FPO
FPO
PRODUCT CATALOG
FPO
YOUR SOURCE FOR HIGH QUALITY HYDRAULIC VANE PRODUCTS
Index 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
Introduction Vane Pumps V10/V20 V10F/NF & V20/NF Pumps Vane Pumps V2010/V2020 V & VQ Single Vane Pumps (10 & 12 Vane Design) V & VQ Double Vane Pumps (10 & 12 Vane Design) VTM Pumps Triple Vane Pumps Triple Vane Pumps 20VQ, 25VQ Cartridge Kits 30VQ, 35VQ, 45VQ Cartridge Kits 20V, 25V Cartridge Kits 35V, 45V Cartridge Kits Components Shafts Seal Kits/Seal Packs Warranty Policy
FPO
FPO
The Product information, specifications and descriptions contained in this catalog are subject to change without notice. All manufacturers names, numbers and descriptions are used for reference only. It is not implied any part listed is the product of any particular manufacturer.
FPO
2
Introduction About Our Company FPO
Our origins date back to 1952, when our founder and chairman pioneered aftermarket parts for off-highway construction equipment. During the 60, 70 and 80’s, we designed and built asphalt paving equipment and road graders and operated facilities in Canada, Belgium, Portugal and Singapore. By the late 80’s, when our Company was acquired by Ingersoll-Rand, we had stocking dealers in over 60 countries worldwide. In the early 90’s, we began to manufacture hydraulic vane products in Italy and as our sales expanded we began to expand our production to North America and other overseas countries. In December 1999, Metaris acquired a manufacturing base in Forest, Mississippi, allowing us to expand our product line to include replacement gear pumps and components, which are totally interchangeable with Commercial Intertech along with a large shaft production capability. Today, Metaris builds vane and gear pumps in both our Toronto and Forest operations and maintains a parts depot in Reno, Nevada. To service our growing customer base in Europe, the Middle East and Africa, Metaris has recently established an office in England.
FPO
FPO
Metaris is capable of cross referencing Caterpillar and Vickers part numbers for all vane pump, cartridges and components.
3
Vane Pumps V10/V20 Model & Series
Ring Size delivery US gpm @1200 RPM & 100psi (LPM @ 1200 RPM & 7 Bar
Max. Speed r/min
Displacement In 3/r (cm 3/r)
Typical input power hp (KW) @ max. speed & pressure
Typical delivery US gpm (L/min) @ max. speed & pressure
Max. Pressure psi (bar)
FPO
Weight lb (kg)
V10
1 2 3 4 5 6 7
(3.79) (7.58) (11.4) (15.1) (18.9) (22.7) (26.4)
0.20 0.40 0.60 0.80 1.00 1.19 1.39
(03,3) (06,6) (09,8) (13,1) (16,4) (19,5) (22,8)
4800 4500 4000 3400 3200 3000 2800
2500 2500 2500 2500 2500 2500 2500
(172) (172) (172) (172) (172) (172) (172)
3.60 7.30 9.40 10.9 12.8 14.6 16.0
(13,6) (27,6) (35,6) (41,3) (48,5) (55,3) (60,6)
07.0 13.6 17.8 20.4 22.8 26.0 28.0
(05,2) (10,1) (13,3) (15,2) (17,0) (19,4) (20,7)
10 - 15 (4,5 - 6,8)
V20
6 7 8 9 11 12 13
(22.7) (26.4) (30.2) (34.0) (41.6) (45.4) (49.2)
1.19 1.39 1.62 1.81 2.22 2.38 2.59
(19,5) (22,8) (26,5) (29,7) (36,4) (39,0) (42,4)
3400 3000 2800 2800 2500 2400 2400
2500 2500 2500 2500 2500 2500 2500
(172) (172) (172) (172) (172) (172) (172)
16.1 16.7 17.7 19.8 22.9 23.0 25.9
(60,9) (63,2) (67,0) (75,0) (86,7) (87,1) (98,0)
29.0 29.5 32.5 35.5 37.5 38.5 42.0
(21,6) (22,0) (24,2) (26,5) (28,0) (28,5) (31,0)
16 - 18 (7,3 - 8,2)
Based on using petroleum oil at 120°F(49°C), viscosity 150 SUS at 100°F (32 cSt at 38°C), and 0 psi inlet pressure.
Single Pump ordering, operating specifications F3 - V10 - 1 P 5 S - 1 C 20 L 1
4
2
3
4
5
6
1
Viton Seal Omit if not required
2
Pump & Series 10 or 20
3
Mounting 1 - 2-bolt flange, 3.25” pilot (Standard) 6 - 2-bolt flange, 4.00” pilot (Optional)
4
Inlet port connections P - 1” NPT Thread (V10 only) 1” NPT Thread (V20 only) S - 1.3125 - 12 Straight thread (V10 only) 1.625 - 12 Straight thread (V20 only)
5
Ring Size (Delivery at 1200 r/min and 100 psi) V10 - 1-7 gpm V20 - 6-13 gpm
6
Outlet port connections P - 1/2” NPT thread (V10 only) 1.1875-12 Straight thread (V20 only) S - .750-16 Straight thread ( V10 only) 1.0625-12 Straight thread (V20 only)
7
8
9
FPO
10
7
Shaft 1 - Straight Keyed 11 - Splined 38 - Splined
8
Position of outlet port (Viewed from cover end of pump) A - Opposite inlet port B - 90° CCW from inlet C - Inline wth inlet D - 90° CW from inlet
9
Design
10
Shaft rotation (Viewed from the shaft end of the pump) L - Left handed (counterclockwise) Omit for right hand
FPO
V10F/NF & V20F/NF Vane Pumps FPO
Series
Delivery US gpm @1200 rpm 7bar (100 psi)
Displ. cm 3/r (in 3/r)
Max. r/min
Wt. (lb.) kg.
V10F
1 2 3 4 5 6 7
3,3 6,6 9,8 13,1 16,4 19,5 22,8
(.20) (.40) (.60) (.80) (1.00) (1.19) (1.39)
4800 4500 4000 3400 3200 3000 2800
10 - 15 (4,5 - 6,8)
V20F
6 7 8 9 11 12 13
19,5 22,8 26,6 29,7 36,4 39 42,5
(1.19) (1.39) (1.62) (1.81) (2.22) (2.38) (2.59)
3400 3000 2800 2800 2500 2400 2400
16 - 18 (7,3 - 8,2)
Double Pump ordering, operating specifications FPO
F3 - V10 F - 1 P 5 P - 1 C 4G L 1
2
3
4
6
7
8
9
10
11
1
Viton Seal Omit if not required
8
Shafts
2
Pump & Series 10 or 20
9
3
Integral Valve Options F - Flow control
4
Mounting 1 - 2 bolt flange (SAE “A” Size)
Position of outlet port (Viewed from cover end of pump) A - Opposite inlet port B - 90° CCW from inlet C - Inline wth inlet D - 90° CW from inlet
5
Inlet port connections V-10F/NF Model P - 1.3123” 12-Straight Thread S - 1.1875” 12-Straight Thread B - British Straight Parallel Pipe
10 Integral Valving
V20 Model Series P - 1 1/4” NPT Thread S - 1.625 12-Straight Thread
6
Ring Size Cam Ring Size & Rate Flow (@ 1200 rpm and 100 psi ) V10 - 1-7 gpm V20 - 7-13 gpm
7
Outlet port connections Code Std. Cover
FPO
5
P R S T Y
.50” NPT thd. (V10) 3/4” NPT thd. (V20) 1.062”-12 St. thd. (V10) .750”-16 St. thd. (V10) 1.062”-12 St. thd. (V20) .875” - 14 St. thd.
Flow Port Cover Pressure
Tank
3/4”-16 St. thd. (V10F & V20F) 3/4”-16 St. thd. (V20F) 3/4”-16 St. thd. (V10F) -
1/2” NPT thd. 1-1/16”-12 St. thd. (V20F) 3/4”-16 St. thd. (V10F) -
Orifice No.
Flow Rate in GPM (LPM)
Relief Valve Setting PSI (Bar)
2 3 4 5 6 7 8 9 10 11 12
2 gpm (7.5) 3 gpm (11.3) 4 gpm (15.1) 5 gpm (18.9) 6 gpm (22.7) 7 gpm (26.5) 8 gpm (30.2) 9 gpm (34.0) 10 gpm (37.8) 11 gpm (41.6) 12 gpm (45.4)
A – 2500 PSI (17.2) B - 500 PSI (34.5) C – 750 PSI (513.7) D – 1000 PSI (69) E - 1250 PSI (86.2) F – 1500 PSI (103.5) G – 1750 PSI (120.7) H – 2000 PSI (138) J – 2250 PSI (155.2) K – 2500 PSI (172.5)
-
11 Shaft rotation
(As viewed from the shaft end of the pump) L - Left handed (counterclockwise) Omit for right hand
5
Vane Pumps V2010/V2020 Shaft End
Cover End
Ring Size gpm @1200 RPM & Model 100psi & Series (LPM @ 1200 Weight RPM & 7 lb (kg) Bar)
Ring Size gpm @1200 RPM & 100psi (LPM @ 1200 RPM & 7 Bar)
V2010 30 (13/6)
V2020 30 (13/6)
Displ. cu.in/r (cm 3/r)
Max. rpm
Max. psi (bar)
Typical delivery US gpm (L/min) @ max. speed & pressure
Typical input hp (KW) @max. speed & pressure
FPO
Displ. cu.in/r (cm 3/r)
Max. rpm
Max. psi (bar)
Typical delivery US gpm (L/min) @ max. speed & pressure
Typical input hp (KW) @max. speed & pressure
6 7 8 9 11 12 13
(22.7) (26.4) (30.2) (34.0) (41.6) (45.4) (49.2)
1.19 (19,5) 1.39 (22,8) 1.62 (26,5) 1.81 (29,7) 2.22 (36,4) 2.38 (39,0) 2.59 (42,4)
3000 3000 2800 2800 2500 2400 2400
2500 (172) 2500 (172) 2500 (172) 2500 (172) 2500 (172) 2200 (152) 2200 (152)
14.5 (54,9) 16.5 (62,5) 17.5 (66,2) 20.0 (75,7) 23.0 (87,1) 23.0 (87,1) 26.0 (98,4)
24.5 (18,3) 30.0 (22,4) 32.5 (24,2) 36.0 (26,8) 37.5 (28,0) 36.0 (26,8) 39.0 (29,1)
1 2 3 4 5 6 7
(3.79) (7.58) (11.4) (15.1) (18.9) (22.7) (26.4)
3.3 6.6 9.8 0.80 1.00 1.19 1.39
(,20) (,40) (,60) (13,1) (16,4) (19,5) (22,8)
3000 3000 3000 3000 3000 3000 2800
2500 (172) 2500 (172) 2500 (172) 2500 (172) 2500 (172) 2500 (172) 2500 (172)
2.0 (7,6) 4.7 (17,8) 7.0 (26,5) 9.5 (36,0) 12.0 (45,4) 14.5 (54,9) 16.0 (60,6)
4.5 9.0 13.4 18.0 21.5 24.5 24.0
(3,4) (6,7) (10,0) (13,4) (16,0) (18,3) (17,9)
6 7 8 9 11 12 13
(22.7) (26.4) (30.2) (34.0) (41.6) (45.4) (49.2)
1.19 (19,5) 1.39 (22,8) 1.62 (26,5) 1.81 (29,7) 2.22 (36,4) 2.38 (39,0) 2.59 (42,4)
3000 3000 2800 2800 2500 2400 2400
2500 (172) 2500 (172) 2500 (172) 2500 (172) 2500 (172) 2200 (152) 2000 (132)
14.5 (54,9) 16.5 (62,5) 17.5 (66,2) 20.0 (75,7) 23.0 (87,1) 23.0 (87,1) 26.0 (98,4)
24.5 (18,3) 30.0 (22,4) 32.5 (24,2) 36.0 (26,8) 37.5 (28,0) 36.0 (26,8) 39.0 (26,4)
6 7 8 9 11
(22.7) (26.4) (30.2) (34.0) (41.6)
1.19 (19,5) 1.39 (22,8) 1.62 (26,5) 1.81 (29,7) 2.22 (36,4)
3000 3000 2800 2800 2500
2500 (172) 2500 (172) 2500 (172) 2500 (172) 2500 (172)
14.5 (54,9) 16.5 (62,5) 17.5 (66,2) 20.0 (75,7) 23.0 (87,1)
26.0 30.0 32.5 36.0 7.5
(19,4) (22,4) (24,2) (26,8) (28,0)
FPO
Based on using petroleum oil at 120°F(49°C), viscosity 150 SUS at 100°F (32 cSt at 38°C), and 0 psi inlet pressure
Double Pump ordering, operating specifications F3 - V2010 - 1 F 13 S 3 S - 1 CC 12 L 1
3
4
5
1
Viton Seal Omit if not required
2
Vane Pump & Series 2010 or 2020
3
Mounting 1 - 2-bolt flange, 4.00” pilot (Standard) 6 - 2-bolt flange, 3.25” pilot (Optional)
4
Inlet port connections F - 4-bolt flange 1.50 dia (V2010) 2.00 dia (V2020)
5
Ring Size (Shaft-end Pump) (Delivery at 1200 r/min and 100 psi) 6 - 13 gpm
6
6
2
No. 1 outlet port (shaft end) S - .750 - 16 straight thread (V2010) 1.062 - 12 straight thread (V2020)
6
9
10
11
12
7
8
7
Ring size (cover-end pump) (Delivery at 1200 r/min and 100 psi) V10 - 1-7 gpm V20 - 6-11 gpm
8
No. 2 outlet port (cover end) S - .750 - 16 straight thread (V2010) 1.062 - 12 straight thread (V2020)
9
Shaft 1 - Straight Keyed 11 - Splined
10
Position of outlet (Viewed from cover end of pump)
11
Design
12
Shaft rotation L - Left handed for counterclockwise Omit for right hand
FPO
V & VQ Single Vane Pumps (10 & 12 Vane Design) FPO
Model & Series
Ring Size - gpm @1200 RPM & 100psi (LPM @ 1200 RPM & 7 Bar
Displacement cu.in/rev (cm3/rev)
Max. rpm VQ Series
Max. psi (bar) VQ Series
Max. rpm V-Series
Max. psi (bar) V-Series
Weight lb (kg)
25
12 14 17 21
(45,5) (53,1) (64,4) (79,6)
02.45 (40) 02.77 (45) 03.37 (55) 04.12 (67)
2700 2700 2500 2500
3000 3000 3000 3000
(210) (210) (210) (210)
1800 1800 1800 1800
3000 (207) 3000 (207) 3000 (207) 3000 (207)
32 (14,8)
35
25 30 35 38
(94,8) (113,7) (132,6) (144,0)
04.98 (81) 05.96 (97) 06.88 (112) 07.42 (121)
2500 2500 2400 2400
3000 3000 3000 3000
(210) (210) (210) (210)
1800 1800 1800 1800
3000 (207) 3000 (207) 3000 (207) 3000 (207)
50 (22,7)
45
42 50 60
(159,2) (189,5) (227,4)
08.46 (138) 09.90 (162) 11.80 (193)
2200 2200 2200
2500 (175) 2500 (175) 2500 (175)
1800 1800 1800
3000 (207) 3000 (207) 3000 (207)
75 (34)
Based on using petroleum oil at 120°F(49°C), viscosity 150 SUS at 100°F (32 cSt at 38°C), and 0 psi inlet pressure.
FPO
Double Pump ordering, operating specifications 25 VQ 12 - A - 1 - CC - 20 (L) 1
2
3
4
5
6
1
Series
4
Port Connection
7
Design Number
2
V - Industrial VQ - Mobile
5
Shaft
8
Rotation
6
Port Positions
3
V - Industrial
Vane Pump Series FPO
25V/VQ 35V/VQ 45V/VQ 2520V/VQ 3520V/VQ
3525V/VQ 4520V/VQ 4525V/VQ 4535V/VQ
7
8
When Ordering please specify: • Pump rotation • Port position • Cartridge gallonage • Viton/Nitrile • Single/Double seal • Shaft Code
7
V & VQ Double Vane Pumps (10 & 12 Vane Design) Shaft End
Cover End FPO
Model & Series
Ring Size gpm @1200 RPM & 100psi (LPM @ 1200 RPM & 7 Bar)
Ring Size gpm @1200 RPM & 100psi (LPM @ 1200 RPM & 7 Bar)
Displ. cu.in/r (cm 3/r)
Max. rpm VQ Series
Max. psi (bar) VQ Series
Max. rpm V Series
Max. psi (bar) V Series
Displ. cu.in/r (cm 3/r)
Max. rpm VQ Series
Max. psi (bar) VQ Series
Max. rpm V Series
Max. psi (bar) V Series
12 (45,5) 14 (53,1) 17 (64,4) 21 (79,6)
02.45 (40) 02.76 (45) 03.37 (55) 04.12 (67)
2700 2700 2700 2700
3000 (210) 3000 (210) 3000 (210) 3000 (210)
1800 1800 1800 1800
2500 (172) 2500 (172) 2500 (172) 2500 (172)
05 (19,0) 08 (30,3) 11 (41,7) 12 (45,5) 14 (53,0)
1.10 (18) 1.67 (27) 2.22 (36) 2.41 (39) 2.80 (46)
2700 2700 2700 2700 2700
3000 (210) 3000 (210) 3000 (210) 2300 (160) 2000 (140)
1800 1800 1800 1800 1800
3000 (207) 3000 (207) 3000 (207) 3000 (207) 3000 (207)
25 (94,8) 30 (113,7) 35 (132,6) 38 (144,0)
04.98 (81) 05.96 (97) 06.88 (112) 07.42 (121)
2500 2500 2400 2400
3000 (210) 3000 (210) 3000 (210) 3000 (210)
1800 1800 1800 1800
2500 (172) 2500 (172) 2500 (172) 2500 (172)
05 (19,0) 08 (30,3) 11 (41,7) 12 (45,5) 14 (53,0)
1.10 (18) 1.67 (27) 2.22 (36) 2.41 (39) 2.80 (46)
2500 2500 2500 2500 2500
3000 (210) 3000 (210) 3000 (210) 2300 (160) 2000 (140)
1800 1800 1800 1800 1800
3000 (207) 3000 (207) 3000 (207) 3000 (207) 3000 (207)
25 (94,8) 30 (113,7) 76 (34,5) 35 (132,6) 38 (144,0)
04.98 (81) 05.96 (97) 06.88 (112) 07.42 (121)
2500 2500 2400 2400
3000 (210) 3000 (210) 3000 (210) 3000 (210)
1800 1800 1800 1800
2500 (172) 2500 (172) 2500 (172) 2500 (172)
12 (45,5) 14 (53,0) 17 (64,4) 21 (79,6)
2.45 (40) 2.76 (45) 3.37 (55) 4.12 (67)
2500 2500 2500 2500
3000 (210) 3000 (210) 3000 (210) 3000 (210)
1800 1800 1800 1800
2500 (172) 2500 (172) 2500 (172) 2500 (172)
4520
08.46 (138) 09.90 (162) 11.80 (193)
2200 2200 2200
2500 (175) 2500 (175) 2500 (175)
1800 1800 1800
2500 (172) 2500 (172) 2500 (172)
05 (19,0) 08 (30,3) 11 (41,7) 12 (45,5) 14 (53,0)
1.10 (18) 1.67 (27) 2.22 (36) 2.41 (39) 2.80 (46)
2200 2200 2200 2200 2200
3000 (210) 3000 (210) 3000 (210) 2300 (160) 2000 (140)
1800 1800 1800 1800 1800
3000 (207) 3000 (207) 3000 (207) 3000 (207) 3000 (207)
Weight lb (kg) 2520 45 (20)
3520 77 (34)
3525
94 (43)
42 (159,2) 50 (189,5) 60 (227,4)
4525
42 (159,2) 50 (189,5) 101 (46) 60 (227,4)
08.46 (138) 09.90 (162) 11.80 (193)
2200 2200 2200
2500 (175) 2500 (175) 2500 (175)
1800 1800 1800
2500 (172) 2500 (172) 2500 (172)
12 (45,5) 14 (53,0) 17 (64,4) 21 (79,6)
2.45 (40) 2.76 (45) 3.37 (55) 4.12 (67)
2200 2200 2200 2200
3000 (210) 3000 (210) 3000 (210) 3000 (210)
1800 1800 1800 1800
2500 (172) 2500 (172) 2500 (172) 2500 (172)
4535
08.46 (138) 09.90 (162) 11.80 (193)
2200 2200 2200
2500 (175) 2500 (175) 2500 (175)
1800 1800 1800
2500 (172) 2500 (172) 2500 (172)
25 (94,8) 30 (113,7) 35 (132,6) 38 (144,0)
4.98 (81) 5.96 (97) 6.88 (112) 7.42 (121)
2200 2200 2200 2200
3000 (210) 3000 (210) 3000 (210) 3000 (210)
1800 1800 1800 1800
2500 (172) 2500 (172) 2500 (172) 2500 (172)
42 (159,2) 50 (189,5) 118 (54) 60 (227,4)
FPO
Based on using petroleum oil at 120째F(49째C), viscosity 150 SUS at 100째F (32 cSt at 38째C), and 0 psi inlet pressure.
Double Pump ordering, operating specifications 3525 VQ 35 A 17 S - 1 - CC - 20 (L) 1
8
2
3
4
5
6
7
1
Series
6
Mounting
2
V - Industrial VQ - Mobile
7
Shaft Code
8
Port Position
9
Design
10
Rotation
3
Shaft End gpm
4
Port Connection
5
Cover End gpm
8
9
10
FPO
VTM Pumps Delivery GPM @ 1200 RPM 100 PSI
Displacement cu.in/rev
Max. Speed - Rpm @ 100 PSI
Max. Speed - Rpm @ 1500 PSI
Max. Speed - Rpm @ 2000 PSI
Max. Pressure PSI
VTM28
1 1.5 2 4 5 6
.21 .31 .38 .79 .96 1.18
7000 7000 7000 7000 6000 5000
5000 4500 4200 2800 2600 2500
-
1500 1500 1500 1500 1500 1500
14
VTM42
1 1.5 2 4 5 6
.21 .31 .38 .79 .96 1.18
7000 7000 7000 7000 6000 5000
5000 4500 4200 2800 2600 2500
4250 4000 3800 2800 2300 2000
2000 2000 2000 2000 2000 2000
14
FPO
Model & Series
Approx. Weight lbs.
Pump ordering, operating specifications VT M 42 - 60 - 20 - T5 - (F) (S) ** - *1 - 14 1
2
3
4
5
6
7
8
9
10
11
FPO
1
Vane Type
2
Mobile Application
3
Series 42
4
Capacity 10 - 1.0 US GPM 15 - 1.5 US GPM 20 - 2.0 US GPM 40 - 4.0 US GPM 50 - 5.0 US GPM 60 - 6.0 US GPM
5
FPO
Controlled Flow (1500 rpm @ 100 psi) 07 - 0.7 US GPM 15 - 1.5 US GPM 20 - 2.0 US GPM 25 - 2.5 US GPM 30 - 3.0 US GPM 35 - 3.5 US GPM 40 - 4.0 US GPM 45 - 4.5 US GPM 50 - 5.0 US GPM 55 - 5.5 US GPM 60 - 6.0 US GPM 65 - 6.5 US GPM 75 - 7.5 US GPM
6
Relief Valve Setting 02 - 250 psi 03 - 300 psi 05 - 500 psi 07 - 750 psi 08 - 850 psi 10 - 1000 psi 12 - 1250 psi 15 - 1500 psi 17 - 1750 psi 20 - 2000 psi 35 - 3500 psi
7
Filter Parts
8
Inlet Screen
9
Pump Rotation (Viewed from Shaft End) R - Clockwise L - Counterclockwise
10 Shaft No. 1
For satisfactory service life of these components in industrial applications, use full flow filtration to provide fluid which meets ISO cleanliness code 18/15 or cleaner. Selections from Vickers OFP, OFR, and OFRS series are recommended.
Caterpillar Pumps Here are just a few of the Caterpillar pumps we can supply.
9J5050 9J5070 9J5053 3G7640 9J5075 9J5048 3G5810
9J8182 9J8195 3G7636 9J5080 9J5051 9TO486
Contact our Sales Department with your Caterpillar number and we will do the rest.
11 Design
9
Triple Pumps 2520 VQV10 Triple Pump
FPO
F3 2520VQ S V10 S 17 A 8 S 3 - S 297 B C A 4 G - 20 R 1
2
3
4
5
6
7
8
9 10
11
12
13 14 15 16 17
18
19
1
F3 - Viton seal (Omit if not required)
13
Outlet port position – No. 1 (see table below)
2
Double Pump Series
14
Outlet port position - No. 2
3
SAE Mounting
15
Outlet port position - No. 3
4
Single Pump series
5
Cover option for V10 pump S – Standard Cover, F – Integral Flow & relief valve
6
SAE rate Flow, Shaft –End Pump 12 gpm, 14 gpm, 17 gpm, 19 gpm, 21 gpm
7
Double pump port connection A – All SAE 4 bolt flange
8
SAE rate flow, Center Pump 5 gpm, 8 gpm, 9 gpm, 11 gpm, 12 gpm, 14 gpm
9
Outlet port connection – No. 3 Standard Cover S - .750 – 16 st. thd. Flow Control Cover T - .750 – 16 st. thd, control port & Tank
Position viewed from cover end Opposite inlet 135 CCW from inlet 90 CCW from inlet 45 CCW from inlet Inline with inlet 45 CW from inlet 90 CW from inlet 135 CW from inlet
Control flow rate, V10F - only (Omit for standard cover) 3 gpm - 11 L/min 6 gpm - 23 L/min 4 gpm - 15 L/min 7 gpm – 27 L/min 5 gpm - 19 L/min 8 gpm - 30 L/min
17
Relief valve setting - V10F only A – 17 bar (250 PSI) F – 100 bar (1500 PSI) B – 35 bar (500 PSI) G – 121 bar (1750 PSI) C- 52 bar (750 PSI) H – 140 bar (2000 PSI) D – 70 bar (1000 PSI) J – 155 bar (2250 PSI) E – 86 bar (1250 PSI) K – 175 bar (2500 PSI)
1 – 7 gpm 11 Shaft Seal
S – Double, Blank – Single seal 277 – SAE B Spline, 297 – SAE BB Spline
No. 2 A B C D
16
10 SAE rate flow, cover end pump
12 Shaft
No 1 A B C D -
18
Design - 20
19
Shaft rotation (Viewed from the shaft end of pump) L – Left hand (counter clockwise), R – Right hand
No. 3 A B C D -
FPO
3525 VQV10 Triple Pump (F3) - 3525VQ S V10 * - * * * * * - * * * * * * * - 20 * 1
2
3
4
5
1
Special seals F3 - Vition “O” Rings and shaft seals
2
Pump series designation 35**VQ - Shaft end pump **25VQ - Center pump
3
Body mounting flange S - SAE mounting per J-744 101-2
4
Pump series designation V10 cover end pump
10
6
5
6
7
8
9 10
11 12 13 14 15 16 17
V10 pump cover options S - Standard cover F - Flow control and relief cover P - Priority valve and relief cover SAE rated capacity (VQ shaft - end cartridge) 21 - 21 USgpm 35 - 35 USgpm 25 - 25 USgpm 38 - 38 USgpm 30 - 30 USgpm
18
8
9
19
Rated capacity (VQ center cartridge) 12 -12 USgpm 14 - 14 USgpm 17 - 17 USgpm
19 - 19 USgpm 21 - 21 USgpm
V10 port connections V10s standard covers and outlet #3 S - 750 - 16 Str/ thd. Y - .875 - 14 Str. thd. P - 1/2” - NPT thd. R - 1.062 - 12 Str. thd. FPO
7
VQ port connections (inlet & outlet #1 & #2) A - 4 bolt flange (inch threads)
V10F flow/relief control cover T - .750 - 16 Str. thd. .750 - 16 Str. thd. P - .750 - 16 Str. thd. 1/2” - NPT thd.
Triple Pumps FPO
4535 VQV10 Triple Pump (F3) - 4535VQ S V10 * - * * * * * - * * * * * * * - 20 * 1
1
2
3
4
5
6
FPO
7
8
2
3
4
5
Special seals F3 - Vition “O” Rings and shaft seals Pump series designation 45**VQ - Shaft end pump **35VQ - Center pump Body mounting flange S - SAE mounting per J-744 101-2
6
7
8
9 10
11 12 13 14 15 16 17
14 Port orientation (Outlet #2)
V10S standard covers and outlet #3 S - .750 - 16 Str. thd. P - 1/2” - NPT thd. Y - .875 - 14 Str. thd. R - 1.062 - 12 Str. thd.
Pump series designation V10 cover end pump V10 pump cover options S - Standard cover F - Flow control and relief cover P - Priority valve and relief cover
V10P priority control covers Primary Secondary Port Str. thd. Port Str. thd. K - .5625-18 .750-16
VQ port connections (inlet & outlet #1 & #2) A - 4 bold flange (inch threads) AM - 4 bolt flange (metric threads)
19
9 V10 port connections
V10F flow/relief control cover Outlet #3 Tank Port T - .750 - 16 Str. thd. .750 - 16Str. thd. P - .750 - 16 Str. thd. 1/2” - NPT thd.
SAE rated capacity (VQ shaft - end cartridge) 42 - 42 USgpm 57 - 57 USgpm 47 - 47 USgpm 60 - 60 USgpm 50 - 50 USgpm
18
Tank Port Str. thd. .5625-18
15 Port orientation
(Outlet #3 or primary outlet) (Viewed form cover end of pump; refer to table on next page) 16 Controlled flow rate, V10F & V10P
(Omit for standard cover) 3 - 3 USgpm 6 - 6 USgpm 4 - 4 USgpm 7 - 7 USgpm 5 - 5 USgpm 8 - 8 USgpm 17 Relief valve pressure setting,
10 SAE rated capacity
(V10 cover end cartridge) 1 - 1 USgpm 5 - 5 USgpm 2 - 2 USgpm 6 - 6 USgpm 3 - 3 USgpm 7 - 7 USgpm 4 - 4 USgpm 11 Shaft seal
SAE rated capacity (VQ center cartridge) 21 - 21 USgpm 35 - 35 USgpm 25 - 25 USgpm 38 - 38 USgpm 30 - 30 USgpm
(Viewed form cover end of pump; refer to table on next page)
Blank - Single seal S - Double seal 12 Shaft type
297 - All Series
V10F & V10P (Omit for standard cover) A - 250 psi F - 1500 psi B - 500 psi G - 1750 psi C - 750 psi H - 2000 psi D - 1000 psi J - 2250 psi E - 1250 psi K - 2500 psi 18 Design (Subject to change) 19 Rotation
(Viewed form shaft end of pump) L - Left hand for counterclockwise R - Right hand for clockwise
13 Port orientation (Outlet #1)
(Viewed from cover end of pump; refer to table on next page)
V10P priority control covers Primary Secondary Port Str. thd. Port Str. thd. K - .5625-18 .750-16
13 Port orientation (Outlet #1)
Tank Port Str. thd. .5625-18
10 SAE rated capacity (V10 Cover end cartridge)
1 - 1 USgpm 2 - 2 USgpm 3 - 3 USgpm 4 - 4 USgpm FPO
11 Shaft seal
Blank - Single seal S - Double seal 12 Shaft type
297 - All series
5 - 5 USgpm 6 - 6 USgpm 7 - 7 USgpm
(Viewed from cover end of pump; refer to table on next page) 14 Port orientation (Outlet #2)
(Viewed from cover end of pump; refer to table on next page) 15 Port orientation (Outlet #3 or primary outlet)
(Viewed from cover end of pump; refer to table on next page) 16 Controlled flow rate, V10F & V10P
(Omit for standard cover) 3 - 3 USgpm 6 - 6 USgpm 4 - 4 USgpm 7 - 7 USgpm 5 - 5 USgpm 8 - 8 USgpm
17 Relief valve pressure setting,
V10F & V10P (Omit for standard cover) A - 250 psi F - 1500 psi B - 500 psi G - 1750 psi C - 750 psi H - 2000 psi D - 1000 psi J - 2250 psi E - 1250 psi K - 2500 psi 18 Design (Subject to change) 19 Rotation
(Viewed from shaft end of pump) L - Left hand for counterclockwise R - Right hand for clockwise
11
VQ Replacement Cartridge Kits 20VQ Series Part Number MPN-00101 MPN-00102 MPN-00103 MPN-00104 MPN-00105 MPN-00106 MPN-00107 MPN-00108 MPN-00109 MPN-00110 MPN-00111 MPN-00112
Description 20VQ05 gpm 20VQ05 gpm - Viton 20VQ08 gpm 20VQ08 gpm - Viton 20VQ09 gpm 20VQ09 gpm - Viton 20VQ11 gpm 20VQ11 gpm - Viton 20VQ12 gpm 20VQ12 gpm - Viton 20VQ14 gpm 20VQ14 gpm - Viton
FPO
Vickers # 417053 421588 417054 421589 423096 423097 416427 423097 416428 421590 416429 421592
20VQ Series Specifications Displacement
6 lbs Cu.in./rev. (cc/ rev.)
5
8
11
12
14
1.1 (18)
1.7 (27)
2.2 (36)
2.4 (39)
2.8 (46)
Max. Pressure
Continuous psi (Bar)
3000 (206)
3000 (206)
3000 (206)
2300 (159)
2000 (138)
Min. Speed
Below 1000 psi Above 1000 psi
600 1000
600 1000
600 1000
600 1000
600 1000
Max. Speed, RPM
2700
2700
2700
2700
2700
GPM (Liters/ Min)
11 (43)
17 (64)
23 (86)
23 (86)
24 (90)
Typical Input HP at Max. Speed & Pressure
HP (KW)
25 (18)
32 (24)
49 (37)
32 (24)
36 (27)
25VQ Series Specifications
8 lbs
12
14
17
19
21
Cu.in./rev. (cc/ rev.)
2.4 ( 40)
2.8 ( 45)
3.4 ( 55)
3.7 ( 60)
4.1 (68)
Continuous psi (Bar)
3000 (206)
3000 (206)
3000 (206)
2300 (159)
2000 (138)
Below 1000 psi Above 1000 psi
600 1000
600 1000
600 1000
600 1000
600 1000
2700
2700
2500
2500
2500
GPM (Liters/ Min)
25 (96)
28 (108)
32 (122)
36 (137)
40 (153)
HP (KW)
25 (40)
32 (50)
49 (51)
32 (56)
36 (63)
Typical Flow at Max. Speed & Pressure
*Rotation must be specified when ordering * Also available without Bushing
25VQ Series Part Number MPN-00113 MPN-00114 MPN-00115 MPN-00116 MPN-00119 MPN-00120 MPN-00123 MPN-00124 MPN-00127 MPN-00128
Description 25VQ12 gpm 25VQ12 gpm - Viton 25VQ14 gpm 25VQ14 gpm - Viton 25VQ17 gpm 25VQ17 gpm - Viton 25VQ19 gpm 25VQ19 gpm - Viton 25VQ21 gpm 25VQ21 gpm - Viton
Vickers # 416439 421570 416440 421571 416441 421572 421232 421573 416442 421574
*Rotation must be specified when ordering * Also available without Bushing
Displacement Max. Pressure Min. Speed Max. Speed, RPM Typical Flow at Max. Speed & Pressure Typical Input HP at Max. Speed & Pressure
FPO
FPO
12
VQ Replacement Cartridge Kits FPO
30VQ Series Part Number MPN-00131 MPN-00132 MPN-00133
Description 35VQ21gpm 35VQ25 gpm 35VQ25 gpm - Viton
Vickers # 413420 413421 421583
*Rotation must be specified when ordering * Also available without Bushing
Vickers # 413420 413421 421583 413422 421584 413418 421585 413419 421586 -
35VQ Series Specifications
35VQ Series Part Number MPN-00134 MPN-00135 MPN-00136 MPN-00139 MPN-00140 MPN-00143 MPN-00144 MPN-00147 MPN-00148 MPN-00163
Description 35VQ21gpm 35VQ25 gpm 35VQ25 gpm - Viton 35VQ30 gpm 35VQ30 gpm - Viton 35VQ35 gpm 35VQ35gpm - Viton 35VQ38 gpm 35VQ38 gpm - Viton 35VQ21 gpm - Viton
*Rotation must be specified when ordering * Also available without Bushing
FPO
Displacement
4 lbs Cu.in./rev. (cc/ rev.)
21
25
30
35
38
4.2 (69)
5.0 (82)
6.0 (98)
6.9 (113)
7.4 (122)
Max. Pressure
Continuous psi (Bar)
3000 (206)
3000 (206)
3000 (206)
2300 (206)
2000 (206)
Min. Speed
Below 1000 psi Above 1000 psi
600 1000
600 1000
600 1000
600 1000
600 1000
2500
2500
2500
2400
2400
27 (101)
47 (178)
57 (215)
64 (242)
69 (263)
92 (68)
98 (73)
122 (91)
129 (96)
142 (106)
Max. Speed, RPM Typical Flow at Max. Speed & Pressure
GPM (Liters/ Min)
Typical Input HP at Max. Speed & Pressure
HP (KW)
45VQ Series Part Number MPN-00151 MPN-00151 MPN-00153 MPN-00153 MPN-00155 MPN-00155 MPN-00157 MPN-00157 MPN-00159 MPN-00159
Description 45VQ42 gpm 45VQ42 gpm - Viton 45VQ47 gpm 45VQ47 gpm - Viton 45VQ50 gpm 45VQ50 gpm - Viton 45VQ57 gpm 45VQ57 gpm - Viton 45VQ60 gpm 45VQ60 gpm - Viton
Vickers # 416435 419511 421234 421954 416436 419510 421233 421955 416437 419509
*Rotation must be specified when ordering * Also available without Bushing
45VQ Series Specifications
42
47
50
57
60
Cu.in./rev. (cc/ rev.)
8.5 (69)
9.4 (82)
9.9 (98)
11.2 (113)
11.8 (122)
Max. Pressure
Continuous psi (Bar)
2500 (172)
2500 (172)
2500 (172)
2500 (172)
2500 (172)
Min. Speed
Below 1000 psi Above 1000 psi
600 1000
600 1000
600 1000
600 1000
600 1000
2200
2200
2200
2200
2200
69 (263)
77 (294)
82 (313)
96 (364)
99 (375)
126 (94)
137 (102)
146 (109)
158 (118)
168 (125)
Displacement
22 lbs
Max. Speed, RPM Typical Flow at Max. Speed & Pressure Typical Input HP at Max. Speed & Pressure
GPM (Liters/ Min) HP (KW)
FPO
13
V Series Replacement Cartridge Kits 20V Series Part Number MPN-00901 MPN-00902 MPN-00903 MPN-00904 MPN-00905 MPN-00906 MPN-00907 MPN-00908 MPN-00909 MPN-00910
Description 20V05 gpm 20V05 gpm - Viton 20V08 gpm 20V08 gpm - Viton 20V11 gpm 20V11 gpm - Viton 20V12 gpm 20V12 gpm - Viton 20V14 gpm 20V14 gpm - Viton
FPO
Vickers # 102507 102507 102508 102508 102509 102509 102510 102510 102511 102511
*Rotation must be specified when ordering * Also available without Bushing
20V Series Specifications Displacement
6 lbs Cu.in./rev. (cc/ rev.)
5
8
11
12
14
1.0 (16)
1.5 (25)
2.1 (35)
2.3 (38)
2.7 (44)
Max. Pressure
Continuous psi (Bar)
3000 (206)
3000 (206)
3000 (206)
2500 (172)
2200 (138)
Min. Speed
Below 1000 psi Above 1000 psi
600 1000
600 1000
600 1000
600 1000
600 1000
Max. Speed, RPM
1800
1800
1800
1800
1800
GPM (Liters/ Min)
7 (27)
11 (43)
13 (50)
16 (59)
20 (74)
Typical Input HP at Max. Speed & Pressure
HP (KW)
13 (17)
21 (28)
29 (39)
26 (35)
25 (34)
25V Series Specifications
8 lbs
12
14
17
21
Cu.in./rev. (cc/ rev.)
2.3 (38)
2.7 (44)
3.3 (54)
4.0 (66)
Typical Flow at Max. Speed & Pressure
25V Series Part Number MPN-00911 MPN-00912 MPN-00915 MPN-00916 MPN-00919 MPN-00920 MPN-00923 MPN-00924
Description 25V12 gpm 25V12 gpm - Viton 25V14 gpm 25V14 gpm - Viton 25V17 gpm 25V17 gpm - Viton 25V21 gpm 25V21 gpm - Viton
Vickers # 102532 102532 102533 102533 102534 102534 102535 102535
*Rotation must be specified when ordering * Also available without Bushing
Displacement Max. Pressure
Continuous psi (Bar)
2500 (206)
2500 (206)
2500 (206)
2500 (159)
Min. Speed
Below 1000 psi Above 1000 psi
600 1000
600 1000
600 1000
600 1000
1800
1800
1800
1800
GPM (Liters/ Min)
14 (54)
17 (64)
23 (87)
27 (101)
HP (KW)
26 (35)
31 (42)
37 (50)
46 (62)
Max. Speed, RPM Typical Flow at Max. Speed & Pressure Typical Input HP at Max. Speed & Pressure
FPO
FPO
14
VQ Replacement Cartridge Kits FPO
35V Series Part Number MPN-00927 MPN-00928 MPN-00931 MPN-00932 MPN-00935 MPN-00936 MPN-00939 MPN-00940
Description 35V25 gpm 35V25 gpm – Viton 35V30 gpm 35V30 gpm – Viton 35V35 gpm 35V35 gpm – Viton 35V38 gpm 35V38 gpm – Viton
Vickers # 102552 102552 102553 102553 102554 102554 102555 102555
*Rotation must be specified when ordering * Also available without Bushing
35V Series Specifications Displacement
14 lbs
25
30
35
38
Cu.in./rev. (cc/ rev.)
4.8 (79)
5.8 (95)
6.7 (110)
7.3 (120)
Max. Pressure
Continuous psi (Bar)
2500 (172)
2500 (172)
2500 (172)
2500 (172)
Min. Speed
Below 1000 psi Above 1000 psi
600 1000
600 1000
600 1000
600 1000
Max. Speed, RPM
1800
1800
1800
1800
GPM (Liters/ Min)
32 (27)
40 (43)
48 (50)
51 (59)
HP (KW)
55 (74)
66 (88)
77 (130)
83 (111)
42
50
60
Cu.in./rev. (cc/ rev.)
8.1 (132)
9.6 (158)
11.6 (189)
Max. Pressure
Continuous psi (Bar)
2500 (172)
2500 (172)
2500 (172)
Min. Speed
Below 1000 psi Above 1000 psi
600 1000
600 1000
600 1000
1800
1800
1800
GPM (Liters/ Min)
56 (211)
67 (252)
83 (310)
HP (KW)
92 (123)
109 (146)
131 (176)
Typical Flow at Max. Speed & Pressure Typical Input HP at Max. Speed & Pressure
45V Series
FPO
Part Number MPN-00945 MPN-00925 MPN-00947 MPN-00948 MPN-00949 MPN-00950
Description 45V42 gpm 45V42 gpm – Viton 45V50 gpm 45V50 gpm – Viton 45V60 gpm 45V60 gpm – Viton
Vickers # 102572 102576 102574 102577 102575 102578
*Rotation must be specified when ordering * Also available without Bushing
45V Series Specifications Displacement
Max. Speed, RPM Typical Flow at Max. Speed & Pressure Typical Input HP at Max. Speed & Pressure
FPO
15
Components VQ Rotors Series 20VQ(Short) 20VQ 25VQ 30VQ 35VQ 45VQ
Part # MPN-00401 MPN-00402 MPN-00403 MPN-00408 MPN-00404 MPN-00405
Vickers # 402690 403539 270597 262152 262154 283871
VQ Series Rotors Series 25V 35V 45V
Part # MPN-00989 MPN-00990 MPN-00991
Vickers # 584618 575478 578000
Bearings Series 20VQ Std. 25VQ Std. 26VQ Hvy.Duty 35VQ Std. 45VQ Std.
Part # MPN-01500 MPN-01501 MPN-01502 MPN-01504 MPN-01503
Vickers # 98574 1705 232750 38441 131812
Flex Plate Kits Series Part # Vickers # 20VQ MPN-00345 923955 25VQ MPN-00346 923956 30VQ MPN-00349 923956 35VQ MPN-00347 923953 45VQ MPN-00348 923954 Flex Plates are also available individually
V Series Vane Kits
VQ Vane Kits
Series 25V 35V 45V
Series 20VQ(L) 20VQ 25VQ 30VQ 35VQ 45VQ
Part # MPN-00980 MPN-00981 MPN-00982
Vickers # 941214 941019 941049
V Series Cam Rings Series 25V12 25V14 25V17 25V21 35V25 35V30 35V35 35V38 45V42 45V50 45V60
Part # MPN-01100 MPN-01101 MPN-01102 MPN-01103 MPN-01105 MPN-01106 MPN-01107 MPN-01108 MPN-01110 MPN-01112 MPN-01114
Vickers # 584610 584612 584614 584616 576210 576212 576214 575476 581679 581680 578904
V10 Cam Rings Series V10 #1 V10 #2 V10 #3 V10 #4 V10 #5 V10 #6 V10 #7
Part # MPN-00494 MPN-00996 MPN-43375 MPN-00998 MPN-00999 MPN-01000 MPN-01001
Vickers # 317674 317675 317676 317677 317678 355641 331813
Part # MPN-00701 MPN-00702 MPN-00703 MPN-00704 MPN-00705 MPN-00706
FPO
Vickers # 922741 922743 922710 922648 922700 922701
VQ Cam Rings Series 20VQ05 20VQ08 20VQ09 20VQ11 20VQ12 20VQ14 25VQ12 25VQ14 25VQ17 25VQ19 25VQ21 30VQ24 30VQ28 35VQ21 35VQ25 35VQ30 35VQ35 35VQ38 45VQ42 45VQ47 45VQ50 45VQ57 45VQ60
Part # MPN-00451 MPN-00452 MPN-00453 MPN-00454 MPN-00455 MPN-00456 MPN-00457 MPN-00458 MPN-00459 MPN-00460 MPN-00461 MPN-00482 MPN-00483 MPN-00467 MPN-00468 MPN-00469 MPN-00470 MPN-00471 MPN-00472 MPN-00473 MPN-00474 MPN-00475 MPN-00476
Vickers # 333624 333625 374799 333626 353901 353902 326984 326985 326986 326987 326988 234470 224525 394961 319396 319397 319398 319399 297510 297718 297502 306772 297503
FPO
FPO
16
Components FPO
FPO
Metaris offers a broad selection of shafts • Standard • Splined • Keyed
Metaris offers a growing range of components for cartridges and vane pumps.
Shafts
We can cross reference most manufacturers numbers including Vickers and Caterpillar
Part # MPN-00600 MPN-00601 MPN-00602 MPN-00603 MPN-00604 MPN-00605 MPN-00606 MPN-00611 MPN-00610 MPN-00612 MPN-00613 MPN-00614 MPN-00615 MPN-00616 MPN-00621 MPN-00622 MPN-00623 MPN-00624 MPN-00625 MPN-00626 MPN-00627 MPN-00628 MPN-00629 MPN-00630 MPN-00631 MPN-00633 MPN-00634 MPN-00635 MPN-00636 MPN-00637 MPN-00642 MPN-00643 MPN-00644 MPN-00645 MPN-00647 MPN-00655 MPN-00656 MPN-00657 MPN-00658
Shaft-Code 25V/VQ Keyed #1 25V/VQ Keyed W/Nut #3 25V/VQ Splined #11 25V/VQ HD Keyed #86 25V/VQ Tapered #5 25V/VQ 14 Tooth # 25 25V/VQ 14 Tooth # 127 35V/VQ Keyed #1 35V/VQ Splined (14 tooth) #4 35V/VQ Splined #11 35V/VQ X-long Splined #19 35V/VQ HD Keyed #86 35V/VQ 14 Tooth #127 45V/VQ 14 Tooth #111 45V/VQ Keyed #1 45V/VQ Splined (14 tooth) #4 45V/VQ Splined #11 45V/VQ X-long Splined #19 45V/VQ HD Keyed #86 45V/VQ Splined #130 2520V/VQ Keyed #1 2520V/VQ Splined #11 2520V/VQ X-long Splined #25 2520V/VQ Splined #123 2520V/VQ HD Keyed # 86 3520V/VQ Keyed #1 3520V/VQ Splined #11 3520V/VQ X-long Splined #19 3520V/VQ HD Keyed #86 3520V/VQ 14 Tooth # 114 3525V/VQ Keyed #1 3525V/VQ Splined #11 3525V/VQ X-long Splined #19 3525V/VQ HD Keyed #86 3525V/VQ 14 Tooth #111 4520V/VQ Keyed #1 4520V/VQ Splined #11 4520V/VQ HD Keyed #86 4520V/VQ 14 Tooth # 114
Vickers # 238755 242747 238929 419082 242784 270187 424457 233624 247803 242287 275270 392669 417331 413020 233369 233370 242885 265575 361760 422541 254964 254848 293360 413433 419083 258249 258250 260604 394571 413434 243448 243449 247019 394036 413023 255533 255536 361761 413436
In addition to the items shown, Metaris now produces a full range of housings for vane pumps. Part # MPN-00661 MPN-00662 MPN-00663 MPN-00664 MPN-00665 MPN-00677 MPN-00678 MPN-00679 MPN-00670 MPN-00669 MPN-00590 MPN-00591 MPN-00592 MPN-00593 MPN-00594 MPN-00673 MPN-00674 MPN-00675 MPN-00676 MPN-00683 MPN-00684 MPN-00689 MPN-00680 MPN-00681 MPN-00682 MPN-00685 MPN-00688 MPN-00690 MPN-00691 MPN-00692 MPN-00693
Shaft-Code 4525V/VQ Keyed #1 4525V/VQ Splined #11 4525V/VQ X-long Splined #19 4525V/VQ HD Keyed #86 4525V/VQ 14 Tooth # 114 4535V/VQ Keyed #1 4535V/VQ Splined #11 4535V/VQ X-long Splined #19 4535V/VQ HD Keyed #86 4535V/VQ 14 Tooth # 114 V10 Keyed #1 V10 Splined #11 V10 13 Tooth #12 V10 11 Tooth #38 V10 Keyed #3 V20 Keyed #1 V20 Thr. Key #3 V20 Woodruff Key #6 V20 Splined #11 V20 Splined #15 V20 Splined #38 V2020 Keyed #1 V2020 Thr. Key #3 V2020 Splined #11 V2020 Splined #51 V210 Square Key #1 V210 Thr. Key #3 V210 Key Slot #6 V2010 #1 V2010 #3 V2010 #11
Vickers # 233524 233527 247102 361762 413024 289083 289084 280904 361763 413027 374338 374339 375480 387481 374340 280372 280504 297330 280515 294922 328096 308686 308925 308926 385517 116644 120037 131420 351249 321214 321215
FPO
17
Seal Kits/ Seal Packs Series 20VQ 25VQ
35VQ
45VQ
2520VQ
3520VQ
3525VQ
4520VQ
4525VQ
4535VQ
Part # MPN-25000 MPN-02501 MPN-02502 MPN-02503 MPN-02504 MPN-02505 MPN-02510 MPN-02511 MPN-02512 MPN-02513 MPN-02514 MPN-02515 MPN-02516 MPN-02517 MPN-02518 MPN-02519 MPN-02520 MPN-02521 MPN-02522 MPN-02523 MPN-02530 MPN-02531 MPN-02532 MPN-02533 MPN-02535 MPN-02536 MPN-02537 MPN-02538 MPN-02550 MPN-02551 MPN-02552 MPN-02553 MPN-02554 MPN-02555 MPN-02556 MPN-02557 MPN-02558 MPN-02559 MPN-02560 MPN-02561
Description Seal Pack* Single Seal Kit Single Seal Kit - Viton Double Seal KIt Double Seal Kit - Viton Seal Pack* Single Seal Kit Single Seal Kit Double Seal Kit Double Seal Kit - Viton Seal Pack* Single Seal Kit Single Seal Kit - Viton Double Seal Kit Double Seal Kit - Viton Seal Pack* Single Seal Kit Single Seal Kit - Viton Double Seal Kit Double Seal Kit - Viton Single Seal Kit Single Seal Kit - Viton Double Seal Kit Double Seal Kit - Viton Single Seal Kit Single Seal Kit - Viton Double Seal Kit Double Seal Kit - Viton Single Seal Kit Single Seal Kit - Viton Double Seal Kit Double Seal Kit - Viton Single Seal Kit Single Seal Kit - Viton Double Seal Kit Double Seal Kit - Viton Single Seal Kit Single Seal Kit - Viton Double Seal Kit Double Seal Kit - Viton
Vickers# 433762 920021 920023 920022 920024 433764 920015 920029 920016 920030 433766 920025 920027 920026 920028 433768 920040 920042 920041 920043 920048 920050 920049 920051 920056 920058 920057 920059 920060 920062 920061 920063 920068 920070 920069 920071 920072 920074 920073 920075
Series 25 & 30V 35V 45V 2520V 3520V 3525V 4520V
Part # MPN-02800 MPN-02801 MPN-02802 MPN-02803 MPN-02805 MPN-02806 MPN-02808 MPN-02809 MPN-02810 MPN-02811 MPN-02812 MPN-02813 MPN-02814 MPN-02815
Description Standard V Seal Kit V Seal Kit - Viton Standard Seal Kit Seal Kit - Viton Standard Seal Kit Seal Kit - Viton Standard Seal Kit Seal Kit - Viton Standard Seal Kit Seal Kit - Viton Standard Seal Kit Seal Kit - Viton Standard Seal Kit Seal Kit - Viton
Vickers# 922850 919656 922851 919262 919850 919632 922856 919303 922859 919304 922862 919305 922863 919616
FPO
* Seal Pack includes retainer and o-ring Note: All double seal kits include primary & secondary shaft seals.
Flex Plate Kits Series V20 V200
Part # MPN-02001 MPN-02002
Description Primary Primary
Vickers# 229235 229236
25VQ & 30VQ
MPN-02003 MPN-02004 MPN-02005
Primary Primary - Viton Secondary
394976 429286 429283
35VQ
MPN-02006 MPN-02007 MPN-02008 MPN-02009 MPN-02010 MPN-02011
Primary Primary - Viton Secondary Primary Primary - Viton Secondary - Viton
394973 429284 429281 394974 429285 429282
45VQ
FPO
FPO
18
Warranty Policy and Procedures for Metaris Inc. products. FPO
Warranty Metaris Inc., hereinafter “Metaris”, Warrants all of its products to be free from defects in material and workmanship under normal operating conditions and proper application in accordance with the specifications for operation as described by the manufacturer for the period of twelve (12) months in service. Limitations on Warranty This Warranty is expressly in lieu of any other warranties expressed or implied. Buyer’s sole and exclusive remedy under this Warranty shall be limited to the repair, replacement or exchange of warranted products at our option, F.O.B. our factory, or designated service center. No special, incidental, consequential or other damage shall be recoverable. Metaris shall not be liable for consequential damages or contingent liabilities including, but not limited to, loss of life, personal injury, loss of crops, loss due to fire or water damage, loss of business or business income, down time costs and trade or other commercial loss arising of out of the failure of the product. Metaris will in no event be liable for any sum in excess of the price received by it for the product for which liability is claimed or asserted.
FPO
No product shall be returned without prior authorization from Metaris. Buyers and their agents shall prepay all transportation charges for the return of such products to Metaris’s factory or designated service center. There will be no acceptance of any charges for labor and/or parts incidental to the removal or remounting of product repaired or replaced under this Warranty. The above Warranty does not cover conditions over which Metaris has no control, including, without limitation, contamination, pressures in excess of recommended maximum, products damaged or subject to accident abuse or misuse after shipment from our factory, products altered or repaired by anyone other than Metaris personnel, authorized Metaris factory personnel or persons so designated in writing by Metaris prior to commencement of said work. A return goods authorization number must be obtained from Metaris or Metaris’s authorized Service center, or Metaris’s authorized agent prior to any products being returned for Warranty.
FPO
19
FPO
METARIS BRAND REPLACEMENT PARTS Our extensive inventory assures you of same day shipping of pumps and parts anywhere in the world. Our parts are 100% interchangeable with OEM products. We are committed to high quality, zero defects, and getting your orders out correctly, and on time. Your satisfaction is guaranteed. All of our products are easily field serviceable. We offer tooling for porting, doweling, and installation, to give you the edge on price and delivery. Whatever your application, Metaris has a high quality replacement product 100% backed by our commitment to service. We want to be the supplier for all your vane product needs.
FPO
FPO
Logística e Ingeniería de México_____
Gracias por la atención a la presente Logística e Ingeniería de México_______________________ Ing. Gustavo González V. Corporativo Periférico Sur 3915 CP 14010 México, DF. Tel. 01 (55) 57 14 98 07 Cel. 55 59 30 44 99 / 270 846 16 http://www.wix.com/gustavovic/lei-servicios-logisticos http://www.wix.com/gustavovic/catalogolei gustavovic@yahoo.com; logisticaeingenieria@ymail.com; mvicent@ymail.com;
http://www.facebook.com/gustavo.vicent