John Deere 6620 COMBINE WITH 653 ROW-CROP HEAD Parts Catalog Manual

1A2 6620 COMBINE

HP1469

-UN-01JAN94

JOHN DEERE 6620 COMBINE WITH 653 ROW-CROP HEAD

(SPECIFICATIONS AND DESIGN SUBJECT TO CHANGE WITHOUT NOTICE)

6620 COMBINE PC1666

(23-OCT-90)

10-1

PN=1

1A3 6620 COMBINE

NOTE IN ADDITION TO TITAN COMBINES, PARTS INFORMATION FOR TITAN II COMBINES IS ALSO LOCATED IN THIS CATALOG. SERIAL NUMBER (610301) INDICATES TITAN II PARTS. FOR 200 SERIES PLATFORM PARTS INFORMATION, REFER TO JOHN DEERE 200 SERIES PLATFORM PARTS CATALOG - PC-1558.

FOR 900 SERIES PLATFORM PARTS INFORMATION, REFER TO JOHN DEERE 900 SERIES PLATFORM PARTS CATALOG - PC-2104 FOR 40 SERIES CORN HEAD PARTS INFORMATION, REFER TO JOHN DEERE 40 SERIES CORN HEAD PARTS CATALOG - PC-1223.

FOR 50 SERIES ROW-CROP HEAD PARTS INFORMATION, REFER TO JOHN DEERE 50 SERIES ROW-CROP HEAD PARTS CATALOG - PC-1549.

FOR 50A SERIES ROW-CROP HEAD PARTS INFORMATION, REFER TO JOHN DEERE 50A SERIES ROW-CROP HEAD PARTS CATALOG - PC-1747.

FOR THREE-ROLLER BELT PICKUP PARTS INFORMATION, REFER TO JOHN DEERE THREE-ROLLER BELT PICKUP PARTS CATALOG - PC-1189 (200 SERIES) OR PC-2210 (900 SERIES)

IMPORTANT THIS PARTS CATALOG CONTAINS PARTS INFORMATION FOR THE 6620 COMBINE. MACHINE VINTAGE IS DETERMINED BY THE COMBINE SERIAL NUMBER OR THE PRODUCT IDENTIFICATION NUMBER (PIN).

IT IS IMPORTANT THAT THE CORRECT NUMBERS BE USED WHEN ORDERING PARTS.

10-2

6620 COMBINE PC1666

(23-OCT-90) PN=2

1A4 6620 COMBINE

SERIAL NUMBER AND PRODUCT IDENTIFICATION NUMBER (PIN) PLATES USE ALL NUMBERS, LETTERS AND SPACES SHOWN ON THE SERIAL NUMBER PLATE OR THE PRODUCT IDENTIFICATION NUMBER PLATE IN WARRANTY CORRESPONDENCE. COMBINES (

-551900)

ON THESE COMBINES, THE SERIAL NUMBER PLATE IS LOCATED ON THE REAR LEFT-HAND UPRIGHT. AN EXAMPLE OF THE SERIAL NUMBER ON THIS PLATE IS: E6620551900H E - EQUIPMENT 6620 - COMBINE MODEL 551900 - COMBINE SEPARATOR SERIAL NUMBER H - MANUFACTURING UNIT (HARVESTER WORKS) COMBINES (551901-

)

ON THESE COMBINES, THE PRODUCT IDENTIFICATION PLATE (PIN) IS LOCATED NEAR THE RIGHT-HAND SIDE OF THE TOOL BOX. AN EXAMPLE OF THE TWO-LINES ON THIS PIN PLATE IS: H06620X551901 COMBINE (FIRST LINE) H0 - MANUFACTURING UNIT (HARVESTER WORKS) 6620 - MODEL IDENTIFIER X - CONFIGURATION CODE/MODEL IDENTIFIER SUFFIX 551901 - SEQUENTIAL NUMBER USED IN SERIAL NO. COLUMN (SECOND LINE) COMBINE - TYPE OF PRODUCT

6620 COMBINE PC1666

(23-OCT-90)

10-3

PN=3

1A5 6620 COMBINE

ENGINE SERIAL NUMBER THE ENGINE SERIAL NUMBER PLATE IS LOCATED ON THE RIGHT-HAND SIDE OF THE ENGINE BLOCK. ENGINES (

-227599)

AN EXAMPLE OF THE ONE-LINE, SIXTEEN-DIGIT NUMBER ON THIS SERIAL NUMBER PLATE IS: 6466TH01227599RG 6 - NUMBER OF CYLINDERS 466 - CUBIC INCH DISPLACEMENT T - FUEL TYPE (TURBOCHARGED DIESEL) H - MANUFACTURING UNIT OF MACHINE (HARVESTER WORKS) 01 - ENGINE VERSION 227599 - ENGINE SERIAL NUMBER RG - MANUFACTURING UNIT OF ENGINE (JOHN DEERE ENGINE WORKS) ENGINES (227600-

)

AN EXAMPLE OF THE TWO-LINE NUMBER ON THIS SERIAL NUMBER PLATE IS: RG6466A227600 6466TH05 (FIRST LINE) RG - MANUFACTURING UNIT (JOHN DEERE ENGINE WORKS) 6 - NUMBER OF CYLINDERS 466 - CUBIC INCH DISPLACEMENT A - CONFIGURATION CODE/MODEL IDENTIFIER SUFFIX 227600 - SEQUENTIAL NUMBER USED IN SERIAL NO. COLUMN

(SECOND LINE) 6 - NUMBER OF CYLINDERS 466 - CUBIC INCH DISPLACEMENT T - FUEL TYPE (TURBOCHARGED DIESEL) H - MANUFACTURING UNIT OF MACHINE (HARVESTER WORKS) 05 - ENGINE VERSION

PARTS LISTING INFORMATION SERIAL NUMBER OR PRODUCT IDENTIFICATION NUMBER (PIN) INFORMATION SHOWS ON WHICH MACHINES A PART MAY BE USED. FOR EXAMPLE: -

THE PART CAN BE USED ON ALL MACHINES.

-000000 000000000000-000000

THE PART CAN BE USED ON ALL MACHINES UP TO AND INCLUDING THE SERIAL NUMBER LISTED. THE PART CAN BE USED ON ALL MACHINES BEGINNING WITH THE SERIAL NUMBER LISTED. THE PART CAN BE USED ON ALL MACHINES BETWEEN AND INCLUDING THE SERIAL NUMBERS LISTED.

WHEN XXXXXX’S ARE LISTED IN PLACE OF A SERIAL NUMBER, A SERIAL NUMBER WAS MADE, BUT THE EXACT SERIAL NUMBER WAS NOT AVAILABLE WHEN THE CATALOG WAS PRINTED. 10-4

6620 COMBINE PC1666

(23-OCT-90) PN=4

Thanks very much for your reading, Want to get more information, Please click here, Then get the complete manual

NOTE: If there is no response to click on the link above, please download the PDF document first, and then click on it.

Have any questions please write to me: admin@servicemanualperfect.com

1A6 6620 COMBINE

DIRECTION ARROW ARROWS ARE USED WITH ILLUSTRATIONS TO INDICATE THE FRONT OF THE UNIT. "RIGHT-HAND" AND "LEFTHAND" SIDES ARE DETERMINED BY FACING IN THE DIRECTION OF MACHINE FORWARD TRAVEL.

BOX-ENCLOSED ILLUSTRATIONS A KEY NUMBER, SHOWN IN THE PARTS LIST, IS ASSIGNED TO A BOX ENCLOSING ALL PARTS SOLD AS A SERVICE ASSEMBLY. A BOX NOT KEYED INCLUDES NON-CURRENT PARTS.

KITS KIT INFORMATION WILL BE FOUND IMMEDIATELY FOLLOWING THE STORY IN WHICH IT IS USED. THE ILLUSTRATION IS REPEATED WITH ONLY THE KIT PARTS CALLED OUT AND WITH ALL OTHER PARTS SHOWN IN PHANTOM FOR RELATIONSHIP.

JDM REMANUFACTURED COMPONENTS THE SERVICE PARTS LISTED IN THIS CATALOG ARE INTENDED FOR THE REPAIR OF ORIGINAL EQUIPMENT COMPONENTS. ALTHOUGH MOST SERVICE PARTS MAY BE USED TO REPAIR REMANUFACTURED COMPONENTS, THE REMANUFACTURED DESIGN MAY CHANGE PARTS SUFFICIENTLY SO THAT SERVICE PARTS ARE INADEQUATE OR NOT USABLE.

BOLT AND CAP SCREW STRENGTH IDENTIFICATION BOLTS AND CAP SCREWS REQUIRED TO HAVE HIGH-STRENGTH QUALITIES EQUIVALENT TO SAE GRADE 8 ARE IDENTIFIED THROUGHOUT THIS CATALOG BY THE DESCRIPTION HS SAE 8. ALL STANDARD BOLTS AND CAP SCREWS ARE SAE GRADE 5 OR LOWER.

COMPLETE GOODS LISTINGS COMPLETE GOODS ARE LISTED IN BOLD FACE TYPE. ORDER SEPARATELY. DO NOT INCLUDE ON REPLACEMENT PARTS ORDER.

SI UNITS OF MEASURE METRIC DIMENSIONS ARE GIVEN, WHERE APPLICABLE, THROUGHOUT THIS PARTS CATALOG.

TRADEMARKS THROUGHOUT THIS PARTS CATALOG, YOU WILL FIND THE FOLLOWING DEERE & COMPANY TRADEMARKS: DIAL-A-MATIC™ HARVESTRAK™ POSI-TORQ™

TORQ-GARD SUPREME® QUIK-TATCH™

CHANGE INDICATOR LINE (MICROFICHE CATALOGS ONLY) CHANGES AFFECTING THE ORDERING OF PARTS ARE IDENTIFIED BY VERTICAL LINES MARKED IN THE LEFT-HAND MARGIN OF REVISED PARTS LISTING IMAGES. A LINE IS ALSO AT THE LEFT-HAND EDGE OF THE SAME PART NUMBER IN THE NUMERICAL INDEX TO SHOW THE LOCATION OF REVISED INFORMATION.

6620 COMBINE PC1666

(23-OCT-90)

10-5

PN=5

1A7 6620 COMBINE

SECTIONAL INDEX SECTION GENERAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 BASIC ENGINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 FUEL AND AIR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 ELECTRICAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 POWER TRAIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 STEERING AND BRAKES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 HYDRAULICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 SEPARATOR SHELL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 OPERATOR’S STATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 HEADERS - REFER TO INDIVIDUAL HEADER PARTS CATALOGS . . . . . . . . . . . . . . . . . . . . . 100 FEEDER HOUSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 SEPARATOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 GRAIN TANK AND UNLOADING AUGER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 MAJOR DRIVES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140 SIDEHILL SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150 HEADER HEIGHT CONTROL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160 DECALS, BELTS AND CHAINS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170 NUMERICAL INDEX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180

10-6

6620 COMBINE PC1666

(23-OCT-90) PN=6

1A8 6620 COMBINE ALPHABETICAL INDEX GRID

PAGE

A 2D2 2C3 4I7 1F7 4C11 1G12 1G13 5E15 5E15 5E3 5E11 5E12 5E15 5E1 5D23 7G3 5D20 1G10 1G11 1G13 1G14 5D18 7F12 2E6 2E12 2E12 2E10 2E8 2E11 2E4 2E4 8F5 2D12 2D12 7D16 7C5 7D1 7C23 3D16 4D4 6E22 6E20 2E14 5D6 1D14 3H22 5D10 1G15 1G16 8C15 8C21 2B15 4G5 4G7 8B18 8C2 8C3 8C23 7G21 7H19 7H20 7G7 7H2

ACCESSORIES, INSTRUMENT PANEL ..............................

ACCUMULATOR PRESSURE GAUGE ................................

ACCUMULATOR,PRESSURE CONTROL VALVE ..............

ADAPTER, ENGINE COOLANT HEATER............................

ADJUSTABLE REAR AXLE, HEAVY-DUTY (FOUR-WHEEL DRIVE) ....................................................

AIR CLEANER ......................................................................

AIR CLEANER TO MANIFOLD ............................................

AIR CONDITIONER EVAPORATOR ....................................

AIR CONDITIONER EXPANSION VALVE............................

AIR CONDITIONER HI PRESSURE SWITCH ....................

AIR CONDITIONER LINES ..................................................

AIR CONDITIONER LINES ..................................................

AIR CONDITIONER LINES ..................................................

AIR CONDITIONING - KIT, O-RING ....................................

AIR CONDITIONING COMPRESSOR ..................................

AIR DUCTS, CLEANING FAN ..............................................

AIR FILTER, CAB..................................................................

AIR INTAKE TUBES (PRECLNR.TO AIR CLNR.) ..............

AIR INTAKE TUBES (PRECLNR.TO AIR CLNR.) ..............

AIR INTAKE TUBES (6466DH-01) ......................................

AIR INTAKE TUBES (6466TH-01)........................................

AIR LOUVER AND PANEL ..................................................

AIRFOIL CHAFFER, NON-ADJUSTABLE ............................

ALTERNATOR (72 AMP) ......................................................

ALTERNATOR ADJUSTING STRAP ....................................

ALTERNATOR BRACKET ....................................................

ALTERNATOR SHEAVE AND BELT....................................

ALTERNATOR, 90 AMP........................................................

ALTERNATOR, 90 AMP........................................................

AM PUSH-BUTTON RADIO ..................................................

AM-FM PUSH-BUTTON RADIO............................................

AMPLIFIER, DIAL-A-MATIC HDR.HGT.CONTROL..............

ANTENNA, PUSH BUTTON RADIO ....................................

ANTENNA, TAPE PLAYER ..................................................

ARM, BEATER DRIVE (DUAL-RANGE CYLINDER DRIVE)(100 PER CENT BEATER SPEED) ....................

ARM, CONCAVE ADJUSTING SHAFT ................................

ARM, DUAL-RANGE CYLINDER DRIVE TIGHTENER ......

ARM, LOCKOUT, DUAL-RANGE CYLINDER DRIVE..........

ARM, PROPULSION-DRIVE ................................................

ARM, STEERING (FOUR-WHEEL DRIVE) ..........................

ARM,F.H.VAR.DR.MIDDLE BELT TGHTNR-SH ..................

ARM,IDLER,FDR.HSE.LOWER BELT TGHTNR-SH ............

ARMATURE, STARTER (DH) ..............................................

ARMREST (PERSONAL POSTURE SEAT) ........................

ARMS, ROCKER (DH) ..........................................................

ARMS, STEERING, CAM LOBE MOTOR ............................

ASH TRAY ............................................................................

ASPIRATOR ..........................................................................

ASPIRATOR ..........................................................................

AUGER AND HOUSING, VERTICAL, GRAIN TANK ..........

AUGER DRIVE GEAR CASE,HORIZONTAL UNLDG. ........

AUGER LIGHT, UNLOADING ..............................................

AUGER SWING HYDRAULIC HOSES,UNLOADING ..........

AUGER SWING HYDRAULIC HOSES,UNLOADING ..........

AUGER SWIVEL SHROUD,HORIZONTAL UNLOADING....

AUGER, CROSS, FRONT, GRAIN TANK ............................

AUGER, CROSS, REAR, GRAIN TANK ..............................

AUGER, HORIZONTAL UNLOADING ..................................

AUGER, LOADING ................................................................

AUGER, LOWER TAILINGS ................................................

AUGER, LOWER TAILINGS ................................................

AUGER, LOWER, CLEAN GRAIN........................................

AUGER, LOWER, DIP AND POUR ELEVATOR ................

6620 COMBINE PC1666

(18-APR-00)

40 - 43 40 - 20 70 - 121 20 - 97 60 - 27 30 - 19 30 - 20 90 - 59 90 - 59 90 - 45 90 - 55 90 - 56 90 - 59 90 - 43 90 - 40 120 - 121 90 - 37 30 - 16 30 - 17 30 - 20 30 - 21 90 - 35 120 - 104 40 - 74 40 - 80 40 - 80 40 - 78 40 - 76 40 - 79 40 - 71 40 - 71 160 - 14 40 - 55 40 - 55 120 - 57 120 - 19 120 - 40 120 - 37 50 - 55 60 - 45 110 - 89 110 - 87 40 - 82 90 - 22 20 - 53 50 - 172 90 - 26 30 - 22 30 - 23 130 - 31 130 - 37 40 - 5 70 - 66 70 - 68 130 - 9 130 - 17 130 - 18 130 - 39 120 - 139 120 - 163 120 - 164 120 - 125 120 - 145

GRID 8C17 8C20 2B14 7I6 8C13 8C11 7H12 7F3 7F7 7F5 8F2 8E19 8E24 8E24 8E24 8F2 8F6 8E19 4C19 3B25 4D3 4D2 3B23 3B24 3C17 3C21 4C22 4C21 4C24 4C16 4C23

AUGER, SWIVEL, HORIZONTAL UNLOADING ..................

AUGER, UNLOADING, LUBE BANK SYSTEM....................

AUGER, UNLOADING, WIRING HARNESS ........................

AUGER, UPPER TAILINGS ..................................................

AUGER, VERTICAL, LOWER GEAR CASE ........................

AUGER,CROSS,DRIVE TIGHTENERS,GRAIN TANK ........

AUGER,LOADING,DIP AND POUR ELEV.GR.TANK ..........

AUGERS, HOUSING, SHOE GRAIN SUPPLY ....................

AUGERS, SHOE GRAIN SUPPLY, DRIVE SHAFT ............

AUGERS, SUPPLY, SHOE GRAIN ......................................

AUTO.HDR.HEIGHT CONTROL WIRING HARNESS..........

AUTO.HEADER HEIGHT CONTROL CHECK BLOCK ........

AUTOMATIC HDR.HGT.CTL.DROP RATE VALVE ............

AUTOMATIC HDR.HGT.CTL.FULL FLOW PLUG ................

AUTOMATIC HDR.HGT.CTL.HYDRAULIC OIL LINE ..........

AUTOMATIC HEADER HEIGHT CONTROL LINKAGE ......

AUTOMATIC HEADER HEIGHT CONTROL SWITCH ........

AUTOMATIC HEADER HEIGHT CONTROL VALVE ..........

AXLE MOUNTING AND T-WEIGHTS, REAR ......................

AXLE SPACERS....................................................................

AXLE SPINDLE HOUSINGS,REAR-(HEAVY-DUTY) ..........

AXLE SPINDLES, REAR ......................................................

AXLE, DRIVE WHEEL ..........................................................

AXLE, DRIVE WHEEL (SH) ..................................................

AXLE, FINAL DRIVE ............................................................

AXLE, FINAL DRIVE (SH) ....................................................

AXLE, REAR (ADJUSTABLE) ..............................................

AXLE, REAR (FIXED) ..........................................................

AXLE, REAR (HEAVY-DUTY AND FOUR-WHL DR.)..........

AXLE, REAR, TRASH SHIELD ............................................

AXLE,REAR (HVY-DUTY AND FOUR-WHL DR.)................

PAGE 130 - 33 130 - 36 40 - 3 120 - 176 130 - 29 130 - 27 120 - 156 120 - 95 120 - 99 120 - 97 160 - 11 160 - 1 160 - 7 160 - 7 160 - 7 160 - 11 160 - 15 160 - 1 60 - 36 50 - 11 60 - 44 60 - 43 50 - 9 50 - 10 50 - 29 50 - 33 60 - 39 60 - 38 60 - 41 60 - 33 60 - 40

B 8B21 7D21 2C7 2C7 3C16 3C20 3H17 3E13 3E15 3E14 3H10 3G12 3G14 3G16 3C17 3C18 3C21 3C22 3C23 3E23 1C20 7I3 7I4 3C8 3C10 3E24 8G5 7D9 7D10 7D12 7D13 7D14

BAFFLE, GRAIN TANK SUMP ............................................

BAR, SHEAR, CYLINDER ....................................................

BATTERY CABLES ..............................................................

BATTERY MOUNTINGS ......................................................

BEARING CAP, FINAL DRIVE ............................................

BEARING CAP, FINAL DRIVE (SH) ....................................

BEARING, CAM LOBE MOTOR ..........................................

BEARING, HYDRO. DR. PUMP (SUNDSTRAND) ..............

BEARING, HYDRO. DRIVE PUMP (EATON) ......................

BEARING, HYDROSTATIC DRIVE (SUNDSTRAND) ..........

BEARINGS, CAM LOBE MOTOR ........................................

BEARINGS, CRAWLER ........................................................

BEARINGS, CRAWLER ........................................................

BEARINGS, CRAWLER DRIVE ............................................

BEARINGS, FINAL DRIVE....................................................

BEARINGS, FINAL DRIVE....................................................

BEARINGS, FINAL DRIVE (SH) ..........................................

BEARINGS, FINAL DRIVE (SH) ..........................................

BEARINGS, FINAL DRIVE (SH) ..........................................

BEARINGS, HYDRO. DR. PUMP (SUNDSTRAND) ............

BEARINGS, MAIN..................................................................

BEARINGS, TAILINGS ELEVATOR CONVEYOR................

BEARINGS, TAILINGS ELEVATOR CONVEYOR................

BEARINGS, TRANSMISSION ..............................................

BEARINGS, TRANSMISSION ..............................................

BEARINGS,HYDRO. DRIVE PUMP (EATON) ....................

BEATER AND CYLINDER TACHOMETER..........................

BEATER AND TACHOMETER DRIVE ................................

BEATER AND TACHOMETER DRIVE ................................

BEATER BEARING LUBE BANK SYSTEM-RH SIDE ........

BEATER BEARING LUBE BANK, LH-HYDRO. ..................

BEATER BEARING LUBE BANK,LH (POSI)........................

130 - 12 120 - 62 40 - 24 40 - 24 50 - 28 50 - 32 50 - 166 50 - 79 50 - 81 50 - 80 50 - 158 50 - 131 50 - 133 50 - 135 50 - 29 50 - 30 50 - 33 50 - 34 50 - 35 50 - 89 20 - 33 120 - 172 120 - 173 50 - 19 50 - 21 50 - 90 170 - 18 120 - 49 120 - 50 120 - 52 120 - 53 120 - 55

10-7

PN=7

1A9 6620 COMBINE ALPHABETICAL INDEX - CONTINUED GRID 7D9 7D10 8G5 7D15 7D17 7D18 7D16 7B21 7D17 7D17 8G5 1G9 8G4 8D20 8D20 7D10 3D21 7H11 5D23 2E10 7B17 7D9 7D10 8G5 7D16 5E4 7C10 8G5 8G18 6E13 6E15 1F8 7G23 4H4 7B17 7E21 8F13 7E19 7E4 7D9 7C9 7G17 8F18 6C20 6E14 6E14 3D6 3D19 3D13 7F7 8G10 8G9 8F24 8G3 8G1 8G2 8F17 8D3 8F15 8F25 8G10 8D10

10-8

BEATER BELT ......................................................................

BEATER BELT ......................................................................

BEATER BELT ......................................................................

BEATER DRIVE ....................................................................

BEATER DRIVE ....................................................................

BEATER DRIVE (DUAL-RANGE CYLINDER DRIVE) ........

BEATER DRIVE, DUAL-RANGE CYLINDER DRIVE (100 PER CENT BEATER SPEED) ................................

BEATER GRATE ..................................................................

BEATER IDLER ....................................................................

BEATER IDLER MOUNTINGS..............................................

BEATER SHEAVE ................................................................

BELL CRANK AND THROTTLE LINKAGE ..........................

BELT AND SHEAVES TORQ-SENSING CTRSHAFT. ........

BELT GUIDES, SEPARATOR DRIVE ..................................

BELT GUIDES, UNLOADING AUGER DRIVE ....................

BELT TACHOMETER DRIVE ..............................................

BELT TENSIONING MECHANISM,HYDROSTATIC DR ......

BELT TIGHTENER, DIP AND POUR ELEVATOR ..............

BELT, AIR CONDITIONING COMPRESSOR ......................

BELT, ALTERNATOR............................................................

BELT, BEATER......................................................................

BELT, BEATER......................................................................

BELT, BEATER......................................................................

BELT, BEATER......................................................................

BELT, BEATER DRIVE (DUAL-RANGE CYLINDER DRIVE)(100 PER CENT BEATER SPEED) ....................

BELT, COMPRESSOR ..........................................................

BELT, CYLINDER DRIVE INTERMEDIATE SHAFT (DUAL-RANGE CYLINDER DRIVE) ................................

BELT, CYLINDER TACHOMETER ......................................

BELT, DRIVE, SECONDARY COUNTERSHAFT ................

BELT, FEEDER HOUSE LOWER SHEAVE-SH ..................

BELT, FEEDER HOUSE LOWER SHEAVES-SH ................

BELT, FLAT ROTARY SCREEN ..........................................

BELT, GEAR CASE, LOADING AUGER..............................

BELT, HYDROSTATIC REEL PUMP....................................

BELT, RASP-BAR CYLINDER ..............................................

BELT, REAR, STRAW CHOPPER ......................................

BELT, ROTARY SCREEN ....................................................

BELT, STRAW CHOPPER DRIVE ......................................

BELT, STRAW SPREADER DRIVE ....................................

BELT, TACHOMETER DRIVE ..............................................

BELT,CYLINDER DRIVE INTERMEDIATE SHAFT..............

BELT,DR.,CTRSHAFT.,CLEAN GRAIN ELEVATOR............

BELT,DRIVE,HYDRAULIC REEL LIFT ................................

BELT,FDR.HSE.LOWER SHAFT (VARIABLE DR) ..............

BELT,FEEDER HOUSE LOWER COUNTERSHAFT-SH ....

BELT,FEEDER HOUSE LOWER SHEAVES-SH ................

BELT,POSI-TORQ DRIVE WHEEL CLUTCH SHEAVE ......

BELT,PROPULSION DR.CTRSHAFT SHV,HYDRO.DR ......

BELT,PROPULSION-DRIVE CTRSHAFT-POSI-TORQ........

BELT,SHOE GRAIN SUPPLY AUGERS DR.SHAFT ..........

BELTS, CLEAN GRAIN ELEVATOR ....................................

BELTS, DRIVE, CLEANING FAN ........................................

BELTS, DRIVE, FEEDER HOUSE (LONG) ........................

BELTS, DRIVE, FEEDER HOUSE (REG FIXED LESS REVERSER) ..........................................................

BELTS, DRIVE, FEEDER HOUSE (REG. FIXED) ..............

BELTS, DRIVE, FEEDER HOUSE (SIDEHILL)....................

BELTS, DRIVE, POSI-TORQ GROUND ..............................

BELTS, ENGINE POWERSHAFT ........................................

BELTS, ENGINE R.H. SIDE..................................................

BELTS, FEEDER HOUSE DRIVE (LONG RICE) ................

BELTS, LOADING AUGER ..................................................

BELTS, PRIMARY COUNTERSHAFT SHEAVES ................

PAGE 120 - 49 120 - 50 170 - 18 120 - 56 120 - 58 120 - 59 120 - 57 120 - 9 120 - 58 120 - 58 170 - 18 30 - 15 170 - 17 140 - 22 140 - 22 120 - 50 50 - 61 120 - 155 90 - 40 40 - 78 120 - 5 120 - 49 120 - 50 170 - 18 120 - 57 90 - 46 120 - 24 170 - 18 170 - 33 110 - 79 110 - 81 20 - 98 120 - 141 70 - 91 120 - 5 120 - 87 170 - 1 120 - 85 120 - 69 120 - 49 120 - 23 120 - 135 170 - 6 110 - 33 110 - 80 110 - 80 50 - 43 50 - 59 50 - 51 120 - 99 170 - 25 170 - 23 170 - 12 170 - 16 170 - 14 170 - 15 170 - 5 140 - 3 170 - 3 170 - 13 170 - 25 140 - 11

GRID 8D11 8G17 8F19 8G8 8F16 5D18 7E25 2D10 7E16 7E17 8E8 6F19 1B16 1B18 1C1 1C3 1C11 1B20 1B24 1C5 1C9 1C13 3G22 6F20 8E19 2C7 2D7 2D7 5D22 1D9 1D11 7G14 4B11 4B12 6E3 6E7 2C21 8E16 5B23 7G14 6F14 6C14 5B19 7C18 7C13 6C12 6C13 2E12 7G12 6C4 6F17 6F14 6F1 1G4 2C4 6F19 6F20 8E5 4I7 2E4 6E22 2C19 6E7

PAGE BELTS, PRIMARY COUNTERSHAFT SHEAVES (DUAL-RANGE CYLINDER DRIVE) ................................

BELTS,DRIVE,ENGINE TO PRIMARY CTRSHAFT.............

BELTS,DRIVE,FEEDER HOUSE (VARIABLE DR.) ............

BELTS,DRIVE,SHOE GRAIN SUPPLY AUGERS ................

BELTS,HYDROSTATIC GROUND DRIVE............................

BEZEL, AIR LOUVER ..........................................................

BLADE, STRAW SPREADER ..............................................

BLADE, WINDSHIELD WIPER ............................................

BLADES AND ROTOR, STRAW CHOPPER ......................

BLADES AND ROTOR, STRAW CHOPPER ......................

BLOCK SOLENOID, MAIN VALVE - SIDEHILL ..................

BLOCK, CABLE, HEADER LEVELING (L.H.)-SH ................

BLOCK, CYLINDER (DH)......................................................

BLOCK, CYLINDER (DH)......................................................

BLOCK, CYLINDER (TH 01) ................................................

BLOCK, CYLINDER (TH 01) ................................................

BLOCK, CYLINDER (TH 05) ................................................

BLOCK, ENGINE SHORT (DH) ............................................

BLOCK, ENGINE SHORT (DH) ............................................

BLOCK, ENGINE SHORT (TH 01) ......................................

BLOCK, ENGINE SHORT (TH 01) ......................................

BLOCK, ENGINE SHORT (TH 05) ......................................

BLOCK, MOTOR CYLINDER (FOUR-WHEEL DRIVE)........

BLOCK,CABLE,HEADER LEVELING,L.H.-SH......................

BLOCK,CHECK,AUTO.HEADER HEIGHT CONTROL ........

BLOWER SWITCH ................................................................

BLOWER SWITCH ................................................................

BLOWER, CAB ROOF WIRING ..........................................

BLOWER, PRESSURIZER....................................................

BOLTS, HEAD (DH) ..............................................................

BOLTS, HEAD (TH) ..............................................................

BOOT, CLEAN GRAIN ELEVATOR HOUSING ..................

BOOT, PARKING BRAKE CONTROL ..................................

BOOT, PARKING BRAKE CONTROL ..................................

BOTTOM SHEETS, FEEDER HOUSE - SIDEHILL ............

BOTTOM, FALSE, FEEDER HOUSE-SH ............................

BOX, CONTROL, LOW SHAFT SPEED MONITORING (AHHC) ..............................................................................

BOX, LEVELING CONTROL ................................................

BOX, TOOL............................................................................

BRACE, CLEAN GRAIN ELEVATOR HOUSING ................

BRACE, FEEDER HOUSE (R.H.)-SH ..................................

BRACE, FEEDER HOUSE MIDDLE BELT ..........................

BRACES, CROSS, SEPARATOR ........................................

BRACES, SUPPORT CYLINDER INTERMEDIATE DRIVE (DUAL-RANGE CYLINDER DRIVE) ....................

BRACES, SUPPORT, CYLINDER DRIVE ............................

BRACES,IDLER,MID.,FDR.HSE.,L.H.(VAR.DR.) ..................

BRACES,IDLER,MID.,FDR.HSE.,L.H.,VAR.DR.SH ......................................................................................

BRACKET, ALTERNATOR....................................................

BRACKET, CLEAN GRAIN ELEVATOR HOUSING ............

BRACKET, FEEDER CONVEYOR DRIVE (FIXED) ............

BRACKET, FEEDER CONVEYOR DRIVE-SH ....................

BRACKET, FEEDER HOUSE (R.H.)-SH ..............................

BRACKET, FEEDER HOUSE LOWER SHAFT-SH ............

BRACKET, FUEL SHUT-OFF (TH) ......................................

BRACKET, HARNESS, REAR CAB ....................................

BRACKET, HEADER LEVELING (L.H.)-SH ........................

BRACKET, HEADER LEVELING, L.H.-SH ..........................

BRACKET, LEVELING CYLINDER PIVOT-SH ....................

BRACKET, MOUNTING,PRESSURE CONTR. VALVE........

BRACKET, RADIO ................................................................

BRACKET,F.H.VAR.DR.MIDDLE BELT TGHTNR-SH..........

BRACKET,FDR.HSE.LOWER SHAFT SPD.SENSOR ........

BRACKET,FDR.HSE.SIDE SHEETS-FRAME-SH ................

6620 COMBINE PC1666

140 - 12 170 - 32 170 - 7 170 - 22 170 - 4 90 - 35 120 - 91 40 - 53 120 - 82 120 - 83 150 - 13 110 - 112 20 - 4 20 - 6 20 - 14 20 - 16 20 - 24 20 - 8 20 - 12 20 - 18 20 - 22 20 - 26 50 - 142 110 - 113 160 - 1 40 - 24 40 - 49 40 - 49 90 - 39 20 - 48 20 - 50 120 - 132 60 - 2 60 - 3 110 - 69 110 - 73 40 - 38 150 - 23 80 - 15 120 - 132 110 - 107 110 - 27 80 - 10 120 - 32 120 - 27 110 - 25 110 - 26 40 - 80 120 - 130 110 - 17 110 - 110 110 - 107 110 - 93 30 - 10 40 - 21 110 - 112 110 - 113 150 - 10 70 - 121 40 - 71 110 - 89 40 - 36 110 - 73

(18-APR-00) PN=8

1A10 6620 COMBINE ALPHABETICAL INDEX - CONTINUED GRID 6F4 6E5 6E15 6F10 6E2 7F19 4B11 4B12 4B14 4B16 4B13 5C21 3G23 4B20 4B17 2C10 3E22 2D2 2C7 1D22 1D23 1E4 1E7

BRACKET,FEEDER CONVEYOR IDLER SHAFT-SH..........

BRACKET,FEEDER HOUSE BOTTOM SHEETS-SH ..........

BRACKET,FEEDER HOUSE LOWER SHEAVES-SH..........

BRACKET,FEEDER HOUSE R.H. SHIELD-SH....................

BRACKET,FEEDER HOUSE TOP SHEETS-SH..................

BRACKETS, CHAFFER FRAME ..........................................

BRAKE CONTROLS, PARKING ..........................................

BRAKE CONTROLS, PARKING ..........................................

BRAKE LINES ......................................................................

BRAKE MASTER CYLINDER ..............................................

BRAKE PEDALS AND LINKAGE..........................................

BRAKE PLATE ......................................................................

BRAKE PLATES (FOUR-WHEEL DRIVE)............................

BRAKE SHOES AND DRUM ................................................

BRAKE SLAVE CYLINDER ..................................................

BREAKER, CIRCUIT ............................................................

BRGS,TRUNNIONS,HYDRO.DR.PUMP SWASHPLATE ....

BUZZER, WARNING ............................................................

BUZZER, WATER TEMPERATURE, SENDING UNIT ........

BYPASS VALVE, OIL COOLER (DH) ..................................

BYPASS VALVE, OIL COOLER (TH 01) ............................

BYPASS VALVE, OIL COOLER (TH 01) ............................

BYPASS VALVE, OIL COOLER (TH 05) ............................

PAGE 110 - 96 110 - 71 110 - 81 110 - 102 110 - 67 120 - 111 60 - 2 60 - 3 60 - 5 60 - 7 60 - 4 90 - 11 50 - 143 60 - 11 60 - 8 40 - 27 50 - 88 40 - 43 40 - 24 20 - 61 20 - 62 20 - 67 20 - 71

C 5D11 5D20 5D14 5D14 5D14 5D15 5D17 2D7 2D7 5D1 5D14 5D12 2C4 3D24 6C18 3E3 3E2 1G9 1G2 1G3 4F15 2E21 3B21 2C7 6F19 6F18 6F20 3H10 3H17 3H10 3H21 3H10 3H17 3H10 3H19 3B16 3C6 1D2 1D3

CAB ........................................................................................

CAB AIR FILTER ..................................................................

CAB COVERS ......................................................................

CAB DOORS ........................................................................

CAB HANDLE ........................................................................

CAB ROOF AND SUPPORTS ..............................................

CAB ROOF HEADLINER ......................................................

CAB ROOF WIRING BLOWER ............................................

CAB ROOF WIRING HARNESS ..........................................

CAB SEAL ............................................................................

CAB SHIELDS ......................................................................

CAB WINDOWS ....................................................................

CAB, REAR, HARNESS BRACKET ....................................

CABLE AND LEVER, HYDRO. DRIVE CONTROL..............

CABLE AND LINKAGE, REVERSER CONTROL ................

CABLE MOUNTING, HYDRO. DR. CONTROL (SUNDSTRAND AND EATON) ........................................

CABLE MOUNTING, HYDRO. DRIVE CONTROL ..............

CABLE SUPPORTS AND THROTTLE LINKAGE ................

CABLE, FUEL SHUT-OFF CONTROL ................................

CABLE, FUEL SHUT-OFF CONTROL ................................

CABLE, VARIABLE CYLINDER CONTROL ........................

CABLE, WIRING....................................................................

CABLES AND MOUNTINGS, GEARSHIFT..........................

CABLES, BATTERY ..............................................................

CABLES, HEADER LEVELING (L.H.)-SH ............................

CABLES, HEADER LEVELING - SIDEHILL ........................

CABLES, HEADER LEVELING, L.H.-SH..............................

CAM LOBE MOTOR AND SEALS........................................

CAM LOBE MOTOR BEARING ............................................

CAM LOBE MOTOR BEARINGS..........................................

CAM LOBE MOTOR DESTROKE PUMP ............................

CAM LOBE MOTOR OUTER COVER ................................

CAM LOBE MOTOR QUILL ..................................................

CAM LOBE MOTOR SHAFT ................................................

CAM LOBE MOTOR YOKE, PIVOTS AND CAPS ..............

CAM, GEARSHIFT LEVER (POSI-TORQ) ..........................

CAM, SHIFTER......................................................................

CAMSHAFT (DH) ..................................................................

CAMSHAFT (TH) ..................................................................

6620 COMBINE PC1666

(18-APR-00)

90 - 27 90 - 37 90 - 31 90 - 31 90 - 31 90 - 32 90 - 34 40 - 49 40 - 49 90 - 17 90 - 31 90 - 29 40 - 21 50 - 65 110 - 31 50 - 68 50 - 67 30 - 15 30 - 8 30 - 9 70 - 51 40 - 90 50 - 7 40 - 24 110 - 112 110 - 111 110 - 113 50 - 158 50 - 166 50 - 158 50 - 171 50 - 158 50 - 166 50 - 158 50 - 168 50 - 2 50 - 17 20 - 40 20 - 41

GRID 1D2 1D3 3H17 1F7 1G15 1G16 4D15 3G24 1H7 1H3 1H5 3F15 3F14 7F10 7F12 7F17 7F19 7F19 7F17 7F19 7H5 7H7 7C7 7G16 6F6 7F22 6C4 6F17 6C2 6D14 6F1 6E13 6F8 6D3 6D12 7E5 7I3 7I4 7H9 8G9 8F20 6F14 8F22 8F21 8F23 5C19 8C4 3F17 3E11 3E12 3E9 8E19 1H14 3H15 7E7 7E8 7E20 7E11 7E12 8F8 2C23

CAMSHAFT GEAR (DH) ......................................................

CAMSHAFT GEAR (TH) ......................................................

CAP, CAM LOBE MOTOR....................................................

CAP, ENGINE COOLANT HEATER ....................................

CAP, EXHAUST RAIN ..........................................................

CAP, EXHAUST RAIN ..........................................................

CAP, HYDRAULIC OIL RESERVOIR ..................................

CARRIER, FIRST PLANET (FOUR-WHEEL DR.)................

CENTER HOUSING, TURBOCHARGER (SCHWITZER) ....

CENTER HOUSING, TURBOCHARGER(AIRESEARCH)....

CENTER HOUSING, TURBOCHARGER(AIRESEARCH)....

CENTER SECTION, HYDRO, DRIVE (EATON) ..................

CENTER SECTION, HYDROSTATIC DRIVE (SUNDSTRAND)................................................................

CHAFFER ..............................................................................

CHAFFER ..............................................................................

CHAFFER FRAME ................................................................

CHAFFER FRAME BRACKETS............................................

CHAFFER FRAME BRACKETS AND SWINGERS..............

CHAFFER FRAME COVER ..................................................

CHAFFER FRAME SWINGERS............................................

CHAIN TIGHTENERS,DIP AND POUR ELEV.LOWER ......

CHAIN TIGHTENERS,DIP AND POUR UPPER ELEV........

CHAIN, CONCAVE ADJUSTING CONTROLS ....................

CHAIN, CONVEYOR, CLEAN GRAIN ELEVATOR ............

CHAIN, CONVEYOR, FEEDER-SH ......................................

CHAIN, CRANK SHOE..........................................................

CHAIN, DRIVE, FEEDER CONVEYOR (FIXED) ................

CHAIN, DRIVE, FEEDER CONVEYOR-SH..........................

CHAIN, FEEDER CONVEYOR ............................................

CHAIN, FEEDER HOUSE LESS REVERSER UPPER SPROCKETS ....................................................................

CHAIN, FEEDER HOUSE LOWER SHAFT-SH ..................

CHAIN, FEEDER HOUSE LOWER SPROCKET-SH ..........

CHAIN, FEEDER HOUSE UPPER SHAFT-SH ....................

CHAIN, FEEDER HOUSE UPPER SPROCKETS................

CHAIN, FEEDER HOUSE UPPER SPROCKETS (WIT H REVERSER) ..................................................................

CHAIN, STRAW WALKER ....................................................

CHAIN, TAILINGS ELEVATOR CONVEYOR ......................

CHAIN, TAILINGS ELEVATOR CONVEYOR ......................

CHAIN,CONVEYOR,DIP AND POUR ELEVATOR ..............

CHAINS, DRIVE, STRAW WALKER ....................................

CHAINS, FEEDER HOUSE (LONG) ....................................

CHAINS, FEEDER HOUSE (R.H.)-SH ................................

CHAINS, FEEDER HOUSE (SIDEHILL) ..............................

CHAINS, FEEDER HOUSE (VARIABLE DRIVE) ................

CHAINS, FEEDER HOUSE-SH ............................................

CHANNEL SUPPORTS ........................................................

CHANNELS, GRAIN TANK ..................................................

CHARGE PRESSURE RELIEF VALVE BLOCK (EATON) ............................................................................

CHARGE PUMP MOUNTING, HYDROSTATIC DRIVE ......

CHARGE PUMP MOUNTING, HYDROSTATIC DRIVE (EATON) ............................................................................

CHARGE PUMP, HYDROSTATIC DRIVE............................

CHECK BLOCK, AUTO.HEADER HEIGHT CONTROL ......

CHECK VALVE, FUEL (TH)..................................................

CHECK VALVES, CAM LOBE MOTOR ..............................

CHOPPER HOUSING, STRAW ............................................

CHOPPER HOUSING, STRAW ............................................

CHOPPER, STRAW, KNIFE AND SUPPORT ....................

CHOPPER, STRAW, PLATE AND FINS..............................

CHOPPER, STRAW, PLATE AND FINS..............................

CIRCUIT BOX, DIAL-A-MATIC CONVERSION ....................

CIRCUIT BOX, DIAL-A-MATIC HEADER HEIGHT CONTROL ..........................................................

PAGE 20 - 40 20 - 41 50 - 166 20 - 97 30 - 22 30 - 23 70 - 2 50 - 144 30 - 43 30 - 38 30 - 40 50 - 106 50 - 105 120 - 102 120 - 104 120 - 109 120 - 111 120 - 111 120 - 109 120 - 111 120 - 149 120 - 151 120 - 21 120 - 134 110 - 98 120 - 115 110 - 17 110 - 110 110 - 15 110 - 52 110 - 93 110 - 79 110 - 100 110 - 40 110 - 50 120 - 71 120 - 172 120 - 173 120 - 153 170 - 23 170 - 8 110 - 107 170 - 10 170 - 9 170 - 11 90 - 9 130 - 19 50 - 109 50 - 77 50 - 78 50 - 75 160 - 1 30 - 50 50 - 164 120 - 73 120 - 74 120 - 86 120 - 77 120 - 78 160 - 18 40 - 40

10-9

PN=9

1A11 6620 COMBINE ALPHABETICAL INDEX - CONTINUED GRID 2C1 2C10 2D5 2D5 6F1 2C4 8G10 7G17 7G19 7G11 7G12 7G14 8G10 7G7 7G9 7F24 7G3 8G9 8G9 7G2 2C6 7G5 2C1 6E24 6E20 6E5 6F12 6E2 6E7 6D24 6D24 5C21 3D2 3D4 3C25 3D6 3D3 3D10 2B19 2E16 1G5 4B22 2E15 5C3 5E6 5E9 5E2 5E7 5E4 5E5 5E7 5E2 2C7 5D23 7C7 7C5 7B21 7C2 5E12 5E11 1B14 1C22 1C23 1C21 1C24 2F1

10-10

CIRCUIT BOX, HARVESTRAK ............................................

CIRCUIT BREAKER AND RELAY PANEL ..........................

CIRCUIT BREAKER, ELECTRIC CLUTCH ..........................

CIRCUIT BREAKER, HARVESTRAK....................................

CLAMP, FEEDER HOUSE LOWER SHAFT-SH..................

CLAMPS, HARNESS, REAR CAB........................................

CLEAN GRAIN ELEVATOR DRIVE......................................

CLEAN GRAIN ELEVATOR DRIVE COUNTERSHAFT ......

CLEAN GRAIN ELEVATOR DRIVE TIGHTENER................

CLEAN GRAIN ELEVATOR HOUSING ................................

CLEAN GRAIN ELEVATOR HOUSING ................................

CLEAN GRAIN ELEVATOR HOUSING BOOT ....................

CLEAN GRAIN ELEVATOR SHEAVES AND BELTS..........

CLEAN GRAIN LOWER AUGER AND HOUSING ..............

CLEAN GRAIN LOWER AUGER HOUSING........................

CLEANING FAN ....................................................................

CLEANING FAN AIR DUCTS ..............................................

CLEANING FAN DRIVE BELTS ..........................................

CLEANING FAN DRIVE SHEAVES......................................

CLEANING FAN HOUSING ..................................................

CLEANING FAN MAGNETIC SENSOR................................

CLEANING FAN SPEED CONTROL....................................

CLEANING SHOE SENSOR ................................................

CLEVIS,F.H.VAR.DRIVE SHEAVE CONTROL-SH ..............

CLEVIS,FDR.HSE.LOWER BELT TIGHTENER-SH ............

CLIP, FEEDER HOUSE BOTTOM SHEETS-SH ................

CLIP, FEEDER HOUSE LEFT-HAND SHIELD-SH ..............

CLIP, FEEDER HOUSE TOP SHEETS-SH ........................

CLIP,FEEDER HOUSE SIDE SHEETS-FRAME-SH ............

CLOSURE, INNER, FEEDER HOUSE-SH ..........................

CLOSURE, OUTER, FEEDER HOUSE-SH..........................

CLUTCH COVER ..................................................................

CLUTCH MASTER CYLINDER ............................................

CLUTCH OIL LINE ................................................................

CLUTCH PEDAL AND LINKAGE..........................................

CLUTCH SHEAVE, DRIVE WHEEL, POSI-TORQ ..............

CLUTCH SLAVE CYLINDER ................................................

CLUTCH, DRIVE WHEEL ....................................................

CLUTCH, HEADER ELECTROMAGNETIC ..........................

COIL, STARTER (DH) ..........................................................

COLD WEATHER STARTING AID ......................................

COLUMN AND WHEEL, STEERING ....................................

COMMUTATOR END FRAME, STARTER ..........................

COMPARTMENT MIDDLE DOOR, ENGINE ........................

COMPRESSOR CLUTCH AND SERVICE VALVE ..............

COMPRESSOR HARDWARE KIT ........................................

COMPRESSOR HARNESS ..................................................

COMPRESSOR KIT ..............................................................

COMPRESSOR MOUNTING AND SUPPORTS ..................

COMPRESSOR MOUNTING AND SUPPORTS ..................

COMPRESSOR PARTS ........................................................

COMPRESSOR RELAY ........................................................

COMPRESSOR WIRING HARNESS ....................................

COMPRESSOR, AIR CONDITIONING ................................

CONCAVE ADJUSTING CONTROLS ..................................

CONCAVE ADJUSTING SHAFT ..........................................

CONCAVE, OPEN-BAR ........................................................

CONCAVE, SPIKE-TOOTH ..................................................

CONDENSER, RECEIVER, AIR CONDITIONER LINES ................................................................................

CONDENSER,RECEIVER,AIR CONDITIONER LINES........

CONDITIONER, COOLANT ..................................................

CONNECTING RODS (DH) ..................................................

CONNECTING RODS (DH) ..................................................

CONNECTING RODS (TH) ..................................................

CONNECTING RODS (TH) ..................................................

CONNECTOR, ELECTRICAL, SERVICE KIT ......................

PAGE 40 - 18 40 - 27 40 - 47 40 - 47 110 - 93 40 - 21 170 - 25 120 - 135 120 - 137 120 - 129 120 - 130 120 - 132 170 - 25 120 - 125 120 - 127 120 - 117 120 - 121 170 - 23 170 - 23 120 - 119 40 - 23 120 - 123 40 - 18 110 - 91 110 - 87 110 - 71 110 - 104 110 - 67 110 - 73 110 - 63 110 - 63 90 - 11 50 - 39 50 - 41 50 - 37 50 - 43 50 - 40 50 - 47 40 - 9 40 - 84 30 - 11 60 - 13 40 - 83 80 - 20 90 - 49 90 - 53 90 - 44 90 - 50 90 - 46 90 - 47 90 - 50 90 - 44 40 - 24 90 - 40 120 - 21 120 - 19 120 - 9 120 - 15 90 - 56 90 - 55 20 - 2 20 - 35 20 - 36 20 - 34 20 - 37 40 - 92

GRID 1H22 2F5 8G24 5D9 5D9 5C25 2C1 8E16 2C21 2C23 3D24 6C18 3E2 3E3 3F13 1G7 4G25 4G25 1G7 8F3 2C1 4F6 8F6 3H1 3H24 4G2 4G4 4H2 3H2 3H25 3F11 3F6 3F7 3F9 4H15 4E8 4E11 4E8 4E11 4E9 4E9 4I7 4F18 4F19 4F21 3H4 3I2 1G2 1G3 7G5 4F15 7C7 4B11 4B12 3D11 7I10 4H12

PAGE CONNECTORS, FUEL INJECTION PUMP HOUSING (TH)....................................................................................

CONNECTORS, SUPPLEMENTARY TERMINALS..............

CONSOLE COVER DECALS................................................

CONSOLE COVERS ............................................................

CONSOLE PANEL ................................................................

CONSOLE, SEAT, FRAME, AND SEALS ............................

CONSOLE,GRAIN LOSS (HARVESTRAK) ..........................

CONTROL BOX, LEVELING ................................................

CONTROL BOX, LOW SHAFT SPEED MONITORING (AHHC) ..............................................................................

CONTROL BOX,LOW SHAFT SPD. MONITORING (DIAL-A-MATIC) ................................................................

CONTROL CABLE AND LEVER, HYDRO. DRIVE..............

CONTROL CABLE AND LINKAGE, REVERSER ................

CONTROL CABLE MOUNTING HYDRO. DRIVE ................

CONTROL CABLE MOUNTING, HYDRO. DR. (SUNDSTRAND AND EATON) ........................................

CONTROL HANDLE,HYDRO.DR.DISPLACEMENT (SUNDSTRAND)................................................................

CONTROL HOUSING, THROTTLE LINKAGE ....................

CONTROL LEVER, HYDRAULIC REEL LIFT......................

CONTROL LEVER, PLATFORM LIFT..................................

CONTROL LEVER, THROTTLE LINKAGE ..........................

CONTROL LINKAGE ............................................................

CONTROL PANEL, HARVESTRAK COMBINE MONITOR ..........................................................................

CONTROL PLUG, FLOW ......................................................

CONTROL SWITCH, AUTOMATIC HEADER HEIGHT ......

CONTROL VALVE (FOUR-WHEEL DRIVE) ........................

CONTROL VALVE (FOUR-WHEEL DRIVE) ........................

CONTROL VALVE KIT, SECONDARY ................................

CONTROL VALVE KIT, SECONDARY ................................

CONTROL VALVE LINKAGE, REEL SPEED ......................

CONTROL VALVE SOLENOID (FOUR-WHEEL DR.) ........

CONTROL VALVE SOLENOID (FOUR-WHEEL DR.) ........

CONTROL VALVE, HYDRO. DR. DISPLACEMENT (EATON) ............................................................................

CONTROL VALVE, HYDRO. DRIVE DISPLACEMENT (SUNDSTRAND)................................................................

CONTROL VALVE, HYDRO. DRIVE DISPLACEMENT (SUNDSTRAND)................................................................

CONTROL VALVE, HYDRO. DRIVE DISPLACEMENT (SUNDSTRAND)................................................................

CONTROL VALVE, HYDROSTATIC DR. REEL FLOW ......

CONTROL VALVE, MAIN HYD. POPPETS-HYDRO...........

CONTROL VALVE, MAIN HYD. POPPETS-HYDRO...........

CONTROL VALVE, MAIN HYD. SPRINGS-HYDRO. ..........

CONTROL VALVE, MAIN HYD. SPRINGS-HYDRO. ..........

CONTROL VALVE, MAIN POPPETS (HYDRO-SH) ............

CONTROL VALVE, MAIN SPRINGS (HYDRO-SH) ............

CONTROL VALVE, PRESSURE ..........................................

CONTROL VALVE, SECONDARY........................................

CONTROL VALVE, SECONDARY........................................

CONTROL VALVE, SECONDARY........................................

CONTROL VALVES, FLOW (FOUR-WHEEL DRIVE) ........

CONTROL VALVES,FLOW (FOUR-WHEEL DRIVE) ..........

CONTROL, FUEL SHUT-OFF ..............................................

CONTROL, FUEL SHUT-OFF ..............................................

CONTROL, SPEED, CLEANING FAN..................................

CONTROL, VARIABLE CYLINDER ......................................

CONTROLS, CONCAVE ADJUSTING ................................

CONTROLS, PARKING BRAKE ..........................................

CONTROLS, PARKING BRAKE ..........................................

CONTROLS, POSI-TORQ GROUND SPEED......................

CONTROLS, SEPARATOR DRIVE ......................................

CONVERSION HOSES AND COUPLERS ..........................

6620 COMBINE PC1666

30 - 60 40 - 96 170 - 39 90 - 25 90 - 25 90 - 15 40 - 18 150 - 23 40 - 38 40 - 40 50 - 65 110 - 31 50 - 67 50 - 68 50 - 104 30 - 13 70 - 87 70 - 87 30 - 13 160 - 12 40 - 18 70 - 42 160 - 15 50 - 146 50 - 174 70 - 63 70 - 65 70 - 89 50 - 147 50 - 176 50 - 102 50 - 97 50 - 98 50 - 100 70 - 103 70 - 19 70 - 22 70 - 19 70 - 22 70 - 20 70 - 20 70 - 121 70 - 55 70 - 56 70 - 58 50 - 149 50 - 179 30 - 8 30 - 9 120 - 123 70 - 51 120 - 21 60 - 2 60 - 3 50 - 49 120 - 181 70 - 100

(18-APR-00) PN=10

1A12 6620 COMBINE ALPHABETICAL INDEX - CONTINUED GRID 8F8 7G16 6F6 1B14 1F6 1E10 1F7 5E11 5B25 8G18 8D16 3D13 8D10 8D11 6E15 8D5 3D16 8D14 3C8 8B24 7G17 7H10 6E14 6E16 8F18 3D17 7H2 6C24 3E8 6B14 6B15 4H10 2C9 7F17 5C21 7C20 3G24 3E15 3E14 3E13 3H15 3H10 1D13 2E19 1D4 1C25 5D16 5D14 5D9 7D20 8C5 8C6 8C4 1G9 1G13 1D13 1C19 7F22 1C17 1D1

PAGE CONVERSION, DIAL-A-MATIC HEADER HEIGHT CONTROL ........................................................................

CONVEYOR CHAIN, CLEAN GRAIN ELEVATOR ..............

CONVEYOR CHAIN, FEEDER-SH ......................................

COOLANT CONDITIONER....................................................

COOLANT HEATER, ENGINE..............................................

COOLER, ENGINE OIL ........................................................

CORD, ENGINE COOLANT HEATER..................................

CORE, VALVE ......................................................................

CORNER FRAME ..................................................................

COUNTERSHAFT DRIVE......................................................

COUNTERSHAFT DRIVE IDLER, SECONDARY ................

COUNTERSHAFT SHEAVE, PROPULSION-DRIVE............

COUNTERSHAFT SHEAVES, PRIMARY ............................

COUNTERSHAFT SHEAVES, PRIMARY (DUALRANGE CYLINDER DRIVE) ............................................

COUNTERSHAFT, LOWER, FEEDER HOUSE-SH ............

COUNTERSHAFT, PRIMARY AND MOUNTINGS ..............

COUNTERSHAFT, PROPULSION-DRIVE............................

COUNTERSHAFT, SECONDARY ........................................

COUNTERSHAFT, TRANSMISSION ....................................

COUNTERSHAFT, UNLOADING AUGER ............................

COUNTERSHAFT,DRIVE,CLEAN GRAIN ELEVATOR........

COUNTERSHAFT,DRIVE,DIP AND POUR ELEVATOR......

COUNTERSHAFT,FEEDER HOUSE LOWER-SH ..............

COUNTERSHAFT,FEEDER HOUSE UPPER-SH ................

COUNTERSHAFT,PRIMARY TO HYD.REEL LIFT ..............

COUNTERSHAFT,PROPULSION DRIVE-POSI-TORQ........

COUNTERSHAFT,UPPER,DIP AND POUR ELEVATOR ....

COUNTERSHAFT,UPPER,FDR.HSE.-VARIABLE DR. ........

COUPLER, HYDROSTATIC DRIVE MOTOR ......................

COUPLER, QUIK-TATCH (L.H.) ..........................................

COUPLER, QUIK-TATCH (R.H.) ..........................................

COUPLERS AND HOSES FOR COMBINES ......................

COVER PLATES,ELEC.,ENGINE COMPT.FIREWALL ........

COVER, CHAFFER FRAME ................................................

COVER, CLUTCH..................................................................

COVER, DUAL-RANGE AND CYLINDER GEAR CASE ................................................................................

COVER, FIRST PLANET (FOUR-WHEEL DR.) ..................

COVER, FRONT, HYDRO. DRIVE PUMP (EATON) ..........

COVER, FRONT, HYDROSTATIC DRIVE (SUNDSTRAND)................................................................

COVER, FRONT, HYDROSTATIC DRIVE PUMP (SUNDSTRAND)................................................................

COVER, INNER ....................................................................

COVER, OUTER, CAM LOBE MOTOR................................

COVER, ROCKER ARM (DH) ..............................................

COVER, STARTER SOLENOID (DH) ..................................

COVER, TACHOMETER DRIVE GEAR ..............................

COVER, TIMING GEAR ........................................................

COVERS AND INNER ROOF ..............................................

COVERS, CAB ......................................................................

COVERS, CONSOLE ............................................................

COVERS, CYLINDER............................................................

COVERS, GRAIN TANK FRONT AND REAR, ADJUSTABLE....................................................................

COVERS, GRASS SEED UNLOADING AUGER ................

COVERS,GRAIN TANK INNER UNLOADING AUGER ......

CRANK, BELL........................................................................

CRANKCASE VENT TUBE ..................................................

CRANKCASE VENTILATOR TUBE (DH) ............................

CRANKSHAFT ......................................................................

CRANKSHAFT DRIVE TIGHTENER, SHOE ........................

CRANKSHAFT KIT, UNDERSIZE CONNECTING ROD JOURNAL (DH) ..............................

CRANKSHAFT OIL SEAL ....................................................

6620 COMBINE PC1666

(18-APR-00)

160 - 18 120 - 134 110 - 98 20 - 2 20 - 96 20 - 74 20 - 97 90 - 55 80 - 17 170 - 33 140 - 17 50 - 51 140 - 11 140 - 12 110 - 81 140 - 5 50 - 55 140 - 15 50 - 19 130 - 15 120 - 135 120 - 154 110 - 80 110 - 82 170 - 6 50 - 56 120 - 145 110 - 37 50 - 74 110 - 2 110 - 3 70 - 98 40 - 26 120 - 109 90 - 11 120 - 34 50 - 144 50 - 81 50 - 80 50 - 79 50 - 164 50 - 158 20 - 52 40 - 87 20 - 42 20 - 38 90 - 33 90 - 31 90 - 25 120 - 61 130 - 20 130 - 21 130 - 19 30 - 15 30 - 20 20 - 52 20 - 32 120 - 115 20 - 30 20 - 39

GRID 1D1 1C19 7E2 7E4 1C18 3G12 3G14 3G16 3G16 3G16 3G11 3G12 3G11 3G12 3G14 3G10 3G14 3G10 3G10 8C11 8G16 8C2 8C3 5B19 7D5 7E15 7D22 5D5 3E17 3E18 3E20 7D5 7D4 7D7 1B16 1B18 1C1 1C3 1C11 3G22 7D20 7D20 5B10 7C9 7C10 7C13 7C15 1D9 1D11 1D9 1D11 1F1 1E23 4I4 4I5 1B14 1C22 1C23 1C21 1C24 8E5 7D3 7D6 7D21 7C4 8G5

CRANKSHAFT OIL SEAL HOUSING ..................................

CRANKSHAFT PULLEY........................................................

CRANKSHAFT, STRAW WALKER FRONT ........................

CRANKSHAFT, STRAW WALKER REAR............................

CRANKSHAFT, UNDERSIZE MAIN BEARING (DH) ..........

CRAWLER BEARINGS..........................................................

CRAWLER BEARINGS..........................................................

CRAWLER DRIVE BEARINGS ............................................

CRAWLER DRIVE SHIELD ..................................................

CRAWLER DRIVE SPROCKET............................................

CRAWLER FRAME, R.H. AND L.H. ....................................

CRAWLER IDLER..................................................................

CRAWLER ROLLERS ..........................................................

CRAWLER SHAFT ................................................................

CRAWLER SHAFTS ..............................................................

CRAWLER SHOES ..............................................................

CRAWLER TIGHTENER ......................................................

CRAWLER TRACKS..............................................................

CRAWLER TRACKS AND SHOES ......................................

CROSS AUGER DRIVE TIGHTENERS,GRAIN TANK ........

CROSS AUGER DRIVES......................................................

CROSS AUGER, FRONT, GRAIN TANK ............................

CROSS AUGER, REAR, GRAIN TANK ..............................

CROSS BRACES, SEPARATOR..........................................

CTRSHAFT,CYL.DRIVE BRG.HSG.LUBE BANK-RH ..........

CURTAIN AND SHIELDS, STRAW CHOPPER ..................

CURTAINS, SEPARATOR ....................................................

CUSHIONS, SEAT (PERSONAL POSTURE) ......................

CYL. BLOCK, HYDRO. DR. PUMP(SUNDSTRAND) ..........

CYL. BLOCK, HYDRO. DR. PUMP(SUNDSTRAND) ..........

CYL. BLOCK, HYDRO. DRIVE PUMP (EATON) ................

CYL.DR.CTRSHAFT.BRG.HSG.LUBE BANK-RH ................

CYL.SHAFT BRG.HSG.LUBE BANK (R.H.) ........................

CYL.SHAFT BRG.LUBE BANK SYS.,L.H.(POSI) ................

CYLINDER BLOCK (DH) ......................................................

CYLINDER BLOCK (DH) ......................................................

CYLINDER BLOCK (TH 01)..................................................

CYLINDER BLOCK (TH 01)..................................................

CYLINDER BLOCK (TH 05)..................................................

CYLINDER BLOCK, MOTOR (FOUR-WHEEL DRIVE)........

CYLINDER COVER DEFLECTOR ........................................

CYLINDER COVERS ............................................................

CYLINDER DOOR SEALS ....................................................

CYLINDER DRIVE INTERMEDIATE SHAFT........................

CYLINDER DRIVE INTERMEDIATE SHAFT (DUAL-RANGE CYLINDER DRIVE) ................................

CYLINDER DRIVE SUPPORT BRACES..............................

CYLINDER DRIVE TIGHTENER ..........................................

CYLINDER HEAD (DH) ........................................................

CYLINDER HEAD (TH) ........................................................

CYLINDER HEAD GASKET (DH) ........................................

CYLINDER HEAD GASKET (TH) ........................................

CYLINDER HEAD GASKET KIT (TH) ..................................

CYLINDER HEAD GASKET SET (DH) ................................

CYLINDER KIT, HEADER LIFT HYDRAULIC......................

CYLINDER KIT, HEADER LIFT HYDRAULIC-SH................

CYLINDER LINER PACKING LUBRICANT..........................

CYLINDER LINERS (DH) ......................................................

CYLINDER LINERS (DH) ......................................................

CYLINDER LINERS (TH) ......................................................

CYLINDER LINERS (TH) ......................................................

CYLINDER PIVOT BRACKET, LEVELING-SH ....................

CYLINDER SHAFT BRG.HSG.LUBE BANK-RH SIDE ........

CYLINDER SHAFT BRG.LUBE BANK,LH (HYDRO) ..........

CYLINDER SHEAR BAR ......................................................

CYLINDER SPEED TACHOMETER ....................................

CYLINDER TACHOMETER AND BEATER..........................

PAGE 20 - 39 20 - 32 120 - 67 120 - 69 20 - 31 50 - 131 50 - 133 50 - 135 50 - 135 50 - 135 50 - 129 50 - 131 50 - 129 50 - 131 50 - 133 50 - 128 50 - 133 50 - 128 50 - 128 130 - 27 170 - 31 130 - 17 130 - 18 80 - 10 120 - 44 120 - 81 120 - 63 90 - 21 50 - 83 50 - 84 50 - 86 120 - 44 120 - 43 120 - 47 20 - 4 20 - 6 20 - 14 20 - 16 20 - 24 50 - 142 120 - 61 120 - 61 80 - 1 120 - 23 120 - 24 120 - 27 120 - 29 20 - 48 20 - 50 20 - 48 20 - 50 20 - 90 20 - 88 70 - 118 70 - 119 20 - 2 20 - 35 20 - 36 20 - 34 20 - 37 150 - 10 120 - 42 120 - 45 120 - 62 120 - 17 170 - 18

10-11 PN=11

1A13 6620 COMBINE ALPHABETICAL INDEX - CONTINUED GRID 8G5 8G5 4B16 4B17 3D2 3D3 4I3 4I2 7C18 8D25 8D23 8D11 7B17 7B18 7B23 7B24 4H24 4G10 4C14 4C12 4C12 4C14 4G11 4G13 4G15

CYLINDER TACHOMETER BELT ........................................

CYLINDER TACHOMETER SHEAVE ..................................

CYLINDER, BRAKE MASTER ..............................................

CYLINDER, BRAKE SLAVE..................................................

CYLINDER, CLUTCH MASTER ............................................

CYLINDER, CLUTCH SLAVE ..............................................

CYLINDER, HEADER LIFT HYDRAULIC-SH ......................

CYLINDER, HYDRAULIC, HEADER LIFT ............................

CYLINDER, INTERMEDIATE DRIVE SUPPORT BRACES (DUAL-RANGE CYLINDER DRIVE) ................

CYLINDER, LEVELING (SH) ................................................

CYLINDER, LEVELING-SH ..................................................

CYLINDER, PRIMARY COUNTERSHAFT SHEAVES (DUAL-RANGE CYLINDER DRIVE) ................................

CYLINDER, RASP-BAR ........................................................

CYLINDER, RASP-BAR (DUAL-RANGE CYLINDER DRIVE) ..............................................................................

CYLINDER, SPIKE-TOOTH ..................................................

CYLINDER, SPIKE-TOOTH (DUAL-RANGE CYLINDER DRIVE) ..........................................................

CYLINDER,HYD.,VARIABLE DRIVE FDR.HSE-SH ............

CYLINDER,HYDRAULIC,UNLOADING AUGER SWING ....

CYLINDER,STEERING (FOUR-WHEEL DRIVE)..................

CYLINDER,STEERING-ADJUSTABLE REAR AXLE............

CYLINDER,STEERING-FIXED REAR AXLE ........................

CYLINDER,STEERING-HVY.DUTY REAR AXLE (FOUR-WHEEL DRIVE) ....................................................

CYLINDER,UNLOADING AUGER SWING HYDRAULIC ....

CYLINDER,UNLOADING AUGER SWING HYDRAULIC ....

CYLINDER,UNLOADING AUGER SWING HYDRAULIC ....

PAGE 170 - 18 170 - 18 60 - 7 60 - 8 50 - 39 50 - 40 70 - 117 70 - 116 120 - 32 150 - 5 150 - 3 140 - 12 120 - 5 120 - 6 120 - 11 120 - 13 70 - 112 70 - 71 60 - 30 60 - 28 60 - 28 60 - 30 70 - 72 70 - 74 70 - 76

D 8G25 8G24 8G22 8G24 8G19 8H1 8D18 7D20 6D24 3H21 8F7 8F5 2C23 8F3 8F8 2C23 3C6 3C11 3C13 3C5 3C6 3C5 2E6 2E8 7H9 7H12 7H5 7H7 7H13 7H13 7H13

10-12

DECAL, PANEL ....................................................................

DECALS, CONSOLE COVER ..............................................

DECALS, FRONT AND REAR..............................................

DECALS, INSTRUMENT PANEL..........................................

DECALS, RIGHT-HAND AND LEFT-HAND..........................

DECALS, SEPARATOR ........................................................

DECLUTCHING IDLER..........................................................

DEFLECTOR, CYLINDER COVER ......................................

DEFLECTOR, FEEDER HOUSE-SH ....................................

DESTROKE PUMP, CAM LOBE MOTOR............................

DIAL-A-MATIC HDR.HGT.CONTROL SWITCH....................

DIAL-A-MATIC HDR.HGT.CONTROL,AMPLIFIER ..............

DIAL-A-MATIC HEADER HEIGHT CONTROL ....................

DIAL-A-MATIC HEADER HEIGHT CONTROL ....................

DIAL-A-MATIC HEADER HEIGHT CONTROL CONVERSION ..................................................................

DIAL-A-MATIC HEADER HEIGHT CONTROL, CIRCUIT BOX ..................................................................

DIFFERENTIAL GASKET ......................................................

DIFFERENTIAL GEARS AND SHAFTS ..............................

DIFFERENTIAL GEARS AND SHAFTS ..............................

DIFFERENTIAL HOUSING....................................................

DIFFERENTIAL HOUSING COVER ....................................

DIFFERENTIAL SHIFTER FORKS ......................................

DIODE RING, ALTERNATOR, 72 AMP................................

DIODE TRIO ASSEMBLY,ALTERNATOR,90 AMP..............

DIP AND POUR ELEV.CONV. UPPER SPROCKETS ........

DIP AND POUR ELEV.GR.TANK LOADING AUGER ........

DIP AND POUR ELEV.LOWER CHAIN TIGHTENERS ......

DIP AND POUR ELEV.UPPER CHAIN TIGHTENERS........

DIP AND POUR ELEVATOR AUGER EXTENSION............

DIP AND POUR ELEVATOR AUGER HOUSING................

DIP AND POUR ELEVATOR AUGER SHIELD....................

170 - 40 170 - 39 170 - 37 170 - 39 170 - 34 170 - 41 140 - 19 120 - 61 110 - 63 50 - 171 160 - 17 160 - 14 40 - 40 160 - 12 160 - 18 40 - 40 50 - 17 50 - 22 50 - 24 50 - 16 50 - 17 50 - 16 40 - 74 40 - 76 120 - 153 120 - 156 120 - 149 120 - 151 120 - 157 120 - 157 120 - 157

GRID 7H11 7H9 7H10 8G12 8G12 7H2 7H4 8G12 7H15 7H16 7H7 7H2 1D5 1D7 1D5 1D7 8F13 3F11 3F7 3F9 3F6 1F11 8E10 8E11 8E10 8E11 2D8 7G11 7G14 7G9 5C2 5C3 6E2 8B12 8B14 8B20 5C21 5D9 5C8 7B15 7B21 5C23 7H25 7I1 6E2 6E2 5D14 5B10 6D25 8G18 5E15 1F17 1F13 8F18 6C5 6C4 6F17 7G17 8D19 8D16 3E8 3E8 4H7

DIP AND POUR ELEVATOR BELT TIGHTENER................

DIP AND POUR ELEVATOR CONVEYOR CHAIN ............

DIP AND POUR ELEVATOR DRIVE COUNTERSHAFT ....

DIP AND POUR ELEVATOR DRIVE SHEAVES ................

DIP AND POUR ELEVATOR DRIVE SPROCKETS ............

DIP AND POUR ELEVATOR LOWER AUGER ..................

DIP AND POUR ELEVATOR LOWER HOUSING ..............

DIP AND POUR ELEVATOR TIGHTENERS........................

DIP AND POUR ELEVATOR TOP HOOD ..........................

DIP AND POUR ELEVATOR TOP SHIELD ........................

DIP AND POUR ELEVATOR UPPER CHAIN IDLERS ......

DIP AND POUR ELEVATOR UPPER COUNTERSHAFT ..

DIPSTICK TUBE (DH) ..........................................................

DIPSTICK TUBE (TH) ..........................................................

DIPSTICK, ENGINE OIL (DH) ..............................................

DIPSTICK, ENGINE OIL (TH) ..............................................

DISK, ROTARY SCREEN ....................................................

DISPLACEMENT CONTROL VALVE, HYDRO. DR. (EATON) ............................................................................

DISPLACEMENT CONTROL VALVE, HYDRO. DRIVE (SUNDSTRAND)................................................................

DISPLACEMENT CONTROL VALVE, HYDRO. DRIVE (SUNDSTRAND)................................................................

DISPLACEMENT CONTROL VALVE, HYDRO. DRIVE (SUNSTRAND) ..................................................................

DISPLACER, ROTARY SCREEN DRIVE BELT ..................

DIVIDER MOUNTING, FLOW - SIDEHILL ..........................

DIVIDER MOUNTING, FLOW - SIDEHILL ..........................

DIVIDER VALVE, FLOW - SIDEHILL ..................................

DIVIDER VALVE, FLOW - SIDEHILL ..................................

DOME LIGHT ........................................................................

DOOR, CLEAN GRAIN ELEVATOR ....................................

DOOR, CLEAN GRAIN ELEVATOR HOUSING ..................

DOOR, CLEAN GRAIN LOWER AUGER ............................

DOOR, ENGINE COMPARTMENT ......................................

DOOR, ENGINE COMPARTMENT MIDDLE ........................

DOOR, FRONT, FEEDER HOUSE TOP SHEETS-SH ........

DOOR, GRAIN TANK............................................................

DOOR, GRAIN TANK............................................................

DOOR, GRAIN TANK............................................................

DOOR, INSPECTION, OPERATOR’S PLATFORM..............

DOOR, PANEL ......................................................................

DOOR, ROTARY SCREEN ..................................................

DOOR, STONE TRAP ..........................................................

DOOR, STONE TRAP ..........................................................

DOOR, TAILINGS ELEVATOR ............................................

DOOR, TAILINGS ELEVATOR ............................................

DOOR, TAILINGS ELEVATOR ............................................

DOOR,CENTER,FEEDER HOUSE TOP SHEETS-SH ........

DOOR,REAR,FEEDER HOUSE TOP SHEETS-SH ............

DOORS, CAB ........................................................................

DOORS, CYLINDER, SEPARATOR ....................................

DOORS, FEEDER HOUSE - SIDEHILL ..............................

DR.,PRIMARY CTRSHFT TO SECONDARY CTRSHFT ....

DRAIN TUBES, EVAPORATOR ..........................................

DRIVE BELT TIGHTENER,RADIATOR FAN........................

DRIVE BELT TIGHTENER,ROTARY SCREEN....................

DRIVE BELT,HYDRAULIC REEL LIFT ................................

DRIVE CHAIN GUIDES, FEEDER CONVEYOR..................

DRIVE CHAIN, FEEDER CONVEYOR (FIXED) ..................

DRIVE CHAIN, FEEDER CONVEYOR-SH ..........................

DRIVE COUNTERSHAFT,CLEAN GRAIN ELEVATOR ......

DRIVE IDLER, FEEDER HOUSE ........................................

DRIVE IDLER, SECONDARY COUNTERSHAFT ................

DRIVE MOTOR COUPLER, HYDROSTATIC ......................

DRIVE MOTOR MOUNTING, HYDROSTATIC ....................

DRIVE REEL HYDRAULIC HOSES ....................................

6620 COMBINE PC1666

PAGE 120 - 155 120 - 153 120 - 154 170 - 27 170 - 27 120 - 145 120 - 147 170 - 27 120 - 159 120 - 160 120 - 151 120 - 145 20 - 44 20 - 46 20 - 44 20 - 46 170 - 1 50 - 102 50 - 98 50 - 100 50 - 97 20 - 101 150 - 16 150 - 17 150 - 16 150 - 17 40 - 51 120 - 129 120 - 132 120 - 127 80 - 19 80 - 20 110 - 67 130 - 3 130 - 5 130 - 11 90 - 11 90 - 25 80 - 25 120 - 3 120 - 9 90 - 13 120 - 169 120 - 170 110 - 67 110 - 67 90 - 31 80 - 1 110 - 65 170 - 33 90 - 59 20 - 107 20 - 103 170 - 6 110 - 18 110 - 17 110 - 110 120 - 135 140 - 21 140 - 17 50 - 74 50 - 74 70 - 94

(18-APR-00) PN=12

1A14 6620 COMBINE ALPHABETICAL INDEX - CONTINUED GRID 6D19 6D20 7F7 8F18 7F9 7G19 7C15 8C11 3B22 3B23 3B24 3D10 3D8 3D8 3D10 7D15 7D17 7D18 7D16 8G10 6D8 8G10 7C17 8G16 8G7 8G7 8G14 8G16 8G16 8E24 4B20 6C1 6F4 7D18 7C24 7C23 7C22 7D1 7D16 7C20 7G3

DRIVE SHAFT, HEADER - SIDEHILL..................................

DRIVE SHAFT, HEADER-SIDEHILL ....................................

DRIVE SHAFT, SHOE GRAIN SUPPLY AUGERS..............

DRIVE SHEAVES,HYDRAULIC REEL LIFT ........................

DRIVE TGHTNR.,SHOE GR.SUPPLY AUGERS ................

DRIVE TIGHTENER, CLEAN GRAIN ELEVATOR ..............

DRIVE TIGHTENER, CYLINDER..........................................

DRIVE TIGHTENERS,CROSS AUGER,GRAIN TANK ........

DRIVE WHEEL AND SPACERS ..........................................

DRIVE WHEEL AXLE............................................................

DRIVE WHEEL AXLE (SH) ..................................................

DRIVE WHEEL CLUTCH ......................................................

DRIVE WHEEL CLUTCH HOUSING ....................................

DRIVE WHEEL CLUTCH THROW-OUT CONTROLS ........

DRIVE WHEEL SHAFT ........................................................

DRIVE, BEATER....................................................................

DRIVE, BEATER....................................................................

DRIVE, BEATER (DUAL-RANGE CYLINDER DRIVE) ..............................................................................

DRIVE, BEATER, DUAL-RANGE CYLINDER DRIVE (100 PER CENT BEATER SPEED) ................................

DRIVE, CLEAN GRAIN ELEVATOR ....................................

DRIVE, FIXED ......................................................................

DRIVE, LOADING AUGER....................................................

DRIVE, SLOW SPEED CYLINDER ......................................

DRIVES, CROSS AUGER ....................................................

DRIVES, STRAW CHOPPER ..............................................

DRIVES, STRAW SPREADER ............................................

DRIVES, TAILINGS ELEVATOR AND AUGER....................

DRIVES, UNLOADING AUGER ............................................

DRIVES, VERTICAL UNLOADING AUGER ........................

DROP RATE VALVE,AUTO.HDR.HGT.CONTROL ..............

DRUM, BRAKE SHOES ........................................................

DRUM, FEEDER CONVEYOR..............................................

DRUM, FEEDER-SH..............................................................

DUAL-RANGE CYLINDER DRIVE (BEATER DRIVE) ........

DUAL-RANGE CYLINDER DRIVE GEAR CASE SHIELD ..............................................................................

DUAL-RANGE CYLINDER DRIVE LOCKOUT ARM............

DUAL-RANGE CYLINDER DRIVE PINION GEARS ............

DUAL-RANGE CYLINDER DRIVE TIGHTENER..................

DUAL-RANGE CYLINDER DRIVE, BEATER DRIVE (100 PER CENT BEATER SPEED) ................................

DUAL-RANGE CYLINDER GEAR CASE ............................

DUCTS, AIR, CLEANING FAN ............................................

PAGE 110 - 57 110 - 59 120 - 99 170 - 6 120 - 101 120 - 137 120 - 29 130 - 27 50 - 8 50 - 9 50 - 10 50 - 47 50 - 45 50 - 45 50 - 47 120 - 56 120 - 58 120 - 59 120 - 57 170 - 25 110 - 45 170 - 25 120 - 31 170 - 31 170 - 21 170 - 21 170 - 29 170 - 31 170 - 31 160 - 7 60 - 11 110 - 14 110 - 96 120 - 59 120 - 39 120 - 37 120 - 36 120 - 40 120 - 57 120 - 34 120 - 121

E 2D5 2D2 8F3 2F1 2B19 1G12 7G12 7G11 7H25 2E15 5C3 5C5 5B25 5C2 5C6 2C7 2C9 1F6

ELECTRIC CLUTCH CIRCUIT BREAKER ..........................

ELECTRIC CLUTCH SWITCH ..............................................

ELECTRIC HARNESS ..........................................................

ELECTRICAL CONNECTOR SERVICE KIT ........................

ELECTROMAGNETIC CLUTCH, HEADER ..........................

ELEMENT, AIR CLEANER....................................................

ELEVATOR, CLEAN GRAIN HOUSING ..............................

ELEVATOR, HOUSING, CLEAN GRAIN..............................

ELEVATOR, HOUSING, TAILINGS ......................................

END FRAME, STARTER COMMUTATOR ..........................

ENGINE COMPARTMENT MIDDLE DOOR ........................

ENGINE COMPARTMENT PANEL, FRONT ........................

ENGINE COMPARTMENT REAR SHEET ..........................

ENGINE COMPARTMENT UPPER DOOR ..........................

ENGINE COMPARTMENT WALKWAY ................................

ENGINE COMPARTMENT WIRING HARNESS ..................

ENGINE COMPT.FIREWALL ELEC.COVER PLATES ........

ENGINE COOLANT HEATER ..............................................

6620 COMBINE PC1666

(18-APR-00)

40 - 47 40 - 43 160 - 12 40 - 92 40 - 9 30 - 19 120 - 130 120 - 129 120 - 169 40 - 83 80 - 20 80 - 22 80 - 17 80 - 19 80 - 23 40 - 24 40 - 26 20 - 96

GRID 1F7 1B13 1E10 1D5 1D7 1E8 1F18 1D17 1D19 1D23 1E1 1E5 1C15 8D3 8F15 8F15 8F15 1F4 1F1 1E23 1B20 1B24 1C5 1C9 1C13 1B15 1F4 1D15 1D15 8G17 1B14 2D2 5E15 5E15 1E22 1E21 1E22 1E21 1G15 1G16 1D9 1D11 5E15 7H13 1F4 8B20 6F1 6E2 6F4 7C18

ENGINE COOLANT HEATER ..............................................

ENGINE OIL ..........................................................................

ENGINE OIL COOLER ..........................................................

ENGINE OIL DIPSTICK (DH) ..............................................

ENGINE OIL DIPSTICK (TH)................................................

ENGINE OIL FILTER (DH)....................................................

ENGINE OIL PRESSURE GAUGE LINE ............................

ENGINE OIL PUMP (DH)......................................................

ENGINE OIL PUMP (DH)......................................................

ENGINE OIL PUMP (TH 01) ................................................

ENGINE OIL PUMP (TH 01) ................................................

ENGINE OIL PUMP (TH 05) ................................................

ENGINE OVERHAUL KIT......................................................

ENGINE POWERSHAFT ......................................................

ENGINE R.H. SIDE BELT TIGHTENERS ............................

ENGINE R.H. SIDE BELTS ..................................................

ENGINE R.H. SIDE SHEAVES ............................................

ENGINE RAIL EXTENSION ..................................................

ENGINE REBUILD GASKET KIT (TH) ................................

ENGINE REBUILD GASKET SET (DH) ..............................

ENGINE SHORT BLOCK (DH) ............................................

ENGINE SHORT BLOCK (DH) ............................................

ENGINE SHORT BLOCK (TH 01) ........................................

ENGINE SHORT BLOCK (TH 01) ........................................

ENGINE SHORT BLOCK (TH 05) ........................................

ENGINE SHORT BLOCK SERIAL NUMBER PLATE ..........

ENGINE SUPPORTS ............................................................

ENGINE TEMPERATURE SENDER (DH)............................

ENGINE TEMPERATURE SWITCH (DH) ............................

ENGINE TO PRIMARY CTRSHAFT.DRIVE BELTS ............

ENGINE VALVE STEM LUBRICANT....................................

ETHER START SWITCH ......................................................

EVAPORATOR ......................................................................

EVAPORATOR DRAIN TUBES ............................................

EXHAUST MANIFOLD (TH) ..................................................

EXHAUST MANIFOLD GASKETS (DH) ..............................

EXHAUST MANIFOLD GASKETS (TH)................................

EXHAUST MANIFOLDS (DH) ..............................................

EXHAUST PIPE ....................................................................

EXHAUST PIPE ....................................................................

EXHAUST VALVES (DH) ......................................................

EXHAUST VALVES (TH) ......................................................

EXPANSION VALVE, AIR CONDITIONER ..........................

EXTENSION, DIP AND POUR ELEVATOR ........................

EXTENSION, ENGINE RAIL ................................................

EXTENSIONS, GRAIN TANK ..............................................

EYEBOLT, FEEDER HOUSE LOWER SHAFT-SH..............

EYEBOLT, FEEDER HOUSE TOP SHEETS-SH ................

EYEBOLT,FEEDER CONVEYOR IDLER SHAFT-SH ..........

EYEBOLTS, CYLINDER INTERMEDIATE DRIVE SUPPORT (DUAL-RANGE CYLINDER DRIVE) ..............

PAGE 20 - 97 20 - 1 20 - 74 20 - 44 20 - 46 20 - 72 20 - 108 20 - 56 20 - 58 20 - 62 20 - 64 20 - 68 20 - 28 140 - 3 170 - 3 170 - 3 170 - 3 20 - 94 20 - 90 20 - 88 20 - 8 20 - 12 20 - 18 20 - 22 20 - 26 20 - 3 20 - 94 20 - 54 20 - 54 170 - 32 20 - 2 40 - 43 90 - 59 90 - 59 20 - 87 20 - 86 20 - 87 20 - 86 30 - 22 30 - 23 20 - 48 20 - 50 90 - 59 120 - 157 20 - 94 130 - 11 110 - 93 110 - 67 110 - 96 120 - 32

F 6B24 6B22 7G2 1E17 5B25 2E6 2E8 7F24 7G5 7G2 1F16

FALSE BOTTOM,FEEDER HOUSE,LONG ..........................

FALSE BOTTOM,FEEDER HOUSE,REGULAR ..................

FAN PROTECTOR SHIELD ..................................................

FAN PULLEY (DH) ................................................................

FAN SHROUD ......................................................................

FAN, ALTERNATOR, 72 AMP ..............................................

FAN, ALTERNATOR, 90 AMP ..............................................

FAN, CLEANING ..................................................................

FAN, CLEANING, SPEED CONTROL..................................

FAN, HOUSING, CLEANING ................................................

FAN, RADIATOR ..................................................................

110 - 12 110 - 10 120 - 119 20 - 81 80 - 17 40 - 74 40 - 76 120 - 117 120 - 123 120 - 119 20 - 106

10-13 PN=13

1A15 6620 COMBINE ALPHABETICAL INDEX - CONTINUED GRID 6C13 6D16 6D17 6C21 6D18 6D18 6F2 6D5 6C20 6D5 6C13 6C12 6C12 6E23 6E23 6C24 6C24 6E21 6E22 4H24 4H18 5B10 6C3 6C3 6C2 6F6 6C4 6F17 6C4 6C5 6F17 6C4 6F17 6C1 6C3 6C1 6F4 6F4 6B20 6E3 6E5 6F14 6F14 6F3 6F3 8F20 6F14 8F22 8F21 8F23 6D25 8F25 8F24 8G3 8G1 8G2 8F19 8D19 8F25 8F25 8F24 8G3 8G1 8G2

10-14

PAGE FDR.HSE.,MID.BELT IDLER BRACES,L.H.,VAR. DR.-SH ..............................................................................

FDR.HSE.DRIVE TGHTNR.-FIXED DR.-REG. ....................

FDR.HSE.DRIVE TGHTNR-FIXED DR.(LONG) ..................

FDR.HSE.GEARBOX MOUNTING ASSEMBLY-SH ............

FDR.HSE.LOWER BELT TGHTNR-FIXED DR.-LONG ........

FDR.HSE.LOWER BELT TGHTNR-FIXED DR.-REG. ........

FDR.HSE.LOWER CENTER SHAFT-SIDEHILL ..................

FDR.HSE.LOWER SHAFT-FIXED DR.(REG-LONG) ..........

FDR.HSE.LOWER SHEAVE MOUNTINGS-VAR.DR. ..........

FDR.HSE.LOWER SHEAVE-FIXED DR.(REG-LONG) ........

FDR.HSE.MID.BELT IDLER,L.H.,VAR.DR.-SH ....................

FDR.HSE.MID.IDLER BRACES,L.H.(VAR.DR.)....................

FDR.HSE.MIDDLE BELT IDLER,L.H.(VAR.DR.) ..................

FDR.HSE.SHEAVE CONTROL LINKAGE-SH......................

FDR.HSE.SHEAVE CONTROL SUPPORT-SH ....................

FDR.HSE.UPPER COUNTERSHAFT SUPTS-VAR.DR. ......

FDR.HSE.UPPER COUNTERSHAFT-VARIABLE DR. ........

FDR.HSE.VAR.DR.MIDDLE BELT TGHTENER-SH ............

FDR.HSE.VAR.DR.MIDDLE BELT TGHTNR-SH..................

FDR.HSE.VARIABLE DRIVE HYD.CYLINDER - SH............

FDR.HSE.VARIABLE DRIVE HYDRAULIC HOSE ..............

FEED PLATE, FEEDER HOUSE..........................................

FEEDER CONV. DRIVE CHAIN (VARIABLE DR.) ..............

FEEDER CONV.IDLER BRKT. (VARIABLE DRIVE)............

FEEDER CONVEYOR CHAIN ..............................................

FEEDER CONVEYOR CHAIN-SH ........................................

FEEDER CONVEYOR DRIVE BRACKET (FIXED)..............

FEEDER CONVEYOR DRIVE BRACKET-SH......................

FEEDER CONVEYOR DRIVE CHAIN (FIXED)....................

FEEDER CONVEYOR DRIVE CHAIN GUIDES ..................

FEEDER CONVEYOR DRIVE CHAIN-SH............................

FEEDER CONVEYOR DRIVE IDLER (FIXED) ....................

FEEDER CONVEYOR DRIVE IDLER-SH ............................

FEEDER CONVEYOR DRUM ..............................................

FEEDER CONVEYOR IDLER (VARIABLE DRIVE) ............

FEEDER CONVEYOR IDLER SHAFT..................................

FEEDER CONVEYOR IDLER SHAFT-SH............................

FEEDER DRUM-SH ..............................................................

FEEDER HOUSE BOTTOM SHEETS ..................................

FEEDER HOUSE BOTTOM SHEETS - SIDEHILL ..............

FEEDER HOUSE BOTTOM SHEETS-SH ............................

FEEDER HOUSE BRACE (R.H.)-SH....................................

FEEDER HOUSE BRACKET (R.H.)-SH ..............................

FEEDER HOUSE CENTER PADDLES - SIDEHILL ............

FEEDER HOUSE CENTER SHAFTS-SIDEHILL..................

FEEDER HOUSE CHAINS (LONG)......................................

FEEDER HOUSE CHAINS (R.H.)-SH ..................................

FEEDER HOUSE CHAINS (SIDEHILL) ................................

FEEDER HOUSE CHAINS (VARIABLE DRIVE)..................

FEEDER HOUSE CHAINS-SH ............................................

FEEDER HOUSE DOORS - SIDEHILL ................................

FEEDER HOUSE DRIVE BELTS (LONG RICE) ................

FEEDER HOUSE DRIVE BELTS (LONG)............................

FEEDER HOUSE DRIVE BELTS (REG FIXED LESS REVERSER) ......................................................................

FEEDER HOUSE DRIVE BELTS (REG. FIXED) ................

FEEDER HOUSE DRIVE BELTS (SIDEHILL)......................

FEEDER HOUSE DRIVE BELTS (VARIABLE DR.) ............

FEEDER HOUSE DRIVE IDLER ..........................................

FEEDER HOUSE DRIVE IDLERS (LONG RICE) ................

FEEDER HOUSE DRIVE SHEAVES (LONG RICE) ............

FEEDER HOUSE DRIVE SHEAVES (LONG)......................

FEEDER HOUSE DRIVE SHEAVES (REG FIXED LESS REVERSER) ..........................................................

FEEDER HOUSE DRIVE SHEAVES (REG. FIXED) ..........

FEEDER HOUSE DRIVE SHEAVES (SIDEHILL) ................

110 - 26 110 - 54 110 - 55 110 - 34 110 - 56 110 - 56 110 - 94 110 - 42 110 - 33 110 - 42 110 - 26 110 - 25 110 - 25 110 - 90 110 - 90 110 - 37 110 - 37 110 - 88 110 - 89 70 - 112 70 - 106 80 - 1 110 - 16 110 - 16 110 - 15 110 - 98 110 - 17 110 - 110 110 - 17 110 - 18 110 - 110 110 - 17 110 - 110 110 - 14 110 - 16 110 - 14 110 - 96 110 - 96 110 - 8 110 - 69 110 - 71 110 - 107 110 - 107 110 - 95 110 - 95 170 - 8 110 - 107 170 - 10 170 - 9 170 - 11 110 - 65 170 - 13 170 - 12 170 - 16 170 - 14 170 - 15 170 - 7 140 - 21 170 - 13 170 - 13 170 - 12 170 - 16 170 - 14 170 - 15

GRID PAGE 8F19 FEEDER HOUSE DRIVE SHEAVES (VAR.DR.) ................ 170 - 7 8F25 FEEDER HOUSE DRIVE TIGHTENERS-LONG RICE ........ 170 - 13 5B10 FEEDER HOUSE FEED PLATE .......................................... 80 - 1 6E10 FEEDER HOUSE FRAME - SIDEHILL ................................ 110 - 76 6B24 FEEDER HOUSE FRAME, LONG ........................................ 110 - 12 6B22 FEEDER HOUSE FRAME, REGULAR ................................ 110 - 10 6B17 FEEDER HOUSE FRONT SHEETS .................................... 110 - 5 6D22 FEEDER HOUSE FRONT SHEETS - SIDEHILL ................ 110 - 61 6D24 FEEDER HOUSE FRONT SHEETS-SH .............................. 110 - 63 4H19 FEEDER HOUSE HYDRAULIC HOSE ................................ 70 - 107 8F24 FEEDER HOUSE IDLER (LONG) ........................................ 170 - 12 8G3 FEEDER HOUSE IDLERS (REG FIXED LESS REVERSER) ...................................................................... 170 - 16 8G1 FEEDER HOUSE IDLERS (REG. FIXED)............................ 170 - 14 8G2 FEEDER HOUSE IDLERS (SIDEHILL) ................................ 170 - 15 8F19 FEEDER HOUSE IDLERS (VARIABLE DRIVE) .................. 170 - 7 6C11 FEEDER HOUSE L.H. FRONT SHIELDS-SH...................... 110 - 24 6C11 FEEDER HOUSE L.H. REAR SHIELDS-SH ........................ 110 - 24 6F12 FEEDER HOUSE LEFT-HAND SHIELD-SH ........................ 110 - 104 6D14 FEEDER HOUSE LESS REVERSER UPPER SPROCKET ...................................................................... 110 - 52 6D14 FEEDER HOUSE LESS REVERSER UPPER SHAFT ........ 110 - 52 6E18 FEEDER HOUSE LOWER BELT TIGHTENER - SH .......... 110 - 85 6E20 FEEDER HOUSE LOWER BELT TIGHTENER-SH ............ 110 - 87 6F2 FEEDER HOUSE LOWER CENTER PADDLES - SH ........ 110 - 94 6E14 FEEDER HOUSE LOWER COUNTERSHAFT-SH .............. 110 - 80 6E15 FEEDER HOUSE LOWER COUNTERSHAFT-SH .............. 110 - 81 6D8 FEEDER HOUSE LOWER MOUNTINGS ............................ 110 - 45 6E25 FEEDER HOUSE LOWER PADDLES - SIDEHILL.............. 110 - 92 6F1 FEEDER HOUSE LOWER PADDLES-SH............................ 110 - 93 6D8 FEEDER HOUSE LOWER SHAFT ...................................... 110 - 45 6D6 FEEDER HOUSE LOWER SHAFT (REG FIXED LESS REVERSER) ...................................................................... 110 - 43 6E11 FEEDER HOUSE LOWER SHAFT - SIDEHILL .................. 110 - 77 2C17 FEEDER HOUSE LOWER SHAFT SPEED SENSOR ........ 40 - 34 2C18 FEEDER HOUSE LOWER SHAFT SPEED SENSOR-SH .. 40 - 35 2C19 FEEDER HOUSE LOWER SHAFT SPEED SENSOR-SH .. 40 - 36 6C20 FEEDER HOUSE LOWER SHAFT(VARIABLE DRIVE) ...... 110 - 33 6E13 FEEDER HOUSE LOWER SHAFT-SH ................................ 110 - 79 6E25 FEEDER HOUSE LOWER SHAFT-SH ................................ 110 - 92 6F1 FEEDER HOUSE LOWER SHAFT-SH ................................ 110 - 93 6D8 FEEDER HOUSE LOWER SHEAVE .................................... 110 - 45 6D6 FEEDER HOUSE LOWER SHEAVE (REG FIXED LESS REVERSER) .......................................................... 110 - 43 6E13 FEEDER HOUSE LOWER SHEAVE-SH.............................. 110 - 79 6C20 FEEDER HOUSE LOWER SHEAVE-VARIABLE DRIVE .... 110 - 33 6E14 FEEDER HOUSE LOWER SHEAVES-SH............................ 110 - 80 6E15 FEEDER HOUSE LOWER SHEAVES-SH............................ 110 - 81 6F1 FEEDER HOUSE LOWER SPROCKET-SH ........................ 110 - 93 6E25 FEEDER HOUSE LOWER SPROCKET-SIDEHILL.............. 110 - 92 6C14 FEEDER HOUSE MIDDLE BELT BRACE............................ 110 - 27 6C14 FEEDER HOUSE MIDDLE BELT IDLERS .......................... 110 - 27 6F9 FEEDER HOUSE R.H. SHIELD - SIDEHILL........................ 110 - 101 6E10 FEEDER HOUSE REAR TOP SHEETS - SIDEHILL .......... 110 - 76 6C16 FEEDER HOUSE REVERSER GEAR BOX ........................ 110 - 29 6F10 FEEDER HOUSE RIGHT-HAND SHIELD-SH ...................... 110 - 102 6F14 FEEDER HOUSE SHAFT (R.H.)-SH .................................... 110 - 107 6C9 FEEDER HOUSE SHIELD, L.H. (LONG) ............................ 110 - 22 6C8 FEEDER HOUSE SHIELD,L.H. (REGULAR FIXED)............ 110 - 21 6C6 FEEDER HOUSE SHIELD,R.H.(VARIABLE DRIVE)............ 110 - 19 6C10 FEEDER HOUSE SHIELDS (L.H.) ...................................... 110 - 23 6E3 FEEDER HOUSE SIDE SHEETS - SIDEHILL .................... 110 - 69 6E7 FEEDER HOUSE SIDE SHEETS AND FRAME-SH ............ 110 - 73 6E9 FEEDER HOUSE SIDE SHEETS AND FRAME-SH ............ 110 - 75 6B24 FEEDER HOUSE SIDE SHEETS, LONG ............................ 110 - 12 6B22 FEEDER HOUSE SIDE SHEETS,REGULAR ...................... 110 - 10 2C12 FEEDER HOUSE SPEED MONITORING HARNESS.......... 40 - 29 6620 COMBINE PC1666

(18-APR-00) PN=14

1A16 6620 COMBINE ALPHABETICAL INDEX - CONTINUED GRID 6F13 8F20 6F14 8F22 8F21 8F23 8F24 6F14 8G3 8G1 6F13 8G2 8F19 6B19 6D25 6B19 6E2 6E16 6F7 6D3 6D9 6D11 6D12 6D2 6F8 6F7 6D11 6D9 6E16 6F8 6D3 6D12 6E24 4H21 2C15 2C16 6C10 6C7 3C3 3C3 3C2 3C4 3C1 3C1 2C14 5D20 5D20 1E8 1F24 1H12 1G17 1G1 1H10 1H11 1H15 4D15 3I4 3C15 3C17 3C21 3C16 3C20

FEEDER HOUSE SPROCKET (RH) - SIDEHILL ................

FEEDER HOUSE SPROCKETS (LONG) ............................

FEEDER HOUSE SPROCKETS (R.H.)-SH..........................

FEEDER HOUSE SPROCKETS (SIDEHILL) ......................

FEEDER HOUSE SPROCKETS (VARIABLE DRIVE) ........

FEEDER HOUSE SPROCKETS-SH ....................................

FEEDER HOUSE TIGHTENERS (LONG) ............................

FEEDER HOUSE TIGHTENERS (R.H.)-SH ........................

FEEDER HOUSE TIGHTENERS (REG FIXED LESS REFERSER) ......................................................................

FEEDER HOUSE TIGHTENERS (REG. FIXED) ................

FEEDER HOUSE TIGHTENERS (RH) - SIDEHILL ............

FEEDER HOUSE TIGHTENERS (SIDEHILL) ......................

FEEDER HOUSE TIGHTENERS (VAR. DR.) ......................

FEEDER HOUSE TOP DOOR LEVER ................................

FEEDER HOUSE TOP SHEET - SIDEHILL ........................

FEEDER HOUSE TOP SHEETS ..........................................

FEEDER HOUSE TOP SHEETS-SH....................................

FEEDER HOUSE UPPER COUNTERSHAFT-SH................

FEEDER HOUSE UPPER PADDLES - SIDEHILL ..............

FEEDER HOUSE UPPER SHAFT........................................

FEEDER HOUSE UPPER SHAFT (FIXED DRIVE) ............

FEEDER HOUSE UPPER SHAFT (LONG RICE)................

FEEDER HOUSE UPPER SHAFT (WITH REVERSER)......

FEEDER HOUSE UPPER SHAFT AND SPROCKETS ......

FEEDER HOUSE UPPER SHAFT-SH ................................

FEEDER HOUSE UPPER SHAFT-SIDEHILL ......................

FEEDER HOUSE UPPER SHEAVE (LONG RICE) ............

FEEDER HOUSE UPPER SHEAVES (FIXED DRIVE)........

FEEDER HOUSE UPPER SHEAVES-SH ............................

FEEDER HOUSE UPPER SPROCKET-SH ........................

FEEDER HOUSE UPPER SPROCKETS ............................

FEEDER HOUSE UPPER SPROCKETS (WITH REVER SER) ..................................................................................

FEEDER HOUSE VAR.DR.SHEAVE CONTROL-SH ..........

FEEDER HOUSE VARIABLE DRIVE HYD.HOSES-SH ......

FEEDER HSE.LOWER SHAFT SPD.SENSOR-REG...........

FEEDER HSE.LOWER SHAFT SPEED SENSOR-LONG ..

FEEDER HSE.SHIELDS-L.H.-FIXED DR.LG.RICE ..............

FEEDER HSE.SHIELDS,L.H. (VARIABLE DRIVE) ..............

FENDERS (DUAL-RANGE CYLINDER DRIVE) (HEAVY-DUTY FINAL DRIVE) ........................................

FENDERS (DUAL-RANGE CYLINDER DRIVE) (REGULAR FINAL DRIVE) ..............................................

FENDERS (EXTRA HEAVY-DUTY FINAL DRIVE)..............

FENDERS (EXTRA HEAVY-DUTY FINAL DRIVE) (DUAL-RANGE CYLINDER DRIVE) ................................

FENDERS (HEAVY-DUTY FINAL DRIVE) ..........................

FENDERS (REGULAR FINAL DRIVE) ................................

FIELD LIGHTS ......................................................................

FILTER AND HOUSING, CAB AIR ......................................

FILTER, CAB AIR..................................................................

FILTER, ENGINE OIL (DH) ..................................................

FILTER, FUEL ......................................................................

FILTER, FUEL ......................................................................

FILTER, FUEL (DH) ..............................................................

FILTER, FUEL (EXPORT) ....................................................

FILTER, FUEL (TH 01)..........................................................

FILTER, FUEL (TH 05)..........................................................

FILTER, FUEL (TH 05)..........................................................

FILTER, HYDRAULIC RESERVOIR ....................................

FILTER, OIL RETURN LINES ..............................................

FINAL DRIVE ........................................................................

FINAL DRIVE AXLE ..............................................................

FINAL DRIVE AXLE (SH)......................................................

FINAL DRIVE BEARING CAP ..............................................

FINAL DRIVE BEARING CAP (SH)......................................

6620 COMBINE PC1666

(18-APR-00)

PAGE 110 - 105 170 - 8 110 - 107 170 - 10 170 - 9 170 - 11 170 - 12 110 - 107 170 - 16 170 - 14 110 - 105 170 - 15 170 - 7 110 - 7 110 - 65 110 - 7 110 - 67 110 - 82 110 - 99 110 - 40 110 - 47 110 - 49 110 - 50 110 - 39 110 - 100 110 - 99 110 - 49 110 - 47 110 - 82 110 - 100 110 - 40

GRID 3C17 3C18 3C21 3C22 3C23 3C17 3C21 3C16 3C20 3C18 3C22 3C23 3C18 3C22 3C23 2C1 7E12 7E11 5B25 3G24 3G24 3G24 7D4 6E24 6E15 6E20 3G1 6D18 6D18 6D5 6D6 6D6

110 - 50 110 - 91 70 - 109 40 - 32 40 - 33 110 - 23 110 - 20 50 - 14 50 - 14 50 - 13 50 - 15 50 - 12 50 - 12 40 - 31 90 - 37 90 - 37 20 - 72 30 - 5 30 - 48 30 - 25 30 - 7 30 - 46 30 - 47 30 - 52 70 - 2 50 - 181 50 - 27 50 - 29 50 - 33 50 - 28 50 - 32

6D17 6D16 6D5 6D9 6D9 2C12 1F8 8B20 5C21 5C23 5C21 4F6 4H15 3H4 3I2 8E10 8E11 8E10 8E11 1C19 3C5 3H5 2D3 5C3 5B14 6E7 7F17 5B25 3G11 6E10 6E9 6B24 6B22

FINAL DRIVE BEARINGS ....................................................

FINAL DRIVE BEARINGS ....................................................

FINAL DRIVE BEARINGS (SH) ............................................

FINAL DRIVE BEARINGS (SH) ............................................

FINAL DRIVE BEARINGS (SH) ............................................

FINAL DRIVE GEAR ............................................................

FINAL DRIVE GEAR (SH) ....................................................

FINAL DRIVE HOUSING ......................................................

FINAL DRIVE HOUSING (SH)..............................................

FINAL DRIVE PINION ..........................................................

FINAL DRIVE PINION (SH) ..................................................

FINAL DRIVE PIVOT (SH)....................................................

FINAL DRIVE SHAFT............................................................

FINAL DRIVE SHAFT (SH) ..................................................

FINAL DRIVE SHAFT (SH) ..................................................

FINGERS, TRASH (HARVESTRAK) ....................................

FINS AND PLATE, STRAW CHOPPER ..............................

FINS, PLATE, STRAW CHOPPER ......................................

FIREWALL ............................................................................

FIRST PLANET CARRIER (FOUR-WHEEL DR.) ................

FIRST PLANET COVER (FOUR-WHEEL DR.) ....................

FIRST PLANET PINION (FOUR-WHEEL DR.) ....................

FITTING,CYL.SHAFT BRG.HSG.LUBE BANK-RH ..............

FITTING,F.H.VAR.DRIVE SHEAVE CONTROL-SH ............

FITTING,FEEDER HOUSE LOWER SHEAVES-SH ............

FITTING,GREASE,FDR.HSE.LOWER BELT TGHTNR........

FITTINGS AND HOSES, HYDROSTATIC DRIVE................

FIXED DR.-FDR.HSE.LOWER BELT TGHTNR.-REG ........

FIXED DR.-FDR.HSE.LOWER BELT TGHTNR-LONG ........

FIXED DR.-FDR.HSE.LOWER SHAFT-REG-LONG ............

FIXED DRIVE LESS REVERSER, FEEDER HOUSE, LOWER SHAFT ................................................................

FIXED DRIVE LESS REVERSER, FEEDER HOUSE, LOWER SHEAVE..............................................................

FIXED DRIVE-FDR.HSE.DRIVE TGHTNR.(LONG)..............

FIXED DRIVE-FDR.HSE.DRIVE TGHTNR.(REG.) ..............

FIXED DRIVE-FDR.HSE.LOWER SHV.(REG-LONG) ..........

FIXED DRIVE-FEEDER HOUSE UPPER SHAFT................

FIXED DRIVE-FEEDER HOUSE UPPER SHEAVES ..........

FLASHER, SIGNAL ..............................................................

FLAT ROTARY SCREEN ......................................................

FLIP-UPS, GRAIN TANK ......................................................

FLOORBOARD, OPERATOR’S PLATFORM........................

FLOORMAT, L.H. REAR ......................................................

FLOORMAT, OPERATOR’S PLATFORM ............................

FLOW CONTROL PLUG ......................................................

FLOW CONTROL VALVE, HYDROSTATIC DR. REEL ......

FLOW CONTROL VALVES (FOUR-WHEEL DRIVE) ..........

FLOW CONTROL VALVES (FOUR-WHEEL DRIVE) ..........

FLOW DIVIDER MOUNTING - SIDEHILL ............................

FLOW DIVIDER MOUNTING - SIDEHILL ............................

FLOW DIVIDER VALVE - SIDEHILL ....................................

FLOW DIVIDER VALVE - SIDEHILL ....................................

FLYWHEEL ............................................................................

FORKS, SHIFTER, DIFFERENTIAL ....................................

FOUR-WHEEL DRIVE (SUNDSTRAND) ..............................

FOUR-WHEEL DRIVE SWITCH ..........................................

FRAME AND DOOR,ENGINE COMPT.MIDDLE ..................

FRAME AND SEPARATOR L.H. SIDE SHEETS ................

FRAME AND SIDE SHEETS, FEEDER HOUSE-SH ..........

FRAME, CHAFFER ..............................................................

FRAME, CORNER ................................................................

FRAME, CRAWLER, R.H. AND L.H.....................................

FRAME, FEEDER HOUSE - SIDEHILL................................

FRAME, FEEDER HOUSE-SH ............................................

FRAME, FEEDER HOUSE, LONG ......................................

FRAME, FEEDER HOUSE, REGULAR ................................

PAGE 50 - 29 50 - 30 50 - 33 50 - 34 50 - 35 50 - 29 50 - 33 50 - 28 50 - 32 50 - 30 50 - 34 50 - 35 50 - 30 50 - 34 50 - 35 40 - 18 120 - 78 120 - 77 80 - 17 50 - 144 50 - 144 50 - 144 120 - 43 110 - 91 110 - 81 110 - 87 50 - 118 110 - 56 110 - 56 110 - 42 110 - 43 110 - 43 110 - 55 110 - 54 110 - 42 110 - 47 110 - 47 40 - 29 20 - 98 130 - 11 90 - 11 90 - 13 90 - 11 70 - 42 70 - 103 50 - 149 50 - 179 150 - 16 150 - 17 150 - 16 150 - 17 20 - 32 50 - 16 50 - 151 40 - 45 80 - 20 80 - 5 110 - 73 120 - 109 80 - 17 50 - 129 110 - 76 110 - 75 110 - 12 110 - 10

10-15 PN=15

1A17 6620 COMBINE ALPHABETICAL INDEX - CONTINUED GRID 5C21 4C20 5B11 7F15 8C5 3E15 3E14 3E13 8C2 5C5 1C25 6D22 5B10 1H14 1F24 1H12 1G17 1G1 1H10 1H11 1H15 1H13 2D5 2C6 1G24 1I1 1G18 1H17 1H19 1G18 1H17 1G20 1H17 1H21 1G21 1H24 1H22 1F24 1F25 1H15 1H19 1F24 1H1 1G4 1G2 1G3 1F22 1F22 1G23 1I4 1H17 1H21 1I3 8E24 8E17

FRAME, OPERATOR’S PLATFORM ....................................

FRAME, REAR AXLE (FOUR-WHEEL DR.) ........................

FRAME, SEPARATOR RIGHT-HAND ..................................

FRAME, SIEVE......................................................................

FRONT AND REAR GRAIN TANK AUGER COVERS, ADJUSTABLE....................................................................

FRONT COVER, HYDRO. DRIVE PUMP (EATON) ............

FRONT COVER, HYDROSTATIC DRIVE (SUNDSTRAND)................................................................

FRONT COVER, HYDROSTATIC DRIVE PUMP (SUNDSTRAND)................................................................

FRONT CROSS AUGER, GRAIN TANK..............................

FRONT ENGINE COMPARTMENT PANEL ........................

FRONT OIL SEAL ................................................................

FRONT SHEETS, FEEDER HOUSE - SIDEHILL ................

FRONT SHEETS, SEPARATOR ..........................................

FUEL CHECK VALVE (TH) ..................................................

FUEL FILTER ........................................................................

FUEL FILTER ........................................................................

FUEL FILTER (DH) ..............................................................

FUEL FILTER (EXPORT) ......................................................

FUEL FILTER (TH 01) ..........................................................

FUEL FILTER (TH 05) ..........................................................

FUEL FILTER (TH 05) ..........................................................

FUEL FILTER KIT ................................................................

FUEL GAUGE........................................................................

FUEL GAUGE SENDING UNIT ............................................

FUEL INJECTION NOZZLE (DH) ........................................

FUEL INJECTION NOZZLE (TH)..........................................

FUEL INJECTION NOZZLES (DH) ......................................

FUEL INJECTION NOZZLES (TH 01)..................................

FUEL INJECTION NOZZLES (TH 05)..................................

FUEL INJECTION PIPES (DH) ............................................

FUEL INJECTION PIPES (TH 01)........................................

FUEL INJECTION PUMP (DH) ............................................

FUEL INJECTION PUMP (TH 01) ........................................

FUEL INJECTION PUMP (TH 05) ........................................

FUEL INJECTION PUMP FITTINGS AND LINKAGE (DH) ..................................................................................

FUEL INJECTION PUMP GOVERNOR LEVERS AND CONTROLS (TH) ..............................................................

FUEL INJECTION PUMP HOUSING CONNECTORS (TH)....................................................................................

FUEL LINES ..........................................................................

FUEL LINES (EXPORT)........................................................

FUEL PIPES (TH 05) ............................................................

FUEL PIPES (TH 05) ............................................................

FUEL PUMP ..........................................................................

FUEL PUMP (DH)..................................................................

FUEL SHUT-OFF BRACKET (TH)........................................

FUEL SHUT-OFF CONTROL................................................

FUEL SHUT-OFF CONTROL................................................

FUEL TANK ..........................................................................

FUEL TANK SUPPORT ........................................................

FUEL TRANSFER PUMP (DH) ............................................

FUEL TRANSFER PUMP (ROBERT BOSCH) ....................

FUEL TRANSFER PUMP (TH 01)........................................

FUEL TRANSFER PUMP (TH 05)........................................

FUEL TRANSFER PUMP (TH) ............................................

FULL FLOW PLUG, AUTOMATIC HDR.HGT.CTL...............

FUSE AND SWITCHES, SIDEHILL LEVELING ..................

PAGE 90 - 11 60 - 37 80 - 2 120 - 107 130 - 20 50 - 81 50 - 80 50 - 79 130 - 17 80 - 22 20 - 38 110 - 61 80 - 1 30 - 50 30 - 5 30 - 48 30 - 25 30 - 7 30 - 46 30 - 47 30 - 52 30 - 49 40 - 47 40 - 23 30 - 34 30 - 64 30 - 26 30 - 54 30 - 56 30 - 26 30 - 54 30 - 28 30 - 54 30 - 59 30 - 30 30 - 62 30 - 60 30 - 5 30 - 6 30 - 52 30 - 56 30 - 5 30 - 36 30 - 10 30 - 8 30 - 9 30 - 3 30 - 3 30 - 32 30 - 67 30 - 54 30 - 59 30 - 66 160 - 7 150 - 24

G 1F1 1F1

10-16

GASKET KIT, CYLINDER HEAD (TH) ................................

GASKET KIT, ENGINE REBUILD (TH) ................................

20 - 90 20 - 90

GRID 1E23 1E23 1D9 1D11 3C6 1E19 1E20 1E13 1E14 1E16 1E11 1D13 1C25 3C6 1E17 3F13 1E21 1E22 2C3 2D5 2D5 2D5 2C7 2D5 6C16 7C24 7C20 7G23 8C13 8C21 8C21 1D4 1D2 1D3 3C17 3C21 1C19 6C21 3C11 3C13 7C22 3C8 3C10 3B21 3B16 3B17 3B19 4D15 1H24 2C1 8B12 8B14 8C11 8B20 8B20 8B20 8C2 8C4 2B17 8C3 8B16 8B21 8C8 8C9

GASKET SET, CYLINDER HEAD (DH)................................

GASKET SET, ENGINE REBUILD (DH) ..............................

GASKET, CYLINDER HEAD (DH)........................................

GASKET, CYLINDER HEAD (TH) ........................................

GASKET, DIFFERENTIAL ....................................................

GASKET, INTAKE MANIFOLD (DH) ....................................

GASKET, INTAKE MANIFOLD (TH) ....................................

GASKET, OIL PAN................................................................

GASKET, OIL PAN................................................................

GASKET, OIL PAN................................................................

GASKET, OIL PAN (DH) ......................................................

GASKET, ROCKER ARM COVER (DH) ..............................

GASKET, TIMING GEAR COVER ........................................

GASKET, TRANSMISSION ..................................................

GASKET, WATER PUMP (DH) ............................................

GASKET,HYDRO.DR.DISPLACEMENT CTL.VALVE (SUNDSTRAND)................................................................

GASKETS, EXHAUST MANIFOLD (DH) ..............................

GASKETS, EXHAUST MANIFOLD (TH) ..............................

GAUGE, ACCUMULATOR PRESSURE ..............................

GAUGE, FUEL ......................................................................

GAUGE, OIL PRESSURE ....................................................

GAUGE, WATER TEMPERATURE ......................................

GAUGE, WATER TEMPERATURE, SENDING UNIT ..........

GAUGES, INSTRUMENT PANEL ........................................

GEAR BOX, REVERSER ......................................................

GEAR CASE SHIELD, DUAL-RANGE CYLINDER DRIVE ................................................................................

GEAR CASE, CYLINDER, DUAL-RANGE............................

GEAR CASE, LOADING AUGER ........................................

GEAR CASE, LOWER, VERTICAL AUGER ........................

GEAR CASE,DRIVE,HORIZONTAL UNLDG.AUGER ..........

GEAR CASE,HORIZONTAL UNLDG.AUGER DRIVE..........

GEAR COVER, TACHOMETER DRIVE ..............................

GEAR, CAMSHAFT (DH) ......................................................

GEAR, CAMSHAFT (TH) ......................................................

GEAR, FINAL DRIVE ............................................................

GEAR, FINAL DRIVE (SH) ..................................................

GEAR, STARTER ..................................................................

GEARBOX MOUNTING ASSEMBLY, FDR.HSE.-SH ..........

GEARS, DIFFERENTIAL ......................................................

GEARS, DIFFERENTIAL ......................................................

GEARS, PINION, DUAL-RANGE CYLINDER DRIVE ..........

GEARS, TRANSMISSION ....................................................

GEARS, TRANSMISSION ....................................................

GEARSHIFT CABLES AND MOUNTINGS ..........................

GEARSHIFT LEVER AND CAM (POSI-TORQ) ..................

GEARSHIFT LEVER ASSEMBLY-HYDROSTATIC DR. ......

GEARSHIFT RANGE SHIFTER AND SUPPORT ................

GLASS, LEVEL SIGHT, HYDRAULIC RESERVOIR............

GOVERNOR LEVERS AND CONTROLS, FUEL INJECTION PUMP (TH)....................................................

GRAIN LOSS CONSOLE, HARVESTRAK ..........................

GRAIN TANK ........................................................................

GRAIN TANK ........................................................................

GRAIN TANK CROSS AUGER DRIVE TIGHTENERS........

GRAIN TANK DOOR ............................................................

GRAIN TANK EXTENSIONS ................................................

GRAIN TANK FLIP-UPS ......................................................

GRAIN TANK FRONT CROSS AUGER ..............................

GRAIN TANK INNER UNLOADING AUGER COVERS ......

GRAIN TANK LIGHT ............................................................

GRAIN TANK REAR CROSS AUGER ................................

GRAIN TANK SKIRTS ..........................................................

GRAIN TANK SUMP BAFFLE ..............................................

GRAIN TANK SUMP HOUSING AND SHIELD....................

GRAIN TANK SUMP HOUSING AND SHIELD....................

6620 COMBINE PC1666

PAGE 20 - 88 20 - 88 20 - 48 20 - 50 50 - 17 20 - 83 20 - 84 20 - 77 20 - 78 20 - 80 20 - 75 20 - 52 20 - 38 50 - 17 20 - 81 50 - 104 20 - 86 20 - 87 40 - 20 40 - 47 40 - 47 40 - 47 40 - 24 40 - 47 110 - 29 120 - 39 120 - 34 120 - 141 130 - 29 130 - 37 130 - 37 20 - 42 20 - 40 20 - 41 50 - 29 50 - 33 20 - 32 110 - 34 50 - 22 50 - 24 120 - 36 50 - 19 50 - 21 50 - 7 50 - 2 50 - 3 50 - 5 70 - 2 30 - 62 40 - 18 130 - 3 130 - 5 130 - 27 130 - 11 130 - 11 130 - 11 130 - 17 130 - 19 40 - 7 130 - 18 130 - 7 130 - 12 130 - 23 130 - 24

(18-APR-00) PN=16

1A18 6620 COMBINE ALPHABETICAL INDEX - CONTINUED GRID 8C15 8C6 7B21 2D12 2E4 2D12 5E16 3D14 3D7 3D11 7E23 6C5

GRAIN TANK VERTICAL AUGER AND HOUSING ............

GRASS SEED UNLDG.AUG.COVERS ATTACHMENT ......

GRATE, BEATER ..................................................................

GRILLE, PUSH BUTTON ......................................................

GRILLE, RADIO ....................................................................

GRILLE, TAPE PLAYER ......................................................

GROMMET, HEATER HOSES..............................................

GROUND DRIVE POSI-TORQ UPPER UNIT......................

GROUND DRIVE, POSI-TORQ, LOWER UNIT ..................

GROUND SPEED CONTROLS, POSI-TORQ......................

GUARD, STRAW SPREADER..............................................

GUIDES, FEEDER CONVEYOR DRIVE CHAIN..................

PAGE 130 - 31 130 - 21 120 - 9 40 - 55 40 - 71 40 - 55 90 - 60 50 - 53 50 - 44 50 - 49 120 - 89 110 - 18

H 5D14 7E15 7E7 7E8 7E20 7E15 5C13 5C17 5C15 5E9 8F3 5E2 8F8 8F3 2C12 2B25 2B22 2E20 2C6 8E16 2D10 2D7 2C7 2C21 2C12 2C12 2B14 2B14 2B14 8F2 2B25 2D5 2C1 2C1 2C1 1D9 1D11 1D9 1D11 6D19 6D20 2B19 2C23 8F3 8F5 6F19 6F18 6F20 6F19 6F20 4I2

HANDLE, CAB ......................................................................

HANDLE, STRAW CHOPPER CURTAIN ............................

HANDLE, STRAW CHOPPER HOUSING ............................

HANDLE, STRAW CHOPPER HOUSING ............................

HANDLE, STRAW CHOPPER KNIFE AND SUPPORT ......

HANDLE, STRAW CHOPPER SHIELDS ............................

HANDRAIL, OPERATOR’S PLATFORM ..............................

HANDRAIL, OPERATOR’S PLATFORM (EXPORT) ............

HANDRAILS, OPERATOR’S PLATFORM (TRACKS)..........

HARDWARE KIT, COMPRESSOR ......................................

HARNESS ADAPTER, DIAL-A-MATIC ................................

HARNESS, COMPRESSOR..................................................

HARNESS, DIAL-A-MATIC CONVERSION ..........................

HARNESS, ELECTRIC ..........................................................

HARNESS, FEEDER HOUSE SPEED MONITORING ........

HARNESS, HARVESTRAK ADAPTER ................................

HARNESS, LOW SHAFT SPEED MONITOR’S ..................

HARNESS, MAGNETIC PICK-UP (DH)................................

HARNESS, SEPARATOR, RIGHT-HAND ............................

HARNESS, SIDEHILL LEVELING ........................................

HARNESS, WIRING ..............................................................

HARNESS, WIRING, CAB ROOF ........................................

HARNESS, WIRING, ENGINE COMPARTMENT ................

HARNESS, WIRING, INSTRUMENT PANEL (AHHC) ........

HARNESS, WIRING, LEFT-HAND LIGHTS ........................

HARNESS, WIRING, OPERATOR’S PLATFORM................

HARNESS, WIRING, REAR HOOD......................................

HARNESS, WIRING, SEPARATOR (L.H.) ..........................

HARNESS, WIRING, UNLOADING AUGER ........................

HARNESS,WIRING,AUTO.HDR.HEIGHT CONTROL ..........

HARVESTRAK ADAPTER HARNESS..................................

HARVESTRAK CIRCUIT BREAKER ....................................

HARVESTRAK COMBINE MONITOR ..................................

HARVESTRAK COMBINE MONITOR CONTROL PANEL ..

HARVESTRAK COMBINE MONITOR PREAMPLIFIER ......

HEAD BOLTS (DH) ..............................................................

HEAD BOLTS (TH)................................................................

HEAD, CYLINDER (DH)........................................................

HEAD, CYLINDER (TH) ........................................................

HEADER DRIVE SHAFT - SIDEHILL ..................................

HEADER DRIVE SHAFT-SIDEHILL......................................

HEADER ELECTROMAGNETIC CLUTCH ..........................

HEADER HEIGHT CONTROL, DIAL-A-MATIC ....................

HEADER HEIGHT CONTROL, DIAL-A-MATIC ....................

HEADER HGT.CTL.,DIAL-A-MATIC,AMPLIFIER..................

HEADER LEVELING CABLES (L.H.)-SH ............................

HEADER LEVELING CABLES-SIDEHILL ............................

HEADER LEVELING CABLES, L.H.-SH ..............................

HEADER LEVELING MOUNTING (L.H.)-SH ........................

HEADER LEVELING MOUNTING, L.H.-SH ........................

HEADER LIFT HYDRAULIC CYLINDER..............................

6620 COMBINE PC1666

(18-APR-00)

90 - 31 120 - 81 120 - 73 120 - 74 120 - 86 120 - 81 90 - 3 90 - 7 90 - 5 90 - 53 160 - 12 90 - 44 160 - 18 160 - 12 40 - 29 40 - 17 40 - 13 40 - 89 40 - 23 150 - 23 40 - 53 40 - 49 40 - 24 40 - 38 40 - 29 40 - 29 40 - 3 40 - 3 40 - 3 160 - 11 40 - 17 40 - 47 40 - 18 40 - 18 40 - 18 20 - 48 20 - 50 20 - 48 20 - 50 110 - 57 110 - 59 40 - 9 40 - 40 160 - 12 160 - 14 110 - 112 110 - 111 110 - 113 110 - 112 110 - 113 70 - 116

GRID 4I4 4I5 4I3 4I1 5D17 5E16 5E15 5E16 5E17 1F6 1F7 5E14 5E3 3F16 6E2 7H15 5B16 5B18 2B14 8C21 8C23 8C17 8B18 2C12 2D2 4H12 4H18 1E13 1E14 7D4 4H10 3G1 3H6 4F8 3I4 3H5 4C11 4C6 1F14 4C9 4H7 5E16 5E17 3H4 3I2 8E14 4F11 4F13 3H8 8E13 3G4 3G6 4H9 4C7 4H21 4G5 4G7 2D2 6B20 6B17 5D20 8C8 8C9

HEADER LIFT HYDRAULIC CYLINDER KIT ......................

HEADER LIFT HYDRAULIC CYLINDER KIT-SH ................

HEADER LIFT HYDRAULIC CYLINDER-SH........................

HEADER LIFT OIL LINES ....................................................

HEADLINER, CAB ROOF ....................................................

HEATER CONTROL VALVE ................................................

HEATER CORE ....................................................................

HEATER HOSES ..................................................................

HEATER HOSES ..................................................................

HEATER, ENGINE COOLANT..............................................

HEATER, ENGINE COOLANT..............................................

HI PRESSURE SWITCH LIGHT ASSEMBLY ......................

HI PRESSURE SWITCH, AIR CONDITIONER ....................

HIGH PRESSURE RELIEF VALVE (EATON) ......................

HINGE,FEEDER HOUSE TOP SHEETS-SH........................

HOOD, DIP AND POUR ELEVATOR TOP ..........................

HOOD, REAR ........................................................................

HOOD, REAR ........................................................................

HOOD, REAR, WIRING HARNESS......................................

HORIZONTAL UNLDG.AUGER DRIVE GEAR CASE ........

HORIZONTAL UNLOADING AUGER ..................................

HORIZONTAL UNLOADING AUGER SWIVEL ....................

HORIZONTAL UNLOADING AUGER SWIVEL SHROUD ..

HORN ....................................................................................

HORN SWITCH ....................................................................

HOSE AND COUPLER CONVERSION ................................

HOSE, HYDRAULIC, VARIABLE DRIVE FDR.HSE.............

HOSE, OIL PAN DRAIN........................................................

HOSE, OIL PAN DRAIN........................................................

HOSE,CYL.SHAFT BRG.HSG.LUBE BANK (R.H.)..............

HOSES AND COUPLER FOR COMBINES ........................

HOSES AND FITTINGS, HYDROSTATIC DRIVE................

HOSES AND LINES, HYD. (FOUR-WHEEL DR.) (EATON) ............................................................................

HOSES AND LINES, HYDRAULIC OIL................................

HOSES AND LINES, HYDRAULIC OIL RETURN ..............

HOSES AND LINES,HYD. (FOUR-WHEEL DRIVE) (SUNDSTRAND)................................................................

HOSES AND LINES,STEERING OIL (FOUR-WHEEL DRIVE) ....................................................

HOSES AND OIL LINES-FRONT, STEERING ....................

HOSES AND RADIATOR ......................................................

HOSES-REAR, STEERING OIL LINES................................

HOSES, DRIVE REEL HYDRAULIC ....................................

HOSES, HEATER..................................................................

HOSES, HEATER..................................................................

HOSES, HYDRAULIC (FOUR-WHEEL DRIVE) ..................

HOSES, HYDRAULIC (FOUR-WHEEL DRIVE) ..................

HOSES, HYDRAULIC LOWER - SIDEHILL ........................

HOSES, HYDRAULIC OIL LINES AND................................

HOSES, HYDRAULIC OIL LINES AND................................

HOSES, HYDRAULIC OIL RETURN LINES AND ..............

HOSES, HYDRAULIC UPPER - SIDEHILL..........................

HOSES, LOWER OIL, HYDROSTATIC DRIVE (SUNDSTRAND)................................................................

HOSES, LOWER, HYDRO. DR. ..........................................

HOSES, REEL LIFT, SIDEHILL............................................

HOSES,-REAR, STEERING OIL LINE ................................

HOSES,HYD.,FDR.HSE. VARIABLE DRIVE-SH..................

HOSES,UNLOADING AUGER SWING HYDRAULIC ..........

HOSES,UNLOADING AUGER SWING HYDRAULIC ..........

HOUR METER ......................................................................

HOUSE, FEEDER, BOTTOM SHEETS ................................

HOUSE, FEEDER, FRONT SHEETS ..................................

HOUSING AND FILTER, CAB AIR ......................................

HOUSING AND SHIELD, GRAIN TANK SUMP ..................

HOUSING AND SHIELD, GRAIN TANK SUMP ..................

PAGE 70 - 118 70 - 119 70 - 117 70 - 115 90 - 34 90 - 60 90 - 59 90 - 60 90 - 61 20 - 96 20 - 97 90 - 58 90 - 45 50 - 107 110 - 67 120 - 159 80 - 7 80 - 9 40 - 3 130 - 37 130 - 39 130 - 33 130 - 9 40 - 29 40 - 43 70 - 100 70 - 106 20 - 77 20 - 78 120 - 43 70 - 98 50 - 118 50 - 153 70 - 44 50 - 181 50 - 151 60 - 27 60 - 21 20 - 104 60 - 25 70 - 94 90 - 60 90 - 61 50 - 149 50 - 179 150 - 21 70 - 47 70 - 49 50 - 155 150 - 19 50 - 122 50 - 124 70 - 97 60 - 23 70 - 109 70 - 66 70 - 68 40 - 43 110 - 8 110 - 5 90 - 37 130 - 23 130 - 24

10-17 PN=17

1A19 6620 COMBINE ALPHABETICAL INDEX - CONTINUED GRID 8C15 HOUSING AND VERTICAL AUGER, GRAIN TANK............

3E20 HOUSING HYDRO. DRIVE PUMP (EATON) ......................

2E6 HOUSING, ALTERNATOR, 72 AMP ....................................

2E8 HOUSING, ALTERNATOR, 90 AMP ....................................

7H13 HOUSING, AUGER, DIP AND POUR ELEVATOR..............

7G11 HOUSING, CLEAN GRAIN ELEVATOR ..............................

7G12 HOUSING, CLEAN GRAIN ELEVATOR ..............................

7G7 HOUSING, CLEAN GRAIN LOWER AUGER ......................

7G9 HOUSING, CLEAN GRAIN LOWER AUGER ......................

7G2 HOUSING, CLEANING FAN ................................................

1D1 HOUSING, CRANKSHAFT OIL SEAL ..................................

3C5 HOUSING, DIFFERENTIAL ..................................................

3C13 HOUSING, DIFFERENTIAL GEARS AND SHAFTS ............

3D8 HOUSING, DRIVE WHEEL CLUTCH ..................................

8D3 HOUSING, ENGINE POWERSHAFT....................................

6D14 HOUSING, FEEDER HOUSE LESS REVERSER UPPER SHAFT ................................................................

6D3 HOUSING, FEEDER HOUSE UPPER SHAFT ....................

6D12 HOUSING, FEEDER HOUSE UPPER SHAFT (WITH REVERSER) ......................................................................

6F8 HOUSING, FEEDER HOUSE UPPER SHAFT-SH ..............

3C16 HOUSING, FINAL DRIVE......................................................

3C20 HOUSING, FINAL DRIVE (SH) ............................................

8C23 HOUSING, HORIZONTAL UNLOADING AUGER ................

3E18 HOUSING, HYDRO. DRIVE PUMP (SUNDSTRAND) ........

3E17 HOUSING, HYDROSTATIC DRIVE PUMP (SUNDSTRAND)................................................................

3G25 HOUSING, KNEE AND MOTOR (FOUR-WHEEL DR.) ......

7G21 HOUSING, LOADING AUGER..............................................

7H23 HOUSING, LOWER TAILINGS ............................................

7H4 HOUSING, LOWER, DIP AND POUR ELEVATOR ............

4D18 HOUSING, MAIN HYD. PUMP ............................................

4D19 HOUSING, MAIN HYDRAULIC PUMP ................................

3G23 HOUSING, PLANETARY (FOUR-WHEEL DRIVE) ..............

7B18 HOUSING, RASP-BAR CYLINDER (DUAL-RANGE CYLINDER DRIVE) ..........................................................

7F3 HOUSING, SHOE GRAIN SUPPLY AUGERS ....................

2E14 HOUSING, STARTER DRIVE (DH) ......................................

7E7 HOUSING, STRAW CHOPPER ............................................

7E8 HOUSING, STRAW CHOPPER ............................................

7H25 HOUSING, TAILINGS ELEVATOR ......................................

7I1 HOUSING, TAILINGS ELEVATOR ......................................

1G7 HOUSING, THROTTLE LINKAGE CONTROL ....................

1G7 HOUSING, THROTTLE LINKAGE CONTROL LEVER ........

3C5 HOUSING, TRANSMISSION ................................................

1H2 HOUSING, TURBOCHARGER (AIRESEARCH) ..................

1H4 HOUSING, TURBOCHARGER (AIRESEARCH) ..................

1H3 HOUSING, TURBOCHARGER CENTER(AIRESEARCH)....

1H5 HOUSING, TURBOCHARGER CENTER(AIRESEARCH)....

7I6 HOUSING, UPPER TAILINGS ..............................................

4D4 HOUSING, WHEEL MOTOR (FOUR-WHEEL DR.) ............

3G21 HOUSING,WHEEL HUB,AND MOTOR (FOUR-WHEEL DR.)....................................................................................

1H6 HOUSINGS, TURBOCHARGER (SCHWITZER) ..................

4D3 HOUSINGS,REAR AXLE SPINDLE-(HEAVY-DUTY) ..........

6E13 HUB, FEEDER HOUSE LOWER SHAFT-SH ......................

6E15 HUB,FEEDER HOUSE LOWER SHEAVES-SH ..................

3G21 HUB,MOTOR,AND HOUSING,WHEEL (FOUR-WHEEL DR.)....................................................................................

4E8 HYD. CONTROL VALVE POPPETS, MAIN-HYDRO...........

4E11 HYD. CONTROL VALVE POPPETS, MAIN-HYDRO...........

4E8 HYD. CONTROL VALVE SPRINGS, MAIN-HYDRO. ..........

4E11 HYD. CONTROL VALVE SPRINGS, MAIN-HYDRO. ..........

3H6 HYD. LINES AND HOSES (FOUR-WHEEL DR.) (EATON) ............................................................................

3H5 HYD. LINES AND HOSES (FOUR-WHEEL DRIVE) (SUNDSTRAND)................................................................

10-18

PAGE 130 - 31 50 - 86 40 - 74 40 - 76 120 - 157 120 - 129 120 - 130 120 - 125 120 - 127 120 - 119 20 - 39 50 - 16 50 - 24 50 - 45 140 - 3 110 - 52 110 - 40 110 - 50 110 - 100 50 - 28 50 - 32 130 - 39 50 - 84 50 - 83 50 - 145 120 - 139 120 - 167 120 - 147 70 - 5 70 - 6 50 - 143 120 - 6 120 - 95 40 - 82 120 - 73 120 - 74 120 - 169 120 - 170 30 - 13 30 - 13 50 - 16 30 - 37 30 - 39 30 - 38 30 - 40 120 - 176 60 - 45 50 - 141 30 - 41 60 - 44 110 - 79 110 - 81 50 - 141 70 - 19 70 - 22 70 - 19 70 - 22 50 - 153 50 - 151

GRID PAGE 4G5 HYD. OIL LINES,UNLOADING AUGER SWING.................. 70 - 66 4G7 HYD. OIL LINES,UNLOADING AUGER SWING.................. 70 - 68 4E20 HYD.CONTROL VALVE POPPETS,MAIN-POSI-TORQ ...... 70 - 31 4E22 HYD.CONTROL VALVE POPPETS,MAIN-POSI-TORQ ...... 70 - 33 4F1 HYD.CONTROL VALVE POPPETS,MAIN-POSI-TORQ ...... 70 - 37 4F2 HYD.CONTROL VALVE SPOOLS-MAIN-POSI-TORQ ........ 70 - 38 4E12 HYD.CONTROL VALVE SPOOLS,MAIN-HYDRO. .............. 70 - 23 4E10 HYD.CONTROL VALVE SPOOLS,MAIN-HYDRO.-SH ........ 70 - 21 4E21 HYD.CONTROL VALVE SPOOLS,MAIN-POSI-TORQ ........ 70 - 32 4E23 HYD.CONTROL VALVE SPOOLS,MAIN-POSI-TORQ ........ 70 - 34 4E25 HYD.CONTROL VALVE SPOOLS,MAIN-POSI-TORQ ........ 70 - 36 4E20 HYD.CONTROL VALVE SPRINGS,MAIN-POSI-TORQ ...... 70 - 31 4E22 HYD.CONTROL VALVE SPRINGS,MAIN-POSI-TORQ ...... 70 - 33 4E24 HYD.CONTROL VALVE SPRINGS,MAIN-POSI-TORQ ...... 70 - 35 4F1 HYD.CONTROL VALVE SPRINGS,MAIN-POSI-TORQ ...... 70 - 37 4E24 HYD.CONTROL VALVE,POPPETS,MAIN-POSI-TORQ ...... 70 - 35 4E12 HYD.CONTROL,MAIN,RELIEF VALVE-HYDRO................... 70 - 23 4E10 HYD.CONTROL,MAIN,RELIEF VALVE-HYDRO.-SH .......... 70 - 21 4E21 HYD.CONTROL,MAIN,RELIEF VALVE-POSI-TORQ .......... 70 - 32 4E23 HYD.CONTROL,MAIN,RELIEF VALVE-POSI-TORQ .......... 70 - 34 4E25 HYD.CONTROL,MAIN,RELIEF VALVE-POSI-TORQ .......... 70 - 36 4F2 HYD.CONTROL,MAIN,RELIEF VALVE-POSI-TORQ .......... 70 - 38 4H21 HYD.HOSES,VARIABLE DRIVE FEEDER HOUSE-SH ...... 70 - 109 4E14 HYDRAULIC CONTROL VALVE SPOOLS, MAIN .............. 70 - 25 4E16 HYDRAULIC CONTROL VALVE SPOOLS, MAIN .............. 70 - 27 4E13 HYDRAULIC CONTROL VALVE SPRINGS, MAIN.............. 70 - 24 4E15 HYDRAULIC CONTROL VALVE SPRINGS, MAIN.............. 70 - 26 4E14 HYDRAULIC CONTROL, MAIN RELIEF VALVE ................ 70 - 25 4H24 HYDRAULIC CYL.,VARIABLE DR.FDR.HSE.-SH ................ 70 - 112 4I4 HYDRAULIC CYLINDER KIT, HEADER LIFT...................... 70 - 118 4I5 HYDRAULIC CYLINDER KIT, HEADER LIFT-SH................ 70 - 119 4I2 HYDRAULIC CYLINDER, HEADER LIFT ............................ 70 - 116 4G10 HYDRAULIC CYLINDER,UNLOADING AUGER SWING .... 70 - 71 4G11 HYDRAULIC CYLINDER,UNLOADING AUGER SWING .... 70 - 72 4G13 HYDRAULIC CYLINDER,UNLOADING AUGER SWING .... 70 - 74 4G15 HYDRAULIC CYLINDER,UNLOADING AUGER SWING .... 70 - 76 4H19 HYDRAULIC HOSE, FEEDER HOUSE ................................ 70 - 107 4H18 HYDRAULIC HOSE,VARIABLE DRIVE FDR.HSE............... 70 - 106 3H4 HYDRAULIC HOSES (FOUR-WHEEL DRIVE) .................... 50 - 149 3I2 HYDRAULIC HOSES (FOUR-WHEEL DRIVE) .................... 50 - 179 4H7 HYDRAULIC HOSES, DRIVE REEL .................................... 70 - 94 4G5 HYDRAULIC HOSES,UNLOADING AUGER SWING .......... 70 - 66 4G7 HYDRAULIC HOSES,UNLOADING AUGER SWING .......... 70 - 68 8E14 HYDRAULIC LOWER HOSES - SIDEHILL .......................... 150 - 21 8E14 HYDRAULIC LOWER LINES - SIDEHILL ............................ 150 - 21 4G11 HYDRAULIC MOUNTING,UNLOADING AUGER SWING.... 70 - 72 4G13 HYDRAULIC MOUNTING,UNLOADING AUGER SWING.... 70 - 74 4G15 HYDRAULIC MOUNTING,UNLOADING AUGER SWING.... 70 - 76 8E24 HYDRAULIC OIL LINE AUTO.HDR.HGT.CONTROL .......... 160 - 7 4F8 HYDRAULIC OIL LINES AND HOSES ................................ 70 - 44 4F11 HYDRAULIC OIL LINES AND HOSES ................................ 70 - 47 4F13 HYDRAULIC OIL LINES AND HOSES ................................ 70 - 49 4D15 HYDRAULIC OIL RESERVOIR ............................................ 70 - 2 3H8 HYDRAULIC OIL RETURN LINES AND HOSES ................ 50 - 155 3I4 HYDRAULIC OIL RETURN LINES AND HOSES ................ 50 - 181 4H14 HYDRAULIC PUMP MTG.,HYDROSTATIC DR.REEL ........ 70 - 102 4H4 HYDRAULIC PUMP, HYDROSTATIC DRIVE REEL............ 70 - 91 4D19 HYDRAULIC PUMP, MAIN .................................................. 70 - 6 4G25 HYDRAULIC REEL LIFT CONTROL LEVER ...................... 70 - 87 8F18 HYDRAULIC REEL LIFT DRIVE SHEAVES ........................ 170 - 6 8E13 HYDRAULIC UPPER HOSES - SIDEHILL .......................... 150 - 19 8E13 HYDRAULIC UPPER LINES - SIDEHILL ............................ 150 - 19 3F15 HYDRO. DR. CENTER SECTION (EATON) ........................ 50 - 106 3E3 HYDRO. DR. CONTROL CABLE MOUNTING (SUNDSTRAND AND EATON) ........................................ 50 - 68 3F11 HYDRO. DR. DISPLACEMENT CONTROL VALVE (EATON) ............................................................................ 50 - 102 6620 COMBINE PC1666

(18-APR-00) PN=18

1A20 6620 COMBINE ALPHABETICAL INDEX - CONTINUED GRID 3G6 3E13 3E23 3E17 3E18 3E13 3F4 3F2 3F3 3E17 3E23 3E23 3D24 3E2 3F6 3F7 3F9 3E20 3F1 3E15 3E20 3E18 3F1 3E20 3E18 3E24 3E24 3F1 3D19 3F13 3F13 3F13 3E22 4H15 3D21 4H14 3F14 3E9 3E11 3E12 3E25 3G1 3G4 3G4 3G9 3F22 3F18 3F20 3E8 3E8 3G1 3F25

HYDRO. DR. LOWER OIL LINES AND HOSES ................

HYDRO. DR. PUMP BEARING (SUNDSTRAND)................

HYDRO. DR. PUMP BEARINGS (SUNDSTRAND) ............

HYDRO. DR. PUMP CYL. BLOCK (SUNDSTRAND) ..........

HYDRO. DR. PUMP CYL. BLOCK (SUNDSTRAND) ..........

HYDRO. DR. PUMP SEAL (SUNDSTRAND) ......................

HYDRO. DR. PUMP SERVO PISTON ASSEMBLIES (EATON) ............................................................................

HYDRO. DR. PUMP SERVO PISTON ASSEMBLIES (SUNDSTRAND)................................................................

HYDRO. DR. PUMP SERVO PISTON ASSEMBLIES (SUNDSTRAND)................................................................

HYDRO. DR. PUMP SHAFT (SUNDSTRAND) ....................

HYDRO. DR. PUMP SWASHPLATE (SUNDSTRAND) ......

HYDRO. DR. PUMP TRUNNIONS (SUNDSTRAND) ..........

HYDRO. DRIVE CONTROL CABLE AND LEVER ..............

HYDRO. DRIVE CONTROL CABLE MOUNTING ................

HYDRO. DRIVE DISPLACEMENT CONTROL VALVE (SUNDSTRAND)................................................................

HYDRO. DRIVE DISPLACEMENT CONTROL VALVE (SUNDSTRAND)................................................................

HYDRO. DRIVE DISPLACEMENT CONTROL VALVE (SUNDSTRAND)................................................................

HYDRO. DRIVE PUMP CYL. BLOCK (EATON) ..................

HYDRO. DRIVE PUMP CYLINDER BLOCK KIT (EATON) ............................................................................

HYDRO. DRIVE PUMP FRONT COVER(EATON) ..............

HYDRO. DRIVE PUMP HOUSING (EATON) ......................

HYDRO. DRIVE PUMP HOUSING (SUNDSTRAND) ..........

HYDRO. DRIVE PUMP HOUSING KIT (EATON) ................

HYDRO. DRIVE PUMP SHAFT (EATON) ............................

HYDRO. DRIVE PUMP SHAFT (SUNDSTRAND) ..............

HYDRO. DRIVE PUMP SWASHPLATE (EATON) ..............

HYDRO. DRIVE PUMP,SWASHPLATE,BEARINGS, AND TRUNNIONS (EATON) ............................................

HYDRO. DRIVE SHAFT KIT (EATON) ................................

HYDRO.DR.-PROPULSION DR.CTRSHAFT SHEAVE........

HYDRO.DR.DISPLACEMENT CONTROL HANDLE (SUNDSTRAND)................................................................

HYDRO.DR.DISPLACEMENT CTL.VALVE GASKET (SUNDSTRAND)................................................................

HYDRO.DR.DISPLACEMENT CTL.VALVE ORIFICE (SUNDSTRAND)................................................................

HYDRO.DR.PUMP SWASHPLATE,BRGS,TRUNNIONS ....

HYDROSTATIC DR. REEL FLOW CONTROL VALVE........

HYDROSTATIC DR.BELT TENSIONING MECHANISM ......

HYDROSTATIC DR.REEL HYDRAULIC PUMP MTG. ........

HYDROSTATIC DRIVE CENTER SECTION (SUNDSTRAND)................................................................

HYDROSTATIC DRIVE CHARGE PUMP ............................

HYDROSTATIC DRIVE CHARGE PUMP MOUNTING........

HYDROSTATIC DRIVE CHARGE PUMP MOUNTING (EATON) ............................................................................

HYDROSTATIC DRIVE CYLINDER BLOCK KIT ................

HYDROSTATIC DRIVE HOSES AND FITTINGS ................

HYDROSTATIC DRIVE LOWER OIL HOSES (SUNDSTRAND)................................................................

HYDROSTATIC DRIVE LOWER OIL LINES (SUNDSTRAND)................................................................

HYDROSTATIC DRIVE LUBE BANK SYSTEM ..................

HYDROSTATIC DRIVE MOTOR (EATON) ..........................

HYDROSTATIC DRIVE MOTOR (SUNDSTRAND)..............

HYDROSTATIC DRIVE MOTOR (SUNDSTRAND)..............

HYDROSTATIC DRIVE MOTOR COUPLER........................

HYDROSTATIC DRIVE MOTOR MOUNTING......................

HYDROSTATIC DRIVE OIL COOLER ................................

HYDROSTATIC DRIVE OIL RESERVOIR............................

6620 COMBINE PC1666

(18-APR-00)

PAGE 50 - 124 50 - 79 50 - 89 50 - 83 50 - 84 50 - 79

GRID 3F25 3E13

50 - 95

3E25 3E22 4H4 3E25 3E5 3E6 3E5 3E6 3E5 3E6 3G2 3G3 8F16 8F16

50 - 93 50 - 94 50 - 83 50 - 89 50 - 89 50 - 65 50 - 67 50 - 97 50 - 98

3E14 3E17

50 - 100 50 - 86

I

50 - 92 50 - 81 50 - 86 50 - 84 50 - 92 50 - 86 50 - 84 50 - 90

6E20 7D15 7D17 7G19 3G12 8D18 6F17 7D1

50 - 90 50 - 92 50 - 59

6C4 8F24 8D19 8G17 8G18 8D16 7F9 7E19 6C13 6C12 8G1 8G2 8F19 8F25 6C14 8G3

50 - 104 50 - 104 50 - 104 50 - 88 70 - 103 50 - 61 70 - 102 50 - 105 50 - 75 50 - 77 50 - 78 50 - 91 50 - 118 50 - 122 50 - 122 50 - 127 50 - 114 50 - 110 50 - 112 50 - 74 50 - 74 50 - 118 50 - 117

PAGE HYDROSTATIC DRIVE OIL RESERVOIR MOUNTING ...... 50 - 117 HYDROSTATIC DRIVE PUMP FRONT COVER (SUNDSTRAND)................................................................ 50 - 79 HYDROSTATIC DRIVE PUMP FRONT COVER (SUNDSTRAND)................................................................ 50 - 80 HYDROSTATIC DRIVE PUMP HOUSING (SUNDSTRAND)................................................................ 50 - 83 HYDROSTATIC DRIVE PUMP HOUSING KIT .................... 50 - 91 HYDROSTATIC DRIVE PUMP SWASHPLATE.................... 50 - 88 HYDROSTATIC DRIVE REEL HYDRAULIC PUMP ............ 70 - 91 HYDROSTATIC DRIVE SHAFT KIT .................................... 50 - 91 HYDROSTATIC DRIVE UNIT................................................ 50 - 71 HYDROSTATIC DRIVE UNIT................................................ 50 - 72 HYDROSTATIC DRIVE UNIT, SHEAVES ............................ 50 - 71 HYDROSTATIC DRIVE UNIT, SHEAVES ............................ 50 - 72 HYDROSTATIC DRIVE UNIT, SUPPORTS ........................ 50 - 71 HYDROSTATIC DRIVE UNIT, SUPPORTS ........................ 50 - 72 HYDROSTATIC DRIVE UPPER OIL LINES ........................ 50 - 120 HYDROSTATIC DRIVE UPPER OIL LINES ........................ 50 - 121 HYDROSTATIC GROUND DRIVE BELTS .......................... 170 - 4 HYDROSTATIC GROUND DRIVE SHEAVES .................... 170 - 4

8G7 7H7 2D2 5E14 1G24 1I1 3H15 5D16 5D16 8C4 3D6 3C8 1B22 1C7 5D9 2D2

IDLER ARM,FDR.HSE.LOWER BELT TGHTNR-SH............

IDLER, BEATER ....................................................................

IDLER, BEATER ....................................................................

IDLER, CLEAN GRAIN ELEVATOR ....................................

IDLER, CRAWLER ................................................................

IDLER, DECLUTCHING ........................................................

IDLER, DRIVE, FEEDER CONVEYOR-SH ..........................

IDLER, DUAL-RANGE CYLINDER DRIVE TIGHTENER ......................................................................

IDLER, FEEDER CONVEYOR DRIVE (FIXED) ..................

IDLER, FEEDER HOUSE (LONG)........................................

IDLER, FEEDER HOUSE DRIVE ........................................

IDLER, PRIMARY COUNTERSHAFT ..................................

IDLER, SECONDARY COUNTERSHAFT ............................

IDLER, SECONDARY COUNTERSHAFT DRIVE ................

IDLER, SHOE GRAIN SUPPLY AUGERS ..........................

IDLER, STRAW CHOPPER DRIVE......................................

IDLER,MID.,FDR.HSE.,L.H.,VAR.DR.-SH ............................

IDLER,MIDDLE,FDR.HSE.,L.H.(VARIABLE DR.) ................

IDLERS, FEEDER HOUSE (REG. FIXED) ..........................

IDLERS, FEEDER HOUSE (SIDEHILL)................................

IDLERS, FEEDER HOUSE (VARIABLE DRIVE) ................

IDLERS, FEEDER HOUSE DRIVE (LONG RICE) ..............

IDLERS, FEEDER HOUSE MIDDLE BELT..........................

IDLERS, FEEDERHOUSE (REG FIXED LESS REVERSER) ......................................................................

IDLERS, STRAW CHOPPER................................................

IDLERS,DIP AND POUR ELEVATOR UPPER CHAIN........

IGNITION SWITCH KEY ......................................................

INDICATOR LIGHT ASSEMBLY, HI PRESSURE................

INJECTION NOZZLE, FUEL (DH) ........................................

INJECTION NOZZLE, FUEL (TH) ........................................

INNER COVER ......................................................................

INNER ROOF ........................................................................

INNER ROOF AND COVERS ..............................................

INNER UNLOADING AUGER COVERS ..............................

INPUT HOUSING, POSI-TORQ DRIVE................................

INPUT SHAFT, TRANSMISSION..........................................

INSTALLATION KIT, SHORT BLOCK (DH) ........................

INSTALLATION KIT, SHORT BLOCK (TH 01) ....................

INSTRUMENT PANEL ..........................................................

INSTRUMENT PANEL ACCESSORIES ..............................

110 - 87 120 - 56 120 - 58 120 - 137 50 - 131 140 - 19 110 - 110 120 - 40 110 - 17 170 - 12 140 - 21 170 - 32 170 - 33 140 - 17 120 - 101 120 - 85 110 - 26 110 - 25 170 - 14 170 - 15 170 - 7 170 - 13 110 - 27 170 - 16 170 - 21 120 - 151 40 - 43 90 - 58 30 - 34 30 - 64 50 - 164 90 - 33 90 - 33 130 - 19 50 - 43 50 - 19 20 - 10 20 - 20 90 - 25 40 - 43

10-19 PN=19