Anzor Architectural Catalogue by Anzor Fasteners Ltd

Glass Clamps P. 61

Tension Rod Systems P. 77

Wire Balustrading P. 29

Glass Spiders P. 119

Glass Canopy System P. 111

Wire Rigging Systems P. 93 Foliage Systems P. 127

Visit our online catalogue and gallery at

Webnet - P. 55

www.anzor.co.nz/arch

INDEX

About anzor architectural

why deal with anzor architecturaL?

GUIDE To Stainless steel Specifier’s Guide to Stainless Steel

Guide to Cleaning & Maintenance of Stainless Steel

Stainless Steel - The Green Choice & The Economical Choice

WIRE BALUSTRADING Overview of Anzor’s Wire Balustrading Infill Systems

Anzor Eyelet for Vertical Wire (`V’ shaped) Balustrading in Metal Frame

Anzor Eyelet for Vertical Wire (`V’ shaped) Balustrading in Timber Frame

Conditions of Trade - please visit www.anzor.co.nz/conditionsoftrade Please also see Anzor’s disclaimers on p. 9. Front cover photographs courtesy of: Strudyna Co.Ltd - Spider Glass Facade & P2H Tension Rod (left & middle); Bay Trenz Ltd, Mt Maunganui - Stand-Off Csk Glass Clamps (bottom right); and Metalworks Wanaka Ltd - Anzor Balustrading Eyelet for Metal (top right).

Online catalogue: www.anzor.co.nz/arch

INDEX

Anera Lock - Vertical Wire (straight) Balustrading

Slimfix - Horizontal Wire Balustrading

Wire Rope Characteristics and Breaking Loads

See pages 104-108 for Wire & Cable options.

Wire Termination Options

webnet Webnet Mesh Range - Stainless Wire Netting

Online catalogue: www.anzor.co.nz/arch

INDEX

GLASS clamps for balustrading Overview of Anzorâ&#x20AC;&#x2122;s Glass Clamps for Balustrading

Anzor 22 - D Shaped

Anzor 23 - Square Shaped

Technical details for installation

Anzor Stand-Off - Top Hat

Anzor Stand-Off with Csk Screw

Technical details for installation

HANDRAIL FITTINGS Handrail Tube Connectors

NB: these are samples of the range. ROD BRACING

Handrail Support Fittings

NB: these are samples of the range.

Online catalogue: www.anzor.co.nz/arch

INDEX

TENSION rod SYSTEMS

Overview of Anzor’s Tension Rod Systems

Rod Dynamic `Hidden Thread’ Fork/Eye + Rod - Stainless Steel

Coupling Plates for Fixing to Walls - Stainless Steel

Coupling Plates for Cross Bracing - Stainless Steel

P2H Adjuster + Rod - Stainless Steel

SRS-560 High Tensile Adjuster + High Tensile Rod - Stainless Steel

Tension Rod System - Galvanized

INDEX

WirE RIGGING Systems Overview of Anzorâ&#x20AC;&#x2122;s Wire Rigging Systems

S3121/5 Toggle/Swage Turnbuckle

S3121P Jaw/Swage Turnbuckle

S7805 Toggle Swage Terminal & S7803 Fork Swage Terminal

Swage Stud At Each End - Basic Wire Tensioning System

S7803 Fork + Swage Stud - Basic Wire Tensioning System

RDS Fork + PBI Stud

100

P2H Adjuster - Architecturally Designed Wire Tensioner

101

Wire Rope & High Tensile Cable in 316 SS

104

Online catalogue: www.anzor.co.nz/arch

INDEX

GLASS canopy system Canopy System Overview

111

Canopy System Assembly

112

Rod Installation & Components

114

SPIDERS FOR glass facadeS

Structural Dynamic `Spyder’ Glass Facade Systems

119

4 Leg YB41 Spider

120

2 Leg YB21 Straight Spider

121

2 Leg YB21 45° Spider

121

2 Leg YA24 Spider for Glass Fins

122

1 Leg YA14 Spider for Glass Fins

123

Rotule and Rotule Tools

124

Online catalogue: www.anzor.co.nz/arch

INDEX

Foliage systemS Foliage System Overview

127

Foliage System Components

128

Solid Wall & Timber Applications

129

Installation

131

Alternative Foliage Options

132

Fasteners and fittings Anzorâ&#x20AC;&#x2122;s Range of Stainless Steel Fasteners & Fittings

137

Boslok - Stainless Steel Down Pipe Wall Clamp

139

Stainless Fastenings for Timber

140

Stainless Fastenings for Concrete

141

Conditions of Trade - please visit www.anzor.co.nz/conditionsoftrade Disclaimers: while the information (including product pictures) in this catalogue endeavours to be accurate, specific details/features may vary from that which is represented. If your specifications are critical, please ask for clarification. Anzor will not be liable in the case where loss arises as a result of goods and/or information being different from that which to the extent permitted by law is represented in the Anzor catalogue and other information. NB: some of the photos depicting product in use, shown in this catalogue, may not meet the relevant regulations. Do not rely on what is shown in these photos, but refer to the design specifications and/or consult with external parties to ensure that your design meets the current legal requirements. Anzor will not be liable in the case where loss arises as a result of using whatâ&#x20AC;&#x2122;s shown in these photos as a basis for any part of your design. From time-to-time the information and/or Producer Statements in this catalogue may be updated, so we recommend that you ask us for confirmation on specific details in your design stage.

Online catalogue: www.anzor.co.nz/arch

Anzor Architectural for Stainless Steel Architectural Hardware We carry an extensive range of quality stainless steel hardware and fittings for a wide range of architectural applications.

Anzor Architectural is a division of Anzor Fasteners Ltd. Anzor Fasteners is New Zealandâ&#x20AC;&#x2122;s leading supplier of stainless steel fasteners and fittings, with the largest and widest range of stock in New Zealand.

Anzor has been operating since 1993. For the last 10 years it has been supplying architectural products. With the ongoing expansion of its range, it has established a specialised division for architectural products called `Anzor Architecturalâ&#x20AC;&#x2122;.

13 Anzor Albany Branch

WHY DEAL WITH ANZOR?

why deal with anzor architectural? Quality products - we have carefully selected reputable, high-quality, proven manufacturers. In many cases products have been designed for the New Zealand environment to meet NZ building regulations.

Producer Statements - our vertical wire balustrading systems, glass canopy system, and glass clamps have been tested in an Auckland laboratory, with Producer Statements provided by P+P Consulting Engineers Ltd, showing their conformance to the New Zealand building code.

Quality tested stainless steel - in addition to only dealing with reputable factories, our inwards goods are subject to a statistical material testing programme using an X-Ray Spectrometer to verify the stainless steel composition. This reduces the risk to you of specifying or using lowspec product that may rust or fail.

Personalised service - through one of our 7 local branches across New Zealand, or our two Architectural Product Managers, we can provide the relevant information that you need to specify and use our products.

Quick supply - as most of the Anzor Architectural products are stocked in New Zealand, we can dispatch most items immediately and overnight. Availability of products is denoted in this catalogue.

15 National Distribution Centre - Albany

HOW TO CONTACT US

how to contact us? Architectural Product Managers Berwyn Jones

Paul Rasmussen

P M F E

09 273 2121 027 229 0980 09 273 4044 berwyn@anzor.co.nz

Cnr Cryers Rd & Trugood Dr East Tamaki, Auckland

04 499 7117 027 240 2780 04 477 6537 paul@anzor.co.nz

Palmerston North

Branches

AVONDALE

TI R AKAU DRIV E OO D

STREET

R PA

ER NT SO

AD RO

ROAD

TE IR IRAN GI D RIVE

TA KO DA

CU RL ET TS AD RO

Wigram Aerodrome

AD RO

R IG W

S NN

AD RO

RO AD

AD RO

N GTO KIN PIL

SE OU KH

ON YT HA

HARRI

MCALPINE ST

STONEDON

ROAD

BLENHEIM

Sockburn

HAYTON

FE EF TR

CRY ER

WELLINGTON HARBOUR

CENTRAL WELLINGTON

NE AN

N AI M

SMALES

AD RO

AHI ROAD NG A M

S RY KE

D OA RD R

SANDWICH

Glover Court

CHRISTCHURCH CENTRAL

AD RO H UT SO

AD RO

PERCLO PL

RK DR

VIC

McDONALDS

KE RY ST

browse our range online at:

www.anzor.co.nz

ELL PL

PA RA

AN CH ES TE

NEWWORLD

AX M

Te Rapa

RT HPA

A AV

N LO

E ER

76 Hayton Rd Sockburn Christchurch Ph 03 384 1110 Fax 03 384 9977 Email chchsales@anzor.co.nz

C VI

NS RO AIR W

THE BASE

S NEALES ROAD

LE AL

TO STATE HIGHWAY 1/ NORTHERN/ SOUTHERN MOTORWAY

D CR Y ERS ROA

AY W OR OT M

HIGHBR OOK DR

TYE S RD R

Christchurch

TR U G

TO PAKURANGA AND THE SOUTH EASTERN MOTORWAY

KE TE RD

East Tamaki – Akld

9A Glover Court 4 Glover St Ngauranga Gorge Wellington Ph 04 499 7117 Fax 04 477 6537 Email wgtnsales@anzor.co.nz

HU T

AUCKLAND

Ngauranga Gorge

RW AY

N I

VE RN AL

ROAD

GLOVER ST

PA TIK

TOTARA

TE N

-W

N CE

Wellington

KUMEU RT H

HEWLETTS TAURANGA

KO DA

AL E

T SE S UN

AUCKLAND

T EE

LLATIO

AD RO

DRIV

ROAD

R ST

LL O

6 Newton St Mt Maunganui Ph 07 572 5222 Fax 07 572 5223 Email mmsales@anzor.co.nz

N TO

D OA

MT MAUNGANUI

HULL

W NE

BU SH

EAST R

9 Patiki Road Avondale Ph 09 828 9070 Fax 09 828 9071 Email westsales@anzor.co.nz

RD NDA

ON ILT Y CIT

AY HW RT NO

M HA

709 Te Rapa Road Hamilton Ph 07 847 4710 Fax 07 847 4711 Email hamilton@anzor.co.nz

IVE DR

West Auckland

Hamilton

AY R D

OXIDATION PONDS

CONSTE

Cnr Cryers Rd & Trugood Dr East Tamaki Ph 09 273 2121 Fax 09 273 4044 Email etsales@anzor.co.nz

Mount Maunganui CO AS T

ITO W TR A REN

ROAD

R AY RW MOTO

EDALE ROS

D BUSH ROA

8 Arrenway Dr Albany North Shore Ph 09 476 0001 Fax 09 476 0090 Email sales@anzor.co.nz

E ILL EV GR D R

UI AN NG AU M

AL BA NY EX PRE NORTH SSW AY

ERN RTH NO A TAW R D

Albany – Akld

Online catalogue: www.anzor.co.nz/arch

guide to stainless steel

DIVIDER INSERT HERE:

guide to stainless steel

GUIDE TO STAINLESS STEEL

SPECIFIER’s GUIDE TO STAINLESS STEEL BENEFITS OF STAINLESS STEEL •

Durable - required by the Building Code (for 50 years durability).

•

Delivers good value-for-money as it outlasts zinc/galvanizing – overall a lower cost through the entire life cycle.

•

Attractive appearance – its look can be maintained.

•

100% recyclable and non-toxic. Chrysler Building (1929)

- dome is stainless steel (courtesy of the Nickel Institute).

ABOUT STAINLESS STEEL AND THE COMMON GRADES (304 & 316) The majority of Anzor’s products are mostly offered in both 316 `Marine Grade’ Stainless, applicable to coastal environments, and also 304 generally for interior applications or in low corrosive environments. •

Stainless Steel has a naturally occurring protective film on its surface of `Chromium Oxide’. Nickel (in both 304 & 316) and Molydenum (in 316) improves the corrosion resistance of stainless steel.

•

316 is more corrosion resistant than 304.

•

304 is generally what the building code requires (except in some Geothermal zones). The general rule-of-thumb is: use 316 if in a corrosive environment (e.g. salt in the air) and the stainless steel product is ‘on show’. NB: most NZ cities have a high salt content in the atmosphere.

BEWARE OF LOW NICKEL STAINLESS STEEL •

We are aware of low-nickel stainless fasteners on the market. They are ‘below spec’ for 304 & 316 and more susceptible to rusting.

•

Anzor only deals with high quality, reputable suppliers. We also have a material testing programme using an X-Ray Spectrometer to provide quality assurance.

THE ENVIRONMENT •

This can have a significant impact on stainless steel’s performance.

•

If you are in the sea-spray zone or subject to salt-blow, and the stainless steel product is ‘on-show’, we would suggest 316 grade.

•

Exposure to rainwater is helpful – this should wash the salt and pollutants off the stainless steel.

View online or download a PDF at: www.anzor.co.nz/specifers-guide Online catalogue: www.anzor.co.nz/arch

GUIDE TO STAINLESS STEEL

SPECIFIER’s GUIDE TO STAINLESS STEEL THE FINISH The smoother or more polished the finish, the better the corrosion resistance. Some stainless products have a brushed, satin or ‘rougher’ finish – e.g. sometimes on hinges, fittings, downpipes. This can risk ‘tea-staining’, giving a rusty appearance. Electro-polishing or passivating (forms of acid treatment) improve corrosion resistance.

GALVANIC CORROSION This is where two dissimilar metals are in contact, react and cause corrosion. For example, Lead flashings on a Zincalume roof. Galvanic corrosion is a risk with stainless steel and/or other metals. We recommend investigating situations where you have concerns related to possible Galvanic corrosion.

AVOID CONTAMINATION FROM TOOLS This is where your tools pass on minute contaminants (e.g. iron filings). These rust on the surface of the stainless steel and kick-start corrosion. How do you reduce the risk of this? •

Drive/Screw Tips should be Chrome Vanadium steel (Anzor stocks).

•

Allen Keys should be Hardened-Chrome plated (Anzor stocks).

•

Cutting Wheels should be made from Aluminium Oxide, be ‘Iron’ or ‘Carbon’ ‘free’, or be labelled “For Stainless Steel”.

•

Hammers should be good quality Hardened-Steel or Hardened-Chrome plated.

•

NB: these tools should be kept just for stainless steel.

LUBRICATING THREADS Anzor, along with leading stainless fastener engineers, recommends that all stainless steel threads should be lubricated before being assembled, to reduce the risk of galling (this is when threads lock up and `cold weld’). We have found the greatest risk of galling occurs with larger thread diameters, and also when using Nyloc Nuts. We suggest ‘Prolan’ or ‘Nickel Anti-Seize’ lubricants (Anzor stocks).

Anzor’s Range of Nickel Anti-Seize Products Available at your local Anzor Branch.

View online or download a PDF at: www.anzor.co.nz/specifers-guide

CLEANING & MAINTENANCE GUIDE

Guide to CLEANING & MAINTENANCE OF STAINLESS INTRODUCTION For the preservation of stainless steel Anzor strongly recommends regular maintenance. The following provides a guide to preserving stainless. Please be aware of this yourself and also pass it on to your clients. If you have any questions or would like further information, please contact your local branch.

EXTERIOR Like all surfaces, stainless steel requires cleaning to remove dirt and grime to keep it in pristine condition. The level of cleaning and maintenance required depends primarily on the environment. In some exterior instances normal rain washing is sufficient, e.g. roofing, but more polluted or corrosive environments, e.g. coastal situations, the surfaces require regular washing to retain their good looks. The type of finish will also influence the cleaning required, and it is recommended that the rougher the surface the more regularly cleaning is required. For example, Stainless Steel Wire has a rough surface with crevices that harbour corrosive agents which cause discolouration relatively quickly. Regular cleaning is required to remove this. A corrosion inhibitor such as “Prolan” liquid or aerosol applied with a soft cloth will aid in corrosion prevention (stocked by Anzor). Coastal situations – discolouration or tea staining most commonly occurs within 5 kilometres of the coast and becomes progressively worse closer to the water. Note that in situations right on the seafront, it is recommended that cleaning is performed once a month.

Benefits of Prolan

Prolan’s Range of Corrosion Inhibitor Products Available at your local Anzor Branch.

•

Non-toxic and non-carcinogenic.

•

Inhibits oxidation and galvanic corrosion.

•

Forms a barrier on treated surfaces, preventing corrosive agents from penetrating the surface.

•

Safe to use on rubber and other synthetic materials and will not cause perishing.

•

Prevents moisture and oxygen from contacting metal surfaces, preventing corrosion.

•

All blends of Prolan products are very easy and safe to apply.

View online or download a PDF at: www.anzor.co.nz/maintenance Online catalogue: www.anzor.co.nz/arch

CLEANING & MAINTENANCE GUIDE

INTERIOR Dirt and grease accumulate from many sources. They can usually be removed by routine cleaning using soap, ammonia or detergent and fresh warm water. It should be noted that nearly all abrasive cleaners will scratch bright polished stainless steel surfaces. On other finishes the cleaners should only be used in the direction of the polish. A clean, dust and grit free cloth should be used to avoid scratching.In all cases the mildest cleaning procedure that will do the job efficiently should be used, e.g. wash down with warm fresh water and washing up liquid followed by a wash of clean warm water only followed by wiping dry with a clean absorbent cloth. For textured and rigidized finishes a nylon bristled brush will remove any dirt and grime which may accumulate in the valleys of the textured finish. If “Tea Staining” or rust is present, stainless steel can be cleaned with Grunt Emergel (stocked by Anzor). After initial installation, the stainless steel will require thorough cleaning to remove any adhesive – either from the protective coating or other building operations – that may have been left on the surface. If marks such as fingerprints etc are a continuous problem a light surface coating of baby oil, clear silicone wax polish or furniture polish such as Neopol will help prevent recurrence of this problem. Care should be taken on choosing such a product to be used on the surface of stainless steel if clothing is likely to come into contact with the surface.

PRECAUTIONS Harsh abrasives should never be used on any polished metal surface. Strong mineral acids such as hydrochloric and sometimes hydrofluoric acid are used to clean masonry, but these should never be permitted to come in contact with stainless steel or any other metal work. If this should happen, the acid solution should be washed off immediately with plenty of water. Pads of ordinary steel wool incorporating soap should be avoided – there is a danger that particles of plain carbon steel from the pads may be left behind after rinsing to give unsightly rust stains. Never use oil based commercial cleaners on the outside of a building. The residual oil film can result in unwanted iridescent colours on stainless steel which can only be removed by abrasive action. Most stainless steel installed at a construction site has a PVC protection film on it. This should remain on the steel until the last possible moment to protect the surface of the stainless steel from such problems as chemical and concrete splatters.

View online orcatalogue: download awww.anzor.co.nz/arch PDF at: www.anzor.co.nz/maintenance Online

CLEANING & MAINTENANCE GUIDE

GUIDELINES FOR FABRICATORS/INSTALLERS Recommend to your clients to wash the surface regularly – see below Weld Treatment – pickling treatments after welding are a must for good performance of stainless steel. This chemical treatment removes the welding oxide and rapidly restores the passive layer, which gives stainless steel its corrosion resistance.

Cutting Stainless Steel – an aluminum oxide cutting wheel/blade should be used. Design, Fabrication and Handling – poor design and fabrication can lead to tea staining or more serious corrosion. For example, good designers will avoid crevices, such as intermittent welds and areas where water can collect. Competent stainless steel fabricators will avoid carbon contamination. Choose designers and fabricators experienced with stainless steel.

Installation and Inspection – after installation the completed structure should be inspected for surface imperfections or contaminants. If discovered, imperfections should be removed and the corrosion resistance chemically restored by pickling or passivating treatments or by electropolishing. Hydrchloric acid which is sometimes used to clean cement or mortar residues should not be used on stainless steel.

Appropriate grade selection – grade 316 should be selected within 5 km of the coast. Specify and insist on a smooth surface finish – to minimise the risk of discolouration, the smoother the surface finish the better. A surface roughness (Ra) of less than 0.5 micrometres is strongly recommended. A No.4 finish is not adequate. Typically, refinishing operations using 320 abrasives would achieve a finish better than 0.5 micrometres Ra. Components used near the sea can be made more resistant to tea staining by pickling to remove surface contaminants, electropolishing is even more effective. However, it must be noted that both processes can change the surface appearance – pickling tends to dull polished surfaces while electroplating will brighten surfaces. 316 stainless steel electro-polished is the ideal finish for coastal environments.

Chemically treat the welds – the best resistance to tea staining is achieved with a finish polished to 320 grit or finer, but linished or pickled finishes (only) may be adequate for less critical applications. Where a linished finish is desired, 320 grit (or finer) silicon carbide abrasives should be used with lubrication if possible. In these circumstances a passivation treatment (nitric acid only) should be applied to the ground/polished area. In selecting abrasives consideration should be given to matching the surrounding finish. Where linishing is not performed, pickling of site welds (using mixed acids – hydrofluoric plus nitric) should take place as a final step in the weld procedures. This treatment will remove any fabrication contaminants and restore the passive chromium oxide layer, resulting in a corrosion resistant surface. Pickling treatments may alter bright surface finishes. (Source of section (2): Australian Stainless Steel Development Association Technical Bulletin, No 2 July 2001)

View online or download a PDF at: www.anzor.co.nz/maintenance Online catalogue: www.anzor.co.nz/arch

CLEANING & MAINTENANCE GUIDE

MAINTAINING & CLEANING WIRE ROPE Stainless steel wire can be prone to corrosion and tea staining. This is partly due to the long crevices which run up it. These tend to trap salt and other contaminants, and also can remain wet for longer.This damages the of chromium oxide layer of the stainless steel, causing rust or ‘tea staining’. To maintain the wire’s looks, it must be cleaned regularly (see table for a guide). The wires should be cleaned with a soft cloth using soap or mild detergent and warn water, followed by rinsing with cold water and wiping the surface dry. Do not use hydrochloric acids as these will stain the surface and may start serious corrosion. To remove stains try Grunt Emer Gel (Anzor stocks).

Emer Gel

CLEANING FREQUENCY This will depend very much on the local environment of the building but experience indicates that the following frequency of cleaning is sufficient to maintain the good looks of stainless sheet. Environment

TYPE 304

TYPE 316

Seafront

Grade not Recommended

Monthly

Coastal (within 5km of the coast)

Grade not Recommended

6-12 months (Wire: monthly)

Industrial and Urban

3-6 months

6-12 months (Wire: 2-12 per yr)

Suburban Rural Internal

Annually or as required by experience As required to maintain appearance

NOTE: When using chemicals, cleaners etc recommended in this document the manufacturer’s instructions must be strictly adhered to.

Internal “V” Shaped Wire Balustrade.

View Online online or downloadwww.anzor.co.nz/arch a PDF at: www.anzor.co.nz/maintenance catalogue:

CLEANING & MAINTENANCE GUIDE

CLEANING METHODS Requirement

Method

Routine cleaning (this is important Soap, ammonia or detergent and in Coastal areas) warm water. 3M Citrus in an aerosol can is an effective cleaner. Sponge with cloth or soft brush then rinse with clean water and dry. Fingerprints

Detergent and warm water or organic solvent.

Comments Satisfactory on all surfaces. Situations directly on the seafront require cleaning once a month. Uneven surfaces or surfaces with crevices are prone to trapping corrosive agents. Satisfactory on all surfaces. To minimise recurrence use an aerosol oil cleaner.

Organic solvent, e.g. acetone, enklene.

Oil Grease marks Stubborn spots

Mild abrasive detergents of the Jif type.

Heavy scale can be removed by the use of a hot 10% phosphoric acid solution.

Rinse and dry.

Rinse with ammonia and water.

Stains Light discolouration Dry. Hard water spots Scale and water marks generally Heat tint or heavy discolouration

Neglected surfaces discolouration due to accumulated grime

a. Jif, Chemico

a. Satisfactory on all finishes except mirrored and coloured.

b. Scotchbrite

b. Used on brushed finish along the grain only.

Use an abrasive paste such as T-cut.

On all but bright finish and coloured. This cannot be done in patches but only as a whole.

Paint

Use a paint stripper e.g. NitroUse of soft nylon or bristle brush on mors as directed by the manufac- textured patterns. turer then rinse with clean water.

Rust or Tea Staining

Grunt Emergel with a Scotchbrite pad.

Emergel stocked by Anzor.

Disclaimer: this is meant only as guide, and Anzor does not accept liability for the application of this information please consult the Nickel Institute for specific advice.

View online or download at: www.anzor.co.nz/maintenance Online catalogue:a PDF www.anzor.co.nz/arch

The Green & Economical Choice

STAINLESS STEEL - THE GREEN CHOICE •

100% Recyclable - it can be re-used by being melted down and re-cycled. 90% of stainless steel products are produced from recycled scrap metal.

•

Clean production - in the production of stainless steel fittings, there are no plating or coating processes which create environmental hazards, as can happen with other metals.

•

Green buildings - glass facades using stainless steel support systems reduce heating/cooling energy requirements in modern buildings.

STAINLESS STEEL - THE Economical CHOICE Cost vs Time of Stainless Steel Steel Cost $ Stainless Steel

Time Although stainless steel may cost more initially, when comparing the length of its useful life and its other properties, it is more cost-effective than alternatives. For example, it is more corrosionresistant than carbon steel, galvanized steel, and longer lasting and is stronger than polymer products, like GRP. The overall Life Cycle Cost of stainless steel makes it the smart choice.

Walt Disney Concert Hall - LA Cladding is Stainless Steel Completed in 2003

Online catalogue: www.anzor.co.nz/arch

DIVIDER INSERT HERE:

wire balustrading

ANZOR WIRE BALUSTRADING RANGE

STAINLESS WIRE BALUSTRADING INFILL SYSTEMS `V’ SHAPED VERTICAL wire balustrade within a metal frame Unobtrusive and low profile, minimising obstruction to views. Application: for all your balustrading needs, whether it be staircases or external decking. Wire: 2.5mm 7x7 316 or 316 Ultra Wire for increased corrosion resistance in coastal situations.

page 30

`V’ SHAPED VERTICAL wire balustrade for a timber frame Unobtrusive and low profile, minimising obstruction to views. Application: for external timber decking.

page 33

Wire: 2.5mm 7x7 316 or 316 Ultra Wire for increased corrosion resistance on all coastal applications.

ANERA LOCK - VERTICAL wire balustrade within a metal frame A clean, low-profile vertical wire balustrading system. Application: for internal and external balustrades. Wire: 3mm 7x19 316 or 316 Ultra Wire for increased corrosion resistance on all coastal applications.

page 37

SLIMFIX - HORIZONTAL wire balustrade An architecturally designed, low-profile tensioning unit.

Providing a more visually appealing alternative to traditional tensioning systems.

page 40

Application: internal applications such as balustrades, security grills (e.g in police stations) & horizontal fences. Wire: 1x19 316 Wire.

STAINLESS STEEL WIRE ROPE - see p.46 & 47 for our balustrading wire range. NB: some of the photos of balustrades shown in this catalogue may not meet the current regulations at the time of print. Please refer to the design specifications in this catalogue for the correct design. Also see Anzor’s disclaimer on page 9 www.anzor.co.nz/arch relating to photos in this catalogue. Online catalogue:

ANZOR BALUSTRADING EYELET

THE ANZOR BALUSTRADING EYELET

chamfered

For timber For metal

Would you like a clean, easy-to-install, low-profile balustrading eyelet? The Anzor balustrading eyelet is all of this, and has proven to be a popular choice for balustrades across New Zealand.

THE EYELET’S ADVANTAGES •

Unobtrusive and low profile, minimising obstruction to views.

•

From interior staircases to outdoor decking, the eyelet suits both stainless and timber balustrades and handrails.

•

Screwed, not welded, which eliminates the risk of the weld spots rusting.

•

Made from 316 Stainless Steel, which is then passivated for added corrosion resistance.

•

The hole in the eyelet is chamfered, greatly reducing the chance of chaffing and/or the wire spragging when it is pulled through the holes. PS1 available on request or visit www.anzor.co.nz/arch/producer-statements

Online catalogue: www.anzor.co.nz/anzor-eyelet

ANZOR EYELET FOR METAL

ANZOR EYELET - vertical wire balustrade within a metal frame 1200mm max. 90mm max.

1200mm max. height

ucer See Prod t Statemen n ns o o ti ca ifi spec page 35.

51 O/D x 1.6mm THICK min. Stainless Steel Tube

a(ii)

90mm max.

NB: Anzor does not supply the stainless metal framing, only the wire and wire components.

DECK

a(i)

PS1 available on REQUEST for info contact one of our product managers or visit www.anzor.co.nz/arch/producer-statements

EX- STOCK SUB JEC T TO PRIOR SALE

Components for the Wire Infill a) Anchoring the wire to the tube with the Anzor Eyelet This is a proprietary product developed by Anzor. The eyelets are screwed into the tube so that they donâ&#x20AC;&#x2122;t need to be welded, leaving a clean finish and reducing the chance of corrosion. There are two types: (i) Standard Anzor M6 Eyelet (product code: AHE). (ii) Eyelet used to fit M5 Jaw Turnbuckle for terminating wire (product code: AHEJ).

b) Wire When the wire is swaged (or crimped*), use 2.5mm 7x7 Anzor 316 (p.46) or 316 Ultra Stainless Steel wire (p.47).

c) Turnbuckles

1x19

7x7

When the wire is swaged, use an M5 Jaw/Swage Pipe Turnbuckle (S3121P-05) standard.

7x7

7x19

7x19 S3121P-05

When the wire is crimped* use an M5 Jaw/Jaw Pipe Turnbuckle (S312P). Use one at each end of the bay for improved tensioning - this ensures that the wires are taut. Wire to be tensioned to the specifications noted on the PS1. *PS1 applies for swaged wire only.

Online catalogue: www.anzor.co.nz/anzor-eyelet www.anzor.co.nz/arch

S312P

ANZOR EYELET FOR METAL

INSTALLATION INSTRUCTIONS •

Tube must have a minimum of 16swg or 1.5mm wall thickness.

•

The thread on the eyelet is M6 x 1mm pitch.

•

The drill size to use is 5mm. No larger.

•

To tap the thread - use a M6mm x 1mm pitch spiral point or gun tap (TLTAPGM6 - sold separately). The reason for using this type of tap is it pushes material ahead of the tap thus giving more material to tap into. These taps can be used with a drill.

•

Eyelets must not be over tightened - just screwed down until they sit in the correct alignment. Balustrading Height Building Type

Location

Min Height

Detached dwellings and within household units of multiunit dwellings

Stairs and ramps and their landings. Balconies and decks, and edges of internal floors.

900mm

All other buildings and common areas of multi-unit dwellings

Stairs and ramps Barriers within 530mm of front of fixed seating. All other areas.

900mm

1000mm

800mm

1100mm

As per F4/AS1 as at Dec 2008 of the NZ Building Code. Please visit www.dbh.govt.nz for the full document. Contractor: Rob Uddstrom Light Engineering Ltd, Blenheim.

HORIZONTAL FORCE: The initial installation and on going maintenance of the wire tension must be such, that the wire infill must resist a sphere not greater than 100mm being pushed through between the wires. The horizontal force that the infill must resist is to be equivalent to that exerted by a child of 6 years old. Therefore the estimated tension of the wire to be 10 kg. PS1 available on request, for further information visit www.anzor.co.nz/arch/producer-statements By Rob Uddstrom Light Engineering Ltd

Contractor: About Stairs & Balustrades Ltd, Auckland.

Online catalogue: www.anzor.co.nz/anzor-eyelet www.anzor.co.nz/arch

ANZOR EYELET FOR TIMBER

ANZOR EYELET - vertical wire balustrade within a timber frame

140 x 50min. Top rail continuous over two or more spans.

1200mm max. 90mm max.

14g - Anzor Timber Eyelet at 90mm ctrs.

ELEVATION OF BALUSTRADE

65 x 50min. Timber spanning between balusters.

10g x 75mm CSK screws at 250mm ctrs - spaced evenly over each span.

Deck rail tie connector (on request)

1200mm max. height

ucer See Prod t Statemen n ns o o ti ca ifi spec page 36.

Timber decking, fix to 150x50 or greater edge deck joist.

a(ii)

a(i)

PS1 available on REQUEST for info contact one of our product managers or visit www.anzor.co.nz/arch/producer-statements

c) EX- STOCK SUB JEC T TO PRIOR SALE

Components for the Wire Infill a) Anchoring the wire to timber with the Anzor Eyelet This is a proprietary product developed by Anzor. The eyelets are screwed into the timber frame. There are two types: (i) Anzor Timber Eyelet 14g (product code: AHEW). (ii) Eyelet used to fit M5 Jaw Turnbuckle for terminating wire (product code: AHEWJ). To install use the Anzor Socket Tool (product code: AHEWTOOL).

b) Wire When the wire is swaged (or crimped*), use 2.5mm Anzor 316 (p.46) or 316 Ultra Stainless Steel wire (p.47).

c) Jaw/Swage Turnbuckles

1x19

7x7

7x19

7x19 S3121P-05

When the wire is swaged, use an M5 Jaw/Swage Pipe Turnbuckle (S3121P-05) standard. When the wire is crimped*, use an M5 Jaw/Jaw Pipe Turnbuckle (S312P) Use one at each end of the bay for improved tensioning - this ensures that the wires are taut. Wire to be tensioned to the specifications noted on the PS1. *PS1 applies for swaged wire only.

Online catalogue: www.anzor.co.nz/anzor-eyelet www.anzor.co.nz/arch

S312P

ANZOR EYELET FOR TIMBER

Balustrading Height Building Type

Location

Min Height

Detached dwellings and within household units of multiunit dwellings

Stairs and ramps and their landings. Balconies and decks, and edges of internal floors.

900mm

All other buildings and common areas of multi-unit dwellings

Stairs and ramps Barriers within 530mm of front of fixed seating. All other areas.

900mm

1000mm

800mm

1100mm

As per F4/AS1 as at Dec 2008 of the NZ Building Code. Please visit www.dbh.govt.nz for the full document.

INSTALLATION: Use the Anzor Eyelet Socket Tool for fixing the timber eyelet to the hand rail. Product code: AHEWTOOL NB Socket Tool Sold Separately

Online catalogue: www.anzor.co.nz/anzor-eyelet www.anzor.co.nz/arch

within a metal frame

ANZOR EYELET - vertical wire balustrade

ANZOR EYELET FOR METAL

Producer Statements and specifications www.anzor.co.nz/arch/producer-statements

within a timber frame

ANZOR EYELET - vertical wire balustrade

ANZOR EYELET FOR TIMBER

ANERA LOCK

A CLEAN, LOW-PROFILE VERTICAL WIRE BALUSTRADING SYSTEM WHY USE THE ANERA LOCK? •

The top fastener is invisible providing a clean, unobtrusive look.

•

Easy and fast installation.

•

Wire & external fittings are 316 Stainless Steel.

•

It is strength tested up to 550Kgs.

•

The top component is Aluminium coated in Nickel Phosphorus resulting in high corrosion resistance.

•

The top component prevents the wire from touching the tube sides, by sitting in the 8mm hole.

•

PS1 Producer Statement - available on request

“CLEAN, UNOBTRUSIVE LOOK” The Anera Lock fastens to the wire on the inside of the tube, meaning it can’t be seen.

Online catalogue: www.anzor.co.nz/aneralock

ANERA LOCK

1200mm max. FULL BUTT WELD

a) Anera Lock concealed

TOP RAIL BY OTHERS

stainless steel fitting

(51 O/D x 1.6 THK, minimum)

90mm max. 1200mm max height

spacing between wires

b) 3.0mm min. DIA

90mm max

7x19 wire STAINLESS STEEL WIRE ROPE

See Producer Statement specifications on page 39.

Deck Floor Level

51 O/D x 1.6 THK STAINLESS STEEL HORIZONTAL INFILL FRAMING TUBES

c) STAINLESS STEEL TENSIONING BOLT

PS1 available on REQUEST for info contact one of our product managers or visit www.anzor.co.nz/arch/producer-statements EX- STOCK SUB JEC T TO PRIOR SALE

Components for the Anera Lock System a) Anera Lock - this fastens to the wire inside the top tube. Anera Lock Top Fitting for 3.0mm wire (product code: AAT03).

b) Wire 3.0mm 7x19 Anzor 316 (p.46) or 316 Ultra Stainless Steel wire (p.47).

c) Tensioning with the Anera Lock bottom fitting.

1x19

7x7

7x19

Anera Lock Bottom Fitting 316 3mm (product code: AAB03). Use at the bottom for tensioning - this ensures that the wires are taut.

INSTALLATION: A Hex swaging hand tool is all thatâ&#x20AC;&#x2122;s required for a fast and easy installation. Available to hire from your local Anzor branch. Product code: TLCPH...

Regarding Horizontal Force - see page 34.

Online catalogue: www.anzor.co.nz/aneralock www.anzor.co.nz/arch

3.0

ANERA LOCK DESIGN

Producer Statements and specifications www.anzor.co.nz/arch/producer-statements

SLIMFIX WIRE BALUSTRADING

THE ULTIMATE ARCHITECTURAL LOOK FOR STAINLESS HORIZONTAL WIRE BALUSTRADING INFILL

WHAT IS SLIMFIX? • An architecturally designed, low-profile tensioning unit, providing a more visually appealing alternative to traditional horizontal tensioning systems.

Traditional vs Slimfix

• It conceals all threads and crimps, leaving a clean finish. • It is made from 316 Stainless Steel. • Anzor stocks fittings for use with 2.5, 3.0 & 4.0mm wire.

WHERE IS IT USED? • Balustrades (restrictions in NZ apply*) • Security grills (e.g. in Police stations) • Fences – horizontally between posts

A Slim, Compact Profile.

*NB: please ensure use meets NZ Building Standards.

Photos may be of international projects and may not adhere to standards, as horizontal wire can only be used in some circumstances in NZ.

Online catalogue: www.anzor.co.nz/slimfix www.anzor.co.nz/arch Information used exclusively under permission of Strudyna Co. Ltd

SLIMFIX WIRE BALUSTRADING

CHOOSING THE CORRECT SLIMFIX TYPE AND SIZE Step 1 - select the type Circular Bolt - for Tube and Flat Bar

Angle Circular Bolt - for Tube and Flat Bar Wire can be run straight or at angles.

Wooden Screw - for Timber

Step 2 - single or double adjuster Single Adjuster Recommended wire length for 2.5, 3 & 4mm wire - length not to exceed 2m

Double Adjuster Recommended wire length for 2.5 & 3mm wire - length not to exceed 3m 4mm wire - length not to exceed 4m

System is not designed to be used for long wire lengths. Recommendations are based on the limitations of the tensioner, see p.42 for component breakdown of one adjuster (14mm).

Online catalogue: www.anzor.co.nz/arch Information used exclusively under permission of Strudyna Co. Ltd

SLIMFIX WIRE BALUSTRADING

Step 3 - selecT the correct screw leNgth screw length - depending on the material for youR application.

Short Screw

Medium Screw

Long Screw

Circular Bolt or Angle Screw Length Options WIRE SIZE

SHORT SCREW SET

MEDIUM SCREW SET

Wood Screw Length Options WIRE SIZE

LONG SCREW SET

SCREW LENGTH

Ø2.5mm

14 mm

24 mm

60 mm

Ø2.5mm

40 mm

Ø3mm

14 mm

24 mm

60 mm

Ø3mm

40 mm

Ø4mm

14 mm

24 mm

60 mm

Ø4mm

40 mm

Ø5mm

18 mm

40 mm

75 mm

Ø5mm

55 mm

Ø6mm

24 mm

60 mm

100 mm

Ø6mm

65 mm

Ø8mm

26 mm

75 mm

120 mm

Ø8mm

71 mm

Ex-stock

NB: Wire sizes 5, 6 & 8mm are available to order on request.

NB: Choosing a wire size below 4mm is more economical as hand tools can be used onsite. Wire sizes 5-8mm require hydraulic installation equipment.

COMPONENT BREAKDOWN Screw

Main Body

End Cap

Tensioner

Crimp

14mm

Spanner Flat

Max Tensioning Capability.

Wire ROPE We recommend using 316 1x19 Wire with Slimfix. See p.46 for wire sizes and characteristics.

How it works The wire is passed through the end cap and tensioner, and is then crimped. The tensioner is then screwed into the main body, and the end cap covers the thread.

Online catalogue: www.anzor.co.nz/slimfix www.anzor.co.nz/arch Information used exclusively under permission of Strudyna Co. Ltd

SLIMFIX WIRE BALUSTRADING

SLIMFIX CAN BE INSTALLED INTO A VARIETY OF MATERIALS METAL BAR

CIRCULAR PIPE

SQUARE PIPE

MARBLE

WOOD

CEMENT

With Drop-In Anchor

Recommended maximum wire length Single ADJUSTER: 14mm adjustment, wire length for 2.5, 3 & 4mm not to exceed 2M. Double ADJUSTER: 28mm adjustment, recommended wire length for 2.5 & 3mm wire - not to exceed 3M. 4mm wire - not to exceed 4M.

Online catalogue and gallery www.anzor.co.nz/slimfix Copyright ÂŠ 2011 Strudyna

Information used exclusively under permission of Strudyna Co. Ltd

SLIMFIX WIRE BALUSTRADING

INSTALLING THE DIFFERENT SCENARIOS Tube - using 2.5, 3 & 4mm wire rope. As an alternative to using the Circular Bolt (see p.42) you can use Threaded Inserts to screw the Slimfix into tube.

Threaded Insert

Similar to installing a pop rivet, but when installed the threaded insert leaves an internal thread to screw into.

Joining Slimfix Where a Slimfix is required either side of a post, these can be joined by drilling a hole through the post and installing a threaded stud M8 x 85. Place an M8 Hex Nut and Washer either side of the post, and approx. 12mm of threaded stud sticking out either side, the Slimfix fitting can then be wound onto each end.

For a full installation guide - please visit www.anzor.co.nz/arch/slimfix

Hand tools are required for installation. Slimfix Inclamp tool For swaging 2.5, 3 & 4mm Terminals.

Available to hire or purchase from your local Anzor Branch. (product code: ASDSFINCLAMP)

NB: Wire sizes 5-8mm requires hydraulic installation equipment. Available for hire or purchase.

Online catalogue: www.anzor.co.nz/slimfix www.anzor.co.nz/arch Information used exclusively under permission of Strudyna Co. Ltd

SLIMFIX WIRE BALUSTRADING

Additional Angle End Cap Options

SlimKey

A minimum of 2 Slimkeys is required per installation.

Additional locking nut for the outside of the balustrades post when using the Angle Screw.

Product code: ASDSSK

Angle End Cap

Angle Crossing End Cap

Loctite - upon installation, we recommend applying Loctite 243 for permanent fixture.

Angle Ball End Cap Available on request - sold separately.

NZ BUILDING CODE: Horizontal wires are restricted by clause F4 in the NZ Building Code.

Visit www.dbh.govt.nz for more info on NZ building regulations.

Online catalogue and gallery www.anzor.co.nz/slimfix Copyright ÂŠ 2011 Strudyna

Information used exclusively under permission of Strudyna Co. Ltd

HAMMA HAMMA PRO-STRAND PRO-STRAND

Application: Predominantly used for structural cables, e.g glass facades

Strudyna is proud to offer Hamma cables as part of Strudyna's tensile Multiple annealing stages dur Specific features: cable systems. Hamma cables are develope d- Smooth exclusivel y for high does not work harden, and fin - Extremely non-flexible. clean finish. Benefits Benefits -- Built Builtwith withMicro MicroStretch StretchTechnology Technology(MST), (MST),the theMinimum MinimumBreaking Breaking - High breaking strain. - No pre-stress required. 1x7 tensile 1x19 Strength (MBS) is 20-30% higher than conventional wire performances through unique techniques that differentiate bath remove1x19 any impuri Strength (MBS)from is 20-30% higher thanto conventional 1x19 wireof ofthe the - Extremely low stretch. same samesize. size.This Thismeans meansthat thatyou youcan candownsize downsizethe thestructural structuralcable cable other manufactures. Hamma cables start with the highest quality of manufacture . This makes Ha and andmaintain maintainthe thestrength. strength.This Thisresults resultsin inimproved improvedaesthetics, aesthetics,less less weight in the structure, and cost savings on smaller fittings, which weight insteel the structure, savings on smaller fittings, stainless steel source follow by unique descaling of stainless rod and cost corrosion resistance forwhich extrem can canbe besignificant significanton onlarge largeprojects. projects. HAMMA X-STRAND to remove impurities, which may have attached during transport, prior to well as increased work life du 316 WIRE ROPE Benefits - Enhanced corrosionTypes resistance. Produced with a high level Compact wire strand in constructions 1x7, 1x19, 1x25 : Types 1x7,longevity 1x19, 1x25 of the wire. : Compact wire strand in constructions commencing production. ensuring of descaling and ultrasonic impurities. Stainless Steel Material :: 316 316of Stainless Steel Materialremoval 7x19 Resulting in longer lasting shine and ultimate corrosion aesthetic finish due to an ex Sizes :: 1.6mm Sizes 1.6mm--12mm 12mm resistance, better forFinish NZ’s harsh::corrosive conditions. Bright smooth corrosion resistance. Types Finish Brightand and smoothfor forincreased increased corrosion resistance. : 1x19 (rig exterior.

ologies.

HAMMA PRO-STRA Sizes ROPE : 0.8mm -CHARACTERISTICS 19mm WIRE AND Specific Specificfeatures: features: Types : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible) -- Extremely non-flexible. -- Smooth Extremely non-flexible. Smoothclean cleanfinish. finish. Finish : Bright and smooth for increased corrosion resistance. BREAKING LOADS High breaking strain. No pre-stress required. 1x7 1x19 High breaking strain. No pre-stress required. 1x7 1x19 Material

with Micro-stretch Technologies. with Micro-stretch Technologies.

Application: Predominantly : 316 Stainless Steel Application: Predominantlyused usedfor forstructural structuralcables, cables,e.g e.gglass glassfacades facades

-- Extremely Extremely low stretch. shade sails, foliage trellises,low andstretch. Anzor 316 WireApplication: ROPE Balustrades, architectural rigging.

1x19 1x19

7x7 7x7

- Built with Micro Str Strength (MBS) is 2 Recommended for exterior use in coastal areas. Benefits - Wide range of sizes and configurations.same size. This mea HAMMA X-STRAND HAMMA X-STRAND Code: MFW...U - Economical pricing. and maintain the st Benefits aahigh level Benefits -- Enhanced Enhancedcorrosion corrosionresistance. resistance.Produced Producedwith with high level Maintenance: Wire rope must be cleaned & maintained regularly. of ofdescaling descalingand andultrasonic ultrasonicremoval removalof ofimpurities. impurities. weight in the struct Material & Cleaning : 316 Stainless Steel. See our Maintenance guidelines on p.21. Resulting in lasting Resulting inlonger longer lastingshine shineand andultimate ultimatecorrosion corrosion can be significant o resistance, better for NZ’s harsh corrosive conditions. : 1mm - 10mm. Size

7x19 7x19

HAMMA MEGA-STRAND Types

Benefits

resistance, better for NZ’s harsh corrosive conditions.

: 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible).

Material Material :: 316 316Stainless StainlessSteel Steel Types : Compact wire stran - Designed for large structural projects. To date this is the largest Sizes :: 0.8mm Sizes 0.8mm--19mm 19mm stainless steel strand on the market. Material : 316 Stainless Steel Types :Balustrades, (semi-flexible), 7x19 (flexible) Application: shade sails, foliage Types : 1x19 1x19(rigid), (rigid),7x7 7x7 (semi-flexible), 7x19trellises, (flexible) Finish :: Bright and for corrosion resistance. Finish Bright andsmooth smoothrigging. forincreased increased corrosion resistance. Sizes : 1.6mm - 12mm and architectural Types : A conventional 1x37 and 1x61 construction wire stand. Material : 316 Stainless Steel Application: Balustrades, shade sails, Finish : Bright and smooth Application: Balustrades, shade sails,foliage foliagetrellises, trellises,and and Sizes : 20mm - 42mm. Code: MFW... architectural rigging. architectural rigging. Finish : Bright and smooth for increased corrosion resistance. Application: Predominantly used Recommended for use in areas. Recommended forexterior exterior useon incoastal coastal areas. Material Test Certs available request with order. Application: Large structural projects, such as bridges. Code: MFW...U Code: MFW...U Specific features: Specific features: Maintenance: Wire rope must be cleaned & maintained regularly. with Micro-stretch Technologies. - Low stretch. Maintenance: rope must be cleaned & maintained regularly. Maintenance: Wire Wire rope must be cleaned & maintained regularly. Extremely our Maintenance & Cleaning guidelines on non-flexible p.21. - Higher comparative breaking strain.SeeSee on Seeour ourMaintenance Maintenance& &Cleaning Cleaningguidelines onp.21. p.21. - Wide cable size1x7 range. 1x19 -guidelines High breaking strain. - Compatible with both splicing and swaging. Extremely low stretch. EX- STOCK - Good corrosion resistance. Breaking SUB JEC T Wire Rope Size Characteristics 1x37 1x61 Benefits this is the Benefits -- Designed Designedfor forlarge largestructural structuralprojects. projects.To Todate dateTO this isOR thelargest largest PRI Load stainless SALE stainlesssteel steelstrand strandon onthe themarket. market. Benefits

Anzor 316 - Wire

HAMMA HAMMA MEGA-STRAND MEGA-STRAND

al cable

2.0 mm 2.5 mm 3.0 mm 4.0 mm 5.0 mm 6.0 7x19 mm 8.0 mm

1x19

7x7

with Ultimate Structural cable with Ultimate Structural cable

1x19

7x7

7x19

1.0 mm 60 kg 1.5 mm 122 kg 2.0 mm 1x37 235 kg 1x37 1x61 1x61 2.5 mm 428 kg

2.0 mm 2.5 mm 3.0 mm 4.0 mm 5.0 mm 6.0 mm 8.0 mm 10.0 mm

7x19

340 kg 500 kg 720 kg 1,285 kg 2,000kg 2,876 kg 4,640 kg

230 kg 380 kg 540 kg 950 kg 1,490 kg 1,910 kg 3,400 kg 5,310 kg

HAMMA X-STRAND

Types :: AAconventional 1x37 and 1x61 construction Typesnon-flexible, conventional 1x37 andin 1x61 construction wirestand. stand. - Is rigid. low stretch ideal straight lines. wire Material Material

:: 316 316Stainless StainlessSteel Steel

- Higher Sizes :: 20mm --42mm. Sizescomparative 20mmbreaking 42mm. strain.

- Enhanced corrosion of descaling and ul - Commonly used with swage fittings & Slimfix fittings. Resulting in longer Specific Specificfeatures: features: -- Low Lowstretch. stretch. resistance, better fo Benefits

Finish :: Bright for corrosion resistance. Finish Bright andsmooth smooth forincreased increased corrosion resistance. - Fewer crevices, traps and less dirt, therefore less likely to `tea-stain’. Application: Application: Large Largestructural structuralprojects, projects,such suchas asbridges. bridges.

- Higher comparative breaking strain. - Wide cable size range. and -- Compatible - Low-medium stretch. with Material Compatible withboth bothsplicing splicing andswaging. swaging. : -- Good Goodcorrosion corrosion resistance. Sizes - Medium breaking strain. resistance. : - Higher comparative breaking strain. - Semi-flexible. - Wide cable size range.

316 Stainless Steel 0.8mm - 19mm - Can be terminated with crimps, or canTypes also be swaged. : 1x19 (rigid), 7x7 (se - Commonly used with Anzor Eyelet fittings. Finish : Bright and smooth - Very flexible. - Medium stretch. - Medium-low breaking strain.

Application: Balustrades, shade architectural rigging Recommended for

- Can be terminated with crimps, or can also be swaged.

Code: - More crevices so higher risk of to tea-staining. - Commonly used with Anera Lock.

Maintenance:

*Refer to p.105 for our guidelines on Safe Working Loads. MINIMUM IMPOSED ACTIONS FOR BARRIERS

Cleaning & Maintenance is require d.

Online

Wire rope must b See our Mainten

HAMMA MEGA-STR Benefits

Refer to Table 3.3 from AS/NZS 1170.1:2002 Structural design actions - permanent, imposed and other actions available from Standards New Zealand. Types

See p. 21

MFW...U

- Designed for large stainless steel stran

: Material : Please visit: www.standards.co.nz Sizes : Finish : catalogue: www.anzor.co.nz/wireApplication:

A conventional 1x3 316 Stainless Steel 20mm - 42mm. Bright and smooth Large structural pro

to an excellent surface brightness and smooth Breaking Benefits aesthetic - Builtfinish withdue Micro Stretch Technology (MST), the Minimum Types : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible) exterior. Strength (MBS) is 20-30% higher than conventional 1x19 wire of the samePRO-STRAND size. This means that you can downsize the structural cable HAMMA and maintain strength.cables This results in improved aesthetics,tensi less Strudyna is proud to offertheHamma as part of Strudyna's Strudyna is proud to offer Hamma cables as part of Strudyna's tensile Multiple annealing stages weight in the structure, and cost savings on smaller fittings, which cable systems. Hamma cables are develope d exclusivel y for hig cable systems. Hamma cables are develope d- exclusivel y on for high does the notMinimum work harden, Benefits can Built with Micro Stretch Technology Breaking an be significant large projects. (MST),

tensile performances through techniques that differentiate from Strength (MBS) is unique 20-30% higher than conventional 1x19 wire of the tensile performances through unique techniques that differentiate from bath tothe remove any im same size. This means that you can downsize structural cable : Compact wire strandcables in constructions 1x7, 1x19, 1x25 ROPE Typesmanufactures. other Hamma startULTRA with theWIRE highest quality o 316 andhighest maintain the strength. This results in improved aesthetics, other manufactures. Hamma cablesMaterial start with the quality of manufacture . This less make : 316 Stainless Steel weight in the structure, and cost savings on smaller fittings, which stainless steel source follow by unique descaling of stainless steel ro -be 12mm Sizesdescaling : 1.6mm stainless steel source follow by unique of steel rodprojects. corrosion resistance for e canstainless significant on large to Finish remove impurities, which may have attached during transport, prior smooth for increased corrosion resistance. to remove impurities, which may have attached: Bright duringand transport, prior to well as increased work li Types production. : Compact wire strand in constructions 1x7, 1x19, 1x25 commencing Application: Predominantly used for structural cables, e.g glass facades of the commencing production. ensuring longevity Material : 316 Stainless Steel Strudyna is proud Hamma Strudyna's tensile Sizes to offer : 1.6mm - 12mmcables as part of aesthetic finish due to a Specific features: Finish : Bright and smooth for increased corrosion resistance. cable systems. -Hamma are develope d clean exclusivel y for high : 1x19 Extremelycables non-flexible. - Smooth finish.Types exterior. Application: Predominantly for cables, e.g glass facades - Highthrough breaking strain. used - structural No pre-stress required. 1x19 Wire tensile performances unique techniques that differentiate from Anzor 316 1x7 Ultra Rope Extremely low stretch. Specific features: other manufactures. Hamma cables start with the highest quality of - Extremely non-flexible. - Smooth clean finish. Higher corrosion resistance than standard wire, due the wire stainless steel 316 source follow by to unique descaling of stainless - High breaking strain. - No pre-stress required. steel rod 1x7 1x19 undergoing additional treatments. Extremely low stretch. to removeHAMMA impurities, which may have attached during transport, prior to X-STRAND Benefits - Built withduring Micr Strudyna is proud to offer Hamma cables as part of Strudyna's tensile Multiple annealing stages commencing production. Benefits Enhanced corrosion resistance. Produced with a high level Strength (MBS cable systems. Hamma cables are develope d exclusivel y for high does not work harden, and finish of descaling and ultrasonic removal of impurities. X-STRAND same This 7x7 tensile 7x19 performances through unique techniquesHAMMA that differentiate from bath and to ultimate remove any size. impuritie Resulting in longer lasting shine corrosion Benefits - Enhanced corrosion resistance. Produced with a high levelmaintain t and resistance, better for NZâ&#x20AC;&#x2122;s harsh corrosive conditions. other manufactures. Hamma cables start with the highest quality of manufacture . This makes Hamm of descaling and ultrasonic removal of impurities. 1x19 7x7 7x19 weight in the s Resulting in longer shine and ultimate corrosion stainless steel source follow by unique descaling of stainless steel rod lastingcorrosion resistance for extreme Material : 316 resistance, Stainless Steel better for NZâ&#x20AC;&#x2122;s harsh corrosive conditions. can be significa to remove impurities, which may have attached prior to well as increased work life due Sizesduring: transport, 0.8mm - 19mm : 316 Stainless TypesMaterial : 1x19 (rigid), 7x7 Steel (semi-flexible), 7x19 (flexible) commencing production. ensuring longevity of the wire. wireHa : Compact : 0.8mm 19mm for increasedTypes FinishSizes : Bright and -smooth corrosion resistance. Ben aesthetic finish : due an exce Types : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible) 316 to Stainless S Material Finish : Bright and smooth for increased corrosion resistance.: 1x19 (rigid Types exterior. Application: Balustrades, shade sails, foliage trellises, and : 1.6mm - 12mm Sizes architectural rigging. Application: Balustrades, shade sails, foliage trellises, and : Bright and smo Finish

with Micro-stretch Technologies.

HAMMA PRO-ST

with Micro-stretch Technologies.

1x19

HAMMA PRO-STRAN

Recommended for exterior use in coastal areas. architectural rigging.

Anzor 316 - Ultra Wire with Micro-stretch Technologies.

Code:

Recommended for exterior useApplication: in coastal areas.

MFW...U

Predominantly

MFW...U

with Micro-stretch Technologies. Maintenance: Wire rope must be cleaned & Specific maintained regularly. features: - Built with Micro Stretc Maintenance: Wire rope must beBenefits cleaned & maintained regularly. See our Maintenance & Cleaning guidelines on p.21. non-flex - Extremely Typ

Strength (MBS) See our Maintenance & Cleaning guidelines on p.21.

is 201x19 High breaking stra Ma same size. This means 1x7 1x19 HAMMA MEGA-STRAND HAMMA MEGA-STRAND Extremely low stre Size and maintain the stren *Breaking Benefits Size *Breaking - Designed for for large structural projects. To date datethis thisisisthe the largestFini Benefits - Designed large structural projects. To largest Wire Rope weight in the structur Load (Kg) Load (Kg) stainless steel strand themarket. market. stainless steel strand onon the can be significant on l 53 5.0 mm 1,620 App Types : A conventional 1x37 and 1x61 construction wire stand.

1x7

Wire Rope

Size

0.8 mm Types : A conventional wire stand. 84 1.0 mm 6.01x37 mm and 1x61 2,320construction Cleaning & Material : 316 Stainless Steel 1.5 mm 189 mm 3,160 Material : 316 Stainless7.0 Steel Maintenance Types Compact wire strand : Sizes : 20mm - 42mm. Spe with Micro-stretch Technologies. 336 2.0 mm 8.0 mm 3,670 is required. Sizes Finish : 20mm - 42mm. Benefits Enhanced corro : Bright and smooth forMaterial increased corrosion resistance. 316 Stainless Steel : 2.5 mm 525 10.0 mm 5,750 FinishApplication: : Bright andstructural smoothprojects, for increased Large such ascorrosion bridges. resistance. See p.21 of descaling an 1x19 7x7 7x19 mm 756 12.0 projects, mm Sizes 8,270as bridges. : 1.6mm - 12mm Application: Large structural such 1x19 7x73.0 7x19 1x7 1x19 3.5 mm 1,030 14.0 mm 11,200 Specific features: Resulting in for lon Finish : Bright and smooth refer to p46 for 4.0 mm 1,340 14,700 - Low stretch. 16.0 mm Specific features: characteristics resistance, bett - Higher comparative breaking strain. 1,702 4.5 mm 18.0 mm 21,000 - Low stretch. Application: Predominantly used fo Wide cable size range. 5.0 mm 2,100 - Higher comparative breaking strain. swaging. - Compatible with 3,030 6.0 mm 59 Material 1.0 both mm splicing and : 316 Stainless S - Wide cable size range. HIGHLIGHTED - Good corrosion resistance. Specific features: 7.0 mm 4,120 134 1.5 mm with Micro-stretch Technologies. SIZES IN STOCK. - Compatible with both splicing and swaging. Sizes : 0.8mm - 19mm 7x7 1x37 1x615,380 8.0 mm 2.0 mm 239 - Extremely OTHERS AVAILABLE non-flexible. - Good corrosion resistance. ON REQUEST. 10.0 mm 8,400 2.5 mm 373 Types : 1x19 (rigid), 7x 1x3712.0 1x61 High breaking strain. Ben 1x19 mm 12,1021x7 3.0 mm 538 Finish : Bright and smo 16,473 14.0 mm 731 - Extremely low stretch. 3.5 mm 1x19 7x7 7x19 20,500 16.0 mm 956 4.0 mm 19.0 mm 30,300 4.5 mm 1,206 Application: Balustrades, sh 1,490 5.0 mm architectural rig 0.8 mm 38 2,150 6.0 mm Recommended 1.0 mm 59 7.0 mm 2,930 Ma 1.5 mm 145 8.0 mm 3,400 Size 258 2.0 mm - Enhanced corrosion re 10.0 mm Benefits 5,310 Code: MFW...U 374 2.5 mm 7,650 12.0 mm Typ of descaling and ultra 3.0 mm 581 1x19 7x7 7x19 10,400 14.0 mm Maintenance: ropeFini m ResultingWire in longer las 733 3.5 mm 16.0 mm 13,600 1,030 4.0 mm 19,300 18.0 mm resistance, better for N See our Mai 4.5 mm 1,312 20.0 mm 23,900 App

HAMMA X-STRA

with Ultimate Structural cable

HAMMA X-STRAND

HAMMA MEGA-S

Material : 316 Stainless Steel Sizes : 0.8mm - 19mm Benefits Designed for la Types : 1x19 -(rigid), 7x7 (sem *Refer to p.105 for our guidelines on Safe Working Loads. Cod stainless steel Finish : Bright and smooth for

Online catalogue: www.anzor.co.nz/wire www.anzor.co.nz/arch

Mai Types Balustrades, : A conventional Application: shade sa Material : 316 Stainless architectural rigging.S Sizes Recommended : 20mm - 42mm for ex

WIRE TERMINATION OPTIONS

wire termination options EX- STOCK SUB JEC T TO PRIOR SALE

Crimping & wire rope grips Crimped Wire with Thimble

COMPONENTS

Simple hand tool DIY installation at an economical price and still architecturally appealing.

7x7 316 Semi-flexible Wire Rope - best wire 1x19 type

Crimps

Copper or Nickel plated copper crimp

Crimping tool for hire or purchase

7x7

7x19

7x7

7x19

Wire Thimble

COMPONENTS

Wire Rope Grips Simple and affordable - DIY easy installtion.

7x7 316 Semi-flexible Wire Rope - best wire1x19 type

Wire Rope Grips

Wire Thimble

Hex & Roll Swaged Hex Swaged Visually appealing and unobtrusive - DIY hand tool installtion.

Hex Swage (Swage end on turnbuckle or swage terminal) using a 3, 4 or 5mm Hex Swage Tool. (available to hire from your local Anzor branch) NB: Use a Pan Skt Barrel Nut for tensioning onto tube such as 50mm handrail tube (see p.50).

Roll Swaged For a smooth finish.

Roll Swage (Swage end on turnbuckle or swage terminal). Professional installation with increased strength. NB: Try using a Dome Nut on the Swage Stud for a cleaner finish.

SWAGING COMPONENTS Best wire type for swaging - 1x19 316 Wire Rope.

S7802F Eye Terminal

S7803 Fork Terminal (see p.97)

S7801 Swage Stud

S3121P Jaw/Swage Pipe Turnbuckle (see p.96)

1x19

7x7

7x19

S7805 Swage Toggle Terminal (see p.97)

S3212/5 Toggle/Swage Pipe Turnbuckle (see p.95)

Online catalogue: www.anzor.co.nz/wire www.anzor.co.nz/arch

WIRE TERMINATION OPTIONS

fastening turnbuckles and terminals EX- STOCK SUB JEC T TO PRIOR SALE

to concrete Drop-In Anchor

+ Drop-In Anchor - p.143

or S7801 Swage Stud

Wire Termination Option

S306 Eye Bolt See p.144 for our full Eye Bolt range.

NB: Use Setting Tool for correct installation

Wedge or Sleeve Anchor + Eye Nut

or Wedge Anchor - p.147

Sleeve Anchor - p.146

Wire Termination Option

S3061 Eye Nut - p.144

Jaw Turnbuckle or Fork Terminal wire looped through eye & crimped.

wire looped through eye + crimped. Not recommended for high loading. EX- STOCK SUB JEC T TO PRIOR SALE

to timber Lagscew + Eye Nut Lagscrew - p.140

Wire Termination Option

S3061 Eye Nut - p.144

For a flush finish: wind the lagscrew into the timber past the top of the spanner flat, then cut the machine thread down so the eye nut winds to the start of the spanner flat.

Eye Screw

Turnbuckle can be attached to Anzor Timber Eyelet (AHEWJ)

or S3182 Eye Screw

14g Anzor Timber Eyelet

(product code: AHEW)

PS1 available on request for AHEW & AHEWJ to be used on a timber balustrade.

Timber eyelet (AHEWJ) can only fit an M5 Turnbuckle (S3121P) for 2.5mm wire (see p.96).

Online catalogue: www.anzor.co.nz/wire www.anzor.co.nz/arch

WIRE TERMINATION OPTIONS

EX- STOCK SUB JEC T TO PRIOR SALE

Swage stud to TUBE

Pan Socket Barrel Nut Pan Skt Barrel Nut

S7801 Swage Stud

Pan Socket Barrel Nut -

Swage stud fastened into barrel nut.

tightened with allen key.

Tighten barrel nut to tension wire.

316 stainless steel wire rope

Washer Possibly a 50mm Tube or similar EX- STOCK SUB JEC T TO PRIOR SALE

Swage stud to Angle bracket

Hex Nut to Angle Bracket Hex Nut

316 stainless teel wire rope

S7801 Swage Stud

Nylon isolating washer (if bracket is galv) with a stainless washer and hex nut.

Tighten hex nut to tension wire.

Swage stud

Possibly a B550 Stainless Steel Bowmac Bracket or similar. EX- STOCK SUB JEC T TO PRIOR SALE

Left Hand threaded Swage stud Drop-In Anchor to Swage Turnbuckle

+ Drop-In Anchor NB: Use Setting Tool for correct installation

+ Threaded Stud

+ S3121P Jaw/Swage Pipe Turnbuckle (see p.96)

SF7801L LH Swage Stud

Turnbuckle - NB: this turnbuckle is modified by replacing the RH Drop-In Anchor or Stud for Chemical Anchor (see p.143

standard swage stud with a RH threaded stud (to go into drop-in anchor) and replacing the Jaw with a LH swage stud (sold separately).

RH Threaded stud. (sold separately)

LH Swage stud (sold separately)

Other fastening options to replace the threaded stud could include: A Lagscrew into timber, Hex Setscrew or Button Socket Screw through a plate.

Online catalogue: www.anzor.co.nz/wire www.anzor.co.nz/arch

WIRE TERMINATION OPTIONS

EX- STOCK SUB JEC T TO PRIOR SALE

ASS SCREW TERMINALS

ASS Screw Terminal with external thread. •

Self assembly screw terminals designed for easy on-site fitting.

•

Designed for 2, 3 and 4mm wire rope.

•

Made from 304 Stainless Steel.

•

Ideal for internal use.

Alternative Terminal Options

Screw Terminal - internal RH Thread

Screw Terminal with Eye

(Product Code: ATSMIRW03M)

(Product Code: ATSMERW)

Screw Terminal with Jaw

Screw Terminal Mini - internal RH Thread

(Product Code: ATSMJRW)

(Product Code: ATSMIRW)

EX- STOCK SUB JEC T TO PRIOR SALE

ATTACHING SLEEVE - HIDDEN THREAD Fixing To Concrete SLIMFIX END CAP

M8 Sleeve Anchor

In-Clamp Crimp

Product Code: DYM6 (see p.146)

Product Code :ASDSFICR

2.8mm Dia. hole

M8 Slimfix End Cap

End Cap

Product Code :ASDSEC

Terminating a wire with a hidden thread - lagscrew or sleeve anchor

Fixing To Timber M8 Lagscrew

•

Slim and unobtrusive design.

Product Code: LSM (see p.140)

•

Easy installation with hand tools (see p.44 for installation tools).

•

Designed for 2.5mm wire (3 & 4mm available on request).

End Cap

•

Online catalogue: www.anzor.co.nz/wire www.anzor.co.nz/arch

Made from 316 Stainless Steel.

webnet

DIVIDER INSERT HERE:

webnet webnet

WEBNET

webnet BY JAKOB Made from stainless steel wires, Webnet has skin-like characteristics. It can form a plane surface but can also be tensioned into three-dimensional forms featuring funnel-like, cylindrical or spherical shapes.

FEATURES •

Discrete, elegant and flexible.

•

Multifunctional, and compatible with creative architecture.

•

Quality 316 Stainless Steel, rugged, weather-resistant, and corrosion resistant.

Available to order

APPLICATIONS •

Balustrades & Staircases

•

3D structures

•

Screens

•

Suspended ceilings

•

Fences

•

Zoo cages

•

Safety net on bridges or buildings

•

Partitioning walls

•

Partitioning for staircases

to view the full webnet product range please visit www.anzor.co.nz/webnet NB: please ensure use meets NZ Building Standards. Photos may be of international projects and may not adhere to standards.

Online catalogue and gallery www.anzor.co.nz/webnet

-0150-060

1,5

60 × 106

-0150-080

1,5

80 × 141

-0150-100

1,5

100 × 175

-0200-060

2,0

60 × 106

-0200-080

2,0

80 × 141

-0200-100 WEBNET

2,0

100 × 175

-0200-120

2,0

120 × 209

-0300-060

3,0

60 × 106

-0300-080

3,0

80 × 141

-0300-100

3,0

100 × 175

-0300-120

3,0

120 × 209

-0300-140

3,0

webnet BY JAKOB - 360° MESH Angle 140 × 244 4 Wire Ø (mm)

Mesh Aperture W x H (mm)

Wire Ø (mm)

Mesh Aperture W x H (mm)

1.0

20 x 38.2

2.0

40 x 75.1

1.0

25 x 46

2.0

50 x 90.5

1.0

30 x 53

2.0

60 x 106

1.0

40 x 70.5

2.0

70 x 124

1.0

50 x 87.2

2.0

80 x 141

1.0

60 x 105

2.0

100 x 175

1.0

70 x 122

2.0

120 x 209

1.0

80 x 139

2.0

140 x 244

1.5

25 x 55.9

2.0

160 x 279

1.5

30 x 61.6

2.0

180 x 313

1.5

40 x 75

3.0

40 x 74.8

1.5

50 x 90

3.0

50 x 90.5

1.5

60 x 106

3.0

60 x 106

1.5

70 x 124.2

3.0

70 x 124

1.5

80 x 141

3.0

80 x 141

1.5

100 x 175

3.0

100 x 175

1.5

120 x 209

3.0

120 x 209

1.5

140 x 244

3.0

140 x 244

3.0

160 x 279

3.0

180 x 313

Tin-plated copper sleeve: code: 20255 1.5 160 x 279 • The above table lists all Webnet samples that are available off 316 stainless steel sleeve: code: 20256 1.5 x 313 price the shelf. The prices are also indicated on the 180 Webnet

momentum to a sales discussion. y important feature of the Websamples can be very helpful.

list in the Info Box. • Needless to say, we will also provide custom Webnet samples in all shapes and sizes. October 2008

08.09.2008

Technical data subject to change

Online catalogue and gallery www.anzor.co.nz/webnet

WEBNET

Online catalogue and gallery www.anzor.co.nz/webnet

glass clamps for balustrading

DIVIDER INSERT HERE:

glass clamps for balustrading

GLASS CLAMPS FOR BALUSTRADING

Anzor Glass Clamps for Balustrading Anzor Architectural has a range of quality glass clamps to enhance your glass balustrading designs.

Anzor 22 D-Shaped page 62

ANZOR 23 Square Shaped page 62

Anzor Stand-off Top Hat page 65

ANZOR Stand-off With Countersunk Screw Page 65

PS1 Available on request - for more information visit www.anzor.co.nz/arch/producer-statements

Online catalogue: www.anzor.co.nz/glass-clamps www.anzor.co.nz/arch

ANZOR 22 & 23 GLASS CLAMPS

anzor 22 D-Shaped

anzor 23

Square Shaped

EX- STOCK SUB JEC T TO PRIOR SALE

GLASS SIZE: 8mm, 10mm, 12mm glass (specific clamps for each glass size). FOR TUBE SIZES: 1-½” tube, 2” tube, and flat or square section. FINISH: Mirror (for coastal environments) or Satin.

BENEFITS - Developed in conjunction with leading NZ glass companies.

RESEARCHED

PRODUCER STATEMENT - Clamps have been tested with Producer Statements available. QUALITY MATERIALS

- 316 Stainless Steel (test certificates available - request before purchase). - The stainless steel is passivated to improve corrosion resistance. - Safety pins are Nylon, to avoid shattering glass. - Rubber seals are EPDM, offering higher U.V. resistance.

STRENGTH CERTIFICATES - Available for pull-apart load. SAFETY PINS

- Positioned so that the distance from the edge of the glass to the edge of the

glass safety pin hole is at least double the thickness of the glass. Made - Made of Nylon to reduce the chance of the glass breaking.

CLEANING

- Glass Clamps require regular cleaning. Anzor recommends applying Prolan to reduce the chance of tea staining. See p.21 for further details.

PS1 Available on request - for more information visit www.anzor.co.nz/arch/producer-statements

Online catalogue: www.anzor.co.nz/glass-clamps www.anzor.co.nz/arch

ANZOR 22 & 23 INSTALLATION

ANZOR 22 & 23 INSTALLATION Full drawings in Producer Statement, available on request. POST SPACING - Between 1.9m-3.8m - refer to table below

Posts designed by others

1100mm MAXIMUM

800mm Max. Clamp Spacing

1200mm max - height to top of glass

MAXIMUM = 150mm, OR desired clamp spacing divided by 4, whichever is the least.

Glass Panel Complying with AS 1288

MAXIMUM = 150mm, OR desired clamp spacing divided by 4, whichever is the least.

Date drawn: 22-9-10

INSTALLATION: Use the Anzor Allen Key to install and avoid iron contamination.

REQUIRES:

M8 x 20 316 Small Head Capscrew Product code: SSHCM608020GC

installed into an M8 SS Threaded Insert - flanged. Product code: NSSFM08S

Notes to drawing The Anzor Glass Clamps M10 and M12 (22 and 23) can be used for the post spacings in the table below and the clamp spacing’s shown in the above drawing for a maximum wind speed of 50 m/s (“very high” wind as per NZS 3604). This drawing does not consider: • The design of the glass panel itself (this must be in accordance with NZS 4223 or as specifically designed by others. • The design of the posts or their supports.

Load Category

Max post spacing based on Glass Clamp capacity only

A,B,C3 AND E 0.75 kN/m to top edge 0.6 kN conc load 1 kPa unifoRm face load

3.8m

C1, C2 AND D 1.5 kN/m to top edge 1.5 kN conc load 1.5 kPa unifoRm face load (NOT SUBJECT TO OVER CROWDING)

1.9m

Contractor: Metalmorphic, Wellington.

Online catalogue: www.anzor.co.nz/glass-clamps www.anzor.co.nz/arch

ANZOR 22 & 23 SPECIFICATIONS MATERIAL: 316 Stainless Steel, Passivated for improved corrosion resistance. FINISH: Satin or Mirror (for more corrosive environments). FOR GLASS SIZES: 8mm, 10mm, and 12mm. FOR TUBE SIZES: 1-½” or 2” or Flat/Square Tube (NB: 1-1/2” not available in 12mm). BENEFITS: Quality materials, reasonably priced, Producer Statement available on request.

ANZOR 23 - CLAMPS TO FASTEN GLASS TO ROUND TUBE

ANZOR 23 - CLAMPS TO FASTEN GLASS TO SQUARE TUBE

FIXING TO TUBE: M8 x 20 316 small head capscrew. 62 fo

Product code: SSHCM608020GC

10mm 12mm

Tube

Glass Thickness 8mm

10mm

AAGC122310Q

1-½”

AAGC12230838

AAGC12231038

AAGC122312Q

2”

AAGC12230851

AAGC12231051

AAGC122308Q

28 67

Glass Thickness 8mm

55 (8/10mm) 67 (12mm)

Ø6

12mm

Ø6

8mm & 10mm

Product code: NSSFM08S

Ø6

Ø8.2

55 2mm

installed into an M8 SS threaded insert - flanged.

Ø8.2

12mm AAGC12231251

ANZOR 22 - CLAMPS TO FASTEN GLASS TO ROUND TUBE

ANZOR 22 - CLAMPS TO FASTEN GLASS TO SQUARE TUBE FIXING TO TUBE: M8 x 20 316 small head capscrew. Product code: SSHCM608020GC

33.5 63

Glass Thickness 8mm

10mm

AAGC12220838

AAGC12221038

AAGC12220851

AAGC12221051

10mm

AAGC122210Q

12mm

AAGC122212Q

2”

33.5 63

12mm AAGC12221251

Online catalogue: www.anzor.co.nz/glass-clamps www.anzor.co.nz/arch

For Tube 1-½”

Ø6

12mm 11

25 for 12mm

33.5 63

AAGC122208Q

Ø6 23

8mm & 10mm

Glass Thickness 8mm

Ø8.2

Product code: NSSFM08

Ø6

installed into an M8 SS threaded insert - flanged.

Ø8.2

STAND-OFF GLASS CLAMPS

ANZOR stand-off glass clamps - standard or custom-made available

Anzor Stand-off Top Hat STOCK

EXSUB JEC T TO PRIOR SALE

CUSTOM CLAMPS 50mm

We can customise the clampâ&#x20AC;&#x2122;s dimensions to your requirements. Longer stand off? Only need the front face? CONTACT US TODAY!

Product Code: AGCAD050THE

25mm

12mm

MATERIAL: 316 Stainless Steel FINISH: Electropolish - offering increased corrosion resistance. FIXING MATERIALS: Timber, Steel & Concrete. Includes 2x Nylon washers installation fasteners sold separately. Producer Statement for standard sizes: PS1 available on request for further info visit www.anzor.co.nz/arch/producer-statements

ANZOR Stand-off With Csk Screw EX- STOCK SUB JEC T TO PRIOR SALE

50mm

Product Code: AGCAD050E

30mm

Custom options

AVAIL ABLE ON REQUES T

6mm

Online catalogue: www.anzor.co.nz/glass-clamps www.anzor.co.nz/arch

STAND-OFF INSTALLATION

Stand-off INSTALLATION Full drawings in Producer Statement - available on request.

1100mm

GLASS PANEL BY OTHERS COMPLYING WITH NZS 4223

400mm Typ.

50mm min 100 max.

(130mm For Lagscrews to Timber)

DECK LEVEL

50mm 100mm min.

50mm min. EDGE DIST

Minimum 3/ pair of fixings per glass panel

Notes to drawing •

The fixings shown can be used with the above baluster dimensions for the following loads. Live loads for building occupancy categories A, B, E and C3 as per AS/NZS 1170.1:2002 Top edge loadings up to 0.75kN/m (horizontal & vertical) and 0.6kN (concentrated). Infill up to 1.0kPa (horizontal) and 0.5kN (concentrated). Wind Loads - `very high’ wind speed 50 m/s MAXIMUM as to NZS 3604: 1999.

Internal Stand-Off Glass Balustrade by Bay Trenz Ltd - Mt Maunganui

•

Glass balustrade to be designed by others as to . NZS 4223.

•

This design only considers the allowable capacity of the associated Anzor fixings. The drawings and the design does not include the deck structure capacity to resist rotation and will need to be designed using the appropriate standards.

•

All fixings to be stainless steel.

Online catalogue: www.anzor.co.nz/glass-clamps www.anzor.co.nz/arch

STAND-OFF INSTALLATION

Stand-off INSTALLATION Stand-Off Glass Clamps can be fixed to timber decking, steel framing, and concrete decking fixing to Timber Decking WITH Lagscrews

fixing to Timber Decking WITH StudS Glass by others.

Timber Decking Max Thickness of 35mm check on site

30 min

Nylon Bush

Anzor Stand-Off Glass Clamp.

50 min

Glass by others.

Timber Decking Max thickness of 35mm check on site

30 min

Nylon Bush

Anzor Stand-Off Glass Clamp.

M10 Threaded Stud

50 min

To suit Stand-Off connector.

Spacing 400mm max

100 min

M10 Lagscrew

100 min

Spacing 130mm max.

50 x 50 x 3mm Washer&Nut

40 min

Washers on either side of glass.

90 min

Edge timber and fixings to prevent rotation by others.

Washers on either side of glass.

fixing to steel framing Glass by others.

30 min

Nylon Bush

90 min

Edge timber and fixings to prevent rotation by others.

fixing to Concrete Decking

Timber Decking Max thickness of 35mm check on site

Glass by others.

30 min

Nylon Bush

M10 Threaded Stud drilled 80mm min. into concrete flooring and epoxied with Fischer FIS V Injection System or similar See p.132 for Fischer range. Spacings Sh = 400mm max. Edge

distances to comply with manufacturerâ&#x20AC;&#x2122;s recommendations.

Anzor Stand-Off Glass Clamp.

50 min

100 min

M10 Stud Spacing 400mm max.

Anzor Stand-Off Glass Clamp.

60 min

100 min

See above for more details.

60 min

Washers on either side of glass.

Nut

Steel Edge Beam, designed by others.

Washers on either side of glass.

Concrete decking designed by others.

Online catalogue: www.anzor.co.nz/glass-clamps Photos by Bay Trenz Ltd - Mt Maunganui

M10 Threaded Stud

handrail fittings

DIVIDER INSERT HERE:

handrail fittings

HANDRAIL TUBE CONNECTORS

HANDRAIL TUBE CONNECTORS Anzor has an extensive range of 316 stainless steel tube fittings to suit your internal and external handrail needs. Material: 316 Stainless Steel

90 DEGREE BEND FOR 2” TUBE

Product Code: AHRB90051

135 DEGREE BEND FOR 2” TUBE

EX-STOCK SUB JECT TO PRIOR SALE

FINISH: Polished

90 DEGREE ELBOW FOR 2” TUBE

Product Code: AHRE051

ADJUSTABLE HANDRAIL ELBOW FOR 2” TUBE

Product Code: AHRE051A Product Code: AHRB135

3 WAY TEE FOR 2” TUBE

TEE FOR 2” TUBE

Product Code: AHRT3W051

Product Code: AHRT051

Online catalogue: www.anzor.co.nz/handrail-fittings

HANDRAIL TUBE CONNECTORS

TUBE JOINER FOR 2” TUBE

CROSS MOUNTING FOR 2” TUBE

Product Code: AHRTJ051

Product Code: AHRCR051

OVAL BASE PLATE FOR 2” TUBE

TUBE BASE PLATE FOR 2” TUBE

Product Code: AHRTBPO051

Product Code: AHRTBP051

DOME CAP

FLAT CAP

1-1/2” Tube: Mirror Finish - AHRCD038M

1-1/2” Tube: Mirror Finish - AHRCF038M

1-1/2” Tube: Satin Finish - AHRCD038S

1-1/2” Tube: Satin Finish - AHRCF038S

2” Tube: Mirror Finish - AHRCD051M

2” Tube: Mirror Finish - AHRCF051M

2” Tube: Satin Finish - AHRCD051S

2” Tube: Satin Finish - AHRCF051S

Online catalogue: www.anzor.co.nz/handrail-fittings

HANDRAIL SUPPORT FITTINGS

HANDRAIL SUPPORT FITTINGS Anzor’s selection of handrail supports come in 304 or 316 stainless steel, for securing handrails to stainless steel tube, wood and glass.

EX-STOCK SUB JECT TO PRIOR SALE

Handrail Support Fittings - Welded HANDRAIL WALL SUPPORT UNIVERSAL 90° - 70mm dia. base

Finish - Polished Product code: AHRSU 304 Stainless Steel

HANDRAIL WALL SUPPORT UNIVERSAL 90° - 54mm dia. base

Finish - Satin and Mirror Product code: AHRSU6S or AHRSU6M 316 Stainless Steel

HANDRAIL WALL SUPPORT UNIVERSAL 90° + TOP CAP

Finish - Polished 304 Stainless Steel

HANDRAIL WALL SUPPORT UNIVERSAL STRAIGHT - 70mm dia. base

HANDRAIL WALL SUPPORT UNIVERSAL STRAIGHT + TOP CAP

Finish - Polished

Product code: AHRSS

304 Stainless Steel

Online catalogue: www.anzor.co.nz/handrail-fittings

HANDRAIL SUPPORT FITTINGS

Handrail Support Fittings - Fastened HANDRAIL WALL SUPPORT STRAIGHT WITH SADDLE - 2” TUBE

HANDRAIL WALL SUPPORT 1-1/2” & 2” TUBE

Finish - Satin

Finish - Satin & Mirror

304 Stainless Steel

Product code: AHRS0 316 Stainless Steel

HANDRAIL WALL SUPPORT SQUARE TUBE OR TIMBER

HANDRAIL WALL SUPPORT 2” TUBE - WOODSCREW THREAD

Finish - Satin & Mirror

Product code: AHRSFS & AHRSF

Product code: AHRSWO51S & AHROSW051M

316 Stainless Steel

Handrail Support Fittings - Fastened to Glass HANDRAIL GLASS SUPPORT TO TUBE - due early 2012 Countersunk

Top Hat

PVC/Nylon spacer

Actually Black EPDM Washers.

Product code: AHRSGCM

Product code: AHRSGTM

Finish - Electropolished - offering increased corrosion resistance.

316 Stainless Steel

Online catalogue: www.anzor.co.nz/handrail-fittings www.anzor.co.nz/arch

tension rod systems

DIVIDER INSERT HERE:

Tension Rod Systems

TENSION ROD SYSTEMS

TENSION ROD SYSTEMS rod dynamic `HIDDEN THREADâ&#x20AC;&#x2122; - STAINLESS Steel

Page 78

This is our standard stainless steel Tension Rod System.

coupling plates - STAINLESS Steel

Page 83

P2H Adjuster & ROD - STAINLESS Steel

Page 85

SRS-560 high tensile adjuster & high tensile rod - Stainless steel

Page 87

fork + ROD tension system - galvaniZed

Page 89

Online catalogue: www.anzor.co.nz/tension-rod www.anzor.co.nz/arch Information used exclusively under permission of Strudyna Co. Ltd

ROD DYNAMIC `HIDDEN THREADSâ&#x20AC;&#x2122;

Subway - Lunn Ave, Auckland Rod Bracing Canopy Contractor: J & R Slecht Ltd

Sovereign House - Smales Farm, Auckland Rod Bracing for Sun Screen Contractor: Thermosash Commercial Ltd BNZ Tower - Wellington Internal Rod Supports for Bridges Contractor: Thermosash Commercial Ltd

New Lynn Railway Station - Auckland Internal Structure Support Contractor: Grayson Engineering Ltd

Online catalogue: www.anzor.co.nz/tension-rod

ROD DYNAMIC `HIDDEN THREADS’

EX-STOCK SUBJECT TO PRIOR SALE

ROD DYNAMIC `HIDDEN THREAD’ stainless steel tie rods RH

Adjust by turning the rod only.

ADJUSTABLE FORK - (RH)

SPANNER FLATS

ADJUSTABLE FORK (LH)

RH ROD JOINER

ADJUSTABLE EYE (RH)

Adjust by turning the extended tension rod and joiner as one single unit.

ADJUSTABLE EYE (LH)

Locking nut covers threads

FEATURES & BENEFITS • Attractive look as the threads are hidden by the locking nut. • Exposed threads can commonly trap corrosive agents (e.g. salt) and therefore tea-stain more easily. By covering the threads it removes this risk and enhances the long-term appearance.

• Fork and Eye terminals are made from 316 Stainless Steel which is then passivated for enhanced corrosion resistance. These are made by the highly reputable manufacturer of structural stainless steel components `Structural Dynamics’.

• • • •

Fork and Eye terminals each have a laser engraved code for traceability from raw material. The Tie Rods are 316 Stainless Steel. UNF threads allow for more precise adjustment. Fully tested with Tensile & Yield loads available.

WHY SPECIFY? • We have excellent stock levels of all fittings in New Zealand, so our delivery is quick. • Rod length is customised to the job - machined locally to order with a short delivery time. • Competitively priced. • We are proven in New Zealand, and are the preferred supplier to many structural steel companies, having supplied many projects nationwide.

Online catalogue: www.anzor.co.nz/tension-rod www.anzor.co.nz/arch Information used exclusively under permission of Strudyna Co. Ltd

rod dynamic `HIDDEN THREADS’

ADJUSTABLE FORKS

- left (S912L) & Right hand (S912R) L

Product Code: ASDS912

TY S M ALL Q R TO O R D E

appr ox D eliver y 2- 3 wee ks

y large qt R E D R O TO

appr ox D eliver y 2 months

EX-STOCK SUBJECT TO PRIOR SALE

Size M UNF

ØD

(mm)

Adjustment (+/-)

Yield Load* (kN)

Tensile Load (kN)

1/4” UNF

6.4

68.5

15mm

7.0

14.6

5/16” UNF

8.5

13.2

7.9

16mm

11.6

23.3

3/8” UNF

9.5

19mm

12.9

30.6

1/2” UNF

12.7

137

30mm

24.6

58.2

5/8” UNF

170

35mm

33.8

85.0

3/4” UNF

212

45mm

49.4

124.1

7/8” UNF

244

50mm

67.2

168.9

1” UNF

25.5

282

60mm

87.7

220.4

1-1/4” UNF

31.8

330

65mm

141.9

356.4

Size M Metric

ØD

(mm)

Adjustment (+/-)

Yield Load* (kN)

Tensile Load (kN)

M27x3.0

264.9

54mm

120.0

236.0

M30x3.5

294.2

60mm

147.0

288.0

M33x3.5

321.6

66mm

181.0

357.0

M36x4.0

350

72mm

214.0

420.0

M39x4.0

378

78mm

255.0

502.0

M42x4.5

408

84mm

293.0

577.0

M45x4.5

432.7

90mm

342.0

672.0

M48x5.0

460

96mm

385.0

758.0

M52x5.0

498.1

104mm

460.0

905.0

M56x5.5

530.9

112mm

531.0

1,045.0

*Standard safety factor for structural tensile application is 60% of yield load. Also see your obligations regarding Safe Working Loads on p.105. NB: never use rod for lifting purposes.

Loctite 243

ROD LENGTHS Rod made to order up to approx. 6m. Please supply the pin-to-pin measurement.

We recommend applying Loctite 243 to the pin, washer & screw set for permanent fixture.

Threads must be lubricated with NICKEL ANTI SEIZE TO AVOID GALLING.

Online catalogue: www.anzor.co.nz/tension-rod Information used exclusively under permission of Strudyna Co. Ltd

ROD DYNAMIC `HIDDEN THREADS’

ADJUSTABLE EYES

EX-STOCK SUBJECT TO PRIOR SALE

- left (S911L) & Right hand (S911R) L

Product Code: ASDS911

Size

ØD

(mm)

Adjustment (+/-)

Yield Load* (kN)

Tensile Load (kN)

1/4” UNF

6.7

68.5

15mm

7.0

14.6

5/16” UNF

13.2

8.3

16mm

11.6

23.3

3/8” UNF

9.8

19mm

12.9

30.6

1/2” UNF

137

30mm

24.6

58.2

5/8” UNF

16.2

170

35mm

33.8

85.0

3/4” UNF

19.5

212

45mm

49.4

124.1

7/8” UNF

22.5

244

50mm

67.2

168.9

1” UNF

25.7

282

60mm

87.7

220.4

1-1/4” UNF

330

65mm

141.9

356.4

*Standard safety factor for structural tensile application is 60% of yield load. Also see your obligations regarding Safe Working Loads on p.105. NB: never use rod for lifting purposes.

For installation guide and technical specifications please contact us or visit www.anzor.co.nz/arch/tension-rod Also Available

curtain RDS curtain wall joiner wallwith with joiner movable with movable articulation articulation RDSRDS curtain wall joiner movable articulation

ROD LENGTHS Rod made to order up to approx. 6m. Please supply the pin-to-pin measurement.

RDS curtain wall with fixed articulation RDS curtain RDS curtain wall joiner walljoiner with joiner fixed with articulation fixed articulation

Threads must be lubricated with NICKEL ANTI SEIZE TO AVOID GALLING.

Online catalogue: www.anzor.co.nz/tension-rod Information used exclusively under permission of Strudyna Co. Ltd

ROD DYNAMIC `HIDDEN THREADS’

ROD JOINER

EX- STOCK SUB JEC T TO PRIOR SALE

to connect rods for lengths beyond 6 metres

Size (M)

L (mm)

1/4” UNF

5/16” UNF

3/8” UNF

1/2” UNF

5/8” UNF

3/4” UNF

7/8” UNF

1” UNF

1-1/4” UNF

112

PIN, WASHER & SCREW DIMENIONS Size (M)

Ø6.4

14mm

5/16” UNF

Ø7.9

17.5mm

3/8” UNF

Ø9.5

19.5mm

1/2” UNF

Ø12.7

26.4mm

5/8” UNF

Ø16

34.5mm

Loctite 243

3/4” UNF

Ø19

41.5mm

We recommend applying Loctite 243 to the pin, washer & screw set for permanent fixture.

7/8” UNF

Ø22

46.5mm

1” UNF

Ø25.5

54.5mm

1-1/4” UNF

Ø31.8

65mm

1/4” UNF

ISOLATING WASHER

EX- STOCK SUB JEC T TO PRIOR SALE

To be used to separate dissimilar metals such as when attaching a stainless steel adjustable fork to a mild steel galvanized bracket. Thereby avoiding galvanic corrosion between dissimilar metals. Size

ØD1 (mm)

ØD2 (mm)

ØD3 (mm)

ØT1 (mm)

ØT2 (mm)

1/4”

9.0

7.0

4.5

6.5

5/16”

10.5

8.5

6.0

8.0

3/8”

12.0

10.0

7.5

9.5

1/2”

15.5

13.5

11.5

13.5

5/8”

20.5

16.5

15.0

17.0

3/4”

23.5

19.5

19.0

21.0

7/8”

27.0

23.0

19.0

23.0

1”

30.5

26.5

21.0

25.0

1.1/4”

37.0

33.0

27.0

31.0

Online catalogue: www.anzor.co.nz/tension-rod Information used exclusively under permission of Strudyna Co. Ltd

COUPLING PLATES

ROD DYNAMIC TIE BACK PLATES - 316 STAINLESS STEEL Always install rods and brackets in line.

SCA1 LE AVAIL AB R TO O R D E

appr ox Deliver y 2 wee ks

Size

SCB1 - Bolt Anchor

Designed for J Bolts directly onto steel beam. EX-STOCK SUB JEC T TO PRIO R SALE

(mm)

1/4”

9.5

20-60

5/16”

11.0

25-75

3/8”

12.5

30-70

1/2”

16.5

40-100

5/8”

21.0

50-110

3/4”

24.0

60-120

7/8”

28.0

60-140

Welded Application

Welding coupling plates. SCA1 are designed to be cut and welded on site.

ØD

(mm)

1”

31.5

75-155

1-1/4”

38.0

105

85-185

SCD1 - Chemical Bolt Anchor Designed for chemical anchors directly onto concrete. EX-STOCK SUB JEC T TO PRIO R SALE

SCC1- Chemical Bolt Anchor Designed for chemical anchors directly onto cement. EX-STOCK SUB JEC T TO PRIO R SALE

Product code: ASDCPB1

Product code: ASDCPD1

Angles available ex-stock: 60° Available to order: 45,50,55,65,70,75,80,85,90°

Angles available ex-stock: 90° Available to order: 30,40,45,50,55,60,65,70,75

Product code: ASDCPC1

Angles available ex-stock: 45°

NB: Breaking Loads for SCB1, SCD1 & SCC1 are indicative of coupling’s plate tensile performance against rod assemblies, and not the anchoring strength of bolts against wall/floor.

For full dimensions, please contact us or visit

www.anzor.co.nz/arch

Online catalogue: www.anzor.co.nz/tension-rod www.anzor.co.nz/arch Information used exclusively under permission of Strudyna Co. Ltd

COUPLING PLATES

COUPLING PLATES - 316 STAINLESS STEEL

appr ox D eliver y 2 wee ks

6.7

5/16”

8.2

3/8”

9.8

115

13.3

5/8”

140

16.5

3/4”

170

20.0

7/8”

190

23.0

1”

220

26.0

1-1/4”

260

33.0

D D1

° 80°

12 0°

D1 0°

0°

120°

Angles available: 120° Size

D D1

D1 D1 D

SCG1

120°120°

D D

D D1

85°

0°

0° 12

45°

D °

70 °

D D1

D1 D D1

80°

75°

40°

D D1

D1 D

D D1

70°

65°

50°

45°

40°

50°

50° 50°

45°

40°

60°

55°

45° 45°

40° 40°

D D1

90 °

12 16

1/2”

D D1

1/4”

D D1

° 90

50°

(mm)

90 ° 90 ° D1

D D1

45°

40°

(mm)

Angles available: 40,45,50,55,60,65,70,75,80,85,90 D1

(mm)

D1 D1

D D1

ØD1

ØD

Size

90°

SCF1

For Cross Bracing

LE AVAIL AB R TO O R D E

ØD

(mm)

ØD1

(mm)

1/4”

6.7

5/16”

8.2

3/8”

9.8

1/2”

115

13.3

5/8”

140

16.5

3/4”

170

20.0

7/8”

190

23.0

1”

220

26.0

1-1/4”

260

33.0

Online catalogue: www.anzor.co.nz/tension-rod Information used exclusively under permission of Strudyna Co. Ltd

P2 H ADJUSTER

P2H ADJUSTER - ARCHITECTURALLY DESIGNED Stainless steel TERMINALS FOR TIE RODS LE AVAIL AB R E D R O TO x

appro D eliver y 4 months

Adjust by turning the “In-Socket” only.

P2H - Fork Lock Nut for In-Socket

A `HIGH END’ ARCHITECTURALLY DESIGNED ROD ADJUSTER. •

A high quality tensioning unit for rod (and cable – see p.101).

•

Designed for performance and also aesthetic appeal.

•

Due to its unique internal adjustment system, it can be adjusted individually by turning just one adjuster end, without having to turn the entire rod.

•

The double locking nut system offers good security to counter external dynamic and resonance forces.

•

Threads are hidden for enhanced aesthetic appeal.

PIN Lock Nut for Ex-socket

P2H Adjuster Technical Features •

Rod diameter: Metric M16 – M56.

•

Made from passivated 316 Stainless Steel for enhanced corrosion resistance.

•

Finish: Matt

•

Installation - special P2H tools required.

Threads must be lubricated with NICKEL ANTI SEIZE TO PREVENT GALLING

Information used exclusively under permission of Strudyna Co. Ltd

P 2 H ADJUSTER

P2H ADJUSTER - performance data P2H (Fork)

P2H (Fork)

ØD A

Pin-to-Pin Middle adjustment

Rod Size (Ø)

A (mm)

ØD (mm)

Adjustment +/-

Yield Load* (kN)

Tensile Load (kN)

M16

40mm

M20

40mm

132

M22

40mm

163

M24

56mm

100

197

M27

56mm

126

254

M33

60mm

199

391

M42

64mm

314

620

M45

64mm

365

718

M52

70mm

485

978

M56

80mm

514

1,143

*Standard safety factor for structural tensile application is 60% of yield load. Also see your obligations regarding Safe Working Loads on p.105. NB: never use rod for lifting purposes.

For installation guide, tools and technical specifications please contact one of our architectural product managers or visit www.anzor.co.nz/arch/p2h P2H Precautions

Loctite 243 We recommend applying Loctite 243 to the pin, washer & screw set for permanent fixture.

•

Always select the correct rod system based on load requirements.

•

Do not overload the rod above its designed safe working load.

•

Always use the P2H Adjuster in line with its anchoring point.

•

Never use the P2H adjuster for lifting purposes.

Threads must be lubricated with NICKEL ANTI SEIZE To PREVENT GALLING

Online catalogue: www.anzor.co.nz/tension-rod Information used exclusively under permission of Strudyna Co. Ltd

SRS - HIGH TENSILE STAINLESS ROD

LE AVAIL AB R E D TO O R

SRS-560HTR - HIGH TENSILE Stainless steel ROD SYSTEM

approx D eliver y 4 months

LH Adjust by turning the rod only.

FEATURES SRS Fork

• High tensile Stainless Steel Rod Tension System. • Designed for performance and also aesthetic appeal. • Threads are hidden for enhanced aesthetic appeal.

• Full traceability - rods and tensioners each come with laser engraved codes.

SRS Technical Features •

Rod Diameter: Metric M16 – M100.

•

Fork Material: Cast 2205 Duplex Stainless Steel

•

Rod Material: 560HTR Grade High Tensile Stainless Steel

•

Lock Nut Material: Cast AISI316

•

Pin Material: Rod 17-4 PH Stainless Steel

•

Threads must be lubricated with NICKEL ANTI SEIZE To PREVENT GALLING Information used exclusively under permission of Strudyna Co. Ltd

Online catalogue: www.anzor.co.nz/tension-rod www.anzor.co.nz/arch

SRS - HIGH TENSILE STAINLESS ROD

SRS PERFORMANCE DATA SRS (fork)

SRS (fork)

560HTR Rod

ØD

Ø Rod

min

max

Pin to Pin Pin-to-Pin Middle adjustment

Middle adjustment Rod Size (Ø)

A (mm)

ØD (mm)

Adjustment +/-

Yield Load* (kN)

Tensile Load (kN)

M16

32mm

109

137

M20

40mm

171

214

M22

44mm

169

243

M24

48mm

197

283

M30

46mm

288

364

M33

50mm

357

451

M36

54mm

420

531

M39

60mm

502

634

M42

64mm

577

728

M45

68mm

672

848

M48

72mm

758

957

M52

78mm

905

1,142

M56

84mm

933

1,258

M60

70mm

1,086

1,464

M64

60mm

1,231

1,659

M68

60mm

1,405

1,894

M72

60mm

1,593

2,147

M76

50mm

1,788

2,411

M80

50mm

1,998

2,693

M85

50mm

2,275

3,067

M90

50mm

2,571

3,465

M100

100

50mm

3,220

4,340

*Design load: standard safety factor for structural tensile application is 60% of yield load. Also see your obligations regarding Safe Working Loads on p.105. NB: never use rod for lifting purposes.

Accessories

LE AVAIL AB R E D R O TO x appro D eliver y 4 months

RDS curtain wall joiner with movable articulation

RDS curtain wall joiner with fixed articulation

SRS 560HTR with 4 way connector plate. SRS 560HTR with a perpendicular T-Joiner.

SRS 560HTR with 3 way connector plate.

Online catalogue: www.anzor.co.nz/tension-rod Information used exclusively under permission of Strudyna Co. Ltd

GALVANIZED ROD SYSTEM

galvanized fork + rod TENSION system • Produced by a high quality European manufacturer. • Supplied to thousands of projects worldwide. • Designed for performance and also aesthetic appeal. • An economical, high quality choice for your next rod tensioning project. Galv Fork

Galv Fork

Rod Joiner (sold separately)

ØD

Galv Rod

Locking Nut

Ø Rod NB: illustrations are not an exact representation of the product. Please contact us for technical drawings.

available to order Delivery times:

Pin-to-Pin Middle adjustment

Rod Size (Ø)

A (mm)

ØD (mm)

Adjustment +/- (mm)

Yield Load (kN)

M10

26.3

M12

38.3

Small Orders

M16

71.2

Fork size M24 and smaller and a quantity of up to 10 rods. Delivery approx 10 working days

M20

111.0

M24

160.0

M27

208.0

M30

254.0

LARGE Orders

M36

371.0

Size and qty on application.

M42

509.0

Please contact us for estimated delivery times.

M48

669.0

M52

798.0

M56

922.0

M60

1,073.0

M64

1,215.0

M70

101

1,463.0

M80

116

1,910.0

M90

128

2,418.0

M100

141

2,985.0

Rod Joiners

Available on request. (sold separately)

ØD = the hole diameter in the fork that accommodates the clevis pin

Yield Stress of 460 N/mm2 equal to 460 MPa For full technical specifications & installation guide please contact one of our architectural product managers.

Online catalogue: www.anzor.co.nz/tension-rod

DIVIDER INSERT HERE:

wire rigging systems

HAMMA PRO-STRAND

Online catalogue: www.anzor.co.nz/wire-rigging www.anzor.co.nz/arch

• Economical option. • Application: a wide variety of applications including horizontal wire, roof plane (criss cross bracing), and hanging vertically applications. with Micro-stretch Technologies.

1x7

1x19

Wire Rope in 316 or 316 Ultra: page 104

Strudyna is proud to offer Hamma cables as part of Strudyna's tensile cable systems. Hamma cables are develope d exclusivel y for high tensile performances through unique techniques that differentiate from other manufactures. Hamma cables start with the highest quality of 1x19 7x7 7x19 stainless steel source follow by unique descaling of stainless steel rod to remove impurities, which may have attached during transport, prior to commencing production.

Benefits

Types Material Sizes Finish

- Built with Micro Stretch Technology (MST), the Minimum Breaking Strength (MBS) is 20-30% higher than conventional 1x19 wire of the same size. This means that you can downsize the structural cable and maintain the strength. This results in improved aesthetics, less weight in the structure, and cost savings on smaller fittings, which can be significant on large projects.

: : : :

Compact wire strand in constructions 1x7, 1x19, 1x25 316 Stainless Steel 1.6mm - 12mm Bright and smooth for increased corrosion resistance.

• Wire types: Anzor 316 wire. • Wire types: 1x19, 7x7, 7x19.

Application: Predominantly used for structural cables, e.g glass facades

• Wire sizes: 3mm - 6mm.

Specific features: - Extremely non-flexible. - High breaking strain. - Extremely low stretch.

High tensile rods systems

- Smooth clean finish. - No pre-stress required.

S7801 LH Swage Stud: page 98

Multiple annealing stages during the drawing process to ensure wire does not work harden, and finished by passing through an ultrasonic

HAMMA X-STRAND

bath to remove any impuritie s that may have attache d during Benefits Enhanced corrosion resistance. Produced with a high level manufacture . This makesofHamma cable unique in removal raising ultimate descaling and ultrasonic of impurities. corrosion resistance for extreme harsh and severe local conditions as corrosion Resulting in longer lasting shine and ultimate resistance, better for NZ’s harsh corrosive well as increased work life due to the multiple annealing processes,conditions. ensuring longevity of the wire. Hamma cables are ensured of superior Material 316excellent Stainless Steel brightness and smooth aesthetic finish due to : an surface Sizes : 1x19 : 0.8mm 19mm (rigid),- 7x7 (semi-flexible), 7x19 (flexible) exterior.Types Types : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)

S7801 RH Swage Stud: page 98

HAMMA PRO-STRAND Finish : Bright and smooth for increased corrosion resistance. Benefits

Application: Balustrades, shade sails, foliage trellises, and architectural rigging. (MST), the Minimum Breaking - Built with Micro Stretch Technology for than exterior use in coastal Strength (MBS)Recommended is 20-30% higher conventional 1x19areas. wire of the same size. This means that you can downsize the structural cable Code: MFW...U and maintain the strength. This results in improved aesthetics, less weight in the structure, and cost savings on smaller fittings, which Maintenance: Wire rope must be cleaned & maintained regularly. can be significant on large projects. See our Maintenance & Cleaning guidelines on p.21.

Swage stud at each end

Types Material Sizes Finish

: : : :

Compact wire strand in constructions 1x7, 1x19, 1x25 316 Stainless Steel 1.6mm - 12mm Benefits - Designed for large structural projects. To date this is the largest Bright and smooth for increased corrosion stainless steel strand on the resistance. market.

HAMMA MEGA-STRAND

• Wire material: 316 or 316 Ultra. • Wire sizes: 2.5mm - 10mm.

• Swaging: hex swaged (by hand tool) or roll swaged.

• Wire types: 1x19, 7x7, 7x19.

• Application: suited for static applications e.g. flag poles, balustrades, staircases, and straight line installations.

Application: Predominantly used for structural cables, e.g glass facades Types : A conventional 1x37 and 1x61 construction wire stand. Material : 316 Stainless Steel Specific features: Sizes non-flexible. : 20mm - 42mm. High tensile rods systems - Extremely - Smooth clean finish. : Bright and smooth for increased corrosion resistance. - High Finish breaking strain. - No pre-stress required. Application: Large structural projects, such as bridges. - Extremely low stretch.

with Micro-stretch Technologies.

1x7

1x19

Specific features: - Low stretch. Strudyna is proud to offer Hamma cables as part of Strudyna's tensile Multiple annealing stages during the drawing process to ensure wire - Higher comparative breaking strain. cable systems. Hamma cables are develope d exclusivel y for high does not work harden, and finished by passing through an ultrasonic Wide cable size range. Enhanced Produced aswaging. high level tensile performances through unique techniques that differentiate from Benefits bath to - remove any impuritieresistance. s with that both may have with attache d during Compatible splicing and - corrosion of .descaling and Hamma ultrasonic removal of impurities. other1x19 manufactures. Hamma cables start with the highest quality of manufacture This makes cable unique in raising ultimate - Good corrosion resistance. 7x7 7x19 Resulting in longer lasting shine and ultimate corrosion stainless steel source follow by unique descaling of stainless steel 1x61 rod corrosion resistance for extreme harsh and severe local conditions as 1x37 resistance, better for NZ’s harsh corrosive conditions. to remove impurities, which may have attached during transport, prior to well as increased work life due to the multiple annealing processes, commencing production. ensuring: longevity of theSteel wire. Hamma cables are ensured of superior Material 316 Stainless aesthetic: finish to an excellent surface brightness and smooth Sizes 0.8mmdue - 19mm : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible) exterior.Types Types : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)

S3121P Jaw/Swage Turnbuckle to tension wire: page 96

Wire Rope in 316 or 316 Ultra: page 104

HAMMA X-STRAND

S7803 Swage Fork Terminal: page 97

with Ultimate Structural cable

Finish : Bright and smooth for increased corrosion resistance. HAMMA PRO-STRAND

Application: Balustrades, shade sails, foliage trellises, and architectural rigging. Benefits - Built with Micro Stretch Technology (MST), the Minimum Breaking Recommended for exterior use in coastal areas. Strength (MBS) is 20-30% higher than conventional 1x19 wire of the same size. This means that you can downsize the structural cable Code: MFW...U and maintain the strength. This results in improved aesthetics, less Maintenance:weight Wire in rope be cleaned & maintained themust structure, and cost savings on regularly. smaller fittings, which can be our significant on large projects. guidelines on p.21. See Maintenance & Cleaning

JAW TURNBUCKLE

HAMMA MEGA-STRAND Types Material Benefits Sizes Finish

: : -: :

Compact wire strand in constructions 1x7, 1x19, 1x25 316 Stainless Steel Designed for large structural projects. To date this is the largest 1.6mm - 12mm stainless steel strand the market. Bright and smooth foron increased corrosion resistance.

• Wire material: 316 or 316 Ultra. • Wire sizes: 2.5mm - 10mm.

• Swaging: hex swaged (by hand tool) or roll swaged.

• Wire types: 1x19, 7x7, 7x19.

• Application: suited for membrane structures or shade sails subject to dynamic forces.

Application: cables, e.g glass facades Types : Predominantly A conventional used 1x37 for andstructural 1x61 construction wire stand. Material : 316 Stainless Steel Specific features: Sizes : 20mm - 42mm. - Extremely non-flexible. - Smooth clean finish. Finish : Bright and smooth for increased corrosion resistance. - HighLarge breaking strain.projects, - such No pre-stress required. Application: structural as bridges. - Extremely low stretch. Specific features: - Low stretch. - Higher comparative breaking strain. - Wide cable size range. with both splicing and swaging. Benefits- Compatible - Enhanced corrosion resistance. Produced with a high level - Good of corrosion descaling resistance. and ultrasonic removal of impurities. Resulting in longer lasting shine and ultimate corrosion resistance, better for NZ’s harsh corrosive conditions.

with Micro-stretch Technologies.

1x7

1x19

Wire Rope in 316 or 316 Ultra: page 104

S3121/5 Toggle/Swage Turnbuckle to tension wire: page 95

S7805 Swage Toggle Terminal: page 97

HAMMA X-STRAND

with Ultimate Structural cable

+ 1x19

7x7

7x19

1x37

1x61

Material Sizes Types Finish

: : : :

316 Stainless Steel 0.8mm - 19mm 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible) Bright and smooth for increased corrosion resistance.

Application: Balustrades, shade sails, foliage trellises, and architectural rigging. Recommended for exterior use in coastal areas. Code:

toggle TURNBUCKLE

MFW...U

Maintenance:

Wire rope must be cleaned & maintained regularly. See our Maintenance & Cleaning guidelines on p.21.

WIRE RIGGING SYSTEMS

HAMMA MEGA-STRAND Benefits

- Designed for large structural projects. To date this is the largest stainless steel strand on the market.

Types : Material : Sizes : Finish : Application:

A conventional 1x37 and 1x61 construction wire stand. 316 Stainless Steel 20mm - 42mm. Bright and smooth for increased corrosion resistance. Large structural projects, such as bridges.

Specific features: - Low stretch. - Higher comparative breaking strain. - Wide cable size range. - Compatible with both splicing and swaging. - Good corrosion resistance.

WIRE RIGGING SYSTEMS with Ultimate Structural cable

1x37

1x61

Sizes Finish

: 1.6mm - 12mm : Bright and smooth for increased corrosion resistance.

Application: Predominantly used for structural cables, e.g glass facades

Online catalogue: www.anzor.co.nz/wire-rigging with Micro-stretch Technologies.

1x7

1x19

Specific features: - Extremely non-flexible. - High breaking strain. - Extremely low stretch.

- Smooth clean finish. - No pre-stress required.

HAMMA X-STRAND Benefits

1x19

7x7

7x19

- Enhanced corrosion resistance. Produced with a high level of descaling and ultrasonic removal of impurities. Resulting in longer lasting shine and ultimate corrosion resistance, better for NZ’s harsh corrosive conditions.

• Wire type: HAMMA Pro-Strand or Mega-Strand. • Installation: Wire can be tensioned from one end. Material Sizes Types Finish

: : : :

316 Stainless Steel 0.8mm - 19mm 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible) Bright and smooth for increased corrosion resistance.

• Wire material: 316 stainless steel.

• Applications: membrane structures, glass facades, structural cabling (e.g. pedestrian bridges).

• Wire sizes: 8mm - 42mm.

Application: Balustrades, shade sails, foliage trellises, and architectural rigging. Recommended for exterior use in coastal areas. Code:

HAMMA High Tensile 316 Wire - page 104

Maintenance:

Strudyna is proud to offer Hamma cables as part of Strudyna's tensile cable systems. Hamma cables are develope d exclusivel y for high tensile performances through unique techniques that differentiate from other manufactures. Hamma cables start with the highest quality of stainless steel source follow by unique descaling of stainless steel rod to remove impurities, which may have attached during transport, prior to commencing production.

High tensile rods systems

MFW...U

P2H Adjuster Unit to tension wire: page 101

Wire rope must be cleaned & maintained regularly. See our Maintenance & Cleaning guidelines on p.21.

Multiple annealing stages during the drawing process to ensure wire by passing through an ultrasonic

HAMMA MEGA-STRAND does not work harden, and finished

P2H Adjuster Unit page 101

bath to - remove anylarge impuritie s projects. that may have d during Benefits Designed for structural To date this isattache the largest stainless strandHamma on the market. manufacture . Thissteel makes cable unique in raising ultimate corrosion: resistance for1x37 extreme harsh and severe local conditions as Types A conventional and 1x61 construction wire stand. well as increased work life due to the multiple annealing processes, Material : 316 Stainless Steel Sizes 20mm - 42mm. ensuring : longevity of the wire. Hamma cables are ensured of superior Finish : Bright and smooth for increased corrosion resistance. aesthetic finish due to projects, an excellent Application: Large structural such assurface bridges. brightness and smooth exterior.Types

: 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)

Specific features: - Low stretch. - Higher comparative breaking strain. - Wide cable size range. - Compatible with both splicing and swaging.

HAMMA PRO-STRAND with Ultimate Structural cable

1x37

corrosion resistance. Benefits - Good - Built with Micro Stretch Technology (MST), the Minimum Breaking Strength (MBS) is 20-30% higher than conventional 1x19 wire of the same size. This means that you can downsize the structural cable and maintain the strength. This results in improved aesthetics, less weight in the structure, and cost savings on smaller fittings, which can be significant on large projects.

1x61

P2H Adjuster - With hamma high tensile HAMMA wire Types Material Sizes Finish

• Installation: Not for the faint of heart. Wire has to be turned simultaneously from both ends to tension.

: : : :

Compact wire strand in constructions 1x7, 1x19, 1x25 316 Stainless Steel 1.6mm - 12mm Bright and smooth for increased corrosion resistance.

Application: Predominantly used for structural cables, e.g glass facades Specific features: - Extremely non-flexible. - High breaking strain. - Extremely low stretch.

with Micro-stretch Technologies.

1x7

• Wire type: Anzor 316 wire.

• Wire material: 316 stainless steel.

• Applications: used in a criss cross formation in an bracing application.

• Wire sizes: 3mm - 8mm.

1x19

- Smooth clean finish. - No pre-stress required.

High tensile rods systems

RDS LH Adjuster Unit: page 100

Wire Rope in 316 or 316 Ultra: page 104

HAMMA X-STRAND

Strudyna is proud to offer Hamma cables as part of Strudyna's tensile cable1x19 systems. 7x7Hamma 7x19 cables are develope d exclusivel y for high tensile performances through unique techniques that differentiate from other manufactures. Hamma cables start with the highest quality of stainless steel source follow by unique descaling of stainless steel rod to remove impurities, which may have attached during transport, prior to commencing production.

Benefits - Enhanced corrosion Produced a high level Multiple annealing stages duringresistance. the drawing processwith to ensure wire of descaling and finished ultrasonic impurities. does not work harden, and by removal passing of through an ultrasonic Resulting in longer lasting ultimate corrosion bath to remove any impuritie s thatshine mayand have attache d during resistance, betterHamma for NZ’scable harshunique corrosive conditions. manufacture . This makes in raising ultimate corrosion resistance for extreme harsh and severe local conditions as Material : 316 Stainless Steel well as increased work life due to the multiple annealing processes, Sizes : 0.8mm - 19mm ensuring longevity of the7x7 wire. Hamma cables are(flexible) ensured of superior Types : 1x19 (rigid), (semi-flexible), 7x19 aesthetic : finish an excellent surfacecorrosion brightness and smooth Finish Brightdue andtosmooth for increased resistance. : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible) exterior.Types

RDS RH Adjuster Unit: page 100

Application: Balustrades, shade sails, foliage trellises, and HAMMA PRO-STRAND architectural rigging.

Recommended for exterior use in coastal areas. Benefits - Built with Micro Stretch Technology (MST), the Minimum Breaking Code: MFW...U Strength (MBS) is 20-30% higher than conventional 1x19 wire of the Maintenance:same Wire rope must be cleaned maintained size. This means that you&can downsizeregularly. the structural cable andSee maintain the strength. results in improved aesthetics, less our Maintenance & This Cleaning guidelines on p.21. weight in the structure, and cost savings on smaller fittings, which

RDS FORK + PBI SWAGE STUD be significant on large projects. HAMMAcanMEGA-STRAND

Benefits :- Compact Designedwire for large structural projects.1x7, To date is the largest Types strand in constructions 1x19,this 1x25 stainless steel strand on the market. Material : 316 Stainless Steel Sizes : 1.6mm - 12mm Types A conventional 1x37 1x61 construction wire stand. Finish :: Bright and smooth forand increased corrosion resistance. Material : 316 Stainless Steel Application: Sizes : Predominantly 20mm - 42mm.used for structural cables, e.g glass facades Finish : Bright and smooth for increased corrosion resistance. Specific features: Application: Large structural projects, such as bridges. - Extremely non-flexible. - Smooth clean finish. Specific- features: High breaking strain. - No pre-stress required. Low stretch. -- Extremely low stretch. - Higher comparative breaking strain. - Wide cable size range. - Compatible with both splicing and swaging. - Good corrosion resistance. Benefits - Enhanced corrosion resistance. Produced with a high level of descaling and ultrasonic removal of impurities. Resulting in longer lasting shine and ultimate corrosion resistance, better for NZ’s harsh corrosive conditions.

• Wire types: Anzor 316 wire.

• Application: horizontal wire, roof plane (criss cross bracing) and vertically hanging applications with the swage fork visible.

• Wire types: 1x19, 7x7, 7x19. • Wire sizes: 3mm - 6mm.

with Micro-stretch Technologies.

1x7

1x19

Wire Rope in 316 or 316 Ultra: page 104

S7801 RH Swage Stud: page 99

HAMMA X-STRAND

with Ultimate Structural cable

1x37

+ 1x19

7x7

S7803 Swage Fork Terminal: page 99

1x61

7x19

Material Sizes Types Finish

: : : :

316 Stainless Steel 0.8mm - 19mm 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible) Bright and smooth for increased corrosion resistance.

Application: Balustrades, shade sails, foliage trellises, and architectural rigging. Recommended for exterior use in coastal areas.

Swage fork terminal + SWAGE Stud Code:

MFW...U

Maintenance:

Wire rope must be cleaned & maintained regularly. See our Maintenance & Cleaning guidelines on p.21.

HAMMA MEGA-STRAND Benefits

- Designed for large structural projects. To date this is the largest stainless steel strand on the market.

Types : Material : Sizes : Finish : Application:

A conventional 1x37 and 1x61 construction wire stand. 316 Stainless Steel 20mm - 42mm. Bright and smooth for increased corrosion resistance. Large structural projects, such as bridges.

WIRE RIGGING SYSTEMS

Specific features: - Low stretch. - Higher comparative breaking strain. - Wide cable size range. - Compatible with both splicing and swaging. - Good corrosion resistance.

with Ultimate Structural cable

1x37

1x61

TOGGLE/SWAGE TURNBUCKLES

S3121/5 TOGGLE/SWAGE Turnbuckle A toggle end is the preferred choice for membrane structures as it can move in two directions.

EX-STOCK SUBJEC T TO PR IOR SALE

S3121/5 Technical Features •

Material: 316 Stainless Steel.

•

Application: suited to membrane structures subject to dynamic forces. Swaging: hex swaged (by hand tool) for 2.5, 3.0 & 4.0mm* wire, or alternatively roll swaged by a professional rigger.

•

L1 M

Wire sizes: 2.5mm - 10mm.

L OD

•

Hand tool for swaging 5.0mm wire available on request. NB: There may be a lead time.

Code

Size M (mm)

Wire Ø (mm)

L (mm)

L1 (mm)

OD (mm)

Accessory

MFTBPTSM605

2.5*

155

5.5

Ring

600

MFTBPTSM606

3.0*

172

6.3

Ring

1,000

MFTBPTSM608

4.0*

210

105

7.5

Ring

1,400

MFTBPTSM610

M10

5.0

246

125

9.1

Ring

2,200

MFTBPTSM612

M12

6.0

296

150

12.5

Ring

4,000

MFTBPTSM616

M16

8.0

386

190

16.1

Cotter pin

6,500

MFTBPTSM620

M20

10.0

422

210

17.8

Cotter pin

8,500

Breaking Load (kgs)

Safe working load - Standard safety factor for working load is 25% of Breaking Load

Online catalogue: www.anzor.co.nz/wire-rigging www.anzor.co.nz/arch Information used exclusively under permission of Strudyna Co. Ltd

JAW/SWAGE TURNBUCKLES

S3121P JAW/SWAGE Turnbuckle A jaw end is rigid and suited to `straight-line’ applications where the wire rig isn’t subject to significant external forces E.g. It is suited to flag poles, but not suited to shade sails.

EX-STOCK SUBJEC T TO PR IOR SALE

S3121/5 Technical Features

•

Wire sizes: 2.5mm - 8mm.

•

Material: 316 Stainless Steel. Application: Suited to static applications E.g. balustrades, staircases, flag poles and straight line installations. Swaging: hex swaged (by hand tool) for 2.5, 3.0 & 4.0mm* wire, or alternatively roll swaged by a professional rigger.

•

L OD

Hand tool for swaging 5.0mm wire available on request. NB: There may be a lead time.

Size M (mm)

Wire Ø (mm)

MFTBPJSMM605

M5 mini

MFTBPJSMM606

M6 mini

MFTBPJSM605 MFTBPJSM606

L (mm)

L1 (mm)

OD (mm)

Accessory

Breaking Load (KGS)

3.0*

107

Ring

750

4.0*

133

Ring

1,200

2.5*

150

5.5

Ring

600

3.0*

170

6.3

Ring

1,000

MFTBPJSM608

4.0*

205

105

7.5

Ring

1,400

MFTBPJSM610

M10

5.0

240

125

9.1

Ring

2,200

MFTBPJSM612

M12

6.0

295

150

12.5

Ring

4,000

MFTBPJSM616

M16

8.0

370

190

16.1

Cotter pin

6,500

Code

Safe working load - Standard safety factor for working load is 25% of Breaking Load

S3121P With threaded stud into concrete see p.50 for details

Online catalogue: www.anzor.co.nz/wire-rigging Information used exclusively under permission of Strudyna Co. Ltd

SWAGE TERMINALS

s7805 - TOGGLE/SWAGE TERMINAL A

EX-STOCK SUBJEC T TO PR IOR SALE

F Code

Wire Ø (mm)

A (mm)

B (mm)

D (mm)

F (mm)

L (mm)

Accessory

Breaking Load (KGS)

MFSWTT603

3.0

6.35

3.30

Ring

670

MFSWTT604

4.0

7.54

4.30

Ring

1,400

MFSWTT605

5.0

9.12

5.30

Ring

1,700

MFSWTT606

6.0

12.54

6.35

Ring

4,000

MFSWTT608

8.0

16.13

8.40

Cotter pin

7,000

MFSWTT610

10.0

17.85

10.50

Cotter pin

7,500

Safe working load - Standard safety factor for working load is 25% of Breaking Load

S7803 - FORK/SWAGE TERMINAL A

EX-STOCK SUBJEC T TO PR IOR SALE

L L1

F Code

Wire Ø (mm)

A (mm)

MFSWFT4025

2.5

MFSWFT403

3.0

MFSWFT404

B (mm)

D (mm)

F (mm)

L (mm)

L1 (mm)

Accessory

Breaking Load (KGS)

5.00

7.0

5.53

2.70

62.0

Ring

700

6.00

8.0

6.35

3.30

68.0

Ring

1,250

4.0

8.00

11.0

7.54

4.30

77.0

Ring

1,800

MFSWFT405

5.0

9.00

12.0

9.12

5.30

87.0

Ring

2,650

MFSWFT406

6.0

12.00

14.5

12.54

6.35

109.0

Ring

4,000

MFSWFT408

8.0

14.28

15.0

16.13

8.40

148.0

Cotter pin

6,500

Safe working load - Standard safety factor for working load is 25% of Breaking Load

Online catalogue: www.anzor.co.nz/wire-rigging www.anzor.co.nz/arch Information used exclusively under permission of Strudyna Co. Ltd

Strudyna is proud to offer Hamma cables as part of Strudyna's tensile Multiple annealing stages during the drawing process to ensure wire High tensile rods systems cable systems. Hamma cables are develope d exclusivel y for high does not work harden, and finished by passing through an ultrasonic tensile performances through unique techniques that differentiate from bath to remove any impuritie s that may have attache d during other manufactures. Hamma cables start with the highest quality of manufacture . This makes Hamma cable unique in raising ultimate stainless steel source follow by unique descaling of stainless steel rod corrosion resistance for extreme harsh and severe local conditions as Strudyna is proud to offer Hamma cables as part of Strudyna's tensile Multiple annealing stages during the drawing process to ensure wire to remove impurities, which may have attached during transport, prior to well as increased work life due to the multiple annealing processes, cable systems. Hamma cables are develope d exclusivel y for high does not work harden, and finished by passing through an ultrasonic commencing production. ensuring longevity of the wire. Hamma cables are ensured of superior tensile performances through unique techniques that differentiate from bath to remove any impuritie s that may have attache d during aesthetic finish due to an excellent brightness and ultimate smooth other manufactures. Hamma cables start with the highest quality of manufacture . This makes Hammasurface cable unique in raising Types resistance : 1x19for(rigid), 7x7 (semi-flexible), 7x19 (flexible) exterior.corrosion stainless steel source follow by unique descaling of stainless steel rod extreme harsh and severe local conditions as

SWAGE STUD AT EACH END

well as increased work life due to the multiple annealing processes, HAMMA PRO-STRAND ensuring longevity of the wire. Hamma cables are ensured of superior

to remove impurities, which may have attached during transport, prior to commencing production.

aesthetic finish due to an excellent surface brightness and smooth : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible) exterior.Types

- Built with Micro Stretch Technology (MST), the Minimum Breaking

Benefits

EX-STOCK SUBJEC T TO PR IOR SALE

HAMMA PRO-STRAND Strength (MBS) is 20-30% higher than conventional 1x19 wire of the

SWAGE STUD AT EACH same size. This meansEND that you can downsize the structural cable

and maintain the strength. This results in improved aesthetics, less - Built with Micro Stretch Technology (MST), the Minimum Breaking weight in the structure, and cost savings on smaller fittings, which Strength (MBS) is 20-30% higher than conventional 1x19 wire of the can besame significant largethat projects. size. Thison means you can downsize the structural cable

Benefits

S7801 LH Swage Stud

: Bright and smooth for increased corrosion resistance.

Finish

Specific features: Adjust by tightening the hex nuts at each end. Application: Predominantly used for structural cables, e.g glass facades - Extremely non-flexible. - Smooth clean finish. Pin-to-Pin Specific - High features: breaking strain. - No pre-stress required. Middle- adjustment - Extremely non-flexible. - Smooth clean finish. Extremely low stretch.

1x19 1x7

- High breaking strain. - Extremely low stretch.

1x19

Anzor 316 1x19 Wire 1x19

7x7

7x19

1x19

7x7

: 316 Stainless Steel

Sizes Predominantly : 1.6mm - 12mm Application: used for structural cables, e.g glass facades

with Micro-stretch Technologies.

1x7

and maintain the strength. This results in improved aesthetics, less

Compact wire strand in constructions 1x7, 1x19, 1x25fittings, which weight in the structure, and cost savings on smaller can be significant 316 Stainless Steel on large projects. 1.6mm - 12mm : Compact wire strand in constructions 1x7,resistance. 1x19, 1x25 Bright and smooth for increased corrosion

Material

Ø Wire

with Micro-stretch Technologies.

S7801 RH Swage Stud

Wire

: Types Material : Sizes : Finish Types:

- No pre-stress required.

HAMMA X-STRAND Technical Features

HAMMA X-STRAND Benefits - Enhanced corrosion resistance. Produced with a high level • A low cost, wire tensioning system, without the cost of a and ultrasonic removal of impurities. Benefitsof descaling - Enhanced corrosion resistance. Produced with a high level of descaling andlasting ultrasonic removal of impurities. turnbuckle. Hex nuts at each end perform the tensioning. Resulting in longer shine and ultimate corrosion Resulting in longer lasting shine and ultimate corrosion resistance, better for NZ’s harsh corrosive conditions.

7x19

•

better for NZ’s harsh corrosive conditions. Material:resistance, 316 Stainless Steel.

Material : 316 Stainless Steel : 316 Stainless Steel(p.105) or 316 Ultra wire (p.106) • Material Wire: Anzor 316 wire Sizes Sizes: 0.8mm - 19mm : 0.8mm - 19mm Types : 1x19: (rigid), 7x7 (semi-flexible), 7x19 (flexible) • Types Application: Suited to static applications 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible) Finish Finish : Bright and smooth for increased corrosion resistance. : Bright and smooth for increased corrosion resistance. e.g. staircases and straight line installations. Balustrades, shade sails, foliage trellises, and • Application: Swaging: hex shade swaged (by hand tool)and for 3.0 & 4.0mm* Application: Balustrades, sails, foliage trellises, architectural rigging. rigging. wire,architectural or alternatively roll swaged by a professional rigger. Recommended for exterior coastalareas. areas. Recommended for exterior useuse in in coastal

Page 105 Wire characteristics & breaking loads - please see p.105

Code:

Hand Code:

toolMFW...U for swaging 5.0mm wire available on request. MFW...U NB: there may be a lead time.

Maintenance:

S7801 SWAGE STUD

One hex nut is supplied per stud for tensioning the wire.

Wire rope must be cleaned & maintained regularly.

Wire rope must be cleaned & maintained regularly. See our Maintenance & Cleaning guidelines on p.21. See our Maintenance & Cleaning guidelines on p.21.

HAMMA MEGA-STRAND

HAMMA Benefits MEGA-STRAND - Designed for large structural projects. To date this is the largest

stainless steel strand on the market. - Designed for large structural projects. To date this is the largest stainless steel strand on the market. Types : A conventional 1x37 and 1x61 construction wire stand.

Benefits

OD : 316 Stainless Steel Material Types Sizes: A conventional 1x37 and 1x61 construction wire stand. : 20mm - 42mm. Material Steel Finish: 316 :Stainless Bright and smooth for increased corrosion resistance. L1 L2 structural projects, such as bridges. Sizes Application: : 20mmLarge - 42mm. Finish Specific : Bright and smooth for increased Lcorrosion resistance. features: Application: Large projects, such as bridges. - Low structural stretch.

- Higher comparative breaking strain.

with Ultimate Structural cable

MFSWS4W03.0M05 MFSWS4W03M06 1x37

1x37

1x61

3.0 3.0

96mm

OD (mm) 6.3

6.3

MFSWS4W04M06

4.0

96mm

110

7.5

MFSWS4W04M08

4.0

108mm

115

7.5

MFSWS4W05M10

5.0

122mm

M10

128

9.1

MFSWS4W06M12

6.0

158mm

M12

162

12.5

installation

Tighten hex nut to tension wire.

100

Wire Ø (mm)

Code

Specific features: - Wide cable size range. - Low -stretch. Compatible with bothLsplicing and Adjustment Thread M L1 swaging. L2 - Higher comparative - Good corrosion breaking resistance.strain. +/- - Wide cable (mm) (mm) (mm) (mm) size range. with both splicing and32 swaging. 40 80mm- CompatibleM5 80 - Good corrosion resistance.

Nylon isolating washer with a stainless washer (sold separately) and hex nut.

Steel channel or similar - supplied by others.

Online catalogue: www.anzor.co.nz/wire-rigging Information used exclusively under permission of Strudyna Co. Ltd

SWAGE FORK TERMINAL + STUD

EX- STOCK SUB JEC T TO PRIOR SALE

Swage fork terminal + SWAGE Stud S7803 Fork Terminal

S7801 Swage Stud

Wire

Ø Wire

Pin-to-Pin Middle adjustment

S7803 Fork Terminal

Technical Features •

Low cost, simple wire rigging system.

•

Material: 316 Stainless Steel.

•

Wire: Anzor 316 wire (p.105) or 316 Ultra wire (p.106)

•

Application: Suited to static applications e.g. balustrades, staircases and straight line installations.

•

Swaging: hex swaged (by hand tool) for 3.0 & 4.0mm* wire, or alternatively roll swaged by a professional rigger.

See p.97 for dimensions & breaking loads.

Hand tool for swaging 5.0mm wire available on request. NB: there may be a lead time. High tensile rods systems

S7801 RH SWAGE STUD

Strudyna isOne proudhex to offer cables asper part stud of Strudyna's tensile Multiple annealing stages during the drawing process to ensure wire nutHamma is supplied for tensioning the wire. High tensile rods systems cable systems. Hamma cables are develope d exclusivel y for high does not work harden, and finished by passing through an ultrasonic tensile performances through unique techniques that differentiate from bath to remove any impuritie s that may have attache d during other manufactures. Hamma cables start with the highest quality of manufacture . This makes Hamma cable unique in raising ultimate stainless steel source follow by unique descaling of stainless steel rod corrosion resistance for extreme harsh and severe local conditions as Strudyna is proud to offer Hamma cables as part of Strudyna's tensile Multiple annealing stages OD during the drawing process to ensure wire to remove impurities, which may have attached during transport, prior to well as increased work life due to the multiple annealing processes, cable systems. Hamma cables are develope d exclusivel y for high does not work harden, and finished by passing through an ultrasonic commencing production. ensuring longevity of the wire. Hamma cables are ensured of superior tensile performances through unique techniques that differentiate from bath to remove any impuritie s that may have attache d during aesthetic finish due to an excellent brightness and ultimate smooth other manufactures. Hamma cables start with the highest quality of manufacture . This makes Hammasurface cable unique inL1 raising Types resistance : 1x19for(rigid), 7x7 (semi-flexible), 7x19 (flexible) exterior.corrosion stainless steel source follow by unique descaling of stainless steel rod extreme harsh and severe local conditions as

M L2

well as increased work life due to the multiple annealing processes, HAMMA PRO-STRAND ensuring longevity of the wire. Hamma cables are ensured of superior

to remove impurities, which may have attached during transport, prior to commencing production.

Benefits

aesthetic finish due to an excellent surface brightness and smooth : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible) exterior.Types

- Built with Micro Stretch Technology (MST), the Minimum Breaking

HAMMA PRO-STRAND Strength (MBS) is 20-30% higher than conventional 1x19 wire of the

Wire Ø Adjustment Thread M the L L1 same size. This means that you can downsize structural cable maintain the strength. This results in improved aesthetics, less (mm) Benefitsand (mm) (mm) (mm) - Built+/with Micro Stretch Technology (MST), the Minimum Breaking weight in the structure, and cost savings on smaller fittings, which

Code

with Micro-stretch Technologies.

Strength (MBS) is 20-30% higher than conventional 1x19 wire of the

L2 (mm)

OD (mm)

MFSWS4W03.0M05

3.0

can besame significant largethat projects. size. Thison means you can downsize the structural cable

6.3

MFSWS4W03M06

Compact wire strand in constructions 1x7, 1x19, 1x25fittings, which weight in the structure, and cost savings on smaller 48mm M6 97 38 can be significant 316 Stainless Steel on large projects. 1.6mm - 12mm 48mm M6 110 45 : Compact wire strand in constructions 1x7, 1x19, 1x25 Bright and smooth for increased corrosion resistance.

6.3

MFSWS4W04M06

: : Sizes : 4.0 Finish Types:

7.5

40mm

Types

3.0 Material

and maintain the strength. This results in improved aesthetics, less

MFSWS4W04M08

Material : 316 Stainless Steel Sizes Predominantly : 1.6mm - 12mm Application: used for structural cables, e.g glass facades Finish : Bright and smooth for increased corrosion resistance.

4.0

7.5

MFSWS4W05M10

Specific features: Application: Predominantly structural cables, e.g glass 5.0 61mm used -forSmooth M10 128facades - Extremely non-flexible. clean finish.

9.1

1x7 1x19 MFSWS4W06M12

6.0

12.5

with Micro-stretch Technologies.

1x7

1x19

57mm

115

Specific - High features: breaking strain. - No pre-stress required. - Extremely non-flexible. - Smooth clean finish. - Extremely low stretch. - High breaking strain. - No pre-stress required. - Extremely low stretch.

79mm

M12

162

HAMMA X-STRAND

1x19

7x7

7x19

1x19

7x7

HAMMA X-STRAND Benefits - Enhanced corrosion resistance. Produced with a high level and ultrasonic removal of impurities. Benefitsof descaling - Enhanced corrosion resistance. Produced with a high level of descaling andlasting ultrasonic removal of impurities. Resulting in longer shine and ultimate corrosion Resulting in longer lasting shine and ultimate corrosion resistance, better for NZ’s harsh corrosive conditions.

INSTALLATION Tighten hex nut to tension wire. Anzor 316resistance, 1x19 Wire better for NZ’s harsh corrosive conditions.

7x19

Material : 316 Stainless Steel Material : 316 Stainless Steel Sizes : 0.8mm - 19mm

Page 105

Sizes : 0.8mm - 19mm Wire characteristics &(semi-flexible),7x19 Types 7x7 (semi-flexible), (flexible) Types: 1x19: (rigid), 1x19 (rigid), 7x7 7x19 (flexible) Finish Finish: Bright smooth for increased corrosion : Bright and smooth for increased corrosionresistance. resistance. breaking loadsand- see p.105 Application: Balustrades, shade sails, foliage trellises,and and Application: Balustrades, shade sails, foliage trellises, architectural rigging. architectural rigging. Recommended for exterior use in coastal areas. Recommended for exterior use in coastal areas.

Code:

MFW...U

Maintenance:

Wire rope must be cleaned & maintained regularly.

Online catalogue: www.anzor.co.nz/wire-rigging www.anzor.co.nz/arch Maintenance:

Wire rope must be cleaned & maintained regularly. See our Maintenance & Cleaning guidelines on p.21. See our Maintenance & Cleaning guidelines on p.21.

HAMMA MEGA-STRAND Information used exclusively under permission of Strudyna Co. Ltd

HAMMA MEGA-STRAND

See p.98 for installation details.

101

ROD DYNAMIC SWAGE SYSTEM

RDS CABLE SYSTEM RdS adjustable fork + PBI Swage stud

High tensile rods systems

Strudyna is proud to offer Hamma cables as part of Strudyna's tensile Multiple annealing stages during the drawing process to ensure wire High tensile rods systems cable systems. Hamma cables are develope d exclusivel y for high does not work harden, and finished by passing through an ultrasonic Cable System Features tensile performances through unique techniques that differentiate from bath toRDS remove any impuritie s thatTechnical may have attache d during K EX-STOC other manufactures. Hamma cables start with the highest quality of manufacture . This makes Hamma cable unique in raising ultimate • Attractive look as the threads are hidden. SUBJEC T stainless steel source follow byIOR unique descaling of stainless steel rod corrosion resistance for extreme harsh and severe local conditions as PR Strudyna isTO proud to offer Hamma cables as part of Strudyna's tensile Multiple annealing stages during the drawing process to ensure wire to remove impurities, whichSA may well as • increased work life due to the multiple processes, LE have attached during transport, prior to Made from passivated 316 annealing Stainless Steel for enhanced cable systems. Hamma cables are develope d exclusivel y for high does not work harden, and finished by passing through an ultrasonic commencing production. ensuring longevity of the wire. Hamma cables are ensured of superior tensile performances through unique techniques that differentiate from bath to remove any impuritie s that may have attache d during corrosion resistance. aesthetic finish due to an excellent brightness and ultimate smooth other manufactures. Hamma cables start with the highest quality of manufacture . This makes Hammasurface cable unique in raising Types resistance : 1x19for(rigid), 7x7 (semi-flexible), 7x19 (flexible) exterior.corrosion stainless steel source follow by unique descaling of stainless steel rod extreme harsh and severe local conditions as

•

Installation: not for the faint of heart. Full cable must be

well as increased work life due to the multiple annealing processes, HAMMA PRO-STRAND ensuring longevity of the wire. Hamma cables are ensured of superior

to remove impurities, which may have attached during transport, prior to commencing production.

turned by two people, one at each end.

Benefits

aesthetic finish due to an excellent surface brightness and smooth Types : 1x19 (rigid), (semi-flexible), 7x19 (flexible) Recommended for 7x7 advanced installers only. exterior.

- Built with Micro Stretch Technology (MST), the Minimum Breaking

HAMMA PRO-STRAND Strength (MBS) is 20-30% higher than conventional 1x19 wire of the •

Wire: Anzor 316 Ultra wire - page 106.

same size. This means that you can downsize the structural cable and maintain the strength. This results in improved aesthetics, less Benefits - Built with Micro Stretch Technology (MST), the Minimum Breaking weight in the structure, and cost savings on smaller fittings, which Strength (MBS) is 20-30% higher than conventional 1x19 wire of the can besame significant largethat projects. size. Thison means you can downsize the structural cable improved Stud aesthetics, less PBI inSwage Wireand maintain the strength. This results

RDS Fork (p.76)

: Compact Types wire strand in constructions 1x7, 1x19, 1x25fittings, which weight in the structure, and cost savings on smaller can be significant Ø Wire Material : 316 Stainless Steel on large projects. Sizes : 1.6mm - 12mm : Compact wire strand in constructions 1x7,resistance. 1x19, 1x25 Finish Types: Bright and smooth for increased corrosion Material 316 Stainless Steel Tension by turning both swage: terminals simultaneously. Sizes Predominantly : 1.6mm - 12mm Application: used for structural cables, e.g glass facades Finish

with Micro-stretch Technologies.

1x7

1x19 1x7

1x19

Anzor 316 ULTRA Wire 1x19

7x7

7x19

1x19

7x7

: Bright and smooth for increased corrosion resistance.

Specific features: Application: Predominantly used for structural cables, e.g glass facades -Pin-to-Pin Extremely non-flexible. - Smooth clean finish. Specific - High features: breaking strain. - No pre-stress required. Middle adjustment - Extremely non-flexible. - Smooth clean finish. - Extremely low stretch. - High breaking strain. - Extremely low stretch.

- No pre-stress required.

HAMMA X-STRAND For full RDS Fork technical details, Breaking Loads and HAMMA X-STRAND Benefits - Enhanced corrosion resistance. Produced with a high level Coupling Plates - see p.79 - 84. and ultrasonic removal of impurities. Benefitsof descaling - Enhanced corrosion resistance. Produced with a high level of descaling andlasting ultrasonic removal of impurities. Resulting in longer shine and ultimate corrosion Resulting in Wire longer lasting shine and ultimate corrosion resistance, better for NZ’s corrosive conditions. Fork + Stud Size Ø harsh Wire type Adjustment resistance, better for NZ’s harsh corrosive conditions.

7x19

(mm)

+/-

Material : 316 Stainless Steel Material : 316 Stainless Steel Sizes Sizes - 19mm 3/8”: 0.8mm UNF 1x19 19mm : 0.8mm - 19mm5.0 Types Types: 1x19: (rigid), 7x7 (semi-flexible), 7x19 (flexible) 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible) Finish Finish and smooth for increased corrosion 1/2”: Bright UNF 6.0 1x19 30mm : Bright and smooth for increased corrosionresistance. resistance.

Page 106 Wire characteristics & breaking loads - please see p.106

5/8” Balustrades, UNFBalustrades, 8.0 1x19 Application: shade sails, foliage trellises,and and 35mm Application: shade sails, foliage trellises,

architectural rigging. architectural rigging. *Minimum BreakingRecommended Load (MBL) - after minimum breaking load of cable assembly. for swaging exterior coastal areas. Recommended for exterior useuse in in coastal areas. *For information on Safe Working Loads, go to p.105. Code: MFW...U

Code:

MFW...U

Maintenance:

Wire rope must be cleaned & maintained regularly.

Wire rope must be cleaned & maintained regularly. See our Maintenance & Cleaning guidelines on p.21. See our Maintenance & Cleaning guidelines on p.21.

HAMMA MEGA-STRAND

Loctite 243

HAMMA MEGA-STRAND Benefits - Designed for large structural projects. To date this is the largest Maintenance & Cleaning

We recommend applying Loctite 243 to the pin, washer & screw set for permanent fixture.

Benefits

stainless steel strand on the market. - Designed for large structural projects. To date this is the largest

Regular and cleaning is required to stainlessmaintenance steel strand on the market. maintain appearance.

Types : A conventional 1x37 and 1x61 construction wire stand. Material : 316 Stainless Steel Types Sizes: A conventional 1x37 and 1x61 construction wire stand. : 20mm - 42mm. Material Steel Finish: 316 :Stainless Bright and smooth for increased corrosion resistance. structural projects, such as bridges. Sizes Application: : 20mmLarge - 42mm.

See p.21 for Anzor’s Cleaning & Maintenance Guide.

Finish Specific : Bright and smooth for increased corrosion resistance. features: Application: Large projects, such as bridges. - Low structural stretch. - Higher comparative breaking strain.

Specific features: - Wide cable size range. - Low -stretch. Compatible with both splicing and swaging. - Higher comparative - Good corrosion breaking resistance.strain. - Wide cable size range. - Compatible with both splicing and swaging. - Good corrosion resistance.

Threads must be lubricated with NICKEL ANTI SEIZE 1x37 1x61 TO PREVENT GALLING

with Ultimate Structural cable

102

1x37

MBL* (kN)

1x61

Online catalogue: www.anzor.co.nz/wire-rigging Information used exclusively under permission of Strudyna Co. Ltd

18 26 47

P2H ADJUSTER

E L AB L AVAI DER R TO O approx

P2H ADJUSTER - ARCHITECTURALLY DESIGNED WIRE Tensioning system

er y D eliv onths 4M

Tension by turning the “In-Socket” only.

A “HIGH END” ARCHITECTURALLY DESIGNED FITTING • High quality tensioning unit for cable.

P2H - Fork

• Designed for performance and aesthetic appeal.

Lock Nut for In-Socket

• Threads are hidden for enhanced aesthetic appeal.

• The double locking nut system offers good security to counter external dynamic and resonance forces.

Lock Nut for Ex-socket Swage Terminal

• Due to the its unique internal adjustment system, the wire can be tensioned by turning just one end adjuster only, without turning the entire cable.

P2H Adjuster Technical Features •

For Cable diameter: 8mm – 42mm.

•

Made from passivated 316 Stainless Steel for enhanced corrosion resistance.

•

Installation - special P2H tools required.

•

Dynamic load bearing design with double end adjustment.

•

Wire: HAMMA wire - page 107 & 108.

Information used exclusively under permission of Strudyna Co. Ltd

103

P2H ADJUSTER

P2H ADJUSTER - technical information P2H Adjuster

P2H Adjuster

Ø Cable

Cable Length

Cable Ø Adjustment (mm) (+/-)

Min Cable Length

(mm)

Cable + (L1x2) Length

836

182

1,200

(mm)

Pin to Pin

Cable Ø Adjustment (mm) (+/-) 22.0

60mm

Min Cable Length

(mm)

Cable + (L1x2) Length

2,136

332

2,800

(mm)

Pin to Pin

8.0

40mm

10.0

40mm

964

218

1,400

24.0

64mm

2,320

340

3,000

12.0

40mm

1,164

218

1,600

28.0

64mm

2,700

350

3,400

14.0

56mm

1,372

264

1,900

30.0

70mm

2,890

405

3,700

16.0

56mm

1,572

264

2,100

34.0

80mm

3,288

456

4,200

19.0

60mm

1,872

314

2,500

36.0

80mm

3,390

455

4,300

20.0

60mm

1,972

314

2,600

42.0

100mm

4,388

606

5,600

Figures described above are not under tension.

For installation guide and tools please contact one of our architectural product managers or visit www.anzor.co.nz/arch/p2h Loctite 243 We recommend applying Loctite 243 to the pin, washer & screw set for permanent fixture.

Maintenance & Cleaning Regular maintenance and cleaning is required to maintain appearance. See p.21 for Anzor’s Cleaning & Maintenance Guide.

Threads must be lubricated with NICKEL ANTI SEIZE TO PREVENT GALLING

P2H Precautions

104

•

Always select the correct cable based on the load requirement.

•

Do not overload the cable above its designed Safe Working Load.

•

Never use the P2H adjuster for lifting purposes.

•

Cable assembly should not be tensioned while under load and should always be used in a straight line. Separate tensioning is required with hydraulic equipment. See our website or contact us for full installation procedures.

•

Use nickel anti-seize to prevent the system galling.

Online catalogue: www.anzor.co.nz/wire-rigging Information used exclusively under permission of Strudyna Co. Ltd

P2H ADJUSTER

HAMMA PRO-STRAND

to remove impurities, which may have attached during transport, prior to commencing production.

Benefits

well as increased work life due to the multiple annealing processes, ensuring longevity of the wire. Hamma cables are ensured of superior aesthetic finish due to an excellent surface brightness and smooth : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible) exterior.Types

- Built with Micro Stretch Technology (MST), the Minimum Breaking

HAMMA PRO-STRAND Strength (MBS) is 20-30% higher than conventional 1x19 wire of the

same size. This means that you can downsize the structural cable P2H ADJUSTER - cable information and maintain the strength. This results in improved aesthetics, less Benefits

High tensile rods systems

- Built with Micro Stretch Technology (MST), the Minimum Breaking

weight in the structure, and cost savings on smaller fittings, which Strength (MBS) is 20-30% higher than conventional 1x19 wire of the can besame significant largethat projects. size. Thison means you can downsize the structural cable

and maintain the strength. This results in improved aesthetics, less ØD P2H Adjuster P2H Adjuster Cable Multiple annealing stages during theTypes drawing process to ensure wire wire strand in constructions 1x7, 1x19, 1x25fittings, which : Compact weight in the structure, and cost savings on smaller

ud to offer Hamma cables as part of Strudyna's tensile Hamma cables are develope d exclusivel y for high nces through unique techniques that differentiate from ures. Hamma cables start with the highest quality of ource follow by unique descaling of stainless steel rod ities, which may have attached during transport, prior to duction.

does not work harden, and finished Material by passing through anStainless ultrasonic can be significant Steel on large projects. : 316 bath to remove any impuritie s that may have: attache d during Sizes 1.6mm - 12mm manufacture . This makes Hamma cable unique in raising ultimate wire strand in constructions 1x7,resistance. 1x19, 1x25 : Compact Finish Types: Bright and smooth for increased corrosion corrosion resistance for extreme harsh and severe local conditions as Steel Material : 316 Stainless well as increased work life due to the multiple annealing :processes, Sizes 1.6mm 12mm Application: Predominantly used for structural cables, e.g glass facades ensuring longevity of the wire. Hamma cablesFinish are ensured :of Bright superiorand smooth for increased corrosion resistance. High tensile rods systems aesthetic finish due to an excellent surface brightness and smooth Specific features: : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible) Application: Predominantly used for structural cables, e.g glass facades exterior.Types

Ø Cable

with Micro-stretch Technologies.

- Extremely non-flexible.

HAMMA PRO-STRAND 1x19

- Smooth clean finish.

Pin-to-Pin Middle adjustment

High tensile rods systems

Specific - High features: breaking strain. - No pre-stress required. - Extremely non-flexible. - Smooth clean finish. - Extremely low stretch. Strudyna is proud to offer Hamma cables as part of Strudyna's tensile Multiple annealing- stages during the drawing process to ensure wire required. High breaking strain. - No pre-stress 1x7 1x19 Benefits - Built with yMicro Stretch Technology (MST), the Minimum Breaking cable systems. Hamma cables are develope d exclusivel for high does not work harden, and finished by passing through an ultrasonic - Extremely low of stretch. Strength (MBS) is 20-30% higher than conventional 1x19 wire the with Micro-stretch Technologies.

1x7

Anzor 316 Ultra Wire

techniques that differentiate fromthe drawing bath process to remove any impuritie s that may have attache d during o offer Hamma cablestensile as partperformances of Strudyna'sthrough tensile uniqueMultiple annealing during to ensure wire samestages size. This means that you can downsize the structural cable other manufactures. Hamma startnot with theharden, highestand quality of by passing manufacture . This Hamma cable unique in raising ultimate mma cables are develope d exclusivel y for high cablesdoes work finished through an makes ultrasonic and maintain the strength. This results in improved aesthetics, less stainless steel source follow by unique descaling of stainless steel rod corrosion resistance for extreme harsh and severe local conditions as s through unique techniques that differentiate from bath to remove anyin the impuritie s thatand may attache d during weight structure, costhave savings on smaller fittings, which to with remove which may attached during prior on to large well as increased work life due to the multiple annealing Produced processes, with a high level bemakes significant projects. Benefits - Enhanced corrosion resistance. . Hamma cables start theimpurities, highest quality of have manufacture . can Thistransport, Hamma cable unique in raising ultimate commencing production. ensuring longevity of the wire. cables are ensured of superior ce follow by unique descaling of stainless steel rod corrosion resistance for extreme harsh and severe local conditions as Hamma of descaling and ultrasonic removal of impurities. Benefits - Enhanced corrosion resistance. Produced with a high level 1x19 7x7 during 7x19transport, prior to aestheticannealing finish to1x25 an excellent surface brightness and smooth : Compact Types strand 1x7, due 1x19, s, which may have attached well as increased work wire life due to in theconstructions multiple processes, of (rigid), descaling andlasting ultrasonic removal of impurities. in longer shine and ultimate corrosion Types Resulting : 1x19 7x7 (semi-flexible), 7x19 (flexible) Material : 316 Stainless Steel exterior. 1x19 7x7 7x19 8.0 18 1x19 16 ction. ensuring longevity of the wire. Hamma cables are ensured of superior Resulting in longer lasting shine and ultimate corrosion40mm resistance, better for NZ’s harsh corrosive conditions. Sizes : 1.6mm - 12mm High tensile rods systems aesthetic finish due to an excellent surface brightness and smooth resistance, better for NZ’s harsh corrosive conditions. Finish Types : Bright: and smooth for increased corrosion resistance. 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible) 10.0 20 1x19 20 40mm exterior. Material : e.g 316glass Stainless Application: Predominantly used for structural cables, facades Steel Material : 316 Stainless Steel 20 1x19 22 40mm Benefits - Built: with Micro-Stretch Technology (MST), the Minimum Breaking Sizes12.0 0.8mm 19mm Sizes : 0.8mm - 19mm Specific features: Strength (MBS) is 20-30% higher than conventional 1x19 wire of the :finish. 1x19 7x7 (semi-flexible), 7x19 (flexible) Types : (rigid), 1x19 (rigid), 7x7can (semi-flexible), 7x19 (flexible) non-flexible. - Types Smooth clean Strudyna is proud to offer Hamma cables as- Extremely part of Strudyna's tensile Multiple annealing stages during the drawing process to the ensure wire same size. This means that you downsize structural cable 14.0 21 1x19 24 56mm Benefits Built with Micro Stretch Technology (MST), the Minimum Breaking Finish : Bright and smooth for increased resistance. High breaking strain. No pre-stress required. Finish : Bright and by smooth for increased corrosion resistance. cable Hamma cables are develope d exclusivel y for high does not work harden, and finished passing through an corrosion ultrasonic 1x7 systems. 1x19 and maintain the strength. This results in improved aesthetics, less Strength (MBS) is 20-30% conventional 1x19 wiresofthat the may have attache d during - Extremely low stretch. tensile performances through unique techniques that differentiate from higher baththan to remove any impuritie weight in the structure, and cost savings on smaller fittings, which 16.0 24 1x19 27 56mm same size. This means that you can downsize the structural cable Application: can significant on large projects. other manufactures. Hamma cables start with the highest quality of manufacture . be This makes Hamma cable unique in foliage raisingtrellises, ultimate Balustrades, shade sails, trellises,and and Application: Balustrades, shade sails, foliage and maintain the strength. This results in improved aesthetics, less stainless steel source follow by unique descaling of stainless steel rod corrosion resistance for architectural extreme30 harsh and severe1x19 local conditions as 33 rigging. 19.0 60mm architectural rigging. weight in the structure, and cost savings on smaller fittings, which Compactwork wireRecommended strand 1x7, 1x19, 1x25 to remove impurities, which may have attachedcan during transport, prior to Types well as :increased life due intoconstructions the multiple annealing processes, for exterior in coastalareas. areas. be significant on large projects. Recommended for exterior useuse in coastal Material 316 Stainless commencing production. ensuring: longevity of theSteel wire. Hamma cables are ensured of superior Benefits - Enhanced corrosion resistance. Produced with a high level - 12mm Sizes : 1.6mm Code: aesthetic finish due1x25 to MFW...U an excellent surface brightness and smooth : Compact Types wire strand in constructions 1x7, 1x19, of descaling and ultrasonic removal of impurities. Code: MFW...U Finish : Bright and for increased corrosion resistance. 7x19 Types : smooth 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible) Material : 316Resulting Stainless in Steel longer lasting exterior. shine and ultimate corrosion Maintenance: Wirefor rope must cables, be cleaned & maintained regularly. Sizes : 1.6mm - 12mmbetter for NZ’s Application: Predominantly used structural e.g glass facades resistance, harsh corrosive conditions. Maintenance: Wire rope must be cleaned & maintained regularly. See our Maintenance & Cleaning guidelines on p.21. Finish : Bright and smooth for increased corrosion resistance. Specific features: See our Maintenance & Cleaning guidelines on p.21. Material : 316 Stainless Steel Application: Predominantly used for structural -cables, e.g glass facades Extremely non-flexible. Smooth clean finish. Sizes : 0.8mm - 19mm Benefits High - Built with Micro (MST), the Minimum Breaking breaking strain.Stretch-Technology No pre-stress required. 1x7features: 1x19 Types : 1x19 (rigid), 7x7 (semi-flexible),- 7x19 (flexible) Specific Strength (MBS) is 20-30% higher than conventional 1x19 wire of the - Extremely low stretch. Finish : Bright and smooth for increased corrosion resistance. Benefits Designed for large structural projects. To date this is the largest - Extremely non-flexible. - Smooth clean finish. same size. This means that you can downsize the structural cable stainless steel the market. - High breaking strain. - No pre-stress and required. 1x7 1x19 the strength. Thisstrand resultson in improved aesthetics, -maintain Designed for large structural projects. To dateless this is the largest Application: Balustrades, shade sails, Benefits foliage trellises, and - Extremely low stretch. weight in the structure, and cost savings on smaller fittings, which stainless steel strand on and the 1x61 market. architectural rigging. Types : A conventional 1x37 construction can be significant on large projects. 8.0 18 1x19 16 wire stand. 40mm Recommended for exterior use in coastal areas. Material : 316 Stainless Steel Benefits - Enhanced corrosion resistance. Produced with a high level Types : A conventional 1x37 and 1x61 construction : of Types Compact wire strand constructions 1x19, 1x25 Code: MFW...U 10.0 20 1x19 20wire stand. 40mm Sizes : and 20mm -in42mm. descaling ultrasonic removal of1x7, impurities. 1x19 7x7 7x19 Material : 316 Stainless Steel Resulting longer shine andfor ultimate corrosion Material : 316in:Stainless Steel Finish Brightlasting and smooth increased corrosion resistance. Benefits - Enhanced with a-regularly. high level Maintenance: Sizes Produced : resistance, 1.6mm 12mm Wire corrosion rope mustresistance. be cleaned & maintained better for NZ’s harsh corrosive conditions. 12.0 20 1x19 22 40mm Large structural projects, such as bridges. Sizes ofApplication: : 20mm - 42mm. of descaling ultrasonicFinish removal Bright and on smooth See ourand Maintenance & Cleaning: impurities. guidelines p.21. for increased corrosion resistance. 7x19 Resulting in longer lasting shine and ultimate corrosion Finish :Stainless Bright and smooth for increased corrosion resistance. Specific features: Material : 316 Steel 14.0Predominantly 21structural 1x25 56mm used for cables, e.g glass facades 24 resistance, better for NZ’s Application: harsh corrosive conditions. structural Application: projects, such as bridges. Sizes : 0.8mmLarge -- 19mm Low stretch. Types : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible) Specific16.0 features: Higher comparative breaking strain. 24 1x25 27 56mm Material Stainless for Steel Benefits : 316 - Designed large structural projects. To date this is thefor largest Specific Finish : features: Bright and smooth increased corrosion resistance. - Extremely non-flexible. - Smooth clean finish. - Wide cable size range. Sizes : 0.8mm - 19mm stainless steel strand on the market. - High breaking strain. - Noboth pre-stress required. - Low stretch. with splicing and swaging.33 with Ultimate Structural cable 19.0 30 1x25 60mm Types 1x7 : 1x19 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible) - Compatible Application: Balustrades, shade sails, foliage trellises, and - Extremely lowcomparative stretch. - Higher Finish and smooth 1x37 for increased resistance. Types : Bright : A conventional and 1x61corrosion construction stand. -wire Good corrosion breaking resistance.strain. architectural rigging. Material : 316 Stainless Steel Wide cable size range. 1x37 1x61 Recommended for exterior use in coastal areas. Application: Balustrades, shade sails, foliage trellises, and Sizes : 20mm - 42mm. - Compatible with both splicing and swaging. with Ultimate Structural cable architectural Finish : Bright andrigging. smooth for Code: increased corrosion resistance. MFW...U Good Application: Recommended for exterior in as coastal areas. corrosion resistance. Large structural projects,use such bridges. Benefits - Enhanced corrosion with a high level Maintenance: Wire rope must beresistance. cleaned & Produced maintained regularly. 1x37 1x61 Specific features: Code: of See descaling and ultrasonic removalguidelines of impurities. MFW...U our Maintenance & Cleaning on p.21. 1x19 7x7 7x19 - Low stretch. Resulting in longer lasting shine and ultimate corrosion Maintenance: Wirecomparative rope must bebreaking cleanedstrain. & maintained regularly. - Higher resistance, better for NZ’s harsh corrosive conditions. Seecable our Maintenance - Wide size range. & Cleaning guidelines on p.21. and20.0 swaging. - Compatible with both splicing Material 316 Stainless Steelstructural 30 projects. To 1x37 33 60mm Benefits -: Designed for large date this is the largest - Good corrosion resistance.Sizes : stainless 0.8mm - 19mm steel strand on the market. Types 22.0 : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible) 1x37 1x61 34 1x37 42 60mm Benefits - Designed for large structural projects.:ToBright date this the largest Finish and is smooth increased corrosion resistance. Types : A conventional 1x37for and 1x61 construction wire stand. stainless steel strand on the market. Material24.0 : 316 Stainless Steel 34 1x37 42 64mm Application:: 20mm Balustrades, shade sails, foliage trellises, and Sizes - 42mm. Types : A conventional 1x37 and 1x61 construction wire stand. architectural rigging. Finish 28.0 : Bright and smooth for40 increased corrosion resistance. 1x37 45 64mm Material : 316 Stainless Steel Recommended exterior useas inbridges. coastal areas. Application: Large structural for projects, such Sizes : 20mm - 42mm. 30.0 40 1x61 52 70mm Code: corrosion Specific features: MFW...U Finish : Bright and smooth for increased resistance. Application: Large structural projects, such as bridges. - Low stretch. Maintenance: rope must be48 cleaned & maintained regularly. - HigherWire comparative breaking strain. 34.0 1x61 56 80mm Specific features: See our & Cleaning guidelines on p.21. - Wide cable sizeMaintenance range. - Low stretch. - Compatible with both splicing 48 and swaging. 1x61 56 80mm - Higher comparative breaking strain. 36.0 - Good corrosion resistance. - Wide cable size range. 1x37 1x61 42.0 56 projects. To 1x61 60 100mm and swaging. - Compatible with both splicingBenefits - Designed for large structural date this is the largest - Good corrosion resistance. stainless steel strand on the market. 1x37 1x61 Types : A conventional 1x37 and 1x61 construction wire stand. Material : 316 Stainless Steel Sizes : 20mm - 42mm. Finish : Bright and smooth for increased corrosion resistance. Application: Large structural projects, such as bridges.

HAMMA X-STRAND

Wire Ø A Wire HAMMA X-STRAND (mm) (mm) type

ØD (mm)

Min +/-

Min Breaking Load* (kN) 47

HAMMA PRO-STRAND

106

chnologies.

145 180

Page 106 HAMMA X-STRAND

HAMMA PRO-STRAND

267

HAMMA PRO-STRAND

with Micro-stretch Technologies.

HAMMA MEGA-STRAND

HAMMA Cable Ø MEGA-STRAND A Wire

es.

(mm) (mm) HAMMA X-STRAND

type

ØD (mm)

Min +/-

Min Breaking Load* (kN) 57

HAMMA X-STRAND

90 127 170

HAMMA MEGA-STRAND

with Micro-stretch Technologies.

225

Page 107

282

HAMMA X-STRAND

HAMMA MEGA-STRAND

ctural cable

Cable Ø A (mm) (mm) HAMMA MEGA-STRAND

Wire type

ØD (mm)

Min +/-

Min Breaking Load* (kN) 279

HAMMA MEGA-STRAND

with Ultimate Structural cable

Page 108

HAMMA MEGA-STRAND

341 410 561 695 849 870 1,008

*Minimum Breaking Load (MBL) - after swaging minimum breaking load of cable assembly. Specific features:

Low stretch. *Refer to p.105 --for our guidelines on Safe Working Loads. Higher comparative breaking strain. - Wide cable size range. - Compatible with both splicing and swaging. - Good corrosion resistance.

with Ultimate Structural cable

1x37

1x61

Online catalogue: www.anzor.co.nz/wire-rigging www.anzor.co.nz/arch Information used exclusively under permission of Strudyna Co. Ltd

105

commencing production.

ensuring longevity of the wire. Hamma cables are ensured of superior aesthetic finish due to an excellent surface brightness and smooth : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible) exterior.Types

HAMMA PRO-STRAND Benefits

WIRE TYPES

- Built with Micro Stretch Technology (MST),High thetensile Minimum Breaking rods systems Strength (MBS) is 20-30% higher than conventional 1x19 wire of the same size. This means that you can downsize the structural cable and maintain the strength. This results in improved aesthetics, less weight in the structure, and cost savings on smaller fittings, which High tensile rods systems can be significant on large projects.

Strudyna is proud to offer Hamma cables as part of Strudyna's tensile Multiple annealing stages during the drawing process to ensure wire cable systems. Hamma cables are develope d exclusivel y for high does not work: harden, byconstructions passing through an ultrasonic Types Compactand wirefinished strand in 1x7, 1x19, 1x25 tensile performances through unique techniques that differentiate from bath to remove impuritie s that may have attache d during Stainless Steel Material : 316any Sizes : 1.6mm 12mm other manufactures. start cables with the quality of tensile manufacture This makes Hamma uniqueprocess in raising ultimate Strudyna is Hamma proud to cables offer Hamma as highest part of Strudyna's Multiple. annealing stages during cable the drawing to ensure wire Finish resistance : Brightfor and smoothharsh for increased corrosion resistance.as stainless steel follow by unique descaling of stainless steel yrod extreme severe local conditions cablesource systems. Hamma cables are develope d exclusivel for high corrosion does not work harden, and finishedand by passing through an ultrasonic to remove tensile impurities, which maythrough have attached during transport, prior to fromwell as increased workany life impuritie due to for the multiple Application: Predominantly used structural cables, e.g processes, glass performances unique techniques that differentiate bath to remove s that may annealing have attache d facades during commencing production. longevity. of themakes wire. Hamma are ensured of superior other manufactures. Hamma cables start with the highest quality ofensuring manufacture This Hamma cables cable unique in raising ultimate Specific features: finishresistance due to an surface smoothas stainless steel source follow by unique descaling of stainless steel rodaesthetic corrosion for excellent extreme harsh and brightness severe localand conditions - Extremely non-flexible. - Smooth clean finish. Types : 1x19 (rigid), 7x7 7x19 (flexible) to remove impurities, which may have attached during transport, prior toexterior. well as increased work life due to (semi-flexible), annealing processes, - High breaking strain. -the Nomultiple pre-stress required.

WIRE TYPES

with Micro-stretch Technologies.

1x7

Anzor 316 Wire

commencing production.

1x19

ensuring longevitylow of the wire. High tensile rods Hamma systems cables are ensured of superior - PRO-STRAND Extremely stretch. HAMMA aesthetic finish due to an excellent surface brightness and smooth exterior.Types

: 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)

HAMMA PRO-STRAND HAMMA X-STRAND Benefits - Built with Micro Stretch Technology (MST), the Minimum Breaking High tensile rods systems

Strength (MBS) is 20-30% higher than conventional 1x19 wire of the Benefits -process Enhanced corrosion resistance. Produced with a high level Strudyna is proud to offer Hamma cables as part of Strudyna's tensile Multiple annealing stages during the drawing wire Benefits - Wide range to of ensure sizes and configurations. sameof size. This that you removal can downsize the structural cable descaling and ultrasonic of impurities. cable systems. Hamma cables are develope y for high does not work harden, and finished by passing through an means ultrasonic Economical pricing. 1x19 d exclusivel 7x7 7x19 Benefitsand- maintain Built withthe Micro StretchThis Technology (MST), the Minimum Breaking strength. results improved aesthetics, less Resulting indlonger lasting shine andinultimate corrosion tensile performances through unique techniques that differentiate from bath to remove any impuritie s that may have attache during Strength (MBS) is 20-30% higher than conventional 1x19 wire of the weight in structure, cost savings on smaller fittings, which resistance, better forand NZ’s harsh corrosive conditions. other manufactures. Hamma cables start with the highest quality of manufacture . This makes Hamma in the raising ultimate Material cable: unique 316 Stainless Steel. same size. This means that you can downsize the structural cable can be significant on large stainless steel source follow by unique descaling of stainless steel rod corrosion resistance for extreme severe local conditions as projects. and maintain the strength. This results in improved aesthetics, less : 1mm - 10mm. Size harsh and Material : 316 Stainless Steel the drawing process to ensure wire Strudyna is proud to during offer Hamma Strudyna's stages during to remove impurities, which may have attached transport,cables prior to as part wellof as increased tensile work life Types due Multiple to the multiple annealing processes, weight in the structure, and cost savings on smaller fittings, which :annealing 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible). Sizes : 0.8mm 19mm : Compact Types wire strand in 1x19, an 1x25 exclusivel y forofhigh does not work harden, and finished by projects. passing1x7, through ultrasonic can be significant onconstructions large commencing production.cable systems. Hamma cables are develope d ensuring longevity the wire. Hamma cables are ensured of superior Types : 316: Stainless 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible) Material Steel High tensile systems finish due from to an excellent surface brightness and smooth tensile performances through unique techniquesaesthetic that differentiate bath to remove any impuritie that may corrosion have attache d rods during Application: Balustrades, shade sails, s foliage trellises, Finish : Bright and smooth for increased resistance. Sizes : 1.6mm 12mm Compact wire strand in constructions 1x7, 1x19, 1x25 Types : 1x19 (rigid), Types 7x7 (semi-flexible), 7x19 (flexible) and rigging. other manufactures. Hamma cables start with exterior. the highest quality of manufacture .: architectural This makes Hamma cable unique in raising ultimate FinishMaterial : Bright and smoothSteel for increased corrosion resistance. 316 Stainless : Application: Balustrades, shade sails, trellises, andconditions as stainless steel source follow by unique descaling of stainless steel rod corrosion resistance extreme harshfoliage and severe local : 1.6mm for - 12mm Code: Sizes Predominantly MFW... architectural rigging. used forfor structural cables, e.g resistance. glassprocesses, facades to remove impurities, which may have attached during transport, prior to Application: well as increased work due to the multiple annealing Finish : Bright and life smooth increased corrosion Recommended for exterior use inwith coastal areas. Material Test Certs available on request order. commencingStrudyna production. ensuring longevity of the wire. Hamma cables are ensured of superior is proud to offer Hamma cables as part of Strudyna's tensile Multiple annealing stages during the drawing process to ensure wire Specific features:(MST), Application: Predominantly used Breaking for structural cables, e.g glass facades with Micro-stretch Technologies. Benefits - Built with yMicro Stretch Technology the Code: MFW...U cable systems. Hamma cables are develope d exclusivel for high does not work harden, and finished by passing through ultrasonic aesthetic finish due to Minimum an excellent surface brightness smooth Maintenance: Wire rope must be cleaned & maintained regularly. Extremely non-flexible. -wire Smooth clean finish.anand Strength (MBS) is 20-30%-higher than conventional 1x19 of the Types :strain. 1x19impuritie (rigid), (semi-flexible), 7x19d(flexible) tensile performances through unique techniques that differentiate from exterior. to remove any that may have during Specific features: -bath High breaking -s7x7 No pre-stress required. See ourWire Maintenance & Cleaning guidelines onattache p.21. Maintenance: rope must be cleaned & maintained regularly. 1x7 1x19 same size. This means that you can downsize the structural cable - Extremely non-flexible. Smooth clean other manufactures. Hamma cables start with the highest quality of manufacture . low Thisstretch. makes Hamma -cable unique in finish. raising ultimate Extremely and maintain the strength.- This results in improved aesthetics,&less See our strain. Maintenance Cleaning guidelines on p.21. - High breaking - No pre-stress required. stainless steel source follow by unique1x7 descaling of stainless steel rod corrosion resistance for extreme harsh and severe local conditions as 1x19weight in the structure, and cost savings on smaller fittings, which - Extremely to remove impurities, which may have attached during prior on to largewell as increased low workstretch. life due to the multiple annealing processes, can transport, be significant projects. commencing production. ensuring longevity of the wire. Hamma cables are ensured of superior -finish Designed for large structural projects. To date this is the largest Benefits - Built withdue Micro Stretch Technology (MST), the Minimum Breaking aesthetic to an excellent surface brightness and smooth Types inBenefits constructions 1x7, 1x19, 1x25 : Compact wire strand Types : steel 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible) stainless on the market. Material : 316 Stainless Steel Strength (MBS) isstrand 20-30% higher than conventional 1x19 wire of the Benefits exterior. - Enhanced corrosion resistance. Produced with a high level Sizes : 1.6mm - 12mm same size. This means thatremoval you can the structural cable descaling and ultrasonic ofdownsize impurities. Benefits -: Enhanced corrosion Produced with a high level High tensile rods systems Types ofcorrosion A conventional 1x37resistance. and 1x61 construction wire stand. 1x19 7x7 7x19 Finish : Bright and smooth for increased resistance. and of maintain the strength. This results improved aesthetics, less in longer lasting shine and ultimate corrosion descaling and ultrasonic removal of in impurities. MaterialResulting : 316 Stainless Steel 1x19 7x7 7x19 weight ine.g the structure, and cost savings on smaller fittings, which in longer lasting shine and ultimate corrosion resistance, better for NZ’s harsh corrosive conditions. Application: Predominantly used forSizes structural cables, glass facades : Resulting 20mm - 42mm. be significant onfor large projects. resistance, better NZ’s harsh corrosive conditions. High tensile rods systems Benefits - : Built with Micro Stretch Technology (MST), the Minimum Breaking Finish can Bright and smooth for increased corrosion resistance. Specific features: Material : 316 Stainless Steel isprojects, Strength (MBS) 20-30% higher conventional 1x19 wire of the Application: Large structural such asthan bridges. - Extremely non-flexible. Smooth clean finish. Material : 316 Stainless Steel Compact wire strand in that constructions 1x7, 1x19, 1x25 Types same size. This means you can downsize the structural cable Sizes : : 0.8mm - 19mm Strudyna is proud tensilestrain. Multiple stages during the drawing process to ensureaesthetics, wire Specific features: - High breaking - Noannealing pre-stress required. Sizes : and 0.8mm -7x7 19mm 1x7 to offer 1x19 Hamma cables as part of Strudyna's maintain the strength. This results in improved less Material 316 Stainless Steel Types : : 1x19 (rigid), (semi-flexible), 7x19 (flexible) - Low stretch. - Extremely :harden, 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible) cable systems. Hamma cables are develope d exclusivel y for low highstretch. doesTypes not work and byand passing through an ultrasonic weight in thefinished structure, cost savings on smaller fittings, which Finish : : Bright and smooth for increased corrosion resistance. 1.6mm 12mm Sizes - Higher comparative breaking strain. Finish : Bright and smooth for increased corrosion resistance. can be significant onthat large projects. tensile performances that as differentiate from tensile bath toMultiple remove any impuritie sfor have attache d during Strudynathrough is proudunique to offertechniques Hamma cables part of Strudyna's annealing stages during the may drawing process to ensure wire Finish : -Bright and smooth increased corrosion resistance. Wide cable size range. cable systems. cableswith are the develope d exclusivel y for high does Balustrades, workmakes harden, and finished byand passing through ultrasonic other manufactures. Hamma Hamma cables start highest quality of manufacture This Hamma cable unique in raising Application: shade sails, foliage trellises, and an ultimate Compatible with both splicing swaging. -.not Application: Balustrades, shade sails, foliage trellises, and Types Compact wire strand in constructions 1x7, 1x19, 1x25 : Application: Predominantly used fors structural e.g glass facades through unique techniques thatsteel differentiate from bath to remove any impuritie that severe may cables, have d during architectural rigging. stainless steel tensile sourceperformances follow by unique descaling of stainless rod corrosion resistance for extreme harsh and localattache conditions as corrosion architectural rigging. Stainless resistance. Steel Material - Good : 316 other manufactures. Hamma cables start transport, with highest quality well of resistance. .work This makes Hamma cable inareas. raising ultimate Recommended for in unique coastal to remove impurities, which may have attached during prior to as manufacture increased dueexterior to exterior the use multiple processes, 1x37 1x61 Benefits - the Enhanced corrosion Produced with a high level Recommended for use inannealing coastal areas. Sizes : 1.6mm - life 12mm Specific features: with Micro-stretch Technologies. stainless steel source follow by unique descaling of of descaling stainless steel rod corrosion resistance for extreme harsh and are severe local conditions as and ultrasonic removal of of impurities. commencing production. ensuring longevity the Hamma ensured of superior Finish : Bright andwire. smooth for increased corrosion resistance. 1x19 7x7 7x19 -well Extremely non-flexible. - cables Smooth clean finish. Code: MFW...U Code: MFW...U to remove impurities, which may have attached during transport, prior tolasting as increased work life due to the multiple annealing processes, Resulting in longer shine and ultimate corrosion aesthetic finish due to an excellent -surface brightness and smooth -ensuring High breaking strain. Nocables pre-stress required. 1x7 1x19 Application: Predominantly usedHamma for structural cables, e.g glass facades commencing production. longevity of the wire. are ensured of superior resistance, better for NZ’s harsh corrosive conditions. Types :rope 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible) Maintenance: Maintenance: Wire Wire must be cleaned & maintained regularly. rope must be cleaned & maintained regularly. exterior. -aesthetic Extremely finishlow duestretch. to an excellent surface brightness and smooth SeeMaintenance our Maintenance & Cleaning guidelines p.21. Specific features: See our & 7x7 Cleaning guidelines onon p.21. : 1x19 (rigid), (semi-flexible), 7x19 (flexible) Material : 316 Stainless Steel exterior.Types - Extremely non-flexible. - Smooth clean finish. Sizes : 0.8mm - 19mm High (flexible) breaking strain. - No pre-stress required. 1x7 1x19 Types : 1x19 (rigid), 7x7 (semi-flexible),- 7x19 - Extremely stretch. Finish : Bright and smooth for increased corrosion low resistance. Benefits -with Designed for large structural projects. date this thelargest largest Benefits - -Built Micro Stretch Technology (MST), the Minimum Breaking Benefits Designed for large structural projects. To To date this is is the stainless steel strand on the market. Benefits Strength - Enhanced corrosion resistance. Produced with a high steel strand on the market. (MBS) is 20-30% higher than conventional 1x19level wire of the Benefits - Built with Stretch Technology (MST), the Minimum Breaking Application: Balustrades, shade sails, foliagestainless trellises, and Micro of descaling and ultrasonic removal ofconventional impurities. Strength is that 20-30% higher than 1x19 wire of the This(MBS) means you can downsize the structural cable architectural rigging. Types same: size. 1x19 7x7 7x19 A conventional 1x37 and shine 1x61 construction wire stand. Micro-stretch Micro-stretch Micro-stretchTechnologies Technologies Technologies Resulting in longer lasting and ultimate corrosion same areas. size. This means that you can downsize the structural cable Types :and A 1x37 and 1x61 construction wire stand. Recommended for exterior use in conventional coastal maintain the strength. This results in improved aesthetics, less Material : Enhanced 316 Stainless Steel Benefits corrosion resistance. Produced with a high level resistance, better for NZ’s harsh corrosive conditions. 1x7 1x19 1x25 and maintain the strength. This results on in improved aesthetics, less Material 316: Stainless Steel in the and cost savings smaller fittings, which Sizes :weight 20mm -structure, 42mm. Code: MFW...U of descaling and ultrasonic removal of impurities. 19.0 19.0 8.0 8.0 8.0 9.0 9.0 9.0 10.0 10.0 10.0 11.0 11.0 11.0 12.0 12.0 12.0 14.0 14.0 14.0 1x1916.0 16.0 16.07x7 19.0 weight in the structure, and cost savings on smaller fittings, which Sizes Finish :can 20mm - 42mm. 7x19 be significant on large : Resulting Bright and smooth forprojects. increased corrosion resistance. inSteel longeron lasting shine and ultimate corrosion can be significant large projects. Material : 316 Stainless :&Bright and structural smooth for increased resistance. Application: Large suchcorrosion as bridges. 5/16” 5/16” 5/16” 3/8” 3/8” 3/8” 7/16” 7/16” 7/16” Maintenance: Wire rope mustFinish be cleaned maintained regularly. resistance, better projects, for NZ’s harsh corrosive conditions. Sizes & Cleaning : Large 0.8mm - 19mm Application: structural such as bridges. : Compact wire strand in constructions 1x7,1x7, 1x19, 1x25 Types See our Maintenance onprojects, p.21. Types Compact wire strand in constructions 1x19, 1x25 : guidelines Specific: features: 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x25 1x25 1x25 1x25 1x25 1x25 1x25 1x25 1x25 Types 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible) Material : 316 Stainless SteelSteel Material :: 316 Stainless 316 Stainless Steel Material - Low stretch. Specific features: Finish : Bright and smooth for increased corrosion resistance. 36.19 36.19 36.19 46.48 46.48 46.48 57.49 57.49 57.49 71.20 71.20 71.20 84.73 84.73 84.73 113.586 113.586 113.586 150.63 150.63 150.63 188.29 188.29 188.29 1.6mm - 12mm Sizes Sizes :: 0.8mm - 19mm Sizes 1.6mm 12mm breaking strain. - stretch. Higher comparative - :Low :: comparative 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible) Finish Types Bright and smooth for increased resistance. Finish Bright and smooth for increased corrosion resistance. - Wide cable size range. - :Higher breaking strain.corrosion 6,500 6,500 6,500 9,000 9,000 9,000 10,250 10,250 10,250 13,500 13,500 13,500 14,400 14,400 14,400 19,300 25,600 25,600 32,000 32,000 32,000 19,300 19,300 25,600 Benefits - Designed for large structural To date this is the largest Application: Balustrades, shade foliage trellises, Finish projects. : Bright and smooth for increased corrosion and resistance. Compatible with bothsails, splicing and swaging. Wide cable size range. stainless steel strand on the market. Application: Predominantly used for structural cables, glassfacades facades Application: Predominantly used for structural cables, e.ge.g glass architectural rigging. 63.74 63.74 63.74 88.26 88.26 88.26 100.52 100.52 100.52 132.39 132.39 132.39 141.22 251.05 251.05 313.81 313.81 313.81 141.22 141.22 189.27 189.27 189.27 251.05 Good corrosion resistance. - Compatible with both splicing and swaging. with Ultimate Structural cable Application: Balustrades, shade sails, foliage Recommended for exterior use intrellises, coastaland areas. 1x37 1x61 Specific features: Types : A conventionalSpecific 1x37 and 1x61 construction wire stand. DIN DIN18800 18800 18800 *Z *Z *Z - Good corrosion resistance. features: R,D R,D R,DDIN with Micro-stretch Technologies. architectural rigging. - Extremely non-flexible.- Smooth - Smooth clean finish. Material : 316 Stainless Steel 1x37 1x61 non-flexible. finish. Code:- Extremely Recommended for exterior use clean in coastal areas. MFW...U - High breaking strain. No pre-stress required. Sizes : 20mm - 42mm. 1x7 1x19 - High breaking strain. - No- pre-stress required. 1x7 1x19 - Extremely low stretch. Finish : Bright and smooth for Code: increased corrosion resistance. MFW...U Maintenance: Wire rope must be cleaned & maintained regularly. - Extremely low stretch. Application: Large structural projects, such as bridges. Extreme Extreme ExtremeCondition Condition ConditionGear Gear Gear our rope Maintenance & Cleaning guidelines on p.21. Maintenance:SeeWire must be cleaned & maintained regularly. Specific features: See our Maintenance & Cleaning guidelines on p.21. 4.8 4.8 4.8 555 2.5 2.5 2.5 333 3.2 3.2 3.2 3.5 3.5 3.5 444 4.5 4.5 4.5 - Low stretch. - Higher comparative breaking strain. 1/8” 1/8” 1/8” 5/32” 5/32” 5/32” 3/16” 3/16” 3/16” Benefits - Enhanced corrosion resistance. Produced with a high level - Wide cable size range. Benefits - Enhanced - Designed for large structuralremoval projects. date thislevel is the largest of descaling andresistance. ultrasonic of To impurities. Benefits corrosion Produced with a high 7x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x191x19 1x19 1x19 1x197x7 1x19 and swaging. - Compatible with both splicing Benefits Designed for large structural projects. To date this is the largest steel strand on removal theshine market. Resulting in ultrasonic longer lasting and ultimate corrosion of stainless descaling and of impurities. - Good corrosion resistance. 1x19 7x7 7x19 stainless steel strand on the market. resistance, better for NZ’s harsh 3.09 3.09 3.09 4.45 4.45 4.45 5.06 5.06 5.06 6.06 6.06 6.06 7.88 7.88 7.88 10.01 10.01 10.01 11.39 11.39 11.39 12.39 12.39 12.39 Resulting in longer lasting shine andcorrosive ultimateconditions. corrosion 1x37 1x61 Types : A conventional 1x37 and 1x61corrosive construction wire stand. resistance, better for NZ’s harsh conditions. 525 525 525 756 756 756 861 861 861 1,030 1,030 1,030 1,340 1,340 1,340 1,702 1,702 1,702 1,935 1,935 1,935 2,100 2,100 2,100 Types :: A conventional 1x37 and 1x61 construction wire stand. Material 316 Stainless Steel Material : 316 Stainless Steel Material :: 316 Stainless Steel Sizes 0.8mm 19mm 5.15 5.15 5.15 7.41 7.41 7.41 8.44 8.44 8.44 10.1 10.1 10.1 13.14 13.14 13.14 16.69 16.69 16.69 18.98 18.98 18.98 20.59 20.59 20.59 SizesSizes: 316 : 20mm - 42mm. Material Stainless Steel :: 20mm - 42mm. Types 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible) Finish : Bright and smooth for increased corrosion corrosion resistance. Sizes : 0.8mm - 19mm Finish :: Bright and Finish Bright and smooth smooth for for increased increased corrosion resistance. resistance. Application: Large structural projects, as bridges. bridges. Application: Large structural projects,such such Types : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible)

HAMMA PRO-STRAND

Page 105

with Micro-stretch Technologies.

Anzor 316 Ultra Wire

HAMMA PRO-STRAND

HAMMA MEGA-STRAND

HAMMA X-STRAND

HAMMA X-STRAND HAMMA PRO-STRAND

with Micro-stretch Technologies.

HAMMA X-STRAND

with Ultimate Structural cable

Page 106

with Micro-stretch Technologies.

HAMMA PRO-STRAND

HAMMA PRO-STRAND HAMMA HAMMA PRO-STRAND MEGA-STRAND HAMMA HAMMA MEGA-STRAND X-STRAND HAMMA X-STRAND

HAMMA MEGA-STRAND

with Ultimate Structural cable

Page 107

with Micro-stretch Technologies.

HAMMA MEGA-STRAND

HAMMA X-STRAND HAMMA MEGA-STRAND HAMMA X-STRAND

HAMMA MEGA-STRAND

with Ultimate Structural cable

10 10 10

11.1 11.1 11.1

12 12 12

7/16” 7/16” 7/16” 1x19 1x19 1x19

1x19 1x19 1x19

12.7 12.7 12.7

14 14 14

1/2” 1/2” 1/2” 1x19 1x19 1x19

1x19 1x19 1x19

14.3 14.3 14.3

16 16 16

9/16” 9/16” 9/16”

5/8” 5/8” 5/8”

19 19 19

1x19 1x19 1x19

with Ultimate Structural cable

Page 108

with Ultimate Structural cable

8,400 8,400 8,400 10,574 10,574 10,574 12,102 12,102 12,102 13,555 13,555 13,555 16,473 16,473 16,473 17,186 17,186 17,186 20,500 20,500 20,500 30,300 30,300 30,300

82.38 82.38 82.38

103.7 103.7 103.7 118.68 118.68 118.68 132.93 132.93 132.93 161.54 161.54 161.54 168.54 168.54 168.54 201.04 201.04 201.04 297.14 297.14 297.14

106 30 30 30

1x37

1x61

Finish Specific : Bright and smoothshade for increased corrosion Application: Balustrades, sails, foliage trellises,resistance. and features: Specific features: architectural rigging. - Low stretch. - Low stretch. Recommended for exterior use in coastal areas. Application: Balustrades, shade sails, foliage trellises, and - Higher comparative breakingstrain. strain. - Higher comparative breaking architectural - Wide cable rigging. size range. Code: MFW...U - Wide cable size range. splicing swaging.areas. - Compatible with Recommended forboth exterior useand in coastal with both splicing and swaging. - Compatible - Good corrosion Maintenance: Wire roperesistance. must be cleaned & maintained regularly. - Good corrosion resistance. Code: MFW...U

See our Maintenance & Cleaning guidelines on p.21.

Maintenance:

Wire rope must be cleaned & maintained regularly. HAMMA MEGA-STRAND See our Maintenance & Cleaning guidelines on p.21. Benefits

Ultimate Ultimate UltimateStructural Structural Structuralcable cable cable 34 34 34

36 36 36

- Designed for large structural projects. To date this is the largest

stainless steel strand on the market. HAMMA MEGA-STRAND

42 42 42

Types : A conventional 1x37 and 1x61 construction stand. - Designed for large structural projects. To date wire this is the largest Online catalogue:Benefits www.anzor.co.nz/wire Material : 316steel Stainless Steel stainless strand on the market. Sizes

: 20mm - 42mm.

- Extremely non-flexible.

tensile 1x7 1x19performances

7x19

- Smooth clean finish.

Benefits - Built with Micro the Minimum through - unique techniques that fromStretch Technology bath to(MST), remove any Breaking impuri High breaking strain. - Nodifferentiate pre-stress required. Strength (MBS) is 20-30% higher than conventional 1x19 wire of th Extremely low stretch. other manufactures. Hamma cables start with the highest . This makes Ha samequality size. Thisof means thatmanufacture you can downsize the structural cable and maintain the strength. This results in improved aesthetics, less stainless steel source follow by unique descaling of stainless steel rod corrosion resistance for extrem weight in the structure, and cost savings on smaller fittings, which to remove impurities, which may have attached during transport, prior to on largewell as increased work life du can be significant projects. HAMMA X-STRAND commencing production.Benefits - Enhanced corrosion Types ensuring longevity of the wire. resistance. Produced with a high level wire strand in constructions 1x7, 1x19, 1x25 : Compact of descaling and ultrasonic removal of impurities. Material : 316 Stainless Steel aesthetic finish due to an ex Resulting in longer lasting ultimate corrosion ANZOR 316 WIRE: ROPE Sizes shine: and 1.6mm - 12mm 1x19 (rig resistance, better for NZ’s harsh corrosive conditions. exterior.Types : Bright and smooth for increased corrosion resistance.

Finish

with Micro-stretch Technologies.

316 Stainless Steel Application: Predominantly used for structural cables, e.g glass facades 0.8mm - 19mm Specific features: 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible) - Extremely non-flexible. - Smooth clean finish. Bright and smooth for increased corrosion resistance. - High breaking strain. - No pre-stress required. - Built with Micro Str - Extremely Balustrades, shade sails, foliage trellises,low andstretch. Benefits architectural rigging. Strength (MBS) is 2 Recommended for exterior use in coastal areas.

Code:

MFW...U

Anzor 316 Wire

1x19

7x7

Maintenance:

7x19

HAMMA PRO-STRA

Material : Sizes : Types : Finish : 1x7 1x19 Application:

same size. This mea maintain the st Benefits - Enhanced corrosion resistance. Produced with a high level weight in the struct Wire rope must be cleaned & maintained regularly. of descaling and ultrasonic removal of impurities. Material & Cleaning : 316Resulting Stainless See our Maintenance guidelines on p.21. can be significant o in Steel. longer lasting shine and ultimate corrosion Benefits - Wide range of sizes and configurations. HAMMA X-STRAND and - Economical pricing.

: 1mm - 10mm. resistance, better for NZ’s harsh corrosive conditions.

Size

HAMMA MEGA-STRAND : Types

1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible).

: Compact wire stran Material : 316 Stainless Steel Types - Designed for large structural projects. To date this is the largest Sizes : 0.8mm - 19mm Material : 316 Stainless Steel stainless steelApplication: strand on the market. Balustrades, sails, foliage7x19 trellises, Types : 1x19 (rigid),shade 7x7 (semi-flexible), (flexible) Sizes : 1.6mm - 12mm Finish : Bright and smooth for increased corrosion resistance. and architectural rigging. Types : A conventional 1x37 and 1x61 construction wire stand. Finish : Bright and smooth Material : K 316 Stainless Steel EX-STOC Application: Balustrades, shade sails, foliage trellises, and T EC Code: MFW... Sizes SUBJ : 20mm - 42mm. architectural rigging.Application: Predominantly used PR IOR FinishTO LE : Bright and smooth for increased corrosion resistance. Material Test Certs on in request order. SA Recommended foravailable exterior use coastalwith areas. Application: Large structural projects, such as bridges.

Benefits

Anzor 316 - Wire with Micro-stretch Technologies.

te Structural cable

Wire Rope 1x37

Size

1x61

2.0 mm 2.5 mm 3.0 mm 4.0 mm 5.0 mm 6.07x19 mm 8.0 mm

1x19

7x7

1x19

7x7

7x19

Load

340 kg 500 kg 720 kg 1,285 kg 2,000kg 2,876 kg 4,640 kg

1.0 mm 1.5 mm 2.0 mm 2.5 mm

60 kg 122 kg 235 kg 1x37 428 1x61 kg

2.0 mm 2.5 mm 3.0 mm 4.0 mm 5.0 mm 6.0 mm 8.0 mm 10.0 mm

230 kg 380 kg 540 kg 950 kg 1,490 kg 1,910 kg 3,400 kg 5,310 kg

with Ultimate Structural cable

1x19

Code: Specific features: MFW...U Specific features: Maintenance: Wire rope must be cleaned & maintained regularly. - Low stretch. Extremely Maintenance: See our Cleaning guidelines onnon-flexible. p.21. WireMaintenance rope must be & cleaned & maintained regularly. - Higher comparative breaking strain. High breaking See our Maintenance & Cleaning guidelines on p.21. strain. 1x19 - Wide cable1x7 size range. - Extremely low stretch. - Compatible with both splicing and swaging. Breaking - Good corrosion resistance. Characteristics

7x19

HAMMA MEGA-STRAND Benefits

- Designed for large structural projects. To date this is the largest stainless steel strand on the market.

HAMMA X-STRAND

- Rigid,Types non-flexible, stretch - ideal straight lines. : Alow conventional 1x37 in and 1x61 construction wire stand. - HigherMaterial comparative breaking : 316 Stainlessstrain. Steel

Benefits

- Enhanced corrosion and ult Resulting in longer resistance, better fo Cleaning &

: 20mm - FewerSizes crevices, traps less- 42mm. dirt, therefore less likely to `tea-stain’.

Finish : Bright and smooth for increased corrosion of resistance. descaling - Commonly used with swage fittings. Application: Large structural projects, such as bridges.

Specific features: - Low stretch. Maintenan ce - Higher comparative breaking strain. - Semi-flexible. is require d. - Wide cable size range. Material : 316 Stainless Steel - Low-medium-stretch. Compatible with both splicing and swaging. S e e p .2 1 Sizes : 0.8mm - 19mm - Good corrosion resistance. - Medium breaking strain.

Types Finish

: 1x19 (rigid), 7x7 (se : Bright and smooth

- Can be terminated with crimps, or can also be swaged.

- Very flexible. - Medium stretch. - Medium-low breaking strain.

Application: Balustrades, shade architectural rigging Recommended for

- Can be terminated with crimps, or can also be swaged.

Code: - More crevices so higher risk of to tea-staining. - Hardest to clean.

Maintenance:

MFW...U

Wire rope must b

Safe Working Load - to determine the safe working load of a wire rope or cable, the nominal strength orSee our Maintena Minimum Breaking Load (MBL) must be reduced by a safety factor. The MBL of a wire rope should be considered the straight line pull which will actually break the wire. The nominal strength or MBL of a wire rope should never be used as its working load.

HAMMA MEGA-STR Benefits

- Designed for large

Material

: 316 Stainless Steel

The safety factor is the ratio of strength of the rope or strand to the working load required. It is impossible to stainless steel stran establish a uniform safety factor as it will depend upon the type of work performed, government regulations, loads applied, speed of operation, length of wire rope used, etc. As a guideline, designers/installers commonly use a the Safe Working Load of 25% of Breaking Load, allowing for a 4:1 safety factor.Types : A conventional 1x3

It is the customer’s responsibility to ensure that an appropriate safety factor has been applied to the MBL to Sizes : 20mm - 42mm. calculate the safe working load of the wire rope being specified or ordered. We suggest that you engage Finish Bright and smooth a consulting engineer to assist you. Anzor takes no responsibility for the final decision, and accepts: no Application: Large structural pro liability in the case where loss arises from the safety factor chosen.

Online catalogue: www.anzor.co.nz/arch

107

Specific features: - Low stretch. - Higher comparative bre

to an excellent surface brightness and smooth Breakin Benefits aesthetic - Builtfinish withdue Micro Stretch Technology (MST), the Minimum Types : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible) exterior. Strength (MBS) is 20-30% higher than conventional 1x19 wire of samePRO-STRAND size. This means that you can downsize the structural cable HAMMA and maintain the strength. This results in improved aesthetics, le Strudyna is proud to offer Hamma assmaller part of Strudyna in the andtensile cost cables savings on whi Hamma cablesweight as part of structure, Strudyna's Multiple fittings, annealing Benefits Built with Micro Stretch Technology (MST), the Minimum Breakingy can be significant on large projects. cable systems. Hamma cables are develope d exclusivel

Strudyna is proud to offer cable systems. Hamma cables are develope d exclusivel y forhigher high does not Strength (MBS) is 20-30% than conventional 1x19 work wire of ha the tensile performances through unique techniques that differen same size. This means that you can downsize the structural cable : Compact that wire strand in constructions Types tensile performances through unique techniques differentiate from 1x7, 1x19, bath 1x25 to remove and maintain the strength. This results in improved aesthetics, less other manufactures. Hamma cables start with the highest ANZOR 316 ULTRA WIRE : 316 Stainless Steel other ROPE manufactures. Hamma Material cables start with the highest . This weight in the structure,quality and cost of savings onmanufacture smaller fittings, which 12mm Sizes : 1.6mm stainless steel source follow byprojects. unique descaling of stainless can -be significant on large stainless steel source follow by unique descaling stainless steel rod Finish : Bright andof smooth for increased corrosion corrosion resistance. resistan toTypes remove: impurities, which may have attached during transpo Compact wire strand in constructions 1x7, 1x19, to remove impurities, which may have attached during transport, prior to well1x25 as increased Application: Predominantly used for structural cables, e.g glass facades Stainless Steel Material : 316production. commencing commencing production. ensuring longevity Sizes : 1.6mm - 12mm Specific Strudyna is features: proud: to offer part of Strudyna's tensi Finish Bright and Hamma smooth forcables increasedas corrosion resistance. aesthetic finish d - Extremely non-flexible. - Smooth clean finish. Types cable systems. Hamma cables are develope d exclusivel y for hig Application: Predominantly used for structural cables, e.g glass facades exterior. Anzor 3161x7Ultra Wire - High breaking strain. - No pre-stress required. 1x19 tensile performances through unique techniques that differentiate fro - Extremely Specific features:low stretch. Higher corrosion resistance than standard 316 wire, due to the wire - Extremely non-flexible. - Smooth clean finish. other manufactures. Hamma cables start with the highest quality - High breaking strain. - No pre-stress required. 1x7 1x19 undergoing additional treatments. stainless steel -source follow by unique descaling of stainless steel ro Extremely low stretch. HAMMA X-STRAND to remove impurities, which may have attached during transport, prior Benefits - Built wi Strudyna is proud to offer Hamma cables as part of Strudyna's tensile Multiple Benefits - Enhanced corrosion resistance. Produced withannealing a high level stages commencing production. Strengt HAMMA X-STRAND of descaling and ultrasonic removal of impurities. cable systems. Hamma cables are develope d exclusivel y for high does not work harden, a 1x19 7x7 7x19 Resulting in longer lasting shine and ultimate corrosion Benefits that - Enhanced corrosionfrom resistance. Produced high level same tensile performances through unique techniques differentiate bath with to aremove any si im resistance, better NZâ&#x20AC;&#x2122;s harsh corrosive conditions. and ma of descaling andfor ultrasonic removal of impurities. 1x19 7x7 7x19 other manufactures. Hamma cables start with the Resulting highestin longer quality of shine and manufacture . This make lasting ultimate corrosion weight better for rod NZâ&#x20AC;&#x2122;s harsh corrosive conditions. Material : 316 Stainless stainless steel source follow by unique descaling of resistance, stainlessSteel steel corrosion resistance for e can be : 0.8mm - 19mm to remove impurities, which may have Sizes attached during transport, prior to well as increased work l : 316 Stainless TypesMaterial : 1x19 (rigid), 7x7 Steel (semi-flexible), 7x19 (flexible) Sizes : 0.8mm - 19mm commencing production. ensuring longevity of the Finish : Bright and smooth for increased corrosion resistance. Types : Compa Types : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible) aesthetic finish : due Finish : Bright and smooth for increased corrosion resistance. 316 to Staa Material Application: Balustrades, shade sails, foliage trellises, and Types : 1x1 exterior. Sizes : 1.6mm architectural rigging. Application: Balustrades, shade sails, foliage trellises, and Finish : Bright a architectural rigging. Recommended for exterior use in coastal areas. with Micro-stretch Technologies.

HAMMA PRO

with Micro-stretch Technologies.

Anzor 316 - Ultra Wire

MFW...U

Code:

MFW...U

Maintenance:

with Micro-stretch Technologies.

with Ultimate Structural cable

Cleaning & Maintenance is require d.

See p.21

Wire Rope

Size

0.8 mm 1.0 mm 1.5 mm 2.0 mm 2.5 mm mm 1x19 7x73.0 7x19 3.5 mm refer to p92 for 4.0 mm characteristics 4.5 mm 5.0 mm 6.0 mm 7.0 mm 1x61 with Micro-stretch Technologies. 1x37 7x7 8.0 mm 1x37 1x6110.0 mm 12.0 mm 14.0 mm 16.0 mm 19.0 mm

1x19

7x7

0.8 mm 1.0 mm 1.5 mm 2.0 mm 2.5 mm 3.0 mm 7x19 3.5 mm 4.0 mm 4.5 mm

Application: Predom

Wire rope must be cleaned & maintained regularly.

with Micro-stretch Maintenance: WireTechnologies. rope must be cleaned & maintained regularly. Specific features: Benefits - on Built with Micr SeeSee ourour Maintenance guidelines on p.21. Maintenance&&Cleaning Cleaning guidelines p.21.

- Extremely Strength (MBSn 1x19 High break same size. This -is is Extremely l and maintain Benefits Designed for large structural projects. To date this the largest Benefits - Designed for large structural projects. To date this the largest t *Breaking Size *Breaking stainless steel strand on the market. Wire Rope weight in the s stainless steel strand on the market. Load (Kg) Load (Kg) be signific Types : A conventional 1x37 wirecan stand. 53 5.0 and mm1x61 construction 1,620

HAMMA MEGA-STRAND HAMMA 1x7 MEGA-STRAND 1x19

HIGHLIGHTED SIZES IN STOC K. OTHE RS AVAILABLE ON REQUEST.

HAMMA PRO-ST

Recommended for exterior use in coastal areas.

Code:

Types

1x7

HAMMA X-S

: A conventional 1x37 and 1x61 construction wire stand.

Material : 316 Stainless Steel 84 6.0 mm 2,320 Material Stainless Steel Sizes : 316 : 20mm - 42mm. 189 7.0 mm Types 3,160 : Compact wire Sizes Finish : 20mm - 42mm. : Bright and smooth formm increased 3,670 corrosion resistance. with Micro-stretch Technologies. 336 8.0 Benefits - EnhancS Application: Material : 316 Stainless Large structural projects, such as bridges. Finish : Bright and smooth for increased corrosion resistance. 525 10.0 mm 5,750 Application: Large structural projects, such as bridges. of desc 1x19 7x7 7x19 756 12.0 mm 8,270 Sizes : 1.6mm - 12mm Specific features: 1x19 1,030 14.0 mm 1x7 11,200 - Low stretch. Resultin Finish : Bright and sm Specific features: 1,340 16.0 mmstrain.14,700 - Higher comparative breaking resistan Low stretch. 1,702 18.0 mm 21,000 - Wide cable size range. Application: Predominantly - Higher comparative breaking strain. 2,100 with both splicing and swaging. - Compatible - Wide cable size range. - Good corrosion resistance. 3,030 59 Material 1.0 mm : 316 Sta swaging. - Compatible with both splicing Specific 4,120 134 features: 1.5 mm and Sizes : 0.8mm 5,380 - Good corrosion resistance. 2.0 mm 239 - Extremely non-fle 8,400 2.5 mm 373 Types : 1x19 (ri High breaking stra 1x19 12,1021x7 3.0 mm 538 Finish : Bright a 16,473 731 - Extremely low stre 3.5 mm 1x19 7x7 7x19 20,500 956 4.0 mm 30,300 4.5 mm 1,206 Application: Balustra 1,490 5.0 mm architec 38 2,150 6.0 mm Recomm 59 7.0 mm 2,930 145 8.0 mm 3,400 258 - Enhanced corr 10.0 mm Benefits 5,310 Code: MFW...U 374 7,650 12.0 mm of descaling an 581 10,400 14.0 mm Maintenance: ResultingWire in lo 733 16.0 mm 13,600 1,030 19,300 18.0 mm resistance, beto See 1,312 20.0 mm 23,900

HAMMA X-STRA

HAMMA MEG

Material : 316 Stainless S Sizes : 0.8mm - 19mm Benefits Designe Types : 1x19 -(rigid), 7x *Refer to p.105 for our guidelines on Safe Working Loads. stainles Finish : Bright and sm

108

Online catalogue: www.anzor.co.nz/wire

Types Balustrades, : A conve Application: s Material : 316 Sta architectural ri Sizes Recommended : 20mm -

High tensile rods systems High tensile rods systems

Strudyna is proud to offer Hamma cables as part of Strudyna's tensile Multiple annealing stages during the drawing process to ensure wire cable systems. Hamma cables are develope d exclusivel y for high does not work harden, finished by the passing through an to ultrasonic Strudyna is proud to offer Hamma cables as part of Strudyna's tensile Multiple annealingand stages during drawing process ensure wire tensile performances through unique techniques that differentiate from bath todoes remove anyharden, impuritie that may have attache cable systems. Hamma cables are develope d exclusivel y for high not work ands finished by passing throughdanduring ultrasonic other manufactures. Hamma cables withtechniques the highest of from manufacture makes cable unique raising ultimate tensile performances throughstart unique thatquality differentiate bath .toThis remove anyHamma impuritie s that may in have attache d during stainless steel follow byHamma unique descaling of with stainless steel rod corrosion resistance. for andcable severe localinconditions as othersource manufactures. cables start the highest quality of manufacture Thisextreme makes harsh Hamma unique raising ultimate to remove impurities, which may follow have attached transport, prior tosteel rod well ascorrosion increased work lifefordue to theharsh multiple processes, stainless steel source by uniqueduring descaling of stainless resistance extreme and annealing severe local conditions as commencing production. ensuring longevity of the work wire. life Hamma cables are ensured of superior to remove impurities, which may have attached during transport, prior to well as increased due to the multiple annealing processes, aesthetic finish longevity due to an excellent surfacecables brightness and smooth commencing production. ensuring of the wire. Hamma are ensured of superior Types finish : 1x19 7x7 (semi-flexible), 7x19 (flexible) due (rigid), to an excellent surface brightness and smooth exterior.aesthetic : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible) exterior.Types

HAMMA 316 HIGH TENSILE CABLE

HAMMA PRO-STRAND HAMMA PRO-STRAND

HAMMA PRO-STRAND

Benefits - Built with Micro Stretch Technology (MST), the Minimum Breaking Benefits - Built with Micro Stretch Technology (MST), the Minimum Strength (MBS) is 20-30% higher than conventional 1x19 wireBreaking of the Strength 20-30% higher than conventional 1x19cable wire of the same size. This (MBS) meansisthat you can downsize the structural same size. meansThis thatresults you can structural less cable and maintain theThis strength. indownsize improvedthe aesthetics, maintain the strength. results improved aesthetics, weightand in the structure, and costThis savings oninsmaller fittings, whichless in theon structure, and cost savings on smaller fittings, which can beweight significant large projects. can be significant on large projects.

etch retch etch Technologies Technologies Technologies

1.0 .0 0

1x7 1x19 1x25 16.0 16.0 16.0

19.0 19.0 19.0

1x25 1x25 1x25

12.0 12.0 12.0

14.0 14.0 14.0

x19 19 19

1x19 1x19 1x19

1x25 1x25 1x25

1.20 20 20

150.63 150.63 188.29 188.29 188.29 84.73 84.73 84.73 113.586 113.586 113.586 150.63

: Compact wire strand in constructions 1x7, 1x19, 1x25 Types Types : Compact wire strand in constructions 1x7, 1x19, 1x25 Material : 316 Stainless Steel Material : 316 Stainless Steel Sizes : 1.6mm - 12mm Sizes : 1.6mm - 12mm Finish Finish : Bright and smooth for increased corrosion resistance. : Bright and smooth for increased corrosion resistance.

500 500 500 14,400 25,600 25,600 32,000 32,000 32,000 14,400 14,400 19,300 19,300 19,300 25,600

AVAILABLE TO ORDER

2.39 .39 .39 141.22 251.05 251.05 313.81 313.81 313.81 141.22 141.22 189.27 189.27 189.27 251.05 *Z *Z *Z DIN DIN18800 18800 18800 R,D R,D R,DDIN with Micro-stretch Technologies. with Micro-stretch Technologies.

1x7

Extreme Extreme ExtremeCondition Condition ConditionGear Gear Gear

3.5 .5 5

4.5 4.5 4.5

444

4.8 4.8 4.8

555

1x19 1x19 1x19

06 06 .06

7.88 7.88 7.88

10.01 10.01 10.01

METRIC 12.39 12.39 11.39 11.39 11.39 12.39

030 030 30

INCH 1x19 1,702 7x7 1,935 7x19 2,100 2,100 2,100 1,340 1,340 1,340 1,702 1,702 1,935 1,935

0.1 0.1 .1

INCH 20.59 18.98 18.98 18.98 20.59 20.59 13.14 13.14 13.14 16.69 16.69 16.69Construction Construction Limit Tension* (kN)

x19 19 19

1x19 1x19 1x19

1x19 7x7 METRIC

1x19 1x19 1x19

Micro-stretch Technologies HAMMA X-STRAND HAMMA X-STRAND

with Micro-stretch Technologies.

1x19 1x19 1x19

2” 2” /2”

1x19

3/16” 3/16” 3/16”

x19 x19 19

14 14 14

1x19 1x7

SpecificSpecific features: features: - Extremely non-flexible. - Smooth cleanclean finish. - Extremely non-flexible. - Smooth finish. - High -breaking strain.strain. - No -pre-stress required. High breaking No pre-stress required. - Extremely low stretch. - Extremely low stretch.

with Micro-stretch Technologies.

5/32” 5/32” 5/32”

2.7 2.7 .7

Application: Predominantly used for structural cables, e.g glass facades Application: Predominantly used for structural cables, e.g glass facades

Delivery approx 4 Weeks

2.0

2.5

7x19 5/64” 2.0

3.0

4.0

2.5

3.0

4.0 5/32”

5/64” 1x7

1x7

5/32” 1x7

1x7 2.60

1x7 4.06

1x7 5.88

1x7 10.47

min. Tension* Limit (kN) 2.60 4.06 5.88 10.47 (Kgf ) 450 700 1,025 1,795 14.3 14.3 14.3 16 16 16 19 19 19 Breaking min. kN)) ((Kgf 450 700 1,025 1,795 Load* 4.41 6.86 10.05 17.60 Breaking 9/16” 9/16” 9/16” 5/8” 5/8” 5/8” (kN) Load* 4.41 6.86 10.05 17.60 *For information on Safe Working Loads, 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19

1x19 14.36

1x19 1x19 1x19 1x19 1x19 1x19 20.89 28.89 36.19 46.48 57.49 71.20 Material : 316 Stainless Steel : 3166,500 Stainless Steel10,250 14.36 Material 20.89 Sizes 28.89 36.19 46.48 57.49 71.20 2,600 3,700 5,100 9,000 13,500 : 0.8mm - 19mm

Sizes

: 0.8mm - 19mm

1x25 1x25 113.586 150.63

1x25 188.29

84.73 113.586 150.63 14,400 19,300 25,600

1x19 84.73

188.29 32,000

: 1x19 88.26 (rigid), 7x7 (semi-flexible), 7x19 (flexible) 2,600 36.28 3,700 Types 5,100 6,500 10,250 13,500 14,400 19,300 25.50 50.01 63.74 100.52 132.39 7x19 141.22 189.27 25,600 251.05 32,000 313.81 Types : 1x19 (rigid),9,000 7x7 (semi-flexible), (flexible) Finish : Bright and smooth for increased corrosion resistance. 25.50 Finish 36.28 50.01 63.74 88.26 100.52 132.39 corrosion 141.22 189.27 251.05 : Bright and smooth for increased resistance. *ZR,D DIN313.81 18800

go to p.105.

555 555 ,555 16,473 16,473 16,473 17,186 17,186 17,186 20,500 20,500 20,500 30,300 30,300 30,300

2.93 2.93 .93 161.54 161.54 161.54 168.54 168.54 168.54 201.04 201.04 201.04 297.14 297.14 297.14

Micro-stretch Technologies

- Enhanced resistance. Produced with a16.0 high 6.0 Benefits 7.0- Enhanced 8.0 9.0 corrosion 10.0 11.0 Produced 12.0 14.0a 19.0 Benefits corrosion resistance. with high levellevel of descaling and ultrasonic removal of impurities. and ultrasonic removal of impurities. 5.0 6.0 7.0 of descaling 8.0 9.0 10.0 11.0 12.0 14.0 16.0 19.0 5/16” 3/8” 7/16” Resulting in longer lasting and ultimate corrosion Resulting in longer lasting shineshine and ultimate corrosion 5/16” 3/8” 7/16” 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x25 1x25 1x25 resistance, forharsh NZ’s harsh corrosive conditions. resistance, better better for NZ’s corrosive conditions. 5.0

Application: Balustrades, shade sails, foliage trellises, and *ZR,D DIN 18800 Application: Balustrades, shaderigging. sails, foliage trellises, and architectural architectural rigging. for exterior use in coastal areas. Recommended Extreme Condition Gear Recommended for exterior use in coastal areas. Code: Extreme Condition Gear MFW...U 4.5 4.8 5 1.6 Code: 2 2.4 MFW...U 2.5 3 3.2 3.5 4 &4maintained 2.5 Wire3rope must 3.2 be cleaned 3.5 4.5 regularly. 4.8 5 1.6 2 Maintenance: 2.4 5/32” 3/16” 1/16” 5/64” 3/32” 1/8” Maintenance: Wire rope must be cleaned & & Cleaning maintained regularly. See our Maintenance guidelines on p.21. 1/8” 5/32” 3/16” 1/16” 5/64” 3/32” 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 See our Maintenance & Cleaning guidelines on p.21.

METRIC

0.8

1.0

1.2

METRIC INCH

0.8

1.0

1.2 3/64”

1.5

INCH Construction

1x19

3/64” 1x19

1x19

Ultimate Ultimate UltimateStructural Structural StructuralLimit cable cable cable Construction Tension* (kN)

1x19 0.31

1x19 0.49

1x19 0.71

1x19 1. 11

1x19 1.27

min. Tension* Limit (kN) (Kgf ) 36 36 36 Breaking 42 42 42 min. kN)) ((Kgf Load Breaking (kN) Load 1x61 1x61 1x61 1x61 1x61 1x61

0.31 53

0.49 84

0.71 121

1. 11 189

1.27 215

53 0.52

84 0.82

121 1.19

189 1.85

stainless steelstructural strand 1,030 on the market. 483 525 756 861 1,340 1,702 1,935 2,100 215 Benefits 336 20.59 8.44 10.1 13.14 16.69 2.11 3.3 4.74 5.15 - Designed for7.41 large projects. To date this 18.98 is the largest

0.52

0.82

1.19

1.85

2.11

METRIC 672.00 672.00 672.00

5.5

6.4

7.2

METRIC INCH 114,208 114,208 114,208

56 66

601.98 601.98 601.98

61 11

98,606 98,606 98,606

967 967 967

1.5

5.5 7/32”

6.4 1/4”

7.2 9/32”

INCH Construction 1,120 1,120 1,120

7/32” 1x19

1x19

1/4” 1x19

1x19

9/32” 1x19

Construction

1x19

min. (Kgf ) Breaking min. kN)) ((Kgf Load Breaking (kNcable ) Load with Ultimate Structural

2,639

3,030

3,442

4,120

4,357

2,639 25.88

3,030 29.71

3,442 33.75

4,120 40.4

4,357 42.73

25.88

29.71

33.75

40.4

42.73

1x37

with Ultimate Structural cable

1x37

1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 6.06 7.88 10.01 11.39 12.39 1.98 HAMMA 2.84 3.09MEGA-STRAND 4.45 5.06 HAMMA 2.84 3.09 4.45 5.06 6.06 7.88 10.01 11.39 12.39 1.98 861 1,030 1,340 1,702 1,935 2,100 336 Benefits 483 MEGA-STRAND 525 756 - Designed for large structural projects. To date this is the largest

1x61

on the10.1 market. 4.74stainless 5.15 steel 7.41strand 8.44 13.14 16.69 18.98 20.59 Types : A conventional 1x37 and 1x61 construction wire stand. :10316 Stainless 8 Material 9.6 11.1 1x37Steel 12 12.7construction 14 14.3 16 19 Types : A conventional and 1x61 wire stand. Sizes: 316 Stainless : 20mm -Steel 42mm. Material 8 9.6 10 11.1 12 12.7 14 14.3 16 19 5/16” 3/8” 7/16” 1/2” 9/16” 5/8” : Bright and smooth for increased corrosion resistance. Sizes Finish : 20mm - 42mm. 5/16” 3/8” 1/2”such1x19 9/16” 5/8” 1x19 Application: 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 Large7/16” structural projects, as bridges. Finish : Bright and smooth for increased corrosion resistance. 1x19 Specific 1x19Large 1x19 1x19 projects, 1x19 such 1x19as bridges. 1x19 1x19 1x19 1x19 Application: structural features: - Low stretch. 5,380 7,746 8,400 10,574 12,102 13,555 16,473 17,186 20,500 30,300 Specific features: - Higher comparative breaking strain. 5,380 - 75.96 7,746 8,400cable 10,574 12,102 13,555 161.54 16,473 168.54 17,186 201.04 20,500 297.14 30,300 Low stretch. 52.76 82.38 103.7 118.68 132.93 - Wide size range. Higher comparative breaking strain. with both splicing swaging. - Compatible 52.76 - 75.96 82.38 103.7 118.68 132.93and 161.54 168.54 201.04 297.14 - Wide- cable range.resistance. Goodsize corrosion - Compatible with both splicing and swaging. - Good corrosion resistance. 3.3

Ultimate Structural cable

1x61

METRIC

24.3

METRIC INCH

24.3

INCH Construction

1x37

1x61

Construction Limit Tension (kN)

1x37 197.40

1x37 240.60

1x37 274.32

1x37 375.72

1x61 465.78

197.40 31,713

Ultimate Structural cable 36

1x61

1x61 568.56

1x61 601.98

1x61 672.00

601.98 98,606

672.00 114,208

98,606 967

114,208 1,120

240.60 274.32 375.72 465.78 568.56 38,647 46,499 63,630 78,824 96,261 Online catalogue: www.anzor.co.nz/wire

31,713 38,647 46,499 63,630 78,824 311 Information 379 456 624 of Strudyna 773 used exclusively under permission Co. Ltd

96,261 944

109

Application: Balustrades, shade sails, foliage trellises, and Benefits - Enhanced corrosion resistance. Produced with a high level architectural rigging. of descaling and ultrasonic removal of impurities. Recommended for exterior use in coastal areas. Micro-stretch Technologies in longer lasting shine and ultimate Benefits Resulting - Enhanced corrosion resistance. Produced with corrosion a high level resistance, better for NZ’s harsh corrosive conditions. Code: Micro-stretch Technologies MFW...U of descaling and ultrasonic removal of impurities. 19.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 16.0 2.5 3.0 12.0 14.0 Resulting in longer lasting shine and ultimate corrosion Maintenance: Wire rope must be cleaned & maintained regularly. 5/32” 5/16” 3/8” 7/16” 19.0 4.0 5.0 6.0 7.0 : 316 8.0 9.0 Steel 10.0for NZ’s 11.0 harsh 16.0 2.5 3.0 12.0 14.0conditions. Material Stainless resistance, better corrosive See our Maintenance & Cleaning guidelines on p.21. 1x19 1x19 1x19 1x25 1x25 1x7 1x7 1x7 1x19 Sizes 1x19 1x19: 0.8mm 1x19 - 19mm 1x19 1x25 5/32” 5/16” 3/8” 7/16” : 316 Stainless Steel TypesMaterial : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible) 28.89 36.19 46.48 57.49 71.20 150.63 188.29 4.06 5.88 10.47 14.36 20.89 84.73 1x19 1x19 1x19 1x25 1x25 1x7 1x7 1x7 1x19 1x19 1x19 1x19 1x19 113.586 1x25 : 0.8mm - 19mm FinishSizes : Bright and smooth for increased corrosion resistance. Types : 1x19 (rigid), 7x7 (semi-flexible), 7x19 (flexible) 2,600 3,700 5,100 6,500 9,000 10,250 13,500 25,600 32,000 700 1,025 1,795 14,400 19,300 28.89 36.19 46.48 57.49 71.20 4.06 5.88 10.47 14.36 20.89 84.73 113.586 150.63 188.29 Benefits - Designed for large structural To date is thefor largest Finish projects. : Bright andthis smooth increased corrosion resistance. Application: Balustrades, shade sails,13,500 foliage141.22 trellises, and 25,600 313.81 10.05 stainless 17.60 25.50 36.28 50.01 63.74 100.52 132.39 251.05 32,000 6.86 189.27 2,600 3,700on the 5,100 6,500 88.26 9,000 10,250 700 1,025 1,795 14,400 19,300 steel strand market.

HAMMA X-STRAND

with Micro-stretch Technologies.

1x19

7x7

7x19

with Micro-stretch Technologies.

1x19METRIC 7x7

7x19 2.0

INCH METRIC

5/64” 2.0

Construction INCH

1x7 5/64”

min. Tension* (Kgf ) Limit (kN) Breaking ( kN ) min. Load* (Kgf ) Breaking (kN) Load*

450 2.60

2.60 Limit Tension* 1x7TENSILE Construction HAMMA 316 (kN) HIGH HAMMACABLE MEGA-STRAND 4.41 450

architectural rigging.

INCH METRIC

0.8

Construction INCH

1x19

Limit Tension* (kN) Construction

0.31 1x19

min. Tension* (Kgf ) Limit (kN) Breaking 1x37 1x61 ( kN ) min. Load (Kgf ) Breaking (kN) Load

53 0.31

*Z DIN313.81 18800 Balustrades, foliage trellises, and 251.05 17.60 25.50 36.28 Application: 50.01 63.74 88.26 shade 100.52 sails, 132.39 141.22 189.27 A conventional 1x37 and 1x61 construction wire stand. Recommended exterior use in coastal areas. R,D architectural for rigging. DIN 18800 *Z 316 Stainless Steel Recommended for exterior use in coastal areas. R,D MFW...U 20mm - 42mm. Code: Bright and smooth for Code: increased corrosion resistance. Extreme Condition Gear MFW...U Maintenance: Wire rope must be cleaned & maintained regularly. Large structural projects, such as bridges. Condition Gear rope must &Extreme See our Maintenance &3.5 Cleaning guidelines on 2 Maintenance: 2.4 2.5 Wire 3 3.2 be cleaned 4maintained 4.5 regularly. 4.8p.21. 5 1.0 1.2 1.5 1.6 Specific features: See our Maintenance & Cleaning guidelines on p.21. 3/16” 1/16” 5/64” 3/32” 1/8” 5/32” 3/64” 5 2 2.4 2.5 3 3.2 3.5 4 4.5 4.8 1.0 1.2 1.5 1.6 - Low stretch. - Higher comparative strain. 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 breaking 1x19 1x19 1x19 1x19 3/16” 1/16” 5/64” 3/32” 1/8” 5/32” 3/64” - Wide cable size range. Benefits - Designed for structural date this largest 4.45large 5.06 6.06 projects. 7.88 To 10.01 11.39 12.39 0.49 0.71 1.11 with 1.27both 1.98 2.84 3.09 1x19 1x19 1x19 1x19is the 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 splicing and swaging. - Compatible Benefits - Designed for large structural projects. To date this is the largest stainless steel strand on the market. - Good 1.11 corrosion resistance. 483 525 756steel 5.06 861 1,030 1,340 1,702 1,935 2,100 84 121 189 215 336 stainless strand on the market. 4.45 6.06 7.88 10.01 11.39 12.39 0.49 0.71 1.27 1.98 2.84 3.09

0.52 53

0.82 84

1.19 121

1.85 189

0.52

0.82

1.19

1.85

METRIC

5.5

6.4

INCH METRIC

7/32” 5.5

1/4” 6.4

Construction INCH

1x19 7/32”

1x19

1x19 1/4”

1x19 1x19

4.41

6.86

10.05

Types : Material : Sizes : Finish : Application:

HAMMA MEGA-STRAND METRIC 0.8

Construction min. (Kgf ) Breaking kN ) min. with Ultimate Structural Load ((Kgf cable) with Ultimate Structural cable Breaking (kN) Load

HAMMA MEGA-STRAND

1x19

2,639

3,030

3,442 4,120 TO ORDER

25.88 2,639

29.71 3,030

Delivery 33.75 40.4 3,442 4,120 Weeks

25.88

29.71

33.75

1x37

AVAILABLE approx

1x37

1x61

40.4

1x61

20.59 3.3 4.74 5.15 7.41 8.44 10.1 13.14 16.69 18.98 483 525 756 1x37 861 and1,030 1,340 1,702 1,935 2,100 336 Types 1x61 construction Types : A conventional : A conventional 1x37 and 1x61 constructionwire wire stand. stand. Material Stainless 18.98 20.59 3.3 Material 4.74: 316 7.41 Steel 8.44 10.1 13.14 16.69 :5.15 316 Stainless Steel SizesSizes : 20mm - 42mm. : 20mm - 42mm. 7.2 8 9.6 10 11.1 12 12.7 14 14.3 16 19 FinishFinish : Bright andand smooth forfor increased : Bright smooth increasedcorrosion corrosionresistance. resistance. 9/32” 5/16” 3/8” 7/16” 1/2” 9/16” 5/8” 7.2 8 Application: 9.6 Large 10 11.1 12 12.7 14 14.3 16 19 Application: Large structural projects, such bridges. structural projects, such asas bridges. 2.11 215 2.11

1x19 9/32”

1x19 Specific 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 5/16” 3/8” features: 7/16” 1/2” 9/16” 5/8” Specific features: Low stretch. 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 1x19 -1x19 Low stretch. - Higher comparative breaking strain. -7,746 Higher comparative breaking strain. 4,357 5,380 8,400 10,574 12,102 13,555 16,473 17,186 20,500 30,300 - Wide cable size range. - Wide cable size range. 42.73 52.76 75.96 82.38 103.7 118.68splicing 132.93 161.54 168.54 297.14 with 12,102 both swaging. 4,357 5,380 7,746 - Compatible 8,400 10,574 13,555and 16,473 17,186 201.04 20,500 30,300 - Compatible with both splicing and swaging. - Good corrosion resistance. 42.73 52.76 75.96 82.38 103.7 118.68 132.93 161.54 168.54 201.04 297.14 - Good corrosion resistance.

Ultimate Structural cable

METRIC

24.3

INCH METRIC

24.3

Ultimate Structural cable 36 36

42 42

Construction INCH

1x37

1x61

Limit Tension (kN) Construction

197.40 1x37

240.60 1x37

274.32 1x37

375.72 1x37

465.78 1x61

568.56 1x61

601.98 1x61

672.00 1x61

min. Tension(Kgf ) Limit (kN) Breaking kN)) min. Load* ((Kgf Breaking (kN) Load*

31,713 197.40

38,647 240.60

46,499 274.32

63,630 375.72

78,824 465.78

96,261 568.56

98,606 601.98

114,208 672.00

311 31,713

379 38,647

456 46,499

624 63,630

773 78,824

944 96,261

967 98,606

1,120 114,208

624

773

944

967

1,120

311 456 *For information on Safe Working379 Loads, go to p.105.

110

Online catalogue: www.anzor.co.nz/wire-rigging Information used exclusively under permission of Strudyna Co. Ltd

glass canopy system

DIVIDER INSERT HERE:

anzor glass canopy system glass canopy system

CANOPY SYSTEM OVERVIEW

Glass Canopy System Anzor’s Canopy System is an attractive canopy solution for modern buildings. It is made from quality 316 Stainless Steel and comes with a Producer Statement for use in New Zealand.

PS1 producer statement - AVAILABLE ON Request for further information visit: www.anzor.co.nz/arch/producer-statements

STRUDYNA

eco-cANOPY “ An alternative solution for a modern building style ”

Information used exclusively under permission of Strudyna Co. Ltd

113 eco-CAnopy

CANOPY SYSTEM ASSEMBLY

GLASS canopy system Assembly EX-STOCK SUBJEC T TO PR IOR SALE

Tensio n Ro d

Mad e to or d e r

NB: For the T-Wall and B-Wall Brackets Dome nuts are available for purchase to cover the end of the stud.

No.

Name

T-Wall bracket

Tension rod*

Product Code Grade ASDCTWB612120

Size

Surface

Description

316

120mm x M12

Satin finish

Drilled for M12 rod & wall bolts.

316

12mm x 940mm

Satin finish

Connecting Rod for M12, length 940mm.

316

12mm x 1500mm

Satin finish

Connecting Rod for M12, length 1500mm.

Glass mounting ASDCGM612070

316

M12 x 70mm

Satin finish

Drilled for M12mm rod,12-20mm glass.

B-Wall bracket

316

120mm x M12

Satin finish

Drilled for M12 wall bolts, 12-20mm glass.

ASDCBWB612120

*Tension rods are supplied with L/H & R/H hex locking nuts. *Tension rods made to order. Delivery approx. 1 week.

NEED FASTENERS? See our complete range of fasteners at the back of this catalogue pg.138

114

LOCTITE We recommend applying Loctite 243 to all screws & nuts for permanent fixture.

Online catalogue: www.anzor.co.nz/glass-canopy www.anzor.co.nz/arch Information used exclusively under permission of Strudyna Co. Ltd

CANOPY SYSTEM ASSEMBLY

GLASS LAYOUT Designed to meet PS1 Producer Statement requirements.

L1 300

300 Indoor Outdoor

300

Ø18

Glass Thickness (mm)

Dimensions (mm)

Estimated Weight (kgs)

Tempered

Laminated

Tempered

Laminated

13.52

1,800

1,200

805

15.52

2,000

1,400

1,200

805

17.52

2,100

1,500

1,200

805

101

111

2,100

1,500

1,200

805

126

GLASS THICKNESS • The fittings have the capability of handling 12-20mm glass thickness.

• PS1 Producer Statement available on request.

Contractor: Glass Relate Ltd, Auckland.

Online catalogue: www.anzor.co.nz/glass-canopy www.anzor.co.nz/arch Information used exclusively under permission of Strudyna Co. Ltd

115

CANOPY SYSTEM DIMENSIONS

ROD dimensions

Installation Rod 940mm

Installation Rod 1500mm

No.

Product

Product Code

Material

Qty

T-Wall Bracket

ASDCTWB612120

316

Tension Rod

Rod made to order

316

Glass Mounting

ASDCGM612070

316

B-Wall Bracket

ASDCBWB612120

316

Glass supplied by others

Glass

Canopy system components 1. T-Wall Bracket

2. Tension Rod

Ø12mm 57 .5

120

ØM12

3. Glass Mounting

L - Rod Length 940mm & 1500mm - Made to order

4. B-Wall Bracket T - Glass Thickness 12-20mm

Ø 70

57.5

Ø 70 47

Ø 120

ØM

116

T - Glass Thickness 12-20mm

100

Online catalogue: www.anzor.co.nz/glass-canopy www.anzor.co.nz/arch Information used exclusively under permission of Strudyna Co. Ltd

INSTALLATION NOTES

installation notes T-Wall Bracket

B-Wall Bracket Fixings to building and the capacity of the building for the canopy loads to be designed by others. 604mm MIN

Glass Mounting Bracket

m 1.5

1.2 m

m 0m

Glass Canopy designed by others

Notes: Design Loads (as per table 3.2 of AS/MZS 1170.1:2002): Maximum live loads are: Uniform load to canopy surface 1.5kPa Concentrated load anywhere 1.8kN Maximum wind speed is 50 m/s (â&#x20AC;&#x153;VERY HIGHâ&#x20AC;? as defined in NZS 3604:1999) The design/drawing does not consider the glass canopy (or other material), nor does it consider the fixings to the building or the capacity of the building structure. These must be specifically considered for each installation. The mounting brackets must be installed in accordance with the information shown and described within pages 111 to 115.

PS1 producer statement - AVAILABLE ON request for further information visit: www.anzor.co.nz/arch/producer-statements

Online catalogue: www.anzor.co.nz/glass-canopy www.anzor.co.nz/arch

117

spiders for glass facades

DIVIDER INSERT HERE: Spider fittings

spiders for glass facades

GLASS SPIDERS

structural dynamicS - glass spiders Structural Dynamics is a world leader in designing, engineering and supplying glass facade systems. Structural Dynamics engineered and manufactured the truss and spider system for the glass façade of the New International Bangkok Airport. This is one of the world’s largest glass façades at around 1km long and 40m high.

WHAT ANZOR STOCKS Spiders – we stock Structural Dynamics Glass `Spyders’ designed for small-to-medium sized projects. Rod and wire tensioning systems – we also stock rod bracing and wire tensioning components which can be incorporated to support a glass façade structure. For more information, see `Tension Rod’ (p.77) and `Wire Rigging’ (p.93) sections. Spiders, rod & wire rigging systems for large projects - available on request and made to order.

WHY SPECIFY STRUCTURAL DYNAMICS SPYDERS? •

High Quality - manufactured by a leader in stainless steel components for glass façade structures. Structural Dynamics have proven themselves in designing and manufacturing the truss and spider systems for many major projects. We are supplying an increasing number of New Zealand projects.

•

Fully strength tested with performance data available.

•

High corrosion resistance – they are made from 316 Stainless Steel, which is then passivated for additional corrosion resistance.

•

Timely delivery - stocks are held in Auckland, and additional stock can be sought with reliable delivery times.

•

Competitively priced.

Design notice: The information provided herein are to be used as design recommendations only. Structural Dynamics and its affiliate agents (Anzor) does not assume any responsibility for any injury and/or damage to property or person as a matter of negligence or otherwise, or from any use or operation of any methods, instructions, products or ideas contained in these drawings.

Online catalogue: www.anzor.co.nz/arch

121

4 LEG SPIDER

4 leg - YB41 SPIDER

EX-STOCK SUBJEC T TO PR IOR SALE

Product Code: ASDSPYB41CSS200

Performance data 4 Leg 200 x 200mm Spider - with M14 standard Rotule

200

Free Hole Connection

Spider hole configuration

Slotted Hole Connection

The 4-leg spider has 2 `freeâ&#x20AC;&#x2122; holes, and 2 slotted holes.

200 M14

The two slotted holes on the bottom support the dead load (self weight from the glass below), positive wind load and negative wind load. The two free holes on the top are attached to the 2 pieces of glass that are above the spider, supporting positive and negative wind loads.

Fasteners to connect spiders to rods P2

RD Eyenut Connector

P1 P3

P1: Allowable negative wind pressure

2300N

P2: Allowable wind pressure

2500N

P3: Spider allowable dead load

1300N

P4: Rotule allowable dead load

1262N

NOTE: the analytic load is for an individual leg of spider, each leg receives the equivalent load. Yield Stress = 241 Mpa. Allowable Stress = 0.7 x 241=168.7 MPa.

RD Eyenut CNT Bolt

Sold separately - available on request

122

PLEASE NOTE: Rotules are a separate component. See p.124 for more details.

Online catalogue: www.anzor.co.nz/spider www.anzor.co.nz/arch fittings Information used exclusively under permission of Strudyna Co. Ltd

2 LEG SPIDER - 45° & STRAIGHT

EX-STOCK SUBJEC T TO PR IOR SALE

2-LEG - YB21 45 DEGREE SPIDER Product Code: ASDSPYB21CCN200

100

200

100

Ø26

100

EX-STOCK SUBJEC T TO PR IOR SALE

2-LEG - YB21 STRAIGHT SPIDER Product Code: ASDSPYB21HVC200

100

200

Ø26

Online catalogue: www.anzor.co.nz/spider-fittings www.anzor.co.nz/arch Information used exclusively under permission of Strudyna Co. Ltd

123

2 LEG SPIDER FOR GLASS FINS

2 LEG - YA24 - LH & RH SPIDER FOR GLASS FINS Product Code: ASDSPYA24NNS200 (LH), ASDSPYA24CSN200 (RH - slotted hole) EX-STOCK SUBJEC T TO PR IOR SALE

REQUIRES:

200

2 x M14 x 90 Spyder Double Lock Bolts Product Code: ASDSPDLBM14 X 9

Glass Fin

14.5

26.5

REQUIRES: 2 x M14 x 90 Spyder Double Lock Bolts.

200

Product code: ASDSPDLBM14 X 9

1 x 14mm x 170 PWP1 Spyder Washer Plate. Product code: ASDSPYPWP1L170

DID YOU KNOW Spiders can also be clamped either side of a steel cleat that is welded to the roof support structure.

124

14.5

26.5

Online catalogue: www.anzor.co.nz/spider www.anzor.co.nz/arch fittings Information used exclusively under permission of Strudyna Co. Ltd

1 LEG SPIDER FOR GLASS FINS

1 LEG - YA14 SPIder for glass fins Product Code: ASDSPYA1400HS90

EX-STOCK SUBJEC T TO PR IOR SALE

REQUIRES: 2 x M14 x 90 Spyder Double Lock Bolts

14.5

Product Code: ASDSPDLBM14 X 9

Glass Fin

REQUIRES: 2 x M14 x 90 Spyder Double Lock Bolts.

14.5

Product code: ASDSPDLBM14 X 9

1 x 14mm x 140 PWP1 Spyder Washer Plate. Product code: ASDSPYPWP1L170

Online catalogue: www.anzor.co.nz/spider-fittings www.anzor.co.nz/arch Information used exclusively under permission of Strudyna Co. Ltd

125

ROTULE & ROTULE TOOLS OCK E X-ST C T E SUB J IOR TO P R SA L E

ROTULE

Glass Thickness

Glass Hole Ø

Product code

AØ (mm)

BØ (mm)

C (mm)

M12

10-15mm

33.5mm

ASDSPR126050

M14

12-16mm

37.5mm

ASDSPR147662

M16

16-21mm

43.5mm

ASDSPR168570

Size

OCK E X-ST C T E SUB J IOR TO P R SA L E

F E

D (mm)

E (mm)

FØ (mm)

ROTULE COUNTERSUNK

F D

Size

Glass Thickness

Glass Hole Ø

Product code

AØ (mm)

BØ (mm)

C (mm)

D (mm)

E (mm)

FØ (mm)

M14

12-16mm

37.5mm

ASDSPR147662

ROTULE TOOLS All four tools are required for proper installation of rotule sizes M12 - M16. OCK E X-ST C T E SUB J IOR TO P R SA L E

RTT4

RTT3

RT T1

RT T2

RT T3

RT T4

RTT1 The insert secures the ball joint of the centre shaft.

RTT2

126

A different size is required for each of M12, M14 & M16

Online catalogue: www.anzor.co.nz/spider www.anzor.co.nz/arch fittings Information used exclusively under permission of Strudyna Co. Ltd

foliage systems

DIVIDER INSERT HERE: Foliage Systems

foliage systems

FOLIAGE SYSTEM OVERVIEW

Modernise A WALL OR FENCE BY GROWING FOLIAGE OVER A STAINLESS STEEL WIRE TRELLIS

This stainless steel wire system provides a flexible and permanent trellis that makes featureless walls and fences come to life. BENEFITS • • • • •

Strong, yet lightweight. Durable. 316 Stainless Steel components. Easy installation - only hand tools required. System can generally be configured to your working space.

POSSIBLE APPLICATIONS • • • • •

Fences, feature walls, pillars. Residential and commercial gardens. Tilt-slab walls. Growing a specific shape of pattern. Bridge sidings (protection against graffiti).

Not recommended for situations where there is a risk to the waterTightness of a building. E.g. PLASTER AND timber cladding.

Online catalogue: www.anzor.co.nz/foliage-systems

129

FOLIAGE SYSTEM COMPONENTS

FOLIAGE SYSTEM Components GR1025 +GR1051

GR1025

GR1025 +GR1051

GR1025 +GR1052

2 GR1046

GR1044 GR1046

GR1025 +GR1052

GR1044

GR1025 +GR1052

4 GR1025 +GR1052

GR1025 +GR1052 GR1025 +GR1051

GR1025 GR1025 +GR1051

GR1025

The example above shows a possbile scenerio measuring approx. 2.0m high x 2.5m wide. Recommended distance between the eyes is 500mm

Using a diagonal trellis construction, Anzorâ&#x20AC;&#x2122;s foliage system supports vines, climbers, and scrambling plants.

WIRE TYPE: lattice formation For the wire to be strung in a lattice formation as shown above. Use 3mm 7x19 316 flexible wire (see p.105)

WIRE TYPE: STRAIGHT when running wire in a straight line with no bends.

For a list of items and stock codes

GR1044

See page 126 119

GR1025 + GR1052

GR1025 + GR1051

GR1046

Use 3mm 1x19 316 rigid wire (see p.105)

GR1025

Not recommended for situations where there is a risk to the watertightness of a building. E.g. PLASTER AND timber cladding.

130

Online catalogue: www.anzor.co.nz/foliage-systems www.anzor.co.nz/arch

FOLIAGE SYSTEM - SOLID WALL

SOLID WALL APPLICATIONS 1

Wire End Termination Garden Eye for solid wall - M8x25mm 316SS (GR1025)

Thread length - 25mm Spacing from wall - 100mm Thread size - 8mm

Dead End with grub screw 316SS (GR1051)

Loosen screws and thread wire in.

Drop-In Anchor - M8 316SS (DYDIM608 - see p.143)

Setting tool required for proper installation. NB. Setting Tool Sold Separately.

Garden Eye and Adjuster Eye Bolt for solid wall - M8x25mm 316SS (GR1025)

Thread length - 25mm Spacing from wall - 100mm Thread size - 8mm

Adjuster units 316SS (GR1052)

Gives 15mm of tensioning capability.

Drop-In Anchor - M8 316SS (DYDIM608 - see p.143)

Setting tool required for proper installation. NB. Setting Tool Sold Separately.

Middle supports (where required). Use for increased stability, if wire span is up to, but not greater than 2100mm and/or heavy plants will be attached.

Cross Clamp - M4 316SS (GR1044)

E X-STO EX TOCK CK SUBJ SU B JEC EC T T TO OP PR R IOR S SA ALLE E

Remove grub screw and insert wires and replace grub screw to secure. Use Loctite for permanent fixing.

Middle supports with stud (where required). Cross Clamp - M8 x 25mm 316SS (GR1046)

(see above) Use if wire span is greater than 2100mm, then install half way along the length of where the wires cross over.

Drop-In Anchor - M10 316SS (DYDIM610 - see p.143)

Setting tool required for proper installation. NB. Setting Tool Sold Separately.

Perimeter Supports Garden Eye for solid wall - M8x25mm 316SS (GR1025)

Thread length - 25mm Spacing from wall - 100mm Thread size - 8mm

Drop-In Anchor - M8 316SS (DYDIM608 - see p.143)

Setting tool required for proper installation. NB. Setting Tool Sold Separately.

Not recommended for situations where there is a risk to the watertightness of a building. E.g. Plaster and timber cladding.

Online catalogue: www.anzor.co.nz/foliage-systems www.anzor.co.nz/arch

131

FOLIAGE SYSTEM - TIMBER

TIMBER APPLICATIONS 1

Wire End Termination Garden Eye for timber 316SS (GR1027)

Thread length - 40mm Spacing from wall - 100mm Thread size - 8mm

Dead End with grub screw 316SS (GR1051)

Loosen screws and thread wire in

Garden Eye and Adjuster Garden Eye for timber 316SS (GR1027)

Thread length - 40mm Spacing from wall - 100mm Thread size - 8mm

Adjuster units 316SS (GR1052)

Gives 15mm of tensioning capability.

Internal Supports (where required) Use for increased stability, if wire span is up to, but not greater than 2100mm and/ or heavy plants will be attached.

Cross Clamp - M4 316SS (GR1044)

Remove grub screw and insert wires and replace grub screw to secure. Use Loctite for permanent fixing.

Internal Supports (where required) (see above) Use if wire span is greater than 2100mm, then install half way along the length of where the wires cross over.

Cross Clamp - M8 x 25mm 316SS (GR1046)

EX-STOCK SUBJEC T TO PR IOR SALE

External Supports Thread length - 40mm Spacing from wall - 100mm Thread size - 8mm

Eye Bolt for timber 316SS (GR1027)

N.B: Not recommended for timber cladding due to issues with water tightness.

GR1053 Foliage Spanner Used to tighten the collar of the garden eyes, which then works as a lock-nut to keep the eyes in the right position and prevent tampering with the system. Spanner sold separately Product code: FOLGR1053

132

Online catalogue: www.anzor.co.nz/foliage-systems www.anzor.co.nz/arch

FOLIAGE SYSTEM INSTALLATION

Installation GUIDE 1.

Before you start to install the system, we recommend you attach small nails where the eyes will be installed, and run strings between them to make sure you are happy with the pattern (you could base your pattern on that shown on p.128).

When you are satisfied with the pattern, drill the holes and install the eyes.

Thread the wires through the eyes in the same way as you did with the strings, to create the trellis system.

Attach the end fittings.

When you install the second wire, try to weave the wire into the first one by alternating between going over and under the first wire. This will minimise need for cross clamps.

When both wires are installed, tension the wires at the adjuster units.

If using wire cross over clamps install these last, after tensioning the system.

NB: The cross clamps stabalise the system at the crossings of the wires.This is needed if the wall span is more than 2 metres and/or the plants are heavy.

alternative foliage options Horizontal wire runs S3191P 316SS Mini M5 Jaw/ Swage Pipe Turnbuckle.

M6 Drop-In Anchors. 316 SS(DYDIM606)

(MFTBPJSMM605)

For wire length of no more than 3m, otherwise use S3121P-06.

3.0mm 7x19 316SS Flexible Wire. S3191 M6 x 60 304SS Eyebolts. (MFEBM406060)

(MFW030719)

M3 Nickle Plated Copper Wire Crimp. (MFWCM03N) Wire looped through eye + crimped. Not recommended for high loading.

TOOL HIRE - Anzor has hex swaging tools and crimping tools available to hire contact your local branch.

Not recommended for situations where there is a risk to the watertightness of a building. E.g. Plaster and timber cladding.

Online catalogue: www.anzor.co.nz/foliage-systems www.anzor.co.nz/arch

133

ALTERNATIVE FOLIAGE OPTIONS

alternative foliage SYSTEM options Vertical runs on columns - pictured on page 121

Vertical Run On Columns - up to 3.0m. S7801 - 3mm x M6 Swage Stud GR1052 Adjuster Unit

GR1052 Adjuster Unit 1x19 3mm Wire Rope

GR1025 Garden Eye.

M8 Drop-in Anchor

Possible Issue with Vertical Run On Columns over 3.0m Force

Force Garden eyes bend inwards when adjuster units over tightened.

Solution: Vertical Run On Columns over 3.0m. S3127P Pipe Turnbuckle plus swage stud (MFTBPFFM606)

Anzor ASS Wall Bracket (see next page)

Anzor ASS Wall Bracket

ASS Wall Bracket - helps reduce the load and prevent the garden eyes bending. See p.123 for full ASS Wall Bracket details.

134

Online catalogue: www.anzor.co.nz/foliage-systems www.anzor.co.nz/arch

ALTERNATIVE FOLIAGE OPTIONS

EX-STOCK SUBJEC T TO PR IOR SALE

ANZOR ASS WAll bracket

ASS Wall Bracket (product code: AWBY)

M12 Bolt & Nut

M12 Drop-in Anchor (Sold separately)

Anzor ASS Wall Bracket - Y Type •

Slim and unobtrusive design.

•

Can fit up to 5mm Eye Terminal.

•

Attach Eye Terminal at the top and S3121P Jaw Swape Pipe Turnbuckle at the bottom.

•

Made from 304 Stainless Steel.

•

Product code: AWBY.

Securing Screw + Nut (included with bracket)

S7802F Eye Terminal Wire size 3.0mm (MFSWET603)

S3127P Pipe Turnbuckle plus S7801 RH Swage Stud End Termination (MFTBPFFM606)

Depending on the length of wire and potential load, two turnbuckles may be required for tensioning.

ASS Wall Bracket - dimensions

LOCTITE

Size

d1 (mm)

d2 (mm)

d5 (mm)

s (mm)

70 x 13

8.5

We recommend applying Loctite 243 after installation for permanent fixture.

LOOKING FOR FASTENERS? See our complete range of fasteners at the back of this catalogue p.138

Online catalogue: www.anzor.co.nz/foliage-systems www.anzor.co.nz/arch

135

ALTERNATIVE FOLIAGE OPTIONS

EX-STOCK SUBJEC T TO PR IOR SALE

alternative foliage options WAll bracket - for connection with jaws 30mm

160mm

Ă&#x2DC;9mm 125mm

Vertical runs on columns

Wall Bracket with Jaws Hex Setscrew

M8x30 - 316SS (BHM408030S)

304SS (AWBJ)

Spacing from wall - 125mm Hole size - 9.5mm

Jaw/Swage Pipe Turnbuckle (S3121P)

Drop-In Anchors

M6 / 3.0mm - 316SS (MFTBPJSM606)

M8 - 316SS (DYDIM608)

Drop-in Anchor Setting Tool Required.

Wire Rope

3.0mm 1x19 316 Stainless Steel wire (MFW030119)

Swage Fork Terminal (S7803)

3mm - 316SS (MFSWFT403)

Eye Bolt (S3191) M8 x 130 - 304SS (MFEBM408130)

Not recommended for situations where there is a risk to the water tightness of a building. E.g. Plaster and timber cladding.

136

Online catalogue: www.anzor.co.nz/foliage-systems www.anzor.co.nz/arch

fasteners & fittings

DIVIDER INSERT HERE:

fasteners & fittings

ANZOR BOSLOK

ANZOR BOSLOK Stainless steel dOWN pipe wall clamps

E X-STO CK SU B J EC T TO PR IO R SA L E

BENEFITS •

NZ designed and manufactured

•

Easy installation - only hand tools required

•

Very flush, sleek finish for all applications

•

Available in 304 (ex-stock) or 316 (to order) stainless steel.

•

Product code: TFCB.

OPTION 1 - PLAIN SHANK FOR A clean, modern LOOK. Mounting Brackets Boslok Bracket Strap + Boslok Nuts

+ 55x90mm diamond shape Long - 200mm offset Short - 120mm offset Tool required for installation. Lengths can be trimmed on site with a hacksaw.

Small Bracket Strap Sizes: 3/8 (10mm OD) - 1” (25mm OD) Strap size 0.7x16mm Large Bracket Strap Sizes: 1” (25mm OD) - 6”(152mm OD) Strap size 0.7x16mm

OPTION 2 - THREADED SHANK FOR FLEXIBLE SHANK LENGTH Threaded Inserts

Threaded stud

Heavy Wall Plates

+ *Alternative option to mounting brackets for fixing wall plate to Boslok strap/nut

Small Nuts - M6 Large Nuts - M10 or M12

Small - 50x30mm Large - 55x90mm Other shapes/sizes can be made on request.

Boslok Bracket Strap + Boslok Nuts

+ Online catalogue: www.anzor.co.nz/boslok www.anzor.co.nz/arch

Small Bracket Strap Sizes: 3/8 (10mmOD) - 1” (25mmOD) Strap size 0.7x16mm Large Bracket Strap Sizes: 1” (25mmOD) - 6”(152mmOD) Strap size 0.7x16mm

139

FASTENERS FOR TIMBER

FASTENERS FOR TIMBER LAGSCREWS - 304 SS We carry a wide range of high quality 304 Stainless Steel Lagscrews.

LSM404070

Size (Ă&#x2DC; x L) M4 x 70

LM (mm) 30

LH (mm) 40

Drive (SW) (mm) None

LSM405080

M5 x 80

None

LSM406090

M6 x 90

None

LSM408050

M8 x 50

None

LSM408080

M8 x 80

Hex

Code

LSM408100

M8 x 100

Hex

LSM408130

M8 x 130

Flat

LSM410080

M10 x 80

Hex

LSM410100

M10 x 100

Hex

LSM410140

M10 x 140

Hex

LSM410150

M10 x 150

Hex

CSK COACHSCREWS - SOCKET DRIVE - 316 SS

140

Code

Size

SSHCKW610100

M10 x 100

SSHCKW610120

M10 x 120

SSHCKW610140

M10 x 140

Perfect for securing objects with high sideways loading onto timber. Larger diameter therefore greater shear strength than smaller woodscrews.

Online catalogue: www.anzor.co.nz www.anzor.co.nz/arch

FASTENERS FOR CONCRETE

FASTENERS FOR CONCRETE Anzor offers an extensive range of options for fastening to concrete.

• • • •

Studs for Chemical Anchors Chemical Anchor Cartridges Drop-In Anchors Sleeve Anchors

• • • •

Wedge Anchors Flush Head Anchors Mushroom Spikes Screw Bolts

Online catalogue www.anzor.co.nz

141

FASTENINGS TO CONCRETE

CHEMICAL ANCHORS WITH THREADED STUDS •

Hole drilled into concrete

•

Fischer chemical anchor injected.

ATTACHMENT OPTIONS

FEATURES •

No expansion force in base material unlike sleeve anchors.

•

Greater working load in tension than expandable anchors.

•

One or more of these could be attached to a Threaded Stud.

Round Washer

Hex Nut

Square Washer

Dome Nut

S3061 Eye Nut

Studs for chemical anchors available in M8, M10, M12, M16 & M20.

POLYESTER (300 mL) (Code: FIS P 300 T)

VINYLESTER (300 mL) (Code: FIS VS 300 T)

VINYLESTER (360 mL) (Code: FIS V 360 S)

EPOXY (390 mL) Code: FIS EM 390 S)

Type

Recommended Load*

Polyester

NrecM12=8.6kN

• Styrene free, low odour • For use with a commonly available caulking gun. • Leak proof cartridge for clean and safe handling. • Curing time of 60 minutes at 20° C.

NrecM12=14.8kN

• High performance, Styrene free, low odour. • For use with a commonly available caulking gun. • Leak proof cartridge for clean and safe handling. • Curing time of 60 minutes at 20° C.

NrecM12=14.8kN

• High performance, Styrene free, low odour. • Leak proof cartridge for clean and safe handling. • Curing time of 45 minutes at 20° C.

NrecM12=17.3kN

• High performance, Styrene free, low odour. • Leak proof cartridge for clean and safe handling. • Curing time of 10 hours at 20° C.

• Cheapest resin available • Poorest adhesion

Vinylester • More cost effective than epoxy resins • Moderate adhesion

epoxy • Incredible toughness and bonding strength

Features

* 20MPa concrete at 110mm (M12, grade 5.8 studs) embedment

142

Online catalogue: www.anzor.co.nz www.anzor.co.nz/arch

FASTENERS FOR CONCRETE

DROP-IN ANCHOR - 316 SS Drop-In Anchors have an internal thread for use with metric threaded fasteners (e.g. Hex Bolts) or Threaded Rod (stud). The anchor is placed into a pre-drilled hole in the concrete. A Setting Tool is then used to expand the anchor within the hole.

FEATURES •

Fast and easy installation.

•

Fasteners can be removed and replaced.

•

A Setting Tool is required for installation

COMMON FASTENERS USED WITH DROP-IN ANCHORS

S3061 Eye Nut

Threaded Stud

S3191 Eye Bolt

S307 Eye Bolt

Countersunk Socket Screw

Hex Setscrew

Button Socket Screw

Drop-In Anchor Performance Data Code

Thread Size

Anchor Diameter (mm)

Thread Depth (mm)

Anchor Length (mm)

Pull Out Load Safe Working (kN) Load (kN)

DYDIM606

9.32

2.32

DYDIM608

13.24

3.30

DYDIM610

M10

19.12

4.78

DYDIM612

M12

28.44

7.11

DYDIM616

M16

47.56

11.89

The test values above were obtained using 20 MPa non aggregated concrete.

Example of a Drop-In anchor application

Online catalogue: www.anzor.co.nz www.anzor.co.nz/arch

143

FASTENINGS TO CONCRETE

TECHNICAL DATA FOR FASTENERS COMMONLY USED WITH DROP-IN ANCHORS

S306 EYE BOLT - 316 SS

MFEBM606010

Size d mm 6

a mm 26

MFEBM608012

MFEBM610015

MFEBM612020

MFEBM616023

Code

b c D t mm mm mm mm 16 5 13 9

H mm 31

h mm 19

Breaking Load (kgs) 1100

1800

2600

3500

8000

H mm 28.3

h mm 13

Breaking Load (kgs) 1,100

Safe Working Load = 25% of Breaking Load

S3061 EYE NUT - 316 SS

MFENM606

Size d mm 6

a mm 26

MFENM608

33.3

1,300

MFENM620

41.5

10,500

MFENM612

3,500

MFENM616

8,000

MFENM620

10,500

Code

b c D t mm mm mm mm 16 5 13 4

Safe Working Load = 25% of Breaking Load

144

Online catalogue: www.anzor.co.nz www.anzor.co.nz/arch

FASTENERS FOR CONCRETE

S3191 EYE BOLT - 304 SS mm

MFEBM406040

Size mm AxL1 6 x 40

MFEBM406060

6 x 60

1000

MFEBM406080

6 x 80

105

1000

MFEBM406100

6 x 100

125

1000

MFEBM408060

8 x 60

1800

MFEBM408080

8 x 80

110

1800

MFEBM4080100

8 x 100

130

1800

MFEBM4080130

8 x 130

120

160

1800

MFEBM410080

10 x 80

120

2400

MFEBM4100100

10 x 100

140

2400

MFEBM4100120

10 x 120

110

160

2400

MFEBM4100150

10 x 150

140

190

2400

MFEBM412100

12 x 100

150

3500

MFEBM412120

12 x 120

110

170

3500

MFEBM412150

12 x 150

140

200

3500

Code

L L2 Breaking Load mm mm (kgs) 34 60 1000

Safe Working Load = 25% of Breaking Load

S307 EYE BOLT - 316 SS S307-06060

Size mm D1 x A 6 x 60

B mm 54

S307-06080

6 x 80

1100

S307-08080

8 x 80

1100

S307-08100

8 x 100

1300

S307-10100

10 x 100

2600

S307-12100

12 x 100

100

3500

S307-12120

12 x 120

105

3500

Code

C D mm mm 5 12

Breaking Load (kgs) 1100

Safe Working Load = 25% of Breaking Load

S444 EYE BOLT - 316 SS Code MFEBM606040S

Size mm

M6 x 40

Overall Length

Dia. of Hole

Thread Length

23.2

Online catalogue: www.anzor.co.nz www.anzor.co.nz/arch

145

FASTENINGS TO CONCRETE

HEX NUT SLEEVE ANCHOR - 316 SS Attachment Options

Countersunk Skt Barrel Nut

S3061 Eye Nut

Fastens Material to

Pull Out Load

Safe Working Load

7.85

1.96

6.5x60

7.85

1.96

8x40

11.77

2.94

DYM608065

8x65

11.77

2.94

DYM610040

10x40

16.67

4.17

DYM610050

10x50

16.67

4.17

DYM610075

10x75

16.67

4.17

DYM610100

10x100

16.67

4.17

DYM612060

12x60

M10

24.52

6.13

Code

Size

Hole Size

DYM606.5040

6.5x40

DYM606.5060 DYM608040

(mm)

(kN)

DYM612075

12x75

M10

24.52

6.13

DYM612100

12x100

M10

24.52

6.13

The test values above were obtained using 20 MPa non aggregated concrete.

FLUSH HEAD SLEEVE ANCHOR - 316 SS Alternative Head Options

Countersunk Socket Screw

Can swap Hex Setscrew for a Button or Csk Socket Screw or a M6 Joint Connector Bolt as a low profile option.

Button Socket Screw

M6 Joint Connector Bolt

Code

Size

Hole Size

Fastens Material up to (mm)

Pull Out Load (kN)

Safe Working Load (kN)

DYFHM608070

8x70

11.77

2.94

DYFHM610040

10x40

16.67

4.17

DYFHM610060

10x60

16.67

4.17

DYFHM610080

10x80

16.67

4.17

DYFHM610095

10x95

16.67

4.17

DYFHM612075

12x75

M10

24.52

6.13

The test values above were obtained using 20 MPa non aggregated concrete.

146

Online catalogue: www.anzor.co.nz www.anzor.co.nz/arch

FASTENERS FOR CONCRETE

WEDGE ANCHOR - 316 SS A Wedge Anchor is a true dimension, stud type expansion anchor its stud diameter is the same as the hole diameter.

ATTACHMENT OPTIONS

Countersunk Skt Barrel Nut

S3061 Eye Nut

Code

Size

Min. Embedment (mm)

Fastens Material up to (mm)

Pull Out Load (kN)

Safe Working Load (kN)

DYTM610075

M10x75

14.71

3.68

DYTM612080

M12x80

22.56

5.64

DYTM612100

M12x100

22.56

5.64

DYTM612120

M12x120

22.56

5.64

DYTM612140

M12x140

22.56

5.64

DYTM616100

M16x100

33.34

8.34

DYTM616140

M16x140

33.34

8.34

DYTM616175

M16x175

33.34

8.34

DYTM620120

M20x120

52.96

13.24

DYTM620160

M20x160

100

52.96

13.24

The test values above were obtained using 20 MPa non aggregated concrete.

CAST-IN ANCHOR FEATURES •

Cast into concrete tilt slab panels to provide internal threads in the panel.

•

Made to order (2 week delivery)

•

Product code: DYDCM6.......

SCREW BOLT - GALV Approved for 15kN bottom plate bracing, the Blue Tip Galv Screw Bolt gives immediate high strength loading with a shallow embedment.

FEATURES • • • •

Suitable for brick/concrete/blocks Removable and reusable. Vibration resistant. M10 x 140mm (Product Code: DYBSG10140BT)

•

Can be installed within 3x diameter minimum edge distance.

other sizes available on request.

Online catalogue: www.anzor.co.nz www.anzor.co.nz/arch

147

FASTENINGS TO CONCRETE

HEX WASHER FACE CONCRETE BOLT - 316 SS The Hex Washer Face Concrete Bolt gives immediate high strength loading and is ideal for closeto-edge installation as it can be installed within 3x diameter to edge of concrete.

FEATURES • • • •

316 Stainless Steel (tips are carbide steel). Removable and reusable. Can be installed within 3 x diameter minimum edge distance. Available in M8 x 80 (DYCB6H08080) & M10 x 100 (DYCB6H10100).

CSK CONCRETE BOLT - 316 SS The Csk Concrete Bolt gives immediate high strength loading and is ideal for close-to-edge installation as it can be installed within 3x diameter to edge of concrete.

FEATURES • • • • •

316 Stainless Steel (tips are carbide steel). Removable and reusable. Can be installed within 3 x diameter minimum edge distance. Allen Key drive. Available in M8 x 80 (DYCB6C08080).

MUSHROOM HEAD SPIKE - 316 SS Easily driven into drilled concrete. NB: Mushroom Head Spike requires the head to be sheared off to remove from attached material.

FEATURES • • •

148

316 Stainless Steel (tips are carbide steel). Easy installation. Available in 5mm (DYSM605) & 6.5mm (DYSM606.5).

Online catalogue: www.anzor.co.nz www.anzor.co.nz/arch

FASTENERS FOR CONCRETE

FISCHER SXS MASONRY SCREW + SLEEVE The first plastic plug with European Technical Approval for single point fixings in the cracked concrete tensile zone. Available in 316 Stainless Steel, with countersunk and hex washer face options for timber and metal applications.

Fischer SXS CSK - Product Code: FSCM6....

Fischer SXS HWF - Product Code: FSHM6....

FEATURES Perfect in interaction: the CO-NA-screw and the SXS-sleeve. High pressure in 4 directions The optimal allocation of the expansion forces to the surface of the bore hole is ensured by the expansion in 4 directions. By this in the cracked tension zone permissible loads up to 1,7 kN axial load have been reached. The permissible shear load amounts up to 3,0 kN. This means a maximum of safety even in an appearing crack.

Doesn’t spin round This feature prevents spinning of the sleeve during installation. While re-expanding it fixes the sleeve in its position.

Safety due to 3-zone screw: the CO-NA-screw. Safety zone 1: the expansion area By means of the innovative geometry of the thread with distinctive cones the expansion force increases depending on the external loads.

High flexibility for installation The CO-NA-screw fits for each application. It is available with counter sunk head and hexagon head with washer included.

Safety zone 2: the re-expansion area

Safety zone 3: the shaft

When a crack appears in the concrete the re-expansion zone with it’s extra strong shaped cones provides the active re-expansion of the fischer SXS.

The maximum screw diameter of the CO-NA-screw is situated exactly in the position of the bearing point. The cross section is about 20 % higher compared with the safety screw with 7 mm.

performance Permissible load Concrete ≥ B15 : 1.6 kN at 50 mm anchor depth.

Permissible bending moment: 316 Stainless Steel (A4): 15.3 Nm

Online catalogue: www.anzor.co.nz/fischer www.anzor.co.nz/arch

149

FASTENERS FOR CONCRETE

Areas of application FOR THE FISCHER SXS SCREW Suitable substrate materials: Concrete, aircrete, solid sand-lime brick, solid brick, solid clinker, solid pumice brick, hollow pumice blocks, plasterboard, natural stone. For wooden structures: Fischer SXS-T with Fischer CO-NA countersunkhead screw. Attachment of: square beams, wooden laths, strips, faรงades and wooden roof constructions.

For metal constructions: Fischer SXS-F US with flat fixing edge and Fischer CONA screw with hexagon head and integral washer. For fastening: metal and plastic profiles, door and window frames, insulants, sheet metal, panelling, etc.

SXS technical data CSK TORX SXS FISCHER SCREW Size

M10 M10 M10 M10 M10 M10 M10 M10 M10

x x x x x x x x x

80 100 120 140 160 180 200 230 260

Drill-x

Min. drill Effect. anchorhole depth age depth

Anchor length

HWF TORX SXS FISCHER SCREW

Max. usable fischer length CO-NA-screws

[mm]

10 10 10 10 10 10 10 10 10

90 110 130 150 170 190 210 240 270

50 50 50 50 50 50 50 50 50

80 100 120 140 160 180 200 230 260

30 50 70 90 110 130 150 180 210

7 x 87 7 x 107 7 x 127 7 x 147 7 x 167 7 x 187 7 x 207 7 x 237 7 x 267

Size

M10 x 60T M10 x 80T M10 x 100T M10 x 120T M10 x 140T M10 x 160T M10 x 180T M10 x 200H M10 x 230H M10 x 260H

Drill-x

Min. drill Effect. anchorhole depth age depth

Anchor length

[mm]

10 10 10 10 10 10 10 10 10 10

70 90 110 130 150 170 190 210 240 270

50 50 50 50 50 50 50 50 50 50

60 80 100 120 140 160 180 200 230 260

10 30 50 70 90 110 130 150 180 210

7 x 69 7 x 89 7 x 109 7 x 129 7 x 149 7 x 169 7 x 189 7 x 207 7 x 237 7 x 267

T = Hex Washer Face torx, H = Hexagon-Head Screw.

150

Max. usable fischer length CO-NA-screws

Online catalogue: www.anzor.co.nz/fischer

FASTENERS FOR CONCRETE

Technical Data - LOADs Mean ultimate loads, design resistant and recommended loads for single anchors of Fischer Long-shaft SXS with large axial spacing and edge distance. Anzor only carries in stock - 316 Stainless Steel. Material

Anchor Size

Non-cracked concrete

Cracked Concrete

SXS 10 30 / 50

SXS 10 50 / 80

30 / 50

50 / 80

Temperature range: short-term/long-term

°C

Effective anchorage depth

heff

(mm)

Nominate acnchorage depth

hnom

(mm)

Drill hole depth

h1 >

(mm)

Drill hole diameter

(mm)

Mean ultimate loads Nu (kN) Tensile

Shear

(kN)

gvz

12.8

8.3

10.4

6.7

(kN)

fvz

6.4

4.2

(kN)

316

12.8

8.3

10.4

6.7

(kN)

gvz

13.8

11.7

13.8

11.7

(kN)

fvz

6.9

5.9

(kN)

316

13.8

11.7

13.8

11.7

1.7

Design resistant loads NRd (kN) Tensile

Shear

NRd

(kN)

gvz

3.3

2.2

2.8

NRd

(kN)

fvz

1.7

1.1

NRd

(kN)

316

3.3

2.2

2.8

1.7

VRd

(kN)

gvz

5.0

4.2

5.0

4.2

VRd

(kN)

fvz

2.5

2.1

VRd

(kN)

316

5.0

4.2

5.0

4.2

1.2

Recommended loads Nrec (kN) Tensile

Shear

Nrec

(kN)

gvz

2.4

1.6

2.0

Nrec

(kN)

fvz

1.2

0.8

Nrec

(kN)

316

2.4

1.6

2.0

1.2

Vrec

(kN)

gvz

3.6

3.0

3.6

3.0

Vrec

(kN)

fvz

1.8

1.5

Vrec

(kN)

316

3.6

3.0

3.6

3.0

Mrec

(Nm)

gvz

16.3

Mrec

(Nm)

fvz

10.1

Mrec

(Nm)

316

15.8

Recommended bending moment Mrec (Nm) 16.3

Component dimensions, minimum axial spacings and edge distances Min. structural component thickness 1)

Min. axial spacing 1)

Min. edge distance 1)

hmin

(mm)

100

140

100

140

smin

(mm)

for C≥

(mm)

100

cmin

(mm)

for S≥

(mm)

250

200

250

200

* steel failure decisive 1) For min. axial spacing and min. edge distance the above described loads have to be reduced! All load values apply for concrete C20/25 without edge or spacing influence. Design resistant loads: material safety factor YM is included. Material Safety factor YM depends on type of anchor. Recommended loads: material safety factor YM and safety factor for load YL - 1.4 are included.

Online catalogue: www.anzor.co.nz/fischer www.anzor.co.nz/arch

151

FASTENERS FOR CONCRETE

Mean ultimate loads and recommended loads of Fischer Long-shaft fixings. Fixing Type

SXS 10

Anchorage depth

(mm)

Drill-hole depth

(mm)

Drill Ø

(mm)

Nu.m

(kN)

12.3 6)

Nrec

(kN)

1.6 6)

Nu.m

(kN)

6.5 6)

Nrec

(kN)

1.0 6)

Nu.m

(kN)

12.3 6)

Nrec

(kN)

2.0 5)

Concrete

≥ C12/15

Solid brick (DIN 105)

≥ Mz12

Solid sand-lime brick (DIN 105)

≥ KS12 ≥ Hb12

Hallow block (lightweight concrete, DIN 18151) 2)

Recommended bending moments 3)

Nu.m

(kN)

- 11)

Nrec

(kN)

0.25

zinc plated

(Nm)

16.3

316*

(Nm)

15.8

* Anzor carries in stock - 316 Stainless Steel only.

Spacings and component dimensions Fixing Type

SXS 10

Concrete

Single plug 9)

Axial spacing

a≥

Edge spacing

ar ≥

ai ≥

ag ≥

ar ≥

Axial spacing

Pair of plugs 9)

Edge spacing Min. component thickness Masonry

Axial spacing Edge distance

for loaded masonry 11)

ar ≥

for non loaded masonry 11)

ar ≥

25/3 12)

11.5

Min. component thickness

2) The expanding part of the fixing must anchor in the wall of the brick. 3) With simultaneous tensile load, the bending moment must be reduced. 5) In aerated concrete, the hole should be made using the special punch provided. 6) For hot-dip galvanized safety screws the value has to be reduced by 50%. 9) See product illustration below. 11) And edge distance to non-mortared joints. 12) Edge distance to mortared joints only.

Component dimensions a) with single plugs

b) with a pair of plugs d

152

ar ai ai

Online catalogue: www.anzor.co.nz/fischer www.anzor.co.nz/arch