Reliable Partner de and Logistics in Industry, Tra
COMPETENCE IN INDUSTRIAL FLOORING FOR 35 YEARS
YOUR SPECIALIST FOR REPAIRING FLOORS
Do surface spalling, broken joints and broken out cracks cause you problems again and again in your daily business?
WE HAVE THE PERMANENT AND ECONOMIC SOLUTION. Our trained personnel are available to you for analysis, advice and implementation.
CBL-CHEMOBAU.DE
CBL Chemobau Industrieboden GmbH Maybachstrasse 14-18 . D-74211 Leingarten Phone: +49 (0) 7131 90500 . Fax: +49 (0) 7131 9050444 info@cbl-chemobau.de . www.cbl-chemobau.de
KS
+ NG
NESS
PE
E TO TS
OF GE
TO S
Reliable Partner de and Logistics in Industry, Tra
COMPETENCE IN INDUSTRIAL FLOORING FOR 35 YEARS REASONS FOR REPAIRING INDUSTRIAL FLOORING – – – – – – – –
TYPE OF DAMAGE
UNEVENNESS
SLOPE
RISK OF SLIPPAGE
DAMAGE TO JOINTS
SLOPE UNEVENNESS
SLOPE
DAMAGE TO JOINTS
DAMAGE TO JOINTS
RISK OF SLIPPAGE
RISK OF SLIPPAGE
DAMAGE TO SURFACES
DAMAGE TO SURFACES
BROKEN EDGES + TRIPPING EDGES
RISK OF SLIPPAGE DAMAGE TO JOINTS
RISK OF SLIPPAGE
DAMAGE TO SURFACES
BROKEN EDGES + TRIPPING EDGES
VISUAL DEFECTS
DAMAGE TO SURFACES RISK OF SLIPPAGE
DAMAGE TO SURFACES
BROKEN EDGES + TRIPPING EDGES
VISUAL DEFECTS
CRACKS CRACKS
VOIDS + SPALLING
VOIDS + SPALLING
UNEVENNESS
UNEVENNESS
SLOPE
BROKEN EDGES + TRIPPING EDGES DAMAGE TO SURFACES
BROKEN EDGES + TRIPPING EDGES
DAMAGE TO SURFACES
BROKEN EDGES + TRIPPING EDGES
VISUAL DEFECTS
BROKEN EDGES + TRIPPING EDGES
VISUAL DEFECTS
• Clean the sides of the joint • Reprofile the joint edges • Permanently elastic or bonded grouting of the joint
VISUAL DEFECTS
• Clean surface • Structure or restore the surface acc. to accident prevention regulations / trade association • Remove old surface coating • Clean base and cover the surface acc. to the operational requirements with a new coating
SLOPE
DAMAGE TO JOINTS
DAMAGE TO JOINTS
RISK OF SLIPPAGE
DAMAGE TO SURFACES
BROKEN EDGES + TRIPPING EDGES
VISUAL DEFECTS
• Restrict and remove loose materials and clean the bearing subsurface • Renew the surface coating with tight bond to the subsurface
RISK OF SLIPPAGE
DAMAGE TO SURFACES
BROKEN EDGES + TRIPPING EDGES
VISUAL DEFECTS
• Select and install a suitable joint profile • Level out height differences
VISUAL DEFECTS
VISUAL DEFECTS BROKEN EDGES + TRIPPING EDGES
• Measure and compare with the DIN codes • Grind down high spots or install completely new surface • Repair partial uneven areas
• Clean the sides of the crack • Bonding grout or injection with a low viscosity reaction resin
VOIDS + SPALLING CRACKS
SAVING RESOURCES REDUCING COSTS PLANNING SAFETY INCREASE IN EFFICIENCY
• Measure and compare with requirements • Resurface depending on the operational needs
DAMAGE TO JOINTS SLOPE
• • • •
OUR SOLUTION
UNEVENNESS VOIDS + SPALLING
YOUR ADDED VALUE:
Over time a continual increase in the problems Risk of complete failure of the production systems and storage areas Health and accident risk Increased cleaning costs Damage to machines, vehicles and products Danger of contamination of the underground Flooring becomes unsightly with time Increase of the utility value by modernisation
• Grind down the damaged surface • Polish and treat with lithium impregnation
VISUAL DEFECTS
CBL-CHEMOBAU.DE
CBL Chemobau Industrieboden GmbH Maybachstrasse 14-18 . D-74211 Leingarten Phone: +49 (0) 7131 90500 . Fax: +49 (0) 7131 9050444 info@cbl-chemobau.de . www.cbl-chemobau.de