7 minute read

4WD

BEAT THE HEAT

The company offers an extensive range of transmission coolers

Automatic transmissions include a number of rubber seals and other components that are sensitive to high temperatures and changes to the heat cycle. This is the main reason why heat is the number one cause of automatic transmission failure. The more the transmission’s heat cycle is reduced, the longer the seals and other rubber components will last. Lowering the transmission temperature also maximises the transmission’s oil life. As the largest manufacturer of 4WD and tradie ute transmission oil coolers, Wholesale Automatic says it fully understands the negative effects that heat can have on automatic transmissions. It says the best way to mitigate the effects of heat on an automatic transmission is by using a quality manufactured oil cooler kit specific to the vehicle.

Wholesale Automatic designs and manufactures a full range of oil cooler kits in Australia to meet the needs of its customers, especially those who tow, go off road, or carry any type of load. All of Wholesale Automatic’s coolers are mounted on heavy duty, one-piece folded brackets that have been dual coated with zinc and finished in Mannex Black. Every kit is engineered to withstand rough surfaces, including corrugated roads. Each cooler is ready for DIY install and comes with everything required, including full colour stepby-step fitting instructions. Wholesale Automatic does note that a cooler kit should not be used when the mounting bracket has been made from stainless steel. It should also not be used if it has not been made as a single piece mount bracket. The company warns to always avoid mounting systems that include two-piece mounts or very flimsy straplike brackets. For more information, call Wholesale Automatic on 03 9762 8004 or visit www.automatictransmission.com.au

FRAM 4WD FILTER KIT RANGE EXPANDED

Providing maximum performance and durability on and off road

Filpro Automotive has expanded its range of Fram 4WD Filter Kits with multiple new applications and also an extended range of filter kits which now include cabin air filters where required. Filpro Automotive says it makes for the complete servicing solution, packaged conveniently in the one box with one reference number. Each Fram 4WD Filter Kit includes: • Air filter – providing superior protection for strenuous driving conditions. The advanced filter media has been stringently tested and has an increased dirt holding capacity- surpassing ISO 5011 testing standards. • Fuel filter – serving a vital function in today’s modern tight-tolerance engine fuel systems.

By removing rust and dirt particles from petrol or diesel, fuel filters protect fuel pumps and injectors from rapid wear and failure. • Oil filter – ideal for drivers who push their vehicles, whether in stop and go traffic, by towing, or driving in extreme weather conditions. A blend of cellulose and synthetic

microscopic fibres provide an ideal balance of dirt-trapping and dirt-holding capacity, whilst providing optimum oil flow to the engine. • Cabin air filter (where required) – allowing travelers inside the vehicle to breathe cleaner air by filtering out pollen, allergens, exhaust fumes, dirt and dust that enter the vehicle through the cooling/heating system. Filpro

Automotive says Fram Cabin Air Filters can eliminate up to 98 percent of these impurities. To find the right filter fitment, visit www.framfilters.com.au to use the online catalogue tool. For further information, contact Filpro Automotive on 0400 878 837 or via arossiter@filpro.com.au

TERRAIN TAMER EXPANDS PARABOLIC LEAF RANGE

The innovative range now includes Toyota Landcruiser 70/73/75 series applications

Terrain Tamer says it has recently expanded its range of Parabolic Leaf Springs to now include Toyota Landcruiser 70/73/75 series models, utilising the same impressive parabolic design as the popular springs previously released for Toyota Hilux and Landcruiser 76/78/79 Series, Ford Ranger, Mazda BT50 and Mitsubishi Triton. Terrain Tamer says its Parabolic Leaf Springs’ unique design offers the best of both worlds, helping the spring to flex while still providing the strength needed to bear the weight of heavy loads. It explains that this is particularly useful in 4WD applications, carrying excessive load on the driveline or when challenged with difficult terrain, as the flex allows the spring to give a little when the driver hits a bump in the road. It says the design allows the differential housing to rotate with the springs and effectively provides a smoother ride, reducing the shock transferred to the crown wheel and pinion. Terrain Tamer states that standard leaf packs stay set with almost no flex at all, and the same force would cause more shock to the vehicle and driver. Essentially coupling a more comfortable ride with a strength not afforded to traditional comfort springs, Terrain Tamer’s parabolic springs are well suited to vehicles close to their GVM. They contain fewer leaves than regular leaf springs and get their name from their tapered parabolic design, meaning the spring is thicker in the centre and thinner toward the ends, rather than the usual linear style. Terrain Tamer says this design eliminates the weight of often heavy, thick, traditional leaf packs, dramatically reduces the unsprung weight of the vehicle and frees up weight for heavier loads or towing. Through extensive research and development, Terrain Tamer says it has found that the new shape provides better axle articulation, as well as almost no interleaf friction, allowing the spring to compress or extend with ease without touching each other until there is a reasonable load on the vehicle, up to 500kg. For more information, call 1300 888 444 or visit www.terraintamer.com/suspension

FORMULA 4X4 AND 4WD 24/7 PARTNER UP

Formula 4x4 and 4WD 24/7 have extended their partnership for another year

Formula 4x4 has been part of 4WD 24/7 since early 2019 and some of the first interactions can be seen on the Fulcrum Suspensions YouTube channel where the Formula 4x4 lift kit range was fitted to Graham Cahill’s Isuzu D-Max and tested on Australia’s toughest tracks. Formula 4x4 is backed by the knowledge and experience of Fulcrum Suspensions. The Formula 4X4 range was developed by Fulcrum Suspensions locally, and entered the market with a focus on affordability, comfort and performance. Formula 4x4 is designed specifically for Australian conditions, ensuring they perform in all harsh Aussie terrains, as well as for everyday on-road travel. Formula 4x4 says it is always expanding its product range and is constantly on the hunt to improve its existing products. Formula 4x4 says it has recently released a range of newly engineered steering dampers which cover a range of older 4WDs that were in desperate need of a comfort solution. It says that now when purchasing a Formula 4x4 lift kit you can get the complete package, receiving both front and rear Formula 4x4 big bore shocks, plus a brand-new Formula steering damper. Formula 4x4’s current range of products reportedly include industry leading lift kits and many more other products. The lift kits include Formula 4x4 shocks, leaf springs, torsion bars, ReadyStruts and also utilise one of a kind SuperPro bushings specially designed for Formula 4x4 shocks. Formula 4x4 states that its lift kit is a onestop complete upgrade package for anyone’s four-wheel drive. Formula 4x4 states that securing the latest partnership allows 4WD 24/7 to continue to utilise and demonstrate how valuable, affordable, comfortable, and strong the Formula 4x4 range is. Showcasing Formula 4x4’s capability in real-world situations and performing to the highest standards, Formula 4x4 states that its lift kits have already given 4WD 24/7 a true understanding of reliability and that this partnership will strengthen it even further. Formula 4x4 says it is thankful to maintain its partnership with 4WD 24/7 and hopes they can both continue to provide Australians with outstanding entertainment and suspension solutions. For more information, visit www.fulcrumsuspensions.com.au/4x4-suspension

AEROKLAS EXTENDS CANOPY WARRANTY

The warranty period now spans four years

Aeroklas has announced its customers can now enjoy an extended warranty on the company’s canopy shells and paint. The previous warranty of three years has been extended to four, giving customers an even longer guarantee on the canopy products. Aeroklas states it was the first company in the world to offer Engineered ABS Double Shell Canopies to customers. It explains these canopies are rated as having a higher impact resistance than standard canopy designs and can reshape after impact. The inner and outer shells are moulded together to double the strength and durability of a single-skinned canopy for extra safety and peace of mind. Each shell is manufactured through a process of thermoforming and crafted from a single piece of ABS – acrylonitrile butadiene styrene – to eliminate any joins and the weaknesses associated with this. During product development, pendulum testing of up to 200kgs was carried out, with Aeroklas reporting there was no structural damage to the shell. Aeroklas says the high performance of these canopies has given its team a high level of confidence in the product line. For more information, visit www.aeroklasaustralia.com.au

This article is from: