1112_poc

11|12

Snow 2011/12

2 3

Rider: Jeremy Jones ŠTero Repo

2 3

Rider: Jeremy Jones ŠTero Repo

POC 2011/12 We always refused to address women with the usual “rosy-girly-stuff”, we think it’s ridiculous. Having said that, over the 6 years we have been around, we have come to learn a bit about anatomy and the differences between genders. There are differences and we admit that we have been discriminating, as a number of products only had male users in mind.

POC WO is extracted on the basis that, because of hips and narrower waists, back protectors tend to climb up under the arm pits while the goggles and helmets are often too big for smaller female faces. This in addition to the fact that most women would tell you that their hands are freezing, their hands are narrower and their fingers longer. And that’s why we thought it would make sense to develop products that would fight these issues and simply offer more adequate products for women.

We have also learnt that designing goggles that fit perfectly with our helmets is not an easy task. Beyond head size and circumference, there are different shapes, from long and narrow to hemispheric and innumerable other variations. And then there are foreheads, noses and cheeks... you get the picture. That’s why the helmet and goggle combo will always be individual.

Normally, about 70% would say that a pair of POC goggles fit a POC helmet perfectly. To reach 100%, POC has developed a new mid-size goggle – Retina - and added more sizes to our current goggle models. The Retina goggle also takes the lead by introducing a new level of optic quality lenses - NXT. These lenses are developed from the ones we use for our POC sunglasses.

POCs mission is to do the best we can to possibly save lives and to reduce the consequences of accidents for gravity sport athletes. Remember, however, that skill and common sense always provide better protection than anything money can buy.

4

5

POC 2011/12 We always refused to address women with the usual “rosy-girly-stuff”, we think it’s ridiculous. Having said that, over the 6 years we have been around, we have come to learn a bit about anatomy and the differences between genders. There are differences and we admit that we have been discriminating, as a number of products only had male users in mind.

POC WO is extracted on the basis that, because of hips and narrower waists, back protectors tend to climb up under the arm pits while the goggles and helmets are often too big for smaller female faces. This in addition to the fact that most women would tell you that their hands are freezing, their hands are narrower and their fingers longer. And that’s why we thought it would make sense to develop products that would fight these issues and simply offer more adequate products for women.

We have also learnt that designing goggles that fit perfectly with our helmets is not an easy task. Beyond head size and circumference, there are different shapes, from long and narrow to hemispheric and innumerable other variations. And then there are foreheads, noses and cheeks... you get the picture. That’s why the helmet and goggle combo will always be individual.

Normally, about 70% would say that a pair of POC goggles fit a POC helmet perfectly. To reach 100%, POC has developed a new mid-size goggle – Retina - and added more sizes to our current goggle models. The Retina goggle also takes the lead by introducing a new level of optic quality lenses - NXT. These lenses are developed from the ones we use for our POC sunglasses.

POCs mission is to do the best we can to possibly save lives and to reduce the consequences of accidents for gravity sport athletes. Remember, however, that skill and common sense always provide better protection than anything money can buy.

4

5

This is us poc is a swedish company, built on a strong mission; to do everything we can to possibly save lives and to reduce consequences of accidents for gravity sports athletes, by developing and renewing what personal protection is all about. When it comes to increasing the degree of protection, POC has already set a new standard with patented technical solutions in construction, material combinations and engi­neering.

Our mission is to do everything we can to possibly save lives and to reduce consequenses of accidents for gravity sports athletes. poc works in a cross-scientific way from the office in SaltsjĂśbaden outside of Stockholm.

The organization involves competences from different fields, such as engineers, material specialists, industrial and graphic designers, neurologists and specialists in spinal cord injuries.

Stockholm is an important center for some of Europe’s leading research and development experts in the areas of safety, medicine, health care, advanced product development and testing. all our products have been tested by top gravity sport athletes and then further refined to perfection. They love to go flat out, however, without risking cuts, bruises, headaches or more serious injuries such as back- and brain damage. The end result is a line of lightweight, high performance gear that offers the ultimate protection against injury, thanks to superior impact absorption and penetration resistance. when developing a product at poc, we do it in the spirit of doing the best. When it comes to safety, quality and performance, we never compromise when choosing a construction or material.

Even if it would mean cheaper products or increased margins.

6

7

This is us poc is a swedish company, built on a strong mission; to do everything we can to possibly save lives and to reduce consequences of accidents for gravity sports athletes, by developing and renewing what personal protection is all about. When it comes to increasing the degree of protection, POC has already set a new standard with patented technical solutions in construction, material combinations and engi­neering.

Our mission is to do everything we can to possibly save lives and to reduce consequenses of accidents for gravity sports athletes. poc works in a cross-scientific way from the office in SaltsjĂśbaden outside of Stockholm.

The organization involves competences from different fields, such as engineers, material specialists, industrial and graphic designers, neurologists and specialists in spinal cord injuries.

Stockholm is an important center for some of Europe’s leading research and development experts in the areas of safety, medicine, health care, advanced product development and testing. all our products have been tested by top gravity sport athletes and then further refined to perfection. They love to go flat out, however, without risking cuts, bruises, headaches or more serious injuries such as back- and brain damage. The end result is a line of lightweight, high performance gear that offers the ultimate protection against injury, thanks to superior impact absorption and penetration resistance. when developing a product at poc, we do it in the spirit of doing the best. When it comes to safety, quality and performance, we never compromise when choosing a construction or material.

Even if it would mean cheaper products or increased margins.

6

7

POC Lab

The mission

Innovations

New technologies

POC Lab is our scientific forum. It brings together experts who provide us with invaluable assistance in ensuring that we develop the most relevant, reliable and advanced protective products on the market today. The POC Lab enables a close and rewarding collaboration with some of the world’s foremost sports medicine experts, brain scientists and specialists in spinal cord injuries.

MIPS – developed in cooperation with Royal Institute of Technology and Karolinska Institute, Sweden The new MIPS technology mimics one of the safety systems which already exist in the human head. When the head is subjected to an oblique impact, the brain can slide along a membrane on the inner surface of the skull, which reduces the forces transmitted to the brain. This protective feature has, with the MIPS technology, been incorporated into the helmet.

In a helmet equipped with MIPS technology, the shell and the liner are separated by a low friction layer. When subjected to an oblique impact, the low friction layer allows a small rotation of the shell relative to the liner. Experimental tests shows a significant reduction of the forces to the brain. Find more information about the tests at www.mipshelmet.com Accident statistics show that the most common accident occurs in an oblique impact to the head, resulting in a rotation of the head and brain.

As a complement to the POC Lab, we also seek help from material technologists – and from people such as you, who make avid use of our protective gear in practice, ranging from proficient X-Game riders to the elite at the World Cup level.

The brain is more sensitive to oblique impacts than radial impacts. However, according to the helmet test regulations, the helmets are dropped vertically onto the impact surface, resulting in a radial force to the head. This is why helmets today have good protective properties for vertical impacts while the protection is not optimized for oblique impacts. MIPS AB has therefore developed MIPS technology to provide substantially increased protection against oblique impacts.

Members of the POC Lab are carefully selected for their unique expertise.

Each member shares POC’s mission to save lives and reduce the severity of injuries resulting from accidents.

Conventional helmet

Helmet equipped with MIPS

During impact ▼

Maximum load to brain ▼

Load transmitted to the brain High

Members of POC Lab

Medium

Low

Before impact ▼

Claes Hulting

M.D Ph.D. Medical Director Karolinska Hospital Spinalis Policlinic at Rehab Station Stockholm Per Hamid Ghatan

M.D. Ph.D. Karolinska Institute Dept. of Clinical Neuroscience

Impact direction Surface ▲

Finite element model of the human head, MIPS AB. Developed by by Svein Kleiven, KTH. Software: LSDYNA by courtesy of ERAB, Sweden.

Deformation of the brain from an oblique impact when the rider is wearing a conventional helmet and a helmet with MIPS technology.

The curved arrows shows the movement of the outer shell relative to the liner, reducing the forces to the brain.

Magnus Wörnert

Former ski racer and expert in the ski trade fredrik lundh

POLYGIENE – helmets and armor stay fresh and last longer Polygiene permanent odor control treatment neutralizes odor by stopping the growth of odor-causing bacteria and fungi, and makes your helmet and armor stay fresh and odor free. Your gear also lasts longer because bacteria never get the chance to break down the synthetic fibers. Polygiene is safe next to your skin and helps reduce your environmental impact, too.

Polygiene odor control treatment is included in all POC products where applicable.

M.D. Karolinska Hospital Dept. of Orthopedic Surgery

Without Polygiene Odor

8

9

With Polygiene Odor

Odor-free

Odor-free

Odor-causing bacteria settles into the fabric and multiplies

Inhibits the growth of odor-causing bacteria on the fabric

Skin

Skin

Sweat and odor-causing bacteria

Sweat and odor-causing bacteria

POC Lab

The mission

Innovations

New technologies

POC Lab is our scientific forum. It brings together experts who provide us with invaluable assistance in ensuring that we develop the most relevant, reliable and advanced protective products on the market today. The POC Lab enables a close and rewarding collaboration with some of the world’s foremost sports medicine experts, brain scientists and specialists in spinal cord injuries.

MIPS – developed in cooperation with Royal Institute of Technology and Karolinska Institute, Sweden The new MIPS technology mimics one of the safety systems which already exist in the human head. When the head is subjected to an oblique impact, the brain can slide along a membrane on the inner surface of the skull, which reduces the forces transmitted to the brain. This protective feature has, with the MIPS technology, been incorporated into the helmet.

In a helmet equipped with MIPS technology, the shell and the liner are separated by a low friction layer. When subjected to an oblique impact, the low friction layer allows a small rotation of the shell relative to the liner. Experimental tests shows a significant reduction of the forces to the brain. Find more information about the tests at www.mipshelmet.com Accident statistics show that the most common accident occurs in an oblique impact to the head, resulting in a rotation of the head and brain.

As a complement to the POC Lab, we also seek help from material technologists – and from people such as you, who make avid use of our protective gear in practice, ranging from proficient X-Game riders to the elite at the World Cup level.

The brain is more sensitive to oblique impacts than radial impacts. However, according to the helmet test regulations, the helmets are dropped vertically onto the impact surface, resulting in a radial force to the head. This is why helmets today have good protective properties for vertical impacts while the protection is not optimized for oblique impacts. MIPS AB has therefore developed MIPS technology to provide substantially increased protection against oblique impacts.

Members of the POC Lab are carefully selected for their unique expertise.

Each member shares POC’s mission to save lives and reduce the severity of injuries resulting from accidents.

Conventional helmet

Helmet equipped with MIPS

During impact ▼

Maximum load to brain ▼

Load transmitted to the brain High

Members of POC Lab

Medium

Low

Before impact ▼

Claes Hulting

M.D Ph.D. Medical Director Karolinska Hospital Spinalis Policlinic at Rehab Station Stockholm Per Hamid Ghatan

M.D. Ph.D. Karolinska Institute Dept. of Clinical Neuroscience

Impact direction Surface ▲

Finite element model of the human head, MIPS AB. Developed by by Svein Kleiven, KTH. Software: LSDYNA by courtesy of ERAB, Sweden.

Deformation of the brain from an oblique impact when the rider is wearing a conventional helmet and a helmet with MIPS technology.

The curved arrows shows the movement of the outer shell relative to the liner, reducing the forces to the brain.

Magnus Wörnert

Former ski racer and expert in the ski trade fredrik lundh

POLYGIENE – helmets and armor stay fresh and last longer Polygiene permanent odor control treatment neutralizes odor by stopping the growth of odor-causing bacteria and fungi, and makes your helmet and armor stay fresh and odor free. Your gear also lasts longer because bacteria never get the chance to break down the synthetic fibers. Polygiene is safe next to your skin and helps reduce your environmental impact, too.

Polygiene odor control treatment is included in all POC products where applicable.

M.D. Karolinska Hospital Dept. of Orthopedic Surgery

Without Polygiene Odor

8

9

With Polygiene Odor

Odor-free

Odor-free

Odor-causing bacteria settles into the fabric and multiplies

Inhibits the growth of odor-causing bacteria on the fabric

Skin

Skin

Sweat and odor-causing bacteria

Sweat and odor-causing bacteria

About

POC’s Local dealers select a group of talented young skiers between 12 and 17 years old who have a passion for skiing and the will and motivation to reach an elite level. These youngsters from all over the world, come from diverse disciplines such as downhill, ski, big jump, big mountain, freeriding and jibbing.

They have at least one thing in common, a strong will to perform. Together they make up the Local Talent Team. We sponsor their use of POC’s safety products and learn from their experience to provide input to our product development.

Local Talent Program

About

We are proud to work with some of the best pathfinders out there. Together with the medical back bone through POC Lab, their findings and feedback is the platform as we start developing new products or refining current ones.

Moreover it’s a great bunch of people. Wonderful to know and wonderful to work with!

Austria

Team athletes

Anders Backe Andre Myhrer Aurélien Ducroz Axel Bäck

Austria

Blake­­Nyman

The POC Local Talent Program is our way to promote the ski stars of tomorrow and make sure injuries won´t stop them from reaching the top.

Bode miller

Chemmy Alcott Flo Orley

Hedda­Berntssen

Jacopo Bufacchi

Jon Olsson

Julia Mancuso

Maria Pietilä Holmner

Tanner Hall

TJ SCHILLEr

WORLD WIDE TEAM

spain

LTP ambassadors Julia Mancuso & Jon Olsson

france

Jeremy jones

CANADA

10

Mattias Hargin

Mitch Tölderer 11

Steven Nyman

About

POC’s Local dealers select a group of talented young skiers between 12 and 17 years old who have a passion for skiing and the will and motivation to reach an elite level. These youngsters from all over the world, come from diverse disciplines such as downhill, ski, big jump, big mountain, freeriding and jibbing.

They have at least one thing in common, a strong will to perform. Together they make up the Local Talent Team. We sponsor their use of POC’s safety products and learn from their experience to provide input to our product development.

Local Talent Program

About

We are proud to work with some of the best pathfinders out there. Together with the medical back bone through POC Lab, their findings and feedback is the platform as we start developing new products or refining current ones.

Moreover it’s a great bunch of people. Wonderful to know and wonderful to work with!

Austria

Team athletes

Anders Backe Andre Myhrer Aurélien Ducroz Axel Bäck

Austria

Blake­­Nyman

The POC Local Talent Program is our way to promote the ski stars of tomorrow and make sure injuries won´t stop them from reaching the top.

Bode miller

Chemmy Alcott Flo Orley

Hedda­Berntssen

Jacopo Bufacchi

Jon Olsson

Julia Mancuso

Maria Pietilä Holmner

Tanner Hall

TJ SCHILLEr

WORLD WIDE TEAM

spain

LTP ambassadors Julia Mancuso & Jon Olsson

france

Jeremy jones

CANADA

10

Mattias Hargin

Mitch Tölderer 11

Steven Nyman

HEAD

Current designs When POC first started up, there were two types of helmets on the market. The traditional helmet has a hard shell and a liner of

softer expanded polystyrene (EPS) which has good penetration resistance and energy distribution properties. The disadvantage of the hard shell is that upon impact, the hard structure causes a sudden stop. The brain may continue to move in the direction of travel and the impact is not absorbed very well. The hard shell is also quite heavy which may cause the helmet to bounce off the ground on impact. These properties can lead to brain damage and whiplash injuries.

the second type of helmet is the ‘in-mold’ type, which originated in the field of cycling. These molded helmets have a thinner shell of hard plastic that covers the ears and the back of the neck.

Normally, both the traditional hard shell and in-mold helmets rely on expanded Polystyrene (EPS) for the shock absorption.

EPS absorbs energy by plastic deformation, meaning it is deformed permanently upon impact. Therefore, a helmet liner made of EPS will not be good at absorbing repetitive shocks. Another aspect that is not taken into account in traditional helmets is the effects of rotational violence, which is a major risk in oblique impacts.

Six different helmet concepts for six different needs ”Semi-hard shell” 2.0 helmets

When first developed and launched

season 2005/2006, the aim of the “semi hard shell” helmets was to combine the advantages of both in-mold and hard shell helmets. The excellent energy absorption properties from the in-mold helmets was achieved by using a thin and light outer shell and the ability to withstand sharp object penetration was solved by adding a barrier made of ballistic aramid. POC has been refining the concept over a couple of seasons and is now presenting the second generation of these helmets, the “semi hard shell 2.0” collection. By studying today’s top ski racers, it was evident that a helmet used for ski racing is likely to be exposed for repeated violence from hitting gates at high speed. The updated helmets are therefore equipped with a liner of Expanded Polypropylene (EPP) instead of EPS. The difference between the materials is that EPP, unlike EPS, does not deform permanently on impact and is therefore suitable to absorb repetitive shocks. The outer shell is also updated for increased durability and optimized for the new liner material (all Skull helmets).

Unique in-mold helmets

starting from the amazing properties

of our Skull Comp helmet, we have taken the technology further by incorporating the Aramid ballistic penetration barrier APB, into a series of in-mold helmets – Synapsis.

This has enabled us to overcome the traditional problems of in-mold helmets breaking easily and not being able to withstand penetration. The Synapsis helmets are designed to offer extreme lightweight, ventilation and comfort without compromising safety. The helmets have soft 12

13

foam pads for a perfect individual fit and detachable ear pads (all Synapsis helmets).

Double shell helmets

improving properties such as better

shock absorption, lower weight and penetration resistance are some of the major advantages made possible by using POC’s patent pending Aramid ballistic penetration barrier: APB. Transferring these qualities and lessons learned into a fully ventilated system has led to the new revolutionary, patent pending; Ventilated-Double-Shell-Anti-Penetration: VDSAP.

the concept was initially developed for the Receptor+ all season helmet. A helmet developed and certified in Europe and the US for skiing, snowboarding, skateboarding, biking and water sports. VDSAP is built with double shells, placed offset, for maximum penetration resistance and has channels in between to evacuate heat, moisture or water. The inner shell is an extremely thin in-mold shell, while the outer shell is a hard shell of ABS and PC. The properties are amazing and used in all Receptor helmets and the Cortex DH. Optimized vent helmets

some markets have asked us to come

up with a super ventilated helmet, adjustable for cold days. With the ­experience gained from previous models, innovations and patents, we have come up with a cocktail of different ventilation concepts, all included in one helmet.

When using an adjustable system, there is also the challenge of keeping weight down. The solution combines three different ventilation systems. At the front, there is the POC patent VDSAP, a double

shell solution where air is transported between two layers of shell, to avoid direct wind and to withstand penetration from sharp objects. At the back, there are ventilation holes for the helmet to function as a chimney, where air is pulled from the front to the rear. on top, the helmet has generous venti-

lation with six vents, that may be closed or semi-closed with a turning-devise.

This combination makes the helmet very airy and very light (all Frontal helmets).

Carbon Fiber helmets

so far, carbon fiber helmets haven’t

made too much sense. The methods of industrially laying carbon fiber have been counterproductive to the goal of thin, light shells that deform or destruct at certain stress points. The shells have been too stiff and too thick for use in ski helmets. however, thanks to a new method,

we can make a super-thin and superlight carbon fiber shell, which is highly flexible and makes sense to use in a ski helmet. Unfortunately the technique is still very expensive but it’s so good that we want to introduce it in a new line of Skull Helmets; Super Skull Comp.

Multi directional impact protection system helmets

Traditional helmet testing methods only test vertical falls. However, the real situation is that, if crashing at speed, the impact will be oblique. This means that the helmet and head will rotate when hitting the ground, resulting in rotational forces to the brain. The brain is highly sensitive to this kind of violence.

HEAD

Current designs When POC first started up, there were two types of helmets on the market. The traditional helmet has a hard shell and a liner of

softer expanded polystyrene (EPS) which has good penetration resistance and energy distribution properties. The disadvantage of the hard shell is that upon impact, the hard structure causes a sudden stop. The brain may continue to move in the direction of travel and the impact is not absorbed very well. The hard shell is also quite heavy which may cause the helmet to bounce off the ground on impact. These properties can lead to brain damage and whiplash injuries.

the second type of helmet is the ‘in-mold’ type, which originated in the field of cycling. These molded helmets have a thinner shell of hard plastic that covers the ears and the back of the neck.

Normally, both the traditional hard shell and in-mold helmets rely on expanded Polystyrene (EPS) for the shock absorption.

EPS absorbs energy by plastic deformation, meaning it is deformed permanently upon impact. Therefore, a helmet liner made of EPS will not be good at absorbing repetitive shocks. Another aspect that is not taken into account in traditional helmets is the effects of rotational violence, which is a major risk in oblique impacts.

Six different helmet concepts for six different needs ”Semi-hard shell” 2.0 helmets

When first developed and launched

season 2005/2006, the aim of the “semi hard shell” helmets was to combine the advantages of both in-mold and hard shell helmets. The excellent energy absorption properties from the in-mold helmets was achieved by using a thin and light outer shell and the ability to withstand sharp object penetration was solved by adding a barrier made of ballistic aramid. POC has been refining the concept over a couple of seasons and is now presenting the second generation of these helmets, the “semi hard shell 2.0” collection. By studying today’s top ski racers, it was evident that a helmet used for ski racing is likely to be exposed for repeated violence from hitting gates at high speed. The updated helmets are therefore equipped with a liner of Expanded Polypropylene (EPP) instead of EPS. The difference between the materials is that EPP, unlike EPS, does not deform permanently on impact and is therefore suitable to absorb repetitive shocks. The outer shell is also updated for increased durability and optimized for the new liner material (all Skull helmets).

Unique in-mold helmets

starting from the amazing properties

of our Skull Comp helmet, we have taken the technology further by incorporating the Aramid ballistic penetration barrier APB, into a series of in-mold helmets – Synapsis.

This has enabled us to overcome the traditional problems of in-mold helmets breaking easily and not being able to withstand penetration. The Synapsis helmets are designed to offer extreme lightweight, ventilation and comfort without compromising safety. The helmets have soft 12

13

foam pads for a perfect individual fit and detachable ear pads (all Synapsis helmets).

Double shell helmets

improving properties such as better

shock absorption, lower weight and penetration resistance are some of the major advantages made possible by using POC’s patent pending Aramid ballistic penetration barrier: APB. Transferring these qualities and lessons learned into a fully ventilated system has led to the new revolutionary, patent pending; Ventilated-Double-Shell-Anti-Penetration: VDSAP.

the concept was initially developed for the Receptor+ all season helmet. A helmet developed and certified in Europe and the US for skiing, snowboarding, skateboarding, biking and water sports. VDSAP is built with double shells, placed offset, for maximum penetration resistance and has channels in between to evacuate heat, moisture or water. The inner shell is an extremely thin in-mold shell, while the outer shell is a hard shell of ABS and PC. The properties are amazing and used in all Receptor helmets and the Cortex DH. Optimized vent helmets

some markets have asked us to come

up with a super ventilated helmet, adjustable for cold days. With the ­experience gained from previous models, innovations and patents, we have come up with a cocktail of different ventilation concepts, all included in one helmet.

When using an adjustable system, there is also the challenge of keeping weight down. The solution combines three different ventilation systems. At the front, there is the POC patent VDSAP, a double

shell solution where air is transported between two layers of shell, to avoid direct wind and to withstand penetration from sharp objects. At the back, there are ventilation holes for the helmet to function as a chimney, where air is pulled from the front to the rear. on top, the helmet has generous venti-

lation with six vents, that may be closed or semi-closed with a turning-devise.

This combination makes the helmet very airy and very light (all Frontal helmets).

Carbon Fiber helmets

so far, carbon fiber helmets haven’t

made too much sense. The methods of industrially laying carbon fiber have been counterproductive to the goal of thin, light shells that deform or destruct at certain stress points. The shells have been too stiff and too thick for use in ski helmets. however, thanks to a new method,

we can make a super-thin and superlight carbon fiber shell, which is highly flexible and makes sense to use in a ski helmet. Unfortunately the technique is still very expensive but it’s so good that we want to introduce it in a new line of Skull Helmets; Super Skull Comp.

Multi directional impact protection system helmets

Traditional helmet testing methods only test vertical falls. However, the real situation is that, if crashing at speed, the impact will be oblique. This means that the helmet and head will rotate when hitting the ground, resulting in rotational forces to the brain. The brain is highly sensitive to this kind of violence.

Helmet

Skull Light WO

We wanted to make something different than the usual “shrink it and pink it� concept often seen in various product lines aimed towards women. We looked at the specific needs and the anatomy among female users and went from there. The result is a specific version of Skull Light for women, taking into consideration the slightly different head shape among women, who in general show a greater breadth in relation to the length of the head compared to male users. Other features include comfortable suede-like padding with anti-static treatment and a convenient size adjustment system. Sizes: XS-S, M-L

Helmet

Receptor Bug Adjustable

Accessory

Bankers Brim fits all Receptor BUG helmets.

It will protect your goggles from scratches and from snow or water running down the helmet.

Additional Colors

14

Additional Colors

15

To make our most appreciated helmet; Receptor BUG, suitable to even more users, we have added a size adjustment system. The proven safe construction of the Receptor model with the patented overlapping double shell system offers a well ventilated helmet without sacrificing penetration resistance. An advanced outer shell and the in-mold liner in polycarbonate and EPS offers a tough and durable construction and provides excellent protection. Sizes: XS-S, M-L, XL -XXL

Helmet

Skull Light WO

We wanted to make something different than the usual “shrink it and pink it� concept often seen in various product lines aimed towards women. We looked at the specific needs and the anatomy among female users and went from there. The result is a specific version of Skull Light for women, taking into consideration the slightly different head shape among women, who in general show a greater breadth in relation to the length of the head compared to male users. Other features include comfortable suede-like padding with anti-static treatment and a convenient size adjustment system. Sizes: XS-S, M-L

Helmet

Receptor Bug Adjustable

Accessory

Bankers Brim fits all Receptor BUG helmets.

It will protect your goggles from scratches and from snow or water running down the helmet.

Additional Colors

14

Additional Colors

15

To make our most appreciated helmet; Receptor BUG, suitable to even more users, we have added a size adjustment system. The proven safe construction of the Receptor model with the patented overlapping double shell system offers a well ventilated helmet without sacrificing penetration resistance. An advanced outer shell and the in-mold liner in polycarbonate and EPS offers a tough and durable construction and provides excellent protection. Sizes: XS-S, M-L, XL -XXL

Helmet

Pro Models

Receptor Bug

To make the Receptor BUG helmet, we’ve taken the most advanced multi-purpose helmet out there, the Receptor + and altered it especially for snow sports. The patented system with double overlapping shells lets air in and heat out and protects from sharp objects. Ventilation can also be closed for cold days. An advanced outer shell makes for a tough and durable construction and provides excellent protection with help from the in-mold liner in polycarbonate and EPS. Sizes: XS – XXL

Helmet

Receptor BUG Communication

Additional Color

Tanner Hall

TJ Schiller

Anders Backe

Additional Colors

Accessory

Bankers Brim fits all of the Receptor BUG helmets.

It will protect your goggles from scratches and from snow or water running down the helmet.

16

17

The same helmet as the Receptor BUG but fitted with an extra safety design that meets communication and audio needs with the installed cell-phone hands free that is compatible with iPhone and other 3,5mm plug phones. The sound from the powerful Skullcandy™ drivers will make you want to wear the helmet instead of your normal head­phones also when off the slope.

Sizes: XS – XXL

Helmet

Pro Models

Receptor Bug

To make the Receptor BUG helmet, we’ve taken the most advanced multi-purpose helmet out there, the Receptor + and altered it especially for snow sports. The patented system with double overlapping shells lets air in and heat out and protects from sharp objects. Ventilation can also be closed for cold days. An advanced outer shell makes for a tough and durable construction and provides excellent protection with help from the in-mold liner in polycarbonate and EPS. Sizes: XS – XXL

Helmet

Receptor BUG Communication

Additional Color

Tanner Hall

TJ Schiller

Anders Backe

Additional Colors

Accessory

Bankers Brim fits all of the Receptor BUG helmets.

It will protect your goggles from scratches and from snow or water running down the helmet.

16

17

The same helmet as the Receptor BUG but fitted with an extra safety design that meets communication and audio needs with the installed cell-phone hands free that is compatible with iPhone and other 3,5mm plug phones. The sound from the powerful Skullcandy™ drivers will make you want to wear the helmet instead of your normal head­phones also when off the slope.

Sizes: XS – XXL

Helmet

Frontal

A free ride helmet with, apart from safety, the main focus on ventilation. The solution combines three different ventilation systems in a hybrid of hard shell and in mold helmet. Vent slots in the front to provide ventilation for goggles. Patented VDSAP, a double shell solution where air is transported between two layers of shell, to avoid direct wind and to withstand penetration from sharp objects. At the back, there are ventilation holes for the helmet to function as a chimney, where air is pulled from the front to the rear. Finally, there are six ventilation slots adjustable from the outside. The helmet has been developed in close collaboration with Jon Olsson. Sizes: S – XL

Technical features

Receptor +

Receptor+ is developed for multidisciplinary activities for those who are tired of storing various helmets around their home. The Receptor+ can be used on snow, bike, skateboard or in water and has the appropriate certifications for all three different environments. When it comes to safety and versatility the Receptor+ is unique. This is due to the patented VDSAP system with double overlapping shells and state of the art materials such as our in-molded aramid barrier together with a multi-impact SEPP liner. The included kit makes it easy to switch mode depending on the sport for the day. Sizes: S – XL

Technical features 01 Double-shell system.

01 VDSAP ventilation. The offset double shells provides ventilation and resistance to penetration.

02 Multi-Impact SEPP liner.

03 Penetration-proof ventilation system with airflow channels between the two shells.

02 Hard rim of injected plastic gives durability and is the foundation for the ventilation in the front and rear parts of the helmet.

04 Multi-purpose lining suitable for both liquid and frozen water.

05 Detachable winter-lining and earpieces.

03 In-mold upper part of the helmet. Provides excellent shock absorbtion.

06 Patent pending aramid penetration barrier system (APB).

04 Generous ventilation in the upper part of the helmet.

Adjustable from the outside by a sliding/turning mechanism.

03

05 Fit system in the rear part allows a simple way of adjusting the helmet’s size.

01

Helmet

06

01 04 05

04

02

03

02 05

Additional Colors

Additional Colors

Optional mode Wheels Shown without ear pads for biking, skateboard or other summer activities.

Water Additional ear pieces for water use made of sandwich molded EVA, to prevent bursting ear drums.

18

Pro Model

Compagnie Du Mont Blanc

Jon Olsson

The official ski patrol helmet.

19

Wheels

Accessory Receptor Communication The comfortable Receptor neckroll, upgraded with powerful drivers from Skullcandy. Solves communication and audio needs.

Water

Helmet

Frontal

A free ride helmet with, apart from safety, the main focus on ventilation. The solution combines three different ventilation systems in a hybrid of hard shell and in mold helmet. Vent slots in the front to provide ventilation for goggles. Patented VDSAP, a double shell solution where air is transported between two layers of shell, to avoid direct wind and to withstand penetration from sharp objects. At the back, there are ventilation holes for the helmet to function as a chimney, where air is pulled from the front to the rear. Finally, there are six ventilation slots adjustable from the outside. The helmet has been developed in close collaboration with Jon Olsson. Sizes: S – XL

Technical features

Receptor +

Receptor+ is developed for multidisciplinary activities for those who are tired of storing various helmets around their home. The Receptor+ can be used on snow, bike, skateboard or in water and has the appropriate certifications for all three different environments. When it comes to safety and versatility the Receptor+ is unique. This is due to the patented VDSAP system with double overlapping shells and state of the art materials such as our in-molded aramid barrier together with a multi-impact SEPP liner. The included kit makes it easy to switch mode depending on the sport for the day. Sizes: S – XL

Technical features 01 Double-shell system.

01 VDSAP ventilation. The offset double shells provides ventilation and resistance to penetration.

02 Multi-Impact SEPP liner.

03 Penetration-proof ventilation system with airflow channels between the two shells.

02 Hard rim of injected plastic gives durability and is the foundation for the ventilation in the front and rear parts of the helmet.

04 Multi-purpose lining suitable for both liquid and frozen water.

05 Detachable winter-lining and earpieces.

03 In-mold upper part of the helmet. Provides excellent shock absorbtion.

06 Patent pending aramid penetration barrier system (APB).

04 Generous ventilation in the upper part of the helmet.

Adjustable from the outside by a sliding/turning mechanism.

03

05 Fit system in the rear part allows a simple way of adjusting the helmet’s size.

01

Helmet

06

01 04 05

04

02

03

02 05

Additional Colors

Additional Colors

Optional mode Wheels Shown without ear pads for biking, skateboard or other summer activities.

Water Additional ear pieces for water use made of sandwich molded EVA, to prevent bursting ear drums.

18

Pro Model

Compagnie Du Mont Blanc

Jon Olsson

The official ski patrol helmet.

19

Wheels

Accessory Receptor Communication The comfortable Receptor neckroll, upgraded with powerful drivers from Skullcandy. Solves communication and audio needs.

Water

Helmet

Synapsis 2.0

The Synapsis helmet is developed to be ultra light, without sacrificing safety. In version 2.0, Synapsis is updated with a turnring adjustment system for improved fit. The unique manufacturing process of the Synapsis 2.0 makes it possible to make a very light helmet, still certified according the CE-1077 as well as ASTM standards. This has been achieved by using POC´s patent pending ballistic Anti Penetration Barrier, APB. In the injection process, the Aramid is placed between the thin outer shell and the liner. This makes the helmet withstand penetration despite its low weight. The optional visor is included. Sizes: S – XL

Technical features

Helmet

Skull Light

Technical features

01 1 mm Polycarbonate Shell.

01 Air flow.

02 In-mold aramid membrane between the shell and EPS prevents penetration through the thin shell.

02 Tapered shell.

03 Penetration-resistant air-vent cap.

04 LD Foam Lining. Comfortable foam padding that easily can be changed or removed for cleaning.

03 EPP Core. Made with enhanced mechanical properties.

04 Turnring adjustment system.

05 Light and detachable neckroll.

01

03 01

02

02

04

03

05 04

Additional Colors Optional mode

Additional Colors

Choose to wear the helmet with or without the visor.

Available in all colors.

Pro Model Aurélien Ducroz

All Black Editon

20

21

These helmets are developed in line with the technology of our Skull Helmets (see Skull Comp and Skull X) but are aimed specifically towards free ride skiers. The same semi-hard shell technology is used but Skull Light helmets are lighter and have detachable ear pads for those warm spring days. EPP liner for multi-impact performance. Sizes: XS – XXL

Helmet

Synapsis 2.0

The Synapsis helmet is developed to be ultra light, without sacrificing safety. In version 2.0, Synapsis is updated with a turnring adjustment system for improved fit. The unique manufacturing process of the Synapsis 2.0 makes it possible to make a very light helmet, still certified according the CE-1077 as well as ASTM standards. This has been achieved by using POC´s patent pending ballistic Anti Penetration Barrier, APB. In the injection process, the Aramid is placed between the thin outer shell and the liner. This makes the helmet withstand penetration despite its low weight. The optional visor is included. Sizes: S – XL

Technical features

Helmet

Skull Light

Technical features

01 1 mm Polycarbonate Shell.

01 Air flow.

02 In-mold aramid membrane between the shell and EPS prevents penetration through the thin shell.

02 Tapered shell.

03 Penetration-resistant air-vent cap.

04 LD Foam Lining. Comfortable foam padding that easily can be changed or removed for cleaning.

03 EPP Core. Made with enhanced mechanical properties.

04 Turnring adjustment system.

05 Light and detachable neckroll.

01

03 01

02

02

04

03

05 04

Additional Colors Optional mode

Additional Colors

Choose to wear the helmet with or without the visor.

Available in all colors.

Pro Model Aurélien Ducroz

All Black Editon

20

21

These helmets are developed in line with the technology of our Skull Helmets (see Skull Comp and Skull X) but are aimed specifically towards free ride skiers. The same semi-hard shell technology is used but Skull Light helmets are lighter and have detachable ear pads for those warm spring days. EPP liner for multi-impact performance. Sizes: XS – XXL

Helmet

Receptor Backcountry

Technical features

Targeted towards advanced free skiers riding in exposed environments, this helmet is a highly developed version of the proven Receptor construction. By incorporating MIPS® technology, the helmet will absorb not only the vertical part of impacts, but also the rotational violence which is a serious concern in the case of an oblique impact. This breakthrough patented technology allows the liner and outer shell to rotate in relation to each other, reducing the stress on the brain and ultimately resulting in a safer helmet than ever before. Receptor MIPS is also equipped with Recco® avalanche rescue system. Sizes: S – XL

Helmet

Cortex DH

Technical features

01 ABS/PC outer shell.

01 Carbon outer shell.

02 Thin PC inner shell.

02 Thin PC inner shell.

03 Multi impact liner.

03 Multi impact liner.

04 Aramid penetration barrier.

04 Aramid penetration barrier.

05 Ventilation through outer shell.

05 Ventilation through outer shell.

06 Ventilation through inner shell and liner.

06 Ventilation through inner shell and liner.

07 MIPS system, letting the outer shell and liner move in relation to each other and thereby reducing the rotational forces to the brain.

07 Ear chambers designed for balance and hearing.

08 Recco® avalanche rescue system.

07 04

02

08 Chin bar size and distance from face is optimized for protection without sacrificing easy breathing.

09 MIPS system, letting the outer shell and liner move in relation to each other and thereby reducing the rotational forces to the brain.

06 01

01 03

04

05

02

06 03

08

07

09

05

08

01 MIPS-system allows the shell to slide on top of the liner and do thereby reduce the rotational energy to the brain at impact.

01

01

Read more about the MIPS-system on page 9.

22

01

Read more about the MIPS-system on page 9.

23

A lightweight advanced carbon shell wrapped around our patent pending aramid reinforced in-mold liner. The liner has a thin shell of polycarbonate covering the multi-impact Super EPP core. The double overlapping shell design, our patented VDSAP, allows a fully ventilated construction for maximum comfort without sacrificing penetration resistance or impact energy management. The helmet is also equipped with the patented MIPS system to reduce the rotational forces on the brain in the case of an oblique impact. In the Cortex DH helmet, nothing has been neglected to attain the highest possible level of protection. Sizes: S/M, M/L & L/XL

Helmet

Receptor Backcountry

Technical features

Targeted towards advanced free skiers riding in exposed environments, this helmet is a highly developed version of the proven Receptor construction. By incorporating MIPS® technology, the helmet will absorb not only the vertical part of impacts, but also the rotational violence which is a serious concern in the case of an oblique impact. This breakthrough patented technology allows the liner and outer shell to rotate in relation to each other, reducing the stress on the brain and ultimately resulting in a safer helmet than ever before. Receptor MIPS is also equipped with Recco® avalanche rescue system. Sizes: S – XL

Helmet

Cortex DH

Technical features

01 ABS/PC outer shell.

01 Carbon outer shell.

02 Thin PC inner shell.

02 Thin PC inner shell.

03 Multi impact liner.

03 Multi impact liner.

04 Aramid penetration barrier.

04 Aramid penetration barrier.

05 Ventilation through outer shell.

05 Ventilation through outer shell.

06 Ventilation through inner shell and liner.

06 Ventilation through inner shell and liner.

07 MIPS system, letting the outer shell and liner move in relation to each other and thereby reducing the rotational forces to the brain.

07 Ear chambers designed for balance and hearing.

08 Recco® avalanche rescue system.

07 04

02

08 Chin bar size and distance from face is optimized for protection without sacrificing easy breathing.

09 MIPS system, letting the outer shell and liner move in relation to each other and thereby reducing the rotational forces to the brain.

06 01

01 03

04

05

02

06 03

08

07

09

05

08

01 MIPS-system allows the shell to slide on top of the liner and do thereby reduce the rotational energy to the brain at impact.

01

01

Read more about the MIPS-system on page 9.

22

01

Read more about the MIPS-system on page 9.

23

A lightweight advanced carbon shell wrapped around our patent pending aramid reinforced in-mold liner. The liner has a thin shell of polycarbonate covering the multi-impact Super EPP core. The double overlapping shell design, our patented VDSAP, allows a fully ventilated construction for maximum comfort without sacrificing penetration resistance or impact energy management. The helmet is also equipped with the patented MIPS system to reduce the rotational forces on the brain in the case of an oblique impact. In the Cortex DH helmet, nothing has been neglected to attain the highest possible level of protection. Sizes: S/M, M/L & L/XL

Helmet

Skull Comp 2.0

The ultimate race helmet, upgraded. The Skull Comp is now updated to version 2.0, adding a new unique safety feature. After finding that today’s race skiers repeatedly hit gates hard and risk to deform the liner, we shifted the core material to multi impact EPP. On top of the liner, we use a thin outer shell in combination with our patented Aramid membrane penetration barrier, APB. To optimize the energy absorption properties, pneumatic honeycomb pads made of polyurethane are inserted into the multi impact EPP liner. Great fit, performance and protection over and over again! Sizes: XS – XXL

Helmet

Super Skull Comp

Technical features

Technical features 01 LD Foam Lining. Comfortable foam padding that easily can be changed or removed for cleaning.

01 LD Foam Lining. Comfortable foam padding that easily can be changed or removed for cleaning.

02 Shell of injected PC/ABS, which is zoned and tapered.

02 Supracor™ honeycomb sandwich core. The honeycomb is integrated into the EPP liner for progressive energy absorption.

03 Supracor™ honeycomb sandwich core. The honeycomb is integrated into the EPP for progressive energy absorption.

03 Aramid membrane between the shell and EPP. Patent pending.

The aramid membrane prevents penetration through the thin shell, without decreasing the cushioning properties.

04 Aramid membrane between the shell and EPP. Patent pending.

The aramid membrane prevents penetration through the thin shell, without decreasing the cushioning properties.

04 EPP Core. Density is optimized to work perfectly with Supracor™.

05 EPP Core. Density is optimized to work perfectly with Supracor™.

05 Thin shell of a unique carbon fiber laminate, allowing the shell to be extremely thin and flexible and therefore more suitable to deconstruct on impact.

05

04

03

The Super Skull Comp is based on the Skull Comp 2.0 concept but with a carbon fiber shell.

Carbon shells have so far not been a very good solution in ski helmets since they become to stiff and thick which counteracts the performance wanted. The carbon shell in this case makes sense.

Thanks to a new industrial method, it is now possible for us to use a carbon shell, partly using a ductile matrix, making the shell flexy and very light. To withstand repeated hits from gates when racing, the Super Skull Comp is equipped with our new multi impact EPP liner. Sizes: M & L

01

02 03

02

01

04 05

Additional Colors Helmet case Protect your helmet with the custom-designed helmet case. Delivered with the Skull Comp and Super Skull Comp but suitable for all models.

Pro Models Bode Miller Julia Mancuso The Swedes.

(Maria Pietilä Holmner, Mattias Hargin and André Myhrer from the Swedish Ski Team.)

24

25

Helmet

Skull Comp 2.0

The ultimate race helmet, upgraded. The Skull Comp is now updated to version 2.0, adding a new unique safety feature. After finding that today’s race skiers repeatedly hit gates hard and risk to deform the liner, we shifted the core material to multi impact EPP. On top of the liner, we use a thin outer shell in combination with our patented Aramid membrane penetration barrier, APB. To optimize the energy absorption properties, pneumatic honeycomb pads made of polyurethane are inserted into the multi impact EPP liner. Great fit, performance and protection over and over again! Sizes: XS – XXL

Helmet

Super Skull Comp

Technical features

Technical features 01 LD Foam Lining. Comfortable foam padding that easily can be changed or removed for cleaning.

01 LD Foam Lining. Comfortable foam padding that easily can be changed or removed for cleaning.

02 Shell of injected PC/ABS, which is zoned and tapered.

02 Supracor™ honeycomb sandwich core. The honeycomb is integrated into the EPP liner for progressive energy absorption.

03 Supracor™ honeycomb sandwich core. The honeycomb is integrated into the EPP for progressive energy absorption.

03 Aramid membrane between the shell and EPP. Patent pending.

The aramid membrane prevents penetration through the thin shell, without decreasing the cushioning properties.

04 Aramid membrane between the shell and EPP. Patent pending.

The aramid membrane prevents penetration through the thin shell, without decreasing the cushioning properties.

04 EPP Core. Density is optimized to work perfectly with Supracor™.

05 EPP Core. Density is optimized to work perfectly with Supracor™.

05 Thin shell of a unique carbon fiber laminate, allowing the shell to be extremely thin and flexible and therefore more suitable to deconstruct on impact.

05

04

03

The Super Skull Comp is based on the Skull Comp 2.0 concept but with a carbon fiber shell.

Carbon shells have so far not been a very good solution in ski helmets since they become to stiff and thick which counteracts the performance wanted. The carbon shell in this case makes sense.

Thanks to a new industrial method, it is now possible for us to use a carbon shell, partly using a ductile matrix, making the shell flexy and very light. To withstand repeated hits from gates when racing, the Super Skull Comp is equipped with our new multi impact EPP liner. Sizes: M & L

01

02 03

02

01

04 05

Additional Colors Helmet case Protect your helmet with the custom-designed helmet case. Delivered with the Skull Comp and Super Skull Comp but suitable for all models.

Pro Models Bode Miller Julia Mancuso The Swedes.

(Maria Pietilä Holmner, Mattias Hargin and André Myhrer from the Swedish Ski Team.)

24

25

Helmet

Skull X

Technical features

If you spend long days in the mountains during a long season of skiing, you need an ultracomfortable and ultra modern helmet with the very latest technology and the right details.

In Skull X, great efforts has been made developing a ventilated helmet with excellent comfort and safety, with an EPP liner that withstands repetitive shocks, a thinner shell and penetrationproof ventilation. The Skull X is also an excellent race helmet for juniors. Sizes: XS – XXL

Helmet

Sinuse SL

This slalom helmet is equipped with POC’s patented double shell system, providing full ventilation and protection from penetration. Ventilation can be closed by an EVA insert.

The included chin bar is detachable and easily and quickly adjusted. Sizes: XS – XXL

Technical features

01 Air flow.

01 Double-shell system.

02 Multi impact EPP Core.

Made with enhanced mechanical properties.

02 EPS liner.

03 Penetration-proof ventilation system with airflow channels between the two shells.

03 LD Foam Lining. Comfortable foam padding that easily can be changed or removed for cleaning.

04 Detachable and adjustable chinbar.

03

01 02 01 03

02 04

Accessories Chin A chin guard for slalom skiing. Manufactured in precision-tooled aluminum.

Fits Skull Comp and Skull X. Jaw A chin guard for downhill, Ski Cross or extreme skiing. Made from reinforced ABS/PC. Fits Skull Comp and X. Bumper High density EVA that protects your forehead and helmet from slalom gates. Fits all Skull helmets.

Chin

Additional Colors

Jaw

Pro Models The Swedes. Maria Pietilä Holmner, Mattias Hargin and André Myhrer from the Swedish Ski Team.

Axel Bäck. Axel Bäcks pro model.

Bumper

26

27

Additional Color

Helmet

Skull X

Technical features

If you spend long days in the mountains during a long season of skiing, you need an ultracomfortable and ultra modern helmet with the very latest technology and the right details.

In Skull X, great efforts has been made developing a ventilated helmet with excellent comfort and safety, with an EPP liner that withstands repetitive shocks, a thinner shell and penetrationproof ventilation. The Skull X is also an excellent race helmet for juniors. Sizes: XS – XXL

Helmet

Sinuse SL

This slalom helmet is equipped with POC’s patented double shell system, providing full ventilation and protection from penetration. Ventilation can be closed by an EVA insert.

The included chin bar is detachable and easily and quickly adjusted. Sizes: XS – XXL

Technical features

01 Air flow.

01 Double-shell system.

02 Multi impact EPP Core.

Made with enhanced mechanical properties.

02 EPS liner.

03 Penetration-proof ventilation system with airflow channels between the two shells.

03 LD Foam Lining. Comfortable foam padding that easily can be changed or removed for cleaning.

04 Detachable and adjustable chinbar.

03

01 02 01 03

02 04

Accessories Chin A chin guard for slalom skiing. Manufactured in precision-tooled aluminum.

Fits Skull Comp and Skull X. Jaw A chin guard for downhill, Ski Cross or extreme skiing. Made from reinforced ABS/PC. Fits Skull Comp and X. Bumper High density EVA that protects your forehead and helmet from slalom gates. Fits all Skull helmets.

Chin

Additional Colors

Jaw

Pro Models The Swedes. Maria Pietilä Holmner, Mattias Hargin and André Myhrer from the Swedish Ski Team.

Axel Bäck. Axel Bäcks pro model.

Bumper

26

27

Additional Color

Helmets

POCito Skull

POCito Skull helmet derives from our Skull racing helmets, but with modified properties optimized for kids. This helmet has a softer lining, which provides much better shock absorption at lower speeds and force. The helmet also has adjustable sizing, which allows the child to grow with the helmet.

At the back of the goggle clip there is a panel where parents contact information and emergency medical information can be noted. Mounted beneath the shell, there is a Recco® avalanche rescue reflector. For maximum visibility in daylight and twilight, the helmet is fluorescent orange or pink and has reflective stickers. A detachable LED lamp is included. Adjustable size from 51–54.

Additional color

Helmets

POCito Light

Additional color

Accessories

Adjustable Sizing Grow with the helmet.

28

LED Alert Blinking LED device to avoid being run into.

Supplied with the helmet.

Name Tag for writing down parent’s contact and emergency information.

POCito Bib in florescent orange and reflectors. To be worn over the jacket for increased visibility.

Supplied with the helmet.

29

The POCito Light helmet is a sought after addition to complement the POCito Skull. The basic features such as the increased visibility thanks to the fluorescent color and the reflective patches as well as the structure being optimized for smaller heads and lower speeds has been inherited from POCito Skull. The soft ear pads make a lighter construction and adds comfort and the adjustable sizing allows the kid to grow with the helmet. Adjustable from size 51–54, M-L.

Helmets

POCito Skull

POCito Skull helmet derives from our Skull racing helmets, but with modified properties optimized for kids. This helmet has a softer lining, which provides much better shock absorption at lower speeds and force. The helmet also has adjustable sizing, which allows the child to grow with the helmet.

At the back of the goggle clip there is a panel where parents contact information and emergency medical information can be noted. Mounted beneath the shell, there is a Recco® avalanche rescue reflector. For maximum visibility in daylight and twilight, the helmet is fluorescent orange or pink and has reflective stickers. A detachable LED lamp is included. Adjustable size from 51–54.

Additional color

Helmets

POCito Light

Additional color

Accessories

Adjustable Sizing Grow with the helmet.

28

LED Alert Blinking LED device to avoid being run into.

Supplied with the helmet.

Name Tag for writing down parent’s contact and emergency information.

POCito Bib in florescent orange and reflectors. To be worn over the jacket for increased visibility.

Supplied with the helmet.

29

The POCito Light helmet is a sought after addition to complement the POCito Skull. The basic features such as the increased visibility thanks to the fluorescent color and the reflective patches as well as the structure being optimized for smaller heads and lower speeds has been inherited from POCito Skull. The soft ear pads make a lighter construction and adds comfort and the adjustable sizing allows the kid to grow with the helmet. Adjustable from size 51–54, M-L.

Body

About

Better body protection As a result of our collaboration with specialists in spinal cord injuries, riders of all kinds and experts in material and

construction, we have come to the conclusion that many of the protectors on the market have serious weaknesses. the challenge is to come up with a flexible, comfortable protection that really does the work! Many back protectors out

there are lightweight, but less good when it comes to shock absorption and really protecting your spinal area. We are very happy to present two different concepts of back protections; VPD and Multi-impact hard shell system, both as a result of different needs of riders and state of art materials and constructions.

Our VPD protector works progressively, adapts itself to the force of the impact and is the most flexible back protector out there.

Visco-Elastic Polymer Dough

An individual system

poc uses a compound and technology in our most shock-

we have a flexible patented back-protection system which allows you to choose your protection degree from various components. This means you can tailor the degree of protection, depending on how you ride for the day or to meet different rules and restrictions applying to the competition you enter. With the Cervical and Coccyx you can be sure to gain protection for the upper part of the spine, including vertebrae C1 – C7, as well as the lowest part including the caudal area. The uppermost part of the spine – the vertebrae C1 – C7, is the most important region to protect as damages here may result in serious irreparable injury or even death.

absorbing back protector called VPD (Visco-Elastic Polymer Dough). This protector is one of few on the market that reaches the highest standard (Level 2 “High performance”) of the CE 1621-2 motorcycle standard. the material is highly dampening, using a modified

Polyurethane foam that is soft, comfortable and adapts to create an individual fit. However, when exposed to impact the material stiffens and has extreme energy absorption properties. Most of the protector systems available on the market are designed to just pass the specific CE-Norm test.

However, this means that low energy impacts are transferred almost directly to the body. Our VPD back protector functions progressively and adapts itself to the force of the impact.

a dual density combination, with extra protection covering the spinal area. This way we maximize both the freedom of movement and the shock absorbing characteristic of the protection.

possible level of protection, we have also done everything we can to make the armor as comfortable to wear as possible.

You will feel how the protection anatomically and ergonomically follows the shape of your back. At the same time, the protec­tion is supple, giving you complete freedom of movement. Another major advantage of the POC armor is the highly efficient ventilation technology.

Multi impact hard shell system

to sum it all up, POC’s back protection will give you

to maximize energy absorption POC’s back armor with hard

unsurpassed levels of comfort and safety. Looking at our range we hope that you will find a product for your personal need, regardless of how you like to ride, whether it be DH racing or pulling back flips in the park.

to further improve properties the back protector has

panel shields has a multi impact core. Unlike many other back protectors, the EPP and EVA cores also with- stands multi-impact without losing the energy absorbing abilities.

30

the armor is not only designed to give you the highest

31

Body

About

Better body protection As a result of our collaboration with specialists in spinal cord injuries, riders of all kinds and experts in material and

construction, we have come to the conclusion that many of the protectors on the market have serious weaknesses. the challenge is to come up with a flexible, comfortable protection that really does the work! Many back protectors out

there are lightweight, but less good when it comes to shock absorption and really protecting your spinal area. We are very happy to present two different concepts of back protections; VPD and Multi-impact hard shell system, both as a result of different needs of riders and state of art materials and constructions.

Our VPD protector works progressively, adapts itself to the force of the impact and is the most flexible back protector out there.

Visco-Elastic Polymer Dough

An individual system

poc uses a compound and technology in our most shock-

we have a flexible patented back-protection system which allows you to choose your protection degree from various components. This means you can tailor the degree of protection, depending on how you ride for the day or to meet different rules and restrictions applying to the competition you enter. With the Cervical and Coccyx you can be sure to gain protection for the upper part of the spine, including vertebrae C1 – C7, as well as the lowest part including the caudal area. The uppermost part of the spine – the vertebrae C1 – C7, is the most important region to protect as damages here may result in serious irreparable injury or even death.

absorbing back protector called VPD (Visco-Elastic Polymer Dough). This protector is one of few on the market that reaches the highest standard (Level 2 “High performance”) of the CE 1621-2 motorcycle standard. the material is highly dampening, using a modified

Polyurethane foam that is soft, comfortable and adapts to create an individual fit. However, when exposed to impact the material stiffens and has extreme energy absorption properties. Most of the protector systems available on the market are designed to just pass the specific CE-Norm test.

However, this means that low energy impacts are transferred almost directly to the body. Our VPD back protector functions progressively and adapts itself to the force of the impact.

a dual density combination, with extra protection covering the spinal area. This way we maximize both the freedom of movement and the shock absorbing characteristic of the protection.

possible level of protection, we have also done everything we can to make the armor as comfortable to wear as possible.

You will feel how the protection anatomically and ergonomically follows the shape of your back. At the same time, the protec­tion is supple, giving you complete freedom of movement. Another major advantage of the POC armor is the highly efficient ventilation technology.

Multi impact hard shell system

to sum it all up, POC’s back protection will give you

to maximize energy absorption POC’s back armor with hard

unsurpassed levels of comfort and safety. Looking at our range we hope that you will find a product for your personal need, regardless of how you like to ride, whether it be DH racing or pulling back flips in the park.

to further improve properties the back protector has

panel shields has a multi impact core. Unlike many other back protectors, the EPP and EVA cores also with- stands multi-impact without losing the energy absorbing abilities.

30

the armor is not only designed to give you the highest

31

Body Armor Spine VPD Tee

A short sleeve jacket with shoulder-cups, breast plates and a back protector. One of few certified at Level 2 (“High performance�) of the motor cycle standard EN 1621-2.

This back protector concept is made of Visco-Elastic Polymer Dough (VPD) that provides a high level of protection as well as a unique capability to adapt its shape to your body. The ambition has been to support mobility and comfort, incorporating the highest possible level of spinal and torso protection. Sizes: XS/S, M, L/XL

Body Armor Spine VPD Vest

There are various ways to wear a back protector, this is the option that gives you the greatest flexibility and freedom of movement. Choose how to wear it, with or without the removable waistband. VPD (visco-elastic-polymer-dough) has amazing energyabsorbing properties. The material is extremely agile and soft but as energy or force is applied, the material stiffens and becomes rock hard. The back protector is inserted in a washable vest and easily removable. Sizes: All sizes XXS, XS/S, M, L/XL are available in regular and slim fit.

Technical features 01 Breathable mesh for ventilation.

02 Ventilated Polypropylene shoulder protection.

03 Ventilated Polypropylene breast plate.

04 Removable and flexible waistband.

05 Snap-on Cervical and Coccyx in sandwich-molded and lined polyethylene. Patent-pending.

Technical features 01 Extra layer of high density ViscoElastic Polymer Dough (VPD) in spinal area for maximum protection.

05 02

01

02 Low density VPD for flexibility.

03 Ventilation holes.

03

04

FLEXIBLE

WAIST

BAND

05 01 02

03

Technical features 01 Extra layer of high density ViscoElastic Polymer Dough (VPD) in spinal area for maximum protection.

02 Low density VPD for flexibility.

03 Ventilation holes.

Our VPD back protector outperform the EN 1621-2 standard Level 1 (18kN) reaching the higher Level 2 requirements (9kN). Still many CE approved protection systems are constructed to just pass the specific CE-Norm test. This means that low energy impacts are transferred almost directly to the body. Our VPD back protector does not only exceed the required shock absorbance CE-values, it also releases the energy gradually so the spine will not be exposed to any force peaks.

01

force (kn) 02

21 CE Level 1

POCito VPD Spine

Spine VPD FIS

The POCito vest is identical to the adult VPD vest but without the waistband.

Sizes: S, L

The construction is kept simple in a strict racing spirit.

This is the solution if you want to wear the new VPD back protection according to the FIS rules and regulations.

Sizes: XXS, XS/S, M & L/XL

Min. level for CE approval

15,0 03

12,0

Spine VPD WFL Vest

CE Level 2

POC VPD

6,0 3,0 0,0 -3,0 1,0 2,0

32

3,0 4,0

5,0

6,0 7,0

8,0

9,0 10,0 time (ms)

For every sold WFL Vest, POC supports the Wings For Life Spinal Cord Research Foundation. Please visit www. wingsforlife.com for more info. Same specs as Spine VPD Vest except sizes, comes in Regular XS/S, M, L/XL. 33

Spine VPD WO Vest The vastly cherished Vest in a Women specific version. Fit has been crucial in the design and resulted in a low front neck cut, exclusion of grippy waistband due to the issue of protectors climbing up your back.

Body Armor Spine VPD Tee

A short sleeve jacket with shoulder-cups, breast plates and a back protector. One of few certified at Level 2 (“High performance�) of the motor cycle standard EN 1621-2.

This back protector concept is made of Visco-Elastic Polymer Dough (VPD) that provides a high level of protection as well as a unique capability to adapt its shape to your body. The ambition has been to support mobility and comfort, incorporating the highest possible level of spinal and torso protection. Sizes: XS/S, M, L/XL

Body Armor Spine VPD Vest

There are various ways to wear a back protector, this is the option that gives you the greatest flexibility and freedom of movement. Choose how to wear it, with or without the removable waistband. VPD (visco-elastic-polymer-dough) has amazing energyabsorbing properties. The material is extremely agile and soft but as energy or force is applied, the material stiffens and becomes rock hard. The back protector is inserted in a washable vest and easily removable. Sizes: All sizes XXS, XS/S, M, L/XL are available in regular and slim fit.

Technical features 01 Breathable mesh for ventilation.

02 Ventilated Polypropylene shoulder protection.

03 Ventilated Polypropylene breast plate.

04 Removable and flexible waistband.

05 Snap-on Cervical and Coccyx in sandwich-molded and lined polyethylene. Patent-pending.

Technical features 01 Extra layer of high density ViscoElastic Polymer Dough (VPD) in spinal area for maximum protection.

05 02

01

02 Low density VPD for flexibility.

03 Ventilation holes.

03

04

FLEXIBLE

WAIST

BAND

05 01 02

03

Technical features 01 Extra layer of high density ViscoElastic Polymer Dough (VPD) in spinal area for maximum protection.

02 Low density VPD for flexibility.

03 Ventilation holes.

Our VPD back protector outperform the EN 1621-2 standard Level 1 (18kN) reaching the higher Level 2 requirements (9kN). Still many CE approved protection systems are constructed to just pass the specific CE-Norm test. This means that low energy impacts are transferred almost directly to the body. Our VPD back protector does not only exceed the required shock absorbance CE-values, it also releases the energy gradually so the spine will not be exposed to any force peaks.

01

force (kn) 02

21 CE Level 1

POCito VPD Spine

Spine VPD FIS

The POCito vest is identical to the adult VPD vest but without the waistband.

Sizes: S, L

The construction is kept simple in a strict racing spirit.

This is the solution if you want to wear the new VPD back protection according to the FIS rules and regulations.

Sizes: XXS, XS/S, M & L/XL

Min. level for CE approval

15,0 03

12,0

Spine VPD WFL Vest

CE Level 2

POC VPD

6,0 3,0 0,0 -3,0 1,0 2,0

32

3,0 4,0

5,0

6,0 7,0

8,0

9,0 10,0 time (ms)

For every sold WFL Vest, POC supports the Wings For Life Spinal Cord Research Foundation. Please visit www. wingsforlife.com for more info. Same specs as Spine VPD Vest except sizes, comes in Regular XS/S, M, L/XL. 33

Spine VPD WO Vest The vastly cherished Vest in a Women specific version. Fit has been crucial in the design and resulted in a low front neck cut, exclusion of grippy waistband due to the issue of protectors climbing up your back.

Body Armor Spine Ergo

Technical features 01

The Spine Ergo is a lightweight back protector with shoulder straps and a height adjustable flexible waistband system for the best individual fit. The back plates are made of Polypropylene and have an inner shock-absorbing core made of multi impact EPP. Thanks to the Air Induction System that transports moisture and lets fresh air flow in, it has great ventilation. Spine Ergo is the alternative if you prefer to use a light weight hard shell protection with multi-impact shock absorbing properties. The Spine Ergo is compatible with Cervical and Coccyx modules to extend the protective area. Sizes: XS/S, M, L/XL

Body Armor Spine Ergo Bug Accessories

Shock absorbing multi impact EPP core inside the shields.

02 Flexible, breathable waistband.

03 Height adjustable waist band system.

The patent pending extra attachments for complete back protection are called Cervical and Coccyx.

04 Snap-on Cervical top in sandwich-molded and lined polyethylene. Patent-pending.

05 Air induction system for outstanding ventilation.

06 Shields of injected Polypropylene.

Prevents penetration, spreads impact.

07 Snap on Coccyx bottom.

Patent pending.

Cervical A ‘must’ – according to us and to our medical experts.

This extra shield, made from a sandwich construction of heat-molded foam, protects the top part of the spine from vertebrae C1 to C7. You can easily snap-fit it to the Spine range products.

04

01

-20mm

-10mm

-20mm

05

0mm

WAIST

02

WAIST

A D J U S TA B L E

03

-10mm

A D J U S TA B L E

BAND

0mm

BAND

0mm

0mm

+10mm

+10mm

+20mm

+20mm

06

Designed and engineered by POC Sweden

07

Coccyx At last you can also protect the lowest part of your spine – the caudal region – from impact and resulting pain!

Coccyx snaps onto the Spine Ergo backshield just as easily as the Cervical and is made from a similar sandwich construction of heat-molded foam.

34

35

The basic construction is borrowed from our groundbreaking Spine Ergo protector. The ergonomic shape and high level of protection is unchanged from the original while the cushion is made of comfortable and flexible EVA. The Spine Ergo BUG is compatible with Cervical and Coccyx modules to extend the protective area. Sizes: XS/S, M, L/XL

Body Armor Spine Ergo

Technical features 01

The Spine Ergo is a lightweight back protector with shoulder straps and a height adjustable flexible waistband system for the best individual fit. The back plates are made of Polypropylene and have an inner shock-absorbing core made of multi impact EPP. Thanks to the Air Induction System that transports moisture and lets fresh air flow in, it has great ventilation. Spine Ergo is the alternative if you prefer to use a light weight hard shell protection with multi-impact shock absorbing properties. The Spine Ergo is compatible with Cervical and Coccyx modules to extend the protective area. Sizes: XS/S, M, L/XL

Body Armor Spine Ergo Bug Accessories

Shock absorbing multi impact EPP core inside the shields.

02 Flexible, breathable waistband.

03 Height adjustable waist band system.

The patent pending extra attachments for complete back protection are called Cervical and Coccyx.

04 Snap-on Cervical top in sandwich-molded and lined polyethylene. Patent-pending.

05 Air induction system for outstanding ventilation.

06 Shields of injected Polypropylene.

Prevents penetration, spreads impact.

07 Snap on Coccyx bottom.

Patent pending.

Cervical A ‘must’ – according to us and to our medical experts.

This extra shield, made from a sandwich construction of heat-molded foam, protects the top part of the spine from vertebrae C1 to C7. You can easily snap-fit it to the Spine range products.

04

01

-20mm

-10mm

-20mm

05

0mm

WAIST

02

WAIST

A D J U S TA B L E

03

-10mm

A D J U S TA B L E

BAND

0mm

BAND

0mm

0mm

+10mm

+10mm

+20mm

+20mm

06

Designed and engineered by POC Sweden

07

Coccyx At last you can also protect the lowest part of your spine – the caudal region – from impact and resulting pain!

Coccyx snaps onto the Spine Ergo backshield just as easily as the Cervical and is made from a similar sandwich construction of heat-molded foam.

34

35

The basic construction is borrowed from our groundbreaking Spine Ergo protector. The ergonomic shape and high level of protection is unchanged from the original while the cushion is made of comfortable and flexible EVA. The Spine Ergo BUG is compatible with Cervical and Coccyx modules to extend the protective area. Sizes: XS/S, M, L/XL

Body Armor Shins WC

Shins Classic The classic shin guard for slalom, made in durable HDPE. Comfort lining in EVA and sturdy velcro straps. Cutting marks to adjust length.

These long carbon shin guards cover the two upper buckles of the ski boot. The guards will sometimes save a run by preventing buckles being knocked open by the gates and can also cut a few hundredths off your time in your chase for the podium. Sizes: S. L

Body Armor Full Arm Jacket Joint VPD Elbow The elbow version of our soft VPD protection, highly pre bent shape and with a core that will adapt to your body. It will provide you with both comfort and security. Sizes: S, M, L

Forearm Classic Ergonomic and padded forearm protector in HDPE which is compatible with the cuff system of the all new Palm Comp 2.0 race glove.

Cutting marks to adjust length.

Joint VPD Knee Soft knee protection made of stretchy Aramid fabric and VPD that is simply as comfortable as it gets but at the same time providing excellent shock absorbance.

Sizes: S, M, L

Hip VPD Ski Shorts Protection shorts with flexible hip protection pads in and tailbone protection made of VPD, for the lowest spinal area – the Caudal region. Sizes: XS/S, M, L/XL

36

37

We have created a comfortable and adaptive protective jacket to uphold the level of protection for your arms. The flexible mesh vest includes both the LDPE forearm protection and an EVA foam upper arm protection with a 3D mesh for maximum ventilation. Sizes: XS/S, M, L/XL are available in a senior and a junior version.

Body Armor Shins WC

Shins Classic The classic shin guard for slalom, made in durable HDPE. Comfort lining in EVA and sturdy velcro straps. Cutting marks to adjust length.

These long carbon shin guards cover the two upper buckles of the ski boot. The guards will sometimes save a run by preventing buckles being knocked open by the gates and can also cut a few hundredths off your time in your chase for the podium. Sizes: S. L

Body Armor Full Arm Jacket Joint VPD Elbow The elbow version of our soft VPD protection, highly pre bent shape and with a core that will adapt to your body. It will provide you with both comfort and security. Sizes: S, M, L

Forearm Classic Ergonomic and padded forearm protector in HDPE which is compatible with the cuff system of the all new Palm Comp 2.0 race glove.

Cutting marks to adjust length.

Joint VPD Knee Soft knee protection made of stretchy Aramid fabric and VPD that is simply as comfortable as it gets but at the same time providing excellent shock absorbance.

Sizes: S, M, L

Hip VPD Ski Shorts Protection shorts with flexible hip protection pads in and tailbone protection made of VPD, for the lowest spinal area – the Caudal region. Sizes: XS/S, M, L/XL

36

37

We have created a comfortable and adaptive protective jacket to uphold the level of protection for your arms. The flexible mesh vest includes both the LDPE forearm protection and an EVA foam upper arm protection with a 3D mesh for maximum ventilation. Sizes: XS/S, M, L/XL are available in a senior and a junior version.

Optics

About

Optics

w

ith the experience gained in goggle optics, POC decided to take the next step with the conviction that we would also be able to make a difference in the field of high performance sun and action specs.

Both goggles and performance optics are developed to optimize need, function and protection, depending on activity and

conditions. Along with protecting your eyes from snow, ice, rain, slipstream, UV-rays, branches etc as well as assisting your vision in different light conditions, we have worked on optimizing the field of view, for better periphery perception, fast reaction and therefore promoting safety.

All goggles have a cellulose propionate inner lens to optimize anti fog properties. Double lenses have an outer Polycarbonate

lens for durability and penetration resistance. All POC lenses have a state of the art anti-scratch and anti-fog treatment.

NXT lenses ARE USED IN The performance specs and goGgles, initially developed for fighter jet canopies. The properties include extreme impact, temperature and chemical resistance, together with superior optical performance versus existing technologies, i.e polycarbonate.

Concepts and evolution within POC Optics Since different properties are prioritized for different users, POC has developed and employs a range of lens types in their goggles and sunglasses.

Injected goggle lenses

These double lenses for goggles have the outer lens injection molded. This allows for great variation of the shape and geometry, allowing optimized coverage and 3D shape of the lens. This results in better field of vision as well as better optics, since the shape can be optimized for the frame and the resulting distance from the wearer’s eyes.

Die-cut goggle lenses

This type of double lens is die-cut. This means that the lenses are cut out from a sheet, allowing for a highly efficient production process plus great possibilities to change the tint and VLT of the lenses.

38

39

Anti-fog protected single goggle lenses

Race skiers demand minimum refraction error, which is why race-specific lenses are made using only a single lens. Single lenses are generally known to have poor anti-fog protection, but the base material and coatings chosen for POC´s race goggles are the best available.

NXT lenses for sun and performance glasses

POC EYES sun and performance glasses are all equipped with the patented NXT polymer, which has exceptional properties when it comes to durability, weight and optical properties. The sunglasses are also equipped with state of the art technologies such as the patented color vision boosting filter HCD (high chromatic definition), photochromatic filter and advanced polarization.

For this season POC is also introducing the NXT technology in goggles. That is the same technology used in our performance and protective sunglasses.

The new Retina series, as well as one edition of Corneas and Iris, will all use the technology.

Beyond the size of the head and circumference, there are all different shapes, long, narrow, hemispheric and God knows all variations of heads. And then there are foreheads, noses, cheek’s, you get the picture.

That’s why the combo helmet and goggle will always be individual. Normally, about 70% would say that a pair of POC goggles fit perfectly with a POC helmet. To reach 100% POC has developed a new mid size goggle, Retina, and also adding more sizes among current goggle models.

Optics

About

Optics

w

ith the experience gained in goggle optics, POC decided to take the next step with the conviction that we would also be able to make a difference in the field of high performance sun and action specs.

Both goggles and performance optics are developed to optimize need, function and protection, depending on activity and

conditions. Along with protecting your eyes from snow, ice, rain, slipstream, UV-rays, branches etc as well as assisting your vision in different light conditions, we have worked on optimizing the field of view, for better periphery perception, fast reaction and therefore promoting safety.

All goggles have a cellulose propionate inner lens to optimize anti fog properties. Double lenses have an outer Polycarbonate

lens for durability and penetration resistance. All POC lenses have a state of the art anti-scratch and anti-fog treatment.

NXT lenses ARE USED IN The performance specs and goGgles, initially developed for fighter jet canopies. The properties include extreme impact, temperature and chemical resistance, together with superior optical performance versus existing technologies, i.e polycarbonate.

Concepts and evolution within POC Optics Since different properties are prioritized for different users, POC has developed and employs a range of lens types in their goggles and sunglasses.

Injected goggle lenses

These double lenses for goggles have the outer lens injection molded. This allows for great variation of the shape and geometry, allowing optimized coverage and 3D shape of the lens. This results in better field of vision as well as better optics, since the shape can be optimized for the frame and the resulting distance from the wearer’s eyes.

Die-cut goggle lenses

This type of double lens is die-cut. This means that the lenses are cut out from a sheet, allowing for a highly efficient production process plus great possibilities to change the tint and VLT of the lenses.

38

39

Anti-fog protected single goggle lenses

Race skiers demand minimum refraction error, which is why race-specific lenses are made using only a single lens. Single lenses are generally known to have poor anti-fog protection, but the base material and coatings chosen for POC´s race goggles are the best available.

NXT lenses for sun and performance glasses

POC EYES sun and performance glasses are all equipped with the patented NXT polymer, which has exceptional properties when it comes to durability, weight and optical properties. The sunglasses are also equipped with state of the art technologies such as the patented color vision boosting filter HCD (high chromatic definition), photochromatic filter and advanced polarization.

For this season POC is also introducing the NXT technology in goggles. That is the same technology used in our performance and protective sunglasses.

The new Retina series, as well as one edition of Corneas and Iris, will all use the technology.

Beyond the size of the head and circumference, there are all different shapes, long, narrow, hemispheric and God knows all variations of heads. And then there are foreheads, noses, cheek’s, you get the picture.

That’s why the combo helmet and goggle will always be individual. Normally, about 70% would say that a pair of POC goggles fit perfectly with a POC helmet. To reach 100% POC has developed a new mid size goggle, Retina, and also adding more sizes among current goggle models.

Goggles

Retina

Double lensed goggle designed for good ventilation and a wide angle of view to improve reaction time and overall active safety. Comes with a high quality PC lens with excellent anti-fog and anti-scratch treatment. The NXT version comes with a lens that gives outstanding optical properties, this lens material takes clarity and high definition within goggles to a new dimension and have a superb oleophobic/hydrophobic treatment. One size.

Additional Colors

Goggles

Cornea

The patent pended Cornea is based on the POC innovation of attaching the lens on the outside of the frame, to enlarge the field of view. Cornea has extension bars which gives a much better fit to the face. The lens is a perfectly shaped, injected cylindrical PC screen for superb optical qualities.

To avoid steaming the inner lens is made of CP and laminated exactly parallel to the outer lens.

Lenses are anti-fog and anti-scratch treated. Comes in one NXT Photochromatic Edition. One size.

Additional Colors

Retina WO Goggles with a specific face foam fit designed exclusively for Women. PC lens with anti-fog and anti-scratch treatment. One size.

All Black Edition

40

41

Goggles

Retina

Double lensed goggle designed for good ventilation and a wide angle of view to improve reaction time and overall active safety. Comes with a high quality PC lens with excellent anti-fog and anti-scratch treatment. The NXT version comes with a lens that gives outstanding optical properties, this lens material takes clarity and high definition within goggles to a new dimension and have a superb oleophobic/hydrophobic treatment. One size.

Additional Colors

Goggles

Cornea

The patent pended Cornea is based on the POC innovation of attaching the lens on the outside of the frame, to enlarge the field of view. Cornea has extension bars which gives a much better fit to the face. The lens is a perfectly shaped, injected cylindrical PC screen for superb optical qualities.

To avoid steaming the inner lens is made of CP and laminated exactly parallel to the outer lens.

Lenses are anti-fog and anti-scratch treated. Comes in one NXT Photochromatic Edition. One size.

Additional Colors

Retina WO Goggles with a specific face foam fit designed exclusively for Women. PC lens with anti-fog and anti-scratch treatment. One size.

All Black Edition

40

41

Goggles

Lobes

Goggles with a huge lens to optimize the field of view. The inspiration comes from Swedish architect Sigurd Lewerentz, who put his windows outside the facades and from astronaut Neil Armstrong. To minimize optical distortion the Lobes lens is a perfectly shaped spherical surface.

The lens is made of polycarbonate, perfectly tapered in thickness and cut to shape using computerized numerical control. Another thinner sheet of cellulose propionate is applied to the inside.

Lenses are anti-fog and anti-scratch treated. One size.

Additional Colors

Goggles

Iris Comp

Additional Color

Advanced ski goggles for those who demand high precision with no risk of optical distortion.

This is vital for competitive skiers in particular. Iris Comp comes with three single-lenses supplied as a standard – clear, blue, and smokey yellow – to give you the best possible perception of the surroundings in different light conditions on the slope. There is also a smaller size for smaller faces.

Lenses are anti-fog and anti-scratch treated. Sizes: S, L

Pro Models Julia Mancuso Signature Series Julia has designed her own JMS Iris Comp goggles for use in the WC and World Championships.

Size: S

Goggle case To protect your goggles when you are not riding, keep them in a perfectly shaped case made of EVA. Fits all our goggles.

All Black Edition

42

43

The Swedes. POC collaborates with young and talented Maria Pietilä Holmner, Mattias Hargin and André Myhrer from the Swedish Ski Team.They all have the capability of winning gold in the WC and we will do the best we can to support their challenge.

Sizes: S, L

Included Three different lenses are included when you buy Iris Comp.

Goggles

Lobes

Goggles with a huge lens to optimize the field of view. The inspiration comes from Swedish architect Sigurd Lewerentz, who put his windows outside the facades and from astronaut Neil Armstrong. To minimize optical distortion the Lobes lens is a perfectly shaped spherical surface.

The lens is made of polycarbonate, perfectly tapered in thickness and cut to shape using computerized numerical control. Another thinner sheet of cellulose propionate is applied to the inside.

Lenses are anti-fog and anti-scratch treated. One size.

Additional Colors

Goggles

Iris Comp

Additional Color

Advanced ski goggles for those who demand high precision with no risk of optical distortion.

This is vital for competitive skiers in particular. Iris Comp comes with three single-lenses supplied as a standard – clear, blue, and smokey yellow – to give you the best possible perception of the surroundings in different light conditions on the slope. There is also a smaller size for smaller faces.

Lenses are anti-fog and anti-scratch treated. Sizes: S, L

Pro Models Julia Mancuso Signature Series Julia has designed her own JMS Iris Comp goggles for use in the WC and World Championships.

Size: S

Goggle case To protect your goggles when you are not riding, keep them in a perfectly shaped case made of EVA. Fits all our goggles.

All Black Edition

42

43

The Swedes. POC collaborates with young and talented Maria Pietilä Holmner, Mattias Hargin and André Myhrer from the Swedish Ski Team.They all have the capability of winning gold in the WC and we will do the best we can to support their challenge.

Sizes: S, L

Included Three different lenses are included when you buy Iris Comp.

Goggles

Additional Colors

44

Iris Bug

Triple-layer face foam, advanced polycarbonate/cellulose propionate double-lens that look stunning, has a soft conforming polyurethane frame and high-quality straps with silicone on the inside for grip.

Iris BUG has all the features you can expect from a pair of POC goggles. Lenses are anti-fog and anti-scratch treated. Sizes: S, L.

BUG

S E R I E S

BUG

S E R I E S

Goggles

Iris X

Additional Colors

45

Double lensed goggles with splendid optical qualities for those who demand good vision and durability in any situation. In principle, Iris X will never steam up, even with major changes in air humidity and temperature. There is also a smaller size for smaller faces. Lenses are anti-fog and anti-scratch treated. Sizes: S, L

Goggles

Additional Colors

44

Iris Bug

Triple-layer face foam, advanced polycarbonate/cellulose propionate double-lens that look stunning, has a soft conforming polyurethane frame and high-quality straps with silicone on the inside for grip.

Iris BUG has all the features you can expect from a pair of POC goggles. Lenses are anti-fog and anti-scratch treated. Sizes: S, L.

BUG

S E R I E S

BUG

S E R I E S

Goggles

Iris X

Additional Colors

45

Double lensed goggles with splendid optical qualities for those who demand good vision and durability in any situation. In principle, Iris X will never steam up, even with major changes in air humidity and temperature. There is also a smaller size for smaller faces. Lenses are anti-fog and anti-scratch treated. Sizes: S, L

Goggles

POCito Iris

The POCito Iris goggles are identical to POC´s adult Iris goggles, just smaller. The double lens has an outer PC lens for penetration resistance and inner lens of cellulose propionate plastic to prevent fogging. The color is fluorescent orange or pink with reflective patches on the straps.

Lenses are anti-fog and anti-scratch treated. One size.

Additional Color

46

Enter the ”Best POCito memory” competition at www.pocsports.com

Goggles

POCito Iris

The POCito Iris goggles are identical to POC´s adult Iris goggles, just smaller. The double lens has an outer PC lens for penetration resistance and inner lens of cellulose propionate plastic to prevent fogging. The color is fluorescent orange or pink with reflective patches on the straps.

Lenses are anti-fog and anti-scratch treated. One size.

Additional Color

46

Enter the ”Best POCito memory” competition at www.pocsports.com

About

Lenses

About

Lenses

VLT – Visible Light Transmission

A measurement that specifies the percentage of light coming through the lens and reaching your eyes, a totally clear lens for

dark conditions typically have around 90% VLT and a very dark colored lens with mirror for sunny conditions may have down to 10% VLT. Most allround lenses will be found between 30 to 60 %. In the range of POC goggles you will find alternatives for all kinds of conditions.

Please note that the Visible Light Transmission for one tint can differ a bit if the lens has a single or double construction and if it has a spherical or cylindrical shape.

Colors vs. light conditions

Black VLT 12–14

Bronze/Blue mirror VLT 24

Black tint, ideal for very bright and sunny conditions.

Brown base tint with a blue reflective coating for sunny conditions.

Cornea // Lobes

Iris X

Orange VLT 28-55

Brightens details while boosting depth perception in flat light conditions. Also avai­­lable with silver mirror with lower VLT.

Clear/Silver mirror VLT 30–45

Neutral tint with silver mirror for increased glare protection.

Cornea // Lobes // Iris X // REtina

Pocito // Lobes

The color spectrum runs from blue to red with a lot of different shades in between. The color sensation and perception will differ between individuals and due to this the choice of lens color will to an extent be a subjective matter.

One basic rule explains the contrast enhancing effect by studying the color spectrum. When choosing a lens with yellow, orange,

pink or red color it blocks out more of the blue end of the color spectrum. This enhances contrast, enabling you to make out shapes, objects, and bumps in the snow more clearly. These lenses work well in low light, fog and flat light, but also in moderate light.

However some individuals experience good contrast by blocking the other end of the spectra as well, by using a blue tint.

In bright light, dark tints will keep your eyes more comfortable. There is also the possibility of choosing a brighter tint but with mirror coating to block some of the light to keep your eyes comfortable. Some individuals experience green as a good lens color since this tint will dampen the color spectrum evenly, the result is that the colors will be experienced as they normally do appear.

Technology In all our double lens constructions, the outer lens is made of Polycarbonate, which has the best anti scratch treatment available, with proven test results. All models with the Polycarbonate lens are 100% (99,9%) UV blocking and they also provide good penetration resistance.

Yellow/Silver mirror VLT 44

Blue/Blue mirror VLT 55

Enhancing contrast and visual definition for flat light to medium conditions.

Blue base with a colored mirror for better depth perception.

Lobes

Lobes

Smokey Yellow VLT 52

Yellow/Green mirror VLT 50-54

Clear/Gold mirror VLT 50-55

Persim/ Red mirror VLT 35-44

Neutral lens with a multi layer gold mirror coating for increased visual definition.

Boosting contrast with persimmon base, red mirror cuts out glare. From overcast to sunny conditions.

Cornea // Lobes // REtina

Cornea // Iris Bug // Iris X // REtina

Pink VLT 55

Contrast enhancing tint in between yellow and green which helps in flat and low light.

Allround lens which enhances contrast and visual definition for overcast to sunny condition.

Rose base lens tint increases depth perception, good in partly cloudy conditions.

Iris Comp

Iris Bug // Lobes // REtina

Iris Comp

Blue VLT 62

Rather neutral light reduction with a slightly contrasting color.

Iris Comp

When talking about anti fog properties, the main factors are the material used in the lens, the quality of the anti fog coating and single vs double lens construction. All our inner lenses are made of the highest quality Cellulose Propionate and come with an anti fog treatment which outperforms the requirements of the Ski goggle standards EN 174. Hence, all our goggles with double lens construction have an outstanding performance when it comes to anti fog properties. in our only single lens construction, Iris Comp, the lens is made in Cellulose Propionate with a anti fog coating to enable the

best anti fog properties possible in a single lens. The single lens is used to minimize the optical distortion and in this case the lens will not have the same high degree of protection against scratches as a Polycarbonate lens.

This means that our double lens goggles are the right choice unless you are competitive racer who wants to use the Iris Comp

Clear/Red mirror VLT 69-78

Clear VLT 82–90

Superb lens for overcast to medium sunny conditions with a contrast enhancing effect.

Iris Bug // Iris X

Iris Comp

NXT lenses >

Photochromatic VLT 10-50

The ultimate lens which reacts to changes in light conditions. From flat light to sunny conditions.

RETINA // IRIS // CORNEA

single lens to absolutely minimize all the effects of optical distortion.

48

Totally clear lens for evenings or low light conditions.

49

About

Lenses

About

Lenses

VLT – Visible Light Transmission

A measurement that specifies the percentage of light coming through the lens and reaching your eyes, a totally clear lens for

dark conditions typically have around 90% VLT and a very dark colored lens with mirror for sunny conditions may have down to 10% VLT. Most allround lenses will be found between 30 to 60 %. In the range of POC goggles you will find alternatives for all kinds of conditions.

Please note that the Visible Light Transmission for one tint can differ a bit if the lens has a single or double construction and if it has a spherical or cylindrical shape.

Colors vs. light conditions

Black VLT 12–14

Bronze/Blue mirror VLT 24

Black tint, ideal for very bright and sunny conditions.

Brown base tint with a blue reflective coating for sunny conditions.

Cornea // Lobes

Iris X

Orange VLT 28-55

Brightens details while boosting depth perception in flat light conditions. Also avai­­lable with silver mirror with lower VLT.

Clear/Silver mirror VLT 30–45

Neutral tint with silver mirror for increased glare protection.

Cornea // Lobes // Iris X // REtina

Pocito // Lobes

The color spectrum runs from blue to red with a lot of different shades in between. The color sensation and perception will differ between individuals and due to this the choice of lens color will to an extent be a subjective matter.

One basic rule explains the contrast enhancing effect by studying the color spectrum. When choosing a lens with yellow, orange,

pink or red color it blocks out more of the blue end of the color spectrum. This enhances contrast, enabling you to make out shapes, objects, and bumps in the snow more clearly. These lenses work well in low light, fog and flat light, but also in moderate light.

However some individuals experience good contrast by blocking the other end of the spectra as well, by using a blue tint.

In bright light, dark tints will keep your eyes more comfortable. There is also the possibility of choosing a brighter tint but with mirror coating to block some of the light to keep your eyes comfortable. Some individuals experience green as a good lens color since this tint will dampen the color spectrum evenly, the result is that the colors will be experienced as they normally do appear.

Technology In all our double lens constructions, the outer lens is made of Polycarbonate, which has the best anti scratch treatment available, with proven test results. All models with the Polycarbonate lens are 100% (99,9%) UV blocking and they also provide good penetration resistance.

Yellow/Silver mirror VLT 44

Blue/Blue mirror VLT 55

Enhancing contrast and visual definition for flat light to medium conditions.

Blue base with a colored mirror for better depth perception.

Lobes

Lobes

Smokey Yellow VLT 52

Yellow/Green mirror VLT 50-54

Clear/Gold mirror VLT 50-55

Persim/ Red mirror VLT 35-44

Neutral lens with a multi layer gold mirror coating for increased visual definition.

Boosting contrast with persimmon base, red mirror cuts out glare. From overcast to sunny conditions.

Cornea // Lobes // REtina

Cornea // Iris Bug // Iris X // REtina

Pink VLT 55

Contrast enhancing tint in between yellow and green which helps in flat and low light.

Allround lens which enhances contrast and visual definition for overcast to sunny condition.

Rose base lens tint increases depth perception, good in partly cloudy conditions.

Iris Comp

Iris Bug // Lobes // REtina

Iris Comp

Blue VLT 62

Rather neutral light reduction with a slightly contrasting color.

Iris Comp

When talking about anti fog properties, the main factors are the material used in the lens, the quality of the anti fog coating and single vs double lens construction. All our inner lenses are made of the highest quality Cellulose Propionate and come with an anti fog treatment which outperforms the requirements of the Ski goggle standards EN 174. Hence, all our goggles with double lens construction have an outstanding performance when it comes to anti fog properties. in our only single lens construction, Iris Comp, the lens is made in Cellulose Propionate with a anti fog coating to enable the

best anti fog properties possible in a single lens. The single lens is used to minimize the optical distortion and in this case the lens will not have the same high degree of protection against scratches as a Polycarbonate lens.

This means that our double lens goggles are the right choice unless you are competitive racer who wants to use the Iris Comp

Clear/Red mirror VLT 69-78

Clear VLT 82–90

Superb lens for overcast to medium sunny conditions with a contrast enhancing effect.

Iris Bug // Iris X

Iris Comp

NXT lenses >

Photochromatic VLT 10-50

The ultimate lens which reacts to changes in light conditions. From flat light to sunny conditions.

RETINA // IRIS // CORNEA

single lens to absolutely minimize all the effects of optical distortion.

48

Totally clear lens for evenings or low light conditions.

49

Eyes

Do

High performance action specs.

Eyes

•

Handmade Acetate frame

• NXT lenses

•

NXT Lenses

• Overmolded Hytrel rubber for comfort, fit and grip

•

• Wrapped design and geometry for great peripheral vision and protection

•

• Light weight

50

Versatile performance frames

Technical features

Technical features • Lightweight and durable TR-90 Grilamid frames

• Various NXT lens options for every need

Am

Depending on your lens of choice, the lenses have different features:

Wrapped design and geometry for great peripheral vision and protection Various NXT lens options for every need

•

Polarized

•

Photochromatic

•

HCD High Chromatic Definition

•

Tint and visible light transmission for each situation

All NXT lenses have the following features: •

Superior optical properties compared to other polymer lens materials

•

Light weight

•

All POC NXT lenses have the following coatings: •

4 layers or anti reflective coating - reduces reflections and give more clear vision

Ballistic resistance – unbreakable

•

Hydrophobic coating – water repellent

•

Stress Cracking resistant

•

Anti Scratch coating – scratch resistant

•

Chemical resistant

•

Oleophobic coating – grease resistant – makes lenses stay clean

•

UV Protection

51

Eyes

Do

High performance action specs.

Eyes

•

Handmade Acetate frame

• NXT lenses

•

NXT Lenses

• Overmolded Hytrel rubber for comfort, fit and grip

•

• Wrapped design and geometry for great peripheral vision and protection

•

• Light weight

50

Versatile performance frames

Technical features

Technical features • Lightweight and durable TR-90 Grilamid frames

• Various NXT lens options for every need

Am

Depending on your lens of choice, the lenses have different features:

Wrapped design and geometry for great peripheral vision and protection Various NXT lens options for every need

•

Polarized

•

Photochromatic

•

HCD High Chromatic Definition

•

Tint and visible light transmission for each situation

All NXT lenses have the following features: •

Superior optical properties compared to other polymer lens materials

•

Light weight

•

All POC NXT lenses have the following coatings: •

4 layers or anti reflective coating - reduces reflections and give more clear vision

Ballistic resistance – unbreakable

•

Hydrophobic coating – water repellent

•

Stress Cracking resistant

•

Anti Scratch coating – scratch resistant

•

Chemical resistant

•

Oleophobic coating – grease resistant – makes lenses stay clean

•

UV Protection

51

Eyes

Was

The everyday functional specs.

Eyes

Technical features •

CNC cut and hand processed Acetate frames

•

NXT Lenses

•

7 bar hinges

•

Various NXT lens options for every need

52

Did

Technical features •

Light weight Acetate frames

•

NXT Lenses

•

Various NXT lens options for every need

53

The everyday functional specs.

Eyes

Was

The everyday functional specs.

Eyes

Technical features •

CNC cut and hand processed Acetate frames

•

NXT Lenses

•

7 bar hinges

•

Various NXT lens options for every need

52

Did

Technical features •

Light weight Acetate frames

•

NXT Lenses

•

Various NXT lens options for every need

53

The everyday functional specs.

Hands

About

Gloves

N

othing can match a pair of genuine leather gloves for grip or feel. Our gloves use the best available materials to provide you with the best possible comfort, warmth and ventilation of excess moisture.

POC gloves are made of an amazing gripping surface of goat skin or heatmolded silicone rubber. Whether you are looking for a light and flexible version for big mountain skiing or a race glove with protective panels, you will find it here.

54

55

Hands

About

Gloves

N

othing can match a pair of genuine leather gloves for grip or feel. Our gloves use the best available materials to provide you with the best possible comfort, warmth and ventilation of excess moisture.

POC gloves are made of an amazing gripping surface of goat skin or heatmolded silicone rubber. Whether you are looking for a light and flexible version for big mountain skiing or a race glove with protective panels, you will find it here.

54

55

Gloves

Additional Color

Wrist Freeride

Wrist Freeride is developed together with our Freeride World Tour Champion Aurélien Ducroz.

Softshell backhand material with membrane backing, a supple 2 mm EVA knuckle padding and elastic knitted cuff. Pittards specially treated goat leather for best durability and grip in palm area.

Micro Bemberg lining for maximum comfort and Thinsulate insulation to keep you warm.Sizes: XS–XL

Gloves

Palm Comp 2.0

Additional Color

Technical features 01 Forearm protector integration with neoprene cuff guard.

02 VPD sandwich construction protection.

03 Pittard´s goat leather of the highest quality.

04 Kevlar fabric reinforcement for increased durability.

01

02

03 04

Forearm Classic

56

57

A comfortable and flexible race glove with a high degree of protection. In cooperation with our WC riders we have developed a brand new racing glove where the protective neoprene cuff guard can be integrated with our new Forearm protector. To reduce thumb injuries when hitting the gates we have also developed a protective sandwich construction incorporating our shock absorbing VPD material. Pittard´s goat leather of the highest quality and external seams for increased comfort and optimal grip. Kevlar fabric reinforcement to increase durability and Thinsulate for best insulation. Sizes: XS–XL

Gloves

Additional Color

Wrist Freeride

Wrist Freeride is developed together with our Freeride World Tour Champion Aurélien Ducroz.

Softshell backhand material with membrane backing, a supple 2 mm EVA knuckle padding and elastic knitted cuff. Pittards specially treated goat leather for best durability and grip in palm area.

Micro Bemberg lining for maximum comfort and Thinsulate insulation to keep you warm.Sizes: XS–XL

Gloves

Palm Comp 2.0

Additional Color

Technical features 01 Forearm protector integration with neoprene cuff guard.

02 VPD sandwich construction protection.

03 Pittard´s goat leather of the highest quality.

04 Kevlar fabric reinforcement for increased durability.

01

02

03 04

Forearm Classic

56

57

A comfortable and flexible race glove with a high degree of protection. In cooperation with our WC riders we have developed a brand new racing glove where the protective neoprene cuff guard can be integrated with our new Forearm protector. To reduce thumb injuries when hitting the gates we have also developed a protective sandwich construction incorporating our shock absorbing VPD material. Pittard´s goat leather of the highest quality and external seams for increased comfort and optimal grip. Kevlar fabric reinforcement to increase durability and Thinsulate for best insulation. Sizes: XS–XL

Gloves

WO

A warm and cozy mitten specifically designed for the hands of Women and packed with insulation.

Smooth and supple sheep leather for the right feel and flexibility.

A finger glove with great freedom of movement and specific Womens fit. Equipped with Thinsulate for effective insulation. Smooth and supple sheep leather for the right feel and flexibility.

Women´s sizes: S, M & L

Gloves

Misc

Nail BUG

WO Mitten

The grip, durability and feel of a high-end leather glove combined with the flexibility and lightness of technical textile provides for a supple glove. ­ The leather is specially selected goat skin, famous for its remarkable durability.

The thin neoprene cuff assures great freedom of movement and is perforated to enable ventilation.

Sizes: XS–XL

Palm Mittens

Nail All Black WO Glove

Want the best for the coldest days? The Palm Mittens use the same protective concept as the Palm Comp glove but add the benefits of a mitten. Comfortable interior with separate pockets for the fingers, top notch insulation and leather materials all come together to make a glove that will never allow cold weather to stop you from skiing.

Sizes: XS–XL

Nail All Black is all about leather. The best leather has been used. Pittard Goat on the inside for great feel, grip and touch. On the outside, we have chosen a specially treated goat leather for the perfect overall feel and look.

Sizes: XS–XL

Palm X

Print

A glove with a shorter cuff and softer padding that gives you greater comfort and freedom of move­ment. The ultimate glove for freeskiers or anyone who spends long hours on the slopes and requires a durable, warm and spacious glove where hands won’t feel confined or pressurized but that still provide good protection.

Sizes: XS–XL

58

A very supply highperformance glove.

It has a tight fit, short neopren cuff and protection over the knuckles. It is a superb glove for DH racing, for Ski X, the park or spring skiing.

Sizes: XS-XL

59

Gloves

WO

A warm and cozy mitten specifically designed for the hands of Women and packed with insulation.

Smooth and supple sheep leather for the right feel and flexibility.

A finger glove with great freedom of movement and specific Womens fit. Equipped with Thinsulate for effective insulation. Smooth and supple sheep leather for the right feel and flexibility.

Women´s sizes: S, M & L

Gloves

Misc

Nail BUG

WO Mitten

The grip, durability and feel of a high-end leather glove combined with the flexibility and lightness of technical textile provides for a supple glove. ­ The leather is specially selected goat skin, famous for its remarkable durability.

The thin neoprene cuff assures great freedom of movement and is perforated to enable ventilation.

Sizes: XS–XL

Palm Mittens

Nail All Black WO Glove

Want the best for the coldest days? The Palm Mittens use the same protective concept as the Palm Comp glove but add the benefits of a mitten. Comfortable interior with separate pockets for the fingers, top notch insulation and leather materials all come together to make a glove that will never allow cold weather to stop you from skiing.

Sizes: XS–XL

Nail All Black is all about leather. The best leather has been used. Pittard Goat on the inside for great feel, grip and touch. On the outside, we have chosen a specially treated goat leather for the perfect overall feel and look.

Sizes: XS–XL

Palm X

Print

A glove with a shorter cuff and softer padding that gives you greater comfort and freedom of move­ment. The ultimate glove for freeskiers or anyone who spends long hours on the slopes and requires a durable, warm and spacious glove where hands won’t feel confined or pressurized but that still provide good protection.

Sizes: XS–XL

58

A very supply highperformance glove.

It has a tight fit, short neopren cuff and protection over the knuckles. It is a superb glove for DH racing, for Ski X, the park or spring skiing.

Sizes: XS-XL

59

POC WO

POC WO. We always refused to address women with the usual “rosy-girly-stuff”, we think it’s ridiculous.

Having said that, over the 6 years we have been around, we have come to learn a bit about anatomy and the differences between genders. There are differences and we admit that we have been discriminating, as a number of products only had male users in mind.

Over the 6 years we have been around, we have come to learn a bit about anatomy and the differences between genders. There are differences and we admit that we have been discriminating, as a number of products only had male users in mind.

POC WO is extracted on the basis that, because of hips and narrower waists, back protectors tend to climb up under the arm pits while the goggles and helmets are often too big for smaller female faces. This in addition to the fact that most women would tell you that their hands are freezing, their hands are narrower and their fingers longer.

POC WO

Collection

Helmets

Goggles

Gloves

And that’s why we thought it would make sense to develop products that would fight these issues and simply offer more adequate products for women.

Body Armor

60

61

POC WO

POC WO. We always refused to address women with the usual “rosy-girly-stuff”, we think it’s ridiculous.

Having said that, over the 6 years we have been around, we have come to learn a bit about anatomy and the differences between genders. There are differences and we admit that we have been discriminating, as a number of products only had male users in mind.

Over the 6 years we have been around, we have come to learn a bit about anatomy and the differences between genders. There are differences and we admit that we have been discriminating, as a number of products only had male users in mind.

POC WO is extracted on the basis that, because of hips and narrower waists, back protectors tend to climb up under the arm pits while the goggles and helmets are often too big for smaller female faces. This in addition to the fact that most women would tell you that their hands are freezing, their hands are narrower and their fingers longer.

POC WO

Collection

Helmets

Goggles

Gloves

And that’s why we thought it would make sense to develop products that would fight these issues and simply offer more adequate products for women.

Body Armor

60

61

POCito

POCito

Collection

Finally, kid´s protection gear that is designed and developed just for them!

pocito is a series of products for kids between 4 and 10 years old, all developed to prevent

accidents or to decrease the severity of injuries in an accident.

Helmets

children these days face a vulnerable situation, often skiing on crowded slopes among over-excited adults running fiercely downhill, many of whom are more or less out-of-control but sadly unaware of it. Statistics show that one of the fastest-rising types of accidents on the slopes comes from kids being run into by adult skiers. If a child weighing perhaps 20% that of an adult is hit at high speed, they need an outstandingly good helmet, together with a back protector, to protect the most vital parts of their bodies.

POC is proud to present POCito, a range of products for kids that complies with our mission of reducing the consequences of skiing accidents and possibly saving lives.

Body Armor

in other words, child skiers need effective, customized protection, and they also need to

be seen. Our ambition is clear, to make no compromises on kids’ protection, but to design products that are at least as good as the adult gear, while trying to understand the specific needs of children’s safety.

Goggles

But is there any chance of preventing these accidents?

Yes, in many cases we believe there is. Beyond issuing information to skiers in general, we have developed products to alert surrounding skiers to slow down or pay attention and have chosen the most effective colors and properties for these. avalanches are another risk. These days ski patrollers are forced to dig out even the smallest avalanches across ski runs because of the risk of a child being hidden beneath the snow. All of our kids’ helmets are therefore equipped with an avalanche reflector from Recco®. All products also have visual reflectors to make children clearly visible in areas around skiing, for example in car parks or near traffic.

Accessories

while we were developing these products, people told us that it is impossible to market kids’ gear that provides the quality and protection that we are seeking. At POC, we believe it’s exactly the opposite. Most parents would never compromise their children’s well-being or safety and buy something because it’s cheap, if it is not good enough. And most of the kids’ protection on the market today is less safe and performs less well than what is possible with modern technology.

POC is therefore proud to present POCito©, a new range of products for kids that complies with our mission of reducing the consequences of skiing accidents and possibly saving lives.

62

63

POCito

POCito

Collection

Finally, kid´s protection gear that is designed and developed just for them!

pocito is a series of products for kids between 4 and 10 years old, all developed to prevent

accidents or to decrease the severity of injuries in an accident.

Helmets

children these days face a vulnerable situation, often skiing on crowded slopes among over-excited adults running fiercely downhill, many of whom are more or less out-of-control but sadly unaware of it. Statistics show that one of the fastest-rising types of accidents on the slopes comes from kids being run into by adult skiers. If a child weighing perhaps 20% that of an adult is hit at high speed, they need an outstandingly good helmet, together with a back protector, to protect the most vital parts of their bodies.

POC is proud to present POCito, a range of products for kids that complies with our mission of reducing the consequences of skiing accidents and possibly saving lives.

Body Armor

in other words, child skiers need effective, customized protection, and they also need to

be seen. Our ambition is clear, to make no compromises on kids’ protection, but to design products that are at least as good as the adult gear, while trying to understand the specific needs of children’s safety.

Goggles

But is there any chance of preventing these accidents?

Yes, in many cases we believe there is. Beyond issuing information to skiers in general, we have developed products to alert surrounding skiers to slow down or pay attention and have chosen the most effective colors and properties for these. avalanches are another risk. These days ski patrollers are forced to dig out even the smallest avalanches across ski runs because of the risk of a child being hidden beneath the snow. All of our kids’ helmets are therefore equipped with an avalanche reflector from Recco®. All products also have visual reflectors to make children clearly visible in areas around skiing, for example in car parks or near traffic.

Accessories

while we were developing these products, people told us that it is impossible to market kids’ gear that provides the quality and protection that we are seeking. At POC, we believe it’s exactly the opposite. Most parents would never compromise their children’s well-being or safety and buy something because it’s cheap, if it is not good enough. And most of the kids’ protection on the market today is less safe and performs less well than what is possible with modern technology.

POC is therefore proud to present POCito©, a new range of products for kids that complies with our mission of reducing the consequences of skiing accidents and possibly saving lives.

62

63

Pro Models

Pro Models

Collection

Receptor Tanner Ed.

Receptor TJ Ed.

Receptor Backe Ed.

Frontal Jon Olsson Ed.

Synapsis Ducroz Ed.

Wrist FR Ducroz Ed.

Wrist FR Ducroz Ed.

Sinuse Axel B채ck.

Skull Comp Bode Ed.

Skull Comp Julia Ed.

Iris Comp Julia Ed.

Sinuse SL The Swedes Ed.

Skull Comp The Swedes Ed.

Iris Comp The Swedes Ed.

pro Models

65

Pro Models

Pro Models

Collection

Receptor Tanner Ed.

Receptor TJ Ed.

Receptor Backe Ed.

Frontal Jon Olsson Ed.

Synapsis Ducroz Ed.

Wrist FR Ducroz Ed.

Wrist FR Ducroz Ed.

Sinuse Axel B채ck.

Skull Comp Bode Ed.

Skull Comp Julia Ed.

Iris Comp Julia Ed.

Sinuse SL The Swedes Ed.

Skull Comp The Swedes Ed.

Iris Comp The Swedes Ed.

pro Models

65

Race Stuff

A

s we entered the market back in 2005, the first segment to address was the racing community.

A challenging group with the highest possible demands on protection and performance.

The initial proposal was the Skull Comp helmet, providing a new concept for racing helmets, with its thin outer shell and aramid penetration barrier for increased protection.

Since then, the pace has been high, improving existing products together with new and additional products evolving from the needs of some of the best athletes on the planet. We are now pleased to offer a full range that covers every need for any racer, no matter what configuration they prefer.

Race Stuff

Collection

Helmets

Goggles

Body Armor

Race Wear

Gloves

66

Fore more information and additional colors, please see original product page.

67

Race Stuff

A

s we entered the market back in 2005, the first segment to address was the racing community.

A challenging group with the highest possible demands on protection and performance.

The initial proposal was the Skull Comp helmet, providing a new concept for racing helmets, with its thin outer shell and aramid penetration barrier for increased protection.

Since then, the pace has been high, improving existing products together with new and additional products evolving from the needs of some of the best athletes on the planet. We are now pleased to offer a full range that covers every need for any racer, no matter what configuration they prefer.

Race Stuff

Collection

Helmets

Goggles

Body Armor

Race Wear

Gloves

66

Fore more information and additional colors, please see original product page.

67

Race Wear

Check out our Wheels gear at www.pocsports.com

Misc

Skin GS VPD

Skin

Thanks to POC development of VPD (Visco-Elastic-PolymerDough), it was evident to take racing suits one step further.

Instead of only integrating arm and leg protection, an agile back protector would make sense. And it does. This all in one-suit is available in junior and senior sizes.

A racing suit made of supersupple artificial fiber.

Produced in a GS version with protection and a DH version without protection. Available in junior and senior sizes. The senior suit is approved by FIS.

Technical features 01 Extra layer of high density Visco-Elastic Polymer Dough (VPD)in spinal area for maximum protection 02 Low density VPD for flexibility 03 Ventilation holes

01 02

03

68

Race Pant Just as the race jacket, these pants are made of a flexible and stretchy nylon fabric which is flossy on the inside to keep you warm and has a durable outer layer to stand the tear from hitting gates. Made with the ambition to be a long lasting friend on the mountain.

Rider: Danny MacAskill Š Pelle Jansson

Race Jacket This jacket is created to keep you protected and warm when wearing it on top of your racing suit. Made of a flexible and stretchy nylon fabric which is flossy on the inside to keep you warm and has a durable outer layer to stand the tear from hitting gates.

69

Race Wear

Check out our Wheels gear at www.pocsports.com

Misc

Skin GS VPD

Skin

Thanks to POC development of VPD (Visco-Elastic-PolymerDough), it was evident to take racing suits one step further.

Instead of only integrating arm and leg protection, an agile back protector would make sense. And it does. This all in one-suit is available in junior and senior sizes.

A racing suit made of supersupple artificial fiber.

Produced in a GS version with protection and a DH version without protection. Available in junior and senior sizes. The senior suit is approved by FIS.

Technical features 01 Extra layer of high density Visco-Elastic Polymer Dough (VPD)in spinal area for maximum protection 02 Low density VPD for flexibility 03 Ventilation holes

01 02

03

68

Race Pant Just as the race jacket, these pants are made of a flexible and stretchy nylon fabric which is flossy on the inside to keep you warm and has a durable outer layer to stand the tear from hitting gates. Made with the ambition to be a long lasting friend on the mountain.

Rider: Danny MacAskill Š Pelle Jansson

Race Jacket This jacket is created to keep you protected and warm when wearing it on top of your racing suit. Made of a flexible and stretchy nylon fabric which is flossy on the inside to keep you warm and has a durable outer layer to stand the tear from hitting gates.

69

TEAM GEAR

About

Team Gear

P

OC is putting increased emphasize on off activity clothing. Even though it’s just a tee or a hood, all garments are made of the best available fabrics and produced with care and love, using the latest technologies in sewing and stitching.

These are all durable, long lasting products with the ambition of becoming your favorite piece of clothing.

70

71

TEAM GEAR

About

Team Gear

P

OC is putting increased emphasize on off activity clothing. Even though it’s just a tee or a hood, all garments are made of the best available fabrics and produced with care and love, using the latest technologies in sewing and stitching.

These are all durable, long lasting products with the ambition of becoming your favorite piece of clothing.

70

71

Team Gear

T-shirts

All T-shirts are made of 100% high quality cotton, with printing that will last and with the right look and feel. Perfect before and after ski.

Tanner Hall

Julia Mancuso Women´s sizes: XS–L

Men´s sizes: XS–XXL

Corp T-shirt Men´s sizes: XS- XXL Women´s sizes: XS- L

Jon Olsson

Anders Backe

Men´s sizes: XS–XXL Also in women´s editon

Men´s sizes: XS–XXL

Also in women´s editon

Spine T-shirt Men´s sizes: XS- XXL

Aurélien Ducroz Front

Back

Bode Miller LS

Men´s sizes: XS–XXL

Men´s sizes: XS–XXL

Color T-shirt All colors available in women´s edition.

Men´s sizes: XS-XXL Women´s sizes: XS-L

Surf Shorts POCito Kid´s sizes: 120–150 cl

The Swedes Men´s sizes: XS–XXL

72

POCito Hood

Perfect on the beach, made in quick drying durable fabric. Sizes 28”–38”

Kid´s sizes: 120–150 cl

Race Stuff Men´s sizes: XS–XXL

73

Team Gear

T-shirts

All T-shirts are made of 100% high quality cotton, with printing that will last and with the right look and feel. Perfect before and after ski.

Tanner Hall

Julia Mancuso Women´s sizes: XS–L

Men´s sizes: XS–XXL

Corp T-shirt Men´s sizes: XS- XXL Women´s sizes: XS- L

Jon Olsson

Anders Backe

Men´s sizes: XS–XXL Also in women´s editon

Men´s sizes: XS–XXL

Also in women´s editon

Spine T-shirt Men´s sizes: XS- XXL

Aurélien Ducroz Front

Back

Bode Miller LS

Men´s sizes: XS–XXL

Men´s sizes: XS–XXL

Color T-shirt All colors available in women´s edition.

Men´s sizes: XS-XXL Women´s sizes: XS-L

Surf Shorts POCito Kid´s sizes: 120–150 cl

The Swedes Men´s sizes: XS–XXL

72

POCito Hood

Perfect on the beach, made in quick drying durable fabric. Sizes 28”–38”

Kid´s sizes: 120–150 cl

Race Stuff Men´s sizes: XS–XXL

73

Team Gear

Misc

Corp Beanie 50% Merinowool, 50% Acrylic with 100% Cotton lining.

One size.

Color Hood 100% cotton hood with POC logo print.

Men´s sizes: XS–XXL

Bright Color Beanie Loose knitted beanie.

50% Merinowool, 50% Acrylic and with a Polyester fleece lining. Slouchy fit.

One size.

Color Beanie

Corp Zip Extra thick cotton and printed POC logo. Zipper in front.

Men´s sizes: XS–XXL Women´s sizes: XS–L

POC Headband 50% Merinowool, 50% Acrylic and with a polyester fleece lining.

One size.

Air Jersey Extra thick cotton and printed POC logo. Zipper in front.

Ski straps

Men´s sizes: XS–XXL Women´s sizes: XS–L

Protect your skis too!

Corp Cap

74

Race Stuff Cap

Cotton twill cap in clean design and “flexfit” function.

Cotton twill cap in clean design and “flexfit” function.

Sizes: S/M and L/XL

Sizes: S/M and L/XL

75

Team Gear

Misc

Corp Beanie 50% Merinowool, 50% Acrylic with 100% Cotton lining.

One size.

Color Hood 100% cotton hood with POC logo print.

Men´s sizes: XS–XXL

Bright Color Beanie Loose knitted beanie.

50% Merinowool, 50% Acrylic and with a Polyester fleece lining. Slouchy fit.

One size.

Color Beanie

Corp Zip Extra thick cotton and printed POC logo. Zipper in front.

Men´s sizes: XS–XXL Women´s sizes: XS–L

POC Headband 50% Merinowool, 50% Acrylic and with a polyester fleece lining.

One size.

Air Jersey Extra thick cotton and printed POC logo. Zipper in front.

Ski straps

Men´s sizes: XS–XXL Women´s sizes: XS–L

Protect your skis too!

Corp Cap

74

Race Stuff Cap

Cotton twill cap in clean design and “flexfit” function.

Cotton twill cap in clean design and “flexfit” function.

Sizes: S/M and L/XL

Sizes: S/M and L/XL

75

POC supports Wings For Life

w

e do everything we can to possibly save lives and to reduce consequences of accidents for gravity sports athletes by developing and renewing what personal protection is all about.

Preventing or reducing the severity of injuries is one thing, we would like to what we can to also help those who are already injured. This is why we support Wings for Life.

When purchasing our new Wings for Life Edition Spine VPD Vest, POC donates 5% of the related income to Wings For Life Spinal Cord Research Foundation.

Size Guide

Helmets

Skull Comp Skull X Skull Light

Head circumference XS 51-52 cm S 53-54 cm M 55-56 cm L 57-58 cm XL 59-60 cm XXL 61-62 cm

Synapsis

Head circumference S 53-54 cm M 55-56 cm L 57-58 cm XL 59-60 cm

Frontal

The Wings for Life Spinal Cord Research Foundation is a privately funded non-profit organization which follows the principal aim of promoting research worldwide in order to expedite scientific and clinical progress towards a putative cure for Spinal Cord Injury Paralysis. The goal is clearly defined: SPINAL CORD INJURY MUST BECOME CURABLE For more information about Wings for Life please have a look at: www.wingsforlife.com

Head circumference S 53-54 cm M 55-56 cm L 57-58 cm XL 59-60 cm

Receptor Bug

Gloves

Joint VPD Elbow

Head circumference XS 51-52 cm S 53-54 cm M 55-56 cm L 57-58 cm XL 59-60 cm XXL 61-62 cm

Knuckle circumference XS 7” S 7½ - 8 ” M 8½ - 9 ” L 9½ - 10 ” XL 10½ - 11 ”

Circumference under arm S 20-25 cm 7,9-9,8 ” M 25-30 cm 9,8-11,8 ” L 30-35 cm 11,8-13,8 ” Circumference biceps S 22-27 cm 8,7-10,6 ” M 27-32 cm 10,6-12,6 ” L 32-37 cm 12,6-14,6 ”

Hip shorts Sinuse

Head circumference XS 51-52 cm S 53-54 cm M 55-56 cm L 57-58 cm XL 59-60 cm XXL 61-62 cm

Cortex DH

Head circumference M-L 55-57 cm L-XL 58-60 cm

Waist circumference XS-S 28-30 ” M 31-33 ” L-XL 34-36 ”

Full arm jacket

Back protectors Body length XS-S 150-165 cm M 165-180 cm L-XL 180- cm

59-65 ” 65-71 ” 71- ”

POCito Backprotection POCito helmet

XS-S 51-54 cm

Body length S 100-125 cm L 125-150 cm

39-49 ” 49-59 ”

POCito Light Receptor+

Head circumference S 53-54 cm M 55-56 cm L 57-58 cm XL 59-60 cm

XS-S 51-54 cm M-L 55-58 cm

Joint VPD Knee Circumference calf S 30-34 cm 11,8-13,4 ” M 34-38 cm 13,4-15,0 ” L 38-42 cm 15,0-16,5 ” Circumference 10 cm above centre knee cap S 37-41 cm 14,6-16,1 ” M 41-45 cm 16,1-17,7 ” L 45-49 cm 17,7-19,3 ”

Body length S 150-165 cm M 165-180 cm L 180- cm

Full arm jacket Jr Body length S 100-120 cm M 120-140 cm L 140-160 cm

POC supports Wings For Life

w

e do everything we can to possibly save lives and to reduce consequences of accidents for gravity sports athletes by developing and renewing what personal protection is all about.

Preventing or reducing the severity of injuries is one thing, we would like to what we can to also help those who are already injured. This is why we support Wings for Life.

When purchasing our new Wings for Life Edition Spine VPD Vest, POC donates 5% of the related income to Wings For Life Spinal Cord Research Foundation.

Size Guide

Helmets

Skull Comp Skull X Skull Light

Head circumference XS 51-52 cm S 53-54 cm M 55-56 cm L 57-58 cm XL 59-60 cm XXL 61-62 cm

Synapsis

Head circumference S 53-54 cm M 55-56 cm L 57-58 cm XL 59-60 cm

Frontal

The Wings for Life Spinal Cord Research Foundation is a privately funded non-profit organization which follows the principal aim of promoting research worldwide in order to expedite scientific and clinical progress towards a putative cure for Spinal Cord Injury Paralysis. The goal is clearly defined: SPINAL CORD INJURY MUST BECOME CURABLE For more information about Wings for Life please have a look at: www.wingsforlife.com

Head circumference S 53-54 cm M 55-56 cm L 57-58 cm XL 59-60 cm

Receptor Bug

Gloves

Joint VPD Elbow

Head circumference XS 51-52 cm S 53-54 cm M 55-56 cm L 57-58 cm XL 59-60 cm XXL 61-62 cm

Knuckle circumference XS 7” S 7½ - 8 ” M 8½ - 9 ” L 9½ - 10 ” XL 10½ - 11 ”

Circumference under arm S 20-25 cm 7,9-9,8 ” M 25-30 cm 9,8-11,8 ” L 30-35 cm 11,8-13,8 ” Circumference biceps S 22-27 cm 8,7-10,6 ” M 27-32 cm 10,6-12,6 ” L 32-37 cm 12,6-14,6 ”

Hip shorts Sinuse

Head circumference XS 51-52 cm S 53-54 cm M 55-56 cm L 57-58 cm XL 59-60 cm XXL 61-62 cm

Cortex DH

Head circumference M-L 55-57 cm L-XL 58-60 cm

Waist circumference XS-S 28-30 ” M 31-33 ” L-XL 34-36 ”

Full arm jacket

Back protectors Body length XS-S 150-165 cm M 165-180 cm L-XL 180- cm

59-65 ” 65-71 ” 71- ”

POCito Backprotection POCito helmet

XS-S 51-54 cm

Body length S 100-125 cm L 125-150 cm

39-49 ” 49-59 ”

POCito Light Receptor+

Head circumference S 53-54 cm M 55-56 cm L 57-58 cm XL 59-60 cm

XS-S 51-54 cm M-L 55-58 cm

Joint VPD Knee Circumference calf S 30-34 cm 11,8-13,4 ” M 34-38 cm 13,4-15,0 ” L 38-42 cm 15,0-16,5 ” Circumference 10 cm above centre knee cap S 37-41 cm 14,6-16,1 ” M 41-45 cm 16,1-17,7 ” L 45-49 cm 17,7-19,3 ”

Body length S 150-165 cm M 165-180 cm L 180- cm

Full arm jacket Jr Body length S 100-120 cm M 120-140 cm L 140-160 cm

Rider: Jacopo Bufacchi ŠMarco Spataro

Reproduction forbidden.

All rights reserved.

Some of the products shown may differ from products supplied.

POC reserves the right to replace or modify any product or article number shown.

All products designed and engineered

by POC Sweden AB. Design: POC Sweden AB

08

10

IONER 2 AT

00

PL

8

A STOV

06

78

79