Hydraulic Piston Pump DPA Series
Hydraulic Piston Pump DPA Series
Piston Pump DPA Series Features Shortening the length of pump The total length of DPA series is 30% shorter than the conventional tandem pump of same class of displacement.
Various Controls The DPA series can be controlled by hydraulic input either negative pilot pressure or positive one. Beside, it is capable of responding to electrical and electronic input signal.
Specification Model
Max Displacement
Rated Pressure
Max. Speed for self priming
Max Pressure
Max. input Torque
Weight
Application
kgf
ton
cc/rev
kgf/cm2
Mpa
kgf/cm2
Mpa
rpm
kgf m
N m
DPA117
117 X 2
350
34.2
400
39.2
2,450
75
735
(including Bell Housing) 20~25
DPA140
140 X 2
350
34.3
400
39.2
2,400
90
882
(including Bell Housing) 29~34
Reduced Noise and Pressure Pulsation The rigid parts design and analysis of cylinder pressure decreases noise level and pressure pulsation.
121 160
Dimensions
High Reliability and Long Life A high reliability is obtained by solving the over-load problem, as well as the fretting corrosion between swash-plate and support, decreasing the possibility of external leakage through one body and several short bolts, and increasing the strength of parts including shaft.
D3
L1
L2
L3
L4
L5
L6
L7
L8
L9
L10
L11
DPA117
409.6 428.6
450
64
452
83
350
260
250
100
93
120
199
255
DPA140
511.2 530.2
553
43
499
96
402
285
277
114
104
107
208
282
Model
D1
D2
Discharge Flange
Suction Flange
Size
a
b
c
d
e
f
Size
a
b
c
d
DPA117
23.8
50.8
19
63
10
M10-16
DPA117
50.8
88.9
60
M12-18
DPA140
27.8
57.2
25
73.5
10
M12-22
DPA140
61.9
106.4
75
M16-24
Dimensions of shaft end Model
No. of teeth
P.C.D
Pressure Angle
Module
Rule
DPA117
12
30.0
20째
2.5
JIS D2001
DPA140
17
42.5
20째
2.5
JIS D2001
Main Control Valve Remote Control Valve Pedal Valve
•Head office
456-3, Nae-dong Changwon, Gyungnam, Korea (Zip code : 641-050) Telephone. +82-55-269-5310, 5311 Telefax. +82-55-269-5222 E-mail. jongho.ahn@doosan.com •Europe office TongMyung Engineering Europe GmbH Werftstr 17 D-40549 Dusseldorf Germany Telephone. +49-211-569-2765 Telefax. +49-211-569-2766 E-mail. robert.suh@mottrol.de
DM 002-FEB/09
Main Control Valve / Pedal Valve / Remote Control Valve
Main Control Valve
Pedal Valve Features
Features The TMVO-70 valve series is operated by pilot signal. It has some load check in each section and also includes boom holding valve. This valve system is designed with paralled and tandem circuit. It provide our customer to control precisely.
The RCVP4 valve is excellent in dustproof, waterproof and durability and is designed for minimizing pressure loss. This valve also performs excellent response.
Specification
Model
Dimensions
RCVP4
Max. input pressure Max. output pressure
Model
TMVO-70-10
Max. Flow
Mpa
(ℓ/min)
25
70
Max. Flow
Mpa
Mpa
(ℓ/min)
6.9
0 ~ 3.9
10
Application
5~8ton
Remote Control Valve
Specification Max. Pressure
Dimensions
Features
Application
Sectional Type
5~8ton
Features The operating torque can be lowered upon a demend, it is controlled by a reduced operation force. A good response is gained by minimizing pressure loss. By attaching an electric switch, it is easy to compose an electric control as a safty function.
Dimensions
Specification Model
TR40K
Max. input pressure Max. output pressure
Max. Flow
Mpa
Mpa
(ℓ/min)
9.8
0 ~ 3.9
30
Application
All types of excavators
Hydraulic Piston Pump T5V Series
•Head office
456-3, Nae-dong Changwon, Gyungnam, Korea (Zip code : 641-050) Telephone. +82-55-269-5310, 5311 Telefax. +82-55-269-5222 E-mail. jongho.ahn@doosan.com •Europe office TongMyung Engineering Europe GmbH Werftstr 17 D-40549 Dusseldorf Germany Telephone. +49-211-569-2765 Telefax. +49-211-569-2766 E-mail. robert.suh@mottrol.de
DM 002-FEB/09
Hydraulic Piston Pump T5V Series
Piston Pump T5V Series Features The T5V series are high-pressure, swash-plate type pump developed for construction equipments and general industrial machinery based upon our long and rich experience. High reliability and longevity are achieved by adoption of the high-load bearings and unique anti-wear materials for rotating group The spherical valve plate and improved hydraulic balance provide stable cylinder rotation, thus achieving high efficiency even in a low-pressure and low-speed operating range. The T5V series can be controlled by hydraulic or electrical methods. And various control methods such as flow control, pressure control, horsepower control, and the combination of these are standardized and available.
Specification
Model
T5V63 T5V80 T5V112 T5V140 T5V180
Max Displacement
Rated Pressure
Max. Speed for self priming
Max Pressure
Max. input torque
Weight
Application
cc/rev
kgf/cm2
Mpa
kgf/cm2
Mpa
rpm
kgf m
N m
kgf
ton
63 X 2 80 X 2 112 X 2 140 X 2 180 X 2
320 320 320 320 320
31.4 31.4 31.4 31.4 31.4
350 350 350 350 350
34.3 34.3 34.3 34.3 34.3
2,650 2,400 2,360 2,150 1,950
35 54 60 114 112
343 529 588 1117 1098
81 84 125 160 160
13~17 13~17 20~25 29~37 39~45
Dimensions
Optional gear pumps of various sizes can be attached. Accordingly, separate pump unit is not necessary as control or medium duty system pressure source. Hydraulic units can thus be made compact.
Model
D1
D2
d
L1
L2
L3
L4
T5V63 T5V80 T5V112 T5V140 T5V180
180 180 224 250 250
125 125 160 180 180
18 18 22 22 22
76 76 78 93 93
70 70 80 92 92
70 70 80 92 92
140 140 140 140 140
L5
L6
L7
190 89 98 190 89 98 234 100 110 256 112 123 256 112 123
L8
L9
L10
L11
L12
L13
L14
L15
L16
L
8 8 8 8 8
228 228 265 305 305
138 138 167 190 190
37 37 41 53 53
37 37 41 53 53
464 97 195 464 97 195 538 109 220 618 121 245 618 121 245
78 78 78 80 80
618 618 694 791 791
Dimensions of shaft end Size
T5V63 T5V80 T5V112 T5V140 T5V180
no. of teeth
14 12 12 17 17
Pitch circle dia
29.6 30.0 30.0 42.5 42.5
Pressure angle o
30 20o 20o 20o 20o
Module
Rule
12/24 2.5 2.5 2.5 2.5
SAE JIS D2001 JIS D2001 JIS D2001 JIS D2001
Hydraulic Piston Pump T5VP2D28/36 Series
•Head office
456-3, Nae-dong Changwon, Gyungnam, Korea (Zip code : 641-050) Telephone. +82-55-269-5310, 5311 Telefax. +82-55-269-5222 E-mail. jongho.ahn@doosan.com •Europe office TongMyung Engineering Europe GmbH Werftstr 17 D-40549 Dusseldorf Germany Telephone. +49-211-569-2765 Telefax. +49-211-569-2766 E-mail. robert.suh@mottrol.de
DM 002-FEB/09
Hydraulic Piston Pump T5VP2D28/36 Series
Piston Pump T5VP2D28/36 Series Features
Dimensions T5VP2D28
This is a variable displacement double-piston pump discharging with two equal displacements from one cylinder block. This pump is so compact as to be appeared a single pump though this is actually a double pump.
Specification Model
Max Displacement
Pressure (kgf/㎠)
Max. Speed Max. input torque
Hydraulic fiuid
Weight
(cc/rev)
Rated
Max
rpm
kgf m
T5VP2D28
27.5 X 2
220
250
2,600
14
-20 ~ +95℃
10 ~ 1,000 cSt
33
T5VP2D36
36 X 2
280
300
2,100
16.7
-20 ~ +95℃
10 ~ 1,000 cSt
47
Oil temperature range Oil viscosity range
T5VP2D36
kgf
Dimensions D3
d
L1
L2
L3
L4
L5
L6
L7
L8
L9
L10
L11
T5VP2D28 146 101.6 175
Model
D1
D2
14
106
97
104
95
5
44
14.5
95
203
45
346 93.5 181.5
T5VP2D36
14 122.5 133 115.5 123
8
127
181
L12
L13
L14
58.8 16.5 110 230.2 73.5 322.7 133 182.2 200.2
Dimensions of shaft end Model
no. of teeth
Pressure angle
Module
major diameter
minor diameter
Rule
T5VP2D28
13
30°
16/32
ø21.8mm
ø18.63mm
SAE
T5VP2D36
14
35°
12/24
ø31.2mm
ø26.99mm
SAE
Flange mounting face for suction port Model
a
b
e
e-DEPTH
L16
T5VP2D28
37.5
69.9
40
M-12-18
177.5
T5VP2D36
50.8
88.9
55
M-12-15
200.2
Flange mounting face for delivery port Port size
g
h
L18
L20
L19
O-ring
PF 3/4
ø45
ø29.8
2.5
3.5
20
P24
PF 3/8
ø28
ø18.6
2.0
2.5
15
P14
PF 1/2
ø34
ø22.6
2.5
2.5
19
P18
PF 1/4
ø24
ø15.6
1.5
2.5
15
P11
Hydraulic Piston Motor TM Series
•Head office
456-3, Nae-dong Changwon, Gyungnam, Korea (Zip code : 641-050) Telephone. +82-55-269-5310, 5311 Telefax. +82-55-269-5222 E-mail. jongho.ahn@doosan.com •Europe office TongMyung Engineering Europe GmbH Werftstr 17 D-40549 Dusseldorf Germany Telephone. +49-211-569-2765 Telefax. +49-211-569-2766 E-mail. robert.suh@mottrol.de
DM 002-FEB/09
Hydraulic Piston Motor TM Series
Specification
Piston Motor TM Series Features Piston motor has a variable displacement (two speed) swash plate and incorporates a brake valve and a mechanical brake needed for travelling. TM motor with planetary gear reducer offers outstanding features. Hydraulically balanced piston motor ensures reliable changeover of the displacement by external pilot control (1.5 ~ 2 : 1 speed ratio) The motor offers speed control and braking to minimize shock with a built-in double counterblance valve and shockless relief valve. (These valves are not necessary for a closed circuit.) The mechanical brake is a negative. The brake is automatically activated or released when the stop or start. The case rotation type gear reducer has improved durability and reliablity because of its simple and equally loaded design in addition to high-precision machine parts. The motor uses heavy duty bearings to ensure long life. An efficient floating seal also prevents dust and water from entering into the motor.
Reduction Gear Model
TM07VA TM07VC DM05VA DM06VA DM09VA TM10VD TM10VC TM18VC TM22VC TM24VA TM30VC TM35VA TM40VC TM40VD TM50/60VC TM60VD TM70VC TM70VD TM100VD
Gear Ratio Theoretical Output Torque Output Speed Displacement Output Speed i
kgf m
N m
max rpm
cc/rev
max rpm
53.706 53.706 56.436 56.436 45.970 54.467 53 53 53.706 48 39.14 41.73 48 49.95 63.843 46.127 70.15 54.470 68.23
780 850 663 750 1,100 1,250 1,512 2,151 2,616 2,791 3,488 3,069 4,651 4,651 6,977 7,200 7,558 8,000 10,000
7,651 8,335 6,499 7,755 10,787 12,250 14,823 21,094 25,655 27,366 34,207 39,883 45,609 45,609 68,414 70,607 74,115 78,400 98,060
65 60 90 90 60 70 60 60 60 58 70 50 50 56 40 52 36 45 40
39.8 55.8 33.5 33.5 55.8 55.8 86 86 86 140.5 157.5 183.9 183.9 174.4 195 280 195 280 280
3,900 3,900 4,500 4,500 3,900 3,900 3,200 3,200 3,200 2,800 2,800 2,100 2,400 2,800 2,600 2,400 2,600 2,400 2,700
Hydraulic Motor Max Pressure kgf/cm2 Mpa
300 350 300 300 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350
Brake Torque (at Motor Shaft) kgf m N m
29.4 34.3 29.4 29.4 34.3 34.3 34.3 34.3 34.3 34.3 34.3 34.3 34.3 34.3 34.3 34.3 34.3 34.3 34.3
8.4 8.4 6.3 6.3 8.4 12 19.7 19.7 19.7 40.6 40.6 49.3 49.3 40.6 44.5 87 44.5 87 115.7
82 82 62 62 82 117.6 193 193 193 398 398 483 483 398 436 853 436 853 1,135
Application Weight ton
kgf
5~8 5~8 4~5 5~6 6~8 8~10 8~10 13~18 13~18 13~18 15~20 18~25 18~25 18~25 29~34 29~34 34~37 34~37 45~55
78 80 57 61 82 90 125 136 145 238 230 308 308 276 380 355 380 355 520
Dimensions
Model
A
B
C
D
E
F
G
H
J
K
L
TM07VA TM07VC DM05VA DM06VA DM09VA TM10VD TM10VC TM18VC TM22VC TM24VA TM30VC TM35VA TM40VC TM40VD TM50/60VC TM60VD TM70VC TM70VD TM100VD
340 345 288 288 340 353 389 392 398 481.5 464 540 540 502 569 553 569 553 668
268 268 264 264 280 278 298 308 308 372 372 370 370 370 462 460 462 460 500
306 306 290 290 326 328 362 394 394 432 432 470 470 470 525 525 525 525 586
119 124 92 92 126 120 134 134 124 138 138 171 159 138 175 166 175 166 207
68 68 68 68 80 80 88 99.5 99.5 99.5 99.5 98.5 98.5 98.5 112 112 112 112 130
244 244 240 240 250 250 270 280 280 340 340 340 340 340 425 425 425 425 460
210 210 200 200 210 210 230 246 246 300 300 300 300 300 380 380 380 380 420
250 250 230 230 265 265 292 324 324 362 362 402 402 402 450 450 450 450 510
282 282 262 262 300 300 332 364 364 402 402 440 440 440 490 490 490 490 550
12-M14 X P2.0 12-M14 X P2.0 12-M14 X P2.0 12-M14 X P2.0 12-M16 X P2.0 12-M16 X P2.0 15-M16 X P2.0 20-M16 X P2.0 20-M16 X P2.0 30-M16 X P2.0 30-M16 X P2.0 30-M16 X P2.0 30-M16 X P2.0 30-M16 X P2.0 20-M20 X P2.5 30-M20 X P2.5 26-M20 X P2.5 34-M24 X P3.0 26-M24 X P3.0
12-M14 X P2.0 12-M14 X P2.0 9-M14 X P2.0 9-M14 X P2.0 12-M14 X P2.0 12-M16 X P2.0 12-M16 X P2.0 15-M16 X P2.0 15-M16 X P2.0 24-M16 X P2.0 24-M16 X P2.0 30-M16 X P2.0 30-M16 X P2.0 30-M16 X P2.0 24-M20 X P2.5 28-M20 X P2.5 24-M20 X P2.5 32-M20 X P2.5 36-M20 X P2.0
M
N
P
PF1/2 PF3/8 PF1/4 PF1/2 PF3/8 PF1/4 3/4-16UNF 9/16-18UNF 9/16-18UNF 3/4-16UNF 9/16-18UNF 9/16-18UNF PF1/2 PF3/4 PF3/4 PF3/4 PF1, PF3/4 PF1, PF3/4 SAE 1” SAE 1” SAE 1” SAE 1” SAE 1” SAE 1” SAE 1” SAE 1-1/4”
PF3/8 PF1/2 PF1/2 PF1/2 PF1/2 PF1/2 PF1/2 PF1/2 PF1/2 PF1/2 PF1/2 PF1/2 PF1/2 PF1/2
PF1/4 PF1/4 PF1/4 PF1/4 PF1/4 PF1/4 PF1/4 PF1/4 PF1/4 PF1/4 PF1/4 PF1/4 PF1/4 PF1/4
Logística e Ingeniería de México_____
Gracias por la atención a la presente Logística e Ingeniería de México_______________________ Ing. Gustavo González V. Corporativo Periférico Sur 3915 CP 14010 México, DF. Tel. 01 (55) 57 14 98 07 Cel. 55 59 30 44 99 / 270 846 16 http://www.wix.com/gustavovic/lei-servicios-logisticos http://www.wix.com/gustavovic/catalogolei gustavovic@yahoo.com; logisticaeingenieria@ymail.com; mvicent@ymail.com;
http://www.facebook.com/gustavo.vicent