ANEMOI PROJECT A RESPONSIVE DESIGN PROJECT
Anemoi project is mainly based on responsive design approaches that increases the effieciency of a building, and generates uniqe forms that is created by the nature parameters. The design process consists of several phases which are: 1. Analysing the wind movment & direction. 2. Generating the form using wind carving 3. Analysing solar radiation. 4. Generating the skin of the building.
Ahmed Adel
Radiation Analysis
Wind Analysis
Wind Carving
Analysing the wind movement, direction & speed to be able to use the wind to generate the form of the building, and calculate the wind loads falling on it
Generating the form using the carving of the wind by using agent-based design after analysing the wind movement & direction.
1
2
3
4
Analysing and calculating the solar radiation falling on the building.
Generating Skin Generating a dynamic skin to be applied on the building using a morphogenetic design approach, and connecting the opening rate of each component to the amount of solar radiation falling on it.
Efficiency Comparison Applying the skin on the form Applying the skin only on the faces with the highest solar radiation intensity
• The wind loads applied on the most exposed face of the building drops after the carving of the wind about 100 Pa ( N/m^2 ).
• After applying the adaptive skin on the building the solar radiation drops from 40191.39433 Kwh/m^2 to 32281.186227 Kwh/m^2
Skin component opening rates
GH Defination