BRINGING LIFE TO SOUND
Introduction Who are we? President & CEO
Manufacturing Complete in-house manufacturing
Engineering Progressive research
Sections
Design Acoustic measurement Predictive software
Multi-Level Support Technical workshops Turnkey systems
Products Rigging hardware
Line Arrays Line Source Technology Co-Linear Drive Module Y-Axis & T-21Sub Symmetrical Drive™ Technology SpekTrix Series Convertible Cardioid Metrix Series Project Energia
Monitors On stage M Series
Conventional Enclosures Versatility through choice SX Series Compact Enclosures Contractor Exclusive
Contact 24/7
TABLE OF CONTENTS
Adamson
Who are we?
Systems
Engineering
is
a
Canadian
manufacturing firm based 80 km outside of Toronto, Ontario. We develop and manufacture a complete line of innovative loudspeaker products for the professional touring and installation markets. Designed and constructed to exacting specifications, every stage of an Adamson loudspeaker
system
is
produced
entirely
in-house.
This meticulous craftsmanship and attention to detail shows how seriously we believe in our ideas. Adamson’s continued pursuit for sonic excellence has led to a number of important patents published in key loudspeaker technologies. From those patented principles emerged complex sound chambers, highly engineered drivers, and innovative rigging and cabinet designs, setting new standards throughout the world. Our continued success in bringing significant, leading edge technology to the end-user, has associated the Adamson brand name with excellence and distinction.
INTRODUCTION
In
1983,
Brock
Adamson
began
creating
sound
reinforcement systems that would open the ears and eyes of audio engineers and designers around the world. He envisioned a method of reproducing sound which, even at extremely high levels, would retain the integrity of the original waveform and preserve the subtleties of symmetry, coherency and intelligibility – nuances most often lost in translation. Brock Adamson‘s passion for sound has driven the evolution of Adamson Systems Engineering from a small speaker shop to a company invested in its own factory, with a broad engineering base and a wide range of computer controlled manufacturing technology. Today Adamson is recognized as one of the most progressive manufacturers of loudspeaker systems in the industry. Brock Adamson currently continues to spearhead the design team at Adamson’s Research Laboratories, while simultaneously planning the expansion of our manufacturing facilities and implementation of PLC controlled robotic automation and high-tech CNC machinery.
President & CEO
Brock Adamson
Complete
in-house manufacturing
Factory From raw material fabrication to the finished product, Adamson is one of the industries only manufacturing firms to take true advantage of industrial materials and the industrial machinery to process them.
We do not
rely on the same components that most manufacturers are limited to.
We rapid prototype, and advance our
technology, without the stress or limitations of outsourcing. It’s all built at home in Canada. When others are moving to produce cabinets or entire systems off shore, we strive to move technology forward, with the quality and integrity that is expected in the professional audio industry.
MANUFACTURING
The Machine Shop By utilizing the latest in industrial CNC (Computer Numerical
Control)
technology,
Adamson
produces
precision machined parts, motor assemblies, rigging systems, punched steel and custom tooling, all with the industry’s most stringent tolerances. The result… Control and consistency, that is second to none.
The Transducer Shop Adamson offers a complete range of the industry’s most efficient and durable, mid range compression and low frequency transducers. As the pioneers of Kevlar cone technology, we produce a lighter stiffer diaphragm, with superior transient response and no fatigue over time. Unlike other composite materials, Kevlar boasts a beautiful balance of internal loss and mid range efficiency. Other materials do not share this balance and either over damp and reduce the efficiency (ie: paper), or under damp and ring (ie: Carbon Fiber). Our unique Cones eliminate the resonance and ringing in the passband, while delivering smooth controlled midrange, with unrivaled output. Recently our Research Laboratories have made significant advancements in specialized Kevlar cone geometries and introduced Adamson’s Advanced Cone Architecture. Our breakthrough geometries have proven to raise the frequency of radial cone modes and increase the linearized passpand in our LF components, a huge benefit in two way cabinet design.
From the world’s
most powerful subwoofer, to the most efficient mid range systems, Adamson’s Transducer Technology is a cut above.
The Cabinet Shop All of our rugged 11ply, 5/8” Baltic Birch cabinets are CNC cut precisely to spec. A team of highly skilled cabinet makers hand-finish every enclosure, before an immaculate roadworthy coating is applied.
Progressive
research
ENGINEERING
Our team of engineers utilize the most sophisticated 2D and 3D drafting tools, as well as FEA (Finite Element Analysis) and BEA (Boundary Element Analysis) technology, to fully envision our concepts. Stress analysis on rigging systems, simulation of modal behavior on Kevlar diaphragms and the study of acoustic particle motion in waveguides and wave shaping sound chambers, are all analyzed in our laboratories, so our R&D department can execute and deliver the most progressive loudspeaker systems available.
Acoustic We
conduct
measurement extensive
measurements
throughout
our prototype and design processes. KLIPPEL, MLSSA, Clio, WinMLS, PACsys and Vacs, are just a few of the measurement tools used to gather and analyze data on transducers, as well as finished systems.
PACsys FEA/Bem Analysis
All of our published power ratings follow the AES (Audio Engineering Society) standard. Sensitivity is measured with 2.83V and taken at 1m, providing consistent and accurate data that is simple to understand and evaluate. (some measurements are taken at 3 meters and scaled accordingly) AES power ratings are measured with a Pink Noise signal extending one decade above the driver’s lowest operating
WinMLS measurement
frequency. This rating is the average RMS power, long term, with a 6dB crest factor. (Peaks are 6dB higher than the AES rating) Our Program Power rating is the suggested continuous power of each amplifier channel. The driver can be continuously driven to the amplifiers maximum output using music as program, without failure.
KLIPPEL measurement
DESIGN
Predictive
Shooter® Adamson Shooter® Software is one of the most advanced and robust array modeling and configuration software packages available. This complete simulation package takes full advantage of our sophisticated measurement processes, providing real acoustic plots, taken from valid acoustic measurements - not just theoretical numbers. Unlike other “line array calculators”, the Shooter® package offers 2D Vertical and Horizontal views, with complete 3D SPL calculation. This makes it easy to edit venue geometries, add multiple levels to a design and evaluate accurate SPL coverage/distribution data, while a Mechanical View and a Rigging Plot window display precise rigging points and load information. Even when you’re tight for time, Shooter® will deliver, period. So we ask the question… Do you want the precision and control of real acoustic measurement at your fingertips, or just a basic calculator that simply cannot address the complexities raised by modern array design?
software
Technical
workshops
In-depth technical training workshops for end-users and operators are available at Adamson Headquarters and throughout the world. These workshops are tailored to your company’s specific needs. From safe and efficient rigging procedures to strategies for troubleshooting, fine-tuning and optimizing array design, we give you the knowledge to take full advantage of the many benefits that our high performance systems and software tools offer.
MULTI-LEVEL SUPPORT
Turnkey
Adamson provides comprehensive turnkey system solutions. Whether you need sound design assistance, rigging development, or a complete amplification and processing package, we’re dedicated to seeing your project achieve success. As an Adamson partner, one needs to assure uniform performance, packaging and cabling configurations, and maintain an acceptable level of technical expertise. This ensures performance and also maintains consistency world-wide, allowing cross-rental or dry-hire with peace of mind. Adamson Engineers, in cooperation with our partners, have developed specific performance characteristics that are the signature of our product. Custom built turnkey packages include Lab.gruppen amplifiers, Adamson M and DX Series processing, XTA or LAKE processing, UL/ULC approved breaker protected AC distribution with twistlock or alternate connectors, A.I.D. (Adamson Integrated Distribution) panels with Socapex or NL8 connectors in both touring and install versions. Shock mounted racks with slide away doors protect the equipment, maintaining a small footprint for easy truckpacks, while eliminating the need to store lids. European standard racks pictured
systems
Photo by: Fabrice Lachaze Photo by: Fabrice Lachaze
Rigging
hardware
AIR™ System
The AIR™ (Adamson Integrated Rigging) system introduces a captive rigging concept that requires no extra hardware and is so simple to use that a single person can set up an entire array. Both the revolving disk (US Patent # 7,328,274) and spring loaded rigging elements of the AIR™ system retract completely into the cabinet when not in use and saves valuable time and money in labour and set-up. When arrayed AIR™ hardware is completely discreet giving a clean and unobtrusive look. The AIR™ system allows 6 various rigging angles between each enclosure, measured in the logarithmic scale and comes standard with the SpekTrix Series, T-21 Sub, and the Metrix-t Series. (Note: The AIR™ system in the Metrix Sub-t is not spring loaded.)
Slide-Hinge Rigging
Adamson’s Slide-Hinge Rigging System gets the Y-Axis Line out of the truck and into the air quickly and easily. The Y10 system features six one-degree increments, while the Y18 offers 11 half-degree increments, allowing precise angular positioning by adjusting the extension of the sliding hinge. It connects at the rear of each cabinet to the next rigging point using ball lock pins, for safe and efficient assembly. Adamson’s SlideHinge rigging system provides solid suspension for larger scale Y-Axis arrays, and transition kits are available to allow for combining cabinets from both the Y-Axis and SpekTrix series, extending system flexibility and offering completely scalable line array solutions.
PRODUCTS
EIR™ System Metrix-i introduces the EIR™ ‘Enclosed Installation Rigging’ system, which is a lightweight solution, designed to save money on permanent installations. The Metrix Install Adapter Plate is available when flying the Metrix Sub-t in the same array with the Metrix-i or Metrix Wave -i enclosures. The EIR™ plates function in a similar manner as the AIR™ rigging wheel. Each of the 6 positions are on a logarhitmic scale (settings 0 to 5). Four screws fasten an EIR™ plate between 2 enclosures on each side. Adamson has also adapted the EIR™ system as an option for the SpekTrix system.
MASS™ System MASS™ (Multi Angle Suspension System)
features
several
different methods of flying M15 cabinets. MASS™ is designed for a single or a pair of M15’s. The M15 is designed to accept a ‘multipurpose rigging plate’, which is the base for the following rigging methods: Pole mount, Fly track, C-clamp, and Single Axis & Dual Axis for a single or a pair of M15’s. MASS™ is perfect for installations or touring
applications
and
available by special request.
is
Line Source technology
Adamson Line Arrays offer the best possible solutions to the complex questions of line array geometry. Sound chambers, waveguides, driver size and box angle are all critically optimized in the integration process of array design. Each of these components plays a significant role in the outcome. Today Adamson offers various sizes of line arrays: Large and Medium sized Y-Axis Series with the flyable subwoofer extension T-21 Sub to the compact sized SpekTrix Series – and the Ultra Compact Metrix Series.
LINE ARRAYS
Brock Adamson’s patented Co-Linear Drive Module, is a Co-entrant Mid/High device, comprised of a high frequency sound chamber, inside a mid frequency sound
chamber.
The
9”
Adamson
midrange
compression driver fires into a concentric slotted phase plug. The conversion of the concentric rings to vertical slots in the midrange results in a flat wavefront. The 4” high frequency compression driver mounts coaxially to the back plate of the mid and fires energy through the pole piece of the mid and into a separate high frequency chamber. The high chamber offers a series of cells that adjust both the path length and the vector of the energy within the wavefront at the exit. This reduces the curvature of the wavefront and ensures that all acoustic particle movement within the wavefront, is normal to the wavefront. This means that in the resulting hyper-directional horn loaded mid/ high system, the wavefront structure of the individual elements conforms closely to the shape of the overall array wavefront. There is very little of the scattered energy that causes vertical interference in other designs. US Patent #6,343,133 and US Patent #6,581,719 The drive module has three slots at the exit. The centre slot is energized with high frequency pressure and is then flanked by two slots energized with mid frequency pressure. With such close spacing and patented processing techniques, the chamber virtually eliminates time smear and mid lobing. US Patent #6,628,796.
Co-Linear Drive
Module
Y-Axis
Series
Photo by: Jimi Giannatti
Physical Data Dimensions & Weight
Height (cm)
10.5” (26.7)
Width (cm)
42.75” (108.6)
Depth (cm)
16.5” (62.3)
Weight (Kg)
126lbs (57.2)
Dolly (Kg) Attributes
35lbs (15.9)
Trapezoidal Enclosure
Rugged 5/8”, 11 Ply Baltic Birch Cabinet
Wood Finish: Textured Water Borne Acrylic
14 Gauge Cold Rolled Steel Grille
Metal Finish: Polyester Sandtex™ Powder Accessories & Options
Black Compact / Standard / Large Aluminum
Rigging Frame, Waterproof Soft Covers,
Underhang Kit for Y18 & SpekTrix, Aluminum Dolly
Y10
Technical Data
The Y10 line source system is the compact, mid-sized,
Frequency Response
member of the Y-Axis family. But don’t be fooled by its
Full Range Preset 60Hz - 18kHz Frequency Range
discreet size. The Y10 packs a serious punch, as the heart of the system is the Adamson mid/high Co-Linear Drive Module, loaded with a single YX9 midrange compression driver and a 4” diaphragm high frequency compression
(+/-3dB)
Xover Preset Maximum SPL
90Hz - 18kHz (Continuous / Peak)
133.6dB / 139.6dB
Xover Preset
Full Range Preset 133.8dB / 139.8dB System Type
driver. The mid/high section of the Y10 is flanked by
3 Way Active Directivity & Connection Type
two Adamson low mass ND10-L, 10” Kevlar, Neodymium
drivers.
(Prolate-Spheroidal Sound
Chamber)
Drivers
Neutrik Speakon™ NL8 (Nominal Impedance)
LF (x2)
ND10-L 10” Kevlar
Neodymium 2 x 16Ω (8Ω)
applications. To ensure complete compatibility, the Y10
MF
YX9 9” Kevlar Ferrite
and Y18 use a universal rigging design. When the Y10
(8Ω)
HF
JBL2451 4” - 1.5” Exit
This versatile workhorse can be deployed as a powerful main system, or a complement to the Y18, in down fill
is flown as a down fill to the Y18, the combination is the industry’s only seamless mid/high transition. Both Y10 and Y18 cabinets utilize Adamson’s Co-Linear sound chamber
Vert. x Hor.
5° x 100°@-6dB, 90°@-3dB
Neodymium Compression
Power Handling
Driver (8Ω) (AES / Program / Peak)
LF (x2)
300 / 600 / 1200
and are identical from 250 Hz, to their highest operating
MF
350 / 700 / 1400
frequency.
HF Sensitivity
150 / 300 / 600 (2.83V@1m)
LF
97.1dB
Therefore the wavefront of an array combining both Y18
MF
102.1dB
and Y10, is uninterrupted by gaps or awkward and bulky
HF Processing
110.1dB
rigging systems. They produce an astonishing, seamless
XTA & LAKE & PLM
blanket of smooth mid/high frequency energy throughout the defined coverage area.
Presets
Physical Data Dimensions & Weight
Height (cm)
18.375” (46.7)
Width (cm)
57.75” (146.6)
Depth (cm)
26.5” (62.3)
Weight (Kg)
270lbs (122.7)
Dolly (Kg) Attributes
35lbs (15.9)
Trapezoidal Enclosure
Rugged 5/8”, 11 Ply Baltic Birch Cabinet
Wood Finish: Textured Water Borne Acrylic
14 Gauge Cold Rolled Steel Grille
Metal Finish: Polyester Sandtex™ Powder Accessories & Options
Black Standard / Large Aluminum Rigging Frame
Waterproof Soft Covers, Underhang Kit for Y10 &
SpekTrix, Aluminum Dolly
Y18
Technical Data
The first and most powerful line source system in the Adamson family was introduced as an answer to the growing demand for higher SPL over greater distances. The system caters primarily to touring and festival work, but can be found on installations that require extremely high SPL. This 3-way cabinet employs two Adamson mid/high CoLinear Drive Modules and like the Y10, the drive module and trapezoidal cabinet design create a uniform, slightly curved seamless wavefront of mid/high energy, while the lows are enforced with two Adamson AW18, 18” Kevlar drivers.
Frequency Response
(+/-3dB)
Full Range Preset Frequency Range
40Hz to 18kHz
Xover Preset Maximum SPL
70Hz to 18kHz (Continuous / Peak)
138.5dB / 144.5dB
Xover Preset
Full Range Preset 138dB / 144dB System Type 3 Way Active Directivity & Connection Type
Vert.x Hor.
5° x 100°@-6dB, 90°@-3dB
(Prolate-Spheroidal Sound
Chamber)
Drivers
Neutrik Speakon™ NL8 (Nominal Impedance)
LF (x2)
AW18 18” Kevlar Ferrite
2 x 8Ω (4Ω)
MF (x2)
YX9 9” Kevlar Ferrite
This LF design provides rock solid performance that no
2 x 8Ω (4Ω)
HF (x2)
JBL2451 1.5” Exit
other system can duplicate. And with the most efficient
Neodymium Compression
midrange system in the industry, the Y-Axis offers headroom
Power Handling
Driver 2 x 8Ω (4Ω) (AES / Program / Peak)
that is unfathomable. When other arrays have reached
LF (x2)
600 / 1200 / 2400
their limit and begin to break up, the Y18 is a brick wall
MF (x2)
350 / 700 / 1400
that just won’t shudder. And then you turn on the T21…
HF (x2) Sensitivity
150 / 300 / 600 (2.83V@1m)
LF
102.1dB
MF
108.1dB
HF Processing
114.1dB
XTA & LAKE & PLM
Presets
Symmetrical Drive™ technology
T21 Sub
Physical Data
Adamson has re-set the bar with a new generation of low frequency
Dimensions & Weight
technology. The T21’s performance is almost impossible to believe
Height (cm)
23” (58.42)
when you read the specifications, but when you turn it on you can
Width (cm)
57.63” (146.38)
Depth (cm)
38.31” (97.31)
Weight (Kg)
309lbs (140)
feel that there is something special happening. And it is unlike anything that you have experienced in the past.
Attributes
Rugged 5/8”, 11 Ply Baltic Birch Cabinet
But there is no magic involved, just the advanced cabinet design
Wood Finish: Textured Water Borne Acrylic
coupled with a pair of the most sophisticated low frequency
14 Gauge Cold Rolled Steel Grille
transducers available; Brock Adamson’s own, SD-21 (Symmetrical
Metal Finish: Polyester Sandtex™ Powder Accessories & Options
Drive™), 6” dual coil, 3000 watt, Kevlar woofers. Unlike other dual
Black Aluminum Heavy Duty Rigging Frame
AIR™ System Rigging Hardware, Custom
Waterproof Soft Cover
coil drives, the SD-21 has a balanced spider suspension, with spiders at both ends of the coil assembly, resulting in extreme
Technical Data
stability under high excursions. The air movement generated by the spiders helps to cool the coil while “fins” draw the heat away
Frequency Response
from the coil, lowering operating temperature and improving power
compression.
Frequency Range
With 15mm of linear xmax, 6000 watts of power and a cabinet designed to manage extreme air movement, the T21 is a true powerhouse. Engineers and designers around the world are raving about it.
“Adamson Y10’s and Y18’s, in addition to the T21 Sub, create a complete package. I feel like I’m a salesman for this PA, but I’m really excited about it because of how good it is. The efficiency of the T21 sub is unlike any other sub.” Kenneth “Pooch” Van Druten, FOH Engineer: Linkin Park, KISS, Kid Rock
“When you get in path of the T-21 Subs, the difference is incredible. I love them.” Harley Zinker, FOH Engineer: Interpol, The Strokes
“I read the specs, then I used the box. The T21 sounds even better than it looks on paper. This box is a must have for any rock show!” James McCullagh, FOH Engineer: INXS, The Libertines
“The Y10 with T-21 is the best active four-way I have ever used.” Scott Willsallen, Sound Designer and Consultant - Eurovision 2006, Asian Games 2006, National Day Parade Singapore 2007, World Youth Day Sydney 2008.
-10dB Single Unit 36Hz - 193Hz
With Y18 (Y10) Preset
Maximum SPL
30Hz - 70Hz (90Hz) (Continuous / Peak)
With Preset Connection Type
140.5dB / 146.5dB
Drivers
Neutrik Speakon™ NL8 (Nominal Impedance)
SD-21 - 21” Kevlar
LF (x2)
Power Handling
Neodymium 2 x 2 Ω (AES / Program / Peak)
(30 - 300Hz)
LF (x2) Sensitivity
1500 / 3000 / 6000 (2.83V@1m)
LF Processing
113.7 dB / 25Hz - 100Hz
XTA & LAKE & PLM
Presets
SpekTrix
Series
Physical Data
SpekTrix
SpekTrix & SpekTrix W
Dimensions & Weight
SpekTrix
Height (cm)
8.6” (22) / 10.4” (26.4)
/ SpekTrix W
Width (cm)
27.9” (71) / 27.9” (71)
Depth (cm)
18.9” (48) / 18.9” (48)
Weight (Kg) Attributes
62lbs (28) / 64lbs (29)
Rugged 5/8”, 11Ply Baltic Birch Cabinet
Wood Finish: Textured Water Borne Acrylic
14 Gauge Cold Rolled Steel Grille
Metal Finish: Polyester Sandtex™ Powder Accessories & Options
Black Aluminum Rigging Frame with a single
movable pick point / dual pick points,
patented wave shaping sound chamber technology (US
AIR™/ EIR™ Systems, Regular / Extended
Patent #6,581,719). Both the 5 degree SpekTrix and the
Stacking Plates, Custom Flightcase, Aluminum
Dolly, Waterproof Soft Covers
SpekTrix offers all the benefits of a true line source via
15 degree SpekTrix W (Wide Angle Vertical Enclosure) are
Technical Data
three-way enclosures exhibiting extremely high output for their compact size.
Frequency Response
The sound chamber in the heart of the SpekTrix is similar to the inner (high frequency) body of the Y-Axis drive module. It produces a slightly curved wave front in the HF that is comparable to the wavefront found in the Y-Axis.
(+/-3dB)
Full Range Preset 80Hz - 18kHz
With Sub Frequency Range
35Hz - 18kHz
Xover Preset Maximum SPL
110Hz - 18kHz (Continuous / Peak)
130.1dB / 136.1dB
Xover Preset
Full Range Preset 129.8dB / 135.8dB System Type
The 15 degree SpekTrix W allows for extreme downward angles at the bottom of the array – ensuring optimal
3 Way Active Directivity & Connection Type Vert. x Hor.
SpekTrix 5° /
vertical coverage array designs (for instance, in theatres
Drivers
Neutrik Speakon™ NL8 (Nominal Impedance)
with multiple balconies). Both enclosures feature unique
LF
ND8-L 8.5” Kevlar
8.5” Adamson Kevlar, neodymium drivers – one ND8-L
Neodymium (8Ω)
MF
ND8-M 8.5” Kevlar
coverage in the front rows – and is perfect for use in wide
LF and one ND8-M MF - and one 3” diaphragm high frequency compression driver. The SpekTrix and SpekTrix W feature the patented AIR™ revolving disk flying hardware, while the SpekTrix rigging frame is equipped with a single
threaded
moving pick point, so the centre of balance
and
tilt
angle can be precisely adjusted with little effort.
SpekTrix W
SpekTrix W 15° x 120°
Neodymium (8Ω)
HF
B&C DE900 3” - 1.4”
Neodymium Compression
Power Handling
Driver (8Ω) (AES / Program / Peak)
LF
250 / 500 / 1000
MF
250 / 500 / 1000
HF Sensitivity
80 / 160 / 320 (2.83V@1m)
LF
92.6dB / 80Hz - 250Hz
MF
97.1dB / 250Hz - 900Hz
HF Processing
110.1dB / 900Hz - 18kHz
XTA & LAKE & PLM
Presets
Convertible
Cardioid
Physical Data Dimensions & Weight
Height (cm)
23” (58.5)
Width (cm)
28” (64)
Depth (cm)
32” (84)
Weight (Kg) Attributes
170 lbs (77)
Internally Braced Rectangular Enclosure
Rugged 5/8”, 11 Ply Baltic Birch Cabinet
Wood Finish: Textured Water Borne Acrylic
14 Gauge Cold Rolled Steel Grille
Metal Finish: Polyester Sandtex™ Powder Accessories & Options
Black Aluminum Rigging Frame with a single
movable pick point / dual pick points,
Spring Loaded AIR™System,
Aluminum Dolly, Waterproof Soft Covers
Technical Data
SpekTrix Sub The compact companion Sub to the SpekTrix is the first Adamson enclosure to introduce Convertible Cardioid Technology. This dual Kevlar 18” manifold can be arrayed conventionally (all facing the same way), or it
Frequency Response
(+/-3dB)
Full Range Preset
40Hz - 160Hz
Frequency Range
Xover Preset
35Hz - 110Hz
Maximum SPL
(Continuous / Peak)
132dB / 138dB
Directivity & Connection Type
Convertible Cardioid
Neutrik Speakon™ NL8
2 Front & 2 Rear Connectors
there are four NL8 connectors; two on the front and two
Drivers
(Nominal Impedance)
on back of the cabinet.
LF (x2)
AW18 18” Kevlar Ferrite
2 x 8Ω (4Ω)
The precision-machined, spring-loaded rigging hardware
Power Handling
(AES / Program / Peak)
600 / 1200 / 2400
can be arrayed in back-to-front pairs for true cardioid performance. For ease of cabling in cardioid mode,
works in conjunction with other AIR™ system rigging
LF (x2)
elements, allowing a variety of configurations -attach
Sensitivity
(2.83V@1m)
the subs to the rigging frame and hang the SpekTrix
103.9dB
LF
underneath them, or stack your subs directly on the floor
Processing
and ground stack your array on top. The SpekTrix Sub
loads in pairs on an aluminum dolly board, with a soft cover option.
Presets
XTA & LAKE & PLM
Metrix
Series
Metrix & Metrix W Our
Multi-Purpose,
Ultra Compact Line Source
Series
was
designed for small to medium permanent Metrix-t
installations,
or
for
use as a main system in corporate and smaller touring applications. The rugged but discreet cabinet is also a handy solution for large format touring as a front fill, lip fill or out fill system. The 2-way design shares the same patented sound chamber technology found in the SpekTrix series. Unlike other ultra compact systems, the Metrix does not run out of steam when you put it to the test. The sound chamber is loaded with a 3” diaphragm HF compression driver giving it the raw horsepower that is simply unavailable in other cabinets of its class. Metrix ‘Symmetrical Adapter Plates’ are used to fly L and R arrays with mirrored waveguides for perfect symmetry. The HF sound chamber is paired with a high powered single Neodymium, Kevlar 8.5” low/mid driver. Metrix W-t
The Metrix toolbox also includes ‘Pole Mount Plates’, designed to handle a pair of Metrix W (Wide Angle Vertical Enclosure) mounted on the built-in pole mount socket in the Metrix Sub. The unique accessories make the Metrix series a scalable solution, even for smaller events where a full array Photo by: Fabrice Lachaze
is not needed.
Physical Data
Metrix Sub-t Dimensions & Weight
Metrix
/
Metrix W
/
Metrix Sub
Height Front (cm) 8.56” (21.7) / 10.31” (26.2) / 24.4” (62)
Width (cm)
21.25” (54) / 21.25” (54) / 21.25” (54)
Depth (cm)
16.5” (42) / 16.5” (42) / 28.875” (73.3)
Weight (Kg)
t - 53.5lbs (24.2) / 55.5lbs (25.1) / 129.5lbs (58.7)
Attributes
i - 43.5lbs (19.7) / 45.5lbs (20.6) / 117.5lbs (53.2)
Trapezoidal / Rectangular (Metrix Sub) Enclosure
Rugged 5/8”, 11 Ply Baltic Birch Cabinet
Wood Finish: Textured Water Borne Acrylic
14 Gauge Cold Rolled Steel Grille
Accessories & Options
Metal Finish: Polyester Sandtex™ Powder Black Aluminum Rigging Frame (-t), Black Steel Rigging Frame (-i), AIR™ / EIR™ Systems, Frame Link Adapter Plates,
Metrix Sub
Install Adapter Plates, Extended / Standard Stacking Plates, Symmetrical Adapter-t, Short & Tall Polemount-t, Custom Flight
This convertible cardioid Sub features two unique 15”
Case for -t Series, Wooden Dollies & Soft Covers for the Sub.
Kevlar Neodymium drivers, which take full advantage of Adamson’s Advanced Cone Architecture™. This proprietary
and
long
overdue
advancement
Technical Data Frequency Response
in
cone geometries creates a stiffer cone rim, while it
(+/-3dB)
Full Range Preset 95Hz - 18kHz
(Metrix & Metrix W, no Sub)
40Hz - 160 Hz
(Sub Only)
simultaneously eliminates radial modes in the driver’s
Frequency Range
35Hz - 18kHz
(Complete System)
passband. The reduction in distortion and breakup is
101Hz - 18kHz
(Metrix & Metrix W)
extraordinary.
Maximum SPL
35Hz - 111Hz (Continuous / Peak)
(Sub)
The driver’s unique design, loaded in a manifold with optimal
Xover Preset
Xover Preset (101Hz)
126.5dB / 132.5dB
(Metrix)
126.8dB / 132.8dB
(Metrix W)
System Type
130.4dB / 136.4dB
(Metrix Sub)
port tuning,
2 Way Active / 3 Way Active with Sub Directivity & Connection Type
maximizes
the output
Drivers
Neutrik Speakon™ NL8 (Metrix Sub - 2 front, 2 back) (Nominal Impedance)
(Metrix / Metrix W)
capability of this very compact enclosure. A Metrix ‘Frame Link Adapter’ can be used for flying subs behind the
Vert. x Hor.
Metrix 5° / Metrix W 15° x 120°
LMF
ND8-LM 8.5” Kevlar Neodymium Low/Mid (16Ω)
HF
B&C DE800 3” - 1.4” Exit Neodymium Compression Driver (16Ω)
(Metrix Sub)
ND15-S 15” Kevlar Neodymium 2 x 6Ω (3Ω)
LF (x2)
Power Handling
(AES / Program / Peak)
LMF
250 / 500 / 1000
main array when working
HF
110 / 220 / 440
(Metrix & Metrix W)
with limited trim heights.
LF (x2) Sensitivity
500 /1000 / 2000 (2.83V@1m)
(Metrix Sub)
L/MF
96.1dB
(Metrix & Metrix W)
HF
108.1dB
(Metrix & Metrix W)
LF Processing
102.6dB
(Metrix Sub)
XTA & LAKE & PLM & Adamson MSeries
Presets
(Metrix & Metrix W)
Project
Energia 3 Phases
The project was conceived after years of analyzing the inefficiencies found in Sound Re-enforcement and Performance Venue Optimization. In any given concert environment, you don’t have to look far before you find multiple software programs, running on a slew of laptops, awkward packaging, slow rigging systems, excessive truck space consumed by bulky amp racks and oversized loudspeaker systems. This is how we came to a very simple conclusion... integrate & consolidate. The key components of Energia, include a series of new loudspeaker systems, with networkable Class D amplifier modules, DSP, cable and power distribution, AVB network hardware with software integration of control, 3 dimensional simulation and diagnostics. To ensure the reliability and a smooth integration of the technology, there are 3 phases involved in the release of the first loudspeaker system in Project Energia.
MORE THAN A SIMPLE 3dB
digital signals, network control and 3-phase AC power. Phase 1 - Mechanical Field Testing
The E15 requires one cable for four enclosures.
Blueprint® Software: Design Tools The E15’s waveguide pattern provides 90 degrees of Phase 2 - Class D Amplifier, Power Distribution and
horizontal coverage (+/- 3dB), while vertical coverage is
Ground Control Field Testing
determined by the quantity of 6-degree cabinets utilized in any given array. Once the e-Capsule is then flanked
Phase 3 - Network and Network Hardware Field Testing
with two single 15” Baltic birch trapezoidal e-Enclosures.
Built-in controller & analyser with AVB Interactivity (Energia
The Birch enclosures provide the acoustical integrity and
Genus) Blueprint® Suite: Control & Design Software
natural warmth of a wooden cabinet, but since they are simply bolted onto the side of the e-Capsule, there is no
The Final Product
influence over the rigging alignment. The
Blueprint®
Software
Suite
provides
adaptive
The elegant build of each Adamson E15 cabinet begins
feedback and equalization, optimizing performance
with the provocative e-Capsule, precisely engineered
from venue to venue. Blueprint simulates, controls
and constructed, in lightweight Aluminum and Aircraft
and monitors your system, providing the fastest setups
Steel.
with educated feedback, allowing engineers to make
The patent pending e-Capsule is the heart of the E15
informed decisions in tough situations that are faced
system, housing mid/high components, waveguides,
day in and day out on the road.
amplification, network electronics and the Autolock™ rigging system which allows for 8 incremental positions and can handle 32 cabinets deep with an 8:1 safety factor. A single cable energizes the E15 with analog and
On
Stage
Photo by: Oliver Santos
M Series The Adamson M Series offers users a range of high powered stage monitors for a variety of demanding applications. The M12 is the most compact, while the M15 has proven to be a success as a lightweight, high horsepower monitor. Since its inception the M15 has found itself on an ever-growing number of technical riders worldwide. Both M15 and M12 can be ordered complete with an Active/Passive switchable crossover network, or in an active only version. The newest addition to the family, the M212 delivers all the characteristics of the Adamson M12 monitor but with the added benefit of low frequency extension, making the M212 the perfect solution where you require extended low end punch while maintaining the vocal clarity of a 12� wedge. The biggest and meanest member of the family is the extremely powerful M215. With all the fine sonic qualities of the M15, the M215 utilizes two 15� drivers rather than one, and takes advantage of the larger cavity volume to produce massive low end. The M215 is ideal for artists that insist on having big monitor rigs with substantial output. The impressive bass response also allows the M215 to act as a standalone drumfill.
MONITORS
Physical Data Dimensions & Weight
Height (cm)
13.5” (34.3)
Width (cm)
25.1” (63.8)
Depth (cm)
15.8” (40.1)
Weight (Kg)
42.5lbs (19.3)
Attributes
Symmetrical Trapezoid Enclosure
Rugged 5/8”, 11 ply Baltic Birch Cabinet
Wood Finish: Textured Water Borne Acrylic
14 Gauge Cold Rolled Steel Grille
Metal Finish: Polyester Sandtex™ Powder
Fiberglass Acoustic Waveguide
2 Crossover versions: the Switchable Active /
Passive (s), and the Active Only (a)
Accessories & Options
Custom Flightcase for a pair of M12 cabinets
Technical Data Frequency Response
(+/-3dB)
Full Range Preset Frequency Range
50Hz - 18kHz
M12
Xover Preset Maximum SPL
90Hz - 18kHz (Continuous)
The incredibly lightweight Adamson M12 monitor delivers
132.3dB (Active)
everything you need in a low profile stage monitor:
Monitor Preset System Type
131.1dB (Active)
Active/Passive
fantastic gain before feedback, precise pattern control and high output with extremely low distortion. Together, the symmetrical trapezoid design and the 65° conical waveguide, allow any two cabinets to operate as a mirrored pair. The M12 exhibits remarkably low distortion thanks to the qualities of its advanced multilayer Kevlar cone driver and Adamson’s proprietary Advanced Cone Architecture™.
Xover Preset
Switchable Directivity & Connection Type
Vert. x Hor.
65° x 65°
Drivers
Neutrik Speakon™ NL4 (Nominal Impedance)
LF
ND12 12” Kevlar
Neodymium (6Ω)
HF
B&C DE920TN 3” - 1.4” Exit
Neodymium Compression
Power Handling
Driver (8Ω) (AES / Program / Peak)
500 / 1000 / 2000
LF
Adamson’s first lightweight, 12” Kevlar Neodymium driver
HF Sensitivity
110 / 220 / 440 (2.83V@1m)
supplies exceptional power handling with outstanding
98.2dB
mid frequency response, ideal for demanding vocal
HF Processing
108.1dB
performance.
XTA & LAKE & Adamson
LF
Presets
MSeries
Physical Data Dimensions & Weight
Height (cm)
Width (cm)
28.5” (72.4)
Depth (cm)
16.9” (42.9)
Weight (Kg)
56lbs (25.4)
14” (35.6)
Attributes
Symmetrical Trapezoid Enclosure
Rugged 5/8” 11ply Baltic Birch Cabinet
Wood Finish: Textured Water Borne Acrylic
14 Gauge Cold Rolled Steel Grille
Metal Finish: Polyester Sandtex™ Powder
Fiberglass Acoustic Waveguide
Accessories & Options
MASS™ Rigging System, Custom Flightcase for
a pair of M15 Cabinets
Technical Data Frequency Response
(+/-3dB)
Full Range Preset 60Hz - 18kHz Frequency Range
M15 Loaded with our ND15-L driver and a 4” diaphragm compression driver, this wedge produces extremely high SPL.
The M15 is a first-class tool for demanding
applications. Featuring an extremely low profile, symmetrical trapezoid design with a 50° conical waveguide, the M15 allows any two cabinets to work together in a mirror image monitor configuration.
Xover Preset Maximum SPL
65Hz - 18kHz (Continuous)
Xover Preset
131.3dB
Monitor Preset
131.5dB (Active)
Monitor Preset System Type
129.5dB (Passive)
Active/Passive Switchable Directivity & Connection Type
Vert. x Hor.
50° x 50°
Drivers
Neutrik Speakon™ NL4 (Nominal Impedance)
LF
ND15-L 15” Kevlar
Neodymium (6Ω)
HF
B&C DE1000 4” - 1.5” Exit
Neodymium Compression
Power Handling
Driver (8Ω) (AES / Program / Peak)
500 / 1000 / 2000
LF
The breakthrough in our Advanced Cone Architecture™
HF Sensitivity
140 / 280 / 560 (2.83V@1m)
makes our ND15 driver the only 15” drivers with zero axial
98.9dB (60Hz - 800Hz)
modes in its entire pass band. This dramatically increases
HF Processing
108.5dB (800Hz - 18kHz)
the linearized mid-range response, while maintaining a
XTA & LAKE & Adamson
rock solid bottom end, something that is impossible to
achieve with a 15” paper driver. The M15 has unsurpassed output and less distortion than any monitor in its class.
LF
Presets
MSeries
Physical Data Dimensions & Weight
Height (cm)
15.8” (40.1)
Width (cm)
24.8” (63)
Depth (cm)
23” (58.4)
Weight (Kg)
72lbs (32.65)
Attributes
Symmetrical Trapezoid Enclosure
Rugged 5/8” 11ply Baltic Birch Cabinet
Wood Finish: Textured Water Borne Acrylic
14 Gauge Cold Rolled Steel Grille
Metal Finish: Polyester Sandtex™ Powder
Fiberglass Acoustic Waveguide
Accessories & Options
MASS™ Rigging System, Custom Flightcase for
a pair of M15 Cabinets
Technical Data Frequency Response
(+/-3dB)
Full Range Preset 50Hz - 18kHz Frequency Range
M212 The low-profile M212 consists of two multi-layer Kevlar
Xover Preset Maximum SPL
55Hz - 18kHz (Continuous)
138.3dB (Active)
Xover Preset
Monitor Preset System Type
137.1dB (Active)
12” cones that provide exceptional power handling
Active Directivity & Connection Type
with remarkably low distortion and phenomenal mid
frequency response, ideal for the most demanding vocal
Drivers
Neutrik Speakon™ NL4 (Nominal Impedance)
LF
ND12-L 12” Kevlar
Neodymium 2 x 6Ω (3Ω)
HF
B&C DE920TN 3” - 1.4” Exit
performances.
Again, Adamson’s Advanced Cone
Architecture ensures that cone modes in the passband are eliminated. The 65° conical waveguide design ensures that there is minimal turbulence with exceptionally low distortion.
Vert. x Hor.
65° x 65°
Neodymium Compression
Power Handling
Driver (8Ω) (AES / Program / Peak)
1000 / 2000 / 4000
LF
HF Sensitivity
110 / 220 / 440 (2.83V@1m)
104.2dB (60Hz - 800Hz)
LF
HF Processing
108.1dB (800Hz - 18kHz)
XTA & LAKE & Adamson
Presets
MSeries
Physical Data Dimensions & Weight
Height (cm)
Width (cm)
32” (81.2)
Depth (cm)
23.8” (60.5)
Weight (Kg) Attributes
18.5” (47)
91.5lbs (41.6)
Trapezoid Enclosure
Rugged 5/8”, 11 ply Baltic Birch Cabinet
Wood Finish: Textured Water Borne Acrylic
14 Gauge Cold Steel Grille
Metal: Polyester Sandtex™ Powder
Fiberglass Acoustic Waveguide Accessories & Options
Custom Flightcase
Technical Data Frequency Response
(+/-3dB)
Full Range Preset Frequency Range
45Hz - 18kHz
Xover Preset Maximum SPL
50Hz - 18kHz (Continuous)
137.5dB
Monitor Preset
System Type
M215
Active Directivity & Connection Type
Loaded with 2 of our ND15-L drivers and a 4” diaphragm
compression driver, the M215 is an ideal monitor for
Drivers
Neutrik Speakon™ NL4 (Nominal Impedance)
drum fills, keyboard monitor applications and extremely
LF (x2)
ND15-L 15” Kevlar
high output front line monitoring. Unlike other double
Neodymium 2 x 6Ω (3Ω)
HF
B&C DE1000 4” - 1.5” Exit
15” designs, the M215 also incorporates Adamson’s Advanced Cone Architecture™ drastically improving the vocal response while producing enough SPL to stop the most demanding musicians in their tracks.
Vert. x Hor.
50° x 50°
Neodymium Compression
Power Handling
Driver (8Ω) (AES / Program / Peak)
LF (x2)
1000 / 2000 / 4000
HF
140 / 280 / 560
Sensitivity
(2.83V@1m)
104.9dB (45Hz - 800Hz)
LF
HF Processing
108.5dB (800Hz - 18kHz)
XTA & LAKE & Adamson
Presets
MSeries
When it comes to conventional enclosures, Adamson
Versatility through choice
leads the way with innovative driver and wave-guide designs, rigging and ergonomics.  From our largest to our smallest speaker enclosures, Adamson’s engineering laboratories strive to provide the best possible solutions for a variety of system applications.
CONVENTIONAL ENCLOSURES
Physical Data Dimensions & Weight
SX Series
SX18
/ SX Sub
Height Front (cm) 42” (106.7) / 42” (106.7)
Width (cm)
20” (50.8) / 24.6” (62.5)
Depth (cm)
22” (56) / 24.5” (62.2)
Weight (Kg)
143lbs (65) / 135lbs (61.4)
Attributes
Rugged 5/8”, 11 ply Baltic Birch Cabinet
Wood Finish: Textured Water Borne Acrylic
14 Gauge Cold Rolled Steel Grille
fill to complement a variety of touring or permanent
Metal Finish: Polyester Sandtex™ Powder
applications. Naturally, the SX18 and SX Sub are
SX18 includes 5 Built-in Fly Points and Fitted Wooden
Dolly, Heavy Duty Built-in Urethane Wheels in the SX
Sub
The SX Series is a powerful and effective solution for a main P.A. system, or as an additional side- or drum-
loaded with our proprietary driver technology. The SX
Technical Data
Sub offers a tilt back wheel system while SX18’s are fitted with a dolly board, making transport of either
Frequency Response (+/-3dB)
cabinet a breeze.
SX18
/
SX Sub
Full Range Preset 40Hz - 18kHz / 40Hz - 200Hz
Frequency Range
Designers have the option to utilize the SX18 as a single cabinet or an array of cabinets. The trapezoidal SX18 enclosure comes standard with a switchable passive network between the mids and highs, allowing for two-way or three-way operation. With one Adamson MSX 10” mid-range compression driver, and one 3” diaphragm high frequency
Xover Preset
80Hz - 18kHz / 35Hz - 80Hz
Maximum SPL
(Continuous)
133dB / 128.7dB
Xover Preset
Full Range Preset 132dB / N/A System Type
Passive 2 Way /
Active 3 Way Plus Sub Directivity & Connection Type
Hor. x Vert.
Neutrik Speakon™ NL4 / NL8 (SX Sub)
60° x 40°
compression driver mounted on an Adamson mid/ high waveguide, the SX18 provides smooth mid/high coverage that we are renowned for. To add to its versatility, the SX18 features one Adamson AW18 18” LF transducer and can extend down to 45Hz for jazz or lighter material. If additional sub bass re-enforcement is required, the companion SX Sub is a dual 18” front loaded cabinet that provides a solid and punchy sub extension. Whether you need a reliable system for your venue, or rugged and sturdy enhancement to your existing rig, the SX series offers a high output solution for a broad range of applications.
Drivers
(Nominal Impedance)
LF
AW18 18” Kevlar Ferrite (8Ω)
MF
MSX Ferrite Driver (8Ω)
HF
B&C DE82 3” - 1.4” Exit Ceramic
Compression Driver (8Ω)
LF (x2)
AW18 18” Kevlar Ferrite
2 x 8Ω (4Ω) (SX Sub)
Power Handling
(AES / Program / Peak)
LF
600 / 1200 / 2400
MF
150 / 300 / 600
HF
80 / 160 / 320
LF (x2)
600 / 1200 / 2400 (SX Sub)
Sensitivity
(2.83V@1m)
LF
98.1dB
MF
111.1dB
HF
105.1dB
LF Processing
101.8dB (SX Sub)
XTA & LAKE
Presets
Physical Data
LX10
10MX
CB 18” (45.7)
Dimensions & Weight
Height Front (cm) 23.46” (59.6)
13.25” (34.5)
Width (cm)
12.5” (31.8)
20.35” (53)
9.75” (24.8)
Depth (cm)
14.13” (35.9)
15” (39.1)
11” (27.9)
Weight (Kg)
47.3 lbs (21.5)
47.3lbs (21.5)
26lbs (11.7)
Compact
Attributes & Accessories
Rugged 5/8”, 11 ply Baltic Birch Cabinet Wood Finish: Textured Water
Borne Acrylic 14 Gauge Cold Rolled Steel Grille
Metal Finish: Polyester Sandtex™ Powder Tripod Socket Mount in the LX10, Internal
Crossover & Rotatable Horn (CB1)
Custom Rigging Points (CB1)
Optional U-bracket Hardware - Horizontal or Vertical Yoke (CB1)
Technical Data
LX10 Frequency Response (+/-3dB) Full Range Preset 55Hz - 18kHz
10MX
CB1
55 Hz - 18 kHz
80Hz - 18kHz
125Hz - 18kHz
100Hz - 18kHz
Frequency Range
Xover Preset
125Hz - 18kHz
Maximum SPL
(Continuous / Peak)
Xover Preset
122.15dB
Full Range Preset 121dB
122.5dB / 131.3dB
119.5dB
121dB / 130.3dB
118.8dB
121.5dB / 130.2dB
n/a
Passive Directivity & Connection Type
Passive
Passive
70° x 35°
90° x 60°
Monitor Preset System Type
Vert. x Hor.
70° x 35°
(rotatable)
Neutrik Speakon™ NL4
NL4
Drivers
n/a
NL4
(Nominal Impedance)
LF
AX10 10” (8Ω)
AX10 10” (8Ω)
ND8-B 8.5”
Kevlar Neod.Driver (8Ω)
HF
Power Handling
B&C DE16 1” Exit
B&C DE82 1.5” Exit
B&C DE16 1” Exit
Compression Driver (8Ω) Compression Driver (8Ω) Compression Driver (8Ω) (AES / Program / Peak)
LF
300 / 600 / 1200
300 / 600 / 1200
250 / 500 / 1000
HF
60 / 120 / 240
40 / 80 / 160
30 / 60 / 90
Sensitivity
(2.83V@1m)
LF
99.1dB
100.5dB
94.3dB
HF
105.1dB
104.5dB
109dB
Processing
Full Range n/a
n/a
98.6dB
Presets
XTA & LAKE
enclosures
Point Series contractor boxes
We offer a full line of contracting boxes with a unique trim, grille and box geometry. Designed with the same hi modulus materials and our world renowned neodymium, Kevlar transducers, the Point Series is aimed to outperform those in its class. These sleek enclosures can be ordered in any Pantone color with color matched SLR™ rigging options. The Point series ranges from 8” enclosures to 15” enclosures with powerful subs to complement the 2-way enclosures. For more information refer to the Point series brochure or view the Point series online at www.adamsonsystems.com
INSTALLATION EXCLUSIVE
Headquarters Brock Adamson
Adamson Systems Engineering Inc.
President & CEO
1401 Scugog Line 6
24/7
Port Perry, ON L9L 1B2 Jesse Adamson Director of Marketing and Sales
Canada
jesse@adamsonsystems.com
F: +1 905 982 0609
Benoit Cabot Product Development & Applications Specialist ben@adamsonsystems.com Ewan McDonald Technical Sales & Applications Specialist
T: +1 905 982 0520 www.adamsonsystems.com Adamson Europe GmbH Billstraร e 173 20539 Hamburg Germany T: +49 40 7699 9959 0 F: +49 40 7699 9959 9
ewan@adamsonsystems.com
Adamson Europe GmbH Jochen Sommer Director of European Operations jochen@adamsonsystems.com David Dohrmann Applications Specialist david@adamsonsystems.com Sven Bรถhnke Sales Manager Germany sven@adamsonsystems.com
CONTACT
Copyright Š 2011 Adamson Systems Engineering Inc.
ADAMSONSYSTEMS.COM