PICTURE B PRESSURE REGULATOR
OIL DRIP SETTING
AIR INLET
WATER FILTER
OIL
SET AIR PRESSURE TO 80 lbs.
p. 9
When this switch is set to "AUTO", the system will automatically start when the D/C (Distribution Conveyor or Inclined Conveyor) motor starts up. When this switch is set to "BYPASS", then the system is on and running, whether the D/C is ON or OFF.
These are optional outputs for the Master Control Panel (if present), so that the system can monitor all the sensors. Depending on whether or not these sensors are calling for product, the Metering Conveyor can be slowed down automatically. (Typically used on larger systems with more sensors, to keep all hoppers more evenly loaded.)
The "X0" input is the signal from the last sensor on the line, where the fixed shear is located. When the switch is set to "AUTO", the sensor is active and checking if the hopper needs product or not. When set to "OFF", it simulates a message that the hopper is full.