Products

COUPLING WARNING

SGF says you should be wary of unspecified replacement driveshaft flexible couplings

Flexible Couplings are considered an extremely sensitive and key component in a vehicle’s drivetrain. SGF says original couplings are vehicle specific and are tuned and balanced to reduce or eliminate the vibration and disturbing harmonic frequencies generated at different RPMs, and of course to withstand the maximum torque generated by the engine.

SGF says you should beware of copy couplings that can cause vibration and noise issues and, in most cases, early failure. Generally, it says many other low-quality couplings in the market take a convenient ‘one coupling fits many applications’ approach that is prone with potential NVH problems. SGF says its couplings are OE and supplied to many OEMs around the world. It states each coupling is specifically engineered and NVH tuned for a particular vehicle model. SGF is a German company specialising in torque transmission and anti-vibration solutions. Unlike many copy couplings available, SGF says it utilises its trademark Tenpu fibre technology: a combination of cord inlays vulcanised within select rubber compounds that operate in tension rather than pressure or shear load. It says the Tempo fibre reinforcement fibres transmit the majority of the torque whilst the design enables the tuning of the coupling for the specific reduction of each vehicle’s NVH characteristics, resulting in optimal damping and the elimination or reduction of noise and vibration, improved tolerance to shock loads and compensation of radial, axial and angular misalignments. Its couplings also have a highpower density ratio. For more information, contact sales@sgfasiapac.com

NEW FROM PENRITE

The company has been Australian owned and operated for 95 years

Penrite has just released its new Diesel Winter Fuel Treatment additive. The product is said to be ideal for use in alpine areas or in locations where temperatures are expected to fall below zero degrees and where winter fuel is not available. Diesel fuel can form wax crystals at very low temperatures. This can block injectors and prevent fuel from reaching the cylinder. The new Penrite Diesel Winter Fuel Treatment is a single dose product. It is designed to be added to the fuel, where it works by lowering the CFPP (Cold Filter Plugging Point) of the diesel fuel so that wax formation is below the bulk temperature of the fuel. This is important in alpine areas where the risk of wax formation is greatest. In off-road applications such as agriculture, the product may be used in storage tanks and in equipment in the case of an unexpected cold snap occurring before Alpine Fuel is available. Diesel Winter Fuel Treatment is also ideal for use prior to snow and skiing trips, 4WD and off-roading in high mountain regions, diesel fuel supplies stored in subzero degree temperatures, and in farm, agricultural and mining equipment which is used in colder climates. One 375ml bottle treats up to 100 Litres of diesel fuel. To find out more about Penrite and its Australian Made products, visit www.penriteoil.com.au

CTEK INTRODUCES CS FREE

Power to go, wherever you are

CTEK has launched what it says is the world’s first battery charger and maintainer with revolutionary Adaptive Boost technology in Australia. It says it is this Adaptive Boost technology that allows the innovative new charger to get a flat battery going quickly and safely – without the need for plugging into mains power, as it is a portable charger you can use wherever you go. The CS FREE features an internal lithium battery that charges the battery through the unit’s fast USB-C input, and when fully charged, the unit will reportedly hold its charge for up to a year, allowing it to be stored in a vehicle for whenever it is needed. Unlike traditional boosters or jump starters, CTEK says the CS FREE analyses the battery using Adaptive Boost technology, which works out the quickest and safest way to power up and protect the battery to get motorists back on the road within 15 minutes, without damaging the battery or the vehicle’s electronics. In addition to its portable capabilities, when plugged into mains power the new CS FREE acts as a maintenance charger, allowing it to be a complete three in one product that is capable of maintaining the long-term health of your battery. For the modern workshop, CTEK says this useful tool is perfect for use for day-to-day maintenance charging, while also having the benefit of portability for battery related issues when testing out on the road. To learn more about the new CS FREE, go to page 20 of the AAAA’s annual 4WD Special or visit www.ctek.com.au

HUGE GROWTH IN HULK 4X4 CATALOGUE AT COOLDRIVE

The new offering is five times larger than the original

CoolDrive says massive growth in the Hulk 4X4 range of four-wheel-drive equipment and outdoor living accessories has seen it release a second edition catalogue, with the expanded offering over five times larger than the original issue. Available at CoolDrive branches nationally, the now 112-page full-colour catalogue is packed with the latest products available to cater to the everincreasing interest in camping and outback trekking. “We’re very proud here at CoolDrive of the development of the entire Hulk 4X4 range, with this catalogue representing a huge product development push in a short period,” CoolDrive Product Manager, Ben Fraser, said. “The Hulk 4X4 range truly stacks up with any offering available in the marketplace, with an allencompassing range that now caters for practically every off-road situation.” The catalogue is divided into nine chapters encompassing all parts of the outdoors lifestyle, including aftermarket parts, 4WD accessories and safety kits, as well as accessories to make the most out of touring and camping. Featured are the many new product lines introduced to the range since the last catalogue, including aluminium loading ramps, a range of portable emergency power supplies/ jump starters, as well as the Portable Power Pack which CoolDrive says is the original and most advanced battery box, providing transportable power anywhere. There has also been an expansion to the Dual Battery Tray range, made from powder-coated steel for extra protection, with products suiting popular models from Ford, Holden, Isuzu, Mazda, Mitsubishi, Nissan and Toyota. Another handy new innovation from Hulk 4X4 is the Smart Eight Way Switch Panel, which is programmable to control multiple LED lights or electrical devices from an intuitive panel. The significantly expanded Hulk 4X4 lighting range has also been catalogued, with new driving lights and lightbar options complementing the already comprehensive range of minebars, work lights and camping lights. Hulk 4X4 has also partnered with Pro Quip to introduce a new range of Jerry Cans, all certified to AS2906:2001 Australian standard, colour coded to reduce the possibility of using incorrect fuels, and designed to fit standard RV racks with their space-saving design. Other highlights include an adjustable vehicle door step, universal front seat covers, portable compressors, off-road jockey wheels, a wide range of free wheel hubs, brake upgrade systems, and stainless steel exhaust kits. For further information, visit www.hulk4x4.com.au or www.cooldrive.com.au or your local CoolDrive branch.

EVENTURI RELEASE CARBON INTAKE

For the GR Yaris

The Queen’s Enterprise Award winning company has launched its signature Carbon Fibre Intake for the new Toyota GR Yaris and is coming to Australia through Scuderia Autoart. An icon was born with the new GR Yaris and now Eventuri has developed a unique carbon fibre intake system for the new rally homologation model from Toyota. Launched globally, the carbon fibre intake is now available in Australia through Scuderia Autoart, the official importer and distributor of bespoke performance brands from around the world. From passion for cars and performance, Eventuri was founded by a team of engineers and enthusiasts with a background in Aeronautics and says it has established itself as a global benchmark in its segment. Transferring its technology and expertise, Eventuri has specially designed and engineered each component of the intake to provide the turbo with a smooth and free flowing path. With glossy and matte carbon finish variants, the GR Yaris intake has been developed through extensive data logging of temperatures, flow rates and dyno testing. Since the all-wheel-drive sports car comes with a turbocharged engine, heat and volume were the main considerations during development and has been designed to offer the highest possible flow rate whilst maintaining the lowest intake temperatures possible. By ensuring a sealed system, Eventuri says it has improved on the Intake Air Temperatures of the OEM airbox whilst increasing the internal volume to reduce the pressure drop, and therefore reduced pumping losses of the turbo, allowing it to operate more efficiently and reach peak boost sooner to increase performance. Going into the numbers, the intake reportedly achieves a performance increase of 11.2kW and 24Nm that has been tested by various reputable tuners globally who have all reported similar results. These results show an increase in torque and power across the entire RPM range, not just at the peak RPM, explaining why the car feels more responsive and is able to accelerate faster through the gears. The GR Yaris intake system uses the Eventuri Patented Carbon fibre Housing, which provides an aerodynamically efficient airflow path from the filter to the turbo. Due to its unique design, the intake invokes the Venturi effect and maintains laminar flow conditions to reduce the drag on the turbo. After high demand for performance parts for the new GR Yaris, the first deliveries will arrive at the end of June 2021 through Scuderia Autoart and its nationwide dealer network. For more information, visit www.scuderia-autoart.com

TGC NITRILE GLOVES

From The Glove Company

Dion Hoy, the owner of Advanced Mechanical Services, recently reviewed The Glove Company’s TGC Nitrile Gloves. “TGC Black Gloves are the best I have used. My team and I use them daily. I find we work a lot faster and efficiently when wearing them, we can put them through their paces and know they won’t break or interrupt our workflow,” Dion said. “They really are ‘The World’s Toughest Gloves’; they are stretchy, grippy, and best of all, they do not sweat as much as other gloves thanks to the Low Sweat Comfort Technology. “For years I struggled to find a good glove for my team. None of the other gloves we tried held up, so we would just use our bare hands. “I came across The Glove Company at the 2017 Australian Automotive Aftermarket trade expo. The team there took the time to chat with me and explain the difference between their TGC Black gloves versus generic gloves. “I was sceptical, but they assured me the TGC Gloves were custom engineered specifically for the Automotive Industry. Their CEO spent his youth working in the Automotive industry before becoming a chemical engineer. He realised there was no glove that could withstand the work we do. So, he created one. “They offered my team and I sample packs, they claim you have to try them for yourself to see, and then you’ll never go back. A couple days later the team and I grabbed them out and put them to the test, and wow they really were tough. “The Low Sweat Comfort Technology worked, you can feel the difference compared to other gloves. I can easily wear one pair per car service and not worry about them tearing or being punctured. They hold up to brake cleaner, oils, turpentines, fuel. “I’ve never used a pair of gloves so strong or with such an excellent grip. The whole glove is textured with a special micro texture. I grab spanners, filters, greasy hoses and not have them slip from my hand. “Just recently I tried the TGC Orange gloves, which are the exact same glove but hi-vis orange for something different. They didn’t disappoint either. I think the team prefer them in summer as being orange, they found them cooler to wear outside as they don’t absorb the heat as much. “I find the TGC Orange are great for preventing cross-contamination too, as you can easily see what is on your hands. Now we always keep a couple of cases of both TGC Black Nitrile Gloves and the TGC Orange Nitrile Gloves in the workshop. I can’t imagine working without them.” For more information, visit www.theglovecompany.com

ILLUMINATE YOUR WAY WITH LED

LED Autolamps offers a range of lighting solutions for your workshop

Designers and manufacturers of high-quality LED Automotive lighting, LED Autolamps, says it is excited to release a new range of heavy-duty rechargeable lamps. PL175 penlights

Heading up the new range are the slim and compact PL175 penlights which LED Autolamps says are a perfect size which fits neatly in your pocket using the steel pocket clip while being bright enough for quick and instant convenience. The light also features highly efficient COB LEDs – outputting 200 lumens for the main light – and a handy top torch for those hard to see places. Meanwhile, hands-free operation is made simple with a super-strong bottom magnet with the added flexibility of a 360° ball mounted base directing the light exactly where you need it. HH420 workshop inspection wand

The HH420 workshop inspection wand features a 250mm flexible neck extension and a superbright, heavy-duty build. This lamp’s stand-out features include a superstrong magnet and a nifty fold-out hanging hook for added flexibility with hands-free operation, both inbuilt into the base. A battery-saving economy mode with a powerful main light is easily controlled by an on/off dimming wheel that gives precise control of the light output from 50 lumens to a “massive” 700 lumens at full power. It also comes with a top-mounted torch for those hard to get at places. WTB100 and WTB115 mini dual-beam rechargeable work lights

LED Autolamps says the WTB100 and the WTB115 mini dual-beam rechargeable work lights ensure no task will be left unlit with dual 20-degree spot and 120° flood beams, and four power levels. Level one is the directed spot beam with 250 lumens and 400 Lumens output, respectively, while the next three levels control the flood lamp with “incredibly bright outputs” of 100 lumens, 350 lumens, and 700 lumens for the smaller WTB100 and 350 lumens, 700 lumens, and a whopping 1400 lumens for the larger of the two, the WTB115. Getting the light exactly where you need it is easier with a 180° tilt-adjustable base that not only is a super-strong magnet but has the added benefit of a nifty handhold for added convenience, says LED Autolamps. It says these lamps are an absolute must for your vehicle or toolbox, being small enough to fit in your pocket yet powerful enough for any lighting task you have at hand. The entire range offers fast USB charging with a low power discharge and maximum brightness and built-in toughness with basic ingress protection, hardened polycarbonate lens, and oil and chemical resistant bodies. LED Autolamps says they are super-efficient with a cool 6500K light and a CRI of over 80 crucial for correct colour rendering and are easily identifiable with bright red markings. Manufactured to CE and RoHS with no hazardous materials, the new rechargeable inspection lamp range offers a two-year peace of mind warranty and are presented in a single retail blister pack with USB charging cables included. For further information, visit www.ledautolamps.com for your local distributor or call 03 9466 7075.

LEADING THE WAY

Auto Electrical Imports says it is leading the way with its safer, innovative lighting solutions

Auto Electrical Imports (AEI) says it is constantly looking for ways to improve the safety of people and equipment. AEI has recently launched the second generation of its IONNIC LED Beacons, with “exceptional” safety features offering peace of mind for all onroad vehicles. The GEN 2 IONNIC 103 and 106 LED Beacon range builds upon the success of the original IONNIC Beacons. With an all-new hybrid lens design and a more thermally efficient base, AEI says the new GEN 2 103 and 106 series beacons provide improved performance along with industry proven reliability. The GEN 2 IONNIC LED Beacon range includes new optics that reportedly offer brighter and more consistent output, providing better visibility in any type of environment. They bring hybrid TIR and Linear design together for “superior” light output while the polycarbonate outer lens offers high durability and impact resistance. The increased surface area of the new GEN 2 LED Beacon base provides improved heat dissipation that allows for increased light output while the new more thermally efficient design delivers better cooling and a brighter, safer beacon. The IONNIC 103 LED Beacon lights have a SAE class one rated output with 12 user selectable flash patterns, which can be set specifically to suit application or site requirements. They are offered in single and dual colour variants as well as permanent or magnetic mount types. The lights are designed and built to withstand the toughest of environments with a vibration resistance rated to SAE J575 and a polycarbonate lens for high durability. They are low profile at only 64mm tall, reducing the risk of damage from external potential hazards. The IONNIC 106 LED Beacon includes all the same features and specification of the 103 series while being offered in a taller 117mm profile ideal for applications in which a higher profile beacon is required. AEI says it has been a specialist in supplying the safest and most innovative products for the automotive, construction and mining industries for more than 30 years. “At Auto Electrical Imports we pride ourselves on providing the absolute best safety lighting solutions for the automotive industry,” AEI Managing Director, Norman Haupt, said. “We know that to be successful in the automotive industry, it is most important to evolve and respond to change, and we are proud to have a proven history in designing and building innovative systems to meet all of our customers’ needs.” For more information, visit www.ionnic.com

BLIND SPOT DETECTION SYSTEMS

Available from Burg Design

With electronics technology moving so fast in the auto industry, keeping up with it is near impossible however Burg Design says it has been at the forefront every step of the way for over 50 years under the brand of ParkSafe.

Burg Design says it is the original pioneer of OEM quality assured Ultrasonic Front and Rear Parking Sensors in Australia offering the very first sets into our market over 30 years ago by directly supplying many thousands of sets to numerous motor vehicle manufacturers and importers as well as aftermarket installers. Burg Design says it is still at the forefront of this ever expanding automotive electronics industry with the recent development of an extensive range of top-quality Reversing Cameras, Monitors, and Blind Spot Detection Systems (BSD) for all types of motor vehicle applications as well as Agriculture. Burg Design has just released what it says is the most advanced range of Radar/Microwave Blind Spot Detection Systems (BSD) and Ultrasonic Parking Systems ever offered for sale in Australia that are suitable for the aftermarket. It says the range offers easy installation on all types of cars, RVs, utes, vans, buses, trailers and small and large commercial Trucks. Burg Design says all of the ParkSafe products are thoroughly quality tested for performance and durability before being released to market. Further, it states all ParkSafe products come with a minimum three to five years’ warranty, depending on the item and its application. For more information, visit www.burgdesign.com.au

NEXT-GEN BATTERY MASTER ISOLATION SWITCH

Available now from REDARC

In late 2020 REDARC released its next generation Battery Master Isolation Switch that fulfils the requirements of the new Australian Dangerous Goods Standard. Since its launch in 2016, REDARC says the proudly Australian Made BMIS (Battery Master Isolation Switch) has been trusted by OEs like Kenworth to safely isolate vehicle batteries when required and ensure a reliable performance while the vehicle is operating. During the development of the BMIS, it underwent extensive independent testing and validation including rugged field trials to ensure the unit could be fitted as OE equipment. REDARC says this is a prime example of collaboration and cooperation with an OEM to ensure a world best product outcome. Soon after the release of the new Australian Dangerous Goods Standard AS2809:2020, REDARC was proud to release the next generation BMIS (V2), fulfilling the requirement for a Master Isolation Switch under that standard. The new Australian standard is referred to within the Australian Code for the Transport of Dangerous Goods by Road and Rail (ADG Code) which sets out the requirements for transporting dangerous goods by road or rail. The Heavy Vehicle Industry Association affirms that compliance to the Australian standard is required to make road tank vehicles conformant to the legislated standards. Owners and operators of Road Tank vehicles rely upon the manufacturers of safety components like REDARC to assure compliance and reliable safety. REDARC Managing Director, Anthony Kittel, explained isolation switches are assessed as part of the full vehicle safety system under these standards, and this is why REDARC ensured the BMIS meets the criteria and enables the vehicles to operate safely in those conditions. “We have been working for over 30 years (since 1989) with the truck original equipment manufacturers, supplying products they can rely upon. We continue to work closely with our customers to provide products that meet their needs as well as industry standards,” Anthony said. “The upgraded compliance of the BMIS is another example of how our design engineers strive to set the industry benchmark for innovation in electronic vehicle technology.” The BMIS V2 is now available in Australia to comply with AS2809:2020 and in New Zealand where vehicles are required to meet the DG Tank wagons requirements. Two BMIS models are available: the 4PN (positive, negative isolation - part number BMIS4PNV2KIT) and the 4PP (positive, positive isolation - part number BMIS4PPV2KIT). There are also supporting accessories in the BMIS-AP Adaptor plate and BMIS-CK connector kit. Designed and tested to meet stringent industry standards, REDARC says the BMIS reassuringly exceeds the requirements of large diesel engines in 12V and 24V systems and features an ISO 26262 rated dual redundancy system to avoid false triggering that can cause unnecessary electric shutdowns. The BMIS is easy to install from new or as a retrofit. The BMIS-AP Adaptor Plate reportedly makes retrofit installation as simple as possible. For new installations, REDARC recommends the BMIS-CK Connector Kit used on vehicles where a factory harness is not available. Key features:

• Meets requirements of the AS2809:2020

Dangerous Goods Standard • Durable, UV resistant housing which is resistant to rocks and fluids • Dual redundancy feature to avoid false triggering • Continuous self-checking function with an inbuilt LED diagnosis tool • Lockable in the off position for improved safety and theft prevention • Easy to install from new or as a retrofit • Compatible with existing roll-over sensors • Reviewed by independent safety experts REDARC says you can pair the BMIS with a roll over sensor for an enhanced safety solution, explaining that the BMIS can be complemented by REDARC’s Roll Over Sensor (ROS - part number ROS1224.) The ROS enables trucks to meet roll-over sensing requirements by signalling the isolation switch to disconnect power to the truck system in the event of a truck rollover while the BMIS is designed to safely isolate the vehicle batteries. For more information, visit www.redarc.com.au/heavyvehicle

CARBON NEUTRAL LUBRICANTS

Driving sustainability

Shell has a target to become a net-zero carbon emissions energy business by 2050 or sooner. As the biggest supplier of lubricants in the world, Shell Lubricants says it has a large part to play in delivering this1 . The delivery of carbon neutral lubricants takes Shell one small step closer to reaching this goal. Shell says these lubricants help keep the world moving by ensuring machinery can operate consistently and efficiently at the peak of its performance. But behind this performance, there is an ongoing need to balance increased operational output with reduced environmental impact; and as demands evolve, expectations change too. Customers and consumers expect brands to offer solutions that make it easier for them to make sustainable choices. For motorists, it is important to improve the fuel efficiency of road transport in the future and therefore have the lowest impact on the climate. Shell says advanced engine oils such as its Shell Helix Ultra Carbon Neutral offer the same great performance and reliability customers have come to expect and meet the highest American Petroleum Institute’s SP engine oil standards – and is now available with the added benefit of being carbon neutral2 . As well as helping avoid or reduce emissions through material choices and operational efficiencies, Shell says the lubricants are now carbon neutral thanks to carbon offsetting through Shell’s global portfolio of nature-based carbon credits. Shell aims to offset the annual emissions of more than 200 million liters of advanced synthetic lubricants, expecting to compensate around 700,000 tonnes of carbon dioxide equivalent (CO2e) emissions per year, which is equivalent to taking approximately 340,000 cars off the road for one year (Shell notes that actual emissions from driving are sensitive to underlying assumptions). This represents a key milestone in Shell Lubricants’ multi-year strategy to help customers manage their sustainability needs and its ambition to reduce the carbon intensity of its products by avoiding, reducing, and offsetting emissions. Since 2016, Shell says it has reduced the carbon intensity of its lubricants manufacturing by over 30 percent, and over 50 percent of electricity used in its lubricant blending plants now comes from renewable sources. For more information, visit www.shell.com

1 Kline & Co [https://www.shell.com/business-customers/ lubricants-for-business/news-and-media-releases/2019/shell-retainsleadership-of-global-lubricants-market-for-thirteen-consecutive-year.html 2 “Carbon neutral” indicates that Shell has engaged in a transaction where an amount of CO¬2 equivalent to the CO2e amount associated with the raw material extraction, transport, production, distribution, usage and end-of-life of the Lubricants has been avoided as emissions through the protection of natural ecosystems or removed from the atmosphere through a nature-based process.

CELEBRATING 100 YEARS OF RISLONE

Rislone Super Concentrated Fuel Injector Cleaner Twin Pack released

For its Centenary, Rislone has released a special twin pack of its ever-popular Super Concentrated Fuel Injector Cleaner. Rislone says its Super Concentrated Fuel Injector Cleaner with Upper Cylinder Lubricant is the best all-around fuel additive to use with every tank of fuel. According to Rislone, the complete fuel system tune-up helps eliminate noisy injectors and fuel pumps, rough idle, hard starting and hesitation. High performance additives maximise power, performance and kilometres while helping to save petrol by cleaning and lubricating fuel injectors, it says. Rislone adds that regular use in both summer and winter maintains optimum engine efficiency and power; smooths rough idle and eliminates hard starts for cleaner, quieter operation. It also claims the product cleans fuel injectors, increases kilometers and saves on high fuel costs at the pump. The company explains that Upper Cylinder Lubricant helps prevent cylinder, ring and piston wear along with lubricating valves and guides giving longer engine life. The Fuel Conditioner and Treatment protects and lubricates all parts of the fuel system including the fuel pump and injectors allowing more power and performance, it adds. It can be used with all petrol, ethanol E10 E85 and diesel fuels and also all fuel injected, turbo, direct injected and carbureted engines. The EZ Nozzle applicator works in all vehicles including those with capless fuel tanks. Rislone Fuel Injector Cleaner is compatible with Rislone Diesel Treatment and Rislone Octane Booster. One bottle is concentrated to treat up to 76 litres of petrol or diesel fuel. It is safe to use on vehicles with oxygen sensors, catalytic converters and particulate filters and it will not void a manufacturer’s new vehicle warranty. The unique formulation allows it to work in both petrol and diesel fuel engines. For diesel applications this fuel additive complies with the federal low sulfur content requirements for use in diesel fuel motor vehicles and non-road engines. The Rislone Upper Cylinder Lubricant (UCL) additive is specially designed to lubricate the upper cylinder of an engine; however, this action starts in the fuel tank. In the fuel tank, UCL helps prevent rust and corrosion and this process continues into the fuel lines. UCL also lubricates and protects the fuel pump, giving it a longer life and quieter operation. The next step for the UCL formula is to lubricate the injectors, allowing them to work more efficiently. Not only are cylinder deposits cleaned, including gum and varnish, but as the UCL treats the upper cylinder the lubricating film helps to prevent carbon from sticking so that it can be burned. This film completely lubricates the upper piston, rings, guides, valves, and seats. For more product or stockist information, freecall 1800 883 888 or visit www.smitsgroup.com.au

RUBBERTREE ACCESSORIES

Quality, tailor-made accessories for your vehicle

Rubbertree is a ‘NZ/AU based and made’ online automotive accessories store with more than 2,000 patterns on file; providing quality tailored and in some cases manufactured to order solutions specifically for your vehicle. This includes Car Mats, Boot Liners, Seat covers and Sunshades, to name just a few, with these aftermarket parts designed for your vehicle to look and function better and protect the value of your asset. Rubbertree says it strives to supply you with a quality product tailored to the exact fit of your vehicle. Every Car Mat comes with a clipping system unique to what you have in your vehicle so the mat sits in place, and has a non-slip backing. There are three different types of carpet and rubber to choose from, ensuring there is something for everyone. All of Rubbertree’s rubber is non-slip, odourless and waterproof. The rubber is designed with a textured surface to capture all the dirt and spills, eliminating the need for a lip around the edge. Rubbertree’s carpet offering ranges include Classic, Luxury and Platinum carpet – each with a different pile, colour options and non-slip backing and finished off with a stylish binding. Rubbertree explains it also has a range of different materials available for Seat Covers, with each designed to suit a different lifestyle and purpose. Each cover is tailor made to your vehicle so “the cover becomes one with the seat,” with Rubbertree stating that it has covers to suit everyone. Tailor made Sunshades are Rubbertree’s newest addition to its product range. These shades are tailored to the exact pattern of your screen, leaving no opportunity for light to come through and so keeping your vehicle nice and cool. The Sunshade also protects the interior of your vehicle from the harsh sun rays – all it takes is a simple release of the Velcro strap and your Sunshade is ready to go. Rubbertree says its exterior and Ute accessories range include everything from Gap stops and Sunshades to things as simple as air-vent phone holders and bumper protectors. It states that once again, all these products are tailored to your vehicle. For more information, visit www.rubbertree.com.au

NEW FROM THINKWARE

The T700 4G LTE Connected Dash Cam has been launched

Whether you want to protect yourself with undeniable evidence when an incident occurs onroad, capture an event while the vehicle is parked or simply want to record your off-road journey to show your mates, a dash cam will capture every moment. Thinkware says it has an extensive range of dash cams suited to every driver’s needs and has recently launched its brand new T700 Connected Dash Cam. With 4G LTE technology on-board, the T700 Dash Cam connects to your smartphone in real-time from anywhere around the world. The Australian Version of the T700 Dash Cam works with all major network SIM Cards including Telstra, providing extensive coverage throughout Australia. Simply insert an active 4G nano SIM Card (not included) with SMS and internet data into the dash cam to gain remote access to the Connected Features including: • Remote Live View: view real-time footage from

the dash cam in the vehicle with a click of a button. • Real-Time Parking Impact Video: receive an instant notification and access parking incident footage via the Thinkware Connected

App. • Emergency Contact Messaging: in the event of an emergency due to an accident or when the manual SOS button is pressed, the location and video is automatically communicated via

SMS to the registered mobile emergency contact number. • Vehicle Status and Driving History: monitors the vehicle’s motion status including vehicle battery voltage check. This also includes the monitoring of driving history with data analytics on driving behaviour and travel history such as date, time, and distance of journeys. • Captured the Image of the Most Recent Parking

Location: in Parking Mode, this enables you to view vehicle location through the dash cam’s front and rear-view cameras at Full-HD quality. • Remote Firmware Data Update: conveniently

upgrade and update firmware and speed cam data remotely to enhance dash cam features and maintain optimal operation. In addition to these innovative Connected Features, the dash cam also records in Full HD resolution front and rear, producing clear footage of your drive both on-road and off-road. The internal GPS, together with its Safety Camera Alert function, helps to provide location information and warn you of red light and speed cameras. Additionally, it is equipped with the Lane Departure Warning System, Front Collision Warning System, Urban Front Collision Warning System and Front Vehicle Departure Warning. For more information, visit www.thinkware.com.au

TRW ELECTRIC PARK BRAKE PORTFOLIO EXPANDED

New actuator repair kit added

The TRW Electric Park Brake (EPB) has become standard equipment in many vehicle classes in recent years, causing an increase in aftermarket demand with many vehicle owners looking for an alternative to the complete replacement of the EPB brake caliper. ZF Aftermarket says its TRW brand now meets this need with its new actuator repair kit. Like many other comfort features, the EPB was first established in the upper vehicle classes but is increasingly now being used in volume models. Advantages of the EPB include increased driver comfort, more freedom for the car’s interior designers, and allowing the possibility of new driver assistance functions. Although the EPB variations with actuator integrated into the brake caliper are considered very reliable and durable, damage can still occur – as with any technical system. Workshops are able to make use of ZF Aftermarket’s extensive product range for repairs. Under the TRW brand, ZF says its Aftermarket organisation offers spare parts for virtually all brake repair cases, and a new service-oriented product has now been added to the EPB portfolio. Until now, workshops have had to replace the entire EPB brake caliper, even if only the actuator was defective. The electric actuator can fail even if the mechanical part of the brake caliper is still intact, more often after a long period of the vehicle standing idle – when the brake pads can detach from the disc and thus overload the engine. ZF Aftermarket says this is why it now offers the new actuator repair kit as a low-cost and resourcesaving alternative to complete replacement. The kit consists of the electric actuator, two fastening screws and an O-ring, with which the EPB can be repaired in a short time and at low cost for the customer. The actuator repair kits will soon be launched for the following models: Audi A3, A4, A5, A6, A7, A8, TT, Q3, Q7, Q8; BMW 5 series, X3, Z4; Jaguar F-Type Convertible; Seat Ateca, Leon, Alhambra; Skoda Karoq, Kodiaq, Superb; and Volkswagen Golf VII, Passat, CC, Arteon, Tiguan, Touareg. ZF Aftermarket also has plans of extending its range

INTRODUCING RHINOHIDE ARMOR

The only available 4WD protection system that is rated for highway use

In 2016 Australia saw the release of an innovative new idea for 4WD enthusiasts: Rhinohide. When Rhinohide was launched, it offered a robust 4WD paint protection system that allowed users to venture down the tightest of tracks and explore the most challenging conditions before emerging with their paintwork unscathed. The Rhinohide product got national coverage with its debut on Australia’s Shark Tank and piqued the interest of not one, but three of the ‘sharks,’ resulting in Rhinohide Founder, Marc Berryman, taking investment from Dr Glen Richards and Andrew Banks. The small Australian company’s initial concept used magnets to hold the custom moulded high impact ABS panels to the vehicle. The magnetic system, whilst capable, did have some limitations – in particular, it could not be used on the highway and also required routine maintenance and cleaning. Because of this, in 2020 under the restraint of the COVID-19 lockdown, the Rhinohide product development team went back to the drawing board to overcome these issues. The team spent almost 12 months undertaking extensive research and development to redesign the system from the ground up. “The new Rhinohide product is the clear leader in removable 4WD protection systems and the only available system that is rated for Highway (speeds of up to 130km/hr) as well as off-road use,” Rhinohide Founder, Marc Berryman, said. “It is also the only system which allows paintwork to breathe and avoid chaffing from the system itself thanks to a unique air gap between the panel and the paint surface. “The panels are the clear class leader in attachment technology, with their new Armor-Lock Attachment providing impact absorption through a patent pending ‘shock absorber’ built into the mechanism. of complete TRW EPB brake calipers. New to the range will be versions for the following models: Audi A4, A5, A6, A7, A8 as well as Q3, Q5, Q7, Q8 and R8; and BMW 8 Series Coupé/Gran Coupé/ Convertible. The brake calipers will be available in the same colours as used in the original equipment (OE), including black, red, grey and ultramarine. Some vehicle manufacturers use an attractive colour design not only for the EPB, but also for the caliper of the service brake. Therefore, ZF Aftermarket also offers a wide range of coloured brake calipers which can be fitted to many models from the Volkswagen Group, as well as cars from Mercedes-Benz, BMW, Alfa Romeo, Fiat, Peugeot and Land Rover. The product range also includes spare parts for luxury cars and sports cars. High-performance and high-quality brake calipers in the OE colour are available under the TRW brand for sports cars such as the Lamborghini Gallardo and the MercedesBenz SLC, and also for powerful SUVs such as the Range Rover Sport and for top sports models such as the Audi S6 or BMW M8. For more information, visit www.zf.com/au

“The system is also the only detachable panel protection system to have a security fastener with tamper-proof key to give peace of mind against it being stolen when parked in carparks, something no other magnet system can compete with. “It really is the world’s toughest panel protection system.” To learn more about the Rhinohide Armor system, please see page 16 of the AAAA’s annual 4WD special, or visit www.rhinohide.com.au

OPTIBELT DELTA CHAIN CARBON TIMING BELT

Driving high performance vehicles forward

High torque applications such as superchargers on drag cars and high-performance motorcycle drives demand a high-performance product which is where Optibelt says its Optibelt Delta Chain Carbon timing belt excels. The Optibelt Delta Chain timing belt can reportedly provide 100 percent power transmission compared to high performance rubber timing belts. The polyurethane construction combined with the carbon fibre cords of the Optibelt Delta Chain Carbon delivers a product that is resistant to contamination by water, a wide range of chemicals, oils and fluids. At the same time, the wear resistant red bonded fabric increases the sheer strength of the teeth meaning that constant and fast acceleration is possible, making the Optibelt Delta Chain Carbon the perfect partner in style and high-end performance, says Optibelt. Driving development for Australia’s first designed and built performance electric motorcycles

Savic Motorcycles says it is the first in Australia to design and build high performance electric motorcycles. These exceptional motorcycles required an exceptional drive and for this Savic says it called on the engineering expertise of international leading drive belt manufacturer Optibelt, who specified the Optibelt Delta Chain Carbon timing belt for this application. Compared with a roller chain drive, Optibelt Delta Chain carbon timing belts are cleaner, lighted, smoother and quieter and require no adjustments resulting in less maintenance and a longer life cycle. All these qualities were essential when designing a drive system for these highperformance motorcycles. The man behind the Savic Motorcycles is 28-year-old engineer, Dennis Savic, who together with a rapidly growing team, has developed three different specifications of their electric motorcycles, the C-Series. This follows the launch of their concept prototype at the 2018 Australian Motorcycle Expo, their second-generation prototype in November 2019 and the production prototype in 2020. The motorcycle prototypes are all direct drive to the rear wheel where the in-house designed rear wheel pulley has three spokes which line up perfectly with the spokes of the rear rim, which is also designed and developed by Savic and his team. The belt width running on the motorcycles is 36mm which is the widest belt in the EV market according to Savic principal, Dennis Savic. The range offered now comprises three models being the Alpha fitted with an 11kWh battery for a 200 km range; the Delta with a 9kWh battery offering a range of 150km; and the commutefocused Omega with a modest range of 120km. All are reputedly competitively priced, starting from approximately $12,990 AUD. With the prototypes now virtually complete, compliance testing underway and the first production run of 50 motorcycles all pre-ordered, the team expect to commence production by mid2022. For more information, visit www.optibelt.com

TRICO LAUNCHES NEW RANGE

New Exact Fit speciality wiper blades now available

As modern vehicles grow in complexity, so do the wiper systems employed on them, resulting in the addition of several specialty wiper arm types and connections. In order to stay one step ahead of the development, Trico says it has introduced a range of blades designed specifically to meet the needs of these vehicles and arm types. Its new Trico Exact Fit specialty beam blade wipers have been designed to fit a range of modern and late model arm types. The range has been launched as a direct OE replacement and features Trico’s patented frameless sprung steel beam, as well as a 100 percent natural, UV treated rubber element and slim line design blade. Each blade is supplied with an exact fit connection which Trico says ensures easy, seamless fitment straight out of the box with no adaptors required. The new Trico Exact Fit range has been built to meet the needs of three specialty wiper arm types – French Bayonet (Renault), Fitted Zone (Subaru/ Mazda) and Slide lock (Mercedes) – and has been designed to complement Trico’s already popular multi-fit bean blade programs. Trico says the addition of these three new specialty ranges can ensure your workshop has the right wiper fitment cover for over 99 percent of the Australian car parc. The Trico Exact Fit fitted zone range covers the new “FZ” arm type found on new Subaru and Mazda vehicles and is available in lengths from 400mm to 700mm. The Trico Exact Fit French Bayonet range is compatible with most late model Renault and Citroen vehicles including the popular Renault Megane and is available in blade lengths 350mm to 700mm. The new Exact Fit Slide Lock range is designed to exclusively fit the new Mercedes wiper arm connection found on most new Mercedes vehicles from 2018 onwards and is available in lengths 450mm to 700mm. The new Trico Exact Fit range is available for order today and Trico says finding the right wiper blades has never been easier, thanks to the three-step vehicle application guide which can be found at www.tricoproducts.com.au Trico says that as a leader in global windscreen wiper blade manufacture, it has always been the brand that offers superior wiper performance and quality. For more information on Trico Wiper Products, call 03 9271 3288 or visit www.tricoproducts.com.au

NEW EUCA 15L BAG IN A BOX RANGE

No more hard to recycle or dispose of plastic drums

The team at Euca has re-introduced its whole liquid cleaning product range, now available in its new eco packaging that it says will eliminate unwanted land fill and solve the recycling problem encountered with the current use of bulk 10lt and 20lt Plastic drums. Euca’s desire is to change how you buy and handle bulk liquids, and currently on offer is the ability to trial its unique “Bag in a cardboard Box” 15lt Containers. Euca says that although the existing plastic drums are designated “recycle #2, being a good recycle plastic, the issue has always been in councils accepting these drums and then the recycling companies actually recycling them due to not knowing what chemicals had been stored in them.” The recycling of a drum has required washing the drum three times, removing the cap, tap and any other accessories and removing the label. It says that obviously, this ends up becoming too hard for many and so most of the drums have been going to landfill. The new Euca Eco Box is Designed to help our precious ecological system via a huge reduction in the use of plastic, less transportation fuel use, minimal water cleaning required and a decline in landfill use. Key features:

• Easy to use, set up and pour straight from the box; • Can be used to refill any other container; • Box made from 30 percent recycled cardboard material; • The cardboard is again recyclable; • Plastic bladder is recycle #4 LDPE – it just requires a quick rinse and drop off at any supermarket soft plastic REDcycle bin; • 70 percent less plastic used to make the bladder compared to a plastic drum; • Lessening of landfill plastic due to ease of recycle compared to Plastic Drums; • Reduction in freight / oil use / pollution as 7000 bladder bags fit on one pallet in transit where 7000 plastic drums takes seven semi-trailers to move; • No need to wash drums, allowing for massive precious water savings; and • No need to transport drums on mass back to recycle, allowing for more pollution savings. Euca – part of Proud Products – says it has a comprehensive range of premium quality products that covers all aspects of sanitation and cleaning at extremely effective costs based on use. Proud Products is a family-owned business with everything made in Altona Victoria, using all locally sourced raw materials. For more information, visit www.eucaonline.com.au

NEW DBA STREET SERIES BRAKE PADS

Launched only two months ago, these new brake pads are already exceeding expectations

Disc Brakes Australia (DBA) says the uptake of its new DBA Street Series brake pads range two months on from its local launch into the Australian market has been nothing short of impressive. This all-new product line of Street Series brake pads from DBA is aimed at the OE replacement market and was launched nationally in April. The company says the program has already exceeded its expectations. “After only two months it is fair to say that our new product is being well received by the trade and fitters alike,” DBA Marketing Manager, Lars Mehlan, said. “Product availability in the market is strong with a large network of brake specialists committed to the program, and we are also about to launch some major trade initiatives.” Lars says the initial success is testament to the hard work that has gone into developing the program. “The whole team has done a fantastic job. We have put our decades of braking development experience into this product, and we now have a pad that matches our long-established Street Series rotor range in terms of market coverage, product quality and performance,” Lars said. A number of technical features around the pad design and friction composition have been employed to create a brake pad that according to DBA consistently performs at OE level, if not better. Depending on the exact specifications of the application, DBA offers either a ceramic or semimetallic formulation for the best result. All friction material undergoes thermal stability profiling (TSP), which in conjunction with the titanium dioxide-infused bed-in stripe leads to the shortest bed-in times and optimal braking performance. The friction material used is copperfree for low dust emission in accordance with NSFI regulations. The brake pads feature chamfers to reduce brake harshness and facilitate drive comfort, slots for improved thermal stability, and application-specific multi layered elastomeric coated shims for reduced braking noise. Each set of Street Series brake pads is supplied with high temperature lubricant, detailed bedding-in instructions, and sensors and other hardware where applicable, ensuring installation times are kept to a minimum. DBA has introduced an impressive 750 different SKUs as part of its initial launch program, claiming a market-leading 95 percent-plus coverage for every application. The parts are catalogued in DBA’s online database accessible via their website. Each part number also comes with a comprehensive listing of corresponding brake rotors as well as alternative DBA performance brake pads. The all-new range is being distributed via DBA’s seven distribution centers around Australia and New Zealand for immediate availability. For further information, contact DBA at 1800 730 039 or sales@dba.com.au or visit www.dba.com.au

COMMAND GO THROTTLE CONTROLLER

Sales and vehicle application growth as rapid as the performance provided

Command Auto says it has led the market in ECU cruise controls for over 30 years and is a natural fit for the latest electronic technology. It says with the new Command Go Throttle Controller, you can transform the acceleration performance of your vehicle while reducing throttle lag and increasing vehicles responsiveness. Command Auto offers a national stockist and installer network, and point of sale displays are also available. The Command Go Throttle Controller is suitable for more than 700 vehicle applications and has been developed and tested on Australia’s most popular vehicles. Key features and benefits:

• Reduces throttle lag. • Adapts to driving habits. • Six different modes. • Nine different sensitivities per mode. • Anti-theft function for added security. • Suits Automatic and Manual transmissions. • Unique Smart Learn function. • Provides a smooth acceleration. • Easy plug and play installation. • Discreet dash mount display. • Back-lit LCD display. Modes Include:

• Eco Mode – best for fuel economy, slower acceleration. • Intelligent [Intelli] Mode – detects and monitors driving habits, elects appropriate acceleration setting. • Boost Mode – improved throttle response time, smooth acceleration. • Sport Mode – quick throttle response, increased acceleration when exiting corners, best all-around effect. • Elite Mode – superb acceleration performance. • Bypass Mode – accelerates as normal factory setting. • Anti- Theft Function (ATF) – ATF will lock the throttle inhibiting the car from accelerating • One-Touch Overtaking Function – M button will jump directly to Elite Mode (while driving) to facilitate overtaking. For more information, visit www.commandauto.com.au

PRO QUIP CELEBRATING 30 YEARS ON TOP

“The little Aussie company with the world’s largest fuel and water can range”

For 30 years now, Pro Quip International has been supplying the Australian market with its everexpanding Pro Quip Metal Jerry Can Range. Pro Quip started out in 1990 with just one colour (green) and two sizes (10L and 20L) before working with the Australian Defence Force, Government Departments and Regulatory Bodies saw this range expand to 60 varieties incorporating three sizes and over ten AFAC Approved colours. As the preferred supplier to the ADF, all Australian Fire and Emergency Services and numerous Government Departments, Pro Quip says it has been able to bring this range to the Automotive, Industrial, Agricultural, Mining and 4WD Aftermarkets, “particularly to those who recognise the need for quality and functionality over just price.” To complement its extensive Metal Jerry Can Range, Pro Quip has also been providing its Australian Made Plastic Fuel and Water Can Range for over 20 years now. With 30 varieties incorporating seven colours and six sizes, including the new Australian-exclusive 15L Plastic Fuel Can, Pro Quip says its overall Fuel and Water Can Range far exceeds anything else on offer in the world. Both the Metal and Plastic ranges are supported by “the most comprehensive array of spare parts and accessories,” including mechanical and automatic Shut-Off Pourers, Flexible Pourers, replacement Seals and Caps. In addition to the Pro Quip Branded Fuel and Water Can ranges, Pro Quip says it continues to distribute some major international brand names in the Australian market. Pro Quip says the US-made Safe Jack range of Bottle Jack and Hi-Lift Jack Accessories are a great example of it bringing the highest quality option to Australia. The Safe Jack range reportedly provides safety and confidence for those modified and lifted 4WD vehicles that are beyond the capabilities of the OEM jacks provided. Pro Quip says that whilst some businesses attempt to copy products with cheaper, sub-standard materials and workmanship, Pro Quip remains committed to the best, safest and highest quality Safe Jack range. The Off Road and 4WD market is a very important segment for Pro Quip and interacting with its customers has become a key contributor to continually assessing the market needs and developing products accordingly. With thousands of followers on Instagram (proquip_intl), Pro Quip regularly features stunning images of what Four Wheel Driving is all about, with customer submitted photographs of some of the most beautiful corners of the Country. To see the full Pro Quip range, visit its newly revamped website at www.proquip.com.au

TOUGH-AS MATS

Manufactured in South Australia, from Australian sourced materials

Tough-As Products says it is the Australian market leader in premium padded work mats and covers. Tough-As Products have designed the Multi Mat which is ideally suited to the 4x4, off road and camper enthusiast. The Multi Mat is a 1.5m x 0.5m padded mat which is 10mm thick and weighs just 1kg. The mat is perfect for keeping you clean and dry when making running repairs or checking equipment down on the ground. The Multi Mat works as a padded barrier from the harsh ground when kneeling and lying down, giving you comfort and protection while being compact and easy to stow away. Tough-As says padded work mats should be an essential part of your tool kit when going into the Aussie outback, keeping you out of the dirt when checking over the vehicle and setting up camp.

Key features and benefits:

• Protect your knees, hips and back. • Keep your clothes, tools, and parts clean and organised. • Stays clean - grease and dirt wipes off. • Durable, premium grade PVC outer. • Closed cell, soft high-density foam inner. • Welded Seams for long life (no stitching). • Chemical and stain resistant. • Waterproof. • Made for Australian conditions with a fiveyear UV warranty. • Tear and cut resistant. The Multi Mat comes in a variety of colours and can be individually personalised with your name, logo or club emblem. Tough-As Work mat distributors are also being sought in key territories around Australia. For more information, visit www.tough-as.com.au or ask about Tough-As products at 4x4 retailers around Australia.

NEW AND EXCLUSIVE PRODUCT RANGES

Making the AutObarn and Autopro difference

BAPCOR Retail says it has introduced a series of premium quality automotive tools, equipment, and accessories ranges exclusive to its 245 store AutObarn and Autopro retail network. AutObarn and Autopro now reportedly offer customers unprecedented choice and value through these new exclusive product ranges. Amongst the additions is the new, trade quality, Chicane Tools range. Taiwan manufactured to ANSI standards and providing a full range of hand tools and tool storage equipment, BAPCOR Retail says this value priced, complete tool range was developed to provide trade quality tools and equipment to auto enthusiasts and technicians at unprecedented value for money. Most Chicane Tool products in the range are supported by a lifetime warranty with the initial exclusive range covering 250 products including hand and speciality tools along with ergonomically designed and functional workshop storage units. Testament to the quality that can be expected from the Chicane Tools range is the selection and utilisation of these tools and storage units by one of Australia’s leading Supercar teams, Tickford Racing. Another exciting new product range from AutObarn and Autopro is the Vyking Force pressure washer, generator and accessory range. The initial Vyking Force product range includes electric and petrol-powered Pressure Washers and Open Frame Generators with Wet and Dry Vacuum Systems and Inverter Generators to join this exclusive high-quality range during 2021. All Vyking Force power equipment products are reportedly sourced from ISO quality standard manufacturing facilities located around the world. This new and exclusive range is also supported by a full range of spare parts along with a nationwide service network to provide total trade and DIY customer support. A two-year warranty supports the vast majority of products in the Vyking Force range. AutObarn and Autopro also sells the Motospray automotive panel and surface repair product range alongside other BAPCOR Retail and Trade outlets. BAPCOR Retail says this range of highquality paints, undercoats, sandpapers and associated panel repair products represents outstanding value for money while offering DIY repairers reliable quality. BAPCOR Retail says its exclusive Rough Country product range ensures 4WD enthusiasts are also very well serviced at both AutObarn and Autopro, providing a range of quality recovery equipment, off road components, touring products, trailer accessories and camping products including 12-24 Volt fridges and a full range of driving lights. Complementing the Rough Country 4WD product range is the XPlorer range of outdoor adventure products including roof racks, tie downs, caravan accessories, wheel and tyre accessories, vehicle mirrors and much more. Ensuring DIY enthusiasts have access to quality electrical equipment and consumables, the exclusive Voltage range of electrical globes and battery chargers / jump starters from AutObarn and Autopro provide quality and reliability to this key automotive aftermarket product segment. The Garage Tough (GT) range of entry level hand tools and DIY products are said to provide everything that a car owner needs to have in the garage. Progressing this concept is the Extreme Garage range of workshop tools and lifting equipment. This exclusive range is said to let automotive enthusiasts kit out their garage into their own repair workshops using strong and safe trade quality products including a new range of power tools and tool kits. “The worldwide sourcing and development of our exclusive automotive product ranges is a key pillar in BAPCOR’s commitment to provide the broadest range of quality parts, tools, accessories and equipment to Australian car owners,” BAPCOR Retail General Manager-Private Label, Richard Wood, said. “The breadth of our exclusive automotive product brands and ranges ensures that any AutObarn or Autopro store is a complete one-stop destination for our customers’ automotive requirements.” For more information, visit www.bapcor.com.au

SNAP-ON TRITON-D10 DIAGNOSTIC TOOL

Includes scan, component test information and lab scope capabilities

Speed and certainty are an essential part of modern automotive fault diagnoses. Being able to isolate an issue confidently not only reduces costly downtime but allows you to fix the problem quickly and improves your bottom line. Snap-On says this is where its new TRITON-D10 comes in. Rugged, fast and equipped with the latest scan, component test information and lab scope capabilities, the TRITON-D10 allows technicians to dig deep into the systems of a vehicle and evaluate performance against comparative data to make accurate and efficient decisions on every complex repair. “Our latest scan tool allows technicians to act quickly when a vehicle comes into the workshop and needs a diagnostic evaluation. This new superfast intuitive scan tool doesn’t bog you down by showing unrelated data, but only what you need to know for the job,” Snap-on Tools Diagnostics Team member, Paul Lynch, said. “Using Fast-Track Intelligent Diagnostics, the TRITON-D10 filters data and delivers smart shortcuts to allow technicians access to information directly related to the diagnostic trouble code. “The Snap-on TRITON-D10 takes the guess work out of automotive fault diagnoses, and provides technicians with the answers they need to complete the repair efficiently and confidently.” Snap-on says Fast-Track Intelligent Diagnostics systematically eliminate unnecessary information to provide technicians with only the specific data and resources that they need to make repair decisions on the vehicle under the current circumstances. Hardware

Designed and built specifically for the automotive industry the TRITON-D10 features a durable, streamlined design with thin, rugged handgrips, an integrated scope with enhanced memory for capturing intermittent glitches and a 255mm or 10-inch capacitive colour touchscreen display. Software

The TRITON-D10 offers sophisticated verification and testing functionality, including advanced graphing features and OEM-level data, plus a guided Component Test Meter/scope for verifying component failures with known good results. With an industry leading two second boot-up time, as well as a super-fast full system code scan, Snap-on says technicians can get to work right away. Experienced-based software

Working with complete confidence means getting the answers that technicians need without any unnecessary distractions getting in the way. FastTrack Intelligent Diagnostics enhances workflow and, along with Smart Data for relevant vehicle and code-specific PIDS, allows access to pre-filtered functional tests and guided component tests to verify repairs.

NEW CAR STACKER

STENHØJ Australia has widened its product range

Molnar Car Stackers are now available for the automotive sector. With many automotive sites growing in popularity, STENHØJ Australia says clients have been coming to it asking for solutions to be able to retain their same inner-city location whilst expanding their car parking facilities. It says vehicles are often being stored longer at workshops and need to be stored safely without causing overcrowding. It says the solution is its new Molnar Car Stackers, which help create efficiency and profitability while being easy to use. The stackers are said to allow workshops and dealerships to increase returns by maximising useable space, and to create extra work bays for extra cash flow and greater efficiency and significantly increased profitability. Two different models are currently available: the Molnar Laser 4.3CP (three car stacker) and the Molnar Laser 2.2CP (two car stacker). STENHØJ Australia says it has been calculated that if a work bay can generate $1,000 per day, this equates to $250,000 extra cashflow per year, resulting in $1,000,000 extra cash flow over a four-year period. By introducing Molnar Car Stackers, workshops and dealerships can increase the number of work bays on their site, thus improving efficiency while avoiding the cost involved to relocate to larger premises, or outside of their current locality. The new Molnar Parking System serves as dependent parking, above-ground parking, without requiring a pit. “Lower space has to be free to allow access for Customer support

The TRITON-D10 comes standard with Snap-on Customer Care, plus 24/7 online training and support, industry-focused national online training, flexible financing and exclusive access to the Snap-on Cloud. For more information, talk to a participating Franchisee or other sales representative, or visit www.diagnostics.snapon.com

parking on the lifting platform,” Molnar Parking Business Development Manager, Kevin Dawes said. Kevin says he has recently received feedback following an install of a new car stacker in a South Australian dealership that the business’ customers are extremely impressed with the Molnar Car Stackers and the impression of having created a very modern workshop. Molnar car stackers carry the same values as Molnar hoists: ISO9001 certified production, three years warranty, national installation/service network and strong after sales support. For more information please, contact 1-300-MOLNAR (1300 665 627), or Kevin Dawes direct on 0488 468 488 or kda@stenhoj.com.au