Section 1 — Brochure/Flier Marketing
Builder Hardware Lock Pins Electrical Precision Shipboard Equipment Fasteners Nuts | Bolts | Rivets
C46400 Alloy from Concast Concast Metal Products Co. has been successfully satisfying a broad range of applications and industries with our wrought products. Specifically, C46400, naval brass, is widely used in marine construction where a strong, corrosion resistant and hard material is required.
Industrial Aircraft Turnbuckle Barrels | Balls | Bearings Valve Stems | Condensor Plates | Hub Cones Pressure Vessels | Bushings | Heat Exchanger Tubes
C46400 Alloy Similar or Equivalent Specification CDA
ASTM
C46400
B21
ASARCON
SAE
AMS
FEDERAL
J461, J463
MILITARY
OTHER
QQ-B-639
C46400 Alloy Chemical Composition Alloy
Cu%
C46400
59.062.0
Al%
Sb%
As%
Cr%
Co%
Fe%
Pb%
0.10
0.20
Mn%
Ni%
P%
Si%
S%
Sn%
Zn%
0.501.00
Remainder
Chemical Composition according to ASTM B21/B21M-12. Note: Single values represent maximums.
C46400 Alloy Physical Properties
Marine Shafting | Turnbuckles | Hardware | Propeller Shafts
US Customary
Metric
Melting Point - Liquidus
1650˚ F
899˚ C
Melting Point - Solidus
1630˚ F
888˚ C
0.304 lb/in3 at 68˚ F
8.4 gm/cm3 at 20˚ C
8.41
8.41
39.9 ohms-cmil/ft at 68˚ F
4.32 microhm-cm at 20˚ C
26% IACS at 68˚ F
0.151 MegaSiemens/cm at 20˚ C
Density Specific Gravity Electrical Resistivity Electrical Conductivity
Ordnance Missile Components
Thermal Conductivity Coefficient of Thermal Expansion
116.0 W/m at 20˚ C 20.4 ·10-6 per ˚C (20˚-300˚ C)
0.09 Btu/lb/˚F at 68˚ F
377.1 J/kg at 293˚ K
Modulas of Elasticity in Tension
15000 ksi
103422 MPa
Modulus of Rigidity
56000 ksi
38611 MPa
Specific Heat Capacity
Plumbing Fittings
67 Btu · ft/(hr · ft2 · ˚F) at 68˚ F 11.8 · 10-6 per ˚F (68˚-572˚ F)
Physical Properties provided by CDA.
C46400 Alloy Mechanical Properties SIZE RANGE: ½" AND UNDER Tensile Strength, min
Yield Strength, at .5% extension under load, min
Elongation, 4x diameter or specimen thickness
Rockwell “B” Hardness HRB
ksi
MPa
ksi
MPa
%
60
414
27
186
22
Remarks
SIZE RANGE: ½" TO 1" INCLUSIVE ROD Tensile Strength, min
Yield Strength, at .5% extension under load, min
Elongation, 4x diameter or specimen thickness
Rockwell “B” Hardness
ksi
MPa
ksi
MPa
%
HRB
60
414
27
186
25
60-80
Elongation, 4x diameter or specimen thickness
Rockwell “B” Hardness
Remarks
Mechanical Properties according to ASTM B21/B21M-12 H02 HALF-HARD TEMPER
SIZE RANGE: OVER 1" TO 2" INCLUSIVE ROD Tensile Strength, min
Yield Strength, at .5% extension under load, min
ksi
MPa
ksi
MPa
%
HRB
58
400
26
179
25
55-80
Elongation, 4x diameter or specimen thickness
Rockwell “B” Hardness
Remarks
SIZE RANGE: OVER 2" TO 3" INCLUSIVE ROD Tensile Strength, min
Standard Stocked
|
Low Lead
P.O. Box 816 | Mars, PA 16046 800.626.7071 | 724.538.3956 fax www.concast.com | sales@concast.com
Yield Strength, at .5% extension under load, min
ksi
MPa
ksi
MPa
%
HRB
54
372
25
172
25
55-80
All Concast plants are ISO 9001:2008 certified
www.concast.com
P.O. Box 816 | Mars, PA 16046 800.626.7071 | 724.538.3956 fax www.concast.com | sales@concast.com All Concast plants are ISO 9001:2008 certified
1
Remarks
Section 1 — Brochure/Flier Marketing
C64200 Alloy Similar or Equivalent Specification Automotive Valve Guides | Automobile Engines Electrical Pole Line Hardware
C64200 Alloy from Concast Concast Metal Products Co. has been successfully satisfying a broad range of applications and industries with our wrought products. Specifically, our C64200 aluminum bronze alloy is used in the power generation/energy, aerospace, automotive markets and industrial applications.
Fasteners Nuts | Bolts
CDA
ASTM
ASARCON
C64200
ASTM B150
SAE
AMS
FEDERAL
SAE J461, SAE J463
AMS 4634B
QQ-C-465B AMD1
MILITARY
OTHER
C64200 Alloy Chemical Composition Alloy
Cu%
Sn%
Pb%
Zn%
Fe%
Ni%
Al%
Mn%
Si%
As%
C64200
Remainder
0.20
0.05
0.50
0.30
0.25
6.307.60
0.10
1.502.20
0.15
Chemical Composition according to ASTM B150/B150M-12. Note: Single values represent maximums.
C64200 Alloy Physical Properties
Industrial Valve Bodies | Valve Stems | Gears Cams | Valve Components
US Customary
Metric
Melting Point - Liquidus
1840˚ F
1004˚ C
Melting Point - Solidus
1800˚ F
982˚ C
0.278 lb/in3 at 68˚ F
7.7 gm/cm3 at 20˚ C
7.690
7.69
113 ohms-cmil/ft at 68˚ F
18.79 microhm-cm at 20˚ C
8% IACS at 68˚ F
0.047 MegaSiemens/cm at 20˚ C
Density Specific Gravity
Marine Hardware
Electrical Resistivity Electrical Conductivity Thermal Conductivity Coefficient of Thermal Expansion Specific Heat Capacity Modulas of Elasticity in Tension Modulus of Rigidity
26 Btu · ft/(hr · ft2 · ˚F) at 68˚ F
45.0 W/m at 20˚ C
10 · 10-6 per ˚F (68˚-572˚ F)
18.0 ·10-6 per ˚C (20˚-300˚ C)
0.090 Btu/lb/˚F at 68˚ F
377.1 J/kg at 293˚ K
16000 ksi
110000 MPa
6000 ksi
41370 MPa
Physical Properties provided by CDA.
C64200 Alloy Mechanical Properties SIZE RANGE: ½" AND UNDER Tensile Strength, min
Yield Strength, at .5% extension under load, min
Elongation, 4x diameter or specimen thickness
Rockwell “B” Hardness HRB
ksi
MPa
ksi
MPa
%
90
620
45
310
9
Remarks
SIZE RANGE: ½" TO 1" ROD Tensile Strength, min
Yield Strength, at .5% extension under load, min
Elongation, 4x diameter or specimen thickness
Rockwell “B” Hardness
ksi
MPa
ksi
MPa
%
HRB
85
585
45
310
12
80-100
Remarks
Mechanical Properties according to ASTM B150/B150M-12 HR50 DRAWN AND STRESS RELIEVED TEMPER
SIZE RANGE: OVER 1" TO 2" INCLUSIVE ROD Tensile Strength, min
Yield Strength, at .5% extension under load, min
Elongation, 4x diameter or specimen thickness
Rockwell “B” Hardness
ksi
MPa
ksi
MPa
%
HRB
80
550
42
290
12
80-100
Elongation, 4x diameter or specimen thickness
Rockwell “B” Hardness
Remarks
SIZE RANGE: OVER 2" TO 3" INCLUSIVE ROD Tensile Strength, min
C64200 is a Concast Standard-Stocked Alloy
P.O. Box 816 | Mars, PA 16046 800.626.7071 | 724.538.3956 fax www.concast.com | sales@concast.com
Yield Strength, at .5% extension under load, min
ksi
MPa
ksi
MPa
%
HRB
75
575
35
240
15
70-95
All Concast plants are ISO 9001:2008 certified
www.concast.com
P.O. Box 816 | Mars, PA 16046 800.626.7071 | 724.538.3956 fax www.concast.com | sales@concast.com All Concast plants are ISO 9001:2008 certified
2
Remarks
Section 1 — Brochure/Flier Marketing
C63000 Alloy Similar or Equivalent Specification CDA
ASTM
C63000
B150
ASARCON
SAE
AMS
FEDERAL
MILITARY
SAE J461, SAE J463
4640H
QQ-C-465B AMD1
OTHER
Industrial Applications Valve Seats | Plunger Tips | Shafting | Pump Parts Condenser Tube for Power Stations and Desalting Units
C63000 Alloy from Concast
Cams | Gears | Valve Guides | Aircraft Parts
C63000 Alloy Chemical Composition Alloy
Cu%
Sn%
Zn%
Fe%
Ni%
Al%
Mn%
Si%
C63000
Remainder
0.20
0.30
2.004.00
4.005.50
9.0011.00
1.50
0.25
Pump Shafts | Structural Members | Valve Balls
Chemical Composition according to ASTM B150/B150M-12. Note: Single values represent maximums.
Corrosion-Resistant Articles | Bushings | Bearings Concast Metal Products Co. has been successfully satisfying a broad range of applications and industries with our wrought products. Specifically, our C63000 nickel aluminum bronze alloy is used in the power generation/energy, power transmission and control, marine and aerospace markets.
Hydraulic Bushings for Earth-Moving Equipment
C63000 Alloy Physical Properties
Tanks | Heat Exchanger Flanges Heat Exchangers | Headers
US Customary
Metric
Melting Point - Liquidus
1930˚ F
1054˚ C
Melting Point - Solidus
1895˚ F
1035˚ C
0.274 lb/in3 at 68˚ F
7.58 gm/cm3 at 20˚ C
7.58
7.58
116 ohms-cmil/ft at 68˚ F
19.28 microhm-cm at 20˚ C
70% IACS at 68˚ F
0.041 MegaSiemens/cm at 20˚ C
Density
Marine Applications
Specific Gravity Electrical Resistivity
Nuts | Propellers | Pump Parts | Bolts
Electrical Conductivity Thermal Conductivity Coefficient of Thermal Expansion Specific Heat Capacity Modulas of Elasticity in Tension Modulus of Rigidity
22.60 Btu · ft/(hr · ft2 · ˚F) at 68˚ F
39.1 W/m · ˚K at 20˚ C
90 · 10-6 per ˚F (68˚-572˚ F)
16.2 · 10-6 per ˚C (20˚-300˚ C)
0.090 Btu/lb/˚F at 68˚ F
377.1 J/kg at 293˚ K
17500 ksi
121000 MPa
6400 ksi
44130 MPa
Physical Properties provided by CDA.
C63000 Alloy Mechanical Properties SIZE RANGE: ½" TO 1" ROD Tensile Strength, min
Yield Strength, at .5% extension under load, min
Elongation, 4x diameter or specimen thickness
Brinell Hardness
ksi
MPa
ksi
MPa
%
min to max BHN
110
760
68
470
10
201 to 248
Elongation, 4x diameter or specimen thickness
Brinell Hardness
Remarks
SIZE RANGE: OVER 1" TO 2" INCLUSIVE ROD Tensile Strength, min
Yield Strength, at .5% extension under load, min
ksi
MPa
ksi
MPa
%
min to max BHN
110
760
60
415
10
201 to 248
Elongation, 4x diameter or specimen thickness
Brinell Hardness
Remarks
HR50 DRAWN AND STRESS RELIEVED TEMPER
SIZE RANGE: OVER 2" TO 3" INCLUSIVE ROD Tensile Strength, min
C63000 is a Concast Standard-Stocked Alloy
P.O. Box 816 | Mars, PA 16046 800.626.7071 | 724.538.3956 fax www.concast.com | sales@concast.com
Yield Strength, at .5% extension under load, min
ksi
MPa
ksi
MPa
%
min to max BHN
105
725
55
380
10
187 to 241
All Concast plants are ISO 9001:2008 certified
www.concast.com
P.O. Box 816 | Mars, PA 16046 800.626.7071 | 724.538.3956 fax www.concast.com | sales@concast.com All Concast plants are ISO 9001:2008 certified
3
Mechanical Properties according to ASTM B150/B150M-12
Remarks
Section 1 — Brochure/Flier Marketing
Wrought Products Typical Uses
Wrought Products from Concast Concast Metal Products Co. has been successfully satisfying a broad range of applications and industries with our wrought drawn alloys. Our wrought products are brought to final dimensions by one or more cold drawing operations with suitable intermediate anneals when necessary. After the final draw, the rods are straightened mechanically and cut to the desired length.
Improved Size and Consistency Reduces machining losses Dimensional consistency within each bar Dimensional consistency from bar to bar Tighter size and section tolerances Increased Mechanical Properties Yield and tensile strength Hardness (may reduce the need for hardening) Improved Machinability and Productivity Allows for higher feeds and speeds and improved machined finish Increased machining rates Longer tool life Improved yield
Architecture
Automotive
Building
Consumer
Electrical
Fasteners
Industrial
Marine
Ordnance
Plumbing
grillwork bridge bearing plates
tanks heater cores thermostats electrical connectors
locks door knobs hinges kick plates finish hardware
watch parts costume jewelry coinage symbols lamps
connectors motors wire conduit wire connectors
screws nuts cotter pins washers nails rivets
springs chains welding rods gears clips clutch discs
nuts propellers propeller shafts pump parts hardware
ammunition cartridge cases
faucets
shells ammunition mechanical housings
Wrought Products Copper Alloy UNS No
ASTM Spec
Product Description
Round Size Range
Hex/Oct Size Range
C31400*
B140
H02
H04
Leaded Commercial Bronze
0.375 to 2.5
0.375 to 2.0
C31600
B140
H02
H04
Leaded Commercial Bronze (nickel-bearing)
0.375 to 2.5
0.375 to 2.0
C46400*
B21
H02
Naval Brass
0.500 to 2.75
0.500 to 2.75
C51000*
B139
H04
Phosphorous Bronze Rod
0.375 to 2.5
0.375 to 2.0
C52100
B139
H04
Phosphorous Bronze Rod
0.375 to 2.5
0.375 to 2.0
C53400
B139
H04
Phosphor Bronze
0.375 to 2.5
0.375 to 2.0
C54400*
B139
H04
Phosphor Bronze
0.375 to 2.5
0.375 to 2.0
C63000*
B150
HR50
Aluminum Bronze
0.375 to 10.0
consult mill
C64200*
B150
HR50
Aluminum Bronze
0.1875 to 6.0
consult mill
C65100
B98
Low-Silicon Bronze
0.375 to 2.5
0.375 to 2.0
Manganese Bronze
0.75 to 2.0
0.75 to 2.0
Temper/s
H02
H04
H08
H06
H02
C67300* *standard-stocked alloys
Wrought Products Chemical Composition Copper Alloy UNS No
Other available alloys C31600 | C52100 | C53400 | C65100
www.concast.com
Sb%
As%
Cr%
Co%
Fe%
Pb%
0.10
1.302.50
C46400
0.10
0.20
C51000
Remainder
0.10
0.05
C52100
Remainder
0.10
C53400
Remainder
0.10
C54400
Remainder
C63000
Remainder
0.005
0.10 2.004.00
0.05 0.801.20 3.004.00
C64200
Remainder
0.005
0.30
C65100
Remainder 87.5090.50
0.80
C31600
P.O. Box 816 | Mars, PA 16046 800.626.7071 | 724.538.3956 fax www.concast.com | sales@concast.com
Al%
87.5090.50 87.5090.50 59.0062.00
C31400
Standard-stocked alloys C31400 | C46400 | C51000 | C54400 | C63000 | C64200 | C67300
Cu%
C67300
0.10
0.25
All Concast plants are ISO 9001:2008 certified P.O. Box 816 | Mars, PA 16046 800.626.7071 | 724.538.3956 fax www.concast.com | sales@concast.com All Concast plants are ISO 9001:2008 certified
4
0.50
Mn%
Ni% 0.70 0.701.20
1.90
1.50
4.005.50
0.05
0.10
0.25
0.05 0.403.00
0.70 2.003.50
0.25
P%
Si%
S%
Sn%
Zn% Remainder
0.040.10 0.040.10 0.030.35 0.030.10 0.030.35 0.010.50
Remainder 0.501.00 4.205.80 7.009.00 3.505.80 3.504.50 0.25 1.502.20 0.802.00 0.501.50
Remainder 3.00 0.20 0.30 1.504.50
0.20
0.30
0.20
0.50 1.50
0.30
Remainder
Section 1 — Brochure/Flier Marketing
Aerospace-Related Products Copper Alloy UNS No.
Material Description
Benefits
Applications
Requires low coefficent of friction, moderate strength and good electrical conductivity
aircraft bushings, bearings
B139
4625
Phosphor Bronze
C63000*
B150
4640
Nickel Aluminum Bronze
Uniform structures (eliminates hard spots)
C64200*
B150
4631
Aluminum Bronze
Hardness, good corrosion resistance, high wear resistance
Favorable mechanical properties
C86300*
B505
Manganese Bronze
Hardness, good corrosion resistance, high wear resistance
high load gear, bearing applications
C86500
B505
High-Strength Yellow Brass
Hardness, good corrosion resistance, high wear resistance
high load gear, bearing applications
C90300*
B505
Tin Bronze
Good corrosion resistance to sea water, high wear resistance
aircraft landing gear bushings
C90500
B505
4845
Tin Bronze
aircraft bushings and bearings
C90700
B505
4845
Tin Bronze
aircraft accessory drives
C93700
B505 B144, 3A
High-Leaded Tin Bronze
aircraft control bushings
C94100
B505
High-Leaded Tin Bronze
Excellent self-lubricating characteristics
aircraft carburetor bearings
C94300
B505
High-Leaded Tin Bronze
Excellent self-lubricating characteristics
aircraft carburetor bearings
C95400*
B505
Aluminum Bronze
High strength, tarnish resistant, good anti-frictional characteristics
bearing brushes, landing gear components on aircrafts, engine components
C95500*
B505
Nickel Aluminum Bronze
aircraft components, landing gear parts
Nickel Aluminum Bronze
aircraft components, landing gear parts
Greater friction and wear properties Excellent machinability and fabrication ability Reasonable cost
Concast Metal Products Co. is a manufacturer of specialty continuous cast copper alloys. Our primary focus is the production of copper alloys in bars, rods, tubes and rectangles, as well as custom alloys. All products are produced with state-of-the-art horizontal and vertical continuous-casting technology.
AMS spec
C51000*
Benefits of Continuous Cast:
Aerospace and Concast
ASTM spec
We offer our customers a wide range of wrought drawn alloys, including C510 phosphor bronze, C630 nickel-aluminum bronze and C642 aluminum bronze.
4860
C95510
4880
aircraft parts, pump shafts, structural members, corrosion resistant articles, landing gear parts
*standard stocked alloys
Aerospace-Related Products Chemical Composition Copper Alloy UNS No C51000
Rem
C64200
C94300
Rem 60.0066.00 55.0060.00 86.0089.00 86.0089.00 88.0090.00 78.0082.00 72.0079.00 67.0072.00
C95400
83.00
C95500
78.00
C95510
78.00
C86500 C90300 C90500 C90700 C93700 C94100
Other available alloys C86500 | C90500 | C93700 | C94100 | C94300 | C95510
www.concast.com
P.O. Box 816 | Mars, PA 16046 800.626.7071 | 724.538.3956 fax www.concast.com | sales@concast.com
Al%
Sb%
As%
Cr%
Co%
Rem
C63000
C86300
Standard-stocked alloys C51000 | C64200 | C63000 | C86300 | C90300 | C95400 | C95500
Cu%
9.0011.00 6.307.60 5.007.50 0.501.50
0.09
Pb%
0.10 2.004.00
0.05
0.30 2.004.00 0.402.00
0.05
Mn%
0.40
P%
Si%
S%
0.030.35 1.50
0.20
Ni%
0.10 2.505.00 0.101.50
4.005.50
0.25 1.502.20
0.25
1.00
0.05
0.005
0.05
0.005
0.20
0.20
0.30
1.00
0.05
0.005
0.05
0.005
0.20
0.15
0.50
0.30
0.005
0.05
0.005
0.50
0.70
0.50
0.10
0.005
0.08
0.005
0.80
0.25
1.00
0.50
0.005
0.08
0.005 10.0011.50 10.0011.50 9.7010.90
0.80
0.15 3.005.00 3.005.00 2.003.50
0.50 8.0011.00 18.0022.00 23.0027.00
1.00
0.08
0.005
0.08
P.O. Box 816 | Mars, PA 16046 800.626.7071 | 724.538.3956 fax www.concast.com | sales@concast.com All Concast plants are ISO 9001:2008 certified
0.20
0.30
0.20
0.50 22.0028.00 36.0042.00 3.005.00 1.003.00
1.00 7.509.00 9.0011.00 10.0012.00 9.0011.00 4.506.50 4.506.00
0.30
1.50
0.30
1.00
0.20
3.50
Zn%
4.205.80
0.20
0.20
0.50
Sn%
1.00
0.005
All Concast plants are ISO 9001:2008 certified
5
Fe%
1.50 3.005.50 4.505.50
0.20
0.50 0.80 1.00 0.80
0.30
Section 1 — Brochure/Flier Marketing
Oil & Gas Industry-Related Products Copper Alloy UNS No. C63000*
ASTM spec
AMS spec
Material Description
B150
AMS4640
Nickel Aluminum Bronze
Benefits
Applications valve seats, plunger tips, condenser desalting units, shafting, pump parts, gears, valve guides, pump shafts, structural members, corrosion resistant articles, hydraulic bushings for
Oil & Gas Applications Bearings Bushings
Oil & Gas Alloys from Concast
earth moving equipment, valve balls, bushings, bearings, welded piping systems C64200*
B150
AMS4634B
Aluminum Bronze
valve bodies, valve stems, gears, cams, valve components,
Hydraulic seals Seals
nuts, bolts, marine hardware C86300*
B505
AMS4862
Manganese Bronze
Torque plugs Concast Metal Products Co. manufactures a wide range of copper alloys specifically engineered for the oil and gas industry. These alloys support the market requirements for oil and gas market applications.
Pump parts
C93200*
Hardness, good corrosion resistance,
bushings, high strength machine parts, hooks, gears,
high wear resistance
propellers, hydraulic cylinder parts, large valve stems, slow speed, heavy load bearings, hydraulic cylinder part
Leaded Tin Bronze
B505
thrust washers, pumps, bushings, machine parts, main spindle bearings, machine tool bearings, bearings for cranes, trunion
PDC matrix binder
bearings, roll neck bearings, fuel pump bushings, water pump bushings, diesel engine wrist pin bushings, pump impellers, general purpose bushings, fittings, pump fixtures, insert bearings, bearings C95400*, C95400HT, C95410
Aluminum Bronze
B505
High strength, tarnish resistant,
bushings, high strength clamps, gears, valves, bearings, valve
good anti-frictional characteristics
bodies, machine parts, valve seats, valve guides, spur gears, heavily loaded worm gears, pump parts
C95500*, C95500HT, C95520HT, C95800
Nickel-Aluminum Bronze
B505
bushings, high strength clamps, gears, valves, bearings, valve bodies, machine parts, valve seats, valve guides, spur gears, heavily loaded worm gears, pump parts
*standard stocked alloys
Oil & Gas Industry-Related Products Chemical Composition Copper Alloy UNS No
Cu%
C63000
Rem
C64200
C93200
Rem 60.0066.00 81.0085.00
C95400
83.00
C95400HT
83.00
C95410
83.00
C95500
78.00
C95500HT
78.00
C95520HT
74.50
C95800
79.00
C86300
Standard-stocked alloys C63000 | C64200 | C86300 | C93200 | C95400 | C95500 Other available alloys C95400HT | C95410 | C95500HT | C95520HT | C95800
www.concast.com
P.O. Box 816 | Mars, PA 16046 800.626.7071 | 724.538.3956 fax www.concast.com | sales@concast.com
Al%
Sb%
9.0011.00 6.307.60 5.007.50 0.005 10.0011.50 11.0011.50 10.0011.50 10.0011.50 10.0011.50 10.5011.50 8.509.50
As%
Cr%
Co%
Pb%
2.004.00 0.30 2.004.00
0.09
0.35
0.05
0.20
All Concast plants are ISO 9001:2008 certified P.O. Box 816 | Mars, PA 16046 800.626.7071 | 724.538.3956 fax www.concast.com | sales@concast.com All Concast plants are ISO 9001:2008 certified
6
Fe%
0.20 3.005.00 3.005.00 3.005.00 3.005.00 3.005.00 4.005.50 3.504.50
0.05 0.20 6.008.00
Mn%
Ni%
1.50
4.005.50
0.10 2.505.00
1.50
0.50
1.50 1.502.50 3.005.50 3.005.50 4.206.00 4.005.00
3.50 0.03 0.03
1.50 0.801.50
S%
1.00
0.50
3.50
Si% 0.25 1.502.20
0.25
1.00
0.50
P%
0.15
0.005
0.15 0.10
0.08
Sn%
Zn%
0.20
0.30
0.20 0.20 6.307.50
0.50 22.0028.00 1.004.00
0.25
0.30
Section 1 — Brochure/Flier Marketing
Hydraulics Alloys from Concast
Hydraulics Applications Piston pumps Gear pumps Thrust plates Seal rings Piston seals
Concast Metal Products Co. manufactures a wide range of copper alloys specifically engineered for the hydraulics industry. These alloys support the market requirements for hydraulics market applications.
Polycrystalline Diamond Compact (PDC) Binder for Drill Bits
PDC Matrix Binder Alloys from Concast
Third-party test confirmation As the largest producer of continuous cast copper alloys in North America, Concast Metal Products Co. offers unparalleled value for specifically engineered PDC matrix binder alloys.
Cu
Zn
Remainder 7.0 to 9.0%
*Standard stocked alloy
P.O. Box 816 | Mars, PA 16046 800.626.7071 | 724.538.3956 fax www.concast.com | sales@concast.com
PDC Matrix Binder Alloys are Standard-Stocked Items
All Concast plants are ISO 9001:2008 certified
www.concast.com
Continuous cast Packaged to your needs Shipped from inventory
Cu53-MB
Available alloys C93200* | C92900 | C93700 | C93800
Metallurgically blended
Ni
Mn
14.0 to 16.0% 23.0 to 25.0%
Total other elements 0.35% Maximum
P.O. Box 816 | Mars, PA 16046 800.626.7071 | 724.538.3956 fax www.concast.com | sales@concast.com
All Concast plants are ISO 9001:2008 certified
www.concast.com
7
Section 1 — Brochure/Flier Marketing
Power Transmission and Control Applications Linear Drives and Gears Production Equipment
PTC Alloys from Concast
Bearings Hydraulics Compressed Air
Concast Metal Products Co. manufactures a wide range of copper alloys specifically engineered for the power transmission and control industry. These alloys support the market requirements for power transmission and control end-use applications.
Standard-stocked alloys C86300 | C90300 | C93200 | C95400 | C95500 Other available alloys C90700 | C91100 | C92900 | C93700 | C93800
P.O. Box 816 | Mars, PA 16046 800.626.7071 | 724.538.3956 fax www.concast.com | sales@concast.com
All Concast plants are ISO 9001:2008 certified
www.concast.com
8
Section 2 — Brochure/Flier Marketing: Updated
Concast Is the Only Domestic Producer of Phosphor Bronze
500 Series Wrought-Drawn Alloys
At Concast Metal Products Co., we provide our customers a high-quality, reliable supply of 500 series wrought-drawn alloys (including 510, 521, 534 and 544) and an on-demand inventory of finished goods.
C673 Manganese Bronze Offers Exceptional Strength, Wear and Corrosion Resistance
C67300 Wrought-Drawn Alloy
At Concast Metal Products Co., we provide our customers a high-quality, reliable supply of C67300 and an on-demand inventory of finished goods.
Typical Uses
500 Series Wrought-Drawn Alloys CATEGORY
PRODUCT
Phosphor Bronze
Fasteners
fasteners, lead screw nuts
B139
Phosphor Bronze
Industrial
C53400
B139
Phosphor Bronze
C54400*
B139
Phosphor Bronze
bearings, bushings, drive shafts, gears/cams, idler pins, piston heads, propeller shafts, pump parts, seal rings, shaft bushings, sleeve bearings, spindles, thrust bearings, wear plates, clutch bearings
Marine
hardware, valve seats
Other
connecting rods
CDA
ASTM
PRODUCT DESCRIPTION
C51000*
B139
C52100
*standard-stocked alloys
• Concast stocks 510 and 544 alloys as standard-stocked products.
| Mars, PA 16046 800.626.7071 | 724.538.3956 fax
• Concast offers you a “Made in the U.S.A.” source of supply.
• Concast stocks 673 alloy as a standardstocked product.
• Concast works to continually improve consistency, increase yields and extend tool life.
• Concast works to continually improve consistency, increase yields and extend tool life.
Call us today at 800.626.7071 or email us
Call us today at 800.626.7071 or email us
at sales@concast.com to find out how we
at sales@concast.com to find out how we
can improve the reliability and profitability
can improve the reliability and profitability
of your wrought alloy supply chain.
of your wrought alloy supply chain.
P.O. Box 816
www.concast.com sales@concast.com
| Mars, PA 16046 800.626.7071 | 724.538.3956 fax P.O. Box 816
All Concast plants are ISO 9001:2008 certified
www.concast.com sales@concast.com
9
All Concast plants are ISO 9001:2008 certified
Section 2 — Brochure/Flier Marketing: Updated
Lead-Free Replacement Product Line
Lead-Free Replacementas Alloys Have Extremely Low-Lead Content, Some as Low as .05%
Lead-Free Replacement Alloys
Chemical Composition (Standard-Stocked Lead-Free Replacement Alloys)
Concast Metal Products Co. manufacturers a broad selection of lead-free replacement alloys for pipes, fittings, faucets and other plumbing components. Lead-Free Replacement Alloys STANDARD-STOCKED ALLOYS
C89835
C90300
C95400
C95500
C95900
Alloy
Cu%
Sn%
Pb%
Zn%
Fe%
Ni%
Sb%
P%
S%
Al%
C89835
85.0089.00
6.007.50
0.05
2.004.00
0.20
1.002
0.35
0.10
0.08
C90300
86.0089.001
7.509.00
0.30
3.005.00
0.20
1.002
0.20
0.053
0.05
C95400
83.00
3.005.00
1.502
10.0011.50
0.50
C95400HT
83.00
3.005.00
1.502
10.0011.50
0.50
C95500
78.00
3.005.00
3.005.501
10.0011.50
3.50
78.00
3.005.00
3.005.501
10.0011.50
3.50
Rem.
3.005.00
0.501
12.0013.50
1.50
C95500HT
OTHER AVAILABLE ALLOYS
C95900
C89320
C89325
C89520
C89831
C89833
C89837
C89844
C90500
C90700
C90800
C90810
C91000
C91300
Alloy
Bi%
0.005
0.005
1.752.75
0.005
0.005
Cu%
Sn%
Pb%
Zn%
Fe%
Ni%
Sb%
P%
S%
Al%
C89320
87.0091.00
5.07.0
0.09
1.00
0.10
1.002
0.35
0.30
0.08
C89325
84.0088.00
9.011.0
0.10
1.00
0.15
1.002
0.50
0.10
C895204
85.0087.00
5.06.0
0.25
4.006.00
0.20
1.00
0.25
C89831
87.0091.00
2.703.70
0.10
2.004.00
0.30
1.002
C89833
86.0091.00
4.006.00
0.09
2.004.00
0.03
C89837
84.0088.001
3.004.00
0.10
6.0010.00
C89844
83.0086.00
3.005.00
0.20
C90500
86.0089.001
9.0011.00
improve the reliability and profitability of your
C90700
88.0090.001
lead-free replacement alloy supply chain.
C90800
• offers you a “Made in the U.S.A.” source of supply. • works to continually improve consistency, increase yields and extend tool life.
Call us today at 800.626.7071 or email us at sales@concast.com to find out how we can
P.O. Box 816
www.concast.com sales@concast.com
Si%
Chemical Composition (Other Lead-Free Replacement Alloys) Si%
Bi%
0.005
0.005
4.06.0
0.08
0.005
0.005
2.703.70
0.05
0.08
0.005
0.005
2.703.70
0.25
0.05
0.08
0.005
0.005
2.703.70
1.002
0.25
0.05
0.08
0.005
0.005
1.702.70
0.30
1.002
0.25
0.05
0.08
0.005
0.005
0.701.20
7.0010.00
0.30
1.002
0.25
0.05
0.08
0.005
0.005
2.04.0
0.30
1.003.00
0.20
1.002
0.20
0.303
0.05
0.005
0.005
10.0012.00
0.50
0.50
0.15
0.502
0.20
0.303
0.05
0.005
0.005
85.0089.001
11.0013.00
0.25
0.25
0.15
0.502
0.20
0.303
0.05
0.005
C90810
Rem.1
11.0013.00
0.25
0.30
0.15
0.502
0.20
0.150.803
0.05
0.005
0.005
C91000
84.0086.001
14.0016.00
0.20
1.50
0.10
0.802
0.20
0.053
0.05
0.005
0.005
C91300
79.0082.001
18.0020.00
0.25
0.25
0.25
0.502
0.20
1.03
0.05
0.005
0.005
Concast Metal Products Co.:
| Mars, PA 16046 800.626.7071 | 724.538.3956 fax
Mn%
All Concast plants are ISO 9001:2008 certified
In determining Cu min., Cu may be calculated as Cu + Ni. Note: Single values represent maximums. 1
10
Ni value includes Co.
2
For continuous castings, P shall be 1.5%, max.
3
Mn%
0.005
0.005
Also, Se value of 0.8-1.1%
4
Section 2 — Brochure/Flier Marketing: Updated
C89835 has a maximum lead content of 0.05%
C89835 Lead-Free Replacement Alloy
Concast Metal Products Co. is now offering more than 100 sizes of C89835, a lead-free C932 replacement, as a standard-stocked inventory item. This alloy is also a suitable replacement for C836 and C844. C89835 Lead-Free Replacement Alloy In Stock Now
Sizes 1.0" to 4.0" OD
Tubes and Solids
Call Mill for Other Sizes
Concast Metal Products Co.: • stocks C89835 as a standard-stocked product. • supports the market demand for lead-free material. • provides C89835 as an alloy compliant with the 3874 Reduction of Lead in Drinking Water Act. • offers you a “Made in the U.S.A.” source of supply. • works to continually improve consistency, increase yields and extend tool life.
Call us today at 800.626.7071 or email us at sales@concast.com to find out how we can improve the reliability and profitability of your lead-free replacement alloy supply chain.
| Mars, PA 16046 800.626.7071 | 724.538.3956 fax P.O. Box 816
www.concast.com sales@concast.com
All Concast plants are ISO 9001:2008 certified
11
Section 3 — Email Marketing
Concast is the industry leader for lead-free replacement alloys.
Lead-Free Do you have the resources you need to meet your goals in 2015?
Replacement Alloys
Wrought Products At Concast Metal Products Co., we believe the best plan begins with a reliable, consistent and on-demand supply base.
Alloy C89835 There’s no LEAD in leader! Concast is the industry leader for LEAD-FREE replacement alloys.
Wrought-Drawn Alloys
What will you do differently in 2015? At Concast Metal Products Co., we believe the best plan begins with a reliable, consistent and on-demand supply base. Consider how our high-quality supply of 500 series wrought-drawn alloys and standard-stocked inventory of 510 and 544 finished goods can change the game for your business this year. Then give us a call.
Concast Metal Products Co. means: Improved Size and Consistency Increased Mechanical Properties Improved Machinability and Productivity
We provide more than 100 sizes of C89835 as standard-stocked items
|
C90300
|
C95400
|
C95500
|
C95900
Concast Is the Only Domestic Producer of Phosphor Bronze. 500 Series Alloys From Concast C52100
|
C53400
|
Sizes 1.0″ to 5.0″ Tubes | Solids
C31400 | C51000 | C54400 | C63000 | C64200
Other Wrought Alloys C31600 | C52100 | C53400 | C65100
These products have extremely low-lead content, some as low as .05%.
Concast fully supports the market demand for lead-free material
Standard-Stocked Wrought Alloys
|
C89835
Concast Metal Products Co. manufactures a broad selection of lead-free replacement alloys for pipes, fittings, faucets and other plumbing components.
500 Series
C51000
Standard-Stocked Lead-Free Replacement Alloys
Compliant with the 3874 Reduction of Lead in Drinking Water Act
C54400
Call us today at
800.626.7071 or email us at
sales@concast.com
Call us today at
Call us today at
800.626.7071
800.626.7071
or email us at
or email us at
sales@concast.com
sales@concast.com
Start 2015 with improved reliability, accessibility and profitability in your wrought alloy supply chain.
Let Concast provide you with improved reliability, accessibility and profitability in your wrought alloy supply chain.
C89835 has a maximum lead content of 0.05% and is a suitable replacement for C932, C836 and C844
w w w . c o n c a s t . c o m
w w w . c o n c a s t . c o m
w w w . c o n c a s t . c o m
Call us today at
800.626.7071 or email us at
sales@concast.com Find out how we can improve the reliability and profitability of your lead-free replacement alloy supply chain.
w w w . c o n c a s t . c o m
12
Section 4 — Postcard Marketing
Industrial Applications Valve Seats | Plunger Tips | Shafting Pump Parts | Cams | Gears Condenser Tube for Power Stations and Desalting Units Pump Shafts | Structural Members
Alloy C630 from Concast
Concast Metal Products Co. 14315 State Route 113 Birmingham, OH 44816
Aircraft Parts | Valve Balls | Headers Corrosion-Resistant Articles | Bushings
Concast is the only domestic producer of alloy C63000. This nickel-aluminum bronze alloy combines corrosion resistance, excellent bearing properties at considerable loads and extremely high strength at a wide range of temperatures.
Hydraulic Bushings for Earth-Moving Equipment Heat Exchanger Flanges | Heat Exchanger Bearings | Tanks | Valve Guides Marine Applications
C63000 Alloy Similar or Equivalent Specification CDA
ASTM
C63000
B150
ASARCON
SAE
AMS
FEDERAL
J461 J463
4640
QQ-C-465B AMD1
MILITARY
OTHER
Nuts | Ship Propellers | Pump Parts Bolts | Propellers
C63000 Alloy Chemical Composition
Plumbing Applications Faucets | Water-Handling Equipment
Alloy
Cu%
C63000
Remainder
Sn%
Pb%
0.20
Zn%
Fe%
Ni%
AL%
Mn%
Si%
0.30
2.004.00
4.005.50
9.0011.00
0.001.50
0.25
Alloy C630 is a Concast Standard-Stocked Alloy
P.O. Box 816
|
800.626.7071 |
Specifications
CDA
ASTM
AMS
C63000
B150
4640
Mars, PA 16046 724.538.3956 fax
sales@concast.com
All Concast plants are ISO 9001 certified
Alloy C630 is a Concast Standard-Stocked Alloy P.O. Box 816
|
800.626.7071 |
Mars, PA 16046 724.538.3956 fax
sales@concast.com
www.concast.com
www.concast.com All Concast plants are ISO 9001 certified
13
Section 4 — Postcard Marketing
Automotive Valve Guides | Automobile Engines Electrical Pole Line Hardware
Alloy C642 from Concast
Concast Metal Products Co. 14315 State Route 113 Birmingham, OH 44816
Fasteners Nuts | Bolts
Our C64200 aluminum bronze alloy is used in the power generation & energy, aerospace and automotive markets and industrial applications.
Industrial Valve Bodies | Valve Stems | Gears Cams | Valve Components Marine Hardware
C64200 Alloy Similar or Equivalent Specification CDA
ASTM
C63000
B150
ASARCON
SAE
AMS
FEDERAL
J461 J463
4631
QQ-C-465B AMD1
MILITARY
OTHER
C64200 Alloy Chemical Composition Alloy
Cu%
Al%
C64200
Remainder
6.307.60
As% 0.09
Fe% 0.30
Pb% 0.05
Mn% 0.10
Ni%
Si%
Sn%
Zn%
0.25
1.502.20
0.20
0.50
Alloy C642 is a Concast Standard-Stocked Alloy
P.O. Box 816
|
800.626.7071 |
Specifications
CDA
ASTM
AMS
C64200
B150
4631
Mars, PA 16046 724.538.3956 fax
sales@concast.com
All Concast plants are ISO 9001:2008 certified
Alloy C642 is a Concast Standard-Stocked Alloy P.O. Box 816
|
800.626.7071 |
Mars, PA 16046 724.538.3956 fax
sales@concast.com
www.concast.com
www.concast.com All Concast plants are ISO 9001:2008 certified
14
Section 4 — Postcard Marketing
Benefits of Continuous Cast: Uniform structures (eliminates hard spots) Favorable mechanical properties Greater friction and wear properties
Aerospace and Concast
Concast Metal Products Co. 14315 State Route 113 Birmingham, OH 44816
Excellent machinability and fabrication ability Reasonable cost
Concast is a manufacturer of specialty continuous cast copper alloys. Our primary focus is the production of copper alloys in bars, rods, tubes and rectangles, as well as custom alloys and wrought drawn products. All products are produced with state-of-the-art horizontal and vertical continuous- casting technology.
We offer our customers a wide range of wrought drawn alloys, including C510 phosphor bronze, C630 nickel-aluminum bronze and C642 aluminum bronze.
Aerospace-Related Products CDA
ASTM
AMS
C51000*
B139
4625
C63000*
B150
4640
C64200*
B150
4634B
C86300*
B505
4862
C86500
B505
4860
C90300*
B505
—
C90500
B505
4845
C90700*
B505
—
C93700
B505
4842
C94100
B505
—
C94300
B505
—
C95400*
B505
—
C95500*
B505
—
—
4880
C95510
*standard stocked alloys
P.O. Box 816
|
800.626.7071 |
Mars, PA 16046 724.538.3956 fax
sales@concast.com
P.O. Box 816
|
800.626.7071 |
Mars, PA 16046 724.538.3956 fax
sales@concast.com
www.concast.com All Concast plants are ISO 9001 certified
www.concast.com All Concast plants are ISO 9001:2008 certified
15
Section 4 — Postcard Marketing
Concast Metal Products Co. 14315 State Route 113 Wakeman, OH 44889
Cast Products Alloy
Wrought Products
Product Description
Alloy C31400*
Leaded Commercial Bronze
C31600
Leaded Commercial Bronze (Nickel-Bearing)
C90300* High Tin Bronze
C51000*
Phosphor Bronze 5% A
C90500
Tin Bronze
C52100
Phosphor Bronze 8% C
C90700
Tin Bronze
C53400
Phosphor Bronze B-1
C91100
Tin Bronze
C92900
Leaded Nickel Tin Bronze
C54400*
Phosphor Bronze B-2
C63000*
Nickel Aluminum Bronze (AMS 4640)
C64200*
Aluminum Bronze (AMS 4634B)
C65100
Low-Silicon Bronze B
C83600
Leaded Red Brass
C86300* Manganese Bronze C86500
Continuous Cast Products C86300 Manganese Bronze C89835 Bismuth Tin Bronze C90300 High Tin Bronze C93200 Leaded Tin Bronze C95400 Aluminum Bronze C95500 Nickel Aluminum Bronze C95900 Aluminum Bronze (All above alloys are standard-stocked items)
Wrought Drawn Products C31400 Leaded Commercial Bronze C46400 Naval Brass C51000 Phosphor Bronze C54400 Phosphor Bronze C63000 Nickel Aluminum Bronze C64200 Aluminum Bronze C67300 Manganese Bronze (All above alloys are standard-stocked items)
Manganese Bronze
C89835* Bismuth Tin Bronze
C93200* Leaded Tin Bronze C93700
High-Leaded Tin Bronze
C93800
High-Leaded Tin Bronze
C94100
High-Leaded Tin Bronze
C94300
High-Leaded Tin Bronze
*standard-stocked alloys
C95400* Aluminum Bronze
Special Alloys Available Upon Request
Product Description
C95500* Nickel Aluminum Bronze
Contact Us for Other Alloys
C95900* Aluminum Bronze *standard-stocked alloys
P.O. Box 816 | Mars, PA 16046 800.626.7071 | 724.538.3956 fax www.concast.com | sales@concast.com All Concast plants are ISO 9001:2008 certified
Concast offers a complete line of stocked and custom-made products. When Concast customers request special alloys and special sizes, we respond with products designed to meet their exacting specifications.
P.O. Box 816 | Mars, PA 16046 800.626.7071 | 724.538.3956 fax www.concast.com | sales@concast.com All Concast plants are ISO 9001:2008 certified
16
Section 5 — Postcard Marketing: Updated
500 Series Wrought-Drawn Alloys
Concast Metal Products Co. 14315 State Route 113 Wakeman, OH 44889
Concast Is the Only Domestic Producer of Phosphor Bronze 500 SERIES Wrought-Drawn Alloys
Concast produces 510, 521, 534 and 544 alloys.
CDA
ASTM
Product Description
Concast stocks 510 and 544 alloys as standard-stocked products.
C51000*
B139
Phosphor Bronze
Concast offers you a “Made in the U.S.A.” reliable source of supply.
C52100
B139
Phosphor Bronze
C53400
B139
Phosphor Bronze
C54400*
B139
Phosphor Bronze
*standard stocked alloys
sales@concast.com P.O. Box 816
|
Mars, PA 16046
|
800.626.7071
w w w . c o n c a s t . c o m 800.626.7071
sales@concast.com
w w w . c o n c a s t . c o m P.O. Box 816 |
Mars, PA 16046
All Concast plants are ISO 9001:2008 certified
17
Section 5 — Postcard Marketing: Updated
Wrought Products from Concast
Concast Metal Products Co. 14315 State Route 113 Wakeman, OH 44889
Improved Size and Consistency Increased Mechanical Properties Improved Machinability and Productivity WROUGHT PRODUCTS
Our wrought products are brought to final dimensions by one or more cold drawing operations with suitable intermediate anneals when necessary. After the final draw, the rods are straightened mechanically and cut to the desired length.
CDA
ASTM
C31400*
B140
Leaded Commercial Bronze
C31600
B140
Leaded Commercial Bronze (nickel-bearing)
C46400*
B21
Naval Brass
C51000*
B139
Phosphor Bronze
C52100
B139
Phosphor Bronze
C53400
B139
Phosphor Bronze
C54400*
B139
Phosphor Bronze
C63000*
B150
Nickel Aluminum Bronze
C64200*
B150
Aluminum Bronze
C65100
B98
Low-Silicon Bronze
C67300*
—
Product Description
Manganese Bronze
*standard stocked alloys
sales@concast.com P.O. Box 816
|
Mars, PA 16046
|
800.626.7071
w w w . c o n c a s t . c o m 800.626.7071
sales@concast.com
w w w . c o n c a s t . c o m P.O. Box 816
|
Mars, PA 16046
All Concast plants are ISO 9001:2008 certified
18
Section 6 — Trade Show Banners
Oil & Gas Industry and Concast
Oil & Gas Alloys from Concast
The demanding applications of the oil & gas industry are supported with alloys manufactured by
Concast Metal Products Co.
Concast Metal Products Co.
manufactures a wide range of copper alloys specifically engineered for oil & gas applications.
Aerospace and Concast Benefits of Continuous Cast: • Uniform structures (eliminates hard spots) • Favorable mechanical properties • Greater friction and wear properties • Excellent machinability and fabrication ability • Reasonable cost
Oil & Gas Applications
Bearings
Bushings
Hydraulic seals
Seals
Torque plugs
Pump parts
Oil & gas industry alloys C63000 | C86300 | C93200 | C95400 C95400HT | C95410 | C95500 | C95500HT
Material Description:
C95520HT | C95800
• Aluminum bronze • Manganese bronze • High tin bronze
• High-leaded tin bronze • Phosphor bronze rods • Nickel-aluminum bronze
All Concast plants are ISO 9001:2008 certified
Standard-stocked alloys
All Concast plants are ISO 9001:2008 certified
C51000 | C63000 | C86300 | C90300 | C90700 C95400 | C95500 Other available alloys C86500 | C90500 | C93700 | C94100 C94300 | C95510
All Concast plants are ISO 9001:2008 certified
19
Section 7 — Trade Show Banners: Updated
C89835 Alloy from Concast
Lead-Free Replacement Alloys
Fire Protection Industry and Concast
Lead-Free Replacement for
C932, C836 and C844
Standard-Stocked Alloy 90 Available Sizes
Concast manufacturers a broad selection of lead-free replacement alloys for pipes, fittings, faucets and other plumbing components. These products have extremely low-lead content, some as low as .05%.
Concast Metal Products Co. manufactures a wide range of alloys exhibiting the qualities of economy and versatility necessary for the construction of dependable fire sprinkler systems.
C89835 is compliant with key legislation including (1) Federal Safe Drinking Water Act 1974 – SDWA, (2) Federal Reduction of Lead in Drinking Water Act 2011 and (3) California AF1953.
Fire Protection Industry Alloys C31400 | C31600 Standard-Stocked Alloys Fire Protection Applications
C89835 | C90300 | C95400 | C95500 | C95900
Sprinkler Components
Other Available Alloys Applications Faucets | Pump Components | Pipe Fittings Plumbing Components | Water Pump Impellers
All Concast plants are ISO 9001:2008 certified
Tubing
C87850 | C89320 | C89325 | C89520 | C89831 | C89833 C89837 | C89844 | C90500 | C90700 | C90800 | C90810 C91000 | C91300
All Concast plants are ISO 9001:2008 certified
20
Joining Systems Pressure Fittings
All Concast plants are ISO 9001:2008 certified
Section 7 — Trade Show Banners: Updated
C46400 Alloy from Concast
C63000 Alloy from Concast
C64200 Alloy from Concast
Standard-Stocked Alloy
Standard-Stocked Alloy
Standard-Stocked Alloy
Low Lead
Satisfies a Broad Range of Applications
C64200, aluminum bronze, is used in the power generation/energy, industrial applications, aerospace and automotive markets.
C46400, naval brass, is widely used in plumbing components where a strong, corrosion-resistant and hard material is required.
Industrial Applications
Industrial Applications
Plumbing Applications Fittings
Marine Applications Decorative Fittings | Hardware | Propeller Shafts Shafting | Turnbuckles
Electrical Applications Precision Shipboard Equipment
Valve Seats | Plunger Tips | Valve Guides | Bearings Aircraft Components | Shafting | Pump Parts Cams | Gears | Valve Balls | Pump Shafts Structural Members | Corrosion-Resistant Articles Hydraulic Bushings for Earth-Moving Equipment Bushings | Heat Exchanger Flanges | Headers Heat Exchangers | Tanks | Welding Piping Systems
Valve Bodies | Valve Stems | Gears | Cams Valve Components | Aircraft Components
Automotive Applications Valve Guides | Automobile Engines
Electrical Applications Pole Line Hardware
Condenser Tube for Power Stations and Desalting Units
Fastener Applications
Marine Applications
Nuts | Bolts
Nuts | Propellers | Pump Parts | Bolts
Marine Applications Hardware
All Concast plants are ISO 9001:2008 certified
All Concast plants are ISO 9001:2008 certified
21
All Concast plants are ISO 9001:2008 certified
Section 7 — Trade Show Banners: Updated
C67300 Alloy from Concast
Wrought Products from Concast Improved Size and Consistency
Standard-Stocked Alloy
Reduces machining losses | Dimensional consistency within each bar Dimensional consistency from bar to bar | Tighter size/section tolerances
C67300, manganese bronze, offers exceptional strength, wear and corrosion resistance.
Increased Mechanical Properties Yield and Tensile strength | Hardness (may reduce the need for hardening)
Improved Machinability and Productivity Allows for higher feeds and speeds and improved machined finish Increased machining rates | Longer tool life | Improved yield
Fastener Applications Fasteners | Lead Screw Nuts
Industrial Applications Bearings | Bushings | Drive Shafts | Gears/Cams Idler Pins | Piston Heads | Propeller Shafts Pump Parts | Seal Rings | Shaft Bushings Sleeve Bearings | Spindles | Thrust Bearings Wear Plates | Clutch Bearings
Marine Applications Hardware | Valve Seats
Other Connecting Rods
Concast Metal Products has been successfully satisfying a broad range of applications and industries with our wrought drawn alloys.
Standard-Stocked Alloys C31400 | C46400 | C51000 | C54400 | C63000 | C64200 Other Available Alloys C31600 | C52100 | C53400 | C65100
All Concast plants are ISO 9001:2008 certified
All Concast plants are ISO 9001:2008 certified
22
Section 8 — Print Advertising: New Concepts Is the performance of your alloys supply chain something you are excited to share with your customers? If not, it is time to consider Concast Metal Products Co. Established in 1891, Concast has earned a reputation for meeting customer requirements for reliability, availability and value across cast and wrought product lines. We provide a wide range of high-quality and standard-stocked options that give our customers what they need … when they need it.
Your alloys supply chain should impress you … and your customers
At Concast, we constantly challenge ourselves to understand our customers’ requirements and quickly respond with solutions to ensure that we remain their supplier of choice.
www.concast.com P.O. Box 816
| Mars, PA 16046
| sales@concast.com
| 800.626.7071
| 724.538.3956 fax
Is the performance of your alloys supply chain something you are excited to share with your customers? If not, it is time to consider Concast Metal Products Co. Established in 1891, Concast has earned a reputation for meeting customer requirements for reliability, availability and value across cast and wrought product lines. We provide a wide range of high-quality and standard-stocked options that give our customers what they need … when they need it.
Your alloys supply chain should impress you … and your customers
At Concast, we constantly challenge ourselves to understand our customers’ requirements and quickly respond with solutions to ensure that we remain their supplier of choice.
www.concast.com P.O. Box 816
23
| Mars, PA 16046
| sales@concast.com
| 800.626.7071
| 724.538.3956 fax
Section 8 — Print Advertising: New Concepts
Improved Size and Consistency Enhanced Surface Finish Increased Mechanical Properties Improved Machinability and Productivity Standard-Stocked Wrought Drawn Alloys
C31400 | C46400 | C51000 | C54400 C63000 | C64200 | C67300
Concast provides reliability, accessibility and profitability in your wrought alloy supply chain.
Our wrought products are cast and cold drawn. Rods are brought to final dimensions by one or more cold drawing operations with suitable intermediate anneals when necessary.
www.concast.com | sales@concast.com
P.O. Box 816
| Mars, PA 16046
| 800.626.7071
| 724.538.3956 fax
Improved Size and Consistency Enhanced Surface Finish Increased Mechanical Properties Improved Machinability and Productivity Standard-Stocked Wrought Drawn Alloys
C31400 | C46400 | C51000 | C54400 C63000 | C64200 | C67300
Concast provides reliability, accessibility and profitability in your wrought alloy supply chain.
Our wrought products are cast and cold drawn. Rods are brought to final dimensions by one or more cold drawing operations with suitable intermediate anneals when necessary.
www.concast.com | sales@concast.com
P.O. Box 816
24
| Mars, PA 16046
| 800.626.7071
| 724.538.3956 fax
Section 8 — Print Advertising: New Concepts Concast Metal Products Co. manufactures a broad selection of lead-free replacement alloys for pipes, fittings, faucets and other plumbing components. These products have extremely low-lead content, some as low as .05%. Standard-Stocked Lead-Free Replacement Alloys
C89835 | C90300 | C95400 | C95500 | C95900
Concast is the industry leader for lead-free replacement alloys.
www.concast.com | sales@concast.com
P.O. Box 816
| Mars, PA 16046
| 800.626.7071
| 724.538.3956 fax
Concast Metal Products Co. manufactures a broad selection of lead-free replacement alloys for pipes, fittings, faucets and other plumbing components. These products have extremely low-lead content, some as low as .05%. Standard-Stocked Lead-Free Replacement Alloys
C89835 | C90300 | C95400 | C95500 | C95900
Concast is the industry leader for lead-free replacement alloys.
www.concast.com | sales@concast.com
P.O. Box 816
25
| Mars, PA 16046
| 800.626.7071
| 724.538.3956 fax