Portafolio de Servicios EAGLE COMPANY

PORTAFOLIO DE SERVICIOS

2019 - 2020

QUIENES SOMOS EAGLE OIL COMPANY es una compañía prestadora de servicios petroleros en procesos de perforación, completamiento y producción. Sus actividades dan comienzo en el año 2019 y en la actualidad se conforma por personal con más de 14 años de experiencia en la industria del petróleo. Cuenta con oficinas, base operativa en San Martín - Cesar y base de apoyo en Neiva – Huila, para dar respuesta a las necesidad operacional de nuestros clientes en el menor tiempo posible en todo el territorio nacional.

NUESTRA MISIÓN EAGLE OIL COMPANY S.A.S es una empresa comprometida en alcanzar los más altos índices de excelencia en desempeño, garantizando el cuidado del medio ambiente y la seguridad en los procesos. Para ello cuenta con personal calificado, equipos y herramientas ajustadas a cada necesidad de nuestros clientes, generando valor agregado, garantizando la rentabilidad y previniendo daños en la zonas de influencia de nuestras operaciones.

NUESTRA VISIÓN Para el 2025 Eagle Oil Company Sera la alternativa confiable en consultoría especializada en sus principales servicios de limpieza, pruebas y producción a pozos en la industria petrolera, soportada en su sistema de gestión HSEQ, siendo reconocida y actuando bajo los principios de respeto, compromiso, transparencia operacional y ética profesional para con todos nuestros clientes.

NUESTROS VALORES CORPORATIVOS:

• Lealtad: estamos comprometidos con el logro de objetivos de la empresa, obrando siempre con honestidad y justicia.

• Responsabilidad: Todo el personal de EAGLE OIL COMPANY., cumple con sus obligaciones y compromisos adquiridos, maximizando los recursos empleados para lograr los objetivos con eficiencia y calidad.

• Calidad: En cada uno de nuestros proyectos y servicios ofrecidos, fomentando siempre el mejoramiento continuo.

• Ética: Cada miembro de EAGLE OIL COMPANY actúa con integridad y transparencia en todas sus actividades.

• Servicio al cliente: Todo el personal de EAGLE OIL COMPANY está comprometido a servir a nuestros clientes, garantizando un trato humano haciéndolo sentir que hace parte de nuestra organización.

ÁREA DE COMERCIALIZACIÓN

Contamos con personal altamente capacitado en negociaciones, prestamos un servicio de calidad alineados a estándares nacionales e internacionales, consideramos a nuestros clientes como el ente fundamental de nuestra empresa y llegamos a acuerdos con buenos beneficios para las dos partes en un ambiente favorable de negocios.

ASESORAMIENTO TÉCNICO. Somos capaces de asesorar y argumentar los cambios necesarios en los pozos y sus partes para mejorar eficiencia, producción y optimización o evitar posibles daños que conllevarían a inversiones mayores en operaciones de workover,perforación y producción.

AREA DE SERVICIOS El departamento de servicios en EAGLE OIL COMPANY S.A.S tiene la misión de cumplir en el campo o locación del cliente con todos los requerimientos ya sean de asesoría o ejecución.

Contamos con una alta disponibilidad de técnicos altamente calificados y herramientas con tecnología moderna. Nuestro departamento tiene la versatilidad de instalar herramientas y equipos de toda la variedad de marcas y modelos existentes en el mercado.

EN EAGLE OIL COMPANY S.A.S BRINDAMOS A NUESTROS CLIENTES LOS SIGUIENTES PRODUCTOS Y SERVICIOS:

* Alquiler de herramientas para limpieza a pozos rotativa ( Wellbore Clean-Up ) broca,raspador, cepillo, magneto, canasta. La sarta diseñada para lograr resultados de limpieza confiables. * Venta y alquiler de herramientas para servicios de cementación a pozos como permanentes Bridge plug, cement retainers, adapter kit , stinger y seting tool hidráulica o mecánica. * Alquiler o venta de empaques mecánicos y hidráulicos para pruebas a pozos, fractura hidráulica, cementación y estimulación selectiva a pozos. * Renta de Packer selectivo para COIL TUBING para estimular y trabajar en tuberías o completamientos 2 7/8” EUE. * Suministramos personal idóneo y certificado para prestar un buen servicio operativo, en cualquier área de nuestros servicio y herramientas. * suministramos y facilitamos cualquier tipo de importación o exportación bajo muestra y especificación técnica de nuestro cliente. * Prestamos mantenimiento, pruebas hidrostáticas y asesoría técnica a herramientas de limpieza empaques de servicio o completamiento y sistemas de levantamiento artificial, en base o áreas donde el cliente nos requiera. * Brindamos asesorías de ingeniería o técnicas en nuestras áreas de servicios.

CASING SCRAPER ( 7” 23-29#) The Casing Scraper is designed to provide 100% scraping coverage when cleaning the inner walls of well casings and liners. The “Tough Boy” can remove film, cement cakes, mud cakes, shot burrs, or any type of scaly material.

Casing Scraper has been in service since 1981. Our customers continue to be impressed by the “Tough Boy”’s reliability, versatility, minimum upkeep, and the excellent results provided time after time. provides the industry with a NEW concept of wall cleaning. The “Tough Boy” features heavyduty construction and easy on-site assembly and maintenance. The new 45-degree blade angle provides 100% scraping coverage and excellent results when run behind a bit or mill

MAGNET TOOL ( 7” 23 – 29 # ) “Super Strong” Magnet Tool is high temperature resistant and creates a magnetic field designed to optimize the capture of ferrous particles.

A non-rotating stabilizer centers the tool in the well bore and enables extended rotation and reciprocation.

A simple and easy cleaning method allows for its use on multiple trips.

BRUSH TOOL ( 7” 23-29#) Now the “Tough Boy” scraper can be fitted with brushes to complete the cleaning process.

The “Tough Boy” scraper and the brush tool can be run simultaneously. It is still possible to both reciprocate and rotate with this arrangement. Plenty of room for bypassing cuttings is still available with both the scraper and the brush.

Same “Tough Boy” toughness, but with brushes and/or blades. Same reliability and service.

WASTE RETRIEVER TOOL (7� 23 – 29 # ) Waste Retrievers are a special Type of Junk Basket used to capture solids and debris and remove them from the Well Bore.

Waste Retriever baskets have 14 U.S. gallon, 10 U.S. gallon, and 4 U.S. gallon capacities respectively.

A series of Venturi Jets (patent pending) manipulate fluid flow to assist solids capture in fluid flows with low annular velocity.

BITS FOR REMEDIAL OR RE-ENTRY OPERATIONS Varel’s classic open bearing steel teeth bits for remedial, re-entry, and water well applications.

All bits incorporate open throat hydraulics and can accommodate either regular through string flow or reverse circulation which is frequently used to re-enter wells. L2, L1, and LH1 are offered from softest to hardest of the cutting structure applica¬tions.

APPLICATIONS Workover bits can be used for drilling cement, drilling composites, drilling plugs, paraffin clean out, scale clean out, thru tubing opera¬tions, coiled tubing operations, and drill ahead re-entries.

Water well drilling.

HDD drilling.

FEATURES / BENEFITS Forged steel teeth cutting structures provide stronger more impact resistant teeth when compared to milled teeth because the forged metal teeth grain structure is preserved in the teeth.

Teeth hardfacing processes are continually monitored and updated to ensure the highest quality hardfacing deposits with regular test¬ing of product and welders. Advanced materials and manufacturing tech¬niques result in oilfield grade quality workover bits.

Skirted bits are available as an option for reverse circulation applications. Drill bit skirts are added between the bit legs with the inten¬tion of directing fluid to the bottom of the hole to pick up cuttings off bottom before turning and exiting through the center of the bit.

B20/B105/B110/B120 HYDRAULIC SETTING TOOL PRODUCT 10-270 AND 10-271 The TechWest B Setting Tools are pressure activated setting tools ran on jointed tubing, coiled tubing or drill pipe. It is used to set packers which are normally set on wireline or hydraulically.

The TechWest B Setting Tool uses a bottom connection identical to the Baker E-4 wireline setting tools. It is standard equipped with three (3) pistons and is designed so additional piston sections may be added to lower the necessary setting pressure. To prevent possible tubing collapse, the B Setting Tool setting tool is often ran in series with the TechWest Auto Flow Sub (10-274). The Auto Flow Sub has ports to allow fluid to enter the tubing while running in hole. A ball drop shifts the ports closed prior to activating the Setting Tool.

For small-bore OD (thru-tubing applications), the TechWest B105 tool is recommended as it is filled with hydraulic oil providing additional setting force. For large-bore OD the TechWest B20 setting tool is recommended.

OPERATION This Setting Tool uses the same adapters for running as are used with a Baker E-4 Wireline Setting Tool. The B Setting Tool is run into the desired setting depth and the ball is dropped to the ball seat in the tool (when used on Coiled Tubing the ball is ran in place). Sufficient pressure is applied to set and pack off the packer. The pressure, or combination of RETRIEVABLE pressure and tubing tension, then shears the Shear Stud or Ring, freeing BRIDGE PLUGS RETRIEVABLE the Setting Assembly from the packer. The Setting Tool will automatically BRIDGE PLUGS drain the Tubing String as it is being pulled.

SPECIFICATIONS SPECIFICATIONS 10-270 SPECIFICATION GUIDE 10-270 SPECIFICATION GUIDE Product Product Number Name Product Product Number Name

Body OD inBody OD mm

B20

10-270-0425

in 4.250

B20

10-270-0425

4.250

Equiv. E4 Assembly Equiv. E4 Assembly

Max Shear Rating Max lb Shear Rating daN

mm 107.9

20#

lb 50,000

daN 22,200

107.9

20#

50,000

22,200

Thread Size

Standard Thread Connection in / mm Size Standard 3 1/2 Connection in / mm EUE 388.9 1/2 EUE 88.9

10-271 SPECIFICATIONS 10-271 SPECIFICATIONS Product Product Number Name Product Product Number Name B105 10-271-0181

Body OD inBody OD mm 1.81 in

46.0 mm

Max Shear Rating

Equiv. E4 Assembly Equiv. E4 Assembly 5#

15,000 lb

Max lb Shear Rating daN 7,000 daN

B105 B110

10-271-0181 10-271-0300

1.81 3.50

46.0 88.9

5# 10#

15,000 30,000

7,000 13,300

B110 B110

10-271-0300 10-271-0312

3.50 3.06

88.9 88.9

10# 10#

30,000 30,000

13,300 13,300

B110 B110

10-271-0312 10-271-0350

3.06 3.50

88.9 88.9

10# 10#

30,000 35,000

13,300 15,500

B110 B120

10-271-0350 10-271-0425

3.50 3.80

88.9 107.9

10# 20#

35,000 50,000

15,500 22,200

B120

10-271-0425

3.80

107.9

20#

50,000

22,200

Thread Size in / mm Size 1.00 in / mm 25.4 1.00 2 3/8 25.4 60.3 2 3/8 2 3/8 60.3 60.3 2 3/8 2 3/8 60.3 60.3 2 3/8 2 7/8 60.3 60.3 2 7/8 60.3

Standard Thread Connection Standard Connection LPT LPT EUE EUE EUE EUE EUE EUE EUE EUE

MODEL D BRIDGE PLUG PRODUCT 20-145 The TechWest Model D Bridge Plug is a fully drillable, high performance permanent Bridge Plug suitable for zone abandonment or temporary suspension. It will safely handle working differential pressure of up to 70 MPa (10,000 PSI). A one-piece element, combined with full 360o coverage metal back up rings, provide a dependable seal for high pressure and elevated temperature applications up for 300o F. The Model D Bridge Plug also features a one-piece slip system that will set securely in up to and including P-110 Casing.

The Bridge Plug is designed for speed and safety while running on wireline, and for strength and durability after setting. High performance and reliability are not compromised in any way.

PRODUCT FEATURES • • • • •

Cast Iron drillable design Bi-directional, one-piece slips Sets in multiples casing types, including P-110 No tension mandrel required.

Retaining rings to assist in preventing element extrusion.

PERMANENT AND DRILLABLE

OPERATION

MODEL PLUG This plug may D beBRIDGE run and set using a standard E-4 wireline Setting Tool and Sleeve with no PERMANENT special adapter20-145 equipment required. If necessary, the Bridge Plug may be run on tubing or PRODUCT AND DRILLABLE coiled tubing using a B Hydraulic Setting Tool.

The TechWest Model D Bridge Plug is a fully drillable, high performance permanent

SPECIFICATIONS

Bridge Plug suitable for zone abandonment or temporary suspension. It will safely handle

20-145 SPECIFICATION GUIDE

working differential pressure of up to 70 MPaTool (10,000 PSI).

Setting Range Pressure Casing Weight OD

Casing Size

Product Number

Rating

Min

Max

Set Force

o in/mm lbs/ftelement, combined with psi in/mmmetal in/mm A one-piece full 360in/mm coverage back uplbsrings, provide a 2 3/8 1.750 1.780 2.074 4-5.8 20-145-0220 10k 9000 60.3 44.45temperature 45.21 52.68 dependable seal for high pressure and elevated applications up for 300º F. 2 7/8 2.220 2.340 2.525 6.4-6.5 20-145-0250 10k 9000 73.0 56.39 slip 59.44 The Model D Bridge Plug also features a one-piece system64.14 that will set securely in up 2.750 2.867 3.258 5.75-10.3 20-145-0350 10k 9000 69.85 72.82 82.75 to and including P-110 Casing.

3 1/2 88.9 2.430 2.548 2.764 12.8-15.8 20-145-0360 10k 9000 61.72 64.72 70.21 The Bridge Plug is designed for speed and3.140 safety 3.340 while running on wireline, and for 4 3.732 5.6-14 20-145-0400 10k 20000 101.6 79.76 84.84 94.79

strength and durability after setting.

4 1/2 9.5-15.1 20-145-0450 114.3 compromised in any way.

5 11.5-20.8 20-145-0500 127.0 5 1/2 13-23 20-145-0550 139.7 PRODUCT FEATURES 5 3/4 14-25.2 20-145-0600 146.1 6 5/8  Cast Iron design 17-32 drillable 20-145-0660 168.3 7 Bi-directional, one-piece slips 17-35 20-145-0700 177.8  Sets in multiples casing types, 7 5/8 20-39 20-145-0750 193.7

10k

High performance and reliability are not 3.562 3.826 4.090

90.47 97.18 103.89 3.937 4.154 4.560 10k 100.00 105.51 115.82 4.312 4.580 5.044 10k 109.52 116.33 128.12 4.699 4.890 5.290 10k 119.35 124.21 134.37 5.375 5.595 6.135 10k 136.53 142.11 155.83 5.687 6.000 6.538 10k 144.45 152.40 166.07 including P-110 6.312 6.625 7.125 10k 160.32 168.28 180.98  No tension mandrel required.

8 5/8 7.125 7.310 8.097 24-49 20-145-0850 10k 219.1 180.98 185.67 205.66  Retaining rings to assist in preventing element 9 5/8 8.125 extrusion.

8.435 9.063 29.3-58.4 20-145-0950 8k 244.5 206.38 214.25 230.20 10 3/4 9.437 9.66 10.192 32.7-60.7 20-145-1070 5k 273.1 239.70 245.36 258.88 OPERATION 11 3/4 10.437 10.772 11.150 38-60 20-145-1160 4k 298.5 265.10 273.61 283.21 This plug 60-83 may be run 20-145-1180 and set using a 4k standard E-4 wireline 11 3/4 9.937 10.192 Setting 10.772 298.5 252.40 258.88 273.61 no special adapter equipment required. If necessary, the Bridge 13 3/8 11.88 12.175 12.715 48-84.5 20-145-1370 3k 339.7 301.75 309.25 322.96

33000

33000 33000 33000 50000 50000 50000 50000 50000 50000 50000

Tool and Sleeve with 50000 Plug may be run on 50000

CEMENT RETAINER (MODEL M AND W) PRODUCT 20-138 AND 20-139 The Techwest Model M Cement Retainer (Product 138) and the TechWest Model W Cement Retainer (Product 20-139) are rugged, compact, Cement Retainers engineered for trouble free running and setting.

The slips, packing elements and other components are positively secured to ensure high speed running of the retainer.

The Cement Retainer may be set on tubing or on wireline by replacing the pre-segmented Top Slip by a one-piece Top Slip and replacing the Shear Plug with a Shear Ring. The use of a Shear Ring allows the retainer bore to be filled with grease to prevent solids from settling inside and preventing proper operation of the valve. The Cement Retainer may be converted to a Bridge Plug by removing the bottom Valve Assembly and replacing it with a Cap. FEATURES • • • •

Drillable cast iron design Converts between mechanical (20-138) and wireline set (20-139) by changing top slips.

Easily converts to a Bridge Plug Rated to 10k psi (8-5/8’’ and smaller)

OPERATION A Ramcharger Setting Tool (Product 10-064) is used to run and mechanically set the Tubing Set Cement Retainer, and to operate the valve after setting. The Wireline Cement Retainer is set with the TechWest B Series Setting Tool (Product 10- 270, 10-271) or other Baker E-4 compatible pressure Setting Assemblies.

The Pressure balanced Sleeve Valve is opened by lowering the tubing and is closed PERMANENT with pick-up. A Shear System prevents the valve from inadvertently opening at any time during running or setting. The AND DRILLABLE Tubing String may be tested before you squeeze by picking upPERMANENT the tubing to close the valve and applying AND(MODEL DRILLABLE CEMENT AND W) pressure. The operation of the valve allows pressure theRETAINER be held on theM final squeeze when working on PRODUCT 20-138 AND 20-139 low pressure reservoirs.

The Techwest Model M Cement Retainer (Product 138) and the TechWest Model W

SPECIFICATIONS

Cement Retainer (Product 20-139) are rugged, compact, Cement Retainers engineered

20-138 and 20-139 SPECIFICATION GUIDE CASING OD Weight Min. ID Max. ID in/mm 4 1/2

lb/ft - kg/m 9.5- 15.1

in/mm 3.826

in/mm 4.090

114.3

14.14 -22.47

97.2

103.9

5

11.5- 18.0

4.276

4.560

127. 00

17.11 - 26.78

108.6

115.8

5 1/2

13.0- 23.0

4.670

5.118

139.7

19.34 - 34.22

118.6

129.0

5 3/4

14.0 - 25.2

4.890

5.290

146.05

20.83 - 37.50

124.2

134.4

6 5/8

17.0- 34.5

5.575

6.135

168.28

25.30 - 51.34

144.6

155.8

7

17.0- 35.0

6.004

6.538

177. 80

25.30 - 52.08

152.5

166.1

7

38.00

5.920

5.920

177. 80

56.44

150.4

150.4

7 5/8

20.0- 39.0

6.625

7.125

193.68

29.76 - 58.03

168.3

181.0

8 5/8

24.0-49.0

7.511

8.097

224.48

35.71 - 72.90

190.8

205.7

9 5/8

29.3-61.1

8.375

9.063

224.48

43.60 - 90.92

212.7

230.2

10 3/4

32.75- 60.7

9.660

10.192

273. 05

48.73 - 90.32

245.4

258.9

11 3/4

60.0- 83.0

10.192

10.772

298.45

89.28- 123.50

258.9

273.6

11 3/4

38.0- 60.0

10.772

11.150

298. 45

56.54 - 89.28

273.6

283.2

13 3/8

48.0-72.0

12.347

12.715

339.73

71.42 - 107.14

313.6

323.0

for trouble free running and setting. The slips, packing elements and other components are positively secured to ensure high speed running of the retainer.

TOOL Product Number OD or on wireline Press.

Ratingthe pre-segmented The Cement Retainer may beMax. set on tubing by replacing

Wireline Set 20-139-0450

Mechanical Set Top Slipin/mm psi with a Shear Ring. The use Top Slip by a one-piece and replacing the Shear Plug 3.593 of a Shear Ring allows the retainer bore to be filled with grease to prevent solids from 20-138-0450 10k

20-139-0500

20-138-0500 The Cement Retainer may be converted to a Bridge Plug10k by removing the bottom Valve

91.3operation of the valve. settling inside and preventing proper

3.937 100.0

Assembly and replacing it with a Cap.

20-139-0550

20-138-0550 FEATURES

20-139-0600 20-139-0650

20-138-0600



20-139-0701

109.5

4.700 119.4

10k 10k

Converts between mechanical (20-138) and wireline set (20-139) by changing top 5.375 20-138-0650 10k slips.

 

20-139-0700

Drillable cast iron design

4.312

136.5

Easily converts to a Bridge Plug

5.688

20-138-0700  Rated to 10k psi (8-5/8’’ and smaller) 144.5

OPERATION 20-138-0701

5.375 136.5

10k 10k

A Ramcharger Setting Tool (Product 10-064) is used to run and mechanically set the

20-139-0750 20-139-0850 20-139-0950 20-139-1050 20-139-1150 20-139-1151 20-139-1338

6.312

20-138-0750 10k Tubing Set Cement Retainer, and to operate the valve after setting.

160.3

The Wireline Cement Retainer is7.125 set with the TechWest B Series Setting Tool (Product 10-

10k

20-138-0850

270, 10-271) or other Baker E-4 181.0 compatible pressure Setting Assemblies.

8.125 The Pressure balanced Sleeve Valve is opened by lowering the tubing and is closed with

8k

20-138-0950

206.4 pick-up. A Shear System prevents the valve from inadvertently opening at any time during running or setting. The Tubing9.440 String may be tested before you squeeze by picking up

5k

20-138-1050

239.8 the tubing to close the valve and applying pressure. The operation of the valve allows pressure the be held on the final9.937 squeeze when working on low pressure reservoirs.

20-138-1150

20-138-1151 20-138-1338

252.4

10.440 265.2

12.000 304.8

4k 4k 3k

RAMCHARGER SETTING TOOL PRODUCT 10-064 The Ramcharger Setting Tool is used to run and set Cement Retainers and Bridge Plugs on tubing or drill pipe. In addition to its setting function, the Ramcharger functions as a Snap Latch Seal Unit after setting a Cement Retainer. When used to run a tubing set Bridge Plug, the bottom sub and seal of the Ramcharger is replaced with a cap.

The Ramcharger features a Drag Block Assembly that are superior in reliability compared to alternative Bow Springs.

OPERATION At setting depth, rotate the tubing 10 turns to the right, releasing the top slips. Pull tension to set the slips. Additional tension will set and pack off the Cement Retainer. Slack off an equivalent amount of weight and repeat pulling tension to ensure the Retainer/Bridge Plug is securely and fully set. To release from the Cement Retainer, pick up to close the valve, and while holding slight tension apply 300 to 400 ft/lb of right hand torque to the tubing to shear the rotational lock screws. The latch is disengaged from the retainer with 8 to 10 right hand turns. An alternate method is to rotate 4 to 5 turns to the right and pick up, approximately 10,000 lbs. over tubing weight which allows the Snap Latch to snap out of the retainer.

PERMANENT

into AND theDRILLABLE retainer

After releasing, the Ramcharger can be re-latched set down weight and removed with approx. 10,000 lbs. tension.

with

SPECIFICATIONS 10-064 SPECIFICATION GUIDE CASING O.D.

in/mm

WEIGHT

TOOL Min ID

Max ID

Product Number

Drag Block Col’psd OD

Drag Block Expn’d OD

in

in

1000 lb

1000 daN

1000 lb

1000 daN

in

mm

20

9.1

30

13.5

2 3/8

60.3

20

9.1

30

13.5

2 3/8

60.3

20

9.1

30

13.5

2 3/8

60.3

20

9.1

30

13.5

2 7/8

73

20

9.1

30

13.5

2 7/8

73

30

13.4

45

20.0

2 7/8

73

30

13.4

45

20.0

3 1/2

88.9

lb/ft

kg/m

in

in

9.5

13.5

3.920

4.090

10-064-0450

3.81

4.32

5

15

18

4.276

4.408

10-064-0500

4.00

4.63

127

11.5

15

4.408

4.560

10-064-0510

4.00

4.88

4 1/2 114.3

5 1/2

17

23

4.670

4.892

10-064-0550

4.50

5.13

139.7

13

17

4.892

5.044

10-064-0560

4.75

5.38

6 5/8

28

32

5.675

5.791

10-064-0650

5.50

6.50

168.3

20

24

5.921

6.049

10-064-0700

5.88

6.75

7

23

38

5.920

6.366

10-064-0700

5.88

6.75

177.8

17

23

6.366

6.538

10-064-0710

6.25

7.12

7 5/8

33.7

39

6.625

6.765

10-064-0750

6.38

7.30

193.7

24

29.7

6.875

7.025

10-064-0760

6.75

7.68

9 5/8

47

53.5

8.535

8.681

10-064-0950

8.25

9.12

244.5

32

43.5

8.755

9.001

10-064-0960

8.63

9.50

Min Tension

Max Tension

EUE Thread

SNAP LATCH SEAL UNIT PRODUCT 10-065 The TechWest Snap Latch Seal Unit is designed for use with the Wireline set Model W Cement Retainer (Product 20-139). It provides positive control of the Cement Retainer Valve, while effectively anchoring and sealing the tubing in the retainer.

The top sub of the Snap Latch Seal Unit acts as a centralizer to ensure the Snap Latch will locate into the retainer bore - even in deviated wells.

OPERATION When the Snap Latch Seal Unit enters the retainer, the bottom Shifter Sub pushes the Retainer Valve open. At the same time the Snap Latch Collet collapses into and engages the latch threads in the top of the retainer, thereby anchoring the tubing to the retainer. The Snap Latch Collet on the Seal Unit is free to move up or down 76mm (3�) on the mandrel, allowing the Retainer Valve to be opened or closed while the Snap Latch Seal Unit is still locked and sealed into the retainer. This feature also allows for pressure testing the tubing string before squeezing. Picking up will close the valve and moving down opens it.

To release the Seal Unit from the retainer it is necessary to pull approximately 4,500 daN (10,000 lbs.) over string weight.

The force PERMANENT required to do this will decrease after repeated usage until it stabilizes at AND DRILLABLE approximately 2,000 daN (5,000 lbs.) force over string weight.

SPECIFICATIONS 10-065 SPECIFICATION GUIDE Casing in/mm 4 1/2 114.3 5 127 5 1/2 139.7 5 3/4 146.1 6 5/8 168.4 7 177.8 7 5/8 193.5 8 5/8 219.1 9 5/8 244.3

Cement Retainer Product No.

Snap Latch Product No.

20-139-0450

10-065-0450

20-139-0500

10-065-0500

20-139-0550

10-065-0550

20-139-0600

10-065-0600

20-139-0650

10-065-0650

20-139-0700

10-065-0700

20-139-0750

10-065-0750

20-139-0850

10-065-0850

20-139-0950

10-065-0950

Centralizer OD

Tool ID

Seal OD

in/mm 3.75 95.2 4.07 103.3 4.5 114.3 5 127 5.25 133.4 5.5 139.7 6 152.4 6.68 169.7 8.12 206.2

in/mm 0.88 22.4 0.88 22.4 0.88 22.4 0.88 22.4 1.25 31.8 1.25 31.8 1.25 31.8 1.25 31.8 1.25 31.8

in/mm 1.375 34.9 1.375 34.9 1.375 34.9 1.375 34.9 2.000 50.8 2.000 50.8 2.000 50.8 2.000 50.8 2.000 50.8

EUE Thread in/mm 2 3/8 60.3 2 3/8 60.3 2 3/8 60.3 2 3/8 60.3 2 7/8 73.0 2 7/8 73.0 2 7/8 73.0 3 1/2 88.9 3 1/2 88.9

RETRIEVAMATIC SERVICE PACKER Product No. BI 410-02 DESCRIPTION & APPLICATION The BOTIL Model “BEA” Retrievamatic Service Packer is a retrievable stimulation and work over packer. Model “BEA” Retrievamatic is used in all types of squeeze cementing, casing testing, formation fracturing and high-pressure acidizing with subsequent testing. It is a full-opening, set – down packer with piston-type hold down buttons, actuated by pressure from below and a three- section packing element system.

FEATURES / BENEFITS • Large bypass area permits circulation around and through the tool while running in; straight pickup equalizes pressure across hold-down buttons instantly.

• Proven face seal unloader controls the bypass, eliminating the need for mechanical locks and rotation.

• Bypass running completely through the packer isolates buttons from tubing pressure surges, reducing chance of dulling.

• Hold-down buttons maintain pack off during high-pressure operations from below • Proven packing element system • Rocker slips set with only 3⁄4 turn, straight pickup to retrieve

SPECIFICATION GUIDE O.D.

In mm

Casing Weight(A)

Lb/ft

I.D. Range in which Packer May Be Run Min In mm

Size

Max In mm

In mm BI 47B2

7 177.80

26-29

6.136 155.8

6.276 159.4 BI 47B2 x 3

29-32

6.094

6.184

Nom. I.D.

BI 47 B2 M X 3

2.41 61.21 3.00 76.20 3.00

Packer Gage & Guide Ring O.D. In mm

5.968 151.59

5.900

Thread Specification(B) Box Up x Pin Down In mm 2-7/8 O.D. EU. 8RD 73. 02 3-1/2 O.D. EU. 8RD 88.90 3-1/2 O.D. EU. 8RD 88.90

BOTIL MODEL “BP-2” SET DOWN UNLOADER SUB Product No. BI 675-06 DESCRIPTION & APPLICATION The BOTIL Model “BP-2” Set Down Unloading Sub is used to equalize tubing annulus pressure when using a set down packer. A face type seal prevents communication between the tubing and annulus when the sub is in closed position; the sub is held open or closed by collet fingers. Since the sub is essentially pressure balanced, normal set down weight required for operation of the tool run below the sub is sufficient to maintain closed position when run with the proper size tubing.

MODEL “BC-1” FULL-BORE RETRIEVABLE CEMENTER Product No. BI 410-01 This is a squeeze Packer with a full bore, used for pressurising operations such as casing testing, formation fracturing, squeeze cementing and highpressure acidising with subsequent testing. It is particularly useful when set-down weight is limited.

It is run with the Model BR Up-strain Unloading Sub (Product No. BI 675-05) to allow equalisation of Tubing and annulus pressure. The running-in string may be tested with the Model BN Full Bore Tubing Tester (Product No. BI 672-01).

SPECIFICATION GUIDE O.D.

In mm

Casing Weight(A)

Lb/ft

I.D. Range in which Packer May Be Run Min In mm

Size

Max In mm

In mm BI 47B2

7 177.80

26-29

6.136 155.8

6.276 159.4 BI 47B2 x 3

29-32

6.094

6.184

Nom. I.D.

BI 47 B2 M X 3

2.41 61.21 3.00 76.20 3.00

Packer Gage & Guide Ring O.D. In mm

5.968 151.59

5.900

Thread Specification(B) Box Up x Pin Down In mm 2-7/8 O.D. EU. 8RD 73. 02 3-1/2 O.D. EU. 8RD 88.90 3-1/2 O.D. EU. 8RD 88.90

MODEL “BR-3” DOUBLE-GRIP RETRIEVABLE CASING PACKER Product No. OIL-BR3MPK-00000000-B05 “ BR-3 Double-Grip” is a truly versatile set-down type Packer. Proven by its world-wide use, it performs reliably in production, stimulation and testing operations. FEATURES/BENEFITS • Hydraulic button-type hold down located below the by- pass valve.

• Unique, built-in, “differential lock” helps keep the by- pass valve closed.

• Effective By-pass design speeds equalization and resists swab-off.

• Field-proven, three-element packing system and rocker-type slips.

TO SET THE PACKER: The “BR-3” is set by picking up, rotating to the right and then slacking off on the tubing. Set-down weight closes and seals the bypass valve, sets the slips and packs- off the Packing Elements.

TO RELEASE THE PACKER: Picking up the tubing releases the Packer (no rotation required). When the tubing is raised, the by-pass valve opens to permit circulation through and around the Packer When the tubing string is raised the full length of the Packer, the J-pins (on the bottom sub) are oriented for automatic re-engagement. By then lowering the tubing slightly, the J-pin engages the J-slot thus assuring complete release and preventing accidental resetting while retrieving the Packer.

SPECIFICATION GUIDE O.D.

In mm

Casing Weight(A)

Lb/ft

I.D. Range in which Packer May Be Run Min In mm

Size

Max In mm

In mm BI 47B2

7 177.80

26-29

6.136 155.8

6.276 159.4 BI 47B2 x 3

29-32

6.094

6.184

Nom. I.D.

BI 47 B2 M X 3

2.41 61.21 3.00 76.20 3.00

Packer Gage & Guide Ring O.D. In mm

5.968 151.59

5.900

Thread Specification(B) Box Up x Pin Down In mm 2-7/8 O.D. EU. 8RD 73. 02 3-1/2 O.D. EU. 8RD 88.90 3-1/2 O.D. EU. 8RD 88.90

‘QUE’ SQUEEZE PACKER This technical unit is written for internal use only for Cardium Tool Services Inc. The information presented is the most accurate available as of the writing date and is not guaranteed. This information is subject to change without notice.

PRODUCT DESCRIPTION The ‘QUE’ product is a mechanical set, double grip, compression type packer capable of holding pressure from above or below. This tool is used during acidizing, fracturing and cementing operations as well as for casing integrity testing.

FEATURES • large I.D. through tool • large hydraulic hold down buttons • built in unloader • large by-pass area • large number of drag blocks for good control ! caged slips • jay control mechanism

SPECIFICATION GUIDE O.D.

In mm

Casing Weight(A)

Lb/ft

I.D. Range in which Packer May Be Run Min In mm

Size

Max In mm

In mm BI 47B2

7 177.80

26-29

6.136 155.8

6.276 159.4 BI 47B2 x 3

29-32

6.094

6.184

Nom. I.D.

BI 47 B2 M X 3

2.41 61.21 3.00 76.20 3.00

PRESSURE RATINGS

Packer Gage & Guide Ring O.D. In mm

5.968 151.59

5.900

Thread Specification(B) Box Up x Pin Down In mm 2-7/8 O.D. EU. 8RD 73. 02 3-1/2 O.D. EU. 8RD 88.90 3-1/2 O.D. EU. 8RD 88.90

TSW BRIDGE PLUG The T727 TSW is a high pressure retrievable bridge plug suitable for use in selective treating and testing of multiple zones. It is typically set mechanically on tubing or drillpipe but can be supplied in an electric line set version for special applications. The design includes a large internal by-pass area, to prevent swabbing while running or retrieving. The by-pass closes off during the setting process and re-opens AS RETRIEVABLE BRIDGE PLUG during the retrieving priorEUE to the SIZE process : 7” W/ 2-3/8” (PINupper DOWN)slips releasing so as to equalize pressure across the plug before it unsets. It can be set in tension making it ideal for use in both shallow applications, such as testing wellheads, and in deep set operations.

Manual No: ACT-725-7000-148 Revision: M Revision Date: 05/18/2016

A) DESCRIPTION

Features and Benefits

The AS Retrievable Bridge Plug is a high pressure plug for multiple zone and selective single zone operations such as acidizing, fracturing, cementing and testing. It features a large internal by-pass to reduce swabbing when running retrieving. Thefor by-pass closes setting of the plug and opens prior to releasing the upper slips to equalize •and Suitable use at during any the depth. when unsetting. The by-pass is located directly below the upper slips to help wash debris when the by-pass •pressure

Standard tool is set and released by a 1⁄4 turn to is open.

the right and pipe reciprocation.

This tool can be set in tension or compression. It can be set shallow in unsupported casing to contain pressure while working Other J-slot configurations are available. on wellhead equipment.

It can be set in tension making it ideal for setting shallow to test wellhead equipment also deep,by-pass high-pressurearea wells. to prevent swabbing.

•and Large ASWpressure Retrievable Bridge Plug isthe a version of theisASequalized Retrievable Bridge Plug that allows the plug to be set on • The The across tool before wireline or with a hydraulic setting tool and retrieved with tubing. It cannot be reset in the wellbore once it is unset, unsetting. but it can be pulled, re-dressed and run again. A Wireline Adapter Kit is required for this version.

•CAUTION Available in electric line set version.

1: When running this tool with a packer, make sure the J-slots in the plug, running/ retrieving tool, and packer are all compatible.

• An emergency shear release mechanism is part of the.

B) RELATED TOOLS (sold separately)

B-1) 7” X 2-7/8” Spring Loaded Retrieving Tool (P/N 57770)

Especification Guide C) SPECIFICATION GUIDE CASING SIZE (INCHES)

WEIGHT (LBS/FT)

RECOMMENDED HOLE SIZE (INCHES)

TOOL OD (INCHES)

THREAD CONNECTION PIN DOWN

PART NUMBER

17.0 – 26.0

6.276 – 6.538

5.969 6.062*

2-3/8 EUE

72570RR 72570RRH1 72570RRV2

26.0 – 32.0

6.094 – 6.276

5.875

2-3/8 EUE

72571RR 72571RRH1 72571RRV2

7

*Maximum OD is over retracted drag blocks.

Elastomer Trim Options: 1HSN, 2Viton

NOTE1: Tool listed is right-hand set / right-hand release. Additional J-slot designs are available.

DIFFERENTIAL PRESSURE (MAX)

10,000 PSI

HANGING WEIGHT ON SET TOOL (MAX)

80,000 LBS†

TENSILE LOAD THRU TOOL (MAX)

80,000 LBS

TORQUE THRU TOOL (MAX)

2,000 FT-LBS

MODEL Ti TENSION PACKER Product No: 20-304 The Model Ti Tension Packer is a compact, economical, rugged, resettable packer that is run on jointed or coiled tubing. The packer is set and released with axial (upwards and downwards) motion, making it ideal for coil tubing use, or when rotating conventional tubing is impractical.

The indexing Auto-J allows for reseattability without surfacing the tool, making it ideal for multi-zone tratments or fracturing. The Ti packer has the versitility to run in compression or tension, depending on the tool orientation. The packer is ran in tension when pressure differential from below is expected, and ran it in compression when pressure differential from above is expected. The packer is easily converted into an anchor when used with a no-element spacer.

The packer features an adjustable shear Safety Release System allowing for packer retreival in the event normal unsetting fails. The Shear Release System is located below the packing element using standard factory set shears. When running on conventional tubing, a Ti5 packer (Product No. 20-302) is reccomended. The Ti5 has a longer stroke length in the J-slot allowing to make tubing connections without pre-setting the packer.

FEATURES • • • • • •

Sets/Unsets with only axial (up-down) motion.

Resettable Auto-J for service/completion work.

Can run upside down in compression or without element as an anchor.

Elastomer and metallurgical options available for hostile environments.

Compact No. 20-304 MODEL Ti TENSION Redress kits available Rev: J PACKER SPECIFICATIONS

Date: Mar 2018 Page 2 of 6

SPECIFICATIONS SPECIFICATION GUIDE - T Packer Series (20-302, 304, 306, 307) CASING OD

PACKER

WEIGHT

ID

OD

MIN ID

Connection

Product No

9.6

1.000 NPT

20-302/4/5/6/7-0200

0.750

19.1

1.500 NPT

20-302/4/5/6/7-0250

71.4

1.380

35.05

1.500 NPT

20-302/4/5/6/7-0350

3.50

88.9

1.610

40.89

1.900 EUE

20-302/4/5/6/7-0440

3.80

96.5

1.940

49.1

2 3/8 EUE

20-302/4/5/6/7-0450

lb / ft

kg / m

in

mm

in

mm

in

mm

4.7

7.0

1.995

50.7

1.81

46.0

0.378

2 7/8

6.5

9.7

2.441

62.0

73

6.4

9.5

2.441

62.0

2.20

55.9

3 1/2 88.9

10.2

15.2

2.992

76.0

7.7

11.5

3.068

77.9

2.81

2 3/8 50.8

15.1

22.6

3.826

97.2

4 1/2

13.5

20.1

3.920

99.6

114.3

11.6

17.3

4.000

101.6

9.5

14.1

4.090

103.9

RTTS® SAFETY JOINT THE RELIABLE SOLUTION FOR CONTINGENCY STRING RECOVERY The RTTS® safety joint is a recommended backoff device that helps prevent unintentional operations. In the event that the lower string becomes stuck during operations, the safety joint will release the workstring and tools.

FEATURES AND BENEFITS • Positive sequence of operation helps prevent premature release • Tools above the safety joint can be retrieved when string is stuck, preventing tools from being lost in the well, sidetracked or redrilled OPERATION The RTTS safety joint is run immediately above the RTTS packer to allow for optimized recovery of the workstring.

Before the safety joint can be used, a tension sleeve located on the bottom of the lug mandrel must first be parted by pulling up on the workstring. This tension sleeve must be considered whenever additional tools or workstring is run below the packer. Excessive weight can cause unexpected parting of this sleeve during the tool make up process.

After the tension sleeve has parted, the safety joint is released by righthand torque, while the workstring is reciprocated a specified number of cycles. By incorporating the RTTS safety joint in your workstring, you can help ensure that even if your bottomhole assembly becomes stuck in the well, it can be recovered safely and efficiently with minimum downtime.

MAGNUSPAK-VI HYDRAULIC SET PACKER Magnus-VI Hydraulic-set retrievable packer is designed for low- to medium-pressure applications. The short body length makes it ideal for low-angle deviations and horizontal applications. This compact packer has a single piece mandrel.

Straight-pull release and shear-out features provide quick release and easy retrieval. It is ideal for use in deviated wells, multiple-packer completions, and applications where the packer is to be set after the wellhead is installed. Because no mandrel movement occurs during setting, the Magnus-VI Packer may also be used in multiple-packer completions where all packers are set simultaneously.

Set with a pressure differential, the Magnus –VI Hydraulic Set Packer has an easily adjustable setting-pressure feature and a bi-directional mechanical slip system.

FEATURES: • Large internal by-pass PACKER SYSTEMS • Slips being positioned below rubber element are protected from well debris.

• Temperature rating up to 350 Degree F. •MagnusPak-VI Three (3) element packing system •Hydraulic Available Metallurgy 9Cr. L-80 and 4140 L-80 Set Packer • Elastomers available: Nitrile, HNBR, HSN, Viton, Aflas Casing & Packer Dimension Table

Note*: Drill Pipe connections are also available on request.

Elastomers available: Nitrile, HNBR, HSN, Viton, Aflas