CHAIN - STUD LINK ANCHOR

• Reference Chart estimate formulated values

• Sizes available up to 210 mm

• See page 272 for in-stock Stud Link Anchor Chain

A potential hazard exists when lifting or dragging heavy loads with tackle block assemblies. Failure to design and use tackle block systems properly may cause a load to slip or fall, the result could be serious injury or death. A tackle block system should be rigged by a qualified person as defined by ANSI/ASME B30.

SWIVEL - FORERUNNER, ASSEMBLY, WITH LINKS

• Material: Grade 3

• Standard: ISO 1704

• Finish: Black Bitumen

• Identification: Size/WLL, Batch Code

• Certification: Lloyd's Certificate (on request)

CHAIN - OPEN LINK

• Sold in 90 ft shots

• Material: Grade 2

• Standard: ISO 1704

• Finish: Black Bitumen

• Identification: Size/WLL, Batch Code

CHAIN - STUD LINK ANCHOR

• Sold in 90 ft shots

• Material: Grade 2, 3

• Standard: ISO 1704

• Finish: Black Bitumen

• Identification: Size/WLL, Batch Code

• Certification: Lloyd's Certificate (on request)

To prevent the possibility of serious bodily harm: DO NOT EXCEED the working load limit of chain or components. NOT USE FOR OVERHEAD LIFTING OR HOISTING. DO NOT USE if the chain or components are visibly distorted or worn.

SHACKLE - KENTER SHACKLE, JOINING LINK

• Material: Grade 2, 3

• Standard: ISO 1704

• Certification: Lloyd's Certificate (on request)

• Identification: Size/WLL, Batch Code

• Finish: Black Bitumen

TURNBUCKLE - CHAIN STOPPER ASSEMBLY, DEVIL'S CLAW

• Material: Grade 3

• Standard: ISO 1704

• Finish: Black Bitumen

• Identification: Size/WLL

• Rated in Metric Ton(s)

LINK - CONNECTING, PEAR, ANCHOR JOINING

• See page 266 for schematics

• Material: Grade 3

• Standard: ISO 1704

• Finish: Black Bitumen

• Identification: Size/WLL, Batch Code

• Certification: ABS Certificate (on request)

LINK - CONNECTING LINK FOR PENNANT LINES, GN®

• Material: Alloy steel

• Finish: Painted

• Design Factor: 5:1

• Temperature Range: -20ºC up to +200ºC

• Certification: Certificate of Conformity

3.1 material certificate EN 10204

• Rated in Matric Ton(s)

TUNING FORK - GN®

• Material: High tensile steel

• Finish: Painted

• Design Factor: 4:1

• Temperature Range: -20ºC up to +200ºC

• Certification: Certificate of Conformity (on request)

• Rated in Metric Ton(s)

Tolerance: Forged parts ± 5%, machined parts ± 1 mm

CHAIN - OVERHEAD LIFTING, GRADE 80

• Material: Grade 80, Alloy Steel

• Standard: EN 818-2

• Finish: Black

• Design Factor: 4:1

• Identification: OC8, Batch Code

CHAIN - OVERHEAD LIFTING, GRADE 100, OCEAN BRAND®

• Material: Grade 100, Alloy Steel

• Standard: EN 818-2, ASTM A973

• Design Factor: 4:1 • Identification: OC10, Batch Code Qty. / Drum (ft)

Note: Limited Black finish available.

Full Drum Cut Lengths Part Number Dia. Inside Length Inside Width Price / ft Price / ft 9/32 4300 7.4 22.1 10.4 74 500 5.69 6.54 44-9/32"G100 5/16 5700 8.4 25.7 12.7 104 500 7.30 8.39 44-5/16"G100 3/8 8800 10.2 31 14.5 148 500 9.37 10.77 44-3/8"G100 1/2 15 000 13.2 40.1 19.1 250 300 15.20 17.48 44-1/2"G100 5/8 22 600 16.3 49 22.1 379 200 23.25 26.73 44-5/8"G100 3/4 35 300 20.3 61.5 27.7 598 100 47.20 54.28 44-3/4"G100 7/8 42 700 22.4 68.6 32.5 775 100 59.90 68.88 44-7/8"G100 1 59 700 26 78 37 984 100 104.62 120.31 44-1”G100

CHAIN - TRANSPORT, GRADE 70, OCEAN BRAND®

• Material: Grade 70, Carbon Steel

• Standard: EN 12195-3, ASTM A413

• Finish: Yellow Chromate

• Design Factor: 4:1

• Identification: OC7

Compliant with National Safety Code Standard (NSC) 10 Part 1. Division 3, Section 11 (4) “On and after January 1, 2011 a person shall not use a tie down or a component of a tie down to secure cargo to a vehicle unless it is marked by the manufacturer with respect to its working load limit."

The Tag is for 3/8" grade 70 chain which is now required for all tie down chains to meet the national safety standard. These chains are made in our shop to your requirements.

CHAIN - ALLOY LONG-LINK, GRADE 80, OCEAN BRAND®

• Material: Grade 80, Alloy Steel

• Finish: Painted Yellow

• Design Factor: 4:1

To prevent the possibility of serious bodily harm: DO NOT EXCEED the working load limit of chain or components. NOT USE FOR OVERHEAD LIFTING OR HOISTING. DO NOT USE if the chain or components are visibly distorted or worn.

CHAIN - PROOF COIL, GRADE 30

• Material: Grade 30, Mild Carbon Steel

• Finish: Galvanized, ASTM A413

• Design Factor: 4:1

CHAIN - PROOF COIL, GRADE 30

• Material: Grade 30, Mild Carbon Steel

• Finish: Self Coloured, ASTM A413

• Design Factor: 4:1

• 6-5/16"30BX250 Sold in full drum only

CHAIN - SELF COLOURED, HIGH TEST, GRADE 43

• Material: Grade 43, Carbon Steel

• Finish: Self Colored, ASTM A413

• Design Factor: 4:1

CHAIN - MID-LINK FISHING, GRADE 80

• High Strength alloy steel with grade 80 strengths

• Material: Grade 80, Alloy Steel

• Finish: Self Colour

• Design Factor: 4:1

To prevent the possibility of serious bodily harm: DO NOT EXCEED the working load limit of chain or components. DO NOT USE FOR OVERHEAD LIFTING OR HOISTING. DO NOT USE if the chain or components are visibly distorted or worn.

CHAIN - SWEEP, GRADE 80

• Thru Hardened for Wear Resistance

• Material: Grade 80, Alloy Steel

• Finish: Self Colour

• Design Factor: 4:1

CHAIN - LONG-LINK LASHING, GRADE 80

• Material: Grade 80

• Finish: Galvanized

• Design Factor: 4:1

CHAIN - ALLOY LONG-LINK, GRADE 80, TRYGG®

• Material: Grade 80, Alloy Steel

• Finish: Self Coloured

• Design Factor: 4:1

CHAIN - ALLOY SHORT-LINK, GRADE 80, TRYGG®

• Material: Grade 80, Alloy Steel

• Finish: Self Coloured

• Design Factor: 4:1

CHAIN - STAINLESS, GRADE 50

• Rated for Overhead Lifting

• Material: Grade 50, 316L Stainless Steel

• Finish: Stainless Steel

• Design Factor:

To prevent the possibility of serious bodily harm: DO NOT EXCEED the working load limit of chain or components. DO NOT USE FOR OVERHEAD LIFTING OR HOISTING. DO NOT USE if the chain or components are visibly distorted or worn.

CHAIN - TENSO

• For General Light Duty applications

• NOT for Overhead lifting or Critical Applications

• Standard: NACM

• Finish: Zinc/Galvanized

To prevent the possibility of serious bodily harm: DO NOT EXCEED the working load limit of chain or components. DO NOT USE FOR OVERHEAD LIFTING OR HOISTING. DO NOT USE if the chain or components are visibly distorted or worn.

Manila rope is a type of rope made from Manila hemp. Manila hemp is a type of fiber obtained from the leaves of the abaca. It is not actually hemp, but named so because hemp was long a major source of fiber, and other fibers were sometimes named after it. The name refers to the capital of the Philippines, one of the main producers of abaca.

Manila rope is very durable, flexible and resistant to salt water damage, allowing its use in rope, hawsers, ship’s lines, and fishing nets.

These ropes have passed all routine quality control inspection and testing procedures, and, when new, have a guaranteed breaking strength in accordance with the requirements of US Federal Specification TR-605B, Type M Class 1, Amendment 3.

ROPE - MANILA, 3-STRAND

• Material: Manila Hemp

• Standard: USFS TR-605B

• Specific Gravity: 1.38 / Sinks

Made of natural fiber it offers low stretch, superb knot holding ability and is biodegradable.

*Actual Weight per coil may vary!

ROPE - MANILA, 4-STRAND

• Material: Manila Hemp

• Standard: USFS TR-605B

• Specific Gravity: 1.38 / Sinks

*Actual Weight per coil may vary!

ROPE - DSM DYNEEMA, 12-STRAND

DSM Dyneema is made from ultra-high molecular-weight polyethylene and is an extremely high-strength, low-stretch rope. Dyneema is stronger than steel cable, floats on water and is extremely resistant to abrasion. It is commonly used to replace steel cable when weight is an issue. It also makes an excellent material for winch cables.

In house splicing available - Call with your specifications

Oceanside Equipment offers Custom Made DSM Dyneema Rope Assemblies for heavy duty marine and industrial towing lines, towing hawser, mooring lines, dock lines, anchor lines, hawsers, construction rope, mining rope, oil field rope, offshore marine rope, oil platform rope, railroad rope, and rope for heavy duty industrial applications. All our lines are custom made-to-order per the customer’s specifications.

Stock Colour Options:

Additional colour options are available with custom orders.

ROPE - DSM DYNEEMA, 12-STRAND

• Material: Synthetic DSM Dyneema

• Standard: ISO 9554, 1346

• Finish: Dyed Colour

• Specific Gravity: 0.97 / Floats

• Items priced are in stock.

SLINGS - SLING CHART, DYNEEMA (SYNTHETIC ROPE), EYE & EYE

Tensile strengths are determined in accordance with Cordage Institute 1500.2. Test Methods for Fiber Rope. Minimum Breaking Loads (MBL) published assumes standard eye splices at each end of the rope. Minimum D/d 3:1

SLINGS - SLING CHART, DYNEEMA (SYNTHETIC ROPE), ENDLESS GROMMET

Tensile strengths are determined in accordance with Cordage Institute 1500.2. Test Methods for Fiber Rope. Minimum Breaking Loads (MBL) published assumes standard eye splices at each end of the rope. Minimum D/d 3:1