up. The IC also provides status information, such as overload and over temperature. An implemented SPI interface supports access to configuration and status registers.

     

Configurable feature set Non volatile storage of system configuration Excellent EMC performance due to adjustable output slew rate control Low RDSon of 3.3 Ohms in tandem mode Programmable limitation of driver output current EEPROM read/write functionality within entire operating temperature range Space saving 4x4 mm² 24 pin QFN

  

Evaluation Kits Application Notes

The IC is produced in a powerful CMOS Mixed Signal Technology that allows supply voltages up to 40V. The EEPROM read/write functionality is guaranteed within the entire operating temperature range in combination with a low Voltage core supply of 3.3V.







         

  

Operation temperature 40 to +85 °C Supply voltage 8.0 to 36.0 V QFN 24 package

Output current limitation (50  300mA) Standard cable driver/ physical layer transceiver for IOLink (Master & Device) Slewrate controlled drivers Wide range of configurable feature set which is automatically loaded after power on reset IOLink specific WURQ2 detection On chip registers and EEPROM for system configuration and status information SPI to access on chip registers and EEPROM Dig. interface: 3.3V output, 5V tolerant inputs Chip temperature monitoring/diagnosis Overcurrent and temperature signaling 

1 2

High Voltage (max. power supply / signal swing is 36 volt) IOLink device wakeup 2.1.0 All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.

The information furnished in this publication is and subject to changes without notice.

Visit www.zmdi.com for more detailed information

62



IOLink compliant HV Line Driver (Dual Channel)





The ZIOL2411 application field is acting as universal cable driver.

Furthermore the IC supports IOLink communications as physical layer transceiver (PHY) for IOLink master ports and IOLink devices.   

24V line driver/level shifter IOLink compliant master IOLink compliant device

Note: The datasheet  contains detailed technical information.

(# stands for the device revision) 





#

Dual Channel IOLink compliant HV Line Driver, packing: 13” reel

QFN24, 4x4

#

Dual Channel IOLink compliant HV Line Driver, packing: 7” reel

QFN24, 4x4

 

ZIOL2401 LabKit for detailed lab evaluation (suitable for ) (configurable IC/Communication/Controller PCB, software, USBcable)

 

ZIOL2401 Introduction tool (USB stick, extension board, software) (suitable for )







 



 



Grenzstrasse 28 01109 Dresden Germany

8413 Excelsior Drive Suite 200 Madison, WI 53717 USA

Phone Fax

Phone Fax

Phone Fax

Phone Fax

+49 (0)351.8822.7465 +49 (0)351.8822.87465

+1 (608) 8291987 +1 (631) 5492882

2nd Floor, Shinbashi Tokyu Bldg.

4213, Shinbashi, Minatoku Tokyo, 1050004 Japan +81.3.6895.7410 +81.3.6895.7301

3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

+886 2 2377 8189 +886 2 2377 8199

DISCLAIMER: This information applies to a product under development. Its characteristics and specifications are and subject to change without notice. Zentrum Mikroelektronik Dresden AG (ZMD AG) assumes no obligation regarding future manufacture unless otherwise agreed to in writing. The information furnished hereby is believed to be true and accurate. However, under no circumstances shall ZMD AG be liable to any customer, licensee, or any other third party for any special, indirect, incidental, or consequential damages of any kind or nature whatsoever arising out of or in any way related to the furnishing, performance, or use of this technical data. ZMD AG hereby expressly disclaims any liability of ZMD AG to any customer, licensee or any other third party, and any such customer, licensee and any other third party hereby waives any liability of ZMD AG for any damages in connection with or arising out of the furnishing, performance or use of this technical data, whether based on contract, warranty, tort (including negligence), strict liability, or otherwise.

2.1.0 All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.

The information furnished in this publication is and subject to changes without notice.

Global Corporate Catalog

63

Products available at ZMDI On-Line Store

ASI4U / ASI4U-E / ASI4U-F

Spec.

3.0 Compliant Universal AS-I IC ASI4U / ASI4U-E / ASI4U-F

Spec. 3.0 Compliant Universal AS-I IC

Brief Description

Benefits

ASI4U is a new generation CMOS integrated circuit for AS-I networks.

The low-level field bus AS-I (Actuator Sensor Interface) was designed for easy, safe and costeffective interconnection of sensors, actuators and switches. It transports both power and data over the same two-wire unshielded cable.

ASI4U is used as a part of a master or slave node and works as an interface to the physical bus. The device realizes power supply, physical data transfer and communication protocol handling. ASI4U is fully compliant with AS-I Complete Specification 3.0 and functioning and PIN compatible with the A²SI IC. All configuration data are stored in an internal EEPROM that can be easily programmed by a stationary or handheld programming device. The special AS-I safety option assures short response times regarding security related events.

 Flexible, separated I/Os

Features

 Operational temp. range: -25 to +105°C (ASI4U-E)

 Compliant with AS-I Complete Specification V3.0

 SSOP28 (ASI4U) / SOP28 (ASI4U-E) package

 Universal application: in slaves, masters, repeaters and bus-monitors

ASI4U Basic Application Circuit

 Flexible AS-I Bus adoption (isolated transceiver)  Very small package SSOP 28 (ASI4U)  Supports AS-I complete Specification V3.0  Supports high ambient temperature applications (ASI4U-E)

Available Support  ZMDI AS-Interface Programmer Kit USB  ZMDI ASI4U Evaluation Board V2.0

Physical Characteristics  Operational temp. range: -25 to +85°C (ASI4U)  Operational temp. range: -40 to +85°C (ASI4U-F)

 Compatible with A²SI

UIN

 Floating AS-I transmitter and receiver for high symmetrical high power applications

DSR PST

ASI+

ASIP

DI0...3 DO0...3

ASI-

ASIN

ASI4U

P0...3

CAP

 Two configurable LED outputs to support all Spec.

V3.0 status indication modes

U5R

LED1 LED2 0V

IRD GND +0V

Standard Application

 Additional addressing channel for easy wireless module setup

+24V

UIN

 Support of 8 / 16 MHz crystals by automatic frequency detection  Special AS-I safety option  Clock watchdog for high system security

+24V

FID

OSC2

 On-chip electronic inductor with current drive capability of 55 mA

 Several data pre-processing functions, including configurable data input filters and bit selective data inverting

UOUT

OSC1

UOUT FID

OSC1

DSR PST

OSC2 ASI+

ASIP

DI0...3 DO0...3

ASI-

ASIN

ASI4U

P0...3

CAP U5R

LED1 LED2 IRD

0V GND

+0V

Extended Power Application with IR-Addressing Option

Visit www.zmdi.com for more detailed information

© 2012 Zentrum Mikroelektronik Dresden AG— Rev. 2.2 All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.

The information furnished in this publication is subject to changes without notice.

64

ASI4U / ASI4U-E / ASI4U-F Spec. 3.0 Compliant Universal AS-I IC

Typical Applications

ASI4U Block Diagram

 AS-I Master Modules  AS-I Slave Modules  AS-I Safety Modules

Ordering Information Operating Temperature Range

Type

ASI4UE-G1-ST

Standard -25°C to +85°C

SSOP28 / 5.3mm

Y

ASI4UE-G1-SR

Standard -25°C to +85°C

SSOP28 / 5.3mm

Y

ASI4UE-G1-SR-7

Standard -25°C to +85°C

SSOP28 / 5.3mm

Y

ASI4UE-G1-MT

Master

-25°C to +85°C

SSOP28 / 5.3mm

Y

ASI4UE-G1-MR

Master

-25°C to +85°C

SSOP28 / 5.3mm

Y

ASI4UE-E-G1-ST

Standard -25°C to +105°C

SOP28 / 300 mil

Y

ASI4UE-E-G1-SR

Standard -25°C to +105°C

SOP28 / 300 mil

Y

ASI4UE-F-G1-ST

Standard -40°C to +85°C

SSOP28 / 5.3mm

Y

ASI4UE-F-G1-SR

Standard -40°C to +85°C

SSOP28 / 5.3mm

Y

Sales and Further Information

Package Type

RoHS Packaging Conform

Ordering Code

Minumum Order Quantity

Tube (47 parts/tube) Tape & Reel (1500 parts/reel) Tape & Reel (500 parts/reel) Tube (47 parts/tube) Tape & Reel (1500 parts/reel) Tube (27 parts/tube) Tape & Reel (1000 parts/reel) Tube (47 parts/tube) Tape & Reel (1500 parts/reel)

www.zmdi.com

470 pcs.

(10 tubes) 1500 pcs. (one reel) 500 pcs. (one 7" reel) 470 pcs.

(10 tubes) 1500 pcs. (one reel) 270 pcs.

(10 tubes) 1000 pcs. (one reel) 470 pcs.

(10 tubes) 1500 pcs. (one reel)

asi@zmdi.com

Zentrum Mikroelektronik Dresden AG Grenzstrasse 28 01109 Dresden Germany

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA

Zentrum Mikroelektronik Dresden AG, Japan Office 2nd Floor, Shinbashi Tokyu Bldg.

4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan

ZMD FAR EAST, Ltd. 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

Zentrum Mikroelektronik Dresden AG, Korean Office POSCO Centre Building West Tower, 11th Floor 892 Daechi, 4-Dong, Kangnam-Gu Seoul, 135-777 Korea

Phone +49.351.8822.7274 Fax +49.351.8822.87274

Phone +855-ASK-ZMDI (+855.275.9634)

Phone +81.3.6895.7410 Fax +81.3.6895.7301

Phone +886.2.2377.8189 Fax +886.2.2377.8199

Phone +82.2.559.0660 Fax +82.2.559.0700

Global Corporate Catalog

DISCLAIMER: This information applies to a product under development. Its characteristics and specifications are subject to change without notice. Zentrum Mikroelektronik Dresden AG (ZMD AG) assumes no obligation regarding future manufacture unless otherwise agreed to in writing. The information furnished hereby is believed to be true and accurate. However, under

Products available at ZMDI On-Line Store

65 no circumstances shall ZMD AG be liable to any customer, licensee, or any other third party for any special, indirect, incidental, or consequential damages of any kind or nature whatsoever arising out of or in any way related to the furnishing, performance, or use of this technical data. ZMD AG hereby expressly disclaims any liability of ZMD AG to any customer, licensee or any other third party, and any such customer, licensee and any other third party hereby waives any liability of ZMD AG for any damages in connection with or arising out of the furnishing, performance or use of this technical data, whether based on contract, warranty, tort (including negligence), strict liability, or otherwise.

SAP5S / SAP51

Universal Actuator-Sensor Interface IC

SAP5S / SAP51

Universal Actuator-Sensor Interface IC

Brief Description

Benefits

SAP5S/SAP51 is a new generation CMOS integrated circuit for AS-I networks.

The low-level field bus AS-I (Actuator Sensor Interface) was designed for easy, safe and costeffective interconnection of sensors, actuators and switches. It transports both power and data over the same two-wire unshielded cable.

SAP5S/SAP51 is used as a part of a master or slave node and works as an interface to the physical bus.

The device realizes power supply, physical data transfer and communication protocol handling and is fully compliant with AS-Interface Complete Specification V3.0.

SAP5S/SAP51 can be programmed by the user to operate in Standard Slave Mode, Safety Mode SAP5S only) or Master Mode.

The special AS-I Safety Mode (SAP5S only) assures short response times regarding security related events.

All configuration data are stored in an internal EEPROM that can be easily programmed by a stationary or handheld programming device.

SAP5S / SAP51 is optimized for harsh environments by it’s special burst protection circuitry and excellent electromagnetic compatibility.

 Cost savings due to integrated Safety code Generator (SAP5S)  Functional and pin compatible to SAP4.1  Automatic x-tal detection (5,3333MHz or 16,0000MHz)  Supports AS-I complete Specification 3.0

Available Support  ZMDI AS-Interface Programmer Kit USB  ZMDI SAP5 Evaluation Board V2.0

Physical Characteristics  Operational temperature range: -25 to +85°C  SOP16 and SOP20 package

SAP5S/SAP51 Basic Application Circuit UIN

UOUT

+24V

PFAULT

OSC1

DSTBn PSTBn

OSC2 LTGP

ASI+

LTPN

ASI-

CDC

SAP51/ SAP5S

D0...3 P0...3

U5R

Features

LED1 LED2

 Compliant with ASI Complete Specification V3.0  Integrated safety code generator (SAP5S only)  Universal application: in slaves, masters, repeaters and bus-monitors  On-chip electronic inductor: 55 mA current drive capability

UIN

 Two LED outputs to support Spec. V3.0 status indication modes  User programmable to operation in Standard Slave Mode, Safety Mode or Master Mode  Supports 5.33/16 MHz crystals by automatic frequency detection  Data pre-processing functions  Special burst protection circuitry

+0V

Standard Application

UOUT U5R

OSC1

OSC2 ASI+

D2

LTGP

D3

ASI-

LTPN

SAP5S

CDC

D0 D1

 Excellent electromagnetic compatibility  Clock and communication watchdogs for high system security

Visit www.zmdi.com for more detailed information

Safety Mode Slave Application

© 2012 Zentrum Mikroelektronik Dresden AG — Rev. 3.1 All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.

The information furnished in this publication is PRELIMINARY and subject to changes without notice.

66

SAP5S / SAP51

Universal Actuator-Sensor Interface IC

Typical Applications

SAP5S/SAP51 Block Diagram

 AS-I Master Modules  AS-I Slave Modules  AS-I Safety Modules (SAP5S only)

Ordering Information Ordering Code

SAP5SD-A-G1-T SAP51D-A-G1-T SAP5SD-A-G1-R SAP51D-A-G1-R SAP5SD-B-G1-T SAP51D-B-G1-T SAP5SD-B-G1-R SAP51D-B-G1-R

Operating Temperature Range

Package Type

RoHS Conform

Packaging

Minimum Order Quantity

-25°C to +85°C

SOP20 / 300 mil

Y

Tubes (37 parts/tube)

370 pcs.

(10 tubes)

-25°C to +85°C

SOP20 / 300 mil

Y

Tape & Reel (1000 parts/reel)

1000 pcs. (one reel)

-25°C to +85°C

SOP16 / 300 mil

Y

Tubes (46 parts/tube)

460 pcs.

(10 tubes)

-25°C to +85°C

SOP16 / 300 mil

Y

Tape & Reel (1000 parts/reel)

1000 pcs. (one reel)

Sales and Further Information

www.zmdi.com

asi@zmdi.com

Zentrum Mikroelektronik Dresden AG Grenzstrasse 28 01109 Dresden Germany

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA

Zentrum Mikroelektronik Dresden AG, Japan Office 2nd Floor, Shinbashi Tokyu Bldg.

4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan

ZMD FAR EAST, Ltd. 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

Zentrum Mikroelektronik Dresden AG, Korean Office POSCO Centre Building West Tower, 11th Floor 892 Daechi, 4-Dong, Kangnam-Gu Seoul, 135-777 Korea

Phone +49.351.8822.7274 Fax +49.351.8822.87274

Phone +855-ASK-ZMDI (+855.275.9634)

Phone +81.3.6895.7410 Fax +81.3.6895.7301

Phone +886.2.2377.8189 Fax +886.2.2377.8199

Phone +82.2.559.0660 Fax +82.2.559.0700

DISCLAIMER: This information applies to a product under development. Its characteristics and specifications are subject to change without notice. Zentrum Mikroelektronik Dresden AG (ZMD AG) assumes no obligation regarding future manufacture unless otherwise agreed to in writing. The information furnished hereby is believed to be true and accurate.

However, under no circumstances shall ZMD AG be liable to any customer, licensee, or any other third party for any special, indirect, incidental, or consequential damages of any kind or nature whatsoever arising out of or in any way related to the furnishing, performance, or use of this technical data. ZMD AG hereby expressly disclaims any liability of ZMD AG to any customer, licensee or any other third party, and any such customer, licensee and any other third party hereby waives any liability of ZMD AG for any damages in connection with or arising out of the furnishing, performance or use of this technical data, whether based on contract, warranty, tort (including negligence), strict liability, or otherwise.

Global Corporate Catalog

67

Products available at ZMDI On-Line Store

ZLED7000

40V LED Driver with Internal Switch

ZLED7000

40V LED Driver with Internal Switch

Brief Description

Features

The ZLED7000, one of our ZLED Family of LED control ICs, is an inductive step-down converter that is optimal for driving a single LED or multiple LEDs (connected in series) from a voltage source greater than the voltage rating of the LED. The ZLED7000 operates in continuous mode. Capable of operating efficiently with voltage supplies ranging from 6 VDC to 40 VDC, it is ideal for low-voltage lighting applications. The ZLED7000 minimizes current consumption by remaining in a lowcurrent standby mode (output is off) until a voltage of ≥0.3V is applied to the ADJ pin.

 Capable of up to 95% efficiency*  Operates in continuous mode with a wide input range from 6 VDC to 40 VDC  Integrated 40V power switch  One pin on/off or brightness control via PWM or DC voltage control signal input  Switching frequency: ≤ 1MHz  Dimming rate: 1200:1 (typical)  Output current accuracy: 5% (typical)  Built-in thermal shutdown and open-circuit protection for LED  Very few external components needed for operation  Broad range of applications: outputs up to ≤750mA  SOT89-5 package

In operating mode, the ZLED7000 can source LEDs with an output current of ≤ 750mA (≤ 30 watts of output power) that is externally adjustable.* The ZLED7000’s integrated output switch and high-side current sensing circuit use an external resistor to adjust the average output current. Linearity is achieved via an external control signal at the ZLED7000’s ADJ pin, implemented either as a pulse-width modulation (PWM) waveform for a gated output current or a DC voltage for a continuous current.

Application Examples  Illuminated LED signs and other displays  LED traffic and street lighting (low-voltage)  Architectural LED lighting, including low-voltage applications for buildings  Halogen replacement LEDs (low-voltage)  LED backlighting  General purpose exterior and interior LED lighting, including applications requiring low-voltage  General purpose low-voltage industrial applications

ZLED7000 Application Circuit 6 to 40 VDC

RS

VS

D1

5

C1

ISENSE

VIN

1μF 3

ZLED7000 ADJ

GND 2

Visit www.zmdi.com for more detailed information *

See section 2.3 in the data-sheet for details

n LED

4

LX

1

L1 47μH

68

ZLED7000

40V LED Driver with Internal Switch

SOT89-5 Package Dimensions and Pin Assignments D D1

LX E1

E

VIN

GND

Thermal Pad

b1

ADJ

L e

ISENSE

b

e1

Dimension (mm)

Symbol

Symbol

Dimension (mm)

Min

Max

Min

Max

A

1.400

1.600

E

2.300

2.600

b

0.320

0.520

E1

3.940

4.250

b1

0.360

0.560

e

c

0.350

0.440

e1

2.900

1.500 Typ 3.100

D

4.400

4.600

L

0.900

1.100

D1

1.400

1.800

Ordering Information Product Sales Code

Description

Package

ZLED7000-ZI1R

ZLED7000 â&#x20AC;&#x201C; 40V LED Driver

SOT89-5 (Tape & Reel)

ZLED7000KIT-D1

ZLED7000 used in a MR16 Halogen replacement Demo Kit 12VAC/VDC, including 1 ZLED-PCB1

Kit

ZLED-PCB1

Test PCB with one 3W white High Brightness (HB) LED, cascadable to one multiple LED string

Printed Circuit Board (PCB)

ZLED-PCB2

10 unpopulated test PCBs for modular LED string with footprints of 9 common HB LED types

Printed Circuit Board (PCB)

Sales and Further Information

www.zmdi.com

Zentrum Mikroelektronik Dresden AG (ZMD AG)

ZMD America, Inc.

Zentrum Mikroelektronik Dresden AG, Japan Office

ZMD Far East, Ltd.

Grenzstrasse 28 01109 Dresden Germany

8413 Excelsior Drive Suite 200 Madison, WI 53717 USA

Phone +49 (0)351.8822.7.533 Fax +49(0)351.8822.8.7533

Phone +1 (608) 829-1987 Fax +1 (631) 549-2882

Phone +81.3.6895.7410 Fax +81.3.6895.7301

Phone +886.2.2377.8189 Fax +886.2.2377.8199

LED_Drivers@zmdi.com

2nd Floor, Shinbashi Tokyu Bldg.

4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan

3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

DISCLAIMER: This information applies to a product under development. Its characteristics and specifications are subject to change without notice. Zentrum Mikroelektronik Dresden AG (ZMD AG) assumes no obligation regarding future manufacture unless otherwise agreed to in writing. The information furnished hereby is believed to be true and accurate. However, under no circumstances shall ZMD AG be liable to any customer, licensee, or any other third party for any special, indirect, incidental, or consequential damages of any kind or nature whatsoever arising out of or in any way related to the furnishing, performance, or use of this technical data. ZMD AG hereby expressly disclaims any liability of ZMD AG to any customer, licensee or any other third party, and any such customer, licensee and any other third party hereby waives any liability of ZMD AG for any damages in connection with or arising out of the furnishing, performance or use of this technical data, whether based on contract, warranty, tort (including negligence), strict liability, or otherwise.

Global Corporate Catalog

69

Products available at ZMDI On-Line Store

ZLED7001

Universal LED Driver with Temperature Compensation

ZLED7001

Universal LED Driver with Temperature Compensation

Brief Description

ZLED7001 Features

The ZLED7001, one of our ZLED family of LED control ICs, is a peak current-mode control LED driver IC that is optimal for buck LED driver applications. The ZLED7001 operates in constant off-time mode. Capable of operating efficiently with voltage sources ranging from 8 VDC to 450 VDC or rectified 110 VAC/ 220 VAC, it is ideal for High Brightness (HB) LED applications. The ZLED7001 provides a PWM input for an external dimming control signal. The ZLED7001’s linear dimming input can be used both for linear dimming (0 to 240 mV) and temperature compensation of the LED current.

 Wide input range from 8 VDC to 450 VDC or 110 VAC/220 VAC  Temperature compensation to protect the LEDs and extend LED lifetime  Operates in constant off-time mode  Both PWM and linear dimming control signal inputs available  Very few external components needed for operation  Broad range of applications: outputs greater than 1A

Because the ZLED7001’s response time is limited only by the rate of change in the inductor current, it attains a high performance pulse-width modulation (PWM) dimming response. The ZLED7001 ensures proper output current regulation, without loop compensation, via peak current-mode operation.

Application Examples        

Line-powered replacement LED lighting Illuminated LED signs and other displays LED street and traffic lighting Constant-current source for general purposes Architecture / building LED lighting LED backlighting Line powered LED flood lighting Interior / exterior LED lighting

ZLED7001 Application Circuit 8 to 450 VDC VS

RIN

CLED

D1 8 1

CIN

ZLED7001

R1 C1

3 2

LD PWMD TOFF 7

R2 NTC

L1

VIN

VREF

n LED

GATE GND CS 4

COFF

Visit www.zmdi.com for more detailed information

Q1

5 6

RCS

70

ZLED7001

Universal LED Driver with Temperature Compensation

ZLED7001 Block Diagram

SOP-8 Package Dimensions (mm, except θ) A

1.550 ± 0.200

E

3.900 ± 0.100

A1

0.175 ± 0.075

E1

6.020 ± 0.220

A2

1.450 Typical

e

1.270 Typical

b

0.420 ± 0.070

L

0.835 ± 0.435

c

0.214 ± 0.036

θ

4° ± 4°

D

4.900 ± 0.100

Ordering Information Sales Code

71

Description

Package

ZLED7001-ZI1R

ZLED7001 – Universal LED Driver with Temperature Compensation

SOP8 (Tape & Reel)

ZLED7001Kit-E1

ZLED7001 Evaluation Board up to 24VAC / 40VDC, including 1 ZLED-PCB1

Kit

ZLED-PCB1

Test PCB with one 3W white HB-LED, cascadable to one multiple LED string

Printed Circuit Board

ZLED-PCB2

10 unpopulated test PCBs for modular LED string with footprints of 9 common HB-LED types

Printed Circuit Board

Sales and Further Information

www.zmdi.com

Zentrum Mikroelektronik Dresden AG (ZMD AG)

ZMD America, Inc.

Zentrum Mikroelektronik Dresden AG, Japan Office

ZMD FAR EAST, Ltd.

Grenzstrasse 28 01109 Dresden Germany

8413 Excelsior Drive Suite 200 Madison, WI 53717 USA

Phone +49 (0)351.8822.7.533 Fax +49(0)351.8822.8.7533

Phone Fax

Phone +81.3.6895.7410 Fax +81.3.6895.7301

Phone +886.2.2377.8189 Fax +886.2.2377.8199

+1 (608) 829-1987 +1 (631) 549-2882

2nd Floor, Shinbashi Tokyu Bldg.

4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan

LED_Drivers@zmdi.com 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

Global Corporate Catalog

DISCLAIMER: This information applies to a product under development. Its characteristics and specifications are subject to change without notice. Zentrum Mikroelektronik Dresden AG (ZMD AG) assumes no obligation regarding future manufacture unless otherwise agreed to in writing. The information furnished hereby is believed to be true and accurate. However, under no circumstances shall ZMD AG be liable to any customer, licensee, or any other third party for any special, indirect, incidental, or consequential damages of any kind or nature whatsoever arising out of or in any way related to the furnishing, performance, or use of this technical data. ZMD AG hereby expressly disclaims any liability of ZMD AG to any customer, licensee or any other third party, and any such customer, licensee and any other third party hereby waives any liability of ZMD AG for any damages in connection with or arising out of the furnishing, performance or use of this technical data, whether based on contract, warranty, tort (including negligence), strict liability, or otherwise.

Products available at ZMDI On-Line Store

© 2010 Zentrum Mikroelektronik Dresden AG — Rev. 1.1

ZLED7002

Toggle (Side-Step) Dual-Channel LED Driver

ZLED7002

Toggle (Side-Step) Dual-Channel LED Driver

Brief Description The ZLED7002 toggle (side-step) dual-channel LED driver is one of our ZLED family of LED control ICs. It operates in the lower DC voltage supply range of 2.7V to 5.5V. This unique LED driver is capable of controlling a MAIN channel and a SUB channel. Typically, only one of the two channels is active and the ZLED7002 toggles between the channels automatically in response to the voltage supply level and the related voltage at the UV (under-voltage protection) pin. A high-to-low transition of the power supply causes the output current to switch from the MAIN channel to the SUB channel if the UV pin voltage (VUV-PIN) is below the ZLED7002’s under-voltage threshold (VUVTHRSH=1.17V, typical). A low-to-high transition switches the output current from the SUB channel to the MAIN channel if the UV pin voltage is 80mV (typical) above the under-voltage threshold.

The MAIN channel is a configurable constant current source driving the MAIN LED string with a maximum current draw of 250mA. The MAIN LED channel current is set by an external resistor (R3) connected to the Iset pin. Alternately, the SUB channel is activated when the ZLED7002’s SUB pin is pulled to ground. Its current is determined by the forward voltage of the SUB LED and external components. The SUB channel can drive up to 100mA current through the LED channel when active.

The ZLED7002 enables voltage-level indicator applications and low-power battery-driven lighting applications that require switching to a lower-current LED channel when the supply is low, which extends the lighting lifetime. Because the dropout voltage (VDP) is minimal (as low as 0.1V when the MAIN channel output current is ~200mA), the ZLED7002 is optimal for battery-powered applications. Capable of operating efficiently with DC voltage supplies ranging from 2.7V to 5.5V, it is ideal for small portable lighting applications.

The ZLED7002 can also reduce bill-of-material costs because very few external components are required for most applications, making it an optimal fit for small devices for which lighting lifetime is critical. Only four resistors, a diode, and a capacitor are needed for a typical basic application.

Features • Automatic MAIN channel short-circuit protection switches the output current to the SUB channel if the MAIN LED is shorted • Under-voltage power supply detection • Over-temperature protection

Benefits • Extends lighting life-time by switching to a lowercurrent LED channel when the supply is low • 80mV (typical) hysteresis prevents unintended switching activation due to power supply ripple • Ultra low quiescent current: 250A typical • Very few external components needed for operation

Available Support • Evaluation Kit

Physical Characteristics • Voltage supply: 2.7V to 5.5V DC • Operating temperature: -25°C to 85°C • Small SOP8 package For additional information on our ZLED driver family, visit www.zmdi.com/products/led-drivers/

ZLED7002 Typical Application Circuit

© 2011 Zentrum Mikroelektronik Dresden AG — Rev. 3.0 All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.

The information furnished in this publication is subject to changes without notice.

Visit www.zmdi.com for more detailed information

72

ZLED7002

Toggle (Side-Step) Dual-Channel LED Driver

SOP8 Package Dimensions and Pin Assignments

Symbol

Dimension (mm, except θ) Min

Max

A

1.350

1.750

A1

0.100

0.250

A2

1.450 Typical

Typical Applications  Battery-driven LED lighting including • • • •

Helmet lighting Bicycle lighting Miner lamps Pocket lights

b

0.350

0.490

c

0.178

0.250

 Voltage-level indicators

D

4.800

5.000

E

3.800

4.000

 General purpose low-voltage industrial and consumer LED applications

E1

5.800

6.240

e

1.270 Typical

L

0.400

1.270

θ

0°

8°

Ordering Information

73

Product Sales Code

Description

Package

ZLED7002-ZI1R

ZLED7002 – Toggle (Side-Step) Dual-Channel LED Driver

SOP8 (Tape & Reel)

ZLED7002KIT-E1

ZLED7002 Evaluation Kit

Kit

Sales and Further Information

www.zmdi.com

Zentrum Mikroelektronik Dresden AG (ZMD AG)

ZMD America, Inc.

Zentrum Mikroelektronik Dresden AG, Japan Office

ZMD FAR EAST, Ltd.

Grenzstrasse 28 01109 Dresden Germany

8413 Excelsior Drive Suite 200 Madison, WI 53717 USA

Phone +49 (0)351.8822.7.533 Fax +49 (0)351.8822.8.7533

Phone Fax

Phone +81.3.6895.7410 Fax +81.3.6895.7301

Phone +886.2.2377.8189 Fax +886.2.2377.8199

+1 (608) 829-1987 +1 (631) 549-2882

2nd Floor, Shinbashi Tokyu Bldg.

4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan

LED_Drivers@zmdi.com 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

Global Corporate Catalog

DISCLAIMER: This information applies to a product under development. Its characteristics and specifications are subject to change without notice. Zentrum Mikroelektronik Dresden AG (ZMD AG) assumes no obligation regarding future manufacture unless otherwise agreed to in writing. The information furnished hereby is believed to be true and accurate. However, under no circumstances shall ZMD AG be liable to any customer, licensee, or any other third party for any special, indirect, incidental, or consequential damages of any kind or nature whatsoever arising out of or in any way related to the furnishing, performance, or use of this technical data. ZMD AG hereby expressly disclaims any liability of ZMD AG to any customer, licensee or any other third party, and any such customer, licensee and any other third party hereby waives any liability of ZMD AG for any damages in connection with or arising out of the furnishing, performance or use of this technical data, whether based on contract, warranty, tort (including negligence), strict liability, or otherwise.

Products available at ZMDI On-Line Store

ZLED7010

40V LED Driver with Temperature Compensation

ZLED7010

40V LED Driver with Remperature Compensation

Brief Description

Features  Capable of 95% efficiency*  Operates in continuous mode with a wide input range from 6 VDC to 40 VDC  Integrated 40V power switch  One-pin on/off or brightness control via DC voltage or PWM control signal  Switching frequency: ≤ 1MHz  Dimming rate: 1200:1 (typical)  Output current accuracy: 5% (typical)  Built-in temperature compensation and open-circuit protection for LEDs  Thermal shutdown protection for the ZLED7010  Very few external components needed for operation  Broad range of applications: outputs up to ≤750mA

The ZLED7010, one of our ZLED Family of LED control ICs, is an inductive step-down converter that is optimal for driving a single LED or multiple LEDs (connected in series) from a voltage source greater than the voltage rating of the LED. The ZLED7010 operates in continuous mode. Capable of operating efficiently with voltage supplies ranging from 6 VDC to 40 VDC, it is ideal for low-voltage lighting applications. The ZLED7010 minimizes current consumption by remaining in a low-current standby mode (output is off) until a voltage of ≥0.3V is applied to the ADJI pin.

In operating mode, the ZLED7010 can source LEDs with an output current of ≤ 750mA (≤ 30 watts of output power*) that is externally adjustable. The ZLED7010’s integrated output switch and high-side current sensing circuit use an external resistor to adjust the average output current. LED control is achieved via an external control signal at the ZLED7010’s ADJI pin, implemented as a pulse-width modulation (PWM) waveform for a gated output current or a DC voltage for continuous current.

 SOP-8 package

The ZLED7010 provides a temperature compensation function for maintaining stable and reliable LED operation. LED over-temperature conditions are detected via a negative temperature coefficient (NTC) thermistor mounted close to the LEDs. If an over-temperature condition occurs, the NTC value reaches the value of a threshold resistor and the IC reduces LED current automatically. After the circuit recovers to a safe temperature, current returns to the set value.

ADJO outputs and ADJI inputs of consecutive ICs can be interconnected as a driver chain deploying the temperature compensation information of the predecessor. This reduces the part count because only the first stage of the series requires an NTC. 6 to 40 VDC

Application Examples  Illuminated LED signs and other displays  LED traffic and street lighting (low-voltage)  Architectural LED lighting, including low-voltage applications for buildings  Halogen replacement LEDs (low-voltage)  LED flood-lighting  LED backlighting  General purpose exterior and interior LED lighting, including applications requiring low-voltage  General purpose low-voltage industrial applications

ZLED7010 Application Circuit RS

VS

D1

1

C1 4

1μF

3

C2 100nF

R2 50kΩ

6

RNTC RTH

ZLED7010

ADJI

Visit www.zmdi.com for more detailed information * See section 2.3 in the data-sheet for details

n LED

2

ISENSE

VIN

GND

LX

ADJO

8 5

R3 NTC

L1 47μH

7

74

ZLED7010

40V LED Driver with Temperature Compensation

SOP-8 Package Dimensions and Pin Assignments

Symbol A A1 A2 b c D

Dimension (mm) Min 1.350 0.100

Max 1.750 0.250 1.450 Typical

0.350 0.178 4.800

0.490 0.250 5.000

Symbol E E1 e L θ

Dimension (mm, except θ) Min Max 3.800 4.000 5.800 6.240 1.270 Typical 0.400 1.270 0° 8°

Ordering Information Product Sales Code

Description

Package

ZLED7010-ZI1R

ZLED7010 – 40V LED Driver with Temperature Compensation

SOP8 (Tape & Reel)

ZLED7010KIT-D1

ZLED7010 Demo Board with LED on Cool Body 12VAC/VDC

Kit

ZLED-PCB1

Test PCB with one 3W white HB-LED, cascadable to 1 multiple LED string

Printed Circuit Board

ZLED-PCB2

10 unpopulated test PCBs for modular LED string with footprints of 9 common HB-LED types

Printed Circuit Board

Sales and Further Information

www.zmdi.com

Zentrum Mikroelektronik Dresden AG (ZMD AG)

ZMD America, Inc.

Zentrum Mikroelektronik Dresden AG, Japan Office

ZMD Far East, Ltd.

Grenzstrasse 28 01109 Dresden Germany

8413 Excelsior Drive Suite 200 Madison, WI 53717 USA

Phone +49 (0)351.8822.7.533 Fax +49(0)351.8822.8.7533

Phone +1 (608) 829-1987 Fax +1 (631) 549-2882

Phone +81.3.6895.7410 Fax +81.3.6895.7301

Phone +886.2.2377.8189 Fax +886.2.2377.8199

LED_Drivers@zmdi.com

2nd Floor, Shinbashi Tokyu Bldg.

4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan

3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

DISCLAIMER: This information applies to a product under development. Its characteristics and specifications are subject to change without notice. Zentrum Mikroelektronik Dresden AG (ZMD AG) assumes no obligation regarding future manufacture unless otherwise agreed to in writing. The information furnished hereby is believed to be true and accurate. However, under no circumstances shall ZMD AG be liable to any customer, licensee, or any other third party for any special, indirect, incidental, or consequential damages of any kind or nature whatsoever arising out of or in any way related to the furnishing, performance, or use of this technical data. ZMD AG hereby expressly disclaims any liability of ZMD AG to any customer, licensee or any other third party, and any such customer, licensee and any other third party hereby waives any liability of ZMD AG for any damages in connection with or arising out of the furnishing, performance or use of this technical data, whether based on contract, warranty, tort (including negligence), strict liability, or otherwise.

Global Corporate Catalog

Products available at ZMDI On-Line Store

75 © 2010 Zentrum Mikroelektronik Dresden AG — Rev. 1.1

ZLED7012

Low-Voltage Four-Channel LED Driver

ZLED7012

Low-Voltage Four-Channel LED Driver

Brief Description

Benefits

 Current matching accuracy: ±0.9% (typical) The ZLED7012, one of our ZLED family of LED control ICs, is a low-noise, constant-frequency charge pump  One-pin on/off or brightness control for up to four DC/DC converter that can drive up to four LED LEDs via a simple PCC serial interface—no pulsechannels, providing a programmable constant current width modulation or additional control circuit needed level ranging from 1.8mA to 20mA per LED channel. It  14 programmable current levels for achieving realcan also drive higher current LEDs because its current ZLED7012 time control of effects such as LED fade-out or sinks can operate in parallel. It enables white or other Low-Voltage Four-Channel LED Driver changes in brightness sudden color LED applications that require uniform intensity and/or linear progressions in brightness. Capable of  Low EMI and back-injected noise because the operating efficiently with DC voltage supplies ranging charge pump is not inductor-based from 2.8V to 5.5V, it is ideal for small, battery-powered  Very few external components needed for operation Brief Description Benefits applications because very few external components are  Flexible design enables diverse LED ±0.9% applications: up  Current matching accuracy: (typical) The ZLED7012, one of our ZLED family of LED control needed: typically one small-dimension 1μF capacitor ICs, is a low-noise, constant-frequency charge pump  One-pin on/off or brightness control for up to four to 20mA per channel across the C+ and C- pins and two small-dimension DC/DC converter that can drive up to four LED LEDs via a simple PCC serial interface—no pulseproviding a programmable constant current width modulation additional control circuit needed 2.2μF capacitors to GND from the VCC andchannels, Vout pins.  LED driver family concept withorlow-voltage level ranging from 1.8mA to 20mA per LED channel. It  14 programmable current levels for achieving realcan also drive higher current LEDs because its current six-channel LED driver ZLED7022 The ZLED7012’s Pulse Count Control (PCC) serial digitime control of effects such as LED fade-out or sinks can operate in parallel. It enables white or other sudden changes in brightness tal input is used to enable/disable the LEDscolor and the that require uniform intensity LEDset applications linear progressions in brightness. Capable of  Low EMI and back-injected noise because the current level (14 settings using a nearlyand/or logarithmic operating efficiently with DC voltage supplies ranging charge pump is not inductor-based from 2.8V to 5.5V, battery-powered scale to provide a linear brightness progression).

Thisit is ideal for small,  Very few external components needed for operation Available Support applications because very few external components are simple, high-speed interface allows efficient  Flexible design enables diverse LED applications: up needed:real-time typically one small-dimension 1μF capacitor to 20mA per channel across C+ and C- pins and two small-dimension management of LEDs via microcontrollers orthecontrol Evaluation Kit 2.2μF capacitors to GND from the VCC and Vout pins.  LED driver family concept with low-voltage systems. six-channel LED driver ZLED7022 The ZLED7012’s Pulse Count Control (PCC) serial digital input is used to enable/disable the LEDs and set the The ZLED7012’s features include integrated soft-start current level (14 settings using a nearly logarithmic to provide a linear brightness progression). This circuitry to protect against excessive in-rushscale current durAvailable Support Physical Characteristics simple, high-speed interface allows efficient real-time ing power-on and a low-current shutdown mode that management of LEDs via microcontrollers or control  Evaluation Kit systems.  Voltage supply: 2.8V to 5.5V DC reduces quiescent current consumption to approximately The ZLED7012’s features include integrated soft-start 1μA (typical) by disconnecting the load from the input Operating -40°C to 85°C circuitry to protect against excessive  in-rush current dur- temperature: Physical Characteristics when the EN/SET pin is low for a specified time. ing power-on and a low-current shutdown mode that  toSmall footprint 12-pin UTQFN package  Voltage supply: 2.8V to 5.5V DC (2mm×2mm) reduces quiescent current consumption approximately

Features

1μA (typical) by disconnecting the load from the input when the EN/SET pin is low for a specified time.

 Operating temperature: -40°C to 85°C  Small footprint 12-pin UTQFN package (2mm×2mm)

Features

 Low quiescent current in low-current shutdown  Low quiescent current in low-current shutdown mode: 1μA typical; <2μA maximum mode: 1μA typical; <2μA maximum  Integrated thermal shutdown protection prevents  Integrated thermal shutdown protection prevents damage by shutting down the ZLED7012 if the die ZLED7012 Application Circuit temperature exceeds 160°C (typical) damage by shutting down the ZLED7012 ifjunction the die ZLED7012 Application Circuit  Fixed charge pump switching frequency: 1MHz (typ.) junction temperature exceeds 160°C (typical)  Soft-start feature protects against excessive inrush current during power-on  Fixed charge pump switching frequency: 1MHz (typ.)  Soft-start feature protects against excessive inrush current during power-on

© 2010 Zentrum Mikroelektronik Dresden AG - Rev. 1.0 All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.

The information furnished in this publication is subject to changes without notice.

Visit www.zmdi.com for more detailed information

76

ZLED7012

Low-Voltage Four-Channel LED Driver

Block Diagram

Typical Applications  LED backlighting for portable devices  LED lighting for cell phones, smartphones. PDAs  Illumination of digital photo frames  Backlighting for GPS / navigation systems  Low voltage LED lighting fixtures  General purpose low-voltage industrial and consumer applications

Ordering Information Product Sales Code

Description

Package

ZLED7012-ZI1R

ZLED7012 – Low-Voltage Four-Channel LED Driver

UTQFN12 (2x2)mm Tape & Reel

ZLED7012KIT-E1

ZLED7012 Evaluation Board

Kit

Sales and Further Information

www.zmdi.com

Zentrum Mikroelektronik Dresden AG (ZMD AG)

ZMD America, Inc.

Zentrum Mikroelektronik Dresden AG, Japan Office

ZMD FAR EAST, Ltd.

Grenzstrasse 28 01109 Dresden Germany

8413 Excelsior Drive Suite 200 Madison, WI 53717 USA

Phone +49 (0)351.8822.7.533 Fax +49 (0)351.8822.8.7533

Phone Fax

Phone +81.3.6895.7410 Fax +81.3.6895.7301

Phone +886.2.2377.8189 Fax +886.2.2377.8199

+1 (608) 829-1987 +1 (631) 549-2882

2nd Floor, Shinbashi Tokyu Bldg.

4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan

LED_Drivers@zmdi.com 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

Global Corporate Catalog

77

DISCLAIMER: This information applies to a product under development. Its characteristics and specifications are subject to change without notice. Zentrum Mikroelektronik Dresden AG (ZMD AG) assumes no obligation regarding future manufacture unless otherwise agreed to in writing. The information furnished hereby is believed to be true and accurate. However, under no circumstances shall ZMD AG be liable to any customer, licensee, or any other third party for any special, indirect, incidental, or consequential damages of any kind or nature whatsoever arising out of or in any way related to the furnishing, performance, or use of this technical data. ZMD AG hereby expressly disclaims any liability of ZMD AG to any customer, licensee or any other third party, and any such customer, licensee and any other third party hereby waives any liability of ZMD AG for any damages in connection with or arising out of the furnishing, performance or use of this technical data, whether based on contract, warranty, tort (including negligence), strict liability, or otherwise.

Products available at ZMDI On-Line Store

ZLED7015

1.0MHz Boost Converter with Internal 35V Switch ZLED7015 1.0MHz Boost Converter with Internal 35V Switch

Brief Description

Features

 Integrated 35V power switch The ZLED7015, ZLED7015 one of our ZLED family of LED control ICs, is a1.0MHz constant current boost converter  Wide input range: 6VDC to 30VDC Boost Converter with Internal 35V Switch with an internal high-power 35V switch. It is opti Over-temperature protection mal for driving multiple white LEDs connected in  Over-voltage (open LED string) protection adjusted series so that the LED current is uniform for better via external resistor divider brightness and color control. It can also drive  Under-voltage lockout ensures reliable circuit Brief Description Features devices that require a constant voltage and is operation  Integrated 35V power switch The ZLED7015, one of our ZLED family of LED capable of operating efficiently with voltage control ICs, is a constant current boost converter Control of output  Wide input range: 6VDCcurrent to 30VDCduring start-up via internal supplies ranging 6VDC to 30VDC. It is Itideal with from an internal high-power 35V switch. is opti Over-temperature “soft-start” protection mal forapplications driving multiple requiring white LEDs low connected for diverse lighting sup- in  Over-voltage LED string) protection adjusted Switching(open frequency: 1.0MHz series so that the LED current is uniform for better via external resistor divider ply voltages such as SELV applications.

Typically, brightness and color control. It can also drive Single pin lockout on/offensures or brightness control via PWM,  Under-voltage reliable circuit smaller, less expensive components devices that external require a constant voltage can and is operation microcontroller, or DC voltage control signal input of operating efficientlyat with voltage be used since capable the ZLED7015 switches 1.0MHz  Control of output current during start-up via internal  “soft-start” MSOP-10 package supplies ranging from 6VDC to 30VDC. It is ideal (typical). for diverse lighting applications requiring low sup Switching frequency: 1.0MHz

voltagescurrent such as SELV applications.via Typically, The ZLED7015plyoutput is adjustable an smaller, less expensive external components can connected from external current sense resistor R S be used since the ZLED7015 switches at 1.0MHz the FB pin to ground. (typical).

 Single pin on/off or brightness control via PWM, Benefits

microcontroller, or DC voltage control signal input

High efficiency:  MSOP-10 package

up to 95% efficiency  Few small, low-profile components needed for Benefits operation

ZLED7015 efficiency output current is adjustable via an The ZLED7015The improves and minimizes external current sense resistor RS connected from power losses in current setting resistor RS by the the FB pin to ground. use of an internal 0.3V feedback reference volThe ZLED7015 improves efficiency and minimizes tage. power losses in the current setting resistor RS by

 High efficiency: up to 95% efficiency  Small form-factor package  Few small, low-profile components needed for operation

 Small form-factor package Available Support

use of an internal 0.3V feedback reference vol-

Dimming can tage. be controlled using a pulse-width modulation (PWM) or ausing DC a voltage Dimmingwaveform can be controlled pulse-width modulation (PWM) waveform or a DC voltage applied to the FB pin.

Available Support  Evaluation Kit  Evaluation Kit

Physical Characteristics

applied to the FB pin.

Physical Characteristics

The ZLED7015 provides a “soft-start” function to The ZLED7015 provides a “soft-start” function to prevent excessive current on start-up andand preventin-rush excessive in-rush current on start-up ensures a controlled rise of the output voltage. ensures a controlled rise of the output voltage.

Operating temperature: -40°C  Operating temperature: -40°C to 85°C  RoHS-compliant RoHS-compliant

to 85°C

Over-voltage protection is adjustable via external

Over-voltage protection is Radjustable via external resistors R1 and 2. resistors R1 and R2.

ZLED7015 Typical Application Circuit VIN = 6 to 30 VDC Circuit ZLED7015 Typical Application L1

VIN = 6 to 30 VDC C1

CIN RVDD

CVDD

D1

REN

CIN

C1

VOUT

RVDD

REN

CVDD

EN

L1 EN

LX

VDD

OVP

ZLED7015

VDD

PGND

ZLED7015 PGND

VOUT

R1

FB

C2

D1 R21 R

COVP

AGND

FB

COUT

C2

LXVP

OVP

LED String

CVP

R2

LED String

RS

COVP

COUT

VP

AGND

C

R

VP S © 2011 Zentrum Mikroelektronik Dresden AG — Rev. 1.00 All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.

The information furnished in this publication is subject to changes without notice.

Visit www.zmdi.com for more detailed information

78

ZLED7015

1.0MHz Boost Converter with Internal 35V Switch

ZLED7015 Block Diagram 6 to 30 VDC VIN

L1 RVDD

CIN

ZLED7015

9

REN CVDD

C1

D1 2

LDO

C2

VP

VDD Bias & Reference

Bandgap

COUT

CVP

7 –

FB

10

R

+

LX

RS VREF

Oscillator

S

n LED

Ramp Gen 4

EN

Shutdown

∑

R1

Q

COVP

R2

Slope Compensation

RS Current Sense

OVP 6

Over-Voltage Protection

Thermal Protection

Current Limit

PGND

1

AGND

3, 5

Typical Applications  Low-Voltage Retro-fit Lighting

 Architectural/Building Lighting

 MR16 Lights

 Replacement Tubes

 SELV Lighting

 LED Backlighting

 Signage and Outdoor Lighting

 General Purpose Low-Voltage Industrial and Consumer Applications

Ordering Information Product Sales Code

Description

Package

ZLED7015-ZI1R

ZLED7015 – 1.0MHz Boost Converter with Internal 35V Switch

MSOP-10 (Tape & Reel)

ZLED7015KIT-E1

ZLED7015-E1 Evaluation Board, 1 ZLED-PCB10, and 5 ZLED7015 ICs

Kit

Sales and Further Information

www.zmdi.com

LED_Drivers@zmdi.com

Zentrum Mikroelektronik Dresden AG Grenzstrasse 28 01109 Dresden Germany

ZMD America, Inc. 275 South 5th Avenue Pocatello, ID 83201 USA

Zentrum Mikroelektronik Dresden AG, Japan Office 2nd Floor, Shinbashi Tokyu Bldg.

4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan

ZMD FAR EAST, Ltd. 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

Zentrum Mikroelektronik Dresden AG, Korean Office POSCO Centre Building West Tower, 11th Floor 892 Daechi, 4-Dong, Kangnam-Gu Seoul, 135-777 Korea

Phone +49.351.8822.7.533 Fax +49.351.8822.8.7533

Phone +1.208.478.7200 Fax +1.208.478.7200

Phone +81.3.6895.7410 Fax +81.3.6895.7301

Phone +886.2.2377.8189 Fax +886.2.2377.8199

Phone +82.2.559.0660 Fax +82.2.559.0700

Global Corporate Catalog

DISCLAIMER: This information applies to a product under development. Its characteristics and specifications are subject to change without notice. Zentrum Mikroelektronik Dresden AG (ZMD AG) assumes no obligation regarding future manufacture unless otherwise agreed to in writing. The information furnished hereby is believed to be true and accurate. However, under 79no circumstances shall ZMD AG be liable to any customer, licensee, or any other third party for any special, indirect, incidental, or consequential damages of any kind or nature whatsoever arising out of or in any way related to the furnishing, performance, or use of this technical data. ZMD AG hereby expressly disclaims any liability of ZMD AG to any customer, licensee or any other third party, and any such customer, licensee and any other third party hereby waives any liability of ZMD AG for any damages in connection with or arising out of the furnishing, performance or use of this technical data, whether based on contract, warranty, tort (including negligence), strict liability, or otherwise.

Products available at ZMDI On-Line Store

ZLED7020

High Current 40V LED Driver with Internal Switch

ZLED7x20

High Current 40V LED Driver with Internal Switch

Brief Description

Features

The ZLED7x20 continuous-mode inductive step• Up to 1.2A output current down converter family is part of our line of LED• Internal 40V power switch control ICs. It is designed for applications requiring • Wide DC input voltage range 6 to 40 VDC high brightness and high current. It can efficiently • Output current accuracy: 3% (typical) drive a single LED or multiple series-connected • Dimming ratio: 1200:1 LEDs from a voltage input higher than the LED for• LED open-circuit protection ward voltage: Vin = 6 to 40 VDC. It provides an ZLED7020 • Thermal shutdown protection adjustable output current 1.2A, which is set via an High Current 40V LED Driver with Internal Switch external resistor and controlled by the ZLED7x20’s integrated high-side output current-sensing circuit Benefits and high speed internal 40V power switch. An • High efficiency: up to 98% Brief Description external control signal, which can be Features a DC voltage, • Single pin on/off and brightness control using DC The ZLED7x20 continuous-mode inductive step•waveform, Up to 1.2A outputon current PWM, or microcontroller-generated down converter family is part of our line of LED• Internal 40V power switch voltage or PWM the ADJ canforalso be used adjust a control ICs. It ispin designed applications requiring to linearly • Wide DC input voltage range 6 to 40 VDC high brightness and high current.

It can efficiently • Very few external components needed for continuous output current or to control a gated out- 3% (typical) • Output current accuracy: drive a single LED or multiple series-connected • Dimming ratio: 1200:1 operation put current.

LEDs from a voltage input higher than the LED for• LED open-circuit protection ward voltage: Vin = 6 to 40 VDC. It provides an • Footprint compatible to our ZLED7000 depending • Thermal protection adjustable output current which is set an applying The output can 1.2A, be turned offviaby a shutdown voltage external resistor and controlled by the ZLED7x20’s on the application. lower than 0.2V to the ADJ pin, which puts the integrated high-side output current-sensing circuit and high speed internal 40V power switch. An external control signal, which can be a DC voltage, PWM, or microcontroller-generated waveform, on the ADJ pin can also be used to linearly adjust a continuous output current or to control a gated output current.

Benefits

ZLED7x20 in a low-current standby state.

• High efficiency: up to 98%

Available Support

• Single pin on/off and brightness control using DC

The ZLED7x20 enables diverse industrial voltage or PWMand • Very few external components needed for • Evaluation Kit consumer lighting applications requiring high operation driving currents, wide operating voltage range, • Footprint compatible to our ZLED7000 depending The output can be turned off by applying a voltage on thecontrol. application. It Physical Characteristics highthan efficiency, andpin,variable brightness lower 0.2V to the ADJ which puts the ZLED7x20 in a low-current standby state. offers over-temperature and LED open-circuit proAvailable Support • Operating temperature: -40°C to 105°C The ZLED7x20 enables diverse industrial and tection. lighting The applications ZLED7x20 can high also minimize bill-of• Evaluation Kit consumer requiring • Switching frequency: up to 1MHz driving currents, wide operating voltagevery range,few external commaterial costs because Physical Characteristics high efficiency, and variable brightness control. It ponents are required for mostpro-applications.

Only a offers over-temperature and LED open-circuit • Operating temperature: -40°C to 105°C tection. The ZLED7x20 can also minimize bill-ofZLED7x20 Family Selection Matrix resistor, a diode, an inductor, and three capacitors • Switching frequency: up to 1MHz material costs because very few external components are required for a most applications.

Onlyapplication. a are needed for typical basic Product Max. Current Output Package ZLED7x20 Family Selection Matrix resistor, a diode, an inductor, and three capacitors are needed for a typical basic application.

ZLED7x20 Typical Application Circuit

Product

Max. Current Output

ZLED7020

1.2A

ZLED7320

1.0A

ZLED7520

0.75A

ZLED7720 ZLED7x20 Typical Application Circuit

0.35A

Package ZLED7020

1.2A

SOT89-5

DFN-5 ZLED7320

1.0A

DFN-5

ZLED7520 DFN-5

0.75A

DFN-5

ZLED7720

0.35A

DFN-5

SOT89-5 DFN-5

For additional information on our ZLED driver family, visit www.zmdi.com/products/led-drivers/ © 2011 Zentrum Mikroelektronik Dresden AG — Rev. 1.2 All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.

The information furnished in this publication is subject to changes without notice.

Visit www.zmdi.com for more detailed information

80

For additional information on our ZLED driver

ZLED7020

High Current 40V LED Driver with Internal Switch

ZLED7x20 Block Diagram

Typical Applications  Illuminated LED signs and other displays

 Interior/exterior LED lighting

 LED street and traffic lighting (low voltage)

 MR16 LED spot lights

 Architecture/building LED lighting

 Retrofit LED lighting fixtures

 LED backlighting

 General purpose industrial and consumer LED applications

Ordering Information Product Sales Code Description

81

Package

ZLED7020-ZI1R

ZLED7020 – High Current (1200mA) 40V LED Driver with Internal Switch

SOT89-5 (Tape & Reel)

ZLED7320-ZI1R

ZLED7320 – High Current (1000mA) 40V LED Driver with Internal Switch

DFN-5 (Tape & Reel)

ZLED7520-ZI1R

ZLED7520 – High Current (750mA) 40V LED Driver with Internal Switch

DFN-5 (Tape & Reel)

ZLED7720-ZI1R

ZLED7720 – High Current (350mA) 40V LED Driver with Internal Switch

DFN-5 (Tape & Reel)

ZLED7020KIT-D1

ZLED7020-D1 Demo Board, 1 ZLED-PCB8 and 5 ZLED7020 ICs

Kit

ZLED-PCB8

Test PCB with one 5W white High Brightness (HB) LED, cascadable to one multiple LED string

Printed Circuit Board (PCB)

Sales and Further Information

www.zmdi.com

Zentrum Mikroelektronik Dresden AG (ZMD AG)

ZMD America, Inc.

Zentrum Mikroelektronik Dresden AG, Japan Office

ZMD FAR EAST, Ltd.

Grenzstrasse 28 01109 Dresden Germany

8413 Excelsior Drive Suite 200 Madison, WI 53717 USA

Phone +49 (0)351.8822.7.533 Fax +49 (0)351.8822.8.7533

Phone Fax

Phone +81.3.6895.7410 Fax +81.3.6895.7301

Phone +886.2.2377.8189 Fax +886.2.2377.8199

+1 (608) 829-1987 +1 (631) 549-2882

2nd Floor, Shinbashi Tokyu Bldg.

4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan

LED_Drivers@zmdi.com 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

Global Corporate Catalog

DISCLAIMER: This information applies to a product under development. Its characteristics and specifications are subject to change without notice. Zentrum Mikroelektronik Dresden AG (ZMD AG) assumes no obligation regarding future manufacture unless otherwise agreed to in writing. The information furnished hereby is believed to be true and accurate. However, under no circumstances shall ZMD AG be liable to any customer, licensee, or any other third party for any special, indirect, incidental, or consequential damages of any kind or nature whatsoever arising out of or in any way related to the furnishing, performance, or use of this technical data. ZMD AG hereby expressly disclaims any liability of ZMD AG to any customer, licensee or any other third party, and any such customer, licensee and any other third party hereby waives any liability of ZMD AG for any damages in connection with or arising out of the furnishing, performance or use of this technical data, whether based on contract, warranty, tort (including negligence), strict liability, or otherwise.

Products available at ZMDI On-Line Store

© 2011 Zentrum Mikroelektronik Dresden AG — Rev. 1.2

ZLED7022

Low-Voltage Six-Channel LED Driver

ZLED7022

Low-Voltage Six-Channel LED Driver

Brief Description

Benefits

 Current matching accuracy: ±0.9% (typical) The ZLED7022, one of our ZLED family of LED control ICs, is a low-noise, constant-frequency charge pump  One-pin on/off or brightness control for up to six DC/DC converter that can drive up to six LED channels, LEDs via a simple PCC serial interface—no pulseproviding a programmable constant current level ranging width modulation or additional control circuit needed from 1.8mA to 20mA per LED channel. It can also drive  14 programmable current levels for achieving realhigher current LEDs because its current sinks can time control of effects such as LED fade-out or operate in parallel. It enables white or other color LED ZLED7022 sudden changes in brightness applications that require uniform intensity and/or linear Low-Voltage Six-Channel LED Driver progressions in brightness. Capable of operating effi Low EMI and back-injected noise because the ciently with DC voltage supplies ranging from 2.8V to charge pump is not inductor-based 5.5V, it is ideal for small, battery-powered applications  Very few external components needed for operation because very few external components are needed: Brief Description Benefitsdiverse LED applications: up  Flexible design enables typically one small-dimension 1μF capacitor across the  Current matching accuracy: ±0.9% (typical) The ZLED7022, one of our ZLED family of LED control to 20mA per channel C+ and C- pins and two small-dimension 2.2μFICs,capaciis a low-noise, constant-frequency charge pump  One-pin on/off or brightness control for up to six DC/DC converter that can drive  up LED to six LED channels, tors to GND from the VCC and Vout pins. driver family concept LEDs via with a simplelow-voltage PCC serial interface—no pulseproviding a programmable constant current level ranging width modulation or additional control circuit needed from 1.8mA to 20mA per LED channel.

It can also drive LED driver ZLED7012 four-channel The ZLED7022’s Pulse Count Control (PCC) serial digi 14 programmable current levels for achieving realhigher current LEDs because its current sinks can time control of effects such as LED fade-out or tal input is used to enable/disable the LEDs and set inthe operate parallel. It enables white or other color LED sudden changes in brightness applications that require uniform intensity and/or linear current level (14 settings using a nearly logarithmic progressions in brightness. Capable of operating effi Low EMI and back-injected noise because the ciently with DC voltage supplies ranging from 2.8V to pump is not inductor-based scale to provide a linear brightness progression).

This Available Support charge 5.5V, it is ideal for small, battery-powered applications Very few external components needed for operation simple, high-speed interface allows efficient because real-time very few external components are needed:  Flexible design enables diverse LED applications: up one small-dimension 1μF capacitor across the management of LEDs via microcontrollers ortypically control  Evaluation Kit to 20mA per channel C+ and C- pins and two small-dimension 2.2μF capacitors to GND from the VCC and Vout pins.  LED driver family concept with low-voltage systems. four-channel LED driver ZLED7012 The ZLED7022’s Pulse Count Control (PCC) serial digiThe ZLED7022’s features include integrated tal soft-start input is used to enable/disable the LEDs and set the current level (14 settings using a nearly logarithmic circuitry to protect against excessive in-rush current scale to durprovide a linear brightness progression).

This Physical Characteristics Available Support simple, high-speed interface allows efficient real-time ing power-on and a low-current shutdown mode that management of LEDs via microcontrollers or control  Evaluation Kit  Voltage supply: 2.8V to 5.5V DC reduces quiescent current consumption to approximately systems.

The ZLED7022’s features include integrated soft-start 1μA (typical) by disconnecting the load from the input  Operating temperature: -40°C to 85°C circuitry to protect against excessive in-rush current durPhysical Characteristics when the EN/SET pin is low for a specified time.ing power-on and a low-current shutdown mode that  Small footprint 12-pin UTQFN (2mm×2mm)  Voltage supply: package 2.8V to 5.5V DC reduces quiescent current consumption to approximately 1μA (typical) by disconnecting the load from the input when the EN/SET pin is low for a specified time.

Features

 Operating temperature: -40°C to 85°C  Small footprint 12-pin UTQFN package (2mm×2mm)

Features

 Low quiescent current in low-current shutdown  Low quiescent current in low-current shutdown mode: 1μA typical; <2μA maximum mode: 1μA typical; <2μA maximum

 Integrated thermal shutdown protection prevents

 Integrated thermal shutdown protection prevents damage by shutting down the ZLED7022 if the die ZLED7022 Application Circuit 160°C (typical) damage by shutting down the ZLED7022 if thejunction die temperature exceeds ZLED7022 Application Circuit  Fixed charge pump switching frequency: 1MHz (typ.) junction temperature exceeds 160°C (typical) Soft-start feature protects against excessive current during power-on  Fixed charge pump switching frequency: 1MHzinrush (typ.)

1μF  Soft-start feature protects against excessive Cpump inrush current during power-on C+ C. to 5.5V 2.8V

1μF

VCC Cin

Cpump C+

2.2μF

Vout

ZLED7022

2.2μF

Cout

GND

C-

D0 D1

. to 5.5V 2.8V

VCC

1

2 Vout

n<=14

EN/SET

D2 D3 D4

Cin

2.2μF

ZLED7022

D5

Cout

2.2μF

© 2010 Zentrum Mikroelektronik Dresden AG - Rev. 1.0 All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.

The information furnished in this publication is subject to changes without notice.

GND

D0 EN/SET Visit www.zmdi.com 1 2 n<=14 for more detailed information

D1 D2 D3 D4 D5

82

ZLED7022

Low-Voltage Six-Channel LED Driver

Block Diagram

Typical Applications  LED backlighting for portable devices  LED lighting for cell phones, smartphones. PDAs  Illumination of digital photo frames  Backlighting for GPS / navigation systems  Low voltage LED lighting fixtures  General purpose low-voltage industrial and consumer applications

Ordering Information Product Sales Code

Description

Package

ZLED7022-ZI1R

ZLED7022 – Low-Voltage Six-Channel LED Driver

UTQFN12 (2x2)mm - Tape & Reel

ZLED7022KIT-E1

ZLED7022 Evaluation Board

Kit

Sales and Further Information

www.zmdi.com

Zentrum Mikroelektronik Dresden AG (ZMD AG)

ZMD America, Inc.

Zentrum Mikroelektronik Dresden AG, Japan Office

ZMD FAR EAST, Ltd.

Grenzstrasse 28 01109 Dresden Germany

8413 Excelsior Drive Suite 200 Madison, WI 53717 USA

Phone +49 (0)351.8822.7.533 Fax +49 (0)351.8822.8.7533

Phone Fax

Phone +81.3.6895.7410 Fax +81.3.6895.7301

Phone +886.2.2377.8189 Fax +886.2.2377.8199

+1 (608) 829-1987 +1 (631) 549-2882

2nd Floor, Shinbashi Tokyu Bldg.

4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan

LED_Drivers@zmdi.com 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

Global Corporate Catalog

83

DISCLAIMER: This information applies to a product under development. Its characteristics and specifications are subject to change without notice. Zentrum Mikroelektronik Dresden AG (ZMD AG) assumes no obligation regarding future manufacture unless otherwise agreed to in writing. The information furnished hereby is believed to be true and accurate. However, under no circumstances shall ZMD AG be liable to any customer, licensee, or any other third party for any special, indirect, incidental, or consequential damages of any kind or nature whatsoever arising out of or in any way related to the furnishing, performance, or use of this technical data. ZMD AG hereby expressly disclaims any liability of ZMD AG to any customer, licensee or any other third party, and any such customer, licensee and any other third party hereby waives any liability of ZMD AG for any damages in connection with or arising out of the furnishing, performance or use of this technical data, whether based on contract, warranty, tort (including negligence), strict liability, or otherwise.

Products available at ZMDI On-Line Store

ZLED7030

High Current 40V LED Driver with Switch Dimming

ZLED7x30

High Current 40V LED Driver with Switch Dimming

Brief Description

Features • Switch dimming with multiple levels The ZLED7x30 continuous-mode inductive step• Three modes for output level settings down converter family is one of our ZLED LED• Up to 1.2A output current control ICs. It is designed for applications requiring • Internal 40V power switch high brightness and high current. The ZLED7x30 can efficiently drive a single LED or multiple • Wide DC input voltage range 8.5 to 40 VDC series-connected LEDs from a voltage input higher • Output current accuracy: 5% (typical) than the LED forward voltage (Vin = 8.5 to • LED open-circuit protection 40VDC). It provides an adjustable output current ZLED7030 Thermal shutdown protection LED Driver with Switch Dimming (1.2A maximum), which is set via an external High Current•40V

resistor and controlled by the ZLED7x30’s Benefits integrated high-side output current-sensing circuit and high speed internal 40V power switch. Its low • High efficiency: up to 98%Features Brief Description conducting impedance ensures high system effi• Switch dimming with Very few external components needed formultiple levels The ZLED7x30 •continuous-mode inductive step• Three modes for output level settings ciency. down converter family is one of our ZLED LEDoperation • Up to 1.2A output current

control ICs. It is designed for applications requiring

The ZLED7x30 provides a switch dimming func• Internal 40V power switch high brightness •and high current.

Thedimming ZLED7x30 function Adds switch to existing can efficiently drive a single LED or multiple • Wide DC input voltage range 8.5 to 40 VDC tion. It detects external switch action to adjust outinstallation series-connected LEDs from a voltage input higher • Output current accuracy: 5% (typical) put current, allowing dimming functionality to bethan the LED forward voltage (Vin = 8.5 to • LED open-circuit protection 40VDC). It provides an adjustable output current achieved without changing the original lighting sys• Thermal shutdown protection Available (1.2A maximum), which is setSupport via an external resistor and controlled by the ZLED7x30’s tem circuitry.

Benefits integrated high-side output current-sensing • Evaluation Kit circuit and high speed internal 40V power switch. Its low The switch dimming is implemented in either two• High efficiency: up to 98% conducting impedance ensures high system effi• Very few external components needed for level mode or three-level mode. The output current ciency.

Physical Characteristics operation of every level and the total number of levels are The ZLED7x30 provides a switch dimming func• Adds switch dimming function to existing tion. It detects external switch action to adjust outinstallation • Operating temperature: -40°C to 105°C customer selected by setting the corresponding put current, allowing dimming functionality to be input conditions of DIM1 and DIM2 pin. achieved without•changing the original lighting sys- up toAvailable Switching frequency: 1MHz Support tem circuitry.

• Evaluation Kit • SOP-8 package The ZLED7x30 enables diverse industrial and The switch dimming is implemented in either twolevel mode or three-level mode.

The output current consumer lighting applications requiring high Physical Characteristics of every level and the total number of levels are driving currents, wide operating voltage range, • Operating temperature: -40°C to 105°C ZLED7x30 Family Selection Matrix customer selected by setting the corresponding input conditions of DIM1 and DIM2 pin.

• Switching frequency: up to 1MHz high efficiency, and variable brightness control. It Product Max. Current Output Package • SOP-8 package The ZLED7x30 enables diverse industrial and offers over-temperature and LED open-circuit consumer lighting applications requiring high driving currents,ZLED7030 wide operating voltage range,1.2A protection. The ZLED7x30 can also minimize billZLED7x30 SOP-8 Family Selection Matrix high efficiency, and variable brightness control. It Product Max. Current Output Package of-material costs because very few external offers over-temperature and LED open-circuit1.0A ZLED7330 SOP-8 ZLED7030 1.2A SOP-8 protection.

The ZLED7x30 can also minimize billcomponents are required for most applications. of-material costs because very few external ZLED7530 0.75A SOP-8 ZLED7330 1.0A SOP-8 Only a resistor, a diode, an inductor, and three components are required for most applications.

ZLED7530 0.75A SOP-8 Only a resistor, a diode, an inductor, and three capacitors are needed for a typical basic ZLED7730 0.35A SOP-8 capacitors are needed for a typical basic ZLED7730 0.35A SOP-8 application. application.

ZLED7x30 Typical Application Circuit For additional information

ZLED7x30 Typical Application Circuit

For additional information on our ZLED driver

on ZLED driver family,our visit www.zmdi.com/products/led-drivers/ family, visit www.zmdi.com/products/led-drivers/ 















    





    





    



 



     

 

   

© 2011 Zentrum Mikroelektronik Dresden AG — Rev. 1.2 All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.

The information furnished in this publication is subject to changes without notice.

 Visit www.zmdi.com for more detailed information











© 2011 Zentrum Mikroelektronik Dresden AG — Rev. 1.2 All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.

84

ZLED7030

High Current 40V LED Driver with Switch Dimming

ZLED7x30 Block Diagram 6 to 40 VDC

Rs

VS

D1 ISENSE

(C1)

C2

2

VCC

0.1µF

1

VIN VCC

SD

Power Supply, Oscillator and UnderVoltage Detection (UV)

(C3)

VDDA

n LED

VDDD 8

ISENSE VREF

VIN

UV

ISENSE And Driver

POR CLK SD

LX

Power MOS

L1 33µH to 220µH

DR

SD S

Analog Dim Logic

6

DIM1 DIM2

Dim Select

Shutdown

Trim

ZLED7x30

5

GND

7

Typical Applications  Illuminated LED signs and other displays

 Interior/exterior LED lighting

 LED street and traffic lighting (low voltage)

 MR16 LED spot lights

 Architecture/building LED lighting

 Retrofit LED lighting fixtures

 LED backlighting

 General purpose industrial and consumer LED applications

Ordering Information Product Sales Code Description

85

Package

ZLED7030-ZI1R

ZLED7030 – High Current (1200mA) 40V LED Driver with Switch Dimming

SOP-8 (Tape & Reel)

ZLED7330-ZI1R

ZLED7330 – High Current (1000mA) 40V LED Driver with Switch Dimming

SOP-8 (Tape & Reel)

ZLED7530-ZI1R

ZLED7530 – High Current (750mA) 40V LED Driver with Switch Dimming

SOP-8 (Tape & Reel)

ZLED7730-ZI1R

ZLED7730 – High Current (350mA) 40V LED Driver with Switch Dimming

SOP-8 (Tape & Reel)

ZLED7030KIT-D1

ZLED7030-D1 Demo Board, 1 ZLED-PCB8 and 5 ZLED7030 ICs

Kit

ZLED-PCB8

Test PCB with one 5W white High Brightness (HB) LED, cascadable to one multiple LED string

Printed Circuit Board (PCB)

Sales and Further Information

www.zmdi.com

Zentrum Mikroelektronik Dresden AG (ZMD AG)

ZMD America, Inc.

Zentrum Mikroelektronik Dresden AG, Japan Office

ZMD FAR EAST, Ltd.

Grenzstrasse 28 01109 Dresden Germany

8413 Excelsior Drive Suite 200 Madison, WI 53717 USA

Phone +49 (0)351.8822.7.533 Fax +49 (0)351.8822.8.7533

Phone Fax

Phone +81.3.6895.7410 Fax +81.3.6895.7301

Phone +886.2.2377.8189 Fax +886.2.2377.8199

+1 (608) 829-1987 +1 (631) 549-2882

2nd Floor, Shinbashi Tokyu Bldg.

4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan

LED_Drivers@zmdi.com 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

Global Corporate Catalog

DISCLAIMER: This information applies to a product under development. Its characteristics and specifications are subject to change without notice. Zentrum Mikroelektronik Dresden AG (ZMD AG) assumes no obligation regarding future manufacture unless otherwise agreed to in writing. The information furnished hereby is believed to be true and accurate. However, under no circumstances shall ZMD AG be liable to any customer, licensee, or any other third party for any special, indirect, incidental, or consequential damages of any kind or nature whatsoever arising out of or in any way related to the furnishing, performance, or use of this technical data. ZMD AG hereby expressly disclaims any liability of ZMD AG to any customer, licensee or any other third party, and any such customer, licensee and any other third party hereby waives any liability of ZMD AG for any damages in connection with or arising out of the furnishing, performance or use of this technical data, whether based on contract, warranty, tort (including negligence), strict liability, or otherwise.

Products available at ZMDI On-Line Store

ZSLS7025 Boost LED Driver

ZSLS7025 ZSLS7025 Boost LED Driver Boost LED Driver

Brief Description

Features

The ZSLS7025, one of our ZSLS Family of LED Brief Description control ICs, is a constant current boost converter The ZSLS7025, onehigh-brightness of our ZSLS Family of LED designed for driving LEDs. It is control is a multiple constant current boost connected converter optimal forICs, driving white LEDs designed high-brightness It isfor in series so for thatdriving the LED current is LEDs. uniform optimal for driving multiple white LEDs connected better brightness and color control. The wide input in series so that the LED current is uniform for range and high output current better brightness and color control.enables The widediverse input industrial, after-market automotive, and consumer range and high output current enables diverse lighting applications. industrial, after-market automotive, and consumer lighting applications.

The ZSLS7025 output current is adjustable via an The ZSLS7025 output current is adjustable an external current sense resistor and can via deliver external current sense resistor and can deliver stable constant output current from a few milliamps stable constant output current from a few milliamps up to 2A or higher. up to 2A or higher.

The The ZSLS7025 drives currentinto intothethe ZSLS7025 drivesaaconstant constant current load.load.

TheThe control loop features a pulse frequency control loop features a pulse frequency modulated (PFM) inherently modulated (PFM)architecture architecture that that isis inherently stable and does not need loop compensation. stable and does not need loop compensation.

ZSLS7025supports supports pulse-width pulse-width modulation The The ZSLS7025 modulation (PWM) or linear voltage dimming, which allows (PWM) or linear voltage dimming, which allows flexible control of the LED luminance. flexible control of the LED luminance.

The ZSLS7025 can operate in applications with a The wide ZSLS7025 can operate in applications input voltage range from 5V to 100V.with An a wideintegrated input voltage range protection from 5V (OVP) to 100V. over-voltage circuitAn protects over-voltage the system, protection even under no-load integrated (OVP) circuit conditions.

The over-voltage protection is protects the system, even under no-load and R . adjustable via external resistors R 1 2 conditions. The over-voltage protection is

adjustable via external resistors R1 and R2.

Wide application input voltage range: 5V to 100V



Features (Higher voltage supported. See section 2.1 in the sheet.)input voltage range: 5V to 100V Widedata application (Higher voltage supported.

See section in by theexternal  Constant current output limited 2.1 only datacomponent sheet.) selection Constant current output limited only by external  No loop compensation required component selection  loop Internal over-voltage protection No compensation required  Internal over-temperature Internal over-voltage protection protection



  

Internal over-temperature protection  Brightness control via PWM or DC voltage control signal control input via PWM or DC voltage control Brightness signal input package  SOP-8

 

SOP-8 package



Benefits Benefits  High efficiency: up to 95%  High efficiency: up to 95%  Minimum of materials  Minimum bill of bill materials  Small form-factor package  Small form-factor package

Available Support Available Support  Demonstration Kit

 Demonstration Kit

Physical Characteristics

Physical Characteristics

 Junction temperature: -40°C to 125°C  RoHS compliant  Junction temperature: -40°C to 125°C

 RoHS compliant For additional information on our LED driver family, visit www.zmdi.com/products/led-drivers/

For additional information on our LED driver family, visit www.zmdi.com/products/led-drivers/

ZSLS7025 Typical Application Circuit VIN =5 to 100 VDC

ZSLS7025 Typical Application Circuit

L1

VIN =5Cto VDC IN 100 RVDD CIN

ZSLS7025 VDD

RVDD

L1

GATE

D1 R1

Q1

COUT

CS TOFF ZSLS7025 ADJ

CVDD

VDD

GND

TOFF

CVDD

D1

RTOFF

ADJ GND

FB GATE

OVP

Q1

R1

LED String

COUT

CS FB

R2

RCS

LED String

RFB

OVP

RTOFF

Visit www.zmdi.com for more detailed information

RCS

R2

RFB

© 2012 Zentrum Mikroelektronik Dresden AG — Rev. 1.00 All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.

The information furnished in this publication is subject to changes without notice.

86

ZSLS7025 Boost LED Driver

ZSLS7025 Block Diagram 5 to 100 VDC VIN

L1 RVDD VDD CIN

Voltage Regulator Block

1

CVDD

D1

5V Clamp

ZSLS7025

Vref1 (1.0V) Vref2 (0.3V)

3

50k

Vref4

COUT

2 RTOFF

Vref4 (0.05V) + -

Vref1

+

Q1

Blanking 500ns

900k

S

n LED

R Q

100k

GATE -

5

+

FB

CS

-

UVLO

+

6

TOFF

Vref3 (0.25V)

VDD

ADJ

Current Mirror

Vref3

-

+

Vref2

POR

7 R1

OVP +

GND

Vref1

8

RCS

R2

RFB

4

Typical Applications  Retro-fit Lighting

 Architectural/Building Lighting

 MR16 Lights

 Replacement Tubes

 SELV Lighting

 LED Backlighting

 Signage and Outdoor Lighting

 General Purpose Low-Voltage Industrial and Consumer Applications

Ordering Information Product Sales Code

Description

Package

ZSLS7025-ZI1R

ZSLS7025 – Boost LED Driver

SOP-8 (Tape & Reel)

ZSLS7025KIT-D1

ZSLS7025PCB-D1 Demo Board, 1 ZLED-PCB10, and 5 ZSLS7025 ICs

Kit

Sales and Further Information Zentrum Mikroelektronik Dresden AG Grenzstrasse 28 01109 Dresden Germany

www.zmdi.com

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA

Phone +49 (0)351.8822.7.533 Phone +855-ASK-ZMDI Fax +49 (0)351.8822.8.7533 (+855.275.9634)

LED_Drivers@zmdi.com

Zentrum Mikroelektronik Dresden AG, Japan Office 2nd Floor, Shinbashi Tokyu Bldg.

4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan

ZMD FAR EAST, Ltd. 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

Zentrum Mikroelektronik Dresden AG, Korean Office POSCO Centre Building West Tower, 11th Floor 892 Daechi, 4-Dong, Kangnam-Gu Seoul, 135-777 Korea

Phone +81.3.6895.7410 Fax +81.3.6895.7301

Phone +886.2.2377.8189 Fax +886.2.2377.8199

Phone +82.2.559.0660 Fax +82.2.559.0700

Global Corporate Catalog

87

DISCLAIMER: This information applies to a product under development. Its characteristics and specifications are subject to change without notice. Zentrum Mikroelektronik Dresden AG (ZMD AG) assumes no obligation regarding future manufacture unless otherwise agreed to in writing. The information furnished hereby is believed to be true and accurate. However, under no circumstances shall ZMD AG be liable to any customer, licensee, or any other third party for any special, indirect, incidental, or consequential damages of any kind or nature whatsoever arising out of or in any way related to the furnishing, performance, or use of this technical data. ZMD AG hereby expressly disclaims any liability of ZMD AG to any customer, licensee or any other third party, and any such customer, licensee and any other third party hereby waives any liability of ZMD AG for any damages in connection with or arising out of the furnishing, performance or use of this technical data, whether based on contract, warranty, tort (including negligence), strict liability, or otherwise.

Products available at ZMDI On-Line Store

ZWIR4512

Secure Low-Power Wireless IPv6 Module

ZWIR4512

Secure Low-Power Wireless IPv6 Module

Brief Description The ZWIR4512 enables secure low-power wireless IPv6 communication for sensors and small devices.

ZMDI provides a user-programmable, royalty-free 6LoWPAN stack with mesh routing capability with the ZWIR4512. 6LoWPAN is an Internet Engineering Task Force (IETF) standard for building wireless, low-power IP-based sensor and device networks.

These networks can easily be integrated into existing IT infrastructure or operate autonomously.

Secure communication is provided by standardcompliant implementations of the Internet Protocol Security (IPSec) protocol suite and the Internet Key Exchange Protocol version 2 (IKEv2), which enable highly secure end-to-end communication, including over unsecure network nodes. ® The module is powered by an ARM Cortex™-M3 microcontroller* and provides a rich set of GPIO and peripheral interfaces. Up to 192 kB of flash and 32 kB of RAM are available for user applications. Different low power modes are provided to save energy in battery-operated devices. The modules provide superior radio properties without the need for complicated external RF design.

Hardware Features  License-free 868/915 MHz frequency bands ®

 ARM Cortex™-M3 32-bit microcontroller  Up to 192kB flash and up to 32kB RAM for user

applications

 Unique EUI64 address  4 (10) channels in EU (US) mode  19 (ZWIR4512AC1) or 21 (ZWIR4512AC2)





 

GPIOs with multiplexed peripheral functions:  2 x UART, SPI, 3 x ADC, 2 x DAC, 2 11 x PWM, USB, CAN, I C™ †, 8 x Timer  Several 5V tolerant I/Os available Low current consumption:  3.5 µA Standby Mode  13.5 mA Receive Mode  18.5 mA Transmit Mode @ 0 dBm Modulation schemes  BPSK (20 kBps EU, 40 kBps US)  O-QPSK (100 kBps EU, 250 kBps US) Receiver sensitivity: up to -110 dBm TX output power: up to 10 dBm (US Mode)

* ARM® and Cortex™ are trademarks of ARM, Ltd. † 2 I C™ is a trademark of NXP.

Firmware Features  Serial command interface with built-in security

and over-the-air update (OTAU) functionality

 Royalty-free library bundle for custom firmware  6LoWPAN communication library with mesh

routing capability  IPSec and IKEv2 security libraries  Over-the-air update library  Several peripheral libraries

Benefits  Uniquely simple programmability  Standard-compliant security solution  No need for external microcontroller  Plug-and-play integration into local and wide-area    

networks No RF design required 2D barcode label containing MAC address Superior radio propagation ETSI/FCC certified

Available Support  Development Kit  Programming guide and application notes  Ethernet, USB and UART gateways  Example programs demonstrating C-API usage

Physical Characteristics  Supply voltage: 2.0 V to 3.6 V  Operating temperature: -40 °C to +85 °C  30-pin edge-board contact package or

32-pin land grid array package

Typical ZWIR4512 Application Setup LAN Device

ZWIR4512 Sensor

ZWIR4512

ZWIR4512 Ethernet Gateway

Sensor Monitor

DSL Router

Ethernet

LAN Device

Sensor Monitor

Sensor

Internet

ZWIR4512 ZWIR4512 Sensor

LAN

Sensor Wireless Mesh Network

Internet Device

Sensor Monitor

WAN

For more information, contact ZMDI via wpan@zmdi.com.

© 2014 Zentrum Mikroelektronik Dresden AG — Rev. 1.10 — January 24, 2014. All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. The information furnished in this publication is subject to changes without notice.

Visit www.zmdi.com for more detailed information

88

ZWIR4512

Secure Low-Power Wireless IPv6 Module

Stack Architecture

Application Code

Application

IPv6

IPSec

6LoWPAN

Network Buffers

Mesh Routing

GPIO & Peripherals

ICMPv6

IKEv2

UART2

UDP

UART1

libZWIR45xx-6LoWPAN.a

IPSec Config. & Key Database

ARM® Cortex™-M3

OTA Update

HAL

libZWIR451x-OTAU.a libZWIR45xx-IPSec.a libZWIR45xx-IKEv2.a libZWIR4512.a libZWIR451x-UART1.a

IEEE 802.15.4 MAC libZWIR451x-UART2.a

Microcontroller

ADC DACDACADC UART

ARM® Cortex™-M3

USB CAN

ADC ADC PWM

ADC ADC TIM

I2C™

Reset

SPI

Thin MAC

Digital PHY

Analog Frontend

ADC ADC ADC

Supply

RF – Transceiver

RF-Ctrl

The ZWIR4512 serves as a universal secure radio communication module. Typical application examples include home and industry automation, health monitoring, smart metering / smart grid applications, and keyless entry systems.

Its very low current consumption makes the module suitable for battery-operated devices.

Hardware

RF

Applications

ZWIR4512 Block Diagram

IEEE 802.15.4 PHY

Boot

ZWIR 4502

IEEE 802.15.4 MAC

General Purpose & Peripheral IO

Ordering Information Product Sales Code

Description

Package

ZWIR4512AC1xA

Unprogrammed module for user application programs

30 pin SMT, 27.9 mm x 16.5 mm

ZWIR4512AC1xI

Preprogrammed module with serial command interface

30 pin SMT, 27.9 mm x 16.5 mm

ZWIR4512AC2xA

Unprogrammed module for user application programs

32 pin LGA, 23.1 mm x 15.1 mm

ZWIR4512AC2xI

Preprogrammed module with serial command interface

32 pin LGA, 23.1 mm x 15.1 mm

ZWIR4512-Devkit

Development Kit

Sales and Further Information

89

www.zmdi.com

wpan@zmdi.com

Zentrum Mikroelektronik Dresden AG Global Headquarters Grenzstrasse 28 01109 Dresden, Germany

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA

Central Office: Phone +49.351.8822.0 Fax +49.351.8822.600

USA Phone +855.275.9634 Phone +408.883.6310 Fax +408.883.6358

European Technical Support Phone +49.351.8822.7.772 Fax +49.351.8822.87.772

DISCLAIMER: This information applies to a product under development. Its characteristics and specifications are subject to change without notice.

Zentrum Mikroelektronik Dresden AG (ZMD AG) assumes no obligation regarding future manufacture unless otherwise agreed to in writing. The information furnished hereby is believed to be true and accurate. However, under no circumstances shall ZMD AG be liable to any customer, licensee, or any other third party for any special, indirect, incidental, or consequential damages of any kind or nature whatsoever arising out of or in any way related to the furnishing, performance, or use of this technical data. ZMD AG hereby expressly disclaims any liability of ZMD AG to any customer, licensee or any other third party, and any such customer, licensee and any other third party hereby waives any liability of ZMD AG for any damages in connection with or arising out of the furnishing, performance or use of this technical data, whether based on contract, warranty, tort (including negligence), strict liability, or otherwise.

European Sales (Stuttgart) Phone +49.711.674517.55 Fax +49.711.674517.87955

Zentrum Mikroelektronik Dresden AG, Japan Office 2nd Floor, Shinbashi Tokyu Bldg.

4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan

ZMD FAR EAST, Ltd. 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

Phone +81.3.6895.7410 Fax +81.3.6895.7301

Phone +886.2.2377.8189 Fax +886.2.2377.8199

Zentrum Mikroelektronik Dresden AG, Korea Office U-space 1 Building 11th Floor, Unit JA-1102 670 Sampyeong-dong Bundang-gu, Seongnam-si Gyeonggi-do, 463-400 Korea Phone +82.31.950.7679 Fax +82.504.841.3026

Global Corporate Catalog

Products available at ZMDI On-Line Store

© 2014 Zentrum Mikroelektronik Dresden AG — Rev. 1.10 — January 24, 2014 All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.

Power Management Power and Precision

ZMDI Smart Power Management Solutions Semiconductor Solutions for Tomorrowâ&#x20AC;&#x2DC;s Energy Efficiency Challenge

Smart Power Management Solutions from ZMDI Designers of today’s high performance systems face many challenges: competitive features, regulatory requirements, solution stability, aggressive time-tomarket, and quick migration to manufacturing. Often the power requirements of the system are not well understood in the early part of the design process and features that help improve overall system reliability are becoming key differentiators. Consequently power system designers need solutions that are high performance, easily optimized, fully-featured, easy to use, flexible, and reusable.

ZMDI’s smart power management chipsets provide designers with a complete range of high efficiency solutions to meet low, medium, and high power requirements. Configurability via hardware or software ensures optimum flexibility and reusability of your design. Our solutions offer optional communications for telemetry and fault reporting allowing easier implementation in smart managed systems to meet system reliability, energy efficiency, and regulatory requirements.

ZMDI’s digital smart power management ICs are supported by our easy-to-use PC-based Pink Power Designer™ design optimizer tool. A key advantage of this software and our true digital architecture is the ability to make real time trade-offs between performance, size, and cost. The software helps maintain your design investment as the resulting solution can be easily migrated to meet different power requirements.

Our team of expert technical support staff with extensive power management system design experience is available to help you at all stages from system design through to board layout.

ZMDI smart power management solutions – for tomorrow’s energy efficiency challenge

ZMDI’s smart power management ICs and extensive system expertise help you develop the optimal solution and minimize your time-to-market

Applications • Server and storage units • Industrial and high-end PCs • Telecommunications equipment and base stations • Network routers and switches • FPGAs Power • Wireless access points, cable modems and Precision • Set-top boxes

Global Corporate Catalog

91

Products available at ZMDI On-Line Store

Features

Single-Phase Digital PWM Controller

PMBus™ Monitoring and Configuration



3.3 or 5.5

ZSPM1000ZA1R

Single-Phase Digital PWM Controller

PMBus™ Monitoring and Configuration



3.3 or 5.5

ZSPM1005ZA1R

Single-Phase Digital PWM Controller

Pin-Strap Configuration



3.3 or 5.5

ZSPM1025AA1W

Single-Phase Digital PWM Controller

PMBus™ Monitoring and Configuration Optimized for Murata 25A Power Block



3.3 or 5.5

ZSPM1025CA1W

Single-Phase Digital PWM Controller

Pin-Strap Configuration Optimized for Murata 25A Power Block



3.3 or 5.5

ZSPM1025DA1W

Single-Phase Digital PWM Controller

Pin-Strap Configuration Optimized for Murata 25A Power Block



3.3 or 5.5

ZSPM1035AA1W

Single-Phase Digital PWM Controller

PMBus™ Monitoring and Configuration Optimized for Murata 35A Power Block



3.3 or 5.5

ZSPM1035CA1W

Single-Phase Digital PWM Controller

Pin-Strap Configuration Optimized for Murata 35A Power Block



3.3 or 5.5

ZSPM1035DA1W

Single-Phase Digital PWM Controller

Pin-Strap Configuration Optimized for Murata 35A Power Block



3.3 or 5.5

ZSPM1502ZA1W

Single-Phase Digital PWM Controller

Pin-Strap Configuration Preprogrammed Output Voltage and Current



3.3 or 5.5

ZSPM1512ZA1W

Single-Phase Digital PWM Controller

Pin-Strap Configuration Preprogrammed Output Voltage and Current



3.3 or 5.5

ZSPM1521ZA1W

Single-Phase Digital PWM Controller

Pin-Strap Configuration Preprogrammed Output Voltage and Current



3.3 or 5.5

ZSPM1530ZA1W

Single-Phase Digital PWM Controller

Pin-Strap Configuration Preprogrammed Output Voltage and Current



3.3 or 5.5

ZSPM1557ZA1W

Single-Phase Digital PWM Controller

Pin-Strap Configuration Preprogrammed Output Voltage and Current



3.3 or 5.5

PMBus™ Monitoring and Configuration



5.0

Pin-Strap Configuration



5.0

ZSPM2000ZA1R ZSPM2005ZA1R

Single-Phase Digital PWM Controller and Integrated MOSFET Driver Single-Phase Digital PWM Controller and Integrated MOSFET Driver

Vin (V)

external switch

Description

ZSPM1000ZI1R

internal switch

Part Number

Type

ZSPM9000AI1R

Integrated Power Stage

Intel® 4.0 DrMOS Integrated 5V LDO, Thermal Flag, Skip Mode



3.0 to 15.0

ZSPM9010ZA1R

Integrated Power Stage

Intel® 4.0 DrMOS Thermal Flag, Skip Mode



3.0 to 15.0

ZSPM9015ZI1R

Integrated Power Stage

Intel® 4.0 DrMOS Thermal Shutdown and Flag, Zero Curent Detect



4.5 to 25.0

ZSPM9060ZA1R

Integrated Power Stage

Intel® 4.0 DrMOS Thermal Flag, Skip Mode



3.0 to 16.0

ZSPM4011BA1Wxx

Analog DC-DC Regulator

Fixed and Variable Output Voltage Soft-Start, PWM and PFM Modes²



4.5 to 24.0

ZSPM4012BA1Wxx

Analog DC-DC Regulator

Fixed and Variable Output Voltage Soft-Start, PWM and PFM Modes²



4.5 to 24.0

ZSPM4013BA1Wxx

Analog DC-DC Regulator

Fixed and Variable Output Voltage Soft-Start, PWM and PFM Modes²



4.5 to 18.0

ZSPM4022AA1W06

Analog DC-DC Regulator



4.5 to 19.0

ZSPM4022AA1W09

Analog DC-DC Regulator



4.5 to 19.0

ZSPM4022AA1W12

Analog DC-DC Regulator



4.5 to 19.0

ZSPM4023AA1W06

Analog DC-DC Regulator



4.5 to 28.0

ZSPM4023AA1W09

Analog DC-DC Regulator



4.5 to 28.0

ZSPM4023AA1W12

Analog DC-DC Regulator



4.5 to 28.0

1. Note: Output of external power stage

Variable Output Voltage Soft-Start, PWM and PFM Modes² Variable Output Voltage Soft-Start, PWM and PFM Modes² Variable Output Voltage Soft-Start, PWM and PFM Modes² Variable Output Voltage Soft-Start, PWM and PFM Modes² Variable Output Voltage Soft-Start, PWM and PFM Modes² Variable Output Voltage Soft-Start, PWM and PFM Modes²

2. Note: PWM = Pulse-Width Modulation; PFM = Pulse-Frequency Modulation

1. Note: Output of external power stage 2. Note: PWM = Pulse-Width Modulation; PFM = Pulse-Frequency Modulation

Visit www.zmdi.com for more detailed information

92

Vout (V)

Iout (A)

Operating Frequency (kHz)

Ta (°C) * Tj (°C)

Efficiency

Output Voltage Accuracy

Package (mm x mm)

0.5 to 5.0

-¹

≤1000

-40 to 85

n/a

1%

QFN24 (4x4)

0.5 to 5.0¹

-¹

≤1000

-40 to 125

n/a

1%

QFN24 (4x4)

0.5 to 5.0¹

-¹

≤1000

-40 to 125

n/a

1%

QFN24 (4x4)

0.35 to 3.6¹

25¹

500

-40 to 125

n/a

1%

QFN24 (4x4)

0.62 to 1.20¹

25¹

500

-40 to 125

n/a

1%

QFN24 (4x4)

1.25 to 3.40¹

25¹

500

-40 to 125

n/a

1%

QFN24 (4x4)

0.35 to 3.6¹

35¹

500

-40 to 125

n/a

1%

QFN24 (4x4)

0.62 to 1.20¹

35¹

500

-40 to 125

n/a

1%

QFN24 (4x4)

1.25 to 3.40¹

35¹

500

-40 to 125

n/a

1%

QFN24 (4x4)

1.0¹

15¹

500

-40 to 125

n/a

1%

QFN24 (4x4)

1.2¹

20¹

500

-40 to 125

n/a

1%

QFN24 (4x4)

1.5¹

20¹

500

-40 to 125

n/a

1%

QFN24 (4x4)

1.8¹

20¹

500

-40 to 125

n/a

1%

QFN24 (4x4)

3.3¹

15¹

500

-40 to 125

n/a

1%

QFN24 (4x4)

0.5 to 5.0¹

-¹

≤1000

-40 to 105

n/a

1%

QFN28 (4x4)

0.5 to 5.0¹

-¹

≤1000

-40 to 105

n/a

1%

QFN28 (4x4)

0.5 to 5.0

50

≤1000

-40 to 125

93%

n/a

PQFN40 (6x6)

0.5 to 5.0

50

≤1000

-40 to 125

93%

n/a

PQFN40 (6x6)

0.5 to 5.0

35

≤1000

0 to 150*

93%

n/a

PQFN40 (6x6)

0.5 to 5.0

60

≤1000

-40 to 125

93%

n/a

PQFN40 (6x6)

0.9 to 5.5

1

1000

-40 to 125*

95%

2%

QFN16 (3x3)

0.9 to 5.5

2

1000

-40 to 125*

95%

2%

QFN16 (3x3)

0.9 to 5.5

3

1000

-40 to 125*

95%

2%

QFN16 (3x3)

0.8 to 5.5

6

600

-40 to 125*

95%

1%

QFN28 (5x6)

0.8 to 5.5

9

600

-40 to 125*

95%

1%

QFN28 (5x6)

0.8 to 5.5

12

600

-40 to 125*

95%

1%

QFN28 (5x6)

0.8 to 5.5

6

600

-40 to 125*

95%

1%

QFN28 (5x6)

0.8 to 5.5

9

600

-40 to 125*

95%

1%

QFN28 (5x6)

0.8 to 5.5

12

600

-40 to 125*

95%

1%

QFN28 (5x6)

Our worldclass customer support, easyto-use tools and system experience help you throughout the entire design process and beyond

Global Corporate Catalog

93

Products available at ZMDI On-Line Store

ZSPM1000

True Digital PWM Controller (Single-Phase, Single-Rail)

ZSPM1000

True Digital PWM Controller (Single-Phase, Single-Rail)

Brief Description

Benefits

The ZSPM1000 is a configurable true-digital singlephase PWM controller for high-current, non-isolated DC/DC supplies. It operates as a synchronous stepdown converter in a single-rail and single-phase configuration.



The ZSPM1000 integrates a digital control loop, optimized for maximum flexibility and stability, as well as load step and steady-state performance. In addition, a rich set of protection and monitoring functions is provided. On-chip, non-volatile memory (NVM) and 2 * an I C™ interface facilitate configuration.

The PC-based ZMDI’s Pink Power Designer™ provides a user-friendly and easy-to-use interface to the device for communication and configuration. It can guide the user through the design of the digital compensator and offers intuitive configuration methods for additional features, such as protection and sequencing.

Features  

 

   

Programmable digital control loop Advanced digital control techniques  Tru-sample Technology™  State-Law Control™ (SLC)  Sub-cycle Response™ (SCR) Improved transient response and noise immunity Protection features  Over-current protection  Over-voltage protection (VIN, VOUT)  Under-voltage protection (VIN, VOUT)  Overloaded startup  Restart and delay Support for SMOD and ZCD drivers Fuse-based NVM for improved reliability Operation from a single 5V or 3.3V supply Optional PMBus™ address selection without external resistors

* I2C™ is a registered trademark of NXP. ****Subject Subject to to product type.

   

Fast configurability and design flexibility Simplified design and integration Reduced component count through system level integration Simplified monitoring for system power and thermal management Higher energy efficiency across all output loading conditions

Available Support  

Evaluation Kit PC-based Pink Power Designer™

Physical Characteristics   

Operation temperature: -40°C to +125°C** VOUT max: 5V Lead free (RoHS compliant) 24-pin QFN package (4 mm x 4 mm)

ZSPM1000 Typical Application Diagram

For more information, contact ZMDI via SPM@zmdi.com.

© 2013 Zentrum Mikroelektronik Dresden AG — Rev. 1.41— April 24, 2013. All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. The information furnished in this publication is subject to changes without notice.

Visit www.zmdi.com for more detailed information

94

ZSPM1000

True Digital PWM Controller (Single-Phase, Single-Rail)

ZSPM1000 Block Diagram

Current Sensing ISNSP

Current Limiting

Average Current Sensing

ISNSN

Digital Control Loop VFBP

VFB

FLASH ADC

VFBN

Adaptive Digital Controller

PWM

PWM

LSE

DAC OC Detection

Sequencer

OV Detection DAC

Typical Applications  Telecom Switches

Bias Current Source

 Servers and Storage  Base Stations  Network Routers

Configurable Error Handler

OT Detection Vin OV/UV Detection

Int. Temp Sense

Vout UV Detection

TEMP ADDR0

HKADC

CPU Core

VIN

SCL

Clock Generation

SMBALERT

SMBus

SDA

CONTROL

GPIO0

ADCVREF

PGOOD

GPIO

1.8V Reg Analog

AVDD18

1.8V Reg Digital

VDD18

3.3V Reg

VDD33

NVM (OTP)

ADDR1

 Single-Rail/Single-Phase Supplies for Processors, ASICs, FPGAs, DSPs

VREFP

VDD50

 Industrial Applications

VREF

Ordering Information (See additional options in section 7 of the ZSPM1000 Data Sheet.)

Sales Code

Description

Package

ZSPM1000ZI1R 1

ZSPM1000 Lead-free QFN24 — Temperature range: -40°C to +85°C

Reel

ZSPM1000ZA1R 1

ZSPM1000 Lead-free QFN24 — Temperature range: -40°C to +125°C

Reel

ZSPM8000-KIT

Evaluation Kit for ZSPM1000 with PMBus™ Communication Interface and Pink Power Designer™ GUI

Kit

Sales and Further Information

www.zmdi.com

SPM@zmdi.com

Zentrum Mikroelektronik Dresden AG Global Headquarters Grenzstrasse 28 01109 Dresden, Germany

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA

Central Office: Phone +49.351.8822.0 Fax +49.351.8822.600

European Technical Support Phone +49.351.8822.7.772 Fax +49.351.8822.87.772

DISCLAIMER: This information applies to a product under development. Its characteristics and specifications are subject to change without notice.

Zentrum Mikroelektronik Dresden AG (ZMD AG) assumes no obligation regarding future manufacture unless otherwise agreed to in writing. The information furnished hereby is believed to be true and accurate. However, under no circumstances shall ZMD AG be liable to any customer, licensee, or any other third party for any special, indirect, incidental, or consequential damages of any kind or nature whatsoever arising out of or in any way related to the furnishing, performance, or use of this technical data. ZMD AG hereby expressly disclaims any liability of ZMD AG to any customer, licensee or any other third party, and any such customer, licensee and any other third party hereby waives any liability of ZMD AG for any damages in connection with or arising out of the furnishing, performance or use of this technical data, whether based on contract, warranty, tort (including negligence), strict liability, or otherwise.

European Sales (Stuttgart) Phone +49.711.674517.55 Fax +49.711.674517.87955

ZMD FAR EAST, Ltd. 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

USA Phone +855.275.9634

Zentrum Mikroelektronik Dresden AG, Japan Office 2nd Floor, Shinbashi Tokyu Bldg.

4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan

Phone +408.883.6310 Fax +408.883.6358

Phone +81.3.6895.7410 Fax +81.3.6895.7301

Phone +886.2.2377.8189 Fax +886.2.2377.8199

Zentrum Mikroelektronik Dresden AG, Korea Office U-space 1 Building 11th Floor, Unit JA-1102 670 Sampyeong-dong Bundang-gu, Seongnam-si Gyeonggi-do, 463-400 Korea Phone +82.31.950.7679 Fax +82.504.841.3026

© 2013 Zentrum Mikroelektronik Dresden AG — Rev. 1.41— April 24, 2013.

All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.

Global Corporate Catalog

95

Products available at ZMDI On-Line Store

ZSPM1005

True Digital PWM Controller (Single-Phase, Single-Rail)

ZSPM1005

True Digital PWM Controller (Single-Phase, Single-Rail)

Brief Description

Benefits

The ZSPM1005 is a configurable true-digital singlephase PWM controller for high-current, non-isolated DC/DC supplies. It operates as a synchronous stepdown converter in a single-rail and single-phase configuration.



The ZSPM1005 integrates a digital control loop, optimized for maximum flexibility and stability as well as load step and steady-state performance. In addition, a rich set of protection and monitoring functions is provided. To facilitate user configuration of the part, a set of configuration options can be pre-programmed in the ZSPM1005 that can be selected by setting the values of two external resistors.

ZMDI’s Pink Power Designer™; a PC-based, userfriendly interface to the ZSPM1005, can be used to expedite the design of the digital compensator. It offers intuitive configuration methods for additional features, such as protection and sequencing. Once the part is programmed, the resistor options can be used to select the required configuration without a digital bus.

Features  

 

   

Programmable digital control loop Advanced, digital control techniques  Tru-sample Technology™  State-Law Control™ (SLC)  Sub-cycle Response™ (SCR) Improved transient response and noise immunity Protection features  Over-current protection  Over-voltage protection (VIN, VOUT)  Under-voltage protection (VIN, VOUT)  Overloaded startup  Restart and delay Support for SMOD and ZCD drivers Fuse-based one-time programmable (OTP) nonvolatile memory for improved reliability Operation from a single 5V or 3.3V supply 2-pin configuration for compensation, output voltage, and more

   



Fast configuration and design flexibility improves time-to-market Simplified design and integration FPGA designer-friendly solution Highest power density with smallest footprint Pin-to-pin compatible with the ZSPM1000 PWM controller enabling point-of-load power module platform designs with or without digital communication Higher energy efficiency across all output loading conditions

Available Support  

Evaluation Kit PC-based Pink Power Designer™

Physical Characteristics   

Operation temperature: -40°C to +125°C VOUT max: 5V Lead free (RoHS compliant) 24-pin QFN package (4mm x 4mm)

ZSPM1005 Typical Application Diagram

For more information, contact ZMDI via SPM@zmdi.com. © 2013 Zentrum Mikroelektronik Dresden AG — Rev.1.00 — June 21, 2013. All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. The information furnished in this publication is subject to changes without notice.

Visit www.zmdi.com for more detailed information

96

ZSPM1005

True Digital PWM Controller (Single-Phase, Single-Rail)

ZSPM1005 Block Diagram Current Sensing ISNSP

Current Limiting

Average Current Sensing

ISNSN

Digital Control Loop VFBP

VFB

FLASH ADC

VFBN

Adaptive Digital Controller

PWM

PWM LSE

DAC OC Detection

Sequencer

OV Detection DAC

Bias Current Source

Configurable Error Handler

OT Detection Vin OV/UV Detection

Int. Temp Sense

Vout UV Detection

Optimal Applications TEMP CONFIG0

HKADC

VIN

1.8V Reg Analog

AVDD18

1.8V Reg Digital

VDD18

3.3V Reg

VDD33

GPIO3

VDD50

Clock Generation

GPIO2

GPIO1

CONTROL

GPIO

GPIO0

VREFP

NVM (OTP)

CPU Core

CONFIG1

ADCVREF

 Point-of-load power modules for single-phase applications including telecommunication, base stations, servers and storage

PGOOD

 FPGA designs

VREF

Ordering Information Product Sales Code ZSPM1005ZA1R 0

Description

Package

ZSPM1005 Lead-free QFN24 — Temperature range: -40°C to +125°C

Sales and Further Information

www.zmdi.com

Reel

SPM@zmdi.com

Zentrum Mikroelektronik Dresden AG Global Headquarters Grenzstrasse 28 01109 Dresden, Germany

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA

Central Office: Phone +49.351.8822.0 Fax +49.351.8822.600

USA Phone +855.275.9634 Phone +408.883.6310 Fax +408.883.6358

European Technical Support Phone +49.351.8822.7.772 Fax +49.351.8822.87.772

DISCLAIMER: This information applies to a product under development. Its characteristics and specifications are subject to change without notice.

Zentrum Mikroelektronik Dresden AG (ZMD AG) assumes no obligation regarding future manufacture unless otherwise agreed to in writing. The information furnished hereby is believed to be true and accurate. However, under no circumstances shall ZMD AG be liable to any customer, licensee, or any other third party for any special, indirect, incidental, or consequential damages of any kind or nature whatsoever arising out of or in any way related to the furnishing, performance, or use of this technical data. ZMD AG hereby expressly disclaims any liability of ZMD AG to any customer, licensee or any other third party, and any such customer, licensee and any other third party hereby waives any liability of ZMD AG for any damages in connection with or arising out of the furnishing, performance or use of this technical data, whether based on contract, warranty, tort (including negligence), strict liability, or otherwise.

European Sales (Stuttgart) Phone +49.711.674517.55 Fax +49.711.674517.87955

Zentrum Mikroelektronik Dresden AG, Japan Office 2nd Floor, Shinbashi Tokyu Bldg.

4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan

ZMD FAR EAST, Ltd. 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

Phone +81.3.6895.7410 Fax +81.3.6895.7301

Phone +886.2.2377.8189 Fax +886.2.2377.8199

Zentrum Mikroelektronik Dresden AG, Korea Office U-space 1 Building 11th Floor, Unit JA-1102 670 Sampyeong-dong Bundang-gu, Seongnam-si Gyeonggi-do, 463-400 Korea Phone +82.31.950.7679 Fax +82.504.841.3026

© 2013 Zentrum Mikroelektronik Dresden AG — Rev. 1.00 — June 21, 2013.

All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.

Global Corporate Catalog

97

Products available at ZMDI On-Line Store

ZSPM15xx Family ICs

Single-Phase Step-Down DC/DC Digital Controller

ZSPM15xx Family ICs

Single-Phase Step-Down DC/DC Digital Controller

Brief Description

Benefits

ZSPM15xx family ICs are single-phase step-down DC/DC digital controllers designed for high-current, non-isolated DC/DC supplies. The ZSPM15xx has a digital control loop, optimized for maximum stability as well as load step and steady-state performance.



It has a rich set of integrated fault protection features including over-voltage/under-voltage, output overcurrent, and over-temperature protections. To facilitate ease of use, the ZSPM15xx family is pre-programmed and available in common output voltage and current configurations.



ZSPM15xx family ICs have been optimized for maximum efficiency when used with ZMDI’s driver MOSFET chipset: ZSPM9015 or ZSPM9060. This enables a high performance turnkey solution without extensive engineering development.



ZSPM15xx

Max. Constant Current

Output Voltage

ZSPM1502

15A

1.0V

ZSPM1512

20A

1.2V

ZSPM1521

20A

1.5V

ZSPM1530

20A

1.8V

ZSPM1557

15A

3.3V

Features 

 

 

Advanced, digital control techniques  Tru-sample Technology™  State-Law Control™ (SLC)  Sub-cycle Response™ (SCR) Ultra-fast transient response and noise immunity Fault protection features  Over-current protection  Over-voltage protection (VIN, VOUT)  Under-voltage protection (VIN, VOUT)  Overloaded startup  Restart and delay Optimized to support ZSPM9015 or ZSPM9060 Driver MOSFET Chipset 2-pin configuration for output voltage rise time and compensation

  

Factory pre-configured for industry standard output voltages and currents enabling fast timeto-market Simplified design and integration FPGA designer-friendly solution Highest power density with smallest footprint Higher energy efficiency across all output loading conditions

Available Support Evaluation Kit

Physical Characteristics   

Operation temperature: -40°C to +125°C Operation from a single 5V or 3.3V supply Lead-free (RoHS compliant) 24-pin QFN package (4mm x 4mm)

ZSPM15xx Typical Application Diagram ZSPM15xx

QFN (4mm x 4mm)

ZSPM9015 or ZSPM9060

For more information, contact ZMDI via SPM@zmdi.com.

© 2014 Zentrum Mikroelektronik Dresden AG — Rev.1.10 — March 3, 2014. All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. The information furnished in this publication is subject to changes without notice.

Visit www.zmdi.com for more detailed information

98

ZSPM15xx Family ICs

Single-Phase Step-Down DC/DC Digital Controller

ZSPM15xx Block Diagram

Typical Applications  Servers and Storage  Network Routers  Telecommunications  Industrial Controls  FPGA Designs  Point-of-Load Power Modules

ZSPM15xx Ordering Information Product Code

Description

Package

ZSPM1502ZA1W0

ZSPM1502 lead-free QFN24; 15A output current; 1.0V output voltage; temperature: -40°C to +125°C

Reel

ZSPM1512ZA1W0

ZSPM1512 lead-free QFN24; 20A output current; 1.2V output voltage; temperature: -40°C to +125°C

Reel

ZSPM1521ZA1W0

ZSPM1521 lead-free QFN24; 20A output current; 1.5V output voltage; temperature: -40°C to +125°C

Reel

ZSPM1530ZA1W0

ZSPM1530 lead-free QFN24; 20A output current; 1.8V output voltage; temperature: -40°C to +125°C

Reel

ZSPM1557ZA1W0

ZSPM1557 lead-free QFN24; 15A output current; 3.3V output voltage; temperature: -40°C to +125°C

Reel

Sales and Further Information

www.zmdi.com

SPM@zmdi.com

Zentrum Mikroelektronik Dresden AG Global Headquarters Grenzstrasse 28 01109 Dresden, Germany

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA

Central Office: Phone +49.351.8822.0 Fax +49.351.8822.600

USA Phone +855.275.9634 Phone +408.883.6310 Fax +408.883.6358

European Technical Support Phone +49.351.8822.7.772 Fax +49.351.8822.87.772

DISCLAIMER: This information applies to a product under development. Its characteristics and specifications are subject to change without notice.

Zentrum Mikroelektronik Dresden AG (ZMD AG) assumes no obligation regarding future manufacture unless otherwise agreed to in writing. The information furnished hereby is believed to be true and accurate. However, under no circumstances shall ZMD AG be liable to any customer, licensee, or any other third party for any special, indirect, incidental, or consequential damages of any kind or nature whatsoever arising out of or in any way related to the furnishing, performance, or use of this technical data. ZMD AG hereby expressly disclaims any liability of ZMD AG to any customer, licensee or any other third party, and any such customer, licensee and any other third party hereby waives any liability of ZMD AG for any damages in connection with or arising out of the furnishing, performance or use of this technical data, whether based on contract, warranty, tort (including negligence), strict liability, or otherwise.

European Sales (Stuttgart) Phone +49.711.674517.55 Fax +49.711.674517.87955

Zentrum Mikroelektronik Dresden AG, Japan Office 2nd Floor, Shinbashi Tokyu Bldg.

4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan

ZMD FAR EAST, Ltd. 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

Phone +81.3.6895.7410 Fax +81.3.6895.7301

Phone +886.2.2377.8189 Fax +886.2.2377.8199

Zentrum Mikroelektronik Dresden AG, Korea Office U-space 1 Building 11th Floor, Unit JA-1102 670 Sampyeong-dong Bundang-gu, Seongnam-si Gyeonggi-do, 463-400 Korea Phone +82.31.950.7679 Fax +82.504.841.3026

Global Corporate Catalog

© 2014 Zentrum Mikroelektronik Dresden AG — Rev. 1.10 — March 3, 2014 All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.

99

Products available at ZMDI On-Line Store

ZSPM1025A

True Digital PWM Controller (Single-Phase, Single-Rail)

ZSPM1025A

True Digital PWM Controller (Single-Phase, Single-Rail)

Brief Description

Benefits

The ZSPM1025A is a flexible true-digital singlephase PWM controller optimally configured for use with the Murata Power Solutions 25A Power Block OKLP-X/25-W12-C in smart digital power solutions.



The ZSPM1025A integrates a digital control loop, optimized for maximum flexibility and stability, as well as load step and steady-state performance. In addition, a rich set of protection and monitoring functions is provided. On-chip, non-volatile memory 2 * (NVM) and an I C™ interface facilitate configuration.

ZMDI’s PC-based Pink Power Designer™ graphic user interface (GUI) provides a user-friendly and easy-to-use interface to the ZSPM1025A for communication, monitoring, and configuration of the protection and sequencing features.

A downloadable reference solution is available, including a graphical user interface, layout guidelines, bill of materials, and step-by-step instructions.

    



Available Support 

Features  

 

  

Programmable digital control loop Advanced digital control techniques  Tru-sample Technology™  State-Law Control™ (SLC)  Sub-cycle Response™ (SCR) Improved transient response and noise immunity Protection features  Over-current protection  Over-voltage protection (VIN, VOUT)  Under-voltage protection (VIN, VOUT)  Overloaded startup  Continuous retry (“hiccup”) mode for fault conditions Fuse-based NVM for improved reliability Operation from a single 5V or 3.3V supply Optional PMBus™ address selection without external resistors

Fast time-to-market using off-the-shelf, optimally configured controller and power block Fast configurability and design flexibility Simplified design flow and high reliability via proven system design solution Reduced component count through system level integration Simplified monitoring for system power and thermal management Pin-to-pin compatible with the ZSPM1025C and ZSPM1025D PWM controllers, enabling point-ofload platform designs with or without digital communication Higher energy efficiency across all output loading conditions

 

Evaluation Kit Reference Solution PC-based Pink Power Designer™ GUI

Physical Characteristics   

Operation temperature: -40°C to +125°C VOUT: 0.35V to 3.6V Lead free (RoHS compliant) 24-pin QFN package (4 mm x 4 mm)

ZSPM1025A Typical Application Diagram ZSPM1025 QFN 4x4 mm

Murata OKLP-X/25-W12-C

Current Sensing Digital Control Loop

Power Management (Sequencing, Protection,…)

Driver

Driver

Housekeeping and Communication 2

* I C™ is a registered trademark of NXP.

For more information, contact ZMDI via SPM@zmdi.com.

© 2014 Zentrum Mikroelektronik Dresden AG — Rev. 1.20— February 5, 2014. All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. The information furnished in this publication is subject to changes without notice.

Visit www.zmdi.com for more detailed information

100

ZSPM1025A

True Digital PWM Controller (Single-Phase, Single-Rail)

ZSPM1025A Block Diagram

Current Sensing ISNSP

Current Limiting

Average Current Sensing

ISNSN

Digital Control Loop VFBP

VFB

FLASH ADC

VFBN

Adaptive Digital Controller

PWM

PWM

LSE

DAC OC Detection

Sequencer

OV Detection DAC

Typical Applications Bias Current Source

 Telecom Switches  Servers and Storage  Base Stations

Configurable Error Handler

OT Detection Vin OV/UV Detection

Int. Temp Sense

Vout UV Detection

TEMP

 Network Routers

ADDR0

HKADC

CPU Core

VIN

1.8V Reg Analog

AVDD18

1.8V Reg Digital

VDD18

Clock Generation

3.3V Reg

VDD33

VDD50

SCL

SMBus

SDA

CONTROL

GPIO0

ADCVREF

PGOOD

GPIO

SMBALERT

 Single-Rail/Single-Phase Supplies for Processors, ASICs, FPGAs, DSPs

VREFP

NVM (OTP)

ADDR1

 Industrial Applications

VREF

Ordering Information Sales Code

Description

Package

ZSPM1025AA1W 1 ZSPM1025A Lead-free QFN24 — Temperature range: -40°C to +125°C ZSPM8025-KIT

Reel

Evaluation Kit for ZSPM1025A with PMBus™ Communication Interface — Pink Power Designer™ GUI for kit can be downloaded from the ZMDI web site at www.zmdi.com/zspm1025a

Sales and Further Information

www.zmdi.com

Kit

SPM@zmdi.com

Zentrum Mikroelektronik Dresden AG Global Headquarters Grenzstrasse 28 01109 Dresden, Germany

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA

Central Office: Phone +49.351.8822.0 Fax +49.351.8822.600

European Technical Support Phone +49.351.8822.7.772 Fax +49.351.8822.87.772

DISCLAIMER: This information applies to a product under development. Its characteristics and specifications are subject to change without notice.

Zentrum Mikroelektronik Dresden AG (ZMD AG) assumes no obligation regarding future manufacture unless otherwise agreed to in writing. The information furnished hereby is believed to be true and accurate. However, under no circumstances shall ZMD AG be liable to any customer, licensee, or any other third party for any special, indirect, incidental, or consequential damages of any kind or nature whatsoever arising out of or in any way related to the furnishing, performance, or use of this technical data. ZMD AG hereby expressly disclaims any liability of ZMD AG to any customer, licensee or any other third party, and any such customer, licensee and any other third party hereby waives any liability of ZMD AG for any damages in connection with or arising out of the furnishing, performance or use of this technical data, whether based on contract, warranty, tort (including negligence), strict liability, or otherwise.

European Sales (Stuttgart) Phone +49.711.674517.55 Fax +49.711.674517.87955

ZMD FAR EAST, Ltd. 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

USA Phone +855.275.9634

Zentrum Mikroelektronik Dresden AG, Japan Office 2nd Floor, Shinbashi Tokyu Bldg.

4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan

Phone +408.883.6310 Fax +408.883.6358

Phone +81.3.6895.7410 Fax +81.3.6895.7301

Phone +886.2.2377.8189 Fax +886.2.2377.8199

Zentrum Mikroelektronik Dresden AG, Korea Office U-space 1 Building th 11 Floor, Unit JA-1102 670 Sampyeong-dong Bundang-gu, Seongnam-si Gyeonggi-do, 463-400 Korea Phone +82.31.950.7679 Fax +82.504.841.3026

© 2014 Zentrum Mikroelektronik Dresden AG — Rev. 1.20— February 5, 2014.

All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.

Global Corporate Catalog

101

Products available at ZMDI On-Line Store

ZSPM1025C / ZSPM1025D

True Digital PWM Controller (Single-Phase, Single-Rail)

ZSPM1025C / ZSPM1025D

True Digital PWM Controller (Single-Phase, Single-Rail)

Brief Description

Benefits

The ZSPM1025C and ZSPM1025D are true-digital single-phase PWM controllers optimally configured for use with the Murata Power Solutions 25A Power Block OKLP-X/25 in smart digital power solutions.



The ZSPM1025C and ZSPM1025D integrate a digital control loop, optimized for maximum flexibility and stability as well as load step and steady-state performance. In addition, a rich set of protection functions is provided.



To simplify the system design, a set of optimized configuration options have been pre-programmed in the devices. These configurations can be selected by setting the values of two external resistors.

Reference solutions are available complete with layout recommendations, example circuit board layouts, complete bill of materials and more.

   



Available Support   

Features  

 

  

Application-optimized digital control loop Advanced, digital control techniques  Tru-sample Technology™  State-Law Control™ (SLC)  Sub-cycle Response™ (SCR) Improved transient response and noise immunity Protection features  Over-current protection  Over-voltage protection (VIN, VOUT)  Under-voltage protection (VIN, VOUT)  Overloaded startup  Continuous retry (“hiccup”) mode for fault conditions Pre-programmed for optimized use with Murata Power Solutions 25A Power Block OKLP-X/25 2-pin configuration for loop compensation, output voltage, and slew rate.

Operation from a single 5V or 3.3V supply

Fast time-to-market using off-the-shelf, optimally configured controller and power block Fast configuration and design flexibility Simplified design and integration FPGA designer-friendly solution Highest power density with smallest footprint Pin-to-pin compatible with the ZSPM1025A PWM controller enabling point-of-load platform designs with or without digital communication Higher energy efficiency across all output loading conditions

Evaluation Kit Reference Solutions PC-based Pink Power Designer™ Graphic User Interface (GUI)

Physical Characteristics    

Operation temperature: -40°C to +125°C ZSPM1025C VOUT: 0.62V to 1.20V ZSPM1025D VOUT: 1.25V to 3.40V Lead free (RoHS compliant) 24-pin QFN package (4mm x 4mm)

ZSPM1025C/D Typical Application Diagram ZSPM1025 QFN 4x4 mm

Murata OKLP-X/25-W12-C

Current Sensing Digital Control Loop

Power Management (Sequencing, Protection,…)

Driver

Driver

Housekeeping and Communication

For more information, contact ZMDI via SPM@zmdi.com. © 2013 Zentrum Mikroelektronik Dresden AG — Rev.1.00 — October 28, 2013. All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. The information furnished in this publication is subject to changes without notice.

Visit www.zmdi.com for more detailed information

102

ZSPM1025C / ZSPM1025D

True Digital PWM Controller (Single-Phase, Single-Rail)

ZSPM1025C/D Block Diagram

Current Sensing ISNSP

Average Current Sensing

ISNSN

Digital Control Loop VFB

VFBP

FLASH ADC

VFBN

Adaptive Digital Controller

PWM

PWM

LSE

DAC

Typical Applications

OC Detection

Sequencer

 Telecom Switches

OV Detection

 Servers and Storage

DAC

 Network Routers

Bias Current Source

 Industrial Applications

Configurable Error Handler

OT Detection

 Base Stations

Vin OV/UV Detection

Int. Temp Sense

Vout UV Detection

 FPGA Designs  Point-of-load power solutions

TEMP CONFIG0

HKADC

CPU Core

VIN

GPIO3

Clock Generation

GPIO2

GPIO1

CONTROL

GPIO0

PGOOD

GPIO

ADCVREF

1.8V Reg Analog

AVDD18

1.8V Reg Digital

VDD18

3.3V Reg

VDD33

VDD50

 Single-Rail/Single-Phase supplies for Processors, ASICs, DSP’s, etc.

VREFP

NVM (OTP)

CONFIG1

 Telecommunications

VREF

Ordering Information Sales Code

Description

Package

ZSPM1025CA1W 0

ZSPM1025C Lead-free QFN24 — Temperature range: -40°C to +125°C

7” Reel

ZSPM1025DA1W 0

ZSPM1025D Lead-free QFN24 — Temperature range: -40°C to +125°C

7” Reel

ZSPM8725-KIT

Evaluation Kit for ZSPM1025C with PMBus™ Communication Interface and Pink Power Designer™ GUI

Kit

ZSPM8825-KIT

Evaluation Kit for ZSPM1025D with PMBus™ Communication Interface and Pink Power Designer™ GUI

Kit

Sales and Further Information

www.zmdi.com

SPM@zmdi.com

Zentrum Mikroelektronik Dresden AG Global Headquarters Grenzstrasse 28 01109 Dresden, Germany

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA

Central Office: Phone +49.351.8822.0 Fax +49.351.8822.600

USA Phone +855.275.9634 Phone +408.883.6310 Fax +408.883.6358

European Technical Support Phone +49.351.8822.7.772 Fax +49.351.8822.87.772

DISCLAIMER: This information applies to a product under development. Its characteristics and specifications are subject to change without notice.

Zentrum Mikroelektronik Dresden AG (ZMD AG) assumes no obligation regarding future manufacture unless otherwise agreed to in writing. The information furnished hereby is believed to be true and accurate. However, under no circumstances shall ZMD AG be liable to any customer, licensee, or any other third party for any special, indirect, incidental, or consequential damages of any kind or nature whatsoever arising out of or in any way related to the furnishing, performance, or use of this technical data. ZMD AG hereby expressly disclaims any liability of ZMD AG to any customer, licensee or any other third party, and any such customer, licensee and any other third party hereby waives any liability of ZMD AG for any damages in connection with or arising out of the furnishing, performance or use of this technical data, whether based on contract, warranty, tort (including negligence), strict liability, or otherwise.

European Sales (Stuttgart) Phone +49.711.674517.55 Fax +49.711.674517.87955

Zentrum Mikroelektronik Dresden AG, Japan Office 2nd Floor, Shinbashi Tokyu Bldg.

4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan

ZMD FAR EAST, Ltd. 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

Phone +81.3.6895.7410 Fax +81.3.6895.7301

Phone +886.2.2377.8189 Fax +886.2.2377.8199

Zentrum Mikroelektronik Dresden AG, Korea Office U-space 1 Building 11th Floor, Unit JA-1102 670 Sampyeong-dong Bundang-gu, Seongnam-si Gyeonggi-do, 463-400 Korea Phone +82.31.950.7679 Fax +82.504.841.3026

Global Corporate Catalog

© 2013 Zentrum Mikroelektronik Dresden AG — Rev. 1.00 — October 28, 2013.

All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.

103

Products available at ZMDI On-Line Store

ZSPM1035A

True Digital PWM Controller (Single-Phase, Single-Rail)

ZSPM1035A

True Digital PWM Controller (Single-Phase, Single-Rail)

Brief Description

Benefits

The ZSPM1035A is a flexible true-digital singlephase PWM controller optimally configured for use with the Murata Power Solutions 35A Power Block OKLP-X/35-W12-C in smart digital power solutions.



The ZSPM1035A integrates a digital control loop, optimized for maximum flexibility and stability, as well as load step and steady-state performance. In addition, a rich set of protection and monitoring functions is provided. On-chip, non-volatile memory 2 * (NVM) and an I C™ interface facilitate configuration.

ZMDI’s PC-based Pink Power Designer™ graphic user interface (GUI) provides a user-friendly and easy-to-use interface to the ZSPM1035A for communication, monitoring, and configuration of the protection and sequencing features.

    



Fast time-to-market using off-the-shelf, optimally configured controller and power block Fast configurability and design flexibility Simplified design flow and high reliability via proven system design solution Reduced component count through system level integration Simplified monitoring for system power and thermal management Pin-to-pin compatible with the ZSPM1035C and ZSPM1035D PWM controllers enabling point-ofload platform designs with or without digital communication Higher energy efficiency across all output loading conditions

A downloadable reference solution is available, including a graphical user interface, layout guidelines, bill of materials, and step-by-step instructions.

Available Support

Features



 

 

  

Programmable digital control loop Advanced digital control techniques  Tru-sample Technology™  State-Law Control™ (SLC)  Sub-cycle Response™ (SCR) Improved transient response and noise immunity Protection features  Over-current protection  Over-voltage protection (VIN, VOUT)  Under-voltage protection (VIN, VOUT)  Overloaded startup  Continuous retry (“hiccup”) mode for fault conditions Fuse-based NVM for improved reliability Operation from a single 5V or 3.3V supply Optional PMBus™ address selection without external resistors

 

Evaluation Kit Reference Solution PC-based Pink Power Designer™ GUI

Physical Characteristics   

Operation temperature: -40°C to +125°C VOUT: 0.35V to 3.6V Lead free (RoHS compliant) 24-pin QFN package (4mm x 4mm)

ZSPM1035A Typical Application Diagram ZSPM1035 QFN 4x4 mm

Murata OKLP-X/35-W12-C

Current Sensing

VIN 12V typical

Digital Control Loop

Power Management (Sequencing, Protection,…)

Driver

Driver

VOUT

Housekeeping and Communication 2

* I C™ is a registered trademark of NXP.

For more information, contact ZMDI via SPM@zmdi.com.

© 2014 Zentrum Mikroelektronik Dresden AG — Rev. 1.10— February 5, 2014. All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. The information furnished in this publication is subject to changes without notice.

Visit www.zmdi.com for more detailed information

104

ZSPM1035A

True Digital PWM Controller (Single-Phase, Single-Rail)

ZSPM1035A Block Diagram

Current Sensing ISNSP

Current Limiting

Average Current Sensing

ISNSN

Digital Control Loop VFBP

VFB

FLASH ADC

VFBN

Adaptive Digital Controller

PWM

PWM

LSE

DAC OC Detection

Sequencer

OV Detection DAC

Typical Applications Bias Current Source

 Telecom Switches  Servers and Storage  Base Stations

Configurable Error Handler

OT Detection Vin OV/UV Detection

Int. Temp Sense

Vout UV Detection

TEMP

 Network Routers

ADDR0

HKADC

CPU Core

VIN

1.8V Reg Analog

AVDD18

1.8V Reg Digital

VDD18

Clock Generation

3.3V Reg

VDD33

VDD50

SCL

SMBus

SDA

CONTROL

GPIO0

ADCVREF

PGOOD

GPIO

SMBALERT

 Single-Rail/Single-Phase Supplies for Processors, ASICs, FPGAs, DSPs

VREFP

NVM (OTP)

ADDR1

 Industrial Applications

VREF

Ordering Information Sales Code

Description

Package

ZSPM1035AA1W 1 ZSPM1035A Lead-free QFN24 — Temperature range: -40°C to +125°C ZSPM8035-KIT

Reel

Evaluation Kit for ZSPM1035A with PMBus™ Communication Interface — Pink Power Designer™ GUI for kit can be downloaded from the ZMDI web site at www.zmdi.com/zspm1035a

Sales and Further Information

www.zmdi.com

Kit

SPM@zmdi.com

Zentrum Mikroelektronik Dresden AG Global Headquarters Grenzstrasse 28 01109 Dresden, Germany

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA

Central Office: Phone +49.351.8822.0 Fax +49.351.8822.600

European Technical Support Phone +49.351.8822.7.772 Fax +49.351.8822.87.772

DISCLAIMER: This information applies to a product under development. Its characteristics and specifications are subject to change without notice.

Zentrum Mikroelektronik Dresden AG (ZMD AG) assumes no obligation regarding future manufacture unless otherwise agreed to in writing. The information furnished hereby is believed to be true and accurate. However, under no circumstances shall ZMD AG be liable to any customer, licensee, or any other third party for any special, indirect, incidental, or consequential damages of any kind or nature whatsoever arising out of or in any way related to the furnishing, performance, or use of this technical data. ZMD AG hereby expressly disclaims any liability of ZMD AG to any customer, licensee or any other third party, and any such customer, licensee and any other third party hereby waives any liability of ZMD AG for any damages in connection with or arising out of the furnishing, performance or use of this technical data, whether based on contract, warranty, tort (including negligence), strict liability, or otherwise.

European Sales (Stuttgart) Phone +49.711.674517.55 Fax +49.711.674517.87955

ZMD FAR EAST, Ltd. 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

USA Phone +855.275.9634

Zentrum Mikroelektronik Dresden AG, Japan Office 2nd Floor, Shinbashi Tokyu Bldg.

4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan

Phone +408.883.6310 Fax +408.883.6358

Phone +81.3.6895.7410 Fax +81.3.6895.7301

Phone +886.2.2377.8189 Fax +886.2.2377.8199

Zentrum Mikroelektronik Dresden AG, Korea Office U-space 1 Building 11th Floor, Unit JA-1102 670 Sampyeong-dong Bundang-gu, Seongnam-si Gyeonggi-do, 463-400 Korea Phone +82.31.950.7679 Fax +82.504.841.3026

© 2014 Zentrum Mikroelektronik Dresden AG — Rev. 1.10— February 5, 2014 All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.

Global Corporate Catalog

105

Products available at ZMDI On-Line Store

ZSPM1035C / ZSPM1035D

True Digital PWM Controller (Single-Phase, Single-Rail)

ZSPM1035C / ZSPM1035D

True Digital PWM Controller (Single-Phase, Single-Rail)

Brief Description

Benefits

The ZSPM1035C and ZSPM1035D are true-digital single-phase PWM controllers optimally configured for use with the Murata Power Solutions 35A Power Block OKLP-X/35-W12-C in smart digital power solutions.



The ZSPM1035C and ZSPM1035D integrate a digital control loop, optimized for maximum flexibility and stability as well as load step and steady-state performance. In addition, a rich set of protection functions is provided.

To simplify the system design, a set of optimized configuration options have been pre-programmed in the devices. These configurations can be selected by setting the values of two external resistors.

Reference solutions are available complete with layout recommendations, example circuit board layouts, complete bill of materials and more.

    



Available Support   

Features  

 



 

Application-optimized digital control loop Advanced, digital control techniques  Tru-sample Technology™  State-Law Control™ (SLC)  Sub-cycle Response™ (SCR) Improved transient response and noise immunity Protection features  Over-current protection  Over-voltage protection (VIN, VOUT)  Under-voltage protection (VIN, VOUT)  Overloaded startup  Continuous retry (“hiccup”) mode for fault conditions Pre-programmed for optimized use with Murata Power Solutions 35A Power Block OKLP-X/35W12-C 2-pin configuration for loop compensation, output voltage, and slew rate.

Operation from a single 5V or 3.3V supply

Fast time-to-market using off-the-shelf, optimally configured controller and power block Fast configuration and design flexibility Simplified design and integration FPGA designer-friendly solution Highest power density with smallest footprint Pin-to-pin compatible with the ZSPM1035A PWM controller enabling point-of-load platform designs with or without digital communication Higher energy efficiency across all output loading conditions

Evaluation Kit Reference Solutions PC-based Pink Power Designer™ Graphic User Interface (GUI)

Physical Characteristics    

Operation temperature: -40°C to +125°C ZSPM1035C VOUT: 0.62V to 1.20V ZSPM1035D VOUT: 1.25V to 3.40V Lead free (RoHS compliant) 24-pin QFN package (4mm x 4mm)

ZSPM1035C/D Typical Application Diagram ZSPM1035 QFN 4x4 mm

Murata OKLP-X/35-W12-C

Current Sensing

VIN 12V typical

Digital Control Loop

Power Management (Sequencing, Protection,…)

Driver

Driver

VOUT

Housekeeping and Communication

For more information, contact ZMDI via SPM@zmdi.com. © 2013 Zentrum Mikroelektronik Dresden AG — Rev.1.00 — December 4, 2013. All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. The information furnished in this publication is subject to changes without notice.

Visit www.zmdi.com for more detailed information

106

ZSPM1035C / ZSPM1035D

True Digital PWM Controller (Single-Phase, Single-Rail)

ZSPM1025C/D Block Diagram

Current Sensing ISNSP

Average Current Sensing

ISNSN

Digital Control Loop VFB

VFBP

FLASH ADC

VFBN

Adaptive Digital Controller

PWM

PWM

LSE

DAC

Typical Applications

OC Detection

Sequencer

 Telecom Switches

OV Detection

 Servers and Storage

DAC

 Network Routers

Bias Current Source

 Industrial Applications

Configurable Error Handler

OT Detection

 Base Stations

Vin OV/UV Detection

Int. Temp Sense

Vout UV Detection

 FPGA Designs  Point-of-Load Power Solutions

TEMP CONFIG0

HKADC

CPU Core

VIN

GPIO3

Clock Generation

GPIO2

GPIO1

CONTROL

GPIO0

PGOOD

GPIO

ADCVREF

1.8V Reg Analog

AVDD18

1.8V Reg Digital

VDD18

3.3V Reg

VDD33

VDD50

 Single-Rail/Single-Phase Supplies for Processors, ASICs, DSPs, etc.

VREFP

NVM (OTP)

CONFIG1

 Telecommunications

VREF

Ordering Information Sales Code

Description

Package

ZSPM1035CA1W 0 ZSPM1035C Lead-free QFN24 — Temperature range: -40°C to +125°C

7” Reel

ZSPM1035DA1W 0 ZSPM1035D Lead-free QFN24 — Temperature range: -40°C to +125°C

7” Reel

ZSPM8735-KIT

Evaluation Kit for ZSPM1035C with PMBus™ Communication Interface *

Kit

ZSPM8835-KIT

Evaluation Kit for ZSPM1035D with PMBus™ Communication Interface *

Kit

* Pink Power Designer™ GUI for kit can be downloaded from the ZMDI web site at www.zmdi.com/zspm1035c or www.zmdi.com/zspm1035d.

Sales and Further Information

www.zmdi.com

SPM@zmdi.com

Zentrum Mikroelektronik Dresden AG Global Headquarters Grenzstrasse 28 01109 Dresden, Germany

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA

Central Office: Phone +49.351.8822.0 Fax +49.351.8822.600

USA Phone +855.275.9634 Phone +408.883.6310 Fax +408.883.6358

European Technical Support Phone +49.351.8822.7.772 Fax +49.351.8822.87.772

DISCLAIMER: This information applies to a product under development. Its characteristics and specifications are subject to change without notice.

Zentrum Mikroelektronik Dresden AG (ZMD AG) assumes no obligation regarding future manufacture unless otherwise agreed to in writing. The information furnished hereby is believed to be true and accurate. However, under no circumstances shall ZMD AG be liable to any customer, licensee, or any other third party for any special, indirect, incidental, or consequential damages of any kind or nature whatsoever arising out of or in any way related to the furnishing, performance, or use of this technical data. ZMD AG hereby expressly disclaims any liability of ZMD AG to any customer, licensee or any other third party, and any such customer, licensee and any other third party hereby waives any liability of ZMD AG for any damages in connection with or arising out of the furnishing, performance or use of this technical data, whether based on contract, warranty, tort (including negligence), strict liability, or otherwise.

European Sales (Stuttgart) Phone +49.711.674517.55 Fax +49.711.674517.87955

Zentrum Mikroelektronik Dresden AG, Japan Office 2nd Floor, Shinbashi Tokyu Bldg.

4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan

ZMD FAR EAST, Ltd. 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

Phone +81.3.6895.7410 Fax +81.3.6895.7301

Phone +886.2.2377.8189 Fax +886.2.2377.8199

Zentrum Mikroelektronik Dresden AG, Korea Office U-space 1 Building 11th Floor, Unit JA-1102 670 Sampyeong-dong Bundang-gu, Seongnam-si Gyeonggi-do, 463-400 Korea Phone +82.31.950.7679 Fax +82.504.841.3026

Global Corporate Catalog

© 2013 Zentrum Mikroelektronik Dresden AG — Rev. 1.00 — December 4, 2013.

All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.

107

Products available at ZMDI On-Line Store

ZSPM4011

High Efficiency 1A Synchronous Buck Converter

ZSPM4011

High Efficiency 1A Synchronous Buck Converter

Brief Description

Benefits

The ZSPM4011 is a DC/DC synchronous switching regulator with fully integrated power switches, internal compensation, and full fault protection.

The 1MHz switching frequency enables using small filter components, resulting in reduced board space and reduced bill-of-materials costs.

  

Available Support 

Physical Characteristics

The ZSPM4011 integrates a wide range of protection circuitry, including input supply undervoltage lockout, output voltage soft start, current limit, VOUT over-voltage, and thermal shutdown.



The ZSPM4011 includes supervisory reporting through the PG (Power Good) open drain output to interface other components in the system.



Features



 

     

ZSPM4012/ZSPM4013: 2A/3A synchronous buck converters, available with adjustable output from 0.9 to 5V or fixed output voltages at 1.5V, 1.8V, 2.5V, 3.3V, 5.0V(16-pin 3x3 QFN) ZSPM1000: >5A single-phase, single-rail, true digital PWM controller (24-lead 4x4mm QFN)

ZSPM4011 Application Circuits Adjustable Output VCC

BST VCC VSW

EN

EN

ZSPM4011

CBYPASS

PGND



Related ZMDI Products

CBST VOUT

LOUT

RTOP

COUT

RBOT FB VOUT 10 kΩ (optional)

PG

PG

Fixed Output VCC

BST

VCC

CBYPASS

EN

EN

PGND





GND



Output voltage options depending on order code:  Fixed output voltages: 1.5V, 1.8V, 2.5V, 3.3V, or 5V with +/- 2% output tolerance  Adjustable output voltage range: 0.9V to 5V with +/- 1.5% reference Wide input voltage range: 6V to 24V 1MHz +/- 10% fixed switching frequency 1A continuous output current High efficiency – up to 95% Current mode PWM control with pulsefrequency modulation (PFM) mode for improved light load efficiency Voltage supervisor for VOUT reported at the PG pin Input supply under voltage lockout Soft start for controlled startup with no overshoot Full protection for over-current, overtemperature, and VOUT over-voltage Less than 10µA in Disabled Mode Low external component count

Junction operating temperature -40°C to 125°C Packaged in a 16pin QFN (3x3mm)

GND



Evaluation Kit Documentation



ZSPM4011

The ZSPM4011 utilizes current mode feedback in normal regulation pulse-width modulation (PWM) mode. When the regulator is disabled (EN pin is low), the ZSPM4011 draws less than 10µA quiescent current.

Increased battery life Minimal external component count (3 capacitors, 1 inductor) Inherent fault protection and reporting

VSW

CBST VOUT

LOUT COUT

FB VOUT

10kΩ (optional) PG

PG

For more information, contact ZMDI via analog@zmdi.com.

Visit www.zmdi.com for more detailed information

© 2012 Zentrum Mikroelektronik Dresden AG — Rev.1.03 — September 21, 2012. All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. The information furnished in this publication is subject to changes without notice.

108

ZSPM4011

High Efficiency 1A Synchronous Buck Converter

ZSPM4011 Block Diagram

PG

EN

VCC 4.2V

VCC VCC

Under-Voltage Protection

MONITOR & CONTROL

Over-Voltage Protection

Oscillator

Typical Applications    



Error Amp Compensation Network

BST

Over Current Protection

VCC



CBST

Gate Drive Control

Wireless access points, cable modems Set-top boxes DVD, LCD, LED supplies Portable products, including GPS, smart phones, tablet PCs Printers

Bootstrap Voltage

Thermal Protection

Ramp Generator

Vref & Soft Start

VCC

FB

Comparator

Gate Drive

VSW

VOUT

LOUT

COUT

Gate Drive

PGND

Vref

RTOP

FB

PFM Mode Comparator

RBOT

GND

Ordering Information Ordering Code

Description

Package

ZSPM4011AA1W00

ZSPM4011, 1A Synchronous Buck Converter: adjustable output, 0.9V to 5V, 16-pin 3x3mm QFN ZSPM4011, 1A Synchronous Buck Converter: fixed output, 1.5V,16-pin 3x3mm QFN ZSPM4011, 1A Synchronous Buck Converter: fixed output, 1.8V,16-pin 3x3mm QFN ZSPM4011, 1A Synchronous Buck Converter: fixed output, 2.5V,16-pin 3x3mm QFN ZSPM4011, 1A Synchronous Buck Converter: fixed output, 3.3V,16-pin 3x3mm QFN ZSPM4011, 1A Synchronous Buck Converter: fixed output, 5.0V,16-pin 3x3mm QFN ZSPM4011KIT, Evaluation Kit for 1A Synchronous Buck Converter

7” reel with 1000 ICs

ZSPM4011AA1W15 ZSPM4011AA1W18 ZSPM4011AA1W25 ZSPM4011AA1W33 ZSPM4011AA1W50 ZSPM4011KIT

Sales and Further Information

www.zmdi.com

7” reel with 1000 ICs 7” reel with 1000 ICs 7” reel with 1000 ICs 7” reel with 1000 ICs 7” reel with 1000 ICs Kit

analog@zmdi.com

Zentrum Mikroelektronik Dresden AG Grenzstrasse 28 01109 Dresden Germany

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA

Zentrum Mikroelektronik Dresden AG, Japan Office 2nd Floor, Shinbashi Tokyu Bldg.

4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan

ZMD FAR EAST, Ltd. 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

Zentrum Mikroelektronik Dresden AG, Korean Office POSCO Centre Building West Tower, 11th Floor 892 Daechi, 4-Dong, Kangnam-Gu Seoul, 135-777 Korea

Phone +49.351.8822.7.776 Fax +49.351.8822.8.7776

Phone 855-ASK-ZMDI (855-275-9634)

Phone +81.3.6895.7410 Fax +81.3.6895.7301

Phone +886.2.2377.8189 Fax +886.2.2377.8199

Phone +82.2.559.0660 Fax +82.2.559.0700

DISCLAIMER: This information applies to a product under development. Its characteristics and specifications are subject to change without notice. Zentrum Mikroelektronik Dresden AG (ZMD AG) assumes no obligation regarding future manufacture unless otherwise agreed to in writing. The information furnished hereby is believed to be true and accurate. However, under no circumstances shall ZMD AG be liable to any customer, licensee, or any other third party for any special, indirect, incidental, or consequential damages of any kind or nature whatsoever arising out of or in any way related to the furnishing, performance, or use of this technical data. ZMD AG hereby expressly disclaims any liability of ZMD AG to any customer, licensee or any other third party, and any such customer, licensee and any other third party hereby waives any liability of ZMD AG for any damages in connection with or arising out of the furnishing, performance or use of this technical data, whether based on contract, warranty, tort (including negligence), strict liability, or otherwise.

© 2012 Zentrum Mikroelektronik Dresden AG — Rev.1.03— September 21, 2012.

All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.

Global Corporate Catalog

109

Products available at ZMDI On-Line Store

ZSPM4012

High Efficiency 2A Synchronous Buck Converter

ZSPM4012

High Efficiency 2A Synchronous Buck Converter

Brief Description

Benefits

The ZSPM4012 is a DC/DC synchronous switching regulator with fully integrated power switches, internal compensation, and full fault protection.

The 1MHz switching frequency enables using small filter components, resulting in reduced board space and reduced bill-of-materials costs.

  

Available Support 

Physical Characteristics

The ZSPM4012 integrates a wide range of protection circuitry, including input supply undervoltage lockout, output voltage soft start, current limit, VOUT over-voltage, and thermal shutdown.



The ZSPM4012 includes supervisory reporting through the PG (Power Good) open drain output to interface other components in the system.



Features



 

     

ZSPM4011/ZSPM4013: 1A/3A synchronous buck converters, available with adjustable output from 0.9 to 5V or fixed output voltages at 1.5V, 1.8V, 2.5V, 3.3V, 5.0V (16-pin 3x3 QFN) ZSPM1000: >5A single-phase, single-rail, true digital PWM controller (24-pin 4x4mm QFN)

ZSPM4012 Application Circuits Adjustable Output VCC

BST VCC VSW

EN

EN

ZSPM4012

CBYPASS

PGND



Related ZMDI Products

CBST VOUT

LOUT

RTOP

COUT

RBOT FB VOUT 10 kΩ (optional)

PG

PG

Fixed Output VCC

BST

VCC

CBYPASS

EN

EN

PGND





GND



Output voltage options depending on order code:  Fixed output voltages: 1.5V, 1.8V, 2.5V, 3.3V, or 5V with +/- 2% output tolerance  Adjustable output voltage range: 0.9V to 5V with +/- 1.5% reference Wide input voltage range: 6V to 24V 1MHz +/- 10% fixed switching frequency 2A continuous output current High efficiency – up to 95% Current mode PWM control with pulsefrequency modulation (PFM) mode for improved light load efficiency Voltage supervisor for VOUT reported at the PG pin Input supply under voltage lockout Soft start for controlled startup with no overshoot Full protection for over-current, overtemperature, and VOUT over-voltage Less than 10µA in Disabled Mode Low external component count

Junction operating temperature -40°C to 125°C Packaged in a 16pin QFN (3x3mm)

GND



Evaluation Kit Documentation



ZSPM4012

The ZSPM4012 utilizes current mode feedback in normal regulation pulse-width modulation (PWM) mode. When the regulator is disabled (EN pin is low), the ZSPM4012 draws less than 10µA quiescent current.

Increased battery life Minimal external component count (3 capacitors, 1 inductor) Inherent fault protection and reporting

VSW

CBST VOUT

LOUT COUT

FB VOUT

10kΩ (optional) PG

PG

For more information, contact ZMDI via analog@zmdi.com.

Visit www.zmdi.com for more detailed information

© 2012 Zentrum Mikroelektronik Dresden AG — Rev.1.03 — September 21, 2012. All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. The information furnished in this publication is subject to changes without notice.

110

ZSPM4012

High Efficiency 2A Synchronous Buck Converter

ZSPM4012 Block Diagram

PG

EN

VCC 4.2V

VCC VCC

Under-Voltage Protection

MONITOR & CONTROL

Over-Voltage Protection

Oscillator

Typical Applications    



Error Amp Compensation Network

BST

Over Current Protection

VCC



CBST

Gate Drive Control

Wireless access points, cable modems Set-top boxes DVD, LCD, LED supplies Portable products, including GPS, smart phones, tablet PCs Printers

Bootstrap Voltage

Thermal Protection

Ramp Generator

Vref & Soft Start

VCC

FB

Comparator

Gate Drive

VSW

VOUT

LOUT

COUT

Gate Drive

PGND

Vref

RTOP

FB

PFM Mode Comparator

RBOT

GND

Ordering Information Ordering Code

Description

Package

ZSPM4012AA1W00

ZSPM4012, 2A Synchronous Buck Converter: adjustable output, 0.9V to 5V, 16-pin 3x3mm QFN ZSPM4012, 2A Synchronous Buck Converter: fixed output, 1.5V,16-pin 3x3mm QFN ZSPM4012, 2A Synchronous Buck Converter: fixed output, 1.8V,16-pin 3x3mm QFN ZSPM4012, 2A Synchronous Buck Converter: fixed output, 2.5V,16-pin 3x3mm QFN ZSPM4012, 2A Synchronous Buck Converter: fixed output, 3.3V,16-pin 3x3mm QFN ZSPM4012, 2A Synchronous Buck Converter: fixed output, 5.0V,16-pin 3x3mm QFN ZSPM4012KIT, Evaluation Kit for 2A Synchronous Buck Converter

7” reel with 1000 ICs

ZSPM4012AA1W15 ZSPM4012AA1W18 ZSPM4012AA1W25 ZSPM4012AA1W33 ZSPM4012AA1W50 ZSPM4012KIT

Sales and Further Information

www.zmdi.com

7” reel with 1000 ICs 7” reel with 1000 ICs 7” reel with 1000 ICs 7” reel with 1000 ICs 7” reel with 1000 ICs Kit

analog@zmdi.com

Zentrum Mikroelektronik Dresden AG Grenzstrasse 28 01109 Dresden Germany

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA

Zentrum Mikroelektronik Dresden AG, Japan Office 2nd Floor, Shinbashi Tokyu Bldg.

4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan

ZMD FAR EAST, Ltd. 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

Zentrum Mikroelektronik Dresden AG, Korean Office POSCO Centre Building West Tower, 11th Floor 892 Daechi, 4-Dong, Kangnam-Gu Seoul, 135-777 Korea

Phone +49.351.8822.7.776 Fax +49.351.8822.8.7776

Phone 855-ASK-ZMDI (855-275-9634)

Phone +81.3.6895.7410 Fax +81.3.6895.7301

Phone +886.2.2377.8189 Fax +886.2.2377.8199

Phone +82.2.559.0660 Fax +82.2.559.0700

DISCLAIMER: This information applies to a product under development. Its characteristics and specifications are subject to change without notice. Zentrum Mikroelektronik Dresden AG (ZMD AG) assumes no obligation regarding future manufacture unless otherwise agreed to in writing. The information furnished hereby is believed to be true and accurate. However, under no circumstances shall ZMD AG be liable to any customer, licensee, or any other third party for any special, indirect, incidental, or consequential damages of any kind or nature whatsoever arising out of or in any way related to the furnishing, performance, or use of this technical data. ZMD AG hereby expressly disclaims any liability of ZMD AG to any customer, licensee or any other third party, and any such customer, licensee and any other third party hereby waives any liability of ZMD AG for any damages in connection with or arising out of the furnishing, performance or use of this technical data, whether based on contract, warranty, tort (including negligence), strict liability, or otherwise.

© 2012 Zentrum Mikroelektronik Dresden AG — Rev.1.03— September 21, 2012 All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.

Global Corporate Catalog

111

Products available at ZMDI On-Line Store

ZSPM4013

High Efficiency 3A Synchronous Buck Converter

ZSPM4013

High Efficiency 3A Synchronous Buck Converter

Brief Description

Benefits

The ZSPM4013 is a DC/DC synchronous switching regulator with fully integrated power switches, internal compensation, and full fault protection.

The 1MHz switching frequency enables using small filter components, resulting in reduced board space and reduced bill-of-materials costs.



  

     

Physical Characteristics Junction operating temperature -40°C to 125°C Packaged in a 16pin QFN (3x3mm)

 

Related ZMDI Products ZSPM4011/ZSPM4012: 1A/2A synchronous buck converters, available with adjustable output from 0.9 to 5V or fixed output voltages at 1.5V, 1.8V, 2.5V, 3.3V, 5.0V (16-lead 3x3mm QFN) ZSPM1000: >5A single-phase, single-rail, true digital PWM controller (24-lead 4x4mm QFN)





ZSPM4013 Application Circuits Adjustable Output VCC

BST VCC VSW

CBYPASS

EN

EN

ZSPM4013





PGND



Output voltage options (depends on order code):  Fixed output voltages: 1.5V, 1.8V, 2.5V, 3.3V, or 5V with +/- 2% output tolerance  Adjustable output voltage range: 0.9V to 5V with +/- 1.5% reference Wide input voltage range: 6V to 18V 1MHz +/- 10% fixed switching frequency 3A continuous output current High efficiency – up to 95% Current mode PWM control with pulsefrequency modulation (PFM) mode for improved light load efficiency Voltage supervisor for VOUT reported at the PG pin Input supply under voltage lockout Soft start for controlled startup with no overshoot Full protection for over-current, overtemperature, and VOUT over-voltage Less than 10µA in Disabled Mode Low external component count

Evaluation Kit Documentation



CBST VOUT

LOUT

RTOP

COUT

RBOT FB VOUT 10 kΩ (optional)

PG

PG

Fixed Output VCC

BST

VCC

CBYPASS

EN

EN

PGND



Available Support

GND

Features



ZSPM4013

The ZSPM4013 integrates a wide range of protection circuitry, including input supply undervoltage lockout, output voltage soft start, current limit, VOUT over-voltage, and thermal shutdown.

The ZSPM4013 includes supervisory reporting through the PG (Power Good) open drain output to interface other components in the system.



GND

The ZSPM4013 utilizes current mode feedback in normal regulation pulse-width modulation (PWM) mode. When the regulator is disabled (EN pin is low), the ZSPM4013 draws less than 10µA quiescent current.

Increased battery life Minimal external component count (3 capacitors, 1 inductor) Inherent fault protection and reporting

VSW

CBST VOUT

LOUT COUT

FB VOUT

10kΩ (optional) PG

PG

For more information, contact ZMDI via analog@zmdi.com.

Visit www.zmdi.com for more detailed information

© 2012 Zentrum Mikroelektronik Dresden AG — Rev. 1.10 — October 10, 2012. All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. The information furnished in this publication is subject to changes without notice.

112

ZSPM4013

High Efficiency 3A Synchronous Buck Converter

ZSPM4013 Block Diagram

PG

EN

VCC 4.2V

VCC VCC

Under-Voltage Protection

MONITOR & CONTROL

Over-Voltage Protection

Oscillator

Typical Applications    



Error Amp Compensation Network

BST

Over Current Protection

VCC



CBST

Gate Drive Control

Wireless access points, cable modems Set-top boxes DVD, LCD, LED supplies Portable products, including GPS, smart phones, tablet PCs Printers

Bootstrap Voltage

Thermal Protection

Ramp Generator

Vref & Soft Start

VCC

FB

Comparator

Gate Drive

VSW

VOUT

LOUT

COUT

Gate Drive

PGND

Vref

RTOP

FB

PFM Mode Comparator

RBOT

GND

Ordering Information Ordering Code

Description

Package

ZSPM4013AA1W00

ZSPM4013, 3A Synchronous Buck Converter: adjustable output, 0.9V to 5V, 16-pin 3x3mm QFN ZSPM4013, 3A Synchronous Buck Converter: fixed output, 1.5V,16-pin 3x3mm QFN ZSPM4013, 3A Synchronous Buck Converter: fixed output, 1.8V,16-pin 3x3mm QFN ZSPM4013, 3A Synchronous Buck Converter: fixed output, 2.5V,16-pin 3x3mm QFN ZSPM4013, 3A Synchronous Buck Converter: fixed output, 3.3V,16-pin 3x3mm QFN ZSPM4013, 3A Synchronous Buck Converter: fixed output, 5.0V,16-pin 3x3mm QFN ZSPM4013KIT, Evaluation Kit for 3A Synchronous Buck Converter

7” reel with 1000 ICs

ZSPM4013AA1W15 ZSPM4013AA1W18 ZSPM4013AA1W25 ZSPM4013AA1W33 ZSPM4013AA1W50 ZSPM4013KIT

Sales and Further Information

www.zmdi.com

7” reel with 1000 ICs 7” reel with 1000 ICs 7” reel with 1000 ICs 7” reel with 1000 ICs 7” reel with 1000 ICs Kit

analog@zmdi.com

Zentrum Mikroelektronik Dresden AG Grenzstrasse 28 01109 Dresden Germany

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA

Zentrum Mikroelektronik Dresden AG, Japan Office 2nd Floor, Shinbashi Tokyu Bldg.

4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan

ZMD FAR EAST, Ltd. 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

Zentrum Mikroelektronik Dresden AG, Korea Office U-space 1 Building 11th Floor, Unit JA-1102 670 Sampyeong-dong Bundang-gu, Seongnam-si Gyeonggi-do, 463-400 Korea

Phone +49.351.8822.7.776 Fax +49.351.8822.8.7776

Phone 855-ASK-ZMDI (855-275-9634)

Phone +81.3.6895.7410 Fax +81.3.6895.7301

Phone +886.2.2377.8189 Fax +886.2.2377.8199

Phone +82.31.950.7679 Fax +82.504.841.3026

DISCLAIMER: This information applies to a product under development. Its characteristics and specifications are subject to change without notice. Zentrum Mikroelektronik Dresden AG (ZMD AG) assumes no obligation regarding future manufacture unless otherwise agreed to in writing. The information furnished hereby is believed to be true and accurate. However, under no circumstances shall ZMD AG be liable to any customer, licensee, or any other third party for any special, indirect, incidental, or consequential damages of any kind or nature whatsoever arising out of or in any way related to the furnishing, performance, or use of this technical data. ZMD AG hereby expressly disclaims any liability of ZMD AG to any customer, licensee or any other third party, and any such customer, licensee and any other third party hereby waives any liability of ZMD AG for any damages in connection with or arising out of the furnishing, performance or use of this technical data, whether based on contract, warranty, tort (including negligence), strict liability, or otherwise.

© 2012 Zentrum Mikroelektronik Dresden AG — Rev.1.10— October 10, 2012 All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.

Global Corporate Catalog

113

Products available at ZMDI On-Line Store

ZSPM4023-06

24V/6A Synchronous DC/DC Buck Regulator

ZSPM4023-06

24V6A Synchronous DC/DC Buck Regulator

Brief Description

Benefits

The ZSPM4023-06 is a constant-frequency, synchronous DC/DC buck regulator featuring adaptive on-time control architecture. The ZSPM4023-06 operates over a 4.5V to 28V supply range (24V typical). It has an internal linear regulator that provides a regulated 5V to power the internal control circuitry.

The ZSPM4023-06 operates at a constant 600kHz (typical) switching frequency in continuousconduction mode and can be used to provide up to 6A of output current. The output voltage is adjustable from 5.5V down to 0.8V.



Under medium to heavy loads, the ZSPM4023-06 provides high efficiency and ultra-fast transient response via its rapid-control architecture. Under light load conditions, it maintains high efficiency and a superior transient response by transitioning to variable-frequency, discontinuous mode operation with its ultra-light-load architecture.

The ZSPM4023-06 offers a full suite of protection features to ensure protection of the IC during fault conditions. These include under-voltage lockout to ensure proper operation under power-sag conditions; thermal shutdown; internal soft-start to reduce inrush current; foldback current limiting; and “hiccup” mode short-circuit protection. The ZSPM4023-06 includes a power good (PG) output to allow simple sequencing.

 

Features 

    

Rapid-control architecture enables operation with a high input/output voltage ratio (e.g., VIN = 28V and VOUT = 0.8V) and small output capacitance Adjustable output voltage from 0.8V to 5.5V Universally compatible with most output capacitors—stable with zero to high ESR Power good (PG) output Foldback current limiting and “hiccup” mode short-circuit protection Safe start-up into pre-biased loads

Available Support  

Evaluation Kit Support documentation

Physical Characteristics    

ZSPM4023-06 Typical Application

Ultra-light load efficiency – up to 80% at 10mA Up to 95% efficiency Feedback reference accuracy as high as ±1%



Input voltage range: 4.5V to 28V Output current: up to 6A Switching frequency: 600kHz Junction temperature: –40C to +125C 28-pin 5mm  6mm QFN package Efficiency (VIN = 24V) vs. Output Current

95

5.0V 3.3V 2.5V 1.8V 1.5V 1.2V 1.0V 0.9V 0.8V

90

EFFICIENCY (%)

85 80 75 70 65 60 55 50 0

1

2

3

4

5

6

7

8

OUTPUT CURRENT (A)

For more information, contact ZMDI via Analog@zmdi.com.

Visit www.zmdi.com for more detailed information

© 2013 Zentrum Mikroelektronik Dresden AG — Rev. 1.00 — October 16, 2013. All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. The information furnished in this publication is subject to changes without notice.

114

ZSPM4023-06

24V/6A Synchronous DC/DC Buck Regulator

ZSPM4023-06 Functional Diagram

Typical Applications  Servers, work stations  Routers, switches, and telecom equipment  Base stations

Ordering Information Product Sales Code

Description

Package

ZSPM4023AA1W06

ZSPM4023-06 QFN28 5mmx6mm — Temperature range: –40C to +125C

7” reel with 1000 ICs

ZSPM4023-06-KIT

Evaluation Kit for ZSPM4023-06, including ZSPM4023-06 Evaluation Board.

Kit

Sales and Further Information

www.zmdi.com

Analog@zmdi.com

Zentrum Mikroelektronik Dresden AG Global Headquarters Grenzstrasse 28 01109 Dresden, Germany

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA

Central Office: Phone +49.351.8822.0 Fax +49.351.8822.600

European Technical Support Phone +49.351.8822.7.772 Fax +49.351.8822.87.772

DISCLAIMER: This information applies to a product under development. Its characteristics and specifications are subject to change without notice.

Zentrum Mikroelektronik Dresden AG (ZMD AG) assumes no obligation regarding future manufacture unless otherwise agreed to in writing. The information furnished hereby is believed to be true and accurate. However, under no circumstances shall ZMD AG be liable to any customer, licensee, or any other third party for any special, indirect, incidental, or consequential damages of any kind or nature whatsoever arising out of or in any way related to the furnishing, performance, or use of this technical data. ZMD AG hereby expressly disclaims any liability of ZMD AG to any customer, licensee or any other third party, and any such customer, licensee and any other third party hereby waives any liability of ZMD AG for any damages in connection with or arising out of the furnishing, performance or use of this technical data, whether based on contract, warranty, tort (including negligence), strict liability, or otherwise.

European Sales (Stuttgart) Phone +49.711.674517.55 Fax +49.711.674517.87955

ZMD FAR EAST, Ltd. 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

USA Phone +855.275.9634

Zentrum Mikroelektronik Dresden AG, Japan Office 2nd Floor, Shinbashi Tokyu Bldg.

4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan

Phone +408.883.6310 Fax +408.883.6358

Phone +81.3.6895.7410 Fax +81.3.6895.7301

Phone +886.2.2377.8189 Fax +886.2.2377.8199

Zentrum Mikroelektronik Dresden AG, Korea Office U-space 1 Building 11th Floor, Unit JA-1102 670 Sampyeong-dong Bundang-gu, Seongnam-si Gyeonggi-do, 463-400 Korea Phone +82.31.950.7679 Fax +82.504.841.3026

© 2013 Zentrum Mikroelektronik Dresden AG — Rev. 1.00 — October 16, 2013.

All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.

Global Corporate Catalog

115

Products available at ZMDI On-Line Store

ZSPM9000

Ultra-Compact, High-Performance DrMOS Device

ZSPM9000

Ultra-Compact, High-Performance DrMOS Device

Brief Description

Benefits

The ZSPM9000 DrMOS is a fully optimized, ultracompact, integrated MOSFET plus driver powerstage solution for high-current, high-frequency, synchronous buck DC-DC applications. The device incorporates a driver IC, two power MOSFETs, and a bootstrap Schottky diode in a thermally enhanced, ultra-compact 6mmx6mm PQFN40 package.



With an integrated approach, the ZSPM9000’s complete switching power stage is optimized for driver and MOSFET dynamic performance, system inductance, and power MOSFET RDS(ON). It uses innovative high-performance MOSFET technology, which dramatically reduces switch ringing, eliminating the snubber circuit in most buck converter applications.

An innovative driver IC with reduced dead times and propagation delays further enhances performance.

An internal 12V to 5V linear regulator enables the ZSPM9000 to operate from a single 12V supply. A thermal warning function (THWN) warns of potential over-temperature situations. The ZSPM9000 also incorporates features such as Skip Mode (SMOD) for improved light-load efficiency and a tri-state 3.3V pulse-width modulation (PWM) input for compatibility with a wide range of PWM controllers.

  

Fully optimized system efficiency: >93% peak Clean switching waveforms with minimal ringing 72% space-saving compared to conventional discrete solutions Ideally compatible with ZMDI’s ZSPM1000 true digital PWM controller

Available Support 

ZSPM8000-KIT: Closed Loop Evaluation Kit combined for the ZSPM9000 and ZSPM1000

Physical Characteristics     

Operation temperature: -40°C to +125°C VIN: 8V to 15V (typical 12V) IOUT: 40A (average), 50A (maximum) Low-profile SMD package: 6mmx6mm PQFN40 ZMDI green packaging and RoHS compliant

Typical Application

The ZSPM9000 DrMOS is ideally compatible with ZMDI’s ZSPM1000, a leading-edge configurable digital power-management system controller for nonisolated point-of-load (POL) supplies.

Features              

Based on the Intel® 4.0 DrMOS standard Internal 12V to 5V linear regulator (LDO) High-current handling: up to 50A High-performance copper-clip package Tri-state 3.3V PWM input driver Skip Mode (low-side gate turn off) input (SMOD#) Warning flag for over-temperature conditions Driver output disable function (DISB# pin) Internal pull-up and pull-down for SMOD# and DISB# inputs, respectively Integrated Schottky diode technology in the low-side MOSFET Integrated bootstrap Schottky diode Adaptive gate drive timing for shoot-through protection Under-voltage lockout (UVLO) Optimized for switching frequencies up to 1MHz

Visit www.zmdi.com for more detailed information

For more information, contact ZMDI via SPM@zmdi.com.

© 2013 Zentrum Mikroelektronik Dresden AG — Rev.1.03 — March 8, 2013. All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. The information furnished in this publication is subject to changes without notice.

116

ZSPM9000

Ultra-Compact, High-Performance DrMOS Device

ZSPM9000 Block Diagram VCIN

VDRV

BOOT

VIN

DBoot VIN UVLO

5V LDO

VCC UVLO GH Logic

DISB#

GH

Level Shift

(Q1) HS Power MOSFET GH

10µA 30k

Typical Applications    

Telecom switches Servers and storage Desktop computers Workstations



High-performance gaming motherboards

  

Base stations Network routers Industrial applications

VCIN R UP_PWM

PHASE Dead Time Control

Input Tri-State Logic

PWM R DN_PWM

VSWH VCIN GL

GL Logic

THWN#

(Q2) LS Power MOSFET

VCIN

GL

Temp Sense

30k 10µA

CGND

SMOD#

PGND

Ordering Information Product Sales Code

Description

Package

ZSPM9000AI1R

ZSPM9000 Lead-free PQFN40 — Temperature range: -40°C to +125°C

Reel

ZSPM8000-KIT

Integrated Evaluation Kit for ZSPM9000 and ZSPM1000

Kit

Sales and Further Information

www.zmdi.com

SPM@zmdi.com

Zentrum Mikroelektronik Dresden AG Global Headquarters Grenzstrasse 28 01109 Dresden, Germany

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA

Central Office: Phone +49.351.8822.0 Fax +49.351.8822.600

USA Phone +855.275.9634 Phone +408.883.6310 Fax +408.883.6358

European Technical Support Phone +49.351.8822.7.772 Fax +49.351.8822.87.772

DISCLAIMER: This information applies to a product under development. Its characteristics and specifications are subject to change without notice.

Zentrum Mikroelektronik Dresden AG (ZMD AG) assumes no obligation regarding future manufacture unless otherwise agreed to in writing. The information furnished hereby is believed to be true and accurate. However, under no circumstances shall ZMD AG be liable to any customer, licensee, or any other third party for any special, indirect, incidental, or consequential damages of any kind or nature whatsoever arising out of or in any way related to the furnishing, performance, or use of this technical data. ZMD AG hereby expressly disclaims any liability of ZMD AG to any customer, licensee or any other third party, and any such customer, licensee and any other third party hereby waives any liability of ZMD AG for any damages in connection with or arising out of the furnishing, performance or use of this technical data, whether based on contract, warranty, tort (including negligence), strict liability, or otherwise.

European Sales (Stuttgart) Phone +49.711.674517.55 Fax +49.711.674517.87955

117

Zentrum Mikroelektronik Dresden AG, Japan Office 2nd Floor, Shinbashi Tokyu Bldg.

4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan

ZMD FAR EAST, Ltd. 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

Phone +81.3.6895.7410 Fax +81.3.6895.7301

Phone +886.2.2377.8189 Fax +886.2.2377.8199

Zentrum Mikroelektronik Dresden AG, Korea Office U-space 1 Building 11th Floor, Unit JA-1102 670 Sampyeong-dong Bundang-gu, Seongnam-si Gyeonggi-do, 463-400 Korea Phone +82.31.950.7679 Fax +82.504.841.3026

Global Corporate Catalog

Products available at ZMDI On-Line Store

© 2013 Zentrum Mikroelektronik Dresden AG — Rev. 1.03 — March 8, 2013

All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.

ZSPM9010

Ultra-Compact, High-Performance, High-Frequency DrMOS

ZSPM9010

Ultra-Compact, High-Performance, High-Frequency DrMOS Device

Brief Description

Benefits

The ZSPM9010 DrMOS is a fully optimized, ultracompact, integrated MOSFET plus driver power stage solution for high-current, high-frequency, synchronous buck DC-DC applications. The ZSPM9010 incorporates a driver IC, two power MOSFETs, and a bootstrap Schottky diode in a thermally enhanced, ultra-compact PQFN40 package (6mmx6mm).



With an integrated approach, the ZSPM9010’s complete switching power stage is optimized for driver and MOSFET dynamic performance, system inductance, and power MOSFET RDS(ON). It uses innovative high-performance MOSFET technology, which dramatically reduces switch ringing, eliminating the snubber circuit in most buck converter applications.

  

Fully optimized system efficiency: >93% peak Clean switching waveforms with minimal ringing 72% space-saving compared to conventional discrete solutions Optimized for use with ZMDI’s ZSPM1000 true digital PWM controller

Available Support 

ZSPM8010-KIT: Open-Loop Evaluation Board for ZSPM9010

Physical Characteristics

An innovative driver IC with reduced dead times and propagation delays further enhances performance. A thermal warning function (THWN) warns of potential over-temperature situations. The ZSPM9010 also incorporates features such as Skip Mode (SMOD) for improved light-load efficiency with a tri-state 3.3V pulse-width modulation (PWM) input for compatibility with a wide range of PWM controllers.



The ZSPM9010 DrMOS is compatible with ZMDI’s ZSPM1000, a leading-edge configurable digital power-management system controller for nonisolated point-of-load (POL) supplies.

Typical Application

   

Operation temperature: -40°C to +125°C VIN: 3V to 15V (typical 12V) IOUT: 40A (average), 50A (maximum) Low-profile SMD package: 6mmx6mm PQFN40 ZMDI green packaging and RoHS compliant

Features             

Based on the Intel® 4.0 DrMOS standard High-current handling: up to 50A High-performance copper-clip package Tri-state 3.3V PWM input driver Skip Mode (low-side gate turn-off) input (SMOD#) Warning flag for over-temperature conditions Driver output disable function (DISB# pin) Internal pull-up and pull-down for SMOD# and DISB# inputs, respectively Integrated Schottky diode technology in the low-side MOSFET Integrated bootstrap Schottky diode Adaptive gate drive timing for shoot-through protection Under-voltage lockout (UVLO) Optimized for switching frequencies up to 1MHz

Visit www.zmdi.com for more detailed information

For more information, contact ZMDI via SPM@zmdi.com.

© 2013 Zentrum Mikroelektronik Dresden AG — Rev.1.04— March 8, 2013

All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.

The information furnished in this publication is subject to changes without notice.

118

ZSPM9010

Ultra-Compact, High-Performance, High-Frequency DrMOS

ZSPM9010 Block Diagram VDRV

BOOT

VIN

DBoot

VCIN

UVLO GH Logic

DISB#

GH

Level Shift

(Q1) HS Power MOSFET GH

10µA 30k

Typical Applications    

Telecom switches Servers and storage Desktop computers Workstations



High-performance gaming motherboards

  

VCIN R UP_PWM

PHASE Dead Time Control

Input Tri-State Logic

PWM R DN_PWM

VSWH VDRV GL

GL Logic

THWN#

(Q2) LS Power MOSFET

VCIN

Base stations Network routers Industrial applications

GL

Temp Sense

30k 10µA

CGND

SMOD#

PGND

Ordering Information Product Sales Code

Description

Package

ZSPM9010ZA1R

ZSPM9010 Lead-Free PQFN40 — Temperature range: -40°C to +125°C

Reel

ZSPM8010-KIT

Open-Loop Evaluation Board for ZSPM9010

Kit

Sales and Further Information

www.zmdi.com

SPM@zmdi.com

Zentrum Mikroelektronik Dresden AG Global Headquarters Grenzstrasse 28 01109 Dresden, Germany

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA

Central Office: Phone +49.351.8822.0 Fax +49.351.8822.600

USA Phone +855.275.9634 Phone +408.883.6310 Fax +408.883.6358

European Technical Support Phone +49.351.8822.7.772 Fax +49.351.8822.87.772

DISCLAIMER: This information applies to a product under development. Its characteristics and specifications are subject to change without notice.

Zentrum Mikroelektronik Dresden AG (ZMD AG) assumes no obligation regarding future manufacture unless otherwise agreed to in writing. The information furnished hereby is believed to be true and accurate. However, under no circumstances shall ZMD AG be liable to any customer, licensee, or any other third party for any special, indirect, incidental, or consequential damages of any kind or nature whatsoever arising out of or in any way related to the furnishing, performance, or use of this technical data. ZMD AG hereby expressly disclaims any liability of ZMD AG to any customer, licensee or any other third party, and any such customer, licensee and any other third party hereby waives any liability of ZMD AG for any damages in connection with or arising out of the furnishing, performance or use of this technical data, whether based on contract, warranty, tort (including negligence), strict liability, or otherwise.

European Sales (Stuttgart) Phone +49.711.674517.55 Fax +49.711.674517.87955

Zentrum Mikroelektronik Dresden AG, Japan Office 2nd Floor, Shinbashi Tokyu Bldg.

4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan

ZMD FAR EAST, Ltd. 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

Phone +81.3.6895.7410 Fax +81.3.6895.7301

Phone +886.2.2377.8189 Fax +886.2.2377.8199

Zentrum Mikroelektronik Dresden AG, Korea Office U-space 1 Building 11th Floor, Unit JA-1102 670 Sampyeong-dong Bundang-gu, Seongnam-si Gyeonggi-do, 463-400 Korea Phone +82.31.950.7679 Fax +82.504.841.3026

Global Corporate Catalog

Products available at ZMDI On-Line Store

119© 2013 Zentrum Mikroelektronik Dresden AG — Rev. 1.04 — March 8, 2013

All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.

ZSPM9060

Ultra-Compact, High-Performance, High-Frequency DrMOS Device

ZSPM9060

Ultra-Compact, High-Performance, High-Frequency DrMOS Device

Brief Description

Benefits

The ZSPM9060 is ZMDI’s next-generation, fully optimized, ultra-compact, integrated MOSFET plus driver power stage solution for high-current, highfrequency, synchronous buck DC-DC applications.

The ZSPM9060 integrates a driver IC, two power MOSFETs, and a bootstrap Schottky diode into a thermally enhanced, ultra-compact 6x6mm package.



With an integrated approach, the complete switching power stage is optimized with regard to driver and MOSFET dynamic performance, system inductance, and power MOSFET RDS(ON). The ZSPM9060 uses innovative high-performance MOSFET technology, which dramatically reduces switch ringing, eliminating the need for a snubber circuit in most buck converter applications.

A driver IC with reduced dead times and propagation delays further enhances the performance. A thermal warning function warns of a potential over-temperature situation. The ZSPM9060 also provides a Skip Mode (SMOD#) for improved light-load efficiency. It also provides a tri-state 3.3V PWM input for compatibility with a wide range of PWM controllers.

The ZSPM9060 DrMOS is compatible with ZMDI’s ZSPM1000, a leading-edge configurable digital power-management system controller for non-isolated point-of-load (POL) supplies.

   

Fully optimized system efficiency: >93% peak Clean switching waveforms with minimal ringing 72% space-saving compared to conventional discrete solutions High current handling Optimized for use with ZMDI’s ZSPM1000 true digital PWM controller

Available Support 

ZSPM8060-KIT: Open-Loop Evaluation Board for ZSPM9060

Physical Characteristics     

Operation temperature: -40°C to +125°C VIN: 3V to 16V (typical 12V) IOUT: up to 60A Low-profile SMD package: 6mmx6mm PQFN40 ZMDI green packaging and RoHS compliant

Typical Application

Features             

Based on the Intel® 4.0 DrMOS standard High-current handling: up to 60A High-performance PQFN copper-clip package Tri-state 3.3V PWM input driver Skip Mode (low-side gate turn-off) input (SMOD#) Warning flag for over-temperature conditions Driver output disable function (DISB# pin) Internal pull-up and pull-down for SMOD# and DISB# inputs, respectively Integrated Schottky diode technology in the low-side MOSFET Integrated bootstrap Schottky diode Adaptive gate drive timing for shoot-through protection Under-voltage lockout (UVLO) Optimized for switching frequencies  1MHz For more information, contact ZMDI via SPM@zmdi.com.

© 2013 Zentrum Mikroelektronik Dresden AG — Rev. 1.01 — March 8, 2013. All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. The information furnished in this publication is subject to changes without notice.

Visit www.zmdi.com for more detailed information

120

ZSPM9060

Ultra-Compact, High-Performance, High-Frequency DrMOS Device

ZSPM9060 Block Diagram VDRV





  



VIN

DBoot

Typical Applications 

BOOT

High-performance gaming motherboards Compact blade servers, Vcore and non-Vcore DC-DC converters

VCIN

UVLO GH Logic

DISB#

GH

Level Shift

(Q1) HS Power MOSFET GH

10µA 30k

VCIN

Desktop computers, Vcore and Non-Vcore DC-DC converters

R UP_PWM

R DN_PWM

High-current DC-DC pointof-load converters Networking and telecom microprocessor voltage regulators

Dead Time Control

Input Tri-State Logic

PWM

Workstations

PHASE

VSWH VDRV GL

GL Logic

THWN#

(Q2) LS Power MOSFET

VCIN

GL

Temp Sense

Small form-factor voltage regulator modules

30k 10µA

CGND

SMOD#

PGND

Ordering Information Sales Code

Description

Package

ZSPM9060ZA1R

ZSPM9060 RoHS-Compliant Clip-Bond PQFN40 - Temperature range: -40 to +125 °C

Reel

ZSPM8060-KIT

Open-Loop Evaluation Board for ZSPM9060

Circuit Board

Sales and Further Information

www.zmdi.com

SPM@zmdi.com

Zentrum Mikroelektronik Dresden AG Global Headquarters Grenzstrasse 28 01109 Dresden, Germany

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA

Central Office: Phone +49.351.8822.0 Fax +49.351.8822.600

USA Phone +855.275.9634 Phone +408.883.6310 Fax +408.883.6358

European Technical Support Phone +49.351.8822.7.772 Fax +49.351.8822.87.772

DISCLAIMER: This information applies to a product under development. Its characteristics and specifications are subject to change without notice.

Zentrum Mikroelektronik Dresden AG (ZMD AG) assumes no obligation regarding future manufacture unless otherwise agreed to in writing. The information furnished hereby is believed to be true and accurate. However, under no circumstances shall ZMD AG be liable to any customer, licensee, or any other third party for any special, indirect, incidental, or consequential damages of any kind or nature whatsoever arising out of or in any way related to the furnishing, performance, or use of this technical data. ZMD AG hereby expressly disclaims any liability of ZMD AG to any customer, licensee or any other third party, and any such customer, licensee and any other third party hereby waives any liability of ZMD AG for any damages in connection with or arising out of the furnishing, performance or use of this technical data, whether based on contract, warranty, tort (including negligence), strict liability, or otherwise.

European Sales (Stuttgart) Phone +49.711.674517.55 Fax +49.711.674517.87955

Zentrum Mikroelektronik Dresden AG, Japan Office 2nd Floor, Shinbashi Tokyu Bldg.

4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan

ZMD FAR EAST, Ltd. 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan

Phone +81.3.6895.7410 Fax +81.3.6895.7301

Phone +886.2.2377.8189 Fax +886.2.2377.8199

Zentrum Mikroelektronik Dresden AG, Korea Office U-space 1 Building 11th Floor, Unit JA-1102 670 Sampyeong-dong Bundang-gu, Seongnam-si Gyeonggi-do, 463-400 Korea Phone +82.31.950.7679 Fax +82.504.841.3026

© 2013 Zentrum Mikroelektronik Dresden AG — Rev. 1.01 — March 8, 2013.

All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.

Global Corporate Catalog

121

Products available at ZMDI On-Line Store

Contact Name: E-Mail Address: Phone Number:

(

)

Distributor/Rep. Firm:

Zentrum Mikroelektronik Dresden AG Zentrum Mikroelektronik Dresden AG Global Headquarters Grenzstrasse 28 01109 Dresden Germany Central Office: Phone +49.351.8822.0 Fax +49.351.8822.600 European Technical Support Phone +49.351.8822.7.772 Fax +49.351.8822.87.772 European Sales (Stuttgart) Phone +49.711.674517.55 Fax +49.711.674517.87955 www.zmdi.com

Zentrum Mikroelektronik Dresden AG, Japan Office 2nd Fl., Shinbashi Tokyu Bldg., 4-21-3, Shinbashi, Minato-ku, Tokyo, 105-0004 Japan Phone +81.3.6895.7410 Fax +81.3.6895.7301

ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA Phone +855.275.9634 (USA) Phone +408.883.6310 Fax +408.883.6358

Zentrum Mikroelektronik Dresden AG, Korea Office U-space 1 Building 11th Floor, Unit JA-1102 670 Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, 463-400 Korea Phone +82.31.950.7679 Fax +82.504.841.3026 ZMD Far East, Ltd. 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan Phone +886.2.2377.8189 Fax +886.2.2377.8199 v1.2014