Cv+Portfolio Antonio Cubero

ARCHITECTURAL P O R T F O L I O A n t o n i o C u b e r o A r c h i t e c t P a r t 2 BA (Hons) Arch, M. Arch

A N TO N I O C U B E RO

Architect Part 2 BA (Hons) Arch, M. Arch e// a.cubero@outlook.com t// +44 (0)7548 021453 a// 35 Morgan Court, Battersea High Street, London SW11 3HU

_REFERENCES George Wade Director A: 33 Parkgate Road, London SW11 4NP T: +44 (0)20 7095 0505 M: +44 (0)7814 977504 E: g@all-worldwide.com www.all-worldwide.com

Miguel A. Pontijas Senior Project Manager A: Marie Curie 2, Parque Tecnológico de la Cartuja, Sevilla 41092 T: +(34) 954 46 70 46 E: mpontijas@ayesa.com www.ayesa.com

María Teresa Pérez Cano Professor ETSAS/MARPH Master Thesis Tutor A: Reina Mercedes 2, Sevilla 41012 T: +(34) 954 55 65 01 E: tpcano@us.es www.etsa.us.es

_COVER LETTER Since the end of my University career, I have improved skills in space organization, designing in various scales, and management of complex programs. I have got also good skills in representation, from classical technical boards, to hand-drawing and diagrams and schemes, as well as rendering. Most of all, on the human side, trough my year of experience abroad, I developed an attitude for adaptation to different situations. I like people, and I am very good in team working and pressure-resistance, friendly and in genre in good mood. I am curious about everything I don’t know how to do and willing to spend time and effort at learning, usually capable to do it with good results in a short time. My objective is to find an environment both stimulating on a creative level and on the human one, to grow even more and to test my acquired skills with other people.

_EDUCATION Posgraduated Master in Architecture and Historical Heritage 2014 – 2015

Higher Technical School of Architecture of Seville (ETSAS), Spain.

Andalusian Historical Heritage Institute (IAPH), Spain.

Bachelor’s degree in Architecture + Master’s degree in Architecture and Urbanism.

2008 – 2014

Higher Technical School of Architecture of Seville (ETSAS), Spain.

ERASMUS Exchange Programme.

2012 – 2013

Faculty of Architecture and Fine Arts in the AFM Krakow University, Poland

International Architecture Workshops.

Sept. -2015 April - 2013 June - 2012 April - 2012

Cátedra Blanca CRUZ&ORTIZ Architects, Seville, Spain.

University of Oriente in Santiago de Cuba, Cuba.

Southwest University of Science and Technology (SWUST) in Mianyang, China.

University IUAV of Venice, Italy.

_WORK EXPERIENCE Part 2 - Architectural Assistant (3 months) 2015 aLL Design (Will Alsop) – London, United Kingdom.

As part of a wider team of 14, I worked on two projects: · Masterplan in Manchester (U.K.) called “The Great Northern” reusing and designing new housing, cultural and office buildings. My duties in this project have been designing public spaces for the Civic Square, and preparing 2D and 3D drawings for presentation materials using Adobe Creative Suite. · Masterplan in Brentford, London (U.K.) called “Capital Interchange Way. Blues in the Night” proposing a big basement for a bus station and three towers with mixed uses. My duties in this project have been designing and developing apartment types for residential buildings and working with constructive details.

Part 2 - Architectural Assistant (8 months).

Part 1 - Architectural Assistant (6 months).

2014 - 2015 AYESA Engineering and Architecture – Seville, SPAIN. During my time at AYESA as Part 1 and Part 2 architectural assistant, I was involved in some projects like: · Project and Works of the Office Tower and Tertiary Services Center called “Torre Sevilla” in Sevilla, Spain.

Experience working ’on-site’. Project in collaboration with the international office PELLI CLARKE PELLI Architects . · Project and Works of the Palace of Justice in Córdoba, Spain. Experience working ’on-site’. Project in collaboration with the international office MECANOO Architects. · Design and architectural definition of underpasses, overpasses and viaducts of the Thumamah Corridor, the bridge Iconic Bridge and the landscape and public spaces of the King Abdul Aziz Branch Road in Riyadh, The Kingdom of Saudi Arabia. · Supervision and Control of the Design Project for the first metro line in the city of Bogotá, Colombia.

In the aforementioned projects I participated providing technical assistance work overseeing the monitoring of work, defining modifications to the drafting, editing, review and approval of implementation plans, as well as the definition, review and coordination of the architectural design criteria for large engineering projects.

_SOFTWARE AutoCAD REVIT Rhinoceros ADOBE Suite 3D Studio Max SketchUP VRay Microsof Office *Easily Mastering New Softwares.

_LANGUAGES Spanish English French Polish

_TRAINING COURSES REVIT Advanced Modeling (12 hours).

2015 RendersFactory, Seville (Autodesk Authorized Training Center).

REVIT Essentials (10 hours).

2014 Higher Technical School of Architecture of Seville (ETSAS), Spain.

RHINOCEROS+VRay 3D Modelling+Rendering+Post-Production with PHOTOSHOP (42 hours) 2014 Monzon8, Seville (McNeell Authorized Training Center).

3D STUDIO MAX Rendering and Architectural Vizualisations (30 hours).

2013 AFM Krakow University, Poland (Autocad Authorized Training Center) AUTOCAD Drafting (European ECDL CAD Certificate: PL-CAD003564) (50 hours) 2013 AFM Krakow University, Poland (Autocad Authorized Training Center) 3D STUDIO MAX Modelling+Post-Production with PHOTOSHOP (60 hours)ours).

2011 CADware, Seville.

Native Excellent * Good Basic

*Certificate in Advanced English - CAE 2015,

_EXHIBITIONS + PRESENTATIONS + PUBLISHED WORKS - Speaker in the International Conference on Engineering ICEUBI. 2015 “Permanence, Adaptation or Reuse. Transformations in the Convents of the city of Seville” Conference in the International Congress on Engineering (ICEUBI-2015) in the University of Beira Interior in Covilhã, Portugal.

Official Cambridge Assesment.

_PERSONAL SKILLS Hard working Efficient Resolute Dynamic Analytical

Fast learner Strong design skills Positive leader Entrepreneurial Persevering

- Industrial Heritage AUFI Association Awards.

2014 Exhibition in the Higher Technical School of Architecture of Seville (ETSAS), Spain.

- Fortified Places in the Venetian Lagoon Exhibition .

2013 Exhibitions in the Universities of IUAV di Venezia, ETSA of Seville and ENSA Paris-Malaquais.

Cubero, A. and others: “La dehesa desde dentro. Un modo de gestión en el Valle de los Pedroches” Cuadernos de Transferencia. Arquitectura y Patrimonio Histórico Nº 01. Sevilla, 2015. pp. 117-128.

ISBN: 978-84-606-9487-8.

Cubero, A. and others: “Naturaleza Urbana”.

III Taller de Proyectos y Viaje de Estudios Andalucía - Cuba. Sevilla, 2013. pp. 33-36.

ISBN: 978-84-606-6173-3 Cubero, A. and others: “The inhabited Wall”.

Fortified Places in the Venetian Lagoon. Architettura Design Workshop. Parma, 2012. pp. 208-213.

ISBN 978-88-89739-19-8.

Cubero, A.: “La casa”.

De la ventana a la ciudad: curso 08-09. Sevillla, 2009. pp. 18.

ISBN: 978-84-69204-93-1.

_TIMELINE p) lso . e or y ll A itage t i c y th tre (W Her w sta gb r n n Cen e n i ow l g s . r ako d A i o gal k A s g r a e S n s S a S a c n K e r d l i i e A E ton K C R YE sm in De istor nc tu M en ETS at AY by Tra shing AF ani at A LL FM dr ere , Por irst f e H F b n a g A e n r n h . r i a n t a t t d t o hã e a U 0 li n n n n a y e me /1 dW n W nd del ling ol i y th al C vil ea nt )b sta sta tur Ca ool i IM del ram xb s) 9 ture a Assi ture ion in Co d Mo sista ectur ssi ture cho tec r t y o g a B i S ( A a u h b o h t m c r e l M c c l y s x s P rc e s a ec ura hite no hi ern 2015 vanc al A als dar dio .A Ma mer hit ge Ho t ero tre tur hit nti Arc Int r ree Stu cun Arc hitec d Arc hinoc g Cen ct ( dio Sum sse tec d Arc he EUBI vit Ad ectu ee in han g e . i t e E c u D e S j e t h x t 3 e r i n E ro rc s d 3D S glish S.A. and ool. r in IC n Re rchit Arc g an e in R rainin egr ep deg in Rev t 2 A ing a US e in or´ i ake ring A En ., U. mary li Sch in rs n8 T gre er´s d art 1 eerin urs rsity ASM ity r eer r´s hel u e e o c e Spe ginee ourse rt 2 a o s d t C a s r rse P R t P o e s l n C n r s z i u u B E D.C Pri rtace i v a a a e i C a n o o n g g P iv M E C C M Fin Un En En Mo Po Un

2016

2015

2014

CÁTEDRA BLANCA WORKSHOP in Seville, Spain

London, U.K.

Seville, Spain

2013

2012 2011

2008

WORKSHOP in Santiago WORKSHOP in WORKSHOP in de Cuba, Cuba. Mianyang, China Venice, Italy

Krakow, Poland

Seville, Spain

1990

R E S U M E

O F

C O N T E N T S

_INDEX OF PROJECTS I have decided to select some projects of my professional experience and of my academic background that reflect the different scales of action in which I conceive architecture (S, M, L, XL and XXL). The scale is a basic component and determinant in the outcome of any project, its correct interpretation and adaptation are the basis for a successful performance.

This graphic shows the different areas of expertise in which I have worked as well as the international perspective of travelling around the world exploring and developing my own vision as an architect. The following exposition, summarizes each of the scales I have faced under a common thread reflecting the foundation on which my architecture is based.

#Masterplan L. The Great Northern in Manchester, UK (aLL Design) L. Torre Seville, Spain (AYESA) XL. Space Reconstruction, Mianyang, China XXL. Urban Nature, Santiago de Cuba, Cuba

#Housing S. Historical Re-Definition, Seville, Spain L. The Great Northern in Manchester, UK (aLL Design) XL. Space Reconstruction, Mianyang, China XXL. Urban Nature, Santiago de Cuba, Cuba

#Restoration M. The Inhabited Wall, Venice, Italy L. The Great Northern in Manchester, UK (aLL Design)

#Cultural S. Historical Re-Definition, Seville, Spain M. The Inhabited Wall, Venice, Italy XL. Waterfront Guadalquivir, Seville, Spain

#Offices M. Palace of Justice in Cordoba, Spain (AYESA) L. Torre Seville, Spain (AYESA) L. Cubic Offices, Krakow, Poland

#Landscape M. The Inhabited Wall, Venice, Italy XL. Waterfront Guadalquivir, Seville, Spain XL. Space Reconstruction, Mianyang, China XXL. Urban Nature, Santiago de Cuba, Cuba

THE GREAT NORTHERN Project by aLL Design (Will Alsop) Year Location Stages

L (45000 m2)

2014-2015 (on design) Manchester (United Kingdom) Concept and Developed Design

In this Masterplan project located in the city of Manchester, there are refurbishment of existing pieces and new designing of Housing, Office, Cultural and Educational Buildings.

I have been able to learn the role of the architect at all stager, including winning Jobs, preparing planning applications and submitting to local authority, working with consultans and preparing detailed information for tender and construction.

Also managing a project, drawing 2D plans and 3D models with Building Information System as Revit software.

Rendering and Post-Production

Ground Floor of the Masterplan. Revit Drawing and Post produced with Adobe Suite

My duties in this project were: - Designing public spaces and furniture for the Civic Square - Preparing 2D and 3D drawings for presentation materials using adobe creative suite

L

TORRE SEVILLE Project by AYESA+PelliClarkePelli Architects Year Location Stages

(40000 m2)

2009-2015 (built) Seville (Spain) Developed and Technical Design Construction and Handover and Close Out.

I collaborated in the construction of this office and commercial project, including the first skyscraper in Seville, working ’onsite’ from May 2014 to April 2015. For this year my duties were:

Panoramic View of the Building Construction

- Support to the definition of Project Modifications. Projective definition of new spaces, distributions and elements in detail and definition of new finishes and technical aspects.

Coordination with PKP office contacting them for the changes in the original design.

- Editing, Revision and approval of plans. Plans relating to the area of architecture: Masonry, Dimension Drawings and Finishes, Carpentry, Construction Details, Fire protection, Facades, Structures, Urbanization, Landscape and Public spaces.

- Assistance in the Supervision of Works. Visit to continued work for conducting performance monitoring reports, technical inspections and coordination between them.

- Technical office of Project Management. Encompasses all tasks performed on site. Managing all the documentation generated and delivered to the Construction Management (Dragados) and for the client (Puerto Triana S.A.)

Access Floor (Level +4.30m

Terrace Floor (Level +167.50m)

- Collaboration in the drafting of the Final Works Official Documentation. First Occupation License, Final Certificate of Works, Projects Modifications, As-Built drawings.

General First Floor (Level +13.50m)

General Basement Floor (Level -0.20m)

M

PALACE OF JUSTICE, Cordoba.

Project by AYESA+MECANOO Architects Year Location Stages

Panoramic View of the Building Construction

(8500 m2)

2014-2015 (on work) Cordoba (Spain) Technical Design and Constuction

I had the opportunity of collaborating in this Courthouse project in its first year of work. During this year, my duties were: - Support to the definition of Project Modifications and new scopes with 2D-3D drafting and models.

- Editing, Revision and approval of built plans.

- Assistance in the Supervision of Works visiting the site.

West Elevation

1st Floor

HISTORICAL RE-DEFINITION Housing+Community Centre (1st CLASS)

Year Location Subject

S (4000 m2)

2014 Seville (Spain) B.Arch. Diploma project

For my final degree project, I designed an urban redefinition of an historical and complex area of the centre of Seville, which combines local history and contemporary life, graduating with honours, as the first of the class.

The idea is to generate a spatial structure for a plot, and trying to connect with the other plot, being designed as the antithesis of the other one, in a conceptual way. This project has a duality of programs and features for the two spaces: public-private, closed-opened space, housing-community centre, connecting both buildings.

In this regard, one of the most interesting points of the project is how the physical separation between the perimeter void is generated within the equipment and the Vascongadas street is resolved. The practice of making a glass box recessed operation makes the alley street Vascongadas earn dimension perceived street, the wall and slides generated as a whole public.

For this project, I develop and calculated all the structures, installations, facilites and construction details with engineering softwares.

GROUND FLOOR

2

1

2'

1'

EAST ELEVATION

CROSS SECTION

DETAIL A

DETAIL B

DETAIL C

B

A

C

CONSTRUCTIVE CROSS SECTION C

M

THE INHABITED WALL Reuse of the Island of San Giacomo in Paludo

Year Location Subject

(12500 m2)

2012 San Giacomo in Paludo, Venice (Italy) Workshop FORTIFIED PLACES

The project is located on the small island of San Giacomo in Paludo, in a strategic position north of the Lagoon of Venice (Italy). The idea came as a heterotopia, creating a new tourism model, where the visitor becomes the actor of his own journey, with capacity to engage in that are integrated into the heritage object of contemplation industrial-craft activities.

The intervention on the island is to rehabilitate the abandoned ships inside while a double skin is generated by treating the boundary wall of the island as a equipped habitable wall that generates a perimeter tour of the island with specific interactions artisan craft workshops. The goal at all times is that the island retains its essence, respecting all its architectural and natural elements, but enhancing its value.

One of the natural pieces is preserved as a garden of contemplation, and the two refurbished pieces have been restored following their historical apperances.

This project was supervised by Proffesors Mauro Marzo, Antonio Tejedor y Maria Salerno.

HISTORICAL PICTURES OF THE ISLAND OF SAN GIACOMO IN PALUDO

EXISTING FLOOR 0

IDEOGRAMS

5

10

20

40m

CROSS SECTIONS

NEW GROUND FLOOR 0

5

10

20

40m

REFURBISHMENT OF THE EXISTING BUILDINGS CONSTRUCTION STAGES

CONSTRUCTIVE DETAILS

AXONOMETRY OF THE PROPOSAL

L

CUBIC OFFICES Urban and Office Design (Distinction).

Year Location Subject

(22000 m2)

2012 Krakow (Poland) M. Arch. and Design project

This proyect starts from the orthogonality generated in the area where it is located, The Krakow Airport Zone.

Volumes through rectangular shapes are designed to occupy the plot and create a new rhythm in the environment to accomodate a new offices space.

These offices will be connected together trough a high pedestrian gateway that is based on the airport. Then, one building will be developed in detail to define its coming to constructive aspects. Using the colour is very important in the proyect, as shaped all elevations be very colourful.

This project was supervised by Prof. Krzysztof Ingarden of INGARDEN & EWY ARCHITEKCI.

URBAN DESIGN

CROSS SECTION

GROUND FLOOR

4th FLOOR

1st FLOOR

ROOF FLOOR

OPTION 1 (4 Offices) 300 m2

450 m2

OPTION 3 (5 Offices) 300 m2

300 m2

300 m2

450 m2

150 m2

450 m2

2nd FLOOR 450 m2

450 m2

OPTION 2 (4 Offices) 450 m2

150 m2

450 m2

OPTION 4 (7 Offices) 450 m2

450 m2

150 m2

150 m2

150 m2

300 m2

150 m2

3rd FLOOR

DENSITY-ORIENTATION

SOUTH ELEVATION

WEST/EAST ELEVATION

NORTH ELEVATION

11

LEGEND 1. Flooring tiles polished 40x40 cm on covers for floating floor.

2. Cover Sheet waterproofing 3. Lightweight concrete grade training 4. Pvc insulation 5. Surface lighting. ceiling lighting recessed lighting with sound 6. Concrete forged 7. Acoustic ceiling 8. Type ceiling pladur 9. Air supply for corridor 10. Air supply office.

11. Folded sheet metal through galvanized steel. e = 5mm 12. Metal panel siding 13. 4 Plates consist of plaster and thermal insulation 14. Galvanized steel perimeter profile 15. Profile and securing anchor metal strip 16. Bearing beam profile IPE 300 using laminated finish rolled steel 17. Finishing beam profile IPE 300 using laminated finish rolled steel 18. Projection of column HEB 300 19. Type double glazing glass 20. Aluminium joinery 21. Metal blade folding of colour 22. Air supply 23. Independent unit heating and cooling 24. Power supply plugs 25. Technical floor 26. Electric cables for driving 27. Drivers driving under the floor high coolant 28. Drivers driving high floor heating lowANT 28. DRIVERS DRIVING HIGH FLOOR HEATING LOW

FLOOR CONSTRUCTIVE DETAIL

1

2

3

4

5

6

7

8

9

10

12 13

14 15 16 17

18 19

20

21

22 23

CONSTRUCTIVE DETAILED SECTION

WATERFRONT GUADALQUIVIR Landscape and Cultural Facilities

Year Location Subject

XL (120000 m2)

2015 Seville (Spain) C谩tedra Blanca Workshop

The project starts from the analysis of the edge of the river Guadalquivir on its way through the historic center of the city of Seville. The intersections of the bridges with the right bank have generated complex urban situations and should be studied as a whole.

From the North to the South, there is a rhythm of public spaces connecting the city with the River, however, in its middle point and place of the location of the project, where this connection is completely broken due to the introduction of the bus station and a few parking lots.

The idea of the project is to connect the North and the South through a large urban green area, allowing citizens to walk around the edge of the River through public spaces. In addition, as a gateway to the city, a building is generated from the geometry of the Park to host cultural uses.

This project was supervised by Antonio Cruz Villal贸n of the architectural office CRUZ&ORTIZ Architects.

BRICK

PATH

CONCRETE ASPHALT GREEN

WATER

FUNCTIONAL CONCEPT IN THE MIDDLE POINT (PROJECT)

BUILDINGS

ROAD

PEDESTRIAN PATH

GREEN AREAS

RIVERSIDE WALK

URBAN DESIGN OF THE WATERFRONT

FUNCTIONAL CONCEPT OF THE REST OF THE BORDER

The sections below show how the topography of the original riverside is not modiďŹ ed. The design has tried to increase the volume of green areas adding a lot of new trees and shrubs of different species.

These species have been selected from other local parks giving a new perspective of the Guadalquivir waterfront.

SKETCHES OF PUBLIC SPACES

SPACE RE-CONSTRUCTION Masterplan. Housing+Public Facilities

Year Location Subject

XL (215000 m2)

2012 Mianyang (China) Workshop NEW SETTLEMENT SCULTURAL L ANDSCAPE

The project idea is to keep the original topography of the site to contain a strong natural character and landscape.

To this end, a central axis of public spaces arises as a pedestrian platforms where born nuclei cross roads to housing.

These properties are presented as living quarters for rural people who work the land, so that a network of canals to irrigate land gravity is designed to give options to the domestic crop. The project is dipped in the nature of the place keeping the big green spots and building as possible. The section reflects the project as the uses are stratified with respect to topography.

This project was supervised by Prof. Ram贸n Pico y Studio of Professor Nie.

URBAN NATURE Masterplan. Housing+Public Facilities

Year Location Subject

XXL (450000 m2)

2013 Santiago de Cuba (Cuba) Workshop NEW DEAL HOUSES AFTER HURRIC ANE SANDY

The project starts from a formal relationship between the design of the historic center of Santiago de Cuba and our environment trying to convey the idea of applying it to the rural community.

After the disaster of Hurricane Sandy, housing needs were notorious, so raise certain density was required. To do this, an infrastructure network and connections between all intervention is generated to encourage social contact between Cuban citizens. The approach of adapting itself to the topography housing helps to understand that Cuban philosophy of engaging nature to live in harmony.

CONCEPTUAL SKETCHES

URBAN AND CONSTRUCTION DESIGN PROCESS

HOUSING TYPES