FULLVIEW SERIES
REVOLVING DOOR TECHNICAL MANUAL
AGP Door Systems Pty Limited
OUTLINE
Easily the most popular revolving door available on the Australian market, the AGP Fullview Series is an exceptional all purpose entrance door. With an extensive range of optional features, it is suitable for any building type and many different applications. As the ‘Fullview’ Series name suggests, the door is designed to be transparent and modern without the cluttered look of conventional revolving doors that require metal columns at the central axis or fully framed rotating door wings. The door is available in either 3 or 4 wing configuration in sizes from 2400mm to 5200mm in diameter and can be built with either fixed or collapsable door wings. The electrical motor drive and control system is mounted in the canopy for easy access and service. The canopy can be finished in stainless steel, aluminium or brass. Every ‘Fullview’ door is fitted with a range of electronic safety sensor to ensure optimum safety at all times. A large number of innovative options and engineering initiatives are available to allow each door to be custom built to suit your specific requirements.
Fixed ceiling
Canopy Lights
Revolving ceiling
Top rail
Control switch panel
Side walls
2
Press to slow button Door mullion
Bottom rail
Silicon joint
Door leaf
DIMENSION DETAILS
A
2100 - 3200
400
Nominal
3 LEAF CONFIGURATION
FLOOR LEVEL
B
PLAN
ELEVATION
‘A’ O/A Diameter
2800
3200
3600
4000
4400
‘B’ Opening
1300
1500
1700
1900
2100
A
2100 - 3200
400
Nominal
4 LEAF CONFIGURATION
FLOOR LEVEL
B
PLAN
ELEVATION
‘A’ O/A Diameter
3600
3800
4000
4200
4400
‘B’ Opening
2442
2584
2725
2867
3008
NOTE: Doors can be custom built to your exact size
3
STANDARD FEATURES
CLADDING
CONTROL SWITCH PANEL
Doors can be supplied in a range of finishes
All doors are fitted with a control switch panel
including powdercoated and anodised
that has a number of features:
aluminium and stainless steel in linished or
The door will rotate to the lock position and automatically lock. Should ‘clamshell’ sidewalls be fitted, these will automatically close. This mode will override a signal from a
mirror finishes.
LOCKING
‘LOCK’ mode
remote security system. ‘STOP’ mode
A
The door will stop in the locking position but EMERGENCY
Electric locking of the doorset is built into the
the door will not lock.
STOP
drive motor to provide a secure entrance at
B
DOOR OPERATION Fullview doors can be programmed to operate
LIGHTS in the inner revolving ceiling. These lights give
C
STOP
Quartz halogen down lights are fitted within
in the following ways.
REMOTE LOCK
night.
a high light level within each quadrant of the
RUN
door and as the lights rotate within the door
AGP DOOR SYSTEMS
RUN
1800 674 408
there are no ‘strobing’ effects or shadows
constant speed with no radar sensors mounted on the door canopy.
In this mode the door will remain stationary
wings pass under a stationery light. These after the door has locked.
In this mode the door will revolve at a
‘STOP - RUN’ (Optional Extra).
within the quadrant caused when the door lights automatically switch off 20 seconds
‘CONSTANT SPEED’ (Standard).
A. Mode and Fault Indicator LED’s
until a radar sensor picks up an approaching person. The door will then smoothly
The 3 indicator LEDs are designed to indicate
accelerate to the run speed and when no
the current status of the four position mode
traffic has been detected for a predetermined
GLASS
key switch as well as any fault indications.
period the door will slow down to idle speed
All glazing within the revolving door meets the
The LEDs will either be switched constantly
requirements of AS1288:2007. The glass to the
on, slowly flashing or fast flashing and can
revolving carousel is 12mm toughened. The
be in any combination of these to give a
glass to the sidewalls is 8mm curved toughend.
particular mode or fault indication.
for two revolutions before stopping. This mode requries the mounting of radar sensors onto the door canopy.
All glass is clear with other options, such as low iron or tinted, available upon request.
B. Emergency Stop Button When the button is pressed the door will stop
SPEED ‘SLOW DOWN’ BUTTON All doors are fitted with an illuminated push button that will slow the door down to half of its normal speed for two revolutions. This will make the revolving door more safely
4
immediately.
C. Mode Key Switch The four position mode switch can have the key removed in any position leaving the door set in that particular operational mode. The functions of the control switch are as follows;
accessible for wheelchair users and elderly
‘REMOTE’ mode
people.
This mode is used when the door is connected to a remote security system that will automatically switch the door from lock mode to run mode on a programmed basis. ‘RUN’ mode (automatic operation)
Images (Next Page)
The door will run automatically and override
1: 182 George Street, Sydney
any remote signals.
2: Hilton Hotel, Sydney 3: 818 Bourke Street, Docklands 3: 1 Margaret Street, Sydney
OPTIONAL FEATURES
AUTOMATIC SLIDING ‘CLAMSHELL’ SIDEWALLS
MANUAL BREAKOUT DOOR WINGS
ILLUMINATED SIGNAGE
As an alternative to additional night doors
As an option, all Fullview series revolving
building entry the canopy fascia of the
that close off the entrance of the revolving
doors can be fitted with an inbuilt collapsing
revolving door can have numbers, the
door at night, AGP doors can be fitted with
mechanism. By folding back the door wings
building name or company logos laser cut and
‘clamshell’ sliding sidewalls. These clamshells
the automatic drive is stopped to facilitate
illuminated from behind.
are indistinguishable from the sidewalls of a
large continuous traffic flow through both
conventional revolving door and provide a
sides of the door. This facility is very useful
more aesthetically pleasing product.
for theatres and venues where there is a large
When the door is switched to lock mode, the sidewalls are motorised to automatically slide
To provide personalised branding to the
surge of people at the end of a performance or sporting event.
to the closed position and lock to prevent unwanted access to the door entry area and to keep it free from airborne debris, papers, dust and rubbish. When the Door is switched to run mode the clamshells automatically slide open and the door will commence normal revolving operation.
AUTO WIND BACK DOOR WINGS An option for all Fullview series doors fitted with collapsable door wings is to fit a motor drive system that will automatically open the door wings. This system is particularly useful if there is a need for emergency egress, smoke ventilation requirements or when high volumes of traffic are anticipated.
CANTILEVERED AWNINGS To provide greater protection for users when a door is installed in an exposed location, or simply as an architectural feature, a custom made cantilvered glass awning can be integrated into the revolving door design.
BATTERY BACKUP A UPS can be fitted to the revolving door to provide continued power to the revolving door (for a limited period) in the event of a power failure. This is particularly useful when used with the auto wind back feature to provide an alternative egress route in an emergency.
EXTRA HEIGHT CANOPY Fullview revolving doors have a nominal height of 400mm however as as architectural feature it is possible to provide special extended height canopies to provide an imposing building entry.
5
SAFETY FEATURES
MULLION SAFETY SENSORS
DOOR LEAF SAFETY SENSORS
DOOR RAIL SAFETY SENSORS
The AGP mullion safety sensors provide
The AGP rotating door leaf infrared safety
The AGP rotating door rail contact safety
optimum safety between the leading edge
sensors are fitted to the top door rails and
sensors are fitted to the front of each door
of the mullion and the approaching revolving
scans the area directly in front of each door
leaf. Should a person’s foot come into contact
door leaf.
leaf.
with the bottom rail the revolving door will
If an object is detected in front of the leading
Should a person be detected the door will
immediately stop.
mullion when the door leaf is within a
slow down to the speed of the person and if
The system is designed to stop the revolving
distance of 500mm from the leading mullion
necessary stop.
door should the infrared sensor fail to pick up
the door will stop rotating until the object
The system is designed to minimise the
the obstruction earlier.
has moved from the safety zone.
possibility of collision between each revolving
The AGP door rail safety sensors comply with
The AGP mullion safety sensors comply with
door leaf and a person or object inside the
the Australian Standard on Revolving Doors
the Australian Standard on Revolving Doors
revolving door.
AS5007:2008
AS5007:2008.
For elderly or handicapped persons the ability of a door to slow down to the same speed as they are walking has real safety advantages. This system is ideally suited for larger doors when there is more space inside each door quadrant. The AGP door leaf safety sensors comply with the Australian Standard on Revolving Doors AS5007:2008
6
Images Front: 2 Market Street, Sydney Page 2: SA Water @ VS1, Adelaide Back: 737 Bourke Street, Melbourne
CASE STUDIES
BRISBANE SQUARE Brisbane [2006]
DEUTSCHE BANK PLACE Sydney [2005]
MELBOURNE CENTRAL Melbourne [2003]
To enable this 38 storey high rise building,
The prestigious 126 Phillip Street development
The redevelopment of the Melbourne Central
which houses the Brisbane City Council
features 3 off 3600mm diameter 4 wing
office building features a striking glass
offices and library, to achieve a 5 Green
Fullview Series revolving doors in a natural
assembly into the foyer of the main office
Star rating, a revolving door at the main
anodised aluminium finish to match the
building. To complement this impressive
entrance was essential to maintain an
surrounding framed glazing of the 15m high
entrance, 2 off large 4600mm and one
airlock and provide pleasant conditions
covered plaza.
3000m diameter ‘Fullview’ revolving doors
within the public plaza regardless of the
AGP undertook the revolving door package in
were installed in a mirror stainless steel finish
weather outside.
conjunction with this plaza glazing as well as
and featuring automatic sliding clamshell
A 3700mm diameter Fullview Series
the extensive lift foyer glazing. The revolving
sidewalls for greater security at night.
revolving door in a linished stainless steel
doors feature specially designed illuminated
Builder: Bovis Lend Lease
finish was selected to suit the surrounding
canopy ceilings made from white frosted glass
frameless glass assembly. The door features
ceiling panels that can be easily removed to
automatic sliding clamshell sidewalls and
allow for servicing of the drive motor.
manual breakout door wings.
Architect: ARM / B&N Pty Ltd
Builder: Bovis Lend Lease
Builder: Baulderstone Hornibrook
Glazier: Architectural Glass Projects
Glazier: Permasteelisa Pty Ltd
Architect: Foster & Partners / Hassell
Architect: Denton Corker Marshall
7
In Pursuit Of Excellence 9 Liberty Road Huntingwood NSW 2148 T (+61) 02 9671 0000 F (+61) 02 9672 1951 W www.agpgroup.com.au
A proudly Australian owned and operated company, AGP Door Systems Pty Limited is a specialist designer, manufacturer and installer of a wide range of automatic and manually operated revolving doors and high security entry/exit systems. The Fullview series revolving door has been the most popular door in Australia since 1995, with a combination of architectural appeal, customised quality design and a wide range of optional features making it stand out from the competition.