AFTERGLOW glow after
HAEUN HYUN
A1770108
contents front cover
________________01
contents
________________02
introduction ________________03 workflow
________________04
workflow
________________05
final model
________________06
analysis
________________07
conclusion
________________08
references
________________09
back cover
________________10
sketchfab: https://skfb.ly/on6S6 issuu:
introductio
on
about the site: This site is located in the centre of Canberra, and it is the new Parliament House on the Capital Hill. By the time when the old Parliament House was too small for the several hundred to fit, in 1978 the Prime Minister Malcolm Fraser, released the plans to design and build a new Parliament House. To find the suitable design, a competition with up to 329 entries was held. The final design that was chosen in 1980 was by New York based Mitchell/Giurgola & Thorp Architects. The site for the new Parliament House had 6 times the space of the old Parliament House.
the purpose: The main purpose for this study, is to analyse what types of qualities on the current site or even what new qualities that can be added that could possibly be developed for the future. This information and the model is aimed for people interested in possible future developments for the Parliament House in Canberra. It could even be for the future member of the Parliament.
workflow
1. site
2. ground
3. sand
4. vegetation
5. building
6. elevated roadway
final model
section cut
side view
l & analysis Tall posts for the flag It is the highest part of the site
Higher topography in the middle of the site
The building does not seem very high as it is almost similar with the height of surrounding trees.
The surrounding of the building are mostly trees. Does not look very diverse.
conclusion
In conclusion, as seen from the model, section cut and the side view, the Parliament House building itself is positioned quite low, the surrounding trees seems to cover abit of the building and the vegetation does not seem to be diverse. Some possible developments that could be made for this site are to plant various types of vegetation, gradually building upwards to stand out, and possibly add more water systems outside such as a waterfountain. From these developments, members in Parliament would definately enjoy being part of the Parliament, and it could also attract more tourists for beautiful photos.
references
- https://rtrfm.com.au/story/the-latest-in-canberra/ - Google Earth -https://peo.gov.au/understand-our-parliament/parliament-house/australias-parliament-house/#:~:text=Parliament%20House%20is%20one%20of,people%20work%20 in%20the%20building. -https://www.aph.gov.au/About_Parliament/Senate/Powers_practice_n_procedures/~/~/link.aspx?_id=A1D49E705C904AEA927BD4BE95E2FE11&_z=z -http://www.genkin.org/cgi-bin/photo.pl/australia/canberra/ au-canberra-0003
AFTERGLOW glow after
REPRESENTATION lll
DYNAMIC MODELLING