Five Zones Split Tube Furnace With 80 MM

R

FIVE ZONES SPLIT TUBE FURNACE WITH 80 MM MODEL NO. - ACM-FT-72505

R

FIVE ZONE SPLIT TUBE FURNACE WITH 80MM Five Zones Split Tube Furnace is a CE certified split 80mm OD (3" I.D) Five-zone tube furnace which can achieve faster heating up to 1200oC and create smooth thermal gradient or one uniform constant temperature zone by adjust four zone temperature. The furnace includes one 80 mm O.D x 1400mm L fused quartz tube, one pair of vacuum sealing flanges with pressure gauge & ball valve for immediate use.

Microprocessor-based self-tuning PID control provides excellent control without overshooting and +/- 1 o C accuracy. It is an excellent furnace for annealing, diffusing and sintering sample in various atmospheres. Thermo-couple, Power cord and quartz tube and stainless steel sealing flange with gauge/valve are included for immediate use.

Furnace structure Double layer steel case with two cooling fan, which ensure low surface temperature. Energy saving high purity fibrous alumina insulation.

Digital programmable control is provided with 30 segments per program. The controller also includes RS232 communications. The furnaces that use this control also utilize a mechanical Over Temperature Protection relay. Temperature control unit can be separated from furnace, and make moving at easy. Its PID automatic control via current limiting phase angle fired the resistor, e.g. SCR (Silicon Controlled Rectifier). It has a Power control with 30 segments programmable. High quality Ni-Cr-Al resistance wire serves as heating element and can be heated up to 1200oC. This furnace has a Built in protection for over-heated and broken Thermal couple.

Two fibrous ceramic tube blocks are included for blocking heat radiation from inside tube.

Ceramic blocks must be fully inserted into the furnace chamber before heating. Quartz

TECHNOCRACY PVT. LTD.

R

block (Optional) is ideal for more cleanness and higher achievable vacuum. In order to increase the throughput and achieve high vacuum, you may replace the standard barbed hose fitting with the KF25 adapter, please click underline to order. For supplying high pressure gas, you may replace the standard barbed hose fitting with the VCR Face Seal Fitting, Five heating zones are provided with Five Digital Controllers, and each has 30segement.

SALIENT FEATURES Ÿ K type thermal couple. Ÿ Built in protection from over-heated and broken thermo couple. Ÿ Top quality SiC heating elements are used in these furnaces. Ÿ Max. Temperature is 1200 °C Ÿ Continuous Temperature is 1100 o C. Max. Heating Rate is <= 20 oC /min

TECHNOCRACY PVT. LTD.

R

TECHNICAL SPECIFICATIONS Fused quartz tube size

Double layer steel case with two cooling fan, which ensure low surface temperature.Energy saving high purity fibrous alumina insulation.

Power

8 KW

Voltage

AC 208-240V Single Phase, 50/60 Hz (40A breaker required) Powder cord is included without plug

Max. Temperature

1200 oC

Continuous Temperature

1100 oC

Max. Heating Rate

<= 20 oC /min

Tube Size and Flange

Standard: 80 mm O.D x 74 mm ID. x 1400mm L fused quartz tube included; Optionals: 4", 5" diameter tube is available upon request at extra cost; Two fiberous ceramic tube blocks are included for blocking heat radiation from inside tube.

Quartz block is ideal for more cleaness and higher achievable vacuum.

Fitting Ports

In order to increase the throughput and achieve high vacuum, you may replace the standard barbed hose fitting with the KF25 adapter, please click underline to order.

For supplying high pressure gas, you may replace the standard barbed hose fitting with the VCR Face Seal Fitting, please click underline to order.

TECHNOCRACY PVT. LTD.

R

TECHNICAL SPECIFICATIONS Heating Zone Length

Five heating zones: Zone1: 152 mm Zone2: 152 mm Zone3: 152 mm Zone4: 152 mm Zone5: 152 mm Total heating zone length: 811 mm, 32" in total)

Temperature Controllers

Five Digital Controllers, and each has 30-segement Built in protection from over-heated and broken thermo couple Five K type thermal couple Optional: you may order 5 sets of software & PC interface at the link below to achieve computer control at extra cost

Temperature Accuracy

+/ - 1 oC

Heating Element

Fe-Cr-Al Alloy doped by Mo

Dimension

1100 X 450 x 670mm

Net Weight

about 85 Kg

Warranty & certificate

One year limited warranty for electrical parts. CE Certified

Shipping package size after crating

65x45x35"

Shipping weight

250 Lbs

Optionals

You may choose different diameter of working tube at 40 mm or 50 mm at same cost

TECHNOCRACY PVT. LTD.

An ISO 9001 : 2208 | ISO 14001 : 2008 | ISO 13485 WHO: GMP Products | GLP Compliant Products

www.acmasindia.com | www.cleanroom-equipments.com | www.lab-furnaces.com

TECHNOCRACY PVT. LTD. SALES OFFICE (INDIA) Office no. 506 & 507, 5th Floor, Plot no.- C-9, Pearls Best Height-II, Netaji Subhash Place, Pitam Pura, Delhi- 110034 Land Line No.: +91 - 11- 47619688, Fax: +91-11-47619788 E-mail.: info@acmasindia.com

SALES OFFICE (HONG KONG) Unit D 28 11/F Wing Tat Comm,Bidg 97, Bonham Strand East, Sheung Wan, Hong Kong (PRC) Tel.: 0086-13929598046 0086- 18922303099 E-mail.: hk@acmasindia.com

SHOWROOM J-284 Sector 1 Bawana Industrial Estate, Bawana, Delhi, INDIA-110039 Tel.: 0091-0-9312219738 (M) +91- 9717741167 E-mail.: info@acmasindia.com

SALES OFFICE (RUSSIA) Inmed Trade Street Ozerkovsky Embankment, Unit No 50, Straine- 1, Off- 502, Moscow, Russia E-mail.: info@acmasindia.com Tel.: 0049- 79592345 | Email: russia@acmasindia.com