Metal deck by ACC Studios

METAL DECK PURLING, & STANDING SEAM

Metal Deck, Purlings & Standing Seam

METAL DECK

METAL DECK TYPE “E” - GALVALUME™ The TYPE E panel is a best-selling for exposed metal roofing and siding applications because its soft lines are architecturally attractive, while the deep ribs provide strength and weatherproof construction. All panels are precision rollformed from hot dipped GALVALUME™ coated steel conforming to ASTM specifications A792-89, Grade 50B for structural quality sheet having a minimum yield strength of 50,000 p.s.i. GALVALUME™ sheet alloy coating is typically 55% aluminum, 1.6% silicon and the balance zinc. Applied to the substrate steel by a patented hot-dip process results in a highly corrosion resistant sheet steel. Each TYPE E panel provides a net coverage width of 36” in. and is fabricated to custom lengths up to 35’ ft. thus requiring fewer laps and allowing faster construction. 36” 12” 1 3/8”

LOAD CONDITION ONE SPAN TWO SPAN THREE SPAN

GAGE 26 24 26 24 26 24

3’-0” 116 166 153 194 118 243

SECTION PROPERTIES Net Cover Width Weight Galv. Min. Yield Strength Desing Stress Moment of Inertia Positive Moment Capacity Negative Moment Capacity Allowable Shear

UNIT

in. 4

3’-6” 85 122 112 143 133 179

4’-0” 65 94 87 110 102 137

GAGE

26 24 36 36 1.03 1.29 50 50 30 30 0.073 0.090 130.6 187 173.2 220 2.6 4.0

4’-6” 52 74 68 87 81 108

SPAN IN FEET 5’-0” 5’-6” 6’-0” 39 29 22 60 47 36 55 46 38 70 58 49 65 54 42 88 73 61

6’-6” 18 29 33 42 33 52

7’-0” 14 23 28 36 26 43

7’-6” 11 19 25 31 21 35

8’-0” 9 15 22 27 18 29

1) Table shows allowed load governed by stress and deflection limit of 1/180. Figures in shade indicate live load which will produce a deflection not grater than 1/180. 2) For wind loads only values shown may be increased by 33.3%.

LENGHTS AVAILABLE IN STOCK: 10’, 12’, 14’, 16’, 18’, 20’, 22’, 24’, 25’ ALSO, WE CAN CUT IT TO YOUR NEEDED SIZE.

AVAILABLE IN THESE COLORS:

Country Red

Blue

White

Green

For accuracy of color matching, use actual product sample.

METAL DECK

357

Tel:(787) 747-9415 • www.steelandpipes.com • © Steel and Pipes, INC.

METAL DECK

Metal Deck, Purlings & Standing Seam

TYPE “B” ROOF DECK Type “B” 1.5 is a wide rib steel deck that can be used as Composite Steel Floor Deck, Non-Composite Steel Form Deck or Steel Roof Deck.Type B1.5 Composite Steel Floor Deck acts at the positive bending reinforcement for structural concrete. After the concrete hardens, the steel deck and the concrete are interlocked by the shape of the deck, mechanical means, surface bond or by a combination of these means. Type “B” 1.5 Non-Composite Steel Form Deck is used as form for reinforced concrete slabs. Type “B” 1.5 Steel Roof Deck is used as the support of roofing materials and design live loads primarily for roof construction with rigid insulation board and built-up roofing. Type “B” 1.5 Deck is roll-formed from steel conforming to ASTM A653 Structural Quality, Grade 40, with a G-90 hot dipped galvanized coating. Finished panels provide a net coverage of 36 in. and are manufactured to custom length up to 35 feet.

36” 1 ½” 6”

SECTION PROPERTIES - 12" SECTION DECK DESIGN FY GAUGE THICKNESS 22 20 18

in. 0.0295 0.0358 0.0474

SPAN CONDITION ONE SPAN TWO SPANS THREE SPANS

k.s.i 33 33 33

WEIGHT GALV. psf 1.60 2.04 2.07

in4 0.1400 0.1833 0.2600

Sn Sp POSITIVE NEGATIVE BENDING BENDING in3 0.1853 0.2287 0.3083

in3 0.1918 0.2390 0.3160

VA lbs. 1,658 1,993 2,592

1. Section Properties per one foot section calculated in accordance with the American Iron and Steel Institute's (AISI) Specification for the design of Cold-Formed Steel Structural Members, 2001 Edition US (ASD). 2. Ie is the minimum moment of Inertia. 3. Sp and Sn are the minimum reduced Section Modulus for positive bending and negative bending respectively, for use with the full allowable stress in accordance with AISI provisions. 4. Thickness shown is design thickness for bare metal.

UNIFORM TOTAL (DEAD & LIVE) LOAD in pounds per squa

GAUGE 22Ga 20Ga 18Ga 22Ga 20Ga 18Ga 22Ga 20Ga 18Ga

Ie MIN.

4’-0” 153 188 254 153 190 252 190 236 312

4’-6” 111 142 197 121 151 200 151 188 248

5’-0” 83 106 146 99 123 163 123 154 203

5’-6” 65 92 112 82 102 135 102 127 168

6’-0” 52 66 89 69 86 114 86 107 142

6’-6” 43 54 72 59 73 97 73 92 121

7’-0” 37 45 60 51 63 84 60 76 104

7’-6”

8’-0”

38 50 44 55 73 51 64 86

33 43 39 49 64 44 54 73

re foot

8’-6”

9’-0”

43 57 38 47 62

38 51 34 41 54

9’-6” 10’-0”

36 48

1. Loads shown in tables are uniformly distributed total (dead plus live) loads in psf. All loads are governed by the allowable flexural stress limit of 20 ksi (0.6 of minimum yield strength of steel). Figures in shaded areas are governed by live load deflection not in excess of L/240 when a dead load of 10 psf is assumed. 2. Multiple span loads shown are based on equal adjacent spans. Tabulated loads may not apply for adjacent spans that differ in length by more than 10%. 3. Load tables are calculated using Section Properties based on the specified design thickness listed by the Steel Deck Institute "Design 3.Manual". Delivered minimum thickness shall be not less than 95% of the design thickness. 4. When heavy construction loads or other unusual concentrated loads are contemplated, the required live loads must be increased to account for the anticipated concentrated loading. . 5. Span length assumes center to center spacing of supports. Tabulated loads may not be increased by assuming clear span dimensions. 6. Bending Moment formulae used for flexural stress limitations: Simple and Two Spans: M = wL2 / 8. Three of More: M = wL2 / 10 7. Deflection formulae used for deflection determination: Simple Span D = 0.013 wL4 / EI Two Spans D = 0.0054 wL4 / EI Three Span D= 0.0069 w L4 / EI

Tel:(787) 747-9415 • www.steelandpipes.com • © Steel and Pipes, INC.

358

METAL DECK

Metal Deck, Purlings & Standing Seam

METAL DECK

TYPE “S” STEEL FORM STEEL FORMSteel form is a high strength, light-weight permanent form for poured concrete or light-weight aggregate, used in the construction of floor slabs and roof decks.Sheets are roll formed from hot dipped galvanized steel, G-90 Coating, conforming to ASTM Specification A653, Grade 80, for structural quality sheet having a minimum yield strength of 80,000 p.s.i. Each sheet provides a net coverage width of 30” and is fabricated to custom lengths up to 35 ft. 30" 2 1/2" 0.594

PHYSICAL PROPERTIES GAUGEG.S.G.28

in. in. P.S.F. K.S.I. K.S.I in.4 in. 3 ft.-lbs kips

Overall Width Net Cover Width Weight-Galv. Min. Yield Strength Desigh Stress Moment of Inertia Section Modulus Moment Capacity Allowed Shear

When used for roof construction in conjunction with light-weight insulating concrete fill, the sheets form a structural deck which supports the total weight of slab and roofing materials plus the desired live loads. Actual deflections are much less than those tabulated below because of the composite action between the insulating concrete and steel deck. When the deck is used only as a form for structural concrete slabs, the total loads on the sheets consists of the weight of the wet concrete plus some arbitrary live load for construction traffic. In this case, the tabulated deflections are actual deflections.

32 30 0.89 80 30 0.0095 0.0303 75.7 2.24

NOTE: Properties shown are for 12 in. cover width. ALLOWABLE UNIFORM TOTAL LOADS (lbs./ft.2) & DEFLECTION (in) SPAN IN FEET

LOAD CONDITION TWO SPANS THREE OR MORE SPANS

LOAD

269

151

LOAD

336

189

121

VOLUME OF FILL OVER STEELFORM To determine total volume of fill in cu. Ft., multiply area in square feet by correspondingfigure from table DEPTH OVER TOP OF RIB

Fill in cu. Ft.

METAL DECK

2 1/2"

3 1/2"

4 1/2"

0.232

0.273

0.315

0.357

0.398

359

Tel:(787) 747-9415 • www.steelandpipes.com • © Steel and Pipes, INC.

PURLINGS

Metal Deck, Purlings & Standing Seam

“C” PURLINGS BEAM PROPERTIES

“C” purlins are roll formed from high strength hot dipped galvanized steel, conforming to ASTM Designation A653, Grade D, for Structural Quality Steel with a minimum yield strength of 50,000 psi, and G-90 galvanized coating.Sectional properties shown below were computed in strict accordance with the provision of The American Iron & Steel Institute's “Specifications for the Design of Cold-Formed Steel Structural Members", 1996 EDITION.

SECTION

H in

DIMENSIONS W L t in in in

W L

AREA

4 x 2.5 6 x 2.5

WT Lbs/ft

Ixx in 4

PROPERTIES FOR BEAM Fb Rxx 3 ksi in ksi in

R.M. Lbs-ft

V kips

28.85 44.38

5.77 3.889 7.40 4.578

13151 16930

10.30 9.70

2.47

6 x 3.5 8 x 2.5 8 x 3.5 10 x 3.5 12 x 3.5

12 12

10 12

3.5 3.5

1.00 1.00

0.105 0.105

1.91 2.12

NOTES: BEAM STRENGTH: Properties shown for beam strength have been reduced, where required, to allow the use of the full allowable design stress in accordance with Section 2.3 of the Specifications. The allowable design stress Fb, is based on the basic design stress for flexural members and the allowable bending stress in webs determined in accordance with the provisions of Section 3 of the Specifications.

6.80 7.50

50 50

30 30

Ixx is the moment of inertia for deflection determination. Sxx is the section modulus reduced for load determination. DIMENSIONS: Thickness and area shown are those of bare steel exclusive of the galvanized coating.Weights listed for purlins are based on the weight of galvanized steel.

Tel:(787) 747-9415 • www.steelandpipes.com • © Steel and Pipes, INC.

360

PURLINGS

Metal Deck, Purlings & Standing Seam

PURLINGS

“Z” PURLINGS

Y W

R 0.3” (typ.)

BEAM PROPERTIES 50° (typ.)

“Z” purlins are roll formed from high strength hot dipped galvanized steel, conforming to ASTM Designation A653, Grade D, for Structural Quality Steel with a minimum yield strength of 50,000 psi, and G-90 galvanized coating. Sectional properties shown below were computed in strict accordance with the provision of The American Iron & Steel Institute's "Specifications for the Design of Cold-Formed Steel Structural Members", 1996 EDITION.

SECTION

H in

W in

DIMENSIONS AREA L t in in in 2

WT Lbs/ft

Ixx in 4

PROPERTIES FOR BEAM Sxx Rxx Fy R.M. 3 in ksi Lbs-ft in

V kips

8 x 2.5 10 x 3.5

PURLINGS

361

Tel:(787) 747-9415 • www.steelandpipes.com • © Steel and Pipes, INC.

ACCESSORIES

Metal Deck, Purlings & Standing Seam

ACCESSORIES ITEM NUMBER

DESCRIPTION

050.304.90 050.090.0203

ELBOWS 3” X 4” ELBOWS 2” X 3”

ITEM NUMBER

DESCRIPTION

050.304.10

OUTLET RECTANGULAR 3” X 4”

ITEM NUMBER

DESCRIPTION

050.203.COPA

OUTLET RECTANGULAR 2” X 3”

ITEM NUMBER

DESCRIPTION

050.203.0100 050.304.12 050.304.16 050.304.20

DOWNSPOUT .0175 - 2” X 3” X 10’ DOWNSPOUT .019 - 3” X 4” X 12’ DOWNSPOUT .019 - 3” X 4” X 16’ DOWNSPOUT .019 - 3” X 4” X 20’

PRE-ENGINEEREN BUILDING SYSTEM

Tel:(787) 747-9415 • www.steelandpipes.com • © Steel and Pipes, INC.

362

ACCESSORIES

Metal Deck, Purlings & Standing Seam ROOF SYSTEM STANDING SEAM ROOF SYSTEM PLATINUM SERIES

16”/18”

Utilizing a unique patented seam design that offers two lock seam features. The Triple-Lok and Quad-Lok. A revolutionary innovation that provides unparalleled performance from one profile. The Triple-Lok seam is accomplished by seaming the entire seam with an electrical seamer. This seam will provide an allowable wind uplift loading of 56 psf.* 1. It’s the only seam on the market to use the 360º + 90º seam, which: • Structurally isolates the seam from the effects of severe wind loading by placing load resisting bends between the seam and clip hook and the stresses of panel deflection. • Isolates the seam sealant from dislodgment or separation during severe wind loading, thereby assuring a water resistant seam throughout the life of the roof. 2. Fool-proof installation: all that is required is the placement of the electrical seaming machine on the seam to begin the seaming process. It’s virtually impossible for the seamer to run off the seam until it comes to the end of the panel or is removed by the operator.

Rigid’s Platinum Series is a revolutionary patented standing seam roof system that incorporates two unique seams. The Triple-Lok seam for normal wind speeds and the Quad-Lok for coastal areas and other high wind speed zones. The Platinum Series incorporates a double seam, double hook side lap design to resist seam failure between supports and side lap unfurling and unzipping. It is a roof system with tremendous strength designed to with stand the most strenuous uplift testing and highest velocity wind speeds. Combine that with its aesthetic appeal which is a favorite of architects and building owners alike, and you have an unsurpassed panel in look and quality. Available in all of Rigid’s Spectralite 3000 Fluoropon 70%, Kynar 500/Hylar 5000 colors.The Platinum Series offers you a wide range of colors to enhance the the beauty of your project and give you unsurpassed coating performance for continued beauty year after year.

The Quad-Lok seam is accomplished by seaming special roof zones with an electrical seam, when required. This seam will provide an allowable uplift load of 64 psf*, (or 120 psf over 2’6” purlin spacing). By using the Quad-Lok seam, the perimeter conditions of roofs in high wind coastal locations can resist wind loads without exterior clamps and brackets that most other roof systems require to meet the Zone III uplift loads. The Quad-Lok seam is the only seam on the market that provides higher uplift resistance with 24 gauge panel than all other roof systems using 22 gauge panels. TRIPLE-LOK QUAD-LOK

* when seamed with a 24 gauge panel over 5’0” purlin spacing All of the above seams and load tolerances are calculated in accordance with AISI using ASTM E 1592 tests.

STANDING SEAM

363

*TO REQUEST A QUOTE, CONTACT YOUR STEEL AND PIPES SALES REPRESENTATIVE.

Tel:(787) 747-9415 • www.steelandpipes.com • © Steel and Pipes, INC.

ROOF SYSTEM

Metal Deck, Purlings & Standing Seam

Panel Interior: Standard is 26ga stucco embossed G-90 galvanized steel with PPG Durafin 2000'" High Performance Coating, USDA accepted, warranted for 20 years in areas requiring heavy wash down'. Customer Options: Other gauges in steel or other materials; a choice of 8 standard PYDF colors and custom color coatings to match customer color samples. * subject to terms and conditions of coating warranty agreement photos: copyright Rigidbuilding System, Ltd.

MATERIAL TESTING This product has been extensively tested for compliance with various industry standards and building safety codes. Fire Performance - RHR Series panels have passed the Factory Mutual full scale corner test (inciuding ASTM E-84 and D-1929) and are approved for unlimited weights. Thermal Transmission - Panels have been tested for insulating values in accordance with ASTM C-236/C-1363 methods. Air Inffltration - Panel joints have been tested for water penetration in accordance with ASTM E-283. photos: copyright Rigidbuilding System, Ltd.

Water Inffltration - Panel joints have been tested for water penetration in accordance with ASTM E-331. Structural - Panels have been tested per ASTM E-72 methods. Roof panels have been tested per FM 1-90 and UL uplift criteria. WARRANTY All products are warranted to be free from defects in material and workmanship for a period of one year from the date of shipment in accordance with the terms and conditions in our "Limited Warranty". The coverage period of the "Limited Warranty" may be extended by Rigid Building *TO REQUEST A QUOTE, CONTACT YOUR STEEL AND PIPES SALES REPRESENTATIVE.

photos: copyright Rigidbuilding System, Ltd.

364

STANDING SEAM

Metal Deck, Purlings & Standing Seam

TEE-PANEL

SPECIFICATIONS PRODUCT: Furnish and install Berridge Tee-Panel Standing Seam System as manufactured by Berridge Manufacturing Company, San Antonio, Texas. MANUFACTURE: Tee-Panel provides a 12-3/4” coverage with a 1” seam height (Snap on Seam contains a factory applied vinyl weatherseal insert). Panel and Snap on Seam are available from the factory in continuous lengths to a maximum of 40’-0”. Panel may be field roll formed to virtually unlimited lengths with Berridge SS-14 Portable Roll Former. Panel and Snap on Seam may be field curved with SS-14, both concave and convex to a minimum radius of 4’-0”. WEATHERTIGHTNESS: Certification from independent testing laboratory indicating no measurable air or water penetration through the Snap on Seam in accordance with ASTM E 1680 and E 1646 is required.

12 3/4” 324 mm 1” 25 mm

ENGINEERING: Roof deck shall be of a solid structural sheathing and free of all objects which may puncture underlayment, (entire roof area must be covered with a minimum of number thirty roof felt run horizontally starting at the eave, review Berridge underlayment details for complete installation instructions). Where required, panel assemblies can be constructed to meet Underwriter’s Laboratory UL 90 pursuant to Construction Number 296. Additional UL ﬁre rated assemblies reference Berridge website.

TEE-PANEL CROSS-SECTION Tee-Clip

*U.S. Patent No. 4641475

STANDING SEAM

Berridge Curved Tee-Panel

Tee-Clip

365

Snap-On Seam Cap w/Patented Vinyl Insert

Berridge Tee-Panel can be curved to a minimum radius of 4’ for convex and 8’ for concave curved applications using the Berridge SS-14 portable roll former.

Metal Deck, Purlings & Standing Seam

CEE-LOCK CEE-LOCK

SPECIFICATIONS (Complete speciﬁcations ridge.com)

available

www.ber-

PRODUCT: Furnish and install Berridge Cee-Lock Standing Seam System as manufactured by Berridge Manufacturing Company, San Antonio, Texas. MANUFACTURE: Cee-Lock provides an 11-1/2” or 16-1/2” coverage with a 1-1/2” seam height (a factory or field applied vinyl weatherseal insert is available in panel seam). Panel is available from the factory in continuous lengths to a maximum of 40’-0”. 16-1/2” exposure panel may be field roll formed to virtually unlimited lengths with Berridge CL-21 Portable Roll Former. WEATHERTIGHTNESS: Certification from independent testing laboratory indicating no measurable air or water penetration through the Snap on Seam in accordance with ASTM E 1680 and E 1646 is required. ENGINEERING: Roof deck shall be of a solid structural sheathing and free of all objects which may puncture underlayment. (Entire roof area must be covered with a minimum of number thirty roof felt run horizontally starting at the eave, review Berridge underlayment details for complete installation instructions.) Where required, panel assemblies can be constructed to meet Underwriter’s Laboratory UL 90 pursuant to Construction Numbers 334, 381, 404 and 474. For additional UL fire rated assemblies, reference Berridge website.

1 ½” 38 mm

Vinyl Weatherseal (Optional)

11 ½” 292 mm (Factory formed only)

16 ½” 419 mm

Cee-Lock Panel

Cee-Lock Clip or Continuous Rib

* U.S. Patent No. 4641475

366

STANDING SEAM

Metal Deck, Purlings & Standing Seam ROOF SYSTEM STANDARD COLORS Due to limitations in the printing process, please request actual color chips for accurate color viewing.

BUCKSKIN

PARCHMENT

ALMOND

AGED BRONZE

SHASTA WHITE

FOREST GREEN

PATINA GREEN

SIERRA TAN

MEDIUM BRONZE

CHARCOAL GREY

HEMLOCK GREEN

BRISTOL BLUE

TERRA-COTTA

DARK BRONZE

ZINC GREY

HARTFORD GREEN

ROYAL BLUE

COLONIAL RED

COPPER BROWN

MATTE BLACK

TEAL GREEN

BURGUNDY

DEEP RED

PREMIUM COLORS

METALLIC COLORS

Berridge premium colors require a nominal surcharge.

NATURAL WHITE

AWARD BLUE

minal surcharge. Due to limitations in the printing process, please request actual color chips for accurate color viewing.

CHAMPAGNE

COPPER-COTETM

ANTIQUE COPPER-COTE

LEAD-COTETM

PREWEATHERED GALVALUME®

NATURAL METAL FINISH Berridge Acrylic-Coated Galvalume® is a coated sheet product that combines the corrosion resistance of GALVALUME® steel sheet with a clear, organic resin applied to the top side and bottom side of GALVALUME® substrate. Energy Star is only valid in the United States.

ACRYLIC-COATED GALVALUME®

ZINC-COTETM

All colors except Award Blue comply with LEED® v3 & Energy Star requirements for steep slope roofs greater than 2:12. Almond & Natural White comply with LEED® v3 requirements for low slope roofs, 2:12 or less. Natural White also complies with Energy Star requirements for low slope roofs, 2:12 or less.

STANDING SEAM

367