1500 °C Max Tube Furnace With Complete Accessories

R

O

1500 C MAX TUBE FURNACE WITH COMPLETE ACCESSORIES MODEL NO. - ACM-FT-72105

R

1500OC MAX TUBE FURNACE WITH COMPLETE ACCESSORIES 1500째C Max Tube Furnace (50mm OD) with Sliding Flanges for Fast Heating/Cooling is a CE certified slide-able tube furnace with mullite and quartz tubes. The working temperature is up to 1400 0C. One pair of sliding rail is installed on bottom of furnace.

The furnace can move manually from one side to achieve fast heating and cooling. For the fastest heating, you can insert processing mullite tube into pre-heated furnace at desired temperature. For the fast cooling, you can move the tube from hot furnace with forced air cooling. The heating and cooling rate can be much higher under vacuum or inert gases. It is ideal furnace for rapid thermal processing at lowest cost.

This furnace has a double layer steel structure with dual air cooling fans. One sliding flange is installed on right side furnace, which can move processing tube in & out easily.

Vacuum flanges can reach 10E-5 torr by molecular pump or 10E-3 torr by mechanical pump. The flange has a 1/4" diameter thermal couple built in for monitoring real time temperature inside tube. Digital vacuum gauge is installed the flange. RS485 port is installed and ready to connect PC. Temperature controller & Meter PID automatic control via PMW Solid relay with 30 segment programmable & Over-heated protection.

Two S type thermal couples are included. One is built in furnace to control furnace temperature, and another inserted into tube to monitor sample real temperature profile.

MTI PC software and interface is included to allow you control and monitor temperature profile of the furnace by PC.

Stainless steel vacuum flanges are installed on both of end tube with water cooling jacket and heavy duty support. Limited by vacuum pump: 10-2 torr can be achieved by mechanical pump whereas 10-4 torr can be reached by molecular pump.

TECHNOCRACY PVT. LTD.

R

SALIENT FEATURES Ÿ Top quality SiC heating elements are used in these furnaces.

Ÿ Temperature control unit can be separated from furnace, and make moving

at easy. Its PID automatic control via current limiting phase angle fired the resistor, e.g. SCR (Silicon Controlled Rectifier). Ÿ It has a Power control with 30 segments programmable.

Ÿ High quality Ni-Cr-Al resistance wire serves as heating element and can be

heated up to 1200oC. This furnace has a Built in protection for over-heated and broken Thermal couple. Ÿ Heating Max. Temperature is 1500°C and Continuous Temperature is

1400°C. Max. Heating & Cooling Rate heating and cooling rate depend on working temperature.

TECHNOCRACY PVT. LTD.

R

TECHNICAL SPECIFICATIONS Furnace structure

Double layer steel structure with dual air cooling fans One sliding flange is installed on right side furnace, which can move processing tube in & out easily.

Vacuum flanges can reach 10E-5 torr by molecular pump or 10E-3 torr by mechanical pump. The flange has a 1/4" dia. thermal couple built in for monitoring real time temperature inside tube.

Digital vacuum gauge is installed the flange RS485 port is installed and ready to connect PC

Power

KW

2.5 ( 30A breaker required)

Voltage

V

AC 208-240V Single Phase, 50/60 Hz

Max. Temperature

o

1500

Continuous Temp.

o

C

1400

Heating Elements

-

SiC rod (1500C grade) , 4 pcs

Processing Tube Size (One mullite tube

mm

High quality mullite tube made in USA

C

and one quartz tube are included in the standard package)

Size: OD: 50mm x ID 44mm x 304.8mm L High quality one end closed quartz tube Size: OD: 50mm x ID 44mm x 304.8mm L

Heating Zone length

mm

6" (152 mm)

Constant temp. zone

mm

100 (+/-1oC) @ 800 - 1500 oC

Temp. controller & Meter

PID automatic control via PMW Solid relay with 30 segment programmable & Over-heated protection.

Two S type thermal couples are included. One is built in

TECHNOCRACY PVT. LTD.

R

TECHNICAL SPECIFICATIONS furnace to control furnace temperature, and another inserted into tube to monitor sample real temperature profile MTI PC software and interface is included to allow you control and monitor temperature profile of the furnace by PC (click here to review detail information) Temperature Accuracy

째C

+/ - 1 One stainless steel flanges with 1/4"dia fitting for inseat

Vacuum Seal& Digital Vacuum Gauge

thermal couple is included One digital vacuum gauge and valves are included for immediate use.

Vacuum Level

torr

limited by pump. ( pump is not included ) 10E-5 torr can be reached by molecular pump 10E-2 torr by mechanical pump.

Sliding Flange

Double sliding rail made by Cr plated steel Sliding length : 350 mm

Dimension

mm

400 x 304.8 x 530 mm (15.7" x 12" x 21")

Net Weight

Kg

about 45 60x45x35

Shipping package after crating Shipping weight Warranty

lbs

150 One year limited warranty (Consumable parts such as processing tubes, o-rings and heating elements are not covered by the warranty, please order the replacement at related products below).

TECHNOCRACY PVT. LTD.

An ISO 9001 : 2208 | ISO 14001 : 2008 | ISO 13485 WHO: GMP Products | GLP Compliant Products

www.acmasindia.com | www.cleanroom-equipments.com | www.lab-furnaces.com

TECHNOCRACY PVT. LTD. SALES OFFICE (INDIA) Office no. 506 & 507, 5th Floor, Plot no.- C-9, Pearls Best Height-II, Netaji Subhash Place, Pitam Pura, Delhi- 110034 Land Line No.: +91 - 11- 47619688, Fax: +91-11-47619788 E-mail.: info@acmasindia.com

SALES OFFICE (HONG KONG) Unit D 28 11/F Wing Tat Comm,Bidg 97, Bonham Strand East, Sheung Wan, Hong Kong (PRC) Tel.: 0086-13929598046 0086- 18922303099 E-mail.: hk@acmasindia.com

SHOWROOM J-284 Sector 1 Bawana Industrial Estate, Bawana, Delhi, INDIA-110039 Tel.: 0091-0-9312219738 (M) +91- 9717741167 E-mail.: info@acmasindia.com

SALES OFFICE (RUSSIA) Inmed Trade Street Ozerkovsky Embankment, Unit No 50, Straine- 1, Off- 502, Moscow, Russia E-mail.: info@acmasindia.com Tel.: 0049- 79592345 | Email: russia@acmasindia.com